From: Sunil Kumar Kori <skori@marvell.com>
To: Sunil Kumar Kori <skori@marvell.com>,
Xiaoyun Li <xiaoyun.li@intel.com>,
Aman Singh <aman.deep.singh@intel.com>,
Yuying Zhang <yuying.zhang@intel.com>,
Cristian Dumitrescu <cristian.dumitrescu@intel.com>,
Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: RE: [PATCH v5 1/1] app/testpmd: support different input color method
Date: Thu, 23 Jun 2022 13:07:37 +0000 [thread overview]
Message-ID: <CO6PR18MB38607254240D0D3B481996E8B4B59@CO6PR18MB3860.namprd18.prod.outlook.com> (raw)
In-Reply-To: <20220623125701.1136065-1-skori@marvell.com>
@Andrew Rybchenko
Please look into it. Updated user guide as suggested.
Regards
Sunil Kumar Kori
> -----Original Message-----
> From: skori@marvell.com <skori@marvell.com>
> Sent: Thursday, June 23, 2022 6:27 PM
> To: Xiaoyun Li <xiaoyun.li@intel.com>; Aman Singh
> <aman.deep.singh@intel.com>; Yuying Zhang <yuying.zhang@intel.com>;
> Cristian Dumitrescu <cristian.dumitrescu@intel.com>
> Cc: dev@dpdk.org; Sunil Kumar Kori <skori@marvell.com>
> Subject: [PATCH v5 1/1] app/testpmd: support different input color method
>
> From: Sunil Kumar Kori <skori@marvell.com>
>
> To enable input coloring, based on VLAN or DSCP, patch adds command line
> interface to configure the following:
>
> - configuring input coloring using VLAN or DSCP while creating
> meter i.e. during rte_mtr_create()
>
> - Update VLAN input coloring table at runtime.
>
> - configures protocol priorities.
>
> - retrieve protocol and priority information
>
> Depends-on: patch-22751 ("ethdev: mtr: support protocol based input color
> selection")
>
> Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
> Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
> ---
> v4..v5:
> - Update testpmd user guide.
>
> v3..v4:
> - Replace strcmp with strcasecmp whereever is needed.
>
> v2..v3:
> - Rebased to branch ToT dpdk-next-net/main
> - Fix static keyword for newly added token parsing symbols
>
> v1..v2:
> - Rebased to branch dpdk-next-net
> - add CLIs for input coloring mechanism
>
> app/test-pmd/cmdline.c | 4 +
> app/test-pmd/cmdline_mtr.c | 552 +++++++++++++++++++-
> app/test-pmd/cmdline_mtr.h | 4 +
> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 35 +-
> 4 files changed, 587 insertions(+), 8 deletions(-)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
> 9a7fd5fc35..ded7dfe656 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -14345,6 +14345,10 @@ static cmdline_parse_ctx_t builtin_ctx[] = {
> (cmdline_parse_inst_t *)&cmd_del_port_meter_policy,
> (cmdline_parse_inst_t *)&cmd_set_port_meter_profile,
> (cmdline_parse_inst_t *)&cmd_set_port_meter_dscp_table,
> + (cmdline_parse_inst_t *)&cmd_set_port_meter_vlan_table,
> + (cmdline_parse_inst_t *)&cmd_set_port_meter_in_proto,
> + (cmdline_parse_inst_t *)&cmd_get_port_meter_in_proto,
> + (cmdline_parse_inst_t *)&cmd_get_port_meter_in_proto_prio,
> (cmdline_parse_inst_t *)&cmd_set_port_meter_stats_mask,
> (cmdline_parse_inst_t *)&cmd_show_port_meter_stats,
> (cmdline_parse_inst_t *)&cmd_mcast_addr, diff --git a/app/test-
> pmd/cmdline_mtr.c b/app/test-pmd/cmdline_mtr.c index
> 57050ec9af..b92e66cedb 100644
> --- a/app/test-pmd/cmdline_mtr.c
> +++ b/app/test-pmd/cmdline_mtr.c
> @@ -14,6 +14,7 @@
> #include "cmdline_mtr.h"
>
> #define PARSE_DELIMITER " \f\n\r\t\v"
> +#define MAX_VLAN_TABLE_ENTRIES 16
> #define MAX_DSCP_TABLE_ENTRIES 64
>
> /** Display Meter Error Message */
> @@ -82,6 +83,122 @@ parse_uint(uint64_t *value, const char *str)
> return 0;
> }
>
> +static int
> +parse_input_color_table_entries(char *str, enum rte_color **dscp_table,
> + enum rte_color **vlan_table)
> +{
> + enum rte_color *vlan, *dscp;
> + char *token;
> + int i = 0;
> +
> + token = strtok_r(str, PARSE_DELIMITER, &str);
> + if (token == NULL)
> + return 0;
> +
> + /* Allocate memory for dscp table */
> + dscp = (enum rte_color *)malloc(MAX_DSCP_TABLE_ENTRIES *
> + sizeof(enum rte_color));
> + if (dscp == NULL)
> + return -1;
> +
> + while (1) {
> + if (strcasecmp(token, "G") == 0)
