From: Shijith Thotton <sthotton@marvell.com>
To: "Gujjar, Abhinandan S" <abhinandan.gujjar@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>,
Jerin Jacob Kollanukkaran <jerinj@marvell.com>
Cc: Anoob Joseph <anoobj@marvell.com>,
Pavan Nikhilesh Bhagavatula <pbhagavatula@marvell.com>,
Akhil Goyal <gakhil@marvell.com>
Subject: RE: [PATCH v3] app/eventdev: add crypto producer mode
Date: Mon, 24 Jan 2022 06:09:45 +0000 [thread overview]
Message-ID: <CO6PR18MB441823F62F4A3CE7780B2E2FD95E9@CO6PR18MB4418.namprd18.prod.outlook.com> (raw)
In-Reply-To: <PH0PR11MB482424899565125BF623A3C7E85D9@PH0PR11MB4824.namprd11.prod.outlook.com>
Hi Abhinandan,
>>
>> In crypto producer mode, producer core enqueues cryptodev with software
>> generated crypto ops and worker core dequeues crypto completion events
>> from the eventdev. Event crypto metadata used for above processing is pre-
>> populated in each crypto session.
>>
>> Parameter --prod_type_cryptodev can be used to enable crypto producer
>> mode. Parameter --crypto_adptr_mode can be set to select the crypto
>> adapter mode, 0 for OP_NEW and 1 for OP_FORWARD.
>>
>> This mode can be used to measure the performance of crypto adapter.
>>
>> Example:
>> ./dpdk-test-eventdev -l 0-2 -w <EVENTDEV> -w <CRYPTODEV> -- \
>> --prod_type_cryptodev --crypto_adptr_mode 1 --test=perf_atq \
>> --stlist=a --wlcores 1 --plcores 2
>>
>> Signed-off-by: Shijith Thotton <sthotton@marvell.com>
>> ---
>> v3:
>> * Reduce dereference inside loop.
>>
>> v2:
>> * Fix RHEL compilation warning.
>>
>> app/test-eventdev/evt_common.h | 3 +
>> app/test-eventdev/evt_main.c | 13 +-
>> app/test-eventdev/evt_options.c | 27 ++
>> app/test-eventdev/evt_options.h | 12 +
>> app/test-eventdev/evt_test.h | 6 +
>> app/test-eventdev/test_perf_atq.c | 51 ++++
>> app/test-eventdev/test_perf_common.c | 410
>> ++++++++++++++++++++++++++- app/test-
>> eventdev/test_perf_common.h | 16 ++ app/test-
>> eventdev/test_perf_queue.c | 52 ++++
>> doc/guides/tools/testeventdev.rst | 13 +
>> 10 files changed, 596 insertions(+), 7 deletions(-)
>>
>> diff --git a/app/test-eventdev/evt_common.h b/app/test-
>> eventdev/evt_common.h index f466434459..2f301a7e79 100644
>> --- a/app/test-eventdev/evt_common.h
>> +++ b/app/test-eventdev/evt_common.h
>> @@ -7,6 +7,7 @@
>>
>> #include <rte_common.h>
>> #include <rte_debug.h>
>> +#include <rte_event_crypto_adapter.h>
>> #include <rte_eventdev.h>
>> #include <rte_service.h>
>>
>> @@ -39,6 +40,7 @@ enum evt_prod_type {
>> EVT_PROD_TYPE_SYNT, /* Producer type Synthetic i.e. CPU. */
>> EVT_PROD_TYPE_ETH_RX_ADPTR, /* Producer type Eth Rx Adapter.
>> */
>> EVT_PROD_TYPE_EVENT_TIMER_ADPTR, /* Producer type Timer
>> Adapter. */
>> + EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR, /* Producer type Crypto
>> Adapter. */
>> EVT_PROD_TYPE_MAX,
>> };
>>
>> @@ -77,6 +79,7 @@ struct evt_options {
>> uint64_t timer_tick_nsec;
>> uint64_t optm_timer_tick_nsec;
>> enum evt_prod_type prod_type;
>> + enum rte_event_crypto_adapter_mode crypto_adptr_mode;
>> };
>>
>> static inline bool
>> diff --git a/app/test-eventdev/evt_main.c b/app/test-eventdev/evt_main.c
>> index 194c980c7a..cef0fb1382 100644
>> --- a/app/test-eventdev/evt_main.c
>> +++ b/app/test-eventdev/evt_main.c
>> @@ -161,12 +161,19 @@ main(int argc, char **argv)
>> goto mempool_destroy;
>> }
>> }
>New line required
>> + /* Test specific cryptodev setup */
>> + if (test->ops.cryptodev_setup) {
>> + if (test->ops.cryptodev_setup(test, &opt)) {
>> + evt_err("%s: cryptodev setup failed",
>> opt.test_name);
>> + goto ethdev_destroy;
>> + }
>> + }
>>
>> /* Test specific eventdev setup */
>> if (test->ops.eventdev_setup) {
>> if (test->ops.eventdev_setup(test, &opt)) {
>> evt_err("%s: eventdev setup failed",
>> opt.test_name);
>> - goto ethdev_destroy;
>> + goto cryptodev_destroy;
>> }
>> }
>>
>> @@ -197,6 +204,10 @@ main(int argc, char **argv)
>> if (test->ops.eventdev_destroy)
>> test->ops.eventdev_destroy(test, &opt);
>>
>> +cryptodev_destroy:
>> + if (test->ops.cryptodev_destroy)
>> + test->ops.cryptodev_destroy(test, &opt);
>> +
>> ethdev_destroy:
>> if (test->ops.ethdev_destroy)
>> test->ops.ethdev_destroy(test, &opt); diff --git a/app/test-
>> eventdev/evt_options.c b/app/test-eventdev/evt_options.c index
>> 753a7dbd7d..5ad1491020 100644
>> --- a/app/test-eventdev/evt_options.c
>> +++ b/app/test-eventdev/evt_options.c
>> @@ -122,6 +122,26 @@ evt_parse_timer_prod_type_burst(struct
>> evt_options *opt,
>> return 0;
>> }
>>
>> +static int
>> +evt_parse_crypto_prod_type(struct evt_options *opt,
>> + const char *arg __rte_unused)
>> +{
>> + opt->prod_type = EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR;
>> + return 0;
>> +}
>> +
>> +static int
>> +evt_parse_crypto_adptr_mode(struct evt_options *opt, const char *arg) {
>> + uint8_t mode;
>> + int ret;
>> +
>> + ret = parser_read_uint8(&mode, arg);
>> + opt->crypto_adptr_mode = mode ?
