From: John Miller <john.miller@atomicrules.com>
To: "Chautru, Nicolas" <nicolas.chautru@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
"ferruh.yigit@xilinx.com" <ferruh.yigit@xilinx.com>,
"ed.czeck@atomicrules.com" <ed.czeck@atomicrules.com>,
Shepard Siegel <shepard.siegel@atomicrules.com>
Subject: Re: [PATCH 05/10] baseband/ark: add ark baseband device
Date: Thu, 28 Apr 2022 06:01:35 -0400 [thread overview]
Message-ID: <CAL4cyUZYZJ7GCNg=fOgOp2roF24_37jrJNo2FB-wF7EnC_7LTA@mail.gmail.com> (raw)
In-Reply-To: <BY5PR11MB44512CB8EA03FCD103D10E46F8FA9@BY5PR11MB4451.namprd11.prod.outlook.com>
[-- Attachment #1: Type: text/plain, Size: 59042 bytes --]
Hi Nic,
Yes, i will split this into smaller patches and take care of the TODO's. I
will have a v1 patch set ready with these changes within a couple of days.
Given the 4/10 deadline for 22.07 it would seem that 22.11 is our target.
Thank you,
-John
On Wed, Apr 27, 2022 at 2:38 PM Chautru, Nicolas <nicolas.chautru@intel.com>
wrote:
> Hi John,
>
> Do you think this one can be split into a few incremental commits?
>
> There are a few TODOs, is that v1 ready for review? Also you are targeting
> 22.11 right?
>
> Thanks
> Nic
>
> > -----Original Message-----
> > From: John Miller <john.miller@atomicrules.com>
> > Sent: Thursday, April 21, 2022 8:19 AM
> > To: dev@dpdk.org
> > Cc: ferruh.yigit@xilinx.com; ed.czeck@atomicrules.com; John Miller
> > <john.miller@atomicrules.com>
> > Subject: [PATCH 05/10] baseband/ark: add ark baseband device
> >
> > Add new ark baseband device.
> >
> > Signed-off-by: John Miller <john.miller@atomicrules.com>
> > ---
> > drivers/baseband/ark/ark_bbdev.c | 1064 +++++++++++++++++++++++
> > drivers/baseband/ark/ark_bbdev_common.c | 125 +++
> > drivers/baseband/ark/ark_bbdev_common.h | 92 ++
> > drivers/baseband/ark/ark_bbdev_custom.c | 201 +++++
> > drivers/baseband/ark/ark_bbdev_custom.h | 30 +
> > drivers/baseband/ark/meson.build | 11 +
> > drivers/baseband/ark/version.map | 3 +
> > 7 files changed, 1526 insertions(+)
> > create mode 100644 drivers/baseband/ark/ark_bbdev.c create mode
> > 100644 drivers/baseband/ark/ark_bbdev_common.c
> > create mode 100644 drivers/baseband/ark/ark_bbdev_common.h
> > create mode 100644 drivers/baseband/ark/ark_bbdev_custom.c
> > create mode 100644 drivers/baseband/ark/ark_bbdev_custom.h
> > create mode 100644 drivers/baseband/ark/meson.build create mode
> > 100644 drivers/baseband/ark/version.map
> >
> > diff --git a/drivers/baseband/ark/ark_bbdev.c
> > b/drivers/baseband/ark/ark_bbdev.c
> > new file mode 100644
> > index 0000000000..b23bbd44d1
> > --- /dev/null
> > +++ b/drivers/baseband/ark/ark_bbdev.c
> > @@ -0,0 +1,1064 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2016-2021 Atomic Rules LLC */
> > +
> > +#include "ark_common.h"
> > +#include "ark_bbdev_common.h"
> > +#include "ark_bbdev_custom.h"
> > +#include "ark_ddm.h"
> > +#include "ark_mpu.h"
> > +#include "ark_rqp.h"
> > +#include "ark_udm.h"
> > +
> > +#include <rte_bbdev.h>
> > +#include <rte_bbdev_pmd.h>
> > +#include <rte_bus_pci.h>
> > +#include <rte_common.h>
> > +#include <rte_devargs.h>
> > +#include <rte_malloc.h>
> > +#include <rte_ring.h>
> > +
> > +#include <unistd.h>
> > +
> > +#define DRIVER_NAME baseband_ark
> > +
> > +RTE_LOG_REGISTER_DEFAULT(ark_bbdev_logtype, DEBUG);
> > +
> > +#define ARK_SYSCTRL_BASE 0x0
> > +#define ARK_PKTGEN_BASE 0x10000
> > +#define ARK_MPU_RX_BASE 0x20000
> > +#define ARK_UDM_BASE 0x30000
> > +#define ARK_MPU_TX_BASE 0x40000
> > +#define ARK_DDM_BASE 0x60000
> > +#define ARK_PKTDIR_BASE 0xa0000
> > +#define ARK_PKTCHKR_BASE 0x90000
> > +#define ARK_RCPACING_BASE 0xb0000
> > +#define ARK_MPU_QOFFSET 0x00100
> > +
> > +#define BB_ARK_TX_Q_FACTOR 4
> > +
> > +/* TODO move to UDM, verify configuration */ #define ARK_RX_META_SIZE
> > +32 #define ARK_RX_META_OFFSET (RTE_PKTMBUF_HEADROOM -
> > ARK_RX_META_SIZE)
> > +#define ARK_RX_MAX_NOCHAIN (RTE_MBUF_DEFAULT_DATAROOM)
> > +
> > +static_assert(sizeof(struct ark_rx_meta) == ARK_RX_META_SIZE,
> > +"Unexpected struct size ark_rx_meta"); static_assert(sizeof(union
> > +ark_tx_meta) == 8, "Unexpected struct size ark_tx_meta");
> > +
> > +static struct rte_pci_id pci_id_ark[] = {
> > + {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1015)},
> > + {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1016)},
> > + {.device_id = 0},
> > +};
> > +
> > +static const struct ark_dev_caps
> > +ark_device_caps[] = {
> > + SET_DEV_CAPS(0x1015, true),
> > + SET_DEV_CAPS(0x1016, true),
> > + {.device_id = 0,}
> > +};
> > +
> > +
> > +/* Forward declarations */
> > +static const struct rte_bbdev_ops ark_bbdev_pmd_ops;
> > +
> > +
> > +/* queue */
> > +struct ark_bbdev_queue {
> > + struct rte_ring *active_ops; /* Ring for processed packets */
> > +
> > + /* RX components */
> > + /* array of physical addresses of the mbuf data pointer */
> > + rte_iova_t *rx_paddress_q;
> > + struct ark_udm_t *udm;
> > + struct ark_mpu_t *rx_mpu;
> > +
> > + /* TX components */
> > + union ark_tx_meta *tx_meta_q;
> > + struct ark_mpu_t *tx_mpu;
> > + struct ark_ddm_t *ddm;
> > +
> > + /* */
> > + uint32_t tx_queue_mask;
> > + uint32_t rx_queue_mask;
> > +
> > + int32_t rx_seed_index; /* step 1 set with empty mbuf */
> > + int32_t rx_cons_index; /* step 3 consumed by driver */
> > +
> > + /* 3 indexes to the paired data rings. */
> > + int32_t tx_prod_index; /* where to put the next one */
> > + int32_t tx_free_index; /* local copy of tx_cons_index */
> > +
> > + /* separate cache line -- written by FPGA -- RX announce */
> > + RTE_MARKER cacheline1 __rte_cache_min_aligned;
> > + volatile int32_t rx_prod_index; /* step 2 filled by FPGA */
> > +
> > + /* Separate cache line -- written by FPGA -- RX completion */
> > + RTE_MARKER cacheline2 __rte_cache_min_aligned;
> > + volatile int32_t tx_cons_index; /* hw is done, can be freed */ }
