* [PATCH 2/2] common/cnxk: update meter algorithm in band profile
2021-11-30 6:41 [PATCH 1/2] net/cnxk: update meter bpf ID in rq Rakesh Kudurumalla
@ 2021-11-30 6:41 ` Rakesh Kudurumalla
2021-11-30 7:15 ` Sunil Kumar Kori
2021-11-30 7:16 ` [PATCH 1/2] net/cnxk: update meter bpf ID in rq Sunil Kumar Kori
` (3 subsequent siblings)
4 siblings, 1 reply; 12+ messages in thread
From: Rakesh Kudurumalla @ 2021-11-30 6:41 UTC (permalink / raw)
To: Nithin Dabilpuram, Kiran Kumar K, Sunil Kumar Kori, Satha Rao
Cc: dev, Rakesh Kudurumalla
Patch updates meter algorithm in nix band profile
structure
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
---
drivers/common/cnxk/hw/nix.h | 5 ---
drivers/common/cnxk/roc_nix_bpf.c | 61 +++++++++----------------------
2 files changed, 17 insertions(+), 49 deletions(-)
diff --git a/drivers/common/cnxk/hw/nix.h b/drivers/common/cnxk/hw/nix.h
index dd2ebecc6a..6931f1d1d2 100644
--- a/drivers/common/cnxk/hw/nix.h
+++ b/drivers/common/cnxk/hw/nix.h
@@ -2133,11 +2133,6 @@ struct nix_lso_format {
((NIX_BPF_RATE_CONST * ((256 + (mantissa)) << (exponent))) / \
(((1ull << (div_exp)) * 256 * policer_timeunit)))
-/* Meter rate limits in Bits/Sec */
-#define NIX_BPF_RATE_MIN NIX_BPF_RATE(1000000000, 0, 0, 0)
-#define NIX_BPF_RATE_MAX \
- NIX_BPF_RATE(1, NIX_BPF_MAX_RATE_EXPONENT, NIX_BPF_MAX_RATE_MANTISSA, 0)
-
#define NIX_BPF_DEFAULT_ADJUST_MANTISSA 511
#define NIX_BPF_DEFAULT_ADJUST_EXPONENT 0
diff --git a/drivers/common/cnxk/roc_nix_bpf.c b/drivers/common/cnxk/roc_nix_bpf.c
index 6996a54be0..46ed91e87b 100644
--- a/drivers/common/cnxk/roc_nix_bpf.c
+++ b/drivers/common/cnxk/roc_nix_bpf.c
@@ -38,48 +38,23 @@ meter_rate_to_nix(uint64_t value, uint64_t *exponent_p, uint64_t *mantissa_p,
uint64_t *div_exp_p, uint32_t timeunit_p)
{
uint64_t div_exp, exponent, mantissa;
- uint32_t time_us = timeunit_p;
+ uint32_t time_ns = timeunit_p;
/* Boundary checks */
- if (value < NIX_BPF_RATE_MIN || value > NIX_BPF_RATE_MAX)
+ if (value < NIX_BPF_RATE(time_ns, 0, 0, 0) ||
+ value > NIX_BPF_RATE(time_ns, NIX_BPF_MAX_RATE_EXPONENT,
+ NIX_BPF_MAX_RATE_MANTISSA, 0))
return 0;
- if (value <= NIX_BPF_RATE(time_us, 0, 0, 0)) {
- /* Calculate rate div_exp and mantissa using
- * the following formula:
- *
- * value = (2E6 * (256 + mantissa)
- * / ((1 << div_exp) * 256))
- */
- div_exp = 0;
- exponent = 0;
- mantissa = NIX_BPF_MAX_RATE_MANTISSA;
-
- while (value < (NIX_BPF_RATE_CONST / (1 << div_exp)))
- div_exp += 1;
-
- while (value < ((NIX_BPF_RATE_CONST * (256 + mantissa)) /
- ((1 << div_exp) * 256)))
- mantissa -= 1;
- } else {
- /* Calculate rate exponent and mantissa using
- * the following formula:
- *
- * value = (2E6 * ((256 + mantissa) << exponent)) / 256
- *
- */
- div_exp = 0;
- exponent = NIX_BPF_MAX_RATE_EXPONENT;
- mantissa = NIX_BPF_MAX_RATE_MANTISSA;
-
- while (value < (NIX_BPF_RATE_CONST * (1 << exponent)))
- exponent -= 1;
-
- while (value <
- ((NIX_BPF_RATE_CONST * ((256 + mantissa) << exponent)) /
- 256))
- mantissa -= 1;
- }
+ div_exp = 0;
+ exponent = NIX_BPF_MAX_RATE_EXPONENT;
+ mantissa = NIX_BPF_MAX_RATE_MANTISSA;
+
+ while (value < (NIX_BPF_RATE(time_ns, exponent, 0, 0)))
+ exponent -= 1;
+
+ while (value < (NIX_BPF_RATE(time_ns, exponent, mantissa, 0)))
+ mantissa -= 1;
if (div_exp > NIX_BPF_MAX_RATE_DIV_EXP ||
exponent > NIX_BPF_MAX_RATE_EXPONENT ||
@@ -94,7 +69,7 @@ meter_rate_to_nix(uint64_t value, uint64_t *exponent_p, uint64_t *mantissa_p,
*mantissa_p = mantissa;
/* Calculate real rate value */
- return NIX_BPF_RATE(time_us, exponent, mantissa, div_exp);
+ return NIX_BPF_RATE(time_ns, exponent, mantissa, div_exp);
}
static inline uint64_t
@@ -195,11 +170,7 @@ nix_precolor_conv_table_write(struct roc_nix *roc_nix, uint64_t val,
int64_t *addr;
addr = PLT_PTR_ADD(nix->base, off);
- /* FIXME: Currently writing to this register throwing kernel dump.
- * plt_write64(val, addr);
- */
- PLT_SET_USED(val);
- PLT_SET_USED(addr);
+ plt_write64(val, addr);
}
static uint8_t
@@ -665,6 +636,7 @@ roc_nix_bpf_config(struct roc_nix *roc_nix, uint16_t id,
aq->prof.lmode = cfg->lmode;
aq->prof.icolor = cfg->icolor;
+ aq->prof.meter_algo = cfg->alg;
aq->prof.pc_mode = cfg->pc_mode;
aq->prof.tnl_ena = cfg->tnl_ena;
aq->prof.gc_action = cfg->action[ROC_NIX_BPF_COLOR_GREEN];
@@ -673,6 +645,7 @@ roc_nix_bpf_config(struct roc_nix *roc_nix, uint16_t id,
aq->prof_mask.lmode = ~(aq->prof_mask.lmode);
aq->prof_mask.icolor = ~(aq->prof_mask.icolor);
+ aq->prof_mask.meter_algo = ~(aq->prof_mask.meter_algo);
aq->prof_mask.pc_mode = ~(aq->prof_mask.pc_mode);
aq->prof_mask.tnl_ena = ~(aq->prof_mask.tnl_ena);
aq->prof_mask.gc_action = ~(aq->prof_mask.gc_action);
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: [PATCH 2/2] common/cnxk: update meter algorithm in band profile
2021-11-30 6:41 ` [PATCH 2/2] common/cnxk: update meter algorithm in band profile Rakesh Kudurumalla
@ 2021-11-30 7:15 ` Sunil Kumar Kori
0 siblings, 0 replies; 12+ messages in thread
From: Sunil Kumar Kori @ 2021-11-30 7:15 UTC (permalink / raw)
To: Rakesh Kudurumalla, Nithin Kumar Dabilpuram,
Kiran Kumar Kokkilagadda, Satha Koteswara Rao Kottidi
Cc: dev, Rakesh Kudurumalla
>-----Original Message-----
>From: Rakesh Kudurumalla <rkudurumalla@marvell.com>
>Sent: Tuesday, November 30, 2021 12:12 PM
>To: Nithin Kumar Dabilpuram <ndabilpuram@marvell.com>; Kiran Kumar
>Kokkilagadda <kirankumark@marvell.com>; Sunil Kumar Kori
><skori@marvell.com>; Satha Koteswara Rao Kottidi
><skoteshwar@marvell.com>
>Cc: dev@dpdk.org; Rakesh Kudurumalla <rkudurumalla@marvell.com>
>Subject: [PATCH 2/2] common/cnxk: update meter algorithm in band profile
>
>Patch updates meter algorithm in nix band profile structure
>
>Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
>---
> drivers/common/cnxk/hw/nix.h | 5 ---
> drivers/common/cnxk/roc_nix_bpf.c | 61 +++++++++----------------------
> 2 files changed, 17 insertions(+), 49 deletions(-)
>
>diff --git a/drivers/common/cnxk/hw/nix.h b/drivers/common/cnxk/hw/nix.h
>index dd2ebecc6a..6931f1d1d2 100644
>--- a/drivers/common/cnxk/hw/nix.h
>+++ b/drivers/common/cnxk/hw/nix.h
>@@ -2133,11 +2133,6 @@ struct nix_lso_format {
> ((NIX_BPF_RATE_CONST * ((256 + (mantissa)) << (exponent))) / \
> (((1ull << (div_exp)) * 256 * policer_timeunit)))
