From: David Marchand <david.marchand@6wind.com>
To: Tetsuya Mukawa <mukawa@igel.co.jp>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v8 12/12] eal: Consolidate rte_eal_pci_probe/close_one_driver() of linuxapp and bsdapp
Date: Tue, 7 Jul 2015 10:07:48 +0200 [thread overview]
Message-ID: <CALwxeUuRAD92dkRLhRajDQB19wv32-XNNs-mwr1v0hkv2wtD3g@mail.gmail.com> (raw)
In-Reply-To: <1436163861-3025-13-git-send-email-mukawa@igel.co.jp>
On Mon, Jul 6, 2015 at 8:24 AM, Tetsuya Mukawa <mukawa@igel.co.jp> wrote:
> From: "Tetsuya.Mukawa" <mukawa@igel.co.jp>
>
> This patch consolidates below functions, and implements these in common
> eal code.
> - rte_eal_pci_probe_one_driver()
> - rte_eal_pci_close_one_driver()
>
> Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
> ---
> lib/librte_eal/bsdapp/eal/eal_pci.c | 67 +--------------
> lib/librte_eal/common/eal_common_pci.c | 133
> +++++++++++++++++++++++++++++-
> lib/librte_eal/common/eal_private.h | 39 +--------
> lib/librte_eal/linuxapp/eal/eal_pci.c | 143
> +--------------------------------
> 4 files changed, 136 insertions(+), 246 deletions(-)
>
> diff --git a/lib/librte_eal/bsdapp/eal/eal_pci.c
> b/lib/librte_eal/bsdapp/eal/eal_pci.c
> index a27dca3..b7c34f4 100644
> --- a/lib/librte_eal/bsdapp/eal/eal_pci.c
> +++ b/lib/librte_eal/bsdapp/eal/eal_pci.c
> @@ -85,7 +85,7 @@
> */
>
> /* unbind kernel driver for this device */
> -static int
> +int
> pci_unbind_kernel_driver(struct rte_pci_device *dev __rte_unused)
> {
> RTE_LOG(ERR, EAL, "RTE_PCI_DRV_FORCE_UNBIND flag is not
> implemented "
> @@ -357,71 +357,6 @@ error:
> return -1;
> }
>
> -/*
> - * If vendor/device ID match, call the devinit() function of the
> - * driver.
> - */
> -int
> -rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct
> rte_pci_device *dev)
> -{
> - const struct rte_pci_id *id_table;
> - int ret;
> -
> - for (id_table = dr->id_table ; id_table->vendor_id != 0;
> id_table++) {
> -
> - /* check if device's identifiers match the driver's ones */
> - if (id_table->vendor_id != dev->id.vendor_id &&
> - id_table->vendor_id != PCI_ANY_ID)
> - continue;
> - if (id_table->device_id != dev->id.device_id &&
> - id_table->device_id != PCI_ANY_ID)
> - continue;
> - if (id_table->subsystem_vendor_id !=
> dev->id.subsystem_vendor_id &&
> - id_table->subsystem_vendor_id !=
> PCI_ANY_ID)
> - continue;
> - if (id_table->subsystem_device_id !=
> dev->id.subsystem_device_id &&
> - id_table->subsystem_device_id !=
> PCI_ANY_ID)
> - continue;
> -
> - struct rte_pci_addr *loc = &dev->addr;
> -
> - RTE_LOG(DEBUG, EAL, "PCI device "PCI_PRI_FMT" on NUMA
> socket %i\n",
> - loc->domain, loc->bus, loc->devid,
> loc->function,
> - dev->numa_node);
> -
> - RTE_LOG(DEBUG, EAL, " probe driver: %x:%x %s\n",
> dev->id.vendor_id,
> - dev->id.device_id, dr->name);
> -
> - /* no initialization when blacklisted, return without
> error */
> - if (dev->devargs != NULL &&
> - dev->devargs->type == RTE_DEVTYPE_BLACKLISTED_PCI)
> {
> -
> - RTE_LOG(DEBUG, EAL, " Device is blacklisted, not
> initializing\n");
> - return 0;
> - }
> -