>> RTE_EVENT_CRYPTO_ADAPTER_OP_FORWARD :
>> +
>> RTE_EVENT_CRYPTO_ADAPTER_OP_NEW;
>> + return ret;
>> +}
>> +
>> static int
>> evt_parse_test_name(struct evt_options *opt, const char *arg) { @@ -
>> 335,6 +355,7 @@ usage(char *program)
>> "\t--queue_priority : enable queue priority\n"
>> "\t--deq_tmo_nsec : global dequeue timeout\n"
>> "\t--prod_type_ethdev : use ethernet device as
>> producer.\n"
>> + "\t--prod_type_cryptodev : use crypto device as
>> producer.\n"
>> "\t--prod_type_timerdev : use event timer device as
>> producer.\n"
>> "\t expity_nsec would be the timeout\n"
>> "\t in ns.\n"
>> @@ -345,6 +366,8 @@ usage(char *program)
>> "\t--timer_tick_nsec : timer tick interval in ns.\n"
>> "\t--max_tmo_nsec : max timeout interval in ns.\n"
>> "\t--expiry_nsec : event timer expiry ns.\n"
>> + "\t--crypto_adptr_mode : 0 for OP_NEW mode (default)
>> and\n"
>> + "\t 1 for OP_FORWARD mode.\n"
>> "\t--mbuf_sz : packet mbuf size.\n"
>> "\t--max_pkt_sz : max packet size.\n"
>> "\t--prod_enq_burst_sz : producer enqueue burst size.\n"
>> @@ -415,8 +438,10 @@ static struct option lgopts[] = {
>> { EVT_QUEUE_PRIORITY, 0, 0, 0 },
>> { EVT_DEQ_TMO_NSEC, 1, 0, 0 },
>> { EVT_PROD_ETHDEV, 0, 0, 0 },
>> + { EVT_PROD_CRYPTODEV, 0, 0, 0 },
>> { EVT_PROD_TIMERDEV, 0, 0, 0 },
>> { EVT_PROD_TIMERDEV_BURST, 0, 0, 0 },
>> + { EVT_CRYPTO_ADPTR_MODE, 1, 0, 0 },
>> { EVT_NB_TIMERS, 1, 0, 0 },
>> { EVT_NB_TIMER_ADPTRS, 1, 0, 0 },
>> { EVT_TIMER_TICK_NSEC, 1, 0, 0 },
>> @@ -455,8 +480,10 @@ evt_opts_parse_long(int opt_idx, struct evt_options
>> *opt)
>> { EVT_QUEUE_PRIORITY, evt_parse_queue_priority},
>> { EVT_DEQ_TMO_NSEC, evt_parse_deq_tmo_nsec},
>> { EVT_PROD_ETHDEV, evt_parse_eth_prod_type},
>> + { EVT_PROD_CRYPTODEV, evt_parse_crypto_prod_type},
>> { EVT_PROD_TIMERDEV, evt_parse_timer_prod_type},
>> { EVT_PROD_TIMERDEV_BURST,
>> evt_parse_timer_prod_type_burst},
>> + { EVT_CRYPTO_ADPTR_MODE,
>> evt_parse_crypto_adptr_mode},
>> { EVT_NB_TIMERS, evt_parse_nb_timers},
>> { EVT_NB_TIMER_ADPTRS, evt_parse_nb_timer_adptrs},
>> { EVT_TIMER_TICK_NSEC, evt_parse_timer_tick_nsec}, diff --
>> git a/app/test-eventdev/evt_options.h b/app/test-eventdev/evt_options.h
>> index 413d7092f0..2231c58801 100644
>> --- a/app/test-eventdev/evt_options.h
>> +++ b/app/test-eventdev/evt_options.h
>> @@ -9,6 +9,7 @@
>> #include <stdbool.h>
>>
>> #include <rte_common.h>
>> +#include <rte_cryptodev.h>
>> #include <rte_ethdev.h>
>> #include <rte_eventdev.h>
>> #include <rte_lcore.h>
>> @@ -33,8 +34,10 @@
>> #define EVT_QUEUE_PRIORITY ("queue_priority")
>> #define EVT_DEQ_TMO_NSEC ("deq_tmo_nsec")
>> #define EVT_PROD_ETHDEV ("prod_type_ethdev")
>> +#define EVT_PROD_CRYPTODEV ("prod_type_cryptodev")
>> #define EVT_PROD_TIMERDEV ("prod_type_timerdev")
>> #define EVT_PROD_TIMERDEV_BURST ("prod_type_timerdev_burst")
>> +#define EVT_CRYPTO_ADPTR_MODE ("crypto_adptr_mode")
>> #define EVT_NB_TIMERS ("nb_timers")
>> #define EVT_NB_TIMER_ADPTRS ("nb_timer_adptrs")
>> #define EVT_TIMER_TICK_NSEC ("timer_tick_nsec")
>> @@ -249,6 +252,8 @@ evt_prod_id_to_name(enum evt_prod_type
>> prod_type)
>> return "Ethdev Rx Adapter";
>> case EVT_PROD_TYPE_EVENT_TIMER_ADPTR:
>> return "Event timer adapter";
>> + case EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR:
>> + return "Event crypto adapter";
>> }
>>
>> return "";
>> @@ -288,6 +293,13 @@ evt_dump_producer_type(struct evt_options *opt)
>> evt_dump("timer_tick_nsec", "%"PRIu64"",
>> opt->timer_tick_nsec);
>> break;
>> + case EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR:
>> + snprintf(name, EVT_PROD_MAX_NAME_LEN,
>> + "Event crypto adapter producers");
>> + evt_dump("crypto adapter mode", "%s",
>> + opt->crypto_adptr_mode ? "OP_FORWARD" :
>> "OP_NEW");
>> + evt_dump("nb_cryptodev", "%u", rte_cryptodev_count());
>> + break;
>> }
>> evt_dump("prod_type", "%s", name);
>> }
>> diff --git a/app/test-eventdev/evt_test.h b/app/test-eventdev/evt_test.h
>> index f07d2c3336..50fa474ec2 100644
>> --- a/app/test-eventdev/evt_test.h
>> +++ b/app/test-eventdev/evt_test.h
>> @@ -29,6 +29,8 @@ typedef int (*evt_test_mempool_setup_t)
>> (struct evt_test *test, struct evt_options *opt); typedef int
>> (*evt_test_ethdev_setup_t)
>> (struct evt_test *test, struct evt_options *opt);
>> +typedef int (*evt_test_cryptodev_setup_t)
>> + (struct evt_test *test, struct evt_options *opt);
>> typedef int (*evt_test_eventdev_setup_t)
>> (struct evt_test *test, struct evt_options *opt); typedef int
>> (*evt_test_launch_lcores_t) @@ -39,6 +41,8 @@ typedef void
>> (*evt_test_eventdev_destroy_t)
>> (struct evt_test *test, struct evt_options *opt); typedef void
>> (*evt_test_ethdev_destroy_t)
>> (struct evt_test *test, struct evt_options *opt);
>> +typedef void (*evt_test_cryptodev_destroy_t)
>> + (struct evt_test *test, struct evt_options *opt);
>> typedef void (*evt_test_mempool_destroy_t)
>> (struct evt_test *test, struct evt_options *opt); typedef void