> > +__rte_cache_aligned;
> > +
> > +static int
> > +ark_bb_hw_q_setup(struct rte_bbdev *bbdev, uint16_t q_id, uint16_t
> > +queue_size) {
> > + struct ark_bbdev_queue *q = bbdev->data-
> > >queues[q_id].queue_private;
> > +
> > + rte_iova_t queue_base;
> > + rte_iova_t phys_addr_q_base;
> > + rte_iova_t phys_addr_prod_index;
> > + rte_iova_t phys_addr_cons_index;
> > +
> > + uint32_t write_interval_ns = 500; /* TODO this seems big */
> > +
> > + if (ark_mpu_verify(q->rx_mpu, sizeof(rte_iova_t))) {
> > + ARK_BBDEV_LOG(ERR, "Illegal hw/sw configuration RX
> > queue");
> > + return -1;
> > + }
> > + ARK_BBDEV_LOG(DEBUG, "ark_bb_q setup %u:%u",
> > + bbdev->data->dev_id, q_id);
> > +
> > + /* RX MPU */
> > + phys_addr_q_base = rte_malloc_virt2iova(q->rx_paddress_q);
> > + /* Force TX mode on MPU to match bbdev behavior */
> > + ark_mpu_configure(q->rx_mpu, phys_addr_q_base, queue_size, 1);
> > + ark_mpu_reset_stats(q->rx_mpu);
> > + ark_mpu_start(q->rx_mpu);
> > +
> > + /* UDM */
> > + queue_base = rte_malloc_virt2iova(q);
> > + phys_addr_prod_index = queue_base +
> > + offsetof(struct ark_bbdev_queue, rx_prod_index);
> > + ark_udm_write_addr(q->udm, phys_addr_prod_index);
> > + ark_udm_queue_enable(q->udm, 1);
> > +
> > + /* TX MPU */
> > + phys_addr_q_base = rte_malloc_virt2iova(q->tx_meta_q);
> > + ark_mpu_configure(q->tx_mpu, phys_addr_q_base,
> > + BB_ARK_TX_Q_FACTOR * queue_size, 1);
> > + ark_mpu_start(q->tx_mpu);
> > +
> > + /* DDM */
> > + phys_addr_cons_index = queue_base +
> > + offsetof(struct ark_bbdev_queue, tx_cons_index);
> > + ark_ddm_setup(q->ddm, phys_addr_cons_index, write_interval_ns);
> > +
> > + return 0;
> > +}
> > +
> > +/* Setup a queue */
> > +static int
> > +ark_bb_q_setup(struct rte_bbdev *bbdev, uint16_t q_id,
> > + const struct rte_bbdev_queue_conf *queue_conf) {
> > + struct ark_bbdev_queue *q;
> > + struct ark_bbdevice *ark_bb = bbdev->data->dev_private;
> > +
> > + const uint32_t queue_size = queue_conf->queue_size;
> > + const int socket_id = queue_conf->socket;
> > + const uint64_t pg_sz = sysconf(_SC_PAGESIZE);
> > + char ring_name[RTE_RING_NAMESIZE];
> > +
> > + /* Configuration checks */
> > + if (!rte_is_power_of_2(queue_size)) {
> > + ARK_BBDEV_LOG(ERR,
> > + "Configuration queue size"
> > + " must be power of two %u",
> > + queue_size);
> > + return -EINVAL;
> > + }
> > +
> > + if (RTE_PKTMBUF_HEADROOM < ARK_RX_META_SIZE) {
> > + ARK_BBDEV_LOG(ERR,
> > + "Error: Ark bbdev requires head room > %d
> bytes
> > (%s)",
> > + ARK_RX_META_SIZE, __func__);
> > + return -EINVAL;
> > + }
> > +
> > + /* Allocate the queue data structure. */
> > + q = rte_zmalloc_socket(RTE_STR(DRIVER_NAME), sizeof(*q),
> > + RTE_CACHE_LINE_SIZE, queue_conf->socket);
> > + if (q == NULL) {
> > + ARK_BBDEV_LOG(ERR, "Failed to allocate queue memory");
> > + return -ENOMEM;
> > + }
> > + bbdev->data->queues[q_id].queue_private = q;
> > +
> > + /* RING */
> > + snprintf(ring_name, RTE_RING_NAMESIZE, RTE_STR(DRIVER_NAME)
> > "%u:%u",
> > + bbdev->data->dev_id, q_id);
> > + q->active_ops = rte_ring_create(ring_name,
> > + queue_size,
> > + queue_conf->socket,
> > + RING_F_SP_ENQ | RING_F_SC_DEQ);
> > + if (q->active_ops == NULL) {
> > + ARK_BBDEV_LOG(ERR, "Failed to create ring");
> > + goto free_all;
> > + }
> > +
> > + q->rx_queue_mask = queue_size - 1;
> > + q->tx_queue_mask = (BB_ARK_TX_Q_FACTOR * queue_size) - 1;
> > +
> > + /* Each mbuf requires 2 to 4 objects, factor by
> > BB_ARK_TX_Q_FACTOR */
> > + q->tx_meta_q =
> > + rte_zmalloc_socket("Ark_bb_txqueue meta",
> > + queue_size * BB_ARK_TX_Q_FACTOR *
> > + sizeof(union ark_tx_meta),
> > + pg_sz,
> > + socket_id);
> > +
> > + if (q->tx_meta_q == 0) {
> > + ARK_BBDEV_LOG(ERR, "Failed to allocate "
> > + "queue memory in %s", __func__);
> > + goto free_all;
> > + }
> > +
> > + q->ddm = RTE_PTR_ADD(ark_bb->ddm.v, q_id *
> > ARK_DDM_QOFFSET);
> > + q->tx_mpu = RTE_PTR_ADD(ark_bb->mputx.v, q_id *
> > ARK_MPU_QOFFSET);
> > +
> > + q->rx_paddress_q =
> > + rte_zmalloc_socket("ark_bb_rx_paddress_q",
> > + queue_size * sizeof(rte_iova_t),
> > + pg_sz,
> > + socket_id);
> > +
> > + if (q->rx_paddress_q == 0) {
> > + ARK_BBDEV_LOG(ERR,
> > + "Failed to allocate queue memory in %s",
> > + __func__);
> > + goto free_all;
> > + }
> > + q->udm = RTE_PTR_ADD(ark_bb->udm.v, q_id *
> > ARK_UDM_QOFFSET);
> > + q->rx_mpu = RTE_PTR_ADD(ark_bb->mpurx.v, q_id *
> > ARK_MPU_QOFFSET);
> > +
> > + /* Structure have been configured, set the hardware */
> > + return ark_bb_hw_q_setup(bbdev, q_id, queue_size);
> > +
> > +free_all:
> > + rte_free(q->tx_meta_q);
> > + rte_free(q->rx_paddress_q);
> > + rte_free(q);
> > + return -EFAULT;
> > +}
> > +
> > +/* Release queue */
> > +static int
> > +ark_bb_q_release(struct rte_bbdev *bbdev, uint16_t q_id) {
> > + struct ark_bbdev_queue *q = bbdev->data-
> > >queues[q_id].queue_private;
> > +
> > + /* TODO Wait for ddm to send out all packets in flight,
> > + * Is this only called after q stop?
> > + */
> > +
> > + ark_mpu_dump(q->rx_mpu, "rx_MPU release", q_id);
> > + ark_mpu_dump(q->tx_mpu, "tx_MPU release", q_id);
> > +
> > + rte_ring_free(q->active_ops);
> > + rte_free(q->tx_meta_q);
> > + rte_free(q->rx_paddress_q);
> > + rte_free(q);
> > + bbdev->data->queues[q_id].queue_private = NULL;
> > +
> > + ARK_BBDEV_LOG(DEBUG, "released device queue %u:%u",
> > + bbdev->data->dev_id, q_id);
> > + return 0;
> > +}
> > +
> > +static int
> > +ark_bbdev_start(struct rte_bbdev *bbdev) {
> > + struct ark_bbdevice *ark_bb = bbdev->data->dev_private;
> > +
> > + ARK_BBDEV_LOG(DEBUG, "Starting device %u", bbdev->data-
> > >dev_id);
> > + if (ark_bb->started)
> > + return 0;
> > +
> > + /* start UDM */
> > + ark_udm_start(ark_bb->udm.v);
> > +
> > + /* start DDM */
> > + ark_ddm_start(ark_bb->ddm.v);
> > +
> > + ark_bb->started = 1;
> > +
> > + if (ark_bb->start_pg)
> > + ark_pktchkr_run(ark_bb->pc);
> > +
