From: Jerin Jacob <jerinjacobk@gmail.com>
To: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Cc: jerinj@marvell.com, erik.g.carrillo@intel.com,
abhinandan.gujjar@intel.com, dev@dpdk.org,
jay.jayatheerthan@intel.com
Subject: Re: [PATCH v6 3/3] eventdev/crypto: add params set/get APIs
Date: Mon, 13 Feb 2023 10:38:00 +0530 [thread overview]
Message-ID: <CALBAE1NOSGRwv9X3Hg0-vchjR2UGz6bSogAzrxYEnGE9PZ4bYA@mail.gmail.com> (raw)
In-Reply-To: <20230210173744.3597666-3-s.v.naga.harish.k@intel.com>
On Fri, Feb 10, 2023 at 11:08 PM Naga Harish K S V
<s.v.naga.harish.k@intel.com> wrote:
>
> The adapter runtime configuration parameters defined in the
> struct rte_event_crypto_adapter_runtime_params can be configured
> and retrieved using rte_event_crypto_adapter_runtime_params_set()
> and rte_event_eth_rx_adapter_runtime_params_get() respectively.
Typo: rte_event_crypto_adapter_runtime_params_get()
Series-Acked-by: Jerin Jacob <jerinj@marvell.com>
Updated the git commit as follows and series applied to
dpdk-next-net-eventdev/for-main. Thanks
commit 44fe1187305af8ac6d31c46113c1ca35405de77b (HEAD -> for-main,
origin/for-main, origin/HEAD)
Author: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Date: Fri Feb 10 11:37:44 2023 -0600
eventdev/crypto: support runtime set/get parameters
The adapter runtime configuration parameters defined in the
struct rte_event_crypto_adapter_runtime_params can be configured
and retrieved using rte_event_crypto_adapter_runtime_params_set()
and rte_event_crypto_adapter_runtime_params_get() respectively.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
commit 122812d1586437a6a09da132c23b6b6b41e90bef
Author: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Date: Fri Feb 10 11:37:43 2023 -0600
eventdev/eth_tx: support runtime set/get parameters
The adapter runtime configuration parameters defined in the
struct rte_event_eth_tx_adapter_runtime_params can be
configured and retrieved using
rte_event_eth_tx_adapter_runtime_params_set() and
rte_event_eth_tx_adapter_runtime_params_get() respectively.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
commit 496f7d5567ecb3c480ede0a90a3b4e987f6c7359
Author: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Date: Fri Feb 10 11:37:42 2023 -0600
eventdev/eth_rx: support runtime set/get parameters
The adapter runtime configuration parameters defined in the
struct rte_event_eth_rx_adapter_runtime_params can be configured
and retrieved using rte_event_eth_rx_adapter_runtime_params_set() and
rte_event_eth_rx_adapter_runtime_params_get() respectively.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
>
> Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
> ---
> v6:
> * updated doxygen comments as per review comments
> ---
> ---
> app/test/test_event_crypto_adapter.c | 109 ++++++++++++++++++
> .../prog_guide/event_crypto_adapter.rst | 8 ++