> - if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) {
> - /* map resources for devices that use igb_uio */
> - ret = pci_uio_map_resource(dev);
> - if (ret != 0)
> - return ret;
> - } else if (dr->drv_flags & RTE_PCI_DRV_FORCE_UNBIND &&
> - rte_eal_process_type() == RTE_PROC_PRIMARY) {
> - /* unbind current driver */
> - if (pci_unbind_kernel_driver(dev) < 0)
> - return -1;
> - }
> -
> - /* reference driver structure */
> - dev->driver = dr;
> -
> - /* call the driver devinit() function */
> - return dr->devinit(dr, dev);
> - }
> - /* return positive value if driver is not found */
> - return 1;
> -}
> -
> /* Init the PCI EAL subsystem */
> int
> rte_eal_pci_init(void)
> diff --git a/lib/librte_eal/common/eal_common_pci.c
> b/lib/librte_eal/common/eal_common_pci.c
> index afd14ec..031c7a7 100644
> --- a/lib/librte_eal/common/eal_common_pci.c
> +++ b/lib/librte_eal/common/eal_common_pci.c
> @@ -139,7 +139,7 @@ pci_unmap_resource(void *requested_addr, size_t size)
> }
>
> /* Map pci device */
> -int
> +static int
> pci_map_device(struct rte_pci_device *dev)
> {
> int ret = -1;
> @@ -170,7 +170,7 @@ pci_map_device(struct rte_pci_device *dev)
>
> #ifdef RTE_LIBRTE_EAL_HOTPLUG
> /* Unmap pci device */
> -void
> +static void
> pci_unmap_device(struct rte_pci_device *dev)
> {
> if (dev == NULL)
> @@ -196,6 +196,135 @@ pci_unmap_device(struct rte_pci_device *dev)
> #endif /* RTE_LIBRTE_EAL_HOTPLUG */
>
> /*
> + * If vendor/device ID match, call the devinit() function of the
> + * driver.
> + */
> +static int
> +rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct
> rte_pci_device *dev)
> +{
> + int ret;
> + const struct rte_pci_id *id_table;
> +
> + for (id_table = dr->id_table; id_table->vendor_id != 0;
> id_table++) {
> +
> + /* check if device's identifiers match the driver's ones */
> + if (id_table->vendor_id != dev->id.vendor_id &&
> + id_table->vendor_id != PCI_ANY_ID)
> + continue;
> + if (id_table->device_id != dev->id.device_id &&
> + id_table->device_id != PCI_ANY_ID)
> + continue;
> + if (id_table->subsystem_vendor_id !=
> dev->id.subsystem_vendor_id &&
> + id_table->subsystem_vendor_id !=
> PCI_ANY_ID)
> + continue;
> + if (id_table->subsystem_device_id !=
> dev->id.subsystem_device_id &&
> + id_table->subsystem_device_id !=
> PCI_ANY_ID)
> + continue;
> +
> + struct rte_pci_addr *loc = &dev->addr;
> +
> + RTE_LOG(DEBUG, EAL, "PCI device "PCI_PRI_FMT" on NUMA
> socket %i\n",
> + loc->domain, loc->bus, loc->devid,
> loc->function,
> + dev->numa_node);
> +
> + RTE_LOG(DEBUG, EAL, " probe driver: %x:%x %s\n",
> dev->id.vendor_id,
> + dev->id.device_id, dr->name);
> +
> + /* no initialization when blacklisted, return without
> error */
> + if (dev->devargs != NULL &&
> + dev->devargs->type == RTE_DEVTYPE_BLACKLISTED_PCI)
> {
> + RTE_LOG(DEBUG, EAL, " Device is blacklisted, not
> initializing\n");
> + return 1;
> + }
> +
> + if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) {
> +#ifdef RTE_PCI_CONFIG
> + /*
> + * Set PCIe config space for high performance.
> + * Return value can be ignored.