> > + if (ark_bb->start_pg) {
> > + pthread_t thread;
> > +
> > + /* Delay packet generator start allow the hardware to be
> > ready
> > + * This is only used for sanity checking with internal
> generator
> > + */
> > + if (pthread_create(&thread, NULL,
> > + ark_pktgen_delay_start, ark_bb->pg)) {
> > + ARK_BBDEV_LOG(ERR, "Could not create pktgen "
> > + "starter thread");
> > + return -1;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void
> > +ark_bbdev_stop(struct rte_bbdev *bbdev) {
> > + struct ark_bbdevice *ark_bb = bbdev->data->dev_private;
> > + struct ark_mpu_t *mpu;
> > + unsigned int i;
> > + int status;
> > +
> > + ARK_BBDEV_LOG(DEBUG, "Stopping device %u", bbdev->data-
> > >dev_id);
> > +
> > + if (!ark_bb->started)
> > + return;
> > +
> > + /* Stop the packet generator */
> > + if (ark_bb->start_pg)
> > + ark_pktgen_pause(ark_bb->pg);
> > +
> > + /* Stop DDM */
> > + /* Wait up to 0.1 second. each stop is up to 1000 * 10 useconds */
> > + for (i = 0; i < 10; i++) {
> > + status = ark_ddm_stop(ark_bb->ddm.v, 1);
> > + if (status == 0)
> > + break;
> > + }
> > + if (status || i != 0) {
> > + ARK_BBDEV_LOG(ERR, "DDM stop anomaly. status:"
> > + " %d iter: %u. (%s)",
> > + status,
> > + i,
> > + __func__);
> > + ark_ddm_dump(ark_bb->ddm.v, "Stop anomaly");
> > +
> > + mpu = ark_bb->mputx.v;
> > + for (i = 0; i < ark_bb->max_nb_queues; i++) {
> > + ark_mpu_dump(mpu, "DDM failure dump", i);
> > + mpu = RTE_PTR_ADD(mpu, ARK_MPU_QOFFSET);
> > + }
> > + }
> > + ark_ddm_dump_stats(ark_bb->ddm.v, "bbdev stop");
> > +
> > + /* STOP RX Side */
> > + /* Stop UDM multiple tries attempted */
> > + for (i = 0; i < 10; i++) {
> > + status = ark_udm_stop(ark_bb->udm.v, 1);
> > + if (status == 0)
> > + break;
> > + }
> > + if (status || i != 0) {
> > + ARK_BBDEV_LOG(WARNING, "UDM stop anomaly. status %d
> > iter: %u. (%s)",
> > + status, i, __func__);
> > + ark_udm_dump(ark_bb->udm.v, "Stop anomaly");
> > +
> > + mpu = ark_bb->mpurx.v;
> > + for (i = 0; i < ark_bb->max_nb_queues; i++) {
> > + ark_mpu_dump(mpu, "UDM Stop anomaly", i);
> > + mpu = RTE_PTR_ADD(mpu, ARK_MPU_QOFFSET);
> > + }
> > + }
> > +
> > + ark_udm_dump_stats(ark_bb->udm.v, "Post stop");
> > + ark_udm_dump_perf(ark_bb->udm.v, "Post stop");
> > +
> > + /* Stop the packet checker if it is running */
> > + if (ark_bb->start_pg) {
> > + ark_pktchkr_dump_stats(ark_bb->pc);
> > + ark_pktchkr_stop(ark_bb->pc);
> > + }
> > +}
> > +
> > +static int
> > +ark_bb_q_start(struct rte_bbdev *bbdev, uint16_t q_id) {
> > + struct ark_bbdev_queue *q = bbdev->data-
> > >queues[q_id].queue_private;
> > + ARK_BBDEV_LOG(DEBUG, "ark_bb_q start %u:%u", bbdev->data-
> > >dev_id, q_id);
> > + ark_mpu_start(q->tx_mpu);
> > + ark_mpu_start(q->rx_mpu);
> > + return 0;
> > +}
> > +static int
> > +ark_bb_q_stop(struct rte_bbdev *bbdev, uint16_t q_id) {
> > + struct ark_bbdev_queue *q = bbdev->data-
> > >queues[q_id].queue_private;
> > + ARK_BBDEV_LOG(DEBUG, "ark_bb_q stop %u:%u", bbdev->data-
> > >dev_id, q_id);
> > + ark_mpu_stop(q->tx_mpu);
> > + ark_mpu_stop(q->rx_mpu);
> > + return 0;
> > +}
> > +
> > +/*
> > +****************************************************************
> > *******
> > +** */
> > +/* Common function for all enqueue and dequeue ops */ static inline
> > +void ark_bb_enqueue_desc_fill(struct ark_bbdev_queue *q,
> > + struct rte_mbuf *mbuf,
> > + uint16_t offset, /* Extra offset */
> > + uint8_t flags,
> > + uint32_t *meta,
> > + uint8_t meta_cnt /* 0, 1 or 2 */
> > + )
> > +{
> > + union ark_tx_meta *tx_meta;
> > + int32_t tx_idx;
> > + uint8_t m;
> > +
> > + /* Header */
> > + tx_idx = q->tx_prod_index & q->tx_queue_mask;
> > + tx_meta = &q->tx_meta_q[tx_idx];
> > + tx_meta->data_len = rte_pktmbuf_data_len(mbuf) - offset;
> > + tx_meta->flags = flags;
> > + tx_meta->meta_cnt = meta_cnt;
> > + tx_meta->user1 = *meta++;
> > + q->tx_prod_index++;
> > +
> > + for (m = 0; m < meta_cnt; m++) {
> > + tx_idx = q->tx_prod_index & q->tx_queue_mask;
> > + tx_meta = &q->tx_meta_q[tx_idx];
> > + tx_meta->usermeta0 = *meta++;
> > + tx_meta->usermeta1 = *meta++;
> > + q->tx_prod_index++;
> > + }
> > +
> > + tx_idx = q->tx_prod_index & q->tx_queue_mask;
> > + tx_meta = &q->tx_meta_q[tx_idx];
> > + tx_meta->physaddr = rte_mbuf_data_iova(mbuf) + offset;
> > + q->tx_prod_index++;
> > +}
> > +
> > +static inline void
> > +ark_bb_enqueue_segmented_pkt(struct ark_bbdev_queue *q,
> > + struct rte_mbuf *mbuf,
> > + uint16_t offset,
> > + uint32_t *meta, uint8_t meta_cnt) {
> > + struct rte_mbuf *next;
> > + uint8_t flags = ARK_DDM_SOP;
> > +
> > + while (mbuf != NULL) {
> > + next = mbuf->next;
> > + flags |= (next == NULL) ? ARK_DDM_EOP : 0;
> > +
> > + ark_bb_enqueue_desc_fill(q, mbuf, offset, flags,
> > + meta, meta_cnt);
> > +
> > + flags &= ~ARK_DDM_SOP; /* drop SOP flags */
> > + meta_cnt = 0;
> > + offset = 0;
> > +
> > + mbuf = next;
> > + }
> > +}
> > +
> > +static inline int
> > +ark_bb_enqueue_common(struct ark_bbdev_queue *q,
> > + struct rte_mbuf *m_in, struct rte_mbuf *m_out,
> > + uint16_t offset,
> > + uint32_t *meta, uint8_t meta_cnt) {
> > + int32_t free_queue_space;
> > + int32_t rx_idx;
> > +
> > + /* TX side limit */
> > + free_queue_space = q->tx_queue_mask -
> > + (q->tx_prod_index - q->tx_free_index);
> > + if (unlikely(free_queue_space < (2 + (2 * m_in->nb_segs))))
> > + return 1;
> > +
> > + /* RX side limit */
> > + free_queue_space = q->rx_queue_mask -
> > + (q->rx_seed_index - q->rx_cons_index);
> > + if (unlikely(free_queue_space < m_out->nb_segs))
> > + return 1;
> > +
> > + if (unlikely(m_in->nb_segs > 1))
> > + ark_bb_enqueue_segmented_pkt(q, m_in, offset, meta,
> > meta_cnt);
> > + else
> > + ark_bb_enqueue_desc_fill(q, m_in, offset,
> > + ARK_DDM_SOP | ARK_DDM_EOP,
> > + meta, meta_cnt);
> > +
> > + /* We assume that the return mubf has exactly enough segments for
> > + * return data, which is 2048 bytes per segment.
