From: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
To: "Juraj Linkeš" <juraj.linkes@pantheon.tech>,
"bruce.richardson@intel.com" <bruce.richardson@intel.com>,
"Ruifeng Wang" <Ruifeng.Wang@arm.com>,
"Phil Yang" <Phil.Yang@arm.com>,
"vcchunga@amazon.com" <vcchunga@amazon.com>,
"Dharmik Thakkar" <Dharmik.Thakkar@arm.com>,
"jerinjacobk@gmail.com" <jerinjacobk@gmail.com>,
"hemant.agrawal@nxp.com" <hemant.agrawal@nxp.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, nd <nd@arm.com>,
Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>,
nd <nd@arm.com>
Subject: Re: [dpdk-dev] [RFC PATCH 1/2] build: rework Arm build options
Date: Thu, 24 Sep 2020 04:19:03 +0000 [thread overview]
Message-ID: <DBAPR08MB581444BDD703651592EDF1F798390@DBAPR08MB5814.eurprd08.prod.outlook.com> (raw)
In-Reply-To: <1600867161-15673-2-git-send-email-juraj.linkes@pantheon.tech>
Thanks Juraj for the quick RFC. Few comments inline.
<snip>
>
> The current system can identify only the implementer and part number of
> the arm device we're targeting, which is enough to identify the target CPU.
> However, even the full MIDR information is not enough to identify the SoC
> we're targeting.
>
> Expand the "machine" meson variable to allow specifying the target arm SoC.
> The SoC identification implies the CPU, so drop the current MIDR based CPU
> identification in favor of user input, which is the only way to identify the
> target SoC. This implies that native builds are not possible. Instead do a
> default (non-optimized, but executable on any
> aarch64 device) build.
>
> Also use the machine custom property in cross files for cross builds.
>
> An example of where the current system is insufficient is the cortex-a72 CPU.
> These cores are used in a variety of SoC from Broadcomm, NXP, Huawei and
> others. The MIDR information would only identify the core, but there's not
> way to identify the SoC to fine tune the build to it.
>
> Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
> ---
> config/arm/arm64_armv8_linux_gcc | 28 ----
> config/arm/default/arm64_armv8_linux_gcc | 23 +++
> config/arm/default/meson.build | 8 +
> config/arm/meson.build | 139 +++++++++++-------
> .../{ => thunderx}/arm64_thunderx_linux_gcc | 2 +-
> config/arm/thunderx/meson.build | 18 +++
> .../thunderxt88/arm64_thunderxt88_linux_gcc | 16 ++
> config/arm/thunderxt88/meson.build | 18 +++
> config/meson.build | 9 +-
> 9 files changed, 177 insertions(+), 84 deletions(-) delete mode 100644
> config/arm/arm64_armv8_linux_gcc create mode 100644
> config/arm/default/arm64_armv8_linux_gcc
> create mode 100644 config/arm/default/meson.build rename
> config/arm/{ => thunderx}/arm64_thunderx_linux_gcc (92%) create mode
> 100644 config/arm/thunderx/meson.build create mode 100644
> config/arm/thunderxt88/arm64_thunderxt88_linux_gcc
> create mode 100644 config/arm/thunderxt88/meson.build
>
> diff --git a/config/arm/arm64_armv8_linux_gcc
> b/config/arm/arm64_armv8_linux_gcc
> deleted file mode 100644
> index 88f0ff9da..000000000
> --- a/config/arm/arm64_armv8_linux_gcc
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -[binaries]
> -c = 'aarch64-linux-gnu-gcc'
> -cpp = 'aarch64-linux-gnu-cpp'
> -ar = 'aarch64-linux-gnu-gcc-ar'
> -strip = 'aarch64-linux-gnu-strip'
> -pkgconfig = 'aarch64-linux-gnu-pkg-config'
> -pcap-config = ''
> -
> -[host_machine]
> -system = 'linux'
> -cpu_family = 'aarch64'
> -cpu = 'armv8-a'
> -endian = 'little'
> -
> -[properties]
> -implementor_id = 'generic'
> -
> -# Valid options for Arm's implementor_pn:
> -# 'default': valid for all armv8-a architectures (default value)
> -# '0xd03': cortex-a53
> -# '0xd04': cortex-a35
> -# '0xd05': cortex-a55
> -# '0xd07': cortex-a57
> -# '0xd08': cortex-a72
> -# '0xd09': cortex-a73
> -# '0xd0a': cortex-a75
> -# '0xd0b': cortex-a76
> -implementor_pn = 'default'
> diff --git a/config/arm/default/arm64_armv8_linux_gcc
> b/config/arm/default/arm64_armv8_linux_gcc
> new file mode 100644
> index 000000000..56efd7a05
> --- /dev/null
> +++ b/config/arm/default/arm64_armv8_linux_gcc
> @@ -0,0 +1,23 @@
> +[binaries]
> +c = 'aarch64-linux-gnu-gcc'
> +cpp = 'aarch64-linux-gnu-cpp'
> +ar = 'aarch64-linux-gnu-gcc-ar'
> +strip = 'aarch64-linux-gnu-strip'
> +pkgconfig = 'aarch64-linux-gnu-pkg-config'
> +pcap-config = ''
> +
> +[host_machine]
> +system = 'linux'
> +cpu_family = 'aarch64'
> +cpu = 'armv8-a'
> +endian = 'little'
> +
> +[properties]
> +# Valid values for the machine property are the soc names identified by
> +# directories in config/arm # Possible suffixes for socs:
> +# -mn-kc
> +# where m is the number of numa nodes and k is the number of lcores #
> +e.g. for thunderx soc the possible values are "thunderx" or "thunderx-1n-
> 48c"
Is it required to talk about the suffixes? I think the statement "Valid values for the machine property are the soc names identified by directories in config/arm" should be sufficient.
> +# the suffixes themselves need to be supported in
> +config/arm/<soc_dir>/meson.build machine = 'default'
IMO, "default" does not convey much information. Is it possible to change it without a deprecation notice? "generic" or "armv8" conveys more information.
Any opinions from others?
> diff --git a/config/arm/default/meson.build
> b/config/arm/default/meson.build new file mode 100644 index
> 000000000..5714d0084
> --- /dev/null
> +++ b/config/arm/default/meson.build
> @@ -0,0 +1,8 @@
> +flags = [
> + ['RTE_MACHINE', '"armv8a"'],
> + ['RTE_MAX_LCORE', 256],
> + ['RTE_USE_C11_MEM_MODEL', true],
> + ['RTE_CACHE_LINE_SIZE', 128]
> +]
> +
> +machine_args = ['-march=armv8-a+crc']
> diff --git a/config/arm/meson.build b/config/arm/meson.build index
> 8728051d5..05b790f40 100644
> --- a/config/arm/meson.build
> +++ b/config/arm/meson.build
> @@ -2,11 +2,11 @@
> # Copyright(c) 2017 Intel Corporation.
> # Copyright(c) 2017 Cavium, Inc
>
> -# for checking defines we need to use the correct compiler flags -march_opt
> = '-march=@0@'.format(machine)
> -
> -arm_force_native_march = false
> -arm_force_default_march = (machine == 'default')
> +if machine == 'native'
> + # arm doesn't support a native build - user input of soc is required
> + # default to the portable build instead of native
> + machine = 'default'
Do we need a message here to the user?
