From: Jerin Jacob <jerinjacobk@gmail.com>
To: Harman Kalra <hkalra@marvell.com>
Cc: dpdk-dev <dev@dpdk.org>, Nithin Dabilpuram <ndabilpuram@marvell.com>
Subject: Re: [PATCH v2] common/cnxk: enable NIX Tx interrupts errata
Date: Thu, 17 Feb 2022 14:57:14 +0530 [thread overview]
Message-ID: <CALBAE1MiqOVUDH8DbEdr+LmWVyGBqjQH-ZL3A4X2NU2KGrN+VA@mail.gmail.com> (raw)
In-Reply-To: <20220131105210.183152-1-hkalra@marvell.com>
On Mon, Jan 31, 2022 at 4:22 PM Harman Kalra <hkalra@marvell.com> wrote:
>
> An errata exists whereby NIX may incorrectly overwrite the value in
> NIX_SQ_CTX_S[SQ_INT]. This may cause set interrupts to get cleared or
> causing an QINT when no error is outstanding.
> As a workaround, software should always read all SQ debug registers
> and not just rely on NIX_SQINT_E bits set in NIX_SQ_CTX_S[SQ_INT].
> Also for detecting SQB faults software must read SQ context and
> check id next_sqb is NULL.
>
> Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Applied to dpdk-next-net-mrvl/for-next-net. Thanks
> ---
> V2:
> * Rebase on branch code
>
> drivers/common/cnxk/roc_nix_irq.c | 64 ++++++++++++++++++++++---------
> 1 file changed, 46 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/common/cnxk/roc_nix_irq.c b/drivers/common/cnxk/roc_nix_irq.c
> index 7dcd533ea9..71971ef261 100644
> --- a/drivers/common/cnxk/roc_nix_irq.c
> +++ b/drivers/common/cnxk/roc_nix_irq.c
> @@ -196,18 +196,42 @@ nix_lf_sq_irq_get_and_clear(struct nix *nix, uint16_t sq)
> return nix_lf_q_irq_get_and_clear(nix, sq, NIX_LF_SQ_OP_INT, ~0x1ff00);
> }
>
> -static inline void
> +static inline bool
> +nix_lf_is_sqb_null(struct dev *dev, int q)
> +{
> + bool is_sqb_null = false;
> + volatile void *ctx;
> + int rc;
> +
> + rc = nix_q_ctx_get(dev, NIX_AQ_CTYPE_SQ, q, &ctx);
> + if (rc) {
> + plt_err("Failed to get sq context");
> + } else {
> + is_sqb_null =
> + roc_model_is_cn9k() ?
> + (((__io struct nix_sq_ctx_s *)ctx)->next_sqb ==
> + 0) :
> + (((__io struct nix_cn10k_sq_ctx_s *)ctx)
> + ->next_sqb == 0);
> + }
> +
> + return is_sqb_null;
> +}
> +
> +static inline uint8_t
> nix_lf_sq_debug_reg(struct nix *nix, uint32_t off)
> {
> + uint8_t err = 0;
> uint64_t reg;
>
> reg = plt_read64(nix->base + off);
> if (reg & BIT_ULL(44)) {
> - plt_err("SQ=%d err_code=0x%x", (int)((reg >> 8) & 0xfffff),
> - (uint8_t)(reg & 0xff));
> + err = reg & 0xff;
> /* Clear valid bit */
> plt_write64(BIT_ULL(44), nix->base + off);
> }
> +
> + return err;
> }
>
> static void
> @@ -229,6 +253,7 @@ nix_lf_q_irq(void *param)
> struct dev *dev = &nix->dev;
> int q, cq, rq, sq;
> uint64_t intr;
> + uint8_t rc;
>
> intr = plt_read64(nix->base + NIX_LF_QINTX_INT(qintx));
> if (intr == 0)
> @@ -269,22 +294,25 @@ nix_lf_q_irq(void *param)
> sq = q % nix->qints;
> irq = nix_lf_sq_irq_get_and_clear(nix, sq);
>
> - if (irq & BIT_ULL(NIX_SQINT_LMT_ERR)) {
> - plt_err("SQ=%d NIX_SQINT_LMT_ERR", sq);
> - nix_lf_sq_debug_reg(nix, NIX_LF_SQ_OP_ERR_DBG);
> - }
> - if (irq & BIT_ULL(NIX_SQINT_MNQ_ERR)) {
> - plt_err("SQ=%d NIX_SQINT_MNQ_ERR", sq);
> - nix_lf_sq_debug_reg(nix, NIX_LF_MNQ_ERR_DBG);
> - }
> - if (irq & BIT_ULL(NIX_SQINT_SEND_ERR)) {
> - plt_err("SQ=%d NIX_SQINT_SEND_ERR", sq);
> - nix_lf_sq_debug_reg(nix, NIX_LF_SEND_ERR_DBG);
> - }
> - if (irq & BIT_ULL(NIX_SQINT_SQB_ALLOC_FAIL)) {
> + /* Detect LMT store error */
> + rc = nix_lf_sq_debug_reg(nix, NIX_LF_SQ_OP_ERR_DBG);
> + if (rc)
> + plt_err("SQ=%d NIX_SQINT_LMT_ERR, errcode %x", sq, rc);
> +
> + /* Detect Meta-descriptor enqueue error */
> + rc = nix_lf_sq_debug_reg(nix, NIX_LF_MNQ_ERR_DBG);
> + if (rc)
> + plt_err("SQ=%d NIX_SQINT_MNQ_ERR, errcode %x", sq, rc);
> +
> + /* Detect Send error */
> + rc = nix_lf_sq_debug_reg(nix, NIX_LF_SEND_ERR_DBG);
> + if (rc)
> + plt_err("SQ=%d NIX_SQINT_SEND_ERR, errcode %x", sq, rc);
> +
> + /* Detect SQB fault, read SQ context to check SQB NULL case */
> + if (irq & BIT_ULL(NIX_SQINT_SQB_ALLOC_FAIL) ||
> + nix_lf_is_sqb_null(dev, q))
> plt_err("SQ=%d NIX_SQINT_SQB_ALLOC_FAIL", sq);
> - nix_lf_sq_debug_reg(nix, NIX_LF_SEND_ERR_DBG);
> - }
> }
>
> /* Clear interrupt */
> --
> 2.18.0
>
prev parent reply other threads:[~2022-02-17 9:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-13 12:18 [PATCH] " Harman Kalra
2022-01-20 8:45 ` Jerin Jacob
2022-01-31 10:52 ` [PATCH v2] " Harman Kalra
2022-02-17 9:27 ` Jerin Jacob [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CALBAE1MiqOVUDH8DbEdr+LmWVyGBqjQH-ZL3A4X2NU2KGrN+VA@mail.gmail.com \
--to=jerinjacobk@gmail.com \
--cc=dev@dpdk.org \
--cc=hkalra@marvell.com \
--cc=ndabilpuram@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).