From: Akhil Goyal <gakhil@marvell.com>
To: Olivier Matz <olivier.matz@6wind.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
"thomas@monjalon.net" <thomas@monjalon.net>,
"david.marchand@redhat.com" <david.marchand@redhat.com>,
"hemant.agrawal@nxp.com" <hemant.agrawal@nxp.com>,
Vamsi Krishna Attunuru <vattunuru@marvell.com>,
"ferruh.yigit@xilinx.com" <ferruh.yigit@xilinx.com>,
"andrew.rybchenko@oktetlabs.ru" <andrew.rybchenko@oktetlabs.ru>,
"konstantin.v.ananyev@yandex.ru" <konstantin.v.ananyev@yandex.ru>,
"jiawenwu@trustnetic.com" <jiawenwu@trustnetic.com>,
"yisen.zhuang@huawei.com" <yisen.zhuang@huawei.com>,
Igor Russkikh <irusskikh@marvell.com>,
"qiming.yang@intel.com" <qiming.yang@intel.com>,
Jerin Jacob Kollanukkaran <jerinj@marvell.com>,
Ankur Dwivedi <adwivedi@marvell.com>
Subject: RE: [EXT] Re: [PATCH 1/3] net: add MACsec header
Date: Tue, 27 Sep 2022 08:36:46 +0000 [thread overview]
Message-ID: <CO6PR18MB448404716776F59B1FEA2FE0D8559@CO6PR18MB4484.namprd18.prod.outlook.com> (raw)
In-Reply-To: <YzGgVJMIbfl8duPW@platinum>
Hi Olivier,
> > +#define RTE_MACSEC_TCI_E 0x08 /**< User data is encrypted */
> > +#define RTE_MACSEC_TCI_C 0x04 /**< User data was changed (because of
> encryption) */
>
E bit means the user data is encrypted if set. Above defines are mask to each of the fields in tci_an.
I would add a comment that these are masks to each of the fields.
C bit means the user data is changed (because of encryption)
>
> In [1], I can read the following, which is not similar:
>
> E and C bits used to determine if packet is encrypted
> • E, C = 1, 1 – Encrypted
> • E, C = 0, 0 – Authenticated-Only
>
> Is there any reference paper for macsec header?
The reference is IEEE802.1AE standard.
https://ieeexplore.ieee.org/document/8585421
>
> [1] https://www.marvell.com/content/dam/marvell/en/public-
> collateral/automotive-solutions/marvell-macsec-security-in-ethernet-based-
> vehicle-white-paper.pdf
>
>
> >
> > +#define RTE_MACSEC_NUM_AN 4 /**< 2 bits for the association
> number */
>
> I don't get how this defined is used. Can the comment be clarified?
In case of MACsec we can have 4 different SAs for each of the secure channel
Based on the AN field.
RTE_MACSEC_NUM_AN is basically added to make an upper limit to the array of SAs.
I will re-write the comment as
#define RTE_MACSEC_NUM_AN 4 /**< Max number of association numbers. */
Or shall I move it to rte_security?
>
> > +#define RTE_MACSEC_SALT_LEN 12 /**< Salt length for MACsec SA */
For MACsec SA configuration, Salt is used which has a fixed size of 12 bytes.
Do you want me to move it to rte_security?
>
> Same here.
>
> > +
> > +/**
> > + * MACsec Header
> > + */
> > +struct rte_macsec_hdr {
> > + /* SecTAG */
>
> Is the SecTAG comment required? Or maybe it should be moved
> above the struct?
>
> > + uint8_t tci_an; /**< Tag control information and Association number
> of SC */
>
> nit: duplicated spaces after uint8_t
>
> Can we use a bitfield here for tci and an, like you did for short_length?
Would it be really necessary to split it to bitfields.
Can we not use it like vtc_flow in rte_ipv6_hdr?
>
> Like this:
>
> uint8_t tci:6;
> uint8_t an:2;
>
> Or:
>
> uint8_t tci_version:1;
> uint8_t tci_es:1;
> uint8_t tci_sc:1;
> uint8_t tci_scb:1;
> uint8_t tci_e:1;
> uint8_t tci_c:1;
> uint8_t an:2;
>
> I think the 2nd one is easier to use.
