From: David Marchand <david.marchand@redhat.com>
To: Serhii Iliushyk <sil-plv@napatech.com>
Cc: dev@dpdk.org, mko-plv@napatech.com, ckm@napatech.com,
stephen@networkplumber.org,
Thomas Monjalon <thomas@monjalon.net>
Subject: Re: [PATCH v1 20/32] net/ntnic: add clock init
Date: Wed, 5 Mar 2025 18:03:27 +0100 [thread overview]
Message-ID: <CAJFAV8xtMHZfXo3c8vw0LG9-Cg4v8LCKjP8+psm=sJ3XoFzyNw@mail.gmail.com> (raw)
In-Reply-To: <20250220220406.3925597-21-sil-plv@napatech.com>
On Thu, Feb 20, 2025 at 11:06 PM Serhii Iliushyk <sil-plv@napatech.com> wrote:
> diff --git a/drivers/net/ntnic/nthw/core/include/NT400D13_U62_Si5332-GM2-RevD-1_V5-Registers.h b/drivers/net/ntnic/nthw/core/include/NT400D13_U62_Si5332-GM2-RevD-1_V5-Registers.h
> new file mode 100644
> index 0000000000..f87828fcfe
> --- /dev/null
> +++ b/drivers/net/ntnic/nthw/core/include/NT400D13_U62_Si5332-GM2-RevD-1_V5-Registers.h
> @@ -0,0 +1,425 @@
> +/*
> + * Si5332-GM2 Rev D Configuration Register Export Header File
> + *
> + * This file represents a series of Skyworks Si5332-GM2 Rev D
> + * register writes that can be performed to load a single configuration
> + * on a device. It was created by a Skyworks ClockBuilder Pro
> + * export tool.
> + *
This file is missing a SPDX tag.
Please send a fix or we will have to revert this change.
The filename also looks strange, as it does not follow some kind of
implicit convention (when I compare to other files in this driver).
Could it be renamed?
--
David Marchand
next prev parent reply other threads:[~2025-03-05 17:03 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-20 22:03 [PATCH v1 00/32] add new adapter NT400D13 Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 01/32] net/ntnic: add link agx 100g Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 02/32] net/ntnic: add link state machine Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 03/32] net/ntnic: add rpf and gfg init Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 04/32] net/ntnic: add agx setup for port Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 05/32] net/ntnic: add host loopback init Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 06/32] net/ntnic: add line " Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 07/32] net/ntnic: add 100 gbps port init Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 08/32] net/ntnic: add port post init Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 09/32] net/ntnic: add nim low power API Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 10/32] net/ntnic: add link handling API Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 11/32] net/ntnic: add port init to the state machine Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 12/32] net/ntnic: add port disable API Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 13/32] net/ntnic: add minimal initialization new NIC NT400D13 Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 14/32] net/ntnic: add minimal reset FPGA Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 15/32] net/ntnic: add FPGA modules and registers Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 16/32] net/ntnic: add setup for fpga reset Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 17/32] net/ntnic: add default reset setting for NT400D13 Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 18/32] net/ntnic: add DDR calibration to reset stage Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 19/32] net/ntnic: add PHY ftile reset Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 20/32] net/ntnic: add clock init Serhii Iliushyk
2025-03-05 17:03 ` David Marchand [this message]
2025-02-20 22:03 ` [PATCH v1 21/32] net/ntnic: add nt400d13 pcm init Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 22/32] net/ntnic: add HIF clock test Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 23/32] net/ntnic: add nt400d13 PRM module init Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 24/32] net/ntnic: add nt400d13 PRM module reset Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 25/32] net/ntnic: add SPI v3 support for FPGA Serhii Iliushyk
2025-02-22 19:21 ` Stephen Hemminger
2025-02-20 22:03 ` [PATCH v1 26/32] net/ntnic: add i2cm init Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 27/32] net/ntnic: add pca init Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 28/32] net/ntnic: add pcal init Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 29/32] net/ntnic: add reset PHY init Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 30/32] net/ntnic: add igam module init Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 31/32] net/ntnic: init IGAM and config PLL for FPGA Serhii Iliushyk
2025-02-20 22:03 ` [PATCH v1 32/32] net/ntnic: revert untrusted loop bound Serhii Iliushyk
2025-02-20 22:31 ` Stephen Hemminger
2025-02-20 23:49 ` [PATCH v1 00/32] add new adapter NT400D13 Stephen Hemminger
2025-02-22 21:41 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAJFAV8xtMHZfXo3c8vw0LG9-Cg4v8LCKjP8+psm=sJ3XoFzyNw@mail.gmail.com' \
--to=david.marchand@redhat.com \
--cc=ckm@napatech.com \
--cc=dev@dpdk.org \
--cc=mko-plv@napatech.com \
--cc=sil-plv@napatech.com \
--cc=stephen@networkplumber.org \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).