> + dscp[i++] = RTE_COLOR_GREEN;
> + else if (strcasecmp(token, "Y") == 0)
> + dscp[i++] = RTE_COLOR_YELLOW;
> + else if (strcasecmp(token, "R") == 0)
> + dscp[i++] = RTE_COLOR_RED;
> + else {
> + free(dscp);
> + return -1;
> + }
> + if (i == MAX_DSCP_TABLE_ENTRIES)
> + break;
> +
> + token = strtok_r(str, PARSE_DELIMITER, &str);
> + if (token == NULL) {
> + free(dscp);
> + return -1;
> + }
> + }
> +
> + *dscp_table = dscp;
> +
> + token = strtok_r(str, PARSE_DELIMITER, &str);
> + if (token == NULL)
> + return 0;
> +
> + /* Allocate memory for vlan table */
> + vlan = (enum rte_color *)malloc(MAX_VLAN_TABLE_ENTRIES *
> + sizeof(enum rte_color));
> + if (vlan == NULL)
> + return -1;
> +
> + i = 0;
> + while (1) {
> + if (strcasecmp(token, "G") == 0)
> + vlan[i++] = RTE_COLOR_GREEN;
> + else if (strcasecmp(token, "Y") == 0)
> + vlan[i++] = RTE_COLOR_YELLOW;
> + else if (strcasecmp(token, "R") == 0)
> + vlan[i++] = RTE_COLOR_RED;
> + else {
> + free(vlan);
> + return -1;
> + }
> + if (i == MAX_VLAN_TABLE_ENTRIES)
> + break;
> +
> + token = strtok_r(str, PARSE_DELIMITER, &str);
> + if (token == NULL) {
> + free(vlan);
> + return -1;
> + }
> + }
> +
> + *vlan_table = vlan;
> + return 0;
> +}
> +
> +static int
> +parse_vlan_table_entries(char *str, enum rte_color **vlan_table) {
> + char *token;
> + int i = 0;
> +
> + token = strtok_r(str, PARSE_DELIMITER, &str);
> + if (token == NULL)
> + return 0;
> +
> + /* Allocate memory for vlan table */
> + *vlan_table = (enum rte_color *)malloc(MAX_VLAN_TABLE_ENTRIES
> *
> + sizeof(enum rte_color));
> + if (*vlan_table == NULL)
> + return -1;
> +
> + while (1) {
> + if (strcasecmp(token, "G") == 0)
> + (*vlan_table)[i++] = RTE_COLOR_GREEN;
> + else if (strcasecmp(token, "Y") == 0)
> + (*vlan_table)[i++] = RTE_COLOR_YELLOW;
> + else if (strcasecmp(token, "R") == 0)
> + (*vlan_table)[i++] = RTE_COLOR_RED;
> + else {
> + free(*vlan_table);
> + return -1;
> + }
> + if (i == MAX_VLAN_TABLE_ENTRIES)
> + break;
> +
> + token = strtok_r(str, PARSE_DELIMITER, &str);
> + if (token == NULL) {
> + free(*vlan_table);
> + return -1;
> + }
> + }
> + return 0;
> +}
> +
> static int
> parse_dscp_table_entries(char *str, enum rte_color **dscp_table) { @@ -
> 124,9 +241,30 @@ parse_dscp_table_entries(char *str, enum rte_color
> **dscp_table)
> return 0;
> }
>
> +static int
> +parse_default_input_color_str(char *str, uint64_t *def_inp_color) {
> + char *token;
> +
> + token = strtok_r(str, PARSE_DELIMITER, &str);
> + if (token == NULL)
> + return 0;
> +
> + if (strcasecmp(token, "G") == 0)
> + *def_inp_color = RTE_COLOR_GREEN;
> + else if (strcasecmp(token, "Y") == 0)
> + *def_inp_color = RTE_COLOR_YELLOW;
> + else if (strcasecmp(token, "R") == 0)
> + *def_inp_color = RTE_COLOR_RED;
> + else
> + return -1;
> +
> + return 0;
> +}
> +
> static int
> parse_meter_color_str(char *c_str, uint32_t *use_prev_meter_color,
> - enum rte_color **dscp_table)
> + enum rte_color **vlan_table, enum rte_color **dscp_table)
> {
> char *token;
> uint64_t previous_mtr_color = 0;
> @@ -147,8 +285,7 @@ parse_meter_color_str(char *c_str, uint32_t
> *use_prev_meter_color,
> return 0;
> }
>
> - /* Parse dscp table entries */
> - ret = parse_dscp_table_entries(c_str, dscp_table);
> + ret = parse_input_color_table_entries(c_str, dscp_table, vlan_table);
> if (ret != 0)
> return -1;
>
> @@ -192,6 +329,43 @@ parse_multi_token_string(char *t_str, uint16_t
> *port_id,
> return 0;
> }
>
> +static int
> +parse_multi_token_vlan_str(char *t_str, uint16_t *port_id, uint32_t
> *mtr_id,
> + enum rte_color **vlan_table)
> +{
> + uint64_t val;
> + char *token;
> + int ret;
> +
> + /* First token: port id */
> + token = strtok_r(t_str, PARSE_DELIMITER, &t_str);
> + if (token == NULL)
> + return -1;
> +
> + ret = parse_uint(&val, token);
> + if (ret != 0 || val > UINT16_MAX)
> + return -1;
> +
> + *port_id = val;
> +
> + /* Second token: meter id */
> + token = strtok_r(t_str, PARSE_DELIMITER, &t_str);
> + if (token == NULL)
> + return 0;
> +
> + ret = parse_uint(&val, token);
