* [dpdk-dev] Compiling files with .S with GCC
@ 2015-04-26 16:53 Wiles, Keith
0 siblings, 0 replies; 6+ messages in thread
From: Wiles, Keith @ 2015-04-26 16:53 UTC (permalink / raw)
To: dev
Hi All,
I noticed in my builds with foo.S file I would get a warning from the
compiler the foo_s.o.tmp linker file will not be used as the code is not
linked. A strange error and the foo_s.o file would not be created. In the
mk/internal/rte.compile-pre.mk we have the following
# command to assemble a .S file to generate an object
ifeq ($(USE_HOST),1)
S_TO_O = $(CPP) $(HOST_CPPFLAGS) $($(@)_CPPFLAGS) $(HOST_EXTRA_CPPFLAGS)
$< $(@).tmp && \
$(HOSTAS) $(HOST_ASFLAGS) $($(@)_ASFLAGS) $(HOST_EXTRA_ASFLAGS) -o $@
$(@).tmp
S_TO_O_STR = $(subst ','\'',$(S_TO_O)) #'# fix syntax highlight
S_TO_O_DISP = $(if $(V),"$(S_TO_O_STR)"," HOSTAS $(@)")
else
S_TO_O = $(CPP) $(CPPFLAGS) $($(@)_CPPFLAGS) $(EXTRA_CPPFLAGS) $< -o
$(@).tmp && \
$(AS) $(ASFLAGS) $($(@)_ASFLAGS) $(EXTRA_ASFLAGS) -o $@ $(@).tmp
S_TO_O_STR = $(subst ','\'',$(S_TO_O)) #'# fix syntax highlight
S_TO_O_DISP = $(if $(V),"$(S_TO_O_STR)"," AS $(@)")
endif
I had to change the above Œ.tmp¹ strings to Œ.s¹ to remove this warning
and get the foo_s.o file created. Using the .s the file name becomes
foo_s.o.s
Did not try this with clang or any other compiler, but I expect we can
safely change the Œ.tmp¹ to Œ.s¹ IMO
Anyone else notice this problem?
Regards,
++Keith
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [dpdk-dev] Compiling files with .S with GCC
@ 2015-04-26 16:55 Wiles, Keith
2015-05-04 8:37 ` Olivier MATZ
0 siblings, 1 reply; 6+ messages in thread
From: Wiles, Keith @ 2015-04-26 16:55 UTC (permalink / raw)
To: Wiles, Keith, dev
On 4/26/15, 11:53 AM, "Wiles, Keith" <keith.wiles@intel.com> wrote:
>Hi All,
>
>I noticed in my builds with foo.S file I would get a warning from the
>compiler the foo_s.o.tmp linker file will not be used as the code is not
>linked. A strange error and the foo_s.o file would not be created. In the
>mk/internal/rte.compile-pre.mk we have the following
>
># command to assemble a .S file to generate an object
>ifeq ($(USE_HOST),1)
>S_TO_O = $(CPP) $(HOST_CPPFLAGS) $($(@)_CPPFLAGS) $(HOST_EXTRA_CPPFLAGS)
>$< $(@).tmp && \
> $(HOSTAS) $(HOST_ASFLAGS) $($(@)_ASFLAGS) $(HOST_EXTRA_ASFLAGS) -o $@
>$(@).tmp
>S_TO_O_STR = $(subst ','\'',$(S_TO_O)) #'# fix syntax highlight
>S_TO_O_DISP = $(if $(V),"$(S_TO_O_STR)"," HOSTAS $(@)")
>else
>S_TO_O = $(CPP) $(CPPFLAGS) $($(@)_CPPFLAGS) $(EXTRA_CPPFLAGS) $< -o
>$(@).tmp && \
> $(AS) $(ASFLAGS) $($(@)_ASFLAGS) $(EXTRA_ASFLAGS) -o $@ $(@).tmp
>S_TO_O_STR = $(subst ','\'',$(S_TO_O)) #'# fix syntax highlight
>S_TO_O_DISP = $(if $(V),"$(S_TO_O_STR)"," AS $(@)")
>endif
>
>I had to change the above Œ.tmp¹ strings to Œ.s¹ to remove this warning
>and get the foo_s.o file created. Using the .s the file name becomes
>foo_s.o.s
Compiler used on Ubuntu 14.04 'gcc (Ubuntu 4.8.2-19ubuntu1) 4.8.2'
>
>Did not try this with clang or any other compiler, but I expect we can
>safely change the Œ.tmp¹ to Œ.s¹ IMO
>
>Anyone else notice this problem?