>> (*evt_test_destroy_t) @@ -52,10 +56,12 @@ struct evt_test_ops {
>> evt_test_mempool_setup_t mempool_setup;
>> evt_test_ethdev_setup_t ethdev_setup;
>> evt_test_eventdev_setup_t eventdev_setup;
>> + evt_test_cryptodev_setup_t cryptodev_setup;
>> evt_test_launch_lcores_t launch_lcores;
>> evt_test_result_t test_result;
>> evt_test_eventdev_destroy_t eventdev_destroy;
>> evt_test_ethdev_destroy_t ethdev_destroy;
>> + evt_test_cryptodev_destroy_t cryptodev_destroy;
>> evt_test_mempool_destroy_t mempool_destroy;
>> evt_test_destroy_t test_destroy;
>> };
>> diff --git a/app/test-eventdev/test_perf_atq.c b/app/test-
>> eventdev/test_perf_atq.c
>> index 8fd51004ee..dbb1dc8c0c 100644
>> --- a/app/test-eventdev/test_perf_atq.c
>> +++ b/app/test-eventdev/test_perf_atq.c
>> @@ -48,6 +48,22 @@ perf_atq_worker(void *arg, const int
>> enable_fwd_latency)
>> continue;
>> }
>>
>> + if (prod_crypto_type &&
>> + (ev.event_type == RTE_EVENT_TYPE_CRYPTODEV)) {
>> + struct rte_crypto_op *op = ev.event_ptr;
>> +
>> + if (op->status ==
>> RTE_CRYPTO_OP_STATUS_SUCCESS) {
>> + if (op->sym->m_dst == NULL)
>> + ev.event_ptr = op->sym->m_src;
>> + else
>> + ev.event_ptr = op->sym->m_dst;
>> + rte_crypto_op_free(op);
>> + } else {
>> + rte_crypto_op_free(op);
>> + continue;
>> + }
>> + }
>> +
>> if (enable_fwd_latency && !prod_timer_type)
>> /* first stage in pipeline, mark ts to compute fwd latency */
>> atq_mark_fwd_latency(&ev);
>> @@ -87,6 +103,25 @@ perf_atq_worker_burst(void *arg, const int
>> enable_fwd_latency)
>> }
>>
>> for (i = 0; i < nb_rx; i++) {
>> + if (prod_crypto_type &&
>> + (ev[i].event_type ==
>> RTE_EVENT_TYPE_CRYPTODEV)) {
>> + struct rte_crypto_op *op = ev[i].event_ptr;
>> +
>> + if (op->status ==
>> + RTE_CRYPTO_OP_STATUS_SUCCESS) {
>> + if (op->sym->m_dst == NULL)
>> + ev[i].event_ptr =
>> + op->sym->m_src;
>> + else
>> + ev[i].event_ptr =
>> + op->sym->m_dst;
>> + rte_crypto_op_free(op);
>> + } else {
>> + rte_crypto_op_free(op);
>> + continue;
>> + }
>> + }
>> +
>> if (enable_fwd_latency && !prod_timer_type) {
>> rte_prefetch0(ev[i+1].event_ptr);
>> /* first stage in pipeline.
>> @@ -254,6 +289,20 @@ perf_atq_eventdev_setup(struct evt_test *test,
>> struct evt_options *opt)
>> return ret;
>> }
>> }
>> + } else if (opt->prod_type ==
>> EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
>> + uint8_t cdev_id, cdev_count;
>> +
>> + cdev_count = rte_cryptodev_count();
>> + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
>> + ret = rte_cryptodev_start(cdev_id);
>> + if (ret) {
>> + evt_err("Failed to start cryptodev %u",
>> + cdev_id);
>> + return ret;
>> + }
>> + }
>> +
>> + rte_event_crypto_adapter_start(t->crypto_adptr.id);
>> }
>>
>> return 0;
>> @@ -295,12 +344,14 @@ static const struct evt_test_ops perf_atq = {
>> .opt_dump = perf_atq_opt_dump,
>> .test_setup = perf_test_setup,
>> .ethdev_setup = perf_ethdev_setup,
>> + .cryptodev_setup = perf_cryptodev_setup,
>> .mempool_setup = perf_mempool_setup,
>> .eventdev_setup = perf_atq_eventdev_setup,
>> .launch_lcores = perf_atq_launch_lcores,
>> .eventdev_destroy = perf_eventdev_destroy,
>> .mempool_destroy = perf_mempool_destroy,
>> .ethdev_destroy = perf_ethdev_destroy,
>> + .cryptodev_destroy = perf_cryptodev_destroy,
>> .test_result = perf_test_result,
>> .test_destroy = perf_test_destroy,
>> };
>> diff --git a/app/test-eventdev/test_perf_common.c b/app/test-
>> eventdev/test_perf_common.c
>> index 9b73874151..91cb6748ee 100644
>> --- a/app/test-eventdev/test_perf_common.c
>> +++ b/app/test-eventdev/test_perf_common.c
>> @@ -6,6 +6,8 @@
>>
>> #include "test_perf_common.h"
>>
>> +#define NB_CRYPTODEV_DESCRIPTORS 128
>> +
>> int
>> perf_test_result(struct evt_test *test, struct evt_options *opt) { @@ -272,6
>> +274,125 @@ perf_event_timer_producer_burst(void *arg)
>> return 0;
>> }
>>
>> +static inline void
>> +crypto_adapter_enq_op_new(struct prod_data *p) {
>> + struct rte_cryptodev_sym_session **crypto_sess = p->crypto_sess;
>> + struct test_perf *t = p->t;
>> + const uint32_t nb_flows = t->nb_flows;
>> + const uint64_t nb_pkts = t->nb_pkts;
>> + struct rte_mempool *pool = t->pool;
>> + struct rte_crypto_sym_op *sym_op;
>> + struct evt_options *opt = t->opt;
>> + uint16_t qp_id = p->cdev_qp_id;
>> + uint8_t cdev_id = p->cdev_id;
>> + uint32_t flow_counter = 0;
>> + struct rte_crypto_op *op;
>> + struct rte_mbuf *m;
>> + uint64_t count = 0;
>> + uint16_t len;
>> +
>> + if (opt->verbose_level > 1)
>> + printf("%s(): lcore %d queue %d cdev_id %u cdev_qp_id
>> %u\n",
>> + __func__, rte_lcore_id(), p->queue_id, p->cdev_id,
>> + p->cdev_qp_id);
>> +
>> + len = opt->mbuf_sz ? opt->mbuf_sz : RTE_ETHER_MIN_LEN;
>> +
>> + while (count < nb_pkts && t->done == false) {
>> + m = rte_pktmbuf_alloc(pool);
>> + if (m == NULL)
>> + continue;
>> +
>> + rte_pktmbuf_append(m, len);
>> + op = rte_crypto_op_alloc(t->crypto_adptr.op_pool,
>> +
>> RTE_CRYPTO_OP_TYPE_SYMMETRIC);
>> + sym_op = op->sym;