> > + */
> > + do {
> > + rx_idx = q->rx_seed_index & q->rx_queue_mask;
> > + q->rx_paddress_q[rx_idx] = m_out->buf_iova;
> > + q->rx_seed_index++;
> > + m_out = m_out->next;
> > + } while (m_out);
> > +
> > + return 0;
> > +}
> > +
> > +static inline void
> > +ark_bb_enqueue_finalize(struct rte_bbdev_queue_data *q_data,
> > + struct ark_bbdev_queue *q,
> > + void **ops,
> > + uint16_t nb_ops, uint16_t nb)
> > +{
> > + /* BBDEV global stats */
> > + /* These are not really errors, not sure why bbdev counts these. */
> > + q_data->queue_stats.enqueue_err_count += nb_ops - nb;
> > + q_data->queue_stats.enqueued_count += nb;
> > +
> > + /* Notify HW that */
> > + if (unlikely(nb == 0))
> > + return;
> > +
> > + ark_mpu_set_producer(q->tx_mpu, q->tx_prod_index);
> > + ark_mpu_set_producer(q->rx_mpu, q->rx_seed_index);
> > +
> > + /* Queue info for dequeue-side processing */
> > + rte_ring_enqueue_burst(q->active_ops,
> > + (void **)ops, nb, NULL);
> > +}
> > +
> > +static int
> > +ark_bb_dequeue_segmented(struct rte_mbuf *mbuf0,
> > + int32_t *prx_cons_index,
> > + uint16_t pkt_len
> > + )
> > +{
> > + struct rte_mbuf *mbuf;
> > + uint16_t data_len;
> > + uint16_t remaining;
> > + uint16_t segments = 1;
> > +
> > + data_len = RTE_MIN(pkt_len, RTE_MBUF_DEFAULT_DATAROOM);
> > + remaining = pkt_len - data_len;
> > +
> > + mbuf = mbuf0;
> > + mbuf0->data_len = data_len;
> > + while (remaining) {
> > + segments += 1;
> > + mbuf = mbuf->next;
> > + if (unlikely(mbuf == 0)) {
> > + ARK_BBDEV_LOG(CRIT, "Expected chained mbuf with
> > "
> > + "at least %d segments for dequeue "
> > + "of packet length %d",
> > + segments, pkt_len);
> > + return 1;
> > + }
> > +
> > + data_len = RTE_MIN(remaining,
> > + RTE_MBUF_DEFAULT_DATAROOM);
> > + remaining -= data_len;
> > +
> > + mbuf->data_len = data_len;
> > + *prx_cons_index += 1;
> > + }
> > +
> > + if (mbuf->next != 0) {
> > + ARK_BBDEV_LOG(CRIT, "Expected chained mbuf with "
> > + "at exactly %d segments for dequeue "
> > + "of packet length %d. Found %d "
> > + "segments",
> > + segments, pkt_len, mbuf0->nb_segs);
> > + return 1;
> > + }
> > + return 0;
> > +}
> > +
> > +/*
> > +****************************************************************
> > *******
> > +** */
> > +/* LDPC Decode ops */
> > +static int16_t
> > +ark_bb_enqueue_ldpc_dec_one_op(struct ark_bbdev_queue *q,
> > + struct rte_bbdev_dec_op *this_op) {
> > + struct rte_bbdev_op_ldpc_dec *ldpc_dec_op = &this_op->ldpc_dec;
> > + struct rte_mbuf *m_in = ldpc_dec_op->input.data;
> > + struct rte_mbuf *m_out = ldpc_dec_op->hard_output.data;
> > + uint16_t offset = ldpc_dec_op->input.offset;
> > + uint32_t meta[5] = {0};
> > + uint8_t meta_cnt = 0;
> > +
> > + /* User's meta move from bbdev op to Arkville HW */
> > + if (ark_bb_user_enqueue_ldpc_dec(this_op, meta, &meta_cnt)) {
> > + ARK_BBDEV_LOG(ERR, "%s failed", __func__);
> > + return 1;
> > + }
> > +
> > + return ark_bb_enqueue_common(q, m_in, m_out, offset, meta,
> > meta_cnt);
> > +}
> > +
> > +/* Enqueue LDPC Decode -- burst */
> > +static uint16_t
> > +ark_bb_enqueue_ldpc_dec_ops(struct rte_bbdev_queue_data *q_data,
> > + struct rte_bbdev_dec_op **ops, uint16_t
> nb_ops) {
> > + struct ark_bbdev_queue *q = q_data->queue_private;
> > + unsigned int max_enq;
> > + uint16_t nb;
> > +
> > + max_enq = rte_ring_free_count(q->active_ops);
> > + max_enq = RTE_MIN(max_enq, nb_ops);
> > + for (nb = 0; nb < max_enq; nb++) {
> > + if (ark_bb_enqueue_ldpc_dec_one_op(q, ops[nb]))
> > + break;
> > + }
> > +
> > + ark_bb_enqueue_finalize(q_data, q, (void **)ops, nb_ops, nb);
> > + return nb;
> > +}
> > +
> > +/*
> > +****************************************************************
> > *******
> > +** */
> > +/* Dequeue LDPC Decode -- burst */
> > +static uint16_t
> > +ark_bb_dequeue_ldpc_dec_ops(struct rte_bbdev_queue_data *q_data,
> > + struct rte_bbdev_dec_op **ops, uint16_t
> nb_ops) {
> > + struct ark_bbdev_queue *q = q_data->queue_private;
> > + struct rte_mbuf *mbuf;
> > + struct rte_bbdev_dec_op *this_op;
> > + struct ark_rx_meta *meta;
> > + uint32_t *usermeta;
> > +
> > + uint16_t nb = 0;
> > + int32_t prod_index = q->rx_prod_index;
> > + int32_t cons_index = q->rx_cons_index;
> > +
> > + q->tx_free_index = q->tx_cons_index;
> > +
> > + while ((prod_index - cons_index) > 0) {
> > + if (rte_ring_dequeue(q->active_ops, (void **)&this_op)) {
> > + ARK_BBDEV_LOG(ERR, "%s data ready but no op!",
> > + __func__);
> > + q_data->queue_stats.dequeue_err_count += 1;
> > + break;
> > + }
> > + ops[nb] = this_op;
> > +
> > + mbuf = this_op->ldpc_dec.hard_output.data;
> > +
> > + /* META DATA embedded in headroom */
> > + meta = RTE_PTR_ADD(mbuf->buf_addr,
> > ARK_RX_META_OFFSET);
> > +
> > + mbuf->pkt_len = meta->pkt_len;
> > + mbuf->data_len = meta->pkt_len;
> > +
> > + if (unlikely(meta->pkt_len > ARK_RX_MAX_NOCHAIN)) {
> > + if (ark_bb_dequeue_segmented(mbuf, &cons_index,
> > + meta->pkt_len))
> > + q_data->queue_stats.dequeue_err_count +=
> > 1;
> > + } else if (mbuf->next != 0) {
> > + ARK_BBDEV_LOG(CRIT, "Expected mbuf with "
> > + "at exactly 1 segments for dequeue "
> > + "of packet length %d. Found %d "
> > + "segments",
> > + meta->pkt_len, mbuf->nb_segs);
> > + q_data->queue_stats.dequeue_err_count += 1;
> > + }
> > +
> > + usermeta = meta->user_meta;
> > + /* User's meta move from Arkville HW to bbdev OP */
> > + ark_bb_user_dequeue_ldpc_dec(this_op, usermeta);
> > + nb++;
> > + cons_index++;
> > + if (nb >= nb_ops)
> > + break;
> > + }
> > +
> > + q->rx_cons_index = cons_index;
> > +
> > + /* BBdev stats */
> > + q_data->queue_stats.dequeued_count += nb;
> > +
> > + return nb;
> > +}
> > +
> > +/***************************************************************
> > *******
> > +****/
> > +/* Enqueue LDPC Encode */
> > +static int16_t
> > +ark_bb_enqueue_ldpc_enc_one_op(struct ark_bbdev_queue *q,
> > + struct rte_bbdev_enc_op *this_op) {
> > + struct rte_bbdev_op_ldpc_enc *ldpc_enc_op = &this_op->ldpc_enc;
> > + struct rte_mbuf *m_in = ldpc_enc_op->input.data;
> > + struct rte_mbuf *m_out = ldpc_enc_op->output.data;
> > + uint16_t offset = ldpc_enc_op->input.offset;
> > + uint32_t meta[5] = {0};
> > + uint8_t meta_cnt = 0;
> > +
> > + /* User's meta move from bbdev op to Arkville HW */
> > + if (ark_bb_user_enqueue_ldpc_enc(this_op, meta, &meta_cnt)) {
> > + ARK_BBDEV_LOG(ERR, "%s failed", __func__);
> > + return 1;
> > + }
> > +
> > + return ark_bb_enqueue_common(q, m_in, m_out, offset, meta,
> > meta_cnt);
> > +}
> > +
> > +/* Enqueue LDPC Encode -- burst */
> > +static uint16_t
> > +ark_bb_enqueue_ldpc_enc_ops(struct rte_bbdev_queue_data *q_data,
> > + struct rte_bbdev_enc_op **ops, uint16_t
> nb_ops) {
> > + struct ark_bbdev_queue *q = q_data->queue_private;
> > + unsigned int max_enq;
> > + uint16_t nb;
> > +
> > + max_enq = rte_ring_free_count(q->active_ops);
> > + max_enq = RTE_MIN(max_enq, nb_ops);
> > + for (nb = 0; nb < max_enq; nb++) {
> > + if (ark_bb_enqueue_ldpc_enc_one_op(q, ops[nb]))
> > + break;
> > + }
> > +
> > + ark_bb_enqueue_finalize(q_data, q, (void **)ops, nb_ops, nb);
> > + return nb;
> > +}
> > +
> > +/* Dequeue LDPC Encode -- burst */
> > +static uint16_t
> > +ark_bb_dequeue_ldpc_enc_ops(struct rte_bbdev_queue_data *q_data,
> > + struct rte_bbdev_enc_op **ops, uint16_t
> nb_ops) {
> > + struct ark_bbdev_queue *q = q_data->queue_private;
> > + struct rte_mbuf *mbuf;
> > + struct rte_bbdev_enc_op *this_op;