> lib/eventdev/rte_event_crypto_adapter.c | 101 ++++++++++++++++
> lib/eventdev/rte_event_crypto_adapter.h | 85 ++++++++++++++
> lib/eventdev/version.map | 3 +
> 5 files changed, 306 insertions(+)
>
> diff --git a/app/test/test_event_crypto_adapter.c b/app/test/test_event_crypto_adapter.c
> index a38e389abd..264d6f731e 100644
> --- a/app/test/test_event_crypto_adapter.c
> +++ b/app/test/test_event_crypto_adapter.c
> @@ -272,6 +272,111 @@ test_crypto_adapter_stats(void)
> return TEST_SUCCESS;
> }
>
> +static int
> +test_crypto_adapter_params(void)
> +{
> + int err;
> + struct rte_event_crypto_adapter_runtime_params in_params;
> + struct rte_event_crypto_adapter_runtime_params out_params;
> + uint32_t cap;
> + struct rte_event_crypto_adapter_queue_conf queue_conf = {
> + .ev = response_info,
> + };
> +
> + err = rte_event_crypto_adapter_caps_get(evdev, TEST_CDEV_ID, &cap);
> + TEST_ASSERT_SUCCESS(err, "Failed to get adapter capabilities\n");
> +
> + if (cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND) {
> + err = rte_event_crypto_adapter_queue_pair_add(TEST_ADAPTER_ID,
> + TEST_CDEV_ID, TEST_CDEV_QP_ID, &queue_conf);
> + } else
> + err = rte_event_crypto_adapter_queue_pair_add(TEST_ADAPTER_ID,
> + TEST_CDEV_ID, TEST_CDEV_QP_ID, NULL);
> +
> + TEST_ASSERT_SUCCESS(err, "Failed to add queue pair\n");
> +
> + err = rte_event_crypto_adapter_runtime_params_init(&in_params);
> + TEST_ASSERT(err == 0, "Expected 0 got %d", err);
> + err = rte_event_crypto_adapter_runtime_params_init(&out_params);
> + TEST_ASSERT(err == 0, "Expected 0 got %d", err);
> +
> + /* Case 1: Get the default value of mbufs processed by adapter */
> + err = rte_event_crypto_adapter_runtime_params_get(TEST_ADAPTER_ID,
> + &out_params);
> + TEST_ASSERT(err == 0, "Expected 0 got %d", err);
> +
> + /* Case 2: Set max_nb = 32 (=BATCH_SEIZE) */
> + in_params.max_nb = 32;
> +
> + err = rte_event_crypto_adapter_runtime_params_set(TEST_ADAPTER_ID,
> + &in_params);
> + TEST_ASSERT(err == 0, "Expected 0 got %d", err);
> +
> + err = rte_event_crypto_adapter_runtime_params_get(TEST_ADAPTER_ID,
> + &out_params);
> + TEST_ASSERT(err == 0, "Expected 0 got %d", err);
> + TEST_ASSERT(in_params.max_nb == out_params.max_nb, "Expected %u got %u",
> + in_params.max_nb, out_params.max_nb);
> +
> + /* Case 3: Set max_nb = 192 */
> + in_params.max_nb = 192;
> +
> + err = rte_event_crypto_adapter_runtime_params_set(TEST_ADAPTER_ID,
> + &in_params);
> + TEST_ASSERT(err == 0, "Expected 0 got %d", err);
> +
> + err = rte_event_crypto_adapter_runtime_params_get(TEST_ADAPTER_ID,
> + &out_params);
> + TEST_ASSERT(err == 0, "Expected 0 got %d", err);
> + TEST_ASSERT(in_params.max_nb == out_params.max_nb, "Expected %u got %u",
> + in_params.max_nb, out_params.max_nb);
> +
> + /* Case 4: Set max_nb = 256 */
> + in_params.max_nb = 256;
> +
> + err = rte_event_crypto_adapter_runtime_params_set(TEST_ADAPTER_ID,
