DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH 0/3] distributor_app: new sample application for distributor library
@ 2014-09-16 12:13 reshmapa
  2014-09-16 12:13 ` [dpdk-dev] [PATCH 1/3] distributor_app: new sample app reshmapa
                   ` (4 more replies)
  0 siblings, 5 replies; 38+ messages in thread
From: reshmapa @ 2014-09-16 12:13 UTC (permalink / raw)
  To: dev

From: Reshma Pattan <reshma.pattan@intel.com>

A new sample app that shows the usage of the distributor library. This
app works as follows:

*An RX thread runs which pulls packets from each ethernet port in turn
and passes those packets to worker using a distributor component.

*The workers take the packets in turn, and determine the output port
for those packets using basic l2forwarding doing an xor on the source
port id.

*The RX thread takes the returned packets from the workers and enqueue
those packets into an rte_ring structure.

*A TX thread pulls the packets off the rte_ring structure and then
sends each packet out the output port specified previously by the worker

Bruce Richardson (1):
  distributor_app: new sample app

Reshma Pattan (2):
  distributor_app: code review comments implementation
  distributor_app: removed extra spaces

 examples/Makefile                 |   1 +
 examples/distributor_app/Makefile |  57 ++++
 examples/distributor_app/main.c   | 586 ++++++++++++++++++++++++++++++++++++++
 examples/distributor_app/main.h   |  46 +++
 4 files changed, 690 insertions(+)
 create mode 100644 examples/distributor_app/Makefile
 create mode 100644 examples/distributor_app/main.c
 create mode 100644 examples/distributor_app/main.h

-- 
1.8.3.1

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [dpdk-dev]  [PATCH 1/3] distributor_app: new sample app
  2014-09-16 12:13 [dpdk-dev] [PATCH 0/3] distributor_app: new sample application for distributor library reshmapa
@ 2014-09-16 12:13 ` reshmapa
  2014-09-16 12:13 ` [dpdk-dev] [PATCH 2/3] distributor_app: code review comments implementation reshmapa
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 38+ messages in thread
From: reshmapa @ 2014-09-16 12:13 UTC (permalink / raw)
  To: dev

From: Bruce Richardson <bruce.richardson@intel.com>

A new sample app that shows the usage of the distributor library. This
app works as follows:

* An RX thread runs which pulls packets from each ethernet port in turn
  and passes those packets to worker using a distributor component.
* The workers take the packets in turn, and determine the output port
  for those packets using basic l2forwarding doing an xor on the source
  port id.
* The RX thread takes the returned packets from the workers and enqueue
  those packets into an rte_ring structure.
* A TX thread pulls the packets off the rte_ring structure and then
  sends each packet out the output port specified previously by the worker

The app takes no command-line parameters other than those passed to the
EAL. The cores to be used are specified via the EAL coremask and the
ports to be used can be specified using the EAL whitelisting and
blacklisting support.
---
 examples/Makefile                 |   1 +
 examples/distributor_app/Makefile |  57 +++++
 examples/distributor_app/main.c   | 459 ++++++++++++++++++++++++++++++++++++++
 examples/distributor_app/main.h   |  46 ++++
 4 files changed, 563 insertions(+)
 create mode 100644 examples/distributor_app/Makefile
 create mode 100644 examples/distributor_app/main.c
 create mode 100644 examples/distributor_app/main.h

diff --git a/examples/Makefile b/examples/Makefile
index d6b08c2..3164aab 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -64,5 +64,6 @@ DIRS-y += vhost
 DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
 DIRS-y += vmdq
 DIRS-y += vmdq_dcb
+DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
 
 include $(RTE_SDK)/mk/rte.extsubdir.mk
diff --git a/examples/distributor_app/Makefile b/examples/distributor_app/Makefile
new file mode 100644
index 0000000..d46746e
--- /dev/null
+++ b/examples/distributor_app/Makefile
@@ -0,0 +1,57 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-default-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = distributor_app
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+EXTRA_CFLAGS += -O3 -g -Wfatal-errors
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/distributor_app/main.c b/examples/distributor_app/main.c
new file mode 100644
index 0000000..45d5bc1
--- /dev/null
+++ b/examples/distributor_app/main.c
@@ -0,0 +1,459 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <signal.h>
+
+#include <rte_eal.h>
+#include <rte_ethdev.h>
+#include <rte_cycles.h>
+#include <rte_malloc.h>
+#include <rte_debug.h>
+#include <rte_distributor.h>
+#include "main.h"
+
+#define RX_RING_SIZE 256
+#define RX_FREE_THRESH 32
+#define RX_PTHRESH 8
+#define RX_HTHRESH 8
+#define RX_WTHRESH 0
+
+#define TX_RING_SIZE 512
+#define TX_FREE_THRESH 32
+#define TX_PTHRESH 32
+#define TX_HTHRESH 0
+#define TX_WTHRESH 0
+#define TX_RSBIT_THRESH 32
+#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\
+	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
+	ETH_TXQ_FLAGS_NOXSUMTCP)
+
+#define NUM_MBUFS ((64*1024)-1)
+#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_CACHE_SIZE 250
+#define BURST_SIZE 32
+#define RTE_RING_SZ 1024
+
+static volatile struct app_stats {
+	struct {
+		uint64_t rx_pkts;
+		uint64_t returned_pkts;
+		uint64_t enqueued_pkts;
+	} rx __rte_cache_aligned;
+
+	struct {
+		uint64_t dequeue_pkts;
+		uint64_t tx_pkts;
+	} tx __rte_cache_aligned;
+} app_stats;
+
+static const struct rte_eth_conf port_conf_default = {
+	.rxmode = {
+		.mq_mode = ETH_MQ_RX_RSS,
+		.max_rx_pkt_len = ETHER_MAX_LEN,
+		.split_hdr_size = 0,
+		.header_split   = 0, /**< Header Split disabled */
+		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
+		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
+		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
+		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
+	},
+	.txmode = {
+		.mq_mode = ETH_MQ_TX_NONE,
+	},
+	.lpbk_mode = 0,
+	.rx_adv_conf = {
+			.rss_conf = {
+				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
+					ETH_RSS_IPV4_TCP | ETH_RSS_IPV4_UDP |
+					ETH_RSS_IPV6_TCP | ETH_RSS_IPV6_UDP,
+			}
+	},
+};
+
+static const struct rte_eth_rxconf rx_conf_default = {
+	.rx_thresh = {
+		.pthresh = RX_PTHRESH,
+		.hthresh = RX_HTHRESH,
+		.wthresh = RX_WTHRESH,
+	},
+	.rx_free_thresh = RX_FREE_THRESH,
+	.rx_drop_en = 0,
+};
+
+static const struct rte_eth_txconf tx_conf_default = {
+	.tx_thresh = {
+		.pthresh = TX_PTHRESH,
+		.hthresh = TX_HTHRESH,
+		.wthresh = TX_WTHRESH,
+	},
+	.tx_free_thresh = TX_FREE_THRESH,
+	.tx_rs_thresh = TX_RSBIT_THRESH,
+	.txq_flags = TX_Q_FLAGS
+
+};
+
+struct output_buffer {
+	unsigned count;
+	struct rte_mbuf *mbufs[BURST_SIZE + 3];
+};
+
+/*
+ * Initialises a given port using global settings and with the rx buffers
+ * coming from the mbuf_pool passed as parameter
+ */
+static inline int
+port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+{
+	struct rte_eth_conf port_conf = port_conf_default;
+	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
+	int retval;
+	uint16_t q;
+
+	if (port >= rte_eth_dev_count())
+		return -1;
+
+	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
+	if (retval != 0)
+		return retval;
+
+	for (q = 0; q < rxRings; q++) {
+		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
+						rte_eth_dev_socket_id(port),
+						&rx_conf_default, mbuf_pool);
+		if (retval < 0)
+			return retval;
+	}
+
+	for (q = 0; q < txRings; q++) {
+		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
+						rte_eth_dev_socket_id(port),
+						&tx_conf_default);
+		if (retval < 0)
+			return retval;
+	}
+
+	retval  = rte_eth_dev_start(port);
+	if (retval < 0)
+		return retval;
+
+	struct rte_eth_link link;
+	rte_eth_link_get_nowait(port, &link);
+	if (!link.link_status) {
+		sleep(1);
+		rte_eth_link_get_nowait(port, &link);
+	}
+
+	if (!link.link_status) {
+		printf("Link down on port %"PRIu8"\n", port);
+		return 0;
+	}
+
+	struct ether_addr addr;
+	rte_eth_macaddr_get(port, &addr);
+	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
+			(unsigned)port,
+			addr.addr_bytes[0], addr.addr_bytes[1],
+			addr.addr_bytes[2], addr.addr_bytes[3],
+			addr.addr_bytes[4], addr.addr_bytes[5]);
+
+	rte_eth_promiscuous_enable(port);
+
+	return 0;
+}
+
+struct lcore_params {
+	unsigned worker_id;
+	struct rte_distributor *d;
+	struct rte_ring *r;
+};
+
+static __attribute__((noreturn)) void
+lcore_rx(struct lcore_params *p)
+{
+	struct rte_distributor *d = p->d;
+	struct rte_ring *r = p->r;
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const int socket_id = rte_socket_id();
+	uint8_t port;
+
+	for (port = 0; port < nb_ports; port++)
+		if (rte_eth_dev_socket_id(port) > 0 &&
+				rte_eth_dev_socket_id(port) != socket_id)
+			printf("WARNING, port %u is on remote NUMA node to "
+					"RX thread.\n\tPerformance will not "
+					"be optimal.\n", port);
+
+	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
+	port = 0;
+	for (;;) {
+		struct rte_mbuf *bufs[BURST_SIZE*2];
+		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
+				BURST_SIZE);
+		app_stats.rx.rx_pkts += nb_rx;
+
+		rte_distributor_process(d, bufs, nb_rx);
+		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
+				bufs, BURST_SIZE*2);
+		app_stats.rx.returned_pkts += nb_ret;
+		if (unlikely(nb_ret == 0))
+			continue;
+
+		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs, nb_ret);
+		app_stats.rx.enqueued_pkts += sent;
+		if (unlikely(sent < nb_ret)) {
+			printf("Packet loss due to full ring\n");
+			while (sent < nb_ret)
+				rte_pktmbuf_free(bufs[sent++]);
+		}
+		if (++port == nb_ports)
+			port = 0;
+	}
+}
+
+static inline void
+flush_one_port(struct output_buffer *outbuf, uint8_t outp)
+{
+	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
+			outbuf->count);
+	app_stats.tx.tx_pkts += nb_tx;
+
+	if (unlikely(nb_tx < outbuf->count)) {
+		printf("Packet loss with tx_burst\n");
+		do {
+			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
+		} while (++nb_tx < outbuf->count);
+	}
+	outbuf->count = 0;
+}
+
+static inline void
+flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
+{
+	uint8_t outp;
+	for (outp = 0; outp < nb_ports; outp++) {
+		if (tx_buffers[outp].count == 0)
+			continue;
+
+		flush_one_port(&tx_buffers[outp], outp);
+	}
+}
+
+static __attribute__((noreturn)) void
+lcore_tx(struct rte_ring *in_r)
+{
+	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const int socket_id = rte_socket_id();
+	uint8_t port;
+
+	for (port = 0; port < nb_ports; port++)
+		if (rte_eth_dev_socket_id(port) > 0 &&
+				rte_eth_dev_socket_id(port) != socket_id)
+			printf("WARNING, port %u is on remote NUMA node to "
+					"TX thread.\n\tPerformance will not "
+					"be optimal.\n", port);
+
+	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
+	for (;;) {
+		for (port = 0; port < nb_ports; port++) {
+			struct rte_mbuf *bufs[BURST_SIZE];
+			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
+					(void *)bufs, BURST_SIZE);
+			app_stats.tx.dequeue_pkts += nb_rx;
+
+			/* if we get no traffic, flush anything we have */
+			if (unlikely(nb_rx == 0)) {
+				flush_all_ports(tx_buffers, nb_ports);
+				continue;
+			}
+
+			/* for traffic we receive, queue it up for transmit */
+			uint16_t i;
+			_mm_prefetch(bufs[0], 0);
+			_mm_prefetch(bufs[1], 0);
+			_mm_prefetch(bufs[2], 0);
+			for (i = 0; i < nb_rx; i++) {
+				struct output_buffer *outbuf;
+				uint8_t outp;
+				_mm_prefetch(bufs[i + 3], 0);
+				/* workers should update in_port to hold the
+				 * output port value */
+				outp = bufs[i]->pkt.in_port;
+				outbuf = &tx_buffers[outp];
+				outbuf->mbufs[outbuf->count++] = bufs[i];
+				if (outbuf->count == BURST_SIZE)
+					flush_one_port(outbuf, outp);
+			}
+		}
+	}
+}
+
+
+static __attribute__((noreturn)) void
+lcore_worker(struct lcore_params *p)
+{
+	struct rte_distributor *d = p->d;
+	const unsigned id = p->worker_id;
+	/* for single port, xor_val will be zero so we won't modify the output
+	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
+	 */
+	const unsigned xor_val = (rte_eth_dev_count() > 1);
+	struct rte_mbuf *buf = NULL;
+
+	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
+	for (;;) {
+		buf = rte_distributor_get_pkt(d, id, buf);
+		buf->pkt.in_port ^= xor_val;
+	}
+}
+
+static void
+int_handler(int sig_num)
+{
+	struct rte_eth_stats eth_stats;
+	unsigned i;
+
+	printf("Exiting on signal %d\n", sig_num);
+
+	printf("\nRX thread stats:\n");
+	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
+	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
+	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
+
+	printf("\nTX thread stats:\n");
+	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
+	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
+
+	for (i = 0; i < rte_eth_dev_count(); i++) {
+		rte_eth_stats_get(i, &eth_stats);
+		printf("\nPort %u stats:\n", i);
+		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
+		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
+		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
+		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
+		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
+	}
+	exit(0);
+}
+
+/* Main function, does initialization and calls the per-lcore functions */
+int
+MAIN(int argc, char *argv[])
+{
+	struct rte_mempool *mbuf_pool;
+	struct rte_distributor *d;
+	struct rte_ring *output_ring;
+	unsigned lcore_id, worker_id = 0;
+	unsigned nb_ports;
+	uint8_t portid;
+
+	/* catch ctrl-c so we can print on exit */
+	signal(SIGINT, int_handler);
+
+	/* init EAL */
+	int ret = rte_eal_init(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+	argc -= ret;
+	argv += ret;
+
+	if (rte_lcore_count() < 3)
+		rte_exit(EXIT_FAILURE, "Error, This application needs at "
+				"least 3 logical cores to run:\n"
+				"1 lcore for packet RX and distribution\n"
+				"1 lcore for packet TX\n"
+				"and at least 1 lcore for worker threads\n");
+
+	if (rte_eal_pci_probe() != 0)
+		rte_exit(EXIT_FAILURE, "Error with PCI probing\n");
+
+	nb_ports = rte_eth_dev_count();
+	if (nb_ports == 0)
+		rte_exit(EXIT_FAILURE, "Error: no ethernet ports detected\n");
+	if (nb_ports != 1 && (nb_ports & 1))
+		rte_exit(EXIT_FAILURE, "Error: number of ports must be even, except "
+				"when using a single port\n");
+
+	mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
+				       MBUF_SIZE, MBUF_CACHE_SIZE,
+				       sizeof(struct rte_pktmbuf_pool_private),
+				       rte_pktmbuf_pool_init, NULL,
+				       rte_pktmbuf_init, NULL,
+				       rte_socket_id(), 0);
+	if (mbuf_pool == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+	/* initialize all ports */
+	for (portid = 0; portid < nb_ports; portid++)
+		if (port_init(portid, mbuf_pool) != 0)
+			rte_exit(EXIT_FAILURE, "Cannot initialize port %"PRIu8"\n",
+					portid);
+
+	d = rte_distributor_create("PKT_DIST", rte_socket_id(),
+			rte_lcore_count() - 2);
+	if (d == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create distributor\n");
+
+	/* scheduler ring is read only by the transmitter core, but written to
+	 * by multiple threads
+	 */
+	output_ring = rte_ring_create("Output_ring", RTE_RING_SZ,
+			rte_socket_id(), RING_F_SC_DEQ);
+	if (output_ring == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create output ring\n");
+
+	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+		if (worker_id == rte_lcore_count() - 2)
+			rte_eal_remote_launch((lcore_function_t *)lcore_tx,
+					output_ring, lcore_id);
+		else {
+			struct lcore_params *p =
+					rte_malloc(NULL, sizeof(*p), 0);
+			if (!p)
+				rte_panic("malloc failure\n");
+			*p = (struct lcore_params){worker_id, d, output_ring};
+			rte_eal_remote_launch((lcore_function_t *)lcore_worker,
+					p, lcore_id);
+		}
+		worker_id++;
+	}
+	/* call lcore_main on master core only */
+	struct lcore_params p = { 0, d, output_ring };
+	lcore_rx(&p);
+	return 0;
+}
+
diff --git a/examples/distributor_app/main.h b/examples/distributor_app/main.h
new file mode 100644
index 0000000..2682d15
--- /dev/null
+++ b/examples/distributor_app/main.h
@@ -0,0 +1,46 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char *argv[]);
+
+#endif /* ifndef _MAIN_H_ */
-- 
1.8.3.1

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [dpdk-dev] [PATCH 2/3] distributor_app: code review comments implementation
  2014-09-16 12:13 [dpdk-dev] [PATCH 0/3] distributor_app: new sample application for distributor library reshmapa
  2014-09-16 12:13 ` [dpdk-dev] [PATCH 1/3] distributor_app: new sample app reshmapa
@ 2014-09-16 12:13 ` reshmapa
  2014-09-16 12:13 ` [dpdk-dev] [PATCH 3/3] distributor_app: removed extra spaces reshmapa
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 38+ messages in thread
From: reshmapa @ 2014-09-16 12:13 UTC (permalink / raw)
  To: dev

From: Reshma Pattan <reshma.pattan@intel.com>

    * support provided for command-line option portmask.
    * removed -g option in make file
    * spacing adjustment in header files inclusion in main.c
    * removal of const +3 in delcarration of rte_mbuf inside
      output_buffer structure declaration

    Changes in V2:

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
---
 examples/distributor_app/Makefile |   2 +-
 examples/distributor_app/main.c   | 137 ++++++++++++++++++++++++++++++++++++--
 2 files changed, 133 insertions(+), 6 deletions(-)

diff --git a/examples/distributor_app/Makefile b/examples/distributor_app/Makefile
index d46746e..394785d 100644
--- a/examples/distributor_app/Makefile
+++ b/examples/distributor_app/Makefile
@@ -52,6 +52,6 @@ ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
 CFLAGS_main.o += -Wno-return-type
 endif
 
-EXTRA_CFLAGS += -O3 -g -Wfatal-errors
+EXTRA_CFLAGS += -O3 -Wfatal-errors
 
 include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/distributor_app/main.c b/examples/distributor_app/main.c
index 45d5bc1..fab8199 100644
--- a/examples/distributor_app/main.c
+++ b/examples/distributor_app/main.c
@@ -35,6 +35,7 @@
 #include <inttypes.h>
 #include <unistd.h>
 #include <signal.h>
+#include <getopt.h>
 
 #include <rte_eal.h>
 #include <rte_ethdev.h>
@@ -42,6 +43,7 @@
 #include <rte_malloc.h>
 #include <rte_debug.h>
 #include <rte_distributor.h>
+
 #include "main.h"
 
 #define RX_RING_SIZE 256
@@ -66,6 +68,9 @@
 #define BURST_SIZE 32
 #define RTE_RING_SZ 1024
 
+/* mask of enabled ports */
+static uint32_t enabled_port_mask = 0;
+
 static volatile struct app_stats {
 	struct {
 		uint64_t rx_pkts;
@@ -127,7 +132,7 @@ static const struct rte_eth_txconf tx_conf_default = {
 
 struct output_buffer {
 	unsigned count;
-	struct rte_mbuf *mbufs[BURST_SIZE + 3];
+	struct rte_mbuf *mbufs[BURST_SIZE];
 };
 
 /*
@@ -210,16 +215,27 @@ lcore_rx(struct lcore_params *p)
 	const int socket_id = rte_socket_id();
 	uint8_t port;
 
-	for (port = 0; port < nb_ports; port++)
+	for (port = 0; port < nb_ports; port++){
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0){
+			continue;
+		}
 		if (rte_eth_dev_socket_id(port) > 0 &&
 				rte_eth_dev_socket_id(port) != socket_id)
 			printf("WARNING, port %u is on remote NUMA node to "
 					"RX thread.\n\tPerformance will not "
 					"be optimal.\n", port);
+	}
 
 	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
 	port = 0;
 	for (;;) {
+		/* skip ports that are not enabled */ 
+		if ((enabled_port_mask & (1 << port)) == 0){
+			if (++port == nb_ports)
+				port = 0;
+			continue;
+		}
 		struct rte_mbuf *bufs[BURST_SIZE*2];
 		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
 				BURST_SIZE);
@@ -265,6 +281,11 @@ flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
 {
 	uint8_t outp;
 	for (outp = 0; outp < nb_ports; outp++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << outp)) == 0){
+			continue; 
+		}
+
 		if (tx_buffers[outp].count == 0)
 			continue;
 
@@ -280,16 +301,25 @@ lcore_tx(struct rte_ring *in_r)
 	const int socket_id = rte_socket_id();
 	uint8_t port;
 
-	for (port = 0; port < nb_ports; port++)
+	for (port = 0; port < nb_ports; port++){
+		/* skip ports that are not enabled */ 
+		if ((enabled_port_mask & (1 << port)) == 0){
+			continue;
+		}
 		if (rte_eth_dev_socket_id(port) > 0 &&
 				rte_eth_dev_socket_id(port) != socket_id)
 			printf("WARNING, port %u is on remote NUMA node to "
 					"TX thread.\n\tPerformance will not "
 					"be optimal.\n", port);
+	}
 
 	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
 	for (;;) {
 		for (port = 0; port < nb_ports; port++) {
+			/* skip ports that are not enabled */ 
+			if ((enabled_port_mask & (1 << port)) == 0){
+				continue;
+			}
 			struct rte_mbuf *bufs[BURST_SIZE];
 			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
 					(void *)bufs, BURST_SIZE);
@@ -313,6 +343,10 @@ lcore_tx(struct rte_ring *in_r)
 				/* workers should update in_port to hold the
 				 * output port value */
 				outp = bufs[i]->pkt.in_port;
+				/* skip ports that are not enabled */
+				if ((enabled_port_mask & (1 << outp)) == 0){
+					continue;
+				}
 				outbuf = &tx_buffers[outp];
 				outbuf->mbufs[outbuf->count++] = bufs[i];
 				if (outbuf->count == BURST_SIZE)
@@ -370,6 +404,77 @@ int_handler(int sig_num)
 	exit(0);
 }
 
+/* display usage */
+static void
+print_usage(const char *prgname)
+{
+        printf("%s [EAL options] -- -p PORTMASK\n"
+               "  -p PORTMASK: hexadecimal bitmask of ports to configure\n",
+               prgname);
+}
+
+static int
+parse_portmask(const char *portmask)
+{
+        char *end = NULL;
+        unsigned long pm;
+
+        /* parse hexadecimal string */
+        pm = strtoul(portmask, &end, 16);
+        if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+                return -1;
+
+        if (pm == 0)
+                return -1;
+
+        return pm;
+}
+
+/* Parse the argument given in the command line of the application */
+static int 
+parse_args(int argc, char **argv)
+{
+        int opt;
+        char **argvopt;
+        int option_index;
+        char *prgname = argv[0];
+        static struct option lgopts[] = { 
+                {NULL, 0, 0, 0}
+        };  
+
+        argvopt = argv;
+
+        while ((opt = getopt_long(argc, argvopt, "p:",
+                                  lgopts, &option_index)) != EOF) {
+
+                switch (opt) {
+                /* portmask */
+                case 'p':
+                        enabled_port_mask = parse_portmask(optarg);
+                        if (enabled_port_mask == 0) {
+                                printf("invalid portmask\n");
+                                print_usage(prgname);
+                                return -1; 
+                        }   
+                        break;
+		
+		default:
+			print_usage(prgname);
+			return -1;
+		}
+        }
+	
+	if (optind <= 1) {
+		print_usage(prgname);
+		return -1;
+	}
+
+	argv[optind-1] = prgname;
+
+        optind = 0; /* reset getopt lib */
+        return 0;
+}
+
 /* Main function, does initialization and calls the per-lcore functions */
 int
 MAIN(int argc, char *argv[])
@@ -380,6 +485,7 @@ MAIN(int argc, char *argv[])
 	unsigned lcore_id, worker_id = 0;
 	unsigned nb_ports;
 	uint8_t portid;
+	uint8_t nb_ports_available;
 
 	/* catch ctrl-c so we can print on exit */
 	signal(SIGINT, int_handler);
@@ -391,6 +497,11 @@ MAIN(int argc, char *argv[])
 	argc -= ret;
 	argv += ret;
 
+        /* parse application arguments (after the EAL ones) */
+        ret = parse_args(argc, argv);
+        if (ret < 0) 
+                rte_exit(EXIT_FAILURE, "Invalid distributor parameters\n");
+
 	if (rte_lcore_count() < 3)
 		rte_exit(EXIT_FAILURE, "Error, This application needs at "
 				"least 3 logical cores to run:\n"
@@ -417,11 +528,28 @@ MAIN(int argc, char *argv[])
 	if (mbuf_pool == NULL)
 		rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
 
+	nb_ports_available = nb_ports;
+
 	/* initialize all ports */
-	for (portid = 0; portid < nb_ports; portid++)
+	for (portid = 0; portid < nb_ports; portid++){
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << portid)) == 0){
+			printf("\nSkipping disabled port %d\n", portid);
+			nb_ports_available--;
+			continue;
+		}
+		/* init port */
+                printf("Initializing port %u... done\n", (unsigned) portid);
+
 		if (port_init(portid, mbuf_pool) != 0)
 			rte_exit(EXIT_FAILURE, "Cannot initialize port %"PRIu8"\n",
 					portid);
+	}
+
+        if (!nb_ports_available) {
+                rte_exit(EXIT_FAILURE,
+                        "All available ports are disabled. Please set portmask.\n");
+        }   
 
 	d = rte_distributor_create("PKT_DIST", rte_socket_id(),
 			rte_lcore_count() - 2);
@@ -456,4 +584,3 @@ MAIN(int argc, char *argv[])
 	lcore_rx(&p);
 	return 0;
 }
-
-- 
1.8.3.1

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [dpdk-dev]  [PATCH 3/3] distributor_app: removed extra spaces
  2014-09-16 12:13 [dpdk-dev] [PATCH 0/3] distributor_app: new sample application for distributor library reshmapa
  2014-09-16 12:13 ` [dpdk-dev] [PATCH 1/3] distributor_app: new sample app reshmapa
  2014-09-16 12:13 ` [dpdk-dev] [PATCH 2/3] distributor_app: code review comments implementation reshmapa
@ 2014-09-16 12:13 ` reshmapa
  2014-09-23 12:55 ` [dpdk-dev] [PATCH 0/3] distributor_app: new sample application for distributor library Bruce Richardson
  2014-09-24 14:16 ` [dpdk-dev] [PATCH v2] distributor_app: new sample app reshmapa
  4 siblings, 0 replies; 38+ messages in thread
From: reshmapa @ 2014-09-16 12:13 UTC (permalink / raw)
  To: dev

From: Reshma Pattan <reshma.pattan@intel.com>

Changes in V2:

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
---
 examples/distributor_app/main.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/examples/distributor_app/main.c b/examples/distributor_app/main.c
index fab8199..b064a3a 100644
--- a/examples/distributor_app/main.c
+++ b/examples/distributor_app/main.c
@@ -230,7 +230,7 @@ lcore_rx(struct lcore_params *p)
 	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
 	port = 0;
 	for (;;) {
-		/* skip ports that are not enabled */ 
+		/* skip ports that are not enabled */
 		if ((enabled_port_mask & (1 << port)) == 0){
 			if (++port == nb_ports)
 				port = 0;
@@ -283,7 +283,7 @@ flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
 	for (outp = 0; outp < nb_ports; outp++) {
 		/* skip ports that are not enabled */
 		if ((enabled_port_mask & (1 << outp)) == 0){
-			continue; 
+			continue;
 		}
 
 		if (tx_buffers[outp].count == 0)
@@ -302,7 +302,7 @@ lcore_tx(struct rte_ring *in_r)
 	uint8_t port;
 
 	for (port = 0; port < nb_ports; port++){
-		/* skip ports that are not enabled */ 
+		/* skip ports that are not enabled */
 		if ((enabled_port_mask & (1 << port)) == 0){
 			continue;
 		}
@@ -316,7 +316,7 @@ lcore_tx(struct rte_ring *in_r)
 	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
 	for (;;) {
 		for (port = 0; port < nb_ports; port++) {
-			/* skip ports that are not enabled */ 
+			/* skip ports that are not enabled */
 			if ((enabled_port_mask & (1 << port)) == 0){
 				continue;
 			}
@@ -431,16 +431,16 @@ parse_portmask(const char *portmask)
 }
 
 /* Parse the argument given in the command line of the application */
-static int 
+static int
 parse_args(int argc, char **argv)
 {
         int opt;
         char **argvopt;
         int option_index;
         char *prgname = argv[0];
-        static struct option lgopts[] = { 
+        static struct option lgopts[] = {
                 {NULL, 0, 0, 0}
-        };  
+        };
 
         argvopt = argv;
 
@@ -454,8 +454,8 @@ parse_args(int argc, char **argv)
                         if (enabled_port_mask == 0) {
                                 printf("invalid portmask\n");
                                 print_usage(prgname);
-                                return -1; 
-                        }   
+                                return -1;
+                        }
                         break;
 		
 		default:
@@ -499,7 +499,7 @@ MAIN(int argc, char *argv[])
 
         /* parse application arguments (after the EAL ones) */
         ret = parse_args(argc, argv);
-        if (ret < 0) 
+        if (ret < 0)
                 rte_exit(EXIT_FAILURE, "Invalid distributor parameters\n");
 
 	if (rte_lcore_count() < 3)
@@ -549,7 +549,7 @@ MAIN(int argc, char *argv[])
         if (!nb_ports_available) {
                 rte_exit(EXIT_FAILURE,
                         "All available ports are disabled. Please set portmask.\n");
-        }   
+        }
 
 	d = rte_distributor_create("PKT_DIST", rte_socket_id(),
 			rte_lcore_count() - 2);
-- 
1.8.3.1

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH 0/3] distributor_app: new sample application for distributor library
  2014-09-16 12:13 [dpdk-dev] [PATCH 0/3] distributor_app: new sample application for distributor library reshmapa
                   ` (2 preceding siblings ...)
  2014-09-16 12:13 ` [dpdk-dev] [PATCH 3/3] distributor_app: removed extra spaces reshmapa
@ 2014-09-23 12:55 ` Bruce Richardson
  2014-09-24 14:16 ` [dpdk-dev] [PATCH v2] distributor_app: new sample app reshmapa
  4 siblings, 0 replies; 38+ messages in thread
From: Bruce Richardson @ 2014-09-23 12:55 UTC (permalink / raw)
  To: reshmapa; +Cc: dev

On Tue, Sep 16, 2014 at 01:13:24PM +0100, reshmapa wrote:
> From: Reshma Pattan <reshma.pattan@intel.com>
> 
> A new sample app that shows the usage of the distributor library. This
> app works as follows:
> 
> *An RX thread runs which pulls packets from each ethernet port in turn
> and passes those packets to worker using a distributor component.
> 
> *The workers take the packets in turn, and determine the output port
> for those packets using basic l2forwarding doing an xor on the source
> port id.
> 
> *The RX thread takes the returned packets from the workers and enqueue
> those packets into an rte_ring structure.
> 
> *A TX thread pulls the packets off the rte_ring structure and then
> sends each packet out the output port specified previously by the worker
> 
> Bruce Richardson (1):
>   distributor_app: new sample app
> 
> Reshma Pattan (2):
>   distributor_app: code review comments implementation
>   distributor_app: removed extra spaces
> 

Since this is just a sample app and the second two patches are just minor 
adjustments to it, I suggest that this be resubmitted as a single patch 
instead of a set. That should also fix the whitespace warnings one gets when 
using "git am" to apply the set.

Please also check the indentation used in the file. I see in a number of 
places that spaces are used instead of tabs for indentation. Running 
checkpatch.pl on the patch before submission should help catch these issues.

Regards,
/Bruce

>  examples/Makefile                 |   1 +
>  examples/distributor_app/Makefile |  57 ++++
>  examples/distributor_app/main.c   | 586 ++++++++++++++++++++++++++++++++++++++
>  examples/distributor_app/main.h   |  46 +++
>  4 files changed, 690 insertions(+)
>  create mode 100644 examples/distributor_app/Makefile
>  create mode 100644 examples/distributor_app/main.c
>  create mode 100644 examples/distributor_app/main.h
> 
> -- 
> 1.8.3.1
> 

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [dpdk-dev] [PATCH v2] distributor_app: new sample app
  2014-09-16 12:13 [dpdk-dev] [PATCH 0/3] distributor_app: new sample application for distributor library reshmapa
                   ` (3 preceding siblings ...)
  2014-09-23 12:55 ` [dpdk-dev] [PATCH 0/3] distributor_app: new sample application for distributor library Bruce Richardson
@ 2014-09-24 14:16 ` reshmapa
  2014-09-26 15:11   ` De Lara Guarch, Pablo
  2014-09-30 10:39   ` [dpdk-dev] [PATCH v3] " reshmapa
  4 siblings, 2 replies; 38+ messages in thread
From: reshmapa @ 2014-09-24 14:16 UTC (permalink / raw)
  To: dev

From: Reshma Pattan <reshma.pattan@intel.com>

A new sample app that shows the usage of the distributor library. This
app works as follows:

* An RX thread runs which pulls packets from each ethernet port in turn
  and passes those packets to worker using a distributor component.
* The workers take the packets in turn, and determine the output port
  for those packets using basic l2forwarding doing an xor on the source
  port id.
* The RX thread takes the returned packets from the workers and enqueue
  those packets into an rte_ring structure.
* A TX thread pulls the packets off the rte_ring structure and then
  sends each packet out the output port specified previously by the worker
* Command-line option support provided only for portmask.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
---
 examples/Makefile                 |   1 +
 examples/distributor_app/Makefile |  57 ++++
 examples/distributor_app/main.c   | 585 ++++++++++++++++++++++++++++++++++++++
 examples/distributor_app/main.h   |  46 +++
 4 files changed, 689 insertions(+)
 create mode 100644 examples/distributor_app/Makefile
 create mode 100644 examples/distributor_app/main.c
 create mode 100644 examples/distributor_app/main.h

diff --git a/examples/Makefile b/examples/Makefile
index 6245f83..2ba82b0 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -66,5 +66,6 @@ DIRS-y += vhost
 DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
 DIRS-y += vmdq
 DIRS-y += vmdq_dcb
+DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
 
 include $(RTE_SDK)/mk/rte.extsubdir.mk
diff --git a/examples/distributor_app/Makefile b/examples/distributor_app/Makefile
new file mode 100644
index 0000000..394785d
--- /dev/null
+++ b/examples/distributor_app/Makefile
@@ -0,0 +1,57 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-default-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = distributor_app
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+EXTRA_CFLAGS += -O3 -Wfatal-errors
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/distributor_app/main.c b/examples/distributor_app/main.c
new file mode 100644
index 0000000..628810a
--- /dev/null
+++ b/examples/distributor_app/main.c
@@ -0,0 +1,585 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <signal.h>
+#include <getopt.h>
+
+#include <rte_eal.h>
+#include <rte_ethdev.h>
+#include <rte_cycles.h>
+#include <rte_malloc.h>
+#include <rte_debug.h>
+#include <rte_distributor.h>
+
+#include "main.h"
+
+#define RX_RING_SIZE 256
+#define RX_FREE_THRESH 32
+#define RX_PTHRESH 8
+#define RX_HTHRESH 8
+#define RX_WTHRESH 0
+
+#define TX_RING_SIZE 512
+#define TX_FREE_THRESH 32
+#define TX_PTHRESH 32
+#define TX_HTHRESH 0
+#define TX_WTHRESH 0
+#define TX_RSBIT_THRESH 32
+#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\
+	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
+	ETH_TXQ_FLAGS_NOXSUMTCP)
+
+#define NUM_MBUFS ((64*1024)-1)
+#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_CACHE_SIZE 250
+#define BURST_SIZE 32
+#define RTE_RING_SZ 1024
+
+/* mask of enabled ports */
+static uint32_t enabled_port_mask = 0;
+
+static volatile struct app_stats {
+	struct {
+		uint64_t rx_pkts;
+		uint64_t returned_pkts;
+		uint64_t enqueued_pkts;
+	} rx __rte_cache_aligned;
+
+	struct {
+		uint64_t dequeue_pkts;
+		uint64_t tx_pkts;
+	} tx __rte_cache_aligned;
+} app_stats;
+
+static const struct rte_eth_conf port_conf_default = {
+	.rxmode = {
+		.mq_mode = ETH_MQ_RX_RSS,
+		.max_rx_pkt_len = ETHER_MAX_LEN,
+		.split_hdr_size = 0,
+		.header_split   = 0, /**< Header Split disabled */
+		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
+		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
+		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
+		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
+	},
+	.txmode = {
+		.mq_mode = ETH_MQ_TX_NONE,
+	},
+	.lpbk_mode = 0,
+	.rx_adv_conf = {
+			.rss_conf = {
+				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
+					ETH_RSS_IPV4_TCP | ETH_RSS_IPV4_UDP |
+					ETH_RSS_IPV6_TCP | ETH_RSS_IPV6_UDP,
+			}
+	},
+};
+
+static const struct rte_eth_rxconf rx_conf_default = {
+	.rx_thresh = {
+		.pthresh = RX_PTHRESH,
+		.hthresh = RX_HTHRESH,
+		.wthresh = RX_WTHRESH,
+	},
+	.rx_free_thresh = RX_FREE_THRESH,
+	.rx_drop_en = 0,
+};
+
+static const struct rte_eth_txconf tx_conf_default = {
+	.tx_thresh = {
+		.pthresh = TX_PTHRESH,
+		.hthresh = TX_HTHRESH,
+		.wthresh = TX_WTHRESH,
+	},
+	.tx_free_thresh = TX_FREE_THRESH,
+	.tx_rs_thresh = TX_RSBIT_THRESH,
+	.txq_flags = TX_Q_FLAGS
+
+};
+
+struct output_buffer {
+	unsigned count;
+	struct rte_mbuf *mbufs[BURST_SIZE];
+};
+
+/*
+ * Initialises a given port using global settings and with the rx buffers
+ * coming from the mbuf_pool passed as parameter
+ */
+static inline int
+port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+{
+	struct rte_eth_conf port_conf = port_conf_default;
+	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
+	int retval;
+	uint16_t q;
+
+	if (port >= rte_eth_dev_count())
+		return -1;
+
+	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
+	if (retval != 0)
+		return retval;
+
+	for (q = 0; q < rxRings; q++) {
+		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
+						rte_eth_dev_socket_id(port),
+						&rx_conf_default, mbuf_pool);
+		if (retval < 0)
+			return retval;
+	}
+
+	for (q = 0; q < txRings; q++) {
+		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
+						rte_eth_dev_socket_id(port),
+						&tx_conf_default);
+		if (retval < 0)
+			return retval;
+	}
+
+	retval  = rte_eth_dev_start(port);
+	if (retval < 0)
+		return retval;
+
+	struct rte_eth_link link;
+	rte_eth_link_get_nowait(port, &link);
+	if (!link.link_status) {
+		sleep(1);
+		rte_eth_link_get_nowait(port, &link);
+	}
+
+	if (!link.link_status) {
+		printf("Link down on port %"PRIu8"\n", port);
+		return 0;
+	}
+
+	struct ether_addr addr;
+	rte_eth_macaddr_get(port, &addr);
+	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
+			(unsigned)port,
+			addr.addr_bytes[0], addr.addr_bytes[1],
+			addr.addr_bytes[2], addr.addr_bytes[3],
+			addr.addr_bytes[4], addr.addr_bytes[5]);
+
+	rte_eth_promiscuous_enable(port);
+
+	return 0;
+}
+
+struct lcore_params {
+	unsigned worker_id;
+	struct rte_distributor *d;
+	struct rte_ring *r;
+};
+
+static __attribute__((noreturn)) void
+lcore_rx(struct lcore_params *p)
+{
+	struct rte_distributor *d = p->d;
+	struct rte_ring *r = p->r;
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const int socket_id = rte_socket_id();
+	uint8_t port;
+
+	for (port = 0; port < nb_ports; port++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0)
+			continue;
+
+		if (rte_eth_dev_socket_id(port) > 0 &&
+				rte_eth_dev_socket_id(port) != socket_id)
+			printf("WARNING, port %u is on remote NUMA node to "
+					"RX thread.\n\tPerformance will not "
+					"be optimal.\n", port);
+	}
+
+	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
+	port = 0;
+	for (;;) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0) {
+			if (++port == nb_ports)
+				port = 0;
+			continue;
+		}
+		struct rte_mbuf *bufs[BURST_SIZE*2];
+		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
+				BURST_SIZE);
+		app_stats.rx.rx_pkts += nb_rx;
+
+		rte_distributor_process(d, bufs, nb_rx);
+		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
+				bufs, BURST_SIZE*2);
+		app_stats.rx.returned_pkts += nb_ret;
+		if (unlikely(nb_ret == 0))
+			continue;
+
+		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs, nb_ret);
+		app_stats.rx.enqueued_pkts += sent;
+		if (unlikely(sent < nb_ret)) {
+			printf("Packet loss due to full ring\n");
+			while (sent < nb_ret)
+				rte_pktmbuf_free(bufs[sent++]);
+		}
+		if (++port == nb_ports)
+			port = 0;
+	}
+}
+
+static inline void
+flush_one_port(struct output_buffer *outbuf, uint8_t outp)
+{
+	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
+			outbuf->count);
+	app_stats.tx.tx_pkts += nb_tx;
+
+	if (unlikely(nb_tx < outbuf->count)) {
+		printf("Packet loss with tx_burst\n");
+		do {
+			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
+		} while (++nb_tx < outbuf->count);
+	}
+	outbuf->count = 0;
+}
+
+static inline void
+flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
+{
+	uint8_t outp;
+	for (outp = 0; outp < nb_ports; outp++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << outp)) == 0)
+			continue;
+
+		if (tx_buffers[outp].count == 0)
+			continue;
+
+		flush_one_port(&tx_buffers[outp], outp);
+	}
+}
+
+static __attribute__((noreturn)) void
+lcore_tx(struct rte_ring *in_r)
+{
+	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const int socket_id = rte_socket_id();
+	uint8_t port;
+
+	for (port = 0; port < nb_ports; port++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0)
+			continue;
+
+		if (rte_eth_dev_socket_id(port) > 0 &&
+				rte_eth_dev_socket_id(port) != socket_id)
+			printf("WARNING, port %u is on remote NUMA node to "
+					"TX thread.\n\tPerformance will not "
+					"be optimal.\n", port);
+	}
+
+	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
+	for (;;) {
+		for (port = 0; port < nb_ports; port++) {
+			/* skip ports that are not enabled */
+			if ((enabled_port_mask & (1 << port)) == 0)
+				continue;
+
+			struct rte_mbuf *bufs[BURST_SIZE];
+			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
+					(void *)bufs, BURST_SIZE);
+			app_stats.tx.dequeue_pkts += nb_rx;
+
+			/* if we get no traffic, flush anything we have */
+			if (unlikely(nb_rx == 0)) {
+				flush_all_ports(tx_buffers, nb_ports);
+				continue;
+			}
+
+			/* for traffic we receive, queue it up for transmit */
+			uint16_t i;
+			_mm_prefetch(bufs[0], 0);
+			_mm_prefetch(bufs[1], 0);
+			_mm_prefetch(bufs[2], 0);
+			for (i = 0; i < nb_rx; i++) {
+				struct output_buffer *outbuf;
+				uint8_t outp;
+				_mm_prefetch(bufs[i + 3], 0);
+				/* workers should update in_port to hold the
+				 * output port value */
+				outp = bufs[i]->port;
+				/* skip ports that are not enabled */
+				if ((enabled_port_mask & (1 << outp)) == 0)
+					continue;
+
+				outbuf = &tx_buffers[outp];
+				outbuf->mbufs[outbuf->count++] = bufs[i];
+				if (outbuf->count == BURST_SIZE)
+					flush_one_port(outbuf, outp);
+			}
+		}
+	}
+}
+
+
+static __attribute__((noreturn)) void
+lcore_worker(struct lcore_params *p)
+{
+	struct rte_distributor *d = p->d;
+	const unsigned id = p->worker_id;
+	/* for single port, xor_val will be zero so we won't modify the output
+	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
+	 */
+	const unsigned xor_val = (rte_eth_dev_count() > 1);
+	struct rte_mbuf *buf = NULL;
+
+	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
+	for (;;) {
+		buf = rte_distributor_get_pkt(d, id, buf);
+		buf->port ^= xor_val;
+	}
+}
+
+static void
+int_handler(int sig_num)
+{
+	struct rte_eth_stats eth_stats;
+	unsigned i;
+
+	printf("Exiting on signal %d\n", sig_num);
+
+	printf("\nRX thread stats:\n");
+	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
+	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
+	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
+
+	printf("\nTX thread stats:\n");
+	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
+	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
+
+	for (i = 0; i < rte_eth_dev_count(); i++) {
+		rte_eth_stats_get(i, &eth_stats);
+		printf("\nPort %u stats:\n", i);
+		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
+		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
+		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
+		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
+		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
+	}
+	exit(0);
+}
+
+/* display usage */
+static void
+print_usage(const char *prgname)
+{
+	printf("%s [EAL options] -- -p PORTMASK\n"
+			"  -p PORTMASK: hexadecimal bitmask of ports to configure\n",
+			prgname);
+}
+
+static int
+parse_portmask(const char *portmask)
+{
+	char *end = NULL;
+	unsigned long pm;
+
+	/* parse hexadecimal string */
+	pm = strtoul(portmask, &end, 16);
+	if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+		return -1;
+
+	if (pm == 0)
+		return -1;
+
+	return pm;
+}
+
+/* Parse the argument given in the command line of the application */
+static int
+parse_args(int argc, char **argv)
+{
+	int opt;
+	char **argvopt;
+	int option_index;
+	char *prgname = argv[0];
+	static struct option lgopts[] = {
+		{NULL, 0, 0, 0}
+	};
+
+	argvopt = argv;
+
+	while ((opt = getopt_long(argc, argvopt, "p:",
+			lgopts, &option_index)) != EOF) {
+
+		switch (opt) {
+			/* portmask */
+			case 'p':
+				enabled_port_mask = parse_portmask(optarg);
+				if (enabled_port_mask == 0) {
+					printf("invalid portmask\n");
+					print_usage(prgname);
+					return -1;
+				}
+				break;
+
+			default:
+				print_usage(prgname);
+				return -1;
+		}
+	}
+
+if (optind <= 1) {
+	print_usage(prgname);
+	return -1;
+}
+
+	argv[optind-1] = prgname;
+
+	optind = 0; /* reset getopt lib */
+	return 0;
+}
+
+/* Main function, does initialization and calls the per-lcore functions */
+int
+MAIN(int argc, char *argv[])
+{
+	struct rte_mempool *mbuf_pool;
+	struct rte_distributor *d;
+	struct rte_ring *output_ring;
+	unsigned lcore_id, worker_id = 0;
+	unsigned nb_ports;
+	uint8_t portid;
+	uint8_t nb_ports_available;
+
+	/* catch ctrl-c so we can print on exit */
+	signal(SIGINT, int_handler);
+
+	/* init EAL */
+	int ret = rte_eal_init(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+	argc -= ret;
+	argv += ret;
+
+	/* parse application arguments (after the EAL ones) */
+	ret = parse_args(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "Invalid distributor parameters\n");
+
+	if (rte_lcore_count() < 3)
+		rte_exit(EXIT_FAILURE, "Error, This application needs at "
+				"least 3 logical cores to run:\n"
+				"1 lcore for packet RX and distribution\n"
+				"1 lcore for packet TX\n"
+				"and at least 1 lcore for worker threads\n");
+
+	if (rte_eal_pci_probe() != 0)
+		rte_exit(EXIT_FAILURE, "Error with PCI probing\n");
+
+	nb_ports = rte_eth_dev_count();
+	if (nb_ports == 0)
+		rte_exit(EXIT_FAILURE, "Error: no ethernet ports detected\n");
+	if (nb_ports != 1 && (nb_ports & 1))
+		rte_exit(EXIT_FAILURE, "Error: number of ports must be even, except "
+				"when using a single port\n");
+
+	mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
+			MBUF_SIZE, MBUF_CACHE_SIZE,
+			sizeof(struct rte_pktmbuf_pool_private),
+			rte_pktmbuf_pool_init, NULL,
+			rte_pktmbuf_init, NULL,
+			rte_socket_id(), 0);
+	if (mbuf_pool == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+	nb_ports_available = nb_ports;
+
+	/* initialize all ports */
+	for (portid = 0; portid < nb_ports; portid++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << portid)) == 0) {
+			printf("\nSkipping disabled port %d\n", portid);
+			nb_ports_available--;
+			continue;
+		}
+		/* init port */
+		printf("Initializing port %u... done\n", (unsigned) portid);
+
+		if (port_init(portid, mbuf_pool) != 0)
+			rte_exit(EXIT_FAILURE, "Cannot initialize port %"PRIu8"\n",
+					portid);
+	}
+
+	if (!nb_ports_available) {
+		rte_exit(EXIT_FAILURE,
+				"All available ports are disabled. Please set portmask.\n");
+	}
+
+	d = rte_distributor_create("PKT_DIST", rte_socket_id(),
+			rte_lcore_count() - 2);
+	if (d == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create distributor\n");
+
+	/* scheduler ring is read only by the transmitter core, but written to
+	 * by multiple threads
+	 */
+	output_ring = rte_ring_create("Output_ring", RTE_RING_SZ,
+			rte_socket_id(), RING_F_SC_DEQ);
+	if (output_ring == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create output ring\n");
+
+	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+		if (worker_id == rte_lcore_count() - 2)
+			rte_eal_remote_launch((lcore_function_t *)lcore_tx,
+					output_ring, lcore_id);
+		else {
+			struct lcore_params *p =
+					rte_malloc(NULL, sizeof(*p), 0);
+			if (!p)
+				rte_panic("malloc failure\n");
+			*p = (struct lcore_params){worker_id, d, output_ring};
+			rte_eal_remote_launch((lcore_function_t *)lcore_worker,
+					p, lcore_id);
+		}
+		worker_id++;
+	}
+	/* call lcore_main on master core only */
+	struct lcore_params p = { 0, d, output_ring };
+	lcore_rx(&p);
+	return 0;
+}
diff --git a/examples/distributor_app/main.h b/examples/distributor_app/main.h
new file mode 100644
index 0000000..2682d15
--- /dev/null
+++ b/examples/distributor_app/main.h
@@ -0,0 +1,46 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char *argv[]);
+
+#endif /* ifndef _MAIN_H_ */
-- 
1.9.3

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
  2014-09-24 14:16 ` [dpdk-dev] [PATCH v2] distributor_app: new sample app reshmapa
@ 2014-09-26 15:11   ` De Lara Guarch, Pablo
  2014-09-26 15:51     ` Ananyev, Konstantin
  2014-09-30 10:39   ` [dpdk-dev] [PATCH v3] " reshmapa
  1 sibling, 1 reply; 38+ messages in thread
From: De Lara Guarch, Pablo @ 2014-09-26 15:11 UTC (permalink / raw)
  To: Pattan, Reshma, dev

Hi,

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of reshmapa
> Sent: Wednesday, September 24, 2014 3:17 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> 
> From: Reshma Pattan <reshma.pattan@intel.com>
> 
> A new sample app that shows the usage of the distributor library. This
> app works as follows:
> 
> * An RX thread runs which pulls packets from each ethernet port in turn
>   and passes those packets to worker using a distributor component.
> * The workers take the packets in turn, and determine the output port
>   for those packets using basic l2forwarding doing an xor on the source
>   port id.
> * The RX thread takes the returned packets from the workers and enqueue
>   those packets into an rte_ring structure.
> * A TX thread pulls the packets off the rte_ring structure and then
>   sends each packet out the output port specified previously by the worker
> * Command-line option support provided only for portmask.
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
> ---
>  examples/Makefile                 |   1 +
>  examples/distributor_app/Makefile |  57 ++++
>  examples/distributor_app/main.c   | 585
> ++++++++++++++++++++++++++++++++++++++
>  examples/distributor_app/main.h   |  46 +++
>  4 files changed, 689 insertions(+)
>  create mode 100644 examples/distributor_app/Makefile
>  create mode 100644 examples/distributor_app/main.c
>  create mode 100644 examples/distributor_app/main.h
> 
> diff --git a/examples/Makefile b/examples/Makefile
> index 6245f83..2ba82b0 100644
> --- a/examples/Makefile
> +++ b/examples/Makefile
> @@ -66,5 +66,6 @@ DIRS-y += vhost
>  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
>  DIRS-y += vmdq
>  DIRS-y += vmdq_dcb
> +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> 
>  include $(RTE_SDK)/mk/rte.extsubdir.mk
> diff --git a/examples/distributor_app/Makefile
> b/examples/distributor_app/Makefile
> new file mode 100644
> index 0000000..394785d
> --- /dev/null
> +++ b/examples/distributor_app/Makefile
> @@ -0,0 +1,57 @@
> +#   BSD LICENSE
> +#
> +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> +#   All rights reserved.
> +#
> +#   Redistribution and use in source and binary forms, with or without
> +#   modification, are permitted provided that the following conditions
> +#   are met:
> +#
> +#     * Redistributions of source code must retain the above copyright
> +#       notice, this list of conditions and the following disclaimer.
> +#     * Redistributions in binary form must reproduce the above copyright
> +#       notice, this list of conditions and the following disclaimer in
> +#       the documentation and/or other materials provided with the
> +#       distribution.
> +#     * Neither the name of Intel Corporation nor the names of its
> +#       contributors may be used to endorse or promote products derived
> +#       from this software without specific prior written permission.
> +#
> +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> +
> +ifeq ($(RTE_SDK),)
> +$(error "Please define RTE_SDK environment variable")
> +endif
> +
> +# Default target, can be overriden by command line or environment
> +RTE_TARGET ?= x86_64-default-linuxapp-gcc

This target is not present anymore. Change it to x86_64-native-linuxapp-gcc.

> +
> +include $(RTE_SDK)/mk/rte.vars.mk
> +
> +# binary name
> +APP = distributor_app
> +
> +# all source are stored in SRCS-y
> +SRCS-y := main.c
> +
> +CFLAGS += $(WERROR_FLAGS)
> +
> +# workaround for a gcc bug with noreturn attribute
> +# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
> +CFLAGS_main.o += -Wno-return-type
> +endif
> +
> +EXTRA_CFLAGS += -O3 -Wfatal-errors
> +
> +include $(RTE_SDK)/mk/rte.extapp.mk
> diff --git a/examples/distributor_app/main.c
> b/examples/distributor_app/main.c
> new file mode 100644
> index 0000000..628810a
> --- /dev/null
> +++ b/examples/distributor_app/main.c
> @@ -0,0 +1,585 @@
> +/*-
> + *   BSD LICENSE
> + *
> + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> + *   All rights reserved.
> + *
> + *   Redistribution and use in source and binary forms, with or without
> + *   modification, are permitted provided that the following conditions
> + *   are met:
> + *
> + *     * Redistributions of source code must retain the above copyright
> + *       notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *       notice, this list of conditions and the following disclaimer in
> + *       the documentation and/or other materials provided with the
> + *       distribution.
> + *     * Neither the name of Intel Corporation nor the names of its
> + *       contributors may be used to endorse or promote products derived
> + *       from this software without specific prior written permission.
> + *
> + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> + */
> +
> +#include <stdint.h>
> +#include <inttypes.h>
> +#include <unistd.h>
> +#include <signal.h>
> +#include <getopt.h>
> +
> +#include <rte_eal.h>
> +#include <rte_ethdev.h>
> +#include <rte_cycles.h>
> +#include <rte_malloc.h>
> +#include <rte_debug.h>
> +#include <rte_distributor.h>
> +
> +#include "main.h"
> +
> +#define RX_RING_SIZE 256
> +#define RX_FREE_THRESH 32
> +#define RX_PTHRESH 8
> +#define RX_HTHRESH 8
> +#define RX_WTHRESH 0
> +
> +#define TX_RING_SIZE 512
> +#define TX_FREE_THRESH 32
> +#define TX_PTHRESH 32
> +#define TX_HTHRESH 0
> +#define TX_WTHRESH 0
> +#define TX_RSBIT_THRESH 32
> +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS |
> ETH_TXQ_FLAGS_NOVLANOFFL |\
> +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP |
> \
> +	ETH_TXQ_FLAGS_NOXSUMTCP)
> +
> +#define NUM_MBUFS ((64*1024)-1)
> +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) +
> RTE_PKTMBUF_HEADROOM)
> +#define MBUF_CACHE_SIZE 250
> +#define BURST_SIZE 32
> +#define RTE_RING_SZ 1024
> +
> +/* mask of enabled ports */
> +static uint32_t enabled_port_mask = 0;
> +
> +static volatile struct app_stats {
> +	struct {
> +		uint64_t rx_pkts;
> +		uint64_t returned_pkts;
> +		uint64_t enqueued_pkts;
> +	} rx __rte_cache_aligned;
> +
> +	struct {
> +		uint64_t dequeue_pkts;
> +		uint64_t tx_pkts;
> +	} tx __rte_cache_aligned;
> +} app_stats;
> +
> +static const struct rte_eth_conf port_conf_default = {
> +	.rxmode = {
> +		.mq_mode = ETH_MQ_RX_RSS,
> +		.max_rx_pkt_len = ETHER_MAX_LEN,
> +		.split_hdr_size = 0,
> +		.header_split   = 0, /**< Header Split disabled */
> +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> +	},
> +	.txmode = {
> +		.mq_mode = ETH_MQ_TX_NONE,
> +	},
> +	.lpbk_mode = 0,
> +	.rx_adv_conf = {
> +			.rss_conf = {
> +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> +					ETH_RSS_IPV4_TCP |
> ETH_RSS_IPV4_UDP |
> +					ETH_RSS_IPV6_TCP |
> ETH_RSS_IPV6_UDP,
> +			}
> +	},
> +};
> +
> +static const struct rte_eth_rxconf rx_conf_default = {
> +	.rx_thresh = {
> +		.pthresh = RX_PTHRESH,
> +		.hthresh = RX_HTHRESH,
> +		.wthresh = RX_WTHRESH,
> +	},
> +	.rx_free_thresh = RX_FREE_THRESH,
> +	.rx_drop_en = 0,
> +};
> +
> +static const struct rte_eth_txconf tx_conf_default = {
> +	.tx_thresh = {
> +		.pthresh = TX_PTHRESH,
> +		.hthresh = TX_HTHRESH,
> +		.wthresh = TX_WTHRESH,
> +	},
> +	.tx_free_thresh = TX_FREE_THRESH,
> +	.tx_rs_thresh = TX_RSBIT_THRESH,
> +	.txq_flags = TX_Q_FLAGS
> +
> +};
> +
> +struct output_buffer {
> +	unsigned count;
> +	struct rte_mbuf *mbufs[BURST_SIZE];
> +};
> +
> +/*
> + * Initialises a given port using global settings and with the rx buffers
> + * coming from the mbuf_pool passed as parameter
> + */
> +static inline int
> +port_init(uint8_t port, struct rte_mempool *mbuf_pool)
> +{
> +	struct rte_eth_conf port_conf = port_conf_default;
> +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> +	int retval;
> +	uint16_t q;
> +
> +	if (port >= rte_eth_dev_count())
> +		return -1;
> +
> +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> +	if (retval != 0)
> +		return retval;
> +
> +	for (q = 0; q < rxRings; q++) {
> +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> +
> 	rte_eth_dev_socket_id(port),
> +						&rx_conf_default,
> mbuf_pool);
> +		if (retval < 0)
> +			return retval;
> +	}
> +
> +	for (q = 0; q < txRings; q++) {
> +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> +
> 	rte_eth_dev_socket_id(port),
> +						&tx_conf_default);
> +		if (retval < 0)
> +			return retval;
> +	}
> +
> +	retval  = rte_eth_dev_start(port);
> +	if (retval < 0)
> +		return retval;
> +
> +	struct rte_eth_link link;
> +	rte_eth_link_get_nowait(port, &link);
> +	if (!link.link_status) {
> +		sleep(1);
> +		rte_eth_link_get_nowait(port, &link);
> +	}
> +
> +	if (!link.link_status) {
> +		printf("Link down on port %"PRIu8"\n", port);
> +		return 0;
> +	}
> +
> +	struct ether_addr addr;
> +	rte_eth_macaddr_get(port, &addr);
> +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> +			(unsigned)port,
> +			addr.addr_bytes[0], addr.addr_bytes[1],
> +			addr.addr_bytes[2], addr.addr_bytes[3],
> +			addr.addr_bytes[4], addr.addr_bytes[5]);
> +
> +	rte_eth_promiscuous_enable(port);
> +
> +	return 0;
> +}
> +
> +struct lcore_params {
> +	unsigned worker_id;
> +	struct rte_distributor *d;
> +	struct rte_ring *r;
> +};
> +
> +static __attribute__((noreturn)) void
> +lcore_rx(struct lcore_params *p)
> +{
> +	struct rte_distributor *d = p->d;
> +	struct rte_ring *r = p->r;
> +	const uint8_t nb_ports = rte_eth_dev_count();
> +	const int socket_id = rte_socket_id();
> +	uint8_t port;
> +
> +	for (port = 0; port < nb_ports; port++) {
> +		/* skip ports that are not enabled */
> +		if ((enabled_port_mask & (1 << port)) == 0)
> +			continue;
> +
> +		if (rte_eth_dev_socket_id(port) > 0 &&
> +				rte_eth_dev_socket_id(port) != socket_id)
> +			printf("WARNING, port %u is on remote NUMA node
> to "
> +					"RX thread.\n\tPerformance will not
> "
> +					"be optimal.\n", port);
> +	}
> +
> +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> +	port = 0;
> +	for (;;) {
> +		/* skip ports that are not enabled */
> +		if ((enabled_port_mask & (1 << port)) == 0) {
> +			if (++port == nb_ports)
> +				port = 0;
> +			continue;
> +		}
> +		struct rte_mbuf *bufs[BURST_SIZE*2];
> +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> +				BURST_SIZE);
> +		app_stats.rx.rx_pkts += nb_rx;
> +
> +		rte_distributor_process(d, bufs, nb_rx);
> +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> +				bufs, BURST_SIZE*2);
> +		app_stats.rx.returned_pkts += nb_ret;
> +		if (unlikely(nb_ret == 0))
> +			continue;
> +
> +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs,
> nb_ret);
> +		app_stats.rx.enqueued_pkts += sent;
> +		if (unlikely(sent < nb_ret)) {
> +			printf("Packet loss due to full ring\n");

I would remove this printf. If core is too busy to process packets, this may make performance worse.
Statistics should reflect this packet loss.

> +			while (sent < nb_ret)
> +				rte_pktmbuf_free(bufs[sent++]);
> +		}
> +		if (++port == nb_ports)
> +			port = 0;
> +	}
> +}
> +
> +static inline void
> +flush_one_port(struct output_buffer *outbuf, uint8_t outp)
> +{
> +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> +			outbuf->count);
> +	app_stats.tx.tx_pkts += nb_tx;
> +
> +	if (unlikely(nb_tx < outbuf->count)) {
> +		printf("Packet loss with tx_burst\n");

Same here. This is fine for debugging, but statistics are updated as well, so we do not need this printf.

