[dpdk-dev] [PATCH 0/2] MLX5 PMD tuning

[dpdk-dev] [PATCH 0/2] MLX5 PMD tuning

[Ruifeng Wang]

This series include optimizations for MLX5 PMD.
In tests on Arm N1SDP with MLX5 40G NIC, changes
showed performance gain.

Ruifeng Wang (2):
  net/mlx5: remove redundant operations
  net/mlx5: reduce unnecessary memory access

 drivers/net/mlx5/mlx5_rxtx_vec.c      | 6 ++++--
 drivers/net/mlx5/mlx5_rxtx_vec_neon.h | 9 +--------
 2 files changed, 5 insertions(+), 10 deletions(-)

-- 
2.25.1

[dpdk-dev] [PATCH 1/2] net/mlx5: remove redundant operations

[Ruifeng Wang]

Some operations on mask are redundant and can be removed.
The change yielded 1.6% performance gain on N1SDP.
On ThunderX2, slight performance uplift was also observed.

Fixes: 570acdb1da8a ("net/mlx5: add vectorized Rx/Tx burst for ARM")
Cc: stable@dpdk.org

Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
---
 drivers/net/mlx5/mlx5_rxtx_vec_neon.h | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
index 2234fbe6b2..98a75b09c6 100644
--- a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
+++ b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
@@ -768,18 +768,11 @@ rxq_cq_process_v(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cq,
 					  comp_mask), 0)) /
 					  (sizeof(uint16_t) * 8);
 		/* D.6 mask out entries after the compressed CQE. */
-		mask = vcreate_u16(comp_idx < MLX5_VPMD_DESCS_PER_LOOP ?
-				   -1UL >> (comp_idx * sizeof(uint16_t) * 8) :
-				   0);
-		invalid_mask = vorr_u16(invalid_mask, mask);
+		invalid_mask = vorr_u16(invalid_mask, comp_mask);
 		/* D.7 count non-compressed valid CQEs. */
 		n = __builtin_clzl(vget_lane_u64(vreinterpret_u64_u16(
 				   invalid_mask), 0)) / (sizeof(uint16_t) * 8);
 		nocmp_n += n;
-		/* D.2 get the final invalid mask. */
-		mask = vcreate_u16(n < MLX5_VPMD_DESCS_PER_LOOP ?
-				   -1UL >> (n * sizeof(uint16_t) * 8) : 0);
-		invalid_mask = vorr_u16(invalid_mask, mask);
 		/* D.3 check error in opcode. */
 		opcode = vceq_u16(resp_err_check, opcode);
 		opcode = vbic_u16(opcode, invalid_mask);
-- 
2.25.1

[dpdk-dev] [PATCH 2/2] net/mlx5: reduce unnecessary memory access

[Ruifeng Wang]

MR btree len is a constant during Rx replenish.
Moved retrieve of the value out of loop to reduce data loads.
Slight performance uplift was measured on N1SDP.

Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
---
 drivers/net/mlx5/mlx5_rxtx_vec.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_rxtx_vec.c b/drivers/net/mlx5/mlx5_rxtx_vec.c
index d5af2d91ff..fc7e2a7f41 100644
--- a/drivers/net/mlx5/mlx5_rxtx_vec.c
+++ b/drivers/net/mlx5/mlx5_rxtx_vec.c
@@ -95,6 +95,7 @@ mlx5_rx_replenish_bulk_mbuf(struct mlx5_rxq_data *rxq)
 	volatile struct mlx5_wqe_data_seg *wq =
 		&((volatile struct mlx5_wqe_data_seg *)rxq->wqes)[elts_idx];
 	unsigned int i;
+	uint16_t btree_len;
 
 	if (n >= rxq->rq_repl_thresh) {
 		MLX5_ASSERT(n >= MLX5_VPMD_RXQ_RPLNSH_THRESH(q_n));
@@ -106,6 +107,8 @@ mlx5_rx_replenish_bulk_mbuf(struct mlx5_rxq_data *rxq)
 			rxq->stats.rx_nombuf += n;
 			return;
 		}
+
+		btree_len = mlx5_mr_btree_len(&rxq->mr_ctrl.cache_bh);
 		for (i = 0; i < n; ++i) {
 			void *buf_addr;
 
@@ -119,8 +122,7 @@ mlx5_rx_replenish_bulk_mbuf(struct mlx5_rxq_data *rxq)
 			wq[i].addr = rte_cpu_to_be_64((uintptr_t)buf_addr +
 						      RTE_PKTMBUF_HEADROOM);
 			/* If there's a single MR, no need to replace LKey. */
-			if (unlikely(mlx5_mr_btree_len(&rxq->mr_ctrl.cache_bh)
-				     > 1))
+			if (unlikely(btree_len > 1))
 				wq[i].lkey = mlx5_rx_mb2mr(rxq, elts[i]);
 		}
 		rxq->rq_ci += n;
-- 
2.25.1

Re: [dpdk-dev] [PATCH 0/2] MLX5 PMD tuning

[Ruifeng Wang]

> -----Original Message-----
> From: Ruifeng Wang <ruifeng.wang@arm.com>
> Sent: Tuesday, June 1, 2021 4:31 PM
> To: rasland@nvidia.com; matan@nvidia.com; shahafs@nvidia.com;
> viacheslavo@nvidia.com
> Cc: dev@dpdk.org; jerinj@marvell.com; nd <nd@arm.com>; Honnappa
> Nagarahalli <Honnappa.Nagarahalli@arm.com>; Ruifeng Wang
> <Ruifeng.Wang@arm.com>
> Subject: [PATCH 0/2] MLX5 PMD tuning
> 
> This series include optimizations for MLX5 PMD.
> In tests on Arm N1SDP with MLX5 40G NIC, changes showed performance
> gain.
> 
> Ruifeng Wang (2):
>   net/mlx5: remove redundant operations
>   net/mlx5: reduce unnecessary memory access
> 
>  drivers/net/mlx5/mlx5_rxtx_vec.c      | 6 ++++--
>  drivers/net/mlx5/mlx5_rxtx_vec_neon.h | 9 +--------
>  2 files changed, 5 insertions(+), 10 deletions(-)
> 
> --
> 2.25.1

Ping.
Appreciate your review of these patches.

Thanks.