> + */
> + pci_config_space_set(dev);
> +#endif
> + /* map resources for devices that use igb_uio */
> + ret = pci_map_device(dev);
> + if (ret != 0)
> + return ret;
> + } else if (dr->drv_flags & RTE_PCI_DRV_FORCE_UNBIND &&
> + rte_eal_process_type() ==
> RTE_PROC_PRIMARY) {
> + /* unbind current driver */
> + if (pci_unbind_kernel_driver(dev) < 0)
> + return -1;
> + }
> +
> + /* reference driver structure */
> + dev->driver = dr;
> +
> + /* call the driver devinit() function */
> + return dr->devinit(dr, dev);
> + }
> + /* return positive value if driver is not found */
> + return 1;
> +}
> +
> +#ifdef RTE_LIBRTE_EAL_HOTPLUG
> +/*
> + * If vendor/device ID match, call the devuninit() function of the
> + * driver.
> + */
> +static int
> +rte_eal_pci_close_one_driver(struct rte_pci_driver *dr,
> + struct rte_pci_device *dev)
> +{
> + const struct rte_pci_id *id_table;
> +
> + if ((dr == NULL) || (dev == NULL))
> + return -EINVAL;
> +
> + for (id_table = dr->id_table; id_table->vendor_id != 0;
> id_table++) {
> +
> + /* check if device's identifiers match the driver's ones */
> + if (id_table->vendor_id != dev->id.vendor_id &&
> + id_table->vendor_id != PCI_ANY_ID)
> + continue;
> + if (id_table->device_id != dev->id.device_id &&
> + id_table->device_id != PCI_ANY_ID)
> + continue;
> + if (id_table->subsystem_vendor_id !=
> dev->id.subsystem_vendor_id &&
> + id_table->subsystem_vendor_id !=
> PCI_ANY_ID)
> + continue;
> + if (id_table->subsystem_device_id !=
> dev->id.subsystem_device_id &&
> + id_table->subsystem_device_id !=
> PCI_ANY_ID)
> + continue;
> +
> + struct rte_pci_addr *loc = &dev->addr;
> +
> + RTE_LOG(DEBUG, EAL, "PCI device "PCI_PRI_FMT" on NUMA
> socket %i\n",
> + loc->domain, loc->bus, loc->devid,
> + loc->function, dev->numa_node);
> +
> + RTE_LOG(DEBUG, EAL, " remove driver: %x:%x %s\n",
> dev->id.vendor_id,
> + dev->id.device_id, dr->name);
> +
> + /* call the driver devuninit() function */
> + if (dr->devuninit && (dr->devuninit(dev) < 0))
> + return -1; /* negative value is an error */
> +
> + /* clear driver structure */
> + dev->driver = NULL;
> +
> + if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING)
> + /* unmap resources for devices that use igb_uio */
> + pci_unmap_device(dev);
> +
> + return 0;
> + }
> +
> + /* return positive value if driver is not found */
> + return 1;
> +}
> +#endif /* RTE_LIBRTE_EAL_HOTPLUG */
> +
> +/*
> * If vendor/device ID match, call the devinit() function of all
> * registered driver for the given device. Return -1 if initialization
> * failed, return 1 if no driver is found for this device.
> diff --git a/lib/librte_eal/common/eal_private.h
> b/lib/librte_eal/common/eal_private.h
> index 95b9e30..c3659e2 100644
> --- a/lib/librte_eal/common/eal_private.h
> +++ b/lib/librte_eal/common/eal_private.h
> @@ -156,23 +156,14 @@ struct rte_pci_driver;
> struct rte_pci_device;
>
> /**
> - * Map this device
> + * Unbind kernel driver for this device
> *
> * This function is private to EAL.
> *
> * @return
> * 0 on success, negative on error
> */
> -int pci_map_device(struct rte_pci_device *dev);
> -
> -#ifdef RTE_LIBRTE_EAL_HOTPLUG
> -/**
> - * Unmap this device
> - *
> - * This function is private to EAL.
> - */
> -void pci_unmap_device(struct rte_pci_device *dev);
> -#endif /* RTE_LIBRTE_EAL_HOTPLUG */
> +int pci_unbind_kernel_driver(struct rte_pci_device *dev);
>
> /**
> * Map the PCI resource of a PCI device in virtual memory
> @@ -194,32 +185,6 @@ void pci_uio_unmap_resource(struct rte_pci_device
> *dev);
> #endif /* RTE_LIBRTE_EAL_HOTPLUG */
>
> /**
> - * Mmap memory for single PCI device
> - *
> - * This function is private to EAL.
