* [dpdk-dev] [PATCH] enic: disable debug traces
@ 2015-04-07 17:40 Thomas Monjalon
2015-04-08 3:29 ` Sujith Sankar (ssujith)
2015-04-09 8:32 ` Adrien Mazarguil
0 siblings, 2 replies; 6+ messages in thread
From: Thomas Monjalon @ 2015-04-07 17:40 UTC (permalink / raw)
To: ssujith; +Cc: dev
The function name is printed in each enic_ethdev function.
Disable it by default with a new build option.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
---
config/common_bsdapp | 1 +
config/common_linuxapp | 1 +
lib/librte_pmd_enic/enic_ethdev.c | 4 ++++
3 files changed, 6 insertions(+)
diff --git a/config/common_bsdapp b/config/common_bsdapp
index a8ba484..c2374c0 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -214,6 +214,7 @@ CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
+CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
#
# Compile burst-oriented VIRTIO PMD driver
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 0b25f34..0078dc9 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -211,6 +211,7 @@ CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
+CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
#
# Compile burst-oriented VIRTIO PMD driver
diff --git a/lib/librte_pmd_enic/enic_ethdev.c b/lib/librte_pmd_enic/enic_ethdev.c
index 4950ede..18fadfb 100644
--- a/lib/librte_pmd_enic/enic_ethdev.c
+++ b/lib/librte_pmd_enic/enic_ethdev.c
@@ -48,8 +48,12 @@
#include "vnic_enet.h"
#include "enic.h"
+#ifdef RTE_LIBRTE_ENIC_DEBUG
#define ENICPMD_FUNC_TRACE() \
RTE_LOG(DEBUG, PMD, "ENICPMD trace: %s\n", __func__)
+#else
+#define ENICPMD_FUNC_TRACE() do {} while (0)
+#endif
/*
* The set of PCI devices this driver supports
--
2.2.2
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [dpdk-dev] [PATCH] enic: disable debug traces
2015-04-07 17:40 [dpdk-dev] [PATCH] enic: disable debug traces Thomas Monjalon
@ 2015-04-08 3:29 ` Sujith Sankar (ssujith)
2015-04-09 8:32 ` Adrien Mazarguil
1 sibling, 0 replies; 6+ messages in thread
From: Sujith Sankar (ssujith) @ 2015-04-08 3:29 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
On 07/04/15 11:10 pm, "Thomas Monjalon" <thomas.monjalon@6wind.com> wrote:
>The function name is printed in each enic_ethdev function.
>Disable it by default with a new build option.
>
>Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
>---
> config/common_bsdapp | 1 +
> config/common_linuxapp | 1 +
> lib/librte_pmd_enic/enic_ethdev.c | 4 ++++
> 3 files changed, 6 insertions(+)
>
>diff --git a/config/common_bsdapp b/config/common_bsdapp
>index a8ba484..c2374c0 100644
>--- a/config/common_bsdapp
>+++ b/config/common_bsdapp
>@@ -214,6 +214,7 @@ CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
> # Compile burst-oriented Cisco ENIC PMD driver
> #
> CONFIG_RTE_LIBRTE_ENIC_PMD=y
>+CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
>
> #
> # Compile burst-oriented VIRTIO PMD driver
>diff --git a/config/common_linuxapp b/config/common_linuxapp
>index 0b25f34..0078dc9 100644
>--- a/config/common_linuxapp
>+++ b/config/common_linuxapp
>@@ -211,6 +211,7 @@ CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
> # Compile burst-oriented Cisco ENIC PMD driver
> #
> CONFIG_RTE_LIBRTE_ENIC_PMD=y
>+CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
>
> #
> # Compile burst-oriented VIRTIO PMD driver
>diff --git a/lib/librte_pmd_enic/enic_ethdev.c
>b/lib/librte_pmd_enic/enic_ethdev.c
>index 4950ede..18fadfb 100644
>--- a/lib/librte_pmd_enic/enic_ethdev.c
>+++ b/lib/librte_pmd_enic/enic_ethdev.c
>@@ -48,8 +48,12 @@
> #include "vnic_enet.h"
> #include "enic.h"
>
>+#ifdef RTE_LIBRTE_ENIC_DEBUG
> #define ENICPMD_FUNC_TRACE() \
> RTE_LOG(DEBUG, PMD, "ENICPMD trace: %s\n", __func__)
>+#else
>+#define ENICPMD_FUNC_TRACE() do {} while (0)
>+#endif
>
> /*
> * The set of PCI devices this driver supports
>--
>2.2.2
>
Acked-by: Sujith Sankar <ssujith@cisco.com>
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [dpdk-dev] [PATCH] enic: disable debug traces
2015-04-07 17:40 [dpdk-dev] [PATCH] enic: disable debug traces Thomas Monjalon
2015-04-08 3:29 ` Sujith Sankar (ssujith)
@ 2015-04-09 8:32 ` Adrien Mazarguil
2015-04-09 16:28 ` Stephen Hemminger
2015-04-13 20:12 ` Thomas Monjalon
1 sibling, 2 replies; 6+ messages in thread
From: Adrien Mazarguil @ 2015-04-09 8:32 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
On Tue, Apr 07, 2015 at 07:40:19PM +0200, Thomas Monjalon wrote:
> The function name is printed in each enic_ethdev function.