>
>-/* Meter rate limits in Bits/Sec */
>-#define NIX_BPF_RATE_MIN NIX_BPF_RATE(1000000000, 0, 0, 0)
>-#define NIX_BPF_RATE_MAX \
>- NIX_BPF_RATE(1, NIX_BPF_MAX_RATE_EXPONENT,
>NIX_BPF_MAX_RATE_MANTISSA, 0)
>-
> #define NIX_BPF_DEFAULT_ADJUST_MANTISSA 511 #define
>NIX_BPF_DEFAULT_ADJUST_EXPONENT 0
>
>diff --git a/drivers/common/cnxk/roc_nix_bpf.c
>b/drivers/common/cnxk/roc_nix_bpf.c
>index 6996a54be0..46ed91e87b 100644
>--- a/drivers/common/cnxk/roc_nix_bpf.c
>+++ b/drivers/common/cnxk/roc_nix_bpf.c
>@@ -38,48 +38,23 @@ meter_rate_to_nix(uint64_t value, uint64_t
>*exponent_p, uint64_t *mantissa_p,
> uint64_t *div_exp_p, uint32_t timeunit_p) {
> uint64_t div_exp, exponent, mantissa;
>- uint32_t time_us = timeunit_p;
>+ uint32_t time_ns = timeunit_p;
>
> /* Boundary checks */
>- if (value < NIX_BPF_RATE_MIN || value > NIX_BPF_RATE_MAX)
>+ if (value < NIX_BPF_RATE(time_ns, 0, 0, 0) ||
>+ value > NIX_BPF_RATE(time_ns, NIX_BPF_MAX_RATE_EXPONENT,
>+ NIX_BPF_MAX_RATE_MANTISSA, 0))
> return 0;
>
>- if (value <= NIX_BPF_RATE(time_us, 0, 0, 0)) {
>- /* Calculate rate div_exp and mantissa using
>- * the following formula:
>- *
>- * value = (2E6 * (256 + mantissa)
>- * / ((1 << div_exp) * 256))
>- */
>- div_exp = 0;
>- exponent = 0;
>- mantissa = NIX_BPF_MAX_RATE_MANTISSA;
>-
>- while (value < (NIX_BPF_RATE_CONST / (1 << div_exp)))
>- div_exp += 1;
>-
>- while (value < ((NIX_BPF_RATE_CONST * (256 + mantissa)) /
>- ((1 << div_exp) * 256)))
>- mantissa -= 1;
>- } else {
>- /* Calculate rate exponent and mantissa using
>- * the following formula:
>- *
>- * value = (2E6 * ((256 + mantissa) << exponent)) / 256
>- *
>- */
>- div_exp = 0;
>- exponent = NIX_BPF_MAX_RATE_EXPONENT;
>- mantissa = NIX_BPF_MAX_RATE_MANTISSA;
>-
>- while (value < (NIX_BPF_RATE_CONST * (1 << exponent)))
>- exponent -= 1;
>-
>- while (value <
>- ((NIX_BPF_RATE_CONST * ((256 + mantissa) << exponent))
>/
>- 256))
>- mantissa -= 1;
>- }
>+ div_exp = 0;
>+ exponent = NIX_BPF_MAX_RATE_EXPONENT;
>+ mantissa = NIX_BPF_MAX_RATE_MANTISSA;
>+
>+ while (value < (NIX_BPF_RATE(time_ns, exponent, 0, 0)))
>+ exponent -= 1;
>+
>+ while (value < (NIX_BPF_RATE(time_ns, exponent, mantissa, 0)))
>+ mantissa -= 1;
>
> if (div_exp > NIX_BPF_MAX_RATE_DIV_EXP ||
> exponent > NIX_BPF_MAX_RATE_EXPONENT || @@ -94,7 +69,7
>@@ meter_rate_to_nix(uint64_t value, uint64_t *exponent_p, uint64_t
>*mantissa_p,
> *mantissa_p = mantissa;
>
> /* Calculate real rate value */
>- return NIX_BPF_RATE(time_us, exponent, mantissa, div_exp);
>+ return NIX_BPF_RATE(time_ns, exponent, mantissa, div_exp);
> }
>
> static inline uint64_t
>@@ -195,11 +170,7 @@ nix_precolor_conv_table_write(struct roc_nix
>*roc_nix, uint64_t val,
> int64_t *addr;
>
> addr = PLT_PTR_ADD(nix->base, off);
>- /* FIXME: Currently writing to this register throwing kernel dump.
>- * plt_write64(val, addr);
>- */
>- PLT_SET_USED(val);
>- PLT_SET_USED(addr);
>+ plt_write64(val, addr);
> }
>
> static uint8_t
>@@ -665,6 +636,7 @@ roc_nix_bpf_config(struct roc_nix *roc_nix, uint16_t
>id,
>
> aq->prof.lmode = cfg->lmode;
> aq->prof.icolor = cfg->icolor;
>+ aq->prof.meter_algo = cfg->alg;
> aq->prof.pc_mode = cfg->pc_mode;
> aq->prof.tnl_ena = cfg->tnl_ena;
> aq->prof.gc_action = cfg->action[ROC_NIX_BPF_COLOR_GREEN];
>@@ -673,6 +645,7 @@ roc_nix_bpf_config(struct roc_nix *roc_nix, uint16_t
>id,
>
> aq->prof_mask.lmode = ~(aq->prof_mask.lmode);
> aq->prof_mask.icolor = ~(aq->prof_mask.icolor);
>+ aq->prof_mask.meter_algo = ~(aq->prof_mask.meter_algo);
> aq->prof_mask.pc_mode = ~(aq->prof_mask.pc_mode);
> aq->prof_mask.tnl_ena = ~(aq->prof_mask.tnl_ena);
> aq->prof_mask.gc_action = ~(aq->prof_mask.gc_action);
>--
>2.25.1
Acked-by: Sunil Kumar Kori <skori@mavell.com>
^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: [PATCH 1/2] net/cnxk: update meter bpf ID in rq
2021-11-30 6:41 [PATCH 1/2] net/cnxk: update meter bpf ID in rq Rakesh Kudurumalla
2021-11-30 6:41 ` [PATCH 2/2] common/cnxk: update meter algorithm in band profile Rakesh Kudurumalla
@ 2021-11-30 7:16 ` Sunil Kumar Kori
2022-01-10 8:45 ` Jerin Jacob
2022-01-11 12:46 ` Ferruh Yigit
` (2 subsequent siblings)
4 siblings, 1 reply; 12+ messages in thread
From: Sunil Kumar Kori @ 2021-11-30 7:16 UTC (permalink / raw)
To: Rakesh Kudurumalla, Nithin Kumar Dabilpuram,
Kiran Kumar Kokkilagadda, Satha Koteswara Rao Kottidi
Cc: dev, Rakesh Kudurumalla
>-----Original Message-----
>From: Rakesh Kudurumalla <rkudurumalla@marvell.com>
>Sent: Tuesday, November 30, 2021 12:12 PM
>To: Nithin Kumar Dabilpuram <ndabilpuram@marvell.com>; Kiran Kumar
>Kokkilagadda <kirankumark@marvell.com>; Sunil Kumar Kori
><skori@marvell.com>; Satha Koteswara Rao Kottidi
><skoteshwar@marvell.com>
>Cc: dev@dpdk.org; Rakesh Kudurumalla <rkudurumalla@marvell.com>
>Subject: [PATCH 1/2] net/cnxk: update meter bpf ID in rq
>
>Patch updates configured meter bpf is in rq context during meter creation
>
>Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
>---
> drivers/net/cnxk/cn10k_rte_flow.c | 9 ++++-----
>drivers/net/cnxk/cnxk_ethdev_mtr.c | 25 ++++++++++++++++++-------
> 2 files changed, 22 insertions(+), 12 deletions(-)
>
>diff --git a/drivers/net/cnxk/cn10k_rte_flow.c
>b/drivers/net/cnxk/cn10k_rte_flow.c
>index b830abe63e..402bb1c72f 100644
>--- a/drivers/net/cnxk/cn10k_rte_flow.c
>+++ b/drivers/net/cnxk/cn10k_rte_flow.c
>@@ -36,20 +36,20 @@ cn10k_mtr_configure(struct rte_eth_dev *eth_dev,
> for (i = 0; actions[i].type != RTE_FLOW_ACTION_TYPE_END; i++) {
> if (actions[i].type == RTE_FLOW_ACTION_TYPE_METER) {
> mtr_conf = (const struct rte_flow_action_meter
>- *)(actions->conf);
>+ *)(actions[i].conf);
> mtr_id = mtr_conf->mtr_id;
> is_mtr_act = true;
> }
> if (actions[i].type == RTE_FLOW_ACTION_TYPE_QUEUE) {
> q_conf = (const struct rte_flow_action_queue
>- *)(actions->conf);
>+ *)(actions[i].conf);
> if (is_mtr_act)
> nix_mtr_rq_update(eth_dev, mtr_id, 1,
> &q_conf->index);
> }
> if (actions[i].type == RTE_FLOW_ACTION_TYPE_RSS) {
> rss_conf = (const struct rte_flow_action_rss
>- *)(actions->conf);
>+ *)(actions[i].conf);
> if (is_mtr_act)
> nix_mtr_rq_update(eth_dev, mtr_id,
> rss_conf->queue_num,
>@@ -98,7 +98,7 @@ cn10k_rss_action_validate(struct rte_eth_dev *eth_dev,
> return -EINVAL;
