DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Jiajia, SunX" <sunx.jiajia@intel.com>
To: "Doherty, Declan" <declan.doherty@intel.com>,
	"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v6 0/8] link bonding
Date: Fri, 21 Nov 2014 08:59:28 +0000
Message-ID: <F21F274FCF2C0948830A3ED003452977225256@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <1415362978-6306-1-git-send-email-declan.doherty@intel.com>

Tested-by: Jiajia, SunX <sunx.jiajia@intel.com>
- Tested Commit: f7aaae2fe6f7f9a78eab7313d77e92b934693b5d
- OS: Fedora20 3.11.10-301.fc20.x86_64 and 3.16.6-200.fc20.x86_64
- GCC: gcc version 4.8.2
- CPU: Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
- NIC: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection [8086:10fb]
- Default x86_64-native-linuxapp-gcc configuration
- Total 18 cases, 18 passed, 0 failed

TOPO:
* Connections ports between tester/ixia and DUT
  - TESTER(Or IXIA)-------DUT
  - portA------------------port0
  - portB------------------port1
  - portC------------------port2
  - portD------------------port3
* Connections ports between tester/ixia and switch and DUT
  - TESTER(Or IXIA)-------SWITCH
  -                       SWITCH---------DUT
  - TESTER(Or IXIA)----------------------DUT
  - portA------------------switch
  -                        switch----------port0
  -                        switch----------port1
  -                        switch----------port2
  - portB----------------------------------port3


Test Setup#1 for Functional test
================================

Tester has 4 ports(portA--portD), and DUT has 4 ports(port0--port3), then connect portA to port0, portB to port1, portC to port2, portD to port3. 


Test Setup#2 for Functional test
================================

Tester has 2 ports(portA--portB), DUT has 4 ports(port0--port3), and a switch that supports IEEE 802.3ad Dynamic link aggregation, then connect port0-port2 to the switch for dynamic link aggregation, connect portA to aggregated interface on the switch, connect portB to port3.


- Case: Basic bonding--Create bonded devices and slaves
  Description: 
		Use Setup#1.
		Create bonded device and add some ports as salve of bonded device,
            Then removed slaves or added slaves or change the bonding primary slave
            Or change bonding mode and so on.
  Expected test result:
            Verify the basic functions are normal.

- Case: Basic bonding--MAC Address Test
  Description: 
		Use Setup#1.
		Create bonded device and add some ports as slaves of bonded device,
            Check that the changes of  the bonded device and slave MAC
  Expected test result:
            Verify the behavior of bonded device and slave according to the mode.

- Case: Basic bonding--Device Promiscuous Mode Test
  Description: 
		Use Setup#1.
		Create bonded device and add some ports as slaves of bonded device,
            Set promiscuous mode on or off, then send packets to the bonded device
            Or slaves.
  Expected test result:
            Verify the RX/TX status of bonded device and slaves according to the mode.

- Case: Mode 0(Round Robin) TX/RX test
  Description: 
		Use Setup#1.
		Create bonded device with mode 0 and add 3 ports as slaves of bonded device,
            Forward packets between bonded device and unbounded device, start to forward,
            And send packets to unbound device or slaves.
  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 0.

- Case: Mode 0(Round Robin) Bring one slave link down
  Description: 
		Use Setup#1.
		Create bonded device with mode 0 and add 3 ports as slaves of bonded device,
            Forward packets between bonded device and unbounded device, start to forward,
            Bring the link on either port 0, 1 or 2 down. And send packets to unbound 
            device or slaves.
  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 0.

- Case: Mode 0(Round Robin) Bring all slave links down
  Description: 
		Use Setup#1.
		Create bonded device with mode 0 and add 3 ports as slaves of bonded device,
            Forward packets between bonded device and unbounded device, start to forward,
            Bring the links down on all bonded ports. And send packets to unbound 
            device or slaves.
  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 0.

- Case: Mode 1(Active Backup) TX/RX Test
  Description: 
		Use Setup#1.
		Create bonded device with mode 1 and add 3 ports as slaves of bonded device,
            Forward packets between bonded device and unbounded device, start to forward,
            And send packets to unbound device or slaves.
  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 1.