> Disable it by default with a new build option.
>
> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
> ---
> config/common_bsdapp | 1 +
> config/common_linuxapp | 1 +
> lib/librte_pmd_enic/enic_ethdev.c | 4 ++++
> 3 files changed, 6 insertions(+)
>
> diff --git a/config/common_bsdapp b/config/common_bsdapp
> index a8ba484..c2374c0 100644
> --- a/config/common_bsdapp
> +++ b/config/common_bsdapp
> @@ -214,6 +214,7 @@ CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
> # Compile burst-oriented Cisco ENIC PMD driver
> #
> CONFIG_RTE_LIBRTE_ENIC_PMD=y
> +CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
>
> #
> # Compile burst-oriented VIRTIO PMD driver
> diff --git a/config/common_linuxapp b/config/common_linuxapp
> index 0b25f34..0078dc9 100644
> --- a/config/common_linuxapp
> +++ b/config/common_linuxapp
> @@ -211,6 +211,7 @@ CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
> # Compile burst-oriented Cisco ENIC PMD driver
> #
> CONFIG_RTE_LIBRTE_ENIC_PMD=y
> +CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
>
> #
> # Compile burst-oriented VIRTIO PMD driver
> diff --git a/lib/librte_pmd_enic/enic_ethdev.c b/lib/librte_pmd_enic/enic_ethdev.c
> index 4950ede..18fadfb 100644
> --- a/lib/librte_pmd_enic/enic_ethdev.c
> +++ b/lib/librte_pmd_enic/enic_ethdev.c
> @@ -48,8 +48,12 @@
> #include "vnic_enet.h"
> #include "enic.h"
>
> +#ifdef RTE_LIBRTE_ENIC_DEBUG
> #define ENICPMD_FUNC_TRACE() \
> RTE_LOG(DEBUG, PMD, "ENICPMD trace: %s\n", __func__)
> +#else
> +#define ENICPMD_FUNC_TRACE() do {} while (0)
How about defining it as (void)0 instead of an empty do/while block?
Doing so will prevent warnings if this macro happens to be used in an
expression. RTE_LOG() supports it.
> +#endif
>
> /*
> * The set of PCI devices this driver supports
> --
> 2.2.2
--
Adrien Mazarguil
6WIND
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [dpdk-dev] [PATCH] enic: disable debug traces
2015-04-09 8:32 ` Adrien Mazarguil
@ 2015-04-09 16:28 ` Stephen Hemminger
2015-04-13 10:32 ` Adrien Mazarguil
2015-04-13 20:12 ` Thomas Monjalon
1 sibling, 1 reply; 6+ messages in thread
From: Stephen Hemminger @ 2015-04-09 16:28 UTC (permalink / raw)
To: Adrien Mazarguil; +Cc: dev
On Thu, 9 Apr 2015 10:32:24 +0200
Adrien Mazarguil <adrien.mazarguil@6wind.com> wrote:
> >
> > +#ifdef RTE_LIBRTE_ENIC_DEBUG
> > #define ENICPMD_FUNC_TRACE() \
> > RTE_LOG(DEBUG, PMD, "ENICPMD trace: %s\n", __func__)
> > +#else
> > +#define ENICPMD_FUNC_TRACE() do {} while (0)
>
> How about defining it as (void)0 instead of an empty do/while block?
>
> Doing so will prevent warnings if this macro happens to be used in an
> expression. RTE_LOG() supports it.