> > + struct ark_rx_meta *meta;
> > + uint32_t *usermeta;
> > +
> > + uint16_t nb = 0;
> > + int32_t prod_index = q->rx_prod_index;
> > + int32_t cons_index = q->rx_cons_index;
> > +
> > + q->tx_free_index = q->tx_cons_index;
> > +
> > + while ((prod_index - cons_index) > 0) {
> > + if (rte_ring_dequeue(q->active_ops, (void **)&this_op)) {
> > + ARK_BBDEV_LOG(ERR, "%s data ready but no op!",
> > + __func__);
> > + q_data->queue_stats.dequeue_err_count += 1;
> > + break;
> > + }
> > + ops[nb] = this_op;
> > +
> > + mbuf = this_op->ldpc_enc.output.data;
> > +
> > + /* META DATA embedded in headroom */
> > + meta = RTE_PTR_ADD(mbuf->buf_addr,
> > ARK_RX_META_OFFSET);
> > +
> > + mbuf->pkt_len = meta->pkt_len;
> > + mbuf->data_len = meta->pkt_len;
> > + usermeta = meta->user_meta;
> > +
> > + if (unlikely(meta->pkt_len > ARK_RX_MAX_NOCHAIN)) {
> > + if (ark_bb_dequeue_segmented(mbuf, &cons_index,
> > + meta->pkt_len))
> > + q_data->queue_stats.dequeue_err_count +=
> > 1;
> > + } else if (mbuf->next != 0) {
> > + ARK_BBDEV_LOG(CRIT, "Expected mbuf with "
> > + "at exactly 1 segments for dequeue "
> > + "of packet length %d. Found %d "
> > + "segments",
> > + meta->pkt_len, mbuf->nb_segs);
> > + q_data->queue_stats.dequeue_err_count += 1;
> > + }
> > +
> > + /* User's meta move from Arkville HW to bbdev OP */
> > + ark_bb_user_dequeue_ldpc_enc(this_op, usermeta);
> > + nb++;
> > + cons_index++;
> > + if (nb >= nb_ops)
> > + break;
> > + }
> > +
> > + q->rx_cons_index = cons_index;
> > +
> > + /* BBdev stats */
> > + q_data->queue_stats.dequeued_count += nb;
> > +
> > + return nb;
> > +}
> > +
> > +/***************************************************************
> > *******
> > +****/
> > +/*
> > + *Initial device hardware configuration when device is opened
> > + * setup the DDM, and UDM; called once per PCIE device */ static int
> > +ark_bb_config_device(struct ark_bbdevice *ark_bb) {
> > + uint16_t num_q, i;
> > + struct ark_mpu_t *mpu;
> > +
> > + /*
> > + * Make sure that the packet director, generator and checker are
> in a
> > + * known state
> > + */
> > + ark_bb->start_pg = 0;
> > + ark_bb->pg = ark_pktgen_init(ark_bb->pktgen.v, 0, 1);
> > + if (ark_bb->pg == NULL)
> > + return -1;
> > + ark_pktgen_reset(ark_bb->pg);
> > + ark_bb->pc = ark_pktchkr_init(ark_bb->pktchkr.v, 0, 1);
> > + if (ark_bb->pc == NULL)
> > + return -1;
> > + ark_pktchkr_stop(ark_bb->pc);
> > + ark_bb->pd = ark_pktdir_init(ark_bb->pktdir.v);
> > + if (ark_bb->pd == NULL)
> > + return -1;
> > +
> > + /* Verify HW */
> > + if (ark_udm_verify(ark_bb->udm.v))
> > + return -1;
> > + if (ark_ddm_verify(ark_bb->ddm.v))
> > + return -1;
> > +
> > + /* UDM */
> > + if (ark_udm_reset(ark_bb->udm.v)) {
> > + ARK_BBDEV_LOG(ERR, "Unable to stop and reset UDM");
> > + return -1;
> > + }
> > + /* Keep in reset until the MPU are cleared */
> > +
> > + /* MPU reset */
> > + mpu = ark_bb->mpurx.v;
> > + num_q = ark_api_num_queues(mpu);
> > + ark_bb->max_nb_queues = num_q;
> > +
> > + for (i = 0; i < num_q; i++) {
> > + ark_mpu_reset(mpu);
> > + mpu = RTE_PTR_ADD(mpu, ARK_MPU_QOFFSET);
> > + }
> > +
> > + /* Only 1 queue supported in the udm */
> > + ark_udm_stop(ark_bb->udm.v, 0);
> > + ark_udm_configure(ark_bb->udm.v,
> > + RTE_PKTMBUF_HEADROOM,
> > + bbdev->data->queues[q_id]->dataroom,
> > + ARK_RX_WRITE_TIME_NS);
> > +
> > +
> > + ark_udm_stats_reset(ark_bb->udm.v);
> > + ark_udm_stop(ark_bb->udm.v, 0);
> > +
> > + /* TX -- DDM */
> > + if (ark_ddm_stop(ark_bb->ddm.v, 1))
> > + ARK_BBDEV_LOG(ERR, "Unable to stop DDM");
> > +
> > + mpu = ark_bb->mputx.v;
> > + num_q = ark_api_num_queues(mpu);
> > + for (i = 0; i < num_q; i++) {
> > + ark_mpu_reset(mpu);
> > + mpu = RTE_PTR_ADD(mpu, ARK_MPU_QOFFSET);
> > + }
> > +
> > + ark_ddm_reset(ark_bb->ddm.v);
> > + ark_ddm_stats_reset(ark_bb->ddm.v);
> > +
> > + ark_ddm_stop(ark_bb->ddm.v, 0);
> > + if (ark_bb->rqpacing)
> > + ark_rqp_stats_reset(ark_bb->rqpacing);
> > +
> > + ARK_BBDEV_LOG(INFO, "packet director set to 0x%x", ark_bb-
> > >pkt_dir_v);
> > + ark_pktdir_setup(ark_bb->pd, ark_bb->pkt_dir_v);
> > +
> > + if (ark_bb->pkt_gen_args[0]) {
> > + ARK_BBDEV_LOG(INFO, "Setting up the packet generator");
> > + ark_pktgen_parse(ark_bb->pkt_gen_args);
> > + ark_pktgen_reset(ark_bb->pg);
> > + ark_pktgen_setup(ark_bb->pg);
> > + ark_bb->start_pg = 1;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +ark_bbdev_init(struct rte_bbdev *bbdev, struct rte_pci_driver *pci_drv)
> > +{
> > + struct ark_bbdevice *ark_bb = bbdev->data->dev_private;
> > + struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(bbdev->device);
> > + bool rqpacing = false;
> > + int p;
> > +
> > + RTE_SET_USED(pci_drv);
> > +
> > + ark_bb->bar0 = (uint8_t *)pci_dev->mem_resource[0].addr;
> > + ark_bb->a_bar = (uint8_t *)pci_dev->mem_resource[2].addr;
> > +
> > + ark_bb->sysctrl.v = (void *)&ark_bb->bar0[ARK_SYSCTRL_BASE];
> > + ark_bb->mpurx.v = (void *)&ark_bb->bar0[ARK_MPU_RX_BASE];
> > + ark_bb->udm.v = (void *)&ark_bb->bar0[ARK_UDM_BASE];
> > + ark_bb->mputx.v = (void *)&ark_bb->bar0[ARK_MPU_TX_BASE];
> > + ark_bb->ddm.v = (void *)&ark_bb->bar0[ARK_DDM_BASE];
> > + ark_bb->pktdir.v = (void *)&ark_bb->bar0[ARK_PKTDIR_BASE];
> > + ark_bb->pktgen.v = (void *)&ark_bb->bar0[ARK_PKTGEN_BASE];
> > + ark_bb->pktchkr.v = (void *)&ark_bb->bar0[ARK_PKTCHKR_BASE];
> > +
> > + p = 0;
> > + while (ark_device_caps[p].device_id != 0) {
> > + if (pci_dev->id.device_id == ark_device_caps[p].device_id)
> {
> > + rqpacing = ark_device_caps[p].caps.rqpacing;
> > + break;
> > + }
> > + p++;
> > + }
> > +
> > + if (rqpacing)
> > + ark_bb->rqpacing =
> > + (struct ark_rqpace_t *)(ark_bb->bar0 +
> > ARK_RCPACING_BASE);
> > + else
> > + ark_bb->rqpacing = NULL;
> > +
> > + ark_bb->started = 0;
> > +
> > + ARK_BBDEV_LOG(INFO, "Sys Ctrl Const = 0x%x HW Commit_ID:
> > %08x",
> > + ark_bb->sysctrl.t32[4],
> > + rte_be_to_cpu_32(ark_bb->sysctrl.t32[0x20 / 4]));
> > + ARK_BBDEV_LOG(INFO, "Arkville HW Commit_ID: %08x",
> > + rte_be_to_cpu_32(ark_bb->sysctrl.t32[0x20 / 4]));
> > +
> > + /* If HW sanity test fails, return an error */
> > + if (ark_bb->sysctrl.t32[4] != 0xcafef00d) {
> > + ARK_BBDEV_LOG(ERR,
> > + "HW Sanity test has failed, expected
> constant"
> > + " 0x%x, read 0x%x (%s)",
> > + 0xcafef00d,
> > + ark_bb->sysctrl.t32[4], __func__);
> > + return -1;
> > + }
> > +
> > + return ark_bb_config_device(ark_bb);
> > +}
> > +
> > +static int
> > +ark_bbdev_uninit(struct rte_bbdev *bbdev) {
> > + struct ark_bbdevice *ark_bb = bbdev->data->dev_private;
> > +
> > + if (rte_eal_process_type() != RTE_PROC_PRIMARY)
> > + return 0;
> > +
> > + ark_pktgen_uninit(ark_bb->pg);
> > + ark_pktchkr_uninit(ark_bb->pc);
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +ark_bbdev_probe(struct rte_pci_driver *pci_drv,
> > + struct rte_pci_device *pci_dev)
> > +{
> > + struct rte_bbdev *bbdev = NULL;
> > + char dev_name[RTE_BBDEV_NAME_MAX_LEN];
> > + struct ark_bbdevice *ark_bb;
> > +
> > + if (pci_dev == NULL)
> > + return -EINVAL;
> > +
> > + rte_pci_device_name(&pci_dev->addr, dev_name, sizeof(dev_name));
> > +
> > + /* Allocate memory to be used privately by drivers */
> > + bbdev = rte_bbdev_allocate(pci_dev->device.name);
> > + if (bbdev == NULL)
> > + return -ENODEV;
> > +
> > + /* allocate device private memory */
> > + bbdev->data->dev_private = rte_zmalloc_socket(dev_name,
> > + sizeof(struct ark_bbdevice),
