From: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>
To: Luc Pelletier <lucp.at.work@gmail.com>,
"Richardson, Bruce" <bruce.richardson@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
"Li, Xiaoyun" <xiaoyun.li@intel.com>,
"stable@dpdk.org" <stable@dpdk.org>
Subject: RE: [PATCH v5] eal: fix unaligned loads/stores in rte_memcpy_generic
Date: Fri, 4 Feb 2022 17:16:39 +0000 [thread overview]
Message-ID: <DM6PR11MB44913826A818C4AAF6831B749A299@DM6PR11MB4491.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20220117153711.32829-1-lucp.at.work@gmail.com>
> Calls to rte_memcpy_generic could result in unaligned loads/stores for
> 1 < n < 16. This is undefined behavior according to the C standard,
> and it gets flagged by the clang undefined behavior sanitizer.
>
> rte_memcpy_generic is called with unaligned src and dst addresses.
> When 1 < n < 16, the code would cast both src and dst to a qword,
> dword or word pointer, without verifying the alignment of src/dst. The
> code was changed to use a packed structure to perform the unaligned
> load/store operations. This results in unaligned load/store operations
> to be C standards-compliant.
Still not sure we need to fix that:
This is x86 specific code-path, and as I remember on x86 there are no
penalties for unaligned access to 2/4/8 byte values.
Though I like introduction of rte_mov15_or_less() function -t helps
with code dedup.
>
> Fixes: d35cc1fe6a7a ("eal/x86: revert select optimized memcpy at run-time")
> Cc: Xiaoyun Li <xiaoyun.li@intel.com>
> Cc: stable@dpdk.org
>
> Signed-off-by: Luc Pelletier <lucp.at.work@gmail.com>
> ---
>
> Thanks to Stephen's pointer to look at the linux kernel, I was able to
> find a way to perform the unaligned load/store using pure C code. The
> new functions added to perform the load/store could likely be moved to a
> different file and the code duplication could likely be eliminated by
> using a macro. However, I will hold off on making these changes until I
> get confirmation from maintainers that this technique is acceptable and
> this is what we want to move forward with.
>
> lib/eal/x86/include/rte_memcpy.h | 142 +++++++++++++++++--------------
> 1 file changed, 80 insertions(+), 62 deletions(-)
>
> diff --git a/lib/eal/x86/include/rte_memcpy.h b/lib/eal/x86/include/rte_memcpy.h
> index 1b6c6e585f..4e876d39eb 100644
> --- a/lib/eal/x86/include/rte_memcpy.h
> +++ b/lib/eal/x86/include/rte_memcpy.h
> @@ -45,6 +45,83 @@ extern "C" {
> static __rte_always_inline void *
> rte_memcpy(void *dst, const void *src, size_t n);
>
> +static __rte_always_inline uint64_t
> +rte_load_unaligned_uint64(const void *ptr)
> +{
> + struct unaligned_uint64 { uint64_t val; } __rte_packed;
> + return ((const struct unaligned_uint64 *)ptr)->val;
> +}
> +
> +static __rte_always_inline uint32_t
> +rte_load_unaligned_uint32(const void *ptr)
> +{
> + struct unaligned_uint32 { uint32_t val; } __rte_packed;
> + return ((const struct unaligned_uint32 *)ptr)->val;
> +}
> +
> +static __rte_always_inline uint16_t
> +rte_load_unaligned_uint16(const void *ptr)
> +{
> + struct unaligned_uint16 { uint16_t val; } __rte_packed;
> + return ((const struct unaligned_uint16 *)ptr)->val;
> +}
> +
> +static __rte_always_inline void
> +rte_store_unaligned_uint64(void *ptr, uint64_t val)
> +{
> + struct unaligned_uint64 { uint64_t val; } __rte_packed;
> + ((struct unaligned_uint64 *)ptr)->val = val;
> +}
> +
> +static __rte_always_inline void
> +rte_store_unaligned_uint32(void *ptr, uint32_t val)
> +{
> + struct unaligned_uint32 { uint32_t val; } __rte_packed;
> + ((struct unaligned_uint32 *)ptr)->val = val;
> +}
> +
> +static __rte_always_inline void
> +rte_store_unaligned_uint16(void *ptr, uint16_t val)
> +{
> + struct unaligned_uint16 { uint16_t val; } __rte_packed;
> + ((struct unaligned_uint16 *)ptr)->val = val;
> +}
> +
> +/**
> + * Copy bytes from one location to another,
> + * locations should not overlap.