>
>Regards,
>++Keith
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] Compiling files with .S with GCC
2015-04-26 16:55 Wiles, Keith
@ 2015-05-04 8:37 ` Olivier MATZ
2015-05-04 14:49 ` Wiles, Keith
0 siblings, 1 reply; 6+ messages in thread
From: Olivier MATZ @ 2015-05-04 8:37 UTC (permalink / raw)
To: Wiles, Keith, dev
Hello,
On 04/26/2015 06:55 PM, Wiles, Keith wrote:
>
>
> On 4/26/15, 11:53 AM, "Wiles, Keith" <keith.wiles@intel.com> wrote:
>
>> Hi All,
>>
>> I noticed in my builds with foo.S file I would get a warning from the
>> compiler the foo_s.o.tmp linker file will not be used as the code is not
>> linked. A strange error and the foo_s.o file would not be created. In the
>> mk/internal/rte.compile-pre.mk we have the following
>>
>> # command to assemble a .S file to generate an object
>> ifeq ($(USE_HOST),1)
>> S_TO_O = $(CPP) $(HOST_CPPFLAGS) $($(@)_CPPFLAGS) $(HOST_EXTRA_CPPFLAGS)
>> $< $(@).tmp && \
>> $(HOSTAS) $(HOST_ASFLAGS) $($(@)_ASFLAGS) $(HOST_EXTRA_ASFLAGS) -o $@
>> $(@).tmp
>> S_TO_O_STR = $(subst ','\'',$(S_TO_O)) #'# fix syntax highlight
>> S_TO_O_DISP = $(if $(V),"$(S_TO_O_STR)"," HOSTAS $(@)")
>> else
>> S_TO_O = $(CPP) $(CPPFLAGS) $($(@)_CPPFLAGS) $(EXTRA_CPPFLAGS) $< -o
>> $(@).tmp && \
>> $(AS) $(ASFLAGS) $($(@)_ASFLAGS) $(EXTRA_ASFLAGS) -o $@ $(@).tmp
>> S_TO_O_STR = $(subst ','\'',$(S_TO_O)) #'# fix syntax highlight
>> S_TO_O_DISP = $(if $(V),"$(S_TO_O_STR)"," AS $(@)")
>> endif
>>
>> I had to change the above Œ.tmp¹ strings to Œ.s¹ to remove this warning
>> and get the foo_s.o file created. Using the .s the file name becomes
>> foo_s.o.s
>
> Compiler used on Ubuntu 14.04 'gcc (Ubuntu 4.8.2-19ubuntu1) 4.8.2'
>
>>
>> Did not try this with clang or any other compiler, but I expect we can
>> safely change the Œ.tmp¹ to Œ.s¹ IMO
>>
>> Anyone else notice this problem?
I tested a similar use-case and I don't reproduce the issue.
I don't don't understand why replacing $(@).tmp by $(@).s would
solve it.
The file $(@).tmp is used as a temporary file to store the preprocessed
version of the $(@).s file. I agree that using the .s extension is not
a bad choice (see below), but to me it is not the proper solution to
your problem.
>From https://gcc.gnu.org/onlinedocs/gcc/Overall-Options.html
file.s
Assembler code.
file.S
file.sx
Assembler code that must be preprocessed.