> +endif
>
> flags_common_default = [
> # Accelarate rte_memcpy. Be sure to run unit test
> (memcpy_perf_autotest) @@ -131,6 +131,7 @@ impl_dpaa = ['NXP DPAA',
> flags_dpaa, machine_args_generic] dpdk_conf.set('RTE_FORCE_INTRINSICS',
> 1)
>
> if not dpdk_conf.get('RTE_ARCH_64')
> + # armv7 build
> dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
> dpdk_conf.set('RTE_ARCH_ARM', 1)
> dpdk_conf.set('RTE_ARCH_ARMv7', 1)
> @@ -138,41 +139,9 @@ if not dpdk_conf.get('RTE_ARCH_64')
> # mk/machine/armv7a/rte.vars.mk sets it too
> machine_args += '-mfpu=neon'
> else
> + # aarch64 build
> dpdk_conf.set('RTE_CACHE_LINE_SIZE', 128)
> dpdk_conf.set('RTE_ARCH_ARM64', 1)
> -
> - machine = []
> - cmd_generic = ['generic', '', '', 'default', '']
> - cmd_output = cmd_generic # Set generic by default
> - machine_args = [] # Clear previous machine args
> - if arm_force_default_march and not meson.is_cross_build()
> - machine = impl_generic
> - impl_pn = 'default'
> - elif not meson.is_cross_build()
> - # The script returns ['Implementer', 'Variant', 'Architecture',
> - # 'Primary Part number', 'Revision']
> - detect_vendor = find_program(join_paths(
> - meson.current_source_dir(),
> 'armv8_machine.py'))
> - cmd = run_command(detect_vendor.path())
> - if cmd.returncode() == 0
> - cmd_output = cmd.stdout().to_lower().strip().split(' ')
> - endif
> - # Set to generic if variable is not found
> - machine = get_variable('impl_' + cmd_output[0], ['generic'])
> - if machine[0] == 'generic'
> - machine = impl_generic
> - cmd_output = cmd_generic
> - endif
> - impl_pn = cmd_output[3]
> - if arm_force_native_march == true
> - impl_pn = 'native'
> - endif
> - else
> - impl_id = meson.get_cross_property('implementor_id',
> 'generic')
> - impl_pn = meson.get_cross_property('implementor_pn',
> 'default')
> - machine = get_variable('impl_' + impl_id)
> - endif
> -
> # Apply Common Defaults. These settings may be overwritten by
> machine
> # settings later.
> foreach flag: flags_common_default
> @@ -181,30 +150,89 @@ else
> endif
> endforeach
>
> - message('Implementer : ' + machine[0])
> - foreach flag: machine[1]
> + soc = machine.split('-')[0]
> + # TODO make sure the subdir exists
> + subdir(soc)
> +
> + if soc != 'default'
> + # combine common and soc specific flags
> + # TODO check that soc is in the dict
> + flags = flags['common'] + flags[soc]
> + endif
> +
> + foreach flag: flags
> if flag.length() > 0
> dpdk_conf.set(flag[0], flag[1])
> endif
> endforeach
>
> - foreach marg: machine[2]
> - if marg[0] == impl_pn
> - foreach flag: marg[1]
> - if cc.has_argument(flag)
> - machine_args += flag
> - endif
> - endforeach
> - # Apply any extra machine specific flags.
> - foreach flag: marg.get(2, flags_default_extra)
> - if flag.length() > 0
> - dpdk_conf.set(flag[0], flag[1])
> - endif
> - endforeach
> + verified_machine_args = []
> +
> + foreach flag: machine_args
> + if cc.has_argument(flag)
> + verified_machine_args += flag
> + else
> + message('Unsupported machine flag "@0@",
> ignoring'.format(flag))
> endif
> endforeach
> + machine_args = verified_machine_args
> +
> +# machine = []
> +# cmd_generic = ['generic', '', '', 'default', '']
> +# cmd_output = cmd_generic # Set generic by default
> +# machine_args = [] # Clear previous machine args
> +# if arm_force_default_march and not meson.is_cross_build()
> +# machine = impl_generic
> +# impl_pn = 'default'
> +# elif not meson.is_cross_build()
Isn't this for native build? Do we still need this?
> +# # The script returns ['Implementer', 'Variant', 'Architecture',
> +# # 'Primary Part number', 'Revision']
> +# detect_vendor = find_program(join_paths(
> +# meson.current_source_dir(),
> 'armv8_machine.py'))
> +# cmd = run_command(detect_vendor.path())
> +# if cmd.returncode() == 0
> +# cmd_output = cmd.stdout().to_lower().strip().split(' ')
> +# endif
> +# # Set to generic if variable is not found
> +# machine = get_variable('impl_' + cmd_output[0], ['generic'])
> +# if machine[0] == 'generic'
> +# machine = impl_generic
> +# cmd_output = cmd_generic
> +# endif
> +# impl_pn = cmd_output[3]
> +# if arm_force_native_march == true
> +# impl_pn = 'native'
> +# endif
> +# else
> +# impl_id = meson.get_cross_property('implementor_id',
> 'generic')
> +# impl_pn = meson.get_cross_property('implementor_pn',
> 'default')
> +# machine = get_variable('impl_' + impl_id)
> +# endif
> +#
> +# message('Implementer : ' + machine[0])
> +# foreach flag: machine[1]
> +# if flag.length() > 0
> +# dpdk_conf.set(flag[0], flag[1])
> +# endif
> +# endforeach
> +#
> +# foreach marg: machine[2]
> +# if marg[0] == impl_pn
> +# foreach flag: marg[1]
> +# if cc.has_argument(flag)
> +# machine_args += flag
> +# endif
> +# endforeach
> +# # Apply any extra machine specific flags.
