* [dpdk-dev] Testpmd fails in initialization
@ 2018-06-01 22:06 Monika Mails
2018-06-01 22:11 ` Stephen Hemminger
0 siblings, 1 reply; 5+ messages in thread
From: Monika Mails @ 2018-06-01 22:06 UTC (permalink / raw)
To: dev
Hi All,
This is Monika.
I am new to DPDK.
I just installed DPDK release - 18.05 on my server and trying to run
"testpmd"
Here is my command and its output :-
sudo testpmd -l 8 -n 4 -c 0x3 --socket-mem=512,512
EAL: Detected lcore 0 as core 3 on socket 0
EAL: Detected lcore 1 as core 3 on socket 1
EAL: Detected lcore 2 as core 4 on socket 0
EAL: Detected lcore 3 as core 4 on socket 1
EAL: Detected lcore 4 as core 5 on socket 0
EAL: Detected lcore 5 as core 5 on socket 1
EAL: Detected lcore 6 as core 6 on socket 0
EAL: Detected lcore 7 as core 6 on socket 1
EAL: Detected lcore 8 as core 10 on socket 0
EAL: Detected lcore 9 as core 10 on socket 1
EAL: Detected lcore 10 as core 11 on socket 0
EAL: Detected lcore 11 as core 11 on socket 1
EAL: Detected lcore 12 as core 3 on socket 0
EAL: Detected lcore 13 as core 3 on socket 1
EAL: Detected lcore 14 as core 4 on socket 0
EAL: Detected lcore 15 as core 4 on socket 1
EAL: Detected lcore 16 as core 5 on socket 0
EAL: Detected lcore 17 as core 5 on socket 1
EAL: Detected lcore 18 as core 6 on socket 0
EAL: Detected lcore 19 as core 6 on socket 1
EAL: Detected lcore 20 as core 10 on socket 0
EAL: Detected lcore 21 as core 10 on socket 1
EAL: Detected lcore 22 as core 11 on socket 0
EAL: Detected lcore 23 as core 11 on socket 1
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 24 lcore(s)
EAL: No free hugepages reported in hugepages-1048576kB
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d14600000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d14200000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d13e00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d13a00000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2d13400000 (size = 0x400000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d13000000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f2d12c00000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f2d12600000 (size = 0x400000)
*EAL: Not enough memory available on socket 0! Requested: 512MB, available:
0MB*
PANIC in rte_eal_init():
Cannot init memory
6: [testpmd(_start+0x29) [0x4155b9]]
5: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)
[0x7f2d158b5830]]
4: [testpmd(main+0x51) [0x414fb1]]
3: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(rte_eal_init+0x1111)
[0x7f2d16e59c91]]
2: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(__rte_panic+0xd0)
[0x7f2d16e38e18]]
1: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(rte_dump_stack+0x2b)
[0x7f2d16fa840b]]
Aborted (core dumped)
Here are the other details of my server :-
*./deps/dpdk-18.05/usertools/cpu_layout.py*
======================================================================
Core and Socket Information (as reported by '/sys/devices/system/cpu')
======================================================================
cores = [3, 4, 5, 6, 10, 11]
sockets = [0, 1]
Socket 0 Socket 1
-------- --------
Core 3 [0, 12] [1, 13]
Core 4 [2, 14] [3, 15]
Core 5 [4, 16] [5, 17]
Core 6 [6, 18] [7, 19]
Core 10 [8, 20] [9, 21]
Core 11 [10, 22] [11, 23]
I tried selecting different number of hugepages from 1024-10, but getting
the same initialization error.
Can someone please suggest some resolution.
Appreciate some advice.
Regards,
Monika
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-dev] Testpmd fails in initialization
2018-06-01 22:06 [dpdk-dev] Testpmd fails in initialization Monika Mails
@ 2018-06-01 22:11 ` Stephen Hemminger
2018-06-01 22:17 ` Monika Mails
0 siblings, 1 reply; 5+ messages in thread
From: Stephen Hemminger @ 2018-06-01 22:11 UTC (permalink / raw)
To: Monika Mails; +Cc: dev
How much huge page memory did you confirm?
$ cat /proc/meminfo
On Fri, Jun 1, 2018, 3:06 PM Monika Mails <mails.monika@gmail.com> wrote:
> Hi All,
>
> This is Monika.
> I am new to DPDK.
