From: "De Lara Guarch, Pablo" <pablo.de.lara.guarch@intel.com>
To: "Pattan, Reshma" <reshma.pattan@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
Date: Fri, 26 Sep 2014 15:11:44 +0000 [thread overview]
Message-ID: <E115CCD9D858EF4F90C690B0DCB4D89722626933@IRSMSX108.ger.corp.intel.com> (raw)
In-Reply-To: <1411568210-2555-1-git-send-email-reshma.pattan@intel.com>
Hi,
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of reshmapa
> Sent: Wednesday, September 24, 2014 3:17 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v2] distributor_app: new sample app
>
> From: Reshma Pattan <reshma.pattan@intel.com>
>
> A new sample app that shows the usage of the distributor library. This
> app works as follows:
>
> * An RX thread runs which pulls packets from each ethernet port in turn
> and passes those packets to worker using a distributor component.
> * The workers take the packets in turn, and determine the output port
> for those packets using basic l2forwarding doing an xor on the source
> port id.
> * The RX thread takes the returned packets from the workers and enqueue
> those packets into an rte_ring structure.
> * A TX thread pulls the packets off the rte_ring structure and then
> sends each packet out the output port specified previously by the worker
> * Command-line option support provided only for portmask.
>
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
> ---
> examples/Makefile | 1 +
> examples/distributor_app/Makefile | 57 ++++
> examples/distributor_app/main.c | 585
> ++++++++++++++++++++++++++++++++++++++
> examples/distributor_app/main.h | 46 +++
> 4 files changed, 689 insertions(+)
> create mode 100644 examples/distributor_app/Makefile
> create mode 100644 examples/distributor_app/main.c
> create mode 100644 examples/distributor_app/main.h
>
> diff --git a/examples/Makefile b/examples/Makefile
> index 6245f83..2ba82b0 100644
> --- a/examples/Makefile
> +++ b/examples/Makefile
> @@ -66,5 +66,6 @@ DIRS-y += vhost
> DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
> DIRS-y += vmdq
> DIRS-y += vmdq_dcb
> +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
>
> include $(RTE_SDK)/mk/rte.extsubdir.mk
> diff --git a/examples/distributor_app/Makefile
> b/examples/distributor_app/Makefile
> new file mode 100644
> index 0000000..394785d
> --- /dev/null
> +++ b/examples/distributor_app/Makefile
> @@ -0,0 +1,57 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> +
> +ifeq ($(RTE_SDK),)
> +$(error "Please define RTE_SDK environment variable")
> +endif
> +
> +# Default target, can be overriden by command line or environment
> +RTE_TARGET ?= x86_64-default-linuxapp-gcc
This target is not present anymore. Change it to x86_64-native-linuxapp-gcc.
> +
> +include $(RTE_SDK)/mk/rte.vars.mk
> +
> +# binary name
> +APP = distributor_app
> +
> +# all source are stored in SRCS-y
> +SRCS-y := main.c
> +
> +CFLAGS += $(WERROR_FLAGS)
> +
> +# workaround for a gcc bug with noreturn attribute
> +# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
> +CFLAGS_main.o += -Wno-return-type
> +endif
> +
> +EXTRA_CFLAGS += -O3 -Wfatal-errors
> +
> +include $(RTE_SDK)/mk/rte.extapp.mk
> diff --git a/examples/distributor_app/main.c
> b/examples/distributor_app/main.c
> new file mode 100644
> index 0000000..628810a
> --- /dev/null
> +++ b/examples/distributor_app/main.c
> @@ -0,0 +1,585 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> + */
> +
> +#include <stdint.h>
> +#include <inttypes.h>
> +#include <unistd.h>
> +#include <signal.h>
> +#include <getopt.h>
> +
> +#include <rte_eal.h>
> +#include <rte_ethdev.h>
> +#include <rte_cycles.h>
