* [dpdk-dev] [PATCH v4 1/5] lib/librte_vhost: mv vhost example to vhost lib directory for further code re-factoring
2014-09-12 10:54 [dpdk-dev] [PATCH v4 0/5] lib/librte_vhost: user space vhost cuse driver library Huawei Xie
@ 2014-09-12 10:55 ` Huawei Xie
2014-09-12 10:55 ` [dpdk-dev] [PATCH v4 2/5] lib/librte_vhost: re-factor vhost lib for subsequent transform Huawei Xie
` (6 subsequent siblings)
7 siblings, 0 replies; 14+ messages in thread
From: Huawei Xie @ 2014-09-12 10:55 UTC (permalink / raw)
To: dev
This commit creates vhost library directory, and copies vhost example into it.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Tommy Long <thomas.long@intel.com>
---
examples/vhost/Makefile | 60 -
examples/vhost/eventfd_link/Makefile | 39 -
examples/vhost/eventfd_link/eventfd_link.c | 205 --
examples/vhost/eventfd_link/eventfd_link.h | 79 -
examples/vhost/libvirt/qemu-wrap.py | 367 ---
examples/vhost/main.c | 3722 --------------------------
examples/vhost/main.h | 86 -
examples/vhost/vhost-net-cdev.c | 367 ---
examples/vhost/vhost-net-cdev.h | 83 -
examples/vhost/virtio-net.c | 1165 --------
examples/vhost/virtio-net.h | 161 --
lib/librte_vhost/Makefile | 60 +
lib/librte_vhost/eventfd_link/Makefile | 39 +
lib/librte_vhost/eventfd_link/eventfd_link.c | 205 ++
lib/librte_vhost/eventfd_link/eventfd_link.h | 79 +
lib/librte_vhost/libvirt/qemu-wrap.py | 367 +++
lib/librte_vhost/main.c | 3722 ++++++++++++++++++++++++++
lib/librte_vhost/main.h | 86 +
lib/librte_vhost/vhost-net-cdev.c | 367 +++
lib/librte_vhost/vhost-net-cdev.h | 83 +
lib/librte_vhost/virtio-net.c | 1165 ++++++++
lib/librte_vhost/virtio-net.h | 161 ++
22 files changed, 6334 insertions(+), 6334 deletions(-)
delete mode 100644 examples/vhost/Makefile
delete mode 100644 examples/vhost/eventfd_link/Makefile
delete mode 100644 examples/vhost/eventfd_link/eventfd_link.c
delete mode 100644 examples/vhost/eventfd_link/eventfd_link.h
delete mode 100755 examples/vhost/libvirt/qemu-wrap.py
delete mode 100644 examples/vhost/main.c
delete mode 100644 examples/vhost/main.h
delete mode 100644 examples/vhost/vhost-net-cdev.c
delete mode 100644 examples/vhost/vhost-net-cdev.h
delete mode 100644 examples/vhost/virtio-net.c
delete mode 100644 examples/vhost/virtio-net.h
create mode 100644 lib/librte_vhost/Makefile
create mode 100644 lib/librte_vhost/eventfd_link/Makefile
create mode 100644 lib/librte_vhost/eventfd_link/eventfd_link.c
create mode 100644 lib/librte_vhost/eventfd_link/eventfd_link.h
create mode 100755 lib/librte_vhost/libvirt/qemu-wrap.py
create mode 100644 lib/librte_vhost/main.c
create mode 100644 lib/librte_vhost/main.h
create mode 100644 lib/librte_vhost/vhost-net-cdev.c
create mode 100644 lib/librte_vhost/vhost-net-cdev.h
create mode 100644 lib/librte_vhost/virtio-net.c
create mode 100644 lib/librte_vhost/virtio-net.h
diff --git a/examples/vhost/Makefile b/examples/vhost/Makefile
deleted file mode 100644
index f45f83f..0000000
--- a/examples/vhost/Makefile
+++ /dev/null
@@ -1,60 +0,0 @@
-# BSD LICENSE
-#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(CONFIG_RTE_EXEC_ENV),"linuxapp")
-$(info This application can only operate in a linuxapp environment, \
-please change the definition of the RTE_TARGET environment variable)
-all:
-else
-
-# binary name
-APP = vhost-switch
-
-# all source are stored in SRCS-y
-#SRCS-y := cusedrv.c loopback-userspace.c
-SRCS-y := main.c virtio-net.c vhost-net-cdev.c
-
-CFLAGS += -O2 -I/usr/local/include -D_FILE_OFFSET_BITS=64 -Wno-unused-parameter
-CFLAGS += $(WERROR_FLAGS)
-LDFLAGS += -lfuse
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
diff --git a/examples/vhost/eventfd_link/Makefile b/examples/vhost/eventfd_link/Makefile
deleted file mode 100644
index fc3927b..0000000
--- a/examples/vhost/eventfd_link/Makefile
+++ /dev/null
@@ -1,39 +0,0 @@
-# BSD LICENSE
-#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-obj-m += eventfd_link.o
-
-
-all:
- make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
-
-clean:
- make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
diff --git a/examples/vhost/eventfd_link/eventfd_link.c b/examples/vhost/eventfd_link/eventfd_link.c
deleted file mode 100644
index fc0653a..0000000
--- a/examples/vhost/eventfd_link/eventfd_link.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*-
- * * GPL LICENSE SUMMARY
- * *
- * * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * *
- * * This program is free software; you can redistribute it and/or modify
- * * it under the terms of version 2 of the GNU General Public License as
- * * published by the Free Software Foundation.
- * *
- * * This program is distributed in the hope that it will be useful, but
- * * WITHOUT ANY WARRANTY; without even the implied warranty of
- * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * * General Public License for more details.
- * *
- * * You should have received a copy of the GNU General Public License
- * * along with this program; if not, write to the Free Software
- * * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * * The full GNU General Public License is included in this distribution
- * * in the file called LICENSE.GPL.
- * *
- * * Contact Information:
- * * Intel Corporation
- * */
-
-#include <linux/eventfd.h>
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/rcupdate.h>
-#include <linux/file.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/mmu_context.h>
-#include <linux/sched.h>
-#include <asm/mmu_context.h>
-#include <linux/fdtable.h>
-
-#include "eventfd_link.h"
-
-
-/*
- * get_files_struct is copied from fs/file.c
- */
-struct files_struct *
-get_files_struct (struct task_struct *task)
-{
- struct files_struct *files;
-
- task_lock (task);
- files = task->files;
- if (files)
- atomic_inc (&files->count);
- task_unlock (task);
-
- return files;
-}
-
-/*
- * put_files_struct is extracted from fs/file.c
- */
-void
-put_files_struct (struct files_struct *files)
-{
- if (atomic_dec_and_test (&files->count))
- {
- BUG ();
- }
-}
-
-
-static long
-eventfd_link_ioctl (struct file *f, unsigned int ioctl, unsigned long arg)
-{
- void __user *argp = (void __user *) arg;
- struct task_struct *task_target = NULL;
- struct file *file;
- struct files_struct *files;
- struct fdtable *fdt;
- struct eventfd_copy eventfd_copy;
-
- switch (ioctl)
- {
- case EVENTFD_COPY:
- if (copy_from_user (&eventfd_copy, argp, sizeof (struct eventfd_copy)))
- return -EFAULT;
-
- /*
- * Find the task struct for the target pid
- */
- task_target =
- pid_task (find_vpid (eventfd_copy.target_pid), PIDTYPE_PID);
- if (task_target == NULL)
- {
- printk (KERN_DEBUG "Failed to get mem ctx for target pid\n");
- return -EFAULT;
- }
-
- files = get_files_struct (current);
- if (files == NULL)
- {
- printk (KERN_DEBUG "Failed to get files struct\n");
- return -EFAULT;
- }
-
- rcu_read_lock ();
- file = fcheck_files (files, eventfd_copy.source_fd);
- if (file)
- {
- if (file->f_mode & FMODE_PATH
- || !atomic_long_inc_not_zero (&file->f_count))
- file = NULL;
- }
- rcu_read_unlock ();
- put_files_struct (files);
-
- if (file == NULL)
- {
- printk (KERN_DEBUG "Failed to get file from source pid\n");
- return 0;
- }
-
- /*
- * Release the existing eventfd in the source process
- */
- spin_lock (&files->file_lock);
- filp_close (file, files);
- fdt = files_fdtable (files);
- fdt->fd[eventfd_copy.source_fd] = NULL;
- spin_unlock (&files->file_lock);
-
- /*
- * Find the file struct associated with the target fd.
- */
-
- files = get_files_struct (task_target);
- if (files == NULL)
- {
- printk (KERN_DEBUG "Failed to get files struct\n");
- return -EFAULT;
- }
-
- rcu_read_lock ();
- file = fcheck_files (files, eventfd_copy.target_fd);
- if (file)
- {
- if (file->f_mode & FMODE_PATH
- || !atomic_long_inc_not_zero (&file->f_count))
- file = NULL;
- }
- rcu_read_unlock ();
- put_files_struct (files);
-
- if (file == NULL)
- {
- printk (KERN_DEBUG "Failed to get file from target pid\n");
- return 0;
- }
-
-
- /*
- * Install the file struct from the target process into the
- * file desciptor of the source process,
- */
-
- fd_install (eventfd_copy.source_fd, file);
-
- return 0;
-
- default:
- return -ENOIOCTLCMD;
- }
-}
-
-static const struct file_operations eventfd_link_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = eventfd_link_ioctl,
-};
-
-
-static struct miscdevice eventfd_link_misc = {
- .name = "eventfd-link",
- .fops = &eventfd_link_fops,
-};
-
-static int __init
-eventfd_link_init (void)
-{
- return misc_register (&eventfd_link_misc);
-}
-
-module_init (eventfd_link_init);
-
-static void __exit
-eventfd_link_exit (void)
-{
- misc_deregister (&eventfd_link_misc);
-}
-
-module_exit (eventfd_link_exit);
-
-MODULE_VERSION ("0.0.1");
-MODULE_LICENSE ("GPL v2");
-MODULE_AUTHOR ("Anthony Fee");
-MODULE_DESCRIPTION ("Link eventfd");
-MODULE_ALIAS ("devname:eventfd-link");
diff --git a/examples/vhost/eventfd_link/eventfd_link.h b/examples/vhost/eventfd_link/eventfd_link.h
deleted file mode 100644
index a32a8dd..0000000
--- a/examples/vhost/eventfd_link/eventfd_link.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*-
- * * This file is provided under a dual BSD/GPLv2 license. When using or
- * * redistributing this file, you may do so under either license.
- * *
- * * GPL LICENSE SUMMARY
- * *
- * * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * *
- * * This program is free software; you can redistribute it and/or modify
- * * it under the terms of version 2 of the GNU General Public License as
- * * published by the Free Software Foundation.
- * *
- * * This program is distributed in the hope that it will be useful, but
- * * WITHOUT ANY WARRANTY; without even the implied warranty of
- * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * * General Public License for more details.
- * *
- * * You should have received a copy of the GNU General Public License
- * * along with this program; if not, write to the Free Software
- * * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * * The full GNU General Public License is included in this distribution
- * * in the file called LICENSE.GPL.
- * *
- * * Contact Information:
- * * Intel Corporation
- * *
- * * BSD LICENSE
- * *
- * * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * * All rights reserved.
- * *
- * * Redistribution and use in source and binary forms, with or without
- * * modification, are permitted provided that the following conditions
- * * are met:
- * *
- * * * Redistributions of source code must retain the above copyright
- * * notice, this list of conditions and the following disclaimer.
- * * * Redistributions in binary form must reproduce the above copyright
- * * notice, this list of conditions and the following disclaimer in
- * * the documentation and/or other materials provided with the
- * * distribution.
- * * * Neither the name of Intel Corporation nor the names of its
- * * contributors may be used to endorse or promote products derived
- * * from this software without specific prior written permission.
- * *
- * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- * *
- * */
-
-#ifndef _EVENTFD_LINK_H_
-#define _EVENTFD_LINK_H_
-
-/*
- * ioctl to copy an fd entry in calling process to an fd in a target process
- */
-#define EVENTFD_COPY 1
-
-/*
- * arguements for the EVENTFD_COPY ioctl
- */
-struct eventfd_copy {
- // fd in the target pid
- unsigned target_fd;
- // fd in the calling pid
- unsigned source_fd;
- // pid of the target pid
- pid_t target_pid;
-};
-#endif /* _EVENTFD_LINK_H_ */
diff --git a/examples/vhost/libvirt/qemu-wrap.py b/examples/vhost/libvirt/qemu-wrap.py
deleted file mode 100755
index e2d68a0..0000000
--- a/examples/vhost/libvirt/qemu-wrap.py
+++ /dev/null
@@ -1,367 +0,0 @@
-#!/usr/bin/python
-#/*
-# * BSD LICENSE
-# *
-# * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-# * All rights reserved.
-# *
-# * Redistribution and use in source and binary forms, with or without
-# * modification, are permitted provided that the following conditions
-# * are met:
-# *
-# * * Redistributions of source code must retain the above copyright
-# * notice, this list of conditions and the following disclaimer.
-# * * Redistributions in binary form must reproduce the above copyright
-# * notice, this list of conditions and the following disclaimer in
-# * the documentation and/or other materials provided with the
-# * distribution.
-# * * Neither the name of Intel Corporation nor the names of its
-# * contributors may be used to endorse or promote products derived
-# * from this software without specific prior written permission.
-# *
-# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# */
-
-#####################################################################
-# This script is designed to modify the call to the QEMU emulator
-# to support userspace vhost when starting a guest machine through
-# libvirt with vhost enabled. The steps to enable this are as follows
-# and should be run as root:
-#
-# 1. Place this script in a libvirtd's binary search PATH ($PATH)
-# A good location would be in the same directory that the QEMU
-# binary is located
-#
-# 2. Ensure that the script has the same owner/group and file
-# permissions as the QEMU binary
-#
-# 3. Update the VM xml file using "virsh edit VM.xml"
-#
-# 3.a) Set the VM to use the launch script
-#
-# Set the emulator path contained in the
-# <emulator><emulator/> tags
-#
-# e.g replace <emulator>/usr/bin/qemu-kvm<emulator/>
-# with <emulator>/usr/bin/qemu-wrap.py<emulator/>
-#
-# 3.b) Set the VM's device's to use vhost-net offload
-#
-# <interface type="network">
-# <model type="virtio"/>
-# <driver name="vhost"/>
-# <interface/>
-#
-# 4. Enable libvirt to access our userpace device file by adding it to
-# controllers cgroup for libvirtd using the following steps
-#
-# 4.a) In /etc/libvirt/qemu.conf add/edit the following lines:
-# 1) cgroup_controllers = [ ... "devices", ... ]
-# 2) clear_emulator_capabilities = 0
-# 3) user = "root"
-# 4) group = "root"
-# 5) cgroup_device_acl = [
-# "/dev/null", "/dev/full", "/dev/zero",
-# "/dev/random", "/dev/urandom",
-# "/dev/ptmx", "/dev/kvm", "/dev/kqemu",
-# "/dev/rtc", "/dev/hpet", "/dev/net/tun",
-# "/dev/<devbase-name>-<index>",
-# ]
-#
-# 4.b) Disable SELinux or set to permissive mode
-#
-# 4.c) Mount cgroup device controller
-# "mkdir /dev/cgroup"
-# "mount -t cgroup none /dev/cgroup -o devices"
-#
-# 4.d) Set hugetlbfs_mount variable - ( Optional )
-# VMs using userspace vhost must use hugepage backed
-# memory. This can be enabled in the libvirt XML
-# config by adding a memory backing section to the
-# XML config e.g.
-# <memoryBacking>
-# <hugepages/>
-# </memoryBacking>
-# This memory backing section should be added after the
-# <memory> and <currentMemory> sections. This will add
-# flags "-mem-prealloc -mem-path <path>" to the QEMU
-# command line. The hugetlbfs_mount variable can be used
-# to override the default <path> passed through by libvirt.
-#
-# if "-mem-prealloc" or "-mem-path <path>" are not passed
-# through and a vhost device is detected then these options will
-# be automatically added by this script. This script will detect
-# the system hugetlbfs mount point to be used for <path>. The
-# default <path> for this script can be overidden by the
-# hugetlbfs_dir variable in the configuration section of this script.
-#
-#
-# 4.e) Restart the libvirtd system process
-# e.g. on Fedora "systemctl restart libvirtd.service"
-#
-#
-# 4.f) Edit the Configuration Parameters section of this script
-# to point to the correct emulator location and set any
-# addition options
-#
-# The script modifies the libvirtd Qemu call by modifying/adding
-# options based on the configuration parameters below.
-# NOTE:
-# emul_path and us_vhost_path must be set
-# All other parameters are optional
-#####################################################################
-
-
-#############################################
-# Configuration Parameters
-#############################################
-#Path to QEMU binary
-emul_path = "/usr/local/bin/qemu-system-x86_64"
-
-#Path to userspace vhost device file
-# This filename should match the --dev-basename --dev-index parameters of
-# the command used to launch the userspace vhost sample application e.g.
-# if the sample app lauch command is:
-# ./build/vhost-switch ..... --dev-basename usvhost --dev-index 1
-# then this variable should be set to:
-# us_vhost_path = "/dev/usvhost-1"
-us_vhost_path = "/dev/usvhost-1"
-
-#List of additional user defined emulation options. These options will
-#be added to all Qemu calls
-emul_opts_user = []
-
-#List of additional user defined emulation options for vhost only.
-#These options will only be added to vhost enabled guests
-emul_opts_user_vhost = []
-
-#For all VHOST enabled VMs, the VM memory is preallocated from hugetlbfs
-# Set this variable to one to enable this option for all VMs
-use_huge_all = 0
-
-#Instead of autodetecting, override the hugetlbfs directory by setting
-#this variable
-hugetlbfs_dir = ""
-
-#############################################
-
-
-#############################################
-# ****** Do Not Modify Below this Line ******
-#############################################
-
-import sys, os, subprocess
-
-
-#List of open userspace vhost file descriptors
-fd_list = []
-
-#additional virtio device flags when using userspace vhost
-vhost_flags = [ "csum=off",
- "gso=off",
- "guest_tso4=off",
- "guest_tso6=off",
- "guest_ecn=off"
- ]
-
-
-#############################################
-# Find the system hugefile mount point.
-# Note:
-# if multiple hugetlbfs mount points exist
-# then the first one found will be used
-#############################################
-def find_huge_mount():
-
- if (len(hugetlbfs_dir)):
- return hugetlbfs_dir
-
- huge_mount = ""
-
- if (os.access("/proc/mounts", os.F_OK)):
- f = open("/proc/mounts", "r")
- line = f.readline()
- while line:
- line_split = line.split(" ")
- if line_split[2] == 'hugetlbfs':
- huge_mount = line_split[1]
- break
- line = f.readline()
- else:
- print "/proc/mounts not found"
- exit (1)
-
- f.close
- if len(huge_mount) == 0:
- print "Failed to find hugetlbfs mount point"
- exit (1)
-
- return huge_mount
-
-
-#############################################
-# Get a userspace Vhost file descriptor
-#############################################
-def get_vhost_fd():
-
- if (os.access(us_vhost_path, os.F_OK)):
- fd = os.open( us_vhost_path, os.O_RDWR)
- else:
- print ("US-Vhost file %s not found" %us_vhost_path)
- exit (1)
-
- return fd
-
-
-#############################################
-# Check for vhostfd. if found then replace
-# with our own vhost fd and append any vhost
-# flags onto the end
-#############################################
-def modify_netdev_arg(arg):
-
- global fd_list
- vhost_in_use = 0
- s = ''
- new_opts = []
- netdev_opts = arg.split(",")
-
- for opt in netdev_opts:
- #check if vhost is used
- if "vhost" == opt[:5]:
- vhost_in_use = 1
- else:
- new_opts.append(opt)
-
- #if using vhost append vhost options
- if vhost_in_use == 1:
- #append vhost on option
- new_opts.append('vhost=on')
- #append vhostfd ption
- new_fd = get_vhost_fd()
- new_opts.append('vhostfd=' + str(new_fd))
- fd_list.append(new_fd)
-
- #concatenate all options
- for opt in new_opts:
- if len(s) > 0:
- s+=','
-
- s+=opt
-
- return s
-
-
-#############################################
-# Main
-#############################################
-def main():
-
- global fd_list
- global vhost_in_use
- new_args = []
- num_cmd_args = len(sys.argv)
- emul_call = ''
- mem_prealloc_set = 0
- mem_path_set = 0
- num = 0;
-
- #parse the parameters
- while (num < num_cmd_args):
- arg = sys.argv[num]
-
- #Check netdev +1 parameter for vhostfd
- if arg == '-netdev':
- num_vhost_devs = len(fd_list)
- new_args.append(arg)
-
- num+=1
- arg = sys.argv[num]
- mod_arg = modify_netdev_arg(arg)
- new_args.append(mod_arg)
-
- #append vhost flags if this is a vhost device
- # and -device is the next arg
- # i.e -device -opt1,-opt2,...,-opt3,%vhost
- if (num_vhost_devs < len(fd_list)):
- num+=1
- arg = sys.argv[num]
- if arg == '-device':
- new_args.append(arg)
- num+=1
- new_arg = sys.argv[num]
- for flag in vhost_flags:
- new_arg = ''.join([new_arg,',',flag])
- new_args.append(new_arg)
- else:
- new_args.append(arg)
- elif arg == '-mem-prealloc':
- mem_prealloc_set = 1
- new_args.append(arg)
- elif arg == '-mem-path':
- mem_path_set = 1
- new_args.append(arg)
-
- else:
- new_args.append(arg)
-
- num+=1
-
- #Set Qemu binary location
- emul_call+=emul_path
- emul_call+=" "
-
- #Add prealloc mem options if using vhost and not already added
- if ((len(fd_list) > 0) and (mem_prealloc_set == 0)):
- emul_call += "-mem-prealloc "
-
- #Add mempath mem options if using vhost and not already added
- if ((len(fd_list) > 0) and (mem_path_set == 0)):
- #Detect and add hugetlbfs mount point
- mp = find_huge_mount()
- mp = "".join(["-mem-path ", mp])
- emul_call += mp
- emul_call += " "
-
-
- #add user options
- for opt in emul_opts_user:
- emul_call += opt
- emul_call += " "
-
- #Add add user vhost only options
- if len(fd_list) > 0:
- for opt in emul_opts_user_vhost:
- emul_call += opt
- emul_call += " "
-
- #Add updated libvirt options
- iter_args = iter(new_args)
- #skip 1st arg i.e. call to this script
- next(iter_args)
- for arg in iter_args:
- emul_call+=str(arg)
- emul_call+= " "
-
- #Call QEMU
- subprocess.call(emul_call, shell=True)
-
-
- #Close usvhost files
- for fd in fd_list:
- os.close(fd)
-
-
-if __name__ == "__main__":
- main()
-
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
deleted file mode 100644
index 7d9e6a2..0000000
--- a/examples/vhost/main.c
+++ /dev/null
@@ -1,3722 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <arpa/inet.h>
-#include <getopt.h>
-#include <linux/if_ether.h>
-#include <linux/if_vlan.h>
-#include <linux/virtio_net.h>
-#include <linux/virtio_ring.h>
-#include <signal.h>
-#include <stdint.h>
-#include <sys/eventfd.h>
-#include <sys/param.h>
-#include <unistd.h>
-
-#include <rte_atomic.h>
-#include <rte_cycles.h>
-#include <rte_ethdev.h>
-#include <rte_log.h>
-#include <rte_string_fns.h>
-#include <rte_malloc.h>
-
-#include "main.h"
-#include "virtio-net.h"
-#include "vhost-net-cdev.h"
-
-#define MAX_QUEUES 128
-
-/* the maximum number of external ports supported */
-#define MAX_SUP_PORTS 1
-
-/*
- * Calculate the number of buffers needed per port
- */
-#define NUM_MBUFS_PER_PORT ((MAX_QUEUES*RTE_TEST_RX_DESC_DEFAULT) + \
- (num_switching_cores*MAX_PKT_BURST) + \
- (num_switching_cores*RTE_TEST_TX_DESC_DEFAULT) +\
- (num_switching_cores*MBUF_CACHE_SIZE))
-
-#define MBUF_CACHE_SIZE 128
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
-
-/*
- * No frame data buffer allocated from host are required for zero copy
- * implementation, guest will allocate the frame data buffer, and vhost
- * directly use it.