> + &in_params);
> + TEST_ASSERT(err == 0, "Expected 0 got %d", err);
> +
> + err = rte_event_crypto_adapter_runtime_params_get(TEST_ADAPTER_ID,
> + &out_params);
> + TEST_ASSERT(err == 0, "Expected 0 got %d", err);
> + TEST_ASSERT(in_params.max_nb == out_params.max_nb, "Expected %u got %u",
> + in_params.max_nb, out_params.max_nb);
> +
> + /* Case 5: Set max_nb = 30(<BATCH_SIZE) */
> + in_params.max_nb = 30;
> +
> + err = rte_event_crypto_adapter_runtime_params_set(TEST_ADAPTER_ID,
> + &in_params);
> + TEST_ASSERT(err == 0, "Expected 0 got %d", err);
> +
> + err = rte_event_crypto_adapter_runtime_params_get(TEST_ADAPTER_ID,
> + &out_params);
> + TEST_ASSERT(err == 0, "Expected 0 got %d", err);
> + TEST_ASSERT(in_params.max_nb == out_params.max_nb, "Expected %u got %u",
> + in_params.max_nb, out_params.max_nb);
> +
> + /* Case 6: Set max_nb = 512 */
> + in_params.max_nb = 512;
> +
> + err = rte_event_crypto_adapter_runtime_params_set(TEST_ADAPTER_ID,
> + &in_params);
> + TEST_ASSERT(err == 0, "Expected 0 got %d", err);
> +
> + err = rte_event_crypto_adapter_runtime_params_get(TEST_ADAPTER_ID,
> + &out_params);
> + TEST_ASSERT(err == 0, "Expected 0 got %d", err);
> + TEST_ASSERT(in_params.max_nb == out_params.max_nb, "Expected %u got %u",
> + in_params.max_nb, out_params.max_nb);
> +
> + err = rte_event_crypto_adapter_queue_pair_del(TEST_ADAPTER_ID,
> + TEST_CDEV_ID, TEST_CDEV_QP_ID);
> + TEST_ASSERT_SUCCESS(err, "Failed to delete add queue pair\n");
> +
> + return TEST_SUCCESS;
> +}
> +
> static int
> test_op_forward_mode(uint8_t session_less)
> {
> @@ -1454,6 +1559,10 @@ static struct unit_test_suite functional_testsuite = {
> test_crypto_adapter_free,
> test_crypto_adapter_stats),
>
> + TEST_CASE_ST(test_crypto_adapter_create,
> + test_crypto_adapter_free,
> + test_crypto_adapter_params),
> +
> TEST_CASE_ST(test_crypto_adapter_conf_op_forward_mode,
> test_crypto_adapter_stop,
> test_session_with_op_forward_mode),
> diff --git a/doc/guides/prog_guide/event_crypto_adapter.rst b/doc/guides/prog_guide/event_crypto_adapter.rst
> index 46b3dc2f1c..1b6d4a0966 100644
> --- a/doc/guides/prog_guide/event_crypto_adapter.rst
> +++ b/doc/guides/prog_guide/event_crypto_adapter.rst
> @@ -350,3 +350,11 @@ in struct ``rte_event_crypto_adapter_stats``. The received packet and
> enqueued event counts are a sum of the counts from the eventdev PMD callbacks
> if the callback is supported, and the counts maintained by the service function,
> if one exists.
> +
> +Set/Get adapter runtime configuration parameters
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +The runtime configuration parameters of adapter can be set/get using
> +``rte_event_crypto_adapter_runtime_params_set()`` and
> +``rte_event_crypto_adapter_runtime_params_get()`` respectively. The parameters that
> +can be set/get are defined in ``struct rte_event_crypto_adapter_runtime_params``.