> +#include <rte_malloc.h>
> +#include <rte_debug.h>
> +#include <rte_distributor.h>
> +
> +#include "main.h"
> +
> +#define RX_RING_SIZE 256
> +#define RX_FREE_THRESH 32
> +#define RX_PTHRESH 8
> +#define RX_HTHRESH 8
> +#define RX_WTHRESH 0
> +
> +#define TX_RING_SIZE 512
> +#define TX_FREE_THRESH 32
> +#define TX_PTHRESH 32
> +#define TX_HTHRESH 0
> +#define TX_WTHRESH 0
> +#define TX_RSBIT_THRESH 32
> +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS |
> ETH_TXQ_FLAGS_NOVLANOFFL |\
> + ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP |
> \
> + ETH_TXQ_FLAGS_NOXSUMTCP)
> +
> +#define NUM_MBUFS ((64*1024)-1)
> +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) +
> RTE_PKTMBUF_HEADROOM)
> +#define MBUF_CACHE_SIZE 250
> +#define BURST_SIZE 32
> +#define RTE_RING_SZ 1024
> +
> +/* mask of enabled ports */
> +static uint32_t enabled_port_mask = 0;
> +
> +static volatile struct app_stats {
> + struct {
> + uint64_t rx_pkts;
> + uint64_t returned_pkts;
> + uint64_t enqueued_pkts;
> + } rx __rte_cache_aligned;
> +
> + struct {
> + uint64_t dequeue_pkts;
> + uint64_t tx_pkts;
> + } tx __rte_cache_aligned;
> +} app_stats;
> +
> +static const struct rte_eth_conf port_conf_default = {
> + .rxmode = {
> + .mq_mode = ETH_MQ_RX_RSS,
> + .max_rx_pkt_len = ETHER_MAX_LEN,
> + .split_hdr_size = 0,
> + .header_split = 0, /**< Header Split disabled */
> + .hw_ip_checksum = 0, /**< IP checksum offload enabled */
> + .hw_vlan_filter = 0, /**< VLAN filtering disabled */
> + .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
> + .hw_strip_crc = 0, /**< CRC stripped by hardware */
> + },
> + .txmode = {
> + .mq_mode = ETH_MQ_TX_NONE,
> + },
> + .lpbk_mode = 0,
> + .rx_adv_conf = {
> + .rss_conf = {
> + .rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> + ETH_RSS_IPV4_TCP |
> ETH_RSS_IPV4_UDP |
> + ETH_RSS_IPV6_TCP |
> ETH_RSS_IPV6_UDP,
> + }
> + },
> +};
> +
> +static const struct rte_eth_rxconf rx_conf_default = {
> + .rx_thresh = {
> + .pthresh = RX_PTHRESH,
> + .hthresh = RX_HTHRESH,
> + .wthresh = RX_WTHRESH,
> + },
> + .rx_free_thresh = RX_FREE_THRESH,
> + .rx_drop_en = 0,
> +};
> +
> +static const struct rte_eth_txconf tx_conf_default = {
> + .tx_thresh = {
> + .pthresh = TX_PTHRESH,
> + .hthresh = TX_HTHRESH,
> + .wthresh = TX_WTHRESH,
> + },
> + .tx_free_thresh = TX_FREE_THRESH,
> + .tx_rs_thresh = TX_RSBIT_THRESH,
> + .txq_flags = TX_Q_FLAGS
> +
> +};
> +
> +struct output_buffer {
> + unsigned count;
> + struct rte_mbuf *mbufs[BURST_SIZE];
> +};
> +
> +/*
> + * Initialises a given port using global settings and with the rx buffers
> + * coming from the mbuf_pool passed as parameter
> + */
> +static inline int
> +port_init(uint8_t port, struct rte_mempool *mbuf_pool)
> +{
> + struct rte_eth_conf port_conf = port_conf_default;
> + const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> + int retval;
> + uint16_t q;
> +
> + if (port >= rte_eth_dev_count())
> + return -1;
> +
> + retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> + if (retval != 0)
> + return retval;
> +
> + for (q = 0; q < rxRings; q++) {
> + retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> +
> rte_eth_dev_socket_id(port),
> + &rx_conf_default,
> mbuf_pool);
> + if (retval < 0)
> + return retval;
> + }
> +
> + for (q = 0; q < txRings; q++) {
> + retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> +
> rte_eth_dev_socket_id(port),
> + &tx_conf_default);
> + if (retval < 0)
> + return retval;
> + }
> +
> + retval = rte_eth_dev_start(port);
> + if (retval < 0)
> + return retval;
> +
> + struct rte_eth_link link;
> + rte_eth_link_get_nowait(port, &link);
