DPDK patches and discussions
 help / color / mirror / Atom feed
From: Raslan Darawsheh <rasland@mellanox.com>
To: "Iremonger, Bernard" <bernard.iremonger@intel.com>,
	"Wu, Jingjing" <jingjing.wu@intel.com>
Cc: Thomas Monjalon <thomas@monjalon.net>,
	"dev@dpdk.org" <dev@dpdk.org>,
	Shahaf Shuler <shahafs@mellanox.com>,
	"Xueming(Steven) Li" <xuemingl@mellanox.com>,
	Ori Katz <orik@mellanox.com>,
	"jerin.jacob@caviumnetworks.com" <jerin.jacob@caviumnetworks.com>,
	"david.marchand@6wind.com" <david.marchand@6wind.com>
Subject: Re: [dpdk-dev] [PATCH v2 1/3] app/testpmd: move dumping packets to a separate function
Date: Wed, 3 Oct 2018 15:11:28 +0000	[thread overview]
Message-ID: <DB5PR05MB12543ADA46ED6FD2EB533FF6C2E90@DB5PR05MB1254.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <8CEF83825BEC744B83065625E567D7C260D0B986@IRSMSX107.ger.corp.intel.com>

Hi Iremonger Berrnard, 

Thx for the review, you are right about that I'm fixing these issues and I'm sending a new version with the fixes now.

Kindest regards,
Raslan Darawsheh

> -----Original Message-----
> From: Iremonger, Bernard <bernard.iremonger@intel.com>
> Sent: Tuesday, October 2, 2018 4:36 PM
> To: Raslan Darawsheh <rasland@mellanox.com>; Wu, Jingjing
> <jingjing.wu@intel.com>
> Cc: Thomas Monjalon <thomas@monjalon.net>; dev@dpdk.org; Shahaf
> Shuler <shahafs@mellanox.com>; Xueming(Steven) Li
> <xuemingl@mellanox.com>; Ori Katz <orik@mellanox.com>;
> jerin.jacob@caviumnetworks.com; david.marchand@6wind.com
> Subject: RE: [PATCH v2 1/3] app/testpmd: move dumping packets to a
> separate function
> 
> Hi Raslan,
> 
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Raslan
> Darawsheh
> > Sent: Monday, September 24, 2018 1:49 PM
> > To: Wu, Jingjing <jingjing.wu@intel.com>
> > Cc: Thomas Monjalon <thomas@monjalon.net>; dev@dpdk.org; Shahaf
> Shuler
> > <shahafs@mellanox.com>; Raslan Darawsheh <rasland@mellanox.com>;
> > Xueming(Steven) Li <xuemingl@mellanox.com>; Ori Katz
> > <orik@mellanox.com>; jerin.jacob@caviumnetworks.com;
> > david.marchand@6wind.com
> > Subject: [dpdk-dev] [PATCH v2 1/3] app/testpmd: move dumping packets
> > to a separate function
> >
> > verbosity for the received/sent packets is needed in all of the
> > forwarding engines so moving it to be in a separate function
> >
> > Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
> > ---
> >  app/test-pmd/Makefile |   1 +
> 
> The app/test-pmd/meson.build  should be updated for the util.c file.
> 
> >  app/test-pmd/rxonly.c | 134 ++--------------------------------------------
> >  app/test-pmd/util.c   | 144
> > ++++++++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 148 insertions(+), 131 deletions(-)  create mode
> > 100644 app/test-pmd/util.c
> >
> <snip>
> > diff --git a/app/test-pmd/util.c b/app/test-pmd/util.c new file mode
> > 100644 index 0000000..97c8349
> > --- /dev/null
> > +++ b/app/test-pmd/util.c
> > @@ -0,0 +1,144 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2010-2018 Mellanox technology.
