From: Jerin Jacob <jerinjacobk@gmail.com>
To: "Jayatheerthan, Jay" <jay.jayatheerthan@intel.com>
Cc: Weiguo Li <liwg06@foxmail.com>,
"Kundapura, Ganapati" <ganapati.kundapura@intel.com>,
"Naga Harish K, S V" <s.v.naga.harish.k@intel.com>,
"stephen@networkplumber.org" <stephen@networkplumber.org>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [PATCH v6] eventdev/eth_rx: fix memory leak when token parsing finished
Date: Fri, 18 Feb 2022 15:09:20 +0530 [thread overview]
Message-ID: <CALBAE1O5ELPzwtKev3MhvFvmrnLcPiQ8MW8=cHa5x3EH4S4V5w@mail.gmail.com> (raw)
In-Reply-To: <DM6PR11MB4348EF94A08453B86CC2724BFD299@DM6PR11MB4348.namprd11.prod.outlook.com>
On Fri, Feb 4, 2022 at 3:17 PM Jayatheerthan, Jay
<jay.jayatheerthan@intel.com> wrote:
>
> Looks good. Thanks Weiguo for posting this patch and addressing all the comments!
>
> Acked-by: Jay Jayatheerthan < jay.jayatheerthan@intel.com>
Applied to dpdk-next-net-eventdev/for-main. Thanks
>
> -Jay
>
>
>
> > -----Original Message-----
> > From: Weiguo Li <liwg06@foxmail.com>
> > Sent: Friday, February 4, 2022 1:51 PM
> > To: Jayatheerthan, Jay <jay.jayatheerthan@intel.com>
> > Cc: Kundapura, Ganapati <ganapati.kundapura@intel.com>; Naga Harish K, S V <s.v.naga.harish.k@intel.com>;
> > stephen@networkplumber.org; dev@dpdk.org
> > Subject: [PATCH v6] eventdev/eth_rx: fix memory leak when token parsing finished
> >
> > The memory get from strdup should be freed when parameter parsing
> > finished, and also should be freed when error occurs.
> >
> > Fixes: 814d01709328 ("eventdev/eth_rx: support telemetry")
> > Fixes: 9e583185318f ("eventdev/eth_rx: support telemetry")
> >
> > Signed-off-by: Weiguo Li <liwg06@foxmail.com>
> > Acked-by: Ganapati Kundapura <ganapati.kundapura@intel.com>
> >
> > ---
> > v6:
> > * fix double free problem in v5 as Jay noted
> > v5:
> > * fix according to Jay's comment.
> > * fix anothor bypassing the freeing of memory problem
> > v4:
> > * fix compilation issue
> > v3:
> > * validate "eth_dev_id" by rte_eth_dev_is_valid_port()
> > as Ganapati's comment.
> > * validate "token" by macros to reduce code redundancy.
> > * use new macros to avoid bypassing the freeing of memory problem.
> > v2:
> > * add memory check after strdup
> > ---
> > lib/eventdev/rte_event_eth_rx_adapter.c | 96 ++++++++++++++++++-------
> > 1 file changed, 72 insertions(+), 24 deletions(-)
> >
> > diff --git a/lib/eventdev/rte_event_eth_rx_adapter.c b/lib/eventdev/rte_event_eth_rx_adapter.c
> > index ae1e260c08..4da6f1ff90 100644
> > --- a/lib/eventdev/rte_event_eth_rx_adapter.c
> > +++ b/lib/eventdev/rte_event_eth_rx_adapter.c
> > @@ -293,6 +293,30 @@ rxa_event_buf_get(struct event_eth_rx_adapter *rx_adapter, uint16_t eth_dev_id,
> > } \
> > } while (0)
> >
> > +#define RTE_EVENT_ETH_RX_ADAPTER_ID_VALID_OR_GOTO_ERR_RET(id, retval) do { \
> > + if (!rxa_validate_id(id)) { \
> > + RTE_EDEV_LOG_ERR("Invalid eth Rx adapter id = %d\n", id); \