> + if (ret != 0 || val > UINT32_MAX)
> + return -1;
> +
> + *mtr_id = val;
> +
> + ret = parse_vlan_table_entries(t_str, vlan_table);
> + if (ret != 0)
> + return -1;
> +
> + return 0;
> +}
> +
> /* *** Show Port Meter Capabilities *** */ struct
> cmd_show_port_meter_cap_result {
> cmdline_fixed_string_t show;
> @@ -277,6 +451,10 @@ static void cmd_show_port_meter_cap_parsed(void
> *parsed_result,
> printf("cap.trtcm_rfc4115_packet_mode_supported %" PRId32 "\n",
> cap.trtcm_rfc4115_packet_mode_supported);
> printf("cap.stats_mask %" PRIx64 "\n", cap.stats_mask);
> + printf("cap.input_color_proto_mask 0x%" PRIx64 "\n",
> + cap.input_color_proto_mask);
> + printf("cap.separate_input_color_table_per_port %" PRId32 "\n",
> + cap.separate_input_color_table_per_port);
> }
>
> cmdline_parse_inst_t cmd_show_port_meter_cap = { @@ -721,6 +899,7
> @@ struct cmd_create_port_meter_result {
> cmdline_fixed_string_t r_action;
> uint64_t statistics_mask;
> uint32_t shared;
> + cmdline_fixed_string_t default_input_color;
> cmdline_multi_string_t meter_input_color; };
>
> @@ -754,6 +933,9 @@ static cmdline_parse_token_num_t
> cmd_create_port_meter_statistics_mask = static
> cmdline_parse_token_num_t cmd_create_port_meter_shared =
> TOKEN_NUM_INITIALIZER(struct cmd_create_port_meter_result,
> shared, RTE_UINT32);
> +static cmdline_parse_token_string_t
> cmd_create_port_meter_default_input_color =
> + TOKEN_STRING_INITIALIZER(struct cmd_create_port_meter_result,
> + default_input_color, "R#Y#G#r#y#g");
> static cmdline_parse_token_string_t cmd_create_port_meter_input_color =
> TOKEN_STRING_INITIALIZER(struct cmd_create_port_meter_result,
> meter_input_color, TOKEN_STRING_MULTI); @@ -769,7
> +951,10 @@ static void cmd_create_port_meter_parsed(void
> *parsed_result,
> uint32_t shared = res->shared;
> uint32_t use_prev_meter_color = 0;
> uint16_t port_id = res->port_id;
> + uint64_t def_inp_color = 0;
> enum rte_color *dscp_table = NULL;
> + enum rte_color *vlan_table = NULL;
> + char *def_color_str = res->default_input_color;
> char *c_str = res->meter_input_color;
> int ret;
>
> @@ -780,8 +965,18 @@ static void cmd_create_port_meter_parsed(void
> *parsed_result,
> memset(¶ms, 0, sizeof(struct rte_mtr_params));
> params.meter_profile_id = res->profile_id;
> params.meter_policy_id = res->policy_id;
> +
> + /* Parse meter default input color string params */
> + ret = parse_default_input_color_str(def_color_str, &def_inp_color);
> + if (ret) {
> + fprintf(stderr,
> + " Meter default input color is invalid\n");
> + return;
> + }
> +
> /* Parse meter input color string params */
> - ret = parse_meter_color_str(c_str, &use_prev_meter_color,
> &dscp_table);
> + ret = parse_meter_color_str(c_str, &use_prev_meter_color,
> &vlan_table,
> + &dscp_table);
> if (ret) {
> fprintf(stderr,
> " Meter input color params string parse error\n");
> @@ -789,16 +984,20 @@ static void cmd_create_port_meter_parsed(void
> *parsed_result,
> }
>
> params.use_prev_mtr_color = use_prev_meter_color;
> + params.vlan_table = vlan_table;
> params.dscp_table = dscp_table;
> + params.default_input_color = def_inp_color;
>
> if (strcmp(res->meter_enable, "yes") == 0)
> params.meter_enable = 1;
> else
> params.meter_enable = 0;
> +
> params.stats_mask = res->statistics_mask;
>
> ret = rte_mtr_create(port_id, mtr_id, ¶ms, shared, &error);
> if (ret != 0) {
> + free(vlan_table);
> free(dscp_table);
> print_err_msg(&error);
> return;
> @@ -809,8 +1008,10 @@ cmdline_parse_inst_t cmd_create_port_meter = {
> .f = cmd_create_port_meter_parsed,
> .data = NULL,
> .help_str = "create port meter <port_id> <mtr_id> <profile_id>
> <policy_id> "
> - "<meter_enable>(yes|no) <stats_mask> <shared>
> <use_pre_meter_color> "
> - "[<dscp_tbl_entry0> <dscp_tbl_entry1>
> ...<dscp_tbl_entry63>]",
> + "<meter_enable>(yes|no) <stats_mask> <shared> "
> + "<default_input_color>(g|y|r) <use_pre_meter_color> "
> + "[<dscp_tbl_entry0> <dscp_tbl_entry1>
> ...<dscp_tbl_entry63>] "
> + "[<vlan_tbl_entry0> <vlan_tbl_entry1> ...