> +		do {
> +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> +		} while (++nb_tx < outbuf->count);
> +	}
> +	outbuf->count = 0;
> +}
> +
> +static inline void
> +flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
> +{
> +	uint8_t outp;
> +	for (outp = 0; outp < nb_ports; outp++) {
> +		/* skip ports that are not enabled */
> +		if ((enabled_port_mask & (1 << outp)) == 0)
> +			continue;
> +
> +		if (tx_buffers[outp].count == 0)
> +			continue;
> +
> +		flush_one_port(&tx_buffers[outp], outp);
> +	}
> +}
> +
> +static __attribute__((noreturn)) void
> +lcore_tx(struct rte_ring *in_r)
> +{
> +	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
> +	const uint8_t nb_ports = rte_eth_dev_count();
> +	const int socket_id = rte_socket_id();
> +	uint8_t port;
> +
> +	for (port = 0; port < nb_ports; port++) {
> +		/* skip ports that are not enabled */
> +		if ((enabled_port_mask & (1 << port)) == 0)
> +			continue;
> +
> +		if (rte_eth_dev_socket_id(port) > 0 &&
> +				rte_eth_dev_socket_id(port) != socket_id)
> +			printf("WARNING, port %u is on remote NUMA node
> to "
> +					"TX thread.\n\tPerformance will not "
> +					"be optimal.\n", port);
> +	}
> +
> +	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
> +	for (;;) {
> +		for (port = 0; port < nb_ports; port++) {
> +			/* skip ports that are not enabled */
> +			if ((enabled_port_mask & (1 << port)) == 0)
> +				continue;
> +
> +			struct rte_mbuf *bufs[BURST_SIZE];
> +			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
> +					(void *)bufs, BURST_SIZE);
> +			app_stats.tx.dequeue_pkts += nb_rx;
> +
> +			/* if we get no traffic, flush anything we have */
> +			if (unlikely(nb_rx == 0)) {
> +				flush_all_ports(tx_buffers, nb_ports);
> +				continue;
> +			}
> +
> +			/* for traffic we receive, queue it up for transmit */
> +			uint16_t i;
> +			_mm_prefetch(bufs[0], 0);
> +			_mm_prefetch(bufs[1], 0);
> +			_mm_prefetch(bufs[2], 0);
> +			for (i = 0; i < nb_rx; i++) {
> +				struct output_buffer *outbuf;
> +				uint8_t outp;
> +				_mm_prefetch(bufs[i + 3], 0);
> +				/* workers should update in_port to hold the
> +				 * output port value */
> +				outp = bufs[i]->port;
> +				/* skip ports that are not enabled */
> +				if ((enabled_port_mask & (1 << outp)) == 0)
> +					continue;
> +
> +				outbuf = &tx_buffers[outp];
> +				outbuf->mbufs[outbuf->count++] = bufs[i];
> +				if (outbuf->count == BURST_SIZE)
> +					flush_one_port(outbuf, outp);
> +			}
> +		}
> +	}
> +}
> +
> +
> +static __attribute__((noreturn)) void
> +lcore_worker(struct lcore_params *p)
> +{
> +	struct rte_distributor *d = p->d;
> +	const unsigned id = p->worker_id;
> +	/* for single port, xor_val will be zero so we won't modify the output
> +	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
> +	 */
> +	const unsigned xor_val = (rte_eth_dev_count() > 1);
> +	struct rte_mbuf *buf = NULL;
> +
> +	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
> +	for (;;) {
> +		buf = rte_distributor_get_pkt(d, id, buf);
> +		buf->port ^= xor_val;
> +	}
> +}
> +
> +static void
> +int_handler(int sig_num)
> +{
> +	struct rte_eth_stats eth_stats;
> +	unsigned i;
> +
> +	printf("Exiting on signal %d\n", sig_num);
> +
> +	printf("\nRX thread stats:\n");
> +	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
> +	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
> +	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
> +
> +	printf("\nTX thread stats:\n");
> +	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
> +	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
> +
> +	for (i = 0; i < rte_eth_dev_count(); i++) {
> +		rte_eth_stats_get(i, &eth_stats);
> +		printf("\nPort %u stats:\n", i);
> +		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
> +		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
> +		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
> +		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
> +		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
> +	}
> +	exit(0);
> +}
> +
> +/* display usage */
> +static void
> +print_usage(const char *prgname)
> +{
> +	printf("%s [EAL options] -- -p PORTMASK\n"
> +			"  -p PORTMASK: hexadecimal bitmask of ports to
> configure\n",
> +			prgname);
> +}
> +
> +static int
> +parse_portmask(const char *portmask)
> +{
> +	char *end = NULL;
> +	unsigned long pm;
> +
> +	/* parse hexadecimal string */
> +	pm = strtoul(portmask, &end, 16);
> +	if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
> +		return -1;
> +
> +	if (pm == 0)
> +		return -1;
> +
> +	return pm;
> +}
> +
> +/* Parse the argument given in the command line of the application */
> +static int
> +parse_args(int argc, char **argv)
> +{
> +	int opt;
> +	char **argvopt;
> +	int option_index;
> +	char *prgname = argv[0];
> +	static struct option lgopts[] = {
> +		{NULL, 0, 0, 0}
> +	};
> +
> +	argvopt = argv;
> +
> +	while ((opt = getopt_long(argc, argvopt, "p:",
> +			lgopts, &option_index)) != EOF) {
> +
> +		switch (opt) {
> +			/* portmask */
> +			case 'p':
> +				enabled_port_mask =
> parse_portmask(optarg);
> +				if (enabled_port_mask == 0) {
> +					printf("invalid portmask\n");
> +					print_usage(prgname);
> +					return -1;
> +				}
> +				break;
> +
> +			default:
> +				print_usage(prgname);
> +				return -1;
> +		}
> +	}
> +
> +if (optind <= 1) {
> +	print_usage(prgname);
> +	return -1;
> +}
> +
> +	argv[optind-1] = prgname;
> +
> +	optind = 0; /* reset getopt lib */
> +	return 0;
> +}
> +
> +/* Main function, does initialization and calls the per-lcore functions */
> +int
> +MAIN(int argc, char *argv[])
> +{
> +	struct rte_mempool *mbuf_pool;
> +	struct rte_distributor *d;
> +	struct rte_ring *output_ring;
> +	unsigned lcore_id, worker_id = 0;
> +	unsigned nb_ports;
> +	uint8_t portid;
> +	uint8_t nb_ports_available;
> +
> +	/* catch ctrl-c so we can print on exit */
> +	signal(SIGINT, int_handler);
> +
> +	/* init EAL */
> +	int ret = rte_eal_init(argc, argv);
> +	if (ret < 0)
> +		rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
> +	argc -= ret;
> +	argv += ret;
> +
> +	/* parse application arguments (after the EAL ones) */
> +	ret = parse_args(argc, argv);
> +	if (ret < 0)
> +		rte_exit(EXIT_FAILURE, "Invalid distributor parameters\n");
> +
> +	if (rte_lcore_count() < 3)
> +		rte_exit(EXIT_FAILURE, "Error, This application needs at "
> +				"least 3 logical cores to run:\n"
> +				"1 lcore for packet RX and distribution\n"
> +				"1 lcore for packet TX\n"
> +				"and at least 1 lcore for worker threads\n");
> +
> +	if (rte_eal_pci_probe() != 0)
> +		rte_exit(EXIT_FAILURE, "Error with PCI probing\n");
> +
> +	nb_ports = rte_eth_dev_count();
> +	if (nb_ports == 0)
> +		rte_exit(EXIT_FAILURE, "Error: no ethernet ports
> detected\n");
> +	if (nb_ports != 1 && (nb_ports & 1))
> +		rte_exit(EXIT_FAILURE, "Error: number of ports must be
> even, except "
> +				"when using a single port\n");
> +
> +	mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS *
> nb_ports,
> +			MBUF_SIZE, MBUF_CACHE_SIZE,
> +			sizeof(struct rte_pktmbuf_pool_private),
> +			rte_pktmbuf_pool_init, NULL,
> +			rte_pktmbuf_init, NULL,
> +			rte_socket_id(), 0);
> +	if (mbuf_pool == NULL)
> +		rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
> +
> +	nb_ports_available = nb_ports;
> +
> +	/* initialize all ports */
> +	for (portid = 0; portid < nb_ports; portid++) {
> +		/* skip ports that are not enabled */
> +		if ((enabled_port_mask & (1 << portid)) == 0) {
> +			printf("\nSkipping disabled port %d\n", portid);
> +			nb_ports_available--;
> +			continue;
> +		}
> +		/* init port */
> +		printf("Initializing port %u... done\n", (unsigned) portid);
> +
> +		if (port_init(portid, mbuf_pool) != 0)
> +			rte_exit(EXIT_FAILURE, "Cannot initialize port
> %"PRIu8"\n",
> +					portid);
> +	}
> +
> +	if (!nb_ports_available) {
> +		rte_exit(EXIT_FAILURE,
> +				"All available ports are disabled. Please set
> portmask.\n");
> +	}
> +
> +	d = rte_distributor_create("PKT_DIST", rte_socket_id(),
> +			rte_lcore_count() - 2);
> +	if (d == NULL)
> +		rte_exit(EXIT_FAILURE, "Cannot create distributor\n");
> +
> +	/* scheduler ring is read only by the transmitter core, but written to
> +	 * by multiple threads
> +	 */
> +	output_ring = rte_ring_create("Output_ring", RTE_RING_SZ,
> +			rte_socket_id(), RING_F_SC_DEQ);
> +	if (output_ring == NULL)
> +		rte_exit(EXIT_FAILURE, "Cannot create output ring\n");
> +
> +	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
> +		if (worker_id == rte_lcore_count() - 2)
> +			rte_eal_remote_launch((lcore_function_t
> *)lcore_tx,
> +					output_ring, lcore_id);
> +		else {
> +			struct lcore_params *p =
> +					rte_malloc(NULL, sizeof(*p), 0);
> +			if (!p)
> +				rte_panic("malloc failure\n");
> +			*p = (struct lcore_params){worker_id, d,
> output_ring};
> +			rte_eal_remote_launch((lcore_function_t
> *)lcore_worker,
> +					p, lcore_id);
> +		}
> +		worker_id++;
> +	}
> +	/* call lcore_main on master core only */
> +	struct lcore_params p = { 0, d, output_ring };
> +	lcore_rx(&p);
> +	return 0;
> +}
> diff --git a/examples/distributor_app/main.h
> b/examples/distributor_app/main.h
> new file mode 100644
> index 0000000..2682d15
> --- /dev/null
> +++ b/examples/distributor_app/main.h
> @@ -0,0 +1,46 @@
> +/*-
> + *   BSD LICENSE
> + *
> + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> + *   All rights reserved.
> + *
> + *   Redistribution and use in source and binary forms, with or without
> + *   modification, are permitted provided that the following conditions
> + *   are met:
> + *
> + *     * Redistributions of source code must retain the above copyright
> + *       notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *       notice, this list of conditions and the following disclaimer in
> + *       the documentation and/or other materials provided with the
> + *       distribution.
> + *     * Neither the name of Intel Corporation nor the names of its
> + *       contributors may be used to endorse or promote products derived
> + *       from this software without specific prior written permission.
> + *
> + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> + */
> +
> +#ifndef _MAIN_H_
> +#define _MAIN_H_
> +
> +
> +#ifdef RTE_EXEC_ENV_BAREMETAL
> +#define MAIN _main
> +#else
> +#define MAIN main
> +#endif
> +
> +int MAIN(int argc, char *argv[]);
> +
> +#endif /* ifndef _MAIN_H_ */
> --
> 1.9.3

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
  2014-09-26 15:11   ` De Lara Guarch, Pablo
@ 2014-09-26 15:51     ` Ananyev, Konstantin
  2014-09-29 12:39       ` Pattan, Reshma
  0 siblings, 1 reply; 38+ messages in thread
From: Ananyev, Konstantin @ 2014-09-26 15:51 UTC (permalink / raw)
  To: De Lara Guarch, Pablo, Pattan, Reshma, dev



> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of De Lara Guarch, Pablo
> Sent: Friday, September 26, 2014 4:12 PM
> To: Pattan, Reshma; dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> 
> Hi,
> 
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of reshmapa
> > Sent: Wednesday, September 24, 2014 3:17 PM
> > To: dev@dpdk.org
> > Subject: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> >
> > From: Reshma Pattan <reshma.pattan@intel.com>
> >
> > A new sample app that shows the usage of the distributor library. This
> > app works as follows:
> >
> > * An RX thread runs which pulls packets from each ethernet port in turn
> >   and passes those packets to worker using a distributor component.
> > * The workers take the packets in turn, and determine the output port
> >   for those packets using basic l2forwarding doing an xor on the source
> >   port id.
> > * The RX thread takes the returned packets from the workers and enqueue
> >   those packets into an rte_ring structure.
> > * A TX thread pulls the packets off the rte_ring structure and then
> >   sends each packet out the output port specified previously by the worker
> > * Command-line option support provided only for portmask.
> >
> > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
> > ---
> >  examples/Makefile                 |   1 +
> >  examples/distributor_app/Makefile |  57 ++++
> >  examples/distributor_app/main.c   | 585
> > ++++++++++++++++++++++++++++++++++++++
> >  examples/distributor_app/main.h   |  46 +++
> >  4 files changed, 689 insertions(+)
> >  create mode 100644 examples/distributor_app/Makefile
> >  create mode 100644 examples/distributor_app/main.c
> >  create mode 100644 examples/distributor_app/main.h
> >
> > diff --git a/examples/Makefile b/examples/Makefile
> > index 6245f83..2ba82b0 100644
> > --- a/examples/Makefile
> > +++ b/examples/Makefile
> > @@ -66,5 +66,6 @@ DIRS-y += vhost
> >  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
> >  DIRS-y += vmdq
> >  DIRS-y += vmdq_dcb
> > +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> >
> >  include $(RTE_SDK)/mk/rte.extsubdir.mk
> > diff --git a/examples/distributor_app/Makefile
> > b/examples/distributor_app/Makefile
> > new file mode 100644
> > index 0000000..394785d
> > --- /dev/null
> > +++ b/examples/distributor_app/Makefile
> > @@ -0,0 +1,57 @@
> > +#   BSD LICENSE
> > +#
> > +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > +#   All rights reserved.
> > +#
> > +#   Redistribution and use in source and binary forms, with or without
> > +#   modification, are permitted provided that the following conditions
> > +#   are met:
> > +#
> > +#     * Redistributions of source code must retain the above copyright
> > +#       notice, this list of conditions and the following disclaimer.
> > +#     * Redistributions in binary form must reproduce the above copyright
> > +#       notice, this list of conditions and the following disclaimer in
> > +#       the documentation and/or other materials provided with the
> > +#       distribution.
> > +#     * Neither the name of Intel Corporation nor the names of its
> > +#       contributors may be used to endorse or promote products derived
> > +#       from this software without specific prior written permission.
> > +#
> > +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > CONTRIBUTORS
> > +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > NOT
> > +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > FITNESS FOR
> > +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > COPYRIGHT
> > +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > INCIDENTAL,
> > +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > NOT
> > +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> > OF USE,
> > +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > AND ON ANY
> > +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > TORT
> > +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> > THE USE
> > +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > DAMAGE.
> > +
> > +ifeq ($(RTE_SDK),)
> > +$(error "Please define RTE_SDK environment variable")
> > +endif
> > +
> > +# Default target, can be overriden by command line or environment
> > +RTE_TARGET ?= x86_64-default-linuxapp-gcc
> 
> This target is not present anymore. Change it to x86_64-native-linuxapp-gcc.
> 
> > +
> > +include $(RTE_SDK)/mk/rte.vars.mk
> > +
> > +# binary name
> > +APP = distributor_app
> > +
> > +# all source are stored in SRCS-y
> > +SRCS-y := main.c
> > +
> > +CFLAGS += $(WERROR_FLAGS)
> > +
> > +# workaround for a gcc bug with noreturn attribute
> > +# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
> > +CFLAGS_main.o += -Wno-return-type
> > +endif
> > +
> > +EXTRA_CFLAGS += -O3 -Wfatal-errors
> > +
> > +include $(RTE_SDK)/mk/rte.extapp.mk
> > diff --git a/examples/distributor_app/main.c
> > b/examples/distributor_app/main.c
> > new file mode 100644
> > index 0000000..628810a
> > --- /dev/null
> > +++ b/examples/distributor_app/main.c
> > @@ -0,0 +1,585 @@
> > +/*-
> > + *   BSD LICENSE
> > + *
> > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > + *   All rights reserved.
> > + *
> > + *   Redistribution and use in source and binary forms, with or without
> > + *   modification, are permitted provided that the following conditions
> > + *   are met:
> > + *
> > + *     * Redistributions of source code must retain the above copyright
> > + *       notice, this list of conditions and the following disclaimer.
> > + *     * Redistributions in binary form must reproduce the above copyright
> > + *       notice, this list of conditions and the following disclaimer in
> > + *       the documentation and/or other materials provided with the
> > + *       distribution.
> > + *     * Neither the name of Intel Corporation nor the names of its
> > + *       contributors may be used to endorse or promote products derived
> > + *       from this software without specific prior written permission.
> > + *
> > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > CONTRIBUTORS
> > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > NOT
> > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > FITNESS FOR
> > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > COPYRIGHT
> > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > INCIDENTAL,
> > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > NOT
> > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> > OF USE,
> > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > AND ON ANY
> > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > TORT
> > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> > THE USE
> > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > DAMAGE.
> > + */
> > +
> > +#include <stdint.h>
> > +#include <inttypes.h>
> > +#include <unistd.h>
> > +#include <signal.h>
> > +#include <getopt.h>
> > +
> > +#include <rte_eal.h>
> > +#include <rte_ethdev.h>
> > +#include <rte_cycles.h>
> > +#include <rte_malloc.h>
> > +#include <rte_debug.h>
> > +#include <rte_distributor.h>
> > +
> > +#include "main.h"
> > +
> > +#define RX_RING_SIZE 256
> > +#define RX_FREE_THRESH 32
> > +#define RX_PTHRESH 8
> > +#define RX_HTHRESH 8
> > +#define RX_WTHRESH 0
> > +
> > +#define TX_RING_SIZE 512
> > +#define TX_FREE_THRESH 32
> > +#define TX_PTHRESH 32
> > +#define TX_HTHRESH 0
> > +#define TX_WTHRESH 0
> > +#define TX_RSBIT_THRESH 32
> > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS |
> > ETH_TXQ_FLAGS_NOVLANOFFL |\
> > +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP |
> > \
> > +	ETH_TXQ_FLAGS_NOXSUMTCP)
> > +
> > +#define NUM_MBUFS ((64*1024)-1)
> > +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) +
> > RTE_PKTMBUF_HEADROOM)
> > +#define MBUF_CACHE_SIZE 250
> > +#define BURST_SIZE 32
> > +#define RTE_RING_SZ 1024
> > +
> > +/* mask of enabled ports */
> > +static uint32_t enabled_port_mask = 0;
> > +
> > +static volatile struct app_stats {
> > +	struct {
> > +		uint64_t rx_pkts;
> > +		uint64_t returned_pkts;
> > +		uint64_t enqueued_pkts;
> > +	} rx __rte_cache_aligned;
> > +
> > +	struct {
> > +		uint64_t dequeue_pkts;
> > +		uint64_t tx_pkts;
> > +	} tx __rte_cache_aligned;
> > +} app_stats;
> > +
> > +static const struct rte_eth_conf port_conf_default = {
> > +	.rxmode = {
> > +		.mq_mode = ETH_MQ_RX_RSS,
> > +		.max_rx_pkt_len = ETHER_MAX_LEN,
> > +		.split_hdr_size = 0,
> > +		.header_split   = 0, /**< Header Split disabled */
> > +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> > +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> > +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> > +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> > +	},
> > +	.txmode = {
> > +		.mq_mode = ETH_MQ_TX_NONE,
> > +	},
> > +	.lpbk_mode = 0,
> > +	.rx_adv_conf = {
> > +			.rss_conf = {
> > +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> > +					ETH_RSS_IPV4_TCP |
> > ETH_RSS_IPV4_UDP |
> > +					ETH_RSS_IPV6_TCP |
> > ETH_RSS_IPV6_UDP,
> > +			}
> > +	},
> > +};
> > +
> > +static const struct rte_eth_rxconf rx_conf_default = {
> > +	.rx_thresh = {
> > +		.pthresh = RX_PTHRESH,
> > +		.hthresh = RX_HTHRESH,
> > +		.wthresh = RX_WTHRESH,
> > +	},
> > +	.rx_free_thresh = RX_FREE_THRESH,
> > +	.rx_drop_en = 0,
> > +};
> > +
> > +static const struct rte_eth_txconf tx_conf_default = {
> > +	.tx_thresh = {
> > +		.pthresh = TX_PTHRESH,
> > +		.hthresh = TX_HTHRESH,
> > +		.wthresh = TX_WTHRESH,
> > +	},
> > +	.tx_free_thresh = TX_FREE_THRESH,
> > +	.tx_rs_thresh = TX_RSBIT_THRESH,
> > +	.txq_flags = TX_Q_FLAGS
> > +
> > +};
> > +
> > +struct output_buffer {
> > +	unsigned count;
> > +	struct rte_mbuf *mbufs[BURST_SIZE];
> > +};
> > +
> > +/*
> > + * Initialises a given port using global settings and with the rx buffers
> > + * coming from the mbuf_pool passed as parameter
> > + */
> > +static inline int
> > +port_init(uint8_t port, struct rte_mempool *mbuf_pool)
> > +{
> > +	struct rte_eth_conf port_conf = port_conf_default;
> > +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> > +	int retval;
> > +	uint16_t q;
> > +
> > +	if (port >= rte_eth_dev_count())
> > +		return -1;
> > +
> > +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> > +	if (retval != 0)
> > +		return retval;
> > +
> > +	for (q = 0; q < rxRings; q++) {
> > +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> > +
> > 	rte_eth_dev_socket_id(port),
> > +						&rx_conf_default,
> > mbuf_pool);
> > +		if (retval < 0)
> > +			return retval;
> > +	}
> > +
> > +	for (q = 0; q < txRings; q++) {
> > +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> > +
> > 	rte_eth_dev_socket_id(port),
> > +						&tx_conf_default);
> > +		if (retval < 0)
> > +			return retval;
> > +	}
> > +
> > +	retval  = rte_eth_dev_start(port);
> > +	if (retval < 0)
> > +		return retval;
> > +
> > +	struct rte_eth_link link;
> > +	rte_eth_link_get_nowait(port, &link);
> > +	if (!link.link_status) {
> > +		sleep(1);
> > +		rte_eth_link_get_nowait(port, &link);
> > +	}
> > +
> > +	if (!link.link_status) {
> > +		printf("Link down on port %"PRIu8"\n", port);
> > +		return 0;
> > +	}
> > +
> > +	struct ether_addr addr;
> > +	rte_eth_macaddr_get(port, &addr);
> > +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> > +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> > +			(unsigned)port,
> > +			addr.addr_bytes[0], addr.addr_bytes[1],
> > +			addr.addr_bytes[2], addr.addr_bytes[3],
> > +			addr.addr_bytes[4], addr.addr_bytes[5]);
> > +
> > +	rte_eth_promiscuous_enable(port);
> > +
> > +	return 0;
> > +}
> > +
> > +struct lcore_params {
> > +	unsigned worker_id;
> > +	struct rte_distributor *d;
> > +	struct rte_ring *r;
> > +};
> > +
> > +static __attribute__((noreturn)) void
> > +lcore_rx(struct lcore_params *p)
> > +{
> > +	struct rte_distributor *d = p->d;
> > +	struct rte_ring *r = p->r;
> > +	const uint8_t nb_ports = rte_eth_dev_count();
> > +	const int socket_id = rte_socket_id();
> > +	uint8_t port;
> > +
> > +	for (port = 0; port < nb_ports; port++) {
> > +		/* skip ports that are not enabled */
> > +		if ((enabled_port_mask & (1 << port)) == 0)
> > +			continue;
> > +
> > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > +				rte_eth_dev_socket_id(port) != socket_id)
> > +			printf("WARNING, port %u is on remote NUMA node
> > to "
> > +					"RX thread.\n\tPerformance will not
> > "
> > +					"be optimal.\n", port);
> > +	}
> > +
> > +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> > +	port = 0;
> > +	for (;;) {
> > +		/* skip ports that are not enabled */
> > +		if ((enabled_port_mask & (1 << port)) == 0) {
> > +			if (++port == nb_ports)
> > +				port = 0;
> > +			continue;
> > +		}
> > +		struct rte_mbuf *bufs[BURST_SIZE*2];
> > +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> > +				BURST_SIZE);
> > +		app_stats.rx.rx_pkts += nb_rx;
> > +
> > +		rte_distributor_process(d, bufs, nb_rx);
> > +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> > +				bufs, BURST_SIZE*2);
> > +		app_stats.rx.returned_pkts += nb_ret;
> > +		if (unlikely(nb_ret == 0))
> > +			continue;
> > +
> > +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs,
> > nb_ret);
> > +		app_stats.rx.enqueued_pkts += sent;
> > +		if (unlikely(sent < nb_ret)) {
> > +			printf("Packet loss due to full ring\n");
> 
> I would remove this printf. If core is too busy to process packets, this may make performance worse.
> Statistics should reflect this packet loss.

Probably use RTE_LOG(DEBUG, ...).
That's way you can switch it on/off at compile time.

> 
> > +			while (sent < nb_ret)
> > +				rte_pktmbuf_free(bufs[sent++]);
> > +		}
> > +		if (++port == nb_ports)
> > +			port = 0;
> > +	}
> > +}
> > +
> > +static inline void
> > +flush_one_port(struct output_buffer *outbuf, uint8_t outp)
> > +{
> > +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> > +			outbuf->count);
> > +	app_stats.tx.tx_pkts += nb_tx;
> > +
> > +	if (unlikely(nb_tx < outbuf->count)) {
> > +		printf("Packet loss with tx_burst\n");
> 
> Same here. This is fine for debugging, but statistics are updated as well, so we do not need this printf.
> 
> > +		do {
> > +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> > +		} while (++nb_tx < outbuf->count);
> > +	}
> > +	outbuf->count = 0;
> > +}
> > +
> > +static inline void
> > +flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
> > +{
> > +	uint8_t outp;
> > +	for (outp = 0; outp < nb_ports; outp++) {
> > +		/* skip ports that are not enabled */
> > +		if ((enabled_port_mask & (1 << outp)) == 0)
> > +			continue;
> > +
> > +		if (tx_buffers[outp].count == 0)
> > +			continue;
> > +
> > +		flush_one_port(&tx_buffers[outp], outp);
> > +	}
> > +}
> > +
> > +static __attribute__((noreturn)) void
> > +lcore_tx(struct rte_ring *in_r)
> > +{
> > +	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
> > +	const uint8_t nb_ports = rte_eth_dev_count();
> > +	const int socket_id = rte_socket_id();
> > +	uint8_t port;
> > +
> > +	for (port = 0; port < nb_ports; port++) {
> > +		/* skip ports that are not enabled */
> > +		if ((enabled_port_mask & (1 << port)) == 0)
> > +			continue;
> > +
> > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > +				rte_eth_dev_socket_id(port) != socket_id)
> > +			printf("WARNING, port %u is on remote NUMA node
> > to "
> > +					"TX thread.\n\tPerformance will not "
> > +					"be optimal.\n", port);
> > +	}
> > +
> > +	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
> > +	for (;;) {
> > +		for (port = 0; port < nb_ports; port++) {
> > +			/* skip ports that are not enabled */
> > +			if ((enabled_port_mask & (1 << port)) == 0)
> > +				continue;
> > +
> > +			struct rte_mbuf *bufs[BURST_SIZE];
> > +			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
> > +					(void *)bufs, BURST_SIZE);
> > +			app_stats.tx.dequeue_pkts += nb_rx;
> > +
> > +			/* if we get no traffic, flush anything we have */
> > +			if (unlikely(nb_rx == 0)) {
> > +				flush_all_ports(tx_buffers, nb_ports);
> > +				continue;
> > +			}
> > +
> > +			/* for traffic we receive, queue it up for transmit */
> > +			uint16_t i;
> > +			_mm_prefetch(bufs[0], 0);
> > +			_mm_prefetch(bufs[1], 0);
> > +			_mm_prefetch(bufs[2], 0);
> > +			for (i = 0; i < nb_rx; i++) {
> > +				struct output_buffer *outbuf;
> > +				uint8_t outp;
> > +				_mm_prefetch(bufs[i + 3], 0);
> > +				/* workers should update in_port to hold the
> > +				 * output port value */
> > +				outp = bufs[i]->port;
> > +				/* skip ports that are not enabled */
> > +				if ((enabled_port_mask & (1 << outp)) == 0)
> > +					continue;
> > +
> > +				outbuf = &tx_buffers[outp];
> > +				outbuf->mbufs[outbuf->count++] = bufs[i];
> > +				if (outbuf->count == BURST_SIZE)
> > +					flush_one_port(outbuf, outp);
> > +			}
> > +		}
> > +	}
> > +}
> > +
> > +
> > +static __attribute__((noreturn)) void
> > +lcore_worker(struct lcore_params *p)
> > +{
> > +	struct rte_distributor *d = p->d;
> > +	const unsigned id = p->worker_id;
> > +	/* for single port, xor_val will be zero so we won't modify the output
> > +	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
> > +	 */
> > +	const unsigned xor_val = (rte_eth_dev_count() > 1);
> > +	struct rte_mbuf *buf = NULL;
> > +
> > +	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
> > +	for (;;) {
> > +		buf = rte_distributor_get_pkt(d, id, buf);
> > +		buf->port ^= xor_val;
> > +	}
> > +}
> > +
> > +static void
> > +int_handler(int sig_num)
> > +{
> > +	struct rte_eth_stats eth_stats;
> > +	unsigned i;
> > +
> > +	printf("Exiting on signal %d\n", sig_num);
> > +
> > +	printf("\nRX thread stats:\n");
> > +	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
> > +	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
> > +	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
> > +
> > +	printf("\nTX thread stats:\n");
> > +	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
> > +	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
> > +
> > +	for (i = 0; i < rte_eth_dev_count(); i++) {
> > +		rte_eth_stats_get(i, &eth_stats);
> > +		printf("\nPort %u stats:\n", i);
> > +		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
> > +		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
> > +		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
> > +		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
> > +		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
> > +	}
> > +	exit(0);
> > +}
> > +
> > +/* display usage */
> > +static void
> > +print_usage(const char *prgname)
> > +{
> > +	printf("%s [EAL options] -- -p PORTMASK\n"
> > +			"  -p PORTMASK: hexadecimal bitmask of ports to
> > configure\n",
> > +			prgname);
> > +}
> > +
> > +static int
> > +parse_portmask(const char *portmask)
> > +{
> > +	char *end = NULL;
> > +	unsigned long pm;
> > +
> > +	/* parse hexadecimal string */
> > +	pm = strtoul(portmask, &end, 16);
> > +	if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
> > +		return -1;
> > +
> > +	if (pm == 0)
> > +		return -1;
> > +
> > +	return pm;
> > +}
> > +
> > +/* Parse the argument given in the command line of the application */
> > +static int
> > +parse_args(int argc, char **argv)
> > +{
> > +	int opt;
> > +	char **argvopt;
> > +	int option_index;
> > +	char *prgname = argv[0];
> > +	static struct option lgopts[] = {
> > +		{NULL, 0, 0, 0}
> > +	};
> > +
> > +	argvopt = argv;
> > +
> > +	while ((opt = getopt_long(argc, argvopt, "p:",
> > +			lgopts, &option_index)) != EOF) {
> > +
> > +		switch (opt) {
> > +			/* portmask */
> > +			case 'p':
> > +				enabled_port_mask =
> > parse_portmask(optarg);
> > +				if (enabled_port_mask == 0) {
> > +					printf("invalid portmask\n");
> > +					print_usage(prgname);
> > +					return -1;
> > +				}
> > +				break;
> > +
> > +			default:
> > +				print_usage(prgname);
> > +				return -1;
> > +		}
> > +	}
> > +
> > +if (optind <= 1) {
> > +	print_usage(prgname);
> > +	return -1;
> > +}
> > +
> > +	argv[optind-1] = prgname;
> > +
> > +	optind = 0; /* reset getopt lib */
> > +	return 0;
> > +}
> > +
> > +/* Main function, does initialization and calls the per-lcore functions */
> > +int
> > +MAIN(int argc, char *argv[])
> > +{
> > +	struct rte_mempool *mbuf_pool;
> > +	struct rte_distributor *d;
> > +	struct rte_ring *output_ring;
> > +	unsigned lcore_id, worker_id = 0;
> > +	unsigned nb_ports;
> > +	uint8_t portid;
> > +	uint8_t nb_ports_available;
> > +
> > +	/* catch ctrl-c so we can print on exit */
> > +	signal(SIGINT, int_handler);
> > +
> > +	/* init EAL */
> > +	int ret = rte_eal_init(argc, argv);
> > +	if (ret < 0)
> > +		rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
> > +	argc -= ret;
> > +	argv += ret;
> > +
> > +	/* parse application arguments (after the EAL ones) */
> > +	ret = parse_args(argc, argv);
> > +	if (ret < 0)
> > +		rte_exit(EXIT_FAILURE, "Invalid distributor parameters\n");
> > +
> > +	if (rte_lcore_count() < 3)
> > +		rte_exit(EXIT_FAILURE, "Error, This application needs at "
> > +				"least 3 logical cores to run:\n"
> > +				"1 lcore for packet RX and distribution\n"
> > +				"1 lcore for packet TX\n"
> > +				"and at least 1 lcore for worker threads\n");
> > +
> > +	if (rte_eal_pci_probe() != 0)
> > +		rte_exit(EXIT_FAILURE, "Error with PCI probing\n");
> > +
> > +	nb_ports = rte_eth_dev_count();
> > +	if (nb_ports == 0)
> > +		rte_exit(EXIT_FAILURE, "Error: no ethernet ports
> > detected\n");
> > +	if (nb_ports != 1 && (nb_ports & 1))
> > +		rte_exit(EXIT_FAILURE, "Error: number of ports must be
> > even, except "
> > +				"when using a single port\n");
> > +
> > +	mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS *
> > nb_ports,
> > +			MBUF_SIZE, MBUF_CACHE_SIZE,
> > +			sizeof(struct rte_pktmbuf_pool_private),
> > +			rte_pktmbuf_pool_init, NULL,
> > +			rte_pktmbuf_init, NULL,
> > +			rte_socket_id(), 0);
> > +	if (mbuf_pool == NULL)
> > +		rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
> > +
> > +	nb_ports_available = nb_ports;
> > +
> > +	/* initialize all ports */
> > +	for (portid = 0; portid < nb_ports; portid++) {
> > +		/* skip ports that are not enabled */
> > +		if ((enabled_port_mask & (1 << portid)) == 0) {
> > +			printf("\nSkipping disabled port %d\n", portid);
> > +			nb_ports_available--;
> > +			continue;
> > +		}
> > +		/* init port */
> > +		printf("Initializing port %u... done\n", (unsigned) portid);
> > +
> > +		if (port_init(portid, mbuf_pool) != 0)
> > +			rte_exit(EXIT_FAILURE, "Cannot initialize port
> > %"PRIu8"\n",
> > +					portid);
> > +	}
> > +
> > +	if (!nb_ports_available) {
> > +		rte_exit(EXIT_FAILURE,
> > +				"All available ports are disabled. Please set
> > portmask.\n");
> > +	}
> > +
> > +	d = rte_distributor_create("PKT_DIST", rte_socket_id(),
> > +			rte_lcore_count() - 2);
> > +	if (d == NULL)
> > +		rte_exit(EXIT_FAILURE, "Cannot create distributor\n");
> > +
> > +	/* scheduler ring is read only by the transmitter core, but written to
> > +	 * by multiple threads
> > +	 */
> > +	output_ring = rte_ring_create("Output_ring", RTE_RING_SZ,
> > +			rte_socket_id(), RING_F_SC_DEQ);
> > +	if (output_ring == NULL)
> > +		rte_exit(EXIT_FAILURE, "Cannot create output ring\n");
> > +
> > +	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
> > +		if (worker_id == rte_lcore_count() - 2)
> > +			rte_eal_remote_launch((lcore_function_t
> > *)lcore_tx,
> > +					output_ring, lcore_id);
> > +		else {
> > +			struct lcore_params *p =
> > +					rte_malloc(NULL, sizeof(*p), 0);
> > +			if (!p)
> > +				rte_panic("malloc failure\n");
> > +			*p = (struct lcore_params){worker_id, d,
> > output_ring};
> > +			rte_eal_remote_launch((lcore_function_t
> > *)lcore_worker,
> > +					p, lcore_id);
> > +		}
> > +		worker_id++;
> > +	}
> > +	/* call lcore_main on master core only */
> > +	struct lcore_params p = { 0, d, output_ring };
> > +	lcore_rx(&p);
> > +	return 0;
> > +}
> > diff --git a/examples/distributor_app/main.h
> > b/examples/distributor_app/main.h
> > new file mode 100644
> > index 0000000..2682d15
> > --- /dev/null
> > +++ b/examples/distributor_app/main.h
> > @@ -0,0 +1,46 @@
> > +/*-
> > + *   BSD LICENSE
> > + *
> > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > + *   All rights reserved.
> > + *
> > + *   Redistribution and use in source and binary forms, with or without
> > + *   modification, are permitted provided that the following conditions
> > + *   are met:
> > + *
> > + *     * Redistributions of source code must retain the above copyright
> > + *       notice, this list of conditions and the following disclaimer.
> > + *     * Redistributions in binary form must reproduce the above copyright
> > + *       notice, this list of conditions and the following disclaimer in
> > + *       the documentation and/or other materials provided with the
> > + *       distribution.
> > + *     * Neither the name of Intel Corporation nor the names of its
> > + *       contributors may be used to endorse or promote products derived
> > + *       from this software without specific prior written permission.
> > + *
> > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > CONTRIBUTORS
> > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > NOT
> > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > FITNESS FOR
> > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > COPYRIGHT
> > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > INCIDENTAL,
> > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > NOT
> > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> > OF USE,
> > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > AND ON ANY
> > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > TORT
> > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> > THE USE
> > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > DAMAGE.
> > + */
> > +
> > +#ifndef _MAIN_H_
> > +#define _MAIN_H_
> > +
> > +
> > +#ifdef RTE_EXEC_ENV_BAREMETAL
> > +#define MAIN _main
> > +#else
> > +#define MAIN main
> > +#endif
> > +
> > +int MAIN(int argc, char *argv[]);
> > +
> > +#endif /* ifndef _MAIN_H_ */
> > --
> > 1.9.3

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
  2014-09-26 15:51     ` Ananyev, Konstantin
@ 2014-09-29 12:39       ` Pattan, Reshma
  2014-09-29 13:06         ` Ananyev, Konstantin
  0 siblings, 1 reply; 38+ messages in thread
From: Pattan, Reshma @ 2014-09-29 12:39 UTC (permalink / raw)
  To: Ananyev, Konstantin, De Lara Guarch, Pablo, dev



-----Original Message-----
From: Ananyev, Konstantin 
Sent: Friday, September 26, 2014 4:52 PM
To: De Lara Guarch, Pablo; Pattan, Reshma; dev@dpdk.org
Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app



> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of De Lara Guarch, 
> Pablo
> Sent: Friday, September 26, 2014 4:12 PM
> To: Pattan, Reshma; dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> 
> Hi,
> 
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of reshmapa
> > Sent: Wednesday, September 24, 2014 3:17 PM
> > To: dev@dpdk.org
> > Subject: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> >
> > From: Reshma Pattan <reshma.pattan@intel.com>
> >
> > A new sample app that shows the usage of the distributor library. 
> > This app works as follows:
> >
> > * An RX thread runs which pulls packets from each ethernet port in turn
> >   and passes those packets to worker using a distributor component.
> > * The workers take the packets in turn, and determine the output port
> >   for those packets using basic l2forwarding doing an xor on the source
> >   port id.
> > * The RX thread takes the returned packets from the workers and enqueue
> >   those packets into an rte_ring structure.
> > * A TX thread pulls the packets off the rte_ring structure and then
> >   sends each packet out the output port specified previously by the 
> > worker
> > * Command-line option support provided only for portmask.
> >
> > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
> > ---
> >  examples/Makefile                 |   1 +
> >  examples/distributor_app/Makefile |  57 ++++
> >  examples/distributor_app/main.c   | 585
> > ++++++++++++++++++++++++++++++++++++++
> >  examples/distributor_app/main.h   |  46 +++
> >  4 files changed, 689 insertions(+)
> >  create mode 100644 examples/distributor_app/Makefile  create mode 
> > 100644 examples/distributor_app/main.c  create mode 100644 
> > examples/distributor_app/main.h
> >
> > diff --git a/examples/Makefile b/examples/Makefile index 
> > 6245f83..2ba82b0 100644
> > --- a/examples/Makefile
> > +++ b/examples/Makefile
> > @@ -66,5 +66,6 @@ DIRS-y += vhost
> >  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen  DIRS-y += vmdq  
> > DIRS-y += vmdq_dcb
> > +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> >
> >  include $(RTE_SDK)/mk/rte.extsubdir.mk diff --git 
> > a/examples/distributor_app/Makefile
> > b/examples/distributor_app/Makefile
> > new file mode 100644
> > index 0000000..394785d
> > --- /dev/null
> > +++ b/examples/distributor_app/Makefile
> > @@ -0,0 +1,57 @@
> > +#   BSD LICENSE
> > +#
> > +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > +#   All rights reserved.
> > +#
> > +#   Redistribution and use in source and binary forms, with or without
> > +#   modification, are permitted provided that the following conditions
> > +#   are met:
> > +#
> > +#     * Redistributions of source code must retain the above copyright
> > +#       notice, this list of conditions and the following disclaimer.
> > +#     * Redistributions in binary form must reproduce the above copyright
> > +#       notice, this list of conditions and the following disclaimer in
> > +#       the documentation and/or other materials provided with the
> > +#       distribution.
> > +#     * Neither the name of Intel Corporation nor the names of its
> > +#       contributors may be used to endorse or promote products derived
> > +#       from this software without specific prior written permission.
> > +#
> > +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > CONTRIBUTORS
> > +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > NOT
> > +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > FITNESS FOR
> > +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > COPYRIGHT
> > +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > INCIDENTAL,
> > +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > NOT
> > +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> > OF USE,
> > +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > AND ON ANY
> > +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > TORT
> > +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> > THE USE
> > +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > DAMAGE.
> > +
> > +ifeq ($(RTE_SDK),)
> > +$(error "Please define RTE_SDK environment variable") endif
> > +
> > +# Default target, can be overriden by command line or environment 
> > +RTE_TARGET ?= x86_64-default-linuxapp-gcc
> 
> This target is not present anymore. Change it to x86_64-native-linuxapp-gcc.
> 
> > +
> > +include $(RTE_SDK)/mk/rte.vars.mk
> > +
> > +# binary name
> > +APP = distributor_app
> > +
> > +# all source are stored in SRCS-y
> > +SRCS-y := main.c
> > +
> > +CFLAGS += $(WERROR_FLAGS)
> > +
> > +# workaround for a gcc bug with noreturn attribute # 
> > +http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) CFLAGS_main.o += 
> > +-Wno-return-type endif
> > +
> > +EXTRA_CFLAGS += -O3 -Wfatal-errors
> > +
> > +include $(RTE_SDK)/mk/rte.extapp.mk
> > diff --git a/examples/distributor_app/main.c 
> > b/examples/distributor_app/main.c new file mode 100644 index 
> > 0000000..628810a
> > --- /dev/null
> > +++ b/examples/distributor_app/main.c
> > @@ -0,0 +1,585 @@
> > +/*-
> > + *   BSD LICENSE
> > + *
> > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > + *   All rights reserved.
> > + *
> > + *   Redistribution and use in source and binary forms, with or without
> > + *   modification, are permitted provided that the following conditions
> > + *   are met:
> > + *
> > + *     * Redistributions of source code must retain the above copyright
> > + *       notice, this list of conditions and the following disclaimer.
> > + *     * Redistributions in binary form must reproduce the above copyright
> > + *       notice, this list of conditions and the following disclaimer in
> > + *       the documentation and/or other materials provided with the
> > + *       distribution.
> > + *     * Neither the name of Intel Corporation nor the names of its
> > + *       contributors may be used to endorse or promote products derived
> > + *       from this software without specific prior written permission.
> > + *
> > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > CONTRIBUTORS
> > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > NOT
> > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > FITNESS FOR
> > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > COPYRIGHT
> > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > INCIDENTAL,
> > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > NOT
> > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> > OF USE,
> > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > AND ON ANY
> > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > TORT
> > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> > THE USE
> > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > DAMAGE.
> > + */
> > +
> > +#include <stdint.h>
> > +#include <inttypes.h>
> > +#include <unistd.h>
> > +#include <signal.h>
> > +#include <getopt.h>
> > +
> > +#include <rte_eal.h>
> > +#include <rte_ethdev.h>
> > +#include <rte_cycles.h>
> > +#include <rte_malloc.h>
> > +#include <rte_debug.h>
> > +#include <rte_distributor.h>
> > +
> > +#include "main.h"
> > +
> > +#define RX_RING_SIZE 256
> > +#define RX_FREE_THRESH 32
> > +#define RX_PTHRESH 8
> > +#define RX_HTHRESH 8
> > +#define RX_WTHRESH 0
> > +
> > +#define TX_RING_SIZE 512
> > +#define TX_FREE_THRESH 32
> > +#define TX_PTHRESH 32
> > +#define TX_HTHRESH 0
> > +#define TX_WTHRESH 0
> > +#define TX_RSBIT_THRESH 32
> > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS |
> > ETH_TXQ_FLAGS_NOVLANOFFL |\
> > +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP |
> > \
> > +	ETH_TXQ_FLAGS_NOXSUMTCP)
> > +
> > +#define NUM_MBUFS ((64*1024)-1)
> > +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) +
> > RTE_PKTMBUF_HEADROOM)
> > +#define MBUF_CACHE_SIZE 250
> > +#define BURST_SIZE 32
> > +#define RTE_RING_SZ 1024
> > +
> > +/* mask of enabled ports */
> > +static uint32_t enabled_port_mask = 0;
> > +
> > +static volatile struct app_stats {
> > +	struct {
> > +		uint64_t rx_pkts;
> > +		uint64_t returned_pkts;
> > +		uint64_t enqueued_pkts;
> > +	} rx __rte_cache_aligned;
> > +
> > +	struct {
> > +		uint64_t dequeue_pkts;
> > +		uint64_t tx_pkts;
> > +	} tx __rte_cache_aligned;
> > +} app_stats;
> > +
> > +static const struct rte_eth_conf port_conf_default = {
> > +	.rxmode = {
> > +		.mq_mode = ETH_MQ_RX_RSS,
> > +		.max_rx_pkt_len = ETHER_MAX_LEN,
> > +		.split_hdr_size = 0,
> > +		.header_split   = 0, /**< Header Split disabled */
> > +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> > +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> > +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> > +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> > +	},
> > +	.txmode = {
> > +		.mq_mode = ETH_MQ_TX_NONE,
> > +	},
> > +	.lpbk_mode = 0,
> > +	.rx_adv_conf = {
> > +			.rss_conf = {
> > +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> > +					ETH_RSS_IPV4_TCP |
> > ETH_RSS_IPV4_UDP |
> > +					ETH_RSS_IPV6_TCP |
> > ETH_RSS_IPV6_UDP,
> > +			}
> > +	},
> > +};
> > +
> > +static const struct rte_eth_rxconf rx_conf_default = {
> > +	.rx_thresh = {
> > +		.pthresh = RX_PTHRESH,
> > +		.hthresh = RX_HTHRESH,
> > +		.wthresh = RX_WTHRESH,
> > +	},
> > +	.rx_free_thresh = RX_FREE_THRESH,
> > +	.rx_drop_en = 0,
> > +};
> > +
> > +static const struct rte_eth_txconf tx_conf_default = {
> > +	.tx_thresh = {
> > +		.pthresh = TX_PTHRESH,
> > +		.hthresh = TX_HTHRESH,
> > +		.wthresh = TX_WTHRESH,
> > +	},
> > +	.tx_free_thresh = TX_FREE_THRESH,
> > +	.tx_rs_thresh = TX_RSBIT_THRESH,
> > +	.txq_flags = TX_Q_FLAGS
> > +
> > +};
> > +
> > +struct output_buffer {
> > +	unsigned count;
> > +	struct rte_mbuf *mbufs[BURST_SIZE]; };
> > +
> > +/*
> > + * Initialises a given port using global settings and with the rx 
> > +buffers
> > + * coming from the mbuf_pool passed as parameter  */ static inline 
> > +int port_init(uint8_t port, struct rte_mempool *mbuf_pool) {
> > +	struct rte_eth_conf port_conf = port_conf_default;
> > +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> > +	int retval;
> > +	uint16_t q;
> > +
> > +	if (port >= rte_eth_dev_count())
> > +		return -1;
> > +
> > +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> > +	if (retval != 0)
> > +		return retval;
> > +
> > +	for (q = 0; q < rxRings; q++) {
> > +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> > +
> > 	rte_eth_dev_socket_id(port),
> > +						&rx_conf_default,
> > mbuf_pool);
> > +		if (retval < 0)
> > +			return retval;
> > +	}
> > +
> > +	for (q = 0; q < txRings; q++) {
> > +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> > +
> > 	rte_eth_dev_socket_id(port),
> > +						&tx_conf_default);
> > +		if (retval < 0)
> > +			return retval;
> > +	}
> > +
> > +	retval  = rte_eth_dev_start(port);
> > +	if (retval < 0)
> > +		return retval;
> > +
> > +	struct rte_eth_link link;
> > +	rte_eth_link_get_nowait(port, &link);
> > +	if (!link.link_status) {
> > +		sleep(1);
> > +		rte_eth_link_get_nowait(port, &link);
> > +	}
> > +
> > +	if (!link.link_status) {
> > +		printf("Link down on port %"PRIu8"\n", port);
> > +		return 0;
> > +	}
> > +
> > +	struct ether_addr addr;
> > +	rte_eth_macaddr_get(port, &addr);
> > +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> > +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> > +			(unsigned)port,
> > +			addr.addr_bytes[0], addr.addr_bytes[1],
> > +			addr.addr_bytes[2], addr.addr_bytes[3],
> > +			addr.addr_bytes[4], addr.addr_bytes[5]);
> > +
> > +	rte_eth_promiscuous_enable(port);
> > +
> > +	return 0;
> > +}
> > +
> > +struct lcore_params {
> > +	unsigned worker_id;
> > +	struct rte_distributor *d;
> > +	struct rte_ring *r;
> > +};
> > +
> > +static __attribute__((noreturn)) void lcore_rx(struct lcore_params 
> > +*p) {
> > +	struct rte_distributor *d = p->d;
> > +	struct rte_ring *r = p->r;
> > +	const uint8_t nb_ports = rte_eth_dev_count();
> > +	const int socket_id = rte_socket_id();
> > +	uint8_t port;
> > +
> > +	for (port = 0; port < nb_ports; port++) {
> > +		/* skip ports that are not enabled */
> > +		if ((enabled_port_mask & (1 << port)) == 0)
> > +			continue;
> > +
> > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > +				rte_eth_dev_socket_id(port) != socket_id)
> > +			printf("WARNING, port %u is on remote NUMA node
> > to "
> > +					"RX thread.\n\tPerformance will not
> > "
> > +					"be optimal.\n", port);
> > +	}
> > +
> > +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> > +	port = 0;
> > +	for (;;) {
> > +		/* skip ports that are not enabled */
> > +		if ((enabled_port_mask & (1 << port)) == 0) {
> > +			if (++port == nb_ports)
> > +				port = 0;
> > +			continue;
> > +		}
> > +		struct rte_mbuf *bufs[BURST_SIZE*2];
> > +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> > +				BURST_SIZE);
> > +		app_stats.rx.rx_pkts += nb_rx;
> > +
> > +		rte_distributor_process(d, bufs, nb_rx);
> > +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> > +				bufs, BURST_SIZE*2);
> > +		app_stats.rx.returned_pkts += nb_ret;
> > +		if (unlikely(nb_ret == 0))
> > +			continue;
> > +
> > +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs,
> > nb_ret);
> > +		app_stats.rx.enqueued_pkts += sent;
> > +		if (unlikely(sent < nb_ret)) {
> > +			printf("Packet loss due to full ring\n");
> 
> I would remove this printf. If core is too busy to process packets, this may make performance worse.
> Statistics should reflect this packet loss.

>Probably use RTE_LOG(DEBUG, ...).
>That's way you can switch it on/off at compile time.

By default  LOG_LEVEL is 8 in config/common_linuxapp, hence I see RTE_LOG(DEBUG,...) always works. 
So until unless change the LOG-LEVEL to lesser value, RTE_LOG(DEBUG,..) will be logged ..
Please let me know if I can go ahead and remove the printf as of now until the LOG_LEVEL is fixed. (or) I have to add some logic to log RTE_LOG(DEBUG,..)  only once.

> 
> > +			while (sent < nb_ret)
> > +				rte_pktmbuf_free(bufs[sent++]);
> > +		}
> > +		if (++port == nb_ports)
> > +			port = 0;
> > +	}
> > +}
> > +
> > +static inline void
> > +flush_one_port(struct output_buffer *outbuf, uint8_t outp) {
> > +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> > +			outbuf->count);
> > +	app_stats.tx.tx_pkts += nb_tx;
> > +
> > +	if (unlikely(nb_tx < outbuf->count)) {
> > +		printf("Packet loss with tx_burst\n");
> 
> Same here. This is fine for debugging, but statistics are updated as well, so we do not need this printf.
> 
> > +		do {
> > +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> > +		} while (++nb_tx < outbuf->count);
> > +	}
> > +	outbuf->count = 0;
> > +}
> > +
> > +static inline void
> > +flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports) 
> > +{
> > +	uint8_t outp;
> > +	for (outp = 0; outp < nb_ports; outp++) {
> > +		/* skip ports that are not enabled */
> > +		if ((enabled_port_mask & (1 << outp)) == 0)
> > +			continue;
> > +
> > +		if (tx_buffers[outp].count == 0)
> > +			continue;
> > +
> > +		flush_one_port(&tx_buffers[outp], outp);
> > +	}
> > +}
> > +
> > +static __attribute__((noreturn)) void lcore_tx(struct rte_ring 
> > +*in_r) {
> > +	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
> > +	const uint8_t nb_ports = rte_eth_dev_count();
> > +	const int socket_id = rte_socket_id();
> > +	uint8_t port;
> > +
> > +	for (port = 0; port < nb_ports; port++) {
> > +		/* skip ports that are not enabled */
> > +		if ((enabled_port_mask & (1 << port)) == 0)
> > +			continue;
> > +
> > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > +				rte_eth_dev_socket_id(port) != socket_id)
> > +			printf("WARNING, port %u is on remote NUMA node
> > to "
> > +					"TX thread.\n\tPerformance will not "
> > +					"be optimal.\n", port);
> > +	}
> > +
> > +	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
> > +	for (;;) {
> > +		for (port = 0; port < nb_ports; port++) {
> > +			/* skip ports that are not enabled */
> > +			if ((enabled_port_mask & (1 << port)) == 0)
> > +				continue;
> > +
> > +			struct rte_mbuf *bufs[BURST_SIZE];
> > +			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
> > +					(void *)bufs, BURST_SIZE);
> > +			app_stats.tx.dequeue_pkts += nb_rx;
> > +
> > +			/* if we get no traffic, flush anything we have */
> > +			if (unlikely(nb_rx == 0)) {
> > +				flush_all_ports(tx_buffers, nb_ports);
> > +				continue;
> > +			}
> > +
> > +			/* for traffic we receive, queue it up for transmit */
> > +			uint16_t i;
> > +			_mm_prefetch(bufs[0], 0);
> > +			_mm_prefetch(bufs[1], 0);
> > +			_mm_prefetch(bufs[2], 0);
> > +			for (i = 0; i < nb_rx; i++) {
> > +				struct output_buffer *outbuf;
> > +				uint8_t outp;
> > +				_mm_prefetch(bufs[i + 3], 0);
> > +				/* workers should update in_port to hold the
> > +				 * output port value */
> > +				outp = bufs[i]->port;
> > +				/* skip ports that are not enabled */
> > +				if ((enabled_port_mask & (1 << outp)) == 0)
> > +					continue;
> > +
> > +				outbuf = &tx_buffers[outp];
> > +				outbuf->mbufs[outbuf->count++] = bufs[i];
> > +				if (outbuf->count == BURST_SIZE)
> > +					flush_one_port(outbuf, outp);
> > +			}
> > +		}
> > +	}
> > +}
> > +
> > +
> > +static __attribute__((noreturn)) void lcore_worker(struct 
> > +lcore_params *p) {
> > +	struct rte_distributor *d = p->d;
> > +	const unsigned id = p->worker_id;
> > +	/* for single port, xor_val will be zero so we won't modify the output
> > +	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
> > +	 */
> > +	const unsigned xor_val = (rte_eth_dev_count() > 1);
> > +	struct rte_mbuf *buf = NULL;
> > +
> > +	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
> > +	for (;;) {
> > +		buf = rte_distributor_get_pkt(d, id, buf);
> > +		buf->port ^= xor_val;
> > +	}
> > +}
> > +
> > +static void
> > +int_handler(int sig_num)
> > +{
> > +	struct rte_eth_stats eth_stats;
> > +	unsigned i;
> > +
> > +	printf("Exiting on signal %d\n", sig_num);
> > +
> > +	printf("\nRX thread stats:\n");
> > +	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
> > +	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
> > +	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
> > +
> > +	printf("\nTX thread stats:\n");
> > +	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
> > +	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
> > +
> > +	for (i = 0; i < rte_eth_dev_count(); i++) {
> > +		rte_eth_stats_get(i, &eth_stats);
> > +		printf("\nPort %u stats:\n", i);
> > +		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
> > +		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
> > +		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
> > +		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
> > +		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
> > +	}
> > +	exit(0);
> > +}
> > +
> > +/* display usage */
> > +static void
> > +print_usage(const char *prgname)
> > +{
> > +	printf("%s [EAL options] -- -p PORTMASK\n"
> > +			"  -p PORTMASK: hexadecimal bitmask of ports to
> > configure\n",
> > +			prgname);
> > +}
> > +
> > +static int
> > +parse_portmask(const char *portmask) {
> > +	char *end = NULL;
> > +	unsigned long pm;
> > +
> > +	/* parse hexadecimal string */
> > +	pm = strtoul(portmask, &end, 16);
> > +	if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
> > +		return -1;
> > +
> > +	if (pm == 0)
> > +		return -1;
> > +
> > +	return pm;
> > +}
> > +
> > +/* Parse the argument given in the command line of the application 
> > +*/ static int parse_args(int argc, char **argv) {
> > +	int opt;
> > +	char **argvopt;
> > +	int option_index;
> > +	char *prgname = argv[0];
> > +	static struct option lgopts[] = {
> > +		{NULL, 0, 0, 0}
> > +	};
> > +
> > +	argvopt = argv;
> > +
> > +	while ((opt = getopt_long(argc, argvopt, "p:",
> > +			lgopts, &option_index)) != EOF) {
> > +
> > +		switch (opt) {
> > +			/* portmask */
> > +			case 'p':
> > +				enabled_port_mask =
> > parse_portmask(optarg);
> > +				if (enabled_port_mask == 0) {
> > +					printf("invalid portmask\n");
> > +					print_usage(prgname);
> > +					return -1;
> > +				}
> > +				break;
> > +
> > +			default:
> > +				print_usage(prgname);
> > +				return -1;
> > +		}
> > +	}
> > +
> > +if (optind <= 1) {
> > +	print_usage(prgname);
> > +	return -1;
> > +}
> > +
> > +	argv[optind-1] = prgname;
> > +
> > +	optind = 0; /* reset getopt lib */
> > +	return 0;
> > +}
> > +
> > +/* Main function, does initialization and calls the per-lcore 
> > +functions */ int MAIN(int argc, char *argv[]) {
> > +	struct rte_mempool *mbuf_pool;
> > +	struct rte_distributor *d;
> > +	struct rte_ring *output_ring;
> > +	unsigned lcore_id, worker_id = 0;
> > +	unsigned nb_ports;
> > +	uint8_t portid;
> > +	uint8_t nb_ports_available;
> > +
> > +	/* catch ctrl-c so we can print on exit */
> > +	signal(SIGINT, int_handler);
> > +
> > +	/* init EAL */
> > +	int ret = rte_eal_init(argc, argv);
> > +	if (ret < 0)
> > +		rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
> > +	argc -= ret;
> > +	argv += ret;
> > +
> > +	/* parse application arguments (after the EAL ones) */
> > +	ret = parse_args(argc, argv);
> > +	if (ret < 0)
> > +		rte_exit(EXIT_FAILURE, "Invalid distributor parameters\n");
> > +
> > +	if (rte_lcore_count() < 3)
> > +		rte_exit(EXIT_FAILURE, "Error, This application needs at "
> > +				"least 3 logical cores to run:\n"
> > +				"1 lcore for packet RX and distribution\n"
> > +				"1 lcore for packet TX\n"
> > +				"and at least 1 lcore for worker threads\n");
> > +
> > +	if (rte_eal_pci_probe() != 0)
> > +		rte_exit(EXIT_FAILURE, "Error with PCI probing\n");
> > +
> > +	nb_ports = rte_eth_dev_count();
> > +	if (nb_ports == 0)
> > +		rte_exit(EXIT_FAILURE, "Error: no ethernet ports
> > detected\n");
> > +	if (nb_ports != 1 && (nb_ports & 1))
> > +		rte_exit(EXIT_FAILURE, "Error: number of ports must be
> > even, except "
> > +				"when using a single port\n");
> > +
> > +	mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS *
> > nb_ports,
> > +			MBUF_SIZE, MBUF_CACHE_SIZE,
> > +			sizeof(struct rte_pktmbuf_pool_private),
> > +			rte_pktmbuf_pool_init, NULL,
> > +			rte_pktmbuf_init, NULL,
> > +			rte_socket_id(), 0);
> > +	if (mbuf_pool == NULL)
> > +		rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
> > +
> > +	nb_ports_available = nb_ports;
> > +
> > +	/* initialize all ports */
> > +	for (portid = 0; portid < nb_ports; portid++) {
> > +		/* skip ports that are not enabled */
> > +		if ((enabled_port_mask & (1 << portid)) == 0) {
> > +			printf("\nSkipping disabled port %d\n", portid);
> > +			nb_ports_available--;
> > +			continue;
> > +		}
> > +		/* init port */
> > +		printf("Initializing port %u... done\n", (unsigned) portid);
> > +
> > +		if (port_init(portid, mbuf_pool) != 0)
> > +			rte_exit(EXIT_FAILURE, "Cannot initialize port
> > %"PRIu8"\n",
> > +					portid);
> > +	}
> > +
> > +	if (!nb_ports_available) {
> > +		rte_exit(EXIT_FAILURE,
> > +				"All available ports are disabled. Please set
> > portmask.\n");
> > +	}
> > +
> > +	d = rte_distributor_create("PKT_DIST", rte_socket_id(),
> > +			rte_lcore_count() - 2);
> > +	if (d == NULL)
> > +		rte_exit(EXIT_FAILURE, "Cannot create distributor\n");
> > +
> > +	/* scheduler ring is read only by the transmitter core, but written to
> > +	 * by multiple threads
> > +	 */
> > +	output_ring = rte_ring_create("Output_ring", RTE_RING_SZ,
> > +			rte_socket_id(), RING_F_SC_DEQ);
> > +	if (output_ring == NULL)
> > +		rte_exit(EXIT_FAILURE, "Cannot create output ring\n");
> > +
> > +	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
> > +		if (worker_id == rte_lcore_count() - 2)
> > +			rte_eal_remote_launch((lcore_function_t
> > *)lcore_tx,
> > +					output_ring, lcore_id);
> > +		else {
> > +			struct lcore_params *p =
> > +					rte_malloc(NULL, sizeof(*p), 0);
> > +			if (!p)
> > +				rte_panic("malloc failure\n");
> > +			*p = (struct lcore_params){worker_id, d,
> > output_ring};
> > +			rte_eal_remote_launch((lcore_function_t
> > *)lcore_worker,
> > +					p, lcore_id);
> > +		}
> > +		worker_id++;
> > +	}
> > +	/* call lcore_main on master core only */
> > +	struct lcore_params p = { 0, d, output_ring };
> > +	lcore_rx(&p);
> > +	return 0;
> > +}
> > diff --git a/examples/distributor_app/main.h 
> > b/examples/distributor_app/main.h new file mode 100644 index 
> > 0000000..2682d15
> > --- /dev/null
> > +++ b/examples/distributor_app/main.h
> > @@ -0,0 +1,46 @@
> > +/*-
> > + *   BSD LICENSE
> > + *
> > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > + *   All rights reserved.
> > + *
> > + *   Redistribution and use in source and binary forms, with or without
> > + *   modification, are permitted provided that the following conditions
> > + *   are met:
> > + *
> > + *     * Redistributions of source code must retain the above copyright
> > + *       notice, this list of conditions and the following disclaimer.
> > + *     * Redistributions in binary form must reproduce the above copyright
> > + *       notice, this list of conditions and the following disclaimer in
> > + *       the documentation and/or other materials provided with the
> > + *       distribution.
> > + *     * Neither the name of Intel Corporation nor the names of its
> > + *       contributors may be used to endorse or promote products derived
> > + *       from this software without specific prior written permission.
> > + *
> > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > CONTRIBUTORS
> > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > NOT
> > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > FITNESS FOR
> > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > COPYRIGHT
> > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > INCIDENTAL,
> > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > NOT
> > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> > OF USE,
> > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > AND ON ANY
> > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > TORT
> > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> > THE USE
> > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > DAMAGE.
> > + */
> > +
> > +#ifndef _MAIN_H_
> > +#define _MAIN_H_
> > +
> > +
> > +#ifdef RTE_EXEC_ENV_BAREMETAL
> > +#define MAIN _main
> > +#else
> > +#define MAIN main
> > +#endif
> > +
> > +int MAIN(int argc, char *argv[]);
> > +
> > +#endif /* ifndef _MAIN_H_ */
> > --
> > 1.9.3

--------------------------------------------------------------
Intel Shannon Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263
Business address: Dromore House, East Park, Shannon, Co. Clare

This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
  2014-09-29 12:39       ` Pattan, Reshma
@ 2014-09-29 13:06         ` Ananyev, Konstantin
  2014-09-29 13:35           ` De Lara Guarch, Pablo
  0 siblings, 1 reply; 38+ messages in thread
From: Ananyev, Konstantin @ 2014-09-29 13:06 UTC (permalink / raw)
  To: Pattan, Reshma, De Lara Guarch, Pablo, dev



