From: "Ji, Kai" <kai.ji@intel.com>
To: "Dooley, Brian" <brian.dooley@intel.com>,
"De Lara Guarch, Pablo" <pablo.de.lara.guarch@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "gakhil@marvell.com" <gakhil@marvell.com>
Subject: Re: [PATCH v1] crypto/ipsec_mb: use new ipad/opad calculation API
Date: Mon, 24 Jun 2024 14:33:27 +0000 [thread overview]
Message-ID: <DS0PR11MB7458B4C3656E7142A7217CB981D42@DS0PR11MB7458.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20240605084844.270122-1-brian.dooley@intel.com>
[-- Attachment #1: Type: text/plain, Size: 7793 bytes --]
Acked-by: Kai Ji <kai.ji@intel.com>
________________________________
From: Dooley, Brian <brian.dooley@intel.com>
Sent: 05 June 2024 09:48
To: Ji, Kai <kai.ji@intel.com>; De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>
Cc: dev@dpdk.org <dev@dpdk.org>; gakhil@marvell.com <gakhil@marvell.com>; Dooley, Brian <brian.dooley@intel.com>
Subject: [PATCH v1] crypto/ipsec_mb: use new ipad/opad calculation API
From: Pablo de Lara <pablo.de.lara.guarch@intel.com>
IPSec Multi-buffer library v1.4 added a new API to
calculate inner/outer padding for HMAC-SHAx/MD5.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Brian Dooley <brian.dooley@intel.com>
---
drivers/crypto/ipsec_mb/pmd_aesni_mb.c | 34 +++++++++++++++++++++++++-
1 file changed, 33 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/ipsec_mb/pmd_aesni_mb.c b/drivers/crypto/ipsec_mb/pmd_aesni_mb.c
index 69a546697b..b3fdea02ff 100644
--- a/drivers/crypto/ipsec_mb/pmd_aesni_mb.c
+++ b/drivers/crypto/ipsec_mb/pmd_aesni_mb.c
@@ -13,6 +13,7 @@ struct aesni_mb_op_buf_data {
uint32_t offset;
};
+#if IMB_VERSION(1, 3, 0) >= IMB_VERSION_NUM
/**
* Calculate the authentication pre-computes
*
@@ -55,6 +56,7 @@ calculate_auth_precomputes(hash_one_block_t one_block_hash,
memset(ipad_buf, 0, blocksize);
memset(opad_buf, 0, blocksize);
}
+#endif
static inline int
is_aead_algo(IMB_HASH_ALG hash_alg, IMB_CIPHER_MODE cipher_mode)
@@ -66,12 +68,14 @@ is_aead_algo(IMB_HASH_ALG hash_alg, IMB_CIPHER_MODE cipher_mode)
/** Set session authentication parameters */
static int
-aesni_mb_set_session_auth_parameters(const IMB_MGR *mb_mgr,
+aesni_mb_set_session_auth_parameters(IMB_MGR *mb_mgr,
struct aesni_mb_session *sess,
const struct rte_crypto_sym_xform *xform)
{
+#if IMB_VERSION(1, 3, 0) >= IMB_VERSION_NUM
hash_one_block_t hash_oneblock_fn = NULL;
unsigned int key_larger_block_size = 0;
+#endif
uint8_t hashed_key[HMAC_MAX_BLOCK_SIZE] = { 0 };
uint32_t auth_precompute = 1;
@@ -267,18 +271,24 @@ aesni_mb_set_session_auth_parameters(const IMB_MGR *mb_mgr,
switch (xform->auth.algo) {
case RTE_CRYPTO_AUTH_MD5_HMAC:
sess->template_job.hash_alg = IMB_AUTH_MD5;
+#if IMB_VERSION(1, 3, 0) >= IMB_VERSION_NUM
hash_oneblock_fn = mb_mgr->md5_one_block;
+#endif
break;
case RTE_CRYPTO_AUTH_SHA1_HMAC:
sess->template_job.hash_alg = IMB_AUTH_HMAC_SHA_1;
+#if IMB_VERSION(1, 3, 0) >= IMB_VERSION_NUM
hash_oneblock_fn = mb_mgr->sha1_one_block;
+#endif
if (xform->auth.key.length > get_auth_algo_blocksize(
IMB_AUTH_HMAC_SHA_1)) {
IMB_SHA1(mb_mgr,
xform->auth.key.data,
xform->auth.key.length,
hashed_key);
+#if IMB_VERSION(1, 3, 0) >= IMB_VERSION_NUM
key_larger_block_size = 1;
+#endif
}
break;
case RTE_CRYPTO_AUTH_SHA1:
@@ -287,14 +297,18 @@ aesni_mb_set_session_auth_parameters(const IMB_MGR *mb_mgr,
break;
case RTE_CRYPTO_AUTH_SHA224_HMAC:
sess->template_job.hash_alg = IMB_AUTH_HMAC_SHA_224;
+#if IMB_VERSION(1, 3, 0) >= IMB_VERSION_NUM
hash_oneblock_fn = mb_mgr->sha224_one_block;
+#endif
