From: David Marchand <david.marchand@redhat.com>
To: Olivier Matz <olivier.matz@6wind.com>
Cc: dev <dev@dpdk.org>, Thomas Monjalon <thomas@monjalon.net>,
Bruce Richardson <bruce.richardson@intel.com>,
Flavia <flavia.musatescu@intel.com>
Subject: Re: [dpdk-dev] [PATCH v3] devtools: better freebsd support
Date: Mon, 29 Jul 2019 10:31:31 +0200 [thread overview]
Message-ID: <CAJFAV8ydCLzvz=eqvC_XEUywuSvAZ0-tOcq94pTbT-Ryxw3ayg@mail.gmail.com> (raw)
In-Reply-To: <20190711142530.1891-1-olivier.matz@6wind.com>
On Thu, Jul 11, 2019 at 4:25 PM Olivier Matz <olivier.matz@6wind.com> wrote:
>
> - As "readlink -e" and "readlink -m" do not exist on freebsd,
> use "readlink -f", it should not have any impact in these cases.
> - "sed -ri" is invalid on freebsd and should be replaced by
> "sed -ri=''"
> - Use gmake instead of make.
>
> This fixes the following command:
> SYSDIR=/usr/src/sys ./devtools/test-build.sh \
> -j4 x86_64-native-freebsd-gcc
>
> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> ---
>
> v3:
> - fix examples installation path, pointed-out by Flavia
>
> v2:
> - remove sed_ri() function and use 'sed -ri=""' as suggested by Bruce
>
> devtools/check-dup-includes.sh | 2 +-
> devtools/checkpatches.sh | 8 ++--
> devtools/get-maintainer.sh | 2 +-
> devtools/load-devel-config | 4 +-
> devtools/test-build.sh | 94 ++++++++++++++++++++++--------------------
> devtools/validate-abi.sh | 2 +-
> 6 files changed, 58 insertions(+), 54 deletions(-)
>
> diff --git a/devtools/check-dup-includes.sh b/devtools/check-dup-includes.sh
> index e4c2748c6..591599949 100755
> --- a/devtools/check-dup-includes.sh
> +++ b/devtools/check-dup-includes.sh
> @@ -5,7 +5,7 @@
> # Check C files in git repository for duplicated includes.
> # Usage: devtools/check-dup-includes.sh [directory]
>
> -dir=${1:-$(dirname $(readlink -m $0))/..}
> +dir=${1:-$(dirname $(readlink -f $0))/..}
> cd $dir
>
> # speed up by ignoring Unicode details
> diff --git a/devtools/checkpatches.sh b/devtools/checkpatches.sh
> index 560e6ce93..8e2beee16 100755
> --- a/devtools/checkpatches.sh
> +++ b/devtools/checkpatches.sh
> @@ -7,9 +7,9 @@
> # - DPDK_CHECKPATCH_CODESPELL
> # - DPDK_CHECKPATCH_LINE_LENGTH
> # - DPDK_CHECKPATCH_OPTIONS
> -. $(dirname $(readlink -e $0))/load-devel-config
> +. $(dirname $(readlink -f $0))/load-devel-config
>
> -VALIDATE_NEW_API=$(dirname $(readlink -e $0))/check-symbol-change.sh
> +VALIDATE_NEW_API=$(dirname $(readlink -f $0))/check-symbol-change.sh
>
> # Enable codespell by default. This can be overwritten from a config file.
