From: "Zhang, Helin" <helin.zhang@intel.com>
To: Shelton Chia <jiaxt@sinogrid.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] kni: fix igb and ixgbe kni ethtool get_link op
Date: Mon, 4 May 2015 08:55:49 +0000 [thread overview]
Message-ID: <F35DEAC7BCE34641BA9FAC6BCA4A12E70A8587B1@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <1428074329-20469-1-git-send-email-jiaxt@sinogrid.com>
Hi Chia
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Shelton Chia
> Sent: Friday, April 3, 2015 11:19 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH] kni: fix igb and ixgbe kni ethtool get_link op
>
> igb and ixgbe's link detected always return yes, fix get_link func refer to
> get_settings, it works correctly for my i350 and 82599es nic.
Could you help to add more detailed description of why we need these code changes? Thanks!
>
> Signed-off-by: Shelton Chia <jiaxt@sinogrid.com>
> ---
> .../linuxapp/kni/ethtool/igb/igb_ethtool.c | 18 ++++++---------
> .../linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c | 26
> +++++++++++++++++++++-
> 2 files changed, 32 insertions(+), 12 deletions(-)
>
> diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_ethtool.c
> b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_ethtool.c
> index f3c48b2..5457f48 100644
> --- a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_ethtool.c
> +++ b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_ethtool.c
> @@ -383,19 +383,15 @@ static int igb_set_settings(struct net_device
> *netdev, struct ethtool_cmd *ecmd) static u32 igb_get_link(struct
> net_device *netdev) {
> struct igb_adapter *adapter = netdev_priv(netdev);
> - struct e1000_mac_info *mac = &adapter->hw.mac;
> + struct e1000_hw *hw = &adapter->hw;
> + u32 status;
>
> - /*
> - * If the link is not reported up to netdev, interrupts are disabled,
> - * and so the physical link state may have changed since we last
> - * looked. Set get_link_status to make sure that the true link
> - * state is interrogated, rather than pulling a cached and possibly
> - * stale link state from the driver.
> - */
> - if (!netif_carrier_ok(netdev))
> - mac->get_link_status = 1;
> + status = E1000_READ_REG(hw, E1000_STATUS);
Can ' check_for_link ' be used for checking the link here? It needs to support
all possible link types.
>
> - return igb_has_link(adapter);
> + if (status & E1000_STATUS_LU)
> + return 1;
> + else
> + return 0;
> }
>
> static void igb_get_pauseparam(struct net_device *netdev, diff --git
> a/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c
> b/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c
> index 11472bd..184b14f 100644
> --- a/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c
> +++ b/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c
> @@ -801,6 +801,30 @@ static void ixgbe_get_regs(struct net_device *netdev,
> struct ethtool_regs *regs,
> regs_buff[1128] = IXGBE_READ_REG(hw, IXGBE_MFLCN); }
>
> +static u32 ixgbe_get_link(struct net_device *netdev) {
> + struct ixgbe_adapter *adapter = netdev_priv(netdev);
> + struct ixgbe_hw *hw = &adapter->hw;
> + u32 link_speed = 0;
> + bool link_up;
> +
> + if (!in_interrupt()) {
> + hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
As done in kernel driver function ' ixgbe_watchdog_update_link ()', more checks
may be needed.
Regards,
Helin
> + } else {
> + /*
> + * this case is a special workaround for RHEL5 bonding
> + * that calls this routine from interrupt context
> + */
> + link_speed = adapter->link_speed;
> + link_up = adapter->link_up;
> + }
> +
> + if (link_up)
> + return 1;
> + else
> + return 0;
> +}
> +
> static int ixgbe_get_eeprom_len(struct net_device *netdev) {
> struct ixgbe_adapter *adapter = netdev_priv(netdev); @@ -2838,7
> +2862,7 @@ struct ethtool_ops ixgbe_ethtool_ops = {
> .get_wol = ixgbe_get_wol,
> .set_wol = ixgbe_set_wol,
> .nway_reset = ixgbe_nway_reset,
> - .get_link = ethtool_op_get_link,
> + .get_link = ixgbe_get_link,
> .get_eeprom_len = ixgbe_get_eeprom_len,
> .get_eeprom = ixgbe_get_eeprom,
> .set_eeprom = ixgbe_set_eeprom,
> --
> 2.3.5
next prev parent reply other threads:[~2015-05-04 8:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-03 15:18 Shelton Chia
2015-04-28 10:12 ` Thomas Monjalon
2015-05-04 8:55 ` Zhang, Helin [this message]
2015-05-10 6:26 ` 贾学涛
2015-06-15 0:56 ` Zhang, Helin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=F35DEAC7BCE34641BA9FAC6BCA4A12E70A8587B1@SHSMSX104.ccr.corp.intel.com \
--to=helin.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=jiaxt@sinogrid.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).