> }
>
>- if (eth_dev->data->dev_conf.rxmode.mq_mode !=
>RTE_ETH_MQ_RX_RSS) {
>+ if (eth_dev->data->dev_conf.rxmode.mq_mode != ETH_MQ_RX_RSS) {
> plt_err("multi-queue mode is disabled");
> return -ENOTSUP;
> }
>@@ -171,7 +171,6 @@ cn10k_flow_create(struct rte_eth_dev *eth_dev, const
>struct rte_flow_attr *attr,
> return NULL;
> }
> }
>-
> for (i = 0; actions[i].type != RTE_FLOW_ACTION_TYPE_END; i++) {
> if (actions[i].type == RTE_FLOW_ACTION_TYPE_METER) {
> mtr = (const struct rte_flow_action_meter *)actions[i]
>diff --git a/drivers/net/cnxk/cnxk_ethdev_mtr.c
>b/drivers/net/cnxk/cnxk_ethdev_mtr.c
>index 39d8563826..a36fcb8aaf 100644
>--- a/drivers/net/cnxk/cnxk_ethdev_mtr.c
>+++ b/drivers/net/cnxk/cnxk_ethdev_mtr.c
>@@ -35,7 +35,6 @@ static struct rte_mtr_capabilities mtr_capa = {
> .chaining_n_mtrs_per_flow_max = NIX_MTR_COUNT_PER_FLOW,
> .chaining_use_prev_mtr_color_supported = true,
> .chaining_use_prev_mtr_color_enforced = true,
>- .meter_rate_max = NIX_BPF_RATE_MAX / 8, /* Bytes per second */
> .color_aware_srtcm_rfc2697_supported = true,
> .color_aware_trtcm_rfc2698_supported = true,
> .color_aware_trtcm_rfc4115_supported = true, @@ -180,20 +179,20
>@@ cnxk_nix_mtr_capabilities_get(struct rte_eth_dev *dev,
> struct rte_mtr_capabilities *capa,
> struct rte_mtr_error *error)
> {
>- struct cnxk_eth_dev *eth_dev = cnxk_eth_pmd_priv(dev);
>- uint16_t count[ROC_NIX_BPF_LEVEL_MAX] = {0};
> uint8_t lvl_mask = ROC_NIX_BPF_LEVEL_F_LEAF |
>ROC_NIX_BPF_LEVEL_F_MID |
> ROC_NIX_BPF_LEVEL_F_TOP;
>+ struct cnxk_eth_dev *eth_dev = cnxk_eth_pmd_priv(dev);
>+ uint16_t count[ROC_NIX_BPF_LEVEL_MAX] = {0};
> struct roc_nix *nix = ð_dev->nix;
>- int rc;
>- int i;
>+ uint32_t time_unit;
>+ int rc, i;
>
> RTE_SET_USED(dev);
>
> if (!capa)
> return -rte_mtr_error_set(error, EINVAL,
>- RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
>- "NULL input parameter");
>+
>RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
>+ "NULL input parameter");
>
> rc = roc_nix_bpf_count_get(nix, lvl_mask, count);
> if (rc)
>@@ -207,6 +206,15 @@ cnxk_nix_mtr_capabilities_get(struct rte_eth_dev
>*dev,
> mtr_capa.meter_trtcm_rfc4115_n_max = mtr_capa.n_max;
> mtr_capa.meter_policy_n_max = mtr_capa.n_max;
>
>+ rc = roc_nix_bpf_timeunit_get(nix, &time_unit);
>+ if (rc)
>+ return rc;
>+
>+ mtr_capa.meter_rate_max =
>+ NIX_BPF_RATE(time_unit, NIX_BPF_MAX_RATE_EXPONENT,
>+ NIX_BPF_MAX_RATE_MANTISSA, 0) /
>+ 8;
>+
> *capa = mtr_capa;
> return 0;
> }
>@@ -304,6 +312,9 @@ cnxk_nix_mtr_policy_validate(struct rte_eth_dev
>*dev,
> if (action->type ==
>RTE_FLOW_ACTION_TYPE_DROP)
> supported[i] = true;
>
>+ if (action->type ==
>RTE_FLOW_ACTION_TYPE_VOID)
>+ supported[i] = true;
>+
> if (!supported[i]) {
> sprintf(message,
> "%s action is not valid",
>--
>2.25.1
Acked-by: Sunil Kumar Kori <skori@mavell.com>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] net/cnxk: update meter bpf ID in rq
2021-11-30 7:16 ` [PATCH 1/2] net/cnxk: update meter bpf ID in rq Sunil Kumar Kori
@ 2022-01-10 8:45 ` Jerin Jacob
0 siblings, 0 replies; 12+ messages in thread
From: Jerin Jacob @ 2022-01-10 8:45 UTC (permalink / raw)
To: Sunil Kumar Kori, Ferruh Yigit, Andrew Rybchenko
Cc: Rakesh Kudurumalla, Nithin Kumar Dabilpuram,
Kiran Kumar Kokkilagadda, Satha Koteswara Rao Kottidi, dev
On Tue, Nov 30, 2021 at 12:47 PM Sunil Kumar Kori <skori@marvell.com> wrote:
>
> >-----Original Message-----
> >From: Rakesh Kudurumalla <rkudurumalla@marvell.com>
> >Sent: Tuesday, November 30, 2021 12:12 PM
> >To: Nithin Kumar Dabilpuram <ndabilpuram@marvell.com>; Kiran Kumar
> >Kokkilagadda <kirankumark@marvell.com>; Sunil Kumar Kori
> ><skori@marvell.com>; Satha Koteswara Rao Kottidi
> ><skoteshwar@marvell.com>
> >Cc: dev@dpdk.org; Rakesh Kudurumalla <rkudurumalla@marvell.com>
> >Subject: [PATCH 1/2] net/cnxk: update meter bpf ID in rq
> >
> >Patch updates configured meter bpf is in rq context during meter creation
> >
> >Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Series applied to dpdk-next-net-mrvl/for-next-net. Thanks.
> >---
> > drivers/net/cnxk/cn10k_rte_flow.c | 9 ++++-----
> >drivers/net/cnxk/cnxk_ethdev_mtr.c | 25 ++++++++++++++++++-------
> > 2 files changed, 22 insertions(+), 12 deletions(-)
> >
> >diff --git a/drivers/net/cnxk/cn10k_rte_flow.c
> >b/drivers/net/cnxk/cn10k_rte_flow.c
> >index b830abe63e..402bb1c72f 100644
> >--- a/drivers/net/cnxk/cn10k_rte_flow.c
> >+++ b/drivers/net/cnxk/cn10k_rte_flow.c
> >@@ -36,20 +36,20 @@ cn10k_mtr_configure(struct rte_eth_dev *eth_dev,
> > for (i = 0; actions[i].type != RTE_FLOW_ACTION_TYPE_END; i++) {
> > if (actions[i].type == RTE_FLOW_ACTION_TYPE_METER) {
> > mtr_conf = (const struct rte_flow_action_meter
> >- *)(actions->conf);
> >+ *)(actions[i].conf);
> > mtr_id = mtr_conf->mtr_id;
> > is_mtr_act = true;
> > }
> > if (actions[i].type == RTE_FLOW_ACTION_TYPE_QUEUE) {
> > q_conf = (const struct rte_flow_action_queue
> >- *)(actions->conf);
> >+ *)(actions[i].conf);
> > if (is_mtr_act)
> > nix_mtr_rq_update(eth_dev, mtr_id, 1,
> > &q_conf->index);
> > }
> > if (actions[i].type == RTE_FLOW_ACTION_TYPE_RSS) {
> > rss_conf = (const struct rte_flow_action_rss
> >- *)(actions->conf);
> >+ *)(actions[i].conf);
> > if (is_mtr_act)
> > nix_mtr_rq_update(eth_dev, mtr_id,
> > rss_conf->queue_num,
> >@@ -98,7 +98,7 @@ cn10k_rss_action_validate(struct rte_eth_dev *eth_dev,
> > return -EINVAL;
> > }
> >
> >- if (eth_dev->data->dev_conf.rxmode.mq_mode !=
> >RTE_ETH_MQ_RX_RSS) {
> >+ if (eth_dev->data->dev_conf.rxmode.mq_mode != ETH_MQ_RX_RSS) {
> > plt_err("multi-queue mode is disabled");
> > return -ENOTSUP;
> > }
> >@@ -171,7 +171,6 @@ cn10k_flow_create(struct rte_eth_dev *eth_dev, const
> >struct rte_flow_attr *attr,
> > return NULL;
> > }
> > }
> >-
> > for (i = 0; actions[i].type != RTE_FLOW_ACTION_TYPE_END; i++) {
> > if (actions[i].type == RTE_FLOW_ACTION_TYPE_METER) {
> > mtr = (const struct rte_flow_action_meter *)actions[i]
> >diff --git a/drivers/net/cnxk/cnxk_ethdev_mtr.c
> >b/drivers/net/cnxk/cnxk_ethdev_mtr.c
> >index 39d8563826..a36fcb8aaf 100644
> >--- a/drivers/net/cnxk/cnxk_ethdev_mtr.c
> >+++ b/drivers/net/cnxk/cnxk_ethdev_mtr.c
> >@@ -35,7 +35,6 @@ static struct rte_mtr_capabilities mtr_capa = {