> # Codespell can also be enabled by setting DPDK_CHECKPATCH_CODESPELL to a valid path
> @@ -66,7 +66,7 @@ check_forbidden_additions() { # <patch>
> -v EXPRESSIONS="rte_panic\\\( rte_exit\\\(" \
> -v RET_ON_FAIL=1 \
> -v MESSAGE='Using rte_panic/rte_exit' \
> - -f $(dirname $(readlink -e $0))/check-forbidden-tokens.awk \
> + -f $(dirname $(readlink -f $0))/check-forbidden-tokens.awk \
> "$1" || res=1
>
> # svg figures must be included with wildcard extension
> @@ -75,7 +75,7 @@ check_forbidden_additions() { # <patch>
> -v EXPRESSIONS='::[[:space:]]*[^[:space:]]*\\.svg' \
> -v RET_ON_FAIL=1 \
> -v MESSAGE='Using explicit .svg extension instead of .*' \
> - -f $(dirname $(readlink -e $0))/check-forbidden-tokens.awk \
> + -f $(dirname $(readlink -f $0))/check-forbidden-tokens.awk \
> "$1" || res=1
>
> return $res
> diff --git a/devtools/get-maintainer.sh b/devtools/get-maintainer.sh
> index b9160486a..85740f5af 100755
> --- a/devtools/get-maintainer.sh
> +++ b/devtools/get-maintainer.sh
> @@ -5,7 +5,7 @@
>
> # Load config options:
> # - DPDK_GETMAINTAINER_PATH
> -. $(dirname $(readlink -e $0))/load-devel-config
> +. $(dirname $(readlink -f $0))/load-devel-config
>
> options="--no-git-fallback"
> options="$options --no-rolestats"
> diff --git a/devtools/load-devel-config b/devtools/load-devel-config
> index 4f43cb352..380c79db4 100644
> --- a/devtools/load-devel-config
> +++ b/devtools/load-devel-config
> @@ -6,7 +6,7 @@ test ! -r /etc/dpdk/devel.config ||
> test ! -r ~/.config/dpdk/devel.config ||
> . ~/.config/dpdk/devel.config
> # from local file
> -test ! -r $(dirname $(readlink -m $0))/../.develconfig ||
> - . $(dirname $(readlink -m $0))/../.develconfig
> +test ! -r $(dirname $(readlink -f $0))/../.develconfig ||
> + . $(dirname $(readlink -f $0))/../.develconfig
>
> # The config files must export variables in the shell style
> diff --git a/devtools/test-build.sh b/devtools/test-build.sh
> index 9b50bf73d..3c029ce31 100755
> --- a/devtools/test-build.sh
> +++ b/devtools/test-build.sh
> @@ -28,7 +28,7 @@ default_path=$PATH
> # - LIBSSO_SNOW3G_PATH
> # - LIBSSO_KASUMI_PATH
> # - LIBSSO_ZUC_PATH
> -. $(dirname $(readlink -e $0))/load-devel-config
> +. $(dirname $(readlink -f $0))/load-devel-config
>
> print_usage () {
> echo "usage: $(basename $0) [-h] [-jX] [-s] [config1 [config2] ...]]"
> @@ -57,6 +57,10 @@ print_help () {
> END_OF_HELP
> }
>
> +[ -z $MAKE ] && command -v gmake > /dev/null && MAKE=gmake
> +[ -z $MAKE ] && command -v make > /dev/null && MAKE=make
> +[ -z $MAKE ] && echo "Cannot find make or gmake" && exit 1
> +
> J=$DPDK_MAKE_JOBS
> short=false
> unset verbose
> @@ -90,7 +94,7 @@ trap "signal=INT ; trap - INT ; kill -INT $$" INT
> # notify result on exit
> trap on_exit EXIT
>
> -cd $(dirname $(readlink -m $0))/..
> +cd $(dirname $(readlink -f $0))/..