if (xform->auth.key.length > get_auth_algo_blocksize(
IMB_AUTH_HMAC_SHA_224)) {
IMB_SHA224(mb_mgr,
xform->auth.key.data,
xform->auth.key.length,
hashed_key);
+#if IMB_VERSION(1, 3, 0) >= IMB_VERSION_NUM
key_larger_block_size = 1;
+#endif
}
break;
case RTE_CRYPTO_AUTH_SHA224:
@@ -303,14 +317,18 @@ aesni_mb_set_session_auth_parameters(const IMB_MGR *mb_mgr,
break;
case RTE_CRYPTO_AUTH_SHA256_HMAC:
sess->template_job.hash_alg = IMB_AUTH_HMAC_SHA_256;
+#if IMB_VERSION(1, 3, 0) >= IMB_VERSION_NUM
hash_oneblock_fn = mb_mgr->sha256_one_block;
+#endif
if (xform->auth.key.length > get_auth_algo_blocksize(
IMB_AUTH_HMAC_SHA_256)) {
IMB_SHA256(mb_mgr,
xform->auth.key.data,
xform->auth.key.length,
hashed_key);
+#if IMB_VERSION(1, 3, 0) >= IMB_VERSION_NUM
key_larger_block_size = 1;
+#endif
}
break;
case RTE_CRYPTO_AUTH_SHA256:
@@ -319,14 +337,18 @@ aesni_mb_set_session_auth_parameters(const IMB_MGR *mb_mgr,
break;
case RTE_CRYPTO_AUTH_SHA384_HMAC:
sess->template_job.hash_alg = IMB_AUTH_HMAC_SHA_384;
+#if IMB_VERSION(1, 3, 0) >= IMB_VERSION_NUM
hash_oneblock_fn = mb_mgr->sha384_one_block;
+#endif
if (xform->auth.key.length > get_auth_algo_blocksize(
IMB_AUTH_HMAC_SHA_384)) {
IMB_SHA384(mb_mgr,
xform->auth.key.data,
xform->auth.key.length,
hashed_key);
+#if IMB_VERSION(1, 3, 0) >= IMB_VERSION_NUM
key_larger_block_size = 1;
+#endif
}
break;
case RTE_CRYPTO_AUTH_SHA384:
@@ -335,14 +357,18 @@ aesni_mb_set_session_auth_parameters(const IMB_MGR *mb_mgr,
break;
case RTE_CRYPTO_AUTH_SHA512_HMAC:
sess->template_job.hash_alg = IMB_AUTH_HMAC_SHA_512;
+#if IMB_VERSION(1, 3, 0) >= IMB_VERSION_NUM
hash_oneblock_fn = mb_mgr->sha512_one_block;
+#endif
if (xform->auth.key.length > get_auth_algo_blocksize(
IMB_AUTH_HMAC_SHA_512)) {
IMB_SHA512(mb_mgr,
xform->auth.key.data,
xform->auth.key.length,
hashed_key);
+#if IMB_VERSION(1, 3, 0) >= IMB_VERSION_NUM
key_larger_block_size = 1;
+#endif
}
break;
case RTE_CRYPTO_AUTH_SHA512:
@@ -376,6 +402,11 @@ aesni_mb_set_session_auth_parameters(const IMB_MGR *mb_mgr,
return 0;
/* Calculate Authentication precomputes */
+#if IMB_VERSION(1, 3, 0) < IMB_VERSION_NUM
+ imb_hmac_ipad_opad(mb_mgr, sess->template_job.hash_alg,
+ xform->auth.key.data, xform->auth.key.length,
+ sess->auth.pads.inner, sess->auth.pads.outer);
+#else
if (key_larger_block_size) {
calculate_auth_precomputes(hash_oneblock_fn,
sess->auth.pads.inner, sess->auth.pads.outer,
@@ -389,6 +420,7 @@ aesni_mb_set_session_auth_parameters(const IMB_MGR *mb_mgr,
xform->auth.key.length,
get_auth_algo_blocksize(sess->template_job.hash_alg));
}
+#endif
sess->template_job.u.HMAC._hashed_auth_key_xor_ipad =
sess->auth.pads.inner;
sess->template_job.u.HMAC._hashed_auth_key_xor_opad =
--
2.25.1
[-- Attachment #2: Type: text/html, Size: 18651 bytes --]
next prev parent reply other threads:[~2024-06-24 14:33 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-05 8:48 Brian Dooley
2024-06-10 8:19 ` Dooley, Brian
2024-06-20 9:00 ` Dooley, Brian
2024-06-24 14:33 ` Ji, Kai [this message]
2024-06-27 14:35 ` Wathsala Wathawana Vithanage
2024-07-03 17:26 ` Akhil Goyal
2024-07-02 13:32 ` Patrick Robb
-- strict thread matches above, loose matches on Subject: below --
2023-12-14 16:41 Brian Dooley
2024-02-08 16:15 ` Power, Ciara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DS0PR11MB7458B4C3656E7142A7217CB981D42@DS0PR11MB7458.namprd11.prod.outlook.com \
--to=kai.ji@intel.com \
--cc=brian.dooley@intel.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=pablo.de.lara.guarch@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).