DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Loftus, Ciara" <ciara.loftus@intel.com>
To: Shivaji Kant <shivajikant@google.com>,
	Thomas Monjalon <thomas@monjalon.net>,
	"Tahhan, Maryam" <mtahhan@redhat.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, Joshua Washington <joshwash@google.com>
Subject: RE: [PATCH] net/af_xdp: add rx/tx queue support for af_xdp
Date: Thu, 19 Jun 2025 08:39:58 +0000	[thread overview]
Message-ID: <DM3PPF7D18F34A123EE7323CC7FE84DBA6C8E7DA@DM3PPF7D18F34A1.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20250618174103.1345466-1-shivajikant@google.com>

> Subject: [PATCH] net/af_xdp: add rx/tx queue support for af_xdp
> 
> Driver like GVE do support rx/tx queue configuration
> rather than combined queue. Enable AF_XDP vdev to use
> rx/tx queue configuration instead of combined queue
> configuration if available.
> 
> Signed-off-by: Shivaji Kant <shivajikant@google.com>
> Reviewed-by: Joshua Washington <joshwash@google.com>

Thanks for the patch. LGTM.
Acked-by: Ciara Loftus <ciara.loftus@intel.com>

> ---
>  .mailmap                            |  1 +
>  drivers/net/af_xdp/rte_eth_af_xdp.c | 30 ++++++++++++++++++-----------
>  2 files changed, 20 insertions(+), 11 deletions(-)
> 
> diff --git a/.mailmap b/.mailmap
> index 8483d96ec5..c67caa7c9d 100644
> --- a/.mailmap
> +++ b/.mailmap
> @@ -1423,6 +1423,7 @@ Shijith Thotton <sthotton@marvell.com>
> <shijith.thotton@caviumnetworks.com>
>  Shiqi Liu <835703180@qq.com>
>  Shiri Kuzin <shirik@nvidia.com> <shirik@mellanox.com>
>  Shivah Shankar S <sshankarnara@marvell.com>
> +Shivaji Kant <shivajikant@google.com>
>  Shivanshu Shukla <shivanshu.shukla@intel.com>
>  Shiweixian <shiweixian@huawei.com>
>  Shiyang He <shiyangx.he@intel.com>
> diff --git a/drivers/net/af_xdp/rte_eth_af_xdp.c
> b/drivers/net/af_xdp/rte_eth_af_xdp.c
> index 05115150a7..6899b6b165 100644
> --- a/drivers/net/af_xdp/rte_eth_af_xdp.c
> +++ b/drivers/net/af_xdp/rte_eth_af_xdp.c
> @@ -168,7 +168,7 @@ struct pmd_internals {
>  	int start_queue_idx;
>  	int queue_cnt;
>  	int max_queue_cnt;
> -	int combined_queue_cnt;
> +	int configured_queue_cnt;
>  	bool shared_umem;
>  	char prog_path[PATH_MAX];
>  	bool custom_prog_configured;
> @@ -2043,11 +2043,11 @@ parse_prog_arg(const char *key __rte_unused,
> 
>  static int
>  xdp_get_channels_info(const char *if_name, int *max_queues,
> -				int *combined_queues)
> +				int *configured_queues)
>  {
>  	struct ethtool_channels channels;
>  	struct ifreq ifr;
> -	int fd, ret;
> +	int fd, ret, rxtx_q_count;
> 
>  	fd = socket(AF_INET, SOCK_DGRAM, 0);
>  	if (fd < 0)
> @@ -2066,15 +2066,23 @@ xdp_get_channels_info(const char *if_name, int
> *max_queues,
>  		}
>  	}
> 
> -	if (channels.max_combined == 0 || errno == EOPNOTSUPP) {
> +	/* For dirvers with rx/tx queue configured */
> +	rxtx_q_count = RTE_MIN(channels.rx_count, channels.tx_count);
> +
> +	if ((channels.max_combined == 0 && rxtx_q_count == 0) || errno ==
> EOPNOTSUPP) {
>  		/* If the device says it has no channels, then all traffic
>  		 * is sent to a single stream, so max queues = 1.
>  		 */
>  		*max_queues = 1;
> -		*combined_queues = 1;
> -	} else {
> +		*configured_queues = 1;
> +	} else if (channels.max_combined > 0) {
>  		*max_queues = channels.max_combined;
> -		*combined_queues = channels.combined_count;
> +		*configured_queues = channels.combined_count;
> +		AF_XDP_LOG_LINE(INFO, "Using Combined queues
> configuration");
> +	} else {
> +		*max_queues = RTE_MIN(channels.max_rx, channels.max_tx);
> +		*configured_queues = rxtx_q_count;
> +		AF_XDP_LOG_LINE(INFO, "Using Rx/Tx queues
> configuration");
>  	}
> 
>   out:
> @@ -2215,15 +2223,15 @@ init_internals(struct rte_vdev_device *dev, const
> char *if_name,
>  	strlcpy(internals->dp_path, dp_path, PATH_MAX);
> 
>  	if (xdp_get_channels_info(if_name, &internals->max_queue_cnt,
> -				  &internals->combined_queue_cnt)) {
> +				  &internals->configured_queue_cnt)) {
>  		AF_XDP_LOG_LINE(ERR, "Failed to get channel info of
> interface: %s",
>  				if_name);
>  		goto err_free_internals;
>  	}
> 
> -	if (queue_cnt > internals->combined_queue_cnt) {
> -		AF_XDP_LOG_LINE(ERR, "Specified queue count %d is larger
> than combined queue count %d.",
> -				queue_cnt, internals->combined_queue_cnt);
> +	if (queue_cnt > internals->configured_queue_cnt) {
> +		AF_XDP_LOG_LINE(ERR, "Specified queue count %d is larger
> than configured queue count %d.",
> +				queue_cnt, internals-
> >configured_queue_cnt);
>  		goto err_free_internals;
>  	}
> 
> --
> 2.50.0.rc2.701.gf1e915cc24-goog


      reply	other threads:[~2025-06-19  8:40 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-18 17:41 Shivaji Kant
2025-06-19  8:39 ` Loftus, Ciara [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DM3PPF7D18F34A123EE7323CC7FE84DBA6C8E7DA@DM3PPF7D18F34A1.namprd11.prod.outlook.com \
    --to=ciara.loftus@intel.com \
    --cc=dev@dpdk.org \
    --cc=joshwash@google.com \
    --cc=mtahhan@redhat.com \
    --cc=shivajikant@google.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).