* [dpdk-dev] checking packet drop at NIC @ 2014-01-28 5:29 Sharath 2014-01-29 15:24 ` Daniel Kaminsky 0 siblings, 1 reply; 10+ messages in thread From: Sharath @ 2014-01-28 5:29 UTC (permalink / raw) To: dev hi ! can someone please tell me whether the DPDK provides any method to handle below a. account the packet drops at NIC level ? is there any interrupt raised by DPDK for the same ? b. to check fifo errors ? c. way to check rx and tx in sync Tx, -SB ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-dev] checking packet drop at NIC 2014-01-28 5:29 [dpdk-dev] checking packet drop at NIC Sharath @ 2014-01-29 15:24 ` Daniel Kaminsky 2014-01-30 9:00 ` Sharath 0 siblings, 1 reply; 10+ messages in thread From: Daniel Kaminsky @ 2014-01-29 15:24 UTC (permalink / raw) To: Sharath; +Cc: dev Hi Sharath, Try rte_eth_stats_get, I think this should give you what you're looking for. Regards, Daniel On Tue, Jan 28, 2014 at 7:29 AM, Sharath <sharathjm.bharadwaj@gmail.com>wrote: > hi ! > > can someone please tell me whether the DPDK provides any method to handle > below > > a. account the packet drops at NIC level ? is there any interrupt raised by > DPDK for the same ? > b. to check fifo errors ? > c. way to check rx and tx in sync > > Tx, > -SB > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-dev] checking packet drop at NIC 2014-01-29 15:24 ` Daniel Kaminsky @ 2014-01-30 9:00 ` Sharath 2014-01-30 11:20 ` Sharath 0 siblings, 1 reply; 10+ messages in thread From: Sharath @ 2014-01-30 9:00 UTC (permalink / raw) To: Daniel Kaminsky; +Cc: dev Thanks Daniel ! Let me check it out . . . On Jan 29, 2014 8:54 PM, "Daniel Kaminsky" < daniel.kaminsky@infinitelocality.com> wrote: > Hi Sharath, > > Try rte_eth_stats_get, I think this should give you what you're looking > for. > > Regards, > Daniel > > > On Tue, Jan 28, 2014 at 7:29 AM, Sharath <sharathjm.bharadwaj@gmail.com>wrote: > >> hi ! >> >> can someone please tell me whether the DPDK provides any method to handle >> below >> >> a. account the packet drops at NIC level ? is there any interrupt raised >> by >> DPDK for the same ? >> b. to check fifo errors ? >> c. way to check rx and tx in sync >> >> Tx, >> -SB >> > > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-dev] checking packet drop at NIC 2014-01-30 9:00 ` Sharath @ 2014-01-30 11:20 ` Sharath 2014-01-31 6:05 ` Sharath 0 siblings, 1 reply; 10+ messages in thread From: Sharath @ 2014-01-30 11:20 UTC (permalink / raw) To: Daniel Kaminsky; +Cc: dev hi! are there any interrupts which are raised by DPDK, for the fifo errors. please let me know, where can I find the details and how to handle such interrupts ? Tx -SB On Thu, Jan 30, 2014 at 2:30 PM, Sharath <sharathjm.bharadwaj@gmail.com>wrote: > Thanks Daniel ! > Let me check it out . . . > On Jan 29, 2014 8:54 PM, "Daniel Kaminsky" < > daniel.kaminsky@infinitelocality.com> wrote: > >> Hi Sharath, >> >> Try rte_eth_stats_get, I think this should give you what you're looking >> for. >> >> Regards, >> Daniel >> >> >> On Tue, Jan 28, 2014 at 7:29 AM, Sharath <sharathjm.bharadwaj@gmail.com>wrote: >> >>> hi ! >>> >>> can someone please tell me whether the DPDK provides any method to handle >>> below >>> >>> a. account the packet drops at NIC level ? is there any interrupt raised >>> by >>> DPDK for the same ? >>> b. to check fifo errors ? >>> c. way to check rx and tx in sync >>> >>> Tx, >>> -SB >>> >> >> ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-dev] checking packet drop at