DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Dumitrescu, Cristian" <cristian.dumitrescu@intel.com>
To: Li Zhang <lizh@nvidia.com>,
	"dekelp@nvidia.com" <dekelp@nvidia.com>,
	"orika@nvidia.com" <orika@nvidia.com>,
	"viacheslavo@nvidia.com" <viacheslavo@nvidia.com>,
	"matan@nvidia.com" <matan@nvidia.com>,
	"shahafs@nvidia.com" <shahafs@nvidia.com>,
	Thomas Monjalon <thomas@monjalon.net>,
	"Yigit, Ferruh" <ferruh.yigit@intel.com>,
	"Andrew Rybchenko" <andrew.rybchenko@oktetlabs.ru>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
	"rasland@nvidia.com" <rasland@nvidia.com>,
	 "roniba@nvidia.com" <roniba@nvidia.com>
Subject: Re: [dpdk-dev] [PATCH 1/2] ethdev: add packet mode in meter profile structure
Date: Wed, 31 Mar 2021 16:26:41 +0000
Message-ID: <DM6PR11MB2796336D67827B588445D982EB7C9@DM6PR11MB2796.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20210331085405.1445546-2-lizh@nvidia.com>

Hi Li,

> -----Original Message-----
> From: Li Zhang <lizh@nvidia.com>
> Sent: Wednesday, March 31, 2021 9:54 AM
> To: dekelp@nvidia.com; orika@nvidia.com; viacheslavo@nvidia.com;
> matan@nvidia.com; shahafs@nvidia.com; Dumitrescu, Cristian
> <cristian.dumitrescu@intel.com>; Thomas Monjalon
> <thomas@monjalon.net>; Yigit, Ferruh <ferruh.yigit@intel.com>; Andrew
> Rybchenko <andrew.rybchenko@oktetlabs.ru>
> Cc: dev@dpdk.org; rasland@nvidia.com; roniba@nvidia.com
> Subject: [PATCH 1/2] ethdev: add packet mode in meter profile structure
> 
> Currently meter algorithms only supports rate is bytes per second(BPS).
> Add packet_mode flag in meter profile parameters data structure.
> So that it can meter traffic by packet per second.
> 
> When packet_mode is 0, the profile rates and bucket sizes are
> specified in bytes per second and bytes
> when packet_mode is not 0, the profile rates and bucket sizes are
> specified in packets and packets per second.
> 
> The below structure will be extended:
> rte_mtr_meter_profile
> rte_mtr_capabilities
> 
> Signed-off-by: Li Zhang <lizh@nvidia.com>
> ---
>  doc/guides/rel_notes/release_21_05.rst |  7 ++
>  lib/librte_ethdev/rte_mtr.h            | 89 ++++++++++++++++++++++----
>  2 files changed, 85 insertions(+), 11 deletions(-)
> 
> diff --git a/doc/guides/rel_notes/release_21_05.rst
> b/doc/guides/rel_notes/release_21_05.rst
> index 3c76148b11..c9c15794ad 100644
> --- a/doc/guides/rel_notes/release_21_05.rst
> +++ b/doc/guides/rel_notes/release_21_05.rst
> @@ -119,6 +119,13 @@ New Features
>    * Added command to display Rx queue used descriptor count.
>      ``show port (port_id) rxq (queue_id) desc used count``
> 
> +* **Added support for meter PPS profile.**
> +
> +  Currently meter algorithms only supports bytes per second(BPS).
> +  Add packet_mode in the meter profile parameters data structures
> +  to support packet per second (PPS) mode.
> +  So that it can meter traffic by packet per second.
> +  Packet_mode must be 0 when it is bytes mode.
> 
>  Removed Items
>  -------------
> diff --git a/lib/librte_ethdev/rte_mtr.h b/lib/librte_ethdev/rte_mtr.h
> index e1dc59eb06..52611a90f5 100644
> --- a/lib/librte_ethdev/rte_mtr.h
> +++ b/lib/librte_ethdev/rte_mtr.h
> @@ -133,46 +133,71 @@ struct rte_mtr_meter_profile {
>  	union {
>  		/** Items only valid when *alg* is set to srTCM - RFC 2697. */
>  		struct {
> -			/** Committed Information Rate (CIR)
> (bytes/second). */
> +			/**
> +			 * Committed Information Rate (CIR)
> +			 * (bytes per second or packets per second).
> +			 */
>  			uint64_t cir;
> 
> -			/** Committed Burst Size (CBS) (bytes). */
> +			/** Committed Burst Size (CBS) (bytes or packets). */
>  			uint64_t cbs;
> 
> -			/** Excess Burst Size (EBS) (bytes). */
> +			/** Excess Burst Size (EBS) (bytes or packets). */
>  			uint64_t ebs;
>  		} srtcm_rfc2697;
> 