>> + sym_op->m_src = m;
>> + sym_op->cipher.data.offset = 0;
>> + sym_op->cipher.data.length = len;
>> + rte_crypto_op_attach_sym_session(
>> + op, crypto_sess[flow_counter++ % nb_flows]);
>> + while (rte_cryptodev_enqueue_burst(cdev_id, qp_id, &op,
>> 1) !=
>> + 1) {
>> + if (t->done)
>> + break;
>> + rte_pause();
>> + }
>> + count++;
>> + }
>> +}
>> +
>> +static inline void
>> +crypto_adapter_enq_op_fwd(struct prod_data *p) {
>> + struct rte_cryptodev_sym_session **crypto_sess = p->crypto_sess;
>> + const uint8_t dev_id = p->dev_id;
>> + const uint8_t port = p->port_id;
>> + struct test_perf *t = p->t;
>> + const uint32_t nb_flows = t->nb_flows;
>> + const uint64_t nb_pkts = t->nb_pkts;
>> + struct rte_mempool *pool = t->pool;
>> + struct evt_options *opt = t->opt;
>> + struct rte_crypto_sym_op *sym_op;
>> + uint32_t flow_counter = 0;
>> + struct rte_crypto_op *op;
>> + struct rte_event ev;
>> + struct rte_mbuf *m;
>> + uint64_t count = 0;
>> + uint16_t len;
>> +
>> + if (opt->verbose_level > 1)
>> + printf("%s(): lcore %d port %d queue %d cdev_id %u
>> cdev_qp_id %u\n",
>> + __func__, rte_lcore_id(), port, p->queue_id, p->cdev_id,
>> + p->cdev_qp_id);
>> +
>> + ev.event = 0;
>> + ev.op = RTE_EVENT_OP_NEW;
>> + ev.queue_id = p->queue_id;
>> + ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
>> + ev.event_type = RTE_EVENT_TYPE_CPU;
>> + len = opt->mbuf_sz ? opt->mbuf_sz : RTE_ETHER_MIN_LEN;
>> +
>> + while (count < nb_pkts && t->done == false) {
>> + m = rte_pktmbuf_alloc(pool);
>> + if (m == NULL)
>> + continue;
>> +
>> + rte_pktmbuf_append(m, len);
>> + op = rte_crypto_op_alloc(t->crypto_adptr.op_pool,
>> +
>> RTE_CRYPTO_OP_TYPE_SYMMETRIC);
>> + sym_op = op->sym;
>> + sym_op->m_src = m;
>> + sym_op->cipher.data.offset = 0;
>> + sym_op->cipher.data.length = len;
>> + rte_crypto_op_attach_sym_session(
>> + op, crypto_sess[flow_counter++ % nb_flows]);
>> + ev.event_ptr = op;
>> + while (rte_event_crypto_adapter_enqueue(dev_id, port,
>> &ev, 1) !=
>> + 1) {
>> + if (t->done)
>> + break;
>> + rte_pause();
>> + }
>> + count++;
>> + }
>> +}
>> +
>> +static inline int
>> +perf_event_crypto_producer(void *arg)
>> +{
>> + struct prod_data *p = arg;
>> + struct evt_options *opt = p->t->opt;
>> +
>> + if (opt->crypto_adptr_mode ==
>> RTE_EVENT_CRYPTO_ADAPTER_OP_NEW)
>> + crypto_adapter_enq_op_new(p);
>> + else
>> + crypto_adapter_enq_op_fwd(p);
>> +
>> + return 0;
>> +}
>> +
>> static int
>> perf_producer_wrapper(void *arg)
>> {
>> @@ -298,6 +419,8 @@ perf_producer_wrapper(void *arg)
>> else if (t->opt->prod_type ==
>> EVT_PROD_TYPE_EVENT_TIMER_ADPTR &&
>> t->opt->timdev_use_burst)
>> return perf_event_timer_producer_burst(arg);
>> + else if (t->opt->prod_type ==
>> EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR)
>> + return perf_event_crypto_producer(arg);
>> return 0;
>> }
>>
>> @@ -405,8 +528,10 @@ perf_launch_lcores(struct evt_test *test, struct
>> evt_options *opt,
>> if (remaining <= 0) {
>> t->result = EVT_TEST_SUCCESS;
>> if (opt->prod_type ==
>> EVT_PROD_TYPE_SYNT ||
>> - opt->prod_type ==
>> -
>> EVT_PROD_TYPE_EVENT_TIMER_ADPTR) {
>> + opt->prod_type ==
>> +
>> EVT_PROD_TYPE_EVENT_TIMER_ADPTR ||
>> + opt->prod_type ==
>> +
>> EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
>> t->done = true;
>> break;
>> }
>> @@ -415,7 +540,8 @@ perf_launch_lcores(struct evt_test *test, struct
>> evt_options *opt,
>>
>> if (new_cycles - dead_lock_cycles > dead_lock_sample &&
>> (opt->prod_type == EVT_PROD_TYPE_SYNT ||
>> - opt->prod_type ==
>> EVT_PROD_TYPE_EVENT_TIMER_ADPTR)) {
>> + opt->prod_type ==
>> EVT_PROD_TYPE_EVENT_TIMER_ADPTR ||
>> + opt->prod_type ==
>> EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR)) {
>> remaining = t->outstand_pkts - processed_pkts(t);
>> if (dead_lock_remaining == remaining) {
>> rte_event_dev_dump(opt->dev_id, stdout);
>> @@ -537,6 +663,96 @@ perf_event_timer_adapter_setup(struct test_perf
>> *t)
>> return 0;
>> }
>>
>> +static int
>> +perf_event_crypto_adapter_setup(struct test_perf *t,
>> + struct rte_event_port_conf port_conf) {
>> + struct evt_options *opt = t->opt;
>> + uint8_t cdev_id, cdev_count;
>> + int ret;
>> +
>> + t->crypto_adptr.id = 0;
>> + ret = rte_event_crypto_adapter_create(t->crypto_adptr.id, opt-
>> >dev_id,
>> + &port_conf, 0);
>> + if (ret)
>> + return ret;
>> +
>> + cdev_count = rte_cryptodev_count();
>> + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
>> + uint32_t cap;
>> +
>> + ret = rte_event_crypto_adapter_caps_get(opt->dev_id,
>> cdev_id,
>> + &cap);
>> + if (ret) {
>> + evt_err("Failed to get crypto adapter capabilities");
>> + return ret;
>> + }
>> +
>> + if (((opt->crypto_adptr_mode ==
>> + RTE_EVENT_CRYPTO_ADAPTER_OP_NEW) &&
>> + !(cap &
>> +
>> RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW)) ||
>> + ((opt->crypto_adptr_mode ==
>> + RTE_EVENT_CRYPTO_ADAPTER_OP_FORWARD) &&
>> + !(cap &
>> +
>> RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD))) {
