DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH 00/11] net/vhostpci: A new vhostpci PMD supporting VM2VM scenario
@ 2017-11-30  9:46 Zhiyong Yang
  2017-11-30  9:46 ` [dpdk-dev] [PATCH 01/11] drivers/net: add vhostpci PMD base files Zhiyong Yang
                   ` (12 more replies)
  0 siblings, 13 replies; 26+ messages in thread
From: Zhiyong Yang @ 2017-11-30  9:46 UTC (permalink / raw)
  To: dev, yliu, maxime.coquelin; +Cc: wei.w.wang, jianfeng.tan

Vhostpci PMD is a new type driver working in guest OS which has ability to
drive the vhostpci modern pci device, which is a new virtio device.

The following linking is about vhostpci design:

An initial device design is presented at KVM Forum'16:
http://www.linux-kvm.org/images/5/55/02x07A-Wei_Wang-Design_of-Vhost-pci.pdf
The latest device design and implementation will be posted to the QEMU community soon.

Vhostpci PMD works in pair with virtio-net PMD to achieve point-to-point communication
between VMs. DPDK already has virtio/vhost user PMD pair to implement RX/TX packets
between guest/host scenario. However, for VM2VM use cases, Virtio PMD needs to
transmit pkts from VM1 to host OS firstly by vhost user port, then transmit pkts to
the 2nd VM by virtio PMD port again. Virtio/Vhostpci PMD pair can implement shared
memory to receive/trasmit packets directly between two VMs. Currently, the entire memory
of the virtio-net side VM is shared to the vhost-pci side VM, and mapped via device BAR2,
and the first 4KB area of BAR2 is reserved to store the metadata.

The vhostpci/virtio PMD working processing is the following:

1.VM1 startup with vhostpci device, bind the device to DPDK in the guest1,
launch the DPDK testpmd, then waiting for the remote memory info (the VM2
shares memory, memory regions and vring info).

2.VM2 startup with virtio-net device, bind the virito-net to DPDK in the VM2,
run testpmd using virtio PMD.

3.vhostpci device negotiate virtio message with virtio-net device via socket
as vhost user/virtio-net do that.

4.Vhostpci device gets VM2's memory region and vring info and write the metadata
to VM2's shared memory. 

5.When the metadata is ready to be read by the Vhostpci PMD, the PMD 
will receive a config interrupt with LINK_UP set in the status config.

6.Vhostpci PMD and Virtio PMD can transmit/receive the packets.

How to test?

1. launch VM1 with vhostpci device. 
qemu/x86_64-softmmu/qemu-system-x86_64 -cpu host -M pc -enable-kvm \
-smp 16,threads=1,sockets=1 -m 8G -mem-prealloc -realtime mlock=on \
-object memory-backend-file,id=mem,size=8G,mem-path=/dev/hugepages, \
share=on -numa node,memdev=mem -drive if=virtio,file=/root/vhost-pci/guest1.img,format=raw \
-kernel /opt/guest_kernel -append 'root=/dev/vda1 ro default_hugepagesz=1G hugepagesz=1G \
hugepages=2 console=ttyS0,115200,8n1 3' -netdev tap,id=net1,br=br0,script=/etc/qemu-ifup \
-chardev socket,id=slave1,server,wait=off, path=/opt/vhost-pci-slave1 -device vhost-pci-net-pci, \
chardev=slave1 \
-nographic

2. bind vhostpci device to dpdk using igb_uio. 
startup dpdk 
./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 -- -i

3. launch VM2 with virtio-net device.

qemu/x86_64-softmmu/qemu-system-x86_64 -cpu host -M pc -enable-kvm \
-smp 4,threads=1,sockets=1 -m 8G -mem-prealloc -realtime mlock=on \
-object memory-backend-file,id=mem,size=8G,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -drive if=virtio,file=/root/vhost-pci/guest2.img,format=raw \
-net none -no-hpet -kernel /opt/guest_kernel \
-append 'root=/dev/vda1 ro default_hugepagesz=1G hugepagesz=1G hugepages=2 console=ttyS0,115200,8n1 3' \
-chardev socket,id=sock2,path=/opt/vhost-pci-slave1 \
-netdev type=vhost-user,id=net2,chardev=sock2,vhostforce \
-device virtio-net-pci,mac=52:54:00:00:00:02,netdev=net2 \
-nographic

4.bind virtio-net to dpdk using igb_uio
run dpdk

./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 --socket-mem 512,0 \
-- -i --rxq=1 --txq=1 --nb-cores=1

5. vhostpci PMD run "start"

6. virtio PMD side run "start tx_first"

loopback testing can work.

note: 
1. only support igb_uio for now.
2. vhostpci device is a modern pci device. vhostpci PMD only supports mergable
mode. Virtio device side must be mergable mode.
3. vhostpci PMD supports one queue pair for now.