> I just installed DPDK release - 18.05 on my server and trying to run
> "testpmd"
>
> Here is my command and its output :-
>
> sudo testpmd -l 8 -n 4 -c 0x3 --socket-mem=512,512
>
> EAL: Detected lcore 0 as core 3 on socket 0
> EAL: Detected lcore 1 as core 3 on socket 1
> EAL: Detected lcore 2 as core 4 on socket 0
> EAL: Detected lcore 3 as core 4 on socket 1
> EAL: Detected lcore 4 as core 5 on socket 0
> EAL: Detected lcore 5 as core 5 on socket 1
> EAL: Detected lcore 6 as core 6 on socket 0
> EAL: Detected lcore 7 as core 6 on socket 1
> EAL: Detected lcore 8 as core 10 on socket 0
> EAL: Detected lcore 9 as core 10 on socket 1
> EAL: Detected lcore 10 as core 11 on socket 0
> EAL: Detected lcore 11 as core 11 on socket 1
> EAL: Detected lcore 12 as core 3 on socket 0
> EAL: Detected lcore 13 as core 3 on socket 1
> EAL: Detected lcore 14 as core 4 on socket 0
> EAL: Detected lcore 15 as core 4 on socket 1
> EAL: Detected lcore 16 as core 5 on socket 0
> EAL: Detected lcore 17 as core 5 on socket 1
> EAL: Detected lcore 18 as core 6 on socket 0
> EAL: Detected lcore 19 as core 6 on socket 1
> EAL: Detected lcore 20 as core 10 on socket 0
> EAL: Detected lcore 21 as core 10 on socket 1
> EAL: Detected lcore 22 as core 11 on socket 0
> EAL: Detected lcore 23 as core 11 on socket 1
> EAL: Support maximum 128 logical core(s) by configuration.
> EAL: Detected 24 lcore(s)
> EAL: No free hugepages reported in hugepages-1048576kB
> EAL: Setting up physically contiguous memory...
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7f2d14600000 (size = 0x200000)
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7f2d14200000 (size = 0x200000)
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7f2d13e00000 (size = 0x200000)
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7f2d13a00000 (size = 0x200000)
> EAL: Ask a virtual area of 0x400000 bytes
> EAL: Virtual area found at 0x7f2d13400000 (size = 0x400000)
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7f2d13000000 (size = 0x200000)
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7f2d12c00000 (size = 0x200000)
> EAL: Ask a virtual area of 0x400000 bytes
> EAL: Virtual area found at 0x7f2d12600000 (size = 0x400000)
> *EAL: Not enough memory available on socket 0! Requested: 512MB, available:
> 0MB*
> PANIC in rte_eal_init():
> Cannot init memory
> 6: [testpmd(_start+0x29) [0x4155b9]]
> 5: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)
> [0x7f2d158b5830]]
> 4: [testpmd(main+0x51) [0x414fb1]]
> 3: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(rte_eal_init+0x1111)
> [0x7f2d16e59c91]]
> 2: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(__rte_panic+0xd0)
> [0x7f2d16e38e18]]
> 1: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(rte_dump_stack+0x2b)
> [0x7f2d16fa840b]]
> Aborted (core dumped)
>
> Here are the other details of my server :-
>
> *./deps/dpdk-18.05/usertools/cpu_layout.py*
> ======================================================================
> Core and Socket Information (as reported by '/sys/devices/system/cpu')
> ======================================================================
>
> cores = [3, 4, 5, 6, 10, 11]
> sockets = [0, 1]
>
> Socket 0 Socket 1
> -------- --------
> Core 3 [0, 12] [1, 13]
> Core 4 [2, 14] [3, 15]
> Core 5 [4, 16] [5, 17]
> Core 6 [6, 18] [7, 19]
> Core 10 [8, 20] [9, 21]
> Core 11 [10, 22] [11, 23]
>
> I tried selecting different number of hugepages from 1024-10, but getting
> the same initialization error.
> Can someone please suggest some resolution.
> Appreciate some advice.
>
> Regards,
> Monika
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-dev] Testpmd fails in initialization
2018-06-01 22:11 ` Stephen Hemminger
@ 2018-06-01 22:17 ` Monika Mails
2018-06-01 22:25 ` Monika Mails
2018-06-02 3:16 ` Rosen, Rami
0 siblings, 2 replies; 5+ messages in thread
From: Monika Mails @ 2018-06-01 22:17 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: dev
Hi Stephen
For last command I just declared 10 hugepages.