> > + RTE_CACHE_LINE_SIZE,
> > + pci_dev->device.numa_node);
> > +
> > + if (bbdev->data->dev_private == NULL) {
> > + ARK_BBDEV_LOG(CRIT,
> > + "Allocate of %zu bytes for device \"%s\"
> > failed",
> > + sizeof(struct ark_bbdevice), dev_name);
> > + rte_bbdev_release(bbdev);
> > + return -ENOMEM;
> > + }
> > + ark_bb = bbdev->data->dev_private;
> > + /* Initialize ark_bb */
> > + ark_bb->pkt_dir_v = 0x00110110;
> > +
> > + /* Fill HW specific part of device structure */
> > + bbdev->device = &pci_dev->device;
> > + bbdev->intr_handle = NULL;
> > + bbdev->data->socket_id = pci_dev->device.numa_node;
> > + bbdev->dev_ops = &ark_bbdev_pmd_ops;
> > + if (pci_dev->device.devargs)
> > + parse_ark_bbdev_params(pci_dev->device.devargs->args,
> > ark_bb);
> > +
> > +
> > + /* Device specific initialization */
> > + if (ark_bbdev_init(bbdev, pci_drv))
> > + return -EIO;
> > + if (ark_bbdev_start(bbdev))
> > + return -EIO;
> > +
> > + /* Core operations LDPC encode amd decode */
> > + bbdev->enqueue_ldpc_enc_ops = ark_bb_enqueue_ldpc_enc_ops;
> > + bbdev->dequeue_ldpc_enc_ops = ark_bb_dequeue_ldpc_enc_ops;
> > + bbdev->enqueue_ldpc_dec_ops = ark_bb_enqueue_ldpc_dec_ops;
> > + bbdev->dequeue_ldpc_dec_ops = ark_bb_dequeue_ldpc_dec_ops;
> > +
> > + ARK_BBDEV_LOG(DEBUG, "bbdev id = %u [%s]",
> > + bbdev->data->dev_id, dev_name);
> > +
> > + return 0;
> > +}
> > +
> > +/* Uninitialize device */
> > +static int
> > +ark_bbdev_remove(struct rte_pci_device *pci_dev) {
> > + struct rte_bbdev *bbdev;
> > + int ret;
> > +
> > + if (pci_dev == NULL)
> > + return -EINVAL;
> > +
> > + /* Find device */
> > + bbdev = rte_bbdev_get_named_dev(pci_dev->device.name);
> > + if (bbdev == NULL) {
> > + ARK_BBDEV_LOG(CRIT,
> > + "Couldn't find HW dev \"%s\" to
> Uninitialize
> > it",
> > + pci_dev->device.name);
> > + return -ENODEV;
> > + }
> > +
> > + /* Arkville device close */
> > + ark_bbdev_uninit(bbdev);
> > + rte_free(bbdev->data->dev_private);
> > +
> > + /* Close device */
> > + ret = rte_bbdev_close(bbdev->data->dev_id);
> > + if (ret < 0)
> > + ARK_BBDEV_LOG(ERR,
> > + "Device %i failed to close during remove:
> %i",
> > + bbdev->data->dev_id, ret);
> > +
> > + return rte_bbdev_release(bbdev);
> > +}
> > +
> > +/* Operation for the PMD */
> > +static const struct rte_bbdev_ops ark_bbdev_pmd_ops = {
> > + .info_get = ark_bbdev_info_get,
> > + .start = ark_bbdev_start,
> > + .stop = ark_bbdev_stop,
> > + .queue_setup = ark_bb_q_setup,
> > + .queue_release = ark_bb_q_release,
> > + .queue_start = ark_bb_q_start,
> > + .queue_stop = ark_bb_q_stop,
> > +};
> > +
> > +
> > +
> > +static struct rte_pci_driver ark_bbdev_pmd_drv = {
> > + .probe = ark_bbdev_probe,
> > + .remove = ark_bbdev_remove,
> > + .id_table = pci_id_ark,
> > + .drv_flags = RTE_PCI_DRV_NEED_MAPPING
> > +};
> > +
> > +RTE_PMD_REGISTER_PCI(DRIVER_NAME, ark_bbdev_pmd_drv);
> > +RTE_PMD_REGISTER_PCI_TABLE(DRIVER_NAME, pci_id_ark);
> > +RTE_PMD_REGISTER_PARAM_STRING(DRIVER_NAME,
> > + ARK_BBDEV_PKTGEN_ARG "=<filename> "
> > + ARK_BBDEV_PKTCHKR_ARG "=<filename> "
> > + ARK_BBDEV_PKTDIR_ARG "=<bitmap>"
> > + );
> > diff --git a/drivers/baseband/ark/ark_bbdev_common.c
> > b/drivers/baseband/ark/ark_bbdev_common.c
> > new file mode 100644
> > index 0000000000..6ef0f43654
> > --- /dev/null
> > +++ b/drivers/baseband/ark/ark_bbdev_common.c
> > @@ -0,0 +1,125 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2016-2021 Atomic Rules LLC */
> > +
> > +#include <string.h>
> > +
> > +#include <rte_kvargs.h>
> > +#include <rte_log.h>
> > +
> > +#include "ark_bbdev_common.h"
> > +
> > +static const char * const ark_bbdev_valid_params[] = {
> > + ARK_BBDEV_PKTDIR_ARG,
> > + ARK_BBDEV_PKTGEN_ARG,
> > + ARK_BBDEV_PKTCHKR_ARG,
> > + NULL
> > +};
> > +
> > +/* Parse 16-bit integer from string argument */ static inline int
> > +parse_u16_arg(const char *key, const char *value, void *extra_args) {
> > + uint16_t *u16 = extra_args;
> > + unsigned int long result;
> > +
> > + if ((value == NULL) || (extra_args == NULL))
> > + return -EINVAL;
> > + errno = 0;
> > + result = strtoul(value, NULL, 0);
> > + if ((result >= (1 << 16)) || (errno != 0)) {
> > + ARK_BBDEV_LOG(ERR, "Invalid value %" PRIu64 " for %s",
> > result, key);
> > + return -ERANGE;
> > + }
> > + *u16 = (uint16_t)result;
> > + return 0;
> > +}
> > +
> > +static inline int
> > +process_pktdir_arg(const char *key, const char *value,
> > + void *extra_args)
> > +{
> > + uint32_t *u32 = extra_args;
> > + ARK_BBDEV_LOG(DEBUG, "key = %s, value = %s", key, value);
> > +
> > + *u32 = strtol(value, NULL, 0);
> > + ARK_BBDEV_LOG(DEBUG, "pkt_dir_v = 0x%x", *u32);
> > + return 0;
> > +}
> > +
> > +static inline int
> > +process_file_args(const char *key, const char *value, void *extra_args)
> > +{
> > + char *args = (char *)extra_args;
> > + ARK_BBDEV_LOG(DEBUG, "key = %s, value = %s", key, value);
> > +
> > + /* Open the configuration file */
> > + FILE *file = fopen(value, "r");
> > + char line[ARK_MAX_ARG_LEN];
> > + int size = 0;
> > + int first = 1;
> > +
> > + if (file == NULL) {
> > + ARK_BBDEV_LOG(ERR, "Unable to open config file %s",
> > + value);
> > + return -1;
> > + }
> > +
> > + while (fgets(line, sizeof(line), file)) {
> > + size += strlen(line);
> > + if (size >= ARK_MAX_ARG_LEN) {
> > + ARK_BBDEV_LOG(ERR, "Unable to parse file %s args,
> > "
> > + "parameter list is too long", value);
> > + fclose(file);
> > + return -1;
> > + }
> > + if (first) {
> > + strncpy(args, line, ARK_MAX_ARG_LEN);
> > + first = 0;
> > + } else {
> > + strncat(args, line, ARK_MAX_ARG_LEN);
> > + }
> > + }
> > + ARK_BBDEV_LOG(DEBUG, "file = %s", args);
> > + fclose(file);
> > + return 0;
> > +}
> > +
> > +
> > +/* Parse parameters used to create device */ int
> > +parse_ark_bbdev_params(const char *input_args,
> > + struct ark_bbdevice *ark_bb)
> > +{
> > + struct rte_kvargs *kvlist = NULL;
> > + int ret = 0;
> > +
> > + if (ark_bb == NULL)
> > + return -EINVAL;
> > + if (input_args == NULL)
> > + return ret;
> > +
> > + kvlist = rte_kvargs_parse(input_args, ark_bbdev_valid_params);
> > + if (kvlist == NULL)
> > + return -EFAULT;
> > +
> > + ret = rte_kvargs_process(kvlist, ARK_BBDEV_PKTDIR_ARG,
> > + &process_pktdir_arg, &ark_bb->pkt_dir_v);
> > + if (ret < 0)
> > + goto exit;
> > +
> > + ret = rte_kvargs_process(kvlist, ARK_BBDEV_PKTGEN_ARG,
> > + &process_file_args, &ark_bb-
> > >pkt_gen_args);
> > + if (ret < 0)
> > + goto exit;
> > +
> > + ret = rte_kvargs_process(kvlist, ARK_BBDEV_PKTCHKR_ARG,
> > + &process_file_args, &ark_bb-
> > >pkt_chkr_args);
> > + if (ret < 0)
> > + goto exit;
> > +
> > + exit:
> > + if (kvlist)
> > + rte_kvargs_free(kvlist);
> > + return ret;
> > +}
> > diff --git a/drivers/baseband/ark/ark_bbdev_common.h
> > b/drivers/baseband/ark/ark_bbdev_common.h
> > new file mode 100644
> > index 0000000000..670e7e86d6
> > --- /dev/null
> > +++ b/drivers/baseband/ark/ark_bbdev_common.h
> > @@ -0,0 +1,92 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2016-2021 Atomic Rules LLC */
> > +
> > +#ifndef _ARK_BBDEV_COMMON_H_
> > +#define _ARK_BBDEV_COMMON_H_
> > +
> > +#include "ark_pktchkr.h"
> > +#include "ark_pktdir.h"
> > +#include "ark_pktgen.h"
> > +
> > +#define ARK_MAX_ARG_LEN 256
> > +
> > +/* Acceptable params for ark BBDEV devices */
> > +/*
> > + * The packet generator is a functional block used to generate packet
> > + * patterns for testing. It is not intended for nominal use.