> > .chaining_n_mtrs_per_flow_max = NIX_MTR_COUNT_PER_FLOW,
> > .chaining_use_prev_mtr_color_supported = true,
> > .chaining_use_prev_mtr_color_enforced = true,
> >- .meter_rate_max = NIX_BPF_RATE_MAX / 8, /* Bytes per second */
> > .color_aware_srtcm_rfc2697_supported = true,
> > .color_aware_trtcm_rfc2698_supported = true,
> > .color_aware_trtcm_rfc4115_supported = true, @@ -180,20 +179,20
> >@@ cnxk_nix_mtr_capabilities_get(struct rte_eth_dev *dev,
> > struct rte_mtr_capabilities *capa,
> > struct rte_mtr_error *error)
> > {
> >- struct cnxk_eth_dev *eth_dev = cnxk_eth_pmd_priv(dev);
> >- uint16_t count[ROC_NIX_BPF_LEVEL_MAX] = {0};
> > uint8_t lvl_mask = ROC_NIX_BPF_LEVEL_F_LEAF |
> >ROC_NIX_BPF_LEVEL_F_MID |
> > ROC_NIX_BPF_LEVEL_F_TOP;
> >+ struct cnxk_eth_dev *eth_dev = cnxk_eth_pmd_priv(dev);
> >+ uint16_t count[ROC_NIX_BPF_LEVEL_MAX] = {0};
> > struct roc_nix *nix = ð_dev->nix;
> >- int rc;
> >- int i;
> >+ uint32_t time_unit;
> >+ int rc, i;
> >
> > RTE_SET_USED(dev);
> >
> > if (!capa)
> > return -rte_mtr_error_set(error, EINVAL,
> >- RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
> >- "NULL input parameter");
> >+
> >RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
> >+ "NULL input parameter");
> >
> > rc = roc_nix_bpf_count_get(nix, lvl_mask, count);
> > if (rc)
> >@@ -207,6 +206,15 @@ cnxk_nix_mtr_capabilities_get(struct rte_eth_dev
> >*dev,
> > mtr_capa.meter_trtcm_rfc4115_n_max = mtr_capa.n_max;
> > mtr_capa.meter_policy_n_max = mtr_capa.n_max;
> >
> >+ rc = roc_nix_bpf_timeunit_get(nix, &time_unit);
> >+ if (rc)
> >+ return rc;
> >+
> >+ mtr_capa.meter_rate_max =
> >+ NIX_BPF_RATE(time_unit, NIX_BPF_MAX_RATE_EXPONENT,
> >+ NIX_BPF_MAX_RATE_MANTISSA, 0) /
> >+ 8;
> >+
> > *capa = mtr_capa;
> > return 0;
> > }
> >@@ -304,6 +312,9 @@ cnxk_nix_mtr_policy_validate(struct rte_eth_dev
> >*dev,
> > if (action->type ==
> >RTE_FLOW_ACTION_TYPE_DROP)
> > supported[i] = true;
> >
> >+ if (action->type ==
> >RTE_FLOW_ACTION_TYPE_VOID)
> >+ supported[i] = true;
> >+
> > if (!supported[i]) {
> > sprintf(message,
> > "%s action is not valid",
> >--
> >2.25.1
>
> Acked-by: Sunil Kumar Kori <skori@mavell.com>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] net/cnxk: update meter bpf ID in rq
2021-11-30 6:41 [PATCH 1/2] net/cnxk: update meter bpf ID in rq Rakesh Kudurumalla
2021-11-30 6:41 ` [PATCH 2/2] common/cnxk: update meter algorithm in band profile Rakesh Kudurumalla
2021-11-30 7:16 ` [PATCH 1/2] net/cnxk: update meter bpf ID in rq Sunil Kumar Kori
@ 2022-01-11 12:46 ` Ferruh Yigit
2022-01-13 8:21 ` [EXT] " Rakesh Kudurumalla
2022-01-13 12:20 ` [PATCH v2 1/2] net/cnxk: update meter bpf ID in Recevie Queue Rakesh Kudurumalla
2022-01-13 12:28 ` [PATCH v3 1/2] net/cnxk: update meter bpf ID in Receive Queue Rakesh Kudurumalla
4 siblings, 1 reply; 12+ messages in thread
From: Ferruh Yigit @ 2022-01-11 12:46 UTC (permalink / raw)
To: Rakesh Kudurumalla, Nithin Dabilpuram, Kiran Kumar K,
Sunil Kumar Kori, Satha Rao
Cc: dev
On 11/30/2021 6:41 AM, Rakesh Kudurumalla wrote:
> Patch updates configured meter bpf is in rq context
> during meter creation
RQ is receive queue, right? Can you please use the long version for clarification?
>
> Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
> ---
> drivers/net/cnxk/cn10k_rte_flow.c | 9 ++++-----
> drivers/net/cnxk/cnxk_ethdev_mtr.c | 25 ++++++++++++++++++-------
> 2 files changed, 22 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/net/cnxk/cn10k_rte_flow.c b/drivers/net/cnxk/cn10k_rte_flow.c
> index b830abe63e..402bb1c72f 100644
> --- a/drivers/net/cnxk/cn10k_rte_flow.c
> +++ b/drivers/net/cnxk/cn10k_rte_flow.c
> @@ -36,20 +36,20 @@ cn10k_mtr_configure(struct rte_eth_dev *eth_dev,
> for (i = 0; actions[i].type != RTE_FLOW_ACTION_TYPE_END; i++) {
> if (actions[i].type == RTE_FLOW_ACTION_TYPE_METER) {
> mtr_conf = (const struct rte_flow_action_meter
> - *)(actions->conf);
> + *)(actions[i].conf);
> mtr_id = mtr_conf->mtr_id;
> is_mtr_act = true;
> }
> if (actions[i].type == RTE_FLOW_ACTION_TYPE_QUEUE) {
> q_conf = (const struct rte_flow_action_queue
> - *)(actions->conf);
> + *)(actions[i].conf);
> if (is_mtr_act)
> nix_mtr_rq_update(eth_dev, mtr_id, 1,
> &q_conf->index);
> }
> if (actions[i].type == RTE_FLOW_ACTION_TYPE_RSS) {
> rss_conf = (const struct rte_flow_action_rss
> - *)(actions->conf);
> + *)(actions[i].conf);
> if (is_mtr_act)
> nix_mtr_rq_update(eth_dev, mtr_id,
> rss_conf->queue_num,
> @@ -98,7 +98,7 @@ cn10k_rss_action_validate(struct rte_eth_dev *eth_dev,
> return -EINVAL;
> }
>
> - if (eth_dev->data->dev_conf.rxmode.mq_mode != RTE_ETH_MQ_RX_RSS) {
> + if (eth_dev->data->dev_conf.rxmode.mq_mode != ETH_MQ_RX_RSS) {
This change seems unintended. Please keep the original value.
<...>
> if (!capa)
> return -rte_mtr_error_set(error, EINVAL,
> - RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
> - "NULL input parameter");
> + RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
> + "NULL input parameter");
>
Previous indentation looks more consistent with DPDK coding guide.
^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: [EXT] Re: [PATCH 1/2] net/cnxk: update meter bpf ID in rq
2022-01-11 12:46 ` Ferruh Yigit
@ 2022-01-13 8:21 ` Rakesh Kudurumalla
0 siblings, 0 replies; 12+ messages in thread
From: Rakesh Kudurumalla @ 2022-01-13 8:21 UTC (permalink / raw)
To: Ferruh Yigit, Nithin Kumar Dabilpuram, Kiran Kumar Kokkilagadda,
Sunil Kumar Kori, Satha Koteswara Rao Kottidi
Cc: dev
> -----Original Message-----
> From: Ferruh Yigit <ferruh.yigit@intel.com>
> Sent: Tuesday, January 11, 2022 6:16 PM
> To: Rakesh Kudurumalla <rkudurumalla@marvell.com>; Nithin Kumar
> Dabilpuram <ndabilpuram@marvell.com>; Kiran Kumar Kokkilagadda
> <kirankumark@marvell.com>; Sunil Kumar Kori <skori@marvell.com>; Satha
> Koteswara Rao Kottidi <skoteshwar@marvell.com>
> Cc: dev@dpdk.org
> Subject: [EXT] Re: [PATCH 1/2] net/cnxk: update meter bpf ID in rq
>
> External Email
>
> ----------------------------------------------------------------------
> On 11/30/2021 6:41 AM, Rakesh Kudurumalla wrote:
> > Patch updates configured meter bpf is in rq context during meter
> > creation
>
> RQ is receive queue, right? Can you please use the long version for
> clarification?