- */
-#define VIRTIO_DESCRIPTOR_LEN_ZCP 1518
-#define MBUF_SIZE_ZCP (VIRTIO_DESCRIPTOR_LEN_ZCP + sizeof(struct rte_mbuf) \
- + RTE_PKTMBUF_HEADROOM)
-#define MBUF_CACHE_SIZE_ZCP 0
-
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-#define RX_PTHRESH 8 /* Default values of RX prefetch threshold reg. */
-#define RX_HTHRESH 8 /* Default values of RX host threshold reg. */
-#define RX_WTHRESH 4 /* Default values of RX write-back threshold reg. */
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-#define TX_PTHRESH 36 /* Default values of TX prefetch threshold reg. */
-#define TX_HTHRESH 0 /* Default values of TX host threshold reg. */
-#define TX_WTHRESH 0 /* Default values of TX write-back threshold reg. */
-
-#define MAX_PKT_BURST 32 /* Max burst size for RX/TX */
-#define MAX_MRG_PKT_BURST 16 /* Max burst for merge buffers. Set to 1 due to performance issue. */
-#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
-
-#define BURST_RX_WAIT_US 15 /* Defines how long we wait between retries on RX */
-#define BURST_RX_RETRIES 4 /* Number of retries on RX. */
-
-#define JUMBO_FRAME_MAX_SIZE 0x2600
-
-/* State of virtio device. */
-#define DEVICE_MAC_LEARNING 0
-#define DEVICE_RX 1
-#define DEVICE_SAFE_REMOVE 2
-
-/* Config_core_flag status definitions. */
-#define REQUEST_DEV_REMOVAL 1
-#define ACK_DEV_REMOVAL 0
-
-/* Configurable number of RX/TX ring descriptors */
-#define RTE_TEST_RX_DESC_DEFAULT 1024
-#define RTE_TEST_TX_DESC_DEFAULT 512
-
-/*
- * Need refine these 2 macros for legacy and DPDK based front end:
- * Max vring avail descriptor/entries from guest - MAX_PKT_BURST
- * And then adjust power 2.
- */
-/*
- * For legacy front end, 128 descriptors,
- * half for virtio header, another half for mbuf.
- */
-#define RTE_TEST_RX_DESC_DEFAULT_ZCP 32 /* legacy: 32, DPDK virt FE: 128. */
-#define RTE_TEST_TX_DESC_DEFAULT_ZCP 64 /* legacy: 64, DPDK virt FE: 64. */
-
-/* Get first 4 bytes in mbuf headroom. */
-#define MBUF_HEADROOM_UINT32(mbuf) (*(uint32_t *)((uint8_t *)(mbuf) \
- + sizeof(struct rte_mbuf)))
-
-/* true if x is a power of 2 */
-#define POWEROF2(x) ((((x)-1) & (x)) == 0)
-
-#define INVALID_PORT_ID 0xFF
-
-/* Max number of devices. Limited by vmdq. */
-#define MAX_DEVICES 64
-
-/* Size of buffers used for snprintfs. */
-#define MAX_PRINT_BUFF 6072
-
-/* Maximum character device basename size. */
-#define MAX_BASENAME_SZ 10
-
-/* Maximum long option length for option parsing. */
-#define MAX_LONG_OPT_SZ 64
-
-/* Used to compare MAC addresses. */
-#define MAC_ADDR_CMP 0xFFFFFFFFFFFFULL
-
-/* Number of descriptors per cacheline. */
-#define DESC_PER_CACHELINE (CACHE_LINE_SIZE / sizeof(struct vring_desc))
-
-/* mask of enabled ports */
-static uint32_t enabled_port_mask = 0;
-
-/*Number of switching cores enabled*/
-static uint32_t num_switching_cores = 0;
-
-/* number of devices/queues to support*/
-static uint32_t num_queues = 0;
-uint32_t num_devices = 0;
-
-/*
- * Enable zero copy, pkts buffer will directly dma to hw descriptor,
- * disabled on default.
- */
-static uint32_t zero_copy;
-
-/* number of descriptors to apply*/
-static uint32_t num_rx_descriptor = RTE_TEST_RX_DESC_DEFAULT_ZCP;
-static uint32_t num_tx_descriptor = RTE_TEST_TX_DESC_DEFAULT_ZCP;
-
-/* max ring descriptor, ixgbe, i40e, e1000 all are 4096. */
-#define MAX_RING_DESC 4096
-
-struct vpool {
- struct rte_mempool *pool;
- struct rte_ring *ring;
- uint32_t buf_size;
-} vpool_array[MAX_QUEUES+MAX_QUEUES];
-
-/* Enable VM2VM communications. If this is disabled then the MAC address compare is skipped. */
-typedef enum {
- VM2VM_DISABLED = 0,
- VM2VM_SOFTWARE = 1,
- VM2VM_HARDWARE = 2,
- VM2VM_LAST
-} vm2vm_type;
-static vm2vm_type vm2vm_mode = VM2VM_SOFTWARE;
-
-/* The type of host physical address translated from guest physical address. */
-typedef enum {
- PHYS_ADDR_CONTINUOUS = 0,
- PHYS_ADDR_CROSS_SUBREG = 1,
- PHYS_ADDR_INVALID = 2,
- PHYS_ADDR_LAST
-} hpa_type;
-
-/* Enable stats. */
-static uint32_t enable_stats = 0;
-/* Enable retries on RX. */
-static uint32_t enable_retry = 1;
-/* Specify timeout (in useconds) between retries on RX. */
-static uint32_t burst_rx_delay_time = BURST_RX_WAIT_US;
-/* Specify the number of retries on RX. */
-static uint32_t burst_rx_retry_num = BURST_RX_RETRIES;
-
-/* Character device basename. Can be set by user. */
-static char dev_basename[MAX_BASENAME_SZ] = "vhost-net";
-
-/* Charater device index. Can be set by user. */
-static uint32_t dev_index = 0;
-
-/* This can be set by the user so it is made available here. */
-extern uint64_t VHOST_FEATURES;
-
-/* Default configuration for rx and tx thresholds etc. */
-static struct rte_eth_rxconf rx_conf_default = {
- .rx_thresh = {
- .pthresh = RX_PTHRESH,
- .hthresh = RX_HTHRESH,
- .wthresh = RX_WTHRESH,
- },
- .rx_drop_en = 1,
-};
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe/igb PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-static struct rte_eth_txconf tx_conf_default = {
- .tx_thresh = {
- .pthresh = TX_PTHRESH,
- .hthresh = TX_HTHRESH,
- .wthresh = TX_WTHRESH,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
-};
-
-/* empty vmdq configuration structure. Filled in programatically */
-static struct rte_eth_conf vmdq_conf_default = {
- .rxmode = {
- .mq_mode = ETH_MQ_RX_VMDQ_ONLY,
- .split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- /*
- * It is necessary for 1G NIC such as I350,
- * this fixes bug of ipv4 forwarding in guest can't
- * forward pakets from one virtio dev to another virtio dev.
- */
- .hw_vlan_strip = 1, /**< VLAN strip enabled. */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
- },
-
- .txmode = {
- .mq_mode = ETH_MQ_TX_NONE,
- },
- .rx_adv_conf = {
- /*
- * should be overridden separately in code with
- * appropriate values
- */
- .vmdq_rx_conf = {
- .nb_queue_pools = ETH_8_POOLS,
- .enable_default_pool = 0,
- .default_pool = 0,
- .nb_pool_maps = 0,
- .pool_map = {{0, 0},},
- },
- },
-};
-
-static unsigned lcore_ids[RTE_MAX_LCORE];
-static uint8_t ports[RTE_MAX_ETHPORTS];
-static unsigned num_ports = 0; /**< The number of ports specified in command line */
-
-static const uint16_t external_pkt_default_vlan_tag = 2000;
-const uint16_t vlan_tags[] = {
- 1000, 1001, 1002, 1003, 1004, 1005, 1006, 1007,
- 1008, 1009, 1010, 1011, 1012, 1013, 1014, 1015,
- 1016, 1017, 1018, 1019, 1020, 1021, 1022, 1023,
- 1024, 1025, 1026, 1027, 1028, 1029, 1030, 1031,
- 1032, 1033, 1034, 1035, 1036, 1037, 1038, 1039,
- 1040, 1041, 1042, 1043, 1044, 1045, 1046, 1047,
- 1048, 1049, 1050, 1051, 1052, 1053, 1054, 1055,
- 1056, 1057, 1058, 1059, 1060, 1061, 1062, 1063,
-};
-
-/* ethernet addresses of ports */
-static struct ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
-
-/* heads for the main used and free linked lists for the data path. */
-static struct virtio_net_data_ll *ll_root_used = NULL;
-static struct virtio_net_data_ll *ll_root_free = NULL;
-
-/* Array of data core structures containing information on individual core linked lists. */
-static struct lcore_info lcore_info[RTE_MAX_LCORE];
-
-/* Used for queueing bursts of TX packets. */
-struct mbuf_table {
- unsigned len;
- unsigned txq_id;
- struct rte_mbuf *m_table[MAX_PKT_BURST];
-};
-
-/* TX queue for each data core. */
-struct mbuf_table lcore_tx_queue[RTE_MAX_LCORE];
-
-/* TX queue fori each virtio device for zero copy. */
-struct mbuf_table tx_queue_zcp[MAX_QUEUES];
-
-/* Vlan header struct used to insert vlan tags on TX. */
-struct vlan_ethhdr {
- unsigned char h_dest[ETH_ALEN];
- unsigned char h_source[ETH_ALEN];
- __be16 h_vlan_proto;
- __be16 h_vlan_TCI;
- __be16 h_vlan_encapsulated_proto;
-};
-
-/* IPv4 Header */
-struct ipv4_hdr {
- uint8_t version_ihl; /**< version and header length */
- uint8_t type_of_service; /**< type of service */
- uint16_t total_length; /**< length of packet */
- uint16_t packet_id; /**< packet ID */
- uint16_t fragment_offset; /**< fragmentation offset */
- uint8_t time_to_live; /**< time to live */
- uint8_t next_proto_id; /**< protocol ID */
- uint16_t hdr_checksum; /**< header checksum */
- uint32_t src_addr; /**< source address */
- uint32_t dst_addr; /**< destination address */
-} __attribute__((__packed__));
-
-/* Header lengths. */
-#define VLAN_HLEN 4
-#define VLAN_ETH_HLEN 18
-
-/* Per-device statistics struct */
-struct device_statistics {
- uint64_t tx_total;
- rte_atomic64_t rx_total_atomic;
- uint64_t rx_total;
- uint64_t tx;
- rte_atomic64_t rx_atomic;
- uint64_t rx;
-} __rte_cache_aligned;
-struct device_statistics dev_statistics[MAX_DEVICES];
-
-/*
- * Builds up the correct configuration for VMDQ VLAN pool map
- * according to the pool & queue limits.
- */
-static inline int
-get_eth_conf(struct rte_eth_conf *eth_conf, uint32_t num_devices)
-{
- struct rte_eth_vmdq_rx_conf conf;
- unsigned i;
-
- memset(&conf, 0, sizeof(conf));
- conf.nb_queue_pools = (enum rte_eth_nb_pools)num_devices;
- conf.nb_pool_maps = num_devices;
- conf.enable_loop_back =
- vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back;
-
- for (i = 0; i < conf.nb_pool_maps; i++) {
- conf.pool_map[i].vlan_id = vlan_tags[ i ];
- conf.pool_map[i].pools = (1UL << i);
- }
-
- (void)(rte_memcpy(eth_conf, &vmdq_conf_default, sizeof(*eth_conf)));
- (void)(rte_memcpy(ð_conf->rx_adv_conf.vmdq_rx_conf, &conf,
- sizeof(eth_conf->rx_adv_conf.vmdq_rx_conf)));
- return 0;
-}
-
-/*
- * Validate the device number according to the max pool number gotten form
- * dev_info. If the device number is invalid, give the error message and
- * return -1. Each device must have its own pool.
- */
-static inline int
-validate_num_devices(uint32_t max_nb_devices)
-{
- if (num_devices > max_nb_devices) {
- RTE_LOG(ERR, VHOST_PORT, "invalid number of devices\n");
- return -1;
- }
- return 0;
-}
-
-/*
- * Initialises a given port using global settings and with the rx buffers
- * coming from the mbuf_pool passed as parameter
- */
-static inline int
-port_init(uint8_t port)
-{
- struct rte_eth_dev_info dev_info;
- struct rte_eth_conf port_conf;
- uint16_t rx_rings, tx_rings;
- uint16_t rx_ring_size, tx_ring_size;
- int retval;
- uint16_t q;
-
- /* The max pool number from dev_info will be used to validate the pool number specified in cmd line */
- rte_eth_dev_info_get (port, &dev_info);
-
- /*configure the number of supported virtio devices based on VMDQ limits */
- num_devices = dev_info.max_vmdq_pools;
- num_queues = dev_info.max_rx_queues;
-
- if (zero_copy) {
- rx_ring_size = num_rx_descriptor;
- tx_ring_size = num_tx_descriptor;
- tx_rings = dev_info.max_tx_queues;
- } else {
- rx_ring_size = RTE_TEST_RX_DESC_DEFAULT;
- tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
- tx_rings = (uint16_t)rte_lcore_count();
- }
-
- retval = validate_num_devices(MAX_DEVICES);
- if (retval < 0)
- return retval;
-
- /* Get port configuration. */
- retval = get_eth_conf(&port_conf, num_devices);
- if (retval < 0)
- return retval;
-
- if (port >= rte_eth_dev_count()) return -1;
-
- rx_rings = (uint16_t)num_queues,
- /* Configure ethernet device. */
- retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
- if (retval != 0)
- return retval;
-
- /* Setup the queues. */
- for (q = 0; q < rx_rings; q ++) {
- retval = rte_eth_rx_queue_setup(port, q, rx_ring_size,
- rte_eth_dev_socket_id(port), &rx_conf_default,
- vpool_array[q].pool);
- if (retval < 0)
- return retval;
- }
- for (q = 0; q < tx_rings; q ++) {
- retval = rte_eth_tx_queue_setup(port, q, tx_ring_size,
- rte_eth_dev_socket_id(port), &tx_conf_default);
- if (retval < 0)
- return retval;
- }
-
- /* Start the device. */
- retval = rte_eth_dev_start(port);
- if (retval < 0) {
- RTE_LOG(ERR, VHOST_DATA, "Failed to start the device.\n");
- return retval;
- }
-
- rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
- RTE_LOG(INFO, VHOST_PORT, "Max virtio devices supported: %u\n", num_devices);
- RTE_LOG(INFO, VHOST_PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
- " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
- (unsigned)port,
- vmdq_ports_eth_addr[port].addr_bytes[0],
- vmdq_ports_eth_addr[port].addr_bytes[1],
- vmdq_ports_eth_addr[port].addr_bytes[2],
- vmdq_ports_eth_addr[port].addr_bytes[3],
- vmdq_ports_eth_addr[port].addr_bytes[4],
- vmdq_ports_eth_addr[port].addr_bytes[5]);
-
- return 0;
-}
-
-/*
- * Set character device basename.
- */
-static int
-us_vhost_parse_basename(const char *q_arg)
-{
- /* parse number string */
-
- if (strnlen(q_arg, MAX_BASENAME_SZ) > MAX_BASENAME_SZ)
- return -1;
- else
- snprintf((char*)&dev_basename, MAX_BASENAME_SZ, "%s", q_arg);
-
- return 0;
-}
-
-/*
- * Parse the portmask provided at run time.
- */
-static int
-parse_portmask(const char *portmask)
-{
- char *end = NULL;
- unsigned long pm;
-
- errno = 0;
-
- /* parse hexadecimal string */
- pm = strtoul(portmask, &end, 16);
- if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
- return -1;
-
- if (pm == 0)
- return -1;
-
- return pm;
-
-}
-
-/*
- * Parse num options at run time.
- */
-static int
-parse_num_opt(const char *q_arg, uint32_t max_valid_value)
-{
- char *end = NULL;
- unsigned long num;
-
- errno = 0;
-
- /* parse unsigned int string */
- num = strtoul(q_arg, &end, 10);
- if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
- return -1;
-
- if (num > max_valid_value)
- return -1;
-
- return num;
-
-}
-
-/*
- * Display usage
- */
-static void
-us_vhost_usage(const char *prgname)
-{
- RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
- " --vm2vm [0|1|2]\n"
- " --rx_retry [0|1] --mergeable [0|1] --stats [0-N]\n"
- " --dev-basename <name> --dev-index [0-N]\n"
- " --nb-devices ND\n"
- " -p PORTMASK: Set mask for ports to be used by application\n"
- " --vm2vm [0|1|2]: disable/software(default)/hardware vm2vm comms\n"
- " --rx-retry [0|1]: disable/enable(default) retries on rx. Enable retry if destintation queue is full\n"
- " --rx-retry-delay [0-N]: timeout(in usecond) between retries on RX. This makes effect only if retries on rx enabled\n"
- " --rx-retry-num [0-N]: the number of retries on rx. This makes effect only if retries on rx enabled\n"
- " --mergeable [0|1]: disable(default)/enable RX mergeable buffers\n"
- " --stats [0-N]: 0: Disable stats, N: Time in seconds to print stats\n"
- " --dev-basename: The basename to be used for the character device.\n"
- " --dev-index [0-N]: Defaults to zero if not used. Index is appended to basename.\n"
- " --zero-copy [0|1]: disable(default)/enable rx/tx "
- "zero copy\n"
- " --rx-desc-num [0-N]: the number of descriptors on rx, "
- "used only when zero copy is enabled.\n"
- " --tx-desc-num [0-N]: the number of descriptors on tx, "
- "used only when zero copy is enabled.\n",
- prgname);
-}
-
-/*
- * Parse the arguments given in the command line of the application.
- */
-static int
-us_vhost_parse_args(int argc, char **argv)
-{
- int opt, ret;
- int option_index;
- unsigned i;
- const char *prgname = argv[0];
- static struct option long_option[] = {
- {"vm2vm", required_argument, NULL, 0},
- {"rx-retry", required_argument, NULL, 0},
- {"rx-retry-delay", required_argument, NULL, 0},
- {"rx-retry-num", required_argument, NULL, 0},
- {"mergeable", required_argument, NULL, 0},
- {"stats", required_argument, NULL, 0},
- {"dev-basename", required_argument, NULL, 0},
- {"dev-index", required_argument, NULL, 0},
- {"zero-copy", required_argument, NULL, 0},
- {"rx-desc-num", required_argument, NULL, 0},
- {"tx-desc-num", required_argument, NULL, 0},
- {NULL, 0, 0, 0},
- };
-
- /* Parse command line */
- while ((opt = getopt_long(argc, argv, "p:",long_option, &option_index)) != EOF) {
- switch (opt) {
- /* Portmask */
- case 'p':
- enabled_port_mask = parse_portmask(optarg);
- if (enabled_port_mask == 0) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid portmask\n");
- us_vhost_usage(prgname);
- return -1;
- }
- break;
-
- case 0:
- /* Enable/disable vm2vm comms. */
- if (!strncmp(long_option[option_index].name, "vm2vm",
- MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, (VM2VM_LAST - 1));
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG,
- "Invalid argument for "
- "vm2vm [0|1|2]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- vm2vm_mode = (vm2vm_type)ret;
- }
- }
-
- /* Enable/disable retries on RX. */
- if (!strncmp(long_option[option_index].name, "rx-retry", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, 1);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry [0|1]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- enable_retry = ret;
- }
- }
-
- /* Specify the retries delay time (in useconds) on RX. */
- if (!strncmp(long_option[option_index].name, "rx-retry-delay", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, INT32_MAX);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry-delay [0-N]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- burst_rx_delay_time = ret;
- }
- }
-
- /* Specify the retries number on RX. */
- if (!strncmp(long_option[option_index].name, "rx-retry-num", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, INT32_MAX);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry-num [0-N]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- burst_rx_retry_num = ret;
- }
- }
-
- /* Enable/disable RX mergeable buffers. */
- if (!strncmp(long_option[option_index].name, "mergeable", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, 1);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for mergeable [0|1]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- if (ret) {
- vmdq_conf_default.rxmode.jumbo_frame = 1;
- vmdq_conf_default.rxmode.max_rx_pkt_len
- = JUMBO_FRAME_MAX_SIZE;
- VHOST_FEATURES = (1ULL << VIRTIO_NET_F_MRG_RXBUF);
- }
- }
- }
-
- /* Enable/disable stats. */
- if (!strncmp(long_option[option_index].name, "stats", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, INT32_MAX);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for stats [0..N]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- enable_stats = ret;
- }
- }
-
- /* Set character device basename. */
- if (!strncmp(long_option[option_index].name, "dev-basename", MAX_LONG_OPT_SZ)) {
- if (us_vhost_parse_basename(optarg) == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device basename (Max %d characters)\n", MAX_BASENAME_SZ);
- us_vhost_usage(prgname);
- return -1;
- }
- }
-
- /* Set character device index. */
- if (!strncmp(long_option[option_index].name, "dev-index", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, INT32_MAX);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device index [0..N]\n");
- us_vhost_usage(prgname);
- return -1;
- } else
- dev_index = ret;
- }
-
- /* Enable/disable rx/tx zero copy. */
- if (!strncmp(long_option[option_index].name,
- "zero-copy", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, 1);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG,
- "Invalid argument"
- " for zero-copy [0|1]\n");
- us_vhost_usage(prgname);
- return -1;
- } else
- zero_copy = ret;
-
- if (zero_copy) {
-#ifdef RTE_MBUF_SCATTER_GATHER
- RTE_LOG(ERR, VHOST_CONFIG, "Before running "
- "zero copy vhost APP, please "
- "disable RTE_MBUF_SCATTER_GATHER\n"
- "in config file and then rebuild DPDK "
- "core lib!\n"
- "Otherwise please disable zero copy "
- "flag in command line!\n");
- return -1;
-#endif
- }
- }
-
- /* Specify the descriptor number on RX. */
- if (!strncmp(long_option[option_index].name,
- "rx-desc-num", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, MAX_RING_DESC);
- if ((ret == -1) || (!POWEROF2(ret))) {
- RTE_LOG(INFO, VHOST_CONFIG,
- "Invalid argument for rx-desc-num[0-N],"
- "power of 2 required.\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- num_rx_descriptor = ret;
- }
- }
-
- /* Specify the descriptor number on TX. */
- if (!strncmp(long_option[option_index].name,
- "tx-desc-num", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, MAX_RING_DESC);
- if ((ret == -1) || (!POWEROF2(ret))) {
- RTE_LOG(INFO, VHOST_CONFIG,
- "Invalid argument for tx-desc-num [0-N],"
- "power of 2 required.\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- num_tx_descriptor = ret;
- }
- }
-
- break;
-
- /* Invalid option - print options. */
- default:
- us_vhost_usage(prgname);
- return -1;
- }
- }
-
- for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
- if (enabled_port_mask & (1 << i))
- ports[num_ports++] = (uint8_t)i;
- }
-
- if ((num_ports == 0) || (num_ports > MAX_SUP_PORTS)) {
- RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
- "but only %u port can be enabled\n",num_ports, MAX_SUP_PORTS);
- return -1;
- }
-
- if ((zero_copy == 1) && (vm2vm_mode == VM2VM_SOFTWARE)) {
- RTE_LOG(INFO, VHOST_PORT,
- "Vhost zero copy doesn't support software vm2vm,"
- "please specify 'vm2vm 2' to use hardware vm2vm.\n");
- return -1;
- }
-
- if ((zero_copy == 1) && (vmdq_conf_default.rxmode.jumbo_frame == 1)) {
- RTE_LOG(INFO, VHOST_PORT,
- "Vhost zero copy doesn't support jumbo frame,"
- "please specify '--mergeable 0' to disable the "
- "mergeable feature.\n");
- return -1;
- }
-
- return 0;
-}
-
-/*
- * Update the global var NUM_PORTS and array PORTS according to system ports number
- * and return valid ports number
- */
-static unsigned check_ports_num(unsigned nb_ports)
-{
- unsigned valid_num_ports = num_ports;
- unsigned portid;
-
- if (num_ports > nb_ports) {
- RTE_LOG(INFO, VHOST_PORT, "\nSpecified port number(%u) exceeds total system port number(%u)\n",
- num_ports, nb_ports);
- num_ports = nb_ports;
- }
-
- for (portid = 0; portid < num_ports; portid ++) {
- if (ports[portid] >= nb_ports) {
- RTE_LOG(INFO, VHOST_PORT, "\nSpecified port ID(%u) exceeds max system port ID(%u)\n",
- ports[portid], (nb_ports - 1));
- ports[portid] = INVALID_PORT_ID;
- valid_num_ports--;
- }
- }
- return valid_num_ports;
-}
-
-/*
- * Macro to print out packet contents. Wrapped in debug define so that the
- * data path is not effected when debug is disabled.