> <vlan_tbl_entry15>]",
> .tokens = {
> (void *)&cmd_create_port_meter_create,
> (void *)&cmd_create_port_meter_port,
> @@ -822,6 +1023,7 @@ cmdline_parse_inst_t cmd_create_port_meter = {
> (void *)&cmd_create_port_meter_meter_enable,
> (void *)&cmd_create_port_meter_statistics_mask,
> (void *)&cmd_create_port_meter_shared,
> + (void *)&cmd_create_port_meter_default_input_color,
> (void *)&cmd_create_port_meter_input_color,
> NULL,
> },
> @@ -1224,6 +1426,344 @@ cmdline_parse_inst_t
> cmd_set_port_meter_dscp_table = {
> },
> };
>
> +/* *** Set Port Meter VLAN Table *** */ struct
> +cmd_set_port_meter_vlan_table_result {
> + cmdline_fixed_string_t set;
> + cmdline_fixed_string_t port;
> + cmdline_fixed_string_t meter;
> + cmdline_fixed_string_t vlan_table;
> + cmdline_multi_string_t token_string;
> +};
> +
> +static cmdline_parse_token_string_t cmd_set_port_meter_vlan_table_set =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_set_port_meter_vlan_table_result, set, "set");
> static
> +cmdline_parse_token_string_t cmd_set_port_meter_vlan_table_port =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_set_port_meter_vlan_table_result, port, "port");
> static
> +cmdline_parse_token_string_t cmd_set_port_meter_vlan_table_meter =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_set_port_meter_vlan_table_result, meter,
> "meter"); static
> +cmdline_parse_token_string_t cmd_set_port_meter_vlan_table_vlan_table
> =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_set_port_meter_vlan_table_result,
> + vlan_table, "vlan table");
> +static cmdline_parse_token_string_t
> cmd_set_port_meter_vlan_table_token_string =
> + TOKEN_STRING_INITIALIZER(struct
> cmd_set_port_meter_vlan_table_result,
> + token_string, TOKEN_STRING_MULTI);
> +
> +static void cmd_set_port_meter_vlan_table_parsed(void *parsed_result,
> + __rte_unused struct cmdline *cl,
> + __rte_unused void *data)
> +{
> + struct cmd_set_port_meter_vlan_table_result *res = parsed_result;
> + struct rte_mtr_error error;
> + enum rte_color *vlan_table = NULL;
> + char *t_str = res->token_string;
> + uint32_t mtr_id = 0;
> + uint16_t port_id;
> + int ret;
> +
> + /* Parse string */
> + ret = parse_multi_token_vlan_str(t_str, &port_id, &mtr_id,
> &vlan_table);
> + if (ret) {
> + fprintf(stderr, " Multi token string parse error\n");
> + return;
> + }
> +
> + if (port_id_is_invalid(port_id, ENABLED_WARN))
> + goto free_table;
> +
> + /* Update Meter VLAN Table*/
> + ret = rte_mtr_meter_vlan_table_update(port_id, mtr_id,
> + vlan_table, &error);
> + if (ret != 0)
> + print_err_msg(&error);
> +
> +free_table:
> + free(vlan_table);
> +}
> +
> +cmdline_parse_inst_t cmd_set_port_meter_vlan_table = {
> + .f = cmd_set_port_meter_vlan_table_parsed,
> + .data = NULL,
> + .help_str = "set port meter vlan table <port_id> <mtr_id> "
> + "[<vlan_tbl_entry0> <vlan_tbl_entry1> ...