>
> > +#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
> > + uint8_t short_length : 6; /**< Short Length */
> > + uint8_t unused : 2;
>
> nit: no spaces around ':'
>
> > +#elif RTE_BYTE_ORDER == RTE_BIG_ENDIAN
> > + uint8_t unused : 2;
> > + uint8_t short_length : 6;
> > +#endif
> > + rte_be32_t packet_number; /**< Packet number to support replay
> protection */
> > + uint8_t secure_channel_id[8]; /* optional */
>
> 8 -> RTE_MACSEC_SCI_LEN ?
>
> I think it would be more convenient to have another struct
> for the secure_channel_id.
Ok Can we use it like this
struct rte_macsec_sci_hdr {
uint8_t sci[RTE_MACSEC_SCI_LEN]; /**< Optional secure channel id. */
} __rte_packed;
struct rte_macsec_hdr {
uint8_t tci_an; /**< Tag control information and Association number of SC. */
#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
uint8_t short_length:6; /**< Short Length. */
uint8_t unused:2;
#elif RTE_BYTE_ORDER == RTE_BIG_ENDIAN
uint8_t unused:2;
uint8_t short_length:6; /**< Short Length. */
#endif
rte_be32_t packet_number; /**< Packet number to support replay protection. */
union {
uint8_t payload[0];
struct rte_macsec_sci_hdr sci[0];
};
} __rte_packed;
next prev parent reply other threads:[~2022-09-27 8:36 UTC|newest]
Thread overview: 166+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-14 18:46 [PATCH 0/3] security: support MACsec Akhil Goyal
2022-08-14 18:46 ` [PATCH 1/3] net: add MACsec header Akhil Goyal
2022-09-22 15:29 ` Akhil Goyal
2022-09-26 12:51 ` Olivier Matz
2022-09-26 13:41 ` [EXT] " Akhil Goyal
2022-09-27 8:36 ` Akhil Goyal [this message]
2022-08-14 18:46 ` [PATCH 2/3] security: support MACsec Akhil Goyal
2022-09-22 15:37 ` Akhil Goyal
2022-08-14 18:46 ` [PATCH 3/3] ethdev: add MACsec flow item Akhil Goyal
2022-08-15 12:49 ` Ori Kam
2022-09-28 12:22 ` [PATCH v2 0/3] security: support MACsec Akhil Goyal
2022-09-28 12:22 ` [PATCH v2 1/3] net: add MACsec header Akhil Goyal
2022-09-28 13:04 ` Olivier Matz
2022-09-28 13:44 ` Thomas Monjalon
2022-09-28 14:23 ` Ori Kam
2022-09-28 12:22 ` [PATCH v2 2/3] ethdev: add MACsec flow item Akhil Goyal
2022-09-28 12:22 ` [PATCH v2 3/3] security: support MACsec Akhil Goyal
2022-09-28 12:45 ` [PATCH 0/5] Support and test inline MACsec for cnxk Akhil Goyal
2022-09-28 12:45 ` [PATCH 1/5] common/cnxk: add ROC APIs for MACsec Akhil Goyal
2022-09-28 12:45 ` [PATCH 2/5] common/cnxk: derive hash key " Akhil Goyal
2022-09-28 12:45 ` [PATCH 3/5] net/cnxk: support MACsec Akhil Goyal
2022-09-28 12:45 ` [PATCH 4/5] test/security: add inline MACsec cases Akhil Goyal
2023-05-23 19:49 ` [PATCH 00/13] Add MACsec unit test cases Akhil Goyal
2023-05-23 19:49 ` [PATCH 01/13] security: add direction in SA/SC configuration Akhil Goyal
2023-05-23 19:49 ` [PATCH 02/13] security: add MACsec packet number threshold Akhil Goyal
2023-05-23 21:29 ` Stephen Hemminger
2023-05-24 7:12 ` [EXT] " Akhil Goyal
2023-05-24 8:09 ` Akhil Goyal
2023-05-23 19:49 ` [PATCH 03/13] test/security: add inline MACsec cases Akhil Goyal