> +# foreach flag: marg.get(2, flags_default_extra)
> +# if flag.length() > 0
> +# dpdk_conf.set(flag[0], flag[1])
> +# endif
> +# endforeach
> +# endif
> +# endforeach
> endif
> -message(machine_args)
> +message('Using machine args: @0@'.format(machine_args))
>
> if (cc.get_define('__ARM_NEON', args: machine_args) != '' or
> cc.get_define('__aarch64__', args: machine_args) != '') @@ -225,3 +253,6
> @@ if cc.get_define('__ARM_FEATURE_CRYPTO', args: machine_args) != ''
> compile_time_cpuflags += ['RTE_CPUFLAG_AES',
> 'RTE_CPUFLAG_PMULL',
> 'RTE_CPUFLAG_SHA1', 'RTE_CPUFLAG_SHA2'] endif
> +
> +message('dpdk conf options after arm stuff: @0@'.format(dpdk_conf))
> +
> diff --git a/config/arm/arm64_thunderx_linux_gcc
> b/config/arm/thunderx/arm64_thunderx_linux_gcc
> similarity index 92%
> rename from config/arm/arm64_thunderx_linux_gcc
> rename to config/arm/thunderx/arm64_thunderx_linux_gcc
> index 6572ab615..e53a86e8f 100644
> --- a/config/arm/arm64_thunderx_linux_gcc
> +++ b/config/arm/thunderx/arm64_thunderx_linux_gcc
> @@ -13,4 +13,4 @@ cpu = 'armv8-a'
> endian = 'little'
>
> [properties]
> -implementor_id = '0x43'
> +machine = 'thunderx'
> diff --git a/config/arm/thunderx/meson.build
> b/config/arm/thunderx/meson.build new file mode 100644 index
> 000000000..873d79a64
> --- /dev/null
> +++ b/config/arm/thunderx/meson.build
> @@ -0,0 +1,18 @@
> +flags = {
> + 'common': [
> + ['RTE_CACHE_LINE_SIZE', 128],
> + ['RTE_MAX_VFIO_GROUPS', 128],
> + ['RTE_MACHINE', '"thunderx"'],
> + ['RTE_USE_C11_MEM_MODEL', false]
> + ],
> + 'thunderx': [
> + ['RTE_MAX_NUMA_NODES', 2],
> + ['RTE_MAX_LCORE', 96]
> + ],
> + 'thunderx-1n-48c': [
> + ['RTE_MAX_NUMA_NODES', 1],
> + ['RTE_MAX_LCORE', 48]
> + ]
> +}
> +
> +machine_args = ['-march=armv8-a+crc+crypto','-mcpu=thunderx']
> diff --git a/config/arm/thunderxt88/arm64_thunderxt88_linux_gcc
> b/config/arm/thunderxt88/arm64_thunderxt88_linux_gcc
> new file mode 100644
> index 000000000..9a622786c
> --- /dev/null
> +++ b/config/arm/thunderxt88/arm64_thunderxt88_linux_gcc
> @@ -0,0 +1,16 @@
> +[binaries]
> +c = 'aarch64-linux-gnu-gcc'
> +cpp = 'aarch64-linux-gnu-cpp'
> +ar = 'aarch64-linux-gnu-gcc-ar'
> +strip = 'aarch64-linux-gnu-strip'
> +pkgconfig = 'aarch64-linux-gnu-pkg-config'
> +pcap-config = ''
> +
> +[host_machine]
> +system = 'linux'
> +cpu_family = 'aarch64'
> +cpu = 'armv8-a'
> +endian = 'little'
> +
> +[properties]
> +machine = 'thunderxt88'
> diff --git a/config/arm/thunderxt88/meson.build
> b/config/arm/thunderxt88/meson.build
> new file mode 100644
> index 000000000..2aa5d2cdd
> --- /dev/null
> +++ b/config/arm/thunderxt88/meson.build
> @@ -0,0 +1,18 @@
> +flags = {
> + 'common': [
> + ['RTE_CACHE_LINE_SIZE', 128],
> + ['RTE_MAX_VFIO_GROUPS', 128],
> + ['RTE_MACHINE', '"thunderx"'],
> + ['RTE_USE_C11_MEM_MODEL', false]
> + ],
> + 'thunderxt88': [
> + ['RTE_MAX_NUMA_NODES', 2],
> + ['RTE_MAX_LCORE', 96]
> + ],
> + 'thunderxt88-1n-48c': [
> + ['RTE_MAX_NUMA_NODES', 1],
> + ['RTE_MAX_LCORE', 48]
> + ]
> +}
> +
> +machine_args = ['-mcpu=thunderxt88']
> diff --git a/config/meson.build b/config/meson.build index
> 69f2aeb60..177cbd49c 100644
> --- a/config/meson.build
> +++ b/config/meson.build
> @@ -63,7 +63,14 @@ meson.add_install_script('../buildtools/symlink-
> drivers-solibs.sh',
>
> # set the machine type and cflags for it if meson.is_cross_build()
> - machine = host_machine.cpu()
> + if not host_machine.cpu_family().startswith('aarch')
> + # don't change the machine config for aarch32/64 builds
> + # that config is set in the cross file to identify the soc
> + # we're building for
> + machine = host_machine.cpu()
> + else
> + machine = meson.get_cross_property('machine', 'default')
> + endif
> else
> machine = get_option('machine')
> endif
> --
> 2.20.1
next prev parent reply other threads:[~2020-09-24 4:19 UTC|newest]
Thread overview: 465+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-23 13:19 [dpdk-dev] [RFC PATCH 0/2] Arm build options rework Juraj Linkeš
2020-09-23 13:19 ` [dpdk-dev] [RFC PATCH 1/2] build: rework Arm build options Juraj Linkeš
2020-09-24 4:19 ` Honnappa Nagarahalli [this message]
2020-09-24 11:08 ` Juraj Linkeš
2020-09-24 19:17 ` Honnappa Nagarahalli
2020-09-24 22:08 ` Ali Saidi
[not found] ` <20200924220710.19937-1-alisaidi@amazon.com>
2020-09-28 19:39 ` Honnappa Nagarahalli
2020-09-23 13:19 ` [dpdk-dev] [RFC PATCH 2/2] build: disable drivers from file Juraj Linkeš
2020-09-23 13:58 ` Bruce Richardson
2020-09-24 8:31 ` Juraj Linkeš
2020-09-24 3:03 ` [dpdk-dev] [RFC PATCH 0/2] Arm build options rework Honnappa Nagarahalli
2020-10-13 14:54 ` [dpdk-dev] [RFC PATCH v2 0/6] " Juraj Linkeš
2020-10-13 14:54 ` [dpdk-dev] [RFC PATCH v2 1/6] build: rename default Arm build to generic-armv8 Juraj Linkeš
2020-10-13 14:54 ` [dpdk-dev] [RFC PATCH v2 2/6] build: refactor Arm build Juraj Linkeš
2020-10-13 14:54 ` [dpdk-dev] [RFC PATCH v2 3/6] build: automatic NUMA and cpu counts detection Juraj Linkeš
2020-10-13 15:47 ` Bruce Richardson
2020-10-14 6:04 ` Juraj Linkeš
2020-10-14 8:16 ` Bruce Richardson
2020-10-14 8:52 ` Juraj Linkeš
2020-10-14 9:22 ` Bruce Richardson
2020-10-13 14:54 ` [dpdk-dev] [RFC PATCH v2 4/6] build: move core and NUMA counts to cross files Juraj Linkeš
2020-10-13 14:54 ` [dpdk-dev] [RFC PATCH v2 5/6] build: disable Arm drivers Juraj Linkeš
2020-10-13 15:49 ` Bruce Richardson
2020-10-13 14:54 ` [dpdk-dev] [RFC PATCH v2 6/6] build: update Arm builds with makefile flags Juraj Linkeš
2020-10-21 11:37 ` [dpdk-dev] [RFC PATCH v3 0/6] Arm build options rework Juraj Linkeš
2020-10-21 11:37 ` [dpdk-dev] [RFC PATCH v3 1/6] build: rename default Arm build to generic-armv8 Juraj Linkeš
2020-10-21 11:52 ` Bruce Richardson
2020-10-21 12:17 ` Juraj Linkeš
2020-10-21 11:37 ` [dpdk-dev] [RFC PATCH v3 2/6] build: refactor Arm build Juraj Linkeš