> -----Original Message-----
> From: Pattan, Reshma
> Sent: Monday, September 29, 2014 1:40 PM
> To: Ananyev, Konstantin; De Lara Guarch, Pablo; dev@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> 
> 
> 
> -----Original Message-----
> From: Ananyev, Konstantin
> Sent: Friday, September 26, 2014 4:52 PM
> To: De Lara Guarch, Pablo; Pattan, Reshma; dev@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> 
> 
> 
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of De Lara Guarch,
> > Pablo
> > Sent: Friday, September 26, 2014 4:12 PM
> > To: Pattan, Reshma; dev@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> >
> > Hi,
> >
> > > -----Original Message-----
> > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of reshmapa
> > > Sent: Wednesday, September 24, 2014 3:17 PM
> > > To: dev@dpdk.org
> > > Subject: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > >
> > > From: Reshma Pattan <reshma.pattan@intel.com>
> > >
> > > A new sample app that shows the usage of the distributor library.
> > > This app works as follows:
> > >
> > > * An RX thread runs which pulls packets from each ethernet port in turn
> > >   and passes those packets to worker using a distributor component.
> > > * The workers take the packets in turn, and determine the output port
> > >   for those packets using basic l2forwarding doing an xor on the source
> > >   port id.
> > > * The RX thread takes the returned packets from the workers and enqueue
> > >   those packets into an rte_ring structure.
> > > * A TX thread pulls the packets off the rte_ring structure and then
> > >   sends each packet out the output port specified previously by the
> > > worker
> > > * Command-line option support provided only for portmask.
> > >
> > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > > Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
> > > ---
> > >  examples/Makefile                 |   1 +
> > >  examples/distributor_app/Makefile |  57 ++++
> > >  examples/distributor_app/main.c   | 585
> > > ++++++++++++++++++++++++++++++++++++++
> > >  examples/distributor_app/main.h   |  46 +++
> > >  4 files changed, 689 insertions(+)
> > >  create mode 100644 examples/distributor_app/Makefile  create mode
> > > 100644 examples/distributor_app/main.c  create mode 100644
> > > examples/distributor_app/main.h
> > >
> > > diff --git a/examples/Makefile b/examples/Makefile index
> > > 6245f83..2ba82b0 100644
> > > --- a/examples/Makefile
> > > +++ b/examples/Makefile
> > > @@ -66,5 +66,6 @@ DIRS-y += vhost
> > >  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen  DIRS-y += vmdq
> > > DIRS-y += vmdq_dcb
> > > +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> > >
> > >  include $(RTE_SDK)/mk/rte.extsubdir.mk diff --git
> > > a/examples/distributor_app/Makefile
> > > b/examples/distributor_app/Makefile
> > > new file mode 100644
> > > index 0000000..394785d
> > > --- /dev/null
> > > +++ b/examples/distributor_app/Makefile
> > > @@ -0,0 +1,57 @@
> > > +#   BSD LICENSE
> > > +#
> > > +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > +#   All rights reserved.
> > > +#
> > > +#   Redistribution and use in source and binary forms, with or without
> > > +#   modification, are permitted provided that the following conditions
> > > +#   are met:
> > > +#
> > > +#     * Redistributions of source code must retain the above copyright
> > > +#       notice, this list of conditions and the following disclaimer.
> > > +#     * Redistributions in binary form must reproduce the above copyright
> > > +#       notice, this list of conditions and the following disclaimer in
> > > +#       the documentation and/or other materials provided with the
> > > +#       distribution.
> > > +#     * Neither the name of Intel Corporation nor the names of its
> > > +#       contributors may be used to endorse or promote products derived
> > > +#       from this software without specific prior written permission.
> > > +#
> > > +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > CONTRIBUTORS
> > > +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > > NOT
> > > +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > FITNESS FOR
> > > +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > COPYRIGHT
> > > +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > INCIDENTAL,
> > > +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > > NOT
> > > +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> > > OF USE,
> > > +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > > AND ON ANY
> > > +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > > TORT
> > > +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> > > THE USE
> > > +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > DAMAGE.
> > > +
> > > +ifeq ($(RTE_SDK),)
> > > +$(error "Please define RTE_SDK environment variable") endif
> > > +
> > > +# Default target, can be overriden by command line or environment
> > > +RTE_TARGET ?= x86_64-default-linuxapp-gcc
> >
> > This target is not present anymore. Change it to x86_64-native-linuxapp-gcc.
> >
> > > +
> > > +include $(RTE_SDK)/mk/rte.vars.mk
> > > +
> > > +# binary name
> > > +APP = distributor_app
> > > +
> > > +# all source are stored in SRCS-y
> > > +SRCS-y := main.c
> > > +
> > > +CFLAGS += $(WERROR_FLAGS)
> > > +
> > > +# workaround for a gcc bug with noreturn attribute #
> > > +http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> > > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) CFLAGS_main.o +=
> > > +-Wno-return-type endif
> > > +
> > > +EXTRA_CFLAGS += -O3 -Wfatal-errors
> > > +
> > > +include $(RTE_SDK)/mk/rte.extapp.mk
> > > diff --git a/examples/distributor_app/main.c
> > > b/examples/distributor_app/main.c new file mode 100644 index
> > > 0000000..628810a
> > > --- /dev/null
> > > +++ b/examples/distributor_app/main.c
> > > @@ -0,0 +1,585 @@
> > > +/*-
> > > + *   BSD LICENSE
> > > + *
> > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > + *   All rights reserved.
> > > + *
> > > + *   Redistribution and use in source and binary forms, with or without
> > > + *   modification, are permitted provided that the following conditions
> > > + *   are met:
> > > + *
> > > + *     * Redistributions of source code must retain the above copyright
> > > + *       notice, this list of conditions and the following disclaimer.
> > > + *     * Redistributions in binary form must reproduce the above copyright
> > > + *       notice, this list of conditions and the following disclaimer in
> > > + *       the documentation and/or other materials provided with the
> > > + *       distribution.
> > > + *     * Neither the name of Intel Corporation nor the names of its
> > > + *       contributors may be used to endorse or promote products derived
> > > + *       from this software without specific prior written permission.
> > > + *
> > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > CONTRIBUTORS
> > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > > NOT
> > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > FITNESS FOR
> > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > COPYRIGHT
> > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > INCIDENTAL,
> > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > > NOT
> > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> > > OF USE,
> > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > > AND ON ANY
> > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > > TORT
> > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> > > THE USE
> > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > DAMAGE.
> > > + */
> > > +
> > > +#include <stdint.h>
> > > +#include <inttypes.h>
> > > +#include <unistd.h>
> > > +#include <signal.h>
> > > +#include <getopt.h>
> > > +
> > > +#include <rte_eal.h>
> > > +#include <rte_ethdev.h>
> > > +#include <rte_cycles.h>
> > > +#include <rte_malloc.h>
> > > +#include <rte_debug.h>
> > > +#include <rte_distributor.h>
> > > +
> > > +#include "main.h"
> > > +
> > > +#define RX_RING_SIZE 256
> > > +#define RX_FREE_THRESH 32
> > > +#define RX_PTHRESH 8
> > > +#define RX_HTHRESH 8
> > > +#define RX_WTHRESH 0
> > > +
> > > +#define TX_RING_SIZE 512
> > > +#define TX_FREE_THRESH 32
> > > +#define TX_PTHRESH 32
> > > +#define TX_HTHRESH 0
> > > +#define TX_WTHRESH 0
> > > +#define TX_RSBIT_THRESH 32
> > > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS |
> > > ETH_TXQ_FLAGS_NOVLANOFFL |\
> > > +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP |
> > > \
> > > +	ETH_TXQ_FLAGS_NOXSUMTCP)
> > > +
> > > +#define NUM_MBUFS ((64*1024)-1)
> > > +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) +
> > > RTE_PKTMBUF_HEADROOM)
> > > +#define MBUF_CACHE_SIZE 250
> > > +#define BURST_SIZE 32
> > > +#define RTE_RING_SZ 1024
> > > +
> > > +/* mask of enabled ports */
> > > +static uint32_t enabled_port_mask = 0;
> > > +
> > > +static volatile struct app_stats {
> > > +	struct {
> > > +		uint64_t rx_pkts;
> > > +		uint64_t returned_pkts;
> > > +		uint64_t enqueued_pkts;
> > > +	} rx __rte_cache_aligned;
> > > +
> > > +	struct {
> > > +		uint64_t dequeue_pkts;
> > > +		uint64_t tx_pkts;
> > > +	} tx __rte_cache_aligned;
> > > +} app_stats;
> > > +
> > > +static const struct rte_eth_conf port_conf_default = {
> > > +	.rxmode = {
> > > +		.mq_mode = ETH_MQ_RX_RSS,
> > > +		.max_rx_pkt_len = ETHER_MAX_LEN,
> > > +		.split_hdr_size = 0,
> > > +		.header_split   = 0, /**< Header Split disabled */
> > > +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> > > +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> > > +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> > > +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> > > +	},
> > > +	.txmode = {
> > > +		.mq_mode = ETH_MQ_TX_NONE,
> > > +	},
> > > +	.lpbk_mode = 0,
> > > +	.rx_adv_conf = {
> > > +			.rss_conf = {
> > > +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> > > +					ETH_RSS_IPV4_TCP |
> > > ETH_RSS_IPV4_UDP |
> > > +					ETH_RSS_IPV6_TCP |
> > > ETH_RSS_IPV6_UDP,
> > > +			}
> > > +	},
> > > +};
> > > +
> > > +static const struct rte_eth_rxconf rx_conf_default = {
> > > +	.rx_thresh = {
> > > +		.pthresh = RX_PTHRESH,
> > > +		.hthresh = RX_HTHRESH,
> > > +		.wthresh = RX_WTHRESH,
> > > +	},
> > > +	.rx_free_thresh = RX_FREE_THRESH,
> > > +	.rx_drop_en = 0,
> > > +};
> > > +
> > > +static const struct rte_eth_txconf tx_conf_default = {
> > > +	.tx_thresh = {
> > > +		.pthresh = TX_PTHRESH,
> > > +		.hthresh = TX_HTHRESH,
> > > +		.wthresh = TX_WTHRESH,
> > > +	},
> > > +	.tx_free_thresh = TX_FREE_THRESH,
> > > +	.tx_rs_thresh = TX_RSBIT_THRESH,
> > > +	.txq_flags = TX_Q_FLAGS
> > > +
> > > +};
> > > +
> > > +struct output_buffer {
> > > +	unsigned count;
> > > +	struct rte_mbuf *mbufs[BURST_SIZE]; };
> > > +
> > > +/*
> > > + * Initialises a given port using global settings and with the rx
> > > +buffers
> > > + * coming from the mbuf_pool passed as parameter  */ static inline
> > > +int port_init(uint8_t port, struct rte_mempool *mbuf_pool) {
> > > +	struct rte_eth_conf port_conf = port_conf_default;
> > > +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> > > +	int retval;
> > > +	uint16_t q;
> > > +
> > > +	if (port >= rte_eth_dev_count())
> > > +		return -1;
> > > +
> > > +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> > > +	if (retval != 0)
> > > +		return retval;
> > > +
> > > +	for (q = 0; q < rxRings; q++) {
> > > +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> > > +
> > > 	rte_eth_dev_socket_id(port),
> > > +						&rx_conf_default,
> > > mbuf_pool);
> > > +		if (retval < 0)
> > > +			return retval;
> > > +	}
> > > +
> > > +	for (q = 0; q < txRings; q++) {
> > > +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> > > +
> > > 	rte_eth_dev_socket_id(port),
> > > +						&tx_conf_default);
> > > +		if (retval < 0)
> > > +			return retval;
> > > +	}
> > > +
> > > +	retval  = rte_eth_dev_start(port);
> > > +	if (retval < 0)
> > > +		return retval;
> > > +
> > > +	struct rte_eth_link link;
> > > +	rte_eth_link_get_nowait(port, &link);
> > > +	if (!link.link_status) {
> > > +		sleep(1);
> > > +		rte_eth_link_get_nowait(port, &link);
> > > +	}
> > > +
> > > +	if (!link.link_status) {
> > > +		printf("Link down on port %"PRIu8"\n", port);
> > > +		return 0;
> > > +	}
> > > +
> > > +	struct ether_addr addr;
> > > +	rte_eth_macaddr_get(port, &addr);
> > > +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> > > +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> > > +			(unsigned)port,
> > > +			addr.addr_bytes[0], addr.addr_bytes[1],
> > > +			addr.addr_bytes[2], addr.addr_bytes[3],
> > > +			addr.addr_bytes[4], addr.addr_bytes[5]);
> > > +
> > > +	rte_eth_promiscuous_enable(port);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +struct lcore_params {
> > > +	unsigned worker_id;
> > > +	struct rte_distributor *d;
> > > +	struct rte_ring *r;
> > > +};
> > > +
> > > +static __attribute__((noreturn)) void lcore_rx(struct lcore_params
> > > +*p) {
> > > +	struct rte_distributor *d = p->d;
> > > +	struct rte_ring *r = p->r;
> > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > +	const int socket_id = rte_socket_id();
> > > +	uint8_t port;
> > > +
> > > +	for (port = 0; port < nb_ports; port++) {
> > > +		/* skip ports that are not enabled */
> > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > +			continue;
> > > +
> > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > +			printf("WARNING, port %u is on remote NUMA node
> > > to "
> > > +					"RX thread.\n\tPerformance will not
> > > "
> > > +					"be optimal.\n", port);
> > > +	}
> > > +
> > > +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> > > +	port = 0;
> > > +	for (;;) {
> > > +		/* skip ports that are not enabled */
> > > +		if ((enabled_port_mask & (1 << port)) == 0) {
> > > +			if (++port == nb_ports)
> > > +				port = 0;
> > > +			continue;
> > > +		}
> > > +		struct rte_mbuf *bufs[BURST_SIZE*2];
> > > +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> > > +				BURST_SIZE);
> > > +		app_stats.rx.rx_pkts += nb_rx;
> > > +
> > > +		rte_distributor_process(d, bufs, nb_rx);
> > > +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> > > +				bufs, BURST_SIZE*2);
> > > +		app_stats.rx.returned_pkts += nb_ret;
> > > +		if (unlikely(nb_ret == 0))
> > > +			continue;
> > > +
> > > +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs,
> > > nb_ret);
> > > +		app_stats.rx.enqueued_pkts += sent;
> > > +		if (unlikely(sent < nb_ret)) {
> > > +			printf("Packet loss due to full ring\n");
> >
> > I would remove this printf. If core is too busy to process packets, this may make performance worse.
> > Statistics should reflect this packet loss.
> 
> >Probably use RTE_LOG(DEBUG, ...).
> >That's way you can switch it on/off at compile time.
> 
> By default  LOG_LEVEL is 8 in config/common_linuxapp, hence I see RTE_LOG(DEBUG,...) always works.
> So until unless change the LOG-LEVEL to lesser value, RTE_LOG(DEBUG,..) will be logged ..
> Please let me know if I can go ahead and remove the printf as of now until the LOG_LEVEL is fixed. (or) I have to add some logic to log
> RTE_LOG(DEBUG,..)  only once.

Sorry, I probably wasn't clear enough.
What I am saying -  create something like that inside your app code:

#ifdef XXX_DEBUG
#define XXX_LOG(level, fmt, args...) \
        RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
#else
#define XXX_LOG(level, fmt, args...) do { } while(0)
#endif

And replace your pritnf()s with it.

> 
> >
> > > +			while (sent < nb_ret)
> > > +				rte_pktmbuf_free(bufs[sent++]);
> > > +		}
> > > +		if (++port == nb_ports)
> > > +			port = 0;
> > > +	}
> > > +}
> > > +
> > > +static inline void
> > > +flush_one_port(struct output_buffer *outbuf, uint8_t outp) {
> > > +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> > > +			outbuf->count);
> > > +	app_stats.tx.tx_pkts += nb_tx;
> > > +
> > > +	if (unlikely(nb_tx < outbuf->count)) {
> > > +		printf("Packet loss with tx_burst\n");
> >
> > Same here. This is fine for debugging, but statistics are updated as well, so we do not need this printf.
> >
> > > +		do {
> > > +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> > > +		} while (++nb_tx < outbuf->count);
> > > +	}
> > > +	outbuf->count = 0;
> > > +}
> > > +
> > > +static inline void
> > > +flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
> > > +{
> > > +	uint8_t outp;
> > > +	for (outp = 0; outp < nb_ports; outp++) {
> > > +		/* skip ports that are not enabled */
> > > +		if ((enabled_port_mask & (1 << outp)) == 0)
> > > +			continue;
> > > +
> > > +		if (tx_buffers[outp].count == 0)
> > > +			continue;
> > > +
> > > +		flush_one_port(&tx_buffers[outp], outp);
> > > +	}
> > > +}
> > > +
> > > +static __attribute__((noreturn)) void lcore_tx(struct rte_ring
> > > +*in_r) {
> > > +	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
> > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > +	const int socket_id = rte_socket_id();
> > > +	uint8_t port;
> > > +
> > > +	for (port = 0; port < nb_ports; port++) {
> > > +		/* skip ports that are not enabled */
> > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > +			continue;
> > > +
> > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > +			printf("WARNING, port %u is on remote NUMA node
> > > to "
> > > +					"TX thread.\n\tPerformance will not "
> > > +					"be optimal.\n", port);
> > > +	}
> > > +
> > > +	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
> > > +	for (;;) {
> > > +		for (port = 0; port < nb_ports; port++) {
> > > +			/* skip ports that are not enabled */
> > > +			if ((enabled_port_mask & (1 << port)) == 0)
> > > +				continue;
> > > +
> > > +			struct rte_mbuf *bufs[BURST_SIZE];
> > > +			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
> > > +					(void *)bufs, BURST_SIZE);
> > > +			app_stats.tx.dequeue_pkts += nb_rx;
> > > +
> > > +			/* if we get no traffic, flush anything we have */
> > > +			if (unlikely(nb_rx == 0)) {
> > > +				flush_all_ports(tx_buffers, nb_ports);
> > > +				continue;
> > > +			}
> > > +
> > > +			/* for traffic we receive, queue it up for transmit */
> > > +			uint16_t i;
> > > +			_mm_prefetch(bufs[0], 0);
> > > +			_mm_prefetch(bufs[1], 0);
> > > +			_mm_prefetch(bufs[2], 0);
> > > +			for (i = 0; i < nb_rx; i++) {
> > > +				struct output_buffer *outbuf;
> > > +				uint8_t outp;
> > > +				_mm_prefetch(bufs[i + 3], 0);
> > > +				/* workers should update in_port to hold the
> > > +				 * output port value */
> > > +				outp = bufs[i]->port;
> > > +				/* skip ports that are not enabled */
> > > +				if ((enabled_port_mask & (1 << outp)) == 0)
> > > +					continue;
> > > +
> > > +				outbuf = &tx_buffers[outp];
> > > +				outbuf->mbufs[outbuf->count++] = bufs[i];
> > > +				if (outbuf->count == BURST_SIZE)
> > > +					flush_one_port(outbuf, outp);
> > > +			}
> > > +		}
> > > +	}
> > > +}
> > > +
> > > +
> > > +static __attribute__((noreturn)) void lcore_worker(struct
> > > +lcore_params *p) {
> > > +	struct rte_distributor *d = p->d;
> > > +	const unsigned id = p->worker_id;
> > > +	/* for single port, xor_val will be zero so we won't modify the output
> > > +	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
> > > +	 */
> > > +	const unsigned xor_val = (rte_eth_dev_count() > 1);
> > > +	struct rte_mbuf *buf = NULL;
> > > +
> > > +	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
> > > +	for (;;) {
> > > +		buf = rte_distributor_get_pkt(d, id, buf);
> > > +		buf->port ^= xor_val;
> > > +	}
> > > +}
> > > +
> > > +static void
> > > +int_handler(int sig_num)
> > > +{
> > > +	struct rte_eth_stats eth_stats;
> > > +	unsigned i;
> > > +
> > > +	printf("Exiting on signal %d\n", sig_num);
> > > +
> > > +	printf("\nRX thread stats:\n");
> > > +	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
> > > +	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
> > > +	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
> > > +
> > > +	printf("\nTX thread stats:\n");
> > > +	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
> > > +	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
> > > +
> > > +	for (i = 0; i < rte_eth_dev_count(); i++) {
> > > +		rte_eth_stats_get(i, &eth_stats);
> > > +		printf("\nPort %u stats:\n", i);
> > > +		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
> > > +		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
> > > +		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
> > > +		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
> > > +		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
> > > +	}
> > > +	exit(0);
> > > +}
> > > +
> > > +/* display usage */
> > > +static void
> > > +print_usage(const char *prgname)
> > > +{
> > > +	printf("%s [EAL options] -- -p PORTMASK\n"
> > > +			"  -p PORTMASK: hexadecimal bitmask of ports to
> > > configure\n",
> > > +			prgname);
> > > +}
> > > +
> > > +static int
> > > +parse_portmask(const char *portmask) {
> > > +	char *end = NULL;
> > > +	unsigned long pm;
> > > +
> > > +	/* parse hexadecimal string */
> > > +	pm = strtoul(portmask, &end, 16);
> > > +	if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
> > > +		return -1;
> > > +
> > > +	if (pm == 0)
> > > +		return -1;
> > > +
> > > +	return pm;
> > > +}
> > > +
> > > +/* Parse the argument given in the command line of the application
> > > +*/ static int parse_args(int argc, char **argv) {
> > > +	int opt;
> > > +	char **argvopt;
> > > +	int option_index;
> > > +	char *prgname = argv[0];
> > > +	static struct option lgopts[] = {
> > > +		{NULL, 0, 0, 0}
> > > +	};
> > > +
> > > +	argvopt = argv;
> > > +
> > > +	while ((opt = getopt_long(argc, argvopt, "p:",
> > > +			lgopts, &option_index)) != EOF) {
> > > +
> > > +		switch (opt) {
> > > +			/* portmask */
> > > +			case 'p':
> > > +				enabled_port_mask =
> > > parse_portmask(optarg);
> > > +				if (enabled_port_mask == 0) {
> > > +					printf("invalid portmask\n");
> > > +					print_usage(prgname);
> > > +					return -1;
> > > +				}
> > > +				break;
> > > +
> > > +			default:
> > > +				print_usage(prgname);
> > > +				return -1;
> > > +		}
> > > +	}
> > > +
> > > +if (optind <= 1) {
> > > +	print_usage(prgname);
> > > +	return -1;
> > > +}
> > > +
> > > +	argv[optind-1] = prgname;
> > > +
> > > +	optind = 0; /* reset getopt lib */
> > > +	return 0;
> > > +}
> > > +
> > > +/* Main function, does initialization and calls the per-lcore
> > > +functions */ int MAIN(int argc, char *argv[]) {
> > > +	struct rte_mempool *mbuf_pool;
> > > +	struct rte_distributor *d;
> > > +	struct rte_ring *output_ring;
> > > +	unsigned lcore_id, worker_id = 0;
> > > +	unsigned nb_ports;
> > > +	uint8_t portid;
> > > +	uint8_t nb_ports_available;
> > > +
> > > +	/* catch ctrl-c so we can print on exit */
> > > +	signal(SIGINT, int_handler);
> > > +
> > > +	/* init EAL */
> > > +	int ret = rte_eal_init(argc, argv);
> > > +	if (ret < 0)
> > > +		rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
> > > +	argc -= ret;
> > > +	argv += ret;
> > > +
> > > +	/* parse application arguments (after the EAL ones) */
> > > +	ret = parse_args(argc, argv);
> > > +	if (ret < 0)
> > > +		rte_exit(EXIT_FAILURE, "Invalid distributor parameters\n");
> > > +
> > > +	if (rte_lcore_count() < 3)
> > > +		rte_exit(EXIT_FAILURE, "Error, This application needs at "
> > > +				"least 3 logical cores to run:\n"
> > > +				"1 lcore for packet RX and distribution\n"
> > > +				"1 lcore for packet TX\n"
> > > +				"and at least 1 lcore for worker threads\n");
> > > +
> > > +	if (rte_eal_pci_probe() != 0)
> > > +		rte_exit(EXIT_FAILURE, "Error with PCI probing\n");
> > > +
> > > +	nb_ports = rte_eth_dev_count();
> > > +	if (nb_ports == 0)
> > > +		rte_exit(EXIT_FAILURE, "Error: no ethernet ports
> > > detected\n");
> > > +	if (nb_ports != 1 && (nb_ports & 1))
> > > +		rte_exit(EXIT_FAILURE, "Error: number of ports must be
> > > even, except "
> > > +				"when using a single port\n");
> > > +
> > > +	mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS *
> > > nb_ports,
> > > +			MBUF_SIZE, MBUF_CACHE_SIZE,
> > > +			sizeof(struct rte_pktmbuf_pool_private),
> > > +			rte_pktmbuf_pool_init, NULL,
> > > +			rte_pktmbuf_init, NULL,
> > > +			rte_socket_id(), 0);
> > > +	if (mbuf_pool == NULL)
> > > +		rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
> > > +
> > > +	nb_ports_available = nb_ports;
> > > +
> > > +	/* initialize all ports */
> > > +	for (portid = 0; portid < nb_ports; portid++) {
> > > +		/* skip ports that are not enabled */
> > > +		if ((enabled_port_mask & (1 << portid)) == 0) {
> > > +			printf("\nSkipping disabled port %d\n", portid);
> > > +			nb_ports_available--;
> > > +			continue;
> > > +		}
> > > +		/* init port */
> > > +		printf("Initializing port %u... done\n", (unsigned) portid);
> > > +
> > > +		if (port_init(portid, mbuf_pool) != 0)
> > > +			rte_exit(EXIT_FAILURE, "Cannot initialize port
> > > %"PRIu8"\n",
> > > +					portid);
> > > +	}
> > > +
> > > +	if (!nb_ports_available) {
> > > +		rte_exit(EXIT_FAILURE,
> > > +				"All available ports are disabled. Please set
> > > portmask.\n");
> > > +	}
> > > +
> > > +	d = rte_distributor_create("PKT_DIST", rte_socket_id(),
> > > +			rte_lcore_count() - 2);
> > > +	if (d == NULL)
> > > +		rte_exit(EXIT_FAILURE, "Cannot create distributor\n");
> > > +
> > > +	/* scheduler ring is read only by the transmitter core, but written to
> > > +	 * by multiple threads
> > > +	 */
> > > +	output_ring = rte_ring_create("Output_ring", RTE_RING_SZ,
> > > +			rte_socket_id(), RING_F_SC_DEQ);
> > > +	if (output_ring == NULL)
> > > +		rte_exit(EXIT_FAILURE, "Cannot create output ring\n");
> > > +
> > > +	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
> > > +		if (worker_id == rte_lcore_count() - 2)
> > > +			rte_eal_remote_launch((lcore_function_t
> > > *)lcore_tx,
> > > +					output_ring, lcore_id);
> > > +		else {
> > > +			struct lcore_params *p =
> > > +					rte_malloc(NULL, sizeof(*p), 0);
> > > +			if (!p)
> > > +				rte_panic("malloc failure\n");
> > > +			*p = (struct lcore_params){worker_id, d,
> > > output_ring};
> > > +			rte_eal_remote_launch((lcore_function_t
> > > *)lcore_worker,
> > > +					p, lcore_id);
> > > +		}
> > > +		worker_id++;
> > > +	}
> > > +	/* call lcore_main on master core only */
> > > +	struct lcore_params p = { 0, d, output_ring };
> > > +	lcore_rx(&p);
> > > +	return 0;
> > > +}
> > > diff --git a/examples/distributor_app/main.h
> > > b/examples/distributor_app/main.h new file mode 100644 index
> > > 0000000..2682d15
> > > --- /dev/null
> > > +++ b/examples/distributor_app/main.h
> > > @@ -0,0 +1,46 @@
> > > +/*-
> > > + *   BSD LICENSE
> > > + *
> > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > + *   All rights reserved.
> > > + *
> > > + *   Redistribution and use in source and binary forms, with or without
> > > + *   modification, are permitted provided that the following conditions
> > > + *   are met:
> > > + *
> > > + *     * Redistributions of source code must retain the above copyright
> > > + *       notice, this list of conditions and the following disclaimer.
> > > + *     * Redistributions in binary form must reproduce the above copyright
> > > + *       notice, this list of conditions and the following disclaimer in
> > > + *       the documentation and/or other materials provided with the
> > > + *       distribution.
> > > + *     * Neither the name of Intel Corporation nor the names of its
> > > + *       contributors may be used to endorse or promote products derived
> > > + *       from this software without specific prior written permission.
> > > + *
> > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > CONTRIBUTORS
> > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > > NOT
> > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > FITNESS FOR
> > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > COPYRIGHT
> > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > INCIDENTAL,
> > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > > NOT
> > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> > > OF USE,
> > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > > AND ON ANY
> > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > > TORT
> > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> > > THE USE
> > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > DAMAGE.
> > > + */
> > > +
> > > +#ifndef _MAIN_H_
> > > +#define _MAIN_H_
> > > +
> > > +
> > > +#ifdef RTE_EXEC_ENV_BAREMETAL
> > > +#define MAIN _main
> > > +#else
> > > +#define MAIN main
> > > +#endif
> > > +
> > > +int MAIN(int argc, char *argv[]);
> > > +
> > > +#endif /* ifndef _MAIN_H_ */
> > > --
> > > 1.9.3

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
  2014-09-29 13:06         ` Ananyev, Konstantin
@ 2014-09-29 13:35           ` De Lara Guarch, Pablo
  2014-09-29 14:35             ` Neil Horman
  2014-09-30  8:02             ` Pattan, Reshma
  0 siblings, 2 replies; 38+ messages in thread
From: De Lara Guarch, Pablo @ 2014-09-29 13:35 UTC (permalink / raw)
  To: Ananyev, Konstantin, Pattan, Reshma, dev



> -----Original Message-----
> From: Ananyev, Konstantin
> Sent: Monday, September 29, 2014 2:07 PM
> To: Pattan, Reshma; De Lara Guarch, Pablo; dev@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> 
> 
> 
> > -----Original Message-----
> > From: Pattan, Reshma
> > Sent: Monday, September 29, 2014 1:40 PM
> > To: Ananyev, Konstantin; De Lara Guarch, Pablo; dev@dpdk.org
> > Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> >
> >
> >
> > -----Original Message-----
> > From: Ananyev, Konstantin
> > Sent: Friday, September 26, 2014 4:52 PM
> > To: De Lara Guarch, Pablo; Pattan, Reshma; dev@dpdk.org
> > Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> >
> >
> >
> > > -----Original Message-----
> > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of De Lara Guarch,
> > > Pablo
> > > Sent: Friday, September 26, 2014 4:12 PM
> > > To: Pattan, Reshma; dev@dpdk.org
> > > Subject: Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > >
> > > Hi,
> > >
> > > > -----Original Message-----
> > > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of reshmapa
> > > > Sent: Wednesday, September 24, 2014 3:17 PM
> > > > To: dev@dpdk.org
> > > > Subject: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > > >
> > > > From: Reshma Pattan <reshma.pattan@intel.com>
> > > >
> > > > A new sample app that shows the usage of the distributor library.
> > > > This app works as follows:
> > > >
> > > > * An RX thread runs which pulls packets from each ethernet port in turn
> > > >   and passes those packets to worker using a distributor component.
> > > > * The workers take the packets in turn, and determine the output port
> > > >   for those packets using basic l2forwarding doing an xor on the source
> > > >   port id.
> > > > * The RX thread takes the returned packets from the workers and
> enqueue
> > > >   those packets into an rte_ring structure.
> > > > * A TX thread pulls the packets off the rte_ring structure and then
> > > >   sends each packet out the output port specified previously by the
> > > > worker
> > > > * Command-line option support provided only for portmask.
> > > >
> > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > > > Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
> > > > ---
> > > >  examples/Makefile                 |   1 +
> > > >  examples/distributor_app/Makefile |  57 ++++
> > > >  examples/distributor_app/main.c   | 585
> > > > ++++++++++++++++++++++++++++++++++++++
> > > >  examples/distributor_app/main.h   |  46 +++
> > > >  4 files changed, 689 insertions(+)
> > > >  create mode 100644 examples/distributor_app/Makefile  create mode
> > > > 100644 examples/distributor_app/main.c  create mode 100644
> > > > examples/distributor_app/main.h
> > > >
> > > > diff --git a/examples/Makefile b/examples/Makefile index
> > > > 6245f83..2ba82b0 100644
> > > > --- a/examples/Makefile
> > > > +++ b/examples/Makefile
> > > > @@ -66,5 +66,6 @@ DIRS-y += vhost
> > > >  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen  DIRS-y +=
> vmdq
> > > > DIRS-y += vmdq_dcb
> > > > +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> > > >
> > > >  include $(RTE_SDK)/mk/rte.extsubdir.mk diff --git
> > > > a/examples/distributor_app/Makefile
> > > > b/examples/distributor_app/Makefile
> > > > new file mode 100644
> > > > index 0000000..394785d
> > > > --- /dev/null
> > > > +++ b/examples/distributor_app/Makefile
> > > > @@ -0,0 +1,57 @@
> > > > +#   BSD LICENSE
> > > > +#
> > > > +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > +#   All rights reserved.
> > > > +#
> > > > +#   Redistribution and use in source and binary forms, with or without
> > > > +#   modification, are permitted provided that the following conditions
> > > > +#   are met:
> > > > +#
> > > > +#     * Redistributions of source code must retain the above copyright
> > > > +#       notice, this list of conditions and the following disclaimer.
> > > > +#     * Redistributions in binary form must reproduce the above
> copyright
> > > > +#       notice, this list of conditions and the following disclaimer in
> > > > +#       the documentation and/or other materials provided with the
> > > > +#       distribution.
> > > > +#     * Neither the name of Intel Corporation nor the names of its
> > > > +#       contributors may be used to endorse or promote products
> derived
> > > > +#       from this software without specific prior written permission.
> > > > +#
> > > > +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > > CONTRIBUTORS
> > > > +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
> BUT
> > > > NOT
> > > > +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > > FITNESS FOR
> > > > +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > > COPYRIGHT
> > > > +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > > INCIDENTAL,
> > > > +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> BUT
> > > > NOT
> > > > +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> LOSS
> > > > OF USE,
> > > > +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
> CAUSED
> > > > AND ON ANY
> > > > +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > > > TORT
> > > > +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> OUT OF
> > > > THE USE
> > > > +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > > DAMAGE.
> > > > +
> > > > +ifeq ($(RTE_SDK),)
> > > > +$(error "Please define RTE_SDK environment variable") endif
> > > > +
> > > > +# Default target, can be overriden by command line or environment
> > > > +RTE_TARGET ?= x86_64-default-linuxapp-gcc
> > >
> > > This target is not present anymore. Change it to x86_64-native-linuxapp-
> gcc.
> > >
> > > > +
> > > > +include $(RTE_SDK)/mk/rte.vars.mk
> > > > +
> > > > +# binary name
> > > > +APP = distributor_app
> > > > +
> > > > +# all source are stored in SRCS-y
> > > > +SRCS-y := main.c
> > > > +
> > > > +CFLAGS += $(WERROR_FLAGS)
> > > > +
> > > > +# workaround for a gcc bug with noreturn attribute #
> > > > +http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> > > > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) CFLAGS_main.o +=
> > > > +-Wno-return-type endif
> > > > +
> > > > +EXTRA_CFLAGS += -O3 -Wfatal-errors
> > > > +
> > > > +include $(RTE_SDK)/mk/rte.extapp.mk
> > > > diff --git a/examples/distributor_app/main.c
> > > > b/examples/distributor_app/main.c new file mode 100644 index
> > > > 0000000..628810a
> > > > --- /dev/null
> > > > +++ b/examples/distributor_app/main.c
> > > > @@ -0,0 +1,585 @@
> > > > +/*-
> > > > + *   BSD LICENSE
> > > > + *
> > > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > + *   All rights reserved.
> > > > + *
> > > > + *   Redistribution and use in source and binary forms, with or without
> > > > + *   modification, are permitted provided that the following conditions
> > > > + *   are met:
> > > > + *
> > > > + *     * Redistributions of source code must retain the above copyright
> > > > + *       notice, this list of conditions and the following disclaimer.
> > > > + *     * Redistributions in binary form must reproduce the above
> copyright
> > > > + *       notice, this list of conditions and the following disclaimer in
> > > > + *       the documentation and/or other materials provided with the
> > > > + *       distribution.
> > > > + *     * Neither the name of Intel Corporation nor the names of its
> > > > + *       contributors may be used to endorse or promote products
> derived
> > > > + *       from this software without specific prior written permission.
> > > > + *
> > > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > > CONTRIBUTORS
> > > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
> BUT
> > > > NOT
> > > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > > FITNESS FOR
> > > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > > COPYRIGHT
> > > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > > INCIDENTAL,
> > > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> (INCLUDING, BUT
> > > > NOT
> > > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> LOSS
> > > > OF USE,
> > > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
> CAUSED
> > > > AND ON ANY
> > > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
> OR
> > > > TORT
> > > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> OUT OF
> > > > THE USE
> > > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > > DAMAGE.
> > > > + */
> > > > +
> > > > +#include <stdint.h>
> > > > +#include <inttypes.h>
> > > > +#include <unistd.h>
> > > > +#include <signal.h>
> > > > +#include <getopt.h>
> > > > +
> > > > +#include <rte_eal.h>
> > > > +#include <rte_ethdev.h>
> > > > +#include <rte_cycles.h>
> > > > +#include <rte_malloc.h>
> > > > +#include <rte_debug.h>
> > > > +#include <rte_distributor.h>
> > > > +
> > > > +#include "main.h"
> > > > +
> > > > +#define RX_RING_SIZE 256
> > > > +#define RX_FREE_THRESH 32
> > > > +#define RX_PTHRESH 8
> > > > +#define RX_HTHRESH 8
> > > > +#define RX_WTHRESH 0
> > > > +
> > > > +#define TX_RING_SIZE 512
> > > > +#define TX_FREE_THRESH 32
> > > > +#define TX_PTHRESH 32
> > > > +#define TX_HTHRESH 0
> > > > +#define TX_WTHRESH 0
> > > > +#define TX_RSBIT_THRESH 32
> > > > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS |
> > > > ETH_TXQ_FLAGS_NOVLANOFFL |\
> > > > +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP |
> > > > \
> > > > +	ETH_TXQ_FLAGS_NOXSUMTCP)
> > > > +
> > > > +#define NUM_MBUFS ((64*1024)-1)
> > > > +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) +
> > > > RTE_PKTMBUF_HEADROOM)
> > > > +#define MBUF_CACHE_SIZE 250
> > > > +#define BURST_SIZE 32
> > > > +#define RTE_RING_SZ 1024
> > > > +
> > > > +/* mask of enabled ports */
> > > > +static uint32_t enabled_port_mask = 0;
> > > > +
> > > > +static volatile struct app_stats {
> > > > +	struct {
> > > > +		uint64_t rx_pkts;
> > > > +		uint64_t returned_pkts;
> > > > +		uint64_t enqueued_pkts;
> > > > +	} rx __rte_cache_aligned;
> > > > +
> > > > +	struct {
> > > > +		uint64_t dequeue_pkts;
> > > > +		uint64_t tx_pkts;
> > > > +	} tx __rte_cache_aligned;
> > > > +} app_stats;
> > > > +
> > > > +static const struct rte_eth_conf port_conf_default = {
> > > > +	.rxmode = {
> > > > +		.mq_mode = ETH_MQ_RX_RSS,
> > > > +		.max_rx_pkt_len = ETHER_MAX_LEN,
> > > > +		.split_hdr_size = 0,
> > > > +		.header_split   = 0, /**< Header Split disabled */
> > > > +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> > > > +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> > > > +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> > > > +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> > > > +	},
> > > > +	.txmode = {
> > > > +		.mq_mode = ETH_MQ_TX_NONE,
> > > > +	},
> > > > +	.lpbk_mode = 0,
> > > > +	.rx_adv_conf = {
> > > > +			.rss_conf = {
> > > > +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> > > > +					ETH_RSS_IPV4_TCP |
> > > > ETH_RSS_IPV4_UDP |
> > > > +					ETH_RSS_IPV6_TCP |
> > > > ETH_RSS_IPV6_UDP,
> > > > +			}
> > > > +	},
> > > > +};
> > > > +
> > > > +static const struct rte_eth_rxconf rx_conf_default = {
> > > > +	.rx_thresh = {
> > > > +		.pthresh = RX_PTHRESH,
> > > > +		.hthresh = RX_HTHRESH,
> > > > +		.wthresh = RX_WTHRESH,
> > > > +	},
> > > > +	.rx_free_thresh = RX_FREE_THRESH,
> > > > +	.rx_drop_en = 0,
> > > > +};
> > > > +
> > > > +static const struct rte_eth_txconf tx_conf_default = {
> > > > +	.tx_thresh = {
> > > > +		.pthresh = TX_PTHRESH,
> > > > +		.hthresh = TX_HTHRESH,
> > > > +		.wthresh = TX_WTHRESH,
> > > > +	},
> > > > +	.tx_free_thresh = TX_FREE_THRESH,
> > > > +	.tx_rs_thresh = TX_RSBIT_THRESH,
> > > > +	.txq_flags = TX_Q_FLAGS
> > > > +
> > > > +};
> > > > +
> > > > +struct output_buffer {
> > > > +	unsigned count;
> > > > +	struct rte_mbuf *mbufs[BURST_SIZE]; };
> > > > +
> > > > +/*
> > > > + * Initialises a given port using global settings and with the rx
> > > > +buffers
> > > > + * coming from the mbuf_pool passed as parameter  */ static inline
> > > > +int port_init(uint8_t port, struct rte_mempool *mbuf_pool) {
> > > > +	struct rte_eth_conf port_conf = port_conf_default;
> > > > +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> > > > +	int retval;
> > > > +	uint16_t q;
> > > > +
> > > > +	if (port >= rte_eth_dev_count())
> > > > +		return -1;
> > > > +
> > > > +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> > > > +	if (retval != 0)
> > > > +		return retval;
> > > > +
> > > > +	for (q = 0; q < rxRings; q++) {
> > > > +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> > > > +
> > > > 	rte_eth_dev_socket_id(port),
> > > > +						&rx_conf_default,
> > > > mbuf_pool);
> > > > +		if (retval < 0)
> > > > +			return retval;
> > > > +	}
> > > > +
> > > > +	for (q = 0; q < txRings; q++) {
> > > > +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> > > > +
> > > > 	rte_eth_dev_socket_id(port),
> > > > +						&tx_conf_default);
> > > > +		if (retval < 0)
> > > > +			return retval;
> > > > +	}
> > > > +
> > > > +	retval  = rte_eth_dev_start(port);
> > > > +	if (retval < 0)
> > > > +		return retval;
> > > > +
> > > > +	struct rte_eth_link link;
> > > > +	rte_eth_link_get_nowait(port, &link);
> > > > +	if (!link.link_status) {
> > > > +		sleep(1);
> > > > +		rte_eth_link_get_nowait(port, &link);
> > > > +	}
> > > > +
> > > > +	if (!link.link_status) {
> > > > +		printf("Link down on port %"PRIu8"\n", port);
> > > > +		return 0;
> > > > +	}
> > > > +
> > > > +	struct ether_addr addr;
> > > > +	rte_eth_macaddr_get(port, &addr);
> > > > +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> > > > +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> > > > +			(unsigned)port,
> > > > +			addr.addr_bytes[0], addr.addr_bytes[1],
> > > > +			addr.addr_bytes[2], addr.addr_bytes[3],
> > > > +			addr.addr_bytes[4], addr.addr_bytes[5]);
> > > > +
> > > > +	rte_eth_promiscuous_enable(port);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +struct lcore_params {
> > > > +	unsigned worker_id;
> > > > +	struct rte_distributor *d;
> > > > +	struct rte_ring *r;
> > > > +};
> > > > +
> > > > +static __attribute__((noreturn)) void lcore_rx(struct lcore_params
> > > > +*p) {
> > > > +	struct rte_distributor *d = p->d;
> > > > +	struct rte_ring *r = p->r;
> > > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > > +	const int socket_id = rte_socket_id();
> > > > +	uint8_t port;
> > > > +
> > > > +	for (port = 0; port < nb_ports; port++) {
> > > > +		/* skip ports that are not enabled */
> > > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > > +			continue;
> > > > +
> > > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > > +			printf("WARNING, port %u is on remote NUMA node
> > > > to "
> > > > +					"RX thread.\n\tPerformance will not
> > > > "
> > > > +					"be optimal.\n", port);
> > > > +	}
> > > > +
> > > > +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> > > > +	port = 0;
> > > > +	for (;;) {
> > > > +		/* skip ports that are not enabled */
> > > > +		if ((enabled_port_mask & (1 << port)) == 0) {
> > > > +			if (++port == nb_ports)
> > > > +				port = 0;
> > > > +			continue;
> > > > +		}
> > > > +		struct rte_mbuf *bufs[BURST_SIZE*2];
> > > > +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> > > > +				BURST_SIZE);
> > > > +		app_stats.rx.rx_pkts += nb_rx;
> > > > +
> > > > +		rte_distributor_process(d, bufs, nb_rx);
> > > > +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> > > > +				bufs, BURST_SIZE*2);
> > > > +		app_stats.rx.returned_pkts += nb_ret;
> > > > +		if (unlikely(nb_ret == 0))
> > > > +			continue;
> > > > +
> > > > +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs,
> > > > nb_ret);
> > > > +		app_stats.rx.enqueued_pkts += sent;
> > > > +		if (unlikely(sent < nb_ret)) {
> > > > +			printf("Packet loss due to full ring\n");
> > >
> > > I would remove this printf. If core is too busy to process packets, this may
> make performance worse.
> > > Statistics should reflect this packet loss.
> >
> > >Probably use RTE_LOG(DEBUG, ...).
> > >That's way you can switch it on/off at compile time.
> >
> > By default  LOG_LEVEL is 8 in config/common_linuxapp, hence I see
> RTE_LOG(DEBUG,...) always works.
> > So until unless change the LOG-LEVEL to lesser value, RTE_LOG(DEBUG,..)
> will be logged ..
> > Please let me know if I can go ahead and remove the printf as of now until
> the LOG_LEVEL is fixed. (or) I have to add some logic to log
> > RTE_LOG(DEBUG,..)  only once.
> 
> Sorry, I probably wasn't clear enough.
> What I am saying -  create something like that inside your app code:
> 
> #ifdef XXX_DEBUG
> #define XXX_LOG(level, fmt, args...) \
>         RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
> #else
> #define XXX_LOG(level, fmt, args...) do { } while(0)
> #endif
> 
> And replace your pritnf()s with it.

I think we should make some changes in some logs in DPDK, and change the default log level to be INFO or less, so we could use the DEBUG level for things like this, but anyway, that would be another patch that I am thinking to submit some other day.
Anyway, for this one, this option could work, but still that message may be shown hundreds of thousands of times per second, considering that CPU is overloaded. So, should we include something like a flag here, so message is shown just once?
I know that this will only be used when DEBUG is enabled, but still that could flood the screen, as it is in an infinite loop.

> 
> >
> > >
> > > > +			while (sent < nb_ret)
> > > > +				rte_pktmbuf_free(bufs[sent++]);
> > > > +		}
> > > > +		if (++port == nb_ports)
> > > > +			port = 0;
> > > > +	}
> > > > +}
> > > > +
> > > > +static inline void
> > > > +flush_one_port(struct output_buffer *outbuf, uint8_t outp) {
> > > > +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> > > > +			outbuf->count);
> > > > +	app_stats.tx.tx_pkts += nb_tx;
> > > > +
> > > > +	if (unlikely(nb_tx < outbuf->count)) {
> > > > +		printf("Packet loss with tx_burst\n");
> > >
> > > Same here. This is fine for debugging, but statistics are updated as well,
> so we do not need this printf.
> > >
> > > > +		do {
> > > > +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> > > > +		} while (++nb_tx < outbuf->count);
> > > > +	}
> > > > +	outbuf->count = 0;
> > > > +}
> > > > +

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
  2014-09-29 13:35           ` De Lara Guarch, Pablo
@ 2014-09-29 14:35             ` Neil Horman
  2014-09-30  8:02             ` Pattan, Reshma
  1 sibling, 0 replies; 38+ messages in thread
From: Neil Horman @ 2014-09-29 14:35 UTC (permalink / raw)
  To: De Lara Guarch, Pablo; +Cc: dev

On Mon, Sep 29, 2014 at 01:35:21PM +0000, De Lara Guarch, Pablo wrote:
> 
> 
> > -----Original Message-----
> > From: Ananyev, Konstantin
> > Sent: Monday, September 29, 2014 2:07 PM
> > To: Pattan, Reshma; De Lara Guarch, Pablo; dev@dpdk.org
> > Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > 
> > 
> > 
> > > -----Original Message-----
> > > From: Pattan, Reshma
> > > Sent: Monday, September 29, 2014 1:40 PM
> > > To: Ananyev, Konstantin; De Lara Guarch, Pablo; dev@dpdk.org
> > > Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Ananyev, Konstantin
> > > Sent: Friday, September 26, 2014 4:52 PM
> > > To: De Lara Guarch, Pablo; Pattan, Reshma; dev@dpdk.org
> > > Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of De Lara Guarch,
> > > > Pablo
> > > > Sent: Friday, September 26, 2014 4:12 PM
> > > > To: Pattan, Reshma; dev@dpdk.org
> > > > Subject: Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > > >
> > > > Hi,
> > > >
> > > > > -----Original Message-----
> > > > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of reshmapa
> > > > > Sent: Wednesday, September 24, 2014 3:17 PM
> > > > > To: dev@dpdk.org
> > > > > Subject: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > > > >
> > > > > From: Reshma Pattan <reshma.pattan@intel.com>
> > > > >
> > > > > A new sample app that shows the usage of the distributor library.
> > > > > This app works as follows:
> > > > >
> > > > > * An RX thread runs which pulls packets from each ethernet port in turn
> > > > >   and passes those packets to worker using a distributor component.
> > > > > * The workers take the packets in turn, and determine the output port
> > > > >   for those packets using basic l2forwarding doing an xor on the source
> > > > >   port id.
> > > > > * The RX thread takes the returned packets from the workers and
> > enqueue
> > > > >   those packets into an rte_ring structure.
> > > > > * A TX thread pulls the packets off the rte_ring structure and then
> > > > >   sends each packet out the output port specified previously by the
> > > > > worker
> > > > > * Command-line option support provided only for portmask.
> > > > >
> > > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > > > > Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
> > > > > ---
> > > > >  examples/Makefile                 |   1 +
> > > > >  examples/distributor_app/Makefile |  57 ++++
> > > > >  examples/distributor_app/main.c   | 585
> > > > > ++++++++++++++++++++++++++++++++++++++
> > > > >  examples/distributor_app/main.h   |  46 +++
> > > > >  4 files changed, 689 insertions(+)
> > > > >  create mode 100644 examples/distributor_app/Makefile  create mode
> > > > > 100644 examples/distributor_app/main.c  create mode 100644
> > > > > examples/distributor_app/main.h
> > > > >
> > > > > diff --git a/examples/Makefile b/examples/Makefile index
> > > > > 6245f83..2ba82b0 100644
> > > > > --- a/examples/Makefile
> > > > > +++ b/examples/Makefile
> > > > > @@ -66,5 +66,6 @@ DIRS-y += vhost
> > > > >  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen  DIRS-y +=
> > vmdq
> > > > > DIRS-y += vmdq_dcb
> > > > > +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> > > > >
> > > > >  include $(RTE_SDK)/mk/rte.extsubdir.mk diff --git
> > > > > a/examples/distributor_app/Makefile
> > > > > b/examples/distributor_app/Makefile
> > > > > new file mode 100644
> > > > > index 0000000..394785d
> > > > > --- /dev/null
> > > > > +++ b/examples/distributor_app/Makefile
> > > > > @@ -0,0 +1,57 @@
> > > > > +#   BSD LICENSE
> > > > > +#
> > > > > +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > > +#   All rights reserved.
> > > > > +#
> > > > > +#   Redistribution and use in source and binary forms, with or without
> > > > > +#   modification, are permitted provided that the following conditions
> > > > > +#   are met:
> > > > > +#
> > > > > +#     * Redistributions of source code must retain the above copyright
> > > > > +#       notice, this list of conditions and the following disclaimer.
> > > > > +#     * Redistributions in binary form must reproduce the above
> > copyright
> > > > > +#       notice, this list of conditions and the following disclaimer in
> > > > > +#       the documentation and/or other materials provided with the
> > > > > +#       distribution.
> > > > > +#     * Neither the name of Intel Corporation nor the names of its
> > > > > +#       contributors may be used to endorse or promote products
> > derived
> > > > > +#       from this software without specific prior written permission.
> > > > > +#
> > > > > +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > > > CONTRIBUTORS
> > > > > +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
> > BUT
> > > > > NOT
> > > > > +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > > > FITNESS FOR
> > > > > +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > > > COPYRIGHT
> > > > > +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > > > INCIDENTAL,
> > > > > +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> > BUT
> > > > > NOT
> > > > > +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> > LOSS
> > > > > OF USE,
> > > > > +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
> > CAUSED
> > > > > AND ON ANY
> > > > > +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > > > > TORT
> > > > > +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> > OUT OF
> > > > > THE USE
> > > > > +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > > > DAMAGE.
> > > > > +
> > > > > +ifeq ($(RTE_SDK),)
> > > > > +$(error "Please define RTE_SDK environment variable") endif
> > > > > +
> > > > > +# Default target, can be overriden by command line or environment
> > > > > +RTE_TARGET ?= x86_64-default-linuxapp-gcc
> > > >
> > > > This target is not present anymore. Change it to x86_64-native-linuxapp-
> > gcc.
> > > >
> > > > > +
> > > > > +include $(RTE_SDK)/mk/rte.vars.mk
> > > > > +
> > > > > +# binary name
> > > > > +APP = distributor_app
> > > > > +
> > > > > +# all source are stored in SRCS-y
> > > > > +SRCS-y := main.c
> > > > > +
> > > > > +CFLAGS += $(WERROR_FLAGS)
> > > > > +
> > > > > +# workaround for a gcc bug with noreturn attribute #
> > > > > +http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> > > > > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) CFLAGS_main.o +=
> > > > > +-Wno-return-type endif
> > > > > +
> > > > > +EXTRA_CFLAGS += -O3 -Wfatal-errors
> > > > > +
> > > > > +include $(RTE_SDK)/mk/rte.extapp.mk
> > > > > diff --git a/examples/distributor_app/main.c
> > > > > b/examples/distributor_app/main.c new file mode 100644 index
> > > > > 0000000..628810a
> > > > > --- /dev/null
> > > > > +++ b/examples/distributor_app/main.c
> > > > > @@ -0,0 +1,585 @@
> > > > > +/*-
> > > > > + *   BSD LICENSE
> > > > > + *
> > > > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > > + *   All rights reserved.
> > > > > + *
> > > > > + *   Redistribution and use in source and binary forms, with or without
> > > > > + *   modification, are permitted provided that the following conditions
> > > > > + *   are met:
> > > > > + *
> > > > > + *     * Redistributions of source code must retain the above copyright
> > > > > + *       notice, this list of conditions and the following disclaimer.
> > > > > + *     * Redistributions in binary form must reproduce the above
> > copyright
> > > > > + *       notice, this list of conditions and the following disclaimer in
> > > > > + *       the documentation and/or other materials provided with the
> > > > > + *       distribution.
> > > > > + *     * Neither the name of Intel Corporation nor the names of its
> > > > > + *       contributors may be used to endorse or promote products
> > derived
> > > > > + *       from this software without specific prior written permission.
> > > > > + *
> > > > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > > > CONTRIBUTORS
> > > > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
> > BUT
> > > > > NOT
> > > > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > > > FITNESS FOR
> > > > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > > > COPYRIGHT
> > > > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > > > INCIDENTAL,
> > > > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> > (INCLUDING, BUT
> > > > > NOT
> > > > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> > LOSS
> > > > > OF USE,
> > > > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
> > CAUSED
> > > > > AND ON ANY
> > > > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
> > OR
> > > > > TORT
> > > > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> > OUT OF
> > > > > THE USE
> > > > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > > > DAMAGE.
> > > > > + */
> > > > > +
> > > > > +#include <stdint.h>
> > > > > +#include <inttypes.h>
> > > > > +#include <unistd.h>
> > > > > +#include <signal.h>
> > > > > +#include <getopt.h>
> > > > > +
> > > > > +#include <rte_eal.h>
> > > > > +#include <rte_ethdev.h>
> > > > > +#include <rte_cycles.h>
> > > > > +#include <rte_malloc.h>
> > > > > +#include <rte_debug.h>
> > > > > +#include <rte_distributor.h>
> > > > > +
> > > > > +#include "main.h"
> > > > > +
> > > > > +#define RX_RING_SIZE 256
> > > > > +#define RX_FREE_THRESH 32
> > > > > +#define RX_PTHRESH 8
> > > > > +#define RX_HTHRESH 8
> > > > > +#define RX_WTHRESH 0
> > > > > +
> > > > > +#define TX_RING_SIZE 512
> > > > > +#define TX_FREE_THRESH 32
> > > > > +#define TX_PTHRESH 32
> > > > > +#define TX_HTHRESH 0
> > > > > +#define TX_WTHRESH 0
> > > > > +#define TX_RSBIT_THRESH 32
> > > > > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS |
> > > > > ETH_TXQ_FLAGS_NOVLANOFFL |\
> > > > > +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP |
> > > > > \
> > > > > +	ETH_TXQ_FLAGS_NOXSUMTCP)
> > > > > +
> > > > > +#define NUM_MBUFS ((64*1024)-1)
> > > > > +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) +
> > > > > RTE_PKTMBUF_HEADROOM)
> > > > > +#define MBUF_CACHE_SIZE 250
> > > > > +#define BURST_SIZE 32
> > > > > +#define RTE_RING_SZ 1024
> > > > > +
> > > > > +/* mask of enabled ports */
> > > > > +static uint32_t enabled_port_mask = 0;
> > > > > +
> > > > > +static volatile struct app_stats {
> > > > > +	struct {
> > > > > +		uint64_t rx_pkts;
> > > > > +		uint64_t returned_pkts;
> > > > > +		uint64_t enqueued_pkts;
> > > > > +	} rx __rte_cache_aligned;
> > > > > +
> > > > > +	struct {
> > > > > +		uint64_t dequeue_pkts;
> > > > > +		uint64_t tx_pkts;
> > > > > +	} tx __rte_cache_aligned;
> > > > > +} app_stats;
> > > > > +
> > > > > +static const struct rte_eth_conf port_conf_default = {
> > > > > +	.rxmode = {
> > > > > +		.mq_mode = ETH_MQ_RX_RSS,
> > > > > +		.max_rx_pkt_len = ETHER_MAX_LEN,
> > > > > +		.split_hdr_size = 0,
> > > > > +		.header_split   = 0, /**< Header Split disabled */
> > > > > +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> > > > > +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> > > > > +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> > > > > +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> > > > > +	},
> > > > > +	.txmode = {
> > > > > +		.mq_mode = ETH_MQ_TX_NONE,
> > > > > +	},
> > > > > +	.lpbk_mode = 0,
> > > > > +	.rx_adv_conf = {
> > > > > +			.rss_conf = {
> > > > > +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> > > > > +					ETH_RSS_IPV4_TCP |
> > > > > ETH_RSS_IPV4_UDP |
> > > > > +					ETH_RSS_IPV6_TCP |
> > > > > ETH_RSS_IPV6_UDP,
> > > > > +			}
> > > > > +	},
> > > > > +};
> > > > > +
> > > > > +static const struct rte_eth_rxconf rx_conf_default = {
> > > > > +	.rx_thresh = {
> > > > > +		.pthresh = RX_PTHRESH,
> > > > > +		.hthresh = RX_HTHRESH,
> > > > > +		.wthresh = RX_WTHRESH,
> > > > > +	},
> > > > > +	.rx_free_thresh = RX_FREE_THRESH,
> > > > > +	.rx_drop_en = 0,
> > > > > +};
> > > > > +
> > > > > +static const struct rte_eth_txconf tx_conf_default = {
> > > > > +	.tx_thresh = {
> > > > > +		.pthresh = TX_PTHRESH,
> > > > > +		.hthresh = TX_HTHRESH,
> > > > > +		.wthresh = TX_WTHRESH,
> > > > > +	},
> > > > > +	.tx_free_thresh = TX_FREE_THRESH,
> > > > > +	.tx_rs_thresh = TX_RSBIT_THRESH,
> > > > > +	.txq_flags = TX_Q_FLAGS
> > > > > +
> > > > > +};
> > > > > +
> > > > > +struct output_buffer {
> > > > > +	unsigned count;
> > > > > +	struct rte_mbuf *mbufs[BURST_SIZE]; };
> > > > > +
> > > > > +/*
> > > > > + * Initialises a given port using global settings and with the rx
> > > > > +buffers
> > > > > + * coming from the mbuf_pool passed as parameter  */ static inline
> > > > > +int port_init(uint8_t port, struct rte_mempool *mbuf_pool) {
> > > > > +	struct rte_eth_conf port_conf = port_conf_default;
> > > > > +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> > > > > +	int retval;
> > > > > +	uint16_t q;
> > > > > +
> > > > > +	if (port >= rte_eth_dev_count())
> > > > > +		return -1;
> > > > > +
> > > > > +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> > > > > +	if (retval != 0)
> > > > > +		return retval;
> > > > > +
> > > > > +	for (q = 0; q < rxRings; q++) {
> > > > > +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> > > > > +
> > > > > 	rte_eth_dev_socket_id(port),
> > > > > +						&rx_conf_default,
> > > > > mbuf_pool);
> > > > > +		if (retval < 0)
> > > > > +			return retval;
> > > > > +	}
> > > > > +
> > > > > +	for (q = 0; q < txRings; q++) {
> > > > > +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> > > > > +
> > > > > 	rte_eth_dev_socket_id(port),
> > > > > +						&tx_conf_default);
> > > > > +		if (retval < 0)
> > > > > +			return retval;
> > > > > +	}
> > > > > +
> > > > > +	retval  = rte_eth_dev_start(port);
> > > > > +	if (retval < 0)
> > > > > +		return retval;
> > > > > +
> > > > > +	struct rte_eth_link link;
> > > > > +	rte_eth_link_get_nowait(port, &link);
> > > > > +	if (!link.link_status) {
> > > > > +		sleep(1);
> > > > > +		rte_eth_link_get_nowait(port, &link);
> > > > > +	}
> > > > > +
> > > > > +	if (!link.link_status) {
> > > > > +		printf("Link down on port %"PRIu8"\n", port);
> > > > > +		return 0;
> > > > > +	}
> > > > > +
> > > > > +	struct ether_addr addr;
> > > > > +	rte_eth_macaddr_get(port, &addr);
> > > > > +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> > > > > +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> > > > > +			(unsigned)port,
> > > > > +			addr.addr_bytes[0], addr.addr_bytes[1],
> > > > > +			addr.addr_bytes[2], addr.addr_bytes[3],
> > > > > +			addr.addr_bytes[4], addr.addr_bytes[5]);
> > > > > +
> > > > > +	rte_eth_promiscuous_enable(port);
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +struct lcore_params {
> > > > > +	unsigned worker_id;
> > > > > +	struct rte_distributor *d;
> > > > > +	struct rte_ring *r;
> > > > > +};
> > > > > +
> > > > > +static __attribute__((noreturn)) void lcore_rx(struct lcore_params
> > > > > +*p) {
> > > > > +	struct rte_distributor *d = p->d;
> > > > > +	struct rte_ring *r = p->r;
> > > > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > > > +	const int socket_id = rte_socket_id();
> > > > > +	uint8_t port;
> > > > > +
> > > > > +	for (port = 0; port < nb_ports; port++) {
> > > > > +		/* skip ports that are not enabled */
> > > > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > > > +			continue;
> > > > > +
> > > > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > > > +			printf("WARNING, port %u is on remote NUMA node
> > > > > to "
> > > > > +					"RX thread.\n\tPerformance will not
> > > > > "
> > > > > +					"be optimal.\n", port);
> > > > > +	}
> > > > > +
> > > > > +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> > > > > +	port = 0;
> > > > > +	for (;;) {
> > > > > +		/* skip ports that are not enabled */
> > > > > +		if ((enabled_port_mask & (1 << port)) == 0) {
> > > > > +			if (++port == nb_ports)
> > > > > +				port = 0;
> > > > > +			continue;
> > > > > +		}
> > > > > +		struct rte_mbuf *bufs[BURST_SIZE*2];
> > > > > +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> > > > > +				BURST_SIZE);
> > > > > +		app_stats.rx.rx_pkts += nb_rx;
> > > > > +
> > > > > +		rte_distributor_process(d, bufs, nb_rx);
> > > > > +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> > > > > +				bufs, BURST_SIZE*2);
> > > > > +		app_stats.rx.returned_pkts += nb_ret;
> > > > > +		if (unlikely(nb_ret == 0))
> > > > > +			continue;
> > > > > +
> > > > > +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs,
> > > > > nb_ret);
> > > > > +		app_stats.rx.enqueued_pkts += sent;
> > > > > +		if (unlikely(sent < nb_ret)) {
> > > > > +			printf("Packet loss due to full ring\n");
> > > >
> > > > I would remove this printf. If core is too busy to process packets, this may
> > make performance worse.
> > > > Statistics should reflect this packet loss.
> > >
> > > >Probably use RTE_LOG(DEBUG, ...).
> > > >That's way you can switch it on/off at compile time.
> > >
> > > By default  LOG_LEVEL is 8 in config/common_linuxapp, hence I see
> > RTE_LOG(DEBUG,...) always works.
> > > So until unless change the LOG-LEVEL to lesser value, RTE_LOG(DEBUG,..)
> > will be logged ..
> > > Please let me know if I can go ahead and remove the printf as of now until
> > the LOG_LEVEL is fixed. (or) I have to add some logic to log
> > > RTE_LOG(DEBUG,..)  only once.
> > 
> > Sorry, I probably wasn't clear enough.
> > What I am saying -  create something like that inside your app code:
> > 
> > #ifdef XXX_DEBUG
> > #define XXX_LOG(level, fmt, args...) \
> >         RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
> > #else
> > #define XXX_LOG(level, fmt, args...) do { } while(0)
> > #endif
> > 
> > And replace your pritnf()s with it.
> 
> I think we should make some changes in some logs in DPDK, and change the default log level to be INFO or less, so we could use the DEBUG level for things like this, but anyway, that would be another patch that I am thinking to submit some other day.
> Anyway, for this one, this option could work, but still that message may be shown hundreds of thousands of times per second, considering that CPU is overloaded. So, should we include something like a flag here, so message is shown just once?
> I know that this will only be used when DEBUG is enabled, but still that could flood the screen, as it is in an infinite loop.
May you need a ratelimiting function?
Neil

> 
> > 
> > >
> > > >
> > > > > +			while (sent < nb_ret)
> > > > > +				rte_pktmbuf_free(bufs[sent++]);
> > > > > +		}
> > > > > +		if (++port == nb_ports)
> > > > > +			port = 0;
> > > > > +	}
> > > > > +}
> > > > > +
> > > > > +static inline void
> > > > > +flush_one_port(struct output_buffer *outbuf, uint8_t outp) {
> > > > > +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> > > > > +			outbuf->count);
> > > > > +	app_stats.tx.tx_pkts += nb_tx;
> > > > > +
> > > > > +	if (unlikely(nb_tx < outbuf->count)) {
> > > > > +		printf("Packet loss with tx_burst\n");
> > > >
> > > > Same here. This is fine for debugging, but statistics are updated as well,
> > so we do not need this printf.
> > > >
> > > > > +		do {
> > > > > +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> > > > > +		} while (++nb_tx < outbuf->count);
> > > > > +	}
> > > > > +	outbuf->count = 0;
> > > > > +}
> > > > > +
> 
> 

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
  2014-09-29 13:35           ` De Lara Guarch, Pablo
  2014-09-29 14:35             ` Neil Horman
@ 2014-09-30  8:02             ` Pattan, Reshma
  2014-09-30  9:21               ` Ananyev, Konstantin
  1 sibling, 1 reply; 38+ messages in thread
From: Pattan, Reshma @ 2014-09-30  8:02 UTC (permalink / raw)
  To: Ananyev, Konstantin, De Lara Guarch, Pablo, dev

Hi Konstantin,

Any comments on below Pablos comment? If so please provide.