> + if (!link.link_status) {
> + sleep(1);
> + rte_eth_link_get_nowait(port, &link);
> + }
> +
> + if (!link.link_status) {
> + printf("Link down on port %"PRIu8"\n", port);
> + return 0;
> + }
> +
> + struct ether_addr addr;
> + rte_eth_macaddr_get(port, &addr);
> + printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> + " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> + (unsigned)port,
> + addr.addr_bytes[0], addr.addr_bytes[1],
> + addr.addr_bytes[2], addr.addr_bytes[3],
> + addr.addr_bytes[4], addr.addr_bytes[5]);
> +
> + rte_eth_promiscuous_enable(port);
> +
> + return 0;
> +}
> +
> +struct lcore_params {
> + unsigned worker_id;
> + struct rte_distributor *d;
> + struct rte_ring *r;
> +};
> +
> +static __attribute__((noreturn)) void
> +lcore_rx(struct lcore_params *p)
> +{
> + struct rte_distributor *d = p->d;
> + struct rte_ring *r = p->r;
> + const uint8_t nb_ports = rte_eth_dev_count();
> + const int socket_id = rte_socket_id();
> + uint8_t port;
> +
> + for (port = 0; port < nb_ports; port++) {
> + /* skip ports that are not enabled */
> + if ((enabled_port_mask & (1 << port)) == 0)
> + continue;
> +
> + if (rte_eth_dev_socket_id(port) > 0 &&
> + rte_eth_dev_socket_id(port) != socket_id)
> + printf("WARNING, port %u is on remote NUMA node
> to "
> + "RX thread.\n\tPerformance will not
> "
> + "be optimal.\n", port);
> + }
> +
> + printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> + port = 0;
> + for (;;) {
> + /* skip ports that are not enabled */
> + if ((enabled_port_mask & (1 << port)) == 0) {
> + if (++port == nb_ports)
> + port = 0;
> + continue;
> + }
> + struct rte_mbuf *bufs[BURST_SIZE*2];
> + const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> + BURST_SIZE);
> + app_stats.rx.rx_pkts += nb_rx;
> +
> + rte_distributor_process(d, bufs, nb_rx);
> + const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> + bufs, BURST_SIZE*2);
> + app_stats.rx.returned_pkts += nb_ret;
> + if (unlikely(nb_ret == 0))
> + continue;
> +
> + uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs,
> nb_ret);
> + app_stats.rx.enqueued_pkts += sent;
> + if (unlikely(sent < nb_ret)) {
> + printf("Packet loss due to full ring\n");
I would remove this printf. If core is too busy to process packets, this may make performance worse.
Statistics should reflect this packet loss.
> + while (sent < nb_ret)
> + rte_pktmbuf_free(bufs[sent++]);
> + }
> + if (++port == nb_ports)
> + port = 0;
> + }
> +}
> +
> +static inline void
> +flush_one_port(struct output_buffer *outbuf, uint8_t outp)
> +{
> + unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> + outbuf->count);
> + app_stats.tx.tx_pkts += nb_tx;
> +
> + if (unlikely(nb_tx < outbuf->count)) {
> + printf("Packet loss with tx_burst\n");
Same here. This is fine for debugging, but statistics are updated as well, so we do not need this printf.
> + do {
> + rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> + } while (++nb_tx < outbuf->count);
> + }
> + outbuf->count = 0;
> +}
> +
> +static inline void
> +flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
> +{
> + uint8_t outp;
> + for (outp = 0; outp < nb_ports; outp++) {
> + /* skip ports that are not enabled */
> + if ((enabled_port_mask & (1 << outp)) == 0)
> + continue;
> +
> + if (tx_buffers[outp].count == 0)
> + continue;
> +
> + flush_one_port(&tx_buffers[outp], outp);
> + }
> +}
> +
> +static __attribute__((noreturn)) void
> +lcore_tx(struct rte_ring *in_r)
> +{
> + static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
> + const uint8_t nb_ports = rte_eth_dev_count();
> + const int socket_id = rte_socket_id();