> - *
> - * @return
> - * 0 on success, negative on error
> - */
> -int rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr,
> - struct rte_pci_device *dev);
> -
> -/**
> - * Munmap memory for single PCI device
> - *
> - * This function is private to EAL.
> - *
> - * @param dr
> - * The pointer to the pci driver structure
> - * @param dev
> - * The pointer to the pci device structure
> - * @return
> - * 0 on success, negative on error
> - */
> -int rte_eal_pci_close_one_driver(struct rte_pci_driver *dr,
> - struct rte_pci_device *dev);
> -
> -/**
> * Allocate uio resource for PCI device
> *
> * This function is private to EAL.
> diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c
> b/lib/librte_eal/linuxapp/eal/eal_pci.c
> index 7e8df7d..ad6d1de 100644
> --- a/lib/librte_eal/linuxapp/eal/eal_pci.c
> +++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
> @@ -2,6 +2,7 @@
> * BSD LICENSE
> *
> * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> + * Copyright(c) 2015 IGEL Co., Ltd.
> * All rights reserved.
> *
> * Redistribution and use in source and binary forms, with or without
> @@ -56,7 +57,7 @@
> */
>
> /* unbind kernel driver for this device */
> -static int
> +int
> pci_unbind_kernel_driver(struct rte_pci_device *dev)
> {
> int n;
> @@ -522,146 +523,6 @@ pci_config_space_set(struct rte_pci_device *dev)
> }
> #endif
>
> -/*
> - * If vendor/device ID match, call the devinit() function of the
> - * driver.
> - */
> -int
> -rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct
> rte_pci_device *dev)
> -{
> - int ret;
> - const struct rte_pci_id *id_table;
> -
> - for (id_table = dr->id_table; id_table->vendor_id != 0;
> id_table++) {
> -
> - /* check if device's identifiers match the driver's ones */
> - if (id_table->vendor_id != dev->id.vendor_id &&
> - id_table->vendor_id != PCI_ANY_ID)
> - continue;
> - if (id_table->device_id != dev->id.device_id &&
> - id_table->device_id != PCI_ANY_ID)
> - continue;
> - if (id_table->subsystem_vendor_id !=
> dev->id.subsystem_vendor_id &&
> - id_table->subsystem_vendor_id !=
> PCI_ANY_ID)
> - continue;
> - if (id_table->subsystem_device_id !=
> dev->id.subsystem_device_id &&
> - id_table->subsystem_device_id !=
> PCI_ANY_ID)
> - continue;
> -
> - struct rte_pci_addr *loc = &dev->addr;
> -
> - RTE_LOG(DEBUG, EAL, "PCI device "PCI_PRI_FMT" on NUMA
> socket %i\n",
> - loc->domain, loc->bus, loc->devid,
> loc->function,
> - dev->numa_node);
> -
> - RTE_LOG(DEBUG, EAL, " probe driver: %x:%x %s\n",
> dev->id.vendor_id,
> - dev->id.device_id, dr->name);
> -
> - /* no initialization when blacklisted, return without
> error */
> - if (dev->devargs != NULL &&
> - dev->devargs->type == RTE_DEVTYPE_BLACKLISTED_PCI)
> {
> - RTE_LOG(DEBUG, EAL, " Device is blacklisted, not
> initializing\n");
> - return 1;
> - }
> -
> - if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) {
> -#ifdef RTE_PCI_CONFIG
> - /*
> - * Set PCIe config space for high performance.
> - * Return value can be ignored.
> - */
> - pci_config_space_set(dev);
> -#endif
> - /* map resources for devices that use igb_uio */
> - ret = pci_map_device(dev);
> - if (ret != 0)
> - return ret;
> - } else if (dr->drv_flags & RTE_PCI_DRV_FORCE_UNBIND &&
> - rte_eal_process_type() == RTE_PROC_PRIMARY) {
> - /* unbind current driver */
> - if (pci_unbind_kernel_driver(dev) < 0)
> - return -1;
> - }
> -
> - /* reference driver structure */
> - dev->driver = dr;
> -
> - /* call the driver devinit() function */
> - return dr->devinit(dr, dev);
> - }
> - /* return positive value if driver is not found */
> - return 1;
> -}
> -
> -#ifdef RTE_LIBRTE_EAL_HOTPLUG
> -/*
> - * If vendor/device ID match, call the devuninit() function of the
> - * driver.