Re: [dpdk-dev] [PATCH 2/2] net/mlx5: reduce unnecessary memory access

[Slava Ovsiienko]

Hi, Ruifeng

Could we go further and implement loop inside the conditional?
Like this:
if (mlx5_mr_btree_len(&rxq->mr_ctrl.cache_bh) > 1) {
	for (i = 0; i < n; ++i) {
		void *buf_addr = elts[i]->buf_addr;

		wq[i].addr = rte_cpu_to_be_64((uintptr_t)buf_addr +
					      RTE_PKTMBUF_HEADROOM);
		wq[i].lkey = mlx5_rx_mb2mr(rxq, elts[i]);
	}
} else {
	for (i = 0; i < n; ++i) {
		void *buf_addr = elts[i]->buf_addr;

		wq[i].addr = rte_cpu_to_be_64((uintptr_t)buf_addr +
					      RTE_PKTMBUF_HEADROOM);
	}
}
What do you think?
Also,  we should check the performance on other archs is not affected.

With best regards,
Slava

> -----Original Message-----
> From: Ruifeng Wang <ruifeng.wang@arm.com>
> Sent: Tuesday, June 1, 2021 11:31
> To: Raslan Darawsheh <rasland@nvidia.com>; Matan Azrad
> <matan@nvidia.com>; Shahaf Shuler <shahafs@nvidia.com>; Slava Ovsiienko
> <viacheslavo@nvidia.com>
> Cc: dev@dpdk.org; jerinj@marvell.com; nd@arm.com;
> honnappa.nagarahalli@arm.com; Ruifeng Wang <ruifeng.wang@arm.com>
> Subject: [PATCH 2/2] net/mlx5: reduce unnecessary memory access
> 
> MR btree len is a constant during Rx replenish.
> Moved retrieve of the value out of loop to reduce data loads.
> Slight performance uplift was measured on N1SDP.
> 
> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
> ---
>  drivers/net/mlx5/mlx5_rxtx_vec.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_rxtx_vec.c
> b/drivers/net/mlx5/mlx5_rxtx_vec.c
> index d5af2d91ff..fc7e2a7f41 100644
> --- a/drivers/net/mlx5/mlx5_rxtx_vec.c
> +++ b/drivers/net/mlx5/mlx5_rxtx_vec.c
> @@ -95,6 +95,7 @@ mlx5_rx_replenish_bulk_mbuf(struct mlx5_rxq_data
> *rxq)
>  	volatile struct mlx5_wqe_data_seg *wq =
>  		&((volatile struct mlx5_wqe_data_seg *)rxq->wqes)[elts_idx];
>  	unsigned int i;
> +	uint16_t btree_len;
> 
>  	if (n >= rxq->rq_repl_thresh) {
>  		MLX5_ASSERT(n >=
> MLX5_VPMD_RXQ_RPLNSH_THRESH(q_n));
> @@ -106,6 +107,8 @@ mlx5_rx_replenish_bulk_mbuf(struct mlx5_rxq_data
> *rxq)
>  			rxq->stats.rx_nombuf += n;
>  			return;
>  		}
> +
> +		btree_len = mlx5_mr_btree_len(&rxq->mr_ctrl.cache_bh);
>  		for (i = 0; i < n; ++i) {
>  			void *buf_addr;
> 
> @@ -119,8 +122,7 @@ mlx5_rx_replenish_bulk_mbuf(struct mlx5_rxq_data
> *rxq)
>  			wq[i].addr = rte_cpu_to_be_64((uintptr_t)buf_addr +
> 
> RTE_PKTMBUF_HEADROOM);
>  			/* If there's a single MR, no need to replace LKey. */
> -			if (unlikely(mlx5_mr_btree_len(&rxq-
> >mr_ctrl.cache_bh)
> -				     > 1))
> +			if (unlikely(btree_len > 1))
>  				wq[i].lkey = mlx5_rx_mb2mr(rxq, elts[i]);
>  		}
>  		rxq->rq_ci += n;
> --
> 2.25.1

Re: [dpdk-dev] [PATCH 2/2] net/mlx5: reduce unnecessary memory access

[Ruifeng Wang]

> -----Original Message-----
> From: Slava Ovsiienko <viacheslavo@nvidia.com>
> Sent: Friday, July 2, 2021 3:06 PM
> To: Ruifeng Wang <Ruifeng.Wang@arm.com>; Raslan Darawsheh
> <rasland@nvidia.com>; Matan Azrad <matan@nvidia.com>; Shahaf Shuler
> <shahafs@nvidia.com>
> Cc: dev@dpdk.org; jerinj@marvell.com; nd <nd@arm.com>; Honnappa
> Nagarahalli <Honnappa.Nagarahalli@arm.com>
> Subject: RE: [PATCH 2/2] net/mlx5: reduce unnecessary memory access
> 
> Hi, Ruifeng
> 
> Could we go further and implement loop inside the conditional?
> Like this:
> if (mlx5_mr_btree_len(&rxq->mr_ctrl.cache_bh) > 1) {
> 	for (i = 0; i < n; ++i) {
> 		void *buf_addr = elts[i]->buf_addr;
> 
> 		wq[i].addr = rte_cpu_to_be_64((uintptr_t)buf_addr +
> 					      RTE_PKTMBUF_HEADROOM);
> 		wq[i].lkey = mlx5_rx_mb2mr(rxq, elts[i]);
> 	}
> } else {
> 	for (i = 0; i < n; ++i) {
> 		void *buf_addr = elts[i]->buf_addr;
> 
> 		wq[i].addr = rte_cpu_to_be_64((uintptr_t)buf_addr +
> 					      RTE_PKTMBUF_HEADROOM);
> 	}
> }
> What do you think?
Agree. Loop inside the conditional should be more efficient.

> Also,  we should check the performance on other archs is not affected.
I will also test on x86 platform that I have.