> > + ret = retval; \
> > + goto error; \
> > + } \
> > +} while (0)
> > +
> > +#define RTE_EVENT_ETH_RX_ADAPTER_TOKEN_VALID_OR_GOTO_ERR_RET(token, retval) do { \
> > + if ((token) == NULL || strlen(token) == 0 || !isdigit(*token)) { \
> > + RTE_EDEV_LOG_ERR("Invalid eth Rx adapter token\n"); \
> > + ret = retval; \
> > + goto error; \
> > + } \
> > +} while (0)
> > +
> > +#define RTE_ETH_VALID_PORTID_OR_GOTO_ERR_RET(port_id, retval) do { \
> > + if (!rte_eth_dev_is_valid_port(port_id)) { \
> > + RTE_ETHDEV_LOG(ERR, "Invalid port_id=%u\n", port_id); \
> > + ret = retval; \
> > + goto error; \
> > + } \
> > +} while (0)
> > +
> > static inline int
> > rxa_sw_adapter_queue_count(struct event_eth_rx_adapter *rx_adapter)
> > {
> > @@ -3323,7 +3347,7 @@ handle_rxa_get_queue_conf(const char *cmd __rte_unused,
> > {
> > uint8_t rx_adapter_id;
> > uint16_t rx_queue_id;
> > - int eth_dev_id;
> > + int eth_dev_id, ret = -1;
> > char *token, *l_params;
> > struct rte_event_eth_rx_adapter_queue_conf queue_conf;
> >
> > @@ -3332,33 +3356,37 @@ handle_rxa_get_queue_conf(const char *cmd __rte_unused,
> >
> > /* Get Rx adapter ID from parameter string */
> > l_params = strdup(params);
> > + if (l_params == NULL)
> > + return -ENOMEM;
> > token = strtok(l_params, ",");
> > + RTE_EVENT_ETH_RX_ADAPTER_TOKEN_VALID_OR_GOTO_ERR_RET(token, -1);
> > rx_adapter_id = strtoul(token, NULL, 10);
> > - RTE_EVENT_ETH_RX_ADAPTER_ID_VALID_OR_ERR_RET(rx_adapter_id, -EINVAL);
> > + RTE_EVENT_ETH_RX_ADAPTER_ID_VALID_OR_GOTO_ERR_RET(rx_adapter_id, -EINVAL);
> >
> > token = strtok(NULL, ",");
> > - if (token == NULL || strlen(token) == 0 || !isdigit(*token))
> > - return -1;
> > + RTE_EVENT_ETH_RX_ADAPTER_TOKEN_VALID_OR_GOTO_ERR_RET(token, -1);
> >
> > /* Get device ID from parameter string */
> > eth_dev_id = strtoul(token, NULL, 10);
> > - RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(eth_dev_id, -EINVAL);
> > + RTE_ETH_VALID_PORTID_OR_GOTO_ERR_RET(eth_dev_id, -EINVAL);
> >
> > token = strtok(NULL, ",");
> > - if (token == NULL || strlen(token) == 0 || !isdigit(*token))
> > - return -1;
> > + RTE_EVENT_ETH_RX_ADAPTER_TOKEN_VALID_OR_GOTO_ERR_RET(token, -1);
> >
> > /* Get Rx queue ID from parameter string */
> > rx_queue_id = strtoul(token, NULL, 10);
> > if (rx_queue_id >= rte_eth_devices[eth_dev_id].data->nb_rx_queues) {
> > RTE_EDEV_LOG_ERR("Invalid rx queue_id %u", rx_queue_id);
> > - return -EINVAL;
> > + ret = -EINVAL;
> > + goto error;
> > }
> >
> > token = strtok(NULL, "\0");
> > if (token != NULL)
> > RTE_EDEV_LOG_ERR("Extra parameters passed to eventdev"
> > " telemetry command, ignoring");
> > + /* Parsing parameter finished */
> > + free(l_params);
> >
> > if (rte_event_eth_rx_adapter_queue_conf_get(rx_adapter_id, eth_dev_id,
> > rx_queue_id, &queue_conf)) {
> > @@ -3378,6 +3406,10 @@ handle_rxa_get_queue_conf(const char *cmd __rte_unused,
> > RXA_ADD_DICT(queue_conf.ev, flow_id);
> >
> > return 0;
> > +