> - */
> -int
> -rte_eal_pci_close_one_driver(struct rte_pci_driver *dr,
> - struct rte_pci_device *dev)
> -{
> - const struct rte_pci_id *id_table;
> -
> - if ((dr == NULL) || (dev == NULL))
> - return -EINVAL;
> -
> - for (id_table = dr->id_table; id_table->vendor_id != 0;
> id_table++) {
> -
> - /* check if device's identifiers match the driver's ones */
> - if (id_table->vendor_id != dev->id.vendor_id &&
> - id_table->vendor_id != PCI_ANY_ID)
> - continue;
> - if (id_table->device_id != dev->id.device_id &&
> - id_table->device_id != PCI_ANY_ID)
> - continue;
> - if (id_table->subsystem_vendor_id !=
> - dev->id.subsystem_vendor_id &&
> - id_table->subsystem_vendor_id != PCI_ANY_ID)
> - continue;
> - if (id_table->subsystem_device_id !=
> - dev->id.subsystem_device_id &&
> - id_table->subsystem_device_id != PCI_ANY_ID)
> - continue;
> -
> - struct rte_pci_addr *loc = &dev->addr;
> -
> - RTE_LOG(DEBUG, EAL,
> - "PCI device "PCI_PRI_FMT" on NUMA socket
> %i\n",
> - loc->domain, loc->bus, loc->devid,
> - loc->function, dev->numa_node);
> -
> - RTE_LOG(DEBUG, EAL, " remove driver: %x:%x %s\n",
> - dev->id.vendor_id, dev->id.device_id,
> - dr->name);
> -
> - /* call the driver devuninit() function */
> - if (dr->devuninit && (dr->devuninit(dev) < 0))
> - return -1; /* negative value is an error */
> -
> - /* clear driver structure */
> - dev->driver = NULL;
> -
> - if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING)
> - /* unmap resources for devices that use igb_uio */
> - pci_unmap_device(dev);
> -
> - return 0;
> - }
> - /* return positive value if driver is not found */
> - return 1;
> -}
> -#else /* RTE_LIBRTE_EAL_HOTPLUG */
> -int
> -rte_eal_pci_close_one_driver(struct rte_pci_driver *dr __rte_unused,
> - struct rte_pci_device *dev __rte_unused)
> -{
> - RTE_LOG(ERR, EAL, "Hotplug support isn't enabled\n");
> - return -1;
> -}
> -#endif /* RTE_LIBRTE_EAL_HOTPLUG */
> -
> /* Init the PCI EAL subsystem */
> int
> rte_eal_pci_init(void)
> --
> 2.1.4
>
>
Acked-by: David Marchand <david.marchand@6wind.com>
--
David Marchand
next prev parent reply other threads:[~2015-07-07 8:07 UTC|newest]
Thread overview: 120+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-19 5:54 [dpdk-dev] [PATCH v4 0/5] Clean up pci uio implementations Tetsuya Mukawa
2015-05-19 5:54 ` [dpdk-dev] [PATCH v4 1/5] eal: Fix coding style of eal_pci.c and eal_pci_uio.c Tetsuya Mukawa
2015-05-19 14:51 ` Stephen Hemminger
2015-06-25 3:19 ` [dpdk-dev] [PATCH v5 0/5] Clean up pci uio implementations Tetsuya Mukawa
2015-06-25 3:19 ` [dpdk-dev] [PATCH v5 1/5] eal: Fix coding style of eal_pci.c and eal_pci_uio.c Tetsuya Mukawa
2015-06-25 9:16 ` David Marchand
2015-06-25 3:19 ` [dpdk-dev] [PATCH v5 2/5] eal: Close file descriptor of uio configuration Tetsuya Mukawa