- Case: Mode 1(Active Backup) Change active slave, RX/TX test
  Description: 
		Use Setup#1.
		Continuing from previous test case.Change the active slave port from port0 
            to port1.Verify that the bonded device's MAC has changed to slave1's MAC.

            testpmd> set bonding primary 1 4 

           Repeat the transmission and reception(TX/RX) test verify that data is now 
           transmitted and received through the new active slave and no longer through
           port0
  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 1.

- Case: Mode 1(Active Backup) Link up/down active eth dev
  Description: 
		Use Setup#1.

           Bring link between port A and port0 down. If tester is ixia, can use 
           IxExplorer to set the "Simulate Cable Disconnect" at the port property.  
           Verify that the active slave has been changed from port0. Repeat the 
           transmission and reception test verify that data is now transmitted and
           received through the new active slave and no longer through port0

           Bring port0 to link down at the remote end.Verify the active slave has been changed from port0.
           send 100 packets to port3.

           testpmd> show port stats 4----(Verify port3 have 100 rx packets,meanwhile
          port4 have 100 tx packets,the current primary port have 100 tx packets,and port0
          doesn`t have any packet)
  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 1. 

- Case: Mode 1(Active Backup) Bring all slave links down
  Description: 
		Use Setup#1.
            Bring all slave ports of bonded port down.
            Verify that bonded callback for link down is called and no active slaves. 
            Verify that data cannot be sent or received through bonded port. Send 100 packets 
            to port3 and verify that bonded port can't TX 100 packets.

            Bring port 0-2 to link down at the remote end. Verify port4 has been link down and has no active slave.
            Send 100 rx packets to port3. 

         testpmd> show port stats 4----(Verify port3 have 100 rx packets,meanwhile 
                                        port4 doesn`t have any packet)
  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 1.

- Case: Mode 2(Balance XOR) TX Load Balance test
  Description: 
		Use Setup#1.
            Bonded port will activate each slave eth dev based on the following hash function:

             ((dst_mac XOR src_mac) % (number of slave ports))

            Send 300 packets from IXIA port D to non-bonded port(port3),and verify these packets 
            will be forwarded to bonded device. The bonded device will transimit these packets to all slaves.
            Verify that each slave receive correct number of packets according to the policy. The total number
            of packets which received by slave should be equal as 300 packets. 

            Create 3 streams in the IXIA,which streams source MAC are 00:00:03:00:0F:00,
            00:00:03:00:0F:01,00:00:03:00:0F:02 respectively (make sure generate different value by
            the policy ((dst_mac XOR src_mac) % (number of slave ports)) ) and dest MAC all is 
            90:E2:BA:4A:54:80(this value should been your unbonded port address). Respectively
            send 100 packets to port3 by the 3 streams.

            testpmd> show port stats all----(Verify port3 have 300 rx packets,
            port4 have 300 tx packets,and port 0-2 have 100 tx packets respectively)

  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 2.

- Case: Mode 2(Balance XOR) TX Load Balance Link down
  Description: 
		Use Setup#1.
		ring link down of one slave.
            Send 300 packets from non-bonded port(port3), and verify these 
		packets will be forwarded to bonded device. 
            Verify that each active slave receive correct number of packets
            (according to the mode policy), and the down slave will not receive packets.
		Link down slave 0 at the remote end.Create 3 streams in the IXIA like case13.
		Then respectively send 100 packets to port3 by the 3 streams.

  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 2.

- Case: Mode 2(Balance XOR) Bring all slave links down
  Description: 
		Use Setup#1.
		Bring all slave links down.
		Verify that bonded callback for link down is called.
		Verify no packet can be sent.

		Bring all slaves to link down at the remote end.Create 
		3 streams in the IXIA like case13.Then respectively send 100 packets 
		to port3 by the 3 streams.

		testpmd> show port info 4----(Verify bonding port has been linked down)
   	      testpmd> show port stats all----(Verify port3 have 300 rx packets,meanwhile
							 port 0,1,2 and 4 don`t have any packet)
  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 2.