> > + */
> > +
> > +#include <stdio.h>
> > +
> > +#include <rte_net.h>
> > +#include <rte_mbuf.h>
> > +#include <rte_ether.h>
> > +#include <rte_ethdev.h>
> > +#include <rte_flow.h>
> > +
> > +#include "testpmd.h"
> > +
> > +static inline void
> > +print_ether_addr(const char *what, struct ether_addr *eth_addr) {
> > +	char buf[ETHER_ADDR_FMT_SIZE];
> > +	ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
> > +	printf("%s%s", what, buf);
> > +}
> > +
> > +static  inline void
> > +dump_pkt_burst(uint16_t port_id, uint16_t queue, struct rte_mbuf
> *pkts[],
> > +	      uint16_t nb_pkts, int is_rx)
> > +{
> > +	struct rte_mbuf  *mb;
> > +	struct ether_hdr *eth_hdr;
> > +	uint16_t eth_type;
> > +	uint64_t ol_flags;
> > +	uint16_t i, packet_type;
> > +	uint16_t is_encapsulation;
> > +	char buf[256];
> > +	struct rte_net_hdr_lens hdr_lens;
> > +	uint32_t sw_packet_type;
> > +
> > +	if (!nb_pkts)
> > +		return;
> > +	printf("port %u/queue %u: %s %u packets\n",
> > +		port_id, queue,
> > +	       is_rx ? "received" : "sent",
> > +	       (unsigned int) nb_pkts);
> > +	for (i = 0; i < nb_pkts; i++) {
> > +		mb = pkts[i];
> > +		eth_hdr = rte_pktmbuf_mtod(mb, struct ether_hdr *);
> > +		eth_type = RTE_BE_TO_CPU_16(eth_hdr->ether_type);
> > +		ol_flags = mb->ol_flags;
> > +		packet_type = mb->packet_type;
> > +		is_encapsulation = RTE_ETH_IS_TUNNEL_PKT(packet_type);
> > +
> > +		print_ether_addr("  src=", &eth_hdr->s_addr);
> > +		print_ether_addr(" - dst=", &eth_hdr->d_addr);
> > +		printf(" - type=0x%04x - length=%u - nb_segs=%d",
> > +		       eth_type, (unsigned int) mb->pkt_len,
> > +		       (int)mb->nb_segs);
> 
> Should the following line be reinstated here:
> 		if (ol_flags & PKT_RX_RSS_HASH) {
> 
> > +		printf(" - RSS hash=0x%x", (unsigned int) mb->hash.rss);
> > +		printf(" - RSS queue=0x%x", (unsigned int) queue);
> 
> Should the following line be reinstated here:
> 		}
> 
> > +		if (ol_flags & PKT_RX_FDIR) {
> > +			printf(" - FDIR matched ");
> > +			if (ol_flags & PKT_RX_FDIR_ID)
> > +				printf("ID=0x%x",
> > +				       mb->hash.fdir.hi);
> > +			else if (ol_flags & PKT_RX_FDIR_FLX)
> > +				printf("flex bytes=0x%08x %08x",
> > +				       mb->hash.fdir.hi, mb->hash.fdir.lo);
> > +			else
> > +				printf("hash=0x%x ID=0x%x ",
> > +				       mb->hash.fdir.hash, mb->hash.fdir.id);
> > +		}
> > +		if (ol_flags & PKT_RX_TIMESTAMP)
> > +			printf(" - timestamp %"PRIu64" ", mb->timestamp);
> > +		if (ol_flags & PKT_RX_VLAN_STRIPPED)
> > +			printf(" - VLAN tci=0x%x", mb->vlan_tci);
> > +		if (ol_flags & PKT_RX_QINQ_STRIPPED)
> > +			printf(" - QinQ VLAN tci=0x%x, VLAN tci outer=0x%x",
> > +			       mb->vlan_tci, mb->vlan_tci_outer);