Zhiyong Yang (11):
  drivers/net: add vhostpci PMD base files
  net/vhostpci: public header files
  net/vhostpci: add debugging log macros
  net/vhostpci: add basic framework
  net/vhostpci: add queue setup
  net/vhostpci: add support for link status change
  net/vhostpci: get remote memory region and vring info
  net/vhostpci: add RX function
  net/vhostpci: add TX function
  net/vhostpci: support RX/TX packets statistics
  net/vhostpci: update release note

 MAINTAINERS                                       |    6 +
 config/common_base                                |    9 +
 config/common_linuxapp                            |    1 +
 doc/guides/rel_notes/release_18_02.rst            |    6 +
 drivers/net/Makefile                              |    1 +
 drivers/net/vhostpci/Makefile                     |   54 +
 drivers/net/vhostpci/rte_pmd_vhostpci_version.map |    3 +
 drivers/net/vhostpci/vhostpci_ethdev.c            | 1521 +++++++++++++++++++++
 drivers/net/vhostpci/vhostpci_ethdev.h            |  176 +++
 drivers/net/vhostpci/vhostpci_logs.h              |   69 +
 drivers/net/vhostpci/vhostpci_net.h               |   74 +
 drivers/net/vhostpci/vhostpci_pci.c               |  334 +++++
 drivers/net/vhostpci/vhostpci_pci.h               |  240 ++++
 mk/rte.app.mk                                     |    1 +
 14 files changed, 2495 insertions(+)
 create mode 100644 drivers/net/vhostpci/Makefile
 create mode 100644 drivers/net/vhostpci/rte_pmd_vhostpci_version.map
 create mode 100644 drivers/net/vhostpci/vhostpci_ethdev.c
 create mode 100644 drivers/net/vhostpci/vhostpci_ethdev.h
 create mode 100644 drivers/net/vhostpci/vhostpci_logs.h
 create mode 100644 drivers/net/vhostpci/vhostpci_net.h
 create mode 100644 drivers/net/vhostpci/vhostpci_pci.c
 create mode 100644 drivers/net/vhostpci/vhostpci_pci.h

-- 
2.13.3

^ permalink raw reply	[flat|nested] 26+ messages in thread

end of thread, other threads:[~2018-01-19  1:56 UTC | newest]

Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-11-30  9:46 [dpdk-dev] [PATCH 00/11] net/vhostpci: A new vhostpci PMD supporting VM2VM scenario Zhiyong Yang
2017-11-30  9:46 ` [dpdk-dev] [PATCH 01/11] drivers/net: add vhostpci PMD base files Zhiyong Yang
2017-11-30  9:46 ` [dpdk-dev] [PATCH 02/11] net/vhostpci: public header files Zhiyong Yang
2017-11-30  9:46 ` [dpdk-dev] [PATCH 03/11] net/vhostpci: add debugging log macros Zhiyong Yang
2017-11-30  9:46 ` [dpdk-dev] [PATCH 04/11] net/vhostpci: add basic framework Zhiyong Yang
2017-11-30  9:46 ` [dpdk-dev] [PATCH 05/11] net/vhostpci: add queue setup Zhiyong Yang
2017-11-30  9:46 ` [dpdk-dev] [PATCH 06/11] net/vhostpci: add support for link status change Zhiyong Yang
2017-11-30  9:46 ` [dpdk-dev] [PATCH 07/11] net/vhostpci: get remote memory region and vring info Zhiyong Yang
2017-11-30  9:46 ` [dpdk-dev] [PATCH 08/11] net/vhostpci: add RX function Zhiyong Yang
2017-11-30  9:46 ` [dpdk-dev] [PATCH 09/11] net/vhostpci: add TX function Zhiyong Yang
2017-11-30  9:46 ` [dpdk-dev] [PATCH 10/11] net/vhostpci: support RX/TX packets statistics Zhiyong Yang
2017-11-30  9:46 ` [dpdk-dev] [PATCH 11/11] net/vhostpci: update release note Zhiyong Yang
2017-12-05  6:59 ` [dpdk-dev] [PATCH 00/11] net/vhostpci: A new vhostpci PMD supporting VM2VM scenario Yang, Zhiyong
2017-12-05 14:08   ` Yuanhan Liu
2017-12-06  3:00     ` Wei Wang
2017-12-07  6:07   ` Yang, Zhiyong
2017-12-19 11:14 ` Maxime Coquelin
2017-12-20  1:51   ` Yang, Zhiyong
2017-12-21  5:52     ` Tan, Jianfeng
2017-12-21  6:21       ` Yang, Zhiyong
2017-12-21  6:26         ` Yang, Zhiyong
2017-12-21  8:26           ` Maxime Coquelin
2017-12-21  8:40             ` Yang, Zhiyong
2018-01-11 11:13   ` Yang, Zhiyong
2018-01-18  9:04     ` Maxime Coquelin
2018-01-19  1:56       ` Yang, Zhiyong

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).