> 
> With best regards,
> Slava
> 
> > -----Original Message-----
> > From: Ruifeng Wang <ruifeng.wang@arm.com>
> > Sent: Tuesday, June 1, 2021 11:31
> > To: Raslan Darawsheh <rasland@nvidia.com>; Matan Azrad
> > <matan@nvidia.com>; Shahaf Shuler <shahafs@nvidia.com>; Slava
> > Ovsiienko <viacheslavo@nvidia.com>
> > Cc: dev@dpdk.org; jerinj@marvell.com; nd@arm.com;
> > honnappa.nagarahalli@arm.com; Ruifeng Wang <ruifeng.wang@arm.com>
> > Subject: [PATCH 2/2] net/mlx5: reduce unnecessary memory access
> >
> > MR btree len is a constant during Rx replenish.
> > Moved retrieve of the value out of loop to reduce data loads.
> > Slight performance uplift was measured on N1SDP.
> >
> > Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
> > ---
> >  drivers/net/mlx5/mlx5_rxtx_vec.c | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/net/mlx5/mlx5_rxtx_vec.c
> > b/drivers/net/mlx5/mlx5_rxtx_vec.c
> > index d5af2d91ff..fc7e2a7f41 100644
> > --- a/drivers/net/mlx5/mlx5_rxtx_vec.c
> > +++ b/drivers/net/mlx5/mlx5_rxtx_vec.c
> > @@ -95,6 +95,7 @@ mlx5_rx_replenish_bulk_mbuf(struct mlx5_rxq_data
> > *rxq)
> >  	volatile struct mlx5_wqe_data_seg *wq =
> >  		&((volatile struct mlx5_wqe_data_seg *)rxq-
> >wqes)[elts_idx];
> >  	unsigned int i;
> > +	uint16_t btree_len;
> >
> >  	if (n >= rxq->rq_repl_thresh) {
> >  		MLX5_ASSERT(n >=
> > MLX5_VPMD_RXQ_RPLNSH_THRESH(q_n));
> > @@ -106,6 +107,8 @@ mlx5_rx_replenish_bulk_mbuf(struct
> mlx5_rxq_data
> > *rxq)
> >  			rxq->stats.rx_nombuf += n;
> >  			return;
> >  		}
> > +
> > +		btree_len = mlx5_mr_btree_len(&rxq->mr_ctrl.cache_bh);
> >  		for (i = 0; i < n; ++i) {
> >  			void *buf_addr;
> >
> > @@ -119,8 +122,7 @@ mlx5_rx_replenish_bulk_mbuf(struct
> mlx5_rxq_data
> > *rxq)
> >  			wq[i].addr = rte_cpu_to_be_64((uintptr_t)buf_addr
> +
> >
> > RTE_PKTMBUF_HEADROOM);
> >  			/* If there's a single MR, no need to replace LKey. */
> > -			if (unlikely(mlx5_mr_btree_len(&rxq-
> > >mr_ctrl.cache_bh)
> > -				     > 1))
> > +			if (unlikely(btree_len > 1))
> >  				wq[i].lkey = mlx5_rx_mb2mr(rxq, elts[i]);
> >  		}
> >  		rxq->rq_ci += n;
> > --
> > 2.25.1

Re: [dpdk-dev] [PATCH 1/2] net/mlx5: remove redundant operations

[Slava Ovsiienko]

Hi, Ruifeng

> -----Original Message-----
> From: Ruifeng Wang <ruifeng.wang@arm.com>
> Sent: Tuesday, June 1, 2021 11:31
> To: Raslan Darawsheh <rasland@nvidia.com>; Matan Azrad
> <matan@nvidia.com>; Shahaf Shuler <shahafs@nvidia.com>; Slava Ovsiienko
> <viacheslavo@nvidia.com>
> Cc: dev@dpdk.org; jerinj@marvell.com; nd@arm.com;
> honnappa.nagarahalli@arm.com; Ruifeng Wang <ruifeng.wang@arm.com>;
> stable@dpdk.org
> Subject: [PATCH 1/2] net/mlx5: remove redundant operations
> 
> Some operations on mask are redundant and can be removed.
> The change yielded 1.6% performance gain on N1SDP.
> On ThunderX2, slight performance uplift was also observed.
> 
> Fixes: 570acdb1da8a ("net/mlx5: add vectorized Rx/Tx burst for ARM")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
> ---
>  drivers/net/mlx5/mlx5_rxtx_vec_neon.h | 9 +--------
>  1 file changed, 1 insertion(+), 8 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> index 2234fbe6b2..98a75b09c6 100644
> --- a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> +++ b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> @@ -768,18 +768,11 @@ rxq_cq_process_v(struct mlx5_rxq_data *rxq,
> volatile struct mlx5_cqe *cq,
>  					  comp_mask), 0)) /
>  					  (sizeof(uint16_t) * 8);
>  		/* D.6 mask out entries after the compressed CQE. */
> -		mask = vcreate_u16(comp_idx <
> MLX5_VPMD_DESCS_PER_LOOP ?
> -				   -1UL >> (comp_idx * sizeof(uint16_t) * 8) :
> -				   0);
> -		invalid_mask = vorr_u16(invalid_mask, mask);
> +		invalid_mask = vorr_u16(invalid_mask, comp_mask);

Mmmm... I'm not sure we can drop the masking compressed (and following) CQE skip.
Let's consider the completion scenario (the series of 4 CQEs, each element is 64B long)

0: normal uncompressed CQE, ownership OK, format uncompressed, opcode OK, no error
1: compressed CQE, ownership OK, format compressed, opcode OK, no error
2: miniCQE array, format can be any!!, may be discovered as ownership OK, format uncompressed, opcode OK, no error
3: miniCQE array, format can be any!!, may be discovered as ownership OK, format uncompressed, opcode OK, no error

Obviously, we should unconditionally mask out 2 and 3, regardless of recognized their formats/opcode/error/etc.
I think we can get the diff above and skip diff below:

>  		/* D.7 count non-compressed valid CQEs. */
>  		n = __builtin_clzl(vget_lane_u64(vreinterpret_u64_u16(
>  				   invalid_mask), 0)) / (sizeof(uint16_t) * 8);
>  		nocmp_n += n;
> -		/* D.2 get the final invalid mask. */
> -		mask = vcreate_u16(n < MLX5_VPMD_DESCS_PER_LOOP ?
> -				   -1UL >> (n * sizeof(uint16_t) * 8) : 0);
> -		invalid_mask = vorr_u16(invalid_mask, mask);

and get the correct final invalid_mask - all compressed and invalid CQEs and following ones will be masked out.