2015-06-25 3:19 ` [dpdk-dev] [PATCH v5 3/5] eal: Fix memory leaks and needless increment of pci_map_addr Tetsuya Mukawa
2015-06-25 9:16 ` David Marchand
2015-06-26 1:30 ` Tetsuya Mukawa
2015-06-25 9:18 ` David Marchand
2015-06-26 1:35 ` Tetsuya Mukawa
2015-06-26 8:18 ` [dpdk-dev] [PATCH v6 0/5] Clean up pci uio implementations Tetsuya Mukawa
2015-06-26 8:18 ` [dpdk-dev] [PATCH v6 1/5] eal: Fix coding style of eal_pci.c and eal_pci_uio.c Tetsuya Mukawa
2015-06-26 14:30 ` Iremonger, Bernard
2015-06-26 8:18 ` [dpdk-dev] [PATCH v6 2/5] eal: Close file descriptor of uio configuration Tetsuya Mukawa
2015-06-26 14:32 ` Iremonger, Bernard
2015-06-26 8:18 ` [dpdk-dev] [PATCH v6 3/5] eal: Fix memory leaks and needless increment of pci_map_addr Tetsuya Mukawa
2015-06-26 14:34 ` Iremonger, Bernard
2015-06-30 8:24 ` [dpdk-dev] [PATCH v7 00/12] Clean up pci uio implementations Tetsuya Mukawa
2015-06-30 8:24 ` [dpdk-dev] [PATCH v7 01/12] eal: Fix coding style of eal_pci.c and eal_pci_uio.c Tetsuya Mukawa
2015-06-30 8:24 ` [dpdk-dev] [PATCH v7 02/12] eal: Close file descriptor of uio configuration Tetsuya Mukawa
2015-06-30 8:24 ` [dpdk-dev] [PATCH v7 03/12] eal: Fix memory leaks and needless increment of pci_map_addr Tetsuya Mukawa
2015-06-30 12:33 ` Iremonger, Bernard
2015-07-02 9:57 ` Bruce Richardson
2015-07-03 8:51 ` Tetsuya Mukawa
2015-06-30 8:24 ` [dpdk-dev] [PATCH v7 04/12] eal/bsdapp: Change names of pci related data structure Tetsuya Mukawa
2015-06-30 12:36 ` Iremonger, Bernard
2015-06-30 8:24 ` [dpdk-dev] [PATCH v7 05/12] eal: Fix uio mapping differences between linuxapp and bsdapp Tetsuya Mukawa
2015-06-30 12:51 ` Iremonger, Bernard
2015-07-02 10:20 ` Bruce Richardson
2015-07-03 8:51 ` Tetsuya Mukawa
2015-06-30 8:24 ` [dpdk-dev] [PATCH v7 06/12] eal: Add pci_uio_alloc_resource() Tetsuya Mukawa
2015-07-02 10:46 ` Bruce Richardson
2015-07-03 8:52 ` Tetsuya Mukawa
2015-07-03 9:45 ` Bruce Richardson
2015-06-30 8:24 ` [dpdk-dev] [PATCH v7 07/12] eal: Add pci_uio_map_resource_by_index() Tetsuya Mukawa
2015-06-30 8:24 ` [dpdk-dev] [PATCH v7 08/12] eal: Consolidate pci_map and mapped_pci_resource of linuxapp and bsdapp Tetsuya Mukawa
2015-06-30 14:25 ` Iremonger, Bernard
2015-06-30 8:24 ` [dpdk-dev] [PATCH v7 09/12] eal: Consolidate pci_map/unmap_resource() " Tetsuya Mukawa
2015-06-30 14:28 ` Iremonger, Bernard
2015-07-02 11:11 ` Bruce Richardson
2015-07-03 8:52 ` Tetsuya Mukawa
2015-06-30 8:24 ` [dpdk-dev] [PATCH v7 10/12] eal: Consolidate pci uio functions " Tetsuya Mukawa
2015-06-30 8:24 ` [dpdk-dev] [PATCH v7 11/12] eal: Consolidate pci_map/unmap_device() " Tetsuya Mukawa
2015-06-30 14:45 ` Iremonger, Bernard
2015-07-06 6:24 ` [dpdk-dev] [PATCH v8 00/12] Clean up pci uio implementations Tetsuya Mukawa