Thanks,
Reshma



-----Original Message-----
From: De Lara Guarch, Pablo 
Sent: Monday, September 29, 2014 2:35 PM
To: Ananyev, Konstantin; Pattan, Reshma; dev@dpdk.org
Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app



> -----Original Message-----
> From: Ananyev, Konstantin
> Sent: Monday, September 29, 2014 2:07 PM
> To: Pattan, Reshma; De Lara Guarch, Pablo; dev@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> 
> 
> 
> > -----Original Message-----
> > From: Pattan, Reshma
> > Sent: Monday, September 29, 2014 1:40 PM
> > To: Ananyev, Konstantin; De Lara Guarch, Pablo; dev@dpdk.org
> > Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> >
> >
> >
> > -----Original Message-----
> > From: Ananyev, Konstantin
> > Sent: Friday, September 26, 2014 4:52 PM
> > To: De Lara Guarch, Pablo; Pattan, Reshma; dev@dpdk.org
> > Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> >
> >
> >
> > > -----Original Message-----
> > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of De Lara 
> > > Guarch, Pablo
> > > Sent: Friday, September 26, 2014 4:12 PM
> > > To: Pattan, Reshma; dev@dpdk.org
> > > Subject: Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > >
> > > Hi,
> > >
> > > > -----Original Message-----
> > > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of reshmapa
> > > > Sent: Wednesday, September 24, 2014 3:17 PM
> > > > To: dev@dpdk.org
> > > > Subject: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > > >
> > > > From: Reshma Pattan <reshma.pattan@intel.com>
> > > >
> > > > A new sample app that shows the usage of the distributor library.
> > > > This app works as follows:
> > > >
> > > > * An RX thread runs which pulls packets from each ethernet port in turn
> > > >   and passes those packets to worker using a distributor component.
> > > > * The workers take the packets in turn, and determine the output port
> > > >   for those packets using basic l2forwarding doing an xor on the source
> > > >   port id.
> > > > * The RX thread takes the returned packets from the workers and
> enqueue
> > > >   those packets into an rte_ring structure.
> > > > * A TX thread pulls the packets off the rte_ring structure and then
> > > >   sends each packet out the output port specified previously by 
> > > > the worker
> > > > * Command-line option support provided only for portmask.
> > > >
> > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > > > Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
> > > > ---
> > > >  examples/Makefile                 |   1 +
> > > >  examples/distributor_app/Makefile |  57 ++++
> > > >  examples/distributor_app/main.c   | 585
> > > > ++++++++++++++++++++++++++++++++++++++
> > > >  examples/distributor_app/main.h   |  46 +++
> > > >  4 files changed, 689 insertions(+)  create mode 100644 
> > > > examples/distributor_app/Makefile  create mode
> > > > 100644 examples/distributor_app/main.c  create mode 100644 
> > > > examples/distributor_app/main.h
> > > >
> > > > diff --git a/examples/Makefile b/examples/Makefile index
> > > > 6245f83..2ba82b0 100644
> > > > --- a/examples/Makefile
> > > > +++ b/examples/Makefile
> > > > @@ -66,5 +66,6 @@ DIRS-y += vhost
> > > >  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen  DIRS-y +=
> vmdq
> > > > DIRS-y += vmdq_dcb
> > > > +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> > > >
> > > >  include $(RTE_SDK)/mk/rte.extsubdir.mk diff --git 
> > > > a/examples/distributor_app/Makefile
> > > > b/examples/distributor_app/Makefile
> > > > new file mode 100644
> > > > index 0000000..394785d
> > > > --- /dev/null
> > > > +++ b/examples/distributor_app/Makefile
> > > > @@ -0,0 +1,57 @@
> > > > +#   BSD LICENSE
> > > > +#
> > > > +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > +#   All rights reserved.
> > > > +#
> > > > +#   Redistribution and use in source and binary forms, with or without
> > > > +#   modification, are permitted provided that the following conditions
> > > > +#   are met:
> > > > +#
> > > > +#     * Redistributions of source code must retain the above copyright
> > > > +#       notice, this list of conditions and the following disclaimer.
> > > > +#     * Redistributions in binary form must reproduce the above
> copyright
> > > > +#       notice, this list of conditions and the following disclaimer in
> > > > +#       the documentation and/or other materials provided with the
> > > > +#       distribution.
> > > > +#     * Neither the name of Intel Corporation nor the names of its
> > > > +#       contributors may be used to endorse or promote products
> derived
> > > > +#       from this software without specific prior written permission.
> > > > +#
> > > > +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > > CONTRIBUTORS
> > > > +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
> BUT
> > > > NOT
> > > > +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > > FITNESS FOR
> > > > +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > > COPYRIGHT
> > > > +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > > INCIDENTAL,
> > > > +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> BUT
> > > > NOT
> > > > +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> LOSS
> > > > OF USE,
> > > > +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
> CAUSED
> > > > AND ON ANY
> > > > +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > > > TORT
> > > > +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> OUT OF
> > > > THE USE
> > > > +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > > DAMAGE.
> > > > +
> > > > +ifeq ($(RTE_SDK),)
> > > > +$(error "Please define RTE_SDK environment variable") endif
> > > > +
> > > > +# Default target, can be overriden by command line or 
> > > > +environment RTE_TARGET ?= x86_64-default-linuxapp-gcc
> > >
> > > This target is not present anymore. Change it to 
> > > x86_64-native-linuxapp-
> gcc.
> > >
> > > > +
> > > > +include $(RTE_SDK)/mk/rte.vars.mk
> > > > +
> > > > +# binary name
> > > > +APP = distributor_app
> > > > +
> > > > +# all source are stored in SRCS-y SRCS-y := main.c
> > > > +
> > > > +CFLAGS += $(WERROR_FLAGS)
> > > > +
> > > > +# workaround for a gcc bug with noreturn attribute #
> > > > +http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> > > > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) CFLAGS_main.o += 
> > > > +-Wno-return-type endif
> > > > +
> > > > +EXTRA_CFLAGS += -O3 -Wfatal-errors
> > > > +
> > > > +include $(RTE_SDK)/mk/rte.extapp.mk
> > > > diff --git a/examples/distributor_app/main.c 
> > > > b/examples/distributor_app/main.c new file mode 100644 index 
> > > > 0000000..628810a
> > > > --- /dev/null
> > > > +++ b/examples/distributor_app/main.c
> > > > @@ -0,0 +1,585 @@
> > > > +/*-
> > > > + *   BSD LICENSE
> > > > + *
> > > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > + *   All rights reserved.
> > > > + *
> > > > + *   Redistribution and use in source and binary forms, with or without
> > > > + *   modification, are permitted provided that the following conditions
> > > > + *   are met:
> > > > + *
> > > > + *     * Redistributions of source code must retain the above copyright
> > > > + *       notice, this list of conditions and the following disclaimer.
> > > > + *     * Redistributions in binary form must reproduce the above
> copyright
> > > > + *       notice, this list of conditions and the following disclaimer in
> > > > + *       the documentation and/or other materials provided with the
> > > > + *       distribution.
> > > > + *     * Neither the name of Intel Corporation nor the names of its
> > > > + *       contributors may be used to endorse or promote products
> derived
> > > > + *       from this software without specific prior written permission.
> > > > + *
> > > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > > CONTRIBUTORS
> > > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
> BUT
> > > > NOT
> > > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > > FITNESS FOR
> > > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > > COPYRIGHT
> > > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > > INCIDENTAL,
> > > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> (INCLUDING, BUT
> > > > NOT
> > > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> LOSS
> > > > OF USE,
> > > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
> CAUSED
> > > > AND ON ANY
> > > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
> OR
> > > > TORT
> > > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> OUT OF
> > > > THE USE
> > > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > > DAMAGE.
> > > > + */
> > > > +
> > > > +#include <stdint.h>
> > > > +#include <inttypes.h>
> > > > +#include <unistd.h>
> > > > +#include <signal.h>
> > > > +#include <getopt.h>
> > > > +
> > > > +#include <rte_eal.h>
> > > > +#include <rte_ethdev.h>
> > > > +#include <rte_cycles.h>
> > > > +#include <rte_malloc.h>
> > > > +#include <rte_debug.h>
> > > > +#include <rte_distributor.h>
> > > > +
> > > > +#include "main.h"
> > > > +
> > > > +#define RX_RING_SIZE 256
> > > > +#define RX_FREE_THRESH 32
> > > > +#define RX_PTHRESH 8
> > > > +#define RX_HTHRESH 8
> > > > +#define RX_WTHRESH 0
> > > > +
> > > > +#define TX_RING_SIZE 512
> > > > +#define TX_FREE_THRESH 32
> > > > +#define TX_PTHRESH 32
> > > > +#define TX_HTHRESH 0
> > > > +#define TX_WTHRESH 0
> > > > +#define TX_RSBIT_THRESH 32
> > > > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS |
> > > > ETH_TXQ_FLAGS_NOVLANOFFL |\
> > > > +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP |
> > > > \
> > > > +	ETH_TXQ_FLAGS_NOXSUMTCP)
> > > > +
> > > > +#define NUM_MBUFS ((64*1024)-1) #define MBUF_SIZE (2048 + 
> > > > +sizeof(struct rte_mbuf) +
> > > > RTE_PKTMBUF_HEADROOM)
> > > > +#define MBUF_CACHE_SIZE 250
> > > > +#define BURST_SIZE 32
> > > > +#define RTE_RING_SZ 1024
> > > > +
> > > > +/* mask of enabled ports */
> > > > +static uint32_t enabled_port_mask = 0;
> > > > +
> > > > +static volatile struct app_stats {
> > > > +	struct {
> > > > +		uint64_t rx_pkts;
> > > > +		uint64_t returned_pkts;
> > > > +		uint64_t enqueued_pkts;
> > > > +	} rx __rte_cache_aligned;
> > > > +
> > > > +	struct {
> > > > +		uint64_t dequeue_pkts;
> > > > +		uint64_t tx_pkts;
> > > > +	} tx __rte_cache_aligned;
> > > > +} app_stats;
> > > > +
> > > > +static const struct rte_eth_conf port_conf_default = {
> > > > +	.rxmode = {
> > > > +		.mq_mode = ETH_MQ_RX_RSS,
> > > > +		.max_rx_pkt_len = ETHER_MAX_LEN,
> > > > +		.split_hdr_size = 0,
> > > > +		.header_split   = 0, /**< Header Split disabled */
> > > > +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> > > > +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> > > > +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> > > > +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> > > > +	},
> > > > +	.txmode = {
> > > > +		.mq_mode = ETH_MQ_TX_NONE,
> > > > +	},
> > > > +	.lpbk_mode = 0,
> > > > +	.rx_adv_conf = {
> > > > +			.rss_conf = {
> > > > +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> > > > +					ETH_RSS_IPV4_TCP |
> > > > ETH_RSS_IPV4_UDP |
> > > > +					ETH_RSS_IPV6_TCP |
> > > > ETH_RSS_IPV6_UDP,
> > > > +			}
> > > > +	},
> > > > +};
> > > > +
> > > > +static const struct rte_eth_rxconf rx_conf_default = {
> > > > +	.rx_thresh = {
> > > > +		.pthresh = RX_PTHRESH,
> > > > +		.hthresh = RX_HTHRESH,
> > > > +		.wthresh = RX_WTHRESH,
> > > > +	},
> > > > +	.rx_free_thresh = RX_FREE_THRESH,
> > > > +	.rx_drop_en = 0,
> > > > +};
> > > > +
> > > > +static const struct rte_eth_txconf tx_conf_default = {
> > > > +	.tx_thresh = {
> > > > +		.pthresh = TX_PTHRESH,
> > > > +		.hthresh = TX_HTHRESH,
> > > > +		.wthresh = TX_WTHRESH,
> > > > +	},
> > > > +	.tx_free_thresh = TX_FREE_THRESH,
> > > > +	.tx_rs_thresh = TX_RSBIT_THRESH,
> > > > +	.txq_flags = TX_Q_FLAGS
> > > > +
> > > > +};
> > > > +
> > > > +struct output_buffer {
> > > > +	unsigned count;
> > > > +	struct rte_mbuf *mbufs[BURST_SIZE]; };
> > > > +
> > > > +/*
> > > > + * Initialises a given port using global settings and with the 
> > > > +rx buffers
> > > > + * coming from the mbuf_pool passed as parameter  */ static 
> > > > +inline int port_init(uint8_t port, struct rte_mempool *mbuf_pool) {
> > > > +	struct rte_eth_conf port_conf = port_conf_default;
> > > > +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> > > > +	int retval;
> > > > +	uint16_t q;
> > > > +
> > > > +	if (port >= rte_eth_dev_count())
> > > > +		return -1;
> > > > +
> > > > +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> > > > +	if (retval != 0)
> > > > +		return retval;
> > > > +
> > > > +	for (q = 0; q < rxRings; q++) {
> > > > +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> > > > +
> > > > 	rte_eth_dev_socket_id(port),
> > > > +						&rx_conf_default,
> > > > mbuf_pool);
> > > > +		if (retval < 0)
> > > > +			return retval;
> > > > +	}
> > > > +
> > > > +	for (q = 0; q < txRings; q++) {
> > > > +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> > > > +
> > > > 	rte_eth_dev_socket_id(port),
> > > > +						&tx_conf_default);
> > > > +		if (retval < 0)
> > > > +			return retval;
> > > > +	}
> > > > +
> > > > +	retval  = rte_eth_dev_start(port);
> > > > +	if (retval < 0)
> > > > +		return retval;
> > > > +
> > > > +	struct rte_eth_link link;
> > > > +	rte_eth_link_get_nowait(port, &link);
> > > > +	if (!link.link_status) {
> > > > +		sleep(1);
> > > > +		rte_eth_link_get_nowait(port, &link);
> > > > +	}
> > > > +
> > > > +	if (!link.link_status) {
> > > > +		printf("Link down on port %"PRIu8"\n", port);
> > > > +		return 0;
> > > > +	}
> > > > +
> > > > +	struct ether_addr addr;
> > > > +	rte_eth_macaddr_get(port, &addr);
> > > > +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> > > > +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> > > > +			(unsigned)port,
> > > > +			addr.addr_bytes[0], addr.addr_bytes[1],
> > > > +			addr.addr_bytes[2], addr.addr_bytes[3],
> > > > +			addr.addr_bytes[4], addr.addr_bytes[5]);
> > > > +
> > > > +	rte_eth_promiscuous_enable(port);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +struct lcore_params {
> > > > +	unsigned worker_id;
> > > > +	struct rte_distributor *d;
> > > > +	struct rte_ring *r;
> > > > +};
> > > > +
> > > > +static __attribute__((noreturn)) void lcore_rx(struct 
> > > > +lcore_params
> > > > +*p) {
> > > > +	struct rte_distributor *d = p->d;
> > > > +	struct rte_ring *r = p->r;
> > > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > > +	const int socket_id = rte_socket_id();
> > > > +	uint8_t port;
> > > > +
> > > > +	for (port = 0; port < nb_ports; port++) {
> > > > +		/* skip ports that are not enabled */
> > > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > > +			continue;
> > > > +
> > > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > > +			printf("WARNING, port %u is on remote NUMA node
> > > > to "
> > > > +					"RX thread.\n\tPerformance will not
> > > > "
> > > > +					"be optimal.\n", port);
> > > > +	}
> > > > +
> > > > +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> > > > +	port = 0;
> > > > +	for (;;) {
> > > > +		/* skip ports that are not enabled */
> > > > +		if ((enabled_port_mask & (1 << port)) == 0) {
> > > > +			if (++port == nb_ports)
> > > > +				port = 0;
> > > > +			continue;
> > > > +		}
> > > > +		struct rte_mbuf *bufs[BURST_SIZE*2];
> > > > +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> > > > +				BURST_SIZE);
> > > > +		app_stats.rx.rx_pkts += nb_rx;
> > > > +
> > > > +		rte_distributor_process(d, bufs, nb_rx);
> > > > +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> > > > +				bufs, BURST_SIZE*2);
> > > > +		app_stats.rx.returned_pkts += nb_ret;
> > > > +		if (unlikely(nb_ret == 0))
> > > > +			continue;
> > > > +
> > > > +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs,
> > > > nb_ret);
> > > > +		app_stats.rx.enqueued_pkts += sent;
> > > > +		if (unlikely(sent < nb_ret)) {
> > > > +			printf("Packet loss due to full ring\n");
> > >
> > > I would remove this printf. If core is too busy to process 
> > > packets, this may
> make performance worse.
> > > Statistics should reflect this packet loss.
> >
> > >Probably use RTE_LOG(DEBUG, ...).
> > >That's way you can switch it on/off at compile time.
> >
> > By default  LOG_LEVEL is 8 in config/common_linuxapp, hence I see
> RTE_LOG(DEBUG,...) always works.
> > So until unless change the LOG-LEVEL to lesser value, 
> > RTE_LOG(DEBUG,..)
> will be logged ..
> > Please let me know if I can go ahead and remove the printf as of now 
> > until
> the LOG_LEVEL is fixed. (or) I have to add some logic to log
> > RTE_LOG(DEBUG,..)  only once.
> 
> Sorry, I probably wasn't clear enough.
> What I am saying -  create something like that inside your app code:
> 
> #ifdef XXX_DEBUG
> #define XXX_LOG(level, fmt, args...) \
>         RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args) 
> #else #define XXX_LOG(level, fmt, args...) do { } while(0) #endif
> 
> And replace your pritnf()s with it.

I think we should make some changes in some logs in DPDK, and change the default log level to be INFO or less, so we could use the DEBUG level for things like this, but anyway, that would be another patch that I am thinking to submit some other day.
Anyway, for this one, this option could work, but still that message may be shown hundreds of thousands of times per second, considering that CPU is overloaded. So, should we include something like a flag here, so message is shown just once?
I know that this will only be used when DEBUG is enabled, but still that could flood the screen, as it is in an infinite loop.

> 
> >
> > >
> > > > +			while (sent < nb_ret)
> > > > +				rte_pktmbuf_free(bufs[sent++]);
> > > > +		}
> > > > +		if (++port == nb_ports)
> > > > +			port = 0;
> > > > +	}
> > > > +}
> > > > +
> > > > +static inline void
> > > > +flush_one_port(struct output_buffer *outbuf, uint8_t outp) {
> > > > +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> > > > +			outbuf->count);
> > > > +	app_stats.tx.tx_pkts += nb_tx;
> > > > +
> > > > +	if (unlikely(nb_tx < outbuf->count)) {
> > > > +		printf("Packet loss with tx_burst\n");
> > >
> > > Same here. This is fine for debugging, but statistics are updated 
> > > as well,
> so we do not need this printf.
> > >
> > > > +		do {
> > > > +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> > > > +		} while (++nb_tx < outbuf->count);
> > > > +	}
> > > > +	outbuf->count = 0;
> > > > +}
> > > > +

--------------------------------------------------------------
Intel Shannon Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263
Business address: Dromore House, East Park, Shannon, Co. Clare

This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
  2014-09-30  8:02             ` Pattan, Reshma
@ 2014-09-30  9:21               ` Ananyev, Konstantin
  0 siblings, 0 replies; 38+ messages in thread
From: Ananyev, Konstantin @ 2014-09-30  9:21 UTC (permalink / raw)
  To: Pattan, Reshma, De Lara Guarch, Pablo, dev

> -----Original Message-----
> From: Pattan, Reshma
> Sent: Tuesday, September 30, 2014 9:03 AM
> To: Ananyev, Konstantin; De Lara Guarch, Pablo; dev@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> 
> Hi Konstantin,
> 
> Any comments on below Pablos comment? If so please provide.
> 
> Thanks,
> Reshma
> 

Hi Reshma,

No really.
I would just change printf to what I suggested.
For your app, I believe that is more than enough.
But if you'd like to introduce some sort of rate limiting for logging -
sure go ahead would be interesting to see that patch.
Konstantin

> 
> 
> -----Original Message-----
> From: De Lara Guarch, Pablo
> Sent: Monday, September 29, 2014 2:35 PM
> To: Ananyev, Konstantin; Pattan, Reshma; dev@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> 
> 
> 
> > -----Original Message-----
> > From: Ananyev, Konstantin
> > Sent: Monday, September 29, 2014 2:07 PM
> > To: Pattan, Reshma; De Lara Guarch, Pablo; dev@dpdk.org
> > Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> >
> >
> >
> > > -----Original Message-----
> > > From: Pattan, Reshma
> > > Sent: Monday, September 29, 2014 1:40 PM
> > > To: Ananyev, Konstantin; De Lara Guarch, Pablo; dev@dpdk.org
> > > Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Ananyev, Konstantin
> > > Sent: Friday, September 26, 2014 4:52 PM
> > > To: De Lara Guarch, Pablo; Pattan, Reshma; dev@dpdk.org
> > > Subject: RE: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of De Lara
> > > > Guarch, Pablo
> > > > Sent: Friday, September 26, 2014 4:12 PM
> > > > To: Pattan, Reshma; dev@dpdk.org
> > > > Subject: Re: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > > >
> > > > Hi,
> > > >
> > > > > -----Original Message-----
> > > > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of reshmapa
> > > > > Sent: Wednesday, September 24, 2014 3:17 PM
> > > > > To: dev@dpdk.org
> > > > > Subject: [dpdk-dev] [PATCH v2] distributor_app: new sample app
> > > > >
> > > > > From: Reshma Pattan <reshma.pattan@intel.com>
> > > > >
> > > > > A new sample app that shows the usage of the distributor library.
> > > > > This app works as follows:
> > > > >
> > > > > * An RX thread runs which pulls packets from each ethernet port in turn
> > > > >   and passes those packets to worker using a distributor component.
> > > > > * The workers take the packets in turn, and determine the output port
> > > > >   for those packets using basic l2forwarding doing an xor on the source
> > > > >   port id.
> > > > > * The RX thread takes the returned packets from the workers and
> > enqueue
> > > > >   those packets into an rte_ring structure.
> > > > > * A TX thread pulls the packets off the rte_ring structure and then
> > > > >   sends each packet out the output port specified previously by
> > > > > the worker
> > > > > * Command-line option support provided only for portmask.
> > > > >
> > > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > > > > Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
> > > > > ---
> > > > >  examples/Makefile                 |   1 +
> > > > >  examples/distributor_app/Makefile |  57 ++++
> > > > >  examples/distributor_app/main.c   | 585
> > > > > ++++++++++++++++++++++++++++++++++++++
> > > > >  examples/distributor_app/main.h   |  46 +++
> > > > >  4 files changed, 689 insertions(+)  create mode 100644
> > > > > examples/distributor_app/Makefile  create mode
> > > > > 100644 examples/distributor_app/main.c  create mode 100644
> > > > > examples/distributor_app/main.h
> > > > >
> > > > > diff --git a/examples/Makefile b/examples/Makefile index
> > > > > 6245f83..2ba82b0 100644
> > > > > --- a/examples/Makefile
> > > > > +++ b/examples/Makefile
> > > > > @@ -66,5 +66,6 @@ DIRS-y += vhost
> > > > >  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen  DIRS-y +=
> > vmdq
> > > > > DIRS-y += vmdq_dcb
> > > > > +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> > > > >
> > > > >  include $(RTE_SDK)/mk/rte.extsubdir.mk diff --git
> > > > > a/examples/distributor_app/Makefile
> > > > > b/examples/distributor_app/Makefile
> > > > > new file mode 100644
> > > > > index 0000000..394785d
> > > > > --- /dev/null
> > > > > +++ b/examples/distributor_app/Makefile
> > > > > @@ -0,0 +1,57 @@
> > > > > +#   BSD LICENSE
> > > > > +#
> > > > > +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > > +#   All rights reserved.
> > > > > +#
> > > > > +#   Redistribution and use in source and binary forms, with or without
> > > > > +#   modification, are permitted provided that the following conditions
> > > > > +#   are met:
> > > > > +#
> > > > > +#     * Redistributions of source code must retain the above copyright
> > > > > +#       notice, this list of conditions and the following disclaimer.
> > > > > +#     * Redistributions in binary form must reproduce the above
> > copyright
> > > > > +#       notice, this list of conditions and the following disclaimer in
> > > > > +#       the documentation and/or other materials provided with the
> > > > > +#       distribution.
> > > > > +#     * Neither the name of Intel Corporation nor the names of its
> > > > > +#       contributors may be used to endorse or promote products
> > derived
> > > > > +#       from this software without specific prior written permission.
> > > > > +#
> > > > > +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > > > CONTRIBUTORS
> > > > > +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
> > BUT
> > > > > NOT
> > > > > +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > > > FITNESS FOR
> > > > > +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > > > COPYRIGHT
> > > > > +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > > > INCIDENTAL,
> > > > > +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> > BUT
> > > > > NOT
> > > > > +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> > LOSS
> > > > > OF USE,
> > > > > +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
> > CAUSED
> > > > > AND ON ANY
> > > > > +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > > > > TORT
> > > > > +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> > OUT OF
> > > > > THE USE
> > > > > +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > > > DAMAGE.
> > > > > +
> > > > > +ifeq ($(RTE_SDK),)
> > > > > +$(error "Please define RTE_SDK environment variable") endif
> > > > > +
> > > > > +# Default target, can be overriden by command line or
> > > > > +environment RTE_TARGET ?= x86_64-default-linuxapp-gcc
> > > >
> > > > This target is not present anymore. Change it to
> > > > x86_64-native-linuxapp-
> > gcc.
> > > >
> > > > > +
> > > > > +include $(RTE_SDK)/mk/rte.vars.mk
> > > > > +
> > > > > +# binary name
> > > > > +APP = distributor_app
> > > > > +
> > > > > +# all source are stored in SRCS-y SRCS-y := main.c
> > > > > +
> > > > > +CFLAGS += $(WERROR_FLAGS)
> > > > > +
> > > > > +# workaround for a gcc bug with noreturn attribute #
> > > > > +http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> > > > > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) CFLAGS_main.o +=
> > > > > +-Wno-return-type endif
> > > > > +
> > > > > +EXTRA_CFLAGS += -O3 -Wfatal-errors
> > > > > +
> > > > > +include $(RTE_SDK)/mk/rte.extapp.mk
> > > > > diff --git a/examples/distributor_app/main.c
> > > > > b/examples/distributor_app/main.c new file mode 100644 index
> > > > > 0000000..628810a
> > > > > --- /dev/null
> > > > > +++ b/examples/distributor_app/main.c
> > > > > @@ -0,0 +1,585 @@
> > > > > +/*-
> > > > > + *   BSD LICENSE
> > > > > + *
> > > > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > > + *   All rights reserved.
> > > > > + *
> > > > > + *   Redistribution and use in source and binary forms, with or without
> > > > > + *   modification, are permitted provided that the following conditions
> > > > > + *   are met:
> > > > > + *
> > > > > + *     * Redistributions of source code must retain the above copyright
> > > > > + *       notice, this list of conditions and the following disclaimer.
> > > > > + *     * Redistributions in binary form must reproduce the above
> > copyright
> > > > > + *       notice, this list of conditions and the following disclaimer in
> > > > > + *       the documentation and/or other materials provided with the
> > > > > + *       distribution.
> > > > > + *     * Neither the name of Intel Corporation nor the names of its
> > > > > + *       contributors may be used to endorse or promote products
> > derived
> > > > > + *       from this software without specific prior written permission.
> > > > > + *
> > > > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > > > CONTRIBUTORS
> > > > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
> > BUT
> > > > > NOT
> > > > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > > > FITNESS FOR
> > > > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > > > COPYRIGHT
> > > > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > > > INCIDENTAL,
> > > > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> > (INCLUDING, BUT
> > > > > NOT
> > > > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> > LOSS
> > > > > OF USE,
> > > > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
> > CAUSED
> > > > > AND ON ANY
> > > > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
> > OR
> > > > > TORT
> > > > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> > OUT OF
> > > > > THE USE
> > > > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > > > DAMAGE.
> > > > > + */
> > > > > +
> > > > > +#include <stdint.h>
> > > > > +#include <inttypes.h>
> > > > > +#include <unistd.h>
> > > > > +#include <signal.h>
> > > > > +#include <getopt.h>
> > > > > +
> > > > > +#include <rte_eal.h>
> > > > > +#include <rte_ethdev.h>
> > > > > +#include <rte_cycles.h>
> > > > > +#include <rte_malloc.h>
> > > > > +#include <rte_debug.h>
> > > > > +#include <rte_distributor.h>
> > > > > +
> > > > > +#include "main.h"
> > > > > +
> > > > > +#define RX_RING_SIZE 256
> > > > > +#define RX_FREE_THRESH 32
> > > > > +#define RX_PTHRESH 8
> > > > > +#define RX_HTHRESH 8
> > > > > +#define RX_WTHRESH 0
> > > > > +
> > > > > +#define TX_RING_SIZE 512
> > > > > +#define TX_FREE_THRESH 32
> > > > > +#define TX_PTHRESH 32
> > > > > +#define TX_HTHRESH 0
> > > > > +#define TX_WTHRESH 0
> > > > > +#define TX_RSBIT_THRESH 32
> > > > > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS |
> > > > > ETH_TXQ_FLAGS_NOVLANOFFL |\
> > > > > +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP |
> > > > > \
> > > > > +	ETH_TXQ_FLAGS_NOXSUMTCP)
> > > > > +
> > > > > +#define NUM_MBUFS ((64*1024)-1) #define MBUF_SIZE (2048 +
> > > > > +sizeof(struct rte_mbuf) +
> > > > > RTE_PKTMBUF_HEADROOM)
> > > > > +#define MBUF_CACHE_SIZE 250
> > > > > +#define BURST_SIZE 32
> > > > > +#define RTE_RING_SZ 1024
> > > > > +
> > > > > +/* mask of enabled ports */
> > > > > +static uint32_t enabled_port_mask = 0;
> > > > > +
> > > > > +static volatile struct app_stats {
> > > > > +	struct {
> > > > > +		uint64_t rx_pkts;
> > > > > +		uint64_t returned_pkts;
> > > > > +		uint64_t enqueued_pkts;
> > > > > +	} rx __rte_cache_aligned;
> > > > > +
> > > > > +	struct {
> > > > > +		uint64_t dequeue_pkts;
> > > > > +		uint64_t tx_pkts;
> > > > > +	} tx __rte_cache_aligned;
> > > > > +} app_stats;
> > > > > +
> > > > > +static const struct rte_eth_conf port_conf_default = {
> > > > > +	.rxmode = {
> > > > > +		.mq_mode = ETH_MQ_RX_RSS,
> > > > > +		.max_rx_pkt_len = ETHER_MAX_LEN,
> > > > > +		.split_hdr_size = 0,
> > > > > +		.header_split   = 0, /**< Header Split disabled */
> > > > > +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> > > > > +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> > > > > +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> > > > > +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> > > > > +	},
> > > > > +	.txmode = {
> > > > > +		.mq_mode = ETH_MQ_TX_NONE,
> > > > > +	},
> > > > > +	.lpbk_mode = 0,
> > > > > +	.rx_adv_conf = {
> > > > > +			.rss_conf = {
> > > > > +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> > > > > +					ETH_RSS_IPV4_TCP |
> > > > > ETH_RSS_IPV4_UDP |
> > > > > +					ETH_RSS_IPV6_TCP |
> > > > > ETH_RSS_IPV6_UDP,
> > > > > +			}
> > > > > +	},
> > > > > +};
> > > > > +
> > > > > +static const struct rte_eth_rxconf rx_conf_default = {
> > > > > +	.rx_thresh = {
> > > > > +		.pthresh = RX_PTHRESH,
> > > > > +		.hthresh = RX_HTHRESH,
> > > > > +		.wthresh = RX_WTHRESH,
> > > > > +	},
> > > > > +	.rx_free_thresh = RX_FREE_THRESH,
> > > > > +	.rx_drop_en = 0,
> > > > > +};
> > > > > +
> > > > > +static const struct rte_eth_txconf tx_conf_default = {
> > > > > +	.tx_thresh = {
> > > > > +		.pthresh = TX_PTHRESH,
> > > > > +		.hthresh = TX_HTHRESH,
> > > > > +		.wthresh = TX_WTHRESH,
> > > > > +	},
> > > > > +	.tx_free_thresh = TX_FREE_THRESH,
> > > > > +	.tx_rs_thresh = TX_RSBIT_THRESH,
> > > > > +	.txq_flags = TX_Q_FLAGS
> > > > > +
> > > > > +};
> > > > > +
> > > > > +struct output_buffer {
> > > > > +	unsigned count;
> > > > > +	struct rte_mbuf *mbufs[BURST_SIZE]; };
> > > > > +
> > > > > +/*
> > > > > + * Initialises a given port using global settings and with the
> > > > > +rx buffers
> > > > > + * coming from the mbuf_pool passed as parameter  */ static
> > > > > +inline int port_init(uint8_t port, struct rte_mempool *mbuf_pool) {
> > > > > +	struct rte_eth_conf port_conf = port_conf_default;
> > > > > +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> > > > > +	int retval;
> > > > > +	uint16_t q;
> > > > > +
> > > > > +	if (port >= rte_eth_dev_count())
> > > > > +		return -1;
> > > > > +
> > > > > +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> > > > > +	if (retval != 0)
> > > > > +		return retval;
> > > > > +
> > > > > +	for (q = 0; q < rxRings; q++) {
> > > > > +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> > > > > +
> > > > > 	rte_eth_dev_socket_id(port),
> > > > > +						&rx_conf_default,
> > > > > mbuf_pool);
> > > > > +		if (retval < 0)
> > > > > +			return retval;
> > > > > +	}
> > > > > +
> > > > > +	for (q = 0; q < txRings; q++) {
> > > > > +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> > > > > +
> > > > > 	rte_eth_dev_socket_id(port),
> > > > > +						&tx_conf_default);
> > > > > +		if (retval < 0)
> > > > > +			return retval;
> > > > > +	}
> > > > > +
> > > > > +	retval  = rte_eth_dev_start(port);
> > > > > +	if (retval < 0)
> > > > > +		return retval;
> > > > > +
> > > > > +	struct rte_eth_link link;
> > > > > +	rte_eth_link_get_nowait(port, &link);
> > > > > +	if (!link.link_status) {
> > > > > +		sleep(1);
> > > > > +		rte_eth_link_get_nowait(port, &link);
> > > > > +	}
> > > > > +
> > > > > +	if (!link.link_status) {
> > > > > +		printf("Link down on port %"PRIu8"\n", port);
> > > > > +		return 0;
> > > > > +	}
> > > > > +
> > > > > +	struct ether_addr addr;
> > > > > +	rte_eth_macaddr_get(port, &addr);
> > > > > +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> > > > > +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> > > > > +			(unsigned)port,
> > > > > +			addr.addr_bytes[0], addr.addr_bytes[1],
> > > > > +			addr.addr_bytes[2], addr.addr_bytes[3],
> > > > > +			addr.addr_bytes[4], addr.addr_bytes[5]);
> > > > > +
> > > > > +	rte_eth_promiscuous_enable(port);
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +struct lcore_params {
> > > > > +	unsigned worker_id;
> > > > > +	struct rte_distributor *d;
> > > > > +	struct rte_ring *r;
> > > > > +};
> > > > > +
> > > > > +static __attribute__((noreturn)) void lcore_rx(struct
> > > > > +lcore_params
> > > > > +*p) {
> > > > > +	struct rte_distributor *d = p->d;
> > > > > +	struct rte_ring *r = p->r;
> > > > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > > > +	const int socket_id = rte_socket_id();
> > > > > +	uint8_t port;
> > > > > +
> > > > > +	for (port = 0; port < nb_ports; port++) {
> > > > > +		/* skip ports that are not enabled */
> > > > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > > > +			continue;
> > > > > +
> > > > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > > > +			printf("WARNING, port %u is on remote NUMA node
> > > > > to "
> > > > > +					"RX thread.\n\tPerformance will not
> > > > > "
> > > > > +					"be optimal.\n", port);
> > > > > +	}
> > > > > +
> > > > > +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> > > > > +	port = 0;
> > > > > +	for (;;) {
> > > > > +		/* skip ports that are not enabled */
> > > > > +		if ((enabled_port_mask & (1 << port)) == 0) {
> > > > > +			if (++port == nb_ports)
> > > > > +				port = 0;
> > > > > +			continue;
> > > > > +		}
> > > > > +		struct rte_mbuf *bufs[BURST_SIZE*2];
> > > > > +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> > > > > +				BURST_SIZE);
> > > > > +		app_stats.rx.rx_pkts += nb_rx;
> > > > > +
> > > > > +		rte_distributor_process(d, bufs, nb_rx);
> > > > > +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> > > > > +				bufs, BURST_SIZE*2);
> > > > > +		app_stats.rx.returned_pkts += nb_ret;
> > > > > +		if (unlikely(nb_ret == 0))
> > > > > +			continue;
> > > > > +
> > > > > +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs,
> > > > > nb_ret);
> > > > > +		app_stats.rx.enqueued_pkts += sent;
> > > > > +		if (unlikely(sent < nb_ret)) {
> > > > > +			printf("Packet loss due to full ring\n");
> > > >
> > > > I would remove this printf. If core is too busy to process
> > > > packets, this may
> > make performance worse.
> > > > Statistics should reflect this packet loss.
> > >
> > > >Probably use RTE_LOG(DEBUG, ...).
> > > >That's way you can switch it on/off at compile time.
> > >
> > > By default  LOG_LEVEL is 8 in config/common_linuxapp, hence I see
> > RTE_LOG(DEBUG,...) always works.
> > > So until unless change the LOG-LEVEL to lesser value,
> > > RTE_LOG(DEBUG,..)
> > will be logged ..
> > > Please let me know if I can go ahead and remove the printf as of now
> > > until
> > the LOG_LEVEL is fixed. (or) I have to add some logic to log
> > > RTE_LOG(DEBUG,..)  only once.
> >
> > Sorry, I probably wasn't clear enough.
> > What I am saying -  create something like that inside your app code:
> >
> > #ifdef XXX_DEBUG
> > #define XXX_LOG(level, fmt, args...) \
> >         RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
> > #else #define XXX_LOG(level, fmt, args...) do { } while(0) #endif
> >
> > And replace your pritnf()s with it.
> 
> I think we should make some changes in some logs in DPDK, and change the default log level to be INFO or less, so we could use the
> DEBUG level for things like this, but anyway, that would be another patch that I am thinking to submit some other day.
> Anyway, for this one, this option could work, but still that message may be shown hundreds of thousands of times per second,
> considering that CPU is overloaded. So, should we include something like a flag here, so message is shown just once?
> I know that this will only be used when DEBUG is enabled, but still that could flood the screen, as it is in an infinite loop.
> 
> >
> > >
> > > >
> > > > > +			while (sent < nb_ret)
> > > > > +				rte_pktmbuf_free(bufs[sent++]);
> > > > > +		}
> > > > > +		if (++port == nb_ports)
> > > > > +			port = 0;
> > > > > +	}
> > > > > +}
> > > > > +
> > > > > +static inline void
> > > > > +flush_one_port(struct output_buffer *outbuf, uint8_t outp) {
> > > > > +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> > > > > +			outbuf->count);
> > > > > +	app_stats.tx.tx_pkts += nb_tx;
> > > > > +
> > > > > +	if (unlikely(nb_tx < outbuf->count)) {
> > > > > +		printf("Packet loss with tx_burst\n");
> > > >
> > > > Same here. This is fine for debugging, but statistics are updated
> > > > as well,
> > so we do not need this printf.
> > > >
> > > > > +		do {
> > > > > +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> > > > > +		} while (++nb_tx < outbuf->count);
> > > > > +	}
> > > > > +	outbuf->count = 0;
> > > > > +}
> > > > > +

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [dpdk-dev] [PATCH v3] distributor_app: new sample app
  2014-09-24 14:16 ` [dpdk-dev] [PATCH v2] distributor_app: new sample app reshmapa
  2014-09-26 15:11   ` De Lara Guarch, Pablo
@ 2014-09-30 10:39   ` reshmapa
  2014-09-30 11:34     ` Neil Horman
  2014-10-01 13:33     ` [dpdk-dev] [PATCH v4] distributor_app: gracefull shutdown of tx/rx threads on SIGINT reshmapa
  1 sibling, 2 replies; 38+ messages in thread
From: reshmapa @ 2014-09-30 10:39 UTC (permalink / raw)
  To: dev

From: Reshma Pattan <reshma.pattan@intel.com>

A new sample app that shows the usage of the distributor library. This
app works as follows:

* An RX thread runs which pulls packets from each ethernet port in turn
  and passes those packets to worker using a distributor component.
* The workers take the packets in turn, and determine the output port
  for those packets using basic l2forwarding doing an xor on the source
  port id.
* The RX thread takes the returned packets from the workers and enqueue
  those packets into an rte_ring structure.
* A TX thread pulls the packets off the rte_ring structure and then
  sends each packet out the output port specified previously by the worker
* Command-line option support provided only for portmask.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Reshma Pattan    <reshma.pattan@intel.com>
---
 examples/Makefile                 |    1 +
 examples/distributor_app/Makefile |   57 ++++
 examples/distributor_app/main.c   |  600 +++++++++++++++++++++++++++++++++++++
 examples/distributor_app/main.h   |   46 +++
 4 files changed, 704 insertions(+), 0 deletions(-)
 create mode 100644 examples/distributor_app/Makefile
 create mode 100644 examples/distributor_app/main.c
 create mode 100644 examples/distributor_app/main.h

diff --git a/examples/Makefile b/examples/Makefile
index 6245f83..2ba82b0 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -66,5 +66,6 @@ DIRS-y += vhost
 DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
 DIRS-y += vmdq
 DIRS-y += vmdq_dcb
+DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
 
 include $(RTE_SDK)/mk/rte.extsubdir.mk
diff --git a/examples/distributor_app/Makefile b/examples/distributor_app/Makefile
new file mode 100644
index 0000000..6a5bada
--- /dev/null
+++ b/examples/distributor_app/Makefile
@@ -0,0 +1,57 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = distributor_app
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+EXTRA_CFLAGS += -O3 -Wfatal-errors
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/distributor_app/main.c b/examples/distributor_app/main.c
new file mode 100644
index 0000000..f555d93
--- /dev/null
+++ b/examples/distributor_app/main.c
@@ -0,0 +1,600 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <signal.h>
+#include <getopt.h>
+
+#include <rte_eal.h>
+#include <rte_ethdev.h>
+#include <rte_cycles.h>
+#include <rte_malloc.h>
+#include <rte_debug.h>
+#include <rte_distributor.h>
+
+#include "main.h"
+
+#define RX_RING_SIZE 256
+#define RX_FREE_THRESH 32
+#define RX_PTHRESH 8
+#define RX_HTHRESH 8
+#define RX_WTHRESH 0
+
+#define TX_RING_SIZE 512
+#define TX_FREE_THRESH 32
+#define TX_PTHRESH 32
+#define TX_HTHRESH 0
+#define TX_WTHRESH 0
+#define TX_RSBIT_THRESH 32
+#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\
+	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
+	ETH_TXQ_FLAGS_NOXSUMTCP)
+
+#define NUM_MBUFS ((64*1024)-1)
+#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_CACHE_SIZE 250
+#define BURST_SIZE 32
+#define RTE_RING_SZ 1024
+
+/* uncommnet below line to enable debug logs */
+/* #define DEBUG */
+
+#ifdef DEBUG
+#define LOG_LEVEL RTE_LOG_DEBUG
+#define LOG_DEBUG(log_type, fmt, args...) do {	\
+	RTE_LOG(DEBUG, log_type, fmt, ##args)		\
+} while (0)
+#else
+#define LOG_LEVEL RTE_LOG_INFO
+#define LOG_DEBUG(log_type, fmt, args...) do {} while (0)
+#endif
+
+#define RTE_LOGTYPE_DISTRAPP RTE_LOGTYPE_USER1
+
+/* mask of enabled ports */
+static uint32_t enabled_port_mask = 0;
+
+static volatile struct app_stats {
+	struct {
+		uint64_t rx_pkts;
+		uint64_t returned_pkts;
+		uint64_t enqueued_pkts;
+	} rx __rte_cache_aligned;
+
+	struct {
+		uint64_t dequeue_pkts;
+		uint64_t tx_pkts;
+	} tx __rte_cache_aligned;
+} app_stats;
+
+static const struct rte_eth_conf port_conf_default = {
+	.rxmode = {
+		.mq_mode = ETH_MQ_RX_RSS,
+		.max_rx_pkt_len = ETHER_MAX_LEN,
+		.split_hdr_size = 0,
+		.header_split   = 0, /**< Header Split disabled */
+		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
+		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
+		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
+		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
+	},
+	.txmode = {
+		.mq_mode = ETH_MQ_TX_NONE,
+	},
+	.lpbk_mode = 0,
+	.rx_adv_conf = {
+			.rss_conf = {
+				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
+					ETH_RSS_IPV4_TCP | ETH_RSS_IPV4_UDP |
+					ETH_RSS_IPV6_TCP | ETH_RSS_IPV6_UDP,
+			}
+	},
+};
+
+static const struct rte_eth_rxconf rx_conf_default = {
+	.rx_thresh = {
+		.pthresh = RX_PTHRESH,
+		.hthresh = RX_HTHRESH,
+		.wthresh = RX_WTHRESH,
+	},
+	.rx_free_thresh = RX_FREE_THRESH,
+	.rx_drop_en = 0,
+};
+
+static const struct rte_eth_txconf tx_conf_default = {
+	.tx_thresh = {
+		.pthresh = TX_PTHRESH,
+		.hthresh = TX_HTHRESH,
+		.wthresh = TX_WTHRESH,
+	},
+	.tx_free_thresh = TX_FREE_THRESH,
+	.tx_rs_thresh = TX_RSBIT_THRESH,
+	.txq_flags = TX_Q_FLAGS
+
+};
+
+struct output_buffer {
+	unsigned count;
+	struct rte_mbuf *mbufs[BURST_SIZE];
+};
+
+/*
+ * Initialises a given port using global settings and with the rx buffers
+ * coming from the mbuf_pool passed as parameter
+ */
+static inline int
+port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+{
+	struct rte_eth_conf port_conf = port_conf_default;
+	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
+	int retval;
+	uint16_t q;
+
+	if (port >= rte_eth_dev_count())
+		return -1;
+
+	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
+	if (retval != 0)
+		return retval;
+
+	for (q = 0; q < rxRings; q++) {
+		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
+						rte_eth_dev_socket_id(port),
+						&rx_conf_default, mbuf_pool);
+		if (retval < 0)
+			return retval;
+	}
+
+	for (q = 0; q < txRings; q++) {
+		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
+						rte_eth_dev_socket_id(port),
+						&tx_conf_default);
+		if (retval < 0)
+			return retval;
+	}
+
+	retval  = rte_eth_dev_start(port);
+	if (retval < 0)
+		return retval;
+
+	struct rte_eth_link link;
+	rte_eth_link_get_nowait(port, &link);
+	if (!link.link_status) {
+		sleep(1);
+		rte_eth_link_get_nowait(port, &link);
+	}
+
+	if (!link.link_status) {
+		printf("Link down on port %"PRIu8"\n", port);
+		return 0;
+	}
+
+	struct ether_addr addr;
+	rte_eth_macaddr_get(port, &addr);
+	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
+			(unsigned)port,
+			addr.addr_bytes[0], addr.addr_bytes[1],
+			addr.addr_bytes[2], addr.addr_bytes[3],
+			addr.addr_bytes[4], addr.addr_bytes[5]);
+
+	rte_eth_promiscuous_enable(port);
+
+	return 0;
+}
+
+struct lcore_params {
+	unsigned worker_id;
+	struct rte_distributor *d;
+	struct rte_ring *r;
+};
+
+static __attribute__((noreturn)) void
+lcore_rx(struct lcore_params *p)
+{
+	struct rte_distributor *d = p->d;
+	struct rte_ring *r = p->r;
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const int socket_id = rte_socket_id();
+	uint8_t port;
+
+	for (port = 0; port < nb_ports; port++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0)
+			continue;
+
+		if (rte_eth_dev_socket_id(port) > 0 &&
+				rte_eth_dev_socket_id(port) != socket_id)
+			printf("WARNING, port %u is on remote NUMA node to "
+					"RX thread.\n\tPerformance will not "
+					"be optimal.\n", port);
+	}
+
+	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
+	port = 0;
+	for (;;) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0) {
+			if (++port == nb_ports)
+				port = 0;
+			continue;
+		}
+		struct rte_mbuf *bufs[BURST_SIZE*2];
+		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
+				BURST_SIZE);
+		app_stats.rx.rx_pkts += nb_rx;
+
+		rte_distributor_process(d, bufs, nb_rx);
+		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
+				bufs, BURST_SIZE*2);
+		app_stats.rx.returned_pkts += nb_ret;
+		if (unlikely(nb_ret == 0))
+			continue;
+
+		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs, nb_ret);
+		app_stats.rx.enqueued_pkts += sent;
+		if (unlikely(sent < nb_ret)) {
+			LOG_DEBUG(DISTRAPP, "%s:Packet loss due to full ring\n", __func__);
+			while (sent < nb_ret)
+				rte_pktmbuf_free(bufs[sent++]);
+		}
+		if (++port == nb_ports)
+			port = 0;
+	}
+}
+
+static inline void
+flush_one_port(struct output_buffer *outbuf, uint8_t outp)
+{
+	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
+			outbuf->count);
+	app_stats.tx.tx_pkts += nb_tx;
+
+	if (unlikely(nb_tx < outbuf->count)) {
+		LOG_DEBUG(DISTRAPP, "%s:Packet loss with tx_burst\n", __func__);
+		do {
+			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
+		} while (++nb_tx < outbuf->count);
+	}
+	outbuf->count = 0;
+}
+
+static inline void
+flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
+{
+	uint8_t outp;
+	for (outp = 0; outp < nb_ports; outp++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << outp)) == 0)
+			continue;
+
+		if (tx_buffers[outp].count == 0)
+			continue;
+
+		flush_one_port(&tx_buffers[outp], outp);
+	}
+}
+
+static __attribute__((noreturn)) void
+lcore_tx(struct rte_ring *in_r)
+{
+	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const int socket_id = rte_socket_id();
+	uint8_t port;
+
+	for (port = 0; port < nb_ports; port++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0)
+			continue;
+
+		if (rte_eth_dev_socket_id(port) > 0 &&
+				rte_eth_dev_socket_id(port) != socket_id)
+			printf("WARNING, port %u is on remote NUMA node to "
+					"TX thread.\n\tPerformance will not "
+					"be optimal.\n", port);
+	}
+
+	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
+	for (;;) {
+		for (port = 0; port < nb_ports; port++) {
+			/* skip ports that are not enabled */
+			if ((enabled_port_mask & (1 << port)) == 0)
+				continue;
+
+			struct rte_mbuf *bufs[BURST_SIZE];
+			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
+					(void *)bufs, BURST_SIZE);
+			app_stats.tx.dequeue_pkts += nb_rx;
+
+			/* if we get no traffic, flush anything we have */
+			if (unlikely(nb_rx == 0)) {
+				flush_all_ports(tx_buffers, nb_ports);
+				continue;
+			}
+
+			/* for traffic we receive, queue it up for transmit */
+			uint16_t i;
+			_mm_prefetch(bufs[0], 0);
+			_mm_prefetch(bufs[1], 0);
+			_mm_prefetch(bufs[2], 0);
+			for (i = 0; i < nb_rx; i++) {
+				struct output_buffer *outbuf;
+				uint8_t outp;
+				_mm_prefetch(bufs[i + 3], 0);
+				/* workers should update in_port to hold the
+				 * output port value */
+				outp = bufs[i]->port;
+				/* skip ports that are not enabled */
+				if ((enabled_port_mask & (1 << outp)) == 0)
+					continue;
+
+				outbuf = &tx_buffers[outp];
+				outbuf->mbufs[outbuf->count++] = bufs[i];
+				if (outbuf->count == BURST_SIZE)
+					flush_one_port(outbuf, outp);
+			}
+		}
+	}
+}
+
+
+static __attribute__((noreturn)) void
+lcore_worker(struct lcore_params *p)
+{
+	struct rte_distributor *d = p->d;
+	const unsigned id = p->worker_id;
+	/* for single port, xor_val will be zero so we won't modify the output
+	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
+	 */
+	const unsigned xor_val = (rte_eth_dev_count() > 1);
+	struct rte_mbuf *buf = NULL;
+
+	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
+	for (;;) {
+		buf = rte_distributor_get_pkt(d, id, buf);
+		buf->port ^= xor_val;
+	}
+}
+
+static void
+int_handler(int sig_num)
+{
+	struct rte_eth_stats eth_stats;
+	unsigned i;
+
+	printf("Exiting on signal %d\n", sig_num);
+
+	printf("\nRX thread stats:\n");
+	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
+	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
+	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
+
+	printf("\nTX thread stats:\n");
+	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
+	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
+
+	for (i = 0; i < rte_eth_dev_count(); i++) {
+		rte_eth_stats_get(i, &eth_stats);
+		printf("\nPort %u stats:\n", i);
+		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
+		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
+		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
+		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
+		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
+	}
+	exit(0);
+}
+
+/* display usage */
+static void
+print_usage(const char *prgname)
+{
+	printf("%s [EAL options] -- -p PORTMASK\n"
+			"  -p PORTMASK: hexadecimal bitmask of ports to configure\n",
+			prgname);
+}
+
+static int
+parse_portmask(const char *portmask)
+{
+	char *end = NULL;
+	unsigned long pm;
+
+	/* parse hexadecimal string */
+	pm = strtoul(portmask, &end, 16);
+	if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+		return -1;
+
+	if (pm == 0)
+		return -1;
+
+	return pm;
+}
+
+/* Parse the argument given in the command line of the application */
+static int
+parse_args(int argc, char **argv)
+{
+	int opt;
+	char **argvopt;
+	int option_index;
+	char *prgname = argv[0];
+	static struct option lgopts[] = {
+		{NULL, 0, 0, 0}
+	};
+
+	argvopt = argv;
+
+	while ((opt = getopt_long(argc, argvopt, "p:",
+			lgopts, &option_index)) != EOF) {
+
+		switch (opt) {
+			/* portmask */
+			case 'p':
+				enabled_port_mask = parse_portmask(optarg);
+				if (enabled_port_mask == 0) {
+					printf("invalid portmask\n");
+					print_usage(prgname);
+					return -1;
+				}
+				break;
+
+			default:
+				print_usage(prgname);
+				return -1;
+		}
+	}
+
+if (optind <= 1) {
+	print_usage(prgname);
+	return -1;
+}
+
+	argv[optind-1] = prgname;
+
+	optind = 0; /* reset getopt lib */
+	return 0;
+}
+
+/* Main function, does initialization and calls the per-lcore functions */
+int
+MAIN(int argc, char *argv[])
+{
+	struct rte_mempool *mbuf_pool;
+	struct rte_distributor *d;
+	struct rte_ring *output_ring;
+	unsigned lcore_id, worker_id = 0;
+	unsigned nb_ports;
+	uint8_t portid;
+	uint8_t nb_ports_available;
+
+	/* catch ctrl-c so we can print on exit */
+	signal(SIGINT, int_handler);
+
+	/* init EAL */
+	int ret = rte_eal_init(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+	argc -= ret;
+	argv += ret;
+
+	/* parse application arguments (after the EAL ones) */
+	ret = parse_args(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "Invalid distributor parameters\n");
+
+	if (rte_lcore_count() < 3)
+		rte_exit(EXIT_FAILURE, "Error, This application needs at "
+				"least 3 logical cores to run:\n"
+				"1 lcore for packet RX and distribution\n"
+				"1 lcore for packet TX\n"
+				"and at least 1 lcore for worker threads\n");
+
+	if (rte_eal_pci_probe() != 0)
+		rte_exit(EXIT_FAILURE, "Error with PCI probing\n");
+
+	nb_ports = rte_eth_dev_count();
+	if (nb_ports == 0)
+		rte_exit(EXIT_FAILURE, "Error: no ethernet ports detected\n");
+	if (nb_ports != 1 && (nb_ports & 1))
+		rte_exit(EXIT_FAILURE, "Error: number of ports must be even, except "
+				"when using a single port\n");
+
+	mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
+			MBUF_SIZE, MBUF_CACHE_SIZE,
+			sizeof(struct rte_pktmbuf_pool_private),
+			rte_pktmbuf_pool_init, NULL,
+			rte_pktmbuf_init, NULL,
+			rte_socket_id(), 0);
+	if (mbuf_pool == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+	nb_ports_available = nb_ports;
+
+	/* initialize all ports */
+	for (portid = 0; portid < nb_ports; portid++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << portid)) == 0) {
+			printf("\nSkipping disabled port %d\n", portid);
+			nb_ports_available--;
+			continue;
+		}
+		/* init port */
+		printf("Initializing port %u... done\n", (unsigned) portid);
+
+		if (port_init(portid, mbuf_pool) != 0)
+			rte_exit(EXIT_FAILURE, "Cannot initialize port %"PRIu8"\n",
+					portid);
+	}
+
+	if (!nb_ports_available) {
+		rte_exit(EXIT_FAILURE,
+				"All available ports are disabled. Please set portmask.\n");
+	}
+
+	d = rte_distributor_create("PKT_DIST", rte_socket_id(),
+			rte_lcore_count() - 2);
+	if (d == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create distributor\n");
+
+	/* scheduler ring is read only by the transmitter core, but written to
+	 * by multiple threads
+	 */
+	output_ring = rte_ring_create("Output_ring", RTE_RING_SZ,
+			rte_socket_id(), RING_F_SC_DEQ);
+	if (output_ring == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create output ring\n");
+
+	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+		if (worker_id == rte_lcore_count() - 2)
+			rte_eal_remote_launch((lcore_function_t *)lcore_tx,
+					output_ring, lcore_id);
+		else {
+			struct lcore_params *p =
+					rte_malloc(NULL, sizeof(*p), 0);
+			if (!p)
+				rte_panic("malloc failure\n");
+			*p = (struct lcore_params){worker_id, d, output_ring};
+			rte_eal_remote_launch((lcore_function_t *)lcore_worker,
+					p, lcore_id);
+		}
+		worker_id++;
+	}
+	/* call lcore_main on master core only */
+	struct lcore_params p = { 0, d, output_ring };
+	lcore_rx(&p);
+	return 0;
+}
diff --git a/examples/distributor_app/main.h b/examples/distributor_app/main.h
new file mode 100644
index 0000000..2682d15
--- /dev/null
+++ b/examples/distributor_app/main.h
@@ -0,0 +1,46 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char *argv[]);
+
+#endif /* ifndef _MAIN_H_ */
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
  2014-09-30 10:39   ` [dpdk-dev] [PATCH v3] " reshmapa
@ 2014-09-30 11:34     ` Neil Horman
  2014-09-30 12:18       ` Bruce Richardson
  2014-10-01 13:33     ` [dpdk-dev] [PATCH v4] distributor_app: gracefull shutdown of tx/rx threads on SIGINT reshmapa
  1 sibling, 1 reply; 38+ messages in thread
From: Neil Horman @ 2014-09-30 11:34 UTC (permalink / raw)
  To: reshmapa; +Cc: dev