> + * Use with unaligned src/dst, and n <= 15.
> + */
> +static __rte_always_inline void *
> +rte_mov15_or_less_unaligned(void *dst, const void *src, size_t n)
> +{
> + void *ret = dst;
> + if (n & 8) {
> + rte_store_unaligned_uint64(
> + dst,
> + rte_load_unaligned_uint64(src));
> + src = ((const uint64_t *)src + 1);
> + dst = ((uint64_t *)dst + 1);
> + }
> + if (n & 4) {
> + rte_store_unaligned_uint32(
> + dst,
> + rte_load_unaligned_uint32(src));
> + src = ((const uint32_t *)src + 1);
> + dst = ((uint32_t *)dst + 1);
> + }
> + if (n & 2) {
> + rte_store_unaligned_uint16(
> + dst,
> + rte_load_unaligned_uint16(src));
> + src = ((const uint16_t *)src + 1);
> + dst = ((uint16_t *)dst + 1);
> + }
> + if (n & 1)
> + *(uint8_t *)dst = *(const uint8_t *)src;
> + return ret;
> +}
> +
> #if defined __AVX512F__ && defined RTE_MEMCPY_AVX512
>
> #define ALIGNMENT_MASK 0x3F
> @@ -171,8 +248,6 @@ rte_mov512blocks(uint8_t *dst, const uint8_t *src, size_t n)
> static __rte_always_inline void *
> rte_memcpy_generic(void *dst, const void *src, size_t n)
> {
> - uintptr_t dstu = (uintptr_t)dst;
> - uintptr_t srcu = (uintptr_t)src;
> void *ret = dst;
> size_t dstofss;
> size_t bits;
> @@ -181,24 +256,7 @@ rte_memcpy_generic(void *dst, const void *src, size_t n)
> * Copy less than 16 bytes
> */
> if (n < 16) {
> - if (n & 0x01) {
> - *(uint8_t *)dstu = *(const uint8_t *)srcu;
> - srcu = (uintptr_t)((const uint8_t *)srcu + 1);
> - dstu = (uintptr_t)((uint8_t *)dstu + 1);
> - }
> - if (n & 0x02) {
> - *(uint16_t *)dstu = *(const uint16_t *)srcu;
> - srcu = (uintptr_t)((const uint16_t *)srcu + 1);
> - dstu = (uintptr_t)((uint16_t *)dstu + 1);
> - }
> - if (n & 0x04) {
> - *(uint32_t *)dstu = *(const uint32_t *)srcu;
> - srcu = (uintptr_t)((const uint32_t *)srcu + 1);
> - dstu = (uintptr_t)((uint32_t *)dstu + 1);
> - }
> - if (n & 0x08)
> - *(uint64_t *)dstu = *(const uint64_t *)srcu;
> - return ret;
> + return rte_mov15_or_less_unaligned(dst, src, n);
> }
>
> /**
> @@ -379,8 +437,6 @@ rte_mov128blocks(uint8_t *dst, const uint8_t *src, size_t n)
> static __rte_always_inline void *
> rte_memcpy_generic(void *dst, const void *src, size_t n)
> {
> - uintptr_t dstu = (uintptr_t)dst;
> - uintptr_t srcu = (uintptr_t)src;
> void *ret = dst;
> size_t dstofss;
> size_t bits;
> @@ -389,25 +445,7 @@ rte_memcpy_generic(void *dst, const void *src, size_t n)
> * Copy less than 16 bytes
> */
> if (n < 16) {
> - if (n & 0x01) {
> - *(uint8_t *)dstu = *(const uint8_t *)srcu;
> - srcu = (uintptr_t)((const uint8_t *)srcu + 1);
> - dstu = (uintptr_t)((uint8_t *)dstu + 1);
> - }
> - if (n & 0x02) {
> - *(uint16_t *)dstu = *(const uint16_t *)srcu;
> - srcu = (uintptr_t)((const uint16_t *)srcu + 1);
> - dstu = (uintptr_t)((uint16_t *)dstu + 1);
> - }
> - if (n & 0x04) {
> - *(uint32_t *)dstu = *(const uint32_t *)srcu;
> - srcu = (uintptr_t)((const uint32_t *)srcu + 1);
> - dstu = (uintptr_t)((uint32_t *)dstu + 1);
> - }
> - if (n & 0x08) {