> > + */
> > +#define ARK_BBDEV_PKTGEN_ARG "Pkt_gen"
> > +
> > +/*
> > + * The packet checker is a functional block used to verify packet
> > + * patterns for testing. It is not intended for nominal use.
> > + */
> > +#define ARK_BBDEV_PKTCHKR_ARG "Pkt_chkr"
> > +
> > +/*
> > + * The packet director is used to select the internal ingress and
> > + * egress packets paths during testing. It is not intended for
> > + * nominal use.
> > + */
> > +#define ARK_BBDEV_PKTDIR_ARG "Pkt_dir"
> > +
> > +
> > +#define def_ptr(type, name) \
> > + union type { \
> > + uint64_t *t64; \
> > + uint32_t *t32; \
> > + uint16_t *t16; \
> > + uint8_t *t8; \
> > + void *v; \
> > + } name
> > +
> > +/*
> > + * Structure to store private data for each PF/VF instance.
> > + */
> > +struct ark_bbdevice {
> > + /* Our Bar 0 */
> > + uint8_t *bar0;
> > +
> > + /* Application Bar needed for extensions */
> > + uint8_t *a_bar;
> > +
> > + /* Arkville hardware block offsets */
> > + def_ptr(sys_ctrl, sysctrl);
> > + def_ptr(pkt_gen, pktgen);
> > + def_ptr(mpu_rx, mpurx);
> > + def_ptr(UDM, udm);
> > + def_ptr(mpu_tx, mputx);
> > + def_ptr(DDM, ddm);
> > + def_ptr(pkt_dir, pktdir);
> > + def_ptr(pkt_chkr, pktchkr);
> > + struct ark_rqpace_t *rqpacing;
> > +
> > + /* Pointers to packet generator and checker */
> > + int start_pg;
> > + ark_pkt_gen_t pg;
> > + ark_pkt_chkr_t pc;
> > + ark_pkt_dir_t pd;
> > +
> > + /* Packet generator/checker args */
> > + char pkt_gen_args[ARK_MAX_ARG_LEN];
> > + char pkt_chkr_args[ARK_MAX_ARG_LEN];
> > + uint32_t pkt_dir_v;
> > +
> > + int started;
> > + unsigned int max_nb_queues; /**< Max number of queues */
> > +
> > +};
> > +
> > +
> > +/* Log message for PMD */
> > +extern int ark_bbdev_logtype;
> > +
> > +/* Helper macro for logging */
> > +#define ARK_BBDEV_LOG(level, fmt, ...) \
> > + rte_log(RTE_LOG_ ## level, ark_bbdev_logtype, \
> > + "ARK_BBD: " fmt "\n", ##__VA_ARGS__)
> > +
> > +int parse_ark_bbdev_params(const char *argv, struct ark_bbdevice *dev);
> > +
> > +#endif
> > diff --git a/drivers/baseband/ark/ark_bbdev_custom.c
> > b/drivers/baseband/ark/ark_bbdev_custom.c
> > new file mode 100644
> > index 0000000000..6b1553abe1
> > --- /dev/null
> > +++ b/drivers/baseband/ark/ark_bbdev_custom.c
> > @@ -0,0 +1,201 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2016-2021 Atomic Rules LLC */
> > +
> > +#include <rte_bbdev.h>
> > +#include <rte_bbdev_pmd.h>
> > +
> > +#include <rte_mbuf.h>
> > +#include <rte_hexdump.h> /* For debug */
> > +
> > +
> > +#include "ark_bbdev_common.h"
> > +#include "ark_bbdev_custom.h"
> > +
> > +/* It is expected that functions in this file will be modified based on
> > + * specifics of the FPGA hardware beyond the core Arkville
> > + * components.
> > + */
> > +
> > +/* bytyes must be range of 0 to 20 */
> > +static inline
> > +uint8_t ark_bb_cvt_bytes_meta_cnt(size_t bytes) {
> > + return (bytes + 3) / 8;
> > +}
> > +
> > +void
> > +ark_bbdev_info_get(struct rte_bbdev *dev,
> > + struct rte_bbdev_driver_info *dev_info) {
> > + struct ark_bbdevice *ark_bb = dev->data->dev_private;
> > +
> > + static const struct rte_bbdev_op_cap bbdev_capabilities[] = {
> > + {
> > + .type = RTE_BBDEV_OP_LDPC_DEC,
> > + .cap.ldpc_dec = {
> > + .capability_flags =
> > + RTE_BBDEV_LDPC_CRC_24B_ATTACH
> > |
> > + RTE_BBDEV_LDPC_RATE_MATCH,
> > + .num_buffers_src =
> > +
> > RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
> > + .num_buffers_hard_out =
> > +
> > RTE_BBDEV_LDPC_MAX_CODE_BLOCKS
> > + }
> > + },
> > + {
> > + .type = RTE_BBDEV_OP_LDPC_ENC,
> > + .cap.ldpc_enc = {
> > + .capability_flags =
> > + RTE_BBDEV_LDPC_CRC_24B_ATTACH
> > |
> > + RTE_BBDEV_LDPC_RATE_MATCH,
> > + .num_buffers_src =
> > +
> > RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
> > + .num_buffers_dst =
> > +
> > RTE_BBDEV_LDPC_MAX_CODE_BLOCKS
> > + }
> > + },
> > + RTE_BBDEV_END_OF_CAPABILITIES_LIST(),
> > + };
> > +
> > + static struct rte_bbdev_queue_conf default_queue_conf = {
> > + .queue_size = RTE_BBDEV_QUEUE_SIZE_LIMIT,
> > + };
> > +
> > + default_queue_conf.socket = dev->data->socket_id;
> > +
> > + dev_info->driver_name = RTE_STR(DRIVER_NAME);
> > + dev_info->max_num_queues = ark_bb->max_nb_queues;
> > + dev_info->queue_size_lim = RTE_BBDEV_QUEUE_SIZE_LIMIT;
> > + dev_info->hardware_accelerated = true;
> > + dev_info->max_dl_queue_priority = 0;
> > + dev_info->max_ul_queue_priority = 0;
> > + dev_info->default_queue_conf = default_queue_conf;
> > + dev_info->capabilities = bbdev_capabilities;
> > + dev_info->cpu_flag_reqs = NULL;
> > + dev_info->min_alignment = 4;
> > +
> > +}
> > +
> > +/* Structure defining layout of the ldpc command struct */ struct
> > +ark_bb_ldpc_enc_meta {
> > + uint16_t header;
> > + uint8_t rv_index:2,
> > + basegraph:1,
> > + code_block_mode:1,
> > + rfu_71_68:4;
> > +
> > + uint8_t q_m;
> > + uint32_t e_ea;
> > + uint32_t eb;
> > + uint8_t c;
> > + uint8_t cab;
> > + uint16_t n_cb;
> > + uint16_t pad;
> > + uint16_t trailer;
> > +} __rte_packed;
> > +
> > +/* The size must be less then 20 Bytes */ static_assert(sizeof(struct
> > +ark_bb_ldpc_enc_meta) <= 20, "struct size");
> > +
> > +/* Custom operation on equeue ldpc operation */
> > +/* Do these function need queue number? */
> > +/* Maximum of 20 bytes */
> > +int
> > +ark_bb_user_enqueue_ldpc_enc(struct rte_bbdev_enc_op *enc_op,
> > + uint32_t *meta, uint8_t *meta_cnt) {
> > + struct rte_bbdev_op_ldpc_enc *ldpc_enc_op = &enc_op->ldpc_enc;
> > + struct ark_bb_ldpc_enc_meta *src = (struct ark_bb_ldpc_enc_meta
> > +*)meta;
> > +
> > + src->header = 0x4321; /* For testings */
> > + src->trailer = 0xFEDC;
> > +
> > + src->rv_index = ldpc_enc_op->rv_index;
> > + src->basegraph = ldpc_enc_op->basegraph;
> > + src->code_block_mode = ldpc_enc_op->code_block_mode;
> > +
> > + src->q_m = ldpc_enc_op->q_m;
> > + src->e_ea = 0xABCD;
> > + src->eb = ldpc_enc_op->tb_params.eb;