>  		/** Items only valid when *alg* is set to trTCM - RFC 2698. */
>  		struct {
> -			/** Committed Information Rate (CIR)
> (bytes/second). */
> +			/**
> +			 * Committed Information Rate (CIR)
> +			 * (bytes per second or packets per second).
> +			 */
>  			uint64_t cir;
> 
> -			/** Peak Information Rate (PIR) (bytes/second). */
> +			/**
> +			 * Peak Information Rate (PIR)
> +			 * (bytes per second or packets per second).
> +			 */
>  			uint64_t pir;
> 
> -			/** Committed Burst Size (CBS) (byes). */
> +			/** Committed Burst Size (CBS) (bytes or packets). */
>  			uint64_t cbs;
> 
> -			/** Peak Burst Size (PBS) (bytes). */
> +			/** Peak Burst Size (PBS) (bytes or packets). */
>  			uint64_t pbs;
>  		} trtcm_rfc2698;
> 
>  		/** Items only valid when *alg* is set to trTCM - RFC 4115. */
>  		struct {
> -			/** Committed Information Rate (CIR)
> (bytes/second). */
> +			/**
> +			 * Committed Information Rate (CIR)
> +			 * (bytes per second or packets per second).
> +			 */
>  			uint64_t cir;
> 
> -			/** Excess Information Rate (EIR) (bytes/second). */
> +			/**
> +			 * Excess Information Rate (EIR)
> +			 * (bytes per second or packets per second).
> +			 */
>  			uint64_t eir;
> 
> -			/** Committed Burst Size (CBS) (byes). */
> +			/** Committed Burst Size (CBS) (bytes or packets). */
>  			uint64_t cbs;
> 
> -			/** Excess Burst Size (EBS) (bytes). */
> +			/** Excess Burst Size (EBS) (bytes or packets). */
>  			uint64_t ebs;
>  		} trtcm_rfc4115;
>  	};
> +
> +	/**
> +	 * When zero, the byte mode is enabled for the current profile, so
> the
> +	 * *rate* and *size* fields are specified in bytes per second
> +	 * and bytes, respectively.
> +	 * When non-zero, the packet mode is enabled for the current
> profile,
> +	 * so the *rate* and *size* fields are specified in packets per second
> +	 * and packets, respectively.
> +	 */
> +	int packet_mode;
>  };
> 
>  /**
> @@ -333,6 +358,48 @@ struct rte_mtr_capabilities {
>  	 */
>  	int color_aware_trtcm_rfc4115_supported;
> 
> +	/**
> +	 * srTCM rfc2697 byte mode supported.
> +	 * When non-zero, it indicates that byte mode is supported for
> +	 * the srTCM RFC 2697 metering algorithm.
> +	 */
> +	int srtcm_rfc2697_byte_mode_supported;
> +
> +	/**
> +	 * srTCM rfc2697 packet mode supported.
> +	 * When non-zero, it indicates that packet mode is supported for
> +	 * the srTCM RFC 2697 metering algorithm.
> +	 */
> +	int srtcm_rfc2697_packet_mode_supported;
> +
> +	/**
> +	 * trTCM rfc2698 byte mode supported.
> +	 * When non-zero, it indicates that byte mode is supported for
> +	 * the trTCM RFC 2698 metering algorithm.
> +	 */
> +	int trtcm_rfc2698_byte_mode_supported;
> +
> +	/**
> +	 * trTCM rfc2698 packet mode supported.
> +	 * When non-zero, it indicates that packet mode is supported for
> +	 * the trTCM RFC 2698 metering algorithm.
> +	 */
> +	int trtcm_rfc2698_packet_mode_supported;
> +
> +	/**
> +	 * trTCM rfc4115 byte mode supported.
> +	 * When non-zero, it indicates that byte mode is supported for
> +	 * the trTCM RFC 4115 metering algorithm.
> +	 */
> +	int trtcm_rfc4115_byte_mode_supported;
> +
> +	/**
> +	 * trTCM rfc4115 packet mode supported.
> +	 * When non-zero, it indicates that packet mode is supported for
> +	 * the trTCM RFC 4115 metering algorithm.
> +	 */
> +	int trtcm_rfc4115_packet_mode_supported;
> +
>  	/** Set of supported statistics counter types.
>  	 * @see enum rte_mtr_stats_type
>  	 */
> --
> 2.27.0

These API updates look good to me, but please add the necessary checks to the existing drivers implementing the rte_mtr API to makes sure that profiles with packet_mode set to TRUE are rejected.

For the Soft NIC driver, this is a simple check in file drivers/net/softnic/rte_eth_softnic_meter.c, function meter_profile_check. Thanks!