> + uint8_t port;
> +
> + for (port = 0; port < nb_ports; port++) {
> + /* skip ports that are not enabled */
> + if ((enabled_port_mask & (1 << port)) == 0)
> + continue;
> +
> + if (rte_eth_dev_socket_id(port) > 0 &&
> + rte_eth_dev_socket_id(port) != socket_id)
> + printf("WARNING, port %u is on remote NUMA node
> to "
> + "TX thread.\n\tPerformance will not "
> + "be optimal.\n", port);
> + }
> +
> + printf("\nCore %u doing packet TX.\n", rte_lcore_id());
> + for (;;) {
> + for (port = 0; port < nb_ports; port++) {
> + /* skip ports that are not enabled */
> + if ((enabled_port_mask & (1 << port)) == 0)
> + continue;
> +
> + struct rte_mbuf *bufs[BURST_SIZE];
> + const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
> + (void *)bufs, BURST_SIZE);
> + app_stats.tx.dequeue_pkts += nb_rx;
> +
> + /* if we get no traffic, flush anything we have */
> + if (unlikely(nb_rx == 0)) {
> + flush_all_ports(tx_buffers, nb_ports);
> + continue;
> + }
> +
> + /* for traffic we receive, queue it up for transmit */
> + uint16_t i;
> + _mm_prefetch(bufs[0], 0);
> + _mm_prefetch(bufs[1], 0);
> + _mm_prefetch(bufs[2], 0);
> + for (i = 0; i < nb_rx; i++) {
> + struct output_buffer *outbuf;
> + uint8_t outp;
> + _mm_prefetch(bufs[i + 3], 0);
> + /* workers should update in_port to hold the
> + * output port value */
> + outp = bufs[i]->port;
> + /* skip ports that are not enabled */
> + if ((enabled_port_mask & (1 << outp)) == 0)
> + continue;
> +
> + outbuf = &tx_buffers[outp];
> + outbuf->mbufs[outbuf->count++] = bufs[i];
> + if (outbuf->count == BURST_SIZE)
> + flush_one_port(outbuf, outp);
> + }
> + }
> + }
> +}
> +
> +
> +static __attribute__((noreturn)) void
> +lcore_worker(struct lcore_params *p)
> +{
> + struct rte_distributor *d = p->d;
> + const unsigned id = p->worker_id;
> + /* for single port, xor_val will be zero so we won't modify the output
> + * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
> + */
> + const unsigned xor_val = (rte_eth_dev_count() > 1);
> + struct rte_mbuf *buf = NULL;
> +
> + printf("\nCore %u acting as worker core.\n", rte_lcore_id());
> + for (;;) {
> + buf = rte_distributor_get_pkt(d, id, buf);
> + buf->port ^= xor_val;
> + }
> +}
> +
> +static void
> +int_handler(int sig_num)
> +{
> + struct rte_eth_stats eth_stats;
> + unsigned i;
> +
> + printf("Exiting on signal %d\n", sig_num);
> +
> + printf("\nRX thread stats:\n");
> + printf(" - Received: %"PRIu64"\n", app_stats.rx.rx_pkts);
> + printf(" - Processed: %"PRIu64"\n", app_stats.rx.returned_pkts);
> + printf(" - Enqueued: %"PRIu64"\n", app_stats.rx.enqueued_pkts);
> +
> + printf("\nTX thread stats:\n");
> + printf(" - Dequeued: %"PRIu64"\n", app_stats.tx.dequeue_pkts);
> + printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
> +
> + for (i = 0; i < rte_eth_dev_count(); i++) {
> + rte_eth_stats_get(i, ð_stats);
> + printf("\nPort %u stats:\n", i);
> + printf(" - Pkts in: %"PRIu64"\n", eth_stats.ipackets);
> + printf(" - Pkts out: %"PRIu64"\n", eth_stats.opackets);
> + printf(" - In Errs: %"PRIu64"\n", eth_stats.ierrors);
> + printf(" - Out Errs: %"PRIu64"\n", eth_stats.oerrors);
> + printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
> + }
> + exit(0);
> +}
> +
> +/* display usage */
> +static void
> +print_usage(const char *prgname)
> +{
> + printf("%s [EAL options] -- -p PORTMASK\n"
> + " -p PORTMASK: hexadecimal bitmask of ports to
> configure\n",
> + prgname);
> +}
> +
> +static int
> +parse_portmask(const char *portmask)
> +{
> + char *end = NULL;
> + unsigned long pm;
> +
> + /* parse hexadecimal string */
> + pm = strtoul(portmask, &end, 16);