Regards,
Olivier
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [dpdk-dev] Compiling files with .S with GCC
2015-05-04 8:37 ` Olivier MATZ
@ 2015-05-04 14:49 ` Wiles, Keith
2015-05-04 15:42 ` Olivier MATZ
0 siblings, 1 reply; 6+ messages in thread
From: Wiles, Keith @ 2015-05-04 14:49 UTC (permalink / raw)
To: Olivier MATZ, dev
On 5/4/15, 1:37 AM, "Olivier MATZ" <olivier.matz@6wind.com> wrote:
>Hello,
>
>On 04/26/2015 06:55 PM, Wiles, Keith wrote:
>>
>>
>> On 4/26/15, 11:53 AM, "Wiles, Keith" <keith.wiles@intel.com> wrote:
>>
>>> Hi All,
>>>
>>> I noticed in my builds with foo.S file I would get a warning from the
>>> compiler the foo_s.o.tmp linker file will not be used as the code is
>>>not
>>> linked. A strange error and the foo_s.o file would not be created. In
>>>the
>>> mk/internal/rte.compile-pre.mk we have the following
>>>
>>> # command to assemble a .S file to generate an object
>>> ifeq ($(USE_HOST),1)
>>> S_TO_O = $(CPP) $(HOST_CPPFLAGS) $($(@)_CPPFLAGS)
>>>$(HOST_EXTRA_CPPFLAGS)
>>> $< $(@).tmp && \
>>> $(HOSTAS) $(HOST_ASFLAGS) $($(@)_ASFLAGS) $(HOST_EXTRA_ASFLAGS) -o
>>>$@
>>> $(@).tmp
>>> S_TO_O_STR = $(subst ','\'',$(S_TO_O)) #'# fix syntax highlight
>>> S_TO_O_DISP = $(if $(V),"$(S_TO_O_STR)"," HOSTAS $(@)")
>>> else
>>> S_TO_O = $(CPP) $(CPPFLAGS) $($(@)_CPPFLAGS) $(EXTRA_CPPFLAGS) $< -o
>>> $(@).tmp && \
>>> $(AS) $(ASFLAGS) $($(@)_ASFLAGS) $(EXTRA_ASFLAGS) -o $@ $(@).tmp
>>> S_TO_O_STR = $(subst ','\'',$(S_TO_O)) #'# fix syntax highlight
>>> S_TO_O_DISP = $(if $(V),"$(S_TO_O_STR)"," AS $(@)")
>>> endif
>>>
>>> I had to change the above Œ.tmp¹ strings to Œ.s¹ to remove this warning
>>> and get the foo_s.o file created. Using the .s the file name becomes
>>> foo_s.o.s
>>
>> Compiler used on Ubuntu 14.04 'gcc (Ubuntu 4.8.2-19ubuntu1) 4.8.2'
>>
>>>
>>> Did not try this with clang or any other compiler, but I expect we can
>>> safely change the Œ.tmp¹ to Œ.s¹ IMO
>>>
>>> Anyone else notice this problem?
>
>I tested a similar use-case and I don't reproduce the issue.
>I don't don't understand why replacing $(@).tmp by $(@).s would
>solve it.
In the case I saw the compiler seemed to want the .s to under stand it was
not some other type of file. Not sure why the error occurred in my
external build. We can leave it using .tmp if you like, but I feel .s
would have been the correct name for the file.
If you think it needs to be changed to .s then you can submit a patch or I
can or just leave it along your option.
Regards,
++Keith
>
>The file $(@).tmp is used as a temporary file to store the preprocessed
>version of the $(@).s file. I agree that using the .s extension is not
>a bad choice (see below), but to me it is not the proper solution to
>your problem.
>
>From https://gcc.gnu.org/onlinedocs/gcc/Overall-Options.html
>
> file.s
> Assembler code.
> file.S
> file.sx
> Assembler code that must be preprocessed.
