From: David Marchand <david.marchand@redhat.com>
To: Ferruh Yigit <ferruh.yigit@intel.com>
Cc: Jiawen Wu <jiawenwu@trustnetic.com>, dev <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v4 00/58] net: txgbe PMD
Date: Tue, 27 Oct 2020 12:39:21 +0100 [thread overview]
Message-ID: <CAJFAV8yoOGfTa-aBpFHXP-GtSawoSjjK3qgjykBg91ngic47XA@mail.gmail.com> (raw)
In-Reply-To: <5a73b60c-5fd6-32c2-750c-2867b848ce7e@intel.com>
On Tue, Oct 27, 2020 at 12:36 PM Ferruh Yigit <ferruh.yigit@intel.com> wrote:
> I will fix it in the nex-net as following:
>
> diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
> index da5d85bcd0..3443617755 100644
> --- a/doc/guides/nics/index.rst
> +++ b/doc/guides/nics/index.rst
> @@ -57,6 +57,7 @@ Network Interface Controller Drivers
> szedata2
> tap
> thunderx
> + txgbe
> vdev_netvsc
> virtio
> vhost
>
LGTM.
Thanks Ferruh.
--
David Marchand
prev parent reply other threads:[~2020-10-27 11:39 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-19 8:53 Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 01/58] net/txgbe: add build and doc infrastructure Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 02/58] net/txgbe: add ethdev probe and remove Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 03/58] net/txgbe: add device init and uninit Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 04/58] net/txgbe: add error types and registers Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 05/58] net/txgbe: add MAC type and bus lan id Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 06/58] net/txgbe: add HW infrastructure and dummy function Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 07/58] net/txgbe: add EEPROM functions Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 08/58] net/txgbe: add HW init and reset operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 09/58] net/txgbe: add PHY init Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 10/58] net/txgbe: add module identify Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 11/58] net/txgbe: add PHY reset Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 12/58] net/txgbe: add info get operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 13/58] net/txgbe: add interrupt operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 14/58] net/txgbe: add device configure operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 15/58] net/txgbe: add link status change Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 16/58] net/txgbe: add multi-speed link setup Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 17/58] net/txgbe: add autoc read and write Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 18/58] net/txgbe: add MAC address operations Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 19/58] net/txgbe: add unicast hash bitmap Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 20/58] net/txgbe: add Rx and Tx init Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 21/58] net/txgbe: add Rx and Tx queues setup and release Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 22/58] net/txgbe: add Rx and Tx start and stop Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 23/58] net/txgbe: add packet type Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 24/58] net/txgbe: fill simple transmit function Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 25/58] net/txgbe: fill transmit function with hardware offload Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 26/58] net/txgbe: fill Tx prepare function Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 27/58] net/txgbe: fill receive functions Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 28/58] net/txgbe: add device start operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 29/58] net/txgbe: add Rx and Tx data path start and stop Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 30/58] net/txgbe: add device stop and close operations Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 31/58] net/txgbe: support Rx interrupt Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 32/58] net/txgbe: add Rx and Tx queue info get Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 33/58] net/txgbe: add device stats get Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 34/58] net/txgbe: add device xstats get Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 35/58] net/txgbe: add queue stats mapping Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 36/58] net/txgbe: add VLAN handle support Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 37/58] net/txgbe: add SWFW semaphore and lock Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 38/58] net/txgbe: add PF module init and uninit for SRIOV Jiawen Wu
2020-10-26 14:54 ` Ferruh Yigit
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 39/58] net/txgbe: add process mailbox operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 40/58] net/txgbe: add PF module configure for SRIOV Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 41/58] net/txgbe: add VMDq configure Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 42/58] net/txgbe: add RSS support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 43/58] net/txgbe: add DCB support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 44/58] net/txgbe: add flow control support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 45/58] net/txgbe: add FC auto negotiation support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 46/58] net/txgbe: add priority flow control support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 47/58] net/txgbe: add device promiscuous and allmulticast mode Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 48/58] net/txgbe: add MTU set operation Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 49/58] net/txgbe: add FW version get operation Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 50/58] net/txgbe: add EEPROM info " Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 51/58] net/txgbe: add register dump support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 52/58] net/txgbe: support device LED on and off Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 53/58] net/txgbe: add mirror rule operations Jiawen Wu
2020-10-26 14:54 ` Ferruh Yigit
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 54/58] net/txgbe: add PTP support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 55/58] net/txgbe: add DCB info get operation Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 56/58] net/txgbe: add Rx and Tx descriptor status Jiawen Wu
2020-10-26 14:54 ` Ferruh Yigit
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 57/58] net/txgbe: change stop operation callback to return int Jiawen Wu
2020-10-26 14:55 ` Ferruh Yigit
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 58/58] net/txgbe: introduce log type in the driver documentation Jiawen Wu
2020-10-26 14:55 ` Ferruh Yigit
2020-10-22 11:23 ` [dpdk-dev] [PATCH v4 00/58] net: txgbe PMD Jiawen Wu
2020-10-22 11:44 ` Ferruh Yigit
2020-10-26 14:55 ` Ferruh Yigit
2020-10-27 2:39 ` Jiawen Wu
2020-10-27 11:37 ` Ferruh Yigit
2020-11-03 23:08 ` Thomas Monjalon
2020-11-04 17:24 ` Ferruh Yigit
2020-11-05 1:55 ` Jiawen Wu
2020-11-05 8:55 ` Jiawen Wu
2020-11-05 9:28 ` Thomas Monjalon
2020-11-06 6:28 ` Honnappa Nagarahalli
2020-11-06 9:22 ` Jiawen Wu
2020-11-06 17:36 ` Honnappa Nagarahalli
2020-11-06 18:21 ` Honnappa Nagarahalli
2020-11-06 19:00 ` Thomas Monjalon
2020-11-06 19:56 ` Honnappa Nagarahalli
2020-11-07 9:55 ` Thomas Monjalon
2020-10-27 8:48 ` David Marchand
2020-10-27 11:36 ` Ferruh Yigit
2020-10-27 11:39 ` David Marchand [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAJFAV8yoOGfTa-aBpFHXP-GtSawoSjjK3qgjykBg91ngic47XA@mail.gmail.com \
--to=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=jiawenwu@trustnetic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).