From: "Xuanziyang (William, Chip Application Design Logic and Hardware Development Dept IT_Products & Solutions)" <xuanziyang2@huawei.com>
To: Ferruh Yigit <ferruh.yigit@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Wangxiaoyun (Cloud,
Network Chip Application Development Dept)"
<cloud.wangxiaoyun@huawei.com>,
zhouguoyang <zhouguoyang@huawei.com>,
"Shahar Belkar" <shahar.belkar@huawei.com>,
Luoxianjun <luoxianjun@huawei.com>,
"Tanya Brokhman" <tanya.brokhman@huawei.com>
Subject: Re: [dpdk-dev] [PATCH v5 00/15] A new net PMD - hinic
Date: Wed, 26 Jun 2019 14:42:54 +0000 [thread overview]
Message-ID: <EA3B33EA29B44042A5337C4DC59AF4505EEF762C@dggeml512-mbx.china.huawei.com> (raw)
> On 6/19/2019 4:45 PM, Ziyang Xuan wrote:
> > This patch set adds support of a new net PMD for Huawei Intelligent
> > nic. This patch provides supoort for basic RX/TX and the contorl path
> > needed for it.
> > Later on new features will be added like VLAN, VFs, etc.
> >
> > Basic features:
> > 1. Basic device operations: probe, initialization, start/stop,
> > configure, info get.
> > 2. RX/TX queue operations: setup/release, start/stop.
> > 3. RX/TX.
> >
> > Stats:
> > 1. statistics and extended statistics.
> >
> > ---
> > v2:
> > - Fix arm64 compilation issue.
> > - Fix some checkpatch checks issues
> > - Fix patches thread issue.
> > - Fit to the newest rte_ prefix patch
> >
> > v3:
> > - Remove Rami from hinic pmd maintainers
> > - Remove hinic_logs.* files and move log codes to other files
> > - Remove the C++ guards within hinic pmd codes
> > - Remove variable related errors shields from compilation files
> > - Use lib link statu related functions but selfdefined
> > - Fix x86_64-native-linuxapp-clang compilation errors
> > - Fix i686-native-linuxapp-gcc compilation errors
> >
> > v4:
> > - Update doc hinic.ini and hinic.rst
> > - Remove x86-32, i686, BSD, Power8, ARMv7 compilations
> > - Fit to newest IPV4 and IPV6 uppercase
> >
> > v5:
> > - Update doc hinic.rst and release_19_08.rst
> > - Delete unused codes
> > - Optimize arch of codes and delete unnecessary files
> > - Remove rte_panic
> > - Subdivided patches
> >
> > Ziyang Xuan (15):
> > net/hinic/base: add HW registers definition
> > net/hinic/base: add HW interfaces of bar operation
> > net/hinic/base: add api command channel code
> > net/hinic/base: add support for cmdq mechanism
> > net/hinic/base: add eq mechanism function code
> > net/hinic/base: add mgmt module function code
> > net/hinic/base: add code about hardware operation
> > net/hinic/base: add nic business configurations
> > net/hinic/base: add context and work queue support
> > net/hinic: add various headers
> > net/hinic: add hinic PMD build and doc files
> > net/hinic: add device initailization
> > net/hinic: add start stop close queue ops
> > net/hinic: add tx/rx package burst
> > net/hinic: add rss stats promisc ops
>
> Hi Ziyang,
>
> I put a few minor comments on patches, other than those looks good.
>
> Also can you please run "./devtools/check-git-log.sh", I think it will give some
> warnings on commit log syntax, can you please check them?
>
> Thanks,
> ferruh
Hi Feruh,
Before sending the patches, I always run the " ./devtools/checkpatches.sh "
and "./devtools/check-git-log.sh" to check the patches. There are not errors/warnings.
The following is the result of "./devtools/check-git-log.sh" checking:
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0000-cover-letter.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0001-net-hinic-base-add-HW-registers-definition.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0002-net-hinic-base-add-HW-interfaces-of-bar-operation.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0003-net-hinic-base-add-api-command-channel-code.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0004-net-hinic-base-add-support-for-cmdq-mechanism.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0005-net-hinic-base-add-eq-mechanism-function-code.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0006-net-hinic-base-add-mgmt-module-function-code.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0007-net-hinic-base-add-code-about-hardware-operation.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0008-net-hinic-base-add-nic-business-configurations.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0009-net-hinic-base-add-context-and-work-queue-support.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0010-net-hinic-add-various-headers.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0011-net-hinic-add-hinic-PMD-build-and-doc-files.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0012-net-hinic-add-device-initailization.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0013-net-hinic-add-start-stop-close-queue-ops.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0014-net-hinic-add-tx-rx-package-burst.patch
root@tester_149:/home/william_xuan/patch/dpdk-next-net#./devtools/check-git-log.sh v5-0015-net-hinic-add-rss-stats-promisc-ops.patch
Best Regards,
Ziyang Xuan
next reply other threads:[~2019-06-26 14:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-26 14:42 Xuanziyang (William, Chip Application Design Logic and Hardware Development Dept IT_Products & Solutions) [this message]
2019-06-26 16:48 ` Ferruh Yigit
-- strict thread matches above, loose matches on Subject: below --
2019-06-19 15:45 Ziyang Xuan
2019-06-26 11:56 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=EA3B33EA29B44042A5337C4DC59AF4505EEF762C@dggeml512-mbx.china.huawei.com \
--to=xuanziyang2@huawei.com \
--cc=cloud.wangxiaoyun@huawei.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=luoxianjun@huawei.com \
--cc=shahar.belkar@huawei.com \
--cc=tanya.brokhman@huawei.com \
--cc=zhouguoyang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).