From: "Xu, Rosen" <rosen.xu@intel.com>
To: "Huang, Wei" <wei.huang@intel.com>, "dev@dpdk.org" <dev@dpdk.org>,
"thomas@monjalon.net" <thomas@monjalon.net>,
"nipun.gupta@nxp.com" <nipun.gupta@nxp.com>,
"hemant.agrawal@nxp.com" <hemant.agrawal@nxp.com>
Cc: "stable@dpdk.org" <stable@dpdk.org>,
"Zhang, Tianfei" <tianfei.zhang@intel.com>,
"Zhang, Qi Z" <qi.z.zhang@intel.com>
Subject: RE: [PATCH v3 5/5] guides/rawdevs: add description of ofs in ifpga doc
Date: Thu, 26 May 2022 06:47:54 +0000 [thread overview]
Message-ID: <DM6PR11MB42527CC1842BF8DF5583760789D99@DM6PR11MB4252.namprd11.prod.outlook.com> (raw)
In-Reply-To: <1653535974-1379-6-git-send-email-wei.huang@intel.com>
Hi Wei,
> -----Original Message-----
> From: Huang, Wei <wei.huang@intel.com>
> Sent: Thursday, May 26, 2022 11:33
> To: dev@dpdk.org; thomas@monjalon.net; nipun.gupta@nxp.com;
> hemant.agrawal@nxp.com
> Cc: stable@dpdk.org; Xu, Rosen <rosen.xu@intel.com>; Zhang, Tianfei
> <tianfei.zhang@intel.com>; Zhang, Qi Z <qi.z.zhang@intel.com>; Huang, Wei
> <wei.huang@intel.com>
> Subject: [PATCH v3 5/5] guides/rawdevs: add description of ofs in ifpga doc
>
> OFS (Open FPGA Stack) specification is introduced briefly.
>
> Signed-off-by: Wei Huang <wei.huang@intel.com>
> ---
> doc/guides/rawdevs/ifpga.rst | 114
> ++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 113 insertions(+), 1 deletion(-)
>
> diff --git a/doc/guides/rawdevs/ifpga.rst b/doc/guides/rawdevs/ifpga.rst
> index dbd0d6e..8809bfc 100644
> --- a/doc/guides/rawdevs/ifpga.rst
> +++ b/doc/guides/rawdevs/ifpga.rst
> @@ -1,5 +1,5 @@
> .. SPDX-License-Identifier: BSD-3-Clause
> - Copyright(c) 2018 Intel Corporation.
> + Copyright(c) 2018-2022 Intel Corporation.
>
> IFPGA Rawdev Driver
> ======================
> @@ -100,3 +100,115 @@ The following device parameters are supported:
>
> If null, the AFU Bit Stream has been PR in FPGA, if not forces PR and
> identifies AFU Bit Stream file.
> +
> +
> +Open FPGA Stack
> +=====================
> +
> +Open FPGA Stack (OFS) is a collection of RTL and open source software
> +providing interfaces to access the instantiated RTL easily in an FPGA.
> +OFS leverages the DFL for the implementation of the FPGA RTL design.
> +
> +OFS designs allow for the arrangement of software interfaces across
> +multiple PCIe endpoints. Some of these interfaces may be PFs defined in
> +the static region that connect to interfaces in an IP that is loaded via Partial
> Reconfiguration (PR).
> +And some of these interfaces may be VFs defined in the PR region that
> +can be reconfigured by the end-user. Furthermore, these PFs/VFs may use
> +DFLs such that features may be discovered and accessed in user space
> +(with the aid of a generic kernel driver like vfio-pci). The diagram
> +below depicts an example design with two PFs and two VFs. In this
> +example, it will export the management functions via PF0,
> +PF1 will bind with virtio-net driver presenting itself as a network
> +interface to the OS. The other functions, VF0 and VF1, leverage VFIO to
> +export the MMIO space to an application or assign to a VM.::
> +
> + +-----------------+ +--------------+ +-------------+ +------------+
> + | FPGA Management | | VirtIO | | User App | | Virtual |
> + | App | | App | | | | Machine |
> + +--------+--------+ +------+-------+ +------+------+ +-----+------+
> + | | | |
> + +--------+--------+ +------+-------+ +------+------+ |
> + | DFL Driver | |VirtIO driver | | VFIO | |
> + +--------+--------+ +------+-------+ +------+------+ |
> + | | | |
> + | | | |
> + +--------+--------+ +------+-------+ +------+------+ +----+------+
> + | PF0 | | PF1 | | PF0_VF0 | | PF0_VF1 |
> + +-----------------+ +--------------+ +-------------+ +-----------+
> +
> +As accelerators are specialized hardware, they are typically limited in
> +the number installed in a given system. Many use cases require them to
> +be shared across multiple software contexts or threads of software
> +execution, either through partitioning of individual dedicated
> +resources, or virtualization of shared resources. OFS provides several
> +models to share the AFU resources via PR mechanism and hardware-based
> virtualization schemes.