2020-10-21 11:37 ` [dpdk-dev] [RFC PATCH v3 3/6] build: automatic NUMA and cpu counts detection Juraj Linkeš
2020-10-21 12:02 ` Bruce Richardson
2020-10-21 13:01 ` Juraj Linkeš
2020-10-21 14:13 ` Bruce Richardson
2020-10-21 14:27 ` Bruce Richardson
2020-10-23 10:07 ` Juraj Linkeš
2020-10-27 10:30 ` Bruce Richardson
2020-10-29 4:31 ` Honnappa Nagarahalli
2020-11-02 13:55 ` Bruce Richardson
2020-11-02 19:01 ` Honnappa Nagarahalli
2020-11-03 9:44 ` Bruce Richardson
2020-11-05 9:23 ` Juraj Linkeš
2020-11-06 23:40 ` Honnappa Nagarahalli
2020-10-21 11:37 ` [dpdk-dev] [RFC PATCH v3 4/6] build: move core and NUMA counts to cross files Juraj Linkeš
2020-10-21 11:37 ` [dpdk-dev] [RFC PATCH v3 5/6] build: disable Arm drivers Juraj Linkeš
2020-10-21 11:37 ` [dpdk-dev] [RFC PATCH v3 6/6] build: update Arm builds with makefile flags Juraj Linkeš
2020-10-23 14:48 ` [dpdk-dev] [PATCH v4 0/6] Arm build options rework Juraj Linkeš
2020-10-23 14:48 ` [dpdk-dev] [PATCH v4 1/6] build: alias default build as generic Juraj Linkeš
2020-10-27 3:53 ` Honnappa Nagarahalli
2020-10-27 7:46 ` Juraj Linkeš
2020-10-23 14:48 ` [dpdk-dev] [PATCH v4 2/6] build: refactor Arm build Juraj Linkeš
2020-10-27 4:56 ` Honnappa Nagarahalli
2020-10-27 8:10 ` Juraj Linkeš
2020-10-27 9:12 ` Juraj Linkeš
2020-10-27 23:17 ` Honnappa Nagarahalli
2020-10-27 23:12 ` Honnappa Nagarahalli
2020-10-28 16:59 ` Honnappa Nagarahalli
2020-10-29 9:12 ` Juraj Linkeš
2020-10-29 20:54 ` Honnappa Nagarahalli
2020-10-30 10:45 ` Juraj Linkeš
2020-11-02 19:32 ` Honnappa Nagarahalli
2020-11-03 10:54 ` Juraj Linkeš
2020-10-23 14:48 ` [dpdk-dev] [PATCH v4 3/6] build: optional NUMA and cpu counts detection Juraj Linkeš
2020-10-27 11:20 ` Bruce Richardson
2020-10-27 15:50 ` Juraj Linkeš
2020-10-27 16:04 ` Bruce Richardson
2020-10-23 14:48 ` [dpdk-dev] [PATCH v4 4/6] build: add core and NUMA counts to cross files Juraj Linkeš
2020-10-23 14:48 ` [dpdk-dev] [PATCH v4 5/6] build: disable Arm drivers Juraj Linkeš
2020-10-23 14:48 ` [dpdk-dev] [PATCH v4 6/6] build: update Arm builds with makefile flags Juraj Linkeš
2020-10-27 3:53 ` [dpdk-dev] [PATCH v4 0/6] Arm build options rework Honnappa Nagarahalli
2020-10-27 7:50 ` Juraj Linkeš
2020-10-28 14:03 ` [dpdk-dev] [PATCH v5 00/11] " Juraj Linkeš
2020-10-28 14:03 ` [dpdk-dev] [PATCH v5 01/11] build: alias default build as generic Juraj Linkeš
2020-10-28 14:43 ` Bruce Richardson
2020-10-28 14:03 ` [dpdk-dev] [PATCH v5 02/11] build: rename Arm build variables Juraj Linkeš
2020-11-02 6:50 ` Ruifeng Wang
2020-10-28 14:03 ` [dpdk-dev] [PATCH v5 03/11] build: remove unused or superfluous variables Juraj Linkeš
2020-11-02 7:31 ` Ruifeng Wang
2020-10-28 14:03 ` [dpdk-dev] [PATCH v5 04/11] build: Arm reformat, comments, move config Juraj Linkeš
2020-11-02 8:29 ` Ruifeng Wang
2020-10-28 14:03 ` [dpdk-dev] [PATCH v5 05/11] build: simplify how Arm flags are processed Juraj Linkeš
2020-10-28 14:04 ` [dpdk-dev] [PATCH v5 06/11] build: use dict in Arm part number config Juraj Linkeš
2020-10-28 14:04 ` [dpdk-dev] [PATCH v5 07/11] build: Arm generic and native build setup Juraj Linkeš
2020-10-28 14:04 ` [dpdk-dev] [PATCH v5 08/11] build: optional NUMA and cpu counts detection Juraj Linkeš
2020-10-28 15:04 ` Bruce Richardson
2020-10-30 11:04 ` Juraj Linkeš
2020-10-28 14:04 ` [dpdk-dev] [PATCH v5 09/11] build: add core and NUMA counts to cross files Juraj Linkeš
2020-10-28 14:04 ` [dpdk-dev] [PATCH v5 10/11] build: disable Arm drivers Juraj Linkeš
2020-10-28 14:04 ` [dpdk-dev] [PATCH v5 11/11] build: update Arm builds with makefile flags Juraj Linkeš
2020-10-28 15:08 ` Bruce Richardson
2020-10-30 11:28 ` Juraj Linkeš
2020-10-30 13:38 ` Juraj Linkeš
2020-11-02 13:21 ` [dpdk-dev] [PATCH v6 00/11] Arm build options rework Juraj Linkeš
2020-11-02 13:21 ` [dpdk-dev] [PATCH v6 01/11] build: alias default build as generic Juraj Linkeš
2020-11-02 13:21 ` [dpdk-dev] [PATCH v6 02/11] build: rename Arm build variables Juraj Linkeš
2020-11-02 13:21 ` [dpdk-dev] [PATCH v6 03/11] build: remove unused or superfluous variables Juraj Linkeš
2020-11-02 13:21 ` [dpdk-dev] [PATCH v6 04/11] build: reformat and move Arm config and comments Juraj Linkeš
2020-11-02 13:21 ` [dpdk-dev] [PATCH v6 05/11] build: simplify how Arm flags are processed Juraj Linkeš
2020-11-02 13:21 ` [dpdk-dev] [PATCH v6 06/11] build: use dict in Arm part number config Juraj Linkeš
2020-11-02 13:21 ` [dpdk-dev] [PATCH v6 07/11] build: streamline Arm build setup and machine args Juraj Linkeš
2020-11-02 13:21 ` [dpdk-dev] [PATCH v6 08/11] build: optional NUMA and cpu counts detection Juraj Linkeš
2020-11-02 14:44 ` Bruce Richardson
2020-11-02 13:21 ` [dpdk-dev] [PATCH v6 09/11] build: add core and NUMA counts to cross files Juraj Linkeš
2020-11-02 13:21 ` [dpdk-dev] [PATCH v6 10/11] build: disable Arm drivers Juraj Linkeš
2020-11-02 13:21 ` [dpdk-dev] [PATCH v6 11/11] build: disable libnuma in cross builds Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 00/14] Arm build options rework Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 01/14] build: alias default build as generic Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 02/14] build: rename Arm build variables Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 03/14] build: remove unused or superfluous variables Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 04/14] build: reformat and move Arm config and comments Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 05/14] build: simplify how Arm flags are processed Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 06/14] build: organize Arm config into dict Juraj Linkeš
2020-11-05 14:09 ` Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 07/14] build: isolate configuration for generic build Juraj Linkeš