>
> reset_env ()
> {
> @@ -127,83 +131,83 @@ config () # <directory> <target> <options>
> fi
> if [ ! -e $1/.config ] || $reconfig ; then
> echo "================== Configure $1"
> - make T=$2 O=$1 config
> + ${MAKE} T=$2 O=$1 config
>
> echo 'Customize configuration'
> # Built-in options (lowercase)
> ! echo $3 | grep -q '+default' || \
> - sed -ri 's,(RTE_MACHINE=")native,\1default,' $1/.config
> + sed -ri="" 's,(RTE_MACHINE=")native,\1default,' $1/.config
> echo $3 | grep -q '+next' || \
> - sed -ri 's,(NEXT_ABI=)y,\1n,' $1/.config
> + sed -ri="" 's,(NEXT_ABI=)y,\1n,' $1/.config
> ! echo $3 | grep -q '+shared' || \
> - sed -ri 's,(SHARED_LIB=)n,\1y,' $1/.config
> + sed -ri="" 's,(SHARED_LIB=)n,\1y,' $1/.config
> ! echo $3 | grep -q '+debug' || ( \
> - sed -ri 's,(RTE_LOG_DP_LEVEL=).*,\1RTE_LOG_DEBUG,' $1/.config
> - sed -ri 's,(_DEBUG.*=)n,\1y,' $1/.config
> - sed -ri 's,(_STAT.*=)n,\1y,' $1/.config
> - sed -ri 's,(TEST_PMD_RECORD_.*=)n,\1y,' $1/.config )
> + sed -ri="" 's,(RTE_LOG_DP_LEVEL=).*,\1RTE_LOG_DEBUG,' $1/.config
> + sed -ri="" 's,(_DEBUG.*=)n,\1y,' $1/.config
> + sed -ri="" 's,(_STAT.*=)n,\1y,' $1/.config
> + sed -ri="" 's,(TEST_PMD_RECORD_.*=)n,\1y,' $1/.config )
>
> # Automatic configuration
> test "$DPDK_DEP_NUMA" != n || \
> - sed -ri 's,(NUMA.*=)y,\1n,' $1/.config
> - sed -ri 's,(LIBRTE_IEEE1588=)n,\1y,' $1/.config
> - sed -ri 's,(BYPASS=)n,\1y,' $1/.config
> + sed -ri="" 's,(NUMA.*=)y,\1n,' $1/.config
> + sed -ri="" 's,(LIBRTE_IEEE1588=)n,\1y,' $1/.config
> + sed -ri="" 's,(BYPASS=)n,\1y,' $1/.config
> test "$DPDK_DEP_ARCHIVE" != y || \
> - sed -ri 's,(RESOURCE_TAR=)n,\1y,' $1/.config
> + sed -ri="" 's,(RESOURCE_TAR=)n,\1y,' $1/.config
> test "$DPDK_DEP_ISAL" != y || \
> - sed -ri 's,(PMD_ISAL=)n,\1y,' $1/.config
> + sed -ri="" 's,(PMD_ISAL=)n,\1y,' $1/.config
> test "$DPDK_DEP_MLX" != y || \
> - sed -ri 's,(MLX._PMD=)n,\1y,' $1/.config
> + sed -ri="" 's,(MLX._PMD=)n,\1y,' $1/.config
> test "$DPDK_DEP_SZE" != y || \
> - sed -ri 's,(PMD_SZEDATA2=)n,\1y,' $1/.config
> + sed -ri="" 's,(PMD_SZEDATA2=)n,\1y,' $1/.config
> test "$DPDK_DEP_ZLIB" != y || \
> - sed -ri 's,(BNX2X_PMD=)n,\1y,' $1/.config
> + sed -ri="" 's,(BNX2X_PMD=)n,\1y,' $1/.config
> test "$DPDK_DEP_ZLIB" != y || \
> - sed -ri 's,(PMD_ZLIB=)n,\1y,' $1/.config
> + sed -ri="" 's,(PMD_ZLIB=)n,\1y,' $1/.config
> test "$DPDK_DEP_ZLIB" != y || \
> - sed -ri 's,(COMPRESSDEV_TEST=)n,\1y,' $1/.config
> + sed -ri="" 's,(COMPRESSDEV_TEST=)n,\1y,' $1/.config
> test "$DPDK_DEP_PCAP" != y || \
> - sed -ri 's,(PCAP=)n,\1y,' $1/.config
> + sed -ri="" 's,(PCAP=)n,\1y,' $1/.config
> test -z "$ARMV8_CRYPTO_LIB_PATH" || \
