rte_memzone_reserve_aligned(): No appropriate segment found
pci_uio_map_resource(): cannot store uio mmap details
Error - exiting with code: 1
No probed ethernet devices - check that CONFIG_RTE_LIBRTE_IGB_PMD =y and that CONFIG_RTE_LIBRTE_IXGBE_PMD=y in your configuration file
Below is what I see in dmesg:
igb_uio 0000:04:00.0: irq 79 for MSI/MSI-X
uio device registered with irq 4f
My setup is a dell R510 with two quad-core Xeons (E5506), 32 GB memory. It has 5 NICs of which two are up (eth0: BCM5716 and eth4 Intel 82598EB 10 Gigabit). Both NICs are on the same subnet before I had dpdk attach to eth4 by running the following command:
sudo ./testpmd -c ff -n 4 -r 2 -m 2048 -b 0000:01:00.0
0000:04:00.0 is the Intel and 0000:01:00.0 is the Broadcom.
Originally I was getting the "No probed ethernet devices" because I had a non-supported NIC, however 82598 is a supported NIC and it seems that dpdk did bind to the Intel NIC. However, rte_eth_dev_count() somehow still returns 0. Any help would be great! Thanks!
Peter