- */
-#ifdef DEBUG
-#define PRINT_PACKET(device, addr, size, header) do { \
- char *pkt_addr = (char*)(addr); \
- unsigned int index; \
- char packet[MAX_PRINT_BUFF]; \
- \
- if ((header)) \
- snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Header size %d: ", (device->device_fh), (size)); \
- else \
- snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Packet size %d: ", (device->device_fh), (size)); \
- for (index = 0; index < (size); index++) { \
- snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), \
- "%02hhx ", pkt_addr[index]); \
- } \
- snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), "\n"); \
- \
- LOG_DEBUG(VHOST_DATA, "%s", packet); \
-} while(0)
-#else
-#define PRINT_PACKET(device, addr, size, header) do{} while(0)
-#endif
-
-/*
- * Function to convert guest physical addresses to vhost virtual addresses. This
- * is used to convert virtio buffer addresses.
- */
-static inline uint64_t __attribute__((always_inline))
-gpa_to_vva(struct virtio_net *dev, uint64_t guest_pa)
-{
- struct virtio_memory_regions *region;
- uint32_t regionidx;
- uint64_t vhost_va = 0;
-
- for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
- region = &dev->mem->regions[regionidx];
- if ((guest_pa >= region->guest_phys_address) &&
- (guest_pa <= region->guest_phys_address_end)) {
- vhost_va = region->address_offset + guest_pa;
- break;
- }
- }
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| VVA %p\n",
- dev->device_fh, (void*)(uintptr_t)guest_pa, (void*)(uintptr_t)vhost_va);
-
- return vhost_va;
-}
-
-/*
- * Function to convert guest physical addresses to vhost physical addresses.
- * This is used to convert virtio buffer addresses.
- */
-static inline uint64_t __attribute__((always_inline))
-gpa_to_hpa(struct virtio_net *dev, uint64_t guest_pa,
- uint32_t buf_len, hpa_type *addr_type)
-{
- struct virtio_memory_regions_hpa *region;
- uint32_t regionidx;
- uint64_t vhost_pa = 0;
-
- *addr_type = PHYS_ADDR_INVALID;
-
- for (regionidx = 0; regionidx < dev->mem->nregions_hpa; regionidx++) {
- region = &dev->mem->regions_hpa[regionidx];
- if ((guest_pa >= region->guest_phys_address) &&
- (guest_pa <= region->guest_phys_address_end)) {
- vhost_pa = region->host_phys_addr_offset + guest_pa;
- if (likely((guest_pa + buf_len - 1)
- <= region->guest_phys_address_end))
- *addr_type = PHYS_ADDR_CONTINUOUS;
- else
- *addr_type = PHYS_ADDR_CROSS_SUBREG;
- break;
- }
- }
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| HPA %p\n",
- dev->device_fh, (void *)(uintptr_t)guest_pa,
- (void *)(uintptr_t)vhost_pa);
-
- return vhost_pa;
-}
-
-/*
- * This function adds buffers to the virtio devices RX virtqueue. Buffers can
- * be received from the physical port or from another virtio device. A packet
- * count is returned to indicate the number of packets that were succesfully
- * added to the RX queue. This function works when mergeable is disabled.
- */
-static inline uint32_t __attribute__((always_inline))
-virtio_dev_rx(struct virtio_net *dev, struct rte_mbuf **pkts, uint32_t count)
-{
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- struct rte_mbuf *buff;
- /* The virtio_hdr is initialised to 0. */
- struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {{0,0,0,0,0,0},0};
- uint64_t buff_addr = 0;
- uint64_t buff_hdr_addr = 0;
- uint32_t head[MAX_PKT_BURST], packet_len = 0;
- uint32_t head_idx, packet_success = 0;
- uint32_t retry = 0;
- uint16_t avail_idx, res_cur_idx;
- uint16_t res_base_idx, res_end_idx;
- uint16_t free_entries;
- uint8_t success = 0;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
- vq = dev->virtqueue[VIRTIO_RXQ];
- count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
-
- /* As many data cores may want access to available buffers, they need to be reserved. */
- do {
- res_base_idx = vq->last_used_idx_res;
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- free_entries = (avail_idx - res_base_idx);
- /* If retry is enabled and the queue is full then we wait and retry to avoid packet loss. */
- if (enable_retry && unlikely(count > free_entries)) {
- for (retry = 0; retry < burst_rx_retry_num; retry++) {
- rte_delay_us(burst_rx_delay_time);
- avail_idx =
- *((volatile uint16_t *)&vq->avail->idx);
- free_entries = (avail_idx - res_base_idx);
- if (count <= free_entries)
- break;
- }
- }
-
- /*check that we have enough buffers*/
- if (unlikely(count > free_entries))
- count = free_entries;
-
- if (count == 0)
- return 0;
-
- res_end_idx = res_base_idx + count;
- /* vq->last_used_idx_res is atomically updated. */
- success = rte_atomic16_cmpset(&vq->last_used_idx_res, res_base_idx,
- res_end_idx);
- } while (unlikely(success == 0));
- res_cur_idx = res_base_idx;
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n", dev->device_fh, res_cur_idx, res_end_idx);
-
- /* Prefetch available ring to retrieve indexes. */
- rte_prefetch0(&vq->avail->ring[res_cur_idx & (vq->size - 1)]);
-
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (head_idx = 0; head_idx < count; head_idx++)
- head[head_idx] = vq->avail->ring[(res_cur_idx + head_idx) & (vq->size - 1)];
-
- /*Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
-
- while (res_cur_idx != res_end_idx) {
- /* Get descriptor from available ring */
- desc = &vq->desc[head[packet_success]];
-
- buff = pkts[packet_success];
-
- /* Convert from gpa to vva (guest physical addr -> vhost virtual addr) */
- buff_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void*)(uintptr_t)buff_addr);
-
- /* Copy virtio_hdr to packet and increment buffer address */
- buff_hdr_addr = buff_addr;
- packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
-
- /*
- * If the descriptors are chained the header and data are
- * placed in separate buffers.
- */
- if (desc->flags & VRING_DESC_F_NEXT) {
- desc->len = vq->vhost_hlen;
- desc = &vq->desc[desc->next];
- /* Buffer address translation. */
- buff_addr = gpa_to_vva(dev, desc->addr);
- desc->len = rte_pktmbuf_data_len(buff);
- } else {
- buff_addr += vq->vhost_hlen;
- desc->len = packet_len;
- }
-
- /* Update used ring with desc information */
- vq->used->ring[res_cur_idx & (vq->size - 1)].id = head[packet_success];
- vq->used->ring[res_cur_idx & (vq->size - 1)].len = packet_len;
-
- /* Copy mbuf data to buffer */
- rte_memcpy((void *)(uintptr_t)buff_addr,
- (const void *)buff->pkt.data,
- rte_pktmbuf_data_len(buff));
- PRINT_PACKET(dev, (uintptr_t)buff_addr,
- rte_pktmbuf_data_len(buff), 0);
-
- res_cur_idx++;
- packet_success++;
-
- rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
- (const void *)&virtio_hdr, vq->vhost_hlen);
-
- PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
-
- if (res_cur_idx < res_end_idx) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- }
- }
-
- rte_compiler_barrier();
-
- /* Wait until it's our turn to add our buffer to the used ring. */
- while (unlikely(vq->last_used_idx != res_base_idx))
- rte_pause();
-
- *(volatile uint16_t *)&vq->used->idx += count;
- vq->last_used_idx = res_end_idx;
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
- return count;
-}
-
-static inline uint32_t __attribute__((always_inline))
-copy_from_mbuf_to_vring(struct virtio_net *dev,
- uint16_t res_base_idx, uint16_t res_end_idx,
- struct rte_mbuf *pkt)
-{
- uint32_t vec_idx = 0;
- uint32_t entry_success = 0;
- struct vhost_virtqueue *vq;
- /* The virtio_hdr is initialised to 0. */
- struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {
- {0, 0, 0, 0, 0, 0}, 0};
- uint16_t cur_idx = res_base_idx;
- uint64_t vb_addr = 0;
- uint64_t vb_hdr_addr = 0;
- uint32_t seg_offset = 0;
- uint32_t vb_offset = 0;
- uint32_t seg_avail;
- uint32_t vb_avail;
- uint32_t cpy_len, entry_len;
-
- if (pkt == NULL)
- return 0;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| "
- "End Index %d\n",
- dev->device_fh, cur_idx, res_end_idx);
-
- /*
- * Convert from gpa to vva
- * (guest physical addr -> vhost virtual addr)
- */
- vq = dev->virtqueue[VIRTIO_RXQ];
- vb_addr =
- gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
- vb_hdr_addr = vb_addr;
-
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
-
- virtio_hdr.num_buffers = res_end_idx - res_base_idx;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") RX: Num merge buffers %d\n",
- dev->device_fh, virtio_hdr.num_buffers);
-
- rte_memcpy((void *)(uintptr_t)vb_hdr_addr,
- (const void *)&virtio_hdr, vq->vhost_hlen);
-
- PRINT_PACKET(dev, (uintptr_t)vb_hdr_addr, vq->vhost_hlen, 1);
-
- seg_avail = rte_pktmbuf_data_len(pkt);
- vb_offset = vq->vhost_hlen;
- vb_avail =
- vq->buf_vec[vec_idx].buf_len - vq->vhost_hlen;
-
- entry_len = vq->vhost_hlen;
-
- if (vb_avail == 0) {
- uint32_t desc_idx =
- vq->buf_vec[vec_idx].desc_idx;
- vq->desc[desc_idx].len = vq->vhost_hlen;
-
- if ((vq->desc[desc_idx].flags
- & VRING_DESC_F_NEXT) == 0) {
- /* Update used ring with desc information */
- vq->used->ring[cur_idx & (vq->size - 1)].id
- = vq->buf_vec[vec_idx].desc_idx;
- vq->used->ring[cur_idx & (vq->size - 1)].len
- = entry_len;
-
- entry_len = 0;
- cur_idx++;
- entry_success++;
- }
-
- vec_idx++;
- vb_addr =
- gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
-
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
- vb_offset = 0;
- vb_avail = vq->buf_vec[vec_idx].buf_len;
- }
-
- cpy_len = RTE_MIN(vb_avail, seg_avail);
-
- while (cpy_len > 0) {
- /* Copy mbuf data to vring buffer */
- rte_memcpy((void *)(uintptr_t)(vb_addr + vb_offset),
- (const void *)(rte_pktmbuf_mtod(pkt, char*) + seg_offset),
- cpy_len);
-
- PRINT_PACKET(dev,
- (uintptr_t)(vb_addr + vb_offset),
- cpy_len, 0);
-
- seg_offset += cpy_len;
- vb_offset += cpy_len;
- seg_avail -= cpy_len;
- vb_avail -= cpy_len;
- entry_len += cpy_len;
-
- if (seg_avail != 0) {
- /*
- * The virtio buffer in this vring
- * entry reach to its end.
- * But the segment doesn't complete.
- */
- if ((vq->desc[vq->buf_vec[vec_idx].desc_idx].flags &
- VRING_DESC_F_NEXT) == 0) {
- /* Update used ring with desc information */
- vq->used->ring[cur_idx & (vq->size - 1)].id
- = vq->buf_vec[vec_idx].desc_idx;
- vq->used->ring[cur_idx & (vq->size - 1)].len
- = entry_len;
- entry_len = 0;
- cur_idx++;
- entry_success++;
- }
-
- vec_idx++;
- vb_addr = gpa_to_vva(dev,
- vq->buf_vec[vec_idx].buf_addr);
- vb_offset = 0;
- vb_avail = vq->buf_vec[vec_idx].buf_len;
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- } else {
- /*
- * This current segment complete, need continue to
- * check if the whole packet complete or not.
- */
- pkt = pkt->pkt.next;
- if (pkt != NULL) {
- /*
- * There are more segments.
- */
- if (vb_avail == 0) {
- /*
- * This current buffer from vring is
- * used up, need fetch next buffer
- * from buf_vec.
- */
- uint32_t desc_idx =
- vq->buf_vec[vec_idx].desc_idx;
- vq->desc[desc_idx].len = vb_offset;
-
- if ((vq->desc[desc_idx].flags &
- VRING_DESC_F_NEXT) == 0) {
- uint16_t wrapped_idx =
- cur_idx & (vq->size - 1);
- /*
- * Update used ring with the
- * descriptor information
- */
- vq->used->ring[wrapped_idx].id
- = desc_idx;
- vq->used->ring[wrapped_idx].len
- = entry_len;
- entry_success++;
- entry_len = 0;
- cur_idx++;
- }
-
- /* Get next buffer from buf_vec. */
- vec_idx++;
- vb_addr = gpa_to_vva(dev,
- vq->buf_vec[vec_idx].buf_addr);
- vb_avail =
- vq->buf_vec[vec_idx].buf_len;
- vb_offset = 0;
- }
-
- seg_offset = 0;
- seg_avail = rte_pktmbuf_data_len(pkt);
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- } else {
- /*
- * This whole packet completes.
- */
- uint32_t desc_idx =
- vq->buf_vec[vec_idx].desc_idx;
- vq->desc[desc_idx].len = vb_offset;
-
- while (vq->desc[desc_idx].flags &
- VRING_DESC_F_NEXT) {
- desc_idx = vq->desc[desc_idx].next;
- vq->desc[desc_idx].len = 0;
- }
-
- /* Update used ring with desc information */
- vq->used->ring[cur_idx & (vq->size - 1)].id
- = vq->buf_vec[vec_idx].desc_idx;
- vq->used->ring[cur_idx & (vq->size - 1)].len
- = entry_len;
- entry_len = 0;
- cur_idx++;
- entry_success++;
- seg_avail = 0;
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- }
- }
- }
-
- return entry_success;
-}
-
-/*
- * This function adds buffers to the virtio devices RX virtqueue. Buffers can
- * be received from the physical port or from another virtio device. A packet
- * count is returned to indicate the number of packets that were succesfully
- * added to the RX queue. This function works for mergeable RX.
- */
-static inline uint32_t __attribute__((always_inline))
-virtio_dev_merge_rx(struct virtio_net *dev, struct rte_mbuf **pkts,
- uint32_t count)
-{
- struct vhost_virtqueue *vq;
- uint32_t pkt_idx = 0, entry_success = 0;
- uint32_t retry = 0;
- uint16_t avail_idx, res_cur_idx;
- uint16_t res_base_idx, res_end_idx;
- uint8_t success = 0;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_rx()\n",
- dev->device_fh);
- vq = dev->virtqueue[VIRTIO_RXQ];
- count = RTE_MIN((uint32_t)MAX_PKT_BURST, count);
-
- if (count == 0)
- return 0;
-
- for (pkt_idx = 0; pkt_idx < count; pkt_idx++) {
- uint32_t secure_len = 0;
- uint16_t need_cnt;
- uint32_t vec_idx = 0;
- uint32_t pkt_len = pkts[pkt_idx]->pkt.pkt_len + vq->vhost_hlen;
- uint16_t i, id;
-
- do {
- /*
- * As many data cores may want access to available
- * buffers, they need to be reserved.
- */
- res_base_idx = vq->last_used_idx_res;
- res_cur_idx = res_base_idx;
-
- do {
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- if (unlikely(res_cur_idx == avail_idx)) {
- /*
- * If retry is enabled and the queue is
- * full then we wait and retry to avoid
- * packet loss.
- */
- if (enable_retry) {
- uint8_t cont = 0;
- for (retry = 0; retry < burst_rx_retry_num; retry++) {
- rte_delay_us(burst_rx_delay_time);
- avail_idx =
- *((volatile uint16_t *)&vq->avail->idx);
- if (likely(res_cur_idx != avail_idx)) {
- cont = 1;
- break;
- }
- }
- if (cont == 1)
- continue;
- }
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") Failed "
- "to get enough desc from "
- "vring\n",
- dev->device_fh);
- return pkt_idx;
- } else {
- uint16_t wrapped_idx =
- (res_cur_idx) & (vq->size - 1);
- uint32_t idx =
- vq->avail->ring[wrapped_idx];
- uint8_t next_desc;
-
- do {
- next_desc = 0;
- secure_len += vq->desc[idx].len;
- if (vq->desc[idx].flags &
- VRING_DESC_F_NEXT) {
- idx = vq->desc[idx].next;
- next_desc = 1;
- }
- } while (next_desc);
-
- res_cur_idx++;
- }
- } while (pkt_len > secure_len);
-
- /* vq->last_used_idx_res is atomically updated. */
- success = rte_atomic16_cmpset(&vq->last_used_idx_res,
- res_base_idx,
- res_cur_idx);
- } while (success == 0);
-
- id = res_base_idx;
- need_cnt = res_cur_idx - res_base_idx;
-
- for (i = 0; i < need_cnt; i++, id++) {
- uint16_t wrapped_idx = id & (vq->size - 1);
- uint32_t idx = vq->avail->ring[wrapped_idx];
- uint8_t next_desc;
- do {
- next_desc = 0;
- vq->buf_vec[vec_idx].buf_addr =
- vq->desc[idx].addr;
- vq->buf_vec[vec_idx].buf_len =
- vq->desc[idx].len;
- vq->buf_vec[vec_idx].desc_idx = idx;
- vec_idx++;
-
- if (vq->desc[idx].flags & VRING_DESC_F_NEXT) {
- idx = vq->desc[idx].next;
- next_desc = 1;
- }
- } while (next_desc);
- }
-
- res_end_idx = res_cur_idx;
-
- entry_success = copy_from_mbuf_to_vring(dev, res_base_idx,
- res_end_idx, pkts[pkt_idx]);
-
- rte_compiler_barrier();
-
- /*
- * Wait until it's our turn to add our buffer
- * to the used ring.
- */
- while (unlikely(vq->last_used_idx != res_base_idx))
- rte_pause();
-
- *(volatile uint16_t *)&vq->used->idx += entry_success;
- vq->last_used_idx = res_end_idx;
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
- }
-
- return count;
-}
-
-/*
- * Compares a packet destination MAC address to a device MAC address.
- */
-static inline int __attribute__((always_inline))
-ether_addr_cmp(struct ether_addr *ea, struct ether_addr *eb)
-{
- return (((*(uint64_t *)ea ^ *(uint64_t *)eb) & MAC_ADDR_CMP) == 0);
-}
-
-/*
- * This function learns the MAC address of the device and registers this along with a
- * vlan tag to a VMDQ.
- */
-static int
-link_vmdq(struct virtio_net *dev, struct rte_mbuf *m)
-{
- struct ether_hdr *pkt_hdr;
- struct virtio_net_data_ll *dev_ll;
- int i, ret;
-
- /* Learn MAC address of guest device from packet */
- pkt_hdr = (struct ether_hdr *)m->pkt.data;
-
- dev_ll = ll_root_used;
-
- while (dev_ll != NULL) {
- if (ether_addr_cmp(&(pkt_hdr->s_addr), &dev_ll->dev->mac_address)) {
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") WARNING: This device is using an existing MAC address and has not been registered.\n", dev->device_fh);
- return -1;
- }
- dev_ll = dev_ll->next;
- }
-
- for (i = 0; i < ETHER_ADDR_LEN; i++)
- dev->mac_address.addr_bytes[i] = pkt_hdr->s_addr.addr_bytes[i];
-
- /* vlan_tag currently uses the device_id. */
- dev->vlan_tag = vlan_tags[dev->device_fh];
-
- /* Print out VMDQ registration info. */
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") MAC_ADDRESS %02x:%02x:%02x:%02x:%02x:%02x and VLAN_TAG %d registered\n",
- dev->device_fh,
- dev->mac_address.addr_bytes[0], dev->mac_address.addr_bytes[1],
- dev->mac_address.addr_bytes[2], dev->mac_address.addr_bytes[3],
- dev->mac_address.addr_bytes[4], dev->mac_address.addr_bytes[5],
- dev->vlan_tag);
-
- /* Register the MAC address. */
- ret = rte_eth_dev_mac_addr_add(ports[0], &dev->mac_address, (uint32_t)dev->device_fh);
- if (ret)
- RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Failed to add device MAC address to VMDQ\n",
- dev->device_fh);
-
- /* Enable stripping of the vlan tag as we handle routing. */
- rte_eth_dev_set_vlan_strip_on_queue(ports[0], (uint16_t)dev->vmdq_rx_q, 1);
-
- /* Set device as ready for RX. */
- dev->ready = DEVICE_RX;
-
- return 0;
-}
-
-/*
- * Removes MAC address and vlan tag from VMDQ. Ensures that nothing is adding buffers to the RX
- * queue before disabling RX on the device.
