* [dpdk-dev] How to use ixgbe module log? @ 2017-09-28 10:26 Sam 2017-09-28 11:54 ` Burakov, Anatoly 0 siblings, 1 reply; 4+ messages in thread From: Sam @ 2017-09-28 10:26 UTC (permalink / raw) To: dev Hi all, I'm working on ixgbe, I want to enable "PMD_RX_LOG" and "PMD_TX_LOG", how to do this? As for normal application, I could use --log-level param to start, but ixgbe is kernel module, how to do this? Thank you~ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] How to use ixgbe module log? 2017-09-28 10:26 [dpdk-dev] How to use ixgbe module log? Sam @ 2017-09-28 11:54 ` Burakov, Anatoly 2017-09-29 1:42 ` Sam 0 siblings, 1 reply; 4+ messages in thread From: Burakov, Anatoly @ 2017-09-28 11:54 UTC (permalink / raw) To: dev On 28-Sep-17 11:26 AM, Sam wrote: > Hi all, > > I'm working on ixgbe, I want to enable "PMD_RX_LOG" and "PMD_TX_LOG", how > to do this? > > As for normal application, I could use --log-level param to start, but > ixgbe is kernel module, how to do this? > > Thank you~ > Hi Sam, In DPDK, ixgbe is not a kernel module - these are customized, userspace drivers. In order to enable RX and TX logging, corresponding config options should be set at compile time. For example, if you want to enable RX/TX logging for IXGBE driver, here's a rough list of steps you need to do: 1) create a custom config file in config/ directory. Copy whatever it is that you're using for your application (e.g. defconfig_x86_64-native-linuxapp-gcc), and name it something starting with defconfig_ (e.g. defconfig_myconfig) 2) Set CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX and CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX (and whatever other options you may need, see [1] and [2]) to "y" in your custom config 3) do "make config T=myconfig && make" (or whatever other command you use to build/install DPDK - make sure to specify your custom config as target) After that, you should be able to see RX/TX logs in DPDK applications. [1] http://dpdk.org/browse/dpdk/tree/config/common_base#n171 [2] http://dpdk.org/browse/dpdk/tree/drivers/net/ixgbe/ixgbe_logs.h -- Thanks, Anatoly ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] How to use ixgbe module log? 2017-09-28 11:54 ` Burakov, Anatoly @ 2017-09-29 1:42 ` Sam 2017-09-29 8:38 ` Burakov, Anatoly 0 siblings, 1 reply; 4+ messages in thread From: Sam @ 2017-09-29 1:42 UTC (permalink / raw) To: Burakov, Anatoly; +Cc: dev My question is not clear. Actually ixgbevf driver in my system is kernel module, like this: [root@yf-mos-corp-host175 ~]# modinfo ixgbevf filename: /lib/modules/3.10.0-514.10.2.el7.mt20170307.x86_64/kernel/drivers/net/ethernet/intel/ixgbevf/ixgbevf.ko version: 2.12.1-k-rh7.3 license: GPL description: Intel(R) 10 Gigabit Virtual Function Network Driver author: Intel Corporation, <linux.nics@intel.com> rhelversion: 7.3 srcversion: C9F11E41E5F60ADED5673E1 alias: pci:v00008086d000015A9sv*sd*bc*sc*i* alias: pci:v00008086d000015A8sv*sd*bc*sc*i* alias: pci:v00008086d00001564sv*sd*bc*sc*i* alias: pci:v00008086d00001565sv*sd*bc*sc*i* alias: pci:v00008086d00001530sv*sd*bc*sc*i* alias: pci:v00008086d00001515sv*sd*bc*sc*i* alias: pci:v00008086d0000152Esv*sd*bc*sc*i* alias: pci:v00008086d000010EDsv*sd*bc*sc*i* depends: intree: Y vermagic: 3.10.0-514.10.2.el7.mt20170307.x86_64 SMP mod_unload modversions signer: CentOS Linux kernel signing key sig_key: 44:C9:F5:E3:67:CB:A0:1D:73:A5:17:C8:70:7B:BA:58:FA:FD:7E:30 sig_hashalgo: sha256 parm: debug:Debug level (0=none,...,16=all) (int) and I use dpdk_nic_bind with --driver option to bind netdevice with ixgbevf kernel driver. So I think I use ixgbevf kernel module which is distributed with kernel, and my kernel is: 3.10.0-514.10.2.el7 2017-09-28 19:54 GMT+08:00 Burakov, Anatoly <anatoly.burakov@intel.com>: > On 28-Sep-17 11:26 AM, Sam wrote: > >> Hi all, >> >> I'm working on ixgbe, I want to enable "PMD_RX_LOG" and "PMD_TX_LOG", how >> to do this? >> >> As for normal application, I could use --log-level param to start, but >> ixgbe is kernel module, how to do this? >> >> Thank you~ >> >> > Hi Sam, > > In DPDK, ixgbe is not a kernel module - these are customized, userspace > drivers. In order to enable RX and TX logging, corresponding config options > should be set at compile time. For example, if you want to enable RX/TX > logging for IXGBE driver, here's a rough list of steps you need to do: > > 1) create a custom config file in config/ directory. Copy whatever it is > that you're using for your application (e.g. defconfig_x86_64-native-linuxapp-gcc), > and name it something starting with defconfig_ (e.g. defconfig_myconfig) > 2) Set CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX and CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX > (and whatever other options