>
>Regards,
>Olivier
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] Compiling files with .S with GCC
2015-05-04 14:49 ` Wiles, Keith
@ 2015-05-04 15:42 ` Olivier MATZ
2015-05-04 16:05 ` Wiles, Keith
0 siblings, 1 reply; 6+ messages in thread
From: Olivier MATZ @ 2015-05-04 15:42 UTC (permalink / raw)
To: Wiles, Keith, dev
On 05/04/2015 04:49 PM, Wiles, Keith wrote:
>
>
> On 5/4/15, 1:37 AM, "Olivier MATZ" <olivier.matz@6wind.com> wrote:
>
>> Hello,
>>
>> On 04/26/2015 06:55 PM, Wiles, Keith wrote:
>>>
>>>
>>> On 4/26/15, 11:53 AM, "Wiles, Keith" <keith.wiles@intel.com> wrote:
>>>
>>>> Hi All,
>>>>
>>>> I noticed in my builds with foo.S file I would get a warning from the
>>>> compiler the foo_s.o.tmp linker file will not be used as the code is
>>>> not
>>>> linked. A strange error and the foo_s.o file would not be created. In
>>>> the
>>>> mk/internal/rte.compile-pre.mk we have the following
>>>>
>>>> # command to assemble a .S file to generate an object
>>>> ifeq ($(USE_HOST),1)
>>>> S_TO_O = $(CPP) $(HOST_CPPFLAGS) $($(@)_CPPFLAGS)
>>>> $(HOST_EXTRA_CPPFLAGS)
>>>> $< $(@).tmp && \
>>>> $(HOSTAS) $(HOST_ASFLAGS) $($(@)_ASFLAGS) $(HOST_EXTRA_ASFLAGS) -o
>>>> $@
>>>> $(@).tmp
>>>> S_TO_O_STR = $(subst ','\'',$(S_TO_O)) #'# fix syntax highlight
>>>> S_TO_O_DISP = $(if $(V),"$(S_TO_O_STR)"," HOSTAS $(@)")
>>>> else
>>>> S_TO_O = $(CPP) $(CPPFLAGS) $($(@)_CPPFLAGS) $(EXTRA_CPPFLAGS) $< -o
>>>> $(@).tmp && \
>>>> $(AS) $(ASFLAGS) $($(@)_ASFLAGS) $(EXTRA_ASFLAGS) -o $@ $(@).tmp
>>>> S_TO_O_STR = $(subst ','\'',$(S_TO_O)) #'# fix syntax highlight
>>>> S_TO_O_DISP = $(if $(V),"$(S_TO_O_STR)"," AS $(@)")
>>>> endif
>>>>
>>>> I had to change the above Œ.tmp¹ strings to Œ.s¹ to remove this warning
>>>> and get the foo_s.o file created. Using the .s the file name becomes
>>>> foo_s.o.s
>>>
>>> Compiler used on Ubuntu 14.04 'gcc (Ubuntu 4.8.2-19ubuntu1) 4.8.2'
>>>
>>>>
>>>> Did not try this with clang or any other compiler, but I expect we can
>>>> safely change the Œ.tmp¹ to Œ.s¹ IMO
>>>>
>>>> Anyone else notice this problem?
>>
>> I tested a similar use-case and I don't reproduce the issue.
>> I don't don't understand why replacing $(@).tmp by $(@).s would
>> solve it.
>
> In the case I saw the compiler seemed to want the .s to under stand it was
> not some other type of file. Not sure why the error occurred in my
> external build. We can leave it using .tmp if you like, but I feel .s
> would have been the correct name for the file.
Can you send a log of the error you've seen?
Can you reproduce it outside the dpdk framework by trying to assemble
a file called foo.tmp?
This would show that the problem really comes from the extension of
the file.
>
> If you think it needs to be changed to .s then you can submit a patch or I
> can or just leave it along your option.
Until we really understand the cause of the issue, I don't think this
should be changed. But I'm not opposed to change it if we have a good
justification.
Regards,
Olivier
>
> Regards,
> ++Keith
>>
>> The file $(@).tmp is used as a temporary file to store the preprocessed
>> version of the $(@).s file. I agree that using the .s extension is not
>> a bad choice (see below), but to me it is not the proper solution to
>> your problem.
>>
>>From https://gcc.gnu.org/onlinedocs/gcc/Overall-Options.html
>>
>> file.s
>> Assembler code.
>> file.S
>> file.sx
>> Assembler code that must be preprocessed.