Yes RQ is receive queue. Sure will use long version
>
> >
> > Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
> > ---
> > drivers/net/cnxk/cn10k_rte_flow.c | 9 ++++-----
> > drivers/net/cnxk/cnxk_ethdev_mtr.c | 25 ++++++++++++++++++-------
> > 2 files changed, 22 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/net/cnxk/cn10k_rte_flow.c
> > b/drivers/net/cnxk/cn10k_rte_flow.c
> > index b830abe63e..402bb1c72f 100644
> > --- a/drivers/net/cnxk/cn10k_rte_flow.c
> > +++ b/drivers/net/cnxk/cn10k_rte_flow.c
> > @@ -36,20 +36,20 @@ cn10k_mtr_configure(struct rte_eth_dev *eth_dev,
> > for (i = 0; actions[i].type != RTE_FLOW_ACTION_TYPE_END; i++) {
> > if (actions[i].type == RTE_FLOW_ACTION_TYPE_METER) {
> > mtr_conf = (const struct rte_flow_action_meter
> > - *)(actions->conf);
> > + *)(actions[i].conf);
> > mtr_id = mtr_conf->mtr_id;
> > is_mtr_act = true;
> > }
> > if (actions[i].type == RTE_FLOW_ACTION_TYPE_QUEUE) {
> > q_conf = (const struct rte_flow_action_queue
> > - *)(actions->conf);
> > + *)(actions[i].conf);
> > if (is_mtr_act)
> > nix_mtr_rq_update(eth_dev, mtr_id, 1,
> > &q_conf->index);
> > }
> > if (actions[i].type == RTE_FLOW_ACTION_TYPE_RSS) {
> > rss_conf = (const struct rte_flow_action_rss
> > - *)(actions->conf);
> > + *)(actions[i].conf);
> > if (is_mtr_act)
> > nix_mtr_rq_update(eth_dev, mtr_id,
> > rss_conf->queue_num,
> > @@ -98,7 +98,7 @@ cn10k_rss_action_validate(struct rte_eth_dev
> *eth_dev,
> > return -EINVAL;
> > }
> >
> > - if (eth_dev->data->dev_conf.rxmode.mq_mode !=
> RTE_ETH_MQ_RX_RSS) {
> > + if (eth_dev->data->dev_conf.rxmode.mq_mode != ETH_MQ_RX_RSS)
> {
>
> This change seems unintended. Please keep the original value.
Will keep original value
>
>
>
> <...>
>
> > if (!capa)
> > return -rte_mtr_error_set(error, EINVAL,
> > - RTE_MTR_ERROR_TYPE_MTR_PARAMS,
> NULL,
> > - "NULL input parameter");
> > +
> RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
> > + "NULL input parameter");
> >
>
> Previous indentation looks more consistent with DPDK coding guide.
Will update to pervious indentation
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 1/2] net/cnxk: update meter bpf ID in Recevie Queue
2021-11-30 6:41 [PATCH 1/2] net/cnxk: update meter bpf ID in rq Rakesh Kudurumalla
` (2 preceding siblings ...)
2022-01-11 12:46 ` Ferruh Yigit
@ 2022-01-13 12:20 ` Rakesh Kudurumalla
2022-01-13 12:20 ` [PATCH v2 2/2] common/cnxk: update meter algorithm in band profile Rakesh Kudurumalla
2022-01-13 12:28 ` [PATCH v3 1/2] net/cnxk: update meter bpf ID in Receive Queue Rakesh Kudurumalla
4 siblings, 1 reply; 12+ messages in thread
From: Rakesh Kudurumalla @ 2022-01-13 12:20 UTC (permalink / raw)
To: jerinj, Nithin Dabilpuram, Kiran Kumar K, Sunil Kumar Kori, Satha Rao
Cc: dev, Rakesh Kudurumalla, Sunil Kumar Kori
Patch updates configured meter bpf is in recevie queue
context during meter creation
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Sunil Kumar Kori <skori@mavell.com>
---
v2: Fix commit message
drivers/net/cnxk/cn10k_rte_flow.c | 7 +++----
drivers/net/cnxk/cnxk_ethdev_mtr.c | 21 ++++++++++++++++-----
2 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/net/cnxk/cn10k_rte_flow.c b/drivers/net/cnxk/cn10k_rte_flow.c
index b830abe63e..529fb0e4b7 100644
--- a/drivers/net/cnxk/cn10k_rte_flow.c
+++ b/drivers/net/cnxk/cn10k_rte_flow.c
@@ -36,20 +36,20 @@ cn10k_mtr_configure(struct rte_eth_dev *eth_dev,
for (i = 0; actions[i].type != RTE_FLOW_ACTION_TYPE_END; i++) {
if (actions[i].type == RTE_FLOW_ACTION_TYPE_METER) {
mtr_conf = (const struct rte_flow_action_meter
- *)(actions->conf);
+ *)(actions[i].conf);
mtr_id = mtr_conf->mtr_id;
is_mtr_act = true;
}
if (actions[i].type == RTE_FLOW_ACTION_TYPE_QUEUE) {
q_conf = (const struct rte_flow_action_queue
- *)(actions->conf);
+ *)(actions[i].conf);
if (is_mtr_act)
nix_mtr_rq_update(eth_dev, mtr_id, 1,
&q_conf->index);
}
if (actions[i].type == RTE_FLOW_ACTION_TYPE_RSS) {
rss_conf = (const struct rte_flow_action_rss
- *)(actions->conf);
+ *)(actions[i].conf);
if (is_mtr_act)
nix_mtr_rq_update(eth_dev, mtr_id,
rss_conf->queue_num,
@@ -171,7 +171,6 @@ cn10k_flow_create(struct rte_eth_dev *eth_dev, const struct rte_flow_attr *attr,
return NULL;
}
}
-
for (i = 0; actions[i].type != RTE_FLOW_ACTION_TYPE_END; i++) {
if (actions[i].type == RTE_FLOW_ACTION_TYPE_METER) {
mtr = (const struct rte_flow_action_meter *)actions[i]
diff --git a/drivers/net/cnxk/cnxk_ethdev_mtr.c b/drivers/net/cnxk/cnxk_ethdev_mtr.c
index 39d8563826..cc783e5f86 100644
--- a/drivers/net/cnxk/cnxk_ethdev_mtr.c
+++ b/drivers/net/cnxk/cnxk_ethdev_mtr.c
@@ -35,7 +35,6 @@ static struct rte_mtr_capabilities mtr_capa = {
.chaining_n_mtrs_per_flow_max = NIX_MTR_COUNT_PER_FLOW,
.chaining_use_prev_mtr_color_supported = true,
.chaining_use_prev_mtr_color_enforced = true,
- .meter_rate_max = NIX_BPF_RATE_MAX / 8, /* Bytes per second */
.color_aware_srtcm_rfc2697_supported = true,
.color_aware_trtcm_rfc2698_supported = true,
.color_aware_trtcm_rfc4115_supported = true,
@@ -180,13 +179,13 @@ cnxk_nix_mtr_capabilities_get(struct rte_eth_dev *dev,
struct rte_mtr_capabilities *capa,
struct rte_mtr_error *error)
{
- struct cnxk_eth_dev *eth_dev = cnxk_eth_pmd_priv(dev);
- uint16_t count[ROC_NIX_BPF_LEVEL_MAX] = {0};
uint8_t lvl_mask = ROC_NIX_BPF_LEVEL_F_LEAF | ROC_NIX_BPF_LEVEL_F_MID |
ROC_NIX_BPF_LEVEL_F_TOP;
+ struct cnxk_eth_dev *eth_dev = cnxk_eth_pmd_priv(dev);
+ uint16_t count[ROC_NIX_BPF_LEVEL_MAX] = {0};
struct roc_nix *nix = ð_dev->nix;
- int rc;
- int i;
+ uint32_t time_unit;
+ int rc, i;
RTE_SET_USED(dev);