2020-11-05 14:09 ` Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 08/14] build: use native machine args in Arm native build Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 09/14] ci: switch to generic Arm builds Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 10/14] build: optional NUMA and cpu counts detection Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 11/14] build: add core and NUMA counts to cross files Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 12/14] build: disable Arm drivers Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 13/14] build: disable libnuma in cross builds Juraj Linkeš
2020-11-05 13:59 ` [dpdk-dev] [PATCH v7 14/14] build: add Arm SoC meson option Juraj Linkeš
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 00/14] Arm build options rework Juraj Linkeš
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 01/14] build: alias default build as generic Juraj Linkeš
2020-11-06 23:52 ` Honnappa Nagarahalli
2020-11-09 12:12 ` Juraj Linkeš
2020-11-09 12:47 ` Bruce Richardson
2020-11-09 22:54 ` Honnappa Nagarahalli
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 02/14] build: rename Arm build variables Juraj Linkeš
2020-11-07 0:47 ` Honnappa Nagarahalli
2020-11-07 0:51 ` Honnappa Nagarahalli
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 03/14] build: remove unused or superfluous variables Juraj Linkeš
2020-11-07 0:52 ` Honnappa Nagarahalli
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 04/14] build: reformat and move Arm config and comments Juraj Linkeš
2020-11-08 2:51 ` Honnappa Nagarahalli
2020-11-09 12:48 ` Juraj Linkeš
2020-11-10 0:02 ` Honnappa Nagarahalli
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 05/14] build: simplify how Arm flags are processed Juraj Linkeš
2020-11-08 3:19 ` Honnappa Nagarahalli
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 06/14] build: organize Arm config into dict Juraj Linkeš
2020-11-08 19:45 ` Honnappa Nagarahalli
2020-11-09 10:38 ` Juraj Linkeš
2020-11-09 23:15 ` Honnappa Nagarahalli
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 07/14] build: isolate configuration for generic build Juraj Linkeš
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 08/14] build: use native machine args in Arm native build Juraj Linkeš
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 09/14] ci: switch to generic Arm builds Juraj Linkeš
2020-11-08 14:42 ` Honnappa Nagarahalli
2020-11-11 11:45 ` Juraj Linkeš
2020-11-11 14:52 ` Ruifeng Wang
2020-11-11 16:19 ` Juraj Linkeš
2020-11-11 23:47 ` Honnappa Nagarahalli
2020-11-12 10:36 ` Ruifeng Wang
2020-11-12 12:43 ` Juraj Linkeš
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 10/14] build: optional NUMA and cpu counts detection Juraj Linkeš
2020-11-09 22:52 ` Honnappa Nagarahalli
2020-11-10 8:30 ` Juraj Linkeš
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 11/14] build: add core and NUMA counts to cross files Juraj Linkeš
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 12/14] build: disable Arm drivers Juraj Linkeš
2020-11-08 20:19 ` Honnappa Nagarahalli
2020-11-09 10:52 ` Juraj Linkeš
2020-11-09 23:27 ` Honnappa Nagarahalli
2020-11-10 9:03 ` Juraj Linkeš
2020-11-10 15:13 ` Honnappa Nagarahalli
2020-11-11 10:10 ` Juraj Linkeš
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 13/14] build: disable libnuma in cross builds Juraj Linkeš
2020-11-09 0:24 ` Honnappa Nagarahalli
2020-11-09 11:10 ` Juraj Linkeš
2020-11-09 23:29 ` Honnappa Nagarahalli
2020-11-06 8:03 ` [dpdk-dev] [PATCH v8 14/14] build: add Arm SoC meson option Juraj Linkeš
2020-11-09 2:40 ` Honnappa Nagarahalli
2020-11-09 11:45 ` Juraj Linkeš
2020-11-09 23:53 ` Honnappa Nagarahalli
2020-11-06 8:23 ` [dpdk-dev] [PATCH v8 00/14] Arm build options rework Morten Brørup
2020-11-06 8:39 ` Juraj Linkeš
2020-11-06 8:56 ` Morten Brørup
2020-11-06 9:19 ` Bruce Richardson
2020-11-06 9:14 ` Bruce Richardson
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 " Juraj Linkeš
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 01/14] build: alias default build as generic Juraj Linkeš
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 02/14] build: rename Arm build variables Juraj Linkeš
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 03/14] build: remove unused or superfluous variables Juraj Linkeš
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 04/14] build: reformat and move Arm config and comments Juraj Linkeš
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 05/14] build: simplify how Arm flags are processed Juraj Linkeš
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 06/14] build: organize Arm config into dict Juraj Linkeš
2020-11-13 5:48 ` Honnappa Nagarahalli
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 07/14] build: isolate configuration for generic build Juraj Linkeš
2020-11-13 5:50 ` Honnappa Nagarahalli
2020-11-13 13:11 ` Thomas Monjalon
2020-11-13 14:03 ` Juraj Linkeš
2020-11-13 14:18 ` Thomas Monjalon
2020-11-13 14:22 ` Juraj Linkeš
2020-11-13 14:35 ` Thomas Monjalon
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 08/14] build: use native machine args in Arm native build Juraj Linkeš
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 09/14] build: optional NUMA and cpu counts detection Juraj Linkeš
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 10/14] build: add core and NUMA counts to cross files Juraj Linkeš
2020-11-13 5:53 ` Honnappa Nagarahalli
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 11/14] build: disable Arm drivers Juraj Linkeš
2020-11-13 5:54 ` Honnappa Nagarahalli
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 12/14] build: disable libnuma in cross builds Juraj Linkeš
2020-11-13 5:55 ` Honnappa Nagarahalli
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 13/14] build: add Arm SoC meson option Juraj Linkeš
2020-11-13 5:57 ` Honnappa Nagarahalli
2020-11-11 13:18 ` [dpdk-dev] [PATCH v9 14/14] config: fix Arm implementer and its SoCs Juraj Linkeš