NIC 2014-01-30 11:20 ` Sharath @ 2014-01-31 6:05 ` Sharath 2014-01-31 7:06 ` Vladimir Medvedkin 0 siblings, 1 reply; 10+ messages in thread From: Sharath @ 2014-01-31 6:05 UTC (permalink / raw) To: Daniel Kaminsky; +Cc: dev Hi Daniel & all, can anyone please let me know about this. Tx -SB On Thu, Jan 30, 2014 at 4:50 PM, Sharath <sharathjm.bharadwaj@gmail.com>wrote: > hi! > > are there any interrupts which are raised by DPDK, for the fifo errors. > > please let me know, where can I find the details and how to handle such > interrupts ? > > Tx > -SB > > > On Thu, Jan 30, 2014 at 2:30 PM, Sharath <sharathjm.bharadwaj@gmail.com>wrote: > >> Thanks Daniel ! >> Let me check it out . . . >> On Jan 29, 2014 8:54 PM, "Daniel Kaminsky" < >> daniel.kaminsky@infinitelocality.com> wrote: >> >>> Hi Sharath, >>> >>> Try rte_eth_stats_get, I think this should give you what you're looking >>> for. >>> >>> Regards, >>> Daniel >>> >>> >>> On Tue, Jan 28, 2014 at 7:29 AM, Sharath <sharathjm.bharadwaj@gmail.com>wrote: >>> >>>> hi ! >>>> >>>> can someone please tell me whether the DPDK provides any method to >>>> handle >>>> below >>>> >>>> a. account the packet drops at NIC level ? is there any interrupt >>>> raised by >>>> DPDK for the same ? >>>> b. to check fifo errors ? >>>> c. way to check rx and tx in sync >>>> >>>> Tx, >>>> -SB >>>> >>> >>> > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-dev] checking packet drop at NIC 2014-01-31 6:05 ` Sharath @ 2014-01-31 7:06 ` Vladimir Medvedkin 2014-01-31 7:26 ` Sharath 0 siblings, 1 reply; 10+ messages in thread From: Vladimir Medvedkin @ 2014-01-31 7:06 UTC (permalink / raw) To: Sharath; +Cc: dev Hi Sharath, In DPDK interrupts are disabled to eliminate the performance overhead. Interrupts used only for link status change. So you can poll rte_eth_stats_get and check struct rte_eth_stats for errors. Regards, Vladimir 2014-01-31 Sharath <sharathjm.bharadwaj@gmail.com> > Hi Daniel & all, > > can anyone please let me know about this. > > Tx > -SB > > > On Thu, Jan 30, 2014 at 4:50 PM, Sharath <sharathjm.bharadwaj@gmail.com > >wrote: > > > hi! > > > > are there any interrupts which are raised by DPDK, for the fifo errors. > > > > please let me know, where can I find the details and how to handle such > > interrupts ? > > > > Tx > > -SB > > > > > > On Thu, Jan 30, 2014 at 2:30 PM, Sharath <sharathjm.bharadwaj@gmail.com > >wrote: > > > >> Thanks Daniel ! > >> Let me check it out . . . > >> On Jan 29, 2014 8:54 PM, "Daniel Kaminsky" < > >> daniel.kaminsky@infinitelocality.com> wrote: > >> > >>> Hi Sharath, > >>> > >>> Try rte_eth_stats_get, I think this should give you what you're looking > >>> for. > >>> > >>> Regards, > >>> Daniel > >>> > >>> > >>> On Tue, Jan 28, 2014 at 7:29 AM, Sharath < > sharathjm.bharadwaj@gmail.com>wrote: > >>> > >>>> hi ! > >>>> > >>>> can someone please tell me whether the DPDK provides any method to > >>>> handle > >>>> below > >>>> > >>>> a. account the packet drops at NIC level ? is there any interrupt > >>>> raised by > >>>> DPDK for the same ? > >>>> b. to check fifo errors ? > >>>> c. way to check rx and tx in sync > >>>> > >>>> Tx, > >>>> -SB > >>>> > >>> > >>> > > > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-dev] checking packet drop at NIC 2014-01-31 7:06 ` Vladimir Medvedkin @ 2014-01-31 7:26 ` Sharath 2014-02-06 5:50 ` Sharath 0 siblings, 1 reply; 10+ messages in thread From: Sharath @ 2014-01-31 7:26 UTC (permalink / raw) To: Vladimir Medvedkin; +Cc: dev