> diff --git a/lib/eventdev/rte_event_crypto_adapter.c b/lib/eventdev/rte_event_crypto_adapter.c
> index 7f0a25a4cc..f6c1e5380d 100644
> --- a/lib/eventdev/rte_event_crypto_adapter.c
> +++ b/lib/eventdev/rte_event_crypto_adapter.c
> @@ -1335,6 +1335,107 @@ rte_event_crypto_adapter_stats_reset(uint8_t id)
> return 0;
> }
>
> +int
> +rte_event_crypto_adapter_runtime_params_init(
> + struct rte_event_crypto_adapter_runtime_params *params)
> +{
> + if (params == NULL)
> + return -EINVAL;
> +
> + memset(params, 0, sizeof(*params));
> + params->max_nb = DEFAULT_MAX_NB;
> +
> + return 0;
> +}
> +
> +static int
> +crypto_adapter_cap_check(struct event_crypto_adapter *adapter)
> +{
> + int ret;
> + uint32_t caps;
> +
> + if (!adapter->nb_qps)
> + return -EINVAL;
> + ret = rte_event_crypto_adapter_caps_get(adapter->eventdev_id,
> + adapter->next_cdev_id,
> + &caps);
> + if (ret) {
> + RTE_EDEV_LOG_ERR("Failed to get adapter caps dev %" PRIu8
> + " cdev %" PRIu8, adapter->eventdev_id,
> + adapter->next_cdev_id);
> + return ret;
> + }
> +
> + if ((caps & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD) ||
> + (caps & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW))
> + return -ENOTSUP;
> +
> + return 0;
> +}
> +
> +int
> +rte_event_crypto_adapter_runtime_params_set(uint8_t id,
> + struct rte_event_crypto_adapter_runtime_params *params)
> +{
> + struct event_crypto_adapter *adapter;
> + int ret;
> +
> + if (eca_memzone_lookup())
> + return -ENOMEM;
> +
> + EVENT_CRYPTO_ADAPTER_ID_VALID_OR_ERR_RET(id, -EINVAL);
> +
> + if (params == NULL) {
> + RTE_EDEV_LOG_ERR("params pointer is NULL\n");
> + return -EINVAL;
> + }
> +
> + adapter = eca_id_to_adapter(id);
> + if (adapter == NULL)
> + return -EINVAL;
> +
> + ret = crypto_adapter_cap_check(adapter);
> + if (ret)
> + return ret;
> +
> + rte_spinlock_lock(&adapter->lock);
> + adapter->max_nb = params->max_nb;
> + rte_spinlock_unlock(&adapter->lock);
> +
> + return 0;
> +}
> +
> +int
> +rte_event_crypto_adapter_runtime_params_get(uint8_t id,
> + struct rte_event_crypto_adapter_runtime_params *params)
> +{
> + struct event_crypto_adapter *adapter;
> + int ret;
> +
> + if (eca_memzone_lookup())
> + return -ENOMEM;
> +
> +
> + EVENT_CRYPTO_ADAPTER_ID_VALID_OR_ERR_RET(id, -EINVAL);
> +
> + if (params == NULL) {
> + RTE_EDEV_LOG_ERR("params pointer is NULL\n");
> + return -EINVAL;
> + }
> +
> + adapter = eca_id_to_adapter(id);
> + if (adapter == NULL)
> + return -EINVAL;
> +
> + ret = crypto_adapter_cap_check(adapter);
> + if (ret)
> + return ret;
> +
> + params->max_nb = adapter->max_nb;
> +
> + return 0;
> +}
> +
> int
> rte_event_crypto_adapter_service_id_get(uint8_t id, uint32_t *service_id)
> {
> diff --git a/lib/eventdev/rte_event_crypto_adapter.h b/lib/eventdev/rte_event_crypto_adapter.h
> index fad4543506..4e1f1bb3a8 100644
> --- a/lib/eventdev/rte_event_crypto_adapter.h
> +++ b/lib/eventdev/rte_event_crypto_adapter.h
> @@ -138,6 +138,9 @@
> * - rte_event_crypto_adapter_stop()
> * - rte_event_crypto_adapter_stats_get()
> * - rte_event_crypto_adapter_stats_reset()
> + * - rte_event_crypto_adapter_runtime_params_get()
> + * - rte_event_crypto_adapter_runtime_params_init()
> + * - rte_event_crypto_adapter_runtime_params_set()
>
> * The application creates an instance using rte_event_crypto_adapter_create()
> * or rte_event_crypto_adapter_create_ext().
> @@ -253,6 +256,31 @@ struct rte_event_crypto_adapter_conf {
> */
> };
>
> +/**
> + * Adapter runtime configuration parameters
> + */
> +struct rte_event_crypto_adapter_runtime_params {
> + uint32_t max_nb;
> + /**< The adapter can return early if it has processed at least
> + * max_nb crypto ops. This isn't treated as a requirement; batching
> + * may cause the adapter to process more than max_nb crypto ops.