With best regards,
Slava

Re: [dpdk-dev] [PATCH 1/2] net/mlx5: remove redundant operations

[Ruifeng Wang]

> -----Original Message-----
> From: Slava Ovsiienko <viacheslavo@nvidia.com>
> Sent: Friday, July 2, 2021 4:13 PM
> To: Ruifeng Wang <Ruifeng.Wang@arm.com>; Raslan Darawsheh
> <rasland@nvidia.com>; Matan Azrad <matan@nvidia.com>; Shahaf Shuler
> <shahafs@nvidia.com>
> Cc: dev@dpdk.org; jerinj@marvell.com; nd <nd@arm.com>; Honnappa
> Nagarahalli <Honnappa.Nagarahalli@arm.com>; stable@dpdk.org
> Subject: RE: [PATCH 1/2] net/mlx5: remove redundant operations
> 
> Hi, Ruifeng
Hi, Slava

> 
> > -----Original Message-----
> > From: Ruifeng Wang <ruifeng.wang@arm.com>
> > Sent: Tuesday, June 1, 2021 11:31
> > To: Raslan Darawsheh <rasland@nvidia.com>; Matan Azrad
> > <matan@nvidia.com>; Shahaf Shuler <shahafs@nvidia.com>; Slava
> > Ovsiienko <viacheslavo@nvidia.com>
> > Cc: dev@dpdk.org; jerinj@marvell.com; nd@arm.com;
> > honnappa.nagarahalli@arm.com; Ruifeng Wang <ruifeng.wang@arm.com>;
> > stable@dpdk.org
> > Subject: [PATCH 1/2] net/mlx5: remove redundant operations
> >
> > Some operations on mask are redundant and can be removed.
> > The change yielded 1.6% performance gain on N1SDP.
> > On ThunderX2, slight performance uplift was also observed.
> >
> > Fixes: 570acdb1da8a ("net/mlx5: add vectorized Rx/Tx burst for ARM")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
> > ---
> >  drivers/net/mlx5/mlx5_rxtx_vec_neon.h | 9 +--------
> >  1 file changed, 1 insertion(+), 8 deletions(-)
> >
> > diff --git a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> > b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> > index 2234fbe6b2..98a75b09c6 100644
> > --- a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> > +++ b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> > @@ -768,18 +768,11 @@ rxq_cq_process_v(struct mlx5_rxq_data *rxq,
> > volatile struct mlx5_cqe *cq,
> >  					  comp_mask), 0)) /
> >  					  (sizeof(uint16_t) * 8);
> >  		/* D.6 mask out entries after the compressed CQE. */
> > -		mask = vcreate_u16(comp_idx <
> > MLX5_VPMD_DESCS_PER_LOOP ?
> > -				   -1UL >> (comp_idx * sizeof(uint16_t) * 8) :
> > -				   0);
> > -		invalid_mask = vorr_u16(invalid_mask, mask);
> > +		invalid_mask = vorr_u16(invalid_mask, comp_mask);
> 
> Mmmm... I'm not sure we can drop the masking compressed (and following)
> CQE skip.
> Let's consider the completion scenario (the series of 4 CQEs, each element is
> 64B long)
> 
> 0: normal uncompressed CQE, ownership OK, format uncompressed, opcode
> OK, no error
> 1: compressed CQE, ownership OK, format compressed, opcode OK, no error
> 2: miniCQE array, format can be any!!, may be discovered as ownership OK,
> format uncompressed, opcode OK, no error
> 3: miniCQE array, format can be any!!, may be discovered as ownership OK,
> format uncompressed, opcode OK, no error

Thanks for your review and explanation about CQE processing details.
I did the change based on the fact that some calculations doesn't change the data. 
So some intermediate calculations were removed.

In the above diff section, result of 'mask' always equals to the nearest 'comp_mask' that above it.
So I just remoed 'mask' and use 'comp_mask' instead.
> 
> Obviously, we should unconditionally mask out 2 and 3, regardless of
> recognized their formats/opcode/error/etc.
> I think we can get the diff above and skip diff below:
> 
> >  		/* D.7 count non-compressed valid CQEs. */
> >  		n = __builtin_clzl(vget_lane_u64(vreinterpret_u64_u16(
> >  				   invalid_mask), 0)) / (sizeof(uint16_t) * 8);
> >  		nocmp_n += n;
> > -		/* D.2 get the final invalid mask. */
> > -		mask = vcreate_u16(n < MLX5_VPMD_DESCS_PER_LOOP ?
> > -				   -1UL >> (n * sizeof(uint16_t) * 8) : 0);
> > -		invalid_mask = vorr_u16(invalid_mask, mask);
> 
> and get the correct final invalid_mask - all compressed and invalid CQEs and
> following ones will be masked out.

This diff section is similar to the previous one.
'mask' always equals to the nearest 'invalid_mask' that above it.
So entire line "invalid_mask = vorr_u16(invalid_mask, mask);" can be removed.

Code logic is not changed. But I'm not sure the code change impacts readability
or maintainability that you may concern.

Thanks.
> 
> With best regards,
> Slava

Re: [dpdk-dev] [PATCH 1/2] net/mlx5: remove redundant operations

[Slava Ovsiienko]

Hi, Ruifeng

The invalid_mask is used to set error flags and calculate the statistics.
So, all the CQEs the first one with error or invalid status should be masked out
(and the CQEs after that).

IMO, what we could improve (apply just the part of the patch below):
>>>>
index 2234fbe6b2..98a75b09c6 100644
--- a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
+++ b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
@@ -768,18 +768,11 @@  rxq_cq_process_v(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cq,
 					  comp_mask), 0)) /
 					  (sizeof(uint16_t) * 8);
 		/* D.6 mask out entries after the compressed CQE. */
-		mask = vcreate_u16(comp_idx < MLX5_VPMD_DESCS_PER_LOOP ?
-				   -1UL >> (comp_idx * sizeof(uint16_t) * 8) :
-				   0);
-		invalid_mask = vorr_u16(invalid_mask, mask);
+		invalid_mask = vorr_u16(invalid_mask, comp_mask);
 		/* D.7 count non-compressed valid CQEs. */
 		n = __builtin_clzl(vget_lane_u64(vreinterpret_u64_u16(
 				   invalid_mask), 0)) / (sizeof(uint16_t) * 8);
 		nocmp_n += n;
<<<<