thank you Vladimir. On Fri, Jan 31, 2014 at 12:36 PM, Vladimir Medvedkin <medvedkinv@gmail.com>wrote: > Hi Sharath, > > In DPDK interrupts are disabled to eliminate the performance overhead. > Interrupts used only for link status change. So you can poll > rte_eth_stats_get and check struct rte_eth_stats for errors. > > Regards, > Vladimir > > > > 2014-01-31 Sharath <sharathjm.bharadwaj@gmail.com> > > Hi Daniel & all, >> >> can anyone please let me know about this. >> >> Tx >> -SB >> >> >> On Thu, Jan 30, 2014 at 4:50 PM, Sharath <sharathjm.bharadwaj@gmail.com >> >wrote: >> >> > hi! >> > >> > are there any interrupts which are raised by DPDK, for the fifo errors. >> > >> > please let me know, where can I find the details and how to handle such >> > interrupts ? >> > >> > Tx >> > -SB >> > >> > >> > On Thu, Jan 30, 2014 at 2:30 PM, Sharath <sharathjm.bharadwaj@gmail.com >> >wrote: >> > >> >> Thanks Daniel ! >> >> Let me check it out . . . >> >> On Jan 29, 2014 8:54 PM, "Daniel Kaminsky" < >> >> daniel.kaminsky@infinitelocality.com> wrote: >> >> >> >>> Hi Sharath, >> >>> >> >>> Try rte_eth_stats_get, I think this should give you what you're >> looking >> >>> for. >> >>> >> >>> Regards, >> >>> Daniel >> >>> >> >>> >> >>> On Tue, Jan 28, 2014 at 7:29 AM, Sharath < >> sharathjm.bharadwaj@gmail.com>wrote: >> >>> >> >>>> hi ! >> >>>> >> >>>> can someone please tell me whether the DPDK provides any method to >> >>>> handle >> >>>> below >> >>>> >> >>>> a. account the packet drops at NIC level ? is there any interrupt >> >>>> raised by >> >>>> DPDK for the same ? >> >>>> b. to check fifo errors ? >> >>>> c. way to check rx and tx in sync >> >>>> >> >>>> Tx, >> >>>> -SB >> >>>> >> >>> >> >>> >> > >> > > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-dev] checking packet drop at NIC 2014-01-31 7:26 ` Sharath @ 2014-02-06 5:50 ` Sharath 2014-02-07 5:43 ` Sharath 0 siblings, 1 reply; 10+ messages in thread From: Sharath @ 2014-02-06 5:50 UTC (permalink / raw) To: Vladimir Medvedkin; +Cc: dev hi Vladimir, I would like to know if there are any callback mechanism to detect FIFO errors in NIC ? could you please let me know. Tx -SB On Fri, Jan 31, 2014 at 12:56 PM, Sharath <sharathjm.bharadwaj@gmail.com>wrote: > thank you Vladimir. > > > On Fri, Jan 31, 2014 at 12:36 PM, Vladimir Medvedkin <medvedkinv@gmail.com > > wrote: > >> Hi Sharath, >> >> In DPDK interrupts are disabled to eliminate the performance overhead. >> Interrupts used only for link status change. So you can poll >> rte_eth_stats_get and check struct rte_eth_stats for errors. >> >> Regards, >> Vladimir >> >> >> >> 2014-01-31 Sharath <sharathjm.bharadwaj@gmail.com> >> >> Hi Daniel & all, >>> >>> can anyone please let me know about this. >>> >>> Tx >>> -SB >>> >>> >>> On Thu, Jan 30, 2014 at 4:50 PM, Sharath <sharathjm.bharadwaj@gmail.com >>> >wrote: >>> >>> > hi! >>> > >>> > are there any interrupts which are raised by DPDK, for the fifo errors. >>> > >>> > please let me know, where can I find the details and how to handle such >>> > interrupts ? >>> > >>> > Tx >>> > -SB >>> > >>> > >>> > On Thu, Jan 30, 2014 at 2:30 PM, Sharath < >>> sharathjm.bharadwaj@gmail.com>wrote: >>> > >>> >> Thanks Daniel ! >>> >> Let me check it out . . . >>> >> On Jan 29, 2014 8:54 PM, "Daniel Kaminsky" < >>> >> daniel.kaminsky@infinitelocality.com> wrote: >>> >> >>> >>> Hi Sharath, >>> >>> >>> >>> Try rte_eth_stats_get, I think this should give you what you're >>> looking >>> >>> for. >>> >>> >>> >>> Regards, >>> >>> Daniel >>> >>> >>> >>> >>> >>> On Tue, Jan 28, 2014 at 7:29 AM, Sharath < >>> sharathjm.bharadwaj@gmail.com>wrote: >>> >>> >>> >>>> hi ! >>> >>>> >>> >>>> can someone please tell me whether the DPDK provides any method to >>> >>>> handle >>> >>>> below >>> >>>> >>> >>>> a. account the packet drops at NIC level ? is there any interrupt >>> >>>> raised by >>> >>>> DPDK for the same ? >>> >>>> b. to check fifo errors ? >>> >>>> c. way to check rx and tx in sync >>> >>>> >>> >>>> Tx, >>> >>>> -SB >>> >>>> >>> >>> >>> >>> >>> > >>> >> >> > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-dev] checking packet drop at NIC 2014-02-06 5:50 ` Sharath @ 2014-02-07 5:43 ` Sharath 2014-02-07 9:13 ` Richardson, Bruce 0 siblings, 1 reply; 10+ messages in thread From: Sharath @ 2014-02-07 5:43 UTC (permalink / raw) To: Vladimir Medvedkin; +Cc: dev hi all, can anyone please let me know about this ?? Tx, -SB On Thu, Feb 6, 2014 at 11:20 AM, Sharath <sharathjm.bharadwaj@gmail.com>wrote: > hi Vladimir, > > I would like to know if there are any callback mechanism to detect FIFO > errors in NIC ? > could you please let me know. > > Tx > -SB > > > On Fri, Jan 31, 2014 at 12:56 PM, Sharath <sharathjm.bharadwaj@gmail.com>wrote: > >> thank you Vladimir. >> >> >> On Fri, Jan 31, 2014 at 12:36 PM, Vladimir Medvedkin < >> medvedkinv@gmail.com> wrote: >> >>> Hi Sharath, >>> >>> In DPDK interrupts are disabled to eliminate the performance overhead. >>> Interrupts used only for link status change. So you can poll >>> rte_eth_stats_get and check struct rte_eth_stats for errors. >>> >>> Regards, >>> Vladimir >>> >>> >>> >>> 2014-01-31 Sharath <sharathjm.bharadwaj@gmail.com> >>> >>> Hi Daniel & all, >>>> >>>> can anyone please let me know about this. >>>> >>>> Tx >>>> -SB >>>> >>>> >>>> On Thu, Jan 30, 2014 at 4:50 PM, Sharath <sharathjm.bharadwaj@gmail.com >>>> >wrote: >>>> >>>> > hi! >>>> > >>>> > are there any interrupts which are raised by DPDK, for the fifo >>>> errors. >>>> > >>>> > please let me know, where can I find the details and how to handle >>>> such >>>> > interrupts ? >>>> > >>>> > Tx >>>> > -SB >>>> > >>>> > >>>> > On Thu, Jan 30, 2014 at 2:30 PM, Sharath < >>>> sharathjm.bharadwaj@gmail.com>wrote: >>>> > >>>> >> Thanks Daniel ! >>>> >> Let me check it out . . . >>>> >> On Jan 29, 2014 8:54 PM, "Daniel Kaminsky" < >>>> >> daniel.kaminsky@infinitelocality.com> wrote: >>>> >> >>>> >>> Hi Sharath, >>>> >>> >>>> >>> Try rte_eth_stats_get, I think this should give you what you're >>>> looking >>>> >>> for. >>>> >>> >>>> >>> Regards, >>>> >>> Daniel >>>> >>> >>>> >>> >>>> >>> On Tue, Jan 28, 2014 at 7:29 AM, Sharath < >>>> sharathjm.bharadwaj@gmail.com>wrote: >>>> >>> >>>> >>>> hi ! >>>> >>>> >>>> >>>> can someone please tell me whether the DPDK provides any method to >>>> >>>> handle >>>> >>>> below >>>> >>>> >>>> >>>> a. account the packet drops at NIC level ? is there any interrupt >>>> >>>> raised by >>>> >>>> DPDK for the same ? >>>> >>>> b. to check fifo errors ? >>>> >>>> c. way to check rx and tx in sync >>>> >>>> >>>> >>>> Tx, >>>> >>>> -SB >>>> >>>> >>>> >>> >>>> >>> >>>> > >>>> >>> >>> >> > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-dev] checking packet drop at NIC 2014-02-07 5:43 ` Sharath @ 2014-02-07 9:13 ` Richardson, Bruce 0 siblings, 0 replies; 10+ messages in thread From: Richardson, Bruce @ 2014-02-07 9:13 UTC (permalink / raw) To: Sharath, Vladimir Medvedkin; +Cc: dev The Intel DPDK does not at present