> + *
> + * rte_event_crypto_adapter_create() configures the
> + * adapter with default value of max_nb.
> + * rte_event_crypto_adapter_create_ext() configures the adapter with
> + * user provided value of max_nb through
> + * rte_event_crypto_adapter_conf::max_nb parameter.
> + * rte_event_cryptoadapter_runtime_params_set() allows to re-configure
> + * max_nb during runtime (after adding at least one queue pair)
> + *
> + * This is valid for the devices without
> + * RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD or
> + * RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW capability.
> + */
> + uint32_t rsvd[15];
> + /**< Reserved fields for future expansion */
> +};
> +
> #define RTE_EVENT_CRYPTO_ADAPTER_EVENT_VECTOR 0x1
> /**< This flag indicates that crypto operations processed on the crypto
> * adapter need to be vectorized
> @@ -608,6 +636,63 @@ rte_event_crypto_adapter_service_id_get(uint8_t id, uint32_t *service_id);
> int
> rte_event_crypto_adapter_event_port_get(uint8_t id, uint8_t *event_port_id);
>
> +/**
> + * Initialize the adapter runtime configuration parameters
> + *
> + * @param params
> + * A pointer to structure of type struct rte_event_crypto_adapter_runtime_params
> + *
> + * @return
> + * - 0: Success
> + * - <0: Error code on failure
> + */
> +__rte_experimental
> +int
> +rte_event_crypto_adapter_runtime_params_init(
> + struct rte_event_crypto_adapter_runtime_params *params);
> +
> +/**
> + * Set the adapter runtime configuration parameters
> + *
> + * @param id
> + * Adapter identifier
> + *
> + * @param params
> + * A pointer to structure of type struct rte_event_crypto_adapter_runtime_params
> + * with configuration parameter values. The reserved fields of this structure
> + * must be initialized to zero and the valid fields need to be set appropriately.
> + * This struct can be initialized using
> + * rte_event_crypto_adapter_runtime_params_init() API to default values or
> + * application may reset this struct and update required fields.
> + *
> + * @return
> + * - 0: Success
> + * - <0: Error code on failure
> + */
> +__rte_experimental
> +int
> +rte_event_crypto_adapter_runtime_params_set(uint8_t id,
> + struct rte_event_crypto_adapter_runtime_params *params);
> +
> +/**
> + * Get the adapter runtime configuration parameters
> + *
> + * @param id
> + * Adapter identifier
> + *
> + * @param[out] params
> + * A pointer to structure of type struct rte_event_crypto_adapter_runtime_params
> + * containing valid adapter parameters when return value is 0.
> + *
> + * @return
> + * - 0: Success
> + * - <0: Error code on failure
> + */
> +__rte_experimental
> +int
> +rte_event_crypto_adapter_runtime_params_get(uint8_t id,
> + struct rte_event_crypto_adapter_runtime_params *params);
> +
> /**
> * @warning
> * @b EXPERIMENTAL: this API may change without prior notice
> diff --git a/lib/eventdev/version.map b/lib/eventdev/version.map
> index 7b93736dff..3b17c84eae 100644
> --- a/lib/eventdev/version.map
> +++ b/lib/eventdev/version.map
> @@ -121,6 +121,9 @@ EXPERIMENTAL {
> rte_event_eth_tx_adapter_queue_stop;
>
> # added in 23.03
> + rte_event_crypto_adapter_runtime_params_get;
> + rte_event_crypto_adapter_runtime_params_init;
> + rte_event_crypto_adapter_runtime_params_set;
> rte_event_eth_rx_adapter_runtime_params_get;