>>
>> Regards,
>> Olivier
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] Compiling files with .S with GCC
2015-05-04 15:42 ` Olivier MATZ
@ 2015-05-04 16:05 ` Wiles, Keith
0 siblings, 0 replies; 6+ messages in thread
From: Wiles, Keith @ 2015-05-04 16:05 UTC (permalink / raw)
To: Olivier MATZ, dev
On 5/4/15, 8:42 AM, "Olivier MATZ" <olivier.matz@6wind.com> wrote:
>
>
>On 05/04/2015 04:49 PM, Wiles, Keith wrote:
>>
>>
>> On 5/4/15, 1:37 AM, "Olivier MATZ" <olivier.matz@6wind.com> wrote:
>>
>>> Hello,
>>>
>>> On 04/26/2015 06:55 PM, Wiles, Keith wrote:
>>>>
>>>>
>>>> On 4/26/15, 11:53 AM, "Wiles, Keith" <keith.wiles@intel.com> wrote:
>>>>
>>>>> Hi All,
>>>>>
>>>>> I noticed in my builds with foo.S file I would get a warning from the
>>>>> compiler the foo_s.o.tmp linker file will not be used as the code is
>>>>> not
>>>>> linked. A strange error and the foo_s.o file would not be created. In
>>>>> the
>>>>> mk/internal/rte.compile-pre.mk we have the following
>>>>>
>>>>> # command to assemble a .S file to generate an object
>>>>> ifeq ($(USE_HOST),1)
>>>>> S_TO_O = $(CPP) $(HOST_CPPFLAGS) $($(@)_CPPFLAGS)
>>>>> $(HOST_EXTRA_CPPFLAGS)
>>>>> $< $(@).tmp && \
>>>>> $(HOSTAS) $(HOST_ASFLAGS) $($(@)_ASFLAGS) $(HOST_EXTRA_ASFLAGS) -o
>>>>> $@
>>>>> $(@).tmp
>>>>> S_TO_O_STR = $(subst ','\'',$(S_TO_O)) #'# fix syntax highlight
>>>>> S_TO_O_DISP = $(if $(V),"$(S_TO_O_STR)"," HOSTAS $(@)")
>>>>> else
>>>>> S_TO_O = $(CPP) $(CPPFLAGS) $($(@)_CPPFLAGS) $(EXTRA_CPPFLAGS) $< -o
>>>>> $(@).tmp && \
>>>>> $(AS) $(ASFLAGS) $($(@)_ASFLAGS) $(EXTRA_ASFLAGS) -o $@ $(@).tmp
>>>>> S_TO_O_STR = $(subst ','\'',$(S_TO_O)) #'# fix syntax highlight
>>>>> S_TO_O_DISP = $(if $(V),"$(S_TO_O_STR)"," AS $(@)")
>>>>> endif
>>>>>
>>>>> I had to change the above Œ.tmp¹ strings to Œ.s¹ to remove this
>>>>>warning
>>>>> and get the foo_s.o file created. Using the .s the file name becomes
>>>>> foo_s.o.s
>>>>
>>>> Compiler used on Ubuntu 14.04 'gcc (Ubuntu 4.8.2-19ubuntu1) 4.8.2'
>>>>
>>>>>
>>>>> Did not try this with clang or any other compiler, but I expect we
>>>>>can
>>>>> safely change the Œ.tmp¹ to Œ.s¹ IMO
>>>>>
>>>>> Anyone else notice this problem?
>>>
>>> I tested a similar use-case and I don't reproduce the issue.
>>> I don't don't understand why replacing $(@).tmp by $(@).s would
>>> solve it.
>>
>> In the case I saw the compiler seemed to want the .s to under stand it
>>was
>> not some other type of file. Not sure why the error occurred in my
>> external build. We can leave it using .tmp if you like, but I feel .s
>> would have been the correct name for the file.
>
>Can you send a log of the error you've seen?
>Can you reproduce it outside the dpdk framework by trying to assemble
>a file called foo.tmp?
>This would show that the problem really comes from the extension of
>the file.
OK will try, but out of town this week.
>
>
>>
>> If you think it needs to be changed to .s then you can submit a patch
>>or I
>> can or just leave it along your option.
>
>Until we really understand the cause of the issue, I don't think this
>should be changed. But I'm not opposed to change it if we have a good
>justification.
>
>
>Regards,
>Olivier
>
>
>
>>
>> Regards,
>> ++Keith
>>>
>>> The file $(@).tmp is used as a temporary file to store the preprocessed
>>> version of the $(@).s file. I agree that using the .s extension is not
>>> a bad choice (see below), but to me it is not the proper solution to
>>> your problem.
>>>
>>>From https://gcc.gnu.org/onlinedocs/gcc/Overall-Options.html
>>>
>>> file.s
>>> Assembler code.
>>> file.S
>>> file.sx
>>> Assembler code that must be preprocessed.
>>>
>>> Regards,
>>> Olivier
>>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-05-04 16:06 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-26 16:53 [dpdk-dev] Compiling files with .S with GCC Wiles, Keith
2015-04-26 16:55 Wiles, Keith
2015-05-04 8:37 ` Olivier MATZ
2015-05-04 14:49 ` Wiles, Keith
2015-05-04 15:42 ` Olivier MATZ
2015-05-04 16:05 ` Wiles, Keith
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).