> <vlan_tbl_entry15>]",
> + .tokens = {
> + (void *)&cmd_set_port_meter_vlan_table_set,
> + (void *)&cmd_set_port_meter_vlan_table_port,
> + (void *)&cmd_set_port_meter_vlan_table_meter,
> + (void *)&cmd_set_port_meter_vlan_table_vlan_table,
> + (void *)&cmd_set_port_meter_vlan_table_token_string,
> + NULL,
> + },
> +};
> +
> +/* *** Set Port Meter input protocol *** */ struct
> +cmd_set_port_meter_in_proto_result {
> + cmdline_fixed_string_t set;
> + cmdline_fixed_string_t port;
> + cmdline_fixed_string_t meter;
> + cmdline_fixed_string_t protocol;
> + cmdline_fixed_string_t proto;
> + uint32_t prio;
> + uint32_t mtr_id;
> + uint16_t port_id;
> +};
> +
> +static cmdline_parse_token_string_t cmd_set_port_meter_in_proto_set =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_set_port_meter_in_proto_result, set, "set");
> +
> +static cmdline_parse_token_string_t cmd_set_port_meter_in_proto_port =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_set_port_meter_in_proto_result, port, "port");
> +
> +static cmdline_parse_token_string_t cmd_set_port_meter_in_proto_meter
> =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_set_port_meter_in_proto_result, meter,
> "meter");
> +
> +static cmdline_parse_token_string_t
> cmd_set_port_meter_in_proto_protocol =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_set_port_meter_in_proto_result, protocol,
> "proto");
> +
> +static cmdline_parse_token_string_t cmd_set_port_meter_in_proto_proto
> =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_set_port_meter_in_proto_result, proto,
> + "outer_vlan#inner_vlan#outer_ip#inner_ip");
> +
> +static cmdline_parse_token_num_t cmd_set_port_meter_in_proto_prio =
> + TOKEN_NUM_INITIALIZER(
> + struct cmd_set_port_meter_in_proto_result, prio,
> RTE_UINT32);
> +
> +static cmdline_parse_token_num_t cmd_set_port_meter_in_proto_port_id
> =
> + TOKEN_NUM_INITIALIZER(
> + struct cmd_set_port_meter_in_proto_result, port_id,
> RTE_UINT16);
> +
> +static cmdline_parse_token_num_t cmd_set_port_meter_in_proto_mtr_id
> =
> + TOKEN_NUM_INITIALIZER(
> + struct cmd_set_port_meter_in_proto_result, mtr_id,
> RTE_UINT32);
> +
> +static void cmd_set_port_meter_in_proto_parsed(void *parsed_result,
> + __rte_unused struct cmdline *cl,
> + __rte_unused void *data)
> +{
> + struct cmd_set_port_meter_in_proto_result *res = parsed_result;
> + enum rte_mtr_color_in_protocol proto;
> + struct rte_mtr_error error;
> + int ret;
> +
> + if (port_id_is_invalid(res->port_id, ENABLED_WARN))
> + return;
> +
> + if (strcmp(res->proto, "outer_vlan") == 0)
> + proto = RTE_MTR_COLOR_IN_PROTO_OUTER_VLAN;
> + else if (strcmp(res->proto, "inner_vlan") == 0)
> + proto = RTE_MTR_COLOR_IN_PROTO_INNER_VLAN;
> + else if (strcmp(res->proto, "outer_ip") == 0)
> + proto = RTE_MTR_COLOR_IN_PROTO_OUTER_IP;
> + else if (strcmp(res->proto, "inner_ip") == 0)
> + proto = RTE_MTR_COLOR_IN_PROTO_INNER_IP;
> + else {
> + printf("Invalid protocol\n");
> + return;
> + }
> +
> + /* Update Meter input proto and priority */
> + ret = rte_mtr_color_in_protocol_set(res->port_id, res->mtr_id,
> + proto, res->prio, &error);
> + if (ret != 0)
> + print_err_msg(&error);
> +}
> +
> +cmdline_parse_inst_t cmd_set_port_meter_in_proto = {
> + .f = cmd_set_port_meter_in_proto_parsed,
> + .data = NULL,
> + .help_str = "set port meter proto <port_id> <mtr_id> <proto> "
> + "<prio>",
> + .tokens = {
> + (void *)&cmd_set_port_meter_in_proto_set,
> + (void *)&cmd_set_port_meter_in_proto_port,
> + (void *)&cmd_set_port_meter_in_proto_meter,
> + (void *)&cmd_set_port_meter_in_proto_protocol,
> + (void *)&cmd_set_port_meter_in_proto_port_id,
> + (void *)&cmd_set_port_meter_in_proto_mtr_id,
> + (void *)&cmd_set_port_meter_in_proto_proto,
> + (void *)&cmd_set_port_meter_in_proto_prio,
> + NULL,
> + },
> +};
> +
> +/* *** Get Port Meter input protocol *** */ struct
> +cmd_get_port_meter_in_proto_result {
> + cmdline_fixed_string_t get;