Regards,
Monika
On Fri, Jun 1, 2018 at 3:11 PM, Stephen Hemminger <
stephen@networkplumber.org> wrote:
> How much huge page memory did you confirm?
> $ cat /proc/meminfo
>
> On Fri, Jun 1, 2018, 3:06 PM Monika Mails <mails.monika@gmail.com> wrote:
>
>> Hi All,
>>
>> This is Monika.
>> I am new to DPDK.
>> I just installed DPDK release - 18.05 on my server and trying to run
>> "testpmd"
>>
>> Here is my command and its output :-
>>
>> sudo testpmd -l 8 -n 4 -c 0x3 --socket-mem=512,512
>>
>> EAL: Detected lcore 0 as core 3 on socket 0
>> EAL: Detected lcore 1 as core 3 on socket 1
>> EAL: Detected lcore 2 as core 4 on socket 0
>> EAL: Detected lcore 3 as core 4 on socket 1
>> EAL: Detected lcore 4 as core 5 on socket 0
>> EAL: Detected lcore 5 as core 5 on socket 1
>> EAL: Detected lcore 6 as core 6 on socket 0
>> EAL: Detected lcore 7 as core 6 on socket 1
>> EAL: Detected lcore 8 as core 10 on socket 0
>> EAL: Detected lcore 9 as core 10 on socket 1
>> EAL: Detected lcore 10 as core 11 on socket 0
>> EAL: Detected lcore 11 as core 11 on socket 1
>> EAL: Detected lcore 12 as core 3 on socket 0
>> EAL: Detected lcore 13 as core 3 on socket 1
>> EAL: Detected lcore 14 as core 4 on socket 0
>> EAL: Detected lcore 15 as core 4 on socket 1
>> EAL: Detected lcore 16 as core 5 on socket 0
>> EAL: Detected lcore 17 as core 5 on socket 1
>> EAL: Detected lcore 18 as core 6 on socket 0
>> EAL: Detected lcore 19 as core 6 on socket 1
>> EAL: Detected lcore 20 as core 10 on socket 0
>> EAL: Detected lcore 21 as core 10 on socket 1
>> EAL: Detected lcore 22 as core 11 on socket 0
>> EAL: Detected lcore 23 as core 11 on socket 1
>> EAL: Support maximum 128 logical core(s) by configuration.
>> EAL: Detected 24 lcore(s)
>> EAL: No free hugepages reported in hugepages-1048576kB
>> EAL: Setting up physically contiguous memory...
>> EAL: Ask a virtual area of 0x200000 bytes
>> EAL: Virtual area found at 0x7f2d14600000 (size = 0x200000)
>> EAL: Ask a virtual area of 0x200000 bytes
>> EAL: Virtual area found at 0x7f2d14200000 (size = 0x200000)
>> EAL: Ask a virtual area of 0x200000 bytes
>> EAL: Virtual area found at 0x7f2d13e00000 (size = 0x200000)
>> EAL: Ask a virtual area of 0x200000 bytes
>> EAL: Virtual area found at 0x7f2d13a00000 (size = 0x200000)
>> EAL: Ask a virtual area of 0x400000 bytes
>> EAL: Virtual area found at 0x7f2d13400000 (size = 0x400000)
>> EAL: Ask a virtual area of 0x200000 bytes
>> EAL: Virtual area found at 0x7f2d13000000 (size = 0x200000)
>> EAL: Ask a virtual area of 0x200000 bytes
>> EAL: Virtual area found at 0x7f2d12c00000 (size = 0x200000)
>> EAL: Ask a virtual area of 0x400000 bytes
>> EAL: Virtual area found at 0x7f2d12600000 (size = 0x400000)
>> *EAL: Not enough memory available on socket 0! Requested: 512MB,
>> available:
>> 0MB*
>> PANIC in rte_eal_init():
>> Cannot init memory
>> 6: [testpmd(_start+0x29) [0x4155b9]]
>> 5: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)
>> [0x7f2d158b5830]]
>> 4: [testpmd(main+0x51) [0x414fb1]]
>> 3: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(rte_eal_init+0x1111)
>> [0x7f2d16e59c91]]
>> 2: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(__rte_panic+0xd0)
>> [0x7f2d16e38e18]]
>> 1: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(rte_dump_stack+0x2b)
>> [0x7f2d16fa840b]]
>> Aborted (core dumped)
>>
>> Here are the other details of my server :-
>>
>> *./deps/dpdk-18.05/usertools/cpu_layout.py*
>> ======================================================================
>> Core and Socket Information (as reported by '/sys/devices/system/cpu')
>> ======================================================================
>>
>> cores = [3, 4, 5, 6, 10, 11]
>> sockets = [0, 1]
>>
>> Socket 0 Socket 1
>> -------- --------
>> Core 3 [0, 12] [1, 13]
>> Core 4 [2, 14] [3, 15]
>> Core 5 [4, 16] [5, 17]
>> Core 6 [6, 18] [7, 19]
>> Core 10 [8, 20] [9, 21]
>> Core 11 [10, 22] [11, 23]
>>
>> I tried selecting different number of hugepages from 1024-10, but getting
>> the same initialization error.