On Tue, Sep 30, 2014 at 11:39:37AM +0100, reshmapa wrote:
> From: Reshma Pattan <reshma.pattan@intel.com>
> 
> A new sample app that shows the usage of the distributor library. This
> app works as follows:
> 
> * An RX thread runs which pulls packets from each ethernet port in turn
>   and passes those packets to worker using a distributor component.
> * The workers take the packets in turn, and determine the output port
>   for those packets using basic l2forwarding doing an xor on the source
>   port id.
> * The RX thread takes the returned packets from the workers and enqueue
>   those packets into an rte_ring structure.
> * A TX thread pulls the packets off the rte_ring structure and then
>   sends each packet out the output port specified previously by the worker
> * Command-line option support provided only for portmask.
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Reshma Pattan    <reshma.pattan@intel.com>
> ---
>  examples/Makefile                 |    1 +
>  examples/distributor_app/Makefile |   57 ++++
>  examples/distributor_app/main.c   |  600 +++++++++++++++++++++++++++++++++++++
>  examples/distributor_app/main.h   |   46 +++
>  4 files changed, 704 insertions(+), 0 deletions(-)
>  create mode 100644 examples/distributor_app/Makefile
>  create mode 100644 examples/distributor_app/main.c
>  create mode 100644 examples/distributor_app/main.h
> 
> diff --git a/examples/Makefile b/examples/Makefile
> index 6245f83..2ba82b0 100644
> --- a/examples/Makefile
> +++ b/examples/Makefile
> @@ -66,5 +66,6 @@ DIRS-y += vhost
>  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
>  DIRS-y += vmdq
>  DIRS-y += vmdq_dcb
> +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
>  
>  include $(RTE_SDK)/mk/rte.extsubdir.mk
> diff --git a/examples/distributor_app/Makefile b/examples/distributor_app/Makefile
> new file mode 100644
> index 0000000..6a5bada
> --- /dev/null
> +++ b/examples/distributor_app/Makefile
> @@ -0,0 +1,57 @@
> +#   BSD LICENSE
> +#
> +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> +#   All rights reserved.
> +#
> +#   Redistribution and use in source and binary forms, with or without
> +#   modification, are permitted provided that the following conditions
> +#   are met:
> +#
> +#     * Redistributions of source code must retain the above copyright
> +#       notice, this list of conditions and the following disclaimer.
> +#     * Redistributions in binary form must reproduce the above copyright
> +#       notice, this list of conditions and the following disclaimer in
> +#       the documentation and/or other materials provided with the
> +#       distribution.
> +#     * Neither the name of Intel Corporation nor the names of its
> +#       contributors may be used to endorse or promote products derived
> +#       from this software without specific prior written permission.
> +#
> +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +ifeq ($(RTE_SDK),)
> +$(error "Please define RTE_SDK environment variable")
> +endif
> +
> +# Default target, can be overriden by command line or environment
> +RTE_TARGET ?= x86_64-native-linuxapp-gcc
> +
> +include $(RTE_SDK)/mk/rte.vars.mk
> +
> +# binary name
> +APP = distributor_app
> +
> +# all source are stored in SRCS-y
> +SRCS-y := main.c
> +
> +CFLAGS += $(WERROR_FLAGS)
> +
> +# workaround for a gcc bug with noreturn attribute
> +# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
> +CFLAGS_main.o += -Wno-return-type
> +endif
> +
> +EXTRA_CFLAGS += -O3 -Wfatal-errors
> +
> +include $(RTE_SDK)/mk/rte.extapp.mk
> diff --git a/examples/distributor_app/main.c b/examples/distributor_app/main.c
> new file mode 100644
> index 0000000..f555d93
> --- /dev/null
> +++ b/examples/distributor_app/main.c
> @@ -0,0 +1,600 @@
> +/*-
> + *   BSD LICENSE
> + *
> + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> + *   All rights reserved.
> + *
> + *   Redistribution and use in source and binary forms, with or without
> + *   modification, are permitted provided that the following conditions
> + *   are met:
> + *
> + *     * Redistributions of source code must retain the above copyright
> + *       notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *       notice, this list of conditions and the following disclaimer in
> + *       the documentation and/or other materials provided with the
> + *       distribution.
> + *     * Neither the name of Intel Corporation nor the names of its
> + *       contributors may be used to endorse or promote products derived
> + *       from this software without specific prior written permission.
> + *
> + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <stdint.h>
> +#include <inttypes.h>
> +#include <unistd.h>
> +#include <signal.h>
> +#include <getopt.h>
> +
> +#include <rte_eal.h>
> +#include <rte_ethdev.h>
> +#include <rte_cycles.h>
> +#include <rte_malloc.h>
> +#include <rte_debug.h>
> +#include <rte_distributor.h>
> +
> +#include "main.h"
> +
> +#define RX_RING_SIZE 256
> +#define RX_FREE_THRESH 32
> +#define RX_PTHRESH 8
> +#define RX_HTHRESH 8
> +#define RX_WTHRESH 0
> +
> +#define TX_RING_SIZE 512
> +#define TX_FREE_THRESH 32
> +#define TX_PTHRESH 32
> +#define TX_HTHRESH 0
> +#define TX_WTHRESH 0
> +#define TX_RSBIT_THRESH 32
> +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\
> +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
> +	ETH_TXQ_FLAGS_NOXSUMTCP)
> +
> +#define NUM_MBUFS ((64*1024)-1)
> +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
> +#define MBUF_CACHE_SIZE 250
> +#define BURST_SIZE 32
> +#define RTE_RING_SZ 1024
> +
> +/* uncommnet below line to enable debug logs */
> +/* #define DEBUG */
> +
> +#ifdef DEBUG
> +#define LOG_LEVEL RTE_LOG_DEBUG
> +#define LOG_DEBUG(log_type, fmt, args...) do {	\
> +	RTE_LOG(DEBUG, log_type, fmt, ##args)		\
> +} while (0)
> +#else
> +#define LOG_LEVEL RTE_LOG_INFO
> +#define LOG_DEBUG(log_type, fmt, args...) do {} while (0)
> +#endif
> +
> +#define RTE_LOGTYPE_DISTRAPP RTE_LOGTYPE_USER1
> +
> +/* mask of enabled ports */
> +static uint32_t enabled_port_mask = 0;
> +
> +static volatile struct app_stats {
> +	struct {
> +		uint64_t rx_pkts;
> +		uint64_t returned_pkts;
> +		uint64_t enqueued_pkts;
> +	} rx __rte_cache_aligned;
> +
> +	struct {
> +		uint64_t dequeue_pkts;
> +		uint64_t tx_pkts;
> +	} tx __rte_cache_aligned;
> +} app_stats;
> +
> +static const struct rte_eth_conf port_conf_default = {
> +	.rxmode = {
> +		.mq_mode = ETH_MQ_RX_RSS,
> +		.max_rx_pkt_len = ETHER_MAX_LEN,
> +		.split_hdr_size = 0,
> +		.header_split   = 0, /**< Header Split disabled */
> +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> +	},
> +	.txmode = {
> +		.mq_mode = ETH_MQ_TX_NONE,
> +	},
> +	.lpbk_mode = 0,
> +	.rx_adv_conf = {
> +			.rss_conf = {
> +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> +					ETH_RSS_IPV4_TCP | ETH_RSS_IPV4_UDP |
> +					ETH_RSS_IPV6_TCP | ETH_RSS_IPV6_UDP,
> +			}
> +	},
> +};
> +
> +static const struct rte_eth_rxconf rx_conf_default = {
> +	.rx_thresh = {
> +		.pthresh = RX_PTHRESH,
> +		.hthresh = RX_HTHRESH,
> +		.wthresh = RX_WTHRESH,
> +	},
> +	.rx_free_thresh = RX_FREE_THRESH,
> +	.rx_drop_en = 0,
> +};
> +
> +static const struct rte_eth_txconf tx_conf_default = {
> +	.tx_thresh = {
> +		.pthresh = TX_PTHRESH,
> +		.hthresh = TX_HTHRESH,
> +		.wthresh = TX_WTHRESH,
> +	},
> +	.tx_free_thresh = TX_FREE_THRESH,
> +	.tx_rs_thresh = TX_RSBIT_THRESH,
> +	.txq_flags = TX_Q_FLAGS
> +
> +};
> +
> +struct output_buffer {
> +	unsigned count;
> +	struct rte_mbuf *mbufs[BURST_SIZE];
> +};
> +
> +/*
> + * Initialises a given port using global settings and with the rx buffers
> + * coming from the mbuf_pool passed as parameter
> + */
> +static inline int
> +port_init(uint8_t port, struct rte_mempool *mbuf_pool)
> +{
> +	struct rte_eth_conf port_conf = port_conf_default;
> +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> +	int retval;
> +	uint16_t q;
> +
> +	if (port >= rte_eth_dev_count())
> +		return -1;
> +
> +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> +	if (retval != 0)
> +		return retval;
> +
> +	for (q = 0; q < rxRings; q++) {
> +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> +						rte_eth_dev_socket_id(port),
> +						&rx_conf_default, mbuf_pool);
> +		if (retval < 0)
> +			return retval;
> +	}
> +
> +	for (q = 0; q < txRings; q++) {
> +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> +						rte_eth_dev_socket_id(port),
> +						&tx_conf_default);
> +		if (retval < 0)
> +			return retval;
> +	}
> +
> +	retval  = rte_eth_dev_start(port);
> +	if (retval < 0)
> +		return retval;
> +
> +	struct rte_eth_link link;
> +	rte_eth_link_get_nowait(port, &link);
> +	if (!link.link_status) {
> +		sleep(1);
> +		rte_eth_link_get_nowait(port, &link);
> +	}
> +
> +	if (!link.link_status) {
> +		printf("Link down on port %"PRIu8"\n", port);
> +		return 0;
> +	}
> +
> +	struct ether_addr addr;
> +	rte_eth_macaddr_get(port, &addr);
> +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> +			(unsigned)port,
> +			addr.addr_bytes[0], addr.addr_bytes[1],
> +			addr.addr_bytes[2], addr.addr_bytes[3],
> +			addr.addr_bytes[4], addr.addr_bytes[5]);
> +
> +	rte_eth_promiscuous_enable(port);
> +
> +	return 0;
> +}
> +
> +struct lcore_params {
> +	unsigned worker_id;
> +	struct rte_distributor *d;
> +	struct rte_ring *r;
> +};
> +
> +static __attribute__((noreturn)) void
> +lcore_rx(struct lcore_params *p)
> +{
> +	struct rte_distributor *d = p->d;
> +	struct rte_ring *r = p->r;
> +	const uint8_t nb_ports = rte_eth_dev_count();
> +	const int socket_id = rte_socket_id();
> +	uint8_t port;
> +
> +	for (port = 0; port < nb_ports; port++) {
> +		/* skip ports that are not enabled */
> +		if ((enabled_port_mask & (1 << port)) == 0)
> +			continue;
> +
> +		if (rte_eth_dev_socket_id(port) > 0 &&
> +				rte_eth_dev_socket_id(port) != socket_id)
> +			printf("WARNING, port %u is on remote NUMA node to "
> +					"RX thread.\n\tPerformance will not "
> +					"be optimal.\n", port);
> +	}
> +
> +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> +	port = 0;
> +	for (;;) {
> +		/* skip ports that are not enabled */
> +		if ((enabled_port_mask & (1 << port)) == 0) {
> +			if (++port == nb_ports)
> +				port = 0;
> +			continue;
> +		}
> +		struct rte_mbuf *bufs[BURST_SIZE*2];
> +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> +				BURST_SIZE);
> +		app_stats.rx.rx_pkts += nb_rx;
> +
> +		rte_distributor_process(d, bufs, nb_rx);
> +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> +				bufs, BURST_SIZE*2);
> +		app_stats.rx.returned_pkts += nb_ret;
> +		if (unlikely(nb_ret == 0))
> +			continue;
> +
> +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs, nb_ret);
> +		app_stats.rx.enqueued_pkts += sent;
> +		if (unlikely(sent < nb_ret)) {
> +			LOG_DEBUG(DISTRAPP, "%s:Packet loss due to full ring\n", __func__);
> +			while (sent < nb_ret)
> +				rte_pktmbuf_free(bufs[sent++]);
> +		}
> +		if (++port == nb_ports)
> +			port = 0;
> +	}
> +}
> +
> +static inline void
> +flush_one_port(struct output_buffer *outbuf, uint8_t outp)
> +{
> +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> +			outbuf->count);
> +	app_stats.tx.tx_pkts += nb_tx;
> +
> +	if (unlikely(nb_tx < outbuf->count)) {
> +		LOG_DEBUG(DISTRAPP, "%s:Packet loss with tx_burst\n", __func__);
> +		do {
> +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> +		} while (++nb_tx < outbuf->count);
> +	}
> +	outbuf->count = 0;
> +}
> +
> +static inline void
> +flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
> +{
> +	uint8_t outp;
> +	for (outp = 0; outp < nb_ports; outp++) {
> +		/* skip ports that are not enabled */
> +		if ((enabled_port_mask & (1 << outp)) == 0)
> +			continue;
> +
> +		if (tx_buffers[outp].count == 0)
> +			continue;
> +
> +		flush_one_port(&tx_buffers[outp], outp);
> +	}
> +}
> +
> +static __attribute__((noreturn)) void
> +lcore_tx(struct rte_ring *in_r)
> +{
> +	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
> +	const uint8_t nb_ports = rte_eth_dev_count();
> +	const int socket_id = rte_socket_id();
> +	uint8_t port;
> +
> +	for (port = 0; port < nb_ports; port++) {
> +		/* skip ports that are not enabled */
> +		if ((enabled_port_mask & (1 << port)) == 0)
> +			continue;
> +
> +		if (rte_eth_dev_socket_id(port) > 0 &&
> +				rte_eth_dev_socket_id(port) != socket_id)
> +			printf("WARNING, port %u is on remote NUMA node to "
> +					"TX thread.\n\tPerformance will not "
> +					"be optimal.\n", port);
> +	}
> +
> +	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
> +	for (;;) {
> +		for (port = 0; port < nb_ports; port++) {
> +			/* skip ports that are not enabled */
> +			if ((enabled_port_mask & (1 << port)) == 0)
> +				continue;
> +
> +			struct rte_mbuf *bufs[BURST_SIZE];
> +			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
> +					(void *)bufs, BURST_SIZE);
> +			app_stats.tx.dequeue_pkts += nb_rx;
> +
> +			/* if we get no traffic, flush anything we have */
> +			if (unlikely(nb_rx == 0)) {
> +				flush_all_ports(tx_buffers, nb_ports);
> +				continue;
> +			}
> +
> +			/* for traffic we receive, queue it up for transmit */
> +			uint16_t i;
> +			_mm_prefetch(bufs[0], 0);
> +			_mm_prefetch(bufs[1], 0);
> +			_mm_prefetch(bufs[2], 0);
> +			for (i = 0; i < nb_rx; i++) {
> +				struct output_buffer *outbuf;
> +				uint8_t outp;
> +				_mm_prefetch(bufs[i + 3], 0);
> +				/* workers should update in_port to hold the
> +				 * output port value */
> +				outp = bufs[i]->port;
> +				/* skip ports that are not enabled */
> +				if ((enabled_port_mask & (1 << outp)) == 0)
> +					continue;
> +
> +				outbuf = &tx_buffers[outp];
> +				outbuf->mbufs[outbuf->count++] = bufs[i];
> +				if (outbuf->count == BURST_SIZE)
> +					flush_one_port(outbuf, outp);
> +			}
> +		}
> +	}
> +}
> +
> +
> +static __attribute__((noreturn)) void
> +lcore_worker(struct lcore_params *p)
> +{
> +	struct rte_distributor *d = p->d;
> +	const unsigned id = p->worker_id;
> +	/* for single port, xor_val will be zero so we won't modify the output
> +	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
> +	 */
> +	const unsigned xor_val = (rte_eth_dev_count() > 1);
> +	struct rte_mbuf *buf = NULL;
> +
> +	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
> +	for (;;) {
> +		buf = rte_distributor_get_pkt(d, id, buf);
> +		buf->port ^= xor_val;
> +	}
> +}
> +
> +static void
> +int_handler(int sig_num)
> +{
> +	struct rte_eth_stats eth_stats;
> +	unsigned i;
> +
> +	printf("Exiting on signal %d\n", sig_num);
> +
> +	printf("\nRX thread stats:\n");
> +	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
> +	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
> +	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
> +
> +	printf("\nTX thread stats:\n");
> +	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
> +	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
> +
> +	for (i = 0; i < rte_eth_dev_count(); i++) {
> +		rte_eth_stats_get(i, &eth_stats);
> +		printf("\nPort %u stats:\n", i);
> +		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
> +		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
> +		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
> +		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
> +		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
> +	}
> +	exit(0);
rte_exit here?  Also, this is a pretty ungraceful exit strategy as all the
threads you've created and memory you've allocated are just forgotten here.
Given that dpdk mempools are shared, this has the potential to leak lots of
memory if other apps are using the dpdk at the same time that you run this.  You
probably want to use the sigint handler to raise a flag to the tx/rx threads to
shutdown gracefully, and then free your allocated memory and mempool.

Neil

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
  2014-09-30 11:34     ` Neil Horman
@ 2014-09-30 12:18       ` Bruce Richardson
  2014-09-30 13:39         ` Neil Horman
  0 siblings, 1 reply; 38+ messages in thread
From: Bruce Richardson @ 2014-09-30 12:18 UTC (permalink / raw)
  To: Neil Horman; +Cc: dev

On Tue, Sep 30, 2014 at 07:34:45AM -0400, Neil Horman wrote:
> On Tue, Sep 30, 2014 at 11:39:37AM +0100, reshmapa wrote:
> > From: Reshma Pattan <reshma.pattan@intel.com>
> > 
> > A new sample app that shows the usage of the distributor library. This
> > app works as follows:
> > 
> > * An RX thread runs which pulls packets from each ethernet port in turn
> >   and passes those packets to worker using a distributor component.
> > * The workers take the packets in turn, and determine the output port
> >   for those packets using basic l2forwarding doing an xor on the source
> >   port id.
> > * The RX thread takes the returned packets from the workers and enqueue
> >   those packets into an rte_ring structure.
> > * A TX thread pulls the packets off the rte_ring structure and then
> >   sends each packet out the output port specified previously by the worker
> > * Command-line option support provided only for portmask.
> > 
> > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > Signed-off-by: Reshma Pattan    <reshma.pattan@intel.com>
> > ---
> >  examples/Makefile                 |    1 +
> >  examples/distributor_app/Makefile |   57 ++++
> >  examples/distributor_app/main.c   |  600 +++++++++++++++++++++++++++++++++++++
> >  examples/distributor_app/main.h   |   46 +++
> >  4 files changed, 704 insertions(+), 0 deletions(-)
> >  create mode 100644 examples/distributor_app/Makefile
> >  create mode 100644 examples/distributor_app/main.c
> >  create mode 100644 examples/distributor_app/main.h
> > 
> > diff --git a/examples/Makefile b/examples/Makefile
> > index 6245f83..2ba82b0 100644
> > --- a/examples/Makefile
> > +++ b/examples/Makefile
> > @@ -66,5 +66,6 @@ DIRS-y += vhost
> >  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
> >  DIRS-y += vmdq
> >  DIRS-y += vmdq_dcb
> > +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> >  
> >  include $(RTE_SDK)/mk/rte.extsubdir.mk
> > diff --git a/examples/distributor_app/Makefile b/examples/distributor_app/Makefile
> > new file mode 100644
> > index 0000000..6a5bada
> > --- /dev/null
> > +++ b/examples/distributor_app/Makefile
> > @@ -0,0 +1,57 @@
> > +#   BSD LICENSE
> > +#
> > +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > +#   All rights reserved.
> > +#
> > +#   Redistribution and use in source and binary forms, with or without
> > +#   modification, are permitted provided that the following conditions
> > +#   are met:
> > +#
> > +#     * Redistributions of source code must retain the above copyright
> > +#       notice, this list of conditions and the following disclaimer.
> > +#     * Redistributions in binary form must reproduce the above copyright
> > +#       notice, this list of conditions and the following disclaimer in
> > +#       the documentation and/or other materials provided with the
> > +#       distribution.
> > +#     * Neither the name of Intel Corporation nor the names of its
> > +#       contributors may be used to endorse or promote products derived
> > +#       from this software without specific prior written permission.
> > +#
> > +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> > +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> > +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> > +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> > +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> > +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> > +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> > +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> > +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> > +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > +
> > +ifeq ($(RTE_SDK),)
> > +$(error "Please define RTE_SDK environment variable")
> > +endif
> > +
> > +# Default target, can be overriden by command line or environment
> > +RTE_TARGET ?= x86_64-native-linuxapp-gcc
> > +
> > +include $(RTE_SDK)/mk/rte.vars.mk
> > +
> > +# binary name
> > +APP = distributor_app
> > +
> > +# all source are stored in SRCS-y
> > +SRCS-y := main.c
> > +
> > +CFLAGS += $(WERROR_FLAGS)
> > +
> > +# workaround for a gcc bug with noreturn attribute
> > +# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
> > +CFLAGS_main.o += -Wno-return-type
> > +endif
> > +
> > +EXTRA_CFLAGS += -O3 -Wfatal-errors
> > +
> > +include $(RTE_SDK)/mk/rte.extapp.mk
> > diff --git a/examples/distributor_app/main.c b/examples/distributor_app/main.c
> > new file mode 100644
> > index 0000000..f555d93
> > --- /dev/null
> > +++ b/examples/distributor_app/main.c
> > @@ -0,0 +1,600 @@
> > +/*-
> > + *   BSD LICENSE
> > + *
> > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > + *   All rights reserved.
> > + *
> > + *   Redistribution and use in source and binary forms, with or without
> > + *   modification, are permitted provided that the following conditions
> > + *   are met:
> > + *
> > + *     * Redistributions of source code must retain the above copyright
> > + *       notice, this list of conditions and the following disclaimer.
> > + *     * Redistributions in binary form must reproduce the above copyright
> > + *       notice, this list of conditions and the following disclaimer in
> > + *       the documentation and/or other materials provided with the
> > + *       distribution.
> > + *     * Neither the name of Intel Corporation nor the names of its
> > + *       contributors may be used to endorse or promote products derived
> > + *       from this software without specific prior written permission.
> > + *
> > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > + */
> > +
> > +#include <stdint.h>
> > +#include <inttypes.h>
> > +#include <unistd.h>
> > +#include <signal.h>
> > +#include <getopt.h>
> > +
> > +#include <rte_eal.h>
> > +#include <rte_ethdev.h>
> > +#include <rte_cycles.h>
> > +#include <rte_malloc.h>
> > +#include <rte_debug.h>
> > +#include <rte_distributor.h>
> > +
> > +#include "main.h"
> > +
> > +#define RX_RING_SIZE 256
> > +#define RX_FREE_THRESH 32
> > +#define RX_PTHRESH 8
> > +#define RX_HTHRESH 8
> > +#define RX_WTHRESH 0
> > +
> > +#define TX_RING_SIZE 512
> > +#define TX_FREE_THRESH 32
> > +#define TX_PTHRESH 32
> > +#define TX_HTHRESH 0
> > +#define TX_WTHRESH 0
> > +#define TX_RSBIT_THRESH 32
> > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\
> > +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
> > +	ETH_TXQ_FLAGS_NOXSUMTCP)
> > +
> > +#define NUM_MBUFS ((64*1024)-1)
> > +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
> > +#define MBUF_CACHE_SIZE 250
> > +#define BURST_SIZE 32
> > +#define RTE_RING_SZ 1024
> > +
> > +/* uncommnet below line to enable debug logs */
> > +/* #define DEBUG */
> > +
> > +#ifdef DEBUG
> > +#define LOG_LEVEL RTE_LOG_DEBUG
> > +#define LOG_DEBUG(log_type, fmt, args...) do {	\
> > +	RTE_LOG(DEBUG, log_type, fmt, ##args)		\
> > +} while (0)
> > +#else
> > +#define LOG_LEVEL RTE_LOG_INFO
> > +#define LOG_DEBUG(log_type, fmt, args...) do {} while (0)
> > +#endif
> > +
> > +#define RTE_LOGTYPE_DISTRAPP RTE_LOGTYPE_USER1
> > +
> > +/* mask of enabled ports */
> > +static uint32_t enabled_port_mask = 0;
> > +
> > +static volatile struct app_stats {
> > +	struct {
> > +		uint64_t rx_pkts;
> > +		uint64_t returned_pkts;
> > +		uint64_t enqueued_pkts;
> > +	} rx __rte_cache_aligned;
> > +
> > +	struct {
> > +		uint64_t dequeue_pkts;
> > +		uint64_t tx_pkts;
> > +	} tx __rte_cache_aligned;
> > +} app_stats;
> > +
> > +static const struct rte_eth_conf port_conf_default = {
> > +	.rxmode = {
> > +		.mq_mode = ETH_MQ_RX_RSS,
> > +		.max_rx_pkt_len = ETHER_MAX_LEN,
> > +		.split_hdr_size = 0,
> > +		.header_split   = 0, /**< Header Split disabled */
> > +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> > +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> > +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> > +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> > +	},
> > +	.txmode = {
> > +		.mq_mode = ETH_MQ_TX_NONE,
> > +	},
> > +	.lpbk_mode = 0,
> > +	.rx_adv_conf = {
> > +			.rss_conf = {
> > +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> > +					ETH_RSS_IPV4_TCP | ETH_RSS_IPV4_UDP |
> > +					ETH_RSS_IPV6_TCP | ETH_RSS_IPV6_UDP,
> > +			}
> > +	},
> > +};
> > +
> > +static const struct rte_eth_rxconf rx_conf_default = {
> > +	.rx_thresh = {
> > +		.pthresh = RX_PTHRESH,
> > +		.hthresh = RX_HTHRESH,
> > +		.wthresh = RX_WTHRESH,
> > +	},
> > +	.rx_free_thresh = RX_FREE_THRESH,
> > +	.rx_drop_en = 0,
> > +};
> > +
> > +static const struct rte_eth_txconf tx_conf_default = {
> > +	.tx_thresh = {
> > +		.pthresh = TX_PTHRESH,
> > +		.hthresh = TX_HTHRESH,
> > +		.wthresh = TX_WTHRESH,
> > +	},
> > +	.tx_free_thresh = TX_FREE_THRESH,
> > +	.tx_rs_thresh = TX_RSBIT_THRESH,
> > +	.txq_flags = TX_Q_FLAGS
> > +
> > +};
> > +
> > +struct output_buffer {
> > +	unsigned count;
> > +	struct rte_mbuf *mbufs[BURST_SIZE];
> > +};
> > +
> > +/*
> > + * Initialises a given port using global settings and with the rx buffers
> > + * coming from the mbuf_pool passed as parameter
> > + */
> > +static inline int
> > +port_init(uint8_t port, struct rte_mempool *mbuf_pool)
> > +{
> > +	struct rte_eth_conf port_conf = port_conf_default;
> > +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> > +	int retval;
> > +	uint16_t q;
> > +
> > +	if (port >= rte_eth_dev_count())
> > +		return -1;
> > +
> > +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> > +	if (retval != 0)
> > +		return retval;
> > +
> > +	for (q = 0; q < rxRings; q++) {
> > +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> > +						rte_eth_dev_socket_id(port),
> > +						&rx_conf_default, mbuf_pool);
> > +		if (retval < 0)
> > +			return retval;
> > +	}
> > +
> > +	for (q = 0; q < txRings; q++) {
> > +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> > +						rte_eth_dev_socket_id(port),
> > +						&tx_conf_default);
> > +		if (retval < 0)
> > +			return retval;
> > +	}
> > +
> > +	retval  = rte_eth_dev_start(port);
> > +	if (retval < 0)
> > +		return retval;
> > +
> > +	struct rte_eth_link link;
> > +	rte_eth_link_get_nowait(port, &link);
> > +	if (!link.link_status) {
> > +		sleep(1);
> > +		rte_eth_link_get_nowait(port, &link);
> > +	}
> > +
> > +	if (!link.link_status) {
> > +		printf("Link down on port %"PRIu8"\n", port);
> > +		return 0;
> > +	}
> > +
> > +	struct ether_addr addr;
> > +	rte_eth_macaddr_get(port, &addr);
> > +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> > +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> > +			(unsigned)port,
> > +			addr.addr_bytes[0], addr.addr_bytes[1],
> > +			addr.addr_bytes[2], addr.addr_bytes[3],
> > +			addr.addr_bytes[4], addr.addr_bytes[5]);
> > +
> > +	rte_eth_promiscuous_enable(port);
> > +
> > +	return 0;
> > +}
> > +
> > +struct lcore_params {
> > +	unsigned worker_id;
> > +	struct rte_distributor *d;
> > +	struct rte_ring *r;
> > +};
> > +
> > +static __attribute__((noreturn)) void
> > +lcore_rx(struct lcore_params *p)
> > +{
> > +	struct rte_distributor *d = p->d;
> > +	struct rte_ring *r = p->r;
> > +	const uint8_t nb_ports = rte_eth_dev_count();
> > +	const int socket_id = rte_socket_id();
> > +	uint8_t port;
> > +
> > +	for (port = 0; port < nb_ports; port++) {
> > +		/* skip ports that are not enabled */
> > +		if ((enabled_port_mask & (1 << port)) == 0)
> > +			continue;
> > +
> > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > +				rte_eth_dev_socket_id(port) != socket_id)
> > +			printf("WARNING, port %u is on remote NUMA node to "
> > +					"RX thread.\n\tPerformance will not "
> > +					"be optimal.\n", port);
> > +	}
> > +
> > +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> > +	port = 0;
> > +	for (;;) {
> > +		/* skip ports that are not enabled */
> > +		if ((enabled_port_mask & (1 << port)) == 0) {
> > +			if (++port == nb_ports)
> > +				port = 0;
> > +			continue;
> > +		}
> > +		struct rte_mbuf *bufs[BURST_SIZE*2];
> > +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> > +				BURST_SIZE);
> > +		app_stats.rx.rx_pkts += nb_rx;
> > +
> > +		rte_distributor_process(d, bufs, nb_rx);
> > +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> > +				bufs, BURST_SIZE*2);
> > +		app_stats.rx.returned_pkts += nb_ret;
> > +		if (unlikely(nb_ret == 0))
> > +			continue;
> > +
> > +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs, nb_ret);
> > +		app_stats.rx.enqueued_pkts += sent;
> > +		if (unlikely(sent < nb_ret)) {
> > +			LOG_DEBUG(DISTRAPP, "%s:Packet loss due to full ring\n", __func__);
> > +			while (sent < nb_ret)
> > +				rte_pktmbuf_free(bufs[sent++]);
> > +		}
> > +		if (++port == nb_ports)
> > +			port = 0;
> > +	}
> > +}
> > +
> > +static inline void
> > +flush_one_port(struct output_buffer *outbuf, uint8_t outp)
> > +{
> > +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> > +			outbuf->count);
> > +	app_stats.tx.tx_pkts += nb_tx;
> > +
> > +	if (unlikely(nb_tx < outbuf->count)) {
> > +		LOG_DEBUG(DISTRAPP, "%s:Packet loss with tx_burst\n", __func__);
> > +		do {
> > +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> > +		} while (++nb_tx < outbuf->count);
> > +	}
> > +	outbuf->count = 0;
> > +}
> > +
> > +static inline void
> > +flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
> > +{
> > +	uint8_t outp;
> > +	for (outp = 0; outp < nb_ports; outp++) {
> > +		/* skip ports that are not enabled */
> > +		if ((enabled_port_mask & (1 << outp)) == 0)
> > +			continue;
> > +
> > +		if (tx_buffers[outp].count == 0)
> > +			continue;
> > +
> > +		flush_one_port(&tx_buffers[outp], outp);
> > +	}
> > +}
> > +
> > +static __attribute__((noreturn)) void
> > +lcore_tx(struct rte_ring *in_r)
> > +{
> > +	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
> > +	const uint8_t nb_ports = rte_eth_dev_count();
> > +	const int socket_id = rte_socket_id();
> > +	uint8_t port;
> > +
> > +	for (port = 0; port < nb_ports; port++) {
> > +		/* skip ports that are not enabled */
> > +		if ((enabled_port_mask & (1 << port)) == 0)
> > +			continue;
> > +
> > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > +				rte_eth_dev_socket_id(port) != socket_id)
> > +			printf("WARNING, port %u is on remote NUMA node to "
> > +					"TX thread.\n\tPerformance will not "
> > +					"be optimal.\n", port);
> > +	}
> > +
> > +	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
> > +	for (;;) {
> > +		for (port = 0; port < nb_ports; port++) {
> > +			/* skip ports that are not enabled */
> > +			if ((enabled_port_mask & (1 << port)) == 0)
> > +				continue;
> > +
> > +			struct rte_mbuf *bufs[BURST_SIZE];
> > +			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
> > +					(void *)bufs, BURST_SIZE);
> > +			app_stats.tx.dequeue_pkts += nb_rx;
> > +
> > +			/* if we get no traffic, flush anything we have */
> > +			if (unlikely(nb_rx == 0)) {
> > +				flush_all_ports(tx_buffers, nb_ports);
> > +				continue;
> > +			}
> > +
> > +			/* for traffic we receive, queue it up for transmit */
> > +			uint16_t i;
> > +			_mm_prefetch(bufs[0], 0);
> > +			_mm_prefetch(bufs[1], 0);
> > +			_mm_prefetch(bufs[2], 0);
> > +			for (i = 0; i < nb_rx; i++) {
> > +				struct output_buffer *outbuf;
> > +				uint8_t outp;
> > +				_mm_prefetch(bufs[i + 3], 0);
> > +				/* workers should update in_port to hold the
> > +				 * output port value */
> > +				outp = bufs[i]->port;
> > +				/* skip ports that are not enabled */
> > +				if ((enabled_port_mask & (1 << outp)) == 0)
> > +					continue;
> > +
> > +				outbuf = &tx_buffers[outp];
> > +				outbuf->mbufs[outbuf->count++] = bufs[i];
> > +				if (outbuf->count == BURST_SIZE)
> > +					flush_one_port(outbuf, outp);
> > +			}
> > +		}
> > +	}
> > +}
> > +
> > +
> > +static __attribute__((noreturn)) void
> > +lcore_worker(struct lcore_params *p)
> > +{
> > +	struct rte_distributor *d = p->d;
> > +	const unsigned id = p->worker_id;
> > +	/* for single port, xor_val will be zero so we won't modify the output
> > +	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
> > +	 */
> > +	const unsigned xor_val = (rte_eth_dev_count() > 1);
> > +	struct rte_mbuf *buf = NULL;
> > +
> > +	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
> > +	for (;;) {
> > +		buf = rte_distributor_get_pkt(d, id, buf);
> > +		buf->port ^= xor_val;
> > +	}
> > +}
> > +
> > +static void
> > +int_handler(int sig_num)
> > +{
> > +	struct rte_eth_stats eth_stats;
> > +	unsigned i;
> > +
> > +	printf("Exiting on signal %d\n", sig_num);
> > +
> > +	printf("\nRX thread stats:\n");
> > +	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
> > +	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
> > +	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
> > +
> > +	printf("\nTX thread stats:\n");
> > +	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
> > +	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
> > +
> > +	for (i = 0; i < rte_eth_dev_count(); i++) {
> > +		rte_eth_stats_get(i, &eth_stats);
> > +		printf("\nPort %u stats:\n", i);
> > +		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
> > +		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
> > +		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
> > +		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
> > +		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
> > +	}
> > +	exit(0);
> rte_exit here?  Also, this is a pretty ungraceful exit strategy as all the
> threads you've created and memory you've allocated are just forgotten here.
> Given that dpdk mempools are shared, this has the potential to leak lots of
> memory if other apps are using the dpdk at the same time that you run this.  You
> probably want to use the sigint handler to raise a flag to the tx/rx threads to
> shutdown gracefully, and then free your allocated memory and mempool.
> 
> Neil
>

Unless the different processes are explicitly cooperating as 
primary/secondary, the mempools are not shared. I just don't see the need 
for this app to do more cleanup on ctrl-c signal, as it's not intended to be 
a multiprocess app, and there is little that any secondary process could do 
to work with this app, except possibly some resource monitoring, which would 
be completely unaffected by it exiting the way it does.

/Bruce

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
  2014-09-30 12:18       ` Bruce Richardson
@ 2014-09-30 13:39         ` Neil Horman
  2014-10-01 14:47           ` Pattan, Reshma
  0 siblings, 1 reply; 38+ messages in thread
From: Neil Horman @ 2014-09-30 13:39 UTC (permalink / raw)
  To: Bruce Richardson; +Cc: dev

On Tue, Sep 30, 2014 at 01:18:28PM +0100, Bruce Richardson wrote:
> On Tue, Sep 30, 2014 at 07:34:45AM -0400, Neil Horman wrote:
> > On Tue, Sep 30, 2014 at 11:39:37AM +0100, reshmapa wrote:
> > > From: Reshma Pattan <reshma.pattan@intel.com>
> > > 
> > > A new sample app that shows the usage of the distributor library. This
> > > app works as follows:
> > > 
> > > * An RX thread runs which pulls packets from each ethernet port in turn
> > >   and passes those packets to worker using a distributor component.
> > > * The workers take the packets in turn, and determine the output port
> > >   for those packets using basic l2forwarding doing an xor on the source
> > >   port id.
> > > * The RX thread takes the returned packets from the workers and enqueue
> > >   those packets into an rte_ring structure.
> > > * A TX thread pulls the packets off the rte_ring structure and then
> > >   sends each packet out the output port specified previously by the worker
> > > * Command-line option support provided only for portmask.
> > > 
> > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > > Signed-off-by: Reshma Pattan    <reshma.pattan@intel.com>
> > > ---
> > >  examples/Makefile                 |    1 +
> > >  examples/distributor_app/Makefile |   57 ++++
> > >  examples/distributor_app/main.c   |  600 +++++++++++++++++++++++++++++++++++++
> > >  examples/distributor_app/main.h   |   46 +++
> > >  4 files changed, 704 insertions(+), 0 deletions(-)
> > >  create mode 100644 examples/distributor_app/Makefile
> > >  create mode 100644 examples/distributor_app/main.c
> > >  create mode 100644 examples/distributor_app/main.h
> > > 
> > > diff --git a/examples/Makefile b/examples/Makefile
> > > index 6245f83..2ba82b0 100644
> > > --- a/examples/Makefile
> > > +++ b/examples/Makefile
> > > @@ -66,5 +66,6 @@ DIRS-y += vhost
> > >  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
> > >  DIRS-y += vmdq
> > >  DIRS-y += vmdq_dcb
> > > +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> > >  
> > >  include $(RTE_SDK)/mk/rte.extsubdir.mk
> > > diff --git a/examples/distributor_app/Makefile b/examples/distributor_app/Makefile
> > > new file mode 100644
> > > index 0000000..6a5bada
> > > --- /dev/null
> > > +++ b/examples/distributor_app/Makefile
> > > @@ -0,0 +1,57 @@
> > > +#   BSD LICENSE
> > > +#
> > > +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > +#   All rights reserved.
> > > +#
> > > +#   Redistribution and use in source and binary forms, with or without
> > > +#   modification, are permitted provided that the following conditions
> > > +#   are met:
> > > +#
> > > +#     * Redistributions of source code must retain the above copyright
> > > +#       notice, this list of conditions and the following disclaimer.
> > > +#     * Redistributions in binary form must reproduce the above copyright
> > > +#       notice, this list of conditions and the following disclaimer in
> > > +#       the documentation and/or other materials provided with the
> > > +#       distribution.
> > > +#     * Neither the name of Intel Corporation nor the names of its
> > > +#       contributors may be used to endorse or promote products derived
> > > +#       from this software without specific prior written permission.
> > > +#
> > > +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> > > +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> > > +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> > > +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> > > +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> > > +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> > > +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> > > +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> > > +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > > +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> > > +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > > +
> > > +ifeq ($(RTE_SDK),)
> > > +$(error "Please define RTE_SDK environment variable")
> > > +endif
> > > +
> > > +# Default target, can be overriden by command line or environment
> > > +RTE_TARGET ?= x86_64-native-linuxapp-gcc
> > > +
> > > +include $(RTE_SDK)/mk/rte.vars.mk
> > > +
> > > +# binary name
> > > +APP = distributor_app
> > > +
> > > +# all source are stored in SRCS-y
> > > +SRCS-y := main.c
> > > +
> > > +CFLAGS += $(WERROR_FLAGS)
> > > +
> > > +# workaround for a gcc bug with noreturn attribute
> > > +# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> > > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
> > > +CFLAGS_main.o += -Wno-return-type
> > > +endif
> > > +
> > > +EXTRA_CFLAGS += -O3 -Wfatal-errors
> > > +
> > > +include $(RTE_SDK)/mk/rte.extapp.mk
> > > diff --git a/examples/distributor_app/main.c b/examples/distributor_app/main.c
> > > new file mode 100644
> > > index 0000000..f555d93
> > > --- /dev/null
> > > +++ b/examples/distributor_app/main.c
> > > @@ -0,0 +1,600 @@
> > > +/*-
> > > + *   BSD LICENSE
> > > + *
> > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > + *   All rights reserved.
> > > + *
> > > + *   Redistribution and use in source and binary forms, with or without
> > > + *   modification, are permitted provided that the following conditions
> > > + *   are met:
> > > + *
> > > + *     * Redistributions of source code must retain the above copyright
> > > + *       notice, this list of conditions and the following disclaimer.
> > > + *     * Redistributions in binary form must reproduce the above copyright
> > > + *       notice, this list of conditions and the following disclaimer in
> > > + *       the documentation and/or other materials provided with the
> > > + *       distribution.
> > > + *     * Neither the name of Intel Corporation nor the names of its
> > > + *       contributors may be used to endorse or promote products derived
> > > + *       from this software without specific prior written permission.
> > > + *
> > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > > + */
> > > +
> > > +#include <stdint.h>
> > > +#include <inttypes.h>
> > > +#include <unistd.h>
> > > +#include <signal.h>
> > > +#include <getopt.h>
> > > +
> > > +#include <rte_eal.h>
> > > +#include <rte_ethdev.h>
> > > +#include <rte_cycles.h>
> > > +#include <rte_malloc.h>
> > > +#include <rte_debug.h>
> > > +#include <rte_distributor.h>
> > > +
> > > +#include "main.h"
> > > +
> > > +#define RX_RING_SIZE 256
> > > +#define RX_FREE_THRESH 32
> > > +#define RX_PTHRESH 8
> > > +#define RX_HTHRESH 8
> > > +#define RX_WTHRESH 0
> > > +
> > > +#define TX_RING_SIZE 512
> > > +#define TX_FREE_THRESH 32
> > > +#define TX_PTHRESH 32
> > > +#define TX_HTHRESH 0
> > > +#define TX_WTHRESH 0
> > > +#define TX_RSBIT_THRESH 32
> > > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\
> > > +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
> > > +	ETH_TXQ_FLAGS_NOXSUMTCP)
> > > +
> > > +#define NUM_MBUFS ((64*1024)-1)
> > > +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
> > > +#define MBUF_CACHE_SIZE 250
> > > +#define BURST_SIZE 32
> > > +#define RTE_RING_SZ 1024
> > > +
> > > +/* uncommnet below line to enable debug logs */
> > > +/* #define DEBUG */
> > > +
> > > +#ifdef DEBUG
> > > +#define LOG_LEVEL RTE_LOG_DEBUG
> > > +#define LOG_DEBUG(log_type, fmt, args...) do {	\
> > > +	RTE_LOG(DEBUG, log_type, fmt, ##args)		\
> > > +} while (0)
> > > +#else
> > > +#define LOG_LEVEL RTE_LOG_INFO
> > > +#define LOG_DEBUG(log_type, fmt, args...) do {} while (0)
> > > +#endif
> > > +
> > > +#define RTE_LOGTYPE_DISTRAPP RTE_LOGTYPE_USER1
> > > +
> > > +/* mask of enabled ports */
> > > +static uint32_t enabled_port_mask = 0;
> > > +
> > > +static volatile struct app_stats {
> > > +	struct {
> > > +		uint64_t rx_pkts;
> > > +		uint64_t returned_pkts;
> > > +		uint64_t enqueued_pkts;
> > > +	} rx __rte_cache_aligned;
> > > +
> > > +	struct {
> > > +		uint64_t dequeue_pkts;
> > > +		uint64_t tx_pkts;
> > > +	} tx __rte_cache_aligned;
> > > +} app_stats;
> > > +
> > > +static const struct rte_eth_conf port_conf_default = {
> > > +	.rxmode = {
> > > +		.mq_mode = ETH_MQ_RX_RSS,
> > > +		.max_rx_pkt_len = ETHER_MAX_LEN,
> > > +		.split_hdr_size = 0,
> > > +		.header_split   = 0, /**< Header Split disabled */
> > > +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> > > +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> > > +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> > > +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> > > +	},
> > > +	.txmode = {
> > > +		.mq_mode = ETH_MQ_TX_NONE,
> > > +	},
> > > +	.lpbk_mode = 0,
> > > +	.rx_adv_conf = {
> > > +			.rss_conf = {
> > > +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> > > +					ETH_RSS_IPV4_TCP | ETH_RSS_IPV4_UDP |
> > > +					ETH_RSS_IPV6_TCP | ETH_RSS_IPV6_UDP,
> > > +			}
> > > +	},
> > > +};
> > > +
> > > +static const struct rte_eth_rxconf rx_conf_default = {
> > > +	.rx_thresh = {
> > > +		.pthresh = RX_PTHRESH,
> > > +		.hthresh = RX_HTHRESH,
> > > +		.wthresh = RX_WTHRESH,
> > > +	},
> > > +	.rx_free_thresh = RX_FREE_THRESH,
> > > +	.rx_drop_en = 0,
> > > +};
> > > +
> > > +static const struct rte_eth_txconf tx_conf_default = {
> > > +	.tx_thresh = {
> > > +		.pthresh = TX_PTHRESH,
> > > +		.hthresh = TX_HTHRESH,
> > > +		.wthresh = TX_WTHRESH,
> > > +	},
> > > +	.tx_free_thresh = TX_FREE_THRESH,
> > > +	.tx_rs_thresh = TX_RSBIT_THRESH,
> > > +	.txq_flags = TX_Q_FLAGS
> > > +
> > > +};
> > > +
> > > +struct output_buffer {
> > > +	unsigned count;
> > > +	struct rte_mbuf *mbufs[BURST_SIZE];
> > > +};
> > > +
> > > +/*
> > > + * Initialises a given port using global settings and with the rx buffers
> > > + * coming from the mbuf_pool passed as parameter
> > > + */
> > > +static inline int
> > > +port_init(uint8_t port, struct rte_mempool *mbuf_pool)
> > > +{
> > > +	struct rte_eth_conf port_conf = port_conf_default;
> > > +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> > > +	int retval;
> > > +	uint16_t q;
> > > +
> > > +	if (port >= rte_eth_dev_count())
> > > +		return -1;
> > > +
> > > +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> > > +	if (retval != 0)
> > > +		return retval;
> > > +
> > > +	for (q = 0; q < rxRings; q++) {
> > > +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> > > +						rte_eth_dev_socket_id(port),
> > > +						&rx_conf_default, mbuf_pool);
> > > +		if (retval < 0)
> > > +			return retval;
> > > +	}
> > > +
> > > +	for (q = 0; q < txRings; q++) {
> > > +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> > > +						rte_eth_dev_socket_id(port),
> > > +						&tx_conf_default);
> > > +		if (retval < 0)
> > > +			return retval;
> > > +	}
> > > +
> > > +	retval  = rte_eth_dev_start(port);
> > > +	if (retval < 0)
> > > +		return retval;
> > > +
> > > +	struct rte_eth_link link;
> > > +	rte_eth_link_get_nowait(port, &link);
> > > +	if (!link.link_status) {
> > > +		sleep(1);
> > > +		rte_eth_link_get_nowait(port, &link);
> > > +	}
> > > +
> > > +	if (!link.link_status) {
> > > +		printf("Link down on port %"PRIu8"\n", port);
> > > +		return 0;
> > > +	}
> > > +
> > > +	struct ether_addr addr;
> > > +	rte_eth_macaddr_get(port, &addr);
> > > +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> > > +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> > > +			(unsigned)port,
> > > +			addr.addr_bytes[0], addr.addr_bytes[1],
> > > +			addr.addr_bytes[2], addr.addr_bytes[3],
> > > +			addr.addr_bytes[4], addr.addr_bytes[5]);
> > > +
> > > +	rte_eth_promiscuous_enable(port);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +struct lcore_params {
> > > +	unsigned worker_id;
> > > +	struct rte_distributor *d;
> > > +	struct rte_ring *r;
> > > +};
> > > +
> > > +static __attribute__((noreturn)) void
> > > +lcore_rx(struct lcore_params *p)
> > > +{
> > > +	struct rte_distributor *d = p->d;
> > > +	struct rte_ring *r = p->r;
> > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > +	const int socket_id = rte_socket_id();
> > > +	uint8_t port;
> > > +
> > > +	for (port = 0; port < nb_ports; port++) {
> > > +		/* skip ports that are not enabled */
> > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > +			continue;
> > > +
> > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > +			printf("WARNING, port %u is on remote NUMA node to "
> > > +					"RX thread.\n\tPerformance will not "
> > > +					"be optimal.\n", port);
> > > +	}
> > > +
> > > +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> > > +	port = 0;
> > > +	for (;;) {
> > > +		/* skip ports that are not enabled */
> > > +		if ((enabled_port_mask & (1 << port)) == 0) {
> > > +			if (++port == nb_ports)
> > > +				port = 0;
> > > +			continue;
> > > +		}
> > > +		struct rte_mbuf *bufs[BURST_SIZE*2];
> > > +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> > > +				BURST_SIZE);
> > > +		app_stats.rx.rx_pkts += nb_rx;
> > > +
> > > +		rte_distributor_process(d, bufs, nb_rx);
> > > +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> > > +				bufs, BURST_SIZE*2);
> > > +		app_stats.rx.returned_pkts += nb_ret;
> > > +		if (unlikely(nb_ret == 0))
> > > +			continue;
> > > +
> > > +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs, nb_ret);
> > > +		app_stats.rx.enqueued_pkts += sent;
> > > +		if (unlikely(sent < nb_ret)) {
> > > +			LOG_DEBUG(DISTRAPP, "%s:Packet loss due to full ring\n", __func__);
> > > +			while (sent < nb_ret)
> > > +				rte_pktmbuf_free(bufs[sent++]);
> > > +		}
> > > +		if (++port == nb_ports)
> > > +			port = 0;
> > > +	}
> > > +}
> > > +
> > > +static inline void
> > > +flush_one_port(struct output_buffer *outbuf, uint8_t outp)
> > > +{
> > > +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> > > +			outbuf->count);
> > > +	app_stats.tx.tx_pkts += nb_tx;
> > > +
> > > +	if (unlikely(nb_tx < outbuf->count)) {
> > > +		LOG_DEBUG(DISTRAPP, "%s:Packet loss with tx_burst\n", __func__);
> > > +		do {
> > > +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> > > +		} while (++nb_tx < outbuf->count);
> > > +	}
> > > +	outbuf->count = 0;
> > > +}
> > > +
> > > +static inline void
> > > +flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
> > > +{
> > > +	uint8_t outp;
> > > +	for (outp = 0; outp < nb_ports; outp++) {
> > > +		/* skip ports that are not enabled */
> > > +		if ((enabled_port_mask & (1 << outp)) == 0)
> > > +			continue;
> > > +
> > > +		if (tx_buffers[outp].count == 0)
> > > +			continue;
> > > +
> > > +		flush_one_port(&tx_buffers[outp], outp);
> > > +	}
> > > +}
> > > +
> > > +static __attribute__((noreturn)) void
> > > +lcore_tx(struct rte_ring *in_r)
> > > +{
> > > +	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
> > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > +	const int socket_id = rte_socket_id();
> > > +	uint8_t port;
> > > +
> > > +	for (port = 0; port < nb_ports; port++) {
> > > +		/* skip ports that are not enabled */
> > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > +			continue;
> > > +
> > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > +			printf("WARNING, port %u is on remote NUMA node to "
> > > +					"TX thread.\n\tPerformance will not "
> > > +					"be optimal.\n", port);
> > > +	}
> > > +
> > > +	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
> > > +	for (;;) {
> > > +		for (port = 0; port < nb_ports; port++) {
> > > +			/* skip ports that are not enabled */
> > > +			if ((enabled_port_mask & (1 << port)) == 0)
> > > +				continue;
> > > +
> > > +			struct rte_mbuf *bufs[BURST_SIZE];
> > > +			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
> > > +					(void *)bufs, BURST_SIZE);
> > > +			app_stats.tx.dequeue_pkts += nb_rx;
> > > +
> > > +			/* if we get no traffic, flush anything we have */
> > > +			if (unlikely(nb_rx == 0)) {
> > > +				flush_all_ports(tx_buffers, nb_ports);
> > > +				continue;
> > > +			}
> > > +
> > > +			/* for traffic we receive, queue it up for transmit */
> > > +			uint16_t i;
> > > +			_mm_prefetch(bufs[0], 0);
> > > +			_mm_prefetch(bufs[1], 0);
> > > +			_mm_prefetch(bufs[2], 0);
> > > +			for (i = 0; i < nb_rx; i++) {
> > > +				struct output_buffer *outbuf;
> > > +				uint8_t outp;
> > > +				_mm_prefetch(bufs[i + 3], 0);
> > > +				/* workers should update in_port to hold the
> > > +				 * output port value */
> > > +				outp = bufs[i]->port;
> > > +				/* skip ports that are not enabled */
> > > +				if ((enabled_port_mask & (1 << outp)) == 0)
> > > +					continue;
> > > +
> > > +				outbuf = &tx_buffers[outp];
> > > +				outbuf->mbufs[outbuf->count++] = bufs[i];
> > > +				if (outbuf->count == BURST_SIZE)
> > > +					flush_one_port(outbuf, outp);
> > > +			}
> > > +		}
> > > +	}
> > > +}
> > > +
> > > +
> > > +static __attribute__((noreturn)) void
> > > +lcore_worker(struct lcore_params *p)
> > > +{
> > > +	struct rte_distributor *d = p->d;
> > > +	const unsigned id = p->worker_id;
> > > +	/* for single port, xor_val will be zero so we won't modify the output
> > > +	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
> > > +	 */
> > > +	const unsigned xor_val = (rte_eth_dev_count() > 1);
> > > +	struct rte_mbuf *buf = NULL;
> > > +
> > > +	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
> > > +	for (;;) {
> > > +		buf = rte_distributor_get_pkt(d, id, buf);
> > > +		buf->port ^= xor_val;
> > > +	}
> > > +}
> > > +
> > > +static void
> > > +int_handler(int sig_num)
> > > +{
> > > +	struct rte_eth_stats eth_stats;
> > > +	unsigned i;
> > > +
> > > +	printf("Exiting on signal %d\n", sig_num);
> > > +
> > > +	printf("\nRX thread stats:\n");
> > > +	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
> > > +	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
> > > +	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
> > > +
> > > +	printf("\nTX thread stats:\n");
> > > +	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
> > > +	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
> > > +
> > > +	for (i = 0; i < rte_eth_dev_count(); i++) {
> > > +		rte_eth_stats_get(i, &eth_stats);
> > > +		printf("\nPort %u stats:\n", i);
> > > +		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
> > > +		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
> > > +		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
> > > +		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
> > > +		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
> > > +	}
> > > +	exit(0);
> > rte_exit here?  Also, this is a pretty ungraceful exit strategy as all the
> > threads you've created and memory you've allocated are just forgotten here.
> > Given that dpdk mempools are shared, this has the potential to leak lots of
> > memory if other apps are using the dpdk at the same time that you run this.  You
> > probably want to use the sigint handler to raise a flag to the tx/rx threads to
> > shutdown gracefully, and then free your allocated memory and mempool.
> > 
> > Neil
> >
> 
> Unless the different processes are explicitly cooperating as 
> primary/secondary, the mempools are not shared. I just don't see the need 
> for this app to do more cleanup on ctrl-c signal, as it's not intended to be 
> a multiprocess app, and there is little that any secondary process could do 
> to work with this app, except possibly some resource monitoring, which would 
> be completely unaffected by it exiting the way it does.
> 
Ah, ok, so we don't use a common shared pool between isolated processes then,
thats good.  Still though, this is a sample application, I think its lazy
programming practice to illustrate to application developers that its generally
ok to exit programs without freeing your resources.  Its about 20 lines of
additional code to change the sigint handler to flag an exit condition, and have
all the other threads join on it.

Neil

> /Bruce
> 

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [dpdk-dev] [PATCH v4] distributor_app: gracefull shutdown of tx/rx threads on SIGINT
  2014-09-30 10:39   ` [dpdk-dev] [PATCH v3] " reshmapa
  2014-09-30 11:34     ` Neil Horman
@ 2014-10-01 13:33     ` reshmapa
  2014-10-01 13:46       ` Pattan, Reshma
                         ` (2 more replies)
  1 sibling, 3 replies; 38+ messages in thread
From: reshmapa @ 2014-10-01 13:33 UTC (permalink / raw)
  To: dev

From: Reshma Pattan <reshma.pattan@intel.com>

	*Handled gracefull shutdown of rx and tx threads upon SIGINT.
	*Gracefull shutdown of worker threads will be handled in
	 future enhancements.

	Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
---
 examples/distributor_app/main.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/examples/distributor_app/main.c b/examples/distributor_app/main.c
index f555d93..b6fa063 100644
--- a/examples/distributor_app/main.c
+++ b/examples/distributor_app/main.c
@@ -85,6 +85,7 @@
 
 /* mask of enabled ports */
 static uint32_t enabled_port_mask = 0;
+volatile uint8_t quit_signal = 0;
 
 static volatile struct app_stats {
 	struct {
@@ -221,7 +222,7 @@ struct lcore_params {
 	struct rte_ring *r;
 };
 
-static __attribute__((noreturn)) void
+static int
 lcore_rx(struct lcore_params *p)
 {
 	struct rte_distributor *d = p->d;
@@ -244,7 +245,7 @@ lcore_rx(struct lcore_params *p)
 
 	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
 	port = 0;
-	for (;;) {
+	while (!quit_signal) {
 		/* skip ports that are not enabled */
 		if ((enabled_port_mask & (1 << port)) == 0) {
 			if (++port == nb_ports)
@@ -307,7 +308,7 @@ flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
 	}
 }
 
-static __attribute__((noreturn)) void
+static int
 lcore_tx(struct rte_ring *in_r)
 {
 	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
@@ -328,7 +329,7 @@ lcore_tx(struct rte_ring *in_r)
 	}
 
 	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
-	for (;;) {
+	while (!quit_signal) {
 		for (port = 0; port < nb_ports; port++) {
 			/* skip ports that are not enabled */
 			if ((enabled_port_mask & (1 << port)) == 0)
@@ -370,7 +371,6 @@ lcore_tx(struct rte_ring *in_r)
 	}
 }
 
-
 static __attribute__((noreturn)) void
 lcore_worker(struct lcore_params *p)
 {
@@ -415,7 +415,7 @@ int_handler(int sig_num)
 		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
 		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
 	}
-	exit(0);
+	quit_signal = 1;
 }
 
 /* display usage */
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v4] distributor_app: gracefull shutdown of tx/rx threads on SIGINT
  2014-10-01 13:33     ` [dpdk-dev] [PATCH v4] distributor_app: gracefull shutdown of tx/rx threads on SIGINT reshmapa
@ 2014-10-01 13:46       ` Pattan, Reshma
  2014-10-01 13:49       ` Thomas Monjalon
  2014-10-01 14:33       ` [dpdk-dev] [PATCH v5] distributor_app: new sample app reshmapa
  2 siblings, 0 replies; 38+ messages in thread
From: Pattan, Reshma @ 2014-10-01 13:46 UTC (permalink / raw)
  To: dev

Self-NAK. 
Reason: Incomplete patch.
Will send updated next version soon.

-----Original Message-----
From: Pattan, Reshma 
Sent: Wednesday, October 1, 2014 2:34 PM
To: dev@dpdk.org
Cc: Pattan, Reshma
Subject: [PATCH v4] distributor_app: gracefull shutdown of tx/rx threads on SIGINT

From: Reshma Pattan <reshma.pattan@intel.com>

	*Handled gracefull shutdown of rx and tx threads upon SIGINT.
	*Gracefull shutdown of worker threads will be handled in
	 future enhancements.

	Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
---
 examples/distributor_app/main.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/examples/distributor_app/main.c b/examples/distributor_app/main.c index f555d93..b6fa063 100644
--- a/examples/distributor_app/main.c
+++ b/examples/distributor_app/main.c
@@ -85,6 +85,7 @@
 
 /* mask of enabled ports */
 static uint32_t enabled_port_mask = 0;
+volatile uint8_t quit_signal = 0;
 
 static volatile struct app_stats {
 	struct {
@@ -221,7 +222,7 @@ struct lcore_params {
 	struct rte_ring *r;
 };
 
-static __attribute__((noreturn)) void
+static int
 lcore_rx(struct lcore_params *p)
 {
 	struct rte_distributor *d = p->d;
@@ -244,7 +245,7 @@ lcore_rx(struct lcore_params *p)
 
 	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
 	port = 0;
-	for (;;) {
+	while (!quit_signal) {
 		/* skip ports that are not enabled */
 		if ((enabled_port_mask & (1 << port)) == 0) {
 			if (++port == nb_ports)
@@ -307,7 +308,7 @@ flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
 	}
 }
 
-static __attribute__((noreturn)) void
+static int
 lcore_tx(struct rte_ring *in_r)
 {
 	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS]; @@ -328,7 +329,7 @@ lcore_tx(struct rte_ring *in_r)
 	}
 
 	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
-	for (;;) {
+	while (!quit_signal) {
 		for (port = 0; port < nb_ports; port++) {
 			/* skip ports that are not enabled */
 			if ((enabled_port_mask & (1 << port)) == 0) @@ -370,7 +371,6 @@ lcore_tx(struct rte_ring *in_r)
 	}
 }
 
-
 static __attribute__((noreturn)) void
 lcore_worker(struct lcore_params *p)
 {
@@ -415,7 +415,7 @@ int_handler(int sig_num)
 		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
 		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
 	}
-	exit(0);
+	quit_signal = 1;
 }
 
 /* display usage */
--
1.7.4.1

--------------------------------------------------------------
Intel Shannon Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263
Business address: Dromore House, East Park, Shannon, Co. Clare

This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v4] distributor_app: gracefull shutdown of tx/rx threads on SIGINT
  2014-10-01 13:33     ` [dpdk-dev] [PATCH v4] distributor_app: gracefull shutdown of tx/rx threads on SIGINT reshmapa
  2014-10-01 13:46       ` Pattan, Reshma
@ 2014-10-01 13:49       ` Thomas Monjalon
  2014-10-01 14:33       ` [dpdk-dev] [PATCH v5] distributor_app: new sample app reshmapa
  2 siblings, 0 replies; 38+ messages in thread
From: Thomas Monjalon @ 2014-10-01 13:49 UTC (permalink / raw)
  To: reshmapa; +Cc: dev

> 	*Handled gracefull shutdown of rx and tx threads upon SIGINT.
> 	*Gracefull shutdown of worker threads will be handled in
> 	 future enhancements.
> 
> 	Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>

You have sent a patch which depends of the previous one, right?
It's OK but for next time, please consider these guidelines:
- You should mention that it depends of another pending patch (with its title)
- You should not increment the version number (v4) as it doesn't supersed the
  previous one. It's v1 for this patch so no number is required.