2015-07-06 6:24 ` [dpdk-dev] [PATCH v8 01/12] eal: Fix coding style of eal_pci.c and eal_pci_uio.c Tetsuya Mukawa
2015-07-07 8:04 ` David Marchand
2015-07-08 2:42 ` Tetsuya Mukawa
2015-07-06 6:24 ` [dpdk-dev] [PATCH v8 02/12] eal: Close file descriptor of uio configuration Tetsuya Mukawa
2015-07-07 8:04 ` David Marchand
2015-07-06 6:24 ` [dpdk-dev] [PATCH v8 03/12] eal: Fix memory leaks and needless increment of pci_map_addr Tetsuya Mukawa
2015-07-07 8:04 ` David Marchand
2015-07-08 2:42 ` Tetsuya Mukawa
2015-07-06 6:24 ` [dpdk-dev] [PATCH v8 04/12] eal/bsdapp: Change names of pci related data structure Tetsuya Mukawa
2015-07-07 8:04 ` David Marchand
2015-07-06 6:24 ` [dpdk-dev] [PATCH v8 05/12] eal: Fix uio mapping differences between linuxapp and bsdapp Tetsuya Mukawa
2015-07-07 8:04 ` David Marchand
2015-07-08 2:42 ` Tetsuya Mukawa
2015-07-06 6:24 ` [dpdk-dev] [PATCH v8 06/12] eal: Add pci_uio_alloc_resource() Tetsuya Mukawa
2015-07-07 8:04 ` David Marchand
2015-07-08 2:42 ` Tetsuya Mukawa
2015-07-06 6:24 ` [dpdk-dev] [PATCH v8 07/12] eal: Add pci_uio_map_resource_by_index() Tetsuya Mukawa
2015-07-07 8:05 ` David Marchand
2015-07-08 2:42 ` Tetsuya Mukawa
2015-07-06 6:24 ` [dpdk-dev] [PATCH v8 08/12] eal: Consolidate pci_map and mapped_pci_resource of linuxapp and bsdapp Tetsuya Mukawa
2015-07-07 8:05 ` David Marchand
2015-07-06 6:24 ` [dpdk-dev] [PATCH v8 09/12] eal: Consolidate pci_map/unmap_resource() " Tetsuya Mukawa
2015-07-07 8:05 ` David Marchand
2015-07-06 6:24 ` [dpdk-dev] [PATCH v8 10/12] eal: Consolidate pci uio functions " Tetsuya Mukawa
2015-07-07 8:07 ` David Marchand
2015-07-06 6:24 ` [dpdk-dev] [PATCH v8 11/12] eal: Consolidate pci_map/unmap_device() " Tetsuya Mukawa
2015-07-07 8:06 ` David Marchand
2015-07-08 2:42 ` Tetsuya Mukawa
2015-07-08 8:27 ` Thomas Monjalon
2015-07-08 8:50 ` Tetsuya Mukawa
2015-07-06 6:24 ` [dpdk-dev] [PATCH v8 12/12] eal: Consolidate rte_eal_pci_probe/close_one_driver() " Tetsuya Mukawa
2015-07-07 8:07 ` David Marchand [this message]
2015-07-08 10:34 ` [dpdk-dev] [PATCH v9 00/12] Clean up pci uio implementations Tetsuya Mukawa
2015-07-08 10:34 ` [dpdk-dev] [PATCH v9 01/12] eal: Fix coding style of eal_pci.c and eal_pci_uio.c Tetsuya Mukawa
2015-07-08 16:09 ` Stephen Hemminger
2015-07-08 20:30 ` Thomas Monjalon
2015-07-09 1:09 ` Tetsuya Mukawa
2015-07-08 10:34 ` [dpdk-dev] [PATCH v9 02/12] eal: Close file descriptor of uio configuration Tetsuya Mukawa
2015-07-08 10:34 ` [dpdk-dev] [PATCH v9 03/12] eal: Fix memory leaks and needless increment of pci_map_addr Tetsuya Mukawa
2015-07-08 10:34 ` [dpdk-dev] [PATCH v9 04/12] eal/bsdapp: Change names of pci related data structure Tetsuya Mukawa
2015-07-08 10:34 ` [dpdk-dev] [PATCH v9 05/12] eal: Fix uio mapping differences between linuxapp and bsdapp Tetsuya Mukawa