support interrupts for dropped packets. Only support for link status change interrupts are supported at this time, but since the basics are there, it is possible with a bit of work to add handling for other interrupts if so needed. Regards, /Bruce > -----Original Message----- > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Sharath > Sent: Friday, February 07, 2014 5:44 AM > To: Vladimir Medvedkin > Cc: dev@dpdk.org > Subject: Re: [dpdk-dev] checking packet drop at NIC > > hi all, > can anyone please let me know about this ?? > > Tx, > -SB > > > On Thu, Feb 6, 2014 at 11:20 AM, Sharath > <sharathjm.bharadwaj@gmail.com>wrote: > > > hi Vladimir, > > > > I would like to know if there are any callback mechanism to detect > > FIFO errors in NIC ? > > could you please let me know. > > > > Tx > > -SB > > > > > > On Fri, Jan 31, 2014 at 12:56 PM, Sharath > <sharathjm.bharadwaj@gmail.com>wrote: > > > >> thank you Vladimir. > >> > >> > >> On Fri, Jan 31, 2014 at 12:36 PM, Vladimir Medvedkin < > >> medvedkinv@gmail.com> wrote: > >> > >>> Hi Sharath, > >>> > >>> In DPDK interrupts are disabled to eliminate the performance overhead. > >>> Interrupts used only for link status change. So you can poll > >>> rte_eth_stats_get and check struct rte_eth_stats for errors. > >>> > >>> Regards, > >>> Vladimir > >>> > >>> > >>> > >>> 2014-01-31 Sharath <sharathjm.bharadwaj@gmail.com> > >>> > >>> Hi Daniel & all, > >>>> > >>>> can anyone please let me know about this. > >>>> > >>>> Tx > >>>> -SB > >>>> > >>>> > >>>> On Thu, Jan 30, 2014 at 4:50 PM, Sharath > >>>> <sharathjm.bharadwaj@gmail.com > >>>> >wrote: > >>>> > >>>> > hi! > >>>> > > >>>> > are there any interrupts which are raised by DPDK, for the fifo > >>>> errors. > >>>> > > >>>> > please let me know, where can I find the details and how to > >>>> > handle > >>>> such > >>>> > interrupts ? > >>>> > > >>>> > Tx > >>>> > -SB > >>>> > > >>>> > > >>>> > On Thu, Jan 30, 2014 at 2:30 PM, Sharath < > >>>> sharathjm.bharadwaj@gmail.com>wrote: > >>>> > > >>>> >> Thanks Daniel ! > >>>> >> Let me check it out . . . > >>>> >> On Jan 29, 2014 8:54 PM, "Daniel Kaminsky" < > >>>> >> daniel.kaminsky@infinitelocality.com> wrote: > >>>> >> > >>>> >>> Hi Sharath, > >>>> >>> > >>>> >>> Try rte_eth_stats_get, I think this should give you what you're > >>>> looking > >>>> >>> for. > >>>> >>> > >>>> >>> Regards, > >>>> >>> Daniel > >>>> >>> > >>>> >>> > >>>> >>> On Tue, Jan 28, 2014 at 7:29 AM, Sharath < > >>>> sharathjm.bharadwaj@gmail.com>wrote: > >>>> >>> > >>>> >>>> hi ! > >>>> >>>> > >>>> >>>> can someone please tell me whether the DPDK provides any > >>>> >>>> method to handle below > >>>> >>>> > >>>> >>>> a. account the packet drops at NIC level ? is there any > >>>> >>>> interrupt raised by DPDK for the same ? > >>>> >>>> b. to check fifo errors ? > >>>> >>>> c. way to check rx and tx in sync > >>>> >>>> > >>>> >>>> Tx, > >>>> >>>> -SB > >>>> >>>> > >>>> >>> > >>>> >>> > >>>> > > >>>> > >>> > >>> > >> > > ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2014-02-07 9:12 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2014-01-28 5:29 [dpdk-dev] checking packet drop at NIC Sharath 2014-01-29 15:24 ` Daniel Kaminsky 2014-01-30 9:00 ` Sharath 2014-01-30 11:20 ` Sharath 2014-01-31 6:05 ` Sharath 2014-01-31 7:06 ` Vladimir Medvedkin 2014-01-31 7:26 ` Sharath 2014-02-06 5:50 ` Sharath 2014-02-07 5:43 ` Sharath 2014-02-07 9:13 ` Richardson, Bruce
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).