Thanks
-- 
Thomas

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [dpdk-dev] [PATCH v5] distributor_app: new sample app
  2014-10-01 13:33     ` [dpdk-dev] [PATCH v4] distributor_app: gracefull shutdown of tx/rx threads on SIGINT reshmapa
  2014-10-01 13:46       ` Pattan, Reshma
  2014-10-01 13:49       ` Thomas Monjalon
@ 2014-10-01 14:33       ` reshmapa
  2014-10-17 13:59         ` [dpdk-dev] [PATCH v6] " Reshma Pattan
  2 siblings, 1 reply; 38+ messages in thread
From: reshmapa @ 2014-10-01 14:33 UTC (permalink / raw)
  To: dev

From: Reshma Pattan <reshma.pattan@intel.com>

A new sample app that shows the usage of the distributor library. This
app works as follows:

* An RX thread runs which pulls packets from each ethernet port in turn
  and passes those packets to worker using a distributor component.
* The workers take the packets in turn, and determine the output port
  for those packets using basic l2forwarding doing an xor on the source
  port id.
* The RX thread takes the returned packets from the workers and enqueue
  those packets into an rte_ring structure.
* A TX thread pulls the packets off the rte_ring structure and then
  sends each packet out the output port specified previously by the worker
* Command-line option support provided only for portmask.

v5 change:
* Handled gracefull shutdown of rx and tx threads upon SIGINT.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
---
 examples/Makefile                 |    1 +
 examples/distributor_app/Makefile |   57 ++++
 examples/distributor_app/main.c   |  600 +++++++++++++++++++++++++++++++++++++
 examples/distributor_app/main.h   |   46 +++
 4 files changed, 704 insertions(+), 0 deletions(-)
 create mode 100644 examples/distributor_app/Makefile
 create mode 100644 examples/distributor_app/main.c
 create mode 100644 examples/distributor_app/main.h

diff --git a/examples/Makefile b/examples/Makefile
index 6245f83..2ba82b0 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -66,5 +66,6 @@ DIRS-y += vhost
 DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
 DIRS-y += vmdq
 DIRS-y += vmdq_dcb
+DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
 
 include $(RTE_SDK)/mk/rte.extsubdir.mk
diff --git a/examples/distributor_app/Makefile b/examples/distributor_app/Makefile
new file mode 100644
index 0000000..6a5bada
--- /dev/null
+++ b/examples/distributor_app/Makefile
@@ -0,0 +1,57 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = distributor_app
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+EXTRA_CFLAGS += -O3 -Wfatal-errors
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/distributor_app/main.c b/examples/distributor_app/main.c
new file mode 100644
index 0000000..b6fa063
--- /dev/null
+++ b/examples/distributor_app/main.c
@@ -0,0 +1,600 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <signal.h>
+#include <getopt.h>
+
+#include <rte_eal.h>
+#include <rte_ethdev.h>
+#include <rte_cycles.h>
+#include <rte_malloc.h>
+#include <rte_debug.h>
+#include <rte_distributor.h>
+
+#include "main.h"
+
+#define RX_RING_SIZE 256
+#define RX_FREE_THRESH 32
+#define RX_PTHRESH 8
+#define RX_HTHRESH 8
+#define RX_WTHRESH 0
+
+#define TX_RING_SIZE 512
+#define TX_FREE_THRESH 32
+#define TX_PTHRESH 32
+#define TX_HTHRESH 0
+#define TX_WTHRESH 0
+#define TX_RSBIT_THRESH 32
+#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\
+	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
+	ETH_TXQ_FLAGS_NOXSUMTCP)
+
+#define NUM_MBUFS ((64*1024)-1)
+#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_CACHE_SIZE 250
+#define BURST_SIZE 32
+#define RTE_RING_SZ 1024
+
+/* uncommnet below line to enable debug logs */
+/* #define DEBUG */
+
+#ifdef DEBUG
+#define LOG_LEVEL RTE_LOG_DEBUG
+#define LOG_DEBUG(log_type, fmt, args...) do {	\
+	RTE_LOG(DEBUG, log_type, fmt, ##args)		\
+} while (0)
+#else
+#define LOG_LEVEL RTE_LOG_INFO
+#define LOG_DEBUG(log_type, fmt, args...) do {} while (0)
+#endif
+
+#define RTE_LOGTYPE_DISTRAPP RTE_LOGTYPE_USER1
+
+/* mask of enabled ports */
+static uint32_t enabled_port_mask = 0;
+volatile uint8_t quit_signal = 0;
+
+static volatile struct app_stats {
+	struct {
+		uint64_t rx_pkts;
+		uint64_t returned_pkts;
+		uint64_t enqueued_pkts;
+	} rx __rte_cache_aligned;
+
+	struct {
+		uint64_t dequeue_pkts;
+		uint64_t tx_pkts;
+	} tx __rte_cache_aligned;
+} app_stats;
+
+static const struct rte_eth_conf port_conf_default = {
+	.rxmode = {
+		.mq_mode = ETH_MQ_RX_RSS,
+		.max_rx_pkt_len = ETHER_MAX_LEN,
+		.split_hdr_size = 0,
+		.header_split   = 0, /**< Header Split disabled */
+		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
+		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
+		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
+		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
+	},
+	.txmode = {
+		.mq_mode = ETH_MQ_TX_NONE,
+	},
+	.lpbk_mode = 0,
+	.rx_adv_conf = {
+			.rss_conf = {
+				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
+					ETH_RSS_IPV4_TCP | ETH_RSS_IPV4_UDP |
+					ETH_RSS_IPV6_TCP | ETH_RSS_IPV6_UDP,
+			}
+	},
+};
+
+static const struct rte_eth_rxconf rx_conf_default = {
+	.rx_thresh = {
+		.pthresh = RX_PTHRESH,
+		.hthresh = RX_HTHRESH,
+		.wthresh = RX_WTHRESH,
+	},
+	.rx_free_thresh = RX_FREE_THRESH,
+	.rx_drop_en = 0,
+};
+
+static const struct rte_eth_txconf tx_conf_default = {
+	.tx_thresh = {
+		.pthresh = TX_PTHRESH,
+		.hthresh = TX_HTHRESH,
+		.wthresh = TX_WTHRESH,
+	},
+	.tx_free_thresh = TX_FREE_THRESH,
+	.tx_rs_thresh = TX_RSBIT_THRESH,
+	.txq_flags = TX_Q_FLAGS
+
+};
+
+struct output_buffer {
+	unsigned count;
+	struct rte_mbuf *mbufs[BURST_SIZE];
+};
+
+/*
+ * Initialises a given port using global settings and with the rx buffers
+ * coming from the mbuf_pool passed as parameter
+ */
+static inline int
+port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+{
+	struct rte_eth_conf port_conf = port_conf_default;
+	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
+	int retval;
+	uint16_t q;
+
+	if (port >= rte_eth_dev_count())
+		return -1;
+
+	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
+	if (retval != 0)
+		return retval;
+
+	for (q = 0; q < rxRings; q++) {
+		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
+						rte_eth_dev_socket_id(port),
+						&rx_conf_default, mbuf_pool);
+		if (retval < 0)
+			return retval;
+	}
+
+	for (q = 0; q < txRings; q++) {
+		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
+						rte_eth_dev_socket_id(port),
+						&tx_conf_default);
+		if (retval < 0)
+			return retval;
+	}
+
+	retval  = rte_eth_dev_start(port);
+	if (retval < 0)
+		return retval;
+
+	struct rte_eth_link link;
+	rte_eth_link_get_nowait(port, &link);
+	if (!link.link_status) {
+		sleep(1);
+		rte_eth_link_get_nowait(port, &link);
+	}
+
+	if (!link.link_status) {
+		printf("Link down on port %"PRIu8"\n", port);
+		return 0;
+	}
+
+	struct ether_addr addr;
+	rte_eth_macaddr_get(port, &addr);
+	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
+			(unsigned)port,
+			addr.addr_bytes[0], addr.addr_bytes[1],
+			addr.addr_bytes[2], addr.addr_bytes[3],
+			addr.addr_bytes[4], addr.addr_bytes[5]);
+
+	rte_eth_promiscuous_enable(port);
+
+	return 0;
+}
+
+struct lcore_params {
+	unsigned worker_id;
+	struct rte_distributor *d;
+	struct rte_ring *r;
+};
+
+static int
+lcore_rx(struct lcore_params *p)
+{
+	struct rte_distributor *d = p->d;
+	struct rte_ring *r = p->r;
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const int socket_id = rte_socket_id();
+	uint8_t port;
+
+	for (port = 0; port < nb_ports; port++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0)
+			continue;
+
+		if (rte_eth_dev_socket_id(port) > 0 &&
+				rte_eth_dev_socket_id(port) != socket_id)
+			printf("WARNING, port %u is on remote NUMA node to "
+					"RX thread.\n\tPerformance will not "
+					"be optimal.\n", port);
+	}
+
+	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
+	port = 0;
+	while (!quit_signal) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0) {
+			if (++port == nb_ports)
+				port = 0;
+			continue;
+		}
+		struct rte_mbuf *bufs[BURST_SIZE*2];
+		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
+				BURST_SIZE);
+		app_stats.rx.rx_pkts += nb_rx;
+
+		rte_distributor_process(d, bufs, nb_rx);
+		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
+				bufs, BURST_SIZE*2);
+		app_stats.rx.returned_pkts += nb_ret;
+		if (unlikely(nb_ret == 0))
+			continue;
+
+		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs, nb_ret);
+		app_stats.rx.enqueued_pkts += sent;
+		if (unlikely(sent < nb_ret)) {
+			LOG_DEBUG(DISTRAPP, "%s:Packet loss due to full ring\n", __func__);
+			while (sent < nb_ret)
+				rte_pktmbuf_free(bufs[sent++]);
+		}
+		if (++port == nb_ports)
+			port = 0;
+	}
+}
+
+static inline void
+flush_one_port(struct output_buffer *outbuf, uint8_t outp)
+{
+	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
+			outbuf->count);
+	app_stats.tx.tx_pkts += nb_tx;
+
+	if (unlikely(nb_tx < outbuf->count)) {
+		LOG_DEBUG(DISTRAPP, "%s:Packet loss with tx_burst\n", __func__);
+		do {
+			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
+		} while (++nb_tx < outbuf->count);
+	}
+	outbuf->count = 0;
+}
+
+static inline void
+flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
+{
+	uint8_t outp;
+	for (outp = 0; outp < nb_ports; outp++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << outp)) == 0)
+			continue;
+
+		if (tx_buffers[outp].count == 0)
+			continue;
+
+		flush_one_port(&tx_buffers[outp], outp);
+	}
+}
+
+static int
+lcore_tx(struct rte_ring *in_r)
+{
+	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const int socket_id = rte_socket_id();
+	uint8_t port;
+
+	for (port = 0; port < nb_ports; port++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0)
+			continue;
+
+		if (rte_eth_dev_socket_id(port) > 0 &&
+				rte_eth_dev_socket_id(port) != socket_id)
+			printf("WARNING, port %u is on remote NUMA node to "
+					"TX thread.\n\tPerformance will not "
+					"be optimal.\n", port);
+	}
+
+	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
+	while (!quit_signal) {
+		for (port = 0; port < nb_ports; port++) {
+			/* skip ports that are not enabled */
+			if ((enabled_port_mask & (1 << port)) == 0)
+				continue;
+
+			struct rte_mbuf *bufs[BURST_SIZE];
+			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
+					(void *)bufs, BURST_SIZE);
+			app_stats.tx.dequeue_pkts += nb_rx;
+
+			/* if we get no traffic, flush anything we have */
+			if (unlikely(nb_rx == 0)) {
+				flush_all_ports(tx_buffers, nb_ports);
+				continue;
+			}
+
+			/* for traffic we receive, queue it up for transmit */
+			uint16_t i;
+			_mm_prefetch(bufs[0], 0);
+			_mm_prefetch(bufs[1], 0);
+			_mm_prefetch(bufs[2], 0);
+			for (i = 0; i < nb_rx; i++) {
+				struct output_buffer *outbuf;
+				uint8_t outp;
+				_mm_prefetch(bufs[i + 3], 0);
+				/* workers should update in_port to hold the
+				 * output port value */
+				outp = bufs[i]->port;
+				/* skip ports that are not enabled */
+				if ((enabled_port_mask & (1 << outp)) == 0)
+					continue;
+
+				outbuf = &tx_buffers[outp];
+				outbuf->mbufs[outbuf->count++] = bufs[i];
+				if (outbuf->count == BURST_SIZE)
+					flush_one_port(outbuf, outp);
+			}
+		}
+	}
+}
+
+static __attribute__((noreturn)) void
+lcore_worker(struct lcore_params *p)
+{
+	struct rte_distributor *d = p->d;
+	const unsigned id = p->worker_id;
+	/* for single port, xor_val will be zero so we won't modify the output
+	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
+	 */
+	const unsigned xor_val = (rte_eth_dev_count() > 1);
+	struct rte_mbuf *buf = NULL;
+
+	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
+	for (;;) {
+		buf = rte_distributor_get_pkt(d, id, buf);
+		buf->port ^= xor_val;
+	}
+}
+
+static void
+int_handler(int sig_num)
+{
+	struct rte_eth_stats eth_stats;
+	unsigned i;
+
+	printf("Exiting on signal %d\n", sig_num);
+
+	printf("\nRX thread stats:\n");
+	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
+	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
+	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
+
+	printf("\nTX thread stats:\n");
+	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
+	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
+
+	for (i = 0; i < rte_eth_dev_count(); i++) {
+		rte_eth_stats_get(i, &eth_stats);
+		printf("\nPort %u stats:\n", i);
+		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
+		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
+		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
+		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
+		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
+	}
+	quit_signal = 1;
+}
+
+/* display usage */
+static void
+print_usage(const char *prgname)
+{
+	printf("%s [EAL options] -- -p PORTMASK\n"
+			"  -p PORTMASK: hexadecimal bitmask of ports to configure\n",
+			prgname);
+}
+
+static int
+parse_portmask(const char *portmask)
+{
+	char *end = NULL;
+	unsigned long pm;
+
+	/* parse hexadecimal string */
+	pm = strtoul(portmask, &end, 16);
+	if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+		return -1;
+
+	if (pm == 0)
+		return -1;
+
+	return pm;
+}
+
+/* Parse the argument given in the command line of the application */
+static int
+parse_args(int argc, char **argv)
+{
+	int opt;
+	char **argvopt;
+	int option_index;
+	char *prgname = argv[0];
+	static struct option lgopts[] = {
+		{NULL, 0, 0, 0}
+	};
+
+	argvopt = argv;
+
+	while ((opt = getopt_long(argc, argvopt, "p:",
+			lgopts, &option_index)) != EOF) {
+
+		switch (opt) {
+			/* portmask */
+			case 'p':
+				enabled_port_mask = parse_portmask(optarg);
+				if (enabled_port_mask == 0) {
+					printf("invalid portmask\n");
+					print_usage(prgname);
+					return -1;
+				}
+				break;
+
+			default:
+				print_usage(prgname);
+				return -1;
+		}
+	}
+
+if (optind <= 1) {
+	print_usage(prgname);
+	return -1;
+}
+
+	argv[optind-1] = prgname;
+
+	optind = 0; /* reset getopt lib */
+	return 0;
+}
+
+/* Main function, does initialization and calls the per-lcore functions */
+int
+MAIN(int argc, char *argv[])
+{
+	struct rte_mempool *mbuf_pool;
+	struct rte_distributor *d;
+	struct rte_ring *output_ring;
+	unsigned lcore_id, worker_id = 0;
+	unsigned nb_ports;
+	uint8_t portid;
+	uint8_t nb_ports_available;
+
+	/* catch ctrl-c so we can print on exit */
+	signal(SIGINT, int_handler);
+
+	/* init EAL */
+	int ret = rte_eal_init(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+	argc -= ret;
+	argv += ret;
+
+	/* parse application arguments (after the EAL ones) */
+	ret = parse_args(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "Invalid distributor parameters\n");
+
+	if (rte_lcore_count() < 3)
+		rte_exit(EXIT_FAILURE, "Error, This application needs at "
+				"least 3 logical cores to run:\n"
+				"1 lcore for packet RX and distribution\n"
+				"1 lcore for packet TX\n"
+				"and at least 1 lcore for worker threads\n");
+
+	if (rte_eal_pci_probe() != 0)
+		rte_exit(EXIT_FAILURE, "Error with PCI probing\n");
+
+	nb_ports = rte_eth_dev_count();
+	if (nb_ports == 0)
+		rte_exit(EXIT_FAILURE, "Error: no ethernet ports detected\n");
+	if (nb_ports != 1 && (nb_ports & 1))
+		rte_exit(EXIT_FAILURE, "Error: number of ports must be even, except "
+				"when using a single port\n");
+
+	mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
+			MBUF_SIZE, MBUF_CACHE_SIZE,
+			sizeof(struct rte_pktmbuf_pool_private),
+			rte_pktmbuf_pool_init, NULL,
+			rte_pktmbuf_init, NULL,
+			rte_socket_id(), 0);
+	if (mbuf_pool == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+	nb_ports_available = nb_ports;
+
+	/* initialize all ports */
+	for (portid = 0; portid < nb_ports; portid++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << portid)) == 0) {
+			printf("\nSkipping disabled port %d\n", portid);
+			nb_ports_available--;
+			continue;
+		}
+		/* init port */
+		printf("Initializing port %u... done\n", (unsigned) portid);
+
+		if (port_init(portid, mbuf_pool) != 0)
+			rte_exit(EXIT_FAILURE, "Cannot initialize port %"PRIu8"\n",
+					portid);
+	}
+
+	if (!nb_ports_available) {
+		rte_exit(EXIT_FAILURE,
+				"All available ports are disabled. Please set portmask.\n");
+	}
+
+	d = rte_distributor_create("PKT_DIST", rte_socket_id(),
+			rte_lcore_count() - 2);
+	if (d == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create distributor\n");
+
+	/* scheduler ring is read only by the transmitter core, but written to
+	 * by multiple threads
+	 */
+	output_ring = rte_ring_create("Output_ring", RTE_RING_SZ,
+			rte_socket_id(), RING_F_SC_DEQ);
+	if (output_ring == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create output ring\n");
+
+	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+		if (worker_id == rte_lcore_count() - 2)
+			rte_eal_remote_launch((lcore_function_t *)lcore_tx,
+					output_ring, lcore_id);
+		else {
+			struct lcore_params *p =
+					rte_malloc(NULL, sizeof(*p), 0);
+			if (!p)
+				rte_panic("malloc failure\n");
+			*p = (struct lcore_params){worker_id, d, output_ring};
+			rte_eal_remote_launch((lcore_function_t *)lcore_worker,
+					p, lcore_id);
+		}
+		worker_id++;
+	}
+	/* call lcore_main on master core only */
+	struct lcore_params p = { 0, d, output_ring };
+	lcore_rx(&p);
+	return 0;
+}
diff --git a/examples/distributor_app/main.h b/examples/distributor_app/main.h
new file mode 100644
index 0000000..2682d15
--- /dev/null
+++ b/examples/distributor_app/main.h
@@ -0,0 +1,46 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char *argv[]);
+
+#endif /* ifndef _MAIN_H_ */
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
  2014-09-30 13:39         ` Neil Horman
@ 2014-10-01 14:47           ` Pattan, Reshma
  2014-10-01 14:56             ` Neil Horman
  0 siblings, 1 reply; 38+ messages in thread
From: Pattan, Reshma @ 2014-10-01 14:47 UTC (permalink / raw)
  To: Neil Horman; +Cc: dev



> -----Original Message-----
> From: Neil Horman [mailto:nhorman@tuxdriver.com]
> Sent: Tuesday, September 30, 2014 2:40 PM
> To: Richardson, Bruce
> Cc: Pattan, Reshma; dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
> 
> On Tue, Sep 30, 2014 at 01:18:28PM +0100, Bruce Richardson wrote:
> > On Tue, Sep 30, 2014 at 07:34:45AM -0400, Neil Horman wrote:
> > > On Tue, Sep 30, 2014 at 11:39:37AM +0100, reshmapa wrote:
> > > > From: Reshma Pattan <reshma.pattan@intel.com>
> > > >
> > > > A new sample app that shows the usage of the distributor library.
> > > > This app works as follows:
> > > >
> > > > * An RX thread runs which pulls packets from each ethernet port in turn
> > > >   and passes those packets to worker using a distributor component.
> > > > * The workers take the packets in turn, and determine the output port
> > > >   for those packets using basic l2forwarding doing an xor on the source
> > > >   port id.
> > > > * The RX thread takes the returned packets from the workers and enqueue
> > > >   those packets into an rte_ring structure.
> > > > * A TX thread pulls the packets off the rte_ring structure and then
> > > >   sends each packet out the output port specified previously by
> > > > the worker
> > > > * Command-line option support provided only for portmask.
> > > >
> > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > > > Signed-off-by: Reshma Pattan    <reshma.pattan@intel.com>
> > > > ---
> > > >  examples/Makefile                 |    1 +
> > > >  examples/distributor_app/Makefile |   57 ++++
> > > >  examples/distributor_app/main.c   |  600
> +++++++++++++++++++++++++++++++++++++
> > > >  examples/distributor_app/main.h   |   46 +++
> > > >  4 files changed, 704 insertions(+), 0 deletions(-)  create mode
> > > > 100644 examples/distributor_app/Makefile  create mode 100644
> > > > examples/distributor_app/main.c  create mode 100644
> > > > examples/distributor_app/main.h
> > > >
> > > > diff --git a/examples/Makefile b/examples/Makefile index
> > > > 6245f83..2ba82b0 100644
> > > > --- a/examples/Makefile
> > > > +++ b/examples/Makefile
> > > > @@ -66,5 +66,6 @@ DIRS-y += vhost
> > > >  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen  DIRS-y += vmdq
> > > > DIRS-y += vmdq_dcb
> > > > +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> > > >
> > > >  include $(RTE_SDK)/mk/rte.extsubdir.mk diff --git
> > > > a/examples/distributor_app/Makefile
> > > > b/examples/distributor_app/Makefile
> > > > new file mode 100644
> > > > index 0000000..6a5bada
> > > > --- /dev/null
> > > > +++ b/examples/distributor_app/Makefile
> > > > @@ -0,0 +1,57 @@
> > > > +#   BSD LICENSE
> > > > +#
> > > > +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > +#   All rights reserved.
> > > > +#
> > > > +#   Redistribution and use in source and binary forms, with or without
> > > > +#   modification, are permitted provided that the following conditions
> > > > +#   are met:
> > > > +#
> > > > +#     * Redistributions of source code must retain the above copyright
> > > > +#       notice, this list of conditions and the following disclaimer.
> > > > +#     * Redistributions in binary form must reproduce the above copyright
> > > > +#       notice, this list of conditions and the following disclaimer in
> > > > +#       the documentation and/or other materials provided with the
> > > > +#       distribution.
> > > > +#     * Neither the name of Intel Corporation nor the names of its
> > > > +#       contributors may be used to endorse or promote products derived
> > > > +#       from this software without specific prior written permission.
> > > > +#
> > > > +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> > > > +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> > > > +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> > > > +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> > > > +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> > > > +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> BUT NOT
> > > > +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> LOSS OF USE,
> > > > +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> > > > +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> > > > +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
> OF THE USE
> > > > +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> > > > +
> > > > +ifeq ($(RTE_SDK),)
> > > > +$(error "Please define RTE_SDK environment variable") endif
> > > > +
> > > > +# Default target, can be overriden by command line or environment
> > > > +RTE_TARGET ?= x86_64-native-linuxapp-gcc
> > > > +
> > > > +include $(RTE_SDK)/mk/rte.vars.mk
> > > > +
> > > > +# binary name
> > > > +APP = distributor_app
> > > > +
> > > > +# all source are stored in SRCS-y SRCS-y := main.c
> > > > +
> > > > +CFLAGS += $(WERROR_FLAGS)
> > > > +
> > > > +# workaround for a gcc bug with noreturn attribute #
> > > > +http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> > > > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) CFLAGS_main.o +=
> > > > +-Wno-return-type endif
> > > > +
> > > > +EXTRA_CFLAGS += -O3 -Wfatal-errors
> > > > +
> > > > +include $(RTE_SDK)/mk/rte.extapp.mk
> > > > diff --git a/examples/distributor_app/main.c
> > > > b/examples/distributor_app/main.c new file mode 100644 index
> > > > 0000000..f555d93
> > > > --- /dev/null
> > > > +++ b/examples/distributor_app/main.c
> > > > @@ -0,0 +1,600 @@
> > > > +/*-
> > > > + *   BSD LICENSE
> > > > + *
> > > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > + *   All rights reserved.
> > > > + *
> > > > + *   Redistribution and use in source and binary forms, with or without
> > > > + *   modification, are permitted provided that the following conditions
> > > > + *   are met:
> > > > + *
> > > > + *     * Redistributions of source code must retain the above copyright
> > > > + *       notice, this list of conditions and the following disclaimer.
> > > > + *     * Redistributions in binary form must reproduce the above copyright
> > > > + *       notice, this list of conditions and the following disclaimer in
> > > > + *       the documentation and/or other materials provided with the
> > > > + *       distribution.
> > > > + *     * Neither the name of Intel Corporation nor the names of its
> > > > + *       contributors may be used to endorse or promote products derived
> > > > + *       from this software without specific prior written permission.
> > > > + *
> > > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> > > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
> BUT NOT
> > > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> > > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> > > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> > > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> BUT NOT
> > > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> LOSS OF USE,
> > > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> > > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> > > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
> OF THE USE
> > > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> > > > + */
> > > > +
> > > > +#include <stdint.h>
> > > > +#include <inttypes.h>
> > > > +#include <unistd.h>
> > > > +#include <signal.h>
> > > > +#include <getopt.h>
> > > > +
> > > > +#include <rte_eal.h>
> > > > +#include <rte_ethdev.h>
> > > > +#include <rte_cycles.h>
> > > > +#include <rte_malloc.h>
> > > > +#include <rte_debug.h>
> > > > +#include <rte_distributor.h>
> > > > +
> > > > +#include "main.h"
> > > > +
> > > > +#define RX_RING_SIZE 256
> > > > +#define RX_FREE_THRESH 32
> > > > +#define RX_PTHRESH 8
> > > > +#define RX_HTHRESH 8
> > > > +#define RX_WTHRESH 0
> > > > +
> > > > +#define TX_RING_SIZE 512
> > > > +#define TX_FREE_THRESH 32
> > > > +#define TX_PTHRESH 32
> > > > +#define TX_HTHRESH 0
> > > > +#define TX_WTHRESH 0
> > > > +#define TX_RSBIT_THRESH 32
> > > > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS |
> ETH_TXQ_FLAGS_NOVLANOFFL |\
> > > > +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
> > > > +	ETH_TXQ_FLAGS_NOXSUMTCP)
> > > > +
> > > > +#define NUM_MBUFS ((64*1024)-1)
> > > > +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) +
> > > > +RTE_PKTMBUF_HEADROOM) #define MBUF_CACHE_SIZE 250 #define
> > > > +BURST_SIZE 32 #define RTE_RING_SZ 1024
> > > > +
> > > > +/* uncommnet below line to enable debug logs */
> > > > +/* #define DEBUG */
> > > > +
> > > > +#ifdef DEBUG
> > > > +#define LOG_LEVEL RTE_LOG_DEBUG
> > > > +#define LOG_DEBUG(log_type, fmt, args...) do {	\
> > > > +	RTE_LOG(DEBUG, log_type, fmt, ##args)		\
> > > > +} while (0)
> > > > +#else
> > > > +#define LOG_LEVEL RTE_LOG_INFO
> > > > +#define LOG_DEBUG(log_type, fmt, args...) do {} while (0) #endif
> > > > +
> > > > +#define RTE_LOGTYPE_DISTRAPP RTE_LOGTYPE_USER1
> > > > +
> > > > +/* mask of enabled ports */
> > > > +static uint32_t enabled_port_mask = 0;
> > > > +
> > > > +static volatile struct app_stats {
> > > > +	struct {
> > > > +		uint64_t rx_pkts;
> > > > +		uint64_t returned_pkts;
> > > > +		uint64_t enqueued_pkts;
> > > > +	} rx __rte_cache_aligned;
> > > > +
> > > > +	struct {
> > > > +		uint64_t dequeue_pkts;
> > > > +		uint64_t tx_pkts;
> > > > +	} tx __rte_cache_aligned;
> > > > +} app_stats;
> > > > +
> > > > +static const struct rte_eth_conf port_conf_default = {
> > > > +	.rxmode = {
> > > > +		.mq_mode = ETH_MQ_RX_RSS,
> > > > +		.max_rx_pkt_len = ETHER_MAX_LEN,
> > > > +		.split_hdr_size = 0,
> > > > +		.header_split   = 0, /**< Header Split disabled */
> > > > +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> > > > +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> > > > +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> > > > +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> > > > +	},
> > > > +	.txmode = {
> > > > +		.mq_mode = ETH_MQ_TX_NONE,
> > > > +	},
> > > > +	.lpbk_mode = 0,
> > > > +	.rx_adv_conf = {
> > > > +			.rss_conf = {
> > > > +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> > > > +					ETH_RSS_IPV4_TCP |
> ETH_RSS_IPV4_UDP |
> > > > +					ETH_RSS_IPV6_TCP |
> ETH_RSS_IPV6_UDP,
> > > > +			}
> > > > +	},
> > > > +};
> > > > +
> > > > +static const struct rte_eth_rxconf rx_conf_default = {
> > > > +	.rx_thresh = {
> > > > +		.pthresh = RX_PTHRESH,
> > > > +		.hthresh = RX_HTHRESH,
> > > > +		.wthresh = RX_WTHRESH,
> > > > +	},
> > > > +	.rx_free_thresh = RX_FREE_THRESH,
> > > > +	.rx_drop_en = 0,
> > > > +};
> > > > +
> > > > +static const struct rte_eth_txconf tx_conf_default = {
> > > > +	.tx_thresh = {
> > > > +		.pthresh = TX_PTHRESH,
> > > > +		.hthresh = TX_HTHRESH,
> > > > +		.wthresh = TX_WTHRESH,
> > > > +	},
> > > > +	.tx_free_thresh = TX_FREE_THRESH,
> > > > +	.tx_rs_thresh = TX_RSBIT_THRESH,
> > > > +	.txq_flags = TX_Q_FLAGS
> > > > +
> > > > +};
> > > > +
> > > > +struct output_buffer {
> > > > +	unsigned count;
> > > > +	struct rte_mbuf *mbufs[BURST_SIZE]; };
> > > > +
> > > > +/*
> > > > + * Initialises a given port using global settings and with the rx
> > > > +buffers
> > > > + * coming from the mbuf_pool passed as parameter  */ static
> > > > +inline int port_init(uint8_t port, struct rte_mempool *mbuf_pool)
> > > > +{
> > > > +	struct rte_eth_conf port_conf = port_conf_default;
> > > > +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> > > > +	int retval;
> > > > +	uint16_t q;
> > > > +
> > > > +	if (port >= rte_eth_dev_count())
> > > > +		return -1;
> > > > +
> > > > +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> > > > +	if (retval != 0)
> > > > +		return retval;
> > > > +
> > > > +	for (q = 0; q < rxRings; q++) {
> > > > +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> > > > +						rte_eth_dev_socket_id(port),
> > > > +						&rx_conf_default, mbuf_pool);
> > > > +		if (retval < 0)
> > > > +			return retval;
> > > > +	}
> > > > +
> > > > +	for (q = 0; q < txRings; q++) {
> > > > +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> > > > +						rte_eth_dev_socket_id(port),
> > > > +						&tx_conf_default);
> > > > +		if (retval < 0)
> > > > +			return retval;
> > > > +	}
> > > > +
> > > > +	retval  = rte_eth_dev_start(port);
> > > > +	if (retval < 0)
> > > > +		return retval;
> > > > +
> > > > +	struct rte_eth_link link;
> > > > +	rte_eth_link_get_nowait(port, &link);
> > > > +	if (!link.link_status) {
> > > > +		sleep(1);
> > > > +		rte_eth_link_get_nowait(port, &link);
> > > > +	}
> > > > +
> > > > +	if (!link.link_status) {
> > > > +		printf("Link down on port %"PRIu8"\n", port);
> > > > +		return 0;
> > > > +	}
> > > > +
> > > > +	struct ether_addr addr;
> > > > +	rte_eth_macaddr_get(port, &addr);
> > > > +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> > > > +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> > > > +			(unsigned)port,
> > > > +			addr.addr_bytes[0], addr.addr_bytes[1],
> > > > +			addr.addr_bytes[2], addr.addr_bytes[3],
> > > > +			addr.addr_bytes[4], addr.addr_bytes[5]);
> > > > +
> > > > +	rte_eth_promiscuous_enable(port);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +struct lcore_params {
> > > > +	unsigned worker_id;
> > > > +	struct rte_distributor *d;
> > > > +	struct rte_ring *r;
> > > > +};
> > > > +
> > > > +static __attribute__((noreturn)) void lcore_rx(struct
> > > > +lcore_params *p) {
> > > > +	struct rte_distributor *d = p->d;
> > > > +	struct rte_ring *r = p->r;
> > > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > > +	const int socket_id = rte_socket_id();
> > > > +	uint8_t port;
> > > > +
> > > > +	for (port = 0; port < nb_ports; port++) {
> > > > +		/* skip ports that are not enabled */
> > > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > > +			continue;
> > > > +
> > > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > > +			printf("WARNING, port %u is on remote NUMA node to
> "
> > > > +					"RX thread.\n\tPerformance will not "
> > > > +					"be optimal.\n", port);
> > > > +	}
> > > > +
> > > > +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> > > > +	port = 0;
> > > > +	for (;;) {
> > > > +		/* skip ports that are not enabled */
> > > > +		if ((enabled_port_mask & (1 << port)) == 0) {
> > > > +			if (++port == nb_ports)
> > > > +				port = 0;
> > > > +			continue;
> > > > +		}
> > > > +		struct rte_mbuf *bufs[BURST_SIZE*2];
> > > > +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> > > > +				BURST_SIZE);
> > > > +		app_stats.rx.rx_pkts += nb_rx;
> > > > +
> > > > +		rte_distributor_process(d, bufs, nb_rx);
> > > > +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> > > > +				bufs, BURST_SIZE*2);
> > > > +		app_stats.rx.returned_pkts += nb_ret;
> > > > +		if (unlikely(nb_ret == 0))
> > > > +			continue;
> > > > +
> > > > +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs, nb_ret);
> > > > +		app_stats.rx.enqueued_pkts += sent;
> > > > +		if (unlikely(sent < nb_ret)) {
> > > > +			LOG_DEBUG(DISTRAPP, "%s:Packet loss due to full
> ring\n", __func__);
> > > > +			while (sent < nb_ret)
> > > > +				rte_pktmbuf_free(bufs[sent++]);
> > > > +		}
> > > > +		if (++port == nb_ports)
> > > > +			port = 0;
> > > > +	}
> > > > +}
> > > > +
> > > > +static inline void
> > > > +flush_one_port(struct output_buffer *outbuf, uint8_t outp) {
> > > > +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> > > > +			outbuf->count);
> > > > +	app_stats.tx.tx_pkts += nb_tx;
> > > > +
> > > > +	if (unlikely(nb_tx < outbuf->count)) {
> > > > +		LOG_DEBUG(DISTRAPP, "%s:Packet loss with tx_burst\n",
> __func__);
> > > > +		do {
> > > > +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> > > > +		} while (++nb_tx < outbuf->count);
> > > > +	}
> > > > +	outbuf->count = 0;
> > > > +}
> > > > +
> > > > +static inline void
> > > > +flush_all_ports(struct output_buffer *tx_buffers, uint8_t
> > > > +nb_ports) {
> > > > +	uint8_t outp;
> > > > +	for (outp = 0; outp < nb_ports; outp++) {
> > > > +		/* skip ports that are not enabled */
> > > > +		if ((enabled_port_mask & (1 << outp)) == 0)
> > > > +			continue;
> > > > +
> > > > +		if (tx_buffers[outp].count == 0)
> > > > +			continue;
> > > > +
> > > > +		flush_one_port(&tx_buffers[outp], outp);
> > > > +	}
> > > > +}
> > > > +
> > > > +static __attribute__((noreturn)) void lcore_tx(struct rte_ring
> > > > +*in_r) {
> > > > +	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
> > > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > > +	const int socket_id = rte_socket_id();
> > > > +	uint8_t port;
> > > > +
> > > > +	for (port = 0; port < nb_ports; port++) {
> > > > +		/* skip ports that are not enabled */
> > > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > > +			continue;
> > > > +
> > > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > > +			printf("WARNING, port %u is on remote NUMA node to
> "
> > > > +					"TX thread.\n\tPerformance will not "
> > > > +					"be optimal.\n", port);
> > > > +	}
> > > > +
> > > > +	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
> > > > +	for (;;) {
> > > > +		for (port = 0; port < nb_ports; port++) {
> > > > +			/* skip ports that are not enabled */
> > > > +			if ((enabled_port_mask & (1 << port)) == 0)
> > > > +				continue;
> > > > +
> > > > +			struct rte_mbuf *bufs[BURST_SIZE];
> > > > +			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
> > > > +					(void *)bufs, BURST_SIZE);
> > > > +			app_stats.tx.dequeue_pkts += nb_rx;
> > > > +
> > > > +			/* if we get no traffic, flush anything we have */
> > > > +			if (unlikely(nb_rx == 0)) {
> > > > +				flush_all_ports(tx_buffers, nb_ports);
> > > > +				continue;
> > > > +			}
> > > > +
> > > > +			/* for traffic we receive, queue it up for transmit */
> > > > +			uint16_t i;
> > > > +			_mm_prefetch(bufs[0], 0);
> > > > +			_mm_prefetch(bufs[1], 0);
> > > > +			_mm_prefetch(bufs[2], 0);
> > > > +			for (i = 0; i < nb_rx; i++) {
> > > > +				struct output_buffer *outbuf;
> > > > +				uint8_t outp;
> > > > +				_mm_prefetch(bufs[i + 3], 0);
> > > > +				/* workers should update in_port to hold the
> > > > +				 * output port value */
> > > > +				outp = bufs[i]->port;
> > > > +				/* skip ports that are not enabled */
> > > > +				if ((enabled_port_mask & (1 << outp)) == 0)
> > > > +					continue;
> > > > +
> > > > +				outbuf = &tx_buffers[outp];
> > > > +				outbuf->mbufs[outbuf->count++] = bufs[i];
> > > > +				if (outbuf->count == BURST_SIZE)
> > > > +					flush_one_port(outbuf, outp);
> > > > +			}
> > > > +		}
> > > > +	}
> > > > +}
> > > > +
> > > > +
> > > > +static __attribute__((noreturn)) void lcore_worker(struct
> > > > +lcore_params *p) {
> > > > +	struct rte_distributor *d = p->d;
> > > > +	const unsigned id = p->worker_id;
> > > > +	/* for single port, xor_val will be zero so we won't modify the output
> > > > +	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
> > > > +	 */
> > > > +	const unsigned xor_val = (rte_eth_dev_count() > 1);
> > > > +	struct rte_mbuf *buf = NULL;
> > > > +
> > > > +	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
> > > > +	for (;;) {
> > > > +		buf = rte_distributor_get_pkt(d, id, buf);
> > > > +		buf->port ^= xor_val;
> > > > +	}
> > > > +}
> > > > +
> > > > +static void
> > > > +int_handler(int sig_num)
> > > > +{
> > > > +	struct rte_eth_stats eth_stats;
> > > > +	unsigned i;
> > > > +
> > > > +	printf("Exiting on signal %d\n", sig_num);
> > > > +
> > > > +	printf("\nRX thread stats:\n");
> > > > +	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
> > > > +	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
> > > > +	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
> > > > +
> > > > +	printf("\nTX thread stats:\n");
> > > > +	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
> > > > +	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
> > > > +
> > > > +	for (i = 0; i < rte_eth_dev_count(); i++) {
> > > > +		rte_eth_stats_get(i, &eth_stats);
> > > > +		printf("\nPort %u stats:\n", i);
> > > > +		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
> > > > +		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
> > > > +		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
> > > > +		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
> > > > +		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
> > > > +	}
> > > > +	exit(0);
> > > rte_exit here?  Also, this is a pretty ungraceful exit strategy as
> > > all the threads you've created and memory you've allocated are just
> forgotten here.
> > > Given that dpdk mempools are shared, this has the potential to leak
> > > lots of memory if other apps are using the dpdk at the same time
> > > that you run this.  You probably want to use the sigint handler to
> > > raise a flag to the tx/rx threads to shutdown gracefully, and then free your
> allocated memory and mempool.
> > >
> > > Neil
> > >
> >
> > Unless the different processes are explicitly cooperating as
> > primary/secondary, the mempools are not shared. I just don't see the
> > need for this app to do more cleanup on ctrl-c signal, as it's not
> > intended to be a multiprocess app, and there is little that any
> > secondary process could do to work with this app, except possibly some
> > resource monitoring, which would be completely unaffected by it exiting the
> way it does.
> >
> Ah, ok, so we don't use a common shared pool between isolated processes
> then, thats good.  Still though, this is a sample application, I think its lazy
> programming practice to illustrate to application developers that its generally ok
> to exit programs without freeing your resources.  Its about 20 lines of additional
> code to change the sigint handler to flag an exit condition, and have all the
> other threads join on it.
> 
> Neil

1)I had sent v5 patch which handles graceful shutdown of rx and tx threads upon SIGINT
2)Worker thread graceful shutdown was not handled as of now as it needs some change in lcore_worker logic , which will be done in future enhancements.
3)Freeing of mempool is also not handled , as the framework support is not available.
4)Cleaning of rx/tx queues not done, as it needs some extensive logic which we haven't planned as of now. Will check the possibility of doing it in future  enhancements    i.e in next version of sample application.

/Reshma

> 
> > /Bruce
> >


--------------------------------------------------------------
Intel Shannon Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263
Business address: Dromore House, East Park, Shannon, Co. Clare

This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
  2014-10-01 14:47           ` Pattan, Reshma
@ 2014-10-01 14:56             ` Neil Horman
  2014-10-01 15:37               ` Bruce Richardson
  0 siblings, 1 reply; 38+ messages in thread
From: Neil Horman @ 2014-10-01 14:56 UTC (permalink / raw)
  To: Pattan, Reshma; +Cc: dev

On Wed, Oct 01, 2014 at 02:47:00PM +0000, Pattan, Reshma wrote:
> 
> 
> > -----Original Message-----
> > From: Neil Horman [mailto:nhorman@tuxdriver.com]
> > Sent: Tuesday, September 30, 2014 2:40 PM
> > To: Richardson, Bruce
> > Cc: Pattan, Reshma; dev@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
> > 
> > On Tue, Sep 30, 2014 at 01:18:28PM +0100, Bruce Richardson wrote:
> > > On Tue, Sep 30, 2014 at 07:34:45AM -0400, Neil Horman wrote:
> > > > On Tue, Sep 30, 2014 at 11:39:37AM +0100, reshmapa wrote:
> > > > > From: Reshma Pattan <reshma.pattan@intel.com>
> > > > >
> > > > > A new sample app that shows the usage of the distributor library.
> > > > > This app works as follows:
> > > > >
> > > > > * An RX thread runs which pulls packets from each ethernet port in turn
> > > > >   and passes those packets to worker using a distributor component.
> > > > > * The workers take the packets in turn, and determine the output port
> > > > >   for those packets using basic l2forwarding doing an xor on the source
> > > > >   port id.
> > > > > * The RX thread takes the returned packets from the workers and enqueue
> > > > >   those packets into an rte_ring structure.
> > > > > * A TX thread pulls the packets off the rte_ring structure and then
> > > > >   sends each packet out the output port specified previously by
> > > > > the worker
> > > > > * Command-line option support provided only for portmask.
> > > > >
> > > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > > > > Signed-off-by: Reshma Pattan    <reshma.pattan@intel.com>
> > > > > ---
> > > > >  examples/Makefile                 |    1 +
> > > > >  examples/distributor_app/Makefile |   57 ++++
> > > > >  examples/distributor_app/main.c   |  600
> > +++++++++++++++++++++++++++++++++++++
> > > > >  examples/distributor_app/main.h   |   46 +++
> > > > >  4 files changed, 704 insertions(+), 0 deletions(-)  create mode
> > > > > 100644 examples/distributor_app/Makefile  create mode 100644
> > > > > examples/distributor_app/main.c  create mode 100644
> > > > > examples/distributor_app/main.h
> > > > >
> > > > > diff --git a/examples/Makefile b/examples/Makefile index
> > > > > 6245f83..2ba82b0 100644
> > > > > --- a/examples/Makefile
> > > > > +++ b/examples/Makefile
> > > > > @@ -66,5 +66,6 @@ DIRS-y += vhost
> > > > >  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen  DIRS-y += vmdq
> > > > > DIRS-y += vmdq_dcb
> > > > > +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> > > > >
> > > > >  include $(RTE_SDK)/mk/rte.extsubdir.mk diff --git
> > > > > a/examples/distributor_app/Makefile
> > > > > b/examples/distributor_app/Makefile
> > > > > new file mode 100644
> > > > > index 0000000..6a5bada
> > > > > --- /dev/null
> > > > > +++ b/examples/distributor_app/Makefile
> > > > > @@ -0,0 +1,57 @@
> > > > > +#   BSD LICENSE
> > > > > +#
> > > > > +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > > +#   All rights reserved.
> > > > > +#
> > > > > +#   Redistribution and use in source and binary forms, with or without
> > > > > +#   modification, are permitted provided that the following conditions
> > > > > +#   are met:
> > > > > +#
> > > > > +#     * Redistributions of source code must retain the above copyright
> > > > > +#       notice, this list of conditions and the following disclaimer.
> > > > > +#     * Redistributions in binary form must reproduce the above copyright
> > > > > +#       notice, this list of conditions and the following disclaimer in
> > > > > +#       the documentation and/or other materials provided with the
> > > > > +#       distribution.
> > > > > +#     * Neither the name of Intel Corporation nor the names of its
> > > > > +#       contributors may be used to endorse or promote products derived
> > > > > +#       from this software without specific prior written permission.
> > > > > +#
> > > > > +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > CONTRIBUTORS
> > > > > +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > NOT
> > > > > +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > FITNESS FOR
> > > > > +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > COPYRIGHT
> > > > > +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > INCIDENTAL,
> > > > > +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> > BUT NOT
> > > > > +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> > LOSS OF USE,
> > > > > +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > AND ON ANY
> > > > > +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > TORT
> > > > > +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
> > OF THE USE
> > > > > +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > DAMAGE.
> > > > > +
> > > > > +ifeq ($(RTE_SDK),)
> > > > > +$(error "Please define RTE_SDK environment variable") endif
> > > > > +
> > > > > +# Default target, can be overriden by command line or environment
> > > > > +RTE_TARGET ?= x86_64-native-linuxapp-gcc
> > > > > +
> > > > > +include $(RTE_SDK)/mk/rte.vars.mk
> > > > > +
> > > > > +# binary name
> > > > > +APP = distributor_app
> > > > > +
> > > > > +# all source are stored in SRCS-y SRCS-y := main.c
> > > > > +
> > > > > +CFLAGS += $(WERROR_FLAGS)
> > > > > +
> > > > > +# workaround for a gcc bug with noreturn attribute #
> > > > > +http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> > > > > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) CFLAGS_main.o +=
> > > > > +-Wno-return-type endif
> > > > > +
> > > > > +EXTRA_CFLAGS += -O3 -Wfatal-errors
> > > > > +
> > > > > +include $(RTE_SDK)/mk/rte.extapp.mk
> > > > > diff --git a/examples/distributor_app/main.c
> > > > > b/examples/distributor_app/main.c new file mode 100644 index
> > > > > 0000000..f555d93
> > > > > --- /dev/null
> > > > > +++ b/examples/distributor_app/main.c
> > > > > @@ -0,0 +1,600 @@
> > > > > +/*-
> > > > > + *   BSD LICENSE
> > > > > + *
> > > > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > > + *   All rights reserved.
> > > > > + *
> > > > > + *   Redistribution and use in source and binary forms, with or without
> > > > > + *   modification, are permitted provided that the following conditions
> > > > > + *   are met:
> > > > > + *
> > > > > + *     * Redistributions of source code must retain the above copyright
> > > > > + *       notice, this list of conditions and the following disclaimer.
> > > > > + *     * Redistributions in binary form must reproduce the above copyright
> > > > > + *       notice, this list of conditions and the following disclaimer in
> > > > > + *       the documentation and/or other materials provided with the
> > > > > + *       distribution.
> > > > > + *     * Neither the name of Intel Corporation nor the names of its
> > > > > + *       contributors may be used to endorse or promote products derived
> > > > > + *       from this software without specific prior written permission.
> > > > > + *
> > > > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > CONTRIBUTORS
> > > > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
> > BUT NOT
> > > > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > FITNESS FOR
> > > > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > COPYRIGHT
> > > > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > INCIDENTAL,
> > > > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> > BUT NOT
> > > > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> > LOSS OF USE,
> > > > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > AND ON ANY
> > > > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > TORT
> > > > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
> > OF THE USE
> > > > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > DAMAGE.
> > > > > + */
> > > > > +
> > > > > +#include <stdint.h>
> > > > > +#include <inttypes.h>
> > > > > +#include <unistd.h>
> > > > > +#include <signal.h>
> > > > > +#include <getopt.h>
> > > > > +
> > > > > +#include <rte_eal.h>
> > > > > +#include <rte_ethdev.h>
> > > > > +#include <rte_cycles.h>
> > > > > +#include <rte_malloc.h>
> > > > > +#include <rte_debug.h>
> > > > > +#include <rte_distributor.h>
> > > > > +
> > > > > +#include "main.h"
> > > > > +
> > > > > +#define RX_RING_SIZE 256
> > > > > +#define RX_FREE_THRESH 32
> > > > > +#define RX_PTHRESH 8
> > > > > +#define RX_HTHRESH 8
> > > > > +#define RX_WTHRESH 0
> > > > > +
> > > > > +#define TX_RING_SIZE 512
> > > > > +#define TX_FREE_THRESH 32
> > > > > +#define TX_PTHRESH 32
> > > > > +#define TX_HTHRESH 0
> > > > > +#define TX_WTHRESH 0
> > > > > +#define TX_RSBIT_THRESH 32
> > > > > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS |
> > ETH_TXQ_FLAGS_NOVLANOFFL |\
> > > > > +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
> > > > > +	ETH_TXQ_FLAGS_NOXSUMTCP)
> > > > > +
> > > > > +#define NUM_MBUFS ((64*1024)-1)
> > > > > +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) +
> > > > > +RTE_PKTMBUF_HEADROOM) #define MBUF_CACHE_SIZE 250 #define
> > > > > +BURST_SIZE 32 #define RTE_RING_SZ 1024
> > > > > +
> > > > > +/* uncommnet below line to enable debug logs */
> > > > > +/* #define DEBUG */
> > > > > +
> > > > > +#ifdef DEBUG
> > > > > +#define LOG_LEVEL RTE_LOG_DEBUG
> > > > > +#define LOG_DEBUG(log_type, fmt, args...) do {	\
> > > > > +	RTE_LOG(DEBUG, log_type, fmt, ##args)		\
> > > > > +} while (0)
> > > > > +#else
> > > > > +#define LOG_LEVEL RTE_LOG_INFO
> > > > > +#define LOG_DEBUG(log_type, fmt, args...) do {} while (0) #endif
> > > > > +
> > > > > +#define RTE_LOGTYPE_DISTRAPP RTE_LOGTYPE_USER1
> > > > > +
> > > > > +/* mask of enabled ports */
> > > > > +static uint32_t enabled_port_mask = 0;
> > > > > +
> > > > > +static volatile struct app_stats {
> > > > > +	struct {
> > > > > +		uint64_t rx_pkts;
> > > > > +		uint64_t returned_pkts;
> > > > > +		uint64_t enqueued_pkts;
> > > > > +	} rx __rte_cache_aligned;
> > > > > +
> > > > > +	struct {
> > > > > +		uint64_t dequeue_pkts;
> > > > > +		uint64_t tx_pkts;
> > > > > +	} tx __rte_cache_aligned;
> > > > > +} app_stats;
> > > > > +
> > > > > +static const struct rte_eth_conf port_conf_default = {
> > > > > +	.rxmode = {
> > > > > +		.mq_mode = ETH_MQ_RX_RSS,
> > > > > +		.max_rx_pkt_len = ETHER_MAX_LEN,
> > > > > +		.split_hdr_size = 0,
> > > > > +		.header_split   = 0, /**< Header Split disabled */
> > > > > +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> > > > > +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> > > > > +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> > > > > +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> > > > > +	},
> > > > > +	.txmode = {
> > > > > +		.mq_mode = ETH_MQ_TX_NONE,
> > > > > +	},
> > > > > +	.lpbk_mode = 0,
> > > > > +	.rx_adv_conf = {
> > > > > +			.rss_conf = {
> > > > > +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> > > > > +					ETH_RSS_IPV4_TCP |
> > ETH_RSS_IPV4_UDP |
> > > > > +					ETH_RSS_IPV6_TCP |
> > ETH_RSS_IPV6_UDP,
> > > > > +			}
> > > > > +	},
> > > > > +};
> > > > > +
> > > > > +static const struct rte_eth_rxconf rx_conf_default = {
> > > > > +	.rx_thresh = {
> > > > > +		.pthresh = RX_PTHRESH,
> > > > > +		.hthresh = RX_HTHRESH,
> > > > > +		.wthresh = RX_WTHRESH,
> > > > > +	},
> > > > > +	.rx_free_thresh = RX_FREE_THRESH,
> > > > > +	.rx_drop_en = 0,
> > > > > +};
> > > > > +
> > > > > +static const struct rte_eth_txconf tx_conf_default = {
> > > > > +	.tx_thresh = {
> > > > > +		.pthresh = TX_PTHRESH,
> > > > > +		.hthresh = TX_HTHRESH,
> > > > > +		.wthresh = TX_WTHRESH,
> > > > > +	},
> > > > > +	.tx_free_thresh = TX_FREE_THRESH,
> > > > > +	.tx_rs_thresh = TX_RSBIT_THRESH,
> > > > > +	.txq_flags = TX_Q_FLAGS
> > > > > +
> > > > > +};
> > > > > +
> > > > > +struct output_buffer {
> > > > > +	unsigned count;
> > > > > +	struct rte_mbuf *mbufs[BURST_SIZE]; };
> > > > > +
> > > > > +/*
> > > > > + * Initialises a given port using global settings and with the rx
> > > > > +buffers
> > > > > + * coming from the mbuf_pool passed as parameter  */ static
> > > > > +inline int port_init(uint8_t port, struct rte_mempool *mbuf_pool)
> > > > > +{
> > > > > +	struct rte_eth_conf port_conf = port_conf_default;
> > > > > +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> > > > > +	int retval;
> > > > > +	uint16_t q;
> > > > > +
> > > > > +	if (port >= rte_eth_dev_count())
> > > > > +		return -1;
> > > > > +
> > > > > +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> > > > > +	if (retval != 0)
> > > > > +		return retval;
> > > > > +
> > > > > +	for (q = 0; q < rxRings; q++) {
> > > > > +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> > > > > +						rte_eth_dev_socket_id(port),
> > > > > +						&rx_conf_default, mbuf_pool);
> > > > > +		if (retval < 0)
> > > > > +			return retval;
> > > > > +	}
> > > > > +
> > > > > +	for (q = 0; q < txRings; q++) {
> > > > > +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> > > > > +						rte_eth_dev_socket_id(port),
> > > > > +						&tx_conf_default);
> > > > > +		if (retval < 0)
> > > > > +			return retval;
> > > > > +	}
> > > > > +
> > > > > +	retval  = rte_eth_dev_start(port);
> > > > > +	if (retval < 0)
> > > > > +		return retval;
> > > > > +
> > > > > +	struct rte_eth_link link;
> > > > > +	rte_eth_link_get_nowait(port, &link);
> > > > > +	if (!link.link_status) {
> > > > > +		sleep(1);
> > > > > +		rte_eth_link_get_nowait(port, &link);
> > > > > +	}
> > > > > +
> > > > > +	if (!link.link_status) {
> > > > > +		printf("Link down on port %"PRIu8"\n", port);
> > > > > +		return 0;
> > > > > +	}
> > > > > +
> > > > > +	struct ether_addr addr;
> > > > > +	rte_eth_macaddr_get(port, &addr);
> > > > > +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> > > > > +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> > > > > +			(unsigned)port,
> > > > > +			addr.addr_bytes[0], addr.addr_bytes[1],
> > > > > +			addr.addr_bytes[2], addr.addr_bytes[3],
> > > > > +			addr.addr_bytes[4], addr.addr_bytes[5]);
> > > > > +
> > > > > +	rte_eth_promiscuous_enable(port);
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +struct lcore_params {
> > > > > +	unsigned worker_id;
> > > > > +	struct rte_distributor *d;
> > > > > +	struct rte_ring *r;
> > > > > +};
> > > > > +
> > > > > +static __attribute__((noreturn)) void lcore_rx(struct
> > > > > +lcore_params *p) {
> > > > > +	struct rte_distributor *d = p->d;
> > > > > +	struct rte_ring *r = p->r;
> > > > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > > > +	const int socket_id = rte_socket_id();
> > > > > +	uint8_t port;
> > > > > +
> > > > > +	for (port = 0; port < nb_ports; port++) {
> > > > > +		/* skip ports that are not enabled */
> > > > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > > > +			continue;
> > > > > +
> > > > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > > > +			printf("WARNING, port %u is on remote NUMA node to
> > "
> > > > > +					"RX thread.\n\tPerformance will not "
> > > > > +					"be optimal.\n", port);
> > > > > +	}
> > > > > +
> > > > > +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> > > > > +	port = 0;
> > > > > +	for (;;) {
> > > > > +		/* skip ports that are not enabled */
> > > > > +		if ((enabled_port_mask & (1 << port)) == 0) {
> > > > > +			if (++port == nb_ports)
> > > > > +				port = 0;
> > > > > +			continue;
> > > > > +		}
> > > > > +		struct rte_mbuf *bufs[BURST_SIZE*2];
> > > > > +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> > > > > +				BURST_SIZE);
> > > > > +		app_stats.rx.rx_pkts += nb_rx;
> > > > > +
> > > > > +		rte_distributor_process(d, bufs, nb_rx);
> > > > > +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> > > > > +				bufs, BURST_SIZE*2);
> > > > > +		app_stats.rx.returned_pkts += nb_ret;
> > > > > +		if (unlikely(nb_ret == 0))
> > > > > +			continue;
> > > > > +
> > > > > +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs, nb_ret);
> > > > > +		app_stats.rx.enqueued_pkts += sent;
> > > > > +		if (unlikely(sent < nb_ret)) {
> > > > > +			LOG_DEBUG(DISTRAPP, "%s:Packet loss due to full
> > ring\n", __func__);
> > > > > +			while (sent < nb_ret)
> > > > > +				rte_pktmbuf_free(bufs[sent++]);
> > > > > +		}
> > > > > +		if (++port == nb_ports)
> > > > > +			port = 0;
> > > > > +	}
> > > > > +}
> > > > > +
> > > > > +static inline void
> > > > > +flush_one_port(struct output_buffer *outbuf, uint8_t outp) {
> > > > > +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> > > > > +			outbuf->count);
> > > > > +	app_stats.tx.tx_pkts += nb_tx;
> > > > > +
> > > > > +	if (unlikely(nb_tx < outbuf->count)) {
> > > > > +		LOG_DEBUG(DISTRAPP, "%s:Packet loss with tx_burst\n",
> > __func__);
> > > > > +		do {
> > > > > +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> > > > > +		} while (++nb_tx < outbuf->count);
> > > > > +	}
> > > > > +	outbuf->count = 0;
> > > > > +}
> > > > > +
> > > > > +static inline void
> > > > > +flush_all_ports(struct output_buffer *tx_buffers, uint8_t
> > > > > +nb_ports) {
> > > > > +	uint8_t outp;
> > > > > +	for (outp = 0; outp < nb_ports; outp++) {
> > > > > +		/* skip ports that are not enabled */
> > > > > +		if ((enabled_port_mask & (1 << outp)) == 0)
> > > > > +			continue;
> > > > > +
> > > > > +		if (tx_buffers[outp].count == 0)
> > > > > +			continue;
> > > > > +
> > > > > +		flush_one_port(&tx_buffers[outp], outp);
> > > > > +	}
> > > > > +}
> > > > > +
> > > > > +static __attribute__((noreturn)) void lcore_tx(struct rte_ring
> > > > > +*in_r) {
> > > > > +	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
> > > > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > > > +	const int socket_id = rte_socket_id();
> > > > > +	uint8_t port;
> > > > > +
> > > > > +	for (port = 0; port < nb_ports; port++) {
> > > > > +		/* skip ports that are not enabled */
> > > > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > > > +			continue;
> > > > > +
> > > > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > > > +			printf("WARNING, port %u is on remote NUMA node to
> > "
> > > > > +					"TX thread.\n\tPerformance will not "
> > > > > +					"be optimal.\n", port);
> > > > > +	}
> > > > > +
> > > > > +	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
> > > > > +	for (;;) {
> > > > > +		for (port = 0; port < nb_ports; port++) {
> > > > > +			/* skip ports that are not enabled */
> > > > > +			if ((enabled_port_mask & (1 << port)) == 0)
> > > > > +				continue;
> > > > > +
> > > > > +			struct rte_mbuf *bufs[BURST_SIZE];
> > > > > +			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
> > > > > +					(void *)bufs, BURST_SIZE);
> > > > > +			app_stats.tx.dequeue_pkts += nb_rx;
> > > > > +
> > > > > +			/* if we get no traffic, flush anything we have */
> > > > > +			if (unlikely(nb_rx == 0)) {
> > > > > +				flush_all_ports(tx_buffers, nb_ports);
> > > > > +				continue;
> > > > > +			}
> > > > > +
> > > > > +			/* for traffic we receive, queue it up for transmit */
> > > > > +			uint16_t i;
> > > > > +			_mm_prefetch(bufs[0], 0);
> > > > > +			_mm_prefetch(bufs[1], 0);
> > > > > +			_mm_prefetch(bufs[2], 0);
> > > > > +			for (i = 0; i < nb_rx; i++) {
> > > > > +				struct output_buffer *outbuf;
> > > > > +				uint8_t outp;
> > > > > +				_mm_prefetch(bufs[i + 3], 0);
> > > > > +				/* workers should update in_port to hold the
> > > > > +				 * output port value */
> > > > > +				outp = bufs[i]->port;
> > > > > +				/* skip ports that are not enabled */
> > > > > +				if ((enabled_port_mask & (1 << outp)) == 0)
> > > > > +					continue;
> > > > > +
> > > > > +				outbuf = &tx_buffers[outp];
> > > > > +				outbuf->mbufs[outbuf->count++] = bufs[i];
> > > > > +				if (outbuf->count == BURST_SIZE)
> > > > > +					flush_one_port(outbuf, outp);
> > > > > +			}
> > > > > +		}
> > > > > +	}
> > > > > +}
> > > > > +
> > > > > +
> > > > > +static __attribute__((noreturn)) void lcore_worker(struct
> > > > > +lcore_params *p) {
> > > > > +	struct rte_distributor *d = p->d;
> > > > > +	const unsigned id = p->worker_id;
> > > > > +	/* for single port, xor_val will be zero so we won't modify the output
> > > > > +	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
> > > > > +	 */
> > > > > +	const unsigned xor_val = (rte_eth_dev_count() > 1);
> > > > > +	struct rte_mbuf *buf = NULL;
> > > > > +
> > > > > +	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
> > > > > +	for (;;) {
> > > > > +		buf = rte_distributor_get_pkt(d, id, buf);
> > > > > +		buf->port ^= xor_val;
> > > > > +	}
> > > > > +}
> > > > > +
> > > > > +static void
> > > > > +int_handler(int sig_num)
> > > > > +{
> > > > > +	struct rte_eth_stats eth_stats;
> > > > > +	unsigned i;
> > > > > +
> > > > > +	printf("Exiting on signal %d\n", sig_num);
> > > > > +
> > > > > +	printf("\nRX thread stats:\n");
> > > > > +	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
> > > > > +	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
> > > > > +	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
> > > > > +
> > > > > +	printf("\nTX thread stats:\n");
> > > > > +	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
> > > > > +	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
> > > > > +
> > > > > +	for (i = 0; i < rte_eth_dev_count(); i++) {
> > > > > +		rte_eth_stats_get(i, &eth_stats);
> > > > > +		printf("\nPort %u stats:\n", i);
> > > > > +		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
> > > > > +		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
> > > > > +		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
> > > > > +		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
> > > > > +		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
> > > > > +	}
> > > > > +	exit(0);
> > > > rte_exit here?  Also, this is a pretty ungraceful exit strategy as
> > > > all the threads you've created and memory you've allocated are just
> > forgotten here.
> > > > Given that dpdk mempools are shared, this has the potential to leak
> > > > lots of memory if other apps are using the dpdk at the same time
> > > > that you run this.  You probably want to use the sigint handler to
> > > > raise a flag to the tx/rx threads to shutdown gracefully, and then free your
> > allocated memory and mempool.
> > > >
> > > > Neil
> > > >
> > >
> > > Unless the different processes are explicitly cooperating as
> > > primary/secondary, the mempools are not shared. I just don't see the
> > > need for this app to do more cleanup on ctrl-c signal, as it's not
> > > intended to be a multiprocess app, and there is little that any
> > > secondary process could do to work with this app, except possibly some
> > > resource monitoring, which would be completely unaffected by it exiting the
> > way it does.
> > >
> > Ah, ok, so we don't use a common shared pool between isolated processes
> > then, thats good.  Still though, this is a sample application, I think its lazy
> > programming practice to illustrate to application developers that its generally ok
> > to exit programs without freeing your resources.  Its about 20 lines of additional
> > code to change the sigint handler to flag an exit condition, and have all the
> > other threads join on it.
> > 
> > Neil
> 
> 1)I had sent v5 patch which handles graceful shutdown of rx and tx threads upon SIGINT
I see it and will take a look shortly, thanks.

> 2)Worker thread graceful shutdown was not handled as of now as it needs some change in lcore_worker logic , which will be done in future enhancements.
Not sure I understand what you mean here.  Can you elaborate?

> 3)Freeing of mempool is also not handled , as the framework support is not available.
Ew, I hadn't noticed that, freeing of mempools seems like something we should
implement.