2020-11-13 6:05 ` Honnappa Nagarahalli
2020-11-12 17:00 ` [dpdk-dev] [PATCH v9 00/14] Arm build options rework Jerin Jacob
2020-11-13 6:59 ` Dharmik Thakkar
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 00/15] " Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 01/15] build: alias default build as generic Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 02/15] build: rename Arm build variables Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 03/15] build: remove unused or superfluous variables Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 04/15] build: reformat and move Arm config and comments Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 05/15] build: simplify how Arm flags are processed Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 06/15] build: organize Arm config into dict Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 07/15] build: isolate configuration for generic build Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 08/15] eal/arm: fix clang build of native target Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 09/15] build: use native machine args in Arm native build Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 10/15] build: optional NUMA and cpu counts detection Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 11/15] build: add core and NUMA counts to cross files Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 12/15] build: disable Arm drivers Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 13/15] build: disable libnuma in cross builds Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 14/15] build: add Arm SoC meson option Juraj Linkeš
2020-11-13 11:09 ` [dpdk-dev] [PATCH v10 15/15] config: fix Arm implementer and its SoCs Juraj Linkeš
2020-11-13 11:37 ` [dpdk-dev] [PATCH v11 00/15] Arm build options rework Juraj Linkeš
2020-11-13 11:37 ` [dpdk-dev] [PATCH v11 01/15] crypto/armv8: replace meson option with pkg-config support Juraj Linkeš
2020-11-13 11:37 ` [dpdk-dev] [PATCH v11 02/15] build: alias default build as generic Juraj Linkeš
2020-11-13 11:37 ` [dpdk-dev] [PATCH v11 03/15] build: rename Arm build variables Juraj Linkeš
2020-11-13 11:37 ` [dpdk-dev] [PATCH v11 04/15] build: remove unused or superfluous variables Juraj Linkeš
2020-11-13 11:37 ` [dpdk-dev] [PATCH v11 05/15] build: reformat and move Arm config and comments Juraj Linkeš
2020-11-13 11:37 ` [dpdk-dev] [PATCH v11 06/15] build: simplify how Arm flags are processed Juraj Linkeš
2020-11-13 11:37 ` [dpdk-dev] [PATCH v11 07/15] build: organize Arm config into dict Juraj Linkeš
2020-11-13 11:37 ` [dpdk-dev] [PATCH v11 08/15] build: isolate configuration for generic build Juraj Linkeš
2020-11-13 11:37 ` [dpdk-dev] [PATCH v11 09/15] build: use native machine args in Arm native build Juraj Linkeš
2020-11-13 11:37 ` [dpdk-dev] [PATCH v11 10/15] build: optional NUMA and cpu counts detection Juraj Linkeš
2020-11-13 11:37 ` [dpdk-dev] [PATCH v11 11/15] build: add core and NUMA counts to cross files Juraj Linkeš
2020-11-13 11:38 ` [dpdk-dev] [PATCH v11 12/15] build: disable Arm drivers Juraj Linkeš
2020-11-13 11:38 ` [dpdk-dev] [PATCH v11 13/15] build: disable libnuma in cross builds Juraj Linkeš
2020-11-13 11:38 ` [dpdk-dev] [PATCH v11 14/15] build: add Arm SoC meson option Juraj Linkeš
2020-11-13 11:38 ` [dpdk-dev] [PATCH v11 15/15] config: fix Arm implementer and its SoCs Juraj Linkeš
2020-11-13 13:51 ` [dpdk-dev] [PATCH v11 00/15] Arm build options rework Ruifeng Wang
2020-11-13 13:57 ` Juraj Linkeš
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 00/14] " Juraj Linkeš
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 01/14] build: alias default build as generic Juraj Linkeš
2020-11-16 7:32 ` Thomas Monjalon
2020-11-16 15:50 ` Juraj Linkeš
2020-11-16 16:16 ` Bruce Richardson
2020-11-16 20:35 ` Thomas Monjalon
2020-11-17 2:46 ` Honnappa Nagarahalli
2020-11-17 7:49 ` Thomas Monjalon
2020-11-17 9:15 ` Bruce Richardson
2020-11-17 9:58 ` Thomas Monjalon
2020-11-18 14:23 ` Juraj Linkeš
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 02/14] build: rename Arm build variables Juraj Linkeš
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 03/14] build: remove unused or superfluous variables Juraj Linkeš
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 04/14] build: reformat and move Arm config and comments Juraj Linkeš
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 05/14] build: simplify how Arm flags are processed Juraj Linkeš
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 06/14] build: organize Arm config into dict Juraj Linkeš
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 07/14] build: isolate configuration for generic build Juraj Linkeš
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 08/14] build: use native machine args in Arm native build Juraj Linkeš
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 09/14] build: optional NUMA and cpu counts detection Juraj Linkeš
2020-11-14 13:16 ` Thomas Monjalon
2020-11-16 7:15 ` Juraj Linkeš
2020-11-16 7:19 ` Thomas Monjalon
2020-11-18 14:20 ` Juraj Linkeš
2020-11-18 14:32 ` Bruce Richardson
2020-11-16 7:37 ` Thomas Monjalon
2020-11-18 13:24 ` Juraj Linkeš
2020-11-16 7:24 ` Thomas Monjalon
2020-11-16 9:13 ` Bruce Richardson
2020-11-16 9:23 ` Thomas Monjalon
2020-11-18 14:19 ` Juraj Linkeš
2020-11-18 14:42 ` Thomas Monjalon
2020-11-18 14:54 ` Bruce Richardson
2020-11-18 15:04 ` Thomas Monjalon
2020-11-18 15:46 ` Bruce Richardson
2020-11-18 20:01 ` Honnappa Nagarahalli
2020-11-18 15:23 ` Juraj Linkeš
2020-11-19 12:19 ` Bruce Richardson
2020-11-19 13:57 ` Juraj Linkeš
2020-11-19 14:51 ` Bruce Richardson
2020-11-20 4:33 ` Honnappa Nagarahalli
2020-11-20 10:15 ` Bruce Richardson
2020-11-20 10:19 ` Bruce Richardson
2020-11-20 11:56 ` Juraj Linkeš
2020-11-20 12:04 ` Bruce Richardson
2020-11-20 15:56 ` Honnappa Nagarahalli