> > +		if (mb->packet_type) {
> > +			rte_get_ptype_name(mb->packet_type, buf,
> > sizeof(buf));
> > +			printf(" - hw ptype: %s", buf);
> > +		}
> > +		sw_packet_type = rte_net_get_ptype(mb, &hdr_lens,
> > +						   RTE_PTYPE_ALL_MASK);
> > +		rte_get_ptype_name(sw_packet_type, buf, sizeof(buf));
> > +		printf(" - sw ptype: %s", buf);
> > +		if (sw_packet_type & RTE_PTYPE_L2_MASK)
> > +			printf(" - l2_len=%d", hdr_lens.l2_len);
> > +		if (sw_packet_type & RTE_PTYPE_L3_MASK)
> 
> The following blank line can be removed:
> 
> > +
> > +			printf(" - l4_len=%d", hdr_lens.l4_len);
> > +		if (sw_packet_type & RTE_PTYPE_TUNNEL_MASK)
> > +			printf(" - tunnel_len=%d", hdr_lens.tunnel_len);
> > +		if (sw_packet_type & RTE_PTYPE_INNER_L2_MASK)
> > +			printf(" - inner_l2_len=%d", hdr_lens.inner_l2_len);
> > +		if (sw_packet_type & RTE_PTYPE_INNER_L4_MASK)
> > +			printf(" - inner_l4_len=%d", hdr_lens.inner_l4_len);
> > +		if (is_encapsulation) {
> > +			struct ipv4_hdr *ipv4_hdr;
> > +			struct ipv6_hdr *ipv6_hdr;
> > +			struct udp_hdr *udp_hdr;
> > +			uint8_t l2_len;
> > +			uint8_t l3_len;
> > +			uint8_t l4_len;
> > +			uint8_t l4_proto;
> > +			struct  vxlan_hdr *vxlan_hdr;
> > +
> > +			l2_len  = sizeof(struct ether_hdr);
> > +
> > +			/* Do not support ipv4 option field */
> > +			if (RTE_ETH_IS_IPV4_HDR(packet_type)) {
> > +				l3_len = sizeof(struct ipv4_hdr);
> > +				ipv4_hdr = rte_pktmbuf_mtod_offset(mb,
> > +				struct ipv4_hdr *,
> > +				l2_len);
> > +				l4_proto = ipv4_hdr->next_proto_id;
> > +			} else {
> > +				l3_len = sizeof(struct ipv6_hdr);
> > +				ipv6_hdr = rte_pktmbuf_mtod_offset(mb,
> > +				struct ipv6_hdr *,
> > +				l2_len);
> > +				l4_proto = ipv6_hdr->proto;
> > +			}
> > +			if (l4_proto == IPPROTO_UDP) {
> > +				udp_hdr = rte_pktmbuf_mtod_offset(mb,
> > +				struct udp_hdr *,
> > +				l2_len + l3_len);
> > +				l4_len = sizeof(struct udp_hdr);
> > +				vxlan_hdr = rte_pktmbuf_mtod_offset(mb,
> > +				struct vxlan_hdr *,
> > +				l2_len + l3_len + l4_len);
> > +
> > +				printf(" - VXLAN packet: packet type =%d, "
> > +				       "Destination UDP port =%d, VNI = %d",
> > +				       packet_type,
> 
> Suggest using local variables for be_to_cpu conversions to solve long line
> issue.
> 
> > +				       RTE_BE_TO_CPU_16(udp_hdr-
> >dst_port),
> > +				       rte_be_to_cpu_32(vxlan_hdr->vx_vni)
> >>
> > 8);
> > +			}
> > +		}
> > +		printf(" - %s queue=0x%x", is_rx ? "Receive" : "Send",
> > +			(unsigned int) queue);
> > +		printf("\n");
> > +		rte_get_rx_ol_flag_list(mb->ol_flags, buf, sizeof(buf));
> > +		printf("  ol_flags: %s\n", buf);
> > +	}
> > +}
> > --
> > 2.7.4
> 
> Regards,
> 
> Bernard.