> 4)Cleaning of rx/tx queues not done, as it needs some extensive logic which we haven't planned as of now. Will check the possibility of doing it in future  enhancements    i.e in next version of sample application.
We can't just flush the queues after we shutdown the workers?  I presume a queue
flush operation exists, yes?
Neil

> 
> /Reshma
> 
> > 
> > > /Bruce
> > >
> 
> 
> --------------------------------------------------------------
> Intel Shannon Limited
> Registered in Ireland
> Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
> Registered Number: 308263
> Business address: Dromore House, East Park, Shannon, Co. Clare
> 
> This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
> 
> 
> 

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
  2014-10-01 14:56             ` Neil Horman
@ 2014-10-01 15:37               ` Bruce Richardson
  2014-10-01 16:07                 ` Neil Horman
  2014-10-02  9:04                 ` Ananyev, Konstantin
  0 siblings, 2 replies; 38+ messages in thread
From: Bruce Richardson @ 2014-10-01 15:37 UTC (permalink / raw)
  To: Neil Horman; +Cc: dev

On Wed, Oct 01, 2014 at 10:56:20AM -0400, Neil Horman wrote:
> On Wed, Oct 01, 2014 at 02:47:00PM +0000, Pattan, Reshma wrote:
> > 
> > 
> > > -----Original Message-----
> > > From: Neil Horman [mailto:nhorman@tuxdriver.com]
> > > Sent: Tuesday, September 30, 2014 2:40 PM
> > > To: Richardson, Bruce
> > > Cc: Pattan, Reshma; dev@dpdk.org
> > > Subject: Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
> > > 
> > > On Tue, Sep 30, 2014 at 01:18:28PM +0100, Bruce Richardson wrote:
> > > > On Tue, Sep 30, 2014 at 07:34:45AM -0400, Neil Horman wrote:
> > > > > On Tue, Sep 30, 2014 at 11:39:37AM +0100, reshmapa wrote:
> > > > > > From: Reshma Pattan <reshma.pattan@intel.com>
> > > > > >
> > > > > > A new sample app that shows the usage of the distributor library.
> > > > > > This app works as follows:
> > > > > >
> > > > > > * An RX thread runs which pulls packets from each ethernet port in turn
> > > > > >   and passes those packets to worker using a distributor component.
> > > > > > * The workers take the packets in turn, and determine the output port
> > > > > >   for those packets using basic l2forwarding doing an xor on the source
> > > > > >   port id.
> > > > > > * The RX thread takes the returned packets from the workers and enqueue
> > > > > >   those packets into an rte_ring structure.
> > > > > > * A TX thread pulls the packets off the rte_ring structure and then
> > > > > >   sends each packet out the output port specified previously by
> > > > > > the worker
> > > > > > * Command-line option support provided only for portmask.
> > > > > >
> > > > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > > > > > Signed-off-by: Reshma Pattan    <reshma.pattan@intel.com>
> > > > > > ---
> > > > > >  examples/Makefile                 |    1 +
> > > > > >  examples/distributor_app/Makefile |   57 ++++
> > > > > >  examples/distributor_app/main.c   |  600
> > > +++++++++++++++++++++++++++++++++++++
> > > > > >  examples/distributor_app/main.h   |   46 +++
> > > > > >  4 files changed, 704 insertions(+), 0 deletions(-)  create mode
> > > > > > 100644 examples/distributor_app/Makefile  create mode 100644
> > > > > > examples/distributor_app/main.c  create mode 100644
> > > > > > examples/distributor_app/main.h
> > > > > >
> > > > > > diff --git a/examples/Makefile b/examples/Makefile index
> > > > > > 6245f83..2ba82b0 100644
> > > > > > --- a/examples/Makefile
> > > > > > +++ b/examples/Makefile
> > > > > > @@ -66,5 +66,6 @@ DIRS-y += vhost
> > > > > >  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen  DIRS-y += vmdq
> > > > > > DIRS-y += vmdq_dcb
> > > > > > +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> > > > > >
> > > > > >  include $(RTE_SDK)/mk/rte.extsubdir.mk diff --git
> > > > > > a/examples/distributor_app/Makefile
> > > > > > b/examples/distributor_app/Makefile
> > > > > > new file mode 100644
> > > > > > index 0000000..6a5bada
> > > > > > --- /dev/null
> > > > > > +++ b/examples/distributor_app/Makefile
> > > > > > @@ -0,0 +1,57 @@
> > > > > > +#   BSD LICENSE
> > > > > > +#
> > > > > > +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > > > +#   All rights reserved.
> > > > > > +#
> > > > > > +#   Redistribution and use in source and binary forms, with or without
> > > > > > +#   modification, are permitted provided that the following conditions
> > > > > > +#   are met:
> > > > > > +#
> > > > > > +#     * Redistributions of source code must retain the above copyright
> > > > > > +#       notice, this list of conditions and the following disclaimer.
> > > > > > +#     * Redistributions in binary form must reproduce the above copyright
> > > > > > +#       notice, this list of conditions and the following disclaimer in
> > > > > > +#       the documentation and/or other materials provided with the
> > > > > > +#       distribution.
> > > > > > +#     * Neither the name of Intel Corporation nor the names of its
> > > > > > +#       contributors may be used to endorse or promote products derived
> > > > > > +#       from this software without specific prior written permission.
> > > > > > +#
> > > > > > +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > CONTRIBUTORS
> > > > > > +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > > NOT
> > > > > > +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > FITNESS FOR
> > > > > > +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > COPYRIGHT
> > > > > > +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > INCIDENTAL,
> > > > > > +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> > > BUT NOT
> > > > > > +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> > > LOSS OF USE,
> > > > > > +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > > AND ON ANY
> > > > > > +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > > TORT
> > > > > > +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
> > > OF THE USE
> > > > > > +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > DAMAGE.
> > > > > > +
> > > > > > +ifeq ($(RTE_SDK),)
> > > > > > +$(error "Please define RTE_SDK environment variable") endif
> > > > > > +
> > > > > > +# Default target, can be overriden by command line or environment
> > > > > > +RTE_TARGET ?= x86_64-native-linuxapp-gcc
> > > > > > +
> > > > > > +include $(RTE_SDK)/mk/rte.vars.mk
> > > > > > +
> > > > > > +# binary name
> > > > > > +APP = distributor_app
> > > > > > +
> > > > > > +# all source are stored in SRCS-y SRCS-y := main.c
> > > > > > +
> > > > > > +CFLAGS += $(WERROR_FLAGS)
> > > > > > +
> > > > > > +# workaround for a gcc bug with noreturn attribute #
> > > > > > +http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> > > > > > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) CFLAGS_main.o +=
> > > > > > +-Wno-return-type endif
> > > > > > +
> > > > > > +EXTRA_CFLAGS += -O3 -Wfatal-errors
> > > > > > +
> > > > > > +include $(RTE_SDK)/mk/rte.extapp.mk
> > > > > > diff --git a/examples/distributor_app/main.c
> > > > > > b/examples/distributor_app/main.c new file mode 100644 index
> > > > > > 0000000..f555d93
> > > > > > --- /dev/null
> > > > > > +++ b/examples/distributor_app/main.c
> > > > > > @@ -0,0 +1,600 @@
> > > > > > +/*-
> > > > > > + *   BSD LICENSE
> > > > > > + *
> > > > > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > > > + *   All rights reserved.
> > > > > > + *
> > > > > > + *   Redistribution and use in source and binary forms, with or without
> > > > > > + *   modification, are permitted provided that the following conditions
> > > > > > + *   are met:
> > > > > > + *
> > > > > > + *     * Redistributions of source code must retain the above copyright
> > > > > > + *       notice, this list of conditions and the following disclaimer.
> > > > > > + *     * Redistributions in binary form must reproduce the above copyright
> > > > > > + *       notice, this list of conditions and the following disclaimer in
> > > > > > + *       the documentation and/or other materials provided with the
> > > > > > + *       distribution.
> > > > > > + *     * Neither the name of Intel Corporation nor the names of its
> > > > > > + *       contributors may be used to endorse or promote products derived
> > > > > > + *       from this software without specific prior written permission.
> > > > > > + *
> > > > > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > CONTRIBUTORS
> > > > > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
> > > BUT NOT
> > > > > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > FITNESS FOR
> > > > > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > COPYRIGHT
> > > > > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > INCIDENTAL,
> > > > > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> > > BUT NOT
> > > > > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> > > LOSS OF USE,
> > > > > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > > AND ON ANY
> > > > > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > > TORT
> > > > > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
> > > OF THE USE
> > > > > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > DAMAGE.
> > > > > > + */
> > > > > > +
> > > > > > +#include <stdint.h>
> > > > > > +#include <inttypes.h>
> > > > > > +#include <unistd.h>
> > > > > > +#include <signal.h>
> > > > > > +#include <getopt.h>
> > > > > > +
> > > > > > +#include <rte_eal.h>
> > > > > > +#include <rte_ethdev.h>
> > > > > > +#include <rte_cycles.h>
> > > > > > +#include <rte_malloc.h>
> > > > > > +#include <rte_debug.h>
> > > > > > +#include <rte_distributor.h>
> > > > > > +
> > > > > > +#include "main.h"
> > > > > > +
> > > > > > +#define RX_RING_SIZE 256
> > > > > > +#define RX_FREE_THRESH 32
> > > > > > +#define RX_PTHRESH 8
> > > > > > +#define RX_HTHRESH 8
> > > > > > +#define RX_WTHRESH 0
> > > > > > +
> > > > > > +#define TX_RING_SIZE 512
> > > > > > +#define TX_FREE_THRESH 32
> > > > > > +#define TX_PTHRESH 32
> > > > > > +#define TX_HTHRESH 0
> > > > > > +#define TX_WTHRESH 0
> > > > > > +#define TX_RSBIT_THRESH 32
> > > > > > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS |
> > > ETH_TXQ_FLAGS_NOVLANOFFL |\
> > > > > > +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
> > > > > > +	ETH_TXQ_FLAGS_NOXSUMTCP)
> > > > > > +
> > > > > > +#define NUM_MBUFS ((64*1024)-1)
> > > > > > +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) +
> > > > > > +RTE_PKTMBUF_HEADROOM) #define MBUF_CACHE_SIZE 250 #define
> > > > > > +BURST_SIZE 32 #define RTE_RING_SZ 1024
> > > > > > +
> > > > > > +/* uncommnet below line to enable debug logs */
> > > > > > +/* #define DEBUG */
> > > > > > +
> > > > > > +#ifdef DEBUG
> > > > > > +#define LOG_LEVEL RTE_LOG_DEBUG
> > > > > > +#define LOG_DEBUG(log_type, fmt, args...) do {	\
> > > > > > +	RTE_LOG(DEBUG, log_type, fmt, ##args)		\
> > > > > > +} while (0)
> > > > > > +#else
> > > > > > +#define LOG_LEVEL RTE_LOG_INFO
> > > > > > +#define LOG_DEBUG(log_type, fmt, args...) do {} while (0) #endif
> > > > > > +
> > > > > > +#define RTE_LOGTYPE_DISTRAPP RTE_LOGTYPE_USER1
> > > > > > +
> > > > > > +/* mask of enabled ports */
> > > > > > +static uint32_t enabled_port_mask = 0;
> > > > > > +
> > > > > > +static volatile struct app_stats {
> > > > > > +	struct {
> > > > > > +		uint64_t rx_pkts;
> > > > > > +		uint64_t returned_pkts;
> > > > > > +		uint64_t enqueued_pkts;
> > > > > > +	} rx __rte_cache_aligned;
> > > > > > +
> > > > > > +	struct {
> > > > > > +		uint64_t dequeue_pkts;
> > > > > > +		uint64_t tx_pkts;
> > > > > > +	} tx __rte_cache_aligned;
> > > > > > +} app_stats;
> > > > > > +
> > > > > > +static const struct rte_eth_conf port_conf_default = {
> > > > > > +	.rxmode = {
> > > > > > +		.mq_mode = ETH_MQ_RX_RSS,
> > > > > > +		.max_rx_pkt_len = ETHER_MAX_LEN,
> > > > > > +		.split_hdr_size = 0,
> > > > > > +		.header_split   = 0, /**< Header Split disabled */
> > > > > > +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> > > > > > +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> > > > > > +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> > > > > > +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> > > > > > +	},
> > > > > > +	.txmode = {
> > > > > > +		.mq_mode = ETH_MQ_TX_NONE,
> > > > > > +	},
> > > > > > +	.lpbk_mode = 0,
> > > > > > +	.rx_adv_conf = {
> > > > > > +			.rss_conf = {
> > > > > > +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> > > > > > +					ETH_RSS_IPV4_TCP |
> > > ETH_RSS_IPV4_UDP |
> > > > > > +					ETH_RSS_IPV6_TCP |
> > > ETH_RSS_IPV6_UDP,
> > > > > > +			}
> > > > > > +	},
> > > > > > +};
> > > > > > +
> > > > > > +static const struct rte_eth_rxconf rx_conf_default = {
> > > > > > +	.rx_thresh = {
> > > > > > +		.pthresh = RX_PTHRESH,
> > > > > > +		.hthresh = RX_HTHRESH,
> > > > > > +		.wthresh = RX_WTHRESH,
> > > > > > +	},
> > > > > > +	.rx_free_thresh = RX_FREE_THRESH,
> > > > > > +	.rx_drop_en = 0,
> > > > > > +};
> > > > > > +
> > > > > > +static const struct rte_eth_txconf tx_conf_default = {
> > > > > > +	.tx_thresh = {
> > > > > > +		.pthresh = TX_PTHRESH,
> > > > > > +		.hthresh = TX_HTHRESH,
> > > > > > +		.wthresh = TX_WTHRESH,
> > > > > > +	},
> > > > > > +	.tx_free_thresh = TX_FREE_THRESH,
> > > > > > +	.tx_rs_thresh = TX_RSBIT_THRESH,
> > > > > > +	.txq_flags = TX_Q_FLAGS
> > > > > > +
> > > > > > +};
> > > > > > +
> > > > > > +struct output_buffer {
> > > > > > +	unsigned count;
> > > > > > +	struct rte_mbuf *mbufs[BURST_SIZE]; };
> > > > > > +
> > > > > > +/*
> > > > > > + * Initialises a given port using global settings and with the rx
> > > > > > +buffers
> > > > > > + * coming from the mbuf_pool passed as parameter  */ static
> > > > > > +inline int port_init(uint8_t port, struct rte_mempool *mbuf_pool)
> > > > > > +{
> > > > > > +	struct rte_eth_conf port_conf = port_conf_default;
> > > > > > +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> > > > > > +	int retval;
> > > > > > +	uint16_t q;
> > > > > > +
> > > > > > +	if (port >= rte_eth_dev_count())
> > > > > > +		return -1;
> > > > > > +
> > > > > > +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> > > > > > +	if (retval != 0)
> > > > > > +		return retval;
> > > > > > +
> > > > > > +	for (q = 0; q < rxRings; q++) {
> > > > > > +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> > > > > > +						rte_eth_dev_socket_id(port),
> > > > > > +						&rx_conf_default, mbuf_pool);
> > > > > > +		if (retval < 0)
> > > > > > +			return retval;
> > > > > > +	}
> > > > > > +
> > > > > > +	for (q = 0; q < txRings; q++) {
> > > > > > +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> > > > > > +						rte_eth_dev_socket_id(port),
> > > > > > +						&tx_conf_default);
> > > > > > +		if (retval < 0)
> > > > > > +			return retval;
> > > > > > +	}
> > > > > > +
> > > > > > +	retval  = rte_eth_dev_start(port);
> > > > > > +	if (retval < 0)
> > > > > > +		return retval;
> > > > > > +
> > > > > > +	struct rte_eth_link link;
> > > > > > +	rte_eth_link_get_nowait(port, &link);
> > > > > > +	if (!link.link_status) {
> > > > > > +		sleep(1);
> > > > > > +		rte_eth_link_get_nowait(port, &link);
> > > > > > +	}
> > > > > > +
> > > > > > +	if (!link.link_status) {
> > > > > > +		printf("Link down on port %"PRIu8"\n", port);
> > > > > > +		return 0;
> > > > > > +	}
> > > > > > +
> > > > > > +	struct ether_addr addr;
> > > > > > +	rte_eth_macaddr_get(port, &addr);
> > > > > > +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> > > > > > +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> > > > > > +			(unsigned)port,
> > > > > > +			addr.addr_bytes[0], addr.addr_bytes[1],
> > > > > > +			addr.addr_bytes[2], addr.addr_bytes[3],
> > > > > > +			addr.addr_bytes[4], addr.addr_bytes[5]);
> > > > > > +
> > > > > > +	rte_eth_promiscuous_enable(port);
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +struct lcore_params {
> > > > > > +	unsigned worker_id;
> > > > > > +	struct rte_distributor *d;
> > > > > > +	struct rte_ring *r;
> > > > > > +};
> > > > > > +
> > > > > > +static __attribute__((noreturn)) void lcore_rx(struct
> > > > > > +lcore_params *p) {
> > > > > > +	struct rte_distributor *d = p->d;
> > > > > > +	struct rte_ring *r = p->r;
> > > > > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > > > > +	const int socket_id = rte_socket_id();
> > > > > > +	uint8_t port;
> > > > > > +
> > > > > > +	for (port = 0; port < nb_ports; port++) {
> > > > > > +		/* skip ports that are not enabled */
> > > > > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > > > > +			continue;
> > > > > > +
> > > > > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > > > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > > > > +			printf("WARNING, port %u is on remote NUMA node to
> > > "
> > > > > > +					"RX thread.\n\tPerformance will not "
> > > > > > +					"be optimal.\n", port);
> > > > > > +	}
> > > > > > +
> > > > > > +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> > > > > > +	port = 0;
> > > > > > +	for (;;) {
> > > > > > +		/* skip ports that are not enabled */
> > > > > > +		if ((enabled_port_mask & (1 << port)) == 0) {
> > > > > > +			if (++port == nb_ports)
> > > > > > +				port = 0;
> > > > > > +			continue;
> > > > > > +		}
> > > > > > +		struct rte_mbuf *bufs[BURST_SIZE*2];
> > > > > > +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> > > > > > +				BURST_SIZE);
> > > > > > +		app_stats.rx.rx_pkts += nb_rx;
> > > > > > +
> > > > > > +		rte_distributor_process(d, bufs, nb_rx);
> > > > > > +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> > > > > > +				bufs, BURST_SIZE*2);
> > > > > > +		app_stats.rx.returned_pkts += nb_ret;
> > > > > > +		if (unlikely(nb_ret == 0))
> > > > > > +			continue;
> > > > > > +
> > > > > > +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs, nb_ret);
> > > > > > +		app_stats.rx.enqueued_pkts += sent;
> > > > > > +		if (unlikely(sent < nb_ret)) {
> > > > > > +			LOG_DEBUG(DISTRAPP, "%s:Packet loss due to full
> > > ring\n", __func__);
> > > > > > +			while (sent < nb_ret)
> > > > > > +				rte_pktmbuf_free(bufs[sent++]);
> > > > > > +		}
> > > > > > +		if (++port == nb_ports)
> > > > > > +			port = 0;
> > > > > > +	}
> > > > > > +}
> > > > > > +
> > > > > > +static inline void
> > > > > > +flush_one_port(struct output_buffer *outbuf, uint8_t outp) {
> > > > > > +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> > > > > > +			outbuf->count);
> > > > > > +	app_stats.tx.tx_pkts += nb_tx;
> > > > > > +
> > > > > > +	if (unlikely(nb_tx < outbuf->count)) {
> > > > > > +		LOG_DEBUG(DISTRAPP, "%s:Packet loss with tx_burst\n",
> > > __func__);
> > > > > > +		do {
> > > > > > +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> > > > > > +		} while (++nb_tx < outbuf->count);
> > > > > > +	}
> > > > > > +	outbuf->count = 0;
> > > > > > +}
> > > > > > +
> > > > > > +static inline void
> > > > > > +flush_all_ports(struct output_buffer *tx_buffers, uint8_t
> > > > > > +nb_ports) {
> > > > > > +	uint8_t outp;
> > > > > > +	for (outp = 0; outp < nb_ports; outp++) {
> > > > > > +		/* skip ports that are not enabled */
> > > > > > +		if ((enabled_port_mask & (1 << outp)) == 0)
> > > > > > +			continue;
> > > > > > +
> > > > > > +		if (tx_buffers[outp].count == 0)
> > > > > > +			continue;
> > > > > > +
> > > > > > +		flush_one_port(&tx_buffers[outp], outp);
> > > > > > +	}
> > > > > > +}
> > > > > > +
> > > > > > +static __attribute__((noreturn)) void lcore_tx(struct rte_ring
> > > > > > +*in_r) {
> > > > > > +	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
> > > > > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > > > > +	const int socket_id = rte_socket_id();
> > > > > > +	uint8_t port;
> > > > > > +
> > > > > > +	for (port = 0; port < nb_ports; port++) {
> > > > > > +		/* skip ports that are not enabled */
> > > > > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > > > > +			continue;
> > > > > > +
> > > > > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > > > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > > > > +			printf("WARNING, port %u is on remote NUMA node to
> > > "
> > > > > > +					"TX thread.\n\tPerformance will not "
> > > > > > +					"be optimal.\n", port);
> > > > > > +	}
> > > > > > +
> > > > > > +	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
> > > > > > +	for (;;) {
> > > > > > +		for (port = 0; port < nb_ports; port++) {
> > > > > > +			/* skip ports that are not enabled */
> > > > > > +			if ((enabled_port_mask & (1 << port)) == 0)
> > > > > > +				continue;
> > > > > > +
> > > > > > +			struct rte_mbuf *bufs[BURST_SIZE];
> > > > > > +			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
> > > > > > +					(void *)bufs, BURST_SIZE);
> > > > > > +			app_stats.tx.dequeue_pkts += nb_rx;
> > > > > > +
> > > > > > +			/* if we get no traffic, flush anything we have */
> > > > > > +			if (unlikely(nb_rx == 0)) {
> > > > > > +				flush_all_ports(tx_buffers, nb_ports);
> > > > > > +				continue;
> > > > > > +			}
> > > > > > +
> > > > > > +			/* for traffic we receive, queue it up for transmit */
> > > > > > +			uint16_t i;
> > > > > > +			_mm_prefetch(bufs[0], 0);
> > > > > > +			_mm_prefetch(bufs[1], 0);
> > > > > > +			_mm_prefetch(bufs[2], 0);
> > > > > > +			for (i = 0; i < nb_rx; i++) {
> > > > > > +				struct output_buffer *outbuf;
> > > > > > +				uint8_t outp;
> > > > > > +				_mm_prefetch(bufs[i + 3], 0);
> > > > > > +				/* workers should update in_port to hold the
> > > > > > +				 * output port value */
> > > > > > +				outp = bufs[i]->port;
> > > > > > +				/* skip ports that are not enabled */
> > > > > > +				if ((enabled_port_mask & (1 << outp)) == 0)
> > > > > > +					continue;
> > > > > > +
> > > > > > +				outbuf = &tx_buffers[outp];
> > > > > > +				outbuf->mbufs[outbuf->count++] = bufs[i];
> > > > > > +				if (outbuf->count == BURST_SIZE)
> > > > > > +					flush_one_port(outbuf, outp);
> > > > > > +			}
> > > > > > +		}
> > > > > > +	}
> > > > > > +}
> > > > > > +
> > > > > > +
> > > > > > +static __attribute__((noreturn)) void lcore_worker(struct
> > > > > > +lcore_params *p) {
> > > > > > +	struct rte_distributor *d = p->d;
> > > > > > +	const unsigned id = p->worker_id;
> > > > > > +	/* for single port, xor_val will be zero so we won't modify the output
> > > > > > +	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
> > > > > > +	 */
> > > > > > +	const unsigned xor_val = (rte_eth_dev_count() > 1);
> > > > > > +	struct rte_mbuf *buf = NULL;
> > > > > > +
> > > > > > +	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
> > > > > > +	for (;;) {
> > > > > > +		buf = rte_distributor_get_pkt(d, id, buf);
> > > > > > +		buf->port ^= xor_val;
> > > > > > +	}
> > > > > > +}
> > > > > > +
> > > > > > +static void
> > > > > > +int_handler(int sig_num)
> > > > > > +{
> > > > > > +	struct rte_eth_stats eth_stats;
> > > > > > +	unsigned i;
> > > > > > +
> > > > > > +	printf("Exiting on signal %d\n", sig_num);
> > > > > > +
> > > > > > +	printf("\nRX thread stats:\n");
> > > > > > +	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
> > > > > > +	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
> > > > > > +	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
> > > > > > +
> > > > > > +	printf("\nTX thread stats:\n");
> > > > > > +	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
> > > > > > +	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
> > > > > > +
> > > > > > +	for (i = 0; i < rte_eth_dev_count(); i++) {
> > > > > > +		rte_eth_stats_get(i, &eth_stats);
> > > > > > +		printf("\nPort %u stats:\n", i);
> > > > > > +		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
> > > > > > +		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
> > > > > > +		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
> > > > > > +		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
> > > > > > +		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
> > > > > > +	}
> > > > > > +	exit(0);
> > > > > rte_exit here?  Also, this is a pretty ungraceful exit strategy as
> > > > > all the threads you've created and memory you've allocated are just
> > > forgotten here.
> > > > > Given that dpdk mempools are shared, this has the potential to leak
> > > > > lots of memory if other apps are using the dpdk at the same time
> > > > > that you run this.  You probably want to use the sigint handler to
> > > > > raise a flag to the tx/rx threads to shutdown gracefully, and then free your
> > > allocated memory and mempool.
> > > > >
> > > > > Neil
> > > > >
> > > >
> > > > Unless the different processes are explicitly cooperating as
> > > > primary/secondary, the mempools are not shared. I just don't see the
> > > > need for this app to do more cleanup on ctrl-c signal, as it's not
> > > > intended to be a multiprocess app, and there is little that any
> > > > secondary process could do to work with this app, except possibly some
> > > > resource monitoring, which would be completely unaffected by it exiting the
> > > way it does.
> > > >
> > > Ah, ok, so we don't use a common shared pool between isolated processes
> > > then, thats good.  Still though, this is a sample application, I think its lazy
> > > programming practice to illustrate to application developers that its generally ok
> > > to exit programs without freeing your resources.  Its about 20 lines of additional
> > > code to change the sigint handler to flag an exit condition, and have all the
> > > other threads join on it.
> > > 
> > > Neil
> > 
> > 1)I had sent v5 patch which handles graceful shutdown of rx and tx threads upon SIGINT
> I see it and will take a look shortly, thanks.
> 
> > 2)Worker thread graceful shutdown was not handled as of now as it needs some change in lcore_worker logic , which will be done in future enhancements.
> Not sure I understand what you mean here.  Can you elaborate?
> 
> > 3)Freeing of mempool is also not handled , as the framework support is not available.
> Ew, I hadn't noticed that, freeing of mempools seems like something we should
> implement.
> 
> > 4)Cleaning of rx/tx queues not done, as it needs some extensive logic which we haven't planned as of now. Will check the possibility of doing it in future  enhancements    i.e in next version of sample application.
> We can't just flush the queues after we shutdown the workers?  I presume a queue
> flush operation exists, yes?
> Neil

Other than code hygiene, which does have some value in itself, I can't 
really see what the practical point of such cleanup would be. 

If traffic is going through the system, and the process is killed packets 
will be dropped, whatever we do, as packet reception will stop. If traffic 
is not going through the system, then there are no packets in flight and 
therefore no relevant cleanup to be done. [And if the traffic is stopped 
just before shutting down the app, at a throughput rate of a couple of 
million packets per second, the app should be flushed of packets within tiny 
fractions of a second].

So overall, I just don't see complicated jumping through hoops for flushing 
and cleaning up things being worth the effort. These apps are designed to 
run in a forever loop, and, in the exception case, when killed the cleanup 
done by kernel is sufficient.

regards,
/Bruce

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
  2014-10-01 15:37               ` Bruce Richardson
@ 2014-10-01 16:07                 ` Neil Horman
  2014-10-06 14:16                   ` Pattan, Reshma
  2014-10-02  9:04                 ` Ananyev, Konstantin
  1 sibling, 1 reply; 38+ messages in thread
From: Neil Horman @ 2014-10-01 16:07 UTC (permalink / raw)
  To: Bruce Richardson; +Cc: dev

> > > 
> > > 1)I had sent v5 patch which handles graceful shutdown of rx and tx threads upon SIGINT
> > I see it and will take a look shortly, thanks.
> > 
> > > 2)Worker thread graceful shutdown was not handled as of now as it needs some change in lcore_worker logic , which will be done in future enhancements.
> > Not sure I understand what you mean here.  Can you elaborate?
> > 
> > > 3)Freeing of mempool is also not handled , as the framework support is not available.
> > Ew, I hadn't noticed that, freeing of mempools seems like something we should
> > implement.
> > 
> > > 4)Cleaning of rx/tx queues not done, as it needs some extensive logic which we haven't planned as of now. Will check the possibility of doing it in future  enhancements    i.e in next version of sample application.
> > We can't just flush the queues after we shutdown the workers?  I presume a queue
> > flush operation exists, yes?
> > Neil
> 
> Other than code hygiene, which does have some value in itself, I can't 
> really see what the practical point of such cleanup would be. 
> 
This is really the only assertion I'm trying to make.  I understand this
application won't suffer from exiting uncleanly, and that makes the need for
preforming cleanup little more than overhead.

But that said, hygine is exactly the point I'm driving at here.  These are
example applications, that presumably people look at when writing their own
apps.  If you don't do things properly, people looking at your code are less
likely to do them as well.  Even if it doesn't hurt for you to exit uncleanly,
it will hurt someone, and if they look to these examples as a source of best
practices, it seems to me that it would be in everyones interest, if best
practices were demonstrated.

Neil

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
  2014-10-01 15:37               ` Bruce Richardson
  2014-10-01 16:07                 ` Neil Horman
@ 2014-10-02  9:04                 ` Ananyev, Konstantin
  1 sibling, 0 replies; 38+ messages in thread
From: Ananyev, Konstantin @ 2014-10-02  9:04 UTC (permalink / raw)
  To: Richardson, Bruce, Neil Horman; +Cc: dev



> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Bruce Richardson
> Sent: Wednesday, October 01, 2014 4:38 PM
> To: Neil Horman
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
> 
> On Wed, Oct 01, 2014 at 10:56:20AM -0400, Neil Horman wrote:
> > On Wed, Oct 01, 2014 at 02:47:00PM +0000, Pattan, Reshma wrote:
> > >
> > >
> > > > -----Original Message-----
> > > > From: Neil Horman [mailto:nhorman@tuxdriver.com]
> > > > Sent: Tuesday, September 30, 2014 2:40 PM
> > > > To: Richardson, Bruce
> > > > Cc: Pattan, Reshma; dev@dpdk.org
> > > > Subject: Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
> > > >
> > > > On Tue, Sep 30, 2014 at 01:18:28PM +0100, Bruce Richardson wrote:
> > > > > On Tue, Sep 30, 2014 at 07:34:45AM -0400, Neil Horman wrote:
> > > > > > On Tue, Sep 30, 2014 at 11:39:37AM +0100, reshmapa wrote:
> > > > > > > From: Reshma Pattan <reshma.pattan@intel.com>
> > > > > > >
> > > > > > > A new sample app that shows the usage of the distributor library.
> > > > > > > This app works as follows:
> > > > > > >
> > > > > > > * An RX thread runs which pulls packets from each ethernet port in turn
> > > > > > >   and passes those packets to worker using a distributor component.
> > > > > > > * The workers take the packets in turn, and determine the output port
> > > > > > >   for those packets using basic l2forwarding doing an xor on the source
> > > > > > >   port id.
> > > > > > > * The RX thread takes the returned packets from the workers and enqueue
> > > > > > >   those packets into an rte_ring structure.
> > > > > > > * A TX thread pulls the packets off the rte_ring structure and then
> > > > > > >   sends each packet out the output port specified previously by
> > > > > > > the worker
> > > > > > > * Command-line option support provided only for portmask.
> > > > > > >
> > > > > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > > > > > > Signed-off-by: Reshma Pattan    <reshma.pattan@intel.com>
> > > > > > > ---
> > > > > > >  examples/Makefile                 |    1 +
> > > > > > >  examples/distributor_app/Makefile |   57 ++++
> > > > > > >  examples/distributor_app/main.c   |  600
> > > > +++++++++++++++++++++++++++++++++++++
> > > > > > >  examples/distributor_app/main.h   |   46 +++
> > > > > > >  4 files changed, 704 insertions(+), 0 deletions(-)  create mode
> > > > > > > 100644 examples/distributor_app/Makefile  create mode 100644
> > > > > > > examples/distributor_app/main.c  create mode 100644
> > > > > > > examples/distributor_app/main.h
> > > > > > >
> > > > > > > diff --git a/examples/Makefile b/examples/Makefile index
> > > > > > > 6245f83..2ba82b0 100644
> > > > > > > --- a/examples/Makefile
> > > > > > > +++ b/examples/Makefile
> > > > > > > @@ -66,5 +66,6 @@ DIRS-y += vhost
> > > > > > >  DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen  DIRS-y += vmdq
> > > > > > > DIRS-y += vmdq_dcb
> > > > > > > +DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
> > > > > > >
> > > > > > >  include $(RTE_SDK)/mk/rte.extsubdir.mk diff --git
> > > > > > > a/examples/distributor_app/Makefile
> > > > > > > b/examples/distributor_app/Makefile
> > > > > > > new file mode 100644
> > > > > > > index 0000000..6a5bada
> > > > > > > --- /dev/null
> > > > > > > +++ b/examples/distributor_app/Makefile
> > > > > > > @@ -0,0 +1,57 @@
> > > > > > > +#   BSD LICENSE
> > > > > > > +#
> > > > > > > +#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > > > > +#   All rights reserved.
> > > > > > > +#
> > > > > > > +#   Redistribution and use in source and binary forms, with or without
> > > > > > > +#   modification, are permitted provided that the following conditions
> > > > > > > +#   are met:
> > > > > > > +#
> > > > > > > +#     * Redistributions of source code must retain the above copyright
> > > > > > > +#       notice, this list of conditions and the following disclaimer.
> > > > > > > +#     * Redistributions in binary form must reproduce the above copyright
> > > > > > > +#       notice, this list of conditions and the following disclaimer in
> > > > > > > +#       the documentation and/or other materials provided with the
> > > > > > > +#       distribution.
> > > > > > > +#     * Neither the name of Intel Corporation nor the names of its
> > > > > > > +#       contributors may be used to endorse or promote products derived
> > > > > > > +#       from this software without specific prior written permission.
> > > > > > > +#
> > > > > > > +#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > > CONTRIBUTORS
> > > > > > > +#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > > > NOT
> > > > > > > +#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > > FITNESS FOR
> > > > > > > +#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > > COPYRIGHT
> > > > > > > +#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > > INCIDENTAL,
> > > > > > > +#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> > > > BUT NOT
> > > > > > > +#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> > > > LOSS OF USE,
> > > > > > > +#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > > > AND ON ANY
> > > > > > > +#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > > > TORT
> > > > > > > +#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
> > > > OF THE USE
> > > > > > > +#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > > DAMAGE.
> > > > > > > +
> > > > > > > +ifeq ($(RTE_SDK),)
> > > > > > > +$(error "Please define RTE_SDK environment variable") endif
> > > > > > > +
> > > > > > > +# Default target, can be overriden by command line or environment
> > > > > > > +RTE_TARGET ?= x86_64-native-linuxapp-gcc
> > > > > > > +
> > > > > > > +include $(RTE_SDK)/mk/rte.vars.mk
> > > > > > > +
> > > > > > > +# binary name
> > > > > > > +APP = distributor_app
> > > > > > > +
> > > > > > > +# all source are stored in SRCS-y SRCS-y := main.c
> > > > > > > +
> > > > > > > +CFLAGS += $(WERROR_FLAGS)
> > > > > > > +
> > > > > > > +# workaround for a gcc bug with noreturn attribute #
> > > > > > > +http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> > > > > > > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) CFLAGS_main.o +=
> > > > > > > +-Wno-return-type endif
> > > > > > > +
> > > > > > > +EXTRA_CFLAGS += -O3 -Wfatal-errors
> > > > > > > +
> > > > > > > +include $(RTE_SDK)/mk/rte.extapp.mk
> > > > > > > diff --git a/examples/distributor_app/main.c
> > > > > > > b/examples/distributor_app/main.c new file mode 100644 index
> > > > > > > 0000000..f555d93
> > > > > > > --- /dev/null
> > > > > > > +++ b/examples/distributor_app/main.c
> > > > > > > @@ -0,0 +1,600 @@
> > > > > > > +/*-
> > > > > > > + *   BSD LICENSE
> > > > > > > + *
> > > > > > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > > > > + *   All rights reserved.
> > > > > > > + *
> > > > > > > + *   Redistribution and use in source and binary forms, with or without
> > > > > > > + *   modification, are permitted provided that the following conditions
> > > > > > > + *   are met:
> > > > > > > + *
> > > > > > > + *     * Redistributions of source code must retain the above copyright
> > > > > > > + *       notice, this list of conditions and the following disclaimer.
> > > > > > > + *     * Redistributions in binary form must reproduce the above copyright
> > > > > > > + *       notice, this list of conditions and the following disclaimer in
> > > > > > > + *       the documentation and/or other materials provided with the
> > > > > > > + *       distribution.
> > > > > > > + *     * Neither the name of Intel Corporation nor the names of its
> > > > > > > + *       contributors may be used to endorse or promote products derived
> > > > > > > + *       from this software without specific prior written permission.
> > > > > > > + *
> > > > > > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > > CONTRIBUTORS
> > > > > > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
> > > > BUT NOT
> > > > > > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > > FITNESS FOR
> > > > > > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > > COPYRIGHT
> > > > > > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > > INCIDENTAL,
> > > > > > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> > > > BUT NOT
> > > > > > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> > > > LOSS OF USE,
> > > > > > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> > > > AND ON ANY
> > > > > > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> > > > TORT
> > > > > > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
> > > > OF THE USE
> > > > > > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > > DAMAGE.
> > > > > > > + */
> > > > > > > +
> > > > > > > +#include <stdint.h>
> > > > > > > +#include <inttypes.h>
> > > > > > > +#include <unistd.h>
> > > > > > > +#include <signal.h>
> > > > > > > +#include <getopt.h>
> > > > > > > +
> > > > > > > +#include <rte_eal.h>
> > > > > > > +#include <rte_ethdev.h>
> > > > > > > +#include <rte_cycles.h>
> > > > > > > +#include <rte_malloc.h>
> > > > > > > +#include <rte_debug.h>
> > > > > > > +#include <rte_distributor.h>
> > > > > > > +
> > > > > > > +#include "main.h"
> > > > > > > +
> > > > > > > +#define RX_RING_SIZE 256
> > > > > > > +#define RX_FREE_THRESH 32
> > > > > > > +#define RX_PTHRESH 8
> > > > > > > +#define RX_HTHRESH 8
> > > > > > > +#define RX_WTHRESH 0
> > > > > > > +
> > > > > > > +#define TX_RING_SIZE 512
> > > > > > > +#define TX_FREE_THRESH 32
> > > > > > > +#define TX_PTHRESH 32
> > > > > > > +#define TX_HTHRESH 0
> > > > > > > +#define TX_WTHRESH 0
> > > > > > > +#define TX_RSBIT_THRESH 32
> > > > > > > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS |
> > > > ETH_TXQ_FLAGS_NOVLANOFFL |\
> > > > > > > +	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
> > > > > > > +	ETH_TXQ_FLAGS_NOXSUMTCP)
> > > > > > > +
> > > > > > > +#define NUM_MBUFS ((64*1024)-1)
> > > > > > > +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) +
> > > > > > > +RTE_PKTMBUF_HEADROOM) #define MBUF_CACHE_SIZE 250 #define
> > > > > > > +BURST_SIZE 32 #define RTE_RING_SZ 1024
> > > > > > > +
> > > > > > > +/* uncommnet below line to enable debug logs */
> > > > > > > +/* #define DEBUG */
> > > > > > > +
> > > > > > > +#ifdef DEBUG
> > > > > > > +#define LOG_LEVEL RTE_LOG_DEBUG
> > > > > > > +#define LOG_DEBUG(log_type, fmt, args...) do {	\
> > > > > > > +	RTE_LOG(DEBUG, log_type, fmt, ##args)		\
> > > > > > > +} while (0)
> > > > > > > +#else
> > > > > > > +#define LOG_LEVEL RTE_LOG_INFO
> > > > > > > +#define LOG_DEBUG(log_type, fmt, args...) do {} while (0) #endif
> > > > > > > +
> > > > > > > +#define RTE_LOGTYPE_DISTRAPP RTE_LOGTYPE_USER1
> > > > > > > +
> > > > > > > +/* mask of enabled ports */
> > > > > > > +static uint32_t enabled_port_mask = 0;
> > > > > > > +
> > > > > > > +static volatile struct app_stats {
> > > > > > > +	struct {
> > > > > > > +		uint64_t rx_pkts;
> > > > > > > +		uint64_t returned_pkts;
> > > > > > > +		uint64_t enqueued_pkts;
> > > > > > > +	} rx __rte_cache_aligned;
> > > > > > > +
> > > > > > > +	struct {
> > > > > > > +		uint64_t dequeue_pkts;
> > > > > > > +		uint64_t tx_pkts;
> > > > > > > +	} tx __rte_cache_aligned;
> > > > > > > +} app_stats;
> > > > > > > +
> > > > > > > +static const struct rte_eth_conf port_conf_default = {
> > > > > > > +	.rxmode = {
> > > > > > > +		.mq_mode = ETH_MQ_RX_RSS,
> > > > > > > +		.max_rx_pkt_len = ETHER_MAX_LEN,
> > > > > > > +		.split_hdr_size = 0,
> > > > > > > +		.header_split   = 0, /**< Header Split disabled */
> > > > > > > +		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
> > > > > > > +		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
> > > > > > > +		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
> > > > > > > +		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
> > > > > > > +	},
> > > > > > > +	.txmode = {
> > > > > > > +		.mq_mode = ETH_MQ_TX_NONE,
> > > > > > > +	},
> > > > > > > +	.lpbk_mode = 0,
> > > > > > > +	.rx_adv_conf = {
> > > > > > > +			.rss_conf = {
> > > > > > > +				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
> > > > > > > +					ETH_RSS_IPV4_TCP |
> > > > ETH_RSS_IPV4_UDP |
> > > > > > > +					ETH_RSS_IPV6_TCP |
> > > > ETH_RSS_IPV6_UDP,
> > > > > > > +			}
> > > > > > > +	},
> > > > > > > +};
> > > > > > > +
> > > > > > > +static const struct rte_eth_rxconf rx_conf_default = {
> > > > > > > +	.rx_thresh = {
> > > > > > > +		.pthresh = RX_PTHRESH,
> > > > > > > +		.hthresh = RX_HTHRESH,
> > > > > > > +		.wthresh = RX_WTHRESH,
> > > > > > > +	},
> > > > > > > +	.rx_free_thresh = RX_FREE_THRESH,
> > > > > > > +	.rx_drop_en = 0,
> > > > > > > +};
> > > > > > > +
> > > > > > > +static const struct rte_eth_txconf tx_conf_default = {
> > > > > > > +	.tx_thresh = {
> > > > > > > +		.pthresh = TX_PTHRESH,
> > > > > > > +		.hthresh = TX_HTHRESH,
> > > > > > > +		.wthresh = TX_WTHRESH,
> > > > > > > +	},
> > > > > > > +	.tx_free_thresh = TX_FREE_THRESH,
> > > > > > > +	.tx_rs_thresh = TX_RSBIT_THRESH,
> > > > > > > +	.txq_flags = TX_Q_FLAGS
> > > > > > > +
> > > > > > > +};
> > > > > > > +
> > > > > > > +struct output_buffer {
> > > > > > > +	unsigned count;
> > > > > > > +	struct rte_mbuf *mbufs[BURST_SIZE]; };
> > > > > > > +
> > > > > > > +/*
> > > > > > > + * Initialises a given port using global settings and with the rx
> > > > > > > +buffers
> > > > > > > + * coming from the mbuf_pool passed as parameter  */ static
> > > > > > > +inline int port_init(uint8_t port, struct rte_mempool *mbuf_pool)
> > > > > > > +{
> > > > > > > +	struct rte_eth_conf port_conf = port_conf_default;
> > > > > > > +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> > > > > > > +	int retval;
> > > > > > > +	uint16_t q;
> > > > > > > +
> > > > > > > +	if (port >= rte_eth_dev_count())
> > > > > > > +		return -1;
> > > > > > > +
> > > > > > > +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> > > > > > > +	if (retval != 0)
> > > > > > > +		return retval;
> > > > > > > +
> > > > > > > +	for (q = 0; q < rxRings; q++) {
> > > > > > > +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> > > > > > > +						rte_eth_dev_socket_id(port),
> > > > > > > +						&rx_conf_default, mbuf_pool);
> > > > > > > +		if (retval < 0)
> > > > > > > +			return retval;
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	for (q = 0; q < txRings; q++) {
> > > > > > > +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> > > > > > > +						rte_eth_dev_socket_id(port),
> > > > > > > +						&tx_conf_default);
> > > > > > > +		if (retval < 0)
> > > > > > > +			return retval;
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	retval  = rte_eth_dev_start(port);
> > > > > > > +	if (retval < 0)
> > > > > > > +		return retval;
> > > > > > > +
> > > > > > > +	struct rte_eth_link link;
> > > > > > > +	rte_eth_link_get_nowait(port, &link);
> > > > > > > +	if (!link.link_status) {
> > > > > > > +		sleep(1);
> > > > > > > +		rte_eth_link_get_nowait(port, &link);
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	if (!link.link_status) {
> > > > > > > +		printf("Link down on port %"PRIu8"\n", port);
> > > > > > > +		return 0;
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	struct ether_addr addr;
> > > > > > > +	rte_eth_macaddr_get(port, &addr);
> > > > > > > +	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
> > > > > > > +			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
> > > > > > > +			(unsigned)port,
> > > > > > > +			addr.addr_bytes[0], addr.addr_bytes[1],
> > > > > > > +			addr.addr_bytes[2], addr.addr_bytes[3],
> > > > > > > +			addr.addr_bytes[4], addr.addr_bytes[5]);
> > > > > > > +
> > > > > > > +	rte_eth_promiscuous_enable(port);
> > > > > > > +
> > > > > > > +	return 0;
> > > > > > > +}
> > > > > > > +
> > > > > > > +struct lcore_params {
> > > > > > > +	unsigned worker_id;
> > > > > > > +	struct rte_distributor *d;
> > > > > > > +	struct rte_ring *r;
> > > > > > > +};
> > > > > > > +
> > > > > > > +static __attribute__((noreturn)) void lcore_rx(struct
> > > > > > > +lcore_params *p) {
> > > > > > > +	struct rte_distributor *d = p->d;
> > > > > > > +	struct rte_ring *r = p->r;
> > > > > > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > > > > > +	const int socket_id = rte_socket_id();
> > > > > > > +	uint8_t port;
> > > > > > > +
> > > > > > > +	for (port = 0; port < nb_ports; port++) {
> > > > > > > +		/* skip ports that are not enabled */
> > > > > > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > > > > > +			continue;
> > > > > > > +
> > > > > > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > > > > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > > > > > +			printf("WARNING, port %u is on remote NUMA node to
> > > > "
> > > > > > > +					"RX thread.\n\tPerformance will not "
> > > > > > > +					"be optimal.\n", port);
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
> > > > > > > +	port = 0;
> > > > > > > +	for (;;) {
> > > > > > > +		/* skip ports that are not enabled */
> > > > > > > +		if ((enabled_port_mask & (1 << port)) == 0) {
> > > > > > > +			if (++port == nb_ports)
> > > > > > > +				port = 0;
> > > > > > > +			continue;
> > > > > > > +		}
> > > > > > > +		struct rte_mbuf *bufs[BURST_SIZE*2];
> > > > > > > +		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
> > > > > > > +				BURST_SIZE);
> > > > > > > +		app_stats.rx.rx_pkts += nb_rx;
> > > > > > > +
> > > > > > > +		rte_distributor_process(d, bufs, nb_rx);
> > > > > > > +		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
> > > > > > > +				bufs, BURST_SIZE*2);
> > > > > > > +		app_stats.rx.returned_pkts += nb_ret;
> > > > > > > +		if (unlikely(nb_ret == 0))
> > > > > > > +			continue;
> > > > > > > +
> > > > > > > +		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs, nb_ret);
> > > > > > > +		app_stats.rx.enqueued_pkts += sent;
> > > > > > > +		if (unlikely(sent < nb_ret)) {
> > > > > > > +			LOG_DEBUG(DISTRAPP, "%s:Packet loss due to full
> > > > ring\n", __func__);
> > > > > > > +			while (sent < nb_ret)
> > > > > > > +				rte_pktmbuf_free(bufs[sent++]);
> > > > > > > +		}
> > > > > > > +		if (++port == nb_ports)
> > > > > > > +			port = 0;
> > > > > > > +	}
> > > > > > > +}
> > > > > > > +
> > > > > > > +static inline void
> > > > > > > +flush_one_port(struct output_buffer *outbuf, uint8_t outp) {
> > > > > > > +	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
> > > > > > > +			outbuf->count);
> > > > > > > +	app_stats.tx.tx_pkts += nb_tx;
> > > > > > > +
> > > > > > > +	if (unlikely(nb_tx < outbuf->count)) {
> > > > > > > +		LOG_DEBUG(DISTRAPP, "%s:Packet loss with tx_burst\n",
> > > > __func__);
> > > > > > > +		do {
> > > > > > > +			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
> > > > > > > +		} while (++nb_tx < outbuf->count);
> > > > > > > +	}
> > > > > > > +	outbuf->count = 0;
> > > > > > > +}
> > > > > > > +
> > > > > > > +static inline void
> > > > > > > +flush_all_ports(struct output_buffer *tx_buffers, uint8_t
> > > > > > > +nb_ports) {
> > > > > > > +	uint8_t outp;
> > > > > > > +	for (outp = 0; outp < nb_ports; outp++) {
> > > > > > > +		/* skip ports that are not enabled */
> > > > > > > +		if ((enabled_port_mask & (1 << outp)) == 0)
> > > > > > > +			continue;
> > > > > > > +
> > > > > > > +		if (tx_buffers[outp].count == 0)
> > > > > > > +			continue;
> > > > > > > +
> > > > > > > +		flush_one_port(&tx_buffers[outp], outp);
> > > > > > > +	}
> > > > > > > +}
> > > > > > > +
> > > > > > > +static __attribute__((noreturn)) void lcore_tx(struct rte_ring
> > > > > > > +*in_r) {
> > > > > > > +	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
> > > > > > > +	const uint8_t nb_ports = rte_eth_dev_count();
> > > > > > > +	const int socket_id = rte_socket_id();
> > > > > > > +	uint8_t port;
> > > > > > > +
> > > > > > > +	for (port = 0; port < nb_ports; port++) {
> > > > > > > +		/* skip ports that are not enabled */
> > > > > > > +		if ((enabled_port_mask & (1 << port)) == 0)
> > > > > > > +			continue;
> > > > > > > +
> > > > > > > +		if (rte_eth_dev_socket_id(port) > 0 &&
> > > > > > > +				rte_eth_dev_socket_id(port) != socket_id)
> > > > > > > +			printf("WARNING, port %u is on remote NUMA node to
> > > > "
> > > > > > > +					"TX thread.\n\tPerformance will not "
> > > > > > > +					"be optimal.\n", port);
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
> > > > > > > +	for (;;) {
> > > > > > > +		for (port = 0; port < nb_ports; port++) {
> > > > > > > +			/* skip ports that are not enabled */
> > > > > > > +			if ((enabled_port_mask & (1 << port)) == 0)
> > > > > > > +				continue;
> > > > > > > +
> > > > > > > +			struct rte_mbuf *bufs[BURST_SIZE];
> > > > > > > +			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
> > > > > > > +					(void *)bufs, BURST_SIZE);
> > > > > > > +			app_stats.tx.dequeue_pkts += nb_rx;
> > > > > > > +
> > > > > > > +			/* if we get no traffic, flush anything we have */
> > > > > > > +			if (unlikely(nb_rx == 0)) {
> > > > > > > +				flush_all_ports(tx_buffers, nb_ports);
> > > > > > > +				continue;
> > > > > > > +			}
> > > > > > > +
> > > > > > > +			/* for traffic we receive, queue it up for transmit */
> > > > > > > +			uint16_t i;
> > > > > > > +			_mm_prefetch(bufs[0], 0);
> > > > > > > +			_mm_prefetch(bufs[1], 0);
> > > > > > > +			_mm_prefetch(bufs[2], 0);
> > > > > > > +			for (i = 0; i < nb_rx; i++) {
> > > > > > > +				struct output_buffer *outbuf;
> > > > > > > +				uint8_t outp;
> > > > > > > +				_mm_prefetch(bufs[i + 3], 0);
> > > > > > > +				/* workers should update in_port to hold the
> > > > > > > +				 * output port value */
> > > > > > > +				outp = bufs[i]->port;
> > > > > > > +				/* skip ports that are not enabled */
> > > > > > > +				if ((enabled_port_mask & (1 << outp)) == 0)
> > > > > > > +					continue;
> > > > > > > +
> > > > > > > +				outbuf = &tx_buffers[outp];
> > > > > > > +				outbuf->mbufs[outbuf->count++] = bufs[i];
> > > > > > > +				if (outbuf->count == BURST_SIZE)
> > > > > > > +					flush_one_port(outbuf, outp);
> > > > > > > +			}
> > > > > > > +		}
> > > > > > > +	}
> > > > > > > +}
> > > > > > > +
> > > > > > > +
> > > > > > > +static __attribute__((noreturn)) void lcore_worker(struct
> > > > > > > +lcore_params *p) {
> > > > > > > +	struct rte_distributor *d = p->d;
> > > > > > > +	const unsigned id = p->worker_id;
> > > > > > > +	/* for single port, xor_val will be zero so we won't modify the output
> > > > > > > +	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
> > > > > > > +	 */
> > > > > > > +	const unsigned xor_val = (rte_eth_dev_count() > 1);
> > > > > > > +	struct rte_mbuf *buf = NULL;
> > > > > > > +
> > > > > > > +	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
> > > > > > > +	for (;;) {
> > > > > > > +		buf = rte_distributor_get_pkt(d, id, buf);
> > > > > > > +		buf->port ^= xor_val;
> > > > > > > +	}
> > > > > > > +}
> > > > > > > +
> > > > > > > +static void
> > > > > > > +int_handler(int sig_num)
> > > > > > > +{
> > > > > > > +	struct rte_eth_stats eth_stats;
> > > > > > > +	unsigned i;
> > > > > > > +
> > > > > > > +	printf("Exiting on signal %d\n", sig_num);
> > > > > > > +
> > > > > > > +	printf("\nRX thread stats:\n");
> > > > > > > +	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
> > > > > > > +	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
> > > > > > > +	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
> > > > > > > +
> > > > > > > +	printf("\nTX thread stats:\n");
> > > > > > > +	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
> > > > > > > +	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
> > > > > > > +
> > > > > > > +	for (i = 0; i < rte_eth_dev_count(); i++) {
> > > > > > > +		rte_eth_stats_get(i, &eth_stats);
> > > > > > > +		printf("\nPort %u stats:\n", i);
> > > > > > > +		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
> > > > > > > +		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
> > > > > > > +		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
> > > > > > > +		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
> > > > > > > +		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
> > > > > > > +	}
> > > > > > > +	exit(0);
> > > > > > rte_exit here?  Also, this is a pretty ungraceful exit strategy as
> > > > > > all the threads you've created and memory you've allocated are just
> > > > forgotten here.
> > > > > > Given that dpdk mempools are shared, this has the potential to leak
> > > > > > lots of memory if other apps are using the dpdk at the same time
> > > > > > that you run this.  You probably want to use the sigint handler to
> > > > > > raise a flag to the tx/rx threads to shutdown gracefully, and then free your
> > > > allocated memory and mempool.
> > > > > >
> > > > > > Neil
> > > > > >
> > > > >
> > > > > Unless the different processes are explicitly cooperating as
> > > > > primary/secondary, the mempools are not shared. I just don't see the
> > > > > need for this app to do more cleanup on ctrl-c signal, as it's not
> > > > > intended to be a multiprocess app, and there is little that any
> > > > > secondary process could do to work with this app, except possibly some
> > > > > resource monitoring, which would be completely unaffected by it exiting the
> > > > way it does.
> > > > >
> > > > Ah, ok, so we don't use a common shared pool between isolated processes
> > > > then, thats good.  Still though, this is a sample application, I think its lazy
> > > > programming practice to illustrate to application developers that its generally ok
> > > > to exit programs without freeing your resources.  Its about 20 lines of additional
> > > > code to change the sigint handler to flag an exit condition, and have all the
> > > > other threads join on it.
> > > >
> > > > Neil
> > >
> > > 1)I had sent v5 patch which handles graceful shutdown of rx and tx threads upon SIGINT
> > I see it and will take a look shortly, thanks.
> >
> > > 2)Worker thread graceful shutdown was not handled as of now as it needs some change in lcore_worker logic , which will be done
> in future enhancements.
> > Not sure I understand what you mean here.  Can you elaborate?
> >
> > > 3)Freeing of mempool is also not handled , as the framework support is not available.
> > Ew, I hadn't noticed that, freeing of mempools seems like something we should
> > implement.
> >
> > > 4)Cleaning of rx/tx queues not done, as it needs some extensive logic which we haven't planned as of now. Will check the
> possibility of doing it in future  enhancements    i.e in next version of sample application.
> > We can't just flush the queues after we shutdown the workers?  I presume a queue
> > flush operation exists, yes?
> > Neil
> 
> Other than code hygiene, which does have some value in itself, I can't
> really see what the practical point of such cleanup would be.
> 
> If traffic is going through the system, and the process is killed packets
> will be dropped, whatever we do, as packet reception will stop. If traffic
> is not going through the system, then there are no packets in flight and
> therefore no relevant cleanup to be done. [And if the traffic is stopped
> just before shutting down the app, at a throughput rate of a couple of
> million packets per second, the app should be flushed of packets within tiny
> fractions of a second].

I think that in theory not resetting HW at process termination can cause a problem.
Something like that:
- DPDK app has HW RX/TX queues active with armed RXDs, but the link is idle (no packets are flying). 
- DPDK app terminates abnormally.
- user deletes DPDK hugepages files.
- Hugepage memory that was used by DPDK for RXDs/data buffers are given to other app (or kernel).
- Packet arrives -a s HW is still active - it will do a write to the RXD and data-buffer. 
- Silent memory corruption.

Saying that, I don't think we can completely eliminate that problem from user-space code -
as not process signals can be handled. 
>From other side - our whole concept is to move away from custom kernel modules...
Though we probably can make it less possible to happen - create a termination handler,
that  would try to reset all active HW.
And make sure it is called atexit and all catchable signals that cause process termination.
But I don' t think it is a good idea to duplicate such code in each and every sample app.
I think it should be in the librte_eal, and yes - it is a subject of a separate patch/discussion :)

Konstantin
 
> So overall, I just don't see complicated jumping through hoops for flushing
> and cleaning up things being worth the effort. These apps are designed to
> run in a forever loop, and, in the exception case, when killed the cleanup
> done by kernel is sufficient.
> 
> regards,
> /Bruce

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
  2014-10-01 16:07                 ` Neil Horman
@ 2014-10-06 14:16                   ` Pattan, Reshma
  2014-10-06 14:44                     ` Neil Horman
  0 siblings, 1 reply; 38+ messages in thread
From: Pattan, Reshma @ 2014-10-06 14:16 UTC (permalink / raw)
  To: Neil Horman; +Cc: dev



> -----Original Message-----
> From: Neil Horman [mailto:nhorman@tuxdriver.com]
> Sent: Wednesday, October 1, 2014 5:08 PM
> To: Richardson, Bruce
> Cc: Pattan, Reshma; dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
> 
> > > >
> > > > 1)I had sent v5 patch which handles graceful shutdown of rx and tx
> > > > threads upon SIGINT
> > > I see it and will take a look shortly, thanks.
> > >
> > > > 2)Worker thread graceful shutdown was not handled as of now as it needs
> some change in lcore_worker logic , which will be done in future enhancements.
> > > Not sure I understand what you mean here.  Can you elaborate?
> > >
rte_distributor_process which runs as part of rx thread will process incoming packets and checks for any requests for the packets from worker threads .
If request is seen, it adds the packet/work  to particular workers back log and proceed with processing of  next packet.
 If no request seen the packet index will not be incremented and the while loop which is conditionally based on packet indexing  runs in a continuous loop without breaking and rx thread will not proceed with next statement execution until unless rte_distributor_process  comes out of while loop. 
This issue happens only when we enable graceful shutdown logic for both rx/worker threads, as workers threads gets killed and no request seen by rx thread and it stucks. 
Hence as of now graceful shutdown logic is provided only for rx thread. For worker threads will check what can be done in next enhancements. 

Thanks,
Reshma

> > > > 3)Freeing of mempool is also not handled , as the framework support is not
> available.
> > > Ew, I hadn't noticed that, freeing of mempools seems like something
> > > we should implement.
> > >
> > > > 4)Cleaning of rx/tx queues not done, as it needs some extensive logic
> which we haven't planned as of now. Will check the possibility of doing it in
> future  enhancements    i.e in next version of sample application.
> > > We can't just flush the queues after we shutdown the workers?  I
> > > presume a queue flush operation exists, yes?
> > > Neil
> >
> > Other than code hygiene, which does have some value in itself, I can't
> > really see what the practical point of such cleanup would be.
> >
> This is really the only assertion I'm trying to make.  I understand this application
> won't suffer from exiting uncleanly, and that makes the need for preforming
> cleanup little more than overhead.
> 
> But that said, hygine is exactly the point I'm driving at here.  These are example
> applications, that presumably people look at when writing their own apps.  If
> you don't do things properly, people looking at your code are less likely to do
> them as well.  Even if it doesn't hurt for you to exit uncleanly, it will hurt
> someone, and if they look to these examples as a source of best practices, it
> seems to me that it would be in everyones interest, if best practices were
> demonstrated.
> 
> Neil

--------------------------------------------------------------
Intel Shannon Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263
Business address: Dromore House, East Park, Shannon, Co. Clare

This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
  2014-10-06 14:16                   ` Pattan, Reshma
@ 2014-10-06 14:44                     ` Neil Horman
  2014-10-06 17:34                       ` Pattan, Reshma
  0 siblings, 1 reply; 38+ messages in thread
From: Neil Horman @ 2014-10-06 14:44 UTC (permalink / raw)
  To: Pattan, Reshma; +Cc: dev

On Mon, Oct 06, 2014 at 02:16:22PM +0000, Pattan, Reshma wrote:
> 
> 
> > -----Original Message-----
> > From: Neil Horman [mailto:nhorman@tuxdriver.com]
> > Sent: Wednesday, October 1, 2014 5:08 PM
> > To: Richardson, Bruce
> > Cc: Pattan, Reshma; dev@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
> > 
> > > > >
> > > > > 1)I had sent v5 patch which handles graceful shutdown of rx and tx
> > > > > threads upon SIGINT
> > > > I see it and will take a look shortly, thanks.
> > > >
> > > > > 2)Worker thread graceful shutdown was not handled as of now as it needs
> > some change in lcore_worker logic , which will be done in future enhancements.
> > > > Not sure I understand what you mean here.  Can you elaborate?
> > > >
> rte_distributor_process which runs as part of rx thread will process incoming packets and checks for any requests for the packets from worker threads .
> If request is seen, it adds the packet/work  to particular workers back log and proceed with processing of  next packet.
>  If no request seen the packet index will not be incremented and the while loop which is conditionally based on packet indexing  runs in a continuous loop without breaking and rx thread will not proceed with next statement execution until unless rte_distributor_process  comes out of while loop. 
> This issue happens only when we enable graceful shutdown logic for both rx/worker threads, as workers threads gets killed and no request seen by rx thread and it stucks. 
> Hence as of now graceful shutdown logic is provided only for rx thread. For worker threads will check what can be done in next enhancements. 
> 
> Thanks,
> Reshma
> 

I see what you're saying, Once you make a call to rte_distributor_get_pkt, you
have no way to gracefully shut down use of the rte_distributor_library. Not just
this application, but any application.  Thats just not sane, and suggests that
we integrated the rte_distributor library too soon.  I would suggest that you
prefix this patch with an update to the rte distributor library to allow
rte_distributor_get_pkt and friends to return NULL if the queue is emtpy.
Applications should be checking the return value for NULL anyway, and can
preform the rte_pause operation.  Then update this patch to do a clean exit.  To
say that "we will check what can be done in the next enhancements" is to say
that this won't be addressed again until a paying custmoer gripes about it.
Neil

> > > > > 3)Freeing of mempool is also not handled , as the framework support is not
> > available.
> > > > Ew, I hadn't noticed that, freeing of mempools seems like something
> > > > we should implement.
> > > >
> > > > > 4)Cleaning of rx/tx queues not done, as it needs some extensive logic
> > which we haven't planned as of now. Will check the possibility of doing it in
> > future  enhancements    i.e in next version of sample application.
> > > > We can't just flush the queues after we shutdown the workers?  I
> > > > presume a queue flush operation exists, yes?
> > > > Neil
> > >
> > > Other than code hygiene, which does have some value in itself, I can't
> > > really see what the practical point of such cleanup would be.
> > >
> > This is really the only assertion I'm trying to make.  I understand this application
> > won't suffer from exiting uncleanly, and that makes the need for preforming
> > cleanup little more than overhead.
> > 
> > But that said, hygine is exactly the point I'm driving at here.  These are example
> > applications, that presumably people look at when writing their own apps.  If
> > you don't do things properly, people looking at your code are less likely to do
> > them as well.  Even if it doesn't hurt for you to exit uncleanly, it will hurt
> > someone, and if they look to these examples as a source of best practices, it
> > seems to me that it would be in everyones interest, if best practices were
> > demonstrated.
> > 
> > Neil
> 
> --------------------------------------------------------------
> Intel Shannon Limited
> Registered in Ireland
> Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
> Registered Number: 308263
> Business address: Dromore House, East Park, Shannon, Co. Clare
> 
> This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
> 
> 
> 

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
  2014-10-06 14:44                     ` Neil Horman
@ 2014-10-06 17:34                       ` Pattan, Reshma
  2014-10-06 19:02                         ` Neil Horman
  0 siblings, 1 reply; 38+ messages in thread
From: Pattan, Reshma @ 2014-10-06 17:34 UTC (permalink / raw)
  To: Neil Horman; +Cc: dev



> -----Original Message-----
> From: Neil Horman [mailto:nhorman@tuxdriver.com]
> Sent: Monday, October 6, 2014 3:45 PM
> To: Pattan, Reshma
> Cc: dev@dpdk.org; Richardson, Bruce
> Subject: Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
> 
> On Mon, Oct 06, 2014 at 02:16:22PM +0000, Pattan, Reshma wrote:
> >
> >
> > > -----Original Message-----
> > > From: Neil Horman [mailto:nhorman@tuxdriver.com]
> > > Sent: Wednesday, October 1, 2014 5:08 PM
> > > To: Richardson, Bruce
> > > Cc: Pattan, Reshma; dev@dpdk.org
> > > Subject: Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
> > >
> > > > > >
> > > > > > 1)I had sent v5 patch which handles graceful shutdown of rx
> > > > > > and tx threads upon SIGINT
> > > > > I see it and will take a look shortly, thanks.
> > > > >
> > > > > > 2)Worker thread graceful shutdown was not handled as of now as
> > > > > > it needs
> > > some change in lcore_worker logic , which will be done in future
> enhancements.
> > > > > Not sure I understand what you mean here.  Can you elaborate?
> > > > >
> > rte_distributor_process which runs as part of rx thread will process incoming
> packets and checks for any requests for the packets from worker threads .
> > If request is seen, it adds the packet/work  to particular workers back log and
> proceed with processing of  next packet.
> >  If no request seen the packet index will not be incremented and the while loop
> which is conditionally based on packet indexing  runs in a continuous loop
> without breaking and rx thread will not proceed with next statement execution
> until unless rte_distributor_process  comes out of while loop.
> > This issue happens only when we enable graceful shutdown logic for both
> rx/worker threads, as workers threads gets killed and no request seen by rx
> thread and it stucks.
> > Hence as of now graceful shutdown logic is provided only for rx thread. For
> worker threads will check what can be done in next enhancements.
> >
> > Thanks,
> > Reshma
> >
> 
> I see what you're saying, Once you make a call to rte_distributor_get_pkt, you
> have no way to gracefully shut down use of the rte_distributor_library. Not just
> this application, but any application.  Thats just not sane, and suggests that we
> integrated the rte_distributor library too soon.  I would suggest that you prefix
> this patch with an update to the rte distributor library to allow
> rte_distributor_get_pkt and friends to return NULL if the queue is emtpy.
> Applications should be checking the return value for NULL anyway, and can
> preform the rte_pause operation.  Then update this patch to do a clean exit.  To
> say that "we will check what can be done in the next enhancements" is to say
> that this won't be addressed again until a paying custmoer gripes about it.
> Neil
> 

Hi Neil,

We have rte_distributor_request_pkt and rte_distributor_poll_pkt() in dpdk.org,  which can be used together(in place of  rte_distributor_get_pkt)
 to check empty queue condition I believe. So no separate changes needed.
Though we replace to rte_distributor_get_pkt with above two, the issue will not be solved as the thread that gets blocked is rx thread but not worker thread.
Rx thread gets blocked in rte_distributore_process due to non-availability of requests from worker. 
 How about sending dummy request_pkts upon SIGINT and allow rte_distributore_process to get to completion? 