- Case: Mode 2(Balance XOR) Layer 3+4 forwarding 	
  Description: 
		Use Setup#1.
		Use "xmit_hash_policy()" to change to this forwarding mode
		Create a stream of traffic which will exercise all slave ports using the transmit policy 

   		 ((SRC_PORT XOR DST_PORT) XOR ((SRC_IP XOR DST_IP) AND 0xffff) % # of Slaves

		Transmit data through bonded device, verify TX packet count for each slave port is as expected

		Create 3 streams on a port which is mapped with unbonded port 3 at the IXIA end.
	      And set different IP by the transmit policy.Then send 100 packets on each stream.

           testpmd> show port stats all----(Verify port3 have 300 rx packets,
				meanwhile port4 have 300 rx packets, port 0-2 have 100 tx packets respectively)

		Add Vlan tag in the previouse 3 streams. Everthing else remains the same. 
		Then send 100 packets on each stream. Verify the packet statics is the same as above.  

   	      testpmd> show port stats all----(Verify port3  
		have 300 rx packets,meanwhile port4 have 300 rx packets,port 0-2 have 100 tx packets respecitvely)
  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 2.

- Case: Mode 2(Balance XOR) RX test
  Description: 
		Use Setup#1.
		Send 100 packets to each bonded slaves(port0,1,2)
		Verify that each slave receives 100 packets and the bonded device receive a total 300 packets.
		Verify that the bonded device forwards 300 packets to the non-bonded port(port4).

		Send 100 packets to port0,1,2 respectively.

    		testpmd> show port stats all----(Verify port0,1,2 have 100 tx packets respectively 
				and port4 have 300 rx packets,and port3 have 300 tx packets)

  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 2.

- Case: Mode 3(Broadcast) TX/RX Test
  Description: 
		Use Setup#1.
		Add ports 0-2 as slave devices to the bonded port 4. Make all slaves
	      to be active slaves on bonded device. 

            RX: Send a packet stream(100 packets) from port A on the traffic
		    generator to be forwarded through the bonded port4 to port3.
		    Verify the sum of the packets transmitted from the traffic generator
		    portA is equal the total received packets on port0, port4 and portD(Traffic generator).

               testpmd> show port stats all---(Verify port0 receive 100 packets, 
				and port4 receive 100 packets, and port3 transmit 100 packets)

           TX: Send a packet stream(100 packets) from portD on the traffic generator 
               to be forwarded through port3 to the bonded port4. Verify the sum of 
               the packets(100packets) transmitted from the traffic generator port is equal the total 
               received packets on port4, portA and transmitted to port0.
    
          testpmd> show port stats all---(Verify port3 RX 100 packets, 
                    and port0,1,2 TX 100 packets,port4 has 300 TX packets)
  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 3.


- Case: Mode 3(Broadcast) Bring one slave link down
  Description: 
		Use Setup#1.
		Bring one slave port link down. Send 100 packets through portD to port3,
	      then port3 forwards to bondede device(port4), verify that the bonded device 
		and other slaves TX the correct number of packets(100 packets for each port).
  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 3.

- Case: Mode 3(Broadcast) Bring all slave links down
  Description: 
		Use Setup#1.
		Bring all slave ports of bonded port down
		Verify that bonded callback for link down is called
		Verify that data cannot be sent or received through bonded port.
  Expected test result:
            Verify the RX/TX status of bonded device and slaves in mode 3.