@@ -207,6 +206,15 @@ cnxk_nix_mtr_capabilities_get(struct rte_eth_dev *dev,
mtr_capa.meter_trtcm_rfc4115_n_max = mtr_capa.n_max;
mtr_capa.meter_policy_n_max = mtr_capa.n_max;
+ rc = roc_nix_bpf_timeunit_get(nix, &time_unit);
+ if (rc)
+ return rc;
+
+ mtr_capa.meter_rate_max =
+ NIX_BPF_RATE(time_unit, NIX_BPF_MAX_RATE_EXPONENT,
+ NIX_BPF_MAX_RATE_MANTISSA, 0) /
+ 8;
+
*capa = mtr_capa;
return 0;
}
@@ -304,6 +312,9 @@ cnxk_nix_mtr_policy_validate(struct rte_eth_dev *dev,
if (action->type == RTE_FLOW_ACTION_TYPE_DROP)
supported[i] = true;
+ if (action->type == RTE_FLOW_ACTION_TYPE_VOID)
+ supported[i] = true;
+
if (!supported[i]) {
sprintf(message,
"%s action is not valid",
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 2/2] common/cnxk: update meter algorithm in band profile
2022-01-13 12:20 ` [PATCH v2 1/2] net/cnxk: update meter bpf ID in Recevie Queue Rakesh Kudurumalla
@ 2022-01-13 12:20 ` Rakesh Kudurumalla
0 siblings, 0 replies; 12+ messages in thread
From: Rakesh Kudurumalla @ 2022-01-13 12:20 UTC (permalink / raw)
To: jerinj, Nithin Dabilpuram, Kiran Kumar K, Sunil Kumar Kori, Satha Rao
Cc: dev, Rakesh Kudurumalla, Sunil Kumar Kori
Patch updates meter algorithm in nix band profile
structure
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Sunil Kumar Kori <skori@mavell.com>
---
v2: series patch of 1/2
drivers/common/cnxk/hw/nix.h | 5 ---
drivers/common/cnxk/roc_nix_bpf.c | 61 +++++++++----------------------
2 files changed, 17 insertions(+), 49 deletions(-)
diff --git a/drivers/common/cnxk/hw/nix.h b/drivers/common/cnxk/hw/nix.h
index dd2ebecc6a..6931f1d1d2 100644
--- a/drivers/common/cnxk/hw/nix.h
+++ b/drivers/common/cnxk/hw/nix.h
@@ -2133,11 +2133,6 @@ struct nix_lso_format {
((NIX_BPF_RATE_CONST * ((256 + (mantissa)) << (exponent))) / \
(((1ull << (div_exp)) * 256 * policer_timeunit)))
-/* Meter rate limits in Bits/Sec */
-#define NIX_BPF_RATE_MIN NIX_BPF_RATE(1000000000, 0, 0, 0)
-#define NIX_BPF_RATE_MAX \
- NIX_BPF_RATE(1, NIX_BPF_MAX_RATE_EXPONENT, NIX_BPF_MAX_RATE_MANTISSA, 0)
-
#define NIX_BPF_DEFAULT_ADJUST_MANTISSA 511
#define NIX_BPF_DEFAULT_ADJUST_EXPONENT 0
diff --git a/drivers/common/cnxk/roc_nix_bpf.c b/drivers/common/cnxk/roc_nix_bpf.c
index 6996a54be0..46ed91e87b 100644
--- a/drivers/common/cnxk/roc_nix_bpf.c
+++ b/drivers/common/cnxk/roc_nix_bpf.c
@@ -38,48 +38,23 @@ meter_rate_to_nix(uint64_t value, uint64_t *exponent_p, uint64_t *mantissa_p,
uint64_t *div_exp_p, uint32_t timeunit_p)
{
uint64_t div_exp, exponent, mantissa;
- uint32_t time_us = timeunit_p;
+ uint32_t time_ns = timeunit_p;
/* Boundary checks */
- if (value < NIX_BPF_RATE_MIN || value > NIX_BPF_RATE_MAX)
+ if (value < NIX_BPF_RATE(time_ns, 0, 0, 0) ||
+ value > NIX_BPF_RATE(time_ns, NIX_BPF_MAX_RATE_EXPONENT,
+ NIX_BPF_MAX_RATE_MANTISSA, 0))
return 0;
- if (value <= NIX_BPF_RATE(time_us, 0, 0, 0)) {
- /* Calculate rate div_exp and mantissa using
- * the following formula:
- *
- * value = (2E6 * (256 + mantissa)
- * / ((1 << div_exp) * 256))
- */
- div_exp = 0;
- exponent = 0;
- mantissa = NIX_BPF_MAX_RATE_MANTISSA;
-
- while (value < (NIX_BPF_RATE_CONST / (1 << div_exp)))
- div_exp += 1;
-
- while (value < ((NIX_BPF_RATE_CONST * (256 + mantissa)) /
- ((1 << div_exp) * 256)))
- mantissa -= 1;
- } else {
- /* Calculate rate exponent and mantissa using
- * the following formula:
- *
- * value = (2E6 * ((256 + mantissa) << exponent)) / 256
- *
- */
- div_exp = 0;
- exponent = NIX_BPF_MAX_RATE_EXPONENT;
- mantissa = NIX_BPF_MAX_RATE_MANTISSA;
-
- while (value < (NIX_BPF_RATE_CONST * (1 << exponent)))
- exponent -= 1;
-
- while (value <
- ((NIX_BPF_RATE_CONST * ((256 + mantissa) << exponent)) /
- 256))
- mantissa -= 1;
- }
+ div_exp = 0;
+ exponent = NIX_BPF_MAX_RATE_EXPONENT;
+ mantissa = NIX_BPF_MAX_RATE_MANTISSA;
+
+ while (value < (NIX_BPF_RATE(time_ns, exponent, 0, 0)))
+ exponent -= 1;
+
+ while (value < (NIX_BPF_RATE(time_ns, exponent, mantissa, 0)))
+ mantissa -= 1;
if (div_exp > NIX_BPF_MAX_RATE_DIV_EXP ||
exponent > NIX_BPF_MAX_RATE_EXPONENT ||
@@ -94,7 +69,7 @@ meter_rate_to_nix(uint64_t value, uint64_t *exponent_p, uint64_t *mantissa_p,
*mantissa_p = mantissa;
/* Calculate real rate value */
- return NIX_BPF_RATE(time_us, exponent, mantissa, div_exp);
+ return NIX_BPF_RATE(time_ns, exponent, mantissa, div_exp);
}
static inline uint64_t
@@ -195,11 +170,7 @@ nix_precolor_conv_table_write(struct roc_nix *roc_nix, uint64_t val,
int64_t *addr;
addr = PLT_PTR_ADD(nix->base, off);
- /* FIXME: Currently writing to this register throwing kernel dump.
- * plt_write64(val, addr);
- */
- PLT_SET_USED(val);
- PLT_SET_USED(addr);
+ plt_write64(val, addr);
}
static uint8_t
@@ -665,6 +636,7 @@ roc_nix_bpf_config(struct roc_nix *roc_nix, uint16_t id,
aq->prof.lmode = cfg->lmode;
aq->prof.icolor = cfg->icolor;
+ aq->prof.meter_algo = cfg->alg;
aq->prof.pc_mode = cfg->pc_mode;
aq->prof.tnl_ena = cfg->tnl_ena;
aq->prof.gc_action = cfg->action[ROC_NIX_BPF_COLOR_GREEN];
@@ -673,6 +645,7 @@ roc_nix_bpf_config(struct roc_nix *roc_nix, uint16_t id,
aq->prof_mask.lmode = ~(aq->prof_mask.lmode);
aq->prof_mask.icolor = ~(aq->prof_mask.icolor);
+ aq->prof_mask.meter_algo = ~(aq->prof_mask.meter_algo);
aq->prof_mask.pc_mode = ~(aq->prof_mask.pc_mode);
aq->prof_mask.tnl_ena = ~(aq->prof_mask.tnl_ena);
aq->prof_mask.gc_action = ~(aq->prof_mask.gc_action);
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v3 1/2] net/cnxk: update meter bpf ID in Receive Queue
2021-11-30 6:41 [PATCH 1/2] net/cnxk: update meter bpf ID in rq Rakesh Kudurumalla
` (3 preceding siblings ...)