- */
-static inline void
-unlink_vmdq(struct virtio_net *dev)
-{
- unsigned i = 0;
- unsigned rx_count;
- struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
-
- if (dev->ready == DEVICE_RX) {
- /*clear MAC and VLAN settings*/
- rte_eth_dev_mac_addr_remove(ports[0], &dev->mac_address);
- for (i = 0; i < 6; i++)
- dev->mac_address.addr_bytes[i] = 0;
-
- dev->vlan_tag = 0;
-
- /*Clear out the receive buffers*/
- rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
-
- while (rx_count) {
- for (i = 0; i < rx_count; i++)
- rte_pktmbuf_free(pkts_burst[i]);
-
- rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
- }
-
- dev->ready = DEVICE_MAC_LEARNING;
- }
-}
-
-/*
- * Check if the packet destination MAC address is for a local device. If so then put
- * the packet on that devices RX queue. If not then return.
- */
-static inline unsigned __attribute__((always_inline))
-virtio_tx_local(struct virtio_net *dev, struct rte_mbuf *m)
-{
- struct virtio_net_data_ll *dev_ll;
- struct ether_hdr *pkt_hdr;
- uint64_t ret = 0;
-
- pkt_hdr = (struct ether_hdr *)m->pkt.data;
-
- /*get the used devices list*/
- dev_ll = ll_root_used;
-
- while (dev_ll != NULL) {
- if ((dev_ll->dev->ready == DEVICE_RX) && ether_addr_cmp(&(pkt_hdr->d_addr),
- &dev_ll->dev->mac_address)) {
-
- /* Drop the packet if the TX packet is destined for the TX device. */
- if (dev_ll->dev->device_fh == dev->device_fh) {
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: Source and destination MAC addresses are the same. Dropping packet.\n",
- dev_ll->dev->device_fh);
- return 0;
- }
-
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is local\n", dev_ll->dev->device_fh);
-
- if (dev_ll->dev->remove) {
- /*drop the packet if the device is marked for removal*/
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Device is marked for removal\n", dev_ll->dev->device_fh);
- } else {
- uint32_t mergeable =
- dev_ll->dev->features &
- (1 << VIRTIO_NET_F_MRG_RXBUF);
-
- /*send the packet to the local virtio device*/
- if (likely(mergeable == 0))
- ret = virtio_dev_rx(dev_ll->dev, &m, 1);
- else
- ret = virtio_dev_merge_rx(dev_ll->dev,
- &m, 1);
-
- if (enable_stats) {
- rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_total_atomic,
- 1);
- rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_atomic,
- ret);
- dev_statistics[dev->device_fh].tx_total++;
- dev_statistics[dev->device_fh].tx += ret;
- }
- }
-
- return 0;
- }
- dev_ll = dev_ll->next;
- }
-
- return -1;
-}
-
-/*
- * This function routes the TX packet to the correct interface. This may be a local device
- * or the physical port.
- */
-static inline void __attribute__((always_inline))
-virtio_tx_route(struct virtio_net* dev, struct rte_mbuf *m, struct rte_mempool *mbuf_pool, uint16_t vlan_tag)
-{
- struct mbuf_table *tx_q;
- struct vlan_ethhdr *vlan_hdr;
- struct rte_mbuf **m_table;
- struct rte_mbuf *mbuf, *prev;
- unsigned len, ret, offset = 0;
- const uint16_t lcore_id = rte_lcore_id();
- struct virtio_net_data_ll *dev_ll = ll_root_used;
- struct ether_hdr *pkt_hdr = (struct ether_hdr *)m->pkt.data;
-
- /*check if destination is local VM*/
- if ((vm2vm_mode == VM2VM_SOFTWARE) && (virtio_tx_local(dev, m) == 0))
- return;
-
- if (vm2vm_mode == VM2VM_HARDWARE) {
- while (dev_ll != NULL) {
- if ((dev_ll->dev->ready == DEVICE_RX)
- && ether_addr_cmp(&(pkt_hdr->d_addr),
- &dev_ll->dev->mac_address)) {
- /*
- * Drop the packet if the TX packet is
- * destined for the TX device.
- */
- if (dev_ll->dev->device_fh == dev->device_fh) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") TX: Source and destination"
- " MAC addresses are the same. Dropping "
- "packet.\n",
- dev_ll->dev->device_fh);
- return;
- }
- offset = 4;
- vlan_tag =
- (uint16_t)
- vlan_tags[(uint16_t)dev_ll->dev->device_fh];
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") TX: pkt to local VM device id:"
- "(%"PRIu64") vlan tag: %d.\n",
- dev->device_fh, dev_ll->dev->device_fh,
- vlan_tag);
-
- break;
- }
- dev_ll = dev_ll->next;
- }
- }
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is external\n", dev->device_fh);
-
- /*Add packet to the port tx queue*/
- tx_q = &lcore_tx_queue[lcore_id];
- len = tx_q->len;
-
- /* Allocate an mbuf and populate the structure. */
- mbuf = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(mbuf == NULL)) {
- RTE_LOG(ERR, VHOST_DATA,
- "Failed to allocate memory for mbuf.\n");
- return;
- }
-
- mbuf->pkt.data_len = m->pkt.data_len + VLAN_HLEN + offset;
- mbuf->pkt.pkt_len = m->pkt.pkt_len + VLAN_HLEN + offset;
- mbuf->pkt.nb_segs = m->pkt.nb_segs;
-
- /* Copy ethernet header to mbuf. */
- rte_memcpy((void*)mbuf->pkt.data, (const void*)m->pkt.data, ETH_HLEN);
-
-
- /* Setup vlan header. Bytes need to be re-ordered for network with htons()*/
- vlan_hdr = (struct vlan_ethhdr *) mbuf->pkt.data;
- vlan_hdr->h_vlan_encapsulated_proto = vlan_hdr->h_vlan_proto;
- vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q);
- vlan_hdr->h_vlan_TCI = htons(vlan_tag);
-
- /* Copy the remaining packet contents to the mbuf. */
- rte_memcpy((void*) ((uint8_t*)mbuf->pkt.data + VLAN_ETH_HLEN),
- (const void*) ((uint8_t*)m->pkt.data + ETH_HLEN), (m->pkt.data_len - ETH_HLEN));
-
- /* Copy the remaining segments for the whole packet. */
- prev = mbuf;
- while (m->pkt.next) {
- /* Allocate an mbuf and populate the structure. */
- struct rte_mbuf *next_mbuf = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(next_mbuf == NULL)) {
- rte_pktmbuf_free(mbuf);
- RTE_LOG(ERR, VHOST_DATA,
- "Failed to allocate memory for mbuf.\n");
- return;
- }
-
- m = m->pkt.next;
- prev->pkt.next = next_mbuf;
- prev = next_mbuf;
- next_mbuf->pkt.data_len = m->pkt.data_len;
-
- /* Copy data to next mbuf. */
- rte_memcpy(rte_pktmbuf_mtod(next_mbuf, void *),
- rte_pktmbuf_mtod(m, const void *), m->pkt.data_len);
- }
-
- tx_q->m_table[len] = mbuf;
- len++;
- if (enable_stats) {
- dev_statistics[dev->device_fh].tx_total++;
- dev_statistics[dev->device_fh].tx++;
- }
-
- if (unlikely(len == MAX_PKT_BURST)) {
- m_table = (struct rte_mbuf **)tx_q->m_table;
- ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id, m_table, (uint16_t) len);
- /* Free any buffers not handled by TX and update the port stats. */
- if (unlikely(ret < len)) {
- do {
- rte_pktmbuf_free(m_table[ret]);
- } while (++ret < len);
- }
-
- len = 0;
- }
-
- tx_q->len = len;
- return;
-}
-
-static inline void __attribute__((always_inline))
-virtio_dev_tx(struct virtio_net* dev, struct rte_mempool *mbuf_pool)
-{
- struct rte_mbuf m;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- uint64_t buff_addr = 0;
- uint32_t head[MAX_PKT_BURST];
- uint32_t used_idx;
- uint32_t i;
- uint16_t free_entries, packet_success = 0;
- uint16_t avail_idx;
-
- vq = dev->virtqueue[VIRTIO_TXQ];
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- /* If there are no available buffers then return. */
- if (vq->last_used_idx == avail_idx)
- return;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
-
- /* Prefetch available ring to retrieve head indexes. */
- rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
-
- /*get the number of free entries in the ring*/
- free_entries = (avail_idx - vq->last_used_idx);
-
- /* Limit to MAX_PKT_BURST. */
- if (free_entries > MAX_PKT_BURST)
- free_entries = MAX_PKT_BURST;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n", dev->device_fh, free_entries);
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (i = 0; i < free_entries; i++)
- head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)];
-
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
-
- while (packet_success < free_entries) {
- desc = &vq->desc[head[packet_success]];
-
- /* Discard first buffer as it is the virtio header */
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- buff_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void*)(uintptr_t)buff_addr);
-
- used_idx = vq->last_used_idx & (vq->size - 1);
-
- if (packet_success < (free_entries - 1)) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success+1]]);
- rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]);
- }
-
- /* Update used index buffer information. */
- vq->used->ring[used_idx].id = head[packet_success];
- vq->used->ring[used_idx].len = 0;
-
- /* Setup dummy mbuf. This is copied to a real mbuf if transmitted out the physical port. */
- m.pkt.data_len = desc->len;
- m.pkt.pkt_len = desc->len;
- m.pkt.data = (void*)(uintptr_t)buff_addr;
-
- PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
-
- /* If this is the first received packet we need to learn the MAC and setup VMDQ */
- if (dev->ready == DEVICE_MAC_LEARNING) {
- if (dev->remove || (link_vmdq(dev, &m) == -1)) {
- /*discard frame if device is scheduled for removal or a duplicate MAC address is found. */
- packet_success += free_entries;
- vq->last_used_idx += packet_success;
- break;
- }
- }
- virtio_tx_route(dev, &m, mbuf_pool, (uint16_t)dev->device_fh);
-
- vq->last_used_idx++;
- packet_success++;
- }
-
- rte_compiler_barrier();
- vq->used->idx += packet_success;
- /* Kick guest if required. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-}
-
-/* This function works for TX packets with mergeable feature enabled. */
-static inline void __attribute__((always_inline))
-virtio_dev_merge_tx(struct virtio_net *dev, struct rte_mempool *mbuf_pool)
-{
- struct rte_mbuf *m, *prev;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- uint64_t vb_addr = 0;
- uint32_t head[MAX_PKT_BURST];
- uint32_t used_idx;
- uint32_t i;
- uint16_t free_entries, entry_success = 0;
- uint16_t avail_idx;
- uint32_t buf_size = MBUF_SIZE - (sizeof(struct rte_mbuf)
- + RTE_PKTMBUF_HEADROOM);
-
- vq = dev->virtqueue[VIRTIO_TXQ];
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- /* If there are no available buffers then return. */
- if (vq->last_used_idx == avail_idx)
- return;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_tx()\n",
- dev->device_fh);
-
- /* Prefetch available ring to retrieve head indexes. */
- rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
-
- /*get the number of free entries in the ring*/
- free_entries = (avail_idx - vq->last_used_idx);
-
- /* Limit to MAX_PKT_BURST. */
- free_entries = RTE_MIN(free_entries, MAX_PKT_BURST);
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n",
- dev->device_fh, free_entries);
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (i = 0; i < free_entries; i++)
- head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)];
-
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[entry_success]]);
- rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
-
- while (entry_success < free_entries) {
- uint32_t vb_avail, vb_offset;
- uint32_t seg_avail, seg_offset;
- uint32_t cpy_len;
- uint32_t seg_num = 0;
- struct rte_mbuf *cur;
- uint8_t alloc_err = 0;
-
- desc = &vq->desc[head[entry_success]];
-
- /* Discard first buffer as it is the virtio header */
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- vb_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
-
- used_idx = vq->last_used_idx & (vq->size - 1);
-
- if (entry_success < (free_entries - 1)) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[entry_success+1]]);
- rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]);
- }
-
- /* Update used index buffer information. */
- vq->used->ring[used_idx].id = head[entry_success];
- vq->used->ring[used_idx].len = 0;
-
- vb_offset = 0;
- vb_avail = desc->len;
- seg_offset = 0;
- seg_avail = buf_size;
- cpy_len = RTE_MIN(vb_avail, seg_avail);
-
- PRINT_PACKET(dev, (uintptr_t)vb_addr, desc->len, 0);
-
- /* Allocate an mbuf and populate the structure. */
- m = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(m == NULL)) {
- RTE_LOG(ERR, VHOST_DATA,
- "Failed to allocate memory for mbuf.\n");
- return;
- }
-
- seg_num++;
- cur = m;
- prev = m;
- while (cpy_len != 0) {
- rte_memcpy((void *)(rte_pktmbuf_mtod(cur, char *) + seg_offset),
- (void *)((uintptr_t)(vb_addr + vb_offset)),
- cpy_len);
-
- seg_offset += cpy_len;
- vb_offset += cpy_len;
- vb_avail -= cpy_len;
- seg_avail -= cpy_len;
-
- if (vb_avail != 0) {
- /*
- * The segment reachs to its end,
- * while the virtio buffer in TX vring has
- * more data to be copied.
- */
- cur->pkt.data_len = seg_offset;
- m->pkt.pkt_len += seg_offset;
- /* Allocate mbuf and populate the structure. */
- cur = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(cur == NULL)) {
- RTE_LOG(ERR, VHOST_DATA, "Failed to "
- "allocate memory for mbuf.\n");
- rte_pktmbuf_free(m);
- alloc_err = 1;
- break;
- }
-
- seg_num++;
- prev->pkt.next = cur;
- prev = cur;
- seg_offset = 0;
- seg_avail = buf_size;
- } else {
- if (desc->flags & VRING_DESC_F_NEXT) {
- /*
- * There are more virtio buffers in
- * same vring entry need to be copied.
- */
- if (seg_avail == 0) {
- /*
- * The current segment hasn't
- * room to accomodate more
- * data.
- */
- cur->pkt.data_len = seg_offset;
- m->pkt.pkt_len += seg_offset;
- /*
- * Allocate an mbuf and
- * populate the structure.
- */
- cur = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(cur == NULL)) {
- RTE_LOG(ERR,
- VHOST_DATA,
- "Failed to "
- "allocate memory "
- "for mbuf\n");
- rte_pktmbuf_free(m);
- alloc_err = 1;
- break;
- }
- seg_num++;
- prev->pkt.next = cur;
- prev = cur;
- seg_offset = 0;
- seg_avail = buf_size;
- }
-
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- vb_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
- vb_offset = 0;
- vb_avail = desc->len;
-
- PRINT_PACKET(dev, (uintptr_t)vb_addr,
- desc->len, 0);
- } else {
- /* The whole packet completes. */
- cur->pkt.data_len = seg_offset;
- m->pkt.pkt_len += seg_offset;
- vb_avail = 0;
- }
- }
-
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- }
-
- if (unlikely(alloc_err == 1))
- break;
-
- m->pkt.nb_segs = seg_num;
-
- /*
- * If this is the first received packet we need to learn
- * the MAC and setup VMDQ
- */
- if (dev->ready == DEVICE_MAC_LEARNING) {
- if (dev->remove || (link_vmdq(dev, m) == -1)) {
- /*
- * Discard frame if device is scheduled for
- * removal or a duplicate MAC address is found.
- */
- entry_success = free_entries;
- vq->last_used_idx += entry_success;
- rte_pktmbuf_free(m);
- break;
- }
- }
-
- virtio_tx_route(dev, m, mbuf_pool, (uint16_t)dev->device_fh);
- vq->last_used_idx++;
- entry_success++;
- rte_pktmbuf_free(m);
- }
-
- rte_compiler_barrier();
- vq->used->idx += entry_success;
- /* Kick guest if required. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-
-}
-
-/*
- * This function is called by each data core. It handles all RX/TX registered with the
- * core. For TX the specific lcore linked list is used. For RX, MAC addresses are compared
- * with all devices in the main linked list.
- */
-static int
-switch_worker(__attribute__((unused)) void *arg)
-{
- struct rte_mempool *mbuf_pool = arg;
- struct virtio_net *dev = NULL;
- struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
- struct virtio_net_data_ll *dev_ll;
- struct mbuf_table *tx_q;
- volatile struct lcore_ll_info *lcore_ll;
- const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
- uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
- unsigned ret, i;
- const uint16_t lcore_id = rte_lcore_id();
- const uint16_t num_cores = (uint16_t)rte_lcore_count();
- uint16_t rx_count = 0;
- uint32_t mergeable = 0;
-
- RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
- lcore_ll = lcore_info[lcore_id].lcore_ll;
- prev_tsc = 0;
-
- tx_q = &lcore_tx_queue[lcore_id];
- for (i = 0; i < num_cores; i ++) {
- if (lcore_ids[i] == lcore_id) {
- tx_q->txq_id = i;
- break;
- }
- }
-
- while(1) {
- cur_tsc = rte_rdtsc();
- /*
- * TX burst queue drain
- */
- diff_tsc = cur_tsc - prev_tsc;
- if (unlikely(diff_tsc > drain_tsc)) {
-
- if (tx_q->len) {
- LOG_DEBUG(VHOST_DATA, "TX queue drained after timeout with burst size %u \n", tx_q->len);
-
- /*Tx any packets in the queue*/
- ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id,
- (struct rte_mbuf **)tx_q->m_table,
- (uint16_t)tx_q->len);
- if (unlikely(ret < tx_q->len)) {
- do {
- rte_pktmbuf_free(tx_q->m_table[ret]);
- } while (++ret < tx_q->len);
- }
-
- tx_q->len = 0;
- }
-
- prev_tsc = cur_tsc;
-
- }
-
- rte_prefetch0(lcore_ll->ll_root_used);
- /*
- * Inform the configuration core that we have exited the linked list and that no devices are
- * in use if requested.
- */
- if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
- lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
-
- /*
- * Process devices
- */
- dev_ll = lcore_ll->ll_root_used;
-
- while (dev_ll != NULL) {
- /*get virtio device ID*/
- dev = dev_ll->dev;
- mergeable =
- dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF);
-
- if (dev->remove) {
- dev_ll = dev_ll->next;
- unlink_vmdq(dev);
- dev->ready = DEVICE_SAFE_REMOVE;
- continue;
- }
- if (likely(dev->ready == DEVICE_RX)) {
- /*Handle guest RX*/
- rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
-
- if (rx_count) {
- if (likely(mergeable == 0))
- ret_count =
- virtio_dev_rx(dev,
- pkts_burst, rx_count);
- else
- ret_count =
- virtio_dev_merge_rx(dev,
- pkts_burst, rx_count);
-
- if (enable_stats) {
- rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_total_atomic,
- rx_count);
- rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_atomic, ret_count);
- }
- while (likely(rx_count)) {
- rx_count--;
- rte_pktmbuf_free(pkts_burst[rx_count]);
- }
-
- }
- }
-
- if (!dev->remove) {
- /*Handle guest TX*/
- if (likely(mergeable == 0))
- virtio_dev_tx(dev, mbuf_pool);
- else
- virtio_dev_merge_tx(dev, mbuf_pool);
- }
-
- /*move to the next device in the list*/
- dev_ll = dev_ll->next;
- }
- }
-
- return 0;
-}
-
-/*
- * This function gets available ring number for zero copy rx.
- * Only one thread will call this funciton for a paticular virtio device,
- * so, it is designed as non-thread-safe function.
- */
-static inline uint32_t __attribute__((always_inline))
-get_available_ring_num_zcp(struct virtio_net *dev)
-{
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ];
- uint16_t avail_idx;
-
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- return (uint32_t)(avail_idx - vq->last_used_idx_res);
-}
-
-/*
- * This function gets available ring index for zero copy rx,
- * it will retry 'burst_rx_retry_num' times till it get enough ring index.
- * Only one thread will call this funciton for a paticular virtio device,
- * so, it is designed as non-thread-safe function.
- */
-static inline uint32_t __attribute__((always_inline))
-get_available_ring_index_zcp(struct virtio_net *dev,
- uint16_t *res_base_idx, uint32_t count)
-{
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ];
- uint16_t avail_idx;
- uint32_t retry = 0;
- uint16_t free_entries;
-
- *res_base_idx = vq->last_used_idx_res;
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- free_entries = (avail_idx - *res_base_idx);
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") in get_available_ring_index_zcp: "
- "avail idx: %d, "
- "res base idx:%d, free entries:%d\n",
- dev->device_fh, avail_idx, *res_base_idx,
- free_entries);
-
- /*
- * If retry is enabled and the queue is full then we wait
- * and retry to avoid packet loss.
- */
- if (enable_retry && unlikely(count > free_entries)) {
- for (retry = 0; retry < burst_rx_retry_num; retry++) {
- rte_delay_us(burst_rx_delay_time);
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- free_entries = (avail_idx - *res_base_idx);
- if (count <= free_entries)
- break;
- }
- }
-
- /*check that we have enough buffers*/
- if (unlikely(count > free_entries))
- count = free_entries;
-
- if (unlikely(count == 0)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") Fail in get_available_ring_index_zcp: "
- "avail idx: %d, res base idx:%d, free entries:%d\n",
- dev->device_fh, avail_idx,
- *res_base_idx, free_entries);
- return 0;
- }
-
- vq->last_used_idx_res = *res_base_idx + count;
-
- return count;
-}
-
-/*
- * This function put descriptor back to used list.
- */
-static inline void __attribute__((always_inline))
-put_desc_to_used_list_zcp(struct vhost_virtqueue *vq, uint16_t desc_idx)
-{
- uint16_t res_cur_idx = vq->last_used_idx;
- vq->used->ring[res_cur_idx & (vq->size - 1)].id = (uint32_t)desc_idx;
- vq->used->ring[res_cur_idx & (vq->size - 1)].len = 0;
- rte_compiler_barrier();
- *(volatile uint16_t *)&vq->used->idx += 1;
- vq->last_used_idx += 1;
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-}
-
-/*
- * This function get available descriptor from vitio vring and un-attached mbuf
- * from vpool->ring, and then attach them together. It needs adjust the offset
- * for buff_addr and phys_addr accroding to PMD implementation, otherwise the
- * frame data may be put to wrong location in mbuf.