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Declan Doherty
> Sent: Friday, November 07, 2014 8:23 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v6 0/8] link bonding
> 
> v6:
> - Re-based to dpdk.org addressing associated issues for MBUF_REFCNT
> - Added details to testpmd user guide for new command to set link
> status polling interval.
> 
> v5:
> - Fix uninitialized variable in broadcast_tx_burst function which
> caused a
>   build error in 32-bit build
> - Address unit test issue which is exposed by new test in mode 4/5
> patch sets
> 
> v4:
> - Rebased to account for changes in master.
> - Fix for rte_eth_bond_slaves_get() introduced in v3 patch set
> - Addressed issue around disabling/enabling link status polling around
> adding/
>   removing slaves devices.
> 
> v3 :
> - Typo fix for the bond free mbufs patch.
> - Rebased to account for changes in the mbuf patches.
> - Add support for slave devices which don't support link status
> interrupts
> - Tidy up the link bonding unit test so that all tests use the new test
> macros.
> 
> v2 :
> Addresses issues with the logic around the handling of fail
> transmissions.
> In this version all modes behave in a manner similar to a standard PMD,
> returning the number of successfully transmitted mbufs and with the
> failing
> mbufs at the end of bufs array for freeing / retransmission by the
> application software
> 
> v1:
> 
> This patch set adds support for link status interrupt in the link
> bonding
> pmd. It also contains some patches to tidy up the code structure and to
> of the link bonding code and to fix bugs relating to transmission
> failures in the under lying slave pmd which could lead to leaked mbufs.
> 
> 
> Declan Doherty (8):
>   bond: link status interrupt support
>   bond: removing switch statement from rx burst method
>   bond: fix naming inconsistency in tx_burst_round_robin
>   bond: free mbufs if transmission fails in bonding tx_burst functions
>   test app: adding support for generating variable sized packet
>   testpmd: adding parameter to reconfig method to set socket_id when
>     adding new port to portlist
>   bond: lsc polling support
>   bond: unit test test macro refactor
> 
>  app/test-pmd/cmdline.c                      |   65 +-
>  app/test-pmd/testpmd.c                      |    3 +-
>  app/test-pmd/testpmd.h                      |    2 +-
>  app/test/packet_burst_generator.c           |   25 +-
>  app/test/packet_burst_generator.h           |    6 +-
>  app/test/test.h                             |    7 +-
>  app/test/test_link_bonding.c                | 3347 ++++++++++++++-----
> --------
>  app/test/virtual_pmd.c                      |   96 +-
>  app/test/virtual_pmd.h                      |   53 +-
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |   19 +
>  lib/librte_pmd_bond/rte_eth_bond.h          |   80 +
>  lib/librte_pmd_bond/rte_eth_bond_api.c      |  319 ++-
>  lib/librte_pmd_bond/rte_eth_bond_args.c     |   28 +-
>  lib/librte_pmd_bond/rte_eth_bond_pmd.c      |  553 +++--
>  lib/librte_pmd_bond/rte_eth_bond_private.h  |   71 +-
>  15 files changed, 2715 insertions(+), 1959 deletions(-)
> 
> --
> 1.7.12.2

  parent reply	other threads:[~2014-11-21  8:48 UTC|newest]