> + cmdline_fixed_string_t port;
> + cmdline_fixed_string_t meter;
> + cmdline_fixed_string_t protocol;
> + uint32_t mtr_id;
> + uint16_t port_id;
> +};
> +
> +static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_get =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_get_port_meter_in_proto_result, get, "get");
> +
> +static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_port =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_get_port_meter_in_proto_result, port, "port");
> +
> +static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_meter
> =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_get_port_meter_in_proto_result, meter,
> "meter");
> +
> +static cmdline_parse_token_string_t
> cmd_get_port_meter_in_proto_protocol =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_get_port_meter_in_proto_result, protocol,
> "proto");
> +
> +static cmdline_parse_token_num_t cmd_get_port_meter_in_proto_port_id
> =
> + TOKEN_NUM_INITIALIZER(
> + struct cmd_get_port_meter_in_proto_result, port_id,
> RTE_UINT16);
> +
> +static cmdline_parse_token_num_t cmd_get_port_meter_in_proto_mtr_id
> =
> + TOKEN_NUM_INITIALIZER(
> + struct cmd_get_port_meter_in_proto_result, mtr_id,
> RTE_UINT32);
> +
> +static void cmd_get_port_meter_in_proto_parsed(void *parsed_result,
> + __rte_unused struct cmdline *cl,
> + __rte_unused void *data)
> +{
> + struct cmd_set_port_meter_in_proto_result *res = parsed_result;
> + struct rte_mtr_error error;
> + uint64_t proto_mask = 0;
> + int ret;
> +
> + if (port_id_is_invalid(res->port_id, ENABLED_WARN))
> + return;
> +
> + /* Update Meter input proto and priority */
> + ret = rte_mtr_color_in_protocol_get(res->port_id, res->mtr_id,
> + &proto_mask, &error);
> + if (ret != 0)
> + print_err_msg(&error);
> +
> + printf("Enabled protocols:\n");
> + if (proto_mask & RTE_MTR_COLOR_IN_PROTO_OUTER_VLAN)
> + printf("\touter_vlan\n");
> + if (proto_mask & RTE_MTR_COLOR_IN_PROTO_INNER_VLAN)
> + printf("\tinner_vlan\n");
> + if (proto_mask & RTE_MTR_COLOR_IN_PROTO_OUTER_IP)
> + printf("\touter_ip\n");
> + if (proto_mask & RTE_MTR_COLOR_IN_PROTO_INNER_IP)
> + printf("\tinner_ip\n");
> +}
> +
> +cmdline_parse_inst_t cmd_get_port_meter_in_proto = {
> + .f = cmd_get_port_meter_in_proto_parsed,
> + .data = NULL,
> + .help_str = "get port meter proto <port_id> <mtr_id>",
> + .tokens = {
> + (void *)&cmd_get_port_meter_in_proto_get,
> + (void *)&cmd_get_port_meter_in_proto_port,
> + (void *)&cmd_get_port_meter_in_proto_meter,
> + (void *)&cmd_get_port_meter_in_proto_protocol,
> + (void *)&cmd_get_port_meter_in_proto_port_id,
> + (void *)&cmd_get_port_meter_in_proto_mtr_id,
> + NULL,
> + },
> +};
> +
> +/* *** Get Port Meter input protocol priority *** */ struct
> +cmd_get_port_meter_in_proto_prio_result {
> + cmdline_fixed_string_t get;
> + cmdline_fixed_string_t port;
> + cmdline_fixed_string_t meter;
> + cmdline_fixed_string_t protocol;
> + cmdline_fixed_string_t proto;
> + uint32_t mtr_id;
> + uint16_t port_id;
> +};
> +
> +static cmdline_parse_token_string_t
> cmd_get_port_meter_in_proto_prio_get =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_get_port_meter_in_proto_prio_result, get, "get");
> +
> +static cmdline_parse_token_string_t
> cmd_get_port_meter_in_proto_prio_port =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_get_port_meter_in_proto_prio_result, port,
> "port");
> +
> +static cmdline_parse_token_string_t
> cmd_get_port_meter_in_proto_prio_meter =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_get_port_meter_in_proto_prio_result, meter,
> "meter");
> +
> +static cmdline_parse_token_string_t
> cmd_get_port_meter_in_proto_prio_protocol =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_get_port_meter_in_proto_prio_result, protocol,
> + "proto_prio");
> +
> +static cmdline_parse_token_string_t
> cmd_get_port_meter_in_proto_prio_proto =
> + TOKEN_STRING_INITIALIZER(
> + struct cmd_get_port_meter_in_proto_prio_result, proto,
