DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jerin Jacob <jerinjacobk@gmail.com>
To: Pavan Nikhilesh <pbhagavatula@marvell.com>
Cc: Jerin Jacob <jerinj@marvell.com>,
	Nithin Dabilpuram <ndabilpuram@marvell.com>,
	 Kiran Kumar K <kirankumark@marvell.com>, dpdk-dev <dev@dpdk.org>,
	dpdk stable <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] net/octeontx2: fix device configuration sequence
Date: Mon, 6 Apr 2020 11:49:57 +0530	[thread overview]
Message-ID: <CALBAE1NF6SAqLAwL2HBBcOzQ9EfxoZFK_TFs_g00A42FEPAGSg@mail.gmail.com> (raw)
In-Reply-To: <20200404151951.1013-1-pbhagavatula@marvell.com>

On Sat, Apr 4, 2020 at 8:50 PM <pbhagavatula@marvell.com> wrote:
>
> From: Pavan Nikhilesh <pbhagavatula@marvell.com>
>
> When an application invokes rte_eth_dev_configure consecutively without
> setting up Rx/Tx queues, it will incorrectly return error while trying
> to restore Rx/Tx queue configuration.
>
> Fix configuration sequence by checking if any Rx/Tx queues are
> previously configured before trying to restore them.
>
> Fixes: 548b5839a32b ("net/octeontx2: add device configure operation")
> Cc: stable@dpdk.org
>
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>


Acked-by: Jerin Jacob <jerinj@marvell.com>
Applied to dpdk-next-net-mrvl/master. Thanks


> ---
>  drivers/net/octeontx2/otx2_ethdev.c | 16 ++++++++++++----
>  drivers/net/octeontx2/otx2_ethdev.h |  1 +
>  2 files changed, 13 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
> index e60f4901c..9fbca2b05 100644
> --- a/drivers/net/octeontx2/otx2_ethdev.c
> +++ b/drivers/net/octeontx2/otx2_ethdev.c
> @@ -1132,10 +1132,12 @@ nix_store_queue_cfg_and_then_release(struct rte_eth_dev *eth_dev)
>         txq = (struct otx2_eth_txq **)eth_dev->data->tx_queues;
>         for (i = 0; i < nb_txq; i++) {
>                 if (txq[i] == NULL) {
> -                       otx2_err("txq[%d] is already released", i);
> -                       goto fail;
> +                       tx_qconf[i].valid = false;
> +                       otx2_info("txq[%d] is already released", i);
> +                       continue;
>                 }
>                 memcpy(&tx_qconf[i], &txq[i]->qconf, sizeof(*tx_qconf));
> +               tx_qconf[i].valid = true;
>                 otx2_nix_tx_queue_release(txq[i]);
>                 eth_dev->data->tx_queues[i] = NULL;
>         }
> @@ -1143,10 +1145,12 @@ nix_store_queue_cfg_and_then_release(struct rte_eth_dev *eth_dev)
>         rxq = (struct otx2_eth_rxq **)eth_dev->data->rx_queues;
>         for (i = 0; i < nb_rxq; i++) {
>                 if (rxq[i] == NULL) {
> -                       otx2_err("rxq[%d] is already released", i);
> -                       goto fail;
> +                       rx_qconf[i].valid = false;
> +                       otx2_info("rxq[%d] is already released", i);
> +                       continue;
>                 }
>                 memcpy(&rx_qconf[i], &rxq[i]->qconf, sizeof(*rx_qconf));
> +               rx_qconf[i].valid = true;
>                 otx2_nix_rx_queue_release(rxq[i]);
>                 eth_dev->data->rx_queues[i] = NULL;
>         }
> @@ -1201,6 +1205,8 @@ nix_restore_queue_cfg(struct rte_eth_dev *eth_dev)
>          * queues are already setup in port_configure().
>          */
>         for (i = 0; i < nb_txq; i++) {
> +               if (!tx_qconf[i].valid)
> +                       continue;
>                 rc = otx2_nix_tx_queue_setup(eth_dev, i, tx_qconf[i].nb_desc,
>                                              tx_qconf[i].socket_id,
>                                              &tx_qconf[i].conf.tx);
> @@ -1216,6 +1222,8 @@ nix_restore_queue_cfg(struct rte_eth_dev *eth_dev)
>         free(tx_qconf); tx_qconf = NULL;
>
>         for (i = 0; i < nb_rxq; i++) {
> +               if (!rx_qconf[i].valid)
> +                       continue;
>                 rc = otx2_nix_rx_queue_setup(eth_dev, i, rx_qconf[i].nb_desc,
>                                              rx_qconf[i].socket_id,
>                                              &rx_qconf[i].conf.rx,
> diff --git a/drivers/net/octeontx2/otx2_ethdev.h b/drivers/net/octeontx2/otx2_ethdev.h
> index e5684f9f0..238afb3a8 100644
> --- a/drivers/net/octeontx2/otx2_ethdev.h
> +++ b/drivers/net/octeontx2/otx2_ethdev.h
> @@ -196,6 +196,7 @@ struct otx2_eth_qconf {
>         void *mempool;
>         uint32_t socket_id;
>         uint16_t nb_desc;
> +       uint8_t valid;
>  };
>
>  struct otx2_fc_info {
> --
> 2.17.1
>

      reply	other threads:[~2020-04-06  6:20 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-04 15:19 pbhagavatula
2020-04-06  6:19 ` Jerin Jacob [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CALBAE1NF6SAqLAwL2HBBcOzQ9EfxoZFK_TFs_g00A42FEPAGSg@mail.gmail.com \
    --to=jerinjacobk@gmail.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=kirankumark@marvell.com \
    --cc=ndabilpuram@marvell.com \
    --cc=pbhagavatula@marvell.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).