Thread overview: 91+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-19 13:51 [dpdk-dev] [PATCH 0/6] " Declan Doherty
2014-08-19 13:51 ` [dpdk-dev] [PATCH 1/6] bond: link status interrupt support Declan Doherty
2014-08-20 20:24   ` Sanford, Robert
2014-08-19 13:51 ` [dpdk-dev] [PATCH 2/6] bond: removing switch statement from rx burst method Declan Doherty
2014-08-20 20:25   ` Sanford, Robert
2014-08-19 13:51 ` [dpdk-dev] [PATCH 3/6] bond: fix naming inconsistency in tx_burst_round_robin Declan Doherty
2014-08-20 20:25   ` Sanford, Robert
2014-08-19 13:51 ` [dpdk-dev] [PATCH 4/6] bond: free mbufs if transmission fails in bonding tx_burst functions Declan Doherty
2014-08-19 13:51 ` [dpdk-dev] [PATCH 5/6] test app: adding support for generating variable sized packets Declan Doherty
2014-08-19 13:51 ` [dpdk-dev] [PATCH 6/6] testpmd: adding parameter to reconfig method to set socket_id when adding new port to portlist Declan Doherty
2014-08-22  7:41 ` [dpdk-dev] [PATCH 0/6] link bonding Jiajia, SunX
2014-09-01  8:31 ` [dpdk-dev] [PATCH v2 " Declan Doherty
2014-09-02 13:31   ` De Lara Guarch, Pablo
2014-09-02 18:15   ` Stephen Hemminger
2014-09-01  8:31 ` [dpdk-dev] [PATCH v2 1/6] bond: link status interrupt support Declan Doherty
2014-09-01  8:31 ` [dpdk-dev] [PATCH v2 2/6] bond: removing switch statement from rx burst method Declan Doherty
2014-09-01  8:31 ` [dpdk-dev] [PATCH v2 3/6] bond: fix naming inconsistency in tx_burst_round_robin Declan Doherty
2014-09-01  8:31 ` [dpdk-dev] [PATCH v2 4/6] bond: free mbufs if transmission fails in bonding tx_burst functions Declan Doherty
2014-09-02  9:22   ` Doherty, Declan
2014-09-02  9:31     ` Thomas Monjalon
2014-09-23 13:18   ` [dpdk-dev] [PATCH v3 0/5] link bonding Declan Doherty
2014-09-23 13:18     ` [dpdk-dev] [PATCH v3 1/5] bond: free mbufs if transmission fails in bonding tx_burst functions Declan Doherty
2014-09-23 13:18     ` [dpdk-dev] [PATCH v3 2/5] test app: adding support for generating variable sized packet Declan Doherty
2014-09-23 13:18     ` [dpdk-dev] [PATCH v3 3/5] testpmd: adding parameter to reconfig method to set socket_id when adding new port to portlist Declan Doherty
2014-09-23 13:18     ` [dpdk-dev] [PATCH v3 4/5] bond: lsc polling support Declan Doherty
2014-09-24 13:16       ` Ananyev, Konstantin
2014-09-23 13:18     ` [dpdk-dev] [PATCH v3 5/5] bond: unit test test macro refactor Declan Doherty
2014-09-01  8:31 ` [dpdk-dev] [PATCH v2 5/6] test app: adding support for generating variable sized packets Declan Doherty
2014-09-01  8:31 ` [dpdk-dev] [PATCH v2 6/6] testpmd: adding parameter to reconfig method to set socket_id when adding new port to portlist Declan Doherty
2014-09-30  9:57 ` [dpdk-dev] [PATCH v4 0/8] link bonding Declan Doherty
2014-09-30  9:57   ` [dpdk-dev] [PATCH v4 1/8] bond: link status interrupt support Declan Doherty
2014-09-30  9:57   ` [dpdk-dev] [PATCH v4 2/8] bond: removing switch statement from rx burst method Declan Doherty
2014-09-30  9:57   ` [dpdk-dev] [PATCH v4 3/8] bond: fix naming inconsistency in tx_burst_round_robin Declan Doherty
2014-09-30  9:57   ` [dpdk-dev] [PATCH v4 4/8] bond: free mbufs if transmission fails in bonding tx_burst functions Declan Doherty
2014-10-13 15:29     ` De Lara Guarch, Pablo
2014-09-30  9:57   ` [dpdk-dev] [PATCH v4 5/8] test app: adding support for generating variable sized packet bursts Declan Doherty
2014-10-24  3:22     ` Liang, Cunming
2014-09-30  9:57   ` [dpdk-dev] [PATCH v4 6/8] testpmd: adding parameter to reconfig method to set socket_id when adding new port to portlist Declan Doherty
2014-09-30  9:57   ` [dpdk-dev] [PATCH v4 7/8] bond: lsc polling support Declan Doherty
2014-09-30  9:57   ` [dpdk-dev] [PATCH v4 8/8] bond: unit test test macro refactor Declan Doherty
2014-10-08  8:49   ` [dpdk-dev] [PATCH v4 0/8] link bonding Jiajia, SunX
2014-10-09 19:20   ` De Lara Guarch, Pablo
2014-10-14 12:59   ` [dpdk-dev] [PATCH v5 " Declan Doherty
2014-10-14 12:59     ` [dpdk-dev] [PATCH v5 1/8] bond: link status interrupt support Declan Doherty
2014-10-14 12:59     ` [dpdk-dev] [PATCH v5 2/8] bond: removing switch statement from rx burst method Declan Doherty
2014-10-14 12:59     ` [dpdk-dev] [PATCH v5 3/8] bond: fix naming inconsistency in tx_burst_round_robin Declan Doherty
2014-10-14 12:59     ` [dpdk-dev] [PATCH v5 4/8] bond: free mbufs if transmission fails in bonding tx_burst functions Declan Doherty