> - sed -ri 's,(PMD_ARMV8_CRYPTO=)n,\1y,' $1/.config
> + sed -ri="" 's,(PMD_ARMV8_CRYPTO=)n,\1y,' $1/.config
> test "$DPDK_DEP_IPSEC_MB" != y || \
> - sed -ri 's,(PMD_AESNI_MB=)n,\1y,' $1/.config
> + sed -ri="" 's,(PMD_AESNI_MB=)n,\1y,' $1/.config
> test "$DPDK_DEP_IPSEC_MB" != y || \
> - sed -ri 's,(PMD_AESNI_GCM=)n,\1y,' $1/.config
> + sed -ri="" 's,(PMD_AESNI_GCM=)n,\1y,' $1/.config
> test -z "$LIBSSO_SNOW3G_PATH" || \
> - sed -ri 's,(PMD_SNOW3G=)n,\1y,' $1/.config
> + sed -ri="" 's,(PMD_SNOW3G=)n,\1y,' $1/.config
> test -z "$LIBSSO_KASUMI_PATH" || \
> - sed -ri 's,(PMD_KASUMI=)n,\1y,' $1/.config
> + sed -ri="" 's,(PMD_KASUMI=)n,\1y,' $1/.config
> test -z "$LIBSSO_ZUC_PATH" || \
> - sed -ri 's,(PMD_ZUC=)n,\1y,' $1/.config
> + sed -ri="" 's,(PMD_ZUC=)n,\1y,' $1/.config
> test "$DPDK_DEP_SSL" != y || \
> - sed -ri 's,(PMD_CCP=)n,\1y,' $1/.config
> + sed -ri="" 's,(PMD_CCP=)n,\1y,' $1/.config
> test "$DPDK_DEP_SSL" != y || \
> - sed -ri 's,(PMD_OPENSSL=)n,\1y,' $1/.config
> + sed -ri="" 's,(PMD_OPENSSL=)n,\1y,' $1/.config
> test "$DPDK_DEP_SSL" != y || \
> - sed -ri 's,(QAT_SYM=)n,\1y,' $1/.config
> + sed -ri="" 's,(QAT_SYM=)n,\1y,' $1/.config
> test -z "$FLEXRAN_SDK" || \
> - sed -ri 's,(BBDEV_TURBO_SW=)n,\1y,' $1/.config
> - sed -ri 's,(SCHED_.*=)n,\1y,' $1/.config
> + sed -ri="" 's,(BBDEV_TURBO_SW=)n,\1y,' $1/.config
> + sed -ri="" 's,(SCHED_.*=)n,\1y,' $1/.config
> test -z "$LIBMUSDK_PATH" || \
> - sed -ri 's,(PMD_MVSAM_CRYPTO=)n,\1y,' $1/.config
> + sed -ri="" 's,(PMD_MVSAM_CRYPTO=)n,\1y,' $1/.config
> test -z "$LIBMUSDK_PATH" || \
> - sed -ri 's,(MVPP2_PMD=)n,\1y,' $1/.config
> + sed -ri="" 's,(MVPP2_PMD=)n,\1y,' $1/.config
> test -z "$LIBMUSDK_PATH" || \
> - sed -ri 's,(MVNETA_PMD=)n,\1y,' $1/.config
> + sed -ri="" 's,(MVNETA_PMD=)n,\1y,' $1/.config
> test "$DPDK_DEP_ELF" != y || \
> - sed -ri 's,(BPF_ELF=)n,\1y,' $1/.config
> + sed -ri="" 's,(BPF_ELF=)n,\1y,' $1/.config
> test "$DPDK_DEP_JSON" != y || \
> - sed -ri 's,(TELEMETRY=)n,\1y,' $1/.config
> + sed -ri="" 's,(TELEMETRY=)n,\1y,' $1/.config
> build_config_hook $1 $2 $3
>
> # Explicit enabler/disabler (uppercase)
> for option in $(echo $3 | sed 's,[~+], &,g') ; do
> pattern=$(echo $option | cut -c2-)
> if echo $option | grep -q '^~' ; then
> - sed -ri "s,($pattern=)y,\1n," $1/.config
> + sed -ri="" "s,($pattern=)y,\1n," $1/.config
> elif echo $option | grep -q '^+' ; then
> - sed -ri "s,($pattern=)n,\1y," $1/.config
> + sed -ri="" "s,($pattern=)n,\1y," $1/.config
> fi
> done
> fi
> @@ -220,22 +224,22 @@ for conf in $configs ; do
> # reload config with DPDK_TARGET set
> DPDK_TARGET=$target
> reset_env