- */
-static inline void __attribute__((always_inline))
-attach_rxmbuf_zcp(struct virtio_net *dev)
-{
- uint16_t res_base_idx, desc_idx;
- uint64_t buff_addr, phys_addr;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- struct rte_mbuf *mbuf = NULL;
- struct vpool *vpool;
- hpa_type addr_type;
-
- vpool = &vpool_array[dev->vmdq_rx_q];
- vq = dev->virtqueue[VIRTIO_RXQ];
-
- do {
- if (unlikely(get_available_ring_index_zcp(dev, &res_base_idx,
- 1) != 1))
- return;
- desc_idx = vq->avail->ring[(res_base_idx) & (vq->size - 1)];
-
- desc = &vq->desc[desc_idx];
- if (desc->flags & VRING_DESC_F_NEXT) {
- desc = &vq->desc[desc->next];
- buff_addr = gpa_to_vva(dev, desc->addr);
- phys_addr = gpa_to_hpa(dev, desc->addr, desc->len,
- &addr_type);
- } else {
- buff_addr = gpa_to_vva(dev,
- desc->addr + vq->vhost_hlen);
- phys_addr = gpa_to_hpa(dev,
- desc->addr + vq->vhost_hlen,
- desc->len, &addr_type);
- }
-
- if (unlikely(addr_type == PHYS_ADDR_INVALID)) {
- RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Invalid frame buffer"
- " address found when attaching RX frame buffer"
- " address!\n", dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- continue;
- }
-
- /*
- * Check if the frame buffer address from guest crosses
- * sub-region or not.
- */
- if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) {
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Frame buffer address cross "
- "sub-regioin found when attaching RX frame "
- "buffer address!\n",
- dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- continue;
- }
- } while (unlikely(phys_addr == 0));
-
- rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf);
- if (unlikely(mbuf == NULL)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in attach_rxmbuf_zcp: "
- "ring_sc_dequeue fail.\n",
- dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- return;
- }
-
- if (unlikely(vpool->buf_size > desc->len)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in attach_rxmbuf_zcp: frame buffer "
- "length(%d) of descriptor idx: %d less than room "
- "size required: %d\n",
- dev->device_fh, desc->len, desc_idx, vpool->buf_size);
- put_desc_to_used_list_zcp(vq, desc_idx);
- rte_ring_sp_enqueue(vpool->ring, (void *)mbuf);
- return;
- }
-
- mbuf->buf_addr = (void *)(uintptr_t)(buff_addr - RTE_PKTMBUF_HEADROOM);
- mbuf->pkt.data = (void *)(uintptr_t)(buff_addr);
- mbuf->buf_physaddr = phys_addr - RTE_PKTMBUF_HEADROOM;
- mbuf->pkt.data_len = desc->len;
- MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in attach_rxmbuf_zcp: res base idx:%d, "
- "descriptor idx:%d\n",
- dev->device_fh, res_base_idx, desc_idx);
-
- __rte_mbuf_raw_free(mbuf);
-
- return;
-}
-
-/*
- * Detach an attched packet mbuf -
- * - restore original mbuf address and length values.
- * - reset pktmbuf data and data_len to their default values.
- * All other fields of the given packet mbuf will be left intact.
- *
- * @param m
- * The attached packet mbuf.
- */
-static inline void pktmbuf_detach_zcp(struct rte_mbuf *m)
-{
- const struct rte_mempool *mp = m->pool;
- void *buf = RTE_MBUF_TO_BADDR(m);
- uint32_t buf_ofs;
- uint32_t buf_len = mp->elt_size - sizeof(*m);
- m->buf_physaddr = rte_mempool_virt2phy(mp, m) + sizeof(*m);
-
- m->buf_addr = buf;
- m->buf_len = (uint16_t)buf_len;
-
- buf_ofs = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
- RTE_PKTMBUF_HEADROOM : m->buf_len;
- m->pkt.data = (char *) m->buf_addr + buf_ofs;
-
- m->pkt.data_len = 0;
-}
-
-/*
- * This function is called after packets have been transimited. It fetchs mbuf
- * from vpool->pool, detached it and put into vpool->ring. It also update the
- * used index and kick the guest if necessary.
- */
-static inline uint32_t __attribute__((always_inline))
-txmbuf_clean_zcp(struct virtio_net *dev, struct vpool *vpool)
-{
- struct rte_mbuf *mbuf;
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
- uint32_t used_idx = vq->last_used_idx & (vq->size - 1);
- uint32_t index = 0;
- uint32_t mbuf_count = rte_mempool_count(vpool->pool);
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool before "
- "clean is: %d\n",
- dev->device_fh, mbuf_count);
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring before "
- "clean is : %d\n",
- dev->device_fh, rte_ring_count(vpool->ring));
-
- for (index = 0; index < mbuf_count; index++) {
- mbuf = __rte_mbuf_raw_alloc(vpool->pool);
- if (likely(RTE_MBUF_INDIRECT(mbuf)))
- pktmbuf_detach_zcp(mbuf);
- rte_ring_sp_enqueue(vpool->ring, mbuf);
-
- /* Update used index buffer information. */
- vq->used->ring[used_idx].id = MBUF_HEADROOM_UINT32(mbuf);
- vq->used->ring[used_idx].len = 0;
-
- used_idx = (used_idx + 1) & (vq->size - 1);
- }
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool after "
- "clean is: %d\n",
- dev->device_fh, rte_mempool_count(vpool->pool));
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring after "
- "clean is : %d\n",
- dev->device_fh, rte_ring_count(vpool->ring));
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: before updated "
- "vq->last_used_idx:%d\n",
- dev->device_fh, vq->last_used_idx);
-
- vq->last_used_idx += mbuf_count;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: after updated "
- "vq->last_used_idx:%d\n",
- dev->device_fh, vq->last_used_idx);
-
- rte_compiler_barrier();
-
- *(volatile uint16_t *)&vq->used->idx += mbuf_count;
-
- /* Kick guest if required. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-
- return 0;
-}
-
-/*
- * This function is called when a virtio device is destroy.
- * It fetchs mbuf from vpool->pool, and detached it, and put into vpool->ring.
- */
-static void mbuf_destroy_zcp(struct vpool *vpool)
-{
- struct rte_mbuf *mbuf = NULL;
- uint32_t index, mbuf_count = rte_mempool_count(vpool->pool);
-
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in mempool before "
- "mbuf_destroy_zcp is: %d\n",
- mbuf_count);
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in ring before "
- "mbuf_destroy_zcp is : %d\n",
- rte_ring_count(vpool->ring));
-
- for (index = 0; index < mbuf_count; index++) {
- mbuf = __rte_mbuf_raw_alloc(vpool->pool);
- if (likely(mbuf != NULL)) {
- if (likely(RTE_MBUF_INDIRECT(mbuf)))
- pktmbuf_detach_zcp(mbuf);
- rte_ring_sp_enqueue(vpool->ring, (void *)mbuf);
- }
- }
-
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in mempool after "
- "mbuf_destroy_zcp is: %d\n",
- rte_mempool_count(vpool->pool));
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in ring after "
- "mbuf_destroy_zcp is : %d\n",
- rte_ring_count(vpool->ring));
-}
-
-/*
- * This function update the use flag and counter.
- */
-static inline uint32_t __attribute__((always_inline))
-virtio_dev_rx_zcp(struct virtio_net *dev, struct rte_mbuf **pkts,
- uint32_t count)
-{
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- struct rte_mbuf *buff;
- /* The virtio_hdr is initialised to 0. */
- struct virtio_net_hdr_mrg_rxbuf virtio_hdr
- = {{0, 0, 0, 0, 0, 0}, 0};
- uint64_t buff_hdr_addr = 0;
- uint32_t head[MAX_PKT_BURST], packet_len = 0;
- uint32_t head_idx, packet_success = 0;
- uint16_t res_cur_idx;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
-
- if (count == 0)
- return 0;
-
- vq = dev->virtqueue[VIRTIO_RXQ];
- count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
-
- res_cur_idx = vq->last_used_idx;
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n",
- dev->device_fh, res_cur_idx, res_cur_idx + count);
-
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (head_idx = 0; head_idx < count; head_idx++)
- head[head_idx] = MBUF_HEADROOM_UINT32(pkts[head_idx]);
-
- /*Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
-
- while (packet_success != count) {
- /* Get descriptor from available ring */
- desc = &vq->desc[head[packet_success]];
-
- buff = pkts[packet_success];
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in dev_rx_zcp: update the used idx for "
- "pkt[%d] descriptor idx: %d\n",
- dev->device_fh, packet_success,
- MBUF_HEADROOM_UINT32(buff));
-
- PRINT_PACKET(dev,
- (uintptr_t)(((uint64_t)(uintptr_t)buff->buf_addr)
- + RTE_PKTMBUF_HEADROOM),
- rte_pktmbuf_data_len(buff), 0);
-
- /* Buffer address translation for virtio header. */
- buff_hdr_addr = gpa_to_vva(dev, desc->addr);
- packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
-
- /*
- * If the descriptors are chained the header and data are
- * placed in separate buffers.
- */
- if (desc->flags & VRING_DESC_F_NEXT) {
- desc->len = vq->vhost_hlen;
- desc = &vq->desc[desc->next];
- desc->len = rte_pktmbuf_data_len(buff);
- } else {
- desc->len = packet_len;
- }
-
- /* Update used ring with desc information */
- vq->used->ring[res_cur_idx & (vq->size - 1)].id
- = head[packet_success];
- vq->used->ring[res_cur_idx & (vq->size - 1)].len
- = packet_len;
- res_cur_idx++;
- packet_success++;
-
- /* A header is required per buffer. */
- rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
- (const void *)&virtio_hdr, vq->vhost_hlen);
-
- PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
-
- if (likely(packet_success < count)) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- }
- }
-
- rte_compiler_barrier();
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in dev_rx_zcp: before update used idx: "
- "vq.last_used_idx: %d, vq->used->idx: %d\n",
- dev->device_fh, vq->last_used_idx, vq->used->idx);
-
- *(volatile uint16_t *)&vq->used->idx += count;
- vq->last_used_idx += count;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in dev_rx_zcp: after update used idx: "
- "vq.last_used_idx: %d, vq->used->idx: %d\n",
- dev->device_fh, vq->last_used_idx, vq->used->idx);
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-
- return count;
-}
-
-/*
- * This function routes the TX packet to the correct interface.
- * This may be a local device or the physical port.
- */
-static inline void __attribute__((always_inline))
-virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m,
- uint32_t desc_idx, uint8_t need_copy)
-{
- struct mbuf_table *tx_q;
- struct rte_mbuf **m_table;
- struct rte_mbuf *mbuf = NULL;
- unsigned len, ret, offset = 0;
- struct vpool *vpool;
- struct virtio_net_data_ll *dev_ll = ll_root_used;
- struct ether_hdr *pkt_hdr = (struct ether_hdr *)m->pkt.data;
- uint16_t vlan_tag = (uint16_t)vlan_tags[(uint16_t)dev->device_fh];
-
- /*Add packet to the port tx queue*/
- tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
- len = tx_q->len;
-
- /* Allocate an mbuf and populate the structure. */
- vpool = &vpool_array[MAX_QUEUES + (uint16_t)dev->vmdq_rx_q];
- rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf);
- if (unlikely(mbuf == NULL)) {
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Failed to allocate memory for mbuf.\n",
- dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- return;
- }
-
- if (vm2vm_mode == VM2VM_HARDWARE) {
- /* Avoid using a vlan tag from any vm for external pkt, such as
- * vlan_tags[dev->device_fh], oterwise, it conflicts when pool
- * selection, MAC address determines it as an external pkt
- * which should go to network, while vlan tag determine it as
- * a vm2vm pkt should forward to another vm. Hardware confuse
- * such a ambiguous situation, so pkt will lost.
- */
- vlan_tag = external_pkt_default_vlan_tag;
- while (dev_ll != NULL) {
- if (likely(dev_ll->dev->ready == DEVICE_RX) &&
- ether_addr_cmp(&(pkt_hdr->d_addr),
- &dev_ll->dev->mac_address)) {
-
- /*
- * Drop the packet if the TX packet is destined
- * for the TX device.
- */
- if (unlikely(dev_ll->dev->device_fh
- == dev->device_fh)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") TX: Source and destination"
- "MAC addresses are the same. Dropping "
- "packet.\n",
- dev_ll->dev->device_fh);
- MBUF_HEADROOM_UINT32(mbuf)
- = (uint32_t)desc_idx;
- __rte_mbuf_raw_free(mbuf);
- return;
- }
-
- /*
- * Packet length offset 4 bytes for HW vlan
- * strip when L2 switch back.
- */
- offset = 4;
- vlan_tag =
- (uint16_t)
- vlan_tags[(uint16_t)dev_ll->dev->device_fh];
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") TX: pkt to local VM device id:"
- "(%"PRIu64") vlan tag: %d.\n",
- dev->device_fh, dev_ll->dev->device_fh,
- vlan_tag);
-
- break;
- }
- dev_ll = dev_ll->next;
- }
- }
-
- mbuf->pkt.nb_segs = m->pkt.nb_segs;
- mbuf->pkt.next = m->pkt.next;
- mbuf->pkt.data_len = m->pkt.data_len + offset;
- mbuf->pkt.pkt_len = mbuf->pkt.data_len;
- if (unlikely(need_copy)) {
- /* Copy the packet contents to the mbuf. */
- rte_memcpy((void *)((uint8_t *)mbuf->pkt.data),
- (const void *) ((uint8_t *)m->pkt.data),
- m->pkt.data_len);
- } else {
- mbuf->pkt.data = m->pkt.data;
- mbuf->buf_physaddr = m->buf_physaddr;
- mbuf->buf_addr = m->buf_addr;
- }
- mbuf->ol_flags = PKT_TX_VLAN_PKT;
- mbuf->pkt.vlan_macip.f.vlan_tci = vlan_tag;
- mbuf->pkt.vlan_macip.f.l2_len = sizeof(struct ether_hdr);
- mbuf->pkt.vlan_macip.f.l3_len = sizeof(struct ipv4_hdr);
- MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
-
- tx_q->m_table[len] = mbuf;
- len++;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in tx_route_zcp: pkt: nb_seg: %d, next:%s\n",
- dev->device_fh,
- mbuf->pkt.nb_segs,
- (mbuf->pkt.next == NULL) ? "null" : "non-null");
-
- if (enable_stats) {
- dev_statistics[dev->device_fh].tx_total++;
- dev_statistics[dev->device_fh].tx++;
- }
-
- if (unlikely(len == MAX_PKT_BURST)) {
- m_table = (struct rte_mbuf **)tx_q->m_table;
- ret = rte_eth_tx_burst(ports[0],
- (uint16_t)tx_q->txq_id, m_table, (uint16_t) len);
-
- /*
- * Free any buffers not handled by TX and update
- * the port stats.
- */
- if (unlikely(ret < len)) {
- do {
- rte_pktmbuf_free(m_table[ret]);
- } while (++ret < len);
- }
-
- len = 0;
- txmbuf_clean_zcp(dev, vpool);
- }
-
- tx_q->len = len;
-
- return;
-}
-
-/*
- * This function TX all available packets in virtio TX queue for one
- * virtio-net device. If it is first packet, it learns MAC address and
- * setup VMDQ.
- */
-static inline void __attribute__((always_inline))
-virtio_dev_tx_zcp(struct virtio_net *dev)
-{
- struct rte_mbuf m;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- uint64_t buff_addr = 0, phys_addr;
- uint32_t head[MAX_PKT_BURST];
- uint32_t i;
- uint16_t free_entries, packet_success = 0;
- uint16_t avail_idx;
- uint8_t need_copy = 0;
- hpa_type addr_type;
-
- vq = dev->virtqueue[VIRTIO_TXQ];
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- /* If there are no available buffers then return. */
- if (vq->last_used_idx_res == avail_idx)
- return;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
-
- /* Prefetch available ring to retrieve head indexes. */
- rte_prefetch0(&vq->avail->ring[vq->last_used_idx_res & (vq->size - 1)]);
-
- /* Get the number of free entries in the ring */
- free_entries = (avail_idx - vq->last_used_idx_res);
-
- /* Limit to MAX_PKT_BURST. */
- free_entries
- = (free_entries > MAX_PKT_BURST) ? MAX_PKT_BURST : free_entries;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n",
- dev->device_fh, free_entries);
-
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (i = 0; i < free_entries; i++)
- head[i]
- = vq->avail->ring[(vq->last_used_idx_res + i)
- & (vq->size - 1)];
-
- vq->last_used_idx_res += free_entries;
-
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
-
- while (packet_success < free_entries) {
- desc = &vq->desc[head[packet_success]];
-
- /* Discard first buffer as it is the virtio header */
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- buff_addr = gpa_to_vva(dev, desc->addr);
- phys_addr = gpa_to_hpa(dev, desc->addr, desc->len, &addr_type);
-
- if (likely(packet_success < (free_entries - 1)))
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success + 1]]);
-
- if (unlikely(addr_type == PHYS_ADDR_INVALID)) {
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Invalid frame buffer address found"
- "when TX packets!\n",
- dev->device_fh);
- packet_success++;
- continue;
- }
-
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)buff_addr);
-
- /*
- * Setup dummy mbuf. This is copied to a real mbuf if
- * transmitted out the physical port.
- */
- m.pkt.data_len = desc->len;
- m.pkt.nb_segs = 1;
- m.pkt.next = NULL;
- m.pkt.data = (void *)(uintptr_t)buff_addr;
- m.buf_addr = m.pkt.data;
- m.buf_physaddr = phys_addr;
-
- /*
- * Check if the frame buffer address from guest crosses
- * sub-region or not.
- */
- if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) {
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Frame buffer address cross "
- "sub-regioin found when attaching TX frame "
- "buffer address!\n",
- dev->device_fh);
- need_copy = 1;
- } else
- need_copy = 0;
-
- PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
-
- /*
- * If this is the first received packet we need to learn
- * the MAC and setup VMDQ
- */
- if (unlikely(dev->ready == DEVICE_MAC_LEARNING)) {
- if (dev->remove || (link_vmdq(dev, &m) == -1)) {
- /*
- * Discard frame if device is scheduled for
- * removal or a duplicate MAC address is found.
- */
- packet_success += free_entries;
- vq->last_used_idx += packet_success;
- break;
- }
- }
-
- virtio_tx_route_zcp(dev, &m, head[packet_success], need_copy);
- packet_success++;
- }
-}
-
-/*
- * This function is called by each data core. It handles all RX/TX registered
- * with the core. For TX the specific lcore linked list is used. For RX, MAC
- * addresses are compared with all devices in the main linked list.
- */
-static int
-switch_worker_zcp(__attribute__((unused)) void *arg)
-{
- struct virtio_net *dev = NULL;
- struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
- struct virtio_net_data_ll *dev_ll;
- struct mbuf_table *tx_q;
- volatile struct lcore_ll_info *lcore_ll;
- const uint64_t drain_tsc
- = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S
- * BURST_TX_DRAIN_US;
- uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
- unsigned ret;
- const uint16_t lcore_id = rte_lcore_id();
- uint16_t count_in_ring, rx_count = 0;
-
- RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
-
- lcore_ll = lcore_info[lcore_id].lcore_ll;
- prev_tsc = 0;
-
- while (1) {
- cur_tsc = rte_rdtsc();
-
- /* TX burst queue drain */
- diff_tsc = cur_tsc - prev_tsc;
- if (unlikely(diff_tsc > drain_tsc)) {
- /*
- * Get mbuf from vpool.pool and detach mbuf and
- * put back into vpool.ring.
- */
- dev_ll = lcore_ll->ll_root_used;
- while ((dev_ll != NULL) && (dev_ll->dev != NULL)) {
- /* Get virtio device ID */
- dev = dev_ll->dev;
-
- if (likely(!dev->remove)) {
- tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
- if (tx_q->len) {
- LOG_DEBUG(VHOST_DATA,
- "TX queue drained after timeout"
- " with burst size %u\n",
- tx_q->len);
-
- /*
- * Tx any packets in the queue
- */
- ret = rte_eth_tx_burst(
- ports[0],
- (uint16_t)tx_q->txq_id,
- (struct rte_mbuf **)
- tx_q->m_table,
- (uint16_t)tx_q->len);
- if (unlikely(ret < tx_q->len)) {
- do {
- rte_pktmbuf_free(
- tx_q->m_table[ret]);
- } while (++ret < tx_q->len);
- }
- tx_q->len = 0;
-
- txmbuf_clean_zcp(dev,
- &vpool_array[MAX_QUEUES+dev->vmdq_rx_q]);
- }
- }
- dev_ll = dev_ll->next;
- }
- prev_tsc = cur_tsc;
- }
-
- rte_prefetch0(lcore_ll->ll_root_used);
-
- /*
- * Inform the configuration core that we have exited the linked
- * list and that no devices are in use if requested.
- */
- if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
- lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
-
- /* Process devices */
- dev_ll = lcore_ll->ll_root_used;
-
- while ((dev_ll != NULL) && (dev_ll->dev != NULL)) {
- dev = dev_ll->dev;
- if (unlikely(dev->remove)) {
- dev_ll = dev_ll->next;
- unlink_vmdq(dev);
- dev->ready = DEVICE_SAFE_REMOVE;
- continue;
- }
-
- if (likely(dev->ready == DEVICE_RX)) {
- uint32_t index = dev->vmdq_rx_q;
- uint16_t i;
- count_in_ring
- = rte_ring_count(vpool_array[index].ring);
- uint16_t free_entries
- = (uint16_t)get_available_ring_num_zcp(dev);
-
- /*
- * Attach all mbufs in vpool.ring and put back
- * into vpool.pool.
- */
- for (i = 0;
- i < RTE_MIN(free_entries,
- RTE_MIN(count_in_ring, MAX_PKT_BURST));
- i++)
- attach_rxmbuf_zcp(dev);
-
- /* Handle guest RX */
- rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst,
- MAX_PKT_BURST);
-
- if (rx_count) {
- ret_count = virtio_dev_rx_zcp(dev,
- pkts_burst, rx_count);
- if (enable_stats) {
- dev_statistics[dev->device_fh].rx_total
- += rx_count;
- dev_statistics[dev->device_fh].rx
- += ret_count;
- }
- while (likely(rx_count)) {
- rx_count--;
- pktmbuf_detach_zcp(
- pkts_burst[rx_count]);
- rte_ring_sp_enqueue(
- vpool_array[index].ring,
- (void *)pkts_burst[rx_count]);
- }
- }
- }
-
- if (likely(!dev->remove))
- /* Handle guest TX */
- virtio_dev_tx_zcp(dev);
-
- /* Move to the next device in the list */
- dev_ll = dev_ll->next;
- }
- }
-
- return 0;
-}
-
-
-/*
- * Add an entry to a used linked list. A free entry must first be found
- * in the free linked list using get_data_ll_free_entry();
- */
-static void
-add_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
- struct virtio_net_data_ll *ll_dev)
-{
- struct virtio_net_data_ll *ll = *ll_root_addr;
-
- /* Set next as NULL and use a compiler barrier to avoid reordering. */
- ll_dev->next = NULL;
- rte_compiler_barrier();
-
- /* If ll == NULL then this is the first device. */
- if (ll) {
- /* Increment to the tail of the linked list. */
- while ((ll->next != NULL) )
- ll = ll->next;
-
- ll->next = ll_dev;
- } else {
- *ll_root_addr = ll_dev;
- }
-}
-
-/*
- * Remove an entry from a used linked list. The entry must then be added to
- * the free linked list using put_data_ll_free_entry().