>> + evt_err("crypto adapter %s mode unsupported\n",
>> + opt->crypto_adptr_mode ? "OP_FORWARD"
>> :
>> + "OP_NEW");
>> + return -EINVAL;
>> + }
>> +
>> + if (!(cap &
>> +
>> RTE_EVENT_CRYPTO_ADAPTER_CAP_SESSION_PRIVATE_DATA)) {
>> + evt_err("Storing crypto session not supported");
>> + return -EINVAL;
>> + }
>> +
>> + if (cap &
>> +
>> RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND) {
>> + struct rte_event response_info;
>> +
>> + response_info.event = 0;
>> + ret = rte_event_crypto_adapter_queue_pair_add(
>> + t->crypto_adptr.id, cdev_id, -1,
>> + &response_info);
>> + } else {
>> + ret = rte_event_crypto_adapter_queue_pair_add(
>> + t->crypto_adptr.id, cdev_id, -1, NULL);
>> + }
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static struct rte_cryptodev_sym_session *
>> +cryptodev_sym_sess_create(struct prod_data *p, struct test_perf *t) {
>> + struct rte_crypto_sym_xform cipher_xform;
>> + struct rte_cryptodev_sym_session *sess;
>> +
>> + cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
>> + cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_NULL;
>> + cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
>> + cipher_xform.next = NULL;
>> +
>> + sess = rte_cryptodev_sym_session_create(t-
>> >crypto_adptr.sess_pool);
>> + if (sess == NULL) {
>> + evt_err("Failed to create sym session");
>> + return NULL;
>> + }
>> +
>> + if (rte_cryptodev_sym_session_init(p->cdev_id, sess,
>> &cipher_xform,
>> + t->crypto_adptr.sess_priv_pool)) {
>> + evt_err("Failed to init session");
>> + return NULL;
>> + }
>> +
>> + return sess;
>> +}
>> +
>> int
>> perf_event_dev_port_setup(struct evt_test *test, struct evt_options *opt,
>> uint8_t stride, uint8_t nb_queues,
>> @@ -598,6 +814,55 @@ perf_event_dev_port_setup(struct evt_test *test,
>> struct evt_options *opt,
>> ret = perf_event_timer_adapter_setup(t);
>> if (ret)
>> return ret;
>> + } else if (opt->prod_type ==
>> EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
>> + uint8_t cdev_id = 0;
>> + uint16_t qp_id = 0;
>> +
>> + prod = 0;
>> + for (; port < perf_nb_event_ports(opt); port++) {
>> + struct rte_cryptodev_sym_session *crypto_sess;
>> + union rte_event_crypto_metadata m_data;
>> + struct prod_data *p = &t->prod[port];
>> + uint32_t flow_id;
>> +
>> + if (qp_id ==
>> rte_cryptodev_queue_pair_count(cdev_id)) {
>> + cdev_id++;
>> + qp_id = 0;
>> + }
>> +
>> + p->dev_id = opt->dev_id;
>> + p->port_id = port;
>> + p->queue_id = prod * stride;
>> + p->cdev_id = cdev_id;
>> + p->cdev_qp_id = qp_id;
>> + p->crypto_sess = rte_zmalloc_socket(
>> + NULL, sizeof(crypto_sess) * t->nb_flows,
>> + RTE_CACHE_LINE_SIZE, opt->socket_id);
>> +
>> + m_data.request_info.cdev_id = p->cdev_id;
>> + m_data.request_info.queue_pair_id = p-
>> >cdev_qp_id;
>> + m_data.response_info.op = RTE_EVENT_OP_NEW;
>> + m_data.response_info.sched_type =
>> RTE_SCHED_TYPE_ATOMIC;
>> + m_data.response_info.event_type =
>> RTE_EVENT_TYPE_CPU;
>> + m_data.response_info.queue_id = p->queue_id;
>> + for (flow_id = 0; flow_id < t->nb_flows; flow_id++) {
>> + crypto_sess =
>> cryptodev_sym_sess_create(p, t);
>> + if (crypto_sess == NULL)
>> + return -ENOMEM;
>> +
>> + m_data.response_info.flow_id = flow_id;
>> + rte_cryptodev_sym_session_set_user_data(
>> + crypto_sess, &m_data,
>> sizeof(m_data));
>> + p->crypto_sess[flow_id] = crypto_sess;
>> + }
>> + p->t = t;
>> + qp_id++;
>> + prod++;
>> + }
>> +
>> + ret = perf_event_crypto_adapter_setup(t, *port_conf);
>> + if (ret)
>> + return ret;
>> } else {
>> prod = 0;
>> for ( ; port < perf_nb_event_ports(opt); port++) { @@ -659,7
>> +924,8 @@ perf_opt_check(struct evt_options *opt, uint64_t nb_queues)
>> }
>>
>> if (opt->prod_type == EVT_PROD_TYPE_SYNT ||
>> - opt->prod_type ==
>> EVT_PROD_TYPE_EVENT_TIMER_ADPTR) {
>> + opt->prod_type == EVT_PROD_TYPE_EVENT_TIMER_ADPTR ||
>> + opt->prod_type == EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
>> /* Validate producer lcores */
>> if (evt_lcores_has_overlap(opt->plcores,
>> rte_get_main_lcore())) {
>> @@ -767,8 +1033,7 @@ perf_ethdev_setup(struct evt_test *test, struct
>> evt_options *opt)
>> },
>> };
>>
>> - if (opt->prod_type == EVT_PROD_TYPE_SYNT ||
>> - opt->prod_type ==
>> EVT_PROD_TYPE_EVENT_TIMER_ADPTR)
>> + if (opt->prod_type != EVT_PROD_TYPE_ETH_RX_ADPTR)
>> return 0;
>>
>> if (!rte_eth_dev_count_avail()) {
>> @@ -841,6 +1106,139 @@ void perf_ethdev_destroy(struct evt_test *test,
>> struct evt_options *opt)
>> }
>> }
>>
>> +int
>> +perf_cryptodev_setup(struct evt_test *test, struct evt_options *opt) {
>> + uint8_t cdev_count, cdev_id, nb_plcores, nb_qps;
>> + struct test_perf *t = evt_test_priv(test);
>> + unsigned int max_session_size;
>> + uint32_t nb_sessions;
>> + int ret;
>> +
>> + if (opt->prod_type != EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR)
>> + return 0;
>How do you differentiate between this failed case as you are returning 0 in case of
>success?