2022-01-13 12:20 ` [PATCH v2 1/2] net/cnxk: update meter bpf ID in Recevie Queue Rakesh Kudurumalla
@ 2022-01-13 12:28 ` Rakesh Kudurumalla
2022-01-13 12:28 ` [PATCH v3 2/2] common/cnxk: update meter algorithm in band profile Rakesh Kudurumalla
2022-01-20 8:43 ` [PATCH v3 1/2] net/cnxk: update meter bpf ID in Receive Queue Jerin Jacob
4 siblings, 2 replies; 12+ messages in thread
From: Rakesh Kudurumalla @ 2022-01-13 12:28 UTC (permalink / raw)
To: jerinj, Nithin Dabilpuram, Kiran Kumar K, Sunil Kumar Kori, Satha Rao
Cc: dev, Rakesh Kudurumalla, Sunil Kumar Kori
Patch updates configured meter bpf is in receive queue
context during meter creation
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Sunil Kumar Kori <skori@mavell.com>
---
v3: Fix commit message spelling
drivers/net/cnxk/cn10k_rte_flow.c | 7 +++----
drivers/net/cnxk/cnxk_ethdev_mtr.c | 21 ++++++++++++++++-----
2 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/net/cnxk/cn10k_rte_flow.c b/drivers/net/cnxk/cn10k_rte_flow.c
index b830abe63e..529fb0e4b7 100644
--- a/drivers/net/cnxk/cn10k_rte_flow.c
+++ b/drivers/net/cnxk/cn10k_rte_flow.c
@@ -36,20 +36,20 @@ cn10k_mtr_configure(struct rte_eth_dev *eth_dev,
for (i = 0; actions[i].type != RTE_FLOW_ACTION_TYPE_END; i++) {
if (actions[i].type == RTE_FLOW_ACTION_TYPE_METER) {
mtr_conf = (const struct rte_flow_action_meter
- *)(actions->conf);
+ *)(actions[i].conf);
mtr_id = mtr_conf->mtr_id;
is_mtr_act = true;
}
if (actions[i].type == RTE_FLOW_ACTION_TYPE_QUEUE) {
q_conf = (const struct rte_flow_action_queue
- *)(actions->conf);
+ *)(actions[i].conf);
if (is_mtr_act)
nix_mtr_rq_update(eth_dev, mtr_id, 1,
&q_conf->index);
}
if (actions[i].type == RTE_FLOW_ACTION_TYPE_RSS) {
rss_conf = (const struct rte_flow_action_rss
- *)(actions->conf);
+ *)(actions[i].conf);
if (is_mtr_act)
nix_mtr_rq_update(eth_dev, mtr_id,
rss_conf->queue_num,
@@ -171,7 +171,6 @@ cn10k_flow_create(struct rte_eth_dev *eth_dev, const struct rte_flow_attr *attr,
return NULL;
}
}
-
for (i = 0; actions[i].type != RTE_FLOW_ACTION_TYPE_END; i++) {
if (actions[i].type == RTE_FLOW_ACTION_TYPE_METER) {
mtr = (const struct rte_flow_action_meter *)actions[i]
diff --git a/drivers/net/cnxk/cnxk_ethdev_mtr.c b/drivers/net/cnxk/cnxk_ethdev_mtr.c
index 39d8563826..cc783e5f86 100644
--- a/drivers/net/cnxk/cnxk_ethdev_mtr.c
+++ b/drivers/net/cnxk/cnxk_ethdev_mtr.c
@@ -35,7 +35,6 @@ static struct rte_mtr_capabilities mtr_capa = {
.chaining_n_mtrs_per_flow_max = NIX_MTR_COUNT_PER_FLOW,
.chaining_use_prev_mtr_color_supported = true,
.chaining_use_prev_mtr_color_enforced = true,
- .meter_rate_max = NIX_BPF_RATE_MAX / 8, /* Bytes per second */
.color_aware_srtcm_rfc2697_supported = true,
.color_aware_trtcm_rfc2698_supported = true,
.color_aware_trtcm_rfc4115_supported = true,
@@ -180,13 +179,13 @@ cnxk_nix_mtr_capabilities_get(struct rte_eth_dev *dev,
struct rte_mtr_capabilities *capa,
struct rte_mtr_error *error)
{
- struct cnxk_eth_dev *eth_dev = cnxk_eth_pmd_priv(dev);
- uint16_t count[ROC_NIX_BPF_LEVEL_MAX] = {0};
uint8_t lvl_mask = ROC_NIX_BPF_LEVEL_F_LEAF | ROC_NIX_BPF_LEVEL_F_MID |
ROC_NIX_BPF_LEVEL_F_TOP;
+ struct cnxk_eth_dev *eth_dev = cnxk_eth_pmd_priv(dev);
+ uint16_t count[ROC_NIX_BPF_LEVEL_MAX] = {0};
struct roc_nix *nix = ð_dev->nix;
- int rc;
- int i;
+ uint32_t time_unit;
+ int rc, i;
RTE_SET_USED(dev);
@@ -207,6 +206,15 @@ cnxk_nix_mtr_capabilities_get(struct rte_eth_dev *dev,
mtr_capa.meter_trtcm_rfc4115_n_max = mtr_capa.n_max;
mtr_capa.meter_policy_n_max = mtr_capa.n_max;
+ rc = roc_nix_bpf_timeunit_get(nix, &time_unit);
+ if (rc)
+ return rc;
+
+ mtr_capa.meter_rate_max =
+ NIX_BPF_RATE(time_unit, NIX_BPF_MAX_RATE_EXPONENT,
+ NIX_BPF_MAX_RATE_MANTISSA, 0) /
+ 8;
+
*capa = mtr_capa;
return 0;
}
@@ -304,6 +312,9 @@ cnxk_nix_mtr_policy_validate(struct rte_eth_dev *dev,
if (action->type == RTE_FLOW_ACTION_TYPE_DROP)
supported[i] = true;
+ if (action->type == RTE_FLOW_ACTION_TYPE_VOID)
+ supported[i] = true;
+
if (!supported[i]) {
sprintf(message,
"%s action is not valid",
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v3 2/2] common/cnxk: update meter algorithm in band profile
2022-01-13 12:28 ` [PATCH v3 1/2] net/cnxk: update meter bpf ID in Receive Queue Rakesh Kudurumalla
@ 2022-01-13 12:28 ` Rakesh Kudurumalla
2022-01-20 8:43 ` [PATCH v3 1/2] net/cnxk: update meter bpf ID in Receive Queue Jerin Jacob
1 sibling, 0 replies; 12+ messages in thread
From: Rakesh Kudurumalla @ 2022-01-13 12:28 UTC (permalink / raw)
To: jerinj, Nithin Dabilpuram, Kiran Kumar K, Sunil Kumar Kori, Satha Rao
Cc: dev, Rakesh Kudurumalla, Sunil Kumar Kori
Patch updates meter algorithm in nix band profile
structure
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Sunil Kumar Kori <skori@mavell.com>
---
v3: series patch of 1/2
drivers/common/cnxk/hw/nix.h | 5 ---
drivers/common/cnxk/roc_nix_bpf.c | 61 +++++++++----------------------
2 files changed, 17 insertions(+), 49 deletions(-)
diff --git a/drivers/common/cnxk/hw/nix.h b/drivers/common/cnxk/hw/nix.h
index dd2ebecc6a..6931f1d1d2 100644
--- a/drivers/common/cnxk/hw/nix.h
+++ b/drivers/common/cnxk/hw/nix.h
@@ -2133,11 +2133,6 @@ struct nix_lso_format {
((NIX_BPF_RATE_CONST * ((256 + (mantissa)) << (exponent))) / \
(((1ull << (div_exp)) * 256 * policer_timeunit)))
-/* Meter rate limits in Bits/Sec */
-#define NIX_BPF_RATE_MIN NIX_BPF_RATE(1000000000, 0, 0, 0)
-#define NIX_BPF_RATE_MAX \
- NIX_BPF_RATE(1, NIX_BPF_MAX_RATE_EXPONENT, NIX_BPF_MAX_RATE_MANTISSA, 0)
-
#define NIX_BPF_DEFAULT_ADJUST_MANTISSA 511
#define NIX_BPF_DEFAULT_ADJUST_EXPONENT 0
diff --git a/drivers/common/cnxk/roc_nix_bpf.c b/drivers/common/cnxk/roc_nix_bpf.c
index 6996a54be0..46ed91e87b 100644
--- a/drivers/common/cnxk/roc_nix_bpf.c
+++ b/drivers/common/cnxk/roc_nix_bpf.c
@@ -38,48 +38,23 @@ meter_rate_to_nix(uint64_t value, uint64_t *exponent_p, uint64_t *mantissa_p,
uint64_t *div_exp_p, uint32_t timeunit_p)
{
uint64_t div_exp, exponent, mantissa;
- uint32_t time_us = timeunit_p;
+ uint32_t time_ns = timeunit_p;
/* Boundary checks */
- if (value < NIX_BPF_RATE_MIN || value > NIX_BPF_RATE_MAX)
+ if (value < NIX_BPF_RATE(time_ns, 0, 0, 0) ||
+ value > NIX_BPF_RATE(time_ns, NIX_BPF_MAX_RATE_EXPONENT,
+ NIX_BPF_MAX_RATE_MANTISSA, 0))
return 0;
- if (value <= NIX_BPF_RATE(time_us, 0, 0, 0)) {
- /* Calculate rate div_exp and mantissa using
- * the following formula:
- *
- * value = (2E6 * (256 + mantissa)
- * / ((1 << div_exp) * 256))
- */
- div_exp = 0;
- exponent = 0;
- mantissa = NIX_BPF_MAX_RATE_MANTISSA;
-
- while (value < (NIX_BPF_RATE_CONST / (1 << div_exp)))
- div_exp += 1;
-
- while (value < ((NIX_BPF_RATE_CONST * (256 + mantissa)) /
- ((1 << div_exp) * 256)))
- mantissa -= 1;
- } else {
- /* Calculate rate exponent and mantissa using
- * the following formula:
- *
- * value = (2E6 * ((256 + mantissa) << exponent)) / 256
- *
- */
- div_exp = 0;
- exponent = NIX_BPF_MAX_RATE_EXPONENT;
- mantissa = NIX_BPF_MAX_RATE_MANTISSA;
-
- while (value < (NIX_BPF_RATE_CONST * (1 << exponent)))
- exponent -= 1;
-
- while (value <
- ((NIX_BPF_RATE_CONST * ((256 + mantissa) << exponent)) /
- 256))
- mantissa -= 1;
- }
+ div_exp = 0;
+ exponent = NIX_BPF_MAX_RATE_EXPONENT;
+ mantissa = NIX_BPF_MAX_RATE_MANTISSA;
+
+ while (value < (NIX_BPF_RATE(time_ns, exponent, 0, 0)))
+ exponent -= 1;
+
+ while (value < (NIX_BPF_RATE(time_ns, exponent, mantissa, 0)))
+ mantissa -= 1;
if (div_exp > NIX_BPF_MAX_RATE_DIV_EXP ||
exponent > NIX_BPF_MAX_RATE_EXPONENT ||
@@ -94,7 +69,7 @@ meter_rate_to_nix(uint64_t value, uint64_t *exponent_p, uint64_t *mantissa_p,
*mantissa_p = mantissa;
/* Calculate real rate value */
- return NIX_BPF_RATE(time_us, exponent, mantissa, div_exp);
+ return NIX_BPF_RATE(time_ns, exponent, mantissa, div_exp);
}
static inline uint64_t
@@ -195,11 +170,7 @@ nix_precolor_conv_table_write(struct roc_nix *roc_nix, uint64_t val,
int64_t *addr;
addr = PLT_PTR_ADD(nix->base, off);
- /* FIXME: Currently writing to this register throwing kernel dump.