2023-05-23 19:49 ` [PATCH 04/13] test/security: add MACsec integrity cases Akhil Goyal
2023-05-23 19:49 ` [PATCH 05/13] test/security: verify multi flow MACsec Akhil Goyal
2023-05-23 19:49 ` [PATCH 06/13] test/security: add MACsec VLAN cases Akhil Goyal
2023-05-23 19:49 ` [PATCH 07/13] test/security: add MACsec negative cases Akhil Goyal
2023-05-23 19:49 ` [PATCH 08/13] test/security: verify MACsec stats Akhil Goyal
2023-05-23 19:49 ` [PATCH 09/13] test/security: verify MACsec interrupts Akhil Goyal
2023-05-23 19:49 ` [PATCH 10/13] test/security: verify MACsec Tx HW rekey Akhil Goyal
2023-05-23 19:49 ` [PATCH 11/13] test/security: verify MACsec Rx rekey Akhil Goyal
2023-05-23 19:49 ` [PATCH 12/13] test/security: verify MACsec anti replay Akhil Goyal
2023-05-23 19:49 ` [PATCH 13/13] test/security: remove no MACsec support case Akhil Goyal
2023-06-07 15:19 ` [PATCH v2 00/13] Add MACsec unit test cases Akhil Goyal
2023-06-07 15:19 ` [PATCH v2 01/13] security: add direction in SA/SC configuration Akhil Goyal
2023-06-07 15:21 ` Akhil Goyal
2023-06-07 19:49 ` David Marchand
2023-06-08 6:58 ` [EXT] " Akhil Goyal
2023-06-07 15:19 ` [PATCH v2 02/13] security: add MACsec packet number threshold Akhil Goyal
2023-06-07 15:19 ` [PATCH v2 03/13] test/security: add inline MACsec cases Akhil Goyal
2023-06-07 15:19 ` [PATCH v2 04/13] test/security: add MACsec integrity cases Akhil Goyal
2023-06-07 15:19 ` [PATCH v2 05/13] test/security: verify multi flow MACsec Akhil Goyal
2023-06-07 15:19 ` [PATCH v2 06/13] test/security: add MACsec VLAN cases Akhil Goyal
2023-06-07 15:19 ` [PATCH v2 07/13] test/security: add MACsec negative cases Akhil Goyal
2023-06-07 15:19 ` [PATCH v2 08/13] test/security: verify MACsec stats Akhil Goyal
2023-06-07 15:19 ` [PATCH v2 09/13] test/security: verify MACsec interrupts Akhil Goyal
2023-06-07 15:19 ` [PATCH v2 10/13] test/security: verify MACsec Tx HW rekey Akhil Goyal
2023-06-07 15:19 ` [PATCH v2 11/13] test/security: verify MACsec Rx rekey Akhil Goyal
2023-06-07 15:19 ` [PATCH v2 12/13] test/security: verify MACsec anti replay Akhil Goyal
2023-06-07 15:19 ` [PATCH v2 13/13] test/security: remove no MACsec support case Akhil Goyal
2023-06-08 6:54 ` [PATCH v3 00/13] Add MACsec unit test cases Akhil Goyal
2023-06-08 6:54 ` [PATCH v3 01/13] security: add direction in SA/SC configuration Akhil Goyal
2023-06-08 6:54 ` [PATCH v3 02/13] security: add MACsec packet number threshold Akhil Goyal
2023-06-08 6:54 ` [PATCH v3 03/13] test/security: add inline MACsec cases Akhil Goyal
2023-06-08 6:54 ` [PATCH v3 04/13] test/security: add MACsec integrity cases Akhil Goyal
2023-06-08 6:54 ` [PATCH v3 05/13] test/security: verify multi flow MACsec Akhil Goyal
2023-06-08 6:54 ` [PATCH v3 06/13] test/security: add MACsec VLAN cases Akhil Goyal
2023-06-08 6:54 ` [PATCH v3 07/13] test/security: add MACsec negative cases Akhil Goyal
2023-06-08 6:54 ` [PATCH v3 08/13] test/security: verify MACsec stats Akhil Goyal