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 10/14] build: add core and NUMA counts to cross files Juraj Linkeš
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 11/14] build: disable Arm drivers Juraj Linkeš
2020-11-16 7:28 ` Thomas Monjalon
2020-11-16 7:56 ` Juraj Linkeš
2020-11-16 8:22 ` Thomas Monjalon
2020-11-16 15:54 ` Juraj Linkeš
2020-11-16 20:35 ` Thomas Monjalon
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 12/14] build: disable libnuma in cross builds Juraj Linkeš
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 13/14] build: add Arm SoC meson option Juraj Linkeš
2020-11-13 14:31 ` [dpdk-dev] [PATCH v12 14/14] config: fix Arm implementer and its SoCs Juraj Linkeš
2020-11-14 17:52 ` [dpdk-dev] [EXT] " Liron Himi
2020-11-13 14:40 ` [dpdk-dev] [PATCH v12 00/14] Arm build options rework Ruifeng Wang
2020-11-20 12:08 ` [dpdk-dev] [PATCH v13 00/12] " Juraj Linkeš
2020-11-20 12:08 ` [dpdk-dev] [PATCH v13 01/12] build: rename Arm build variables Juraj Linkeš
2020-11-20 12:08 ` [dpdk-dev] [PATCH v13 02/12] build: remove unused or superfluous variables Juraj Linkeš
2020-11-20 12:08 ` [dpdk-dev] [PATCH v13 03/12] build: reformat and move Arm config and comments Juraj Linkeš
2020-11-20 12:08 ` [dpdk-dev] [PATCH v13 04/12] build: simplify how Arm flags are processed Juraj Linkeš
2020-11-20 12:08 ` [dpdk-dev] [PATCH v13 05/12] build: organize Arm config into dict Juraj Linkeš
2020-11-20 12:08 ` [dpdk-dev] [PATCH v13 06/12] build: isolate configuration for Arm generic build Juraj Linkeš
2020-11-20 12:08 ` [dpdk-dev] [PATCH v13 07/12] build: use native machine args in Arm native build Juraj Linkeš
2020-11-20 12:08 ` [dpdk-dev] [PATCH v13 08/12] build: add core and NUMA counts to cross files Juraj Linkeš
2020-11-20 12:08 ` [dpdk-dev] [PATCH v13 09/12] build: disable drivers in Arm builds Juraj Linkeš
2020-11-20 12:08 ` [dpdk-dev] [PATCH v13 10/12] build: disable libnuma in cross builds Juraj Linkeš
2021-01-11 20:22 ` Andrew Boyer
2021-01-12 6:54 ` Juraj Linkeš
2020-11-20 12:08 ` [dpdk-dev] [PATCH v13 11/12] build: add Arm SoC meson option Juraj Linkeš
2020-11-20 12:08 ` [dpdk-dev] [PATCH v13 12/12] config: fix Arm implementer and its SoCs Juraj Linkeš
2020-12-16 23:28 ` [dpdk-dev] [PATCH v13 00/12] Arm build options rework Vimal Chungath
2020-12-23 11:47 ` [dpdk-dev] [PATCH v14 " Juraj Linkeš
2020-12-23 11:47 ` [dpdk-dev] [PATCH v14 01/12] build: rename Arm build variables Juraj Linkeš
2020-12-23 11:47 ` [dpdk-dev] [PATCH v14 02/12] build: remove unused or superfluous variables Juraj Linkeš
2020-12-23 11:47 ` [dpdk-dev] [PATCH v14 03/12] build: reformat and move Arm config and comments Juraj Linkeš
2021-01-11 20:26 ` Andrew Boyer
2021-01-12 8:12 ` Juraj Linkeš
2020-12-23 11:47 ` [dpdk-dev] [PATCH v14 04/12] build: simplify how Arm flags are processed Juraj Linkeš
2020-12-23 11:47 ` [dpdk-dev] [PATCH v14 05/12] build: organize Arm config into dict Juraj Linkeš
2021-01-15 8:38 ` Ruifeng Wang
2021-01-15 12:18 ` Juraj Linkeš
2020-12-23 11:47 ` [dpdk-dev] [PATCH v14 06/12] build: isolate configuration for Arm generic build Juraj Linkeš
2020-12-23 11:47 ` [dpdk-dev] [PATCH v14 07/12] build: use native machine args in Arm native build Juraj Linkeš
2021-01-15 8:39 ` Ruifeng Wang
2020-12-23 11:47 ` [dpdk-dev] [PATCH v14 08/12] build: add core and NUMA counts to cross files Juraj Linkeš
2020-12-23 11:47 ` [dpdk-dev] [PATCH v14 09/12] build: disable drivers in Arm builds Juraj Linkeš
2020-12-23 11:47 ` [dpdk-dev] [PATCH v14 10/12] build: disable libnuma in cross builds Juraj Linkeš
2020-12-23 11:47 ` [dpdk-dev] [PATCH v14 11/12] build: add Arm SoC meson option Juraj Linkeš
2020-12-23 11:47 ` [dpdk-dev] [PATCH v14 12/12] config: fix Arm implementer and its SoCs Juraj Linkeš
2020-12-30 19:09 ` [dpdk-dev] [PATCH v14 00/12] Arm build options rework Andrew Boyer
2020-12-30 20:56 ` Thomas Monjalon
2021-01-01 17:19 ` Honnappa Nagarahalli
2021-01-04 22:46 ` Andrew Boyer
2021-01-06 13:40 ` Bruce Richardson
2021-01-08 17:36 ` Bruce Richardson
2021-01-08 20:20 ` Honnappa Nagarahalli
2021-01-11 9:38 ` Thomas Monjalon
2021-01-11 10:01 ` Bruce Richardson
2021-01-11 16:16 ` Andrew Boyer
2021-01-11 16:59 ` Bruce Richardson
2021-01-12 8:28 ` Juraj Linkeš
2021-01-29 8:41 ` Juraj Linkeš
2021-01-29 9:45 ` Bruce Richardson
2021-01-29 10:07 ` Juraj Linkeš
2021-01-29 10:09 ` Bruce Richardson
2021-01-05 11:02 ` Pavan Nikhilesh Bhagavatula
2021-01-05 15:12 ` Honnappa Nagarahalli
2021-01-22 8:53 ` Juraj Linkeš
2021-01-27 13:40 ` Honnappa Nagarahalli
2021-01-27 15:02 ` Pavan Nikhilesh Bhagavatula
2021-01-27 15:12 ` Hemant Agrawal
2021-01-27 15:18 ` Honnappa Nagarahalli
2021-01-15 13:25 ` [dpdk-dev] [PATCH v15 " Juraj Linkeš
2021-01-15 13:25 ` [dpdk-dev] [PATCH v15 01/12] build: rename Arm build variables Juraj Linkeš
2021-01-15 13:26 ` [dpdk-dev] [PATCH v15 02/12] build: remove unused or superfluous variables Juraj Linkeš
2021-01-15 13:26 ` [dpdk-dev] [PATCH v15 03/12] build: reformat and move Arm config and comments Juraj Linkeš
2021-01-15 13:26 ` [dpdk-dev] [PATCH v15 04/12] build: simplify how Arm flags are processed Juraj Linkeš
2021-01-15 13:26 ` [dpdk-dev] [PATCH v15 05/12] build: organize Arm config into dict Juraj Linkeš
2021-01-16 14:12 ` Ruifeng Wang
2021-01-15 13:26 ` [dpdk-dev] [PATCH v15 06/12] build: isolate configuration for Arm generic build Juraj Linkeš
2021-01-15 13:26 ` [dpdk-dev] [PATCH v15 07/12] build: use native machine args in Arm native build Juraj Linkeš
2021-01-15 13:26 ` [dpdk-dev] [PATCH v15 08/12] build: add core and NUMA counts to cross files Juraj Linkeš
2021-01-15 13:26 ` [dpdk-dev] [PATCH v15 09/12] build: disable drivers in Arm builds Juraj Linkeš
2021-01-18 13:37 ` Thomas Monjalon
2021-01-19 15:35 ` Juraj Linkeš
2021-01-19 15:55 ` Liron Himi
2021-01-20 1:11 ` Honnappa Nagarahalli
2021-01-22 8:39 ` Juraj Linkeš