Thanks,
Reshma

> > > > > > 3)Freeing of mempool is also not handled , as the framework
> > > > > > support is not
> > > available.
> > > > > Ew, I hadn't noticed that, freeing of mempools seems like
> > > > > something we should implement.
> > > > >
> > > > > > 4)Cleaning of rx/tx queues not done, as it needs some
> > > > > > extensive logic
> > > which we haven't planned as of now. Will check the possibility of doing it in
> > > future  enhancements    i.e in next version of sample application.
> > > > > We can't just flush the queues after we shutdown the workers?  I
> > > > > presume a queue flush operation exists, yes?
> > > > > Neil
> > > >
> > > > Other than code hygiene, which does have some value in itself, I
> > > > can't really see what the practical point of such cleanup would be.
> > > >
> > > This is really the only assertion I'm trying to make.  I understand
> > > this application won't suffer from exiting uncleanly, and that makes
> > > the need for preforming cleanup little more than overhead.
> > >
> > > But that said, hygine is exactly the point I'm driving at here.
> > > These are example applications, that presumably people look at when
> > > writing their own apps.  If you don't do things properly, people
> > > looking at your code are less likely to do them as well.  Even if it
> > > doesn't hurt for you to exit uncleanly, it will hurt someone, and if
> > > they look to these examples as a source of best practices, it seems
> > > to me that it would be in everyones interest, if best practices were
> demonstrated.
> > >
> > > Neil
> >
> > --------------------------------------------------------------
> > Intel Shannon Limited
> > Registered in Ireland
> > Registered Office: Collinstown Industrial Park, Leixlip, County
> > Kildare Registered Number: 308263 Business address: Dromore House,
> > East Park, Shannon, Co. Clare
> >
> > This e-mail and any attachments may contain confidential material for the sole
> use of the intended recipient(s). Any review or distribution by others is strictly
> prohibited. If you are not the intended recipient, please contact the sender and
> delete all copies.
> >
> >
> >
--------------------------------------------------------------
Intel Shannon Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263
Business address: Dromore House, East Park, Shannon, Co. Clare

This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
  2014-10-06 17:34                       ` Pattan, Reshma
@ 2014-10-06 19:02                         ` Neil Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Neil Horman @ 2014-10-06 19:02 UTC (permalink / raw)
  To: Pattan, Reshma; +Cc: dev

On Mon, Oct 06, 2014 at 05:34:13PM +0000, Pattan, Reshma wrote:
> 
> 
> > -----Original Message-----
> > From: Neil Horman [mailto:nhorman@tuxdriver.com]
> > Sent: Monday, October 6, 2014 3:45 PM
> > To: Pattan, Reshma
> > Cc: dev@dpdk.org; Richardson, Bruce
> > Subject: Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
> > 
> > On Mon, Oct 06, 2014 at 02:16:22PM +0000, Pattan, Reshma wrote:
> > >
> > >
> > > > -----Original Message-----
> > > > From: Neil Horman [mailto:nhorman@tuxdriver.com]
> > > > Sent: Wednesday, October 1, 2014 5:08 PM
> > > > To: Richardson, Bruce
> > > > Cc: Pattan, Reshma; dev@dpdk.org
> > > > Subject: Re: [dpdk-dev] [PATCH v3] distributor_app: new sample app
> > > >
> > > > > > >
> > > > > > > 1)I had sent v5 patch which handles graceful shutdown of rx
> > > > > > > and tx threads upon SIGINT
> > > > > > I see it and will take a look shortly, thanks.
> > > > > >
> > > > > > > 2)Worker thread graceful shutdown was not handled as of now as
> > > > > > > it needs
> > > > some change in lcore_worker logic , which will be done in future
> > enhancements.
> > > > > > Not sure I understand what you mean here.  Can you elaborate?
> > > > > >
> > > rte_distributor_process which runs as part of rx thread will process incoming
> > packets and checks for any requests for the packets from worker threads .
> > > If request is seen, it adds the packet/work  to particular workers back log and
> > proceed with processing of  next packet.
> > >  If no request seen the packet index will not be incremented and the while loop
> > which is conditionally based on packet indexing  runs in a continuous loop
> > without breaking and rx thread will not proceed with next statement execution
> > until unless rte_distributor_process  comes out of while loop.
> > > This issue happens only when we enable graceful shutdown logic for both
> > rx/worker threads, as workers threads gets killed and no request seen by rx
> > thread and it stucks.
> > > Hence as of now graceful shutdown logic is provided only for rx thread. For
> > worker threads will check what can be done in next enhancements.
> > >
> > > Thanks,
> > > Reshma
> > >
> > 
> > I see what you're saying, Once you make a call to rte_distributor_get_pkt, you
> > have no way to gracefully shut down use of the rte_distributor_library. Not just
> > this application, but any application.  Thats just not sane, and suggests that we
> > integrated the rte_distributor library too soon.  I would suggest that you prefix
> > this patch with an update to the rte distributor library to allow
> > rte_distributor_get_pkt and friends to return NULL if the queue is emtpy.
> > Applications should be checking the return value for NULL anyway, and can
> > preform the rte_pause operation.  Then update this patch to do a clean exit.  To
> > say that "we will check what can be done in the next enhancements" is to say
> > that this won't be addressed again until a paying custmoer gripes about it.
> > Neil
> > 
> 
> Hi Neil,
> 
> We have rte_distributor_request_pkt and rte_distributor_poll_pkt() in dpdk.org,  which can be used together(in place of  rte_distributor_get_pkt)
>  to check empty queue condition I believe. So no separate changes needed.
> Though we replace to rte_distributor_get_pkt with above two, the issue will not be solved as the thread that gets blocked is rx thread but not worker thread.
> Rx thread gets blocked in rte_distributore_process due to non-availability of requests from worker. 
>  How about sending dummy request_pkts upon SIGINT and allow rte_distributore_process to get to completion? 
> 
I suppose creating a flagged dummy packet to ensure that the worker threads can
exit their spin loops works fine, yes.

Neil

> Thanks,
> Reshma
> 
> > > > > > > 3)Freeing of mempool is also not handled , as the framework
> > > > > > > support is not
> > > > available.
> > > > > > Ew, I hadn't noticed that, freeing of mempools seems like
> > > > > > something we should implement.
> > > > > >
> > > > > > > 4)Cleaning of rx/tx queues not done, as it needs some
> > > > > > > extensive logic
> > > > which we haven't planned as of now. Will check the possibility of doing it in
> > > > future  enhancements    i.e in next version of sample application.
> > > > > > We can't just flush the queues after we shutdown the workers?  I
> > > > > > presume a queue flush operation exists, yes?
> > > > > > Neil
> > > > >
> > > > > Other than code hygiene, which does have some value in itself, I
> > > > > can't really see what the practical point of such cleanup would be.
> > > > >
> > > > This is really the only assertion I'm trying to make.  I understand
> > > > this application won't suffer from exiting uncleanly, and that makes
> > > > the need for preforming cleanup little more than overhead.
> > > >
> > > > But that said, hygine is exactly the point I'm driving at here.
> > > > These are example applications, that presumably people look at when
> > > > writing their own apps.  If you don't do things properly, people
> > > > looking at your code are less likely to do them as well.  Even if it
> > > > doesn't hurt for you to exit uncleanly, it will hurt someone, and if
> > > > they look to these examples as a source of best practices, it seems
> > > > to me that it would be in everyones interest, if best practices were
> > demonstrated.
> > > >
> > > > Neil
> > >
> > > --------------------------------------------------------------
> > > Intel Shannon Limited
> > > Registered in Ireland
> > > Registered Office: Collinstown Industrial Park, Leixlip, County
> > > Kildare Registered Number: 308263 Business address: Dromore House,
> > > East Park, Shannon, Co. Clare
> > >
> > > This e-mail and any attachments may contain confidential material for the sole
> > use of the intended recipient(s). Any review or distribution by others is strictly
> > prohibited. If you are not the intended recipient, please contact the sender and
> > delete all copies.
> > >
> > >
> > >
> --------------------------------------------------------------
> Intel Shannon Limited
> Registered in Ireland
> Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
> Registered Number: 308263
> Business address: Dromore House, East Park, Shannon, Co. Clare
> 
> This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
> 
> 
> 

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [dpdk-dev] [PATCH v6] distributor_app: new sample app
  2014-10-01 14:33       ` [dpdk-dev] [PATCH v5] distributor_app: new sample app reshmapa
@ 2014-10-17 13:59         ` Reshma Pattan
  2014-11-02 20:08           ` De Lara Guarch, Pablo
  2014-11-03 15:49           ` [dpdk-dev] [PATCH v7] " Reshma Pattan
  0 siblings, 2 replies; 38+ messages in thread
From: Reshma Pattan @ 2014-10-17 13:59 UTC (permalink / raw)
  To: dev

A new sample app that shows the usage of the distributor library. This
app works as follows:


* An RX thread runs which pulls packets from each ethernet port in turn
  and passes those packets to worker using a distributor component.
* The workers take the packets in turn, and determine the output port
  for those packets using basic l2forwarding doing an xor on the source
  port id.
* The RX thread takes the returned packets from the workers and enqueue
  those packets into an rte_ring structure.
* A TX thread pulls the packets off the rte_ring structure and then
  sends each packet out the output port specified previously by the worker
* Command-line option support provided only for portmask.

v5 change:
* Handled gracefull shutdown of rx and tx threads upon SIGINT.

v6 change:
* modified graceful shutdown logic to handle all threads upon SIGINT
* removed call to rte_eal_pci_probe()
* added seperate print_stats function

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
---
 examples/Makefile                 |    1 +
 examples/distributor_app/Makefile |   57 ++++
 examples/distributor_app/main.c   |  642 +++++++++++++++++++++++++++++++++++++
 examples/distributor_app/main.h   |   46 +++
 4 files changed, 746 insertions(+), 0 deletions(-)
 create mode 100644 examples/distributor_app/Makefile
 create mode 100644 examples/distributor_app/main.c
 create mode 100644 examples/distributor_app/main.h

diff --git a/examples/Makefile b/examples/Makefile
index 6245f83..2ba82b0 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -66,5 +66,6 @@ DIRS-y += vhost
 DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
 DIRS-y += vmdq
 DIRS-y += vmdq_dcb
+DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
 
 include $(RTE_SDK)/mk/rte.extsubdir.mk
diff --git a/examples/distributor_app/Makefile b/examples/distributor_app/Makefile
new file mode 100644
index 0000000..6a5bada
--- /dev/null
+++ b/examples/distributor_app/Makefile
@@ -0,0 +1,57 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = distributor_app
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+EXTRA_CFLAGS += -O3 -Wfatal-errors
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/distributor_app/main.c b/examples/distributor_app/main.c
new file mode 100644
index 0000000..c9994a6
--- /dev/null
+++ b/examples/distributor_app/main.c
@@ -0,0 +1,642 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <signal.h>
+#include <getopt.h>
+
+#include <rte_eal.h>
+#include <rte_ethdev.h>
+#include <rte_cycles.h>
+#include <rte_malloc.h>
+#include <rte_debug.h>
+#include <rte_distributor.h>
+
+#include "main.h"
+
+#define RX_RING_SIZE 256
+#define RX_FREE_THRESH 32
+#define RX_PTHRESH 8
+#define RX_HTHRESH 8
+#define RX_WTHRESH 0
+
+#define TX_RING_SIZE 512
+#define TX_FREE_THRESH 32
+#define TX_PTHRESH 32
+#define TX_HTHRESH 0
+#define TX_WTHRESH 0
+#define TX_RSBIT_THRESH 32
+#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\
+	ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
+	ETH_TXQ_FLAGS_NOXSUMTCP)
+
+#define NUM_MBUFS ((64*1024)-1)
+#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_CACHE_SIZE 250
+#define BURST_SIZE 32
+#define RTE_RING_SZ 1024
+
+/* uncommnet below line to enable debug logs */
+/* #define DEBUG */
+
+#ifdef DEBUG
+#define LOG_LEVEL RTE_LOG_DEBUG
+#define LOG_DEBUG(log_type, fmt, args...) do {	\
+	RTE_LOG(DEBUG, log_type, fmt, ##args)		\
+} while (0)
+#else
+#define LOG_LEVEL RTE_LOG_INFO
+#define LOG_DEBUG(log_type, fmt, args...) do {} while (0)
+#endif
+
+#define RTE_LOGTYPE_DISTRAPP RTE_LOGTYPE_USER1
+
+/* mask of enabled ports */
+static uint32_t enabled_port_mask;
+volatile uint8_t quit_signal;
+volatile uint8_t quit_signal_rx;
+
+static volatile struct app_stats {
+	struct {
+		uint64_t rx_pkts;
+		uint64_t returned_pkts;
+		uint64_t enqueued_pkts;
+	} rx __rte_cache_aligned;
+
+	struct {
+		uint64_t dequeue_pkts;
+		uint64_t tx_pkts;
+	} tx __rte_cache_aligned;
+} app_stats;
+
+static const struct rte_eth_conf port_conf_default = {
+	.rxmode = {
+		.mq_mode = ETH_MQ_RX_RSS,
+		.max_rx_pkt_len = ETHER_MAX_LEN,
+		.split_hdr_size = 0,
+		.header_split   = 0, /**< Header Split disabled */
+		.hw_ip_checksum = 0, /**< IP checksum offload enabled */
+		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
+		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
+		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
+	},
+	.txmode = {
+		.mq_mode = ETH_MQ_TX_NONE,
+	},
+	.lpbk_mode = 0,
+	.rx_adv_conf = {
+			.rss_conf = {
+				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
+					ETH_RSS_IPV4_TCP | ETH_RSS_IPV4_UDP |
+					ETH_RSS_IPV6_TCP | ETH_RSS_IPV6_UDP,
+			}
+	},
+};
+
+static const struct rte_eth_rxconf rx_conf_default = {
+	.rx_thresh = {
+		.pthresh = RX_PTHRESH,
+		.hthresh = RX_HTHRESH,
+		.wthresh = RX_WTHRESH,
+	},
+	.rx_free_thresh = RX_FREE_THRESH,
+	.rx_drop_en = 0,
+};
+
+static const struct rte_eth_txconf tx_conf_default = {
+	.tx_thresh = {
+		.pthresh = TX_PTHRESH,
+		.hthresh = TX_HTHRESH,
+		.wthresh = TX_WTHRESH,
+	},
+	.tx_free_thresh = TX_FREE_THRESH,
+	.tx_rs_thresh = TX_RSBIT_THRESH,
+	.txq_flags = TX_Q_FLAGS
+
+};
+
+struct output_buffer {
+	unsigned count;
+	struct rte_mbuf *mbufs[BURST_SIZE];
+};
+
+/*
+ * Initialises a given port using global settings and with the rx buffers
+ * coming from the mbuf_pool passed as parameter
+ */
+static inline int
+port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+{
+	struct rte_eth_conf port_conf = port_conf_default;
+	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
+	int retval;
+	uint16_t q;
+
+	if (port >= rte_eth_dev_count())
+		return -1;
+
+	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
+	if (retval != 0)
+		return retval;
+
+	for (q = 0; q < rxRings; q++) {
+		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
+						rte_eth_dev_socket_id(port),
+						&rx_conf_default, mbuf_pool);
+		if (retval < 0)
+			return retval;
+	}
+
+	for (q = 0; q < txRings; q++) {
+		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
+						rte_eth_dev_socket_id(port),
+						&tx_conf_default);
+		if (retval < 0)
+			return retval;
+	}
+
+	retval  = rte_eth_dev_start(port);
+	if (retval < 0)
+		return retval;
+
+	struct rte_eth_link link;
+	rte_eth_link_get_nowait(port, &link);
+	if (!link.link_status) {
+		sleep(1);
+		rte_eth_link_get_nowait(port, &link);
+	}
+
+	if (!link.link_status) {
+		printf("Link down on port %"PRIu8"\n", port);
+		return 0;
+	}
+
+	struct ether_addr addr;
+	rte_eth_macaddr_get(port, &addr);
+	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
+			(unsigned)port,
+			addr.addr_bytes[0], addr.addr_bytes[1],
+			addr.addr_bytes[2], addr.addr_bytes[3],
+			addr.addr_bytes[4], addr.addr_bytes[5]);
+
+	rte_eth_promiscuous_enable(port);
+
+	return 0;
+}
+
+struct lcore_params {
+	unsigned worker_id;
+	struct rte_distributor *d;
+	struct rte_ring *r;
+	struct rte_mempool *mem_pool;
+};
+
+static void
+quit_workers(struct rte_distributor *d, struct rte_mempool *p)
+{
+	const unsigned num_workers = rte_lcore_count() - 2;
+	unsigned i;
+	struct rte_mbuf *bufs[num_workers];
+	rte_mempool_get_bulk(p, (void *)bufs, num_workers);
+
+	for (i = 0; i < num_workers; i++)
+		bufs[i]->hash.rss = i << 1;
+
+	rte_distributor_process(d, bufs, num_workers);
+	rte_mempool_put_bulk(p, (void *)bufs, num_workers);
+}
+
+static int
+lcore_rx(struct lcore_params *p)
+{
+	struct rte_distributor *d = p->d;
+	struct rte_mempool *mem_pool = p->mem_pool;
+	struct rte_ring *r = p->r;
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const int socket_id = rte_socket_id();
+	uint8_t port;
+
+	for (port = 0; port < nb_ports; port++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0)
+			continue;
+
+		if (rte_eth_dev_socket_id(port) > 0 &&
+				rte_eth_dev_socket_id(port) != socket_id)
+			printf("WARNING, port %u is on remote NUMA node to "
+					"RX thread.\n\tPerformance will not "
+					"be optimal.\n", port);
+	}
+
+	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
+	port = 0;
+	while (!quit_signal_rx) {
+
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0) {
+			if (++port == nb_ports)
+				port = 0;
+			continue;
+		}
+		struct rte_mbuf *bufs[BURST_SIZE*2];
+		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
+				BURST_SIZE);
+		app_stats.rx.rx_pkts += nb_rx;
+
+		rte_distributor_process(d, bufs, nb_rx);
+		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
+				bufs, BURST_SIZE*2);
+		app_stats.rx.returned_pkts += nb_ret;
+		if (unlikely(nb_ret == 0))
+			continue;
+
+		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs, nb_ret);
+		app_stats.rx.enqueued_pkts += sent;
+		if (unlikely(sent < nb_ret)) {
+			LOG_DEBUG(DISTRAPP, "%s:Packet loss due to full ring\n", __func__);
+			while (sent < nb_ret)
+				rte_pktmbuf_free(bufs[sent++]);
+		}
+		if (++port == nb_ports)
+			port = 0;
+	}
+	rte_distributor_process(d, NULL, 0);
+	/* flush distributor to bring to known state */
+	rte_distributor_flush(d);
+	/* set worker & tx threads quit flag */
+	quit_signal = 1;
+	/* worker threads may hang in get packet as
+	   distributor process is not runnig, just make sure workers
+	   gets packets till quit_signal is actually been
+	   received and they gracefully shutdown*/
+	quit_workers(d, mem_pool);
+	/* rx thread should quit at last*/
+	return 0;
+}
+
+static inline void
+flush_one_port(struct output_buffer *outbuf, uint8_t outp)
+{
+	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
+			outbuf->count);
+	app_stats.tx.tx_pkts += nb_tx;
+
+	if (unlikely(nb_tx < outbuf->count)) {
+		LOG_DEBUG(DISTRAPP, "%s:Packet loss with tx_burst\n", __func__);
+		do {
+			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
+		} while (++nb_tx < outbuf->count);
+	}
+	outbuf->count = 0;
+}
+
+static inline void
+flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
+{
+	uint8_t outp;
+	for (outp = 0; outp < nb_ports; outp++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << outp)) == 0)
+			continue;
+
+		if (tx_buffers[outp].count == 0)
+			continue;
+
+		flush_one_port(&tx_buffers[outp], outp);
+	}
+}
+
+static int
+lcore_tx(struct rte_ring *in_r)
+{
+	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const int socket_id = rte_socket_id();
+	uint8_t port;
+
+	for (port = 0; port < nb_ports; port++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0)
+			continue;
+
+		if (rte_eth_dev_socket_id(port) > 0 &&
+				rte_eth_dev_socket_id(port) != socket_id)
+			printf("WARNING, port %u is on remote NUMA node to "
+					"TX thread.\n\tPerformance will not "
+					"be optimal.\n", port);
+	}
+
+	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
+	while (!quit_signal) {
+		for (port = 0; port < nb_ports; port++) {
+			/* skip ports that are not enabled */
+			if ((enabled_port_mask & (1 << port)) == 0)
+				continue;
+
+			struct rte_mbuf *bufs[BURST_SIZE];
+			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
+					(void *)bufs, BURST_SIZE);
+			app_stats.tx.dequeue_pkts += nb_rx;
+
+			/* if we get no traffic, flush anything we have */
+			if (unlikely(nb_rx == 0)) {
+				flush_all_ports(tx_buffers, nb_ports);
+				continue;
+			}
+
+			/* for traffic we receive, queue it up for transmit */
+			uint16_t i;
+			_mm_prefetch(bufs[0], 0);
+			_mm_prefetch(bufs[1], 0);
+			_mm_prefetch(bufs[2], 0);
+			for (i = 0; i < nb_rx; i++) {
+				struct output_buffer *outbuf;
+				uint8_t outp;
+				_mm_prefetch(bufs[i + 3], 0);
+				/* workers should update in_port to hold the
+				 * output port value */
+				outp = bufs[i]->port;
+				/* skip ports that are not enabled */
+				if ((enabled_port_mask & (1 << outp)) == 0)
+					continue;
+
+				outbuf = &tx_buffers[outp];
+				outbuf->mbufs[outbuf->count++] = bufs[i];
+				if (outbuf->count == BURST_SIZE)
+					flush_one_port(outbuf, outp);
+			}
+		}
+	}
+	return 0;
+}
+
+static void
+int_handler(int sig_num)
+{
+	printf("Exiting on signal %d\n", sig_num);
+	/* set quit flag for rx thread to exit*/
+	quit_signal_rx = 1;
+}
+
+static void
+print_stats(void)
+{
+	struct rte_eth_stats eth_stats;
+	unsigned i;
+
+	printf("\nRX thread stats:\n");
+	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
+	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
+	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
+
+	printf("\nTX thread stats:\n");
+	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
+	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
+
+	for (i = 0; i < rte_eth_dev_count(); i++) {
+		rte_eth_stats_get(i, &eth_stats);
+		printf("\nPort %u stats:\n", i);
+		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
+		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
+		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
+		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
+		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
+	}
+}
+
+static int
+lcore_worker(struct lcore_params *p)
+{
+	struct rte_distributor *d = p->d;
+	const unsigned id = p->worker_id;
+	/* for single port, xor_val will be zero so we won't modify the output
+	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
+	 */
+	const unsigned xor_val = (rte_eth_dev_count() > 1);
+	struct rte_mbuf *buf = NULL;
+
+	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
+	while (!quit_signal) {
+		buf = rte_distributor_get_pkt(d, id, buf);
+		buf->port ^= xor_val;
+	}
+	return 0;
+}
+
+/* display usage */
+static void
+print_usage(const char *prgname)
+{
+	printf("%s [EAL options] -- -p PORTMASK\n"
+			"  -p PORTMASK: hexadecimal bitmask of ports to configure\n",
+			prgname);
+}
+
+static int
+parse_portmask(const char *portmask)
+{
+	char *end = NULL;
+	unsigned long pm;
+
+	/* parse hexadecimal string */
+	pm = strtoul(portmask, &end, 16);
+	if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+		return -1;
+
+	if (pm == 0)
+		return -1;
+
+	return pm;
+}
+
+/* Parse the argument given in the command line of the application */
+static int
+parse_args(int argc, char **argv)
+{
+	int opt;
+	char **argvopt;
+	int option_index;
+	char *prgname = argv[0];
+	static struct option lgopts[] = {
+		{NULL, 0, 0, 0}
+	};
+
+	argvopt = argv;
+
+	while ((opt = getopt_long(argc, argvopt, "p:",
+			lgopts, &option_index)) != EOF) {
+
+		switch (opt) {
+			/* portmask */
+			case 'p':
+				enabled_port_mask = parse_portmask(optarg);
+				if (enabled_port_mask == 0) {
+					printf("invalid portmask\n");
+					print_usage(prgname);
+					return -1;
+				}
+				break;
+
+			default:
+				print_usage(prgname);
+				return -1;
+		}
+	}
+
+if (optind <= 1) {
+	print_usage(prgname);
+	return -1;
+}
+
+	argv[optind-1] = prgname;
+
+	optind = 0; /* reset getopt lib */
+	return 0;
+}
+
+/* Main function, does initialization and calls the per-lcore functions */
+int
+MAIN(int argc, char *argv[])
+{
+	struct rte_mempool *mbuf_pool;
+	struct rte_distributor *d;
+	struct rte_ring *output_ring;
+	unsigned lcore_id, worker_id = 0;
+	unsigned nb_ports;
+	uint8_t portid;
+	uint8_t nb_ports_available;
+
+	/* catch ctrl-c so we can print on exit */
+	signal(SIGINT, int_handler);
+
+	/* init EAL */
+	int ret = rte_eal_init(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+	argc -= ret;
+	argv += ret;
+
+	/* parse application arguments (after the EAL ones) */
+	ret = parse_args(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "Invalid distributor parameters\n");
+
+	if (rte_lcore_count() < 3)
+		rte_exit(EXIT_FAILURE, "Error, This application needs at "
+				"least 3 logical cores to run:\n"
+				"1 lcore for packet RX and distribution\n"
+				"1 lcore for packet TX\n"
+				"and at least 1 lcore for worker threads\n");
+
+	nb_ports = rte_eth_dev_count();
+	if (nb_ports == 0)
+		rte_exit(EXIT_FAILURE, "Error: no ethernet ports detected\n");
+	if (nb_ports != 1 && (nb_ports & 1))
+		rte_exit(EXIT_FAILURE, "Error: number of ports must be even, except "
+				"when using a single port\n");
+
+	mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
+			MBUF_SIZE, MBUF_CACHE_SIZE,
+			sizeof(struct rte_pktmbuf_pool_private),
+			rte_pktmbuf_pool_init, NULL,
+			rte_pktmbuf_init, NULL,
+			rte_socket_id(), 0);
+	if (mbuf_pool == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+	nb_ports_available = nb_ports;
+
+	/* initialize all ports */
+	for (portid = 0; portid < nb_ports; portid++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << portid)) == 0) {
+			printf("\nSkipping disabled port %d\n", portid);
+			nb_ports_available--;
+			continue;
+		}
+		/* init port */
+		printf("Initializing port %u... done\n", (unsigned) portid);
+
+		if (port_init(portid, mbuf_pool) != 0)
+			rte_exit(EXIT_FAILURE, "Cannot initialize port %"PRIu8"\n",
+					portid);
+	}
+
+	if (!nb_ports_available) {
+		rte_exit(EXIT_FAILURE,
+				"All available ports are disabled. Please set portmask.\n");
+	}
+
+	d = rte_distributor_create("PKT_DIST", rte_socket_id(),
+			rte_lcore_count() - 2);
+	if (d == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create distributor\n");
+
+	/* scheduler ring is read only by the transmitter core, but written to
+	 * by multiple threads
+	 */
+	output_ring = rte_ring_create("Output_ring", RTE_RING_SZ,
+			rte_socket_id(), RING_F_SC_DEQ);
+	if (output_ring == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create output ring\n");
+
+	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+		if (worker_id == rte_lcore_count() - 2)
+			rte_eal_remote_launch((lcore_function_t *)lcore_tx,
+					output_ring, lcore_id);
+		else {
+			struct lcore_params *p =
+					rte_malloc(NULL, sizeof(*p), 0);
+			if (!p)
+				rte_panic("malloc failure\n");
+			*p = (struct lcore_params){worker_id, d, output_ring, mbuf_pool};
+
+			rte_eal_remote_launch((lcore_function_t *)lcore_worker,
+					p, lcore_id);
+		}
+		worker_id++;
+	}
+	/* call lcore_main on master core only */
+	struct lcore_params p = { 0, d, output_ring, mbuf_pool};
+	lcore_rx(&p);
+
+	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+		if (rte_eal_wait_lcore(lcore_id) < 0)
+			return -1;
+	}
+
+	print_stats();
+	return 0;
+}
diff --git a/examples/distributor_app/main.h b/examples/distributor_app/main.h
new file mode 100644
index 0000000..2682d15
--- /dev/null
+++ b/examples/distributor_app/main.h
@@ -0,0 +1,46 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char *argv[]);
+
+#endif /* ifndef _MAIN_H_ */
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v6] distributor_app: new sample app
  2014-10-17 13:59         ` [dpdk-dev] [PATCH v6] " Reshma Pattan
@ 2014-11-02 20:08           ` De Lara Guarch, Pablo
  2014-11-03 15:49           ` [dpdk-dev] [PATCH v7] " Reshma Pattan
  1 sibling, 0 replies; 38+ messages in thread
From: De Lara Guarch, Pablo @ 2014-11-02 20:08 UTC (permalink / raw)
  To: Pattan, Reshma; +Cc: dev

Hi Reshma,

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Reshma Pattan
[...]

> diff --git a/examples/distributor_app/main.c
> b/examples/distributor_app/main.c
> new file mode 100644
> index 0000000..c9994a6
> --- /dev/null
> +++ b/examples/distributor_app/main.c
> @@ -0,0 +1,642 @@

[...]

> +static const struct rte_eth_rxconf rx_conf_default = {
> +	.rx_thresh = {
> +		.pthresh = RX_PTHRESH,
> +		.hthresh = RX_HTHRESH,
> +		.wthresh = RX_WTHRESH,
> +	},
> +	.rx_free_thresh = RX_FREE_THRESH,
> +	.rx_drop_en = 0,
> +};
> +
> +static const struct rte_eth_txconf tx_conf_default = {
> +	.tx_thresh = {
> +		.pthresh = TX_PTHRESH,
> +		.hthresh = TX_HTHRESH,
> +		.wthresh = TX_WTHRESH,
> +	},
> +	.tx_free_thresh = TX_FREE_THRESH,
> +	.tx_rs_thresh = TX_RSBIT_THRESH,
> +	.txq_flags = TX_Q_FLAGS
> +
> +};

You can remove these two structures (and all the macros involved),
if you pass NULL to rxconf/txconf parameters when calling RX/TX queue setup.

[...]

> +static inline int
> +port_init(uint8_t port, struct rte_mempool *mbuf_pool)
> +{
> +	struct rte_eth_conf port_conf = port_conf_default;
> +	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
> +	int retval;
> +	uint16_t q;
> +
> +	if (port >= rte_eth_dev_count())
> +		return -1;
> +
> +	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
> +	if (retval != 0)
> +		return retval;
> +
> +	for (q = 0; q < rxRings; q++) {
> +		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
> +
> 	rte_eth_dev_socket_id(port),
> +						&rx_conf_default,
> mbuf_pool);

Recently, a new functionality has been added for RX/TX queue setup. 
You can now use NULL as rxconf/txconf parameter, so it will use 
the optimal configuration, so it will save you some lines of code and simplify it.

> +		if (retval < 0)
> +			return retval;
> +	}
> +
> +	for (q = 0; q < txRings; q++) {
> +		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
> +
> 	rte_eth_dev_socket_id(port),
> +						&tx_conf_default);
> +		if (retval < 0)
> +			return retval;
> +	}
> +
> +	retval  = rte_eth_dev_start(port);

Remove second space before "=".

> +	if (retval < 0)
> +		return retval;
> +

[...]

> +	rte_distributor_process(d, NULL, 0);
> +	/* flush distributor to bring to known state */
> +	rte_distributor_flush(d);
> +	/* set worker & tx threads quit flag */
> +	quit_signal = 1;
> +	/* worker threads may hang in get packet as
> +	   distributor process is not runnig, just make sure workers
> +	   gets packets till quit_signal is actually been
> +	   received and they gracefully shutdown*/

Typos in "running" and "workers gets". Plus, use standard multi-line comments.

> +	quit_workers(d, mem_pool);
> +	/* rx thread should quit at last*/
> +	return 0;
> +}
> +

 [...]

> +static int
> +lcore_worker(struct lcore_params *p)
> +{
> +	struct rte_distributor *d = p->d;
> +	const unsigned id = p->worker_id;
> +	/* for single port, xor_val will be zero so we won't modify the output
> +	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
> +	 */

Move "/*" to the first line, to be consistent with other multi-line comments.
 
> +	const unsigned xor_val = (rte_eth_dev_count() > 1);
> +	struct rte_mbuf *buf = NULL;
> +
> +	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
> +	while (!quit_signal) {
> +		buf = rte_distributor_get_pkt(d, id, buf);
> +		buf->port ^= xor_val;
> +	}
> +	return 0;

[...]

> +			default:
> +				print_usage(prgname);
> +				return -1;
> +		}
> +	}
> +
> +if (optind <= 1) {
> +	print_usage(prgname);
> +	return -1;
> +}

Missing indentation.

> +
> +	argv[optind-1] = prgname;
> +
> +	optind = 0; /* reset getopt lib */
> +	return 0;
> +}

Thanks,
Pablo

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [dpdk-dev] [PATCH v7] distributor_app: new sample app
  2014-10-17 13:59         ` [dpdk-dev] [PATCH v6] " Reshma Pattan
  2014-11-02 20:08           ` De Lara Guarch, Pablo
@ 2014-11-03 15:49           ` Reshma Pattan
  2014-11-03 16:03             ` De Lara Guarch, Pablo
  1 sibling, 1 reply; 38+ messages in thread
From: Reshma Pattan @ 2014-11-03 15:49 UTC (permalink / raw)
  To: dev

From: Reshma Pattan <reshma.pattan@intel.com>

A new sample app that shows the usage of the distributor library. This
app works as follows:

* An RX thread runs which pulls packets from each ethernet port in turn
  and passes those packets to worker using a distributor component.
* The workers take the packets in turn, and determine the output port
  for those packets using basic l2forwarding doing an xor on the source
  port id.
* The RX thread takes the returned packets from the workers and enqueue
  those packets into an rte_ring structure.
* A TX thread pulls the packets off the rte_ring structure and then
  sends each packet out the output port specified previously by the worker
* Command-line option support provided only for portmask.

v5 change:
* Handled gracefull shutdown of rx and tx threads upon SIGINT.

v6 change:
* modified graceful shutdown logic to handle all threads upon SIGINT
* removed call to rte_eal_pci_probe()
* added seperate print_stats function

v7 change:
* passing NULL as rxconf/txconf parameter for rx/tx queue setup
* removed zero-ed fields from port conf structure
* fixed style related comments


Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
---
 examples/Makefile                 |    1 +
 examples/distributor_app/Makefile |   57 ++++
 examples/distributor_app/main.c   |  606 +++++++++++++++++++++++++++++++++++++
 examples/distributor_app/main.h   |   46 +++
 4 files changed, 710 insertions(+), 0 deletions(-)
 create mode 100644 examples/distributor_app/Makefile
 create mode 100644 examples/distributor_app/main.c
 create mode 100644 examples/distributor_app/main.h

diff --git a/examples/Makefile b/examples/Makefile
index 48c4dfc..4bf144a 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -66,5 +66,6 @@ DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += vhost
 DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
 DIRS-y += vmdq
 DIRS-y += vmdq_dcb
+DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor_app
 
 include $(RTE_SDK)/mk/rte.extsubdir.mk
diff --git a/examples/distributor_app/Makefile b/examples/distributor_app/Makefile
new file mode 100644
index 0000000..6a5bada
--- /dev/null
+++ b/examples/distributor_app/Makefile
@@ -0,0 +1,57 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = distributor_app
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+EXTRA_CFLAGS += -O3 -Wfatal-errors
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/distributor_app/main.c b/examples/distributor_app/main.c
new file mode 100644
index 0000000..476b671
--- /dev/null
+++ b/examples/distributor_app/main.c
@@ -0,0 +1,606 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <signal.h>
+#include <getopt.h>
+
+#include <rte_eal.h>
+#include <rte_ethdev.h>
+#include <rte_cycles.h>
+#include <rte_malloc.h>
+#include <rte_debug.h>
+#include <rte_distributor.h>
+
+#include "main.h"
+
+#define RX_RING_SIZE 256
+#define TX_RING_SIZE 512
+#define NUM_MBUFS ((64*1024)-1)
+#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_CACHE_SIZE 250
+#define BURST_SIZE 32
+#define RTE_RING_SZ 1024
+
+/* uncommnet below line to enable debug logs */
+/* #define DEBUG */
+
+#ifdef DEBUG
+#define LOG_LEVEL RTE_LOG_DEBUG
+#define LOG_DEBUG(log_type, fmt, args...) do {	\
+	RTE_LOG(DEBUG, log_type, fmt, ##args)		\
+} while (0)
+#else
+#define LOG_LEVEL RTE_LOG_INFO
+#define LOG_DEBUG(log_type, fmt, args...) do {} while (0)
+#endif
+
+#define RTE_LOGTYPE_DISTRAPP RTE_LOGTYPE_USER1
+
+/* mask of enabled ports */
+static uint32_t enabled_port_mask;
+volatile uint8_t quit_signal;
+volatile uint8_t quit_signal_rx;
+
+static volatile struct app_stats {
+	struct {
+		uint64_t rx_pkts;
+		uint64_t returned_pkts;
+		uint64_t enqueued_pkts;
+	} rx __rte_cache_aligned;
+
+	struct {
+		uint64_t dequeue_pkts;
+		uint64_t tx_pkts;
+	} tx __rte_cache_aligned;
+} app_stats;
+
+static const struct rte_eth_conf port_conf_default = {
+	.rxmode = {
+		.mq_mode = ETH_MQ_RX_RSS,
+		.max_rx_pkt_len = ETHER_MAX_LEN,
+	},
+	.txmode = {
+		.mq_mode = ETH_MQ_TX_NONE,
+	},
+	.rx_adv_conf = {
+			.rss_conf = {
+				.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6 |
+					ETH_RSS_IPV4_TCP | ETH_RSS_IPV4_UDP |
+					ETH_RSS_IPV6_TCP | ETH_RSS_IPV6_UDP,
+			}
+	},
+};
+
+struct output_buffer {
+	unsigned count;
+	struct rte_mbuf *mbufs[BURST_SIZE];
+};
+
+/*
+ * Initialises a given port using global settings and with the rx buffers
+ * coming from the mbuf_pool passed as parameter
+ */
+static inline int
+port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+{
+	struct rte_eth_conf port_conf = port_conf_default;
+	const uint16_t rxRings = 1, txRings = rte_lcore_count() - 1;
+	int retval;
+	uint16_t q;
+
+	if (port >= rte_eth_dev_count())
+		return -1;
+
+	retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
+	if (retval != 0)
+		return retval;
+
+	for (q = 0; q < rxRings; q++) {
+		retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
+						rte_eth_dev_socket_id(port),
+						NULL, mbuf_pool);
+		if (retval < 0)
+			return retval;
+	}
+
+	for (q = 0; q < txRings; q++) {
+		retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
+						rte_eth_dev_socket_id(port),
+						NULL);
+		if (retval < 0)
+			return retval;
+	}
+
+	retval = rte_eth_dev_start(port);
+	if (retval < 0)
+		return retval;
+
+	struct rte_eth_link link;
+	rte_eth_link_get_nowait(port, &link);
+	if (!link.link_status) {
+		sleep(1);
+		rte_eth_link_get_nowait(port, &link);
+	}
+
+	if (!link.link_status) {
+		printf("Link down on port %"PRIu8"\n", port);
+		return 0;
+	}
+
+	struct ether_addr addr;
+	rte_eth_macaddr_get(port, &addr);
+	printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
+			(unsigned)port,
+			addr.addr_bytes[0], addr.addr_bytes[1],
+			addr.addr_bytes[2], addr.addr_bytes[3],
+			addr.addr_bytes[4], addr.addr_bytes[5]);
+
+	rte_eth_promiscuous_enable(port);
+
+	return 0;
+}
+
+struct lcore_params {
+	unsigned worker_id;
+	struct rte_distributor *d;
+	struct rte_ring *r;
+	struct rte_mempool *mem_pool;
+};
+
+static void
+quit_workers(struct rte_distributor *d, struct rte_mempool *p)
+{
+	const unsigned num_workers = rte_lcore_count() - 2;
+	unsigned i;
+	struct rte_mbuf *bufs[num_workers];
+	rte_mempool_get_bulk(p, (void *)bufs, num_workers);
+
+	for (i = 0; i < num_workers; i++)
+		bufs[i]->hash.rss = i << 1;
+
+	rte_distributor_process(d, bufs, num_workers);
+	rte_mempool_put_bulk(p, (void *)bufs, num_workers);
+}
+
+static int
+lcore_rx(struct lcore_params *p)
+{
+	struct rte_distributor *d = p->d;
+	struct rte_mempool *mem_pool = p->mem_pool;
+	struct rte_ring *r = p->r;
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const int socket_id = rte_socket_id();
+	uint8_t port;
+
+	for (port = 0; port < nb_ports; port++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0)
+			continue;
+
+		if (rte_eth_dev_socket_id(port) > 0 &&
+				rte_eth_dev_socket_id(port) != socket_id)
+			printf("WARNING, port %u is on remote NUMA node to "
+					"RX thread.\n\tPerformance will not "
+					"be optimal.\n", port);
+	}
+
+	printf("\nCore %u doing packet RX.\n", rte_lcore_id());
+	port = 0;
+	while (!quit_signal_rx) {
+
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0) {
+			if (++port == nb_ports)
+				port = 0;
+			continue;
+		}
+		struct rte_mbuf *bufs[BURST_SIZE*2];
+		const uint16_t nb_rx = rte_eth_rx_burst(port, 0, bufs,
+				BURST_SIZE);
+		app_stats.rx.rx_pkts += nb_rx;
+
+		rte_distributor_process(d, bufs, nb_rx);
+		const uint16_t nb_ret = rte_distributor_returned_pkts(d,
+				bufs, BURST_SIZE*2);
+		app_stats.rx.returned_pkts += nb_ret;
+		if (unlikely(nb_ret == 0))
+			continue;
+
+		uint16_t sent = rte_ring_enqueue_burst(r, (void *)bufs, nb_ret);
+		app_stats.rx.enqueued_pkts += sent;
+		if (unlikely(sent < nb_ret)) {
+			LOG_DEBUG(DISTRAPP, "%s:Packet loss due to full ring\n", __func__);
+			while (sent < nb_ret)
+				rte_pktmbuf_free(bufs[sent++]);
+		}
+		if (++port == nb_ports)
+			port = 0;
+	}
+	rte_distributor_process(d, NULL, 0);
+	/* flush distributor to bring to known state */
+	rte_distributor_flush(d);
+	/* set worker & tx threads quit flag */
+	quit_signal = 1;
+	/*
+	 * worker threads may hang in get packet as
+	 * distributor process is not running, just make sure workers
+	 * get packets till quit_signal is actually been
+	 * received and they gracefully shutdown
+	 */
+	quit_workers(d, mem_pool);
+	/* rx thread should quit at last */
+	return 0;
+}
+
+static inline void
+flush_one_port(struct output_buffer *outbuf, uint8_t outp)
+{
+	unsigned nb_tx = rte_eth_tx_burst(outp, 0, outbuf->mbufs,
+			outbuf->count);
+	app_stats.tx.tx_pkts += nb_tx;
+
+	if (unlikely(nb_tx < outbuf->count)) {
+		LOG_DEBUG(DISTRAPP, "%s:Packet loss with tx_burst\n", __func__);
+		do {
+			rte_pktmbuf_free(outbuf->mbufs[nb_tx]);
+		} while (++nb_tx < outbuf->count);
+	}
+	outbuf->count = 0;
+}
+
+static inline void
+flush_all_ports(struct output_buffer *tx_buffers, uint8_t nb_ports)
+{
+	uint8_t outp;
+	for (outp = 0; outp < nb_ports; outp++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << outp)) == 0)
+			continue;
+
+		if (tx_buffers[outp].count == 0)
+			continue;
+
+		flush_one_port(&tx_buffers[outp], outp);
+	}
+}
+
+static int
+lcore_tx(struct rte_ring *in_r)
+{
+	static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const int socket_id = rte_socket_id();
+	uint8_t port;
+
+	for (port = 0; port < nb_ports; port++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << port)) == 0)
+			continue;
+
+		if (rte_eth_dev_socket_id(port) > 0 &&
+				rte_eth_dev_socket_id(port) != socket_id)
+			printf("WARNING, port %u is on remote NUMA node to "
+					"TX thread.\n\tPerformance will not "
+					"be optimal.\n", port);
+	}
+
+	printf("\nCore %u doing packet TX.\n", rte_lcore_id());
+	while (!quit_signal) {
+
+		for (port = 0; port < nb_ports; port++) {
+			/* skip ports that are not enabled */
+			if ((enabled_port_mask & (1 << port)) == 0)
+				continue;
+
+			struct rte_mbuf *bufs[BURST_SIZE];
+			const uint16_t nb_rx = rte_ring_dequeue_burst(in_r,
+					(void *)bufs, BURST_SIZE);
+			app_stats.tx.dequeue_pkts += nb_rx;
+
+			/* if we get no traffic, flush anything we have */
+			if (unlikely(nb_rx == 0)) {
+				flush_all_ports(tx_buffers, nb_ports);
+				continue;
+			}
+
+			/* for traffic we receive, queue it up for transmit */
+			uint16_t i;
+			_mm_prefetch(bufs[0], 0);
+			_mm_prefetch(bufs[1], 0);
+			_mm_prefetch(bufs[2], 0);
+			for (i = 0; i < nb_rx; i++) {
+				struct output_buffer *outbuf;
+				uint8_t outp;
+				_mm_prefetch(bufs[i + 3], 0);
+				/*
+				 * workers should update in_port to hold the
+				 * output port value
+				 */
+				outp = bufs[i]->port;
+				/* skip ports that are not enabled */
+				if ((enabled_port_mask & (1 << outp)) == 0)
+					continue;
+
+				outbuf = &tx_buffers[outp];
+				outbuf->mbufs[outbuf->count++] = bufs[i];
+				if (outbuf->count == BURST_SIZE)
+					flush_one_port(outbuf, outp);
+			}
+		}
+	}
+	return 0;
+}
+
+static void
+int_handler(int sig_num)
+{
+	printf("Exiting on signal %d\n", sig_num);
+	/* set quit flag for rx thread to exit */
+	quit_signal_rx = 1;
+}
+
+static void
+print_stats(void)
+{
+	struct rte_eth_stats eth_stats;
+	unsigned i;
+
+	printf("\nRX thread stats:\n");
+	printf(" - Received:    %"PRIu64"\n", app_stats.rx.rx_pkts);
+	printf(" - Processed:   %"PRIu64"\n", app_stats.rx.returned_pkts);
+	printf(" - Enqueued:    %"PRIu64"\n", app_stats.rx.enqueued_pkts);
+
+	printf("\nTX thread stats:\n");
+	printf(" - Dequeued:    %"PRIu64"\n", app_stats.tx.dequeue_pkts);
+	printf(" - Transmitted: %"PRIu64"\n", app_stats.tx.tx_pkts);
+
+	for (i = 0; i < rte_eth_dev_count(); i++) {
+		rte_eth_stats_get(i, &eth_stats);
+		printf("\nPort %u stats:\n", i);
+		printf(" - Pkts in:   %"PRIu64"\n", eth_stats.ipackets);
+		printf(" - Pkts out:  %"PRIu64"\n", eth_stats.opackets);
+		printf(" - In Errs:   %"PRIu64"\n", eth_stats.ierrors);
+		printf(" - Out Errs:  %"PRIu64"\n", eth_stats.oerrors);
+		printf(" - Mbuf Errs: %"PRIu64"\n", eth_stats.rx_nombuf);
+	}
+}
+
+static int
+lcore_worker(struct lcore_params *p)
+{
+	struct rte_distributor *d = p->d;
+	const unsigned id = p->worker_id;
+	/*
+	 * for single port, xor_val will be zero so we won't modify the output
+	 * port, otherwise we send traffic from 0 to 1, 2 to 3, and vice versa
+	 */
+	const unsigned xor_val = (rte_eth_dev_count() > 1);
+	struct rte_mbuf *buf = NULL;
+
+	printf("\nCore %u acting as worker core.\n", rte_lcore_id());
+	while (!quit_signal) {
+		buf = rte_distributor_get_pkt(d, id, buf);
+		buf->port ^= xor_val;
+	}
+	return 0;
+}
+
+/* display usage */
+static void
+print_usage(const char *prgname)
+{
+	printf("%s [EAL options] -- -p PORTMASK\n"
+			"  -p PORTMASK: hexadecimal bitmask of ports to configure\n",
+			prgname);
+}
+
+static int
+parse_portmask(const char *portmask)
+{
+	char *end = NULL;
+	unsigned long pm;
+
+	/* parse hexadecimal string */
+	pm = strtoul(portmask, &end, 16);
+	if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+		return -1;
+
+	if (pm == 0)
+		return -1;
+
+	return pm;
+}
+
+/* Parse the argument given in the command line of the application */
+static int
+parse_args(int argc, char **argv)
+{
+	int opt;
+	char **argvopt;
+	int option_index;
+	char *prgname = argv[0];
+	static struct option lgopts[] = {
+		{NULL, 0, 0, 0}
+	};
+
+	argvopt = argv;
+
+	while ((opt = getopt_long(argc, argvopt, "p:",
+			lgopts, &option_index)) != EOF) {
+
+		switch (opt) {
+			/* portmask */
+			case 'p':
+				enabled_port_mask = parse_portmask(optarg);
+				if (enabled_port_mask == 0) {
+					printf("invalid portmask\n");
+					print_usage(prgname);
+					return -1;
+				}
+				break;
+
+			default:
+				print_usage(prgname);
+				return -1;
+		}
+	}
+
+	if (optind <= 1) {
+		print_usage(prgname);
+		return -1;
+	}
+
+	argv[optind-1] = prgname;
+
+	optind = 0; /* reset getopt lib */
+	return 0;
+}
+
+/* Main function, does initialization and calls the per-lcore functions */
+int
+MAIN(int argc, char *argv[])
+{
+	struct rte_mempool *mbuf_pool;
+	struct rte_distributor *d;
+	struct rte_ring *output_ring;
+	unsigned lcore_id, worker_id = 0;
+	unsigned nb_ports;
+	uint8_t portid;
+	uint8_t nb_ports_available;
+
+	/* catch ctrl-c so we can print on exit */
+	signal(SIGINT, int_handler);
+
+	/* init EAL */
+	int ret = rte_eal_init(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+	argc -= ret;
+	argv += ret;
+
+	/* parse application arguments (after the EAL ones) */
+	ret = parse_args(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "Invalid distributor parameters\n");
+
+	if (rte_lcore_count() < 3)
+		rte_exit(EXIT_FAILURE, "Error, This application needs at "
+				"least 3 logical cores to run:\n"
+				"1 lcore for packet RX and distribution\n"
+				"1 lcore for packet TX\n"
+				"and at least 1 lcore for worker threads\n");
+
+	nb_ports = rte_eth_dev_count();
+	if (nb_ports == 0)
+		rte_exit(EXIT_FAILURE, "Error: no ethernet ports detected\n");
+	if (nb_ports != 1 && (nb_ports & 1))
+		rte_exit(EXIT_FAILURE, "Error: number of ports must be even, except "
+				"when using a single port\n");
+
+	mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
+			MBUF_SIZE, MBUF_CACHE_SIZE,
+			sizeof(struct rte_pktmbuf_pool_private),
+			rte_pktmbuf_pool_init, NULL,
+			rte_pktmbuf_init, NULL,
+			rte_socket_id(), 0);
+	if (mbuf_pool == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+	nb_ports_available = nb_ports;
+
+	/* initialize all ports */
+	for (portid = 0; portid < nb_ports; portid++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << portid)) == 0) {
+			printf("\nSkipping disabled port %d\n", portid);
+			nb_ports_available--;
+			continue;
+		}
+		/* init port */
+		printf("Initializing port %u... done\n", (unsigned) portid);
+
+		if (port_init(portid, mbuf_pool) != 0)
+			rte_exit(EXIT_FAILURE, "Cannot initialize port %"PRIu8"\n",
+					portid);
+	}
+
+	if (!nb_ports_available) {
+		rte_exit(EXIT_FAILURE,
+				"All available ports are disabled. Please set portmask.\n");
+	}
+
+	d = rte_distributor_create("PKT_DIST", rte_socket_id(),
+			rte_lcore_count() - 2);
+	if (d == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create distributor\n");
+
+	/*
+	 * scheduler ring is read only by the transmitter core, but written to
+	 * by multiple threads
+	 */
+	output_ring = rte_ring_create("Output_ring", RTE_RING_SZ,
+			rte_socket_id(), RING_F_SC_DEQ);
+	if (output_ring == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create output ring\n");
+
+	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+		if (worker_id == rte_lcore_count() - 2)
+			rte_eal_remote_launch((lcore_function_t *)lcore_tx,
+					output_ring, lcore_id);
+		else {
+			struct lcore_params *p =
+					rte_malloc(NULL, sizeof(*p), 0);
+			if (!p)
+				rte_panic("malloc failure\n");
+			*p = (struct lcore_params){worker_id, d, output_ring, mbuf_pool};
+
+			rte_eal_remote_launch((lcore_function_t *)lcore_worker,
+					p, lcore_id);
+		}
+		worker_id++;
+	}
+	/* call lcore_main on master core only */
+	struct lcore_params p = { 0, d, output_ring, mbuf_pool};
+	lcore_rx(&p);
+
+	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+		if (rte_eal_wait_lcore(lcore_id) < 0)
+			return -1;
+	}
+
+	print_stats();
+	return 0;
+}
diff --git a/examples/distributor_app/main.h b/examples/distributor_app/main.h
new file mode 100644
index 0000000..2682d15
--- /dev/null
+++ b/examples/distributor_app/main.h
@@ -0,0 +1,46 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char *argv[]);
+
+#endif /* ifndef _MAIN_H_ */
-- 
1.7.4.1

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v7] distributor_app: new sample app
  2014-11-03 15:49           ` [dpdk-dev] [PATCH v7] " Reshma Pattan
@ 2014-11-03 16:03             ` De Lara Guarch, Pablo
  2014-11-13 21:30               ` Thomas Monjalon
  0 siblings, 1 reply; 38+ messages in thread
From: De Lara Guarch, Pablo @ 2014-11-03 16:03 UTC (permalink / raw)
  To: Pattan, Reshma; +Cc: dev



> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Reshma Pattan
> Sent: Monday, November 03, 2014 3:50 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v7] distributor_app: new sample app
> 
> From: Reshma Pattan <reshma.pattan@intel.com>
> 
> A new sample app that shows the usage of the distributor library. This
> app works as follows:
> 
> * An RX thread runs which pulls packets from each ethernet port in turn
>   and passes those packets to worker using a distributor component.
> * The workers take the packets in turn, and determine the output port
>   for those packets using basic l2forwarding doing an xor on the source
>   port id.
> * The RX thread takes the returned packets from the workers and enqueue
>   those packets into an rte_ring structure.
> * A TX thread pulls the packets off the rte_ring structure and then
>   sends each packet out the output port specified previously by the worker
> * Command-line option support provided only for portmask.
> 
> v5 change:
> * Handled gracefull shutdown of rx and tx threads upon SIGINT.
> 
> v6 change:
> * modified graceful shutdown logic to handle all threads upon SIGINT
> * removed call to rte_eal_pci_probe()
> * added seperate print_stats function
> 
> v7 change:
> * passing NULL as rxconf/txconf parameter for rx/tx queue setup
> * removed zero-ed fields from port conf structure
> * fixed style related comments
> 
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>

Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v7] distributor_app: new sample app
  2014-11-03 16:03             ` De Lara Guarch, Pablo
@ 2014-11-13 21:30               ` Thomas Monjalon
  2014-11-14  8:44                 ` Pattan, Reshma
  0 siblings, 1 reply; 38+ messages in thread
From: Thomas Monjalon @ 2014-11-13 21:30 UTC (permalink / raw)
  To: Pattan, Reshma; +Cc: dev

Hi Reshma,

> > From: Reshma Pattan <reshma.pattan@intel.com>
> > 
> > A new sample app that shows the usage of the distributor library. This
> > app works as follows:
> > 
> > * An RX thread runs which pulls packets from each ethernet port in turn
> >   and passes those packets to worker using a distributor component.
> > * The workers take the packets in turn, and determine the output port
> >   for those packets using basic l2forwarding doing an xor on the source
> >   port id.
> > * The RX thread takes the returned packets from the workers and enqueue
> >   those packets into an rte_ring structure.
> > * A TX thread pulls the packets off the rte_ring structure and then
> >   sends each packet out the output port specified previously by the worker
> > * Command-line option support provided only for portmask.
> > 
> > v5 change:
> > * Handled gracefull shutdown of rx and tx threads upon SIGINT.
> > 
> > v6 change:
> > * modified graceful shutdown logic to handle all threads upon SIGINT
> > * removed call to rte_eal_pci_probe()
> > * added seperate print_stats function
> > 
> > v7 change:
> > * passing NULL as rxconf/txconf parameter for rx/tx queue setup
> > * removed zero-ed fields from port conf structure
> > * fixed style related comments
> > 
> > 
> > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
> 
> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

Before applying this patch, I have 2 comments:
- Other examples directories don't have _app suffix.
- checkpatch reports "switch and case should be at the same indent"

If you agree I will fix these 2 minor issues before applying.

Thanks
-- 
Thomas

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v7] distributor_app: new sample app
  2014-11-13 21:30               ` Thomas Monjalon
@ 2014-11-14  8:44                 ` Pattan, Reshma
  2014-11-16 21:59                   ` Thomas Monjalon
  0 siblings, 1 reply; 38+ messages in thread
From: Pattan, Reshma @ 2014-11-14  8:44 UTC (permalink / raw)
  To: Thomas Monjalon; +Cc: dev



> -----Original Message-----
> From: Thomas Monjalon [mailto:thomas.monjalon@6wind.com]
> Sent: Thursday, November 13, 2014 9:30 PM
> To: Pattan, Reshma
> Cc: dev@dpdk.org; De Lara Guarch, Pablo
> Subject: Re: [dpdk-dev] [PATCH v7] distributor_app: new sample app
> 
> Hi Reshma,
> 
> > > From: Reshma Pattan <reshma.pattan@intel.com>
> > >
> > > A new sample app that shows the usage of the distributor library.
> > > This app works as follows:
> > >
> > > * An RX thread runs which pulls packets from each ethernet port in turn
> > >   and passes those packets to worker using a distributor component.
> > > * The workers take the packets in turn, and determine the output port
> > >   for those packets using basic l2forwarding doing an xor on the source
> > >   port id.
> > > * The RX thread takes the returned packets from the workers and enqueue
> > >   those packets into an rte_ring structure.
> > > * A TX thread pulls the packets off the rte_ring structure and then
> > >   sends each packet out the output port specified previously by the
> > > worker
> > > * Command-line option support provided only for portmask.
> > >
> > > v5 change:
> > > * Handled gracefull shutdown of rx and tx threads upon SIGINT.
> > >
> > > v6 change:
> > > * modified graceful shutdown logic to handle all threads upon SIGINT
> > > * removed call to rte_eal_pci_probe()
> > > * added seperate print_stats function
> > >
> > > v7 change:
> > > * passing NULL as rxconf/txconf parameter for rx/tx queue setup
> > > * removed zero-ed fields from port conf structure
> > > * fixed style related comments
> > >
> > >
> > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > > Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
> >
> > Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
> 
> Before applying this patch, I have 2 comments:
> - Other examples directories don't have _app suffix.
> - checkpatch reports "switch and case should be at the same indent"
> 
> If you agree I will fix these 2 minor issues before applying.

Fine with me. You can proceed.

Thanks,
Reshma
> 
> Thanks
> --
> Thomas

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [dpdk-dev] [PATCH v7] distributor_app: new sample app
  2014-11-14  8:44                 ` Pattan, Reshma
@ 2014-11-16 21:59                   ` Thomas Monjalon
  0 siblings, 0 replies; 38+ messages in thread
From: Thomas Monjalon @ 2014-11-16 21:59 UTC (permalink / raw)
  To: Pattan, Reshma; +Cc: dev

2014-11-14 08:44, Pattan, Reshma:
> From: Thomas Monjalon [mailto:thomas.monjalon@6wind.com]
> > > > From: Reshma Pattan <reshma.pattan@intel.com>
> > > >
> > > > A new sample app that shows the usage of the distributor library.
> > > > This app works as follows:
> > > >
> > > > * An RX thread runs which pulls packets from each ethernet port in turn
> > > >   and passes those packets to worker using a distributor component.
> > > > * The workers take the packets in turn, and determine the output port
> > > >   for those packets using basic l2forwarding doing an xor on the source
> > > >   port id.
> > > > * The RX thread takes the returned packets from the workers and enqueue
> > > >   those packets into an rte_ring structure.
> > > > * A TX thread pulls the packets off the rte_ring structure and then
> > > >   sends each packet out the output port specified previously by the
> > > > worker
> > > > * Command-line option support provided only for portmask.
> > > >
> > > > v5 change:
> > > > * Handled gracefull shutdown of rx and tx threads upon SIGINT.
> > > >
> > > > v6 change:
> > > > * modified graceful shutdown logic to handle all threads upon SIGINT
> > > > * removed call to rte_eal_pci_probe()
> > > > * added seperate print_stats function
> > > >
> > > > v7 change:
> > > > * passing NULL as rxconf/txconf parameter for rx/tx queue setup
> > > > * removed zero-ed fields from port conf structure
> > > > * fixed style related comments
> > > >
> > > >
> > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > > > Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
> > >
> > > Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
> > 
> > Before applying this patch, I have 2 comments:
> > - Other examples directories don't have _app suffix.
> > - checkpatch reports "switch and case should be at the same indent"
> > 
> > If you agree I will fix these 2 minor issues before applying.
> 
> Fine with me. You can proceed.

Applied

Thanks
-- 
Thomas

^ permalink raw reply	[flat|nested] 38+ messages in thread

end of thread, other threads:[~2014-11-16 21:49 UTC | newest]

Thread overview: 38+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-09-16 12:13 [dpdk-dev] [PATCH 0/3] distributor_app: new sample application for distributor library reshmapa
2014-09-16 12:13 ` [dpdk-dev] [PATCH 1/3] distributor_app: new sample app reshmapa
2014-09-16 12:13 ` [dpdk-dev] [PATCH 2/3] distributor_app: code review comments implementation reshmapa
2014-09-16 12:13 ` [dpdk-dev] [PATCH 3/3] distributor_app: removed extra spaces reshmapa
2014-09-23 12:55 ` [dpdk-dev] [PATCH 0/3] distributor_app: new sample application for distributor library Bruce Richardson
2014-09-24 14:16 ` [dpdk-dev] [PATCH v2] distributor_app: new sample app reshmapa
2014-09-26 15:11   ` De Lara Guarch, Pablo
2014-09-26 15:51     ` Ananyev, Konstantin
2014-09-29 12:39       ` Pattan, Reshma
2014-09-29 13:06         ` Ananyev, Konstantin
2014-09-29 13:35           ` De Lara Guarch, Pablo
2014-09-29 14:35             ` Neil Horman
2014-09-30  8:02             ` Pattan, Reshma
2014-09-30  9:21               ` Ananyev, Konstantin
2014-09-30 10:39   ` [dpdk-dev] [PATCH v3] " reshmapa
2014-09-30 11:34     ` Neil Horman
2014-09-30 12:18       ` Bruce Richardson
2014-09-30 13:39         ` Neil Horman
2014-10-01 14:47           ` Pattan, Reshma
2014-10-01 14:56             ` Neil Horman
2014-10-01 15:37               ` Bruce Richardson
2014-10-01 16:07                 ` Neil Horman
2014-10-06 14:16                   ` Pattan, Reshma
2014-10-06 14:44                     ` Neil Horman
2014-10-06 17:34                       ` Pattan, Reshma
2014-10-06 19:02                         ` Neil Horman
2014-10-02  9:04                 ` Ananyev, Konstantin
2014-10-01 13:33     ` [dpdk-dev] [PATCH v4] distributor_app: gracefull shutdown of tx/rx threads on SIGINT reshmapa
2014-10-01 13:46       ` Pattan, Reshma
2014-10-01 13:49       ` Thomas Monjalon
2014-10-01 14:33       ` [dpdk-dev] [PATCH v5] distributor_app: new sample app reshmapa
2014-10-17 13:59         ` [dpdk-dev] [PATCH v6] " Reshma Pattan
2014-11-02 20:08           ` De Lara Guarch, Pablo
2014-11-03 15:49           ` [dpdk-dev] [PATCH v7] " Reshma Pattan
2014-11-03 16:03             ` De Lara Guarch, Pablo
2014-11-13 21:30               ` Thomas Monjalon
2014-11-14  8:44                 ` Pattan, Reshma
2014-11-16 21:59                   ` Thomas Monjalon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).