I kind of like the Linux printk trick since it then preserves the format checking
even if compiled out.
/*
* Dummy printk for disabled debugging statements to use whilst maintaining
* gcc's format and side-effect checking.
*/
static inline __printf(1, 2)
int no_printk(const char *fmt, ...)
{
return 0;
}
/* pr_devel() should produce zero code unless DEBUG is defined */
#ifdef DEBUG
#define pr_devel(fmt, ...) \
printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_devel(fmt, ...) \
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#endif
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [dpdk-dev] [PATCH] enic: disable debug traces
2015-04-09 16:28 ` Stephen Hemminger
@ 2015-04-13 10:32 ` Adrien Mazarguil
0 siblings, 0 replies; 6+ messages in thread
From: Adrien Mazarguil @ 2015-04-13 10:32 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: dev
On Thu, Apr 09, 2015 at 09:28:53AM -0700, Stephen Hemminger wrote:
> On Thu, 9 Apr 2015 10:32:24 +0200
> Adrien Mazarguil <adrien.mazarguil@6wind.com> wrote:
>
> > >
> > > +#ifdef RTE_LIBRTE_ENIC_DEBUG
> > > #define ENICPMD_FUNC_TRACE() \
> > > RTE_LOG(DEBUG, PMD, "ENICPMD trace: %s\n", __func__)
> > > +#else
> > > +#define ENICPMD_FUNC_TRACE() do {} while (0)
> >
> > How about defining it as (void)0 instead of an empty do/while block?
> >
> > Doing so will prevent warnings if this macro happens to be used in an
> > expression. RTE_LOG() supports it.
>
> I kind of like the Linux printk trick since it then preserves the format checking
> even if compiled out.
>
> /*
> * Dummy printk for disabled debugging statements to use whilst maintaining
> * gcc's format and side-effect checking.
> */
> static inline __printf(1, 2)
> int no_printk(const char *fmt, ...)
> {
> return 0;
> }
>
> /* pr_devel() should produce zero code unless DEBUG is defined */
> #ifdef DEBUG
> #define pr_devel(fmt, ...) \
> printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
> #else
> #define pr_devel(fmt, ...) \
> no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
> #endif
My only concern with this is that it cannot be done in a ISO C compliant
manner easily.
While "__printf()" can be defined to nothing when dealing with compilers
that do not support extensions, ", ## __VAR_ARGS__" will most likely fail
with -pedantic.
--
Adrien Mazarguil
6WIND
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH] enic: disable debug traces
2015-04-09 8:32 ` Adrien Mazarguil
2015-04-09 16:28 ` Stephen Hemminger
@ 2015-04-13 20:12 ` Thomas Monjalon
1 sibling, 0 replies; 6+ messages in thread
From: Thomas Monjalon @ 2015-04-13 20:12 UTC (permalink / raw)
To: Adrien Mazarguil, ssujith; +Cc: dev
2015-04-09 10:32, Adrien Mazarguil:
> On Tue, Apr 07, 2015 at 07:40:19PM +0200, Thomas Monjalon wrote:
> > The function name is printed in each enic_ethdev function.
> > Disable it by default with a new build option.
> >
> > Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
[...]
> > --- a/lib/librte_pmd_enic/enic_ethdev.c
> > +++ b/lib/librte_pmd_enic/enic_ethdev.c
> > @@ -48,8 +48,12 @@
> > #include "vnic_enet.h"
> > #include "enic.h"
> >
> > +#ifdef RTE_LIBRTE_ENIC_DEBUG
> > #define ENICPMD_FUNC_TRACE() \
> > RTE_LOG(DEBUG, PMD, "ENICPMD trace: %s\n", __func__)
> > +#else
> > +#define ENICPMD_FUNC_TRACE() do {} while (0)
>
> How about defining it as (void)0 instead of an empty do/while block?
>
> Doing so will prevent warnings if this macro happens to be used in an
> expression. RTE_LOG() supports it.
Applied with Adrien's suggestion.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-04-13 20:13 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-07 17:40 [dpdk-dev] [PATCH] enic: disable debug traces Thomas Monjalon
2015-04-08 3:29 ` Sujith Sankar (ssujith)
2015-04-09 8:32 ` Adrien Mazarguil
2015-04-09 16:28 ` Stephen Hemminger
2015-04-13 10:32 ` Adrien Mazarguil
2015-04-13 20:12 ` Thomas Monjalon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).