>> Can someone please suggest some resolution.
>> Appreciate some advice.
>>
>> Regards,
>> Monika
>>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-dev] Testpmd fails in initialization
2018-06-01 22:17 ` Monika Mails
@ 2018-06-01 22:25 ` Monika Mails
2018-06-02 3:16 ` Rosen, Rami
1 sibling, 0 replies; 5+ messages in thread
From: Monika Mails @ 2018-06-01 22:25 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: dev
Hi Stephen,
if I don't give the last option for socket memory then also it fails.
Here is the error log :-
*sudo testpmd -l 8 -n 4 -c 0x3 *
EAL: Detected lcore 0 as core 3 on socket 0
EAL: Detected lcore 1 as core 3 on socket 1
EAL: Detected lcore 2 as core 4 on socket 0
EAL: Detected lcore 3 as core 4 on socket 1
EAL: Detected lcore 4 as core 5 on socket 0
EAL: Detected lcore 5 as core 5 on socket 1
EAL: Detected lcore 6 as core 6 on socket 0
EAL: Detected lcore 7 as core 6 on socket 1
EAL: Detected lcore 8 as core 10 on socket 0
EAL: Detected lcore 9 as core 10 on socket 1
EAL: Detected lcore 10 as core 11 on socket 0
EAL: Detected lcore 11 as core 11 on socket 1
EAL: Detected lcore 12 as core 3 on socket 0
EAL: Detected lcore 13 as core 3 on socket 1
EAL: Detected lcore 14 as core 4 on socket 0
EAL: Detected lcore 15 as core 4 on socket 1
EAL: Detected lcore 16 as core 5 on socket 0
EAL: Detected lcore 17 as core 5 on socket 1
EAL: Detected lcore 18 as core 6 on socket 0
EAL: Detected lcore 19 as core 6 on socket 1
EAL: Detected lcore 20 as core 10 on socket 0
EAL: Detected lcore 21 as core 10 on socket 1
EAL: Detected lcore 22 as core 11 on socket 0
EAL: Detected lcore 23 as core 11 on socket 1
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 24 lcore(s)
EAL: No free hugepages reported in hugepages-1048576kB
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f882aa00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f882a600000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f882a200000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f8829e00000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f8829800000 (size = 0x400000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f8829400000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f8829000000 (size = 0x200000)
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7f8828a00000 (size = 0x400000)
*EAL: Requesting 10 pages of size 2MB from socket 1*
EAL: TSC frequency is ~3399997 KHz
EAL: WARNING: Master core has no memory on local socket!
EAL: Master lcore 0 is ready (tid=2de3d8c0;cpuset=[0])
EAL: lcore 1 is ready (tid=289ff700;cpuset=[1])
EAL: PCI device 0000:01:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
EAL: PCI memory mapped at 0x7f882ac00000
EAL: PCI memory mapped at 0x7f882ac80000
*PANIC in rte_eth_dev_data_alloc():Cannot allocate memzone for ethernet
port data*
10: [testpmd(_start+0x29) [0x4155b9]]
9: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)
[0x7f882c1ed830]]
8: [testpmd(main+0x51) [0x414fb1]]
7: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(rte_eal_init+0xb8b)
[0x7f882d79170b]]
6: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(rte_eal_pci_probe+0xc5)
[0x7f882d8a8d25]]
5: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(+0x1547f1) [0x7f882d8a87f1]]
4: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(+0x14c226) [0x7f882d8a0226]]
3: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(+0x14c09c) [0x7f882d8a009c]]
2: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(__rte_panic+0xd0)
[0x7f882d770e18]]
1: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(rte_dump_stack+0x2b)
[0x7f882d8e040b]]
Aborted (core dumped)
Regards,
Monika
On Fri, Jun 1, 2018 at 3:17 PM, Monika Mails <mails.monika@gmail.com> wrote:
> Hi Stephen
>
> For last command I just declared 10 hugepages.