2014-10-14 12:59     ` [dpdk-dev] [PATCH v5 5/8] test app: adding support for generating variable sized packet Declan Doherty
2014-10-14 12:59     ` [dpdk-dev] [PATCH v5 6/8] testpmd: adding parameter to reconfig method to set socket_id when adding new port to portlist Declan Doherty
2014-10-14 12:59     ` [dpdk-dev] [PATCH v5 7/8] bond: lsc polling support Declan Doherty
2014-10-14 12:59     ` [dpdk-dev] [PATCH v5 8/8] bond: unit test test macro refactor Declan Doherty
2014-10-14 15:59     ` [dpdk-dev] [PATCH v5 0/8] link bonding De Lara Guarch, Pablo
2014-11-05  3:10     ` Jiajia, SunX
2014-11-07 12:22     ` [dpdk-dev] [PATCH v6 " Declan Doherty
2014-11-07 12:22       ` [dpdk-dev] [PATCH v6 1/8] bond: link status interrupt support Declan Doherty
2014-11-07 12:22       ` [dpdk-dev] [PATCH v6 2/8] bond: removing switch statement from rx burst method Declan Doherty
2014-11-07 12:22       ` [dpdk-dev] [PATCH v6 3/8] bond: fix naming inconsistency in tx_burst_round_robin Declan Doherty
2014-11-07 12:22       ` [dpdk-dev] [PATCH v6 4/8] bond: free mbufs if transmission fails in bonding tx_burst functions Declan Doherty
2014-11-07 12:22       ` [dpdk-dev] [PATCH v6 5/8] test app: adding support for generating variable sized packet Declan Doherty
2014-11-07 12:22       ` [dpdk-dev] [PATCH v6 6/8] testpmd: adding parameter to reconfig method to set socket_id when adding new port to portlist Declan Doherty
2014-11-07 12:22       ` [dpdk-dev] [PATCH v6 7/8] bond: lsc polling support Declan Doherty
2014-11-07 12:22       ` [dpdk-dev] [PATCH v6 8/8] bond: unit test test macro refactor Declan Doherty
2014-11-07 16:40       ` [dpdk-dev] [PATCH v6 0/8] link bonding De Lara Guarch, Pablo
2014-11-21 17:07         ` Doherty, Declan
2014-11-21 18:36           ` Thomas Monjalon
2014-11-23 13:40             ` Thomas Monjalon
2014-11-21  8:59       ` Jiajia, SunX [this message]
2014-11-24 12:27       ` [dpdk-dev] [PATCH v7 0/7] " Declan Doherty
2014-11-24 12:27         ` [dpdk-dev] [PATCH v7 1/7] bond: link status interrupt support Declan Doherty
2014-11-24 12:27         ` [dpdk-dev] [PATCH v7 2/7] bond: removing switch statement from rx burst method Declan Doherty
2014-11-24 12:27         ` [dpdk-dev] [PATCH v7 3/7] bond: fix naming inconsistency in tx_burst_round_robin Declan Doherty
2014-11-24 12:27         ` [dpdk-dev] [PATCH v7 4/7] bond: free mbufs if transmission fails in bonding tx_burst functions Declan Doherty
2014-11-24 12:27         ` [dpdk-dev] [PATCH v7 5/7] testpmd: adding parameter to reconfig method to set socket_id when adding new port to portlist Declan Doherty
2014-11-24 12:27         ` [dpdk-dev] [PATCH v7 6/7] bond: lsc polling support Declan Doherty
2014-11-24 12:27         ` [dpdk-dev] [PATCH v7 7/7] bond: unit test test macro refactor Declan Doherty
2014-11-24 15:35         ` [dpdk-dev] [PATCH v7 0/7] link bonding Thomas Monjalon
2014-11-24 16:24           ` Doherty, Declan
2014-11-24 17:53             ` Thomas Monjalon
2014-11-24 16:33         ` [dpdk-dev] [PATCH v8 " Declan Doherty
2014-11-24 16:33           ` [dpdk-dev] [PATCH v8 1/7] bond: link status interrupt support Declan Doherty
2014-11-24 16:33           ` [dpdk-dev] [PATCH v8 2/7] bond: removing switch statement from rx burst method Declan Doherty
2014-11-24 16:33           ` [dpdk-dev] [PATCH v8 3/7] bond: fix naming inconsistency in tx_burst_round_robin Declan Doherty
2014-11-24 16:33           ` [dpdk-dev] [PATCH v8 4/7] bond: free mbufs if transmission fails in bonding tx_burst functions Declan Doherty
2014-11-24 16:33           ` [dpdk-dev] [PATCH v8 5/7] testpmd: adding parameter to reconfig method to set socket_id when adding new port to portlist Declan Doherty
2014-11-24 16:33           ` [dpdk-dev] [PATCH v8 6/7] bond: lsc polling support Declan Doherty
2014-11-24 16:33           ` [dpdk-dev] [PATCH v8 7/7] bond: unit test test macro refactor Declan Doherty
2014-11-24 18:32           ` [dpdk-dev] [PATCH v8 0/7] link bonding Thomas Monjalon
2014-11-24 18:51             ` Thomas Monjalon
2014-11-24 20:54           ` Thomas Monjalon
2014-11-25 10:56             ` Jastrzebski, MichalX K
2014-11-25 11:20               ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=F21F274FCF2C0948830A3ED003452977225256@SHSMSX104.ccr.corp.intel.com \
    --to=sunx.jiajia@intel.com \
    --cc=declan.doherty@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git