2021-01-22 8:58 ` Thomas Monjalon
2021-01-22 9:07 ` Jerin Jacob
2021-01-22 10:19 ` Thomas Monjalon
2021-01-25 14:58 ` Honnappa Nagarahalli
2021-01-25 15:28 ` Thomas Monjalon
2021-01-25 16:09 ` Jerin Jacob
2021-01-15 13:26 ` [dpdk-dev] [PATCH v15 10/12] build: disable libnuma in cross builds Juraj Linkeš
2021-01-15 13:26 ` [dpdk-dev] [PATCH v15 11/12] build: add Arm SoC meson option Juraj Linkeš
2021-01-18 13:41 ` Thomas Monjalon
2021-01-19 14:56 ` Juraj Linkeš
2021-01-19 15:52 ` Thomas Monjalon
2021-01-19 16:04 ` Bruce Richardson
2021-01-20 1:04 ` Honnappa Nagarahalli
2021-01-20 1:08 ` Thomas Monjalon
2021-01-20 2:20 ` Honnappa Nagarahalli
2021-01-20 8:41 ` Juraj Linkeš
2021-01-20 16:10 ` Thomas Monjalon
2021-01-21 15:02 ` Juraj Linkeš
2021-01-21 15:52 ` Thomas Monjalon
2021-01-21 16:12 ` Bruce Richardson
2021-01-21 17:31 ` Thomas Monjalon
2021-01-15 13:26 ` [dpdk-dev] [PATCH v15 12/12] config: fix Arm implementer and its SoCs Juraj Linkeš
2021-01-18 13:45 ` Thomas Monjalon
2021-01-18 14:02 ` [dpdk-dev] [EXT] " Liron Himi
2021-01-18 15:03 ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
[not found] ` <DM6PR12MB3753721F869FE4530C0739EADFA40@DM6PR12MB3753.namprd12.prod.outlook.com>
2021-01-19 8:38 ` [dpdk-dev] " Slava Ovsiienko
2021-01-18 21:31 ` [dpdk-dev] [PATCH v15 00/12] Arm build options rework Thomas Monjalon
2021-01-19 15:10 ` Juraj Linkeš
2021-01-19 15:53 ` Thomas Monjalon
2021-02-03 14:03 ` [dpdk-dev] [PATCH v16 0/3] " Juraj Linkeš
2021-02-03 14:03 ` [dpdk-dev] [PATCH v16 1/3] build: disable/enable drivers in Arm builds Juraj Linkeš
2021-02-19 10:38 ` Juraj Linkeš
2021-03-09 8:58 ` Juraj Linkeš
2021-03-09 10:56 ` Bruce Richardson
2021-03-09 11:49 ` Juraj Linkeš
2021-03-09 12:57 ` Jerin Jacob
2021-03-09 15:08 ` Honnappa Nagarahalli
2021-03-09 15:49 ` Juraj Linkeš
2021-03-09 16:04 ` Honnappa Nagarahalli
2021-03-09 18:09 ` Juraj Linkeš
2021-03-09 19:54 ` Honnappa Nagarahalli
2021-03-10 7:42 ` Juraj Linkeš
2021-03-10 9:12 ` Jerin Jacob
2021-03-10 19:36 ` Honnappa Nagarahalli
2021-03-11 17:14 ` Jerin Jacob
2021-03-19 13:21 ` Juraj Linkeš
2021-03-19 13:32 ` Jerin Jacob
2021-03-30 0:39 ` Honnappa Nagarahalli
2021-03-31 8:39 ` Juraj Linkeš
2021-03-31 9:07 ` Bruce Richardson
2021-03-31 9:14 ` Juraj Linkeš
2021-03-09 15:10 ` Honnappa Nagarahalli
2021-03-31 10:26 ` [dpdk-dev] [PATCH v17 0/3] Arm build options rework Juraj Linkeš
2021-03-31 10:26 ` [dpdk-dev] [PATCH v17 1/3] build: disable/enable drivers in Arm builds Juraj Linkeš
2021-04-09 8:17 ` Ruifeng Wang
2021-03-31 10:26 ` [dpdk-dev] [PATCH v17 2/3] build: add 'platform' meson option and Arm SoC config Juraj Linkeš
2021-04-09 8:19 ` Ruifeng Wang
2021-03-31 10:26 ` [dpdk-dev] [PATCH v17 3/3] config: fix Arm implementer and its SoCs Juraj Linkeš
2021-04-09 6:35 ` [dpdk-dev] [PATCH v18 0/3] Arm build options rework Juraj Linkeš
2021-04-09 6:35 ` [dpdk-dev] [PATCH v18 1/3] build: disable/enable drivers in Arm builds Juraj Linkeš
2021-04-09 8:21 ` Ruifeng Wang
2021-04-09 6:35 ` [dpdk-dev] [PATCH v18 2/3] build: add 'platform' meson option and Arm SoC config Juraj Linkeš
2021-04-09 8:06 ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2021-04-09 8:22 ` [dpdk-dev] " Ruifeng Wang
2021-04-09 6:35 ` [dpdk-dev] [PATCH v18 3/3] config: fix Arm implementer and its SoCs Juraj Linkeš
2021-04-09 8:26 ` Ruifeng Wang
2021-04-09 8:31 ` Juraj Linkeš
2021-04-09 8:41 ` [dpdk-dev] [PATCH v19 0/3] Arm build options rework Juraj Linkeš
2021-04-09 8:41 ` [dpdk-dev] [PATCH v19 1/3] build: disable/enable drivers in Arm builds Juraj Linkeš
2021-04-09 10:02 ` Bruce Richardson
2021-04-09 14:10 ` Juraj Linkeš
2021-04-09 14:31 ` Bruce Richardson
2021-04-09 15:38 ` Bruce Richardson
2021-04-14 9:09 ` Juraj Linkeš
2021-04-14 9:02 ` Juraj Linkeš
2021-04-14 9:48 ` Bruce Richardson
2021-04-09 8:41 ` [dpdk-dev] [PATCH v19 2/3] build: add 'platform' meson option and Arm SoC config Juraj Linkeš
2021-04-09 8:41 ` [dpdk-dev] [PATCH v19 3/3] config: fix Arm implementer and its SoCs Juraj Linkeš
2021-04-09 8:44 ` Ruifeng Wang
2021-04-09 8:54 ` [dpdk-dev] [PATCH v19 0/3] Arm build options rework Jerin Jacob
2021-04-12 3:57 ` Chengchang Tang
2021-04-12 14:10 ` Honnappa Nagarahalli
2021-04-12 14:58 ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2021-04-14 12:58 ` [dpdk-dev] [PATCH v20 " Juraj Linkeš
2021-04-14 12:58 ` [dpdk-dev] [PATCH v20 1/3] build: disable/enable drivers in Arm builds Juraj Linkeš
2021-04-14 13:27 ` Bruce Richardson
2021-04-14 13:33 ` Juraj Linkeš
2021-04-14 12:58 ` [dpdk-dev] [PATCH v20 2/3] build: add 'platform' meson option and Arm SoC config Juraj Linkeš
2021-04-14 12:58 ` [dpdk-dev] [PATCH v20 3/3] config: fix Arm implementer and its SoCs Juraj Linkeš
2021-04-14 13:41 ` [dpdk-dev] [PATCH v21 0/3] Arm build options rework Juraj Linkeš
2021-04-14 13:41 ` [dpdk-dev] [PATCH v21 1/3] build: disable/enable drivers in Arm builds Juraj Linkeš
2021-04-14 13:41 ` [dpdk-dev] [PATCH v21 2/3] build: add 'platform' meson option and Arm SoC config Juraj Linkeš
2021-04-14 13:41 ` [dpdk-dev] [PATCH v21 3/3] config: fix Arm implementer and its SoCs Juraj Linkeš
2021-04-15 20:25 ` [dpdk-dev] [PATCH v21 0/3] Arm build options rework Thomas Monjalon
2021-02-03 14:03 ` [dpdk-dev] [PATCH v16 2/3] build: add 'platform' meson option and Arm SoC config Juraj Linkeš
2021-02-03 14:03 ` [dpdk-dev] [PATCH v16 3/3] config: fix Arm implementer and its SoCs Juraj Linkeš
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DBAPR08MB581444BDD703651592EDF1F798390@DBAPR08MB5814.eurprd08.prod.outlook.com \
--to=honnappa.nagarahalli@arm.com \
--cc=Dharmik.Thakkar@arm.com \
--cc=Phil.Yang@arm.com \
--cc=Ruifeng.Wang@arm.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=jerinjacobk@gmail.com \
--cc=juraj.linkes@pantheon.tech \
--cc=nd@arm.com \
--cc=vcchunga@amazon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).