>
> Regards,
> Monika
>
> On Fri, Jun 1, 2018 at 3:11 PM, Stephen Hemminger <
> stephen@networkplumber.org> wrote:
>
>> How much huge page memory did you confirm?
>> $ cat /proc/meminfo
>>
>> On Fri, Jun 1, 2018, 3:06 PM Monika Mails <mails.monika@gmail.com> wrote:
>>
>>> Hi All,
>>>
>>> This is Monika.
>>> I am new to DPDK.
>>> I just installed DPDK release - 18.05 on my server and trying to run
>>> "testpmd"
>>>
>>> Here is my command and its output :-
>>>
>>> sudo testpmd -l 8 -n 4 -c 0x3 --socket-mem=512,512
>>>
>>> EAL: Detected lcore 0 as core 3 on socket 0
>>> EAL: Detected lcore 1 as core 3 on socket 1
>>> EAL: Detected lcore 2 as core 4 on socket 0
>>> EAL: Detected lcore 3 as core 4 on socket 1
>>> EAL: Detected lcore 4 as core 5 on socket 0
>>> EAL: Detected lcore 5 as core 5 on socket 1
>>> EAL: Detected lcore 6 as core 6 on socket 0
>>> EAL: Detected lcore 7 as core 6 on socket 1
>>> EAL: Detected lcore 8 as core 10 on socket 0
>>> EAL: Detected lcore 9 as core 10 on socket 1
>>> EAL: Detected lcore 10 as core 11 on socket 0
>>> EAL: Detected lcore 11 as core 11 on socket 1
>>> EAL: Detected lcore 12 as core 3 on socket 0
>>> EAL: Detected lcore 13 as core 3 on socket 1
>>> EAL: Detected lcore 14 as core 4 on socket 0
>>> EAL: Detected lcore 15 as core 4 on socket 1
>>> EAL: Detected lcore 16 as core 5 on socket 0
>>> EAL: Detected lcore 17 as core 5 on socket 1
>>> EAL: Detected lcore 18 as core 6 on socket 0
>>> EAL: Detected lcore 19 as core 6 on socket 1
>>> EAL: Detected lcore 20 as core 10 on socket 0
>>> EAL: Detected lcore 21 as core 10 on socket 1
>>> EAL: Detected lcore 22 as core 11 on socket 0
>>> EAL: Detected lcore 23 as core 11 on socket 1
>>> EAL: Support maximum 128 logical core(s) by configuration.
>>> EAL: Detected 24 lcore(s)
>>> EAL: No free hugepages reported in hugepages-1048576kB
>>> EAL: Setting up physically contiguous memory...
