Re: [dpdk-dev] MLX5 QP creation failure - cannot allocate memory

[Amedeo Sapio <amedeo.sapio@gmail.com>]

I should also add that I am using flow director and rte_flow APIs to send
ingress traffic to the different queues. You can see my port_init function
here <https://coliru.stacked-crooked.com/a/6988edaa96d15952> (for DPDK
18.11) .
I also tried do change the number of TX/RX descriptors from 32768 to 16384,
with no success.
---
Amedeo


On Thu, Jan 17, 2019 at 12:07 AM Amedeo Sapio <amedeo.sapio@gmail.com>
wrote:

> Hi all,
>
> I am developing a DPDK program using a Mellanox ConnectX-5 100G.
> My program starts N workers (one per core), and each worker deals with its
> own dedicated TX and RX queue, therefore I need to setup N TX and N RX
> queues.
>
> For each RX queue I create a mbuf pool with:
> n = 262144
> cache size = 512
> priv_size = 0
> data_room_size = RTE_MBUF_DEFAULT_BUF_SIZE
>
> For N<=4 everything works fine, but with N=8,  'rte_eth_dev_start' returns:
> "Unknown error -12"
> and the following error:
> net_mlx5: port 0 Tx queue 0 QP creation failure
> net_mlx5: port 0 Tx queue allocation failed: Cannot allocate memory
>
> I tried
> - to increment the number of Hugepages (up to 64x1G)
> - change the pool size in different ways
> - both dpdk 18.05 and 18.11
>
> but with no success. Do you have any suggestions on what could be the
> issue?
>
> Thanks for your help,
> ---
> Amedeo
>