> > +error:
> > + free(l_params);
> > + return ret;
> > }
> >
> > static int
> > @@ -3387,7 +3419,7 @@ handle_rxa_get_queue_stats(const char *cmd __rte_unused,
> > {
> > uint8_t rx_adapter_id;
> > uint16_t rx_queue_id;
> > - int eth_dev_id;
> > + int eth_dev_id, ret = -1;
> > char *token, *l_params;
> > struct rte_event_eth_rx_adapter_queue_stats q_stats;
> >
> > @@ -3396,33 +3428,37 @@ handle_rxa_get_queue_stats(const char *cmd __rte_unused,
> >
> > /* Get Rx adapter ID from parameter string */
> > l_params = strdup(params);
> > + if (l_params == NULL)
> > + return -ENOMEM;
> > token = strtok(l_params, ",");
> > + RTE_EVENT_ETH_RX_ADAPTER_TOKEN_VALID_OR_GOTO_ERR_RET(token, -1);
> > rx_adapter_id = strtoul(token, NULL, 10);
> > - RTE_EVENT_ETH_RX_ADAPTER_ID_VALID_OR_ERR_RET(rx_adapter_id, -EINVAL);
> > + RTE_EVENT_ETH_RX_ADAPTER_ID_VALID_OR_GOTO_ERR_RET(rx_adapter_id, -EINVAL);
> >
> > token = strtok(NULL, ",");
> > - if (token == NULL || strlen(token) == 0 || !isdigit(*token))
> > - return -1;
> > + RTE_EVENT_ETH_RX_ADAPTER_TOKEN_VALID_OR_GOTO_ERR_RET(token, -1);
> >
> > /* Get device ID from parameter string */
> > eth_dev_id = strtoul(token, NULL, 10);
> > - RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(eth_dev_id, -EINVAL);
> > + RTE_ETH_VALID_PORTID_OR_GOTO_ERR_RET(eth_dev_id, -EINVAL);
> >
> > token = strtok(NULL, ",");
> > - if (token == NULL || strlen(token) == 0 || !isdigit(*token))
> > - return -1;
> > + RTE_EVENT_ETH_RX_ADAPTER_TOKEN_VALID_OR_GOTO_ERR_RET(token, -1);
> >
> > /* Get Rx queue ID from parameter string */
> > rx_queue_id = strtoul(token, NULL, 10);
> > if (rx_queue_id >= rte_eth_devices[eth_dev_id].data->nb_rx_queues) {
> > RTE_EDEV_LOG_ERR("Invalid rx queue_id %u", rx_queue_id);
> > - return -EINVAL;
> > + ret = -EINVAL;
> > + goto error;
> > }
> >
> > token = strtok(NULL, "\0");
> > if (token != NULL)
> > RTE_EDEV_LOG_ERR("Extra parameters passed to eventdev"
> > " telemetry command, ignoring");
> > + /* Parsing parameter finished */
> > + free(l_params);
> >
> > if (rte_event_eth_rx_adapter_queue_stats_get(rx_adapter_id, eth_dev_id,
> > rx_queue_id, &q_stats)) {
> > @@ -3441,6 +3477,10 @@ handle_rxa_get_queue_stats(const char *cmd __rte_unused,
> > RXA_ADD_DICT(q_stats, rx_dropped);
> >
> > return 0;
> > +
> > +error:
> > + free(l_params);
> > + return ret;
> > }
> >
> > static int
> > @@ -3450,7 +3490,7 @@ handle_rxa_queue_stats_reset(const char *cmd __rte_unused,
> > {
> > uint8_t rx_adapter_id;
> > uint16_t rx_queue_id;
> > - int eth_dev_id;
> > + int eth_dev_id, ret = -1;
> > char *token, *l_params;
> >
> > if (params == NULL || strlen(params) == 0 || !isdigit(*params))
> > @@ -3458,33 +3498,37 @@ handle_rxa_queue_stats_reset(const char *cmd __rte_unused,
> >
> > /* Get Rx adapter ID from parameter string */
> > l_params = strdup(params);
> > + if (l_params == NULL)
> > + return -ENOMEM;
> > token = strtok(l_params, ",");