>
>> +
>> + cdev_count = rte_cryptodev_count();
>> + if (cdev_count == 0) {
>> + evt_err("No crypto devices available\n");
>> + return -ENODEV;
>> + }
>> +
>> + t->crypto_adptr.op_pool = rte_crypto_op_pool_create(
>> + "crypto_op_pool", RTE_CRYPTO_OP_TYPE_SYMMETRIC, opt-
>> >pool_sz,
>> + 128, 0, rte_socket_id());
>> + if (t->crypto_adptr.op_pool == NULL) {
>> + evt_err("Failed to create crypto op pool");
>> + return -ENOMEM;
>> + }
>> +
>> + nb_sessions = evt_nr_active_lcores(opt->plcores) * t->nb_flows;
>> + t->crypto_adptr.sess_pool =
>> rte_cryptodev_sym_session_pool_create(
>> + "ca_sess_pool", nb_sessions, 0, 0,
>> + sizeof(union rte_event_crypto_metadata),
>> SOCKET_ID_ANY);
>> + if (t->crypto_adptr.sess_pool == NULL) {
>> + evt_err("Failed to create sym session pool");
>> + ret = -ENOMEM;
>> + goto err;
>> + }
>> +
>> + max_session_size = 0;
>> + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
>> + unsigned int session_size;
>> +
>> + session_size =
>> +
>> rte_cryptodev_sym_get_private_session_size(cdev_id);
>> + if (session_size > max_session_size)
>> + max_session_size = session_size;
>> + }
>New line required
>> + max_session_size += sizeof(union rte_event_crypto_metadata);
>> + t->crypto_adptr.sess_priv_pool = rte_mempool_create(
>> + "ca_sess_priv_pool", nb_sessions, max_session_size, 0, 0,
>> NULL,
>> + NULL, NULL, NULL, SOCKET_ID_ANY, 0);
>> + if (t->crypto_adptr.sess_priv_pool == NULL) {
>> + evt_err("failed to create sym session private pool");
>> + ret = -ENOMEM;
>> + goto err;
>> + }
>> +
>> + nb_plcores = evt_nr_active_lcores(opt->plcores);
>> + nb_qps = (nb_plcores % cdev_count) ? (nb_plcores / cdev_count) +
>> 1 :
>> + nb_plcores / cdev_count;
>Let's take an example:
>Cdev1 -> 8 qps
>Cdev2 -> 2 qps
>Cdev_count = 2
>nb_plcores = 7
>As per above statement, nb_qps = ( 7 % 2 ) 7/2 + 1 = 4 qps
>So, this fails to setup qps for cdev2 as it supports only 2 qps and test exits! Am I
>missing anything?
>
What you told is correct. But this is a simple logic to distribute qps across
multiple cdev and doesn't consider the case you mentioned. You could see
similar logic used in other apps. I will add a comment as below:
/*
* Calculate number of needed queue pairs, based on the amount
* of available number of logical cores and crypto devices.
* For instance, if there are 4 cores and 2 crypto devices,
* 2 queue pairs will be set up per device.
*/
>> + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
>> + struct rte_cryptodev_qp_conf qp_conf;
>> + struct rte_cryptodev_config conf;
>> + struct rte_cryptodev_info info;
>> + int qp_id;
>> +
>> + rte_cryptodev_info_get(cdev_id, &info);
>> + if (nb_qps > info.max_nb_queue_pairs) {
>> + evt_err("Not enough queue pairs per cryptodev
>> (%u)",
>> + nb_qps);
>> + ret = -EINVAL;
>> + goto err;
>> + }
>> +
>> + conf.nb_queue_pairs = nb_qps;
>> + conf.socket_id = SOCKET_ID_ANY;
>> + conf.ff_disable = RTE_CRYPTODEV_FF_SECURITY;
>> +
>> + ret = rte_cryptodev_configure(cdev_id, &conf);
>> + if (ret) {
>> + evt_err("Failed to configure cryptodev (%u)",
>> cdev_id);
>> + goto err;
>> + }
>> +
>> + qp_conf.nb_descriptors = NB_CRYPTODEV_DESCRIPTORS;
>> + qp_conf.mp_session = t->crypto_adptr.sess_pool;
>> + qp_conf.mp_session_private = t-
>> >crypto_adptr.sess_priv_pool;
>> +
>> + for (qp_id = 0; qp_id < conf.nb_queue_pairs; qp_id++) {
>> + ret = rte_cryptodev_queue_pair_setup(
>> + cdev_id, qp_id, &qp_conf,
>> + rte_cryptodev_socket_id(cdev_id));
>> + if (ret) {
>> + evt_err("Failed to setup queue pairs on
>> cryptodev %u\n",
>> + cdev_id);
>> + goto err;
>> + }
>> + }
>> + }
>> +
>> + return 0;
>> +err:
>> + rte_mempool_free(t->crypto_adptr.op_pool);
>> + rte_mempool_free(t->crypto_adptr.sess_pool);
>> + rte_mempool_free(t->crypto_adptr.sess_priv_pool);
>> +
>> + return ret;
>> +}
>> +
>> +void
>> +perf_cryptodev_destroy(struct evt_test *test, struct evt_options *opt)
>> +{
>> + uint8_t cdev_id, cdev_count = rte_cryptodev_count();
>> + struct test_perf *t = evt_test_priv(test);
>> +
>> + RTE_SET_USED(opt);
>> +
>> + if (opt->prod_type != EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR)
>> + return;
>> +
>> + rte_event_crypto_adapter_stop(t->crypto_adptr.id);
>> +
>> + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
>> + rte_cryptodev_stop(cdev_id);
>> + rte_event_crypto_adapter_queue_pair_del(t-
>> >crypto_adptr.id,
>> + cdev_id, -1);
>Any reason for passing -1? This can not ensure to cleanup all the preconfigured
>qps as per API.