And that's it. The rest of the patch:
>>>>
-		/* D.2 get the final invalid mask. */
-		mask = vcreate_u16(n < MLX5_VPMD_DESCS_PER_LOOP ?
-				   -1UL >> (n * sizeof(uint16_t) * 8) : 0);
-		invalid_mask = vorr_u16(invalid_mask, mask);
<<<<
Should not be applied, otherwise the following might be affected:

opcode = vbic_u16(opcode, invalid_mask);
...
opcode = vbic_u16(opcode, invalid_mask);

With best regards,
Slava

> -----Original Message-----
> From: Ruifeng Wang <Ruifeng.Wang@arm.com>
> Sent: Friday, July 2, 2021 13:30
> To: Slava Ovsiienko <viacheslavo@nvidia.com>; Raslan Darawsheh
> <rasland@nvidia.com>; Matan Azrad <matan@nvidia.com>; Shahaf Shuler
> <shahafs@nvidia.com>
> Cc: dev@dpdk.org; jerinj@marvell.com; nd <nd@arm.com>; Honnappa
> Nagarahalli <Honnappa.Nagarahalli@arm.com>; stable@dpdk.org; nd
> <nd@arm.com>
> Subject: RE: [PATCH 1/2] net/mlx5: remove redundant operations
> 
> > -----Original Message-----
> > From: Slava Ovsiienko <viacheslavo@nvidia.com>
> > Sent: Friday, July 2, 2021 4:13 PM
> > To: Ruifeng Wang <Ruifeng.Wang@arm.com>; Raslan Darawsheh
> > <rasland@nvidia.com>; Matan Azrad <matan@nvidia.com>; Shahaf Shuler
> > <shahafs@nvidia.com>
> > Cc: dev@dpdk.org; jerinj@marvell.com; nd <nd@arm.com>; Honnappa
> > Nagarahalli <Honnappa.Nagarahalli@arm.com>; stable@dpdk.org
> > Subject: RE: [PATCH 1/2] net/mlx5: remove redundant operations
> >
> > Hi, Ruifeng
> Hi, Slava
> 
> >
> > > -----Original Message-----
> > > From: Ruifeng Wang <ruifeng.wang@arm.com>
> > > Sent: Tuesday, June 1, 2021 11:31
> > > To: Raslan Darawsheh <rasland@nvidia.com>; Matan Azrad
> > > <matan@nvidia.com>; Shahaf Shuler <shahafs@nvidia.com>; Slava
> > > Ovsiienko <viacheslavo@nvidia.com>
> > > Cc: dev@dpdk.org; jerinj@marvell.com; nd@arm.com;
> > > honnappa.nagarahalli@arm.com; Ruifeng Wang
> <ruifeng.wang@arm.com>;
> > > stable@dpdk.org
> > > Subject: [PATCH 1/2] net/mlx5: remove redundant operations
> > >
> > > Some operations on mask are redundant and can be removed.
> > > The change yielded 1.6% performance gain on N1SDP.
> > > On ThunderX2, slight performance uplift was also observed.
> > >
> > > Fixes: 570acdb1da8a ("net/mlx5: add vectorized Rx/Tx burst for ARM")
> > > Cc: stable@dpdk.org
> > >
> > > Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
> > > ---
> > >  drivers/net/mlx5/mlx5_rxtx_vec_neon.h | 9 +--------
> > >  1 file changed, 1 insertion(+), 8 deletions(-)
> > >
> > > diff --git a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> > > b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> > > index 2234fbe6b2..98a75b09c6 100644
> > > --- a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> > > +++ b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> > > @@ -768,18 +768,11 @@ rxq_cq_process_v(struct mlx5_rxq_data *rxq,
> > > volatile struct mlx5_cqe *cq,
> > >  					  comp_mask), 0)) /
> > >  					  (sizeof(uint16_t) * 8);
> > >  		/* D.6 mask out entries after the compressed CQE. */
> > > -		mask = vcreate_u16(comp_idx <
> > > MLX5_VPMD_DESCS_PER_LOOP ?
> > > -				   -1UL >> (comp_idx * sizeof(uint16_t) * 8) :
> > > -				   0);
> > > -		invalid_mask = vorr_u16(invalid_mask, mask);
> > > +		invalid_mask = vorr_u16(invalid_mask, comp_mask);
> >
> > Mmmm... I'm not sure we can drop the masking compressed (and
> > following) CQE skip.
> > Let's consider the completion scenario (the series of 4 CQEs, each
> > element is 64B long)
> >
> > 0: normal uncompressed CQE, ownership OK, format uncompressed, opcode
> > OK, no error
> > 1: compressed CQE, ownership OK, format compressed, opcode OK, no
> > error
> > 2: miniCQE array, format can be any!!, may be discovered as ownership
> > OK, format uncompressed, opcode OK, no error
> > 3: miniCQE array, format can be any!!, may be discovered as ownership
> > OK, format uncompressed, opcode OK, no error
> 
> Thanks for your review and explanation about CQE processing details.
> I did the change based on the fact that some calculations doesn't change the
> data.
> So some intermediate calculations were removed.
> 
> In the above diff section, result of 'mask' always equals to the nearest
> 'comp_mask' that above it.
> So I just remoed 'mask' and use 'comp_mask' instead.
> >
> > Obviously, we should unconditionally mask out 2 and 3, regardless of
> > recognized their formats/opcode/error/etc.
> > I think we can get the diff above and skip diff below:
> >
> > >  		/* D.7 count non-compressed valid CQEs. */
> > >  		n = __builtin_clzl(vget_lane_u64(vreinterpret_u64_u16(
> > >  				   invalid_mask), 0)) / (sizeof(uint16_t) * 8);
> > >  		nocmp_n += n;
> > > -		/* D.2 get the final invalid mask. */
> > > -		mask = vcreate_u16(n < MLX5_VPMD_DESCS_PER_LOOP ?
> > > -				   -1UL >> (n * sizeof(uint16_t) * 8) : 0);
> > > -		invalid_mask = vorr_u16(invalid_mask, mask);
> >
> > and get the correct final invalid_mask - all compressed and invalid
> > CQEs and following ones will be masked out.
> 
> This diff section is similar to the previous one.
> 'mask' always equals to the nearest 'invalid_mask' that above it.
> So entire line "invalid_mask = vorr_u16(invalid_mask, mask);" can be removed.
> 
> Code logic is not changed. But I'm not sure the code change impacts readability
> or maintainability that you may concern.
> 
> Thanks.
> >
> > With best regards,
> > Slava