2015-07-08 10:34 ` [dpdk-dev] [PATCH v9 06/12] eal: Add pci_uio_alloc/free_resource() Tetsuya Mukawa
2015-07-08 10:34 ` [dpdk-dev] [PATCH v9 07/12] eal: Add pci_uio_map_resource_by_index() Tetsuya Mukawa
2015-07-08 10:34 ` [dpdk-dev] [PATCH v9 08/12] eal: Consolidate pci_map and mapped_pci_resource of linuxapp and bsdapp Tetsuya Mukawa
2015-07-08 10:34 ` [dpdk-dev] [PATCH v9 09/12] eal: Consolidate pci_map/unmap_resource() " Tetsuya Mukawa
2015-07-08 10:34 ` [dpdk-dev] [PATCH v9 10/12] eal: Consolidate pci uio functions " Tetsuya Mukawa
2015-07-08 10:34 ` [dpdk-dev] [PATCH v9 11/12] eal: Consolidate pci_map/unmap_device() " Tetsuya Mukawa
2015-07-08 10:34 ` [dpdk-dev] [PATCH v9 12/12] eal: Consolidate rte_eal_pci_probe/close_one_driver() " Tetsuya Mukawa
2015-07-08 12:36 ` [dpdk-dev] [PATCH v9 00/12] Clean up pci uio implementations David Marchand
2015-07-08 21:52 ` Thomas Monjalon
2015-06-30 8:24 ` [dpdk-dev] [PATCH v7 12/12] eal: Consolidate rte_eal_pci_probe/close_one_driver() of linuxapp and bsdapp Tetsuya Mukawa
2015-06-30 14:56 ` Iremonger, Bernard
2015-07-01 6:39 ` Tetsuya Mukawa
2015-07-02 11:32 ` [dpdk-dev] [PATCH v7 00/12] Clean up pci uio implementations Bruce Richardson
2015-07-03 8:52 ` Tetsuya Mukawa
2015-06-26 8:18 ` [dpdk-dev] [PATCH v6 4/5] eal/bsdapp: Change names of pci related data structure Tetsuya Mukawa
2015-06-26 14:36 ` Iremonger, Bernard
2015-06-26 8:18 ` [dpdk-dev] [PATCH v6 5/5] eal: Fix uio mapping differences between linuxapp and bsdapp Tetsuya Mukawa
2015-06-26 14:42 ` Iremonger, Bernard
2015-06-25 3:19 ` [dpdk-dev] [PATCH v5 4/5] eal/bsdapp: Change names of pci related data structure Tetsuya Mukawa
2015-06-25 9:19 ` David Marchand
2015-06-25 3:19 ` [dpdk-dev] [PATCH v5 5/5] eal: Fix uio mapping differences between linuxapp and bsdapp Tetsuya Mukawa
2015-05-19 5:54 ` [dpdk-dev] [PATCH v4 2/5] eal: Close file descriptor of uio configuration Tetsuya Mukawa
2015-05-19 16:02 ` Stephen Hemminger
2015-05-19 5:54 ` [dpdk-dev] [PATCH v4 3/5] eal: Fix memory leaks and needless increment of pci_map_addr Tetsuya Mukawa
2015-06-15 14:29 ` Iremonger, Bernard
2015-06-15 15:05 ` Iremonger, Bernard
2015-05-19 5:54 ` [dpdk-dev] [PATCH v4 4/5] eal/bsdapp: Change names of pci related data structure Tetsuya Mukawa
2015-05-19 5:54 ` [dpdk-dev] [PATCH v4 5/5] eal: Fix uio mapping differences between linuxapp and bsdapp Tetsuya Mukawa
2015-06-15 14:31 ` Iremonger, Bernard
2015-06-15 15:08 ` Iremonger, Bernard
2015-06-15 15:17 ` Thomas Monjalon
2015-05-19 5:57 ` [dpdk-dev] [PATCH v4 0/5] Clean up pci uio implementations Tetsuya Mukawa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CALwxeUuRAD92dkRLhRajDQB19wv32-XNNs-mwr1v0hkv2wtD3g@mail.gmail.com \
--to=david.marchand@6wind.com \
--cc=dev@dpdk.org \
--cc=mukawa@igel.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).