2023-06-08 6:54 ` [PATCH v3 09/13] test/security: verify MACsec interrupts Akhil Goyal
2023-06-08 6:54 ` [PATCH v3 10/13] test/security: verify MACsec Tx HW rekey Akhil Goyal
2023-06-08 6:54 ` [PATCH v3 11/13] test/security: verify MACsec Rx rekey Akhil Goyal
2023-06-08 6:54 ` [PATCH v3 12/13] test/security: verify MACsec anti replay Akhil Goyal
2023-06-08 6:54 ` [PATCH v3 13/13] test/security: remove no MACsec support case Akhil Goyal
2023-06-08 17:19 ` [PATCH v3 00/13] Add MACsec unit test cases Akhil Goyal
2022-09-28 12:45 ` [PATCH 5/5] test/security: add more MACsec cases Akhil Goyal
2023-05-23 20:03 ` [PATCH 00/15] net/cnxk: add MACsec support Akhil Goyal
2023-05-23 20:03 ` [PATCH 01/15] common/cnxk: add ROC MACsec initialization Akhil Goyal
2023-05-26 9:29 ` Jerin Jacob
2023-05-23 20:03 ` [PATCH 02/15] common/cnxk: add MACsec SA configuration Akhil Goyal
2023-05-26 10:16 ` Jerin Jacob
2023-05-23 20:03 ` [PATCH 03/15] common/cnxk: add MACsec SC configuration APIs Akhil Goyal
2023-05-23 20:03 ` [PATCH 04/15] common/cnxk: add MACsec secy and flow configuration Akhil Goyal
2023-05-23 20:03 ` [PATCH 05/15] common/cnxk: add MACsec PN and LMAC mode configuration Akhil Goyal
2023-05-26 10:20 ` Jerin Jacob
2023-05-23 20:03 ` [PATCH 06/15] common/cnxk: add MACsec stats Akhil Goyal
2023-05-23 20:03 ` [PATCH 07/15] common/cnxk: add MACsec interrupt APIs Akhil Goyal
2023-05-23 20:03 ` [PATCH 08/15] common/cnxk: add MACsec port configuration Akhil Goyal
2023-05-23 20:03 ` [PATCH 09/15] common/cnxk: add MACsec control " Akhil Goyal
2023-05-26 10:23 ` Jerin Jacob
2023-05-23 20:03 ` [PATCH 10/15] common/cnxk: add MACsec FIPS mbox Akhil Goyal
2023-05-23 20:03 ` [PATCH 11/15] common/cnxk: derive hash key for MACsec Akhil Goyal
2023-05-23 20:03 ` [PATCH 12/15] net/cnxk: add MACsec initialization Akhil Goyal
2023-05-23 20:03 ` [PATCH 13/15] net/cnxk: create/destroy MACsec SC/SA Akhil Goyal
2023-05-23 20:04 ` [PATCH 14/15] net/cnxk: add MACsec session and flow configuration Akhil Goyal
2023-05-23 20:04 ` [PATCH 15/15] net/cnxk: add MACsec stats Akhil Goyal
2023-06-13 9:46 ` Jerin Jacob
2023-06-07 15:28 ` [PATCH v2 00/15] net/cnxk: add MACsec support Akhil Goyal
2023-06-07 15:28 ` [PATCH v2 01/15] common/cnxk: add ROC MACsec initialization Akhil Goyal
2023-06-12 15:51 ` Jerin Jacob
2023-06-07 15:28 ` [PATCH v2 02/15] common/cnxk: add MACsec SA configuration Akhil Goyal
2023-06-07 15:28 ` [PATCH v2 03/15] common/cnxk: add MACsec SC configuration APIs Akhil Goyal
2023-06-07 15:28 ` [PATCH v2 04/15] common/cnxk: add MACsec secy and flow configuration Akhil Goyal
2023-06-07 15:28 ` [PATCH v2 05/15] common/cnxk: add MACsec PN and LMAC mode configuration Akhil Goyal
2023-06-07 15:28 ` [PATCH v2 06/15] common/cnxk: add MACsec stats Akhil Goyal
2023-06-07 15:28 ` [PATCH v2 07/15] common/cnxk: add MACsec interrupt APIs Akhil Goyal
2023-06-07 15:28 ` [PATCH v2 08/15] common/cnxk: add MACsec port configuration Akhil Goyal