Re: [dpdk-dev] [PATCH 1/2] net/mlx5: remove redundant operations

[Ruifeng Wang]

> -----Original Message-----
> From: Slava Ovsiienko <viacheslavo@nvidia.com>
> Sent: Monday, July 5, 2021 6:02 PM
> To: Ruifeng Wang <Ruifeng.Wang@arm.com>; Raslan Darawsheh
> <rasland@nvidia.com>; Matan Azrad <matan@nvidia.com>; Shahaf Shuler
> <shahafs@nvidia.com>
> Cc: dev@dpdk.org; jerinj@marvell.com; nd <nd@arm.com>; Honnappa
> Nagarahalli <Honnappa.Nagarahalli@arm.com>; stable@dpdk.org; nd
> <nd@arm.com>
> Subject: RE: [PATCH 1/2] net/mlx5: remove redundant operations
> 
> Hi, Ruifeng
> 
> The invalid_mask is used to set error flags and calculate the statistics.
> So, all the CQEs the first one with error or invalid status should be masked
> out (and the CQEs after that).
Now I understand it. What I was missing is inconsecutive mask bits.
Thanks for your patience.
I'll update in next version.

> 
> IMO, what we could improve (apply just the part of the patch below):
> >>>>
> index 2234fbe6b2..98a75b09c6 100644
> --- a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> +++ b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> @@ -768,18 +768,11 @@  rxq_cq_process_v(struct mlx5_rxq_data *rxq,
> volatile struct mlx5_cqe *cq,
>  					  comp_mask), 0)) /
>  					  (sizeof(uint16_t) * 8);
>  		/* D.6 mask out entries after the compressed CQE. */
> -		mask = vcreate_u16(comp_idx <
> MLX5_VPMD_DESCS_PER_LOOP ?
> -				   -1UL >> (comp_idx * sizeof(uint16_t) * 8) :
> -				   0);
> -		invalid_mask = vorr_u16(invalid_mask, mask);
> +		invalid_mask = vorr_u16(invalid_mask, comp_mask);
>  		/* D.7 count non-compressed valid CQEs. */
>  		n = __builtin_clzl(vget_lane_u64(vreinterpret_u64_u16(
>  				   invalid_mask), 0)) / (sizeof(uint16_t) * 8);
>  		nocmp_n += n;
> <<<<
> 
> And that's it. The rest of the patch:
> >>>>
> -		/* D.2 get the final invalid mask. */
> -		mask = vcreate_u16(n < MLX5_VPMD_DESCS_PER_LOOP ?
> -				   -1UL >> (n * sizeof(uint16_t) * 8) : 0);
> -		invalid_mask = vorr_u16(invalid_mask, mask);
> <<<<
> Should not be applied, otherwise the following might be affected:
> 
> opcode = vbic_u16(opcode, invalid_mask); ...
> opcode = vbic_u16(opcode, invalid_mask);
> 
> With best regards,
> Slava
> 
> > -----Original Message-----
> > From: Ruifeng Wang <Ruifeng.Wang@arm.com>
> > Sent: Friday, July 2, 2021 13:30
> > To: Slava Ovsiienko <viacheslavo@nvidia.com>; Raslan Darawsheh
> > <rasland@nvidia.com>; Matan Azrad <matan@nvidia.com>; Shahaf Shuler
> > <shahafs@nvidia.com>
> > Cc: dev@dpdk.org; jerinj@marvell.com; nd <nd@arm.com>; Honnappa
> > Nagarahalli <Honnappa.Nagarahalli@arm.com>; stable@dpdk.org; nd
> > <nd@arm.com>
> > Subject: RE: [PATCH 1/2] net/mlx5: remove redundant operations
> >
> > > -----Original Message-----
> > > From: Slava Ovsiienko <viacheslavo@nvidia.com>
> > > Sent: Friday, July 2, 2021 4:13 PM
> > > To: Ruifeng Wang <Ruifeng.Wang@arm.com>; Raslan Darawsheh
> > > <rasland@nvidia.com>; Matan Azrad <matan@nvidia.com>; Shahaf
> Shuler
> > > <shahafs@nvidia.com>
> > > Cc: dev@dpdk.org; jerinj@marvell.com; nd <nd@arm.com>; Honnappa
> > > Nagarahalli <Honnappa.Nagarahalli@arm.com>; stable@dpdk.org
> > > Subject: RE: [PATCH 1/2] net/mlx5: remove redundant operations
> > >
> > > Hi, Ruifeng
> > Hi, Slava
> >
> > >
> > > > -----Original Message-----
> > > > From: Ruifeng Wang <ruifeng.wang@arm.com>
> > > > Sent: Tuesday, June 1, 2021 11:31
> > > > To: Raslan Darawsheh <rasland@nvidia.com>; Matan Azrad
> > > > <matan@nvidia.com>; Shahaf Shuler <shahafs@nvidia.com>; Slava
> > > > Ovsiienko <viacheslavo@nvidia.com>
> > > > Cc: dev@dpdk.org; jerinj@marvell.com; nd@arm.com;
> > > > honnappa.nagarahalli@arm.com; Ruifeng Wang
> > <ruifeng.wang@arm.com>;
> > > > stable@dpdk.org
> > > > Subject: [PATCH 1/2] net/mlx5: remove redundant operations
> > > >
> > > > Some operations on mask are redundant and can be removed.
> > > > The change yielded 1.6% performance gain on N1SDP.
> > > > On ThunderX2, slight performance uplift was also observed.
> > > >
> > > > Fixes: 570acdb1da8a ("net/mlx5: add vectorized Rx/Tx burst for
> > > > ARM")
> > > > Cc: stable@dpdk.org
> > > >
> > > > Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
> > > > ---
> > > >  drivers/net/mlx5/mlx5_rxtx_vec_neon.h | 9 +--------
> > > >  1 file changed, 1 insertion(+), 8 deletions(-)
> > > >
> > > > diff --git a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> > > > b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> > > > index 2234fbe6b2..98a75b09c6 100644
> > > > --- a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> > > > +++ b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
> > > > @@ -768,18 +768,11 @@ rxq_cq_process_v(struct mlx5_rxq_data *rxq,
> > > > volatile struct mlx5_cqe *cq,
> > > >  					  comp_mask), 0)) /
> > > >  					  (sizeof(uint16_t) * 8);
> > > >  		/* D.6 mask out entries after the compressed CQE. */
> > > > -		mask = vcreate_u16(comp_idx <
> > > > MLX5_VPMD_DESCS_PER_LOOP ?
> > > > -				   -1UL >> (comp_idx * sizeof(uint16_t) * 8) :
> > > > -				   0);
> > > > -		invalid_mask = vorr_u16(invalid_mask, mask);
> > > > +		invalid_mask = vorr_u16(invalid_mask, comp_mask);
> > >
> > > Mmmm... I'm not sure we can drop the masking compressed (and
> > > following) CQE skip.
> > > Let's consider the completion scenario (the series of 4 CQEs, each
> > > element is 64B long)
> > >
> > > 0: normal uncompressed CQE, ownership OK, format uncompressed,
> > > opcode OK, no error
> > > 1: compressed CQE, ownership OK, format compressed, opcode OK, no
> > > error
> > > 2: miniCQE array, format can be any!!, may be discovered as
> > > ownership OK, format uncompressed, opcode OK, no error
> > > 3: miniCQE array, format can be any!!, may be discovered as
> > > ownership OK, format uncompressed, opcode OK, no error
> >
> > Thanks for your review and explanation about CQE processing details.
> > I did the change based on the fact that some calculations doesn't
> > change the data.
> > So some intermediate calculations were removed.
> >
> > In the above diff section, result of 'mask' always equals to the
> > nearest 'comp_mask' that above it.
> > So I just remoed 'mask' and use 'comp_mask' instead.
> > >
> > > Obviously, we should unconditionally mask out 2 and 3, regardless of
> > > recognized their formats/opcode/error/etc.
> > > I think we can get the diff above and skip diff below:
> > >
> > > >  		/* D.7 count non-compressed valid CQEs. */
> > > >  		n = __builtin_clzl(vget_lane_u64(vreinterpret_u64_u16(
> > > >  				   invalid_mask), 0)) / (sizeof(uint16_t) * 8);
> > > >  		nocmp_n += n;
> > > > -		/* D.2 get the final invalid mask. */
> > > > -		mask = vcreate_u16(n < MLX5_VPMD_DESCS_PER_LOOP ?
> > > > -				   -1UL >> (n * sizeof(uint16_t) * 8) : 0);
> > > > -		invalid_mask = vorr_u16(invalid_mask, mask);
> > >
> > > and get the correct final invalid_mask - all compressed and invalid
> > > CQEs and following ones will be masked out.
> >
> > This diff section is similar to the previous one.
> > 'mask' always equals to the nearest 'invalid_mask' that above it.
> > So entire line "invalid_mask = vorr_u16(invalid_mask, mask);" can be
> removed.
> >
> > Code logic is not changed. But I'm not sure the code change impacts
> > readability or maintainability that you may concern.
> >
> > Thanks.
> > >
> > > With best regards,
> > > Slava