> +
> +1. Legacy model.
> + With legacy model FPGA cards like Intel PAC N3000 or N5000, there is
> + a notion that the boundary between the AFU and the shell is also the unit
> of
> + PR for those FPGA platforms. This model is only able to handle a
> + single context, because it only has one PR engine, and one PR region
> which
> + has an associated Port device.
> +2. Multiple VFs per PR slot.
> + In this model, available AFU resources may allow instantiation of many VFs
> + which have a dedicated PCIe function with their own dedicated MMIO
> space, or
> + partition a region of MMIO space on a single PCIe function. Intel PAC
> N6000
> + card has implemented this model.
> + In this model, the AFU/PR slot was not connected to port device. For DFL's
> view,
> + the Next_AFU pointer in FIU feature header of port device points to NULL
> in this
> + model, so in AFU driver perspective, there is no AFU MMIO region
> managed by
> + AFU driver. On the other hand, each VF can start with an AFU feature
> header without
> + being connected to a FIU Port feature header.
> +
> +In multiple VFs per PR slot model, the port device can still be
> +accessed using ioctls API which expose /dev/dfl-port.h device nodes,
> +like port reset, get port info, whose APIs were mentioned in AFU
> +section in this documentation. But it cannot access the AFU MMIO space
> +via AFU ioctl APIs like DFL_FPGA_PORT_DMA_MAP because there is no
> AFU
> +MMIO space managed in the AFU driver. Users can access the AFU resource
> +by creating VF devices via PCIe SRIOV interface, and then access the VF via
> VFIO driver or assign the VF to VM.
> +
> +In multiple VFs per PR slot model, the steps to enable VFs are
> +compatible with legacy mode which are mentioned in "FPGA virtualization
> +- PCIe SRIOV" section in this documentation.
> +
> +OFS provides the diversity for accessing the AFU resource to RTL developer.
> +An IP designer may choose to add more than one PF for interfacing with
> +IP on the FPGA and choose different model to access the AFU resource.
> +
> +There is one reference architecture design using the "Multiple VFs per PR
> slot"
> +model for OFS as illustrated below. In this reference design, it
> +exports the FPGA management functions via PF0. PF1 will bind with
> +virtio-net driver presenting itself as a network interface to the OS.
> +PF2 will bind to the vfio-pci driver allowing the user space software
> +to discover and interface with the specific workload like diagnostic
> +test. To access the AFU resource, it uses SR-IOV to partition workload
> interfaces across various VFs.::
> +
> + +----------------------+
> + | PF/VF mux/demux |
> + +--+--+-----+------+-+-+
> + | | | | |
> + +------------------------+ | | | |
> + PF0 | +---------+ +-+ | |
> + +---+---+ | +---+----+ | |
> + | DFH | | | DFH | | |
> + +-------+ +-----+----+ +--------+ | |
> + | FME | | VirtIO | | Test | | |
> + +---+---+ +----------+ +--------+ | |
> + | PF1 PF2 | |
> + | | |
> + | +----------+ |
> + | | ++
> + | | |
> + | | PF0_VF0 | PF0_VF1
> + | +-----------------+-----------+------------+
> + | | +-----+-----------+--------+ |
> + | | | | | | |
> + | | +------+ | +--+ -+ +--+---+ | |
> + | | | Port | | | DFH | | DFH | | |
> + +-----------+ +------+ | +-----+ +------+ | |
> + | | | DEV | | DEV | | |
> + | | +-----+ +------+ | |
> + | | PR Slot | |
> + | +--------------------------+ |
> + | Port Gasket |
> + +------------------------------------------+
> --
> 1.8.3.1
Reviewed-by Rosen Xu <rosen.xu@intel.com>