> rte_event_eth_rx_adapter_runtime_params_init;
> rte_event_eth_rx_adapter_runtime_params_set;
> --
> 2.25.1
>
prev parent reply other threads:[~2023-02-13 5:08 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-07 16:18 [PATCH 1/3] eventdev/eth_rx: " Naga Harish K S V
2023-01-07 16:18 ` [PATCH 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-01-07 16:18 ` [PATCH 3/3] eventdev/crypto: " Naga Harish K S V
2023-01-18 10:22 ` [PATCH 1/3] eventdev/eth_rx: " Jerin Jacob
2023-01-20 8:58 ` Naga Harish K, S V
2023-01-20 9:32 ` Jerin Jacob
2023-01-20 10:33 ` Naga Harish K, S V
2023-01-23 9:31 ` Jerin Jacob
2023-01-23 18:07 ` Naga Harish K, S V
2023-01-23 18:04 ` [PATCH v2 " Naga Harish K S V
2023-01-23 18:04 ` [PATCH v2 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-01-23 18:04 ` [PATCH v2 3/3] eventdev/crypto: " Naga Harish K S V
2023-01-24 4:29 ` [PATCH v2 1/3] eventdev/eth_rx: " Jerin Jacob
2023-01-24 13:07 ` Naga Harish K, S V
2023-01-25 4:12 ` Jerin Jacob
2023-01-25 9:52 ` Naga Harish K, S V
2023-01-25 10:38 ` Jerin Jacob
2023-01-25 16:32 ` Naga Harish K, S V
2023-01-28 10:53 ` Jerin Jacob
2023-01-28 17:21 ` Stephen Hemminger
2023-01-30 9:56 ` Naga Harish K, S V
2023-01-30 14:43 ` Jerin Jacob
2023-02-02 16:12 ` Naga Harish K, S V
2023-02-03 9:44 ` Jerin Jacob
2023-02-06 6:21 ` Naga Harish K, S V
2023-02-06 16:38 ` Jerin Jacob
2023-02-09 17:00 ` Naga Harish K, S V
2023-02-09 16:57 ` [PATCH v3 " Naga Harish K S V
2023-02-09 16:57 ` [PATCH v3 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-09 16:57 ` [PATCH v3 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-10 1:55 ` [PATCH v3 1/3] eventdev/eth_rx: " Naga Harish K S V
2023-02-10 1:55 ` [PATCH v3 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 1:55 ` [PATCH v3 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-10 4:58 ` [PATCH v4 1/3] eventdev/eth_rx: " Naga Harish K S V
2023-02-10 4:58 ` [PATCH v4 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 4:58 ` [PATCH v4 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-10 6:30 ` [PATCH v4 1/3] eventdev/eth_rx: " Jerin Jacob
2023-02-10 13:33 ` [PATCH v5 " Naga Harish K S V
2023-02-10 13:33 ` [PATCH v5 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 13:33 ` [PATCH v5 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-10 13:58 ` [PATCH v5 1/3] eventdev/eth_rx: " Jerin Jacob
2023-02-10 17:42 ` Naga Harish K, S V
2023-02-10 13:46 ` Naga Harish K S V
2023-02-10 13:46 ` [PATCH v5 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 14:05 ` Jerin Jacob
2023-02-10 15:01 ` Naga Harish K, S V
2023-02-10 15:24 ` Jerin Jacob
2023-02-10 17:41 ` Naga Harish K, S V
2023-02-10 13:46 ` [PATCH v5 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-10 17:37 ` [PATCH v6 1/3] eventdev/eth_rx: " Naga Harish K S V
2023-02-10 17:37 ` [PATCH v6 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 17:37 ` [PATCH v6 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-13 5:08 ` Jerin Jacob [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CALBAE1NOSGRwv9X3Hg0-vchjR2UGz6bSogAzrxYEnGE9PZ4bYA@mail.gmail.com \
--to=jerinjacobk@gmail.com \
--cc=abhinandan.gujjar@intel.com \
--cc=dev@dpdk.org \
--cc=erik.g.carrillo@intel.com \
--cc=jay.jayatheerthan@intel.com \
--cc=jerinj@marvell.com \
--cc=s.v.naga.harish.k@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).