- * plt_write64(val, addr);
- */
- PLT_SET_USED(val);
- PLT_SET_USED(addr);
+ plt_write64(val, addr);
}
static uint8_t
@@ -665,6 +636,7 @@ roc_nix_bpf_config(struct roc_nix *roc_nix, uint16_t id,
aq->prof.lmode = cfg->lmode;
aq->prof.icolor = cfg->icolor;
+ aq->prof.meter_algo = cfg->alg;
aq->prof.pc_mode = cfg->pc_mode;
aq->prof.tnl_ena = cfg->tnl_ena;
aq->prof.gc_action = cfg->action[ROC_NIX_BPF_COLOR_GREEN];
@@ -673,6 +645,7 @@ roc_nix_bpf_config(struct roc_nix *roc_nix, uint16_t id,
aq->prof_mask.lmode = ~(aq->prof_mask.lmode);
aq->prof_mask.icolor = ~(aq->prof_mask.icolor);
+ aq->prof_mask.meter_algo = ~(aq->prof_mask.meter_algo);
aq->prof_mask.pc_mode = ~(aq->prof_mask.pc_mode);
aq->prof_mask.tnl_ena = ~(aq->prof_mask.tnl_ena);
aq->prof_mask.gc_action = ~(aq->prof_mask.gc_action);
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v3 1/2] net/cnxk: update meter bpf ID in Receive Queue
2022-01-13 12:28 ` [PATCH v3 1/2] net/cnxk: update meter bpf ID in Receive Queue Rakesh Kudurumalla
2022-01-13 12:28 ` [PATCH v3 2/2] common/cnxk: update meter algorithm in band profile Rakesh Kudurumalla
@ 2022-01-20 8:43 ` Jerin Jacob
1 sibling, 0 replies; 12+ messages in thread
From: Jerin Jacob @ 2022-01-20 8:43 UTC (permalink / raw)
To: Rakesh Kudurumalla, Ferruh Yigit
Cc: Jerin Jacob, Nithin Dabilpuram, Kiran Kumar K, Sunil Kumar Kori,
Satha Rao, dpdk-dev, Sunil Kumar Kori
On Thu, Jan 13, 2022 at 5:58 PM Rakesh Kudurumalla
<rkudurumalla@marvell.com> wrote:
>
> Patch updates configured meter bpf is in receive queue
> context during meter creation
>
> Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
> Acked-by: Sunil Kumar Kori <skori@mavell.com>
Series Acked-by: Jerin Jacob <jerinj@marvell.com>
Series applied to dpdk-next-net-mrvl/for-next-net with following git
log update. Thanks.
Author: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Date: Thu Jan 13 17:58:07 2022 +0530
common/cnxk: update meter algorithm in band profile
Update meter algorithm in NIX's band profile structure.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Sunil Kumar Kori <skori@mavell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Author: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Date: Thu Jan 13 17:58:06 2022 +0530
net/cnxk: update meter BPF ID in Receive Queue
Patch updates configured meter BPF(Bandwidth profile) ID is in
receive queue context during meter creation.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Sunil Kumar Kori <skori@mavell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
> ---
> v3: Fix commit message spelling
> drivers/net/cnxk/cn10k_rte_flow.c | 7 +++----
> drivers/net/cnxk/cnxk_ethdev_mtr.c | 21 ++++++++++++++++-----
> 2 files changed, 19 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/net/cnxk/cn10k_rte_flow.c b/drivers/net/cnxk/cn10k_rte_flow.c
> index b830abe63e..529fb0e4b7 100644
> --- a/drivers/net/cnxk/cn10k_rte_flow.c
> +++ b/drivers/net/cnxk/cn10k_rte_flow.c
> @@ -36,20 +36,20 @@ cn10k_mtr_configure(struct rte_eth_dev *eth_dev,
> for (i = 0; actions[i].type != RTE_FLOW_ACTION_TYPE_END; i++) {
> if (actions[i].type == RTE_FLOW_ACTION_TYPE_METER) {
> mtr_conf = (const struct rte_flow_action_meter
> - *)(actions->conf);
> + *)(actions[i].conf);
> mtr_id = mtr_conf->mtr_id;
> is_mtr_act = true;
> }
> if (actions[i].type == RTE_FLOW_ACTION_TYPE_QUEUE) {
> q_conf = (const struct rte_flow_action_queue
> - *)(actions->conf);
> + *)(actions[i].conf);
> if (is_mtr_act)
> nix_mtr_rq_update(eth_dev, mtr_id, 1,
> &q_conf->index);
> }
> if (actions[i].type == RTE_FLOW_ACTION_TYPE_RSS) {
> rss_conf = (const struct rte_flow_action_rss
> - *)(actions->conf);
> + *)(actions[i].conf);
> if (is_mtr_act)
> nix_mtr_rq_update(eth_dev, mtr_id,
> rss_conf->queue_num,
> @@ -171,7 +171,6 @@ cn10k_flow_create(struct rte_eth_dev *eth_dev, const struct rte_flow_attr *attr,
> return NULL;
> }
> }
> -
> for (i = 0; actions[i].type != RTE_FLOW_ACTION_TYPE_END; i++) {
> if (actions[i].type == RTE_FLOW_ACTION_TYPE_METER) {
> mtr = (const struct rte_flow_action_meter *)actions[i]
> diff --git a/drivers/net/cnxk/cnxk_ethdev_mtr.c b/drivers/net/cnxk/cnxk_ethdev_mtr.c
> index 39d8563826..cc783e5f86 100644
> --- a/drivers/net/cnxk/cnxk_ethdev_mtr.c
> +++ b/drivers/net/cnxk/cnxk_ethdev_mtr.c
> @@ -35,7 +35,6 @@ static struct rte_mtr_capabilities mtr_capa = {
> .chaining_n_mtrs_per_flow_max = NIX_MTR_COUNT_PER_FLOW,
> .chaining_use_prev_mtr_color_supported = true,
> .chaining_use_prev_mtr_color_enforced = true,
> - .meter_rate_max = NIX_BPF_RATE_MAX / 8, /* Bytes per second */
> .color_aware_srtcm_rfc2697_supported = true,
> .color_aware_trtcm_rfc2698_supported = true,
> .color_aware_trtcm_rfc4115_supported = true,
> @@ -180,13 +179,13 @@ cnxk_nix_mtr_capabilities_get(struct rte_eth_dev *dev,
> struct rte_mtr_capabilities *capa,
> struct rte_mtr_error *error)
> {
> - struct cnxk_eth_dev *eth_dev = cnxk_eth_pmd_priv(dev);
> - uint16_t count[ROC_NIX_BPF_LEVEL_MAX] = {0};
> uint8_t lvl_mask = ROC_NIX_BPF_LEVEL_F_LEAF | ROC_NIX_BPF_LEVEL_F_MID |
> ROC_NIX_BPF_LEVEL_F_TOP;
> + struct cnxk_eth_dev *eth_dev = cnxk_eth_pmd_priv(dev);
> + uint16_t count[ROC_NIX_BPF_LEVEL_MAX] = {0};
> struct roc_nix *nix = ð_dev->nix;
> - int rc;
> - int i;
> + uint32_t time_unit;
> + int rc, i;
>
> RTE_SET_USED(dev);
>
> @@ -207,6 +206,15 @@ cnxk_nix_mtr_capabilities_get(struct rte_eth_dev *dev,
> mtr_capa.meter_trtcm_rfc4115_n_max = mtr_capa.n_max;
> mtr_capa.meter_policy_n_max = mtr_capa.n_max;
>
> + rc = roc_nix_bpf_timeunit_get(nix, &time_unit);
> + if (rc)
> + return rc;
> +
> + mtr_capa.meter_rate_max =
> + NIX_BPF_RATE(time_unit, NIX_BPF_MAX_RATE_EXPONENT,
> + NIX_BPF_MAX_RATE_MANTISSA, 0) /
> + 8;
> +
> *capa = mtr_capa;
> return 0;
> }
> @@ -304,6 +312,9 @@ cnxk_nix_mtr_policy_validate(struct rte_eth_dev *dev,
> if (action->type == RTE_FLOW_ACTION_TYPE_DROP)
> supported[i] = true;
>
> + if (action->type == RTE_FLOW_ACTION_TYPE_VOID)
> + supported[i] = true;
> +
> if (!supported[i]) {
> sprintf(message,
> "%s action is not valid",
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 12+ messages in thread