> + if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
> + return -1;
> +
> + if (pm == 0)
> + return -1;
> +
> + return pm;
> +}
> +
> +/* Parse the argument given in the command line of the application */
> +static int
> +parse_args(int argc, char **argv)
> +{
> + int opt;
> + char **argvopt;
> + int option_index;
> + char *prgname = argv[0];
> + static struct option lgopts[] = {
> + {NULL, 0, 0, 0}
> + };
> +
> + argvopt = argv;
> +
> + while ((opt = getopt_long(argc, argvopt, "p:",
> + lgopts, &option_index)) != EOF) {
> +
> + switch (opt) {
> + /* portmask */
> + case 'p':
> + enabled_port_mask =
> parse_portmask(optarg);
> + if (enabled_port_mask == 0) {
> + printf("invalid portmask\n");
> + print_usage(prgname);
> + return -1;
> + }
> + break;
> +
> + default:
> + print_usage(prgname);
> + return -1;
> + }
> + }
> +
> +if (optind <= 1) {
> + print_usage(prgname);
> + return -1;
> +}
> +
> + argv[optind-1] = prgname;
> +
> + optind = 0; /* reset getopt lib */
> + return 0;
> +}
> +
> +/* Main function, does initialization and calls the per-lcore functions */
> +int
> +MAIN(int argc, char *argv[])
> +{
> + struct rte_mempool *mbuf_pool;
> + struct rte_distributor *d;
> + struct rte_ring *output_ring;
> + unsigned lcore_id, worker_id = 0;
> + unsigned nb_ports;
> + uint8_t portid;
> + uint8_t nb_ports_available;
> +
> + /* catch ctrl-c so we can print on exit */
> + signal(SIGINT, int_handler);
> +
> + /* init EAL */
> + int ret = rte_eal_init(argc, argv);
> + if (ret < 0)
> + rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
> + argc -= ret;
> + argv += ret;
> +
> + /* parse application arguments (after the EAL ones) */
> + ret = parse_args(argc, argv);
> + if (ret < 0)
> + rte_exit(EXIT_FAILURE, "Invalid distributor parameters\n");
> +
> + if (rte_lcore_count() < 3)
> + rte_exit(EXIT_FAILURE, "Error, This application needs at "
> + "least 3 logical cores to run:\n"
> + "1 lcore for packet RX and distribution\n"
> + "1 lcore for packet TX\n"
> + "and at least 1 lcore for worker threads\n");
> +
> + if (rte_eal_pci_probe() != 0)
> + rte_exit(EXIT_FAILURE, "Error with PCI probing\n");
> +
> + nb_ports = rte_eth_dev_count();
> + if (nb_ports == 0)
> + rte_exit(EXIT_FAILURE, "Error: no ethernet ports
> detected\n");
> + if (nb_ports != 1 && (nb_ports & 1))
> + rte_exit(EXIT_FAILURE, "Error: number of ports must be
> even, except "
> + "when using a single port\n");
> +
> + mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS *
> nb_ports,
> + MBUF_SIZE, MBUF_CACHE_SIZE,
> + sizeof(struct rte_pktmbuf_pool_private),
> + rte_pktmbuf_pool_init, NULL,
> + rte_pktmbuf_init, NULL,
> + rte_socket_id(), 0);
> + if (mbuf_pool == NULL)
> + rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
> +
> + nb_ports_available = nb_ports;
> +
> + /* initialize all ports */
> + for (portid = 0; portid < nb_ports; portid++) {
> + /* skip ports that are not enabled */
> + if ((enabled_port_mask & (1 << portid)) == 0) {
> + printf("\nSkipping disabled port %d\n", portid);
> + nb_ports_available--;
> + continue;
> + }
> + /* init port */
> + printf("Initializing port %u... done\n", (unsigned) portid);
> +
> + if (port_init(portid, mbuf_pool) != 0)
> + rte_exit(EXIT_FAILURE, "Cannot initialize port
> %"PRIu8"\n",
> + portid);
> + }
> +
> + if (!nb_ports_available) {
> + rte_exit(EXIT_FAILURE,
> + "All available ports are disabled. Please set
> portmask.\n");
> + }
> +
> + d = rte_distributor_create("PKT_DIST", rte_socket_id(),
> + rte_lcore_count() - 2);
> + if (d == NULL)
> + rte_exit(EXIT_FAILURE, "Cannot create distributor\n");
> +
> + /* scheduler ring is read only by the transmitter core, but written to