[dpdk-dev] [PATCH v2 0/2] MLX5 PMD tuning

[Ruifeng Wang]

This series include optimizations for MLX5 PMD.
In tests on Arm N1SDP with MLX5 40G NIC, changes
showed performance gain.

Ruifeng Wang (2):
  net/mlx5: remove redundant operations
  net/mlx5: reduce unnecessary memory access

 drivers/net/mlx5/mlx5_rxtx_vec.c      | 35 +++++++++++++++------------
 drivers/net/mlx5/mlx5_rxtx_vec_neon.h | 11 ++++-----
 2 files changed, 25 insertions(+), 21 deletions(-)

-- 
2.25.1

[dpdk-dev] [PATCH v2 1/2] net/mlx5: remove redundant operations

[Ruifeng Wang]

Mask of entries after the compressed CQE is covered by invalid mask of
non-compressed valid CQEs. Hence remove redundant calculation on mask.
The change showed slight performance uplift on N1SDP.

Fixes: 570acdb1da8a ("net/mlx5: add vectorized Rx/Tx burst for ARM")
Cc: stable@dpdk.org

Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
---
 drivers/net/mlx5/mlx5_rxtx_vec_neon.h | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
index 2234fbe6b2..ce50a3ccc4 100644
--- a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
+++ b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
@@ -767,16 +767,15 @@ rxq_cq_process_v(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cq,
 		comp_idx = __builtin_clzl(vget_lane_u64(vreinterpret_u64_u16(
 					  comp_mask), 0)) /
 					  (sizeof(uint16_t) * 8);
-		/* D.6 mask out entries after the compressed CQE. */
-		mask = vcreate_u16(comp_idx < MLX5_VPMD_DESCS_PER_LOOP ?
-				   -1UL >> (comp_idx * sizeof(uint16_t) * 8) :
-				   0);
-		invalid_mask = vorr_u16(invalid_mask, mask);
+		invalid_mask = vorr_u16(invalid_mask, comp_mask);
 		/* D.7 count non-compressed valid CQEs. */
 		n = __builtin_clzl(vget_lane_u64(vreinterpret_u64_u16(
 				   invalid_mask), 0)) / (sizeof(uint16_t) * 8);
 		nocmp_n += n;
-		/* D.2 get the final invalid mask. */
+		/*
+		 * D.2 mask out entries after the compressed CQE.
+		 *     get the final invalid mask.
+		 */
 		mask = vcreate_u16(n < MLX5_VPMD_DESCS_PER_LOOP ?
 				   -1UL >> (n * sizeof(uint16_t) * 8) : 0);
 		invalid_mask = vorr_u16(invalid_mask, mask);
-- 
2.25.1

[dpdk-dev] [PATCH v2 2/2] net/mlx5: reduce unnecessary memory access

[Ruifeng Wang]

MR btree len is a constant during Rx replenish.
Moved retrieve of the value out of loop to reduce data loads.
Slight performance uplift was measured on both N1SDP and x86.