Regards,
Cristian

  reply	other threads:[~2021-03-31 16:28 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-31  8:54 [dpdk-dev] [PATCH 0/2] Support PPS(packet per second) on meter Li Zhang
2021-03-31  8:54 ` [dpdk-dev] [PATCH 1/2] ethdev: add packet mode in meter profile structure Li Zhang
2021-03-31 16:26   ` Dumitrescu, Cristian [this message]
2021-04-01  1:41     ` Li Zhang
2021-04-01  6:19       ` Li Zhang
2021-04-07 20:20         ` Dumitrescu, Cristian
2021-04-08  4:06           ` Li Zhang
2021-03-31  8:54 ` [dpdk-dev] [PATCH 2/2] app/testpmd: add meter profile packet mode option Li Zhang
2021-04-07 20:17   ` Dumitrescu, Cristian
2021-04-08  2:34     ` Li Zhang
2021-04-07 20:21   ` Dumitrescu, Cristian
2021-04-08  3:58 ` [dpdk-dev] [PATCH v2 0/4] Support PPS(packet per second) on meter Li Zhang
2021-04-08  3:58   ` [dpdk-dev] [PATCH v2 1/4] ethdev: add packet mode in meter profile structure Li Zhang
2021-04-08  3:58   ` [dpdk-dev] [PATCH v2 2/4] app/testpmd: add meter profile packet mode option Li Zhang
2021-04-08  3:58   ` [dpdk-dev] [PATCH v2 3/4] net/softnic: check meter packet mode Li Zhang
2021-04-08  3:58   ` [dpdk-dev] [PATCH v2 4/4] net/mvpp2: " Li Zhang
2021-04-10  7:24   ` [dpdk-dev] [PATCH v3 0/4] Support PPS(packet per second) on meter Li Zhang
2021-04-10  7:24     ` [dpdk-dev] [PATCH v3 1/4] ethdev: add packet mode in meter profile structure Li Zhang
2021-04-12 19:23       ` Dumitrescu, Cristian
2021-04-12 19:28         ` Jerin Jacob
2021-04-13  3:48           ` Ajit Khaparde
2021-04-10  7:24     ` [dpdk-dev] [PATCH v3 2/4] app/testpmd: add meter profile packet mode option Li Zhang
2021-04-12 23:51       ` Ferruh Yigit
2021-04-13  2:57         ` Li Zhang
2021-04-10  7:24     ` [dpdk-dev] [PATCH v3 3/4] net/softnic: check meter packet mode Li Zhang
2021-04-12 19:24       ` Dumitrescu, Cristian
2021-04-10  7:24     ` [dpdk-dev] [PATCH v3 4/4] net/mvpp2: " Li Zhang
2021-04-12 23:54     ` [dpdk-dev] [PATCH v3 0/4] Support PPS(packet per second) on meter Ferruh Yigit
2021-04-13  2:53       ` Li Zhang
2021-04-13  3:50 ` [dpdk-dev] [PATCH v4 " Li Zhang
2021-04-13  3:50   ` [dpdk-dev] [PATCH v4 1/4] ethdev: add packet mode in meter profile structure Li Zhang
2021-04-13  3:50   ` [dpdk-dev] [PATCH v4 2/4] app/testpmd: add meter profile packet mode option Li Zhang
2021-04-13  3:50   ` [dpdk-dev] [PATCH v4 3/4] net/softnic: check meter packet mode Li Zhang
2021-04-13  3:50   ` [dpdk-dev] [PATCH v4 4/4] net/mvpp2: " Li Zhang
2021-04-13  5:42     ` [dpdk-dev] [EXT] " Liron Himi
2021-04-13 10:24   ` [dpdk-dev] [PATCH v4 0/4] Support PPS(packet per second) on meter Ferruh Yigit
2021-04-13 11:02     ` Li Zhang
2021-04-13 11:05       ` Ferruh Yigit
2021-04-13 15:46         ` Li Zhang
2021-04-13 15:59 ` [dpdk-dev] [PATCH v5 " Li Zhang
2021-04-13 15:59   ` [dpdk-dev] [PATCH v5 1/4] ethdev: add packet mode in meter profile structure Li Zhang
2021-04-17 22:35     ` Thomas Monjalon
2021-04-13 15:59   ` [dpdk-dev] [PATCH v5 2/4] app/testpmd: add meter profile packet mode option Li Zhang
2021-04-13 16:09     ` Ajit Khaparde
2021-04-13 15:59   ` [dpdk-dev] [PATCH v5 3/4] net/softnic: check meter packet mode Li Zhang
2021-04-13 15:59   ` [dpdk-dev] [PATCH v5 4/4] net/mvpp2: " Li Zhang
2021-04-13 18:39   ` [dpdk-dev] [PATCH v5 0/4] Support PPS(packet per second) on meter Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DM6PR11MB2796336D67827B588445D982EB7C9@DM6PR11MB2796.namprd11.prod.outlook.com \
    --to=cristian.dumitrescu@intel.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=dekelp@nvidia.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=lizh@nvidia.com \
    --cc=matan@nvidia.com \
    --cc=orika@nvidia.com \
    --cc=rasland@nvidia.com \
    --cc=roniba@nvidia.com \
    --cc=shahafs@nvidia.com \
    --cc=thomas@monjalon.net \
    --cc=viacheslavo@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git