> + * by multiple threads
> + */
> + output_ring = rte_ring_create("Output_ring", RTE_RING_SZ,
> + rte_socket_id(), RING_F_SC_DEQ);
> + if (output_ring == NULL)
> + rte_exit(EXIT_FAILURE, "Cannot create output ring\n");
> +
> + RTE_LCORE_FOREACH_SLAVE(lcore_id) {
> + if (worker_id == rte_lcore_count() - 2)
> + rte_eal_remote_launch((lcore_function_t
> *)lcore_tx,
> + output_ring, lcore_id);
> + else {
> + struct lcore_params *p =
> + rte_malloc(NULL, sizeof(*p), 0);
> + if (!p)
> + rte_panic("malloc failure\n");
> + *p = (struct lcore_params){worker_id, d,
> output_ring};
> + rte_eal_remote_launch((lcore_function_t
> *)lcore_worker,
> + p, lcore_id);
> + }
> + worker_id++;
> + }
> + /* call lcore_main on master core only */
> + struct lcore_params p = { 0, d, output_ring };
> + lcore_rx(&p);
> + return 0;
> +}
> diff --git a/examples/distributor_app/main.h
> b/examples/distributor_app/main.h
> new file mode 100644
> index 0000000..2682d15
> --- /dev/null
> +++ b/examples/distributor_app/main.h
> @@ -0,0 +1,46 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> + */
> +
> +#ifndef _MAIN_H_
> +#define _MAIN_H_
> +
> +
> +#ifdef RTE_EXEC_ENV_BAREMETAL
> +#define MAIN _main
> +#else
> +#define MAIN main
> +#endif
> +
> +int MAIN(int argc, char *argv[]);
> +
> +#endif /* ifndef _MAIN_H_ */
> --
> 1.9.3
next prev parent reply other threads:[~2014-09-26 15:07 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-16 12:13 [dpdk-dev] [PATCH 0/3] distributor_app: new sample application for distributor library reshmapa
2014-09-16 12:13 ` [dpdk-dev] [PATCH 1/3] distributor_app: new sample app reshmapa
2014-09-16 12:13 ` [dpdk-dev] [PATCH 2/3] distributor_app: code review comments implementation reshmapa
2014-09-16 12:13 ` [dpdk-dev] [PATCH 3/3] distributor_app: removed extra spaces reshmapa
2014-09-23 12:55 ` [dpdk-dev] [PATCH 0/3] distributor_app: new sample application for distributor library Bruce Richardson
2014-09-24 14:16 ` [dpdk-dev] [PATCH v2] distributor_app: new sample app reshmapa
2014-09-26 15:11 ` De Lara Guarch, Pablo [this message]
2014-09-26 15:51 ` Ananyev, Konstantin
2014-09-29 12:39 ` Pattan, Reshma
2014-09-29 13:06 ` Ananyev, Konstantin
2014-09-29 13:35 ` De Lara Guarch, Pablo
2014-09-29 14:35 ` Neil Horman
2014-09-30 8:02 ` Pattan, Reshma
2014-09-30 9:21 ` Ananyev, Konstantin
2014-09-30 10:39 ` [dpdk-dev] [PATCH v3] " reshmapa
2014-09-30 11:34 ` Neil Horman
2014-09-30 12:18 ` Bruce Richardson
2014-09-30 13:39 ` Neil Horman
2014-10-01 14:47 ` Pattan, Reshma
2014-10-01 14:56 ` Neil Horman
2014-10-01 15:37 ` Bruce Richardson
2014-10-01 16:07 ` Neil Horman
2014-10-06 14:16 ` Pattan, Reshma
2014-10-06 14:44 ` Neil Horman
2014-10-06 17:34 ` Pattan, Reshma
2014-10-06 19:02 ` Neil Horman
2014-10-02 9:04 ` Ananyev, Konstantin
2014-10-01 13:33 ` [dpdk-dev] [PATCH v4] distributor_app: gracefull shutdown of tx/rx threads on SIGINT reshmapa
2014-10-01 13:46 ` Pattan, Reshma
2014-10-01 13:49 ` Thomas Monjalon
2014-10-01 14:33 ` [dpdk-dev] [PATCH v5] distributor_app: new sample app reshmapa
2014-10-17 13:59 ` [dpdk-dev] [PATCH v6] " Reshma Pattan
2014-11-02 20:08 ` De Lara Guarch, Pablo
2014-11-03 15:49 ` [dpdk-dev] [PATCH v7] " Reshma Pattan
2014-11-03 16:03 ` De Lara Guarch, Pablo
2014-11-13 21:30 ` Thomas Monjalon
2014-11-14 8:44 ` Pattan, Reshma
2014-11-16 21:59 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E115CCD9D858EF4F90C690B0DCB4D89722626933@IRSMSX108.ger.corp.intel.com \
--to=pablo.de.lara.guarch@intel.com \
--cc=dev@dpdk.org \
--cc=reshma.pattan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).