>>> EAL: Ask a virtual area of 0x200000 bytes
>>> EAL: Virtual area found at 0x7f2d14600000 (size = 0x200000)
>>> EAL: Ask a virtual area of 0x200000 bytes
>>> EAL: Virtual area found at 0x7f2d14200000 (size = 0x200000)
>>> EAL: Ask a virtual area of 0x200000 bytes
>>> EAL: Virtual area found at 0x7f2d13e00000 (size = 0x200000)
>>> EAL: Ask a virtual area of 0x200000 bytes
>>> EAL: Virtual area found at 0x7f2d13a00000 (size = 0x200000)
>>> EAL: Ask a virtual area of 0x400000 bytes
>>> EAL: Virtual area found at 0x7f2d13400000 (size = 0x400000)
>>> EAL: Ask a virtual area of 0x200000 bytes
>>> EAL: Virtual area found at 0x7f2d13000000 (size = 0x200000)
>>> EAL: Ask a virtual area of 0x200000 bytes
>>> EAL: Virtual area found at 0x7f2d12c00000 (size = 0x200000)
>>> EAL: Ask a virtual area of 0x400000 bytes
>>> EAL: Virtual area found at 0x7f2d12600000 (size = 0x400000)
>>> *EAL: Not enough memory available on socket 0! Requested: 512MB,
>>> available:
>>> 0MB*
>>> PANIC in rte_eal_init():
>>> Cannot init memory
>>> 6: [testpmd(_start+0x29) [0x4155b9]]
>>> 5: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)
>>> [0x7f2d158b5830]]
>>> 4: [testpmd(main+0x51) [0x414fb1]]
>>> 3: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(rte_eal_init+0x1111)
>>> [0x7f2d16e59c91]]
>>> 2: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(__rte_panic+0xd0)
>>> [0x7f2d16e38e18]]
>>> 1: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(rte_dump_stack+0x2b)
>>> [0x7f2d16fa840b]]
>>> Aborted (core dumped)
>>>
>>> Here are the other details of my server :-
>>>
>>> *./deps/dpdk-18.05/usertools/cpu_layout.py*
>>> ======================================================================
>>> Core and Socket Information (as reported by '/sys/devices/system/cpu')
>>> ======================================================================
>>>
>>> cores = [3, 4, 5, 6, 10, 11]
>>> sockets = [0, 1]
>>>
>>> Socket 0 Socket 1
>>> -------- --------
>>> Core 3 [0, 12] [1, 13]
>>> Core 4 [2, 14] [3, 15]
>>> Core 5 [4, 16] [5, 17]
>>> Core 6 [6, 18] [7, 19]
>>> Core 10 [8, 20] [9, 21]
>>> Core 11 [10, 22] [11, 23]
>>>
>>> I tried selecting different number of hugepages from 1024-10, but getting
>>> the same initialization error.
>>> Can someone please suggest some resolution.
>>> Appreciate some advice.
>>>
>>> Regards,
>>> Monika
>>>
>>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-dev] Testpmd fails in initialization
2018-06-01 22:17 ` Monika Mails
2018-06-01 22:25 ` Monika Mails
@ 2018-06-02 3:16 ` Rosen, Rami
1 sibling, 0 replies; 5+ messages in thread
From: Rosen, Rami @ 2018-06-02 3:16 UTC (permalink / raw)
To: Monika Mails, Stephen Hemminger; +Cc: dev
Hi Monika,
> For last command I just declared 10 hugepages.
This is not enough.
I would suggest that you will try with 256 pages.
I assume you have 2 sockets on the host (this can be verified by running "lspcu") and use 2MB hugepages.
So, this can be done by:
echo 256 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
and
echo 256 > /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
And run the same command that you used to launch testpmd.
(And if testpmd will still fail, please post the output of
cat /proc/meminfo | grep -i huge)
Also for the future, this type of queries should be posted on dpdk-users mailing list.
Regards,
Rami Rosen
-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Monika Mails
Sent: Saturday, June 02, 2018 01:18
To: Stephen Hemminger <stephen@networkplumber.org>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] Testpmd fails in initialization
Hi Stephen
For last command I just declared 10 hugepages.
Regards,
Monika
On Fri, Jun 1, 2018 at 3:11 PM, Stephen Hemminger < stephen@networkplumber.org> wrote:
> How much huge page memory did you confirm?
> $ cat /proc/meminfo
>
> On Fri, Jun 1, 2018, 3:06 PM Monika Mails <mails.monika@gmail.com> wrote:
>
>> Hi All,
>>
>> This is Monika.
>> I am new to DPDK.
>> I just installed DPDK release - 18.05 on my server and trying to run
>> "testpmd"
>>
>> Here is my command and its output :-
>>
>> sudo testpmd -l 8 -n 4 -c 0x3 --socket-mem=512,512
>>
>> EAL: Detected lcore 0 as core 3 on socket 0
>> EAL: Detected lcore 1 as core 3 on socket 1
>> EAL: Detected lcore 2 as core 4 on socket 0
>> EAL: Detected lcore 3 as core 4 on socket 1
>> EAL: Detected lcore 4 as core 5 on socket 0
>> EAL: Detected lcore 5 as core 5 on socket 1
>> EAL: Detected lcore 6 as core 6 on socket 0
>> EAL: Detected lcore 7 as core 6 on socket 1
>> EAL: Detected lcore 8 as core 10 on socket 0
>> EAL: Detected lcore 9 as core 10 on socket 1
>> EAL: Detected lcore 10 as core 11 on socket 0
>> EAL: Detected lcore 11 as core 11 on socket 1
>> EAL: Detected lcore 12 as core 3 on socket 0
>> EAL: Detected lcore 13 as core 3 on socket 1
>> EAL: Detected lcore 14 as core 4 on socket 0
>> EAL: Detected lcore 15 as core 4 on socket 1
>> EAL: Detected lcore 16 as core 5 on socket 0
>> EAL: Detected lcore 17 as core 5 on socket 1
>> EAL: Detected lcore 18 as core 6 on socket 0
>> EAL: Detected lcore 19 as core 6 on socket 1
>> EAL: Detected lcore 20 as core 10 on socket 0
>> EAL: Detected lcore 21 as core 10 on socket 1
>> EAL: Detected lcore 22 as core 11 on socket 0
>> EAL: Detected lcore 23 as core 11 on socket 1
>> EAL: Support maximum 128 logical core(s) by configuration.