2023-06-07 15:28 ` [PATCH v2 09/15] common/cnxk: add MACsec control " Akhil Goyal
2023-06-07 15:28 ` [PATCH v2 10/15] common/cnxk: add MACsec FIPS mbox Akhil Goyal
2023-06-07 15:28 ` [PATCH v2 11/15] common/cnxk: derive hash key for MACsec Akhil Goyal
2023-06-07 15:28 ` [PATCH v2 12/15] net/cnxk: add MACsec initialization Akhil Goyal
2023-06-07 15:28 ` [PATCH v2 13/15] net/cnxk: create/destroy MACsec SC/SA Akhil Goyal
2023-06-07 15:28 ` [PATCH v2 14/15] net/cnxk: add MACsec session and flow configuration Akhil Goyal
2023-06-07 15:28 ` [PATCH v2 15/15] net/cnxk: add MACsec stats Akhil Goyal
2023-06-13 7:15 ` [PATCH v3 00/15] net/cnxk: add MACsec support Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 01/15] common/cnxk: add ROC MACsec initialization Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 02/15] common/cnxk: add MACsec SA configuration Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 03/15] common/cnxk: add MACsec SC configuration APIs Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 04/15] common/cnxk: add MACsec secy and flow configuration Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 05/15] common/cnxk: add MACsec PN and LMAC mode configuration Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 06/15] common/cnxk: add MACsec stats Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 07/15] common/cnxk: add MACsec interrupt APIs Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 08/15] common/cnxk: add MACsec port configuration Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 09/15] common/cnxk: add MACsec control " Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 10/15] common/cnxk: add MACsec FIPS mbox Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 11/15] common/cnxk: derive hash key for MACsec Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 12/15] net/cnxk: add MACsec initialization Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 13/15] net/cnxk: create/destroy MACsec SC/SA Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 14/15] net/cnxk: add MACsec session and flow configuration Akhil Goyal
2023-06-13 7:16 ` [PATCH v3 15/15] net/cnxk: add MACsec stats Akhil Goyal
2023-06-13 10:19 ` [PATCH v4 00/15] net/cnxk: add MACsec support Akhil Goyal
2023-06-13 10:19 ` [PATCH v4 01/15] common/cnxk: add ROC MACsec initialization Akhil Goyal
2023-06-13 10:19 ` [PATCH v4 02/15] common/cnxk: add MACsec SA configuration Akhil Goyal
2023-06-13 10:19 ` [PATCH v4 03/15] common/cnxk: add MACsec SC configuration APIs Akhil Goyal
2023-06-13 10:19 ` [PATCH v4 04/15] common/cnxk: add MACsec secy and flow configuration Akhil Goyal
2023-06-13 10:19 ` [PATCH v4 05/15] common/cnxk: add MACsec PN and LMAC mode configuration Akhil Goyal
2023-06-13 10:20 ` [PATCH v4 06/15] common/cnxk: add MACsec stats Akhil Goyal
2023-06-13 10:20 ` [PATCH v4 07/15] common/cnxk: add MACsec interrupt APIs Akhil Goyal
2023-06-13 10:20 ` [PATCH v4 08/15] common/cnxk: add MACsec port configuration Akhil Goyal