> > + src->c = ldpc_enc_op->tb_params.c;
> > + src->cab = ldpc_enc_op->tb_params.cab;
> > +
> > + src->n_cb = 0;
> > +
> > + meta[0] = 0x11111110;
> > + meta[1] = 0x22222220;
> > + meta[2] = 0x33333330;
> > + meta[3] = 0x44444440;
> > + meta[4] = 0x55555550;
> > +
> > + *meta_cnt = ark_bb_cvt_bytes_meta_cnt(
> > + sizeof(struct ark_bb_ldpc_enc_meta));
> > + return 0;
> > +}
> > +
> > +/* Custom operation on dequeue ldpc operation */ int
> > +ark_bb_user_dequeue_ldpc_enc(struct rte_bbdev_enc_op *enc_op,
> > + const uint32_t *usermeta)
> > +{
> > + static int dump; /* = 0 */
> > + /* Just compare with what was sent? */
> > + uint32_t meta_in[5] = {0};
> > + uint8_t meta_cnt;
> > +
> > + ark_bb_user_enqueue_ldpc_enc(enc_op, meta_in, &meta_cnt);
> > + if (memcmp(usermeta, meta_in, 3 + (meta_cnt * 8))) {
> > + fprintf(stderr,
> > + "------------------------------------------\n");
> > + rte_hexdump(stdout, "meta difference for lpdc_enc IN",
> > + meta_in, 20);
> > + rte_hexdump(stdout, "meta difference for lpdc_enc OUT",
> > + usermeta, 20);
> > + } else if (dump) {
> > + rte_hexdump(stdout, "DUMP lpdc_enc IN", usermeta, 20);
> > + dump--;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +
> > +/* Turbo op call backs for user meta data */ int
> > +ark_bb_user_enqueue_ldpc_dec(struct rte_bbdev_dec_op *enc_op,
> > + uint32_t *meta, uint8_t *meta_cnt) {
> > + RTE_SET_USED(enc_op);
> > + meta[0] = 0xF1111110;
> > + meta[1] = 0xF2222220;
> > + meta[2] = 0xF3333330;
> > + meta[3] = 0xF4444440;
> > + meta[4] = 0xF5555550;
> > +
> > + *meta_cnt = ark_bb_cvt_bytes_meta_cnt(20);
> > + return 0;
> > +}
> > +
> > +int ark_bb_user_dequeue_ldpc_dec(struct rte_bbdev_dec_op *enc_op,
> > + const uint32_t *usermeta)
> > +{
> > + RTE_SET_USED(enc_op);
> > + static int dump; /* = 0 */
> > + /* Just compare with what was sent? */
> > + uint32_t meta_in[5] = {0};
> > + uint8_t meta_cnt;
> > +
> > + ark_bb_user_enqueue_ldpc_dec(enc_op, meta_in, &meta_cnt);
> > + if (memcmp(usermeta, meta_in, 3 + (meta_cnt * 8))) {
> > + fprintf(stderr,
> > + "------------------------------------------\n");
> > + rte_hexdump(stdout, "meta difference for lpdc_enc IN",
> > + meta_in, 20);
> > + rte_hexdump(stdout, "meta difference for lpdc_enc OUT",
> > + usermeta, 20);
> > + } else if (dump) {
> > + rte_hexdump(stdout, "DUMP lpdc_enc IN", usermeta, 20);
> > + dump--;
> > + }
> > + return 0;
> > +}
> > diff --git a/drivers/baseband/ark/ark_bbdev_custom.h
> > b/drivers/baseband/ark/ark_bbdev_custom.h
> > new file mode 100644
> > index 0000000000..32a2ef6bb6
> > --- /dev/null
> > +++ b/drivers/baseband/ark/ark_bbdev_custom.h
> > @@ -0,0 +1,30 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2016-2021 Atomic Rules LLC */
> > +
> > +#ifndef _ARK_BBDEV_CUSTOM_H_
> > +#define _ARK_BBDEV_CUSTOM_H_
> > +
> > +#include <stdint.h>
> > +
> > +/* Forward declarations */
> > +struct rte_bbdev;
> > +struct rte_bbdev_driver_info;
> > +struct rte_bbdev_enc_op;
> > +struct rte_bbdev_dec_op;
> > +struct rte_mbuf;
> > +
> > +void ark_bbdev_info_get(struct rte_bbdev *dev,
> > + struct rte_bbdev_driver_info *dev_info);
> > +
> > +int ark_bb_user_enqueue_ldpc_dec(struct rte_bbdev_dec_op *enc_op,
> > + uint32_t *meta, uint8_t *meta_cnt); int
> > +ark_bb_user_dequeue_ldpc_dec(struct rte_bbdev_dec_op *enc_op,
> > + const uint32_t *usermeta);
> > +
> > +int ark_bb_user_enqueue_ldpc_enc(struct rte_bbdev_enc_op *enc_op,
> > + uint32_t *meta, uint8_t *meta_cnt); int
> > +ark_bb_user_dequeue_ldpc_enc(struct rte_bbdev_enc_op *enc_op,
> > + const uint32_t *usermeta);
> > +
> > +#endif
> > diff --git a/drivers/baseband/ark/meson.build
> > b/drivers/baseband/ark/meson.build
> > new file mode 100644
> > index 0000000000..b876f05c6e
> > --- /dev/null
> > +++ b/drivers/baseband/ark/meson.build
> > @@ -0,0 +1,11 @@
> > +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Luca
> > +Boccassi <bluca@debian.org>
> > +
> > +deps += ['common_ark', 'bbdev', 'bus_pci', 'pci', 'ring'] sources =
> > +files(
> > + 'ark_bbdev.c',
> > + 'ark_bbdev_common.c',
> > + 'ark_bbdev_custom.c'
> > + )
> > +
> > +includes += include_directories('../../common/ark')
> > diff --git a/drivers/baseband/ark/version.map
> > b/drivers/baseband/ark/version.map
> > new file mode 100644
> > index 0000000000..4a76d1d52d
> > --- /dev/null
> > +++ b/drivers/baseband/ark/version.map
> > @@ -0,0 +1,3 @@
> > +DPDK_21 {
> > + local: *;
> > +};
> > --
> > 2.25.1
>
>
[-- Attachment #2: Type: text/html, Size: 78141 bytes --]
next prev parent reply other threads:[~2022-04-28 10:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-21 15:18 [PATCH 01/10] doc/guides/bbdevs: add ark baseband device documentation John Miller
2022-04-21 15:18 ` [PATCH 02/10] common/ark: create common subdirectory for baseband support John Miller
2022-04-21 15:18 ` [PATCH 03/10] common/ark: move common files to common subdirectory John Miller
2022-04-21 15:18 ` [PATCH 04/10] common/meson.build: John Miller
2022-04-21 15:18 ` [PATCH 05/10] baseband/ark: add ark baseband device John Miller
2022-04-27 18:38 ` Chautru, Nicolas
2022-04-28 10:01 ` John Miller [this message]
2022-04-21 15:18 ` [PATCH 06/10] net/ark: add ark PMD log interface John Miller
2022-04-21 15:18 ` [PATCH 07/10] maintainers: add baseband ark maintainers John Miller
2022-04-21 15:18 ` [PATCH 08/10] baseband/ark: add ark baseband user extensions John Miller
2022-04-21 15:18 ` [PATCH 09/10] baseband/meson.build: John Miller
2022-04-21 15:19 ` [PATCH 10/10] net/ark: repair meson dependency format John Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAL4cyUZYZJ7GCNg=fOgOp2roF24_37jrJNo2FB-wF7EnC_7LTA@mail.gmail.com' \
--to=john.miller@atomicrules.com \
--cc=dev@dpdk.org \
--cc=ed.czeck@atomicrules.com \
--cc=ferruh.yigit@xilinx.com \
--cc=nicolas.chautru@intel.com \
--cc=shepard.siegel@atomicrules.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).