> > + RTE_EVENT_ETH_RX_ADAPTER_TOKEN_VALID_OR_GOTO_ERR_RET(token, -1);
> > rx_adapter_id = strtoul(token, NULL, 10);
> > - RTE_EVENT_ETH_RX_ADAPTER_ID_VALID_OR_ERR_RET(rx_adapter_id, -EINVAL);
> > + RTE_EVENT_ETH_RX_ADAPTER_ID_VALID_OR_GOTO_ERR_RET(rx_adapter_id, -EINVAL);
> >
> > token = strtok(NULL, ",");
> > - if (token == NULL || strlen(token) == 0 || !isdigit(*token))
> > - return -1;
> > + RTE_EVENT_ETH_RX_ADAPTER_TOKEN_VALID_OR_GOTO_ERR_RET(token, -1);
> >
> > /* Get device ID from parameter string */
> > eth_dev_id = strtoul(token, NULL, 10);
> > - RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(eth_dev_id, -EINVAL);
> > + RTE_ETH_VALID_PORTID_OR_GOTO_ERR_RET(eth_dev_id, -EINVAL);
> >
> > token = strtok(NULL, ",");
> > - if (token == NULL || strlen(token) == 0 || !isdigit(*token))
> > - return -1;
> > + RTE_EVENT_ETH_RX_ADAPTER_TOKEN_VALID_OR_GOTO_ERR_RET(token, -1);
> >
> > /* Get Rx queue ID from parameter string */
> > rx_queue_id = strtoul(token, NULL, 10);
> > if (rx_queue_id >= rte_eth_devices[eth_dev_id].data->nb_rx_queues) {
> > RTE_EDEV_LOG_ERR("Invalid rx queue_id %u", rx_queue_id);
> > - return -EINVAL;
> > + ret = -EINVAL;
> > + goto error;
> > }
> >
> > token = strtok(NULL, "\0");
> > if (token != NULL)
> > RTE_EDEV_LOG_ERR("Extra parameters passed to eventdev"
> > " telemetry command, ignoring");
> > + /* Parsing parameter finished */
> > + free(l_params);
> >
> > if (rte_event_eth_rx_adapter_queue_stats_reset(rx_adapter_id,
> > eth_dev_id,
> > @@ -3494,6 +3538,10 @@ handle_rxa_queue_stats_reset(const char *cmd __rte_unused,
> > }
> >
> > return 0;
> > +
> > +error:
> > + free(l_params);
> > + return ret;
> > }
> >
> > RTE_INIT(rxa_init_telemetry)
> > --
> > 2.25.1
>
next prev parent reply other threads:[~2022-02-18 9:39 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-02 7:13 [PATCH] " Weiguo Li
2022-02-02 7:40 ` [PATCH v2] " Weiguo Li
2022-02-02 7:48 ` Kundapura, Ganapati
2022-02-02 8:25 ` Jayatheerthan, Jay
2022-02-02 14:54 ` Kundapura, Ganapati
2022-02-02 16:47 ` Kundapura, Ganapati
2022-02-03 3:38 ` Weiguo Li
2022-02-03 5:44 ` Kundapura, Ganapati
2022-02-03 8:49 ` [PATCH v4] " Weiguo Li
2022-02-03 13:09 ` Kundapura, Ganapati
2022-02-04 6:54 ` Jayatheerthan, Jay
2022-02-04 7:49 ` [PATCH v5] " Weiguo Li
2022-02-04 7:57 ` Jayatheerthan, Jay
2022-02-04 8:21 ` [PATCH v6] " Weiguo Li
2022-02-04 9:47 ` Jayatheerthan, Jay
2022-02-18 9:39 ` Jerin Jacob [this message]
2022-02-22 10:08 ` Kevin Traynor
2022-02-23 7:21 ` Naga Harish K, S V
2022-02-03 6:02 ` [PATCH] " Stephen Hemminger
2022-02-03 7:18 ` [PATCH v3] " Weiguo Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CALBAE1O5ELPzwtKev3MhvFvmrnLcPiQ8MW8=cHa5x3EH4S4V5w@mail.gmail.com' \
--to=jerinjacobk@gmail.com \
--cc=dev@dpdk.org \
--cc=ganapati.kundapura@intel.com \
--cc=jay.jayatheerthan@intel.com \
--cc=liwg06@foxmail.com \
--cc=s.v.naga.harish.k@intel.com \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).