- */
-static void
-rm_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
- struct virtio_net_data_ll *ll_dev,
- struct virtio_net_data_ll *ll_dev_last)
-{
- struct virtio_net_data_ll *ll = *ll_root_addr;
-
- if (unlikely((ll == NULL) || (ll_dev == NULL)))
- return;
-
- if (ll_dev == ll)
- *ll_root_addr = ll_dev->next;
- else
- if (likely(ll_dev_last != NULL))
- ll_dev_last->next = ll_dev->next;
- else
- RTE_LOG(ERR, VHOST_CONFIG, "Remove entry form ll failed.\n");
-}
-
-/*
- * Find and return an entry from the free linked list.
- */
-static struct virtio_net_data_ll *
-get_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr)
-{
- struct virtio_net_data_ll *ll_free = *ll_root_addr;
- struct virtio_net_data_ll *ll_dev;
-
- if (ll_free == NULL)
- return NULL;
-
- ll_dev = ll_free;
- *ll_root_addr = ll_free->next;
-
- return ll_dev;
-}
-
-/*
- * Place an entry back on to the free linked list.
- */
-static void
-put_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr,
- struct virtio_net_data_ll *ll_dev)
-{
- struct virtio_net_data_ll *ll_free = *ll_root_addr;
-
- if (ll_dev == NULL)
- return;
-
- ll_dev->next = ll_free;
- *ll_root_addr = ll_dev;
-}
-
-/*
- * Creates a linked list of a given size.
- */
-static struct virtio_net_data_ll *
-alloc_data_ll(uint32_t size)
-{
- struct virtio_net_data_ll *ll_new;
- uint32_t i;
-
- /* Malloc and then chain the linked list. */
- ll_new = malloc(size * sizeof(struct virtio_net_data_ll));
- if (ll_new == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for ll_new.\n");
- return NULL;
- }
-
- for (i = 0; i < size - 1; i++) {
- ll_new[i].dev = NULL;
- ll_new[i].next = &ll_new[i+1];
- }
- ll_new[i].next = NULL;
-
- return (ll_new);
-}
-
-/*
- * Create the main linked list along with each individual cores linked list. A used and a free list
- * are created to manage entries.
- */
-static int
-init_data_ll (void)
-{
- int lcore;
-
- RTE_LCORE_FOREACH_SLAVE(lcore) {
- lcore_info[lcore].lcore_ll = malloc(sizeof(struct lcore_ll_info));
- if (lcore_info[lcore].lcore_ll == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for lcore_ll.\n");
- return -1;
- }
-
- lcore_info[lcore].lcore_ll->device_num = 0;
- lcore_info[lcore].lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
- lcore_info[lcore].lcore_ll->ll_root_used = NULL;
- if (num_devices % num_switching_cores)
- lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll((num_devices / num_switching_cores) + 1);
- else
- lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll(num_devices / num_switching_cores);
- }
-
- /* Allocate devices up to a maximum of MAX_DEVICES. */
- ll_root_free = alloc_data_ll(MIN((num_devices), MAX_DEVICES));
-
- return 0;
-}
-
-/*
- * Set virtqueue flags so that we do not receive interrupts.
- */
-static void
-set_irq_status (struct virtio_net *dev)
-{
- dev->virtqueue[VIRTIO_RXQ]->used->flags = VRING_USED_F_NO_NOTIFY;
- dev->virtqueue[VIRTIO_TXQ]->used->flags = VRING_USED_F_NO_NOTIFY;
-}
-
-/*
- * Remove a device from the specific data core linked list and from the main linked list. Synchonization
- * occurs through the use of the lcore dev_removal_flag. Device is made volatile here to avoid re-ordering
- * of dev->remove=1 which can cause an infinite loop in the rte_pause loop.
- */
-static void
-destroy_device (volatile struct virtio_net *dev)
-{
- struct virtio_net_data_ll *ll_lcore_dev_cur;
- struct virtio_net_data_ll *ll_main_dev_cur;
- struct virtio_net_data_ll *ll_lcore_dev_last = NULL;
- struct virtio_net_data_ll *ll_main_dev_last = NULL;
- int lcore;
-
- dev->flags &= ~VIRTIO_DEV_RUNNING;
-
- /*set the remove flag. */
- dev->remove = 1;
-
- while(dev->ready != DEVICE_SAFE_REMOVE) {
- rte_pause();
- }
-
- /* Search for entry to be removed from lcore ll */
- ll_lcore_dev_cur = lcore_info[dev->coreid].lcore_ll->ll_root_used;
- while (ll_lcore_dev_cur != NULL) {
- if (ll_lcore_dev_cur->dev == dev) {
- break;
- } else {
- ll_lcore_dev_last = ll_lcore_dev_cur;
- ll_lcore_dev_cur = ll_lcore_dev_cur->next;
- }
- }
-
- if (ll_lcore_dev_cur == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG,
- "(%"PRIu64") Failed to find the dev to be destroy.\n",
- dev->device_fh);
- return;
- }
-
- /* Search for entry to be removed from main ll */
- ll_main_dev_cur = ll_root_used;
- ll_main_dev_last = NULL;
- while (ll_main_dev_cur != NULL) {
- if (ll_main_dev_cur->dev == dev) {
- break;
- } else {
- ll_main_dev_last = ll_main_dev_cur;
- ll_main_dev_cur = ll_main_dev_cur->next;
- }
- }
-
- /* Remove entries from the lcore and main ll. */
- rm_data_ll_entry(&lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->ll_root_used, ll_lcore_dev_cur, ll_lcore_dev_last);
- rm_data_ll_entry(&ll_root_used, ll_main_dev_cur, ll_main_dev_last);
-
- /* Set the dev_removal_flag on each lcore. */
- RTE_LCORE_FOREACH_SLAVE(lcore) {
- lcore_info[lcore].lcore_ll->dev_removal_flag = REQUEST_DEV_REMOVAL;
- }
-
- /*
- * Once each core has set the dev_removal_flag to ACK_DEV_REMOVAL we can be sure that
- * they can no longer access the device removed from the linked lists and that the devices
- * are no longer in use.
- */
- RTE_LCORE_FOREACH_SLAVE(lcore) {
- while (lcore_info[lcore].lcore_ll->dev_removal_flag != ACK_DEV_REMOVAL) {
- rte_pause();
- }
- }
-
- /* Add the entries back to the lcore and main free ll.*/
- put_data_ll_free_entry(&lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->ll_root_free, ll_lcore_dev_cur);
- put_data_ll_free_entry(&ll_root_free, ll_main_dev_cur);
-
- /* Decrement number of device on the lcore. */
- lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->device_num--;
-
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been removed from data core\n", dev->device_fh);
-
- if (zero_copy) {
- struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
-
- /* Stop the RX queue. */
- if (rte_eth_dev_rx_queue_stop(ports[0], dev->vmdq_rx_q) != 0) {
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In destroy_device: Failed to stop "
- "rx queue:%d\n",
- dev->device_fh,
- dev->vmdq_rx_q);
- }
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") in destroy_device: Start put mbuf in "
- "mempool back to ring for RX queue: %d\n",
- dev->device_fh, dev->vmdq_rx_q);
-
- mbuf_destroy_zcp(vpool);
-
- /* Stop the TX queue. */
- if (rte_eth_dev_tx_queue_stop(ports[0], dev->vmdq_rx_q) != 0) {
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In destroy_device: Failed to "
- "stop tx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
- }
-
- vpool = &vpool_array[dev->vmdq_rx_q + MAX_QUEUES];
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") destroy_device: Start put mbuf in mempool "
- "back to ring for TX queue: %d, dev:(%"PRIu64")\n",
- dev->device_fh, (dev->vmdq_rx_q + MAX_QUEUES),
- dev->device_fh);
-
- mbuf_destroy_zcp(vpool);
- }
-
-}
-
-/*
- * A new device is added to a data core. First the device is added to the main linked list
- * and the allocated to a specific data core.
- */
-static int
-new_device (struct virtio_net *dev)
-{
- struct virtio_net_data_ll *ll_dev;
- int lcore, core_add = 0;
- uint32_t device_num_min = num_devices;
-
- /* Add device to main ll */
- ll_dev = get_data_ll_free_entry(&ll_root_free);
- if (ll_dev == NULL) {
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") No free entry found in linked list. Device limit "
- "of %d devices per core has been reached\n",
- dev->device_fh, num_devices);
- return -1;
- }
- ll_dev->dev = dev;
- add_data_ll_entry(&ll_root_used, ll_dev);
- ll_dev->dev->vmdq_rx_q
- = ll_dev->dev->device_fh * (num_queues / num_devices);
-
- if (zero_copy) {
- uint32_t index = ll_dev->dev->vmdq_rx_q;
- uint32_t count_in_ring, i;
- struct mbuf_table *tx_q;
-
- count_in_ring = rte_ring_count(vpool_array[index].ring);
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") in new_device: mbuf count in mempool "
- "before attach is: %d\n",
- dev->device_fh,
- rte_mempool_count(vpool_array[index].pool));
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") in new_device: mbuf count in ring "
- "before attach is : %d\n",
- dev->device_fh, count_in_ring);
-
- /*
- * Attach all mbufs in vpool.ring and put back intovpool.pool.
- */
- for (i = 0; i < count_in_ring; i++)
- attach_rxmbuf_zcp(dev);
-
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in "
- "mempool after attach is: %d\n",
- dev->device_fh,
- rte_mempool_count(vpool_array[index].pool));
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in "
- "ring after attach is : %d\n",
- dev->device_fh,
- rte_ring_count(vpool_array[index].ring));
-
- tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
- tx_q->txq_id = dev->vmdq_rx_q;
-
- if (rte_eth_dev_tx_queue_start(ports[0], dev->vmdq_rx_q) != 0) {
- struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In new_device: Failed to start "
- "tx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
-
- mbuf_destroy_zcp(vpool);
- return -1;
- }
-
- if (rte_eth_dev_rx_queue_start(ports[0], dev->vmdq_rx_q) != 0) {
- struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In new_device: Failed to start "
- "rx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
-
- /* Stop the TX queue. */
- if (rte_eth_dev_tx_queue_stop(ports[0],
- dev->vmdq_rx_q) != 0) {
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In new_device: Failed to "
- "stop tx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
- }
-
- mbuf_destroy_zcp(vpool);
- return -1;
- }
-
- }
-
- /*reset ready flag*/
- dev->ready = DEVICE_MAC_LEARNING;
- dev->remove = 0;
-
- /* Find a suitable lcore to add the device. */
- RTE_LCORE_FOREACH_SLAVE(lcore) {
- if (lcore_info[lcore].lcore_ll->device_num < device_num_min) {
- device_num_min = lcore_info[lcore].lcore_ll->device_num;
- core_add = lcore;
- }
- }
- /* Add device to lcore ll */
- ll_dev->dev->coreid = core_add;
- ll_dev = get_data_ll_free_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_free);
- if (ll_dev == NULL) {
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Failed to add device to data core\n", dev->device_fh);
- dev->ready = DEVICE_SAFE_REMOVE;
- destroy_device(dev);
- return -1;
- }
- ll_dev->dev = dev;
- add_data_ll_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_used, ll_dev);
-
- /* Initialize device stats */
- memset(&dev_statistics[dev->device_fh], 0, sizeof(struct device_statistics));
-
- /* Disable notifications. */
- set_irq_status(dev);
- lcore_info[ll_dev->dev->coreid].lcore_ll->device_num++;
- dev->flags |= VIRTIO_DEV_RUNNING;
-
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d\n", dev->device_fh, dev->coreid);
-
- return 0;
-}
-
-/*
- * These callback allow devices to be added to the data core when configuration
- * has been fully complete.
- */
-static const struct virtio_net_device_ops virtio_net_device_ops =
-{
- .new_device = new_device,
- .destroy_device = destroy_device,
-};
-
-/*
- * This is a thread will wake up after a period to print stats if the user has
- * enabled them.
- */
-static void
-print_stats(void)
-{
- struct virtio_net_data_ll *dev_ll;
- uint64_t tx_dropped, rx_dropped;
- uint64_t tx, tx_total, rx, rx_total;
- uint32_t device_fh;
- const char clr[] = { 27, '[', '2', 'J', '\0' };
- const char top_left[] = { 27, '[', '1', ';', '1', 'H','\0' };
-
- while(1) {
- sleep(enable_stats);
-
- /* Clear screen and move to top left */
- printf("%s%s", clr, top_left);
-
- printf("\nDevice statistics ====================================");
-
- dev_ll = ll_root_used;
- while (dev_ll != NULL) {
- device_fh = (uint32_t)dev_ll->dev->device_fh;
- tx_total = dev_statistics[device_fh].tx_total;
- tx = dev_statistics[device_fh].tx;
- tx_dropped = tx_total - tx;
- if (zero_copy == 0) {
- rx_total = rte_atomic64_read(
- &dev_statistics[device_fh].rx_total_atomic);
- rx = rte_atomic64_read(
- &dev_statistics[device_fh].rx_atomic);
- } else {
- rx_total = dev_statistics[device_fh].rx_total;
- rx = dev_statistics[device_fh].rx;
- }
- rx_dropped = rx_total - rx;
-
- printf("\nStatistics for device %"PRIu32" ------------------------------"
- "\nTX total: %"PRIu64""
- "\nTX dropped: %"PRIu64""
- "\nTX successful: %"PRIu64""
- "\nRX total: %"PRIu64""
- "\nRX dropped: %"PRIu64""
- "\nRX successful: %"PRIu64"",
- device_fh,
- tx_total,
- tx_dropped,
- tx,
- rx_total,
- rx_dropped,
- rx);
-
- dev_ll = dev_ll->next;
- }
- printf("\n======================================================\n");
- }
-}
-
-static void
-setup_mempool_tbl(int socket, uint32_t index, char *pool_name,
- char *ring_name, uint32_t nb_mbuf)
-{
- uint16_t roomsize = VIRTIO_DESCRIPTOR_LEN_ZCP + RTE_PKTMBUF_HEADROOM;
- vpool_array[index].pool
- = rte_mempool_create(pool_name, nb_mbuf, MBUF_SIZE_ZCP,
- MBUF_CACHE_SIZE_ZCP, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, (void *)(uintptr_t)roomsize,
- rte_pktmbuf_init, NULL, socket, 0);
- if (vpool_array[index].pool != NULL) {
- vpool_array[index].ring
- = rte_ring_create(ring_name,
- rte_align32pow2(nb_mbuf + 1),
- socket, RING_F_SP_ENQ | RING_F_SC_DEQ);
- if (likely(vpool_array[index].ring != NULL)) {
- LOG_DEBUG(VHOST_CONFIG,
- "in setup_mempool_tbl: mbuf count in "
- "mempool is: %d\n",
- rte_mempool_count(vpool_array[index].pool));
- LOG_DEBUG(VHOST_CONFIG,
- "in setup_mempool_tbl: mbuf count in "
- "ring is: %d\n",
- rte_ring_count(vpool_array[index].ring));
- } else {
- rte_exit(EXIT_FAILURE, "ring_create(%s) failed",
- ring_name);
- }
-
- /* Need consider head room. */
- vpool_array[index].buf_size = roomsize - RTE_PKTMBUF_HEADROOM;
- } else {
- rte_exit(EXIT_FAILURE, "mempool_create(%s) failed", pool_name);
- }
-}
-
-
-/*
- * Main function, does initialisation and calls the per-lcore functions. The CUSE
- * device is also registered here to handle the IOCTLs.
- */
-int
-MAIN(int argc, char *argv[])
-{
- struct rte_mempool *mbuf_pool = NULL;
- unsigned lcore_id, core_id = 0;
- unsigned nb_ports, valid_num_ports;
- int ret;
- uint8_t portid, queue_id = 0;
- static pthread_t tid;
-
- /* init EAL */
- ret = rte_eal_init(argc, argv);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
- argc -= ret;
- argv += ret;
-
- /* parse app arguments */
- ret = us_vhost_parse_args(argc, argv);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Invalid argument\n");
-
- if (rte_eal_pci_probe() != 0)
- rte_exit(EXIT_FAILURE, "Error with NIC driver initialization\n");
-
- for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id ++)
- if (rte_lcore_is_enabled(lcore_id))
- lcore_ids[core_id ++] = lcore_id;
-
- if (rte_lcore_count() > RTE_MAX_LCORE)
- rte_exit(EXIT_FAILURE,"Not enough cores\n");
-
- /*set the number of swithcing cores available*/
- num_switching_cores = rte_lcore_count()-1;
-
- /* Get the number of physical ports. */
- nb_ports = rte_eth_dev_count();
- if (nb_ports > RTE_MAX_ETHPORTS)
- nb_ports = RTE_MAX_ETHPORTS;
-
- /*
- * Update the global var NUM_PORTS and global array PORTS
- * and get value of var VALID_NUM_PORTS according to system ports number
- */
- valid_num_ports = check_ports_num(nb_ports);
-
- if ((valid_num_ports == 0) || (valid_num_ports > MAX_SUP_PORTS)) {
- RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
- "but only %u port can be enabled\n",num_ports, MAX_SUP_PORTS);
- return -1;
- }
-
- if (zero_copy == 0) {
- /* Create the mbuf pool. */
- mbuf_pool = rte_mempool_create(
- "MBUF_POOL",
- NUM_MBUFS_PER_PORT
- * valid_num_ports,
- MBUF_SIZE, MBUF_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
- if (mbuf_pool == NULL)
- rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
-
- for (queue_id = 0; queue_id < MAX_QUEUES + 1; queue_id++)
- vpool_array[queue_id].pool = mbuf_pool;
-
- if (vm2vm_mode == VM2VM_HARDWARE) {
- /* Enable VT loop back to let L2 switch to do it. */
- vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1;
- LOG_DEBUG(VHOST_CONFIG,
- "Enable loop back for L2 switch in vmdq.\n");
- }
- } else {
- uint32_t nb_mbuf;
- char pool_name[RTE_MEMPOOL_NAMESIZE];
- char ring_name[RTE_MEMPOOL_NAMESIZE];
-
- rx_conf_default.start_rx_per_q = (uint8_t)zero_copy;
- rx_conf_default.rx_drop_en = 0;
- tx_conf_default.start_tx_per_q = (uint8_t)zero_copy;
- nb_mbuf = num_rx_descriptor
- + num_switching_cores * MBUF_CACHE_SIZE_ZCP
- + num_switching_cores * MAX_PKT_BURST;
-
- for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) {
- snprintf(pool_name, sizeof(pool_name),
- "rxmbuf_pool_%u", queue_id);
- snprintf(ring_name, sizeof(ring_name),
- "rxmbuf_ring_%u", queue_id);
- setup_mempool_tbl(rte_socket_id(), queue_id,
- pool_name, ring_name, nb_mbuf);
- }
-
- nb_mbuf = num_tx_descriptor
- + num_switching_cores * MBUF_CACHE_SIZE_ZCP
- + num_switching_cores * MAX_PKT_BURST;
-
- for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) {
- snprintf(pool_name, sizeof(pool_name),
- "txmbuf_pool_%u", queue_id);
- snprintf(ring_name, sizeof(ring_name),
- "txmbuf_ring_%u", queue_id);
- setup_mempool_tbl(rte_socket_id(),
- (queue_id + MAX_QUEUES),
- pool_name, ring_name, nb_mbuf);
- }
-
- if (vm2vm_mode == VM2VM_HARDWARE) {
- /* Enable VT loop back to let L2 switch to do it. */
- vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1;
- LOG_DEBUG(VHOST_CONFIG,
- "Enable loop back for L2 switch in vmdq.\n");
- }
- }
- /* Set log level. */
- rte_set_log_level(LOG_LEVEL);
-
- /* initialize all ports */
- for (portid = 0; portid < nb_ports; portid++) {
- /* skip ports that are not enabled */
- if ((enabled_port_mask & (1 << portid)) == 0) {
- RTE_LOG(INFO, VHOST_PORT,
- "Skipping disabled port %d\n", portid);
- continue;
- }
- if (port_init(portid) != 0)
- rte_exit(EXIT_FAILURE,
- "Cannot initialize network ports\n");
- }
-
- /* Initialise all linked lists. */
- if (init_data_ll() == -1)
- rte_exit(EXIT_FAILURE, "Failed to initialize linked list\n");
-
- /* Initialize device stats */
- memset(&dev_statistics, 0, sizeof(dev_statistics));
-
- /* Enable stats if the user option is set. */
- if (enable_stats)
- pthread_create(&tid, NULL, (void*)print_stats, NULL );
-
- /* Launch all data cores. */
- if (zero_copy == 0) {
- RTE_LCORE_FOREACH_SLAVE(lcore_id) {
- rte_eal_remote_launch(switch_worker,
- mbuf_pool, lcore_id);
- }
- } else {
- uint32_t count_in_mempool, index, i;
- for (index = 0; index < 2*MAX_QUEUES; index++) {
- /* For all RX and TX queues. */
- count_in_mempool
- = rte_mempool_count(vpool_array[index].pool);
-
- /*
- * Transfer all un-attached mbufs from vpool.pool
- * to vpoo.ring.
- */
- for (i = 0; i < count_in_mempool; i++) {
- struct rte_mbuf *mbuf
- = __rte_mbuf_raw_alloc(
- vpool_array[index].pool);
- rte_ring_sp_enqueue(vpool_array[index].ring,
- (void *)mbuf);
- }
-
- LOG_DEBUG(VHOST_CONFIG,
- "in MAIN: mbuf count in mempool at initial "
- "is: %d\n", count_in_mempool);
- LOG_DEBUG(VHOST_CONFIG,
- "in MAIN: mbuf count in ring at initial is :"
- " %d\n",
- rte_ring_count(vpool_array[index].ring));
- }
-
- RTE_LCORE_FOREACH_SLAVE(lcore_id)
- rte_eal_remote_launch(switch_worker_zcp, NULL,
- lcore_id);
- }
-
- /* Register CUSE device to handle IOCTLs. */
- ret = register_cuse_device((char*)&dev_basename, dev_index, get_virtio_net_callbacks());
- if (ret != 0)
- rte_exit(EXIT_FAILURE,"CUSE device setup failure.\n");
-
- init_virtio_net(&virtio_net_device_ops);
-
- /* Start CUSE session. */
- start_cuse_session_loop();
- return 0;
-
-}
-
diff --git a/examples/vhost/main.h b/examples/vhost/main.h
deleted file mode 100644
index c15d938..0000000
--- a/examples/vhost/main.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _MAIN_H_
-#define _MAIN_H_
-
-#ifdef RTE_EXEC_ENV_BAREMETAL
-#define MAIN _main
-#else
-#define MAIN main
-#endif
-
-//#define DEBUG
-
-#ifdef DEBUG
-#define LOG_LEVEL RTE_LOG_DEBUG
-#define LOG_DEBUG(log_type, fmt, args...) do { \
- RTE_LOG(DEBUG, log_type, fmt, ##args); \
-} while (0)
-#else
-#define LOG_LEVEL RTE_LOG_INFO
-#define LOG_DEBUG(log_type, fmt, args...) do{} while(0)
-#endif
-
-/* Macros for printing using RTE_LOG */
-#define RTE_LOGTYPE_VHOST_CONFIG RTE_LOGTYPE_USER1
-#define RTE_LOGTYPE_VHOST_DATA RTE_LOGTYPE_USER2
-#define RTE_LOGTYPE_VHOST_PORT RTE_LOGTYPE_USER3
-
-/*
- * Device linked list structure for data path.