> 

  reply	other threads:[~2018-10-03 15:11 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-12  8:06 [dpdk-dev] [PATCH 1/2] app/testpmd: add a generic way for dumping packets Raslan Darawsheh
2018-09-12  8:06 ` [dpdk-dev] [PATCH 2/2] app/testpmd: use the generic function to dump packets Raslan Darawsheh
2018-09-13 16:43   ` David Marchand
2018-09-14  6:35     ` Jerin Jacob
2018-09-17 14:18       ` Raslan Darawsheh
2018-09-24 12:49   ` [dpdk-dev] [PATCH v2 1/3] app/testpmd: move dumping packets to a separate function Raslan Darawsheh
2018-09-24 12:49     ` [dpdk-dev] [PATCH v2 2/3] app/testpmd: add packet dump callback functions Raslan Darawsheh
2018-09-24 12:49     ` [dpdk-dev] [PATCH v2 3/3] app/testpmd: set packet dump based on verbosity level Raslan Darawsheh
2018-10-02 13:35     ` [dpdk-dev] [PATCH v2 1/3] app/testpmd: move dumping packets to a separate function Iremonger, Bernard
2018-10-03 15:11       ` Raslan Darawsheh [this message]
2018-10-03 15:16     ` [dpdk-dev] [PATCH v3 " Raslan Darawsheh
2018-10-03 15:16       ` [dpdk-dev] [PATCH v3 2/3] app/testpmd: add packet dump callback functions Raslan Darawsheh
2018-10-03 15:16       ` [dpdk-dev] [PATCH v3 3/3] app/testpmd: set packet dump based on verbosity level Raslan Darawsheh
2018-10-04 14:43       ` [dpdk-dev] [PATCH v3 1/3] app/testpmd: move dumping packets to a separate function Iremonger, Bernard
2018-10-07  7:38         ` Raslan Darawsheh
2018-10-07  7:38     ` [dpdk-dev] [PATCH v4 " Raslan Darawsheh
2018-10-07  7:38       ` [dpdk-dev] [PATCH v4 2/3] app/testpmd: add packet dump callback functions Raslan Darawsheh
2018-10-08 10:03         ` Iremonger, Bernard
2018-10-11 14:58         ` Ferruh Yigit
2018-10-16 10:11           ` Raslan Darawsheh
2018-10-07  7:38       ` [dpdk-dev] [PATCH v4 3/3] app/testpmd: set packet dump based on verbosity level Raslan Darawsheh
2018-10-08 10:04         ` Iremonger, Bernard
2018-10-11 15:00         ` Ferruh Yigit
2018-10-11 15:24           ` Iremonger, Bernard
2018-10-11 15:52             ` Ferruh Yigit
2018-10-11 16:39               ` Iremonger, Bernard
2018-10-17 12:34                 ` Ferruh Yigit
2018-10-08 10:01       ` [dpdk-dev] [PATCH v4 1/3] app/testpmd: move dumping packets to a separate function Iremonger, Bernard
2018-10-11 14:56       ` Ferruh Yigit
2018-10-16 10:10         ` Raslan Darawsheh
2018-10-16 13:11           ` Ferruh Yigit
2018-10-17  7:27       ` [dpdk-dev] [PATCH v5 " Raslan Darawsheh
2018-10-17  7:27         ` [dpdk-dev] [PATCH v5 2/3] app/testpmd: add packet dump callback functions Raslan Darawsheh
2018-10-17  7:27         ` [dpdk-dev] [PATCH v5 3/3] app/testpmd: set packet dump based on verbosity level Raslan Darawsheh
2018-10-17 12:27         ` [dpdk-dev] [PATCH v5 1/3] app/testpmd: move dumping packets to a separate function Ferruh Yigit
2018-10-17 12:59           ` Iremonger, Bernard
2018-10-17 15:22             ` Raslan Darawsheh
2018-10-17 15:22       ` [dpdk-dev] [PATCH v6 " Raslan Darawsheh
2018-10-17 15:22         ` [dpdk-dev] [PATCH v6 2/3] app/testpmd: add packet dump callback functions Raslan Darawsheh
2018-10-17 15:22         ` [dpdk-dev] [PATCH v6 3/3] app/testpmd: set packet dump based on verbosity level Raslan Darawsheh
2018-10-17 16:24           ` Iremonger, Bernard
2018-10-17 16:33             ` Ferruh Yigit
2018-10-18  8:19               ` Raslan Darawsheh
2018-10-18  8:33                 ` Ferruh Yigit
2018-10-18  8:47                   ` Raslan Darawsheh
2018-10-17 16:22         ` [dpdk-dev] [PATCH v6 1/3] app/testpmd: move dumping packets to a separate function Ferruh Yigit
2018-09-12 15:00 ` [dpdk-dev] [PATCH 1/2] app/testpmd: add a generic way for dumping packets Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DB5PR05MB12543ADA46ED6FD2EB533FF6C2E90@DB5PR05MB1254.eurprd05.prod.outlook.com \
    --to=rasland@mellanox.com \
    --cc=bernard.iremonger@intel.com \
    --cc=david.marchand@6wind.com \
    --cc=dev@dpdk.org \
    --cc=jerin.jacob@caviumnetworks.com \
    --cc=jingjing.wu@intel.com \
    --cc=orik@mellanox.com \
    --cc=shahafs@mellanox.com \
    --cc=thomas@monjalon.net \
    --cc=xuemingl@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).