> + "outer_vlan#inner_vlan#outer_ip#inner_ip");
> +
> +static cmdline_parse_token_num_t
> cmd_get_port_meter_in_proto_prio_port_id =
> + TOKEN_NUM_INITIALIZER(
> + struct cmd_get_port_meter_in_proto_prio_result, port_id,
> + RTE_UINT16);
> +
> +static cmdline_parse_token_num_t
> cmd_get_port_meter_in_proto_prio_mtr_id =
> + TOKEN_NUM_INITIALIZER(
> + struct cmd_get_port_meter_in_proto_prio_result, mtr_id,
> + RTE_UINT32);
> +
> +static void cmd_get_port_meter_in_proto_prio_parsed(void
> *parsed_result,
> + __rte_unused struct cmdline *cl,
> + __rte_unused void *data)
> +{
> + struct cmd_get_port_meter_in_proto_prio_result *res =
> parsed_result;
> + enum rte_mtr_color_in_protocol proto;
> + struct rte_mtr_error error;
> + uint32_t prio = 0;
> + int ret;
> +
> + if (port_id_is_invalid(res->port_id, ENABLED_WARN))
> + return;
> +
> + if (strcmp(res->proto, "outer_vlan") == 0)
> + proto = RTE_MTR_COLOR_IN_PROTO_OUTER_VLAN;
> + else if (strcmp(res->proto, "inner_vlan") == 0)
> + proto = RTE_MTR_COLOR_IN_PROTO_INNER_VLAN;
> + else if (strcmp(res->proto, "outer_ip") == 0)
> + proto = RTE_MTR_COLOR_IN_PROTO_OUTER_IP;
> + else if (strcmp(res->proto, "inner_ip") == 0)
> + proto = RTE_MTR_COLOR_IN_PROTO_INNER_IP;
> + else {
> + printf("Invalid protocol\n");
> + return;
> + }
> +
> + /* Get Meter input proto and priority */
> + ret = rte_mtr_color_in_protocol_priority_get(res->port_id, res-
> >mtr_id,
> + proto, &prio, &error);
> + if (ret != 0)
> + print_err_msg(&error);
> +}
> +
> +cmdline_parse_inst_t cmd_get_port_meter_in_proto_prio = {
> + .f = cmd_get_port_meter_in_proto_prio_parsed,
> + .data = NULL,
> + .help_str = "get port meter proto_prio <port_id> <mtr_id> <proto>",
> + .tokens = {
> + (void *)&cmd_get_port_meter_in_proto_prio_get,
> + (void *)&cmd_get_port_meter_in_proto_prio_port,
> + (void *)&cmd_get_port_meter_in_proto_prio_meter,
> + (void *)&cmd_get_port_meter_in_proto_prio_protocol,
> + (void *)&cmd_get_port_meter_in_proto_prio_port_id,
> + (void *)&cmd_get_port_meter_in_proto_prio_mtr_id,
> + (void *)&cmd_get_port_meter_in_proto_prio_proto,
> + NULL,
> + },
> +};
> +
> /* *** Set Port Meter Stats Mask *** */ struct
> cmd_set_port_meter_stats_mask_result {
> cmdline_fixed_string_t set;
> diff --git a/app/test-pmd/cmdline_mtr.h b/app/test-pmd/cmdline_mtr.h
> index 2415fc16c3..23eaa5bc03 100644
> --- a/app/test-pmd/cmdline_mtr.h
> +++ b/app/test-pmd/cmdline_mtr.h
> @@ -19,6 +19,10 @@ extern cmdline_parse_inst_t cmd_del_port_meter;
> extern cmdline_parse_inst_t cmd_del_port_meter_policy; extern
> cmdline_parse_inst_t cmd_set_port_meter_profile; extern
> cmdline_parse_inst_t cmd_set_port_meter_dscp_table;
> +extern cmdline_parse_inst_t cmd_set_port_meter_vlan_table; extern
> +cmdline_parse_inst_t cmd_set_port_meter_in_proto; extern
> +cmdline_parse_inst_t cmd_get_port_meter_in_proto; extern
> +cmdline_parse_inst_t cmd_get_port_meter_in_proto_prio;
> extern cmdline_parse_inst_t cmd_set_port_meter_stats_mask; extern
> cmdline_parse_inst_t cmd_show_port_meter_stats; void
> print_mtr_err_msg(struct rte_mtr_error *error); diff --git
> a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index 0b7a53fdf1..4509a47ed4 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -2527,9 +2527,10 @@ create port meter Create new meter object for
> the ethernet device::
>
> testpmd> create port meter (port_id) (mtr_id) (profile_id) \
> - (policy_id) (meter_enable) (stats_mask) (shared) \
> + (policy_id) (meter_enable) (stats_mask) (shared)
> + (default_input_color) \
> (use_pre_meter_color) [(dscp_tbl_entry0) (dscp_tbl_entry1)...\
> - (dscp_tbl_entry63)]
> + (dscp_tbl_entry63)] [(vlan_tbl_entry0) (vlan_tbl_entry1) ... \
> + (vlan_tbl_entry15)]
>
> where:
>
> @@ -2542,12 +2543,17 @@ where:
> meter object.
> * ``shared``: When this parameter has a non-zero value, the meter object is
> shared by multiple flows. Otherwise, meter object is used by single flow.