>> + }
>> +
>> + rte_event_crypto_adapter_free(t->crypto_adptr.id);
>> +
>> + rte_mempool_free(t->crypto_adptr.op_pool);
>> + rte_mempool_free(t->crypto_adptr.sess_pool);
>> + rte_mempool_free(t->crypto_adptr.sess_priv_pool);
>> +}
>> +
>> int
>> perf_mempool_setup(struct evt_test *test, struct evt_options *opt) { diff -
>> -git a/app/test-eventdev/test_perf_common.h b/app/test-
>> eventdev/test_perf_common.h
>> index 14dcf80429..d9ad3a0b0d 100644
>> --- a/app/test-eventdev/test_perf_common.h
>> +++ b/app/test-eventdev/test_perf_common.h
>> @@ -9,9 +9,11 @@
>> #include <stdbool.h>
>> #include <unistd.h>
>>
>> +#include <rte_cryptodev.h>
>> #include <rte_cycles.h>
>> #include <rte_ethdev.h>
>> #include <rte_eventdev.h>
>> +#include <rte_event_crypto_adapter.h>
>> #include <rte_event_eth_rx_adapter.h>
>> #include <rte_event_timer_adapter.h>
>> #include <rte_lcore.h>
>> @@ -37,9 +39,18 @@ struct prod_data {
>> uint8_t dev_id;
>> uint8_t port_id;
>> uint8_t queue_id;
>> + uint8_t cdev_id;
>> + uint16_t cdev_qp_id;
>> + struct rte_cryptodev_sym_session **crypto_sess;
>> struct test_perf *t;
>> } __rte_cache_aligned;
>>
>> +struct crypto_adptr_data {
>> + uint8_t id;
>> + struct rte_mempool *op_pool;
>> + struct rte_mempool *sess_pool;
>> + struct rte_mempool *sess_priv_pool;
>> +};
>>
>> struct test_perf {
>> /* Don't change the offset of "done". Signal handler use this memory
>> @@ -58,6 +69,7 @@ struct test_perf {
>> uint8_t sched_type_list[EVT_MAX_STAGES] __rte_cache_aligned;
>> struct rte_event_timer_adapter *timer_adptr[
>> RTE_EVENT_TIMER_ADAPTER_NUM_MAX]
>> __rte_cache_aligned;
>> + struct crypto_adptr_data crypto_adptr;
>> } __rte_cache_aligned;
>>
>> struct perf_elt {
>> @@ -81,6 +93,8 @@ struct perf_elt {
>> const uint8_t port = w->port_id;\
>> const uint8_t prod_timer_type = \
>> opt->prod_type ==
>> EVT_PROD_TYPE_EVENT_TIMER_ADPTR;\
>> + const uint8_t prod_crypto_type = \
>> + opt->prod_type ==
>> EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR;\
>> uint8_t *const sched_type_list = &t->sched_type_list[0];\
>> struct rte_mempool *const pool = t->pool;\
>> const uint8_t nb_stages = t->opt->nb_stages;\ @@ -154,6 +168,7
>> @@ int perf_test_result(struct evt_test *test, struct evt_options *opt); int
>> perf_opt_check(struct evt_options *opt, uint64_t nb_queues); int
>> perf_test_setup(struct evt_test *test, struct evt_options *opt); int
>> perf_ethdev_setup(struct evt_test *test, struct evt_options *opt);
>> +int perf_cryptodev_setup(struct evt_test *test, struct evt_options
>> +*opt);
>> int perf_mempool_setup(struct evt_test *test, struct evt_options *opt); int
>> perf_event_dev_port_setup(struct evt_test *test, struct evt_options *opt,
>> uint8_t stride, uint8_t nb_queues,
>> @@ -164,6 +179,7 @@ int perf_launch_lcores(struct evt_test *test, struct
>> evt_options *opt, void perf_opt_dump(struct evt_options *opt, uint8_t
>> nb_queues); void perf_test_destroy(struct evt_test *test, struct
>> evt_options *opt); void perf_eventdev_destroy(struct evt_test *test, struct
>> evt_options *opt);
>> +void perf_cryptodev_destroy(struct evt_test *test, struct evt_options
>> +*opt);
>> void perf_ethdev_destroy(struct evt_test *test, struct evt_options *opt);
>> void perf_mempool_destroy(struct evt_test *test, struct evt_options *opt);
>>
>> diff --git a/app/test-eventdev/test_perf_queue.c b/app/test-
>> eventdev/test_perf_queue.c
>> index f4ea3a795f..5657c8b3cd 100644
>> --- a/app/test-eventdev/test_perf_queue.c
>> +++ b/app/test-eventdev/test_perf_queue.c
>> @@ -49,6 +49,23 @@ perf_queue_worker(void *arg, const int
>> enable_fwd_latency)
>> rte_pause();
>> continue;
>> }
>> +
>> + if (prod_crypto_type &&
>> + (ev.event_type == RTE_EVENT_TYPE_CRYPTODEV)) {
>> + struct rte_crypto_op *op = ev.event_ptr;
>> +
>> + if (op->status ==
>> RTE_CRYPTO_OP_STATUS_SUCCESS) {
>> + if (op->sym->m_dst == NULL)
>> + ev.event_ptr = op->sym->m_src;
>> + else
>> + ev.event_ptr = op->sym->m_dst;
>> + rte_crypto_op_free(op);
>> + } else {
>> + rte_crypto_op_free(op);
>> + continue;
>In case of failure, ops are freed and "ev.event_ptr" won't be set to mbuf.
>What would be the expected test result?
>> + }
>> + }
>> +
>> if (enable_fwd_latency && !prod_timer_type)
>> /* first q in pipeline, mark timestamp to compute fwd latency
>> */
>> mark_fwd_latency(&ev, nb_stages);
>> @@ -88,6 +105,25 @@ perf_queue_worker_burst(void *arg, const int
>> enable_fwd_latency)
>> }
>>
>> for (i = 0; i < nb_rx; i++) {
>> + if (prod_crypto_type &&
>> + (ev[i].event_type ==
>> RTE_EVENT_TYPE_CRYPTODEV)) {
>> + struct rte_crypto_op *op = ev[i].event_ptr;
>> +
>> + if (op->status ==
>> + RTE_CRYPTO_OP_STATUS_SUCCESS) {
>> + if (op->sym->m_dst == NULL)
>> + ev[i].event_ptr =
>> + op->sym->m_src;
>> + else
>> + ev[i].event_ptr =
>> + op->sym->m_dst;
>> + rte_crypto_op_free(op);
>> + } else {
>> + rte_crypto_op_free(op);
>> + continue;
>> + }
>> + }
>> +
>> if (enable_fwd_latency && !prod_timer_type) {
>> rte_prefetch0(ev[i+1].event_ptr);
>> /* first queue in pipeline.