2023-06-13 10:20 ` [PATCH v4 09/15] common/cnxk: add MACsec control " Akhil Goyal
2023-06-13 10:20 ` [PATCH v4 10/15] common/cnxk: add MACsec FIPS mbox Akhil Goyal
2023-06-13 10:20 ` [PATCH v4 11/15] common/cnxk: derive hash key for MACsec Akhil Goyal
2023-06-13 10:20 ` [PATCH v4 12/15] net/cnxk: add MACsec initialization Akhil Goyal
2023-06-13 10:20 ` [PATCH v4 13/15] net/cnxk: create/destroy MACsec SC/SA Akhil Goyal
2023-06-13 10:20 ` [PATCH v4 14/15] net/cnxk: add MACsec session and flow configuration Akhil Goyal
2023-06-13 10:20 ` [PATCH v4 15/15] net/cnxk: add MACsec stats Akhil Goyal
2023-06-13 15:26 ` Jerin Jacob
2023-06-14 13:08 ` [PATCH v5 00/15] net/cnxk: add MACsec support Akhil Goyal
2023-06-14 13:08 ` [PATCH v5 01/15] common/cnxk: add ROC MACsec initialization Akhil Goyal
2023-06-14 13:08 ` [PATCH v5 02/15] common/cnxk: add MACsec SA configuration Akhil Goyal
2023-06-14 13:08 ` [PATCH v5 03/15] common/cnxk: add MACsec SC configuration APIs Akhil Goyal
2023-06-14 13:08 ` [PATCH v5 04/15] common/cnxk: add MACsec secy and flow configuration Akhil Goyal
2023-06-14 13:08 ` [PATCH v5 05/15] common/cnxk: add MACsec PN and LMAC mode configuration Akhil Goyal
2023-06-14 13:08 ` [PATCH v5 06/15] common/cnxk: add MACsec stats Akhil Goyal
2023-06-14 13:08 ` [PATCH v5 07/15] common/cnxk: add MACsec interrupt APIs Akhil Goyal
2023-06-14 13:08 ` [PATCH v5 08/15] common/cnxk: add MACsec port configuration Akhil Goyal
2023-06-14 13:08 ` [PATCH v5 09/15] common/cnxk: add MACsec control " Akhil Goyal
2023-06-14 13:08 ` [PATCH v5 10/15] common/cnxk: add MACsec FIPS mbox Akhil Goyal
2023-06-14 13:08 ` [PATCH v5 11/15] common/cnxk: derive hash key for MACsec Akhil Goyal
2023-06-14 13:08 ` [PATCH v5 12/15] net/cnxk: add MACsec initialization Akhil Goyal
2023-06-14 13:08 ` [PATCH v5 13/15] net/cnxk: create/destroy MACsec SC/SA Akhil Goyal
2023-06-14 13:09 ` [PATCH v5 14/15] net/cnxk: add MACsec session and flow configuration Akhil Goyal
2023-06-14 13:09 ` [PATCH v5 15/15] net/cnxk: add MACsec stats Akhil Goyal
2023-06-15 7:03 ` Jerin Jacob
2022-09-28 12:52 ` [PATCH v2 0/3] security: support MACsec Akhil Goyal
2022-09-28 18:24 ` [PATCH v3 " Akhil Goyal
2022-09-28 18:24 ` [PATCH v3 1/3] net: add MACsec header Akhil Goyal
2022-09-28 18:24 ` [PATCH v3 2/3] ethdev: add MACsec flow item Akhil Goyal
2022-09-28 18:24 ` [PATCH v3 3/3] security: support MACsec Akhil Goyal
2022-09-28 20:04 ` [PATCH v3 0/3] " Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CO6PR18MB448404716776F59B1FEA2FE0D8559@CO6PR18MB4484.namprd18.prod.outlook.com \
--to=gakhil@marvell.com \
--cc=adwivedi@marvell.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@xilinx.com \
--cc=hemant.agrawal@nxp.com \
--cc=irusskikh@marvell.com \
--cc=jerinj@marvell.com \
--cc=jiawenwu@trustnetic.com \
--cc=konstantin.v.ananyev@yandex.ru \
--cc=olivier.matz@6wind.com \
--cc=qiming.yang@intel.com \
--cc=thomas@monjalon.net \
--cc=vattunuru@marvell.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).