> +* ``default_input_color``: Default input color for incoming packets.
> + If incoming packet misses DSCP or VLAN input color table then it will
> +be used
> + as input color.
> * ``use_pre_meter_color``: When this parameter has a non-zero value, the
> input color for the current meter object is determined by the latest meter
> object in the same flow. Otherwise, the current meter object uses the
> *dscp_table* to determine the input color.
> * ``dscp_tbl_entryx``: DSCP table entry x providing meter providing input
> color, 0 <= x <= 63.
> +* ``vlan_tbl_entryx``: VLAN table entry x providing meter input color,
> + 0 <= x <= 15.
>
> enable port meter
> ~~~~~~~~~~~~~~~~~
> @@ -2585,6 +2591,31 @@ Set meter dscp table for the ethernet device::
> testpmd> set port meter dscp table (port_id) (mtr_id) [(dscp_tbl_entry0) \
> (dscp_tbl_entry1)...(dscp_tbl_entry63)]
>
> +set port meter vlan table
> +~~~~~~~~~~~~~~~~~~~~~~~~~
> +Set meter vlan table for the ethernet device::
> +
> + testpmd> set port meter vlan table (port_id) (mtr_id) [(vlan_tbl_entry0) \
> + (vlan_tbl_entry1)...(vlan_tbl_entry15)]
> +
> +set port meter protocol
> +~~~~~~~~~~~~~~~~~~~~~~~
> +Set meter protocol and corresponding priority::
> +
> + testpmd> set port meter proto (port_id) (mtr_id) (proto) (prio)
> +
> +get port meter protocol
> +~~~~~~~~~~~~~~~~~~~~~~~
> +Get meter protocol::
> +
> + testpmd> get port meter proto (port_id) (mtr_id)
> +
> +get port meter protocol priority
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Get priority associated to meter protocol::
> +
> + testpmd> get port meter proto_prio (port_id) (mtr_id) (proto)
> +
> set port meter stats mask
> ~~~~~~~~~~~~~~~~~~~~~~~~~
>
> --
> 2.25.1
next prev parent reply other threads:[~2022-06-23 13:07 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-01 9:00 [PATCH v1 1/3] common/cnxk: update precolor table setup for VLAN skori
2022-03-01 9:00 ` [PATCH v1 2/3] net/cnxk: support ops to update precolor VLAN table skori
2022-06-16 9:48 ` [PATCH v2 1/2] common/cnxk: update precolor table setup for VLAN skori
2022-06-16 9:48 ` [PATCH v2 2/2] net/cnxk: support ops to update precolor VLAN table skori
2022-06-16 11:54 ` [PATCH v3 1/2] common/cnxk: update precolor table setup for VLAN skori
2022-06-16 11:54 ` [PATCH v3 2/2] net/cnxk: support ops to update precolor VLAN table skori
2022-06-20 17:44 ` Jerin Jacob
2022-06-21 7:19 ` [EXT] " Sunil Kumar Kori
2022-06-21 7:35 ` [PATCH v4 1/2] common/cnxk: update precolor table setup for VLAN skori
2022-06-21 7:35 ` [PATCH v4 2/2] net/cnxk: support ops to update precolor VLAN table skori
2022-08-22 12:33 ` Jerin Jacob
2022-03-01 9:00 ` [PATCH v1 3/3] app/testpmd: support different input color method skori
2022-05-20 22:09 ` Ferruh Yigit
2022-05-21 7:07 ` [EXT] " Sunil Kumar Kori
2022-05-23 8:43 ` Ferruh Yigit
2022-05-24 7:35 ` [PATCH v2 1/1] " skori
2022-05-25 12:36 ` Dumitrescu, Cristian
2022-05-25 14:32 ` Sunil Kumar Kori
2022-05-25 14:37 ` skori
2022-05-25 14:41 ` Dumitrescu, Cristian
2022-05-31 15:41 ` Andrew Rybchenko
2022-06-03 13:03 ` [EXT] " Sunil Kumar Kori
2022-06-03 13:06 ` [PATCH v3 " skori
2022-06-08 12:06 ` Andrew Rybchenko
2022-06-14 10:05 ` [PATCH v4 " skori
2022-06-23 11:05 ` Andrew Rybchenko
2022-06-23 12:54 ` [EXT] " Sunil Kumar Kori
2022-06-23 12:57 ` [PATCH v5 " skori
2022-06-23 13:07 ` Sunil Kumar Kori [this message]
2022-06-24 12:44 ` Andrew Rybchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CO6PR18MB38607254240D0D3B481996E8B4B59@CO6PR18MB3860.namprd18.prod.outlook.com \
--to=skori@marvell.com \
--cc=aman.deep.singh@intel.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=cristian.dumitrescu@intel.com \
--cc=dev@dpdk.org \
--cc=xiaoyun.li@intel.com \
--cc=yuying.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).