Suggested-by: Slava Ovsiienko <viacheslavo@nvidia.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
---
 drivers/net/mlx5/mlx5_rxtx_vec.c | 35 ++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 15 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_rxtx_vec.c b/drivers/net/mlx5/mlx5_rxtx_vec.c
index d5af2d91ff..e64ef70181 100644
--- a/drivers/net/mlx5/mlx5_rxtx_vec.c
+++ b/drivers/net/mlx5/mlx5_rxtx_vec.c
@@ -106,22 +106,27 @@ mlx5_rx_replenish_bulk_mbuf(struct mlx5_rxq_data *rxq)
 			rxq->stats.rx_nombuf += n;
 			return;
 		}
-		for (i = 0; i < n; ++i) {
-			void *buf_addr;
-
-			/*
-			 * In order to support the mbufs with external attached
-			 * data buffer we should use the buf_addr pointer
-			 * instead of rte_mbuf_buf_addr(). It touches the mbuf
-			 * itself and may impact the performance.
-			 */
-			buf_addr = elts[i]->buf_addr;
-			wq[i].addr = rte_cpu_to_be_64((uintptr_t)buf_addr +
-						      RTE_PKTMBUF_HEADROOM);
-			/* If there's a single MR, no need to replace LKey. */
-			if (unlikely(mlx5_mr_btree_len(&rxq->mr_ctrl.cache_bh)
-				     > 1))
+		if (unlikely(mlx5_mr_btree_len(&rxq->mr_ctrl.cache_bh) > 1)) {
+			for (i = 0; i < n; ++i) {
+				/*
+				 * In order to support the mbufs with external attached
+				 * data buffer we should use the buf_addr pointer
+				 * instead of rte_mbuf_buf_addr(). It touches the mbuf
+				 * itself and may impact the performance.
+				 */
+				void *buf_addr = elts[i]->buf_addr;
+
+				wq[i].addr = rte_cpu_to_be_64((uintptr_t)buf_addr +
+							      RTE_PKTMBUF_HEADROOM);
 				wq[i].lkey = mlx5_rx_mb2mr(rxq, elts[i]);
+			}
+		} else {
+			for (i = 0; i < n; ++i) {
+				void *buf_addr = elts[i]->buf_addr;
+
+				wq[i].addr = rte_cpu_to_be_64((uintptr_t)buf_addr +
+							      RTE_PKTMBUF_HEADROOM);
+			}
 		}
 		rxq->rq_ci += n;
 		/* Prevent overflowing into consumed mbufs. */
-- 
2.25.1

Re: [dpdk-dev] [PATCH v2 1/2] net/mlx5: remove redundant operations

[Slava Ovsiienko]

> -----Original Message-----
> From: Ruifeng Wang <ruifeng.wang@arm.com>
> Sent: Wednesday, July 7, 2021 12:03
> To: Raslan Darawsheh <rasland@nvidia.com>; Matan Azrad
> <matan@nvidia.com>; Shahaf Shuler <shahafs@nvidia.com>; Slava
> Ovsiienko <viacheslavo@nvidia.com>
> Cc: dev@dpdk.org; jerinj@marvell.com; nd@arm.com;
> honnappa.nagarahalli@arm.com; Ruifeng Wang <ruifeng.wang@arm.com>;
> stable@dpdk.org
> Subject: [PATCH v2 1/2] net/mlx5: remove redundant operations
> 
> Mask of entries after the compressed CQE is covered by invalid mask of non-
> compressed valid CQEs. Hence remove redundant calculation on mask.
> The change showed slight performance uplift on N1SDP.
> 
> Fixes: 570acdb1da8a ("net/mlx5: add vectorized Rx/Tx burst for ARM")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Thank you for the patch update,
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

Re: [dpdk-dev] [PATCH v2 2/2] net/mlx5: reduce unnecessary memory access

[Slava Ovsiienko]

> -----Original Message-----
> From: Ruifeng Wang <ruifeng.wang@arm.com>
> Sent: Wednesday, July 7, 2021 12:03
> To: Raslan Darawsheh <rasland@nvidia.com>; Matan Azrad
> <matan@nvidia.com>; Shahaf Shuler <shahafs@nvidia.com>; Slava
> Ovsiienko <viacheslavo@nvidia.com>
> Cc: dev@dpdk.org; jerinj@marvell.com; nd@arm.com;
> honnappa.nagarahalli@arm.com; Ruifeng Wang <ruifeng.wang@arm.com>
> Subject: [PATCH v2 2/2] net/mlx5: reduce unnecessary memory access
> 
> MR btree len is a constant during Rx replenish.
> Moved retrieve of the value out of loop to reduce data loads.
> Slight performance uplift was measured on both N1SDP and x86.
> 
> Suggested-by: Slava Ovsiienko <viacheslavo@nvidia.com>
> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Thank you for the update,
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

Re: [dpdk-dev] [PATCH v2 0/2] MLX5 PMD tuning

[Raslan Darawsheh]

Hi,

> -----Original Message-----
> From: Ruifeng Wang <ruifeng.wang@arm.com>
> Sent: Wednesday, July 7, 2021 12:03 PM
> To: Raslan Darawsheh <rasland@nvidia.com>; Matan Azrad
> <matan@nvidia.com>; Shahaf Shuler <shahafs@nvidia.com>; Slava
> Ovsiienko <viacheslavo@nvidia.com>
> Cc: dev@dpdk.org; jerinj@marvell.com; nd@arm.com;
> honnappa.nagarahalli@arm.com; Ruifeng Wang <ruifeng.wang@arm.com>
> Subject: [PATCH v2 0/2] MLX5 PMD tuning
> 
> This series include optimizations for MLX5 PMD.
> In tests on Arm N1SDP with MLX5 40G NIC, changes showed performance
> gain.
> 
> Ruifeng Wang (2):
>   net/mlx5: remove redundant operations
>   net/mlx5: reduce unnecessary memory access
> 
>  drivers/net/mlx5/mlx5_rxtx_vec.c      | 35 +++++++++++++++------------
>  drivers/net/mlx5/mlx5_rxtx_vec_neon.h | 11 ++++-----
>  2 files changed, 25 insertions(+), 21 deletions(-)
> 
> --
> 2.25.1

Series applied to next-net-mlx,

Kindest regards,
Raslan Darawsheh