- */
-struct virtio_net_data_ll
-{
- struct virtio_net *dev; /* Pointer to device created by configuration core. */
- struct virtio_net_data_ll *next; /* Pointer to next device in linked list. */
-};
-
-/*
- * Structure containing data core specific information.
- */
-struct lcore_ll_info
-{
- struct virtio_net_data_ll *ll_root_free; /* Pointer to head in free linked list. */
- struct virtio_net_data_ll *ll_root_used; /* Pointer to head of used linked list. */
- uint32_t device_num; /* Number of devices on lcore. */
- volatile uint8_t dev_removal_flag; /* Flag to synchronize device removal. */
-};
-
-struct lcore_info
-{
- struct lcore_ll_info *lcore_ll; /* Pointer to data core specific lcore_ll_info struct */
-};
-
-int MAIN(int argc, char **argv);
-#endif /* _MAIN_H_ */
diff --git a/examples/vhost/vhost-net-cdev.c b/examples/vhost/vhost-net-cdev.c
deleted file mode 100644
index 8cf806a..0000000
--- a/examples/vhost/vhost-net-cdev.c
+++ /dev/null
@@ -1,367 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <errno.h>
-#include <fuse/cuse_lowlevel.h>
-#include <linux/limits.h>
-#include <linux/vhost.h>
-#include <stdint.h>
-#include <string.h>
-#include <unistd.h>
-
-#include <rte_ethdev.h>
-#include <rte_log.h>
-#include <rte_string_fns.h>
-
-#include "main.h"
-#include "vhost-net-cdev.h"
-
-#define FUSE_OPT_DUMMY "\0\0"
-#define FUSE_OPT_FORE "-f\0\0"
-#define FUSE_OPT_NOMULTI "-s\0\0"
-
-const uint32_t default_major = 231;
-const uint32_t default_minor = 1;
-const char cuse_device_name[] = "/dev/cuse";
-const char default_cdev[] = "vhost-net";
-
-static struct fuse_session *session;
-static struct vhost_net_device_ops const *ops;
-
-/*
- * Returns vhost_device_ctx from given fuse_req_t. The index is populated later when
- * the device is added to the device linked list.
- */
-static struct vhost_device_ctx
-fuse_req_to_vhost_ctx(fuse_req_t req, struct fuse_file_info *fi)
-{
- struct vhost_device_ctx ctx;
- struct fuse_ctx const *const req_ctx = fuse_req_ctx(req);
-
- ctx.pid = req_ctx->pid;
- ctx.fh = fi->fh;
-
- return ctx;
-}
-
-/*
- * When the device is created in QEMU it gets initialised here and added to the device linked list.
- */
-static void
-vhost_net_open(fuse_req_t req, struct fuse_file_info *fi)
-{
- struct vhost_device_ctx ctx = fuse_req_to_vhost_ctx(req, fi);
- int err = 0;
-
- err = ops->new_device(ctx);
- if (err == -1) {
- fuse_reply_err(req, EPERM);
- return;
- }
-
- fi->fh = err;
-
- RTE_LOG(INFO, VHOST_CONFIG, "(%"PRIu64") Device configuration started\n", fi->fh);
- fuse_reply_open(req, fi);
-}
-
-/*
- * When QEMU is shutdown or killed the device gets released.
- */
-static void
-vhost_net_release(fuse_req_t req, struct fuse_file_info *fi)
-{
- int err = 0;
- struct vhost_device_ctx ctx = fuse_req_to_vhost_ctx(req, fi);
-
- ops->destroy_device(ctx);
- RTE_LOG(INFO, VHOST_CONFIG, "(%"PRIu64") Device released\n", ctx.fh);
- fuse_reply_err(req, err);
-}
-
-/*
- * Boilerplate code for CUSE IOCTL
- * Implicit arguments: ctx, req, result.
- */
-#define VHOST_IOCTL(func) do { \
- result = (func)(ctx); \
- fuse_reply_ioctl(req, result, NULL, 0); \
-} while(0) \
-
-/*
- * Boilerplate IOCTL RETRY
- * Implicit arguments: req.
- */
-#define VHOST_IOCTL_RETRY(size_r, size_w) do { \
- struct iovec iov_r = { arg, (size_r) }; \
- struct iovec iov_w = { arg, (size_w) }; \
- fuse_reply_ioctl_retry(req, &iov_r, (size_r)?1:0, &iov_w, (size_w)?1:0); \
-} while(0) \
-
-/*
- * Boilerplate code for CUSE Read IOCTL
- * Implicit arguments: ctx, req, result, in_bufsz, in_buf.
- */
-#define VHOST_IOCTL_R(type, var, func) do { \
- if (!in_bufsz) { \
- VHOST_IOCTL_RETRY(sizeof(type), 0); \
- } else { \
- (var) = *(const type * ) in_buf; \
- result = func(ctx, &(var)); \
- fuse_reply_ioctl(req, result, NULL, 0); \
- } \
-} while(0) \
-
-/*
- * Boilerplate code for CUSE Write IOCTL
- * Implicit arguments: ctx, req, result, out_bufsz.
- */
-#define VHOST_IOCTL_W(type, var, func) do { \
- if (!out_bufsz) { \
- VHOST_IOCTL_RETRY(0, sizeof(type)); \
- } else { \
- result = (func)(ctx, &(var)); \
- fuse_reply_ioctl(req, result, &(var), sizeof(type)); \
- } \
-} while(0) \
-
-/*
- * Boilerplate code for CUSE Read/Write IOCTL
- * Implicit arguments: ctx, req, result, in_bufsz, in_buf.
- */
-#define VHOST_IOCTL_RW(type1, var1, type2, var2, func) do { \
- if (!in_bufsz) { \
- VHOST_IOCTL_RETRY(sizeof(type1), sizeof(type2)); \
- } else { \
- (var1) = *(const type1* ) (in_buf); \
- result = (func)(ctx, (var1), &(var2)); \
- fuse_reply_ioctl(req, result, &(var2), sizeof(type2)); \
- } \
-} while(0) \
-
-/*
- * The IOCTLs are handled using CUSE/FUSE in userspace. Depending on
- * the type of IOCTL a buffer is requested to read or to write. This
- * request is handled by FUSE and the buffer is then given to CUSE.
- */
-static void
-vhost_net_ioctl(fuse_req_t req, int cmd, void *arg,
- struct fuse_file_info *fi, __rte_unused unsigned flags,
- const void *in_buf, size_t in_bufsz, size_t out_bufsz)
-{
- struct vhost_device_ctx ctx = fuse_req_to_vhost_ctx(req, fi);
- struct vhost_vring_file file;
- struct vhost_vring_state state;
- struct vhost_vring_addr addr;
- uint64_t features;
- uint32_t index;
- int result = 0;
-
- switch(cmd)
- {
- case VHOST_NET_SET_BACKEND:
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_NET_SET_BACKEND\n", ctx.fh);
- VHOST_IOCTL_R(struct vhost_vring_file, file, ops->set_backend);
- break;
-
- case VHOST_GET_FEATURES:
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_GET_FEATURES\n", ctx.fh);
- VHOST_IOCTL_W(uint64_t, features, ops->get_features);
- break;
-
- case VHOST_SET_FEATURES:
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_FEATURES\n", ctx.fh);
- VHOST_IOCTL_R(uint64_t, features, ops->set_features);
- break;
-
- case VHOST_RESET_OWNER:
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_RESET_OWNER\n", ctx.fh);
- VHOST_IOCTL(ops->reset_owner);
- break;
-
- case VHOST_SET_OWNER:
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_OWNER\n", ctx.fh);
- VHOST_IOCTL(ops->set_owner);
- break;
-
- case VHOST_SET_MEM_TABLE:
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_MEM_TABLE\n", ctx.fh);
- static struct vhost_memory mem_temp;
-
- switch(in_bufsz){
- case 0:
- VHOST_IOCTL_RETRY(sizeof(struct vhost_memory), 0);
- break;
-
- case sizeof(struct vhost_memory):
- mem_temp = *(const struct vhost_memory *) in_buf;
-
- if (mem_temp.nregions > 0) {
- VHOST_IOCTL_RETRY(sizeof(struct vhost_memory) + (sizeof(struct vhost_memory_region) * mem_temp.nregions), 0);
- } else {
- result = -1;
- fuse_reply_ioctl(req, result, NULL, 0);
- }
- break;
-
- default:
- result = ops->set_mem_table(ctx, in_buf, mem_temp.nregions);
- if (result)
- fuse_reply_err(req, EINVAL);
- else
- fuse_reply_ioctl(req, result, NULL, 0);
-
- }
-
- break;
-
- case VHOST_SET_VRING_NUM:
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_VRING_NUM\n", ctx.fh);
- VHOST_IOCTL_R(struct vhost_vring_state, state, ops->set_vring_num);
- break;
-
- case VHOST_SET_VRING_BASE:
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_VRING_BASE\n", ctx.fh);
- VHOST_IOCTL_R(struct vhost_vring_state, state, ops->set_vring_base);
- break;
-
- case VHOST_GET_VRING_BASE:
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_GET_VRING_BASE\n", ctx.fh);
- VHOST_IOCTL_RW(uint32_t, index, struct vhost_vring_state, state, ops->get_vring_base);
- break;
-
- case VHOST_SET_VRING_ADDR:
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_VRING_ADDR\n", ctx.fh);
- VHOST_IOCTL_R(struct vhost_vring_addr, addr, ops->set_vring_addr);
- break;
-
- case VHOST_SET_VRING_KICK:
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_VRING_KICK\n", ctx.fh);
- VHOST_IOCTL_R(struct vhost_vring_file, file, ops->set_vring_kick);
- break;
-
- case VHOST_SET_VRING_CALL:
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_VRING_CALL\n", ctx.fh);
- VHOST_IOCTL_R(struct vhost_vring_file, file, ops->set_vring_call);
- break;
-
- default:
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") IOCTL: DOESN NOT EXIST\n", ctx.fh);
- result = -1;
- fuse_reply_ioctl(req, result, NULL, 0);
- }
-
- if (result < 0) {
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: FAIL\n", ctx.fh);
- } else {
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: SUCCESS\n", ctx.fh);
- }
-}
-
-/*
- * Structure handling open, release and ioctl function pointers is populated.
- */
-static const struct cuse_lowlevel_ops vhost_net_ops = {
- .open = vhost_net_open,
- .release = vhost_net_release,
- .ioctl = vhost_net_ioctl,
-};
-
-/*
- * cuse_info is populated and used to register the cuse device. vhost_net_device_ops are
- * also passed when the device is registered in main.c.
- */
-int
-register_cuse_device(const char *base_name, int index, struct vhost_net_device_ops const * const pops)
-{
- struct cuse_info cuse_info;
- char device_name[PATH_MAX] = "";
- char char_device_name[PATH_MAX] = "";
- const char *device_argv[] = { device_name };
-
- char fuse_opt_dummy[] = FUSE_OPT_DUMMY;
- char fuse_opt_fore[] = FUSE_OPT_FORE;
- char fuse_opt_nomulti[] = FUSE_OPT_NOMULTI;
- char *fuse_argv[] = {fuse_opt_dummy, fuse_opt_fore, fuse_opt_nomulti};
-
- if (access(cuse_device_name, R_OK | W_OK) < 0) {
- RTE_LOG(ERR, VHOST_CONFIG, "Character device %s can't be accessed, maybe not exist\n", cuse_device_name);
- return -1;
- }
-
- /*
- * The device name is created. This is passed to QEMU so that it can register
- * the device with our application. The index allows us to have multiple instances
- * of userspace vhost which we can then add devices to separately.
- */
- if (strncmp(base_name, default_cdev, PATH_MAX)!=0) {
- snprintf(device_name, PATH_MAX, "DEVNAME=%s-%d", base_name, index);
- snprintf(char_device_name, PATH_MAX, "/dev/%s-%d", base_name, index);
- } else {
- snprintf(device_name, PATH_MAX, "DEVNAME=%s", base_name);
- snprintf(char_device_name, PATH_MAX, "/dev/%s", base_name);
- }
-
- /* Check if device already exists. */
- if (access(char_device_name, F_OK) != -1) {
- RTE_LOG(ERR, VHOST_CONFIG, "Character device %s already exists\n", char_device_name);
- return -1;
- }
-
- memset(&cuse_info, 0, sizeof(cuse_info));
- cuse_info.dev_major = default_major;
- cuse_info.dev_minor = default_minor + index;
- cuse_info.dev_info_argc = 1;
- cuse_info.dev_info_argv = device_argv;
- cuse_info.flags = CUSE_UNRESTRICTED_IOCTL;
-
- ops = pops;
-
- session = cuse_lowlevel_setup(3, fuse_argv,
- &cuse_info, &vhost_net_ops, 0, NULL);
- if (session == NULL)
- return -1;
-
- return 0;
-}
-
-/*
- * The CUSE session is launched allowing the application to receive open, release and ioctl calls.
- */
-int
-start_cuse_session_loop(void)
-{
- fuse_session_loop(session);
-
- return 0;
-}
diff --git a/examples/vhost/vhost-net-cdev.h b/examples/vhost/vhost-net-cdev.h
deleted file mode 100644
index 575daa9..0000000
--- a/examples/vhost/vhost-net-cdev.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _VHOST_NET_CDEV_H_
-#define _VHOST_NET_CDEV_H_
-
-#include <linux/vhost.h>
-
-struct vhost_memory;
-struct vhost_vring_state;
-struct vhost_vring_addr;
-struct vhost_vring_file;
-
-/*
- * Structure used to identify device context.
- */
-struct vhost_device_ctx
-{
- pid_t pid; /* PID of process calling the IOCTL. */
- uint64_t fh; /* Populated with fi->fh to track the device index. */
-};
-
-/*
- * Structure contains function pointers to be defined in virtio-net.c. These
- * functions are called in CUSE context and are used to configure devices.
- */
-struct vhost_net_device_ops {
- int (* new_device) (struct vhost_device_ctx);
- void (* destroy_device) (struct vhost_device_ctx);
-
- int (* get_features) (struct vhost_device_ctx, uint64_t *);
- int (* set_features) (struct vhost_device_ctx, uint64_t *);
-
- int (* set_mem_table) (struct vhost_device_ctx, const void *, uint32_t);
-
- int (* set_vring_num) (struct vhost_device_ctx, struct vhost_vring_state *);
- int (* set_vring_addr) (struct vhost_device_ctx, struct vhost_vring_addr *);
- int (* set_vring_base) (struct vhost_device_ctx, struct vhost_vring_state *);
- int (* get_vring_base) (struct vhost_device_ctx, uint32_t, struct vhost_vring_state *);
-
- int (* set_vring_kick) (struct vhost_device_ctx, struct vhost_vring_file *);
- int (* set_vring_call) (struct vhost_device_ctx, struct vhost_vring_file *);
-
- int (* set_backend) (struct vhost_device_ctx, struct vhost_vring_file *);
-
- int (* set_owner) (struct vhost_device_ctx);
- int (* reset_owner) (struct vhost_device_ctx);
-};
-
-int register_cuse_device(const char *base_name, int index, struct vhost_net_device_ops const * const);
-int start_cuse_session_loop(void);
-
-#endif /* _VHOST_NET_CDEV_H_ */
diff --git a/examples/vhost/virtio-net.c b/examples/vhost/virtio-net.c
deleted file mode 100644
index 5e659c7..0000000
--- a/examples/vhost/virtio-net.c
+++ /dev/null
@@ -1,1165 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dirent.h>
-#include <fuse/cuse_lowlevel.h>
-#include <linux/vhost.h>
-#include <linux/virtio_net.h>
-#include <stddef.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include <sys/eventfd.h>
-#include <sys/ioctl.h>
-#include <sys/mman.h>
-#include <unistd.h>
-
-#include <rte_ethdev.h>
-#include <rte_log.h>
-#include <rte_string_fns.h>
-#include <rte_memory.h>
-
-#include "main.h"
-#include "virtio-net.h"
-#include "vhost-net-cdev.h"
-#include "eventfd_link/eventfd_link.h"
-
-const char eventfd_cdev[] = "/dev/eventfd-link";
-
-extern uint32_t num_devices;
-static uint32_t num_cur_devices = 0;
-
-/* device ops to add/remove device to data core. */
-static struct virtio_net_device_ops const * notify_ops;
-/* Root address of the linked list in the configuration core. */
-static struct virtio_net_config_ll *ll_root = NULL;
-
-/* Features supported by this application. RX merge buffers are disabled by default. */
-uint64_t VHOST_FEATURES = (0ULL << VIRTIO_NET_F_MRG_RXBUF);
-
-/* Line size for reading maps file. */
-const uint32_t BUFSIZE = PATH_MAX;
-
-/* Size of prot char array in procmap. */
-#define PROT_SZ 5
-
-/* Number of elements in procmap struct. */
-#define PROCMAP_SZ 8
-
-/* Structure containing information gathered from maps file. */
-struct procmap
-{
- uint64_t va_start; /* Start virtual address in file. */
- uint64_t len; /* Size of file. */
- uint64_t pgoff; /* Not used. */
- uint32_t maj; /* Not used. */
- uint32_t min; /* Not used. */
- uint32_t ino; /* Not used. */
- char prot[PROT_SZ]; /* Not used. */
- char fname[PATH_MAX]; /* File name. */
-};
-
-/*
- * Converts QEMU virtual address to Vhost virtual address. This function is used
- * to convert the ring addresses to our address space.
- */
-static uint64_t
-qva_to_vva(struct virtio_net *dev, uint64_t qemu_va)
-{
- struct virtio_memory_regions *region;
- uint64_t vhost_va = 0;
- uint32_t regionidx = 0;
-
- /* Find the region where the address lives. */
- for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
- region = &dev->mem->regions[regionidx];
- if ((qemu_va >= region->userspace_address) &&
- (qemu_va <= region->userspace_address +
- region->memory_size)) {
- vhost_va = dev->mem->mapped_address + qemu_va - dev->mem->base_address;
- break;
- }
- }
- return vhost_va;
-}
-
-/*
- * Locate the file containing QEMU's memory space and map it to our address space.
- */
-static int
-host_memory_map (struct virtio_net *dev, struct virtio_memory *mem, pid_t pid, uint64_t addr)
-{
- struct dirent *dptr = NULL;
- struct procmap procmap;
- DIR *dp = NULL;
- int fd;
- int i;
- char memfile[PATH_MAX];
- char mapfile[PATH_MAX];
- char procdir[PATH_MAX];
- char resolved_path[PATH_MAX];
- FILE *fmap;
- void *map;
- uint8_t found = 0;
- char line[BUFSIZE];
- char dlm[] = "- : ";
- char *str, *sp, *in[PROCMAP_SZ];
- char *end = NULL;
-
- /* Path where mem files are located. */
- snprintf (procdir, PATH_MAX, "/proc/%u/fd/", pid);
- /* Maps file used to locate mem file. */
- snprintf (mapfile, PATH_MAX, "/proc/%u/maps", pid);
-
- fmap = fopen(mapfile, "r");
- if (fmap == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to open maps file for pid %d\n", dev->device_fh, pid);
- return -1;
- }
-
- /* Read through maps file until we find out base_address. */
- while (fgets(line, BUFSIZE, fmap) != 0) {
- str = line;
- errno = 0;
- /* Split line in to fields. */
- for (i = 0; i < PROCMAP_SZ; i++) {
- if (((in[i] = strtok_r(str, &dlm[i], &sp)) == NULL) || (errno != 0)) {
- fclose(fmap);
- return -1;
- }
- str = NULL;
- }
-
- /* Convert/Copy each field as needed. */
- procmap.va_start = strtoull(in[0], &end, 16);
- if ((in[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
- fclose(fmap);
- return -1;
- }
-
- procmap.len = strtoull(in[1], &end, 16);
- if ((in[1] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
- fclose(fmap);
- return -1;
- }
-
- procmap.pgoff = strtoull(in[3], &end, 16);
- if ((in[3] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
- fclose(fmap);
- return -1;
- }
-
- procmap.maj = strtoul(in[4], &end, 16);
- if ((in[4] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
- fclose(fmap);
- return -1;
- }
-
- procmap.min = strtoul(in[5], &end, 16);
- if ((in[5] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
- fclose(fmap);
- return -1;
- }
-
- procmap.ino = strtoul(in[6], &end, 16);
- if ((in[6] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
- fclose(fmap);
- return -1;
- }
-
- memcpy(&procmap.prot, in[2], PROT_SZ);
- memcpy(&procmap.fname, in[7], PATH_MAX);
-
- if (procmap.va_start == addr) {
- procmap.len = procmap.len - procmap.va_start;
- found = 1;
- break;
- }
- }
- fclose(fmap);
-
- if (!found) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find memory file in pid %d maps file\n", dev->device_fh, pid);
- return -1;
- }
-
- /* Find the guest memory file among the process fds. */
- dp = opendir(procdir);
- if (dp == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Cannot open pid %d process directory \n", dev->device_fh, pid);
- return -1;
-
- }
-
- found = 0;
-
- /* Read the fd directory contents. */
- while (NULL != (dptr = readdir(dp))) {
- snprintf (memfile, PATH_MAX, "/proc/%u/fd/%s", pid, dptr->d_name);
- realpath(memfile, resolved_path);
- if (resolved_path == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to resolve fd directory\n", dev->device_fh);
- closedir(dp);
- return -1;
- }
- if (strncmp(resolved_path, procmap.fname,
- strnlen(procmap.fname, PATH_MAX)) == 0) {
- found = 1;
- break;
- }
- }
-
- closedir(dp);
-
- if (found == 0) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find memory file for pid %d\n", dev->device_fh, pid);
- return -1;
- }
- /* Open the shared memory file and map the memory into this process. */
- fd = open(memfile, O_RDWR);
-
- if (fd == -1) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to open %s for pid %d\n", dev->device_fh, memfile, pid);
- return -1;
- }
-
- map = mmap(0, (size_t)procmap.len, PROT_READ|PROT_WRITE , MAP_POPULATE|MAP_SHARED, fd, 0);
- close (fd);
-
- if (map == MAP_FAILED) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Error mapping the file %s for pid %d\n", dev->device_fh, memfile, pid);
- return -1;
- }
-
- /* Store the memory address and size in the device data structure */
- mem->mapped_address = (uint64_t)(uintptr_t)map;
- mem->mapped_size = procmap.len;
-
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") Mem File: %s->%s - Size: %llu - VA: %p\n", dev->device_fh,
- memfile, resolved_path, (long long unsigned)mem->mapped_size, map);
-
- return 0;
-}
-
-/*
- * Retrieves an entry from the devices configuration linked list.