> - *(uint64_t *)dstu = *(const uint64_t *)srcu;
> - }
> - return ret;
> + return rte_mov15_or_less_unaligned(dst, src, n);
> }
>
> /**
> @@ -672,8 +710,6 @@ static __rte_always_inline void *
> rte_memcpy_generic(void *dst, const void *src, size_t n)
> {
> __m128i xmm0, xmm1, xmm2, xmm3, xmm4, xmm5, xmm6, xmm7, xmm8;
> - uintptr_t dstu = (uintptr_t)dst;
> - uintptr_t srcu = (uintptr_t)src;
> void *ret = dst;
> size_t dstofss;
> size_t srcofs;
> @@ -682,25 +718,7 @@ rte_memcpy_generic(void *dst, const void *src, size_t n)
> * Copy less than 16 bytes
> */
> if (n < 16) {
> - if (n & 0x01) {
> - *(uint8_t *)dstu = *(const uint8_t *)srcu;
> - srcu = (uintptr_t)((const uint8_t *)srcu + 1);
> - dstu = (uintptr_t)((uint8_t *)dstu + 1);
> - }
> - if (n & 0x02) {
> - *(uint16_t *)dstu = *(const uint16_t *)srcu;
> - srcu = (uintptr_t)((const uint16_t *)srcu + 1);
> - dstu = (uintptr_t)((uint16_t *)dstu + 1);
> - }
> - if (n & 0x04) {
> - *(uint32_t *)dstu = *(const uint32_t *)srcu;
> - srcu = (uintptr_t)((const uint32_t *)srcu + 1);
> - dstu = (uintptr_t)((uint32_t *)dstu + 1);
> - }
> - if (n & 0x08) {
> - *(uint64_t *)dstu = *(const uint64_t *)srcu;
> - }
> - return ret;
> + return rte_mov15_or_less_unaligned(dst, src, n);
> }
>
> /**
> --
> 2.25.1
next prev parent reply other threads:[~2022-02-04 17:17 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-15 19:41 [PATCH] " Luc Pelletier
2022-01-15 21:39 ` [PATCH v2] " Luc Pelletier
2022-01-15 22:13 ` Stephen Hemminger
2022-01-16 14:09 ` Luc Pelletier
2022-01-16 16:32 ` Stephen Hemminger
2022-01-24 23:21 ` Georg Sauthoff
2022-01-25 7:59 ` Morten Brørup
2022-01-25 19:57 ` Luc Pelletier
2022-01-16 14:13 ` [PATCH v3] " Luc Pelletier
2022-01-16 14:33 ` Luc Pelletier
2022-01-16 16:34 ` Stephen Hemminger
2022-01-16 17:59 ` Morten Brørup
2022-01-16 20:33 ` [PATCH v4] " Luc Pelletier
2022-01-17 15:37 ` [PATCH v5] " Luc Pelletier
2022-02-04 16:42 ` Luc Pelletier
2022-02-04 17:16 ` Ananyev, Konstantin [this message]
2022-02-08 16:53 ` Thomas Monjalon
2022-02-09 15:05 ` Luc Pelletier
2022-02-10 14:04 ` Ananyev, Konstantin
2022-02-10 16:56 ` Luc Pelletier
2022-02-11 15:51 ` Ananyev, Konstantin
2022-02-13 22:31 ` Luc Pelletier
2022-02-14 13:41 ` Ananyev, Konstantin
2022-02-25 15:51 ` [PATCH v6] eal: fix rte_memcpy strict aliasing/alignment bugs Luc Pelletier
2022-02-25 16:38 ` [PATCH v7] " Luc Pelletier
2022-03-10 14:55 ` Ananyev, Konstantin
2022-04-07 15:24 ` David Marchand
2022-04-07 15:32 ` David Marchand
2022-04-07 15:40 ` David Marchand
2022-05-13 19:15 ` Luc Pelletier
2022-05-19 16:41 ` David Marchand
2022-04-08 13:47 ` Luc Pelletier
2022-05-19 16:47 ` David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM6PR11MB44913826A818C4AAF6831B749A299@DM6PR11MB4491.namprd11.prod.outlook.com \
--to=konstantin.ananyev@intel.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=lucp.at.work@gmail.com \
--cc=stable@dpdk.org \
--cc=xiaoyun.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).