> - . $(dirname $(readlink -e $0))/load-devel-config
> + . $(dirname $(readlink -f $0))/load-devel-config
>
> options=$(echo $conf | sed 's,[^~+]*,,')
> dir=$conf
> config $dir $target $options
>
> echo "================== Build $dir"
> - make -j$J EXTRA_CFLAGS="$maxerr $DPDK_DEP_CFLAGS" \
> + ${MAKE} -j$J EXTRA_CFLAGS="$maxerr $DPDK_DEP_CFLAGS" \
> EXTRA_LDFLAGS="$DPDK_DEP_LDFLAGS" $verbose O=$dir
> ! $short || break
> echo "================== Build examples for $dir"
> export RTE_SDK=$(pwd)
> export RTE_TARGET=$dir
> - make -j$J -sC examples \
> + ${MAKE} -j$J -sC examples \
> EXTRA_LDFLAGS="$DPDK_DEP_LDFLAGS" $verbose \
> - O=$(readlink -m $dir/examples)
> + O=$(readlink -f $dir)/examples
> unset RTE_TARGET
> echo "################## $dir done."
> unset dir
> @@ -244,9 +248,9 @@ done
> if ! $short ; then
> mkdir -p .check
> echo "================== Build doxygen HTML API"
> - make doc-api-html >/dev/null 2>.check/doc.txt
> + ${MAKE} doc-api-html >/dev/null 2>.check/doc.txt
> echo "================== Build sphinx HTML guides"
> - make doc-guides-html >/dev/null 2>>.check/doc.txt
> + ${MAKE} doc-guides-html >/dev/null 2>>.check/doc.txt
> echo "================== Check docs"
> diff -u /dev/null .check/doc.txt
> fi
> diff --git a/devtools/validate-abi.sh b/devtools/validate-abi.sh
> index 138436d93..f64e19d38 100755
> --- a/devtools/validate-abi.sh
> +++ b/devtools/validate-abi.sh
> @@ -181,7 +181,7 @@ case "${dst}" in
> /*) ;;
> *) dst=${PWD}/${dst} ;;
> esac
> -dpdkroot=$(readlink -e $(dirname $0)/..)
> +dpdkroot=$(readlink -f $(dirname $0)/..)
>
> if [ -e "${dst}" -a "$force" = 0 ]; then
> echo "The ${dst} directory is not empty. Remove it, use another"
> --
> 2.11.0
>
Reviewed-by: David Marchand <david.marchand@redhat.com>
--
David Marchand
next prev parent reply other threads:[~2019-07-29 8:31 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-23 7:43 [dpdk-dev] [PATCH] " Olivier Matz
2019-05-23 10:47 ` Bruce Richardson
2019-05-23 10:58 ` David Marchand
2019-07-05 13:58 ` [dpdk-dev] [PATCH v2] " Olivier Matz
2019-07-08 16:35 ` Thomas Monjalon
2019-07-11 13:06 ` Olivier Matz
2019-07-09 11:05 ` Musatescu, Flavia
2019-07-11 14:18 ` Olivier Matz
2019-07-11 14:25 ` [dpdk-dev] [PATCH v3] " Olivier Matz
2019-07-29 8:31 ` David Marchand [this message]
2019-07-29 8:36 ` David Marchand
2019-07-30 22:00 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAJFAV8ydCLzvz=eqvC_XEUywuSvAZ0-tOcq94pTbT-Ryxw3ayg@mail.gmail.com' \
--to=david.marchand@redhat.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=flavia.musatescu@intel.com \
--cc=olivier.matz@6wind.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).