>> EAL: Detected 24 lcore(s)
>> EAL: No free hugepages reported in hugepages-1048576kB
>> EAL: Setting up physically contiguous memory...
>> EAL: Ask a virtual area of 0x200000 bytes
>> EAL: Virtual area found at 0x7f2d14600000 (size = 0x200000)
>> EAL: Ask a virtual area of 0x200000 bytes
>> EAL: Virtual area found at 0x7f2d14200000 (size = 0x200000)
>> EAL: Ask a virtual area of 0x200000 bytes
>> EAL: Virtual area found at 0x7f2d13e00000 (size = 0x200000)
>> EAL: Ask a virtual area of 0x200000 bytes
>> EAL: Virtual area found at 0x7f2d13a00000 (size = 0x200000)
>> EAL: Ask a virtual area of 0x400000 bytes
>> EAL: Virtual area found at 0x7f2d13400000 (size = 0x400000)
>> EAL: Ask a virtual area of 0x200000 bytes
>> EAL: Virtual area found at 0x7f2d13000000 (size = 0x200000)
>> EAL: Ask a virtual area of 0x200000 bytes
>> EAL: Virtual area found at 0x7f2d12c00000 (size = 0x200000)
>> EAL: Ask a virtual area of 0x400000 bytes
>> EAL: Virtual area found at 0x7f2d12600000 (size = 0x400000)
>> *EAL: Not enough memory available on socket 0! Requested: 512MB,
>> available:
>> 0MB*
>> PANIC in rte_eal_init():
>> Cannot init memory
>> 6: [testpmd(_start+0x29) [0x4155b9]]
>> 5: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)
>> [0x7f2d158b5830]]
>> 4: [testpmd(main+0x51) [0x414fb1]]
>> 3: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(rte_eal_init+0x1111)
>> [0x7f2d16e59c91]]
>> 2: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(__rte_panic+0xd0)
>> [0x7f2d16e38e18]]
>> 1: [/usr/lib/x86_64-linux-gnu/libdpdk.so.0(rte_dump_stack+0x2b)
>> [0x7f2d16fa840b]]
>> Aborted (core dumped)
>>
>> Here are the other details of my server :-
>>
>> *./deps/dpdk-18.05/usertools/cpu_layout.py*
>> =====================================================================
>> = Core and Socket Information (as reported by
>> '/sys/devices/system/cpu')
>> =====================================================================
>> =
>>
>> cores = [3, 4, 5, 6, 10, 11]
>> sockets = [0, 1]
>>
>> Socket 0 Socket 1
>> -------- --------
>> Core 3 [0, 12] [1, 13]
>> Core 4 [2, 14] [3, 15]
>> Core 5 [4, 16] [5, 17]
>> Core 6 [6, 18] [7, 19]
>> Core 10 [8, 20] [9, 21]
>> Core 11 [10, 22] [11, 23]
>>
>> I tried selecting different number of hugepages from 1024-10, but
>> getting the same initialization error.
>> Can someone please suggest some resolution.
>> Appreciate some advice.
>>
>> Regards,
>> Monika
>>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-06-02 3:16 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-01 22:06 [dpdk-dev] Testpmd fails in initialization Monika Mails
2018-06-01 22:11 ` Stephen Hemminger
2018-06-01 22:17 ` Monika Mails
2018-06-01 22:25 ` Monika Mails
2018-06-02 3:16 ` Rosen, Rami
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).