>> @@ -269,6 +305,20 @@ perf_queue_eventdev_setup(struct evt_test *test,
>> struct evt_options *opt)
>> return ret;
>> }
>> }
>> + } else if (opt->prod_type ==
>> EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
>> + uint8_t cdev_id, cdev_count;
>> +
>> + cdev_count = rte_cryptodev_count();
>> + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
>> + ret = rte_cryptodev_start(cdev_id);
>> + if (ret) {
>> + evt_err("Failed to start cryptodev %u",
>> + cdev_id);
>> + return ret;
>> + }
>> + }
>> +
>> + rte_event_crypto_adapter_start(t->crypto_adptr.id);
>> }
>>
>> return 0;
>> @@ -311,11 +361,13 @@ static const struct evt_test_ops perf_queue = {
>> .test_setup = perf_test_setup,
>> .mempool_setup = perf_mempool_setup,
>> .ethdev_setup = perf_ethdev_setup,
>> + .cryptodev_setup = perf_cryptodev_setup,
>> .eventdev_setup = perf_queue_eventdev_setup,
>> .launch_lcores = perf_queue_launch_lcores,
>> .eventdev_destroy = perf_eventdev_destroy,
>> .mempool_destroy = perf_mempool_destroy,
>> .ethdev_destroy = perf_ethdev_destroy,
>> + .cryptodev_destroy = perf_cryptodev_destroy,
>> .test_result = perf_test_result,
>> .test_destroy = perf_test_destroy,
>> };
>> diff --git a/doc/guides/tools/testeventdev.rst
>> b/doc/guides/tools/testeventdev.rst
>> index 48efb9ea6e..f7d813226d 100644
>> --- a/doc/guides/tools/testeventdev.rst
>> +++ b/doc/guides/tools/testeventdev.rst
>> @@ -120,6 +120,10 @@ The following are the application command-line
>> options:
>>
>> Use burst mode event timer adapter as producer.
>>
>> +* ``--prod_type_cryptodev``
>> +
>> + Use crypto device as producer.
>> +
>> * ``--timer_tick_nsec``
>>
>> Used to dictate number of nano seconds between bucket traversal of
>> the @@ -148,6 +152,11 @@ The following are the application command-line
>> options:
>> timeout is out of the supported range of event device it will be
>> adjusted to the highest/lowest supported dequeue timeout supported.
>>
>> +* ``--crypto_adptr_mode``
>> +
>> + Set crypto adapter mode. Use 0 for OP_NEW (default) and 1 for
>> + OP_FORWARD mode.
>> +
>> * ``--mbuf_sz``
>>
>> Set packet mbuf size. Can be used to configure Jumbo Frames. Only @@
>> -420,6 +429,7 @@ Supported application command line options are
>> following::
>> --prod_type_ethdev
>> --prod_type_timerdev_burst
>> --prod_type_timerdev
>> + --prod_type_cryptodev
>> --prod_enq_burst_sz
>> --timer_tick_nsec
>> --max_tmo_nsec
>> @@ -427,6 +437,7 @@ Supported application command line options are
>> following::
>> --nb_timers
>> --nb_timer_adptrs
>> --deq_tmo_nsec
>> + --crypto_adptr_mode
>>
>> Example
>> ^^^^^^^
>> @@ -529,12 +540,14 @@ Supported application command line options are
>> following::
>> --prod_type_ethdev
>> --prod_type_timerdev_burst
>> --prod_type_timerdev
>> + --prod_type_cryptodev
>> --timer_tick_nsec
>> --max_tmo_nsec
>> --expiry_nsec
>> --nb_timers
>> --nb_timer_adptrs
>> --deq_tmo_nsec
>> + --crypto_adptr_mode
>>
>> Example
>> ^^^^^^^
>> --
>> 2.25.1
next prev parent reply other threads:[~2022-01-24 6:09 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-20 19:53 [PATCH] " Shijith Thotton
2021-12-21 8:51 ` [PATCH v2] " Shijith Thotton
2021-12-30 11:56 ` Gujjar, Abhinandan S
2022-01-03 6:04 ` Shijith Thotton
2022-01-03 8:46 ` Gujjar, Abhinandan S
2022-01-03 9:14 ` Shijith Thotton
2022-01-04 15:28 ` Aaron Conole
2022-01-04 15:49 ` [EXT] " Shijith Thotton
2022-01-04 10:30 ` [PATCH v3] " Shijith Thotton
2022-01-21 12:25 ` Jerin Jacob
2022-01-23 16:56 ` Gujjar, Abhinandan S
2022-01-23 18:44 ` Gujjar, Abhinandan S
2022-01-24 6:09 ` Shijith Thotton [this message]
2022-01-24 6:59 ` Shijith Thotton
2022-01-25 14:15 ` Gujjar, Abhinandan S
2022-01-25 13:39 ` Gujjar, Abhinandan S
2022-02-08 17:00 ` Shijith Thotton
2022-02-14 15:26 ` Jerin Jacob
2022-02-14 15:31 ` Gujjar, Abhinandan S
2022-02-08 16:33 ` [PATCH v4] " Shijith Thotton
2022-02-15 6:03 ` Gujjar, Abhinandan S
2022-02-15 16:08 ` Shijith Thotton
2022-02-15 16:46 ` Gujjar, Abhinandan S
2022-02-15 16:56 ` [PATCH v5] " Shijith Thotton
2022-02-16 4:47 ` Gujjar, Abhinandan S
2022-02-16 7:08 ` Shijith Thotton
2022-02-16 7:49 ` Gujjar, Abhinandan S
2022-02-16 8:44 ` Jerin Jacob
2022-02-16 8:54 ` Jerin Jacob
2022-02-17 5:33 ` Gujjar, Abhinandan S
2022-02-21 13:10 ` Van Haaren, Harry
2022-02-22 7:03 ` Shijith Thotton
2022-02-23 9:02 ` Gujjar, Abhinandan S
2022-02-23 10:02 ` Shijith Thotton
2022-02-23 10:13 ` Van Haaren, Harry
2022-02-23 16:33 ` Gujjar, Abhinandan S
2022-02-23 17:02 ` Shijith Thotton
2022-02-17 6:56 ` [EXT] " Akhil Goyal
2022-02-18 12:00 ` Shijith Thotton
2022-02-18 12:11 ` [PATCH v6] " Shijith Thotton
2022-02-24 4:46 ` [PATCH v7] " Shijith Thotton
2022-02-24 6:18 ` Gujjar, Abhinandan S
2022-02-24 7:58 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CO6PR18MB441823F62F4A3CE7780B2E2FD95E9@CO6PR18MB4418.namprd18.prod.outlook.com \
--to=sthotton@marvell.com \
--cc=abhinandan.gujjar@intel.com \
--cc=anoobj@marvell.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=jerinj@marvell.com \
--cc=pbhagavatula@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).