From: Akhil Goyal <gakhil@marvell.com>
To: Amit Prakash Shukla <amitprakashs@marvell.com>,
Ruifeng Wang <ruifeng.wang@arm.com>,
Radu Nicolau <radu.nicolau@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
Jerin Jacob Kollanukkaran <jerinj@marvell.com>,
Amit Prakash Shukla <amitprakashs@marvell.com>,
"stable@dpdk.org" <stable@dpdk.org>
Subject: RE: [PATCH 3/3] examples/ipsec-secgw: compilation fix for GCC-12
Date: Tue, 23 Aug 2022 13:12:14 +0000 [thread overview]
Message-ID: <CO6PR18MB4484AA67C8DBEB78CFEBF861D8709@CO6PR18MB4484.namprd18.prod.outlook.com> (raw)
In-Reply-To: <20220823105742.2276506-3-amitprakashs@marvell.com>
> GCC 12 raises the following warning:
>
> meson --werror --buildtype=debugoptimized --cross-file
> config/arm/arm64_armv8_linux_gcc -Ddefault_library=shared
> -Dexamples=all build
> ninja -C build
>
> In file included from ../examples/ipsec-secgw/ipsec_lpm_neon.h:9,
> from ../examples/ipsec-secgw/ipsec_worker.c:16:
> In function 'send_multi_pkts',
> inlined from 'route6_pkts_neon' at
> ../examples/ipsec-secgw/ipsec_lpm_neon.h:170:2,
> inlined from 'ipsec_poll_mode_wrkr_inl_pr' at
> ../examples/ipsec-secgw/ipsec_worker.c:1257:4:
> ../examples/ipsec-secgw/ipsec_neon.h:261:21: error: 'dst_port' may be used
> uninitialized [-Werror=maybe-uninitialized]
> 261 | dlp = dst_port[i - 1];
> | ~~~~^~~~~~~~~~~~~~~~~
> In file included from ../examples/ipsec-secgw/ipsec_worker.c:16:
> ../examples/ipsec-secgw/ipsec_worker.c: In function
> 'ipsec_poll_mode_wrkr_inl_pr':
> ../examples/ipsec-secgw/ipsec_lpm_neon.h:118:17:
> note: 'dst_port' declared here
> 118 | int32_t dst_port[MAX_PKT_BURST];
> | ^~~~~~~~
>
> Fixes: ce23f7ceec6b (examples/ipsec-secgw: add support of NEON with poll
> mode)
> Cc: stable@dpdk.org
>
> Signed-off-by: Amit Prakash Shukla <amitprakashs@marvell.com>
> ---
> examples/ipsec-secgw/ipsec_lpm_neon.h | 10 ++++------
> 1 file changed, 4 insertions(+), 6 deletions(-)
>
> diff --git a/examples/ipsec-secgw/ipsec_lpm_neon.h b/examples/ipsec-
> secgw/ipsec_lpm_neon.h
> index 959a5a8666..25f0abcaf3 100644
> --- a/examples/ipsec-secgw/ipsec_lpm_neon.h
> +++ b/examples/ipsec-secgw/ipsec_lpm_neon.h
> @@ -115,7 +115,7 @@ static inline void
> route6_pkts_neon(struct rt_ctx *rt_ctx, struct rte_mbuf **pkts, int nb_rx)
> {
> uint8_t dst_ip6[MAX_PKT_BURST][16];
> - int32_t dst_port[MAX_PKT_BURST];
> + uint16_t dst_port[MAX_PKT_BURST];
> struct rte_ether_hdr *eth_hdr;
> struct rte_ipv6_hdr *ipv6_hdr;
> int32_t hop[MAX_PKT_BURST];
> @@ -157,17 +157,15 @@ route6_pkts_neon(struct rt_ctx *rt_ctx, struct
> rte_mbuf **pkts, int nb_rx)
> pkt = pkts[i];
> if (pkt->ol_flags & RTE_MBUF_F_TX_SEC_OFFLOAD) {
> /* Read hop from the SA */
> - dst_port[i] = get_hop_for_offload_pkt(pkt, 1);
> + dst_port[i] = (uint16_t)get_hop_for_offload_pkt(pkt,
> 1);
> } else {
> /* Need to use hop returned by lookup */
> - dst_port[i] = hop[lpm_pkts++];
> + dst_port[i] = (uint16_t)hop[lpm_pkts++];
> }
> - if (dst_port[i] == -1)
> - dst_port[i] = BAD_PORT;
get_hop_for_offload_pkt is returning -1, can you also return BAD_PORT from that
if there is error. And you would not need to typecast it explicitly to uin16_t.
> }
>
> /* Send packets */
> - send_multi_pkts(pkts, (uint16_t *)dst_port, nb_rx, 0, 0, false);
> + send_multi_pkts(pkts, dst_port, nb_rx, 0, 0, false);
> }
>
> /*
> --
> 2.25.1
next prev parent reply other threads:[~2022-08-23 13:12 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-23 10:57 [PATCH 1/3] net/i40e: " Amit Prakash Shukla
2022-08-23 10:57 ` [PATCH 2/3] net/qede/base: " Amit Prakash Shukla
2022-08-23 10:57 ` [PATCH 3/3] examples/ipsec-secgw: " Amit Prakash Shukla
2022-08-23 13:12 ` Akhil Goyal [this message]
2022-08-24 14:03 ` [PATCH 1/2] net/i40e: " Amit Prakash Shukla
2022-08-24 14:03 ` [PATCH 2/2] net/qede/base: " Amit Prakash Shukla
2022-10-06 9:52 ` Thomas Monjalon
2022-08-25 7:21 ` [PATCH 1/2] net/i40e: " Morten Brørup
2022-08-26 9:45 ` Amit Prakash Shukla
2022-08-26 10:32 ` Morten Brørup
2022-10-06 9:51 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CO6PR18MB4484AA67C8DBEB78CFEBF861D8709@CO6PR18MB4484.namprd18.prod.outlook.com \
--to=gakhil@marvell.com \
--cc=amitprakashs@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=radu.nicolau@intel.com \
--cc=ruifeng.wang@arm.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).