next prev parent reply other threads:[~2022-05-26 6:48 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-17 6:28 [PATCH v1 0/4] Support OFS card Wei Huang
2022-05-17 6:28 ` [PATCH v1 1/4] raw/ifpga: remove experimental tag from ifpga APIs Wei Huang
2022-05-17 6:28 ` [PATCH v1 2/4] raw/ifpga: remove vdev when ifpga is closed Wei Huang
2022-05-17 6:28 ` [PATCH v1 3/4] raw/ifpga: unregister interrupt in ifpga close function Wei Huang
2022-05-17 6:28 ` [PATCH v1 4/4] raw/ifpga: support ofs card probe Wei Huang
2022-05-18 8:29 ` [PATCH v2 0/4] Support OFS card Wei Huang
2022-05-18 8:29 ` [PATCH v2 1/4] raw/ifpga: remove experimental tag from ifpga APIs Wei Huang
2022-05-25 3:22 ` Zhang, Tianfei
2022-05-18 8:29 ` [PATCH v2 2/4] raw/ifpga: remove vdev when ifpga is closed Wei Huang
2022-05-25 4:09 ` Zhang, Tianfei
2022-05-18 8:29 ` [PATCH v2 3/4] raw/ifpga: unregister interrupt in ifpga close function Wei Huang
2022-05-25 3:26 ` Zhang, Tianfei
2022-05-18 8:29 ` [PATCH v2 4/4] raw/ifpga: support ofs card probe Wei Huang
2022-05-26 3:32 ` [PATCH v3 0/5] Support OFS card Wei Huang
2022-05-26 3:32 ` [PATCH v3 1/5] raw/ifpga: remove experimental tag from ifpga APIs Wei Huang
2022-05-26 6:29 ` Xu, Rosen
2022-05-26 3:32 ` [PATCH v3 2/5] raw/ifpga: remove vdev when ifpga is closed Wei Huang
2022-05-26 6:34 ` Xu, Rosen
2022-05-26 3:32 ` [PATCH v3 3/5] raw/ifpga: unregister interrupt in ifpga close function Wei Huang
2022-05-26 6:41 ` Xu, Rosen
2022-05-27 2:57 ` Zhang, Tianfei
2022-05-26 3:32 ` [PATCH v3 4/5] raw/ifpga: support ofs card probe Wei Huang
2022-05-26 6:46 ` Xu, Rosen
2022-05-27 3:10 ` Zhang, Tianfei
2022-05-26 3:32 ` [PATCH v3 5/5] guides/rawdevs: add description of ofs in ifpga doc Wei Huang
2022-05-26 6:47 ` Xu, Rosen [this message]
2022-05-27 3:19 ` Zhang, Tianfei
2022-05-27 8:33 ` [PATCH v4 0/5] Support OFS card Wei Huang
2022-05-27 8:33 ` [PATCH v4 1/5] raw/ifpga: remove experimental tag from ifpga APIs Wei Huang
2022-05-27 8:33 ` [PATCH v4 2/5] raw/ifpga: remove vdev when ifpga is closed Wei Huang
2022-06-06 6:46 ` Zhang, Tianfei
2022-06-07 6:02 ` Xu, Rosen
2022-05-27 8:33 ` [PATCH v4 3/5] raw/ifpga: unregister interrupt in ifpga close function Wei Huang
2022-06-07 6:03 ` Xu, Rosen
2022-05-27 8:33 ` [PATCH v4 4/5] raw/ifpga: support ofs card probe Wei Huang
2022-06-07 6:04 ` Xu, Rosen
2022-05-27 8:33 ` [PATCH v4 5/5] guides/rawdevs: add description of ofs in ifpga doc Wei Huang
2022-05-31 0:24 ` Zhang, Tianfei
2022-06-06 6:45 ` Zhang, Tianfei
2022-06-07 9:07 ` [PATCH v5 0/5] Support OFS card Wei Huang
2022-06-07 9:07 ` [PATCH v5 1/5] raw/ifpga: remove experimental tag from ifpga APIs Wei Huang
2022-06-07 9:07 ` [PATCH v5 2/5] raw/ifpga: remove vdev when ifpga is closed Wei Huang
2022-06-07 9:07 ` [PATCH v5 3/5] raw/ifpga: unregister interrupt in ifpga close function Wei Huang
2022-06-07 9:07 ` [PATCH v5 4/5] raw/ifpga: support ofs card probe Wei Huang
2022-06-07 9:07 ` [PATCH v5 5/5] guides/rawdevs: add description of ofs in ifpga doc Wei Huang
2022-06-07 13:53 ` [PATCH v5 0/5] Support OFS card Thomas Monjalon
2022-05-25 3:18 ` [PATCH v1 4/4] raw/ifpga: support ofs card probe Zhang, Tianfei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM6PR11MB42527CC1842BF8DF5583760789D99@DM6PR11MB4252.namprd11.prod.outlook.com \
--to=rosen.xu@intel.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=nipun.gupta@nxp.com \
--cc=qi.z.zhang@intel.com \
--cc=stable@dpdk.org \
--cc=thomas@monjalon.net \
--cc=tianfei.zhang@intel.com \
--cc=wei.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).