you may need, see [1] and [2]) to "y" in your > custom config > 3) do "make config T=myconfig && make" (or whatever other command you use > to build/install DPDK - make sure to specify your custom config as target) > > After that, you should be able to see RX/TX logs in DPDK applications. > > [1] http://dpdk.org/browse/dpdk/tree/config/common_base#n171 > [2] http://dpdk.org/browse/dpdk/tree/drivers/net/ixgbe/ixgbe_logs.h > > -- > Thanks, > Anatoly > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] How to use ixgbe module log? 2017-09-29 1:42 ` Sam @ 2017-09-29 8:38 ` Burakov, Anatoly 0 siblings, 0 replies; 4+ messages in thread From: Burakov, Anatoly @ 2017-09-29 8:38 UTC (permalink / raw) To: Sam; +Cc: dev On 29-Sep-17 2:42 AM, Sam wrote: > My question is not clear. Actually ixgbevf driver in my system is kernel > module, like this: > > [root@yf-mos-corp-host175 ~]# modinfo ixgbevf > filename: > /lib/modules/3.10.0-514.10.2.el7.mt20170307.x86_64/kernel/drivers/net/ethernet/intel/ixgbevf/ixgbevf.ko > version: 2.12.1-k-rh7.3 > license: GPL > description: Intel(R) 10 Gigabit Virtual Function Network Driver > author: Intel Corporation, <linux.nics@intel.com > <mailto:linux.nics@intel.com>> > rhelversion: 7.3 > srcversion: C9F11E41E5F60ADED5673E1 > alias: pci:v00008086d000015A9sv*sd*bc*sc*i* > alias: pci:v00008086d000015A8sv*sd*bc*sc*i* > alias: pci:v00008086d00001564sv*sd*bc*sc*i* > alias: pci:v00008086d00001565sv*sd*bc*sc*i* > alias: pci:v00008086d00001530sv*sd*bc*sc*i* > alias: pci:v00008086d00001515sv*sd*bc*sc*i* > alias: pci:v00008086d0000152Esv*sd*bc*sc*i* > alias: pci:v00008086d000010EDsv*sd*bc*sc*i* > depends: > intree: Y > vermagic: 3.10.0-514.10.2.el7.mt20170307.x86_64 SMP mod_unload > modversions > signer: CentOS Linux kernel signing key > sig_key: 44:C9:F5:E3:67:CB:A0:1D:73:A5:17:C8:70:7B:BA:58:FA:FD:7E:30 > sig_hashalgo: sha256 > parm: debug:Debug level (0=none,...,16=all) (int) > > and I use dpdk_nic_bind with --driver option to bind netdevice with > ixgbevf kernel driver. So I think I use ixgbevf kernel module which is > distributed with kernel, and my kernel is: > > 3.10.0-514.10.2.el7 > > > 2017-09-28 19:54 GMT+08:00 Burakov, Anatoly <anatoly.burakov@intel.com > <mailto:anatoly.burakov@intel.com>>: > > On 28-Sep-17 11:26 AM, Sam wrote: > > Hi all, > > I'm working on ixgbe, I want to enable "PMD_RX_LOG" and > "PMD_TX_LOG", how > to do this? > > As for normal application, I could use --log-level param to > start, but > ixgbe is kernel module, how to do this? > > Thank you~ > > > Hi Sam, > > In DPDK, ixgbe is not a kernel module - these are customized, > userspace drivers. In order to enable RX and TX logging, > corresponding config options should be set at compile time. For > example, if you want to enable RX/TX logging for IXGBE driver, > here's a rough list of steps you need to do: > > 1) create a custom config file in config/ directory. Copy whatever > it is that you're using for your application (e.g. > defconfig_x86_64-native-linuxapp-gcc), and name it something > starting with defconfig_ (e.g. defconfig_myconfig) > 2) Set CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX and > CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX (and whatever other options you may > need, see [1] and [2]) to "y" in your custom config > 3) do "make config T=myconfig && make" (or whatever other command > you use to build/install DPDK - make sure to specify your custom > config as target) > > After that, you should be able to see RX/TX logs in DPDK applications. > > [1] http://dpdk.org/browse/dpdk/tree/config/common_base#n171 > <http://dpdk.org/browse/dpdk/tree/config/common_base#n171> > [2] http://dpdk.org/browse/dpdk/tree/drivers/net/ixgbe/ixgbe_logs.h > <http://dpdk.org/browse/dpdk/tree/drivers/net/ixgbe/ixgbe_logs.h> > > -- > Thanks, > Anatoly > > Hi Sam, I'm not too familiar with how it works with kernel drivers (DPDK mailing list is not exactly the right place to ask :) ), but from cursory googling and looking at ixgbevf source code, this is probably achieved either through ethtool --msglvl flag, or through recompiling ixgbevf with debug output enabled. You might want to look at ixgbevf source code and see which particular debugging messages you're interested in, and figure out how to enable them (i.e. if they're wrapped in hw_dbg() macros you'll have to recompile the driver, otherwise you may be able to get them through ethtool). -- Thanks, Anatoly ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-09-29 8:38 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-09-28 10:26 [dpdk-dev] How to use ixgbe module log? Sam 2017-09-28 11:54 ` Burakov, Anatoly 2017-09-29 1:42 ` Sam 2017-09-29 8:38 ` Burakov, Anatoly
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).