- */
-static struct virtio_net_config_ll *
-get_config_ll_entry(struct vhost_device_ctx ctx)
-{
- struct virtio_net_config_ll *ll_dev = ll_root;
-
- /* Loop through linked list until the device_fh is found. */
- while (ll_dev != NULL) {
- if (ll_dev->dev.device_fh == ctx.fh)
- return ll_dev;
- ll_dev = ll_dev->next;
- }
-
- return NULL;
-}
-
-/*
- * Searches the configuration core linked list and retrieves the device if it exists.
- */
-static struct virtio_net *
-get_device(struct vhost_device_ctx ctx)
-{
- struct virtio_net_config_ll *ll_dev;
-
- ll_dev = get_config_ll_entry(ctx);
-
- /* If a matching entry is found in the linked list, return the device in that entry. */
- if (ll_dev) {
- return &ll_dev->dev;
- }
-
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Device not found in linked list.\n", ctx.fh);
- return NULL;
-}
-
-/*
- * Add entry containing a device to the device configuration linked list.
- */
-static void
-add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
-{
- struct virtio_net_config_ll *ll_dev = ll_root;
-
- /* If ll_dev == NULL then this is the first device so go to else */
- if (ll_dev) {
- /* If the 1st device_fh != 0 then we insert our device here. */
- if (ll_dev->dev.device_fh != 0) {
- new_ll_dev->dev.device_fh = 0;
- new_ll_dev->next = ll_dev;
- ll_root = new_ll_dev;
- } else {
- /* Increment through the ll until we find un unused device_fh. Insert the device at that entry*/
- while ((ll_dev->next != NULL) && (ll_dev->dev.device_fh == (ll_dev->next->dev.device_fh - 1)))
- ll_dev = ll_dev->next;
-
- new_ll_dev->dev.device_fh = ll_dev->dev.device_fh + 1;
- new_ll_dev->next = ll_dev->next;
- ll_dev->next = new_ll_dev;
- }
- } else {
- ll_root = new_ll_dev;
- ll_root->dev.device_fh = 0;
- }
-
-}
-
-/*
- * Unmap any memory, close any file descriptors and free any memory owned by a device.
- */
-static void
-cleanup_device(struct virtio_net *dev)
-{
- /* Unmap QEMU memory file if mapped. */
- if (dev->mem) {
- munmap((void*)(uintptr_t)dev->mem->mapped_address, (size_t)dev->mem->mapped_size);
- if (dev->mem->regions_hpa)
- free(dev->mem->regions_hpa);
- free(dev->mem);
- }
-
- /* Close any event notifiers opened by device. */
- if (dev->virtqueue[VIRTIO_RXQ]->callfd)
- close((int)dev->virtqueue[VIRTIO_RXQ]->callfd);
- if (dev->virtqueue[VIRTIO_RXQ]->kickfd)
- close((int)dev->virtqueue[VIRTIO_RXQ]->kickfd);
- if (dev->virtqueue[VIRTIO_TXQ]->callfd)
- close((int)dev->virtqueue[VIRTIO_TXQ]->callfd);
- if (dev->virtqueue[VIRTIO_TXQ]->kickfd)
- close((int)dev->virtqueue[VIRTIO_TXQ]->kickfd);
-}
-
-/*
- * Release virtqueues and device memory.
- */
-static void
-free_device(struct virtio_net_config_ll *ll_dev)
-{
- /* Free any malloc'd memory */
- free(ll_dev->dev.virtqueue[VIRTIO_RXQ]);
- free(ll_dev->dev.virtqueue[VIRTIO_TXQ]);
- free(ll_dev);
-}
-/*
- * Remove an entry from the device configuration linked list.
- */
-static struct virtio_net_config_ll *
-rm_config_ll_entry(struct virtio_net_config_ll *ll_dev, struct virtio_net_config_ll *ll_dev_last)
-{
- /* First remove the device and then clean it up. */
- if (ll_dev == ll_root) {
- ll_root = ll_dev->next;
- cleanup_device(&ll_dev->dev);
- free_device(ll_dev);
- return ll_root;
- } else {
- if (likely(ll_dev_last != NULL)) {
- ll_dev_last->next = ll_dev->next;
- cleanup_device(&ll_dev->dev);
- free_device(ll_dev);
- return ll_dev_last->next;
- } else {
- cleanup_device(&ll_dev->dev);
- free_device(ll_dev);
- RTE_LOG(ERR, VHOST_CONFIG, "Remove entry from config_ll failed\n");
- return NULL;
- }
- }
-}
-
-/*
- * Initialise all variables in device structure.
- */
-static void
-init_device(struct virtio_net *dev)
-{
- uint64_t vq_offset;
-
- /* Virtqueues have already been malloced so we don't want to set them to NULL. */
- vq_offset = offsetof(struct virtio_net, mem);
-
- /* Set everything to 0. */
- memset((void*)(uintptr_t)((uint64_t)(uintptr_t)dev + vq_offset), 0,
- (sizeof(struct virtio_net) - (size_t)vq_offset));
- memset(dev->virtqueue[VIRTIO_RXQ], 0, sizeof(struct vhost_virtqueue));
- memset(dev->virtqueue[VIRTIO_TXQ], 0, sizeof(struct vhost_virtqueue));
-
- /* Backends are set to -1 indicating an inactive device. */
- dev->virtqueue[VIRTIO_RXQ]->backend = VIRTIO_DEV_STOPPED;
- dev->virtqueue[VIRTIO_TXQ]->backend = VIRTIO_DEV_STOPPED;
-}
-
-/*
- * Function is called from the CUSE open function. The device structure is
- * initialised and a new entry is added to the device configuration linked
- * list.
- */
-static int
-new_device(struct vhost_device_ctx ctx)
-{
- struct virtio_net_config_ll *new_ll_dev;
- struct vhost_virtqueue *virtqueue_rx, *virtqueue_tx;
-
- /*check the number of devices in the system*/
- if (num_cur_devices == num_devices) {
- RTE_LOG(ERR, VHOST_CONFIG, "() Max num devices (%u) exceeded\n", num_devices);
- return -1;
- }
-
- /* Setup device and virtqueues. */
- new_ll_dev = malloc(sizeof(struct virtio_net_config_ll));
- if (new_ll_dev == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to allocate memory for dev.\n", ctx.fh);
- return -1;
- }
-
- virtqueue_rx = malloc(sizeof(struct vhost_virtqueue));
- if (virtqueue_rx == NULL) {
- free(new_ll_dev);
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to allocate memory for virtqueue_rx.\n", ctx.fh);
- return -1;
- }
-
- virtqueue_tx = malloc(sizeof(struct vhost_virtqueue));
- if (virtqueue_tx == NULL) {
- free(virtqueue_rx);
- free(new_ll_dev);
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to allocate memory for virtqueue_tx.\n", ctx.fh);
- return -1;
- }
-
- new_ll_dev->dev.virtqueue[VIRTIO_RXQ] = virtqueue_rx;
- new_ll_dev->dev.virtqueue[VIRTIO_TXQ] = virtqueue_tx;
-
- /* Initialise device and virtqueues. */
- init_device(&new_ll_dev->dev);
-
- new_ll_dev->next = NULL;
-
- /* Add entry to device configuration linked list. */
- add_config_ll_entry(new_ll_dev);
-
- /*increment the number of devices in the system*/
- num_cur_devices++;
-
- return new_ll_dev->dev.device_fh;
-}
-
-/*
- * Function is called from the CUSE release function. This function will cleanup
- * the device and remove it from device configuration linked list.
- */
-static void
-destroy_device(struct vhost_device_ctx ctx)
-{
- struct virtio_net_config_ll *ll_dev_cur_ctx, *ll_dev_last = NULL;
- struct virtio_net_config_ll *ll_dev_cur = ll_root;
-
- /* Find the linked list entry for the device to be removed. */
- ll_dev_cur_ctx = get_config_ll_entry(ctx);
- while (ll_dev_cur != NULL) {
- /* If the device is found or a device that doesn't exist is found then it is removed. */
- if (ll_dev_cur == ll_dev_cur_ctx) {
- /*
- * If the device is running on a data core then call the function to remove it from
- * the data core.
- */
- if ((ll_dev_cur->dev.flags & VIRTIO_DEV_RUNNING))
- notify_ops->destroy_device(&(ll_dev_cur->dev));
- ll_dev_cur = rm_config_ll_entry(ll_dev_cur, ll_dev_last);
- } else {
- ll_dev_last = ll_dev_cur;
- ll_dev_cur = ll_dev_cur->next;
- }
- }
-
- /*decrement the number of devices in the system*/
- num_cur_devices--;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_SET_OWNER
- * This function just returns success at the moment unless the device hasn't been initialised.
- */
-static int
-set_owner(struct vhost_device_ctx ctx)
-{
- struct virtio_net *dev;
-
- dev = get_device(ctx);
- if (dev == NULL)
- return -1;
-
- return 0;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_RESET_OWNER
- */
-static int
-reset_owner(struct vhost_device_ctx ctx)
-{
- struct virtio_net_config_ll *ll_dev;
-
- ll_dev = get_config_ll_entry(ctx);
-
- cleanup_device(&ll_dev->dev);
- init_device(&ll_dev->dev);
-
- return 0;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_GET_FEATURES
- * The features that we support are requested.
- */
-static int
-get_features(struct vhost_device_ctx ctx, uint64_t *pu)
-{
- struct virtio_net *dev;
-
- dev = get_device(ctx);
- if (dev == NULL)
- return -1;
-
- /* Send our supported features. */
- *pu = VHOST_FEATURES;
- return 0;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_SET_FEATURES
- * We receive the negotiated set of features supported by us and the virtio device.
- */
-static int
-set_features(struct vhost_device_ctx ctx, uint64_t *pu)
-{
- struct virtio_net *dev;
-
- dev = get_device(ctx);
- if (dev == NULL)
- return -1;
- if (*pu & ~VHOST_FEATURES)
- return -1;
-
- /* Store the negotiated feature list for the device. */
- dev->features = *pu;
-
- /* Set the vhost_hlen depending on if VIRTIO_NET_F_MRG_RXBUF is set. */
- if (dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF)) {
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") Mergeable RX buffers enabled\n", dev->device_fh);
- dev->virtqueue[VIRTIO_RXQ]->vhost_hlen = sizeof(struct virtio_net_hdr_mrg_rxbuf);
- dev->virtqueue[VIRTIO_TXQ]->vhost_hlen = sizeof(struct virtio_net_hdr_mrg_rxbuf);
- } else {
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") Mergeable RX buffers disabled\n", dev->device_fh);
- dev->virtqueue[VIRTIO_RXQ]->vhost_hlen = sizeof(struct virtio_net_hdr);
- dev->virtqueue[VIRTIO_TXQ]->vhost_hlen = sizeof(struct virtio_net_hdr);
- }
- return 0;
-}
-
-/*
- * Calculate the region count of physical continous regions for one particular
- * region of whose vhost virtual address is continous. The particular region
- * start from vva_start, with size of 'size' in argument.
- */
-static uint32_t check_hpa_regions(uint64_t vva_start, uint64_t size)
-{
- uint32_t i, nregions = 0, page_size = PAGE_SIZE;
- uint64_t cur_phys_addr = 0, next_phys_addr = 0;
- if (vva_start % page_size) {
- LOG_DEBUG(VHOST_CONFIG,
- "in check_countinous: vva start(%p) mod page_size(%d) "
- "has remainder\n",
- (void *)(uintptr_t)vva_start, page_size);
- return 0;
- }
- if (size % page_size) {
- LOG_DEBUG(VHOST_CONFIG,
- "in check_countinous: "
- "size((%"PRIu64")) mod page_size(%d) has remainder\n",
- size, page_size);
- return 0;
- }
- for (i = 0; i < size - page_size; i = i + page_size) {
- cur_phys_addr
- = rte_mem_virt2phy((void *)(uintptr_t)(vva_start + i));
- next_phys_addr = rte_mem_virt2phy(
- (void *)(uintptr_t)(vva_start + i + page_size));
- if ((cur_phys_addr + page_size) != next_phys_addr) {
- ++nregions;
- LOG_DEBUG(VHOST_CONFIG,
- "in check_continuous: hva addr:(%p) is not "
- "continuous with hva addr:(%p), diff:%d\n",
- (void *)(uintptr_t)(vva_start + (uint64_t)i),
- (void *)(uintptr_t)(vva_start + (uint64_t)i
- + page_size), page_size);
- LOG_DEBUG(VHOST_CONFIG,
- "in check_continuous: hpa addr:(%p) is not "
- "continuous with hpa addr:(%p), "
- "diff:(%"PRIu64")\n",
- (void *)(uintptr_t)cur_phys_addr,
- (void *)(uintptr_t)next_phys_addr,
- (next_phys_addr-cur_phys_addr));
- }
- }
- return nregions;
-}
-
-/*
- * Divide each region whose vhost virtual address is continous into a few
- * sub-regions, make sure the physical address within each sub-region are
- * continous. And fill offset(to GPA) and size etc. information of each
- * sub-region into regions_hpa.
- */
-static uint32_t fill_hpa_memory_regions(void *memory)
-{
- uint32_t regionidx, regionidx_hpa = 0, i, k, page_size = PAGE_SIZE;
- uint64_t cur_phys_addr = 0, next_phys_addr = 0, vva_start;
- struct virtio_memory *virtio_memory = (struct virtio_memory *)memory;
- struct virtio_memory_regions_hpa *mem_region_hpa
- = virtio_memory->regions_hpa;
-
- if (mem_region_hpa == NULL)
- return 0;
-
- for (regionidx = 0; regionidx < virtio_memory->nregions; regionidx++) {
- vva_start = virtio_memory->regions[regionidx].guest_phys_address
- + virtio_memory->regions[regionidx].address_offset;
- mem_region_hpa[regionidx_hpa].guest_phys_address
- = virtio_memory->regions[regionidx].guest_phys_address;
- mem_region_hpa[regionidx_hpa].host_phys_addr_offset =
- rte_mem_virt2phy((void *)(uintptr_t)(vva_start))
- - mem_region_hpa[regionidx_hpa].guest_phys_address;
- LOG_DEBUG(VHOST_CONFIG,
- "in fill_hpa_regions: guest phys addr start[%d]:(%p)\n",
- regionidx_hpa,
- (void *)(uintptr_t)
- (mem_region_hpa[regionidx_hpa].guest_phys_address));
- LOG_DEBUG(VHOST_CONFIG,
- "in fill_hpa_regions: host phys addr start[%d]:(%p)\n",
- regionidx_hpa,
- (void *)(uintptr_t)
- (mem_region_hpa[regionidx_hpa].host_phys_addr_offset));
- for (i = 0, k = 0;
- i < virtio_memory->regions[regionidx].memory_size
- - page_size;
- i += page_size) {
- cur_phys_addr = rte_mem_virt2phy(
- (void *)(uintptr_t)(vva_start + i));
- next_phys_addr = rte_mem_virt2phy(
- (void *)(uintptr_t)(vva_start
- + i + page_size));
- if ((cur_phys_addr + page_size) != next_phys_addr) {
- mem_region_hpa[regionidx_hpa].guest_phys_address_end =
- mem_region_hpa[regionidx_hpa].guest_phys_address
- + k + page_size;
- mem_region_hpa[regionidx_hpa].memory_size
- = k + page_size;
- LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest "
- "phys addr end [%d]:(%p)\n",
- regionidx_hpa,
- (void *)(uintptr_t)
- (mem_region_hpa[regionidx_hpa].guest_phys_address_end));
- LOG_DEBUG(VHOST_CONFIG,
- "in fill_hpa_regions: guest phys addr "
- "size [%d]:(%p)\n",
- regionidx_hpa,
- (void *)(uintptr_t)
- (mem_region_hpa[regionidx_hpa].memory_size));
- mem_region_hpa[regionidx_hpa + 1].guest_phys_address
- = mem_region_hpa[regionidx_hpa].guest_phys_address_end;
- ++regionidx_hpa;
- mem_region_hpa[regionidx_hpa].host_phys_addr_offset =
- next_phys_addr
- - mem_region_hpa[regionidx_hpa].guest_phys_address;
- LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest"
- " phys addr start[%d]:(%p)\n",
- regionidx_hpa,
- (void *)(uintptr_t)
- (mem_region_hpa[regionidx_hpa].guest_phys_address));
- LOG_DEBUG(VHOST_CONFIG,
- "in fill_hpa_regions: host phys addr "
- "start[%d]:(%p)\n",
- regionidx_hpa,
- (void *)(uintptr_t)
- (mem_region_hpa[regionidx_hpa].host_phys_addr_offset));
- k = 0;
- } else {
- k += page_size;
- }
- }
- mem_region_hpa[regionidx_hpa].guest_phys_address_end
- = mem_region_hpa[regionidx_hpa].guest_phys_address
- + k + page_size;
- mem_region_hpa[regionidx_hpa].memory_size = k + page_size;
- LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest phys addr end "
- "[%d]:(%p)\n", regionidx_hpa,
- (void *)(uintptr_t)
- (mem_region_hpa[regionidx_hpa].guest_phys_address_end));
- LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest phys addr size "
- "[%d]:(%p)\n", regionidx_hpa,
- (void *)(uintptr_t)
- (mem_region_hpa[regionidx_hpa].memory_size));
- ++regionidx_hpa;
- }
- return regionidx_hpa;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_SET_MEM_TABLE
- * This function creates and populates the memory structure for the device. This includes
- * storing offsets used to translate buffer addresses.
- */
-static int
-set_mem_table(struct vhost_device_ctx ctx, const void *mem_regions_addr, uint32_t nregions)
-{
- struct virtio_net *dev;
- struct vhost_memory_region *mem_regions;
- struct virtio_memory *mem;
- uint64_t size = offsetof(struct vhost_memory, regions);
- uint32_t regionidx, valid_regions;
-
- dev = get_device(ctx);
- if (dev == NULL)
- return -1;
-
- if (dev->mem) {
- munmap((void*)(uintptr_t)dev->mem->mapped_address, (size_t)dev->mem->mapped_size);
- free(dev->mem);
- }
-
- /* Malloc the memory structure depending on the number of regions. */
- mem = calloc(1, sizeof(struct virtio_memory) + (sizeof(struct virtio_memory_regions) * nregions));
- if (mem == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to allocate memory for dev->mem.\n", dev->device_fh);
- return -1;
- }
-
- mem->nregions = nregions;
-
- mem_regions = (void*)(uintptr_t)((uint64_t)(uintptr_t)mem_regions_addr + size);
-
- for (regionidx = 0; regionidx < mem->nregions; regionidx++) {
- /* Populate the region structure for each region. */
- mem->regions[regionidx].guest_phys_address = mem_regions[regionidx].guest_phys_addr;
- mem->regions[regionidx].guest_phys_address_end = mem->regions[regionidx].guest_phys_address +
- mem_regions[regionidx].memory_size;
- mem->regions[regionidx].memory_size = mem_regions[regionidx].memory_size;
- mem->regions[regionidx].userspace_address = mem_regions[regionidx].userspace_addr;
-
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") REGION: %u - GPA: %p - QEMU VA: %p - SIZE (%"PRIu64")\n", dev->device_fh,
- regionidx, (void*)(uintptr_t)mem->regions[regionidx].guest_phys_address,
- (void*)(uintptr_t)mem->regions[regionidx].userspace_address,
- mem->regions[regionidx].memory_size);
-
- /*set the base address mapping*/
- if (mem->regions[regionidx].guest_phys_address == 0x0) {
- mem->base_address = mem->regions[regionidx].userspace_address;
- /* Map VM memory file */
- if (host_memory_map(dev, mem, ctx.pid, mem->base_address) != 0) {
- free(mem);
- return -1;
- }
- }
- }
-
- /* Check that we have a valid base address. */
- if (mem->base_address == 0) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find base address of qemu memory file.\n", dev->device_fh);
- free(mem);
- return -1;
- }
-
- /* Check if all of our regions have valid mappings. Usually one does not exist in the QEMU memory file. */
- valid_regions = mem->nregions;
- for (regionidx = 0; regionidx < mem->nregions; regionidx++) {
- if ((mem->regions[regionidx].userspace_address < mem->base_address) ||
- (mem->regions[regionidx].userspace_address > (mem->base_address + mem->mapped_size)))
- valid_regions--;
- }
-
- /* If a region does not have a valid mapping we rebuild our memory struct to contain only valid entries. */
- if (valid_regions != mem->nregions) {
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") Not all memory regions exist in the QEMU mem file. Re-populating mem structure\n",
- dev->device_fh);
-
- /* Re-populate the memory structure with only valid regions. Invalid regions are over-written with memmove. */
- valid_regions = 0;
-
- for (regionidx = mem->nregions; 0 != regionidx--;) {
- if ((mem->regions[regionidx].userspace_address < mem->base_address) ||
- (mem->regions[regionidx].userspace_address > (mem->base_address + mem->mapped_size))) {
- memmove(&mem->regions[regionidx], &mem->regions[regionidx + 1],
- sizeof(struct virtio_memory_regions) * valid_regions);
- } else {
- valid_regions++;
- }
- }
- }
- mem->nregions = valid_regions;
- mem->nregions_hpa = mem->nregions;
- dev->mem = mem;
-
- /*
- * Calculate the address offset for each region. This offset is used to identify the vhost virtual address
- * corresponding to a QEMU guest physical address.
- */
- for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
- dev->mem->regions[regionidx].address_offset = dev->mem->regions[regionidx].userspace_address - dev->mem->base_address
- + dev->mem->mapped_address - dev->mem->regions[regionidx].guest_phys_address;
-
- dev->mem->nregions_hpa
- += check_hpa_regions(
- dev->mem->regions[regionidx].guest_phys_address
- + dev->mem->regions[regionidx].address_offset,
- dev->mem->regions[regionidx].memory_size);
- }
- if (dev->mem->regions_hpa != NULL) {
- free(dev->mem->regions_hpa);
- dev->mem->regions_hpa = NULL;
- }
-
- dev->mem->regions_hpa = (struct virtio_memory_regions_hpa *) calloc(1,
- (sizeof(struct virtio_memory_regions_hpa)
- * dev->mem->nregions_hpa));
- if (dev->mem->regions_hpa == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG,
- "(%"PRIu64") Failed to allocate memory for "
- "dev->mem->regions_hpa.\n", dev->device_fh);
- return -1;
- }
- if (fill_hpa_memory_regions(
- (void *)dev->mem) != dev->mem->nregions_hpa) {
- RTE_LOG(ERR, VHOST_CONFIG,
- "in set_mem_table: hpa memory regions number mismatch: "
- "[%d]\n", dev->mem->nregions_hpa);
- return -1;
- }
-
- return 0;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_SET_VRING_NUM
- * The virtio device sends us the size of the descriptor ring.
- */
-static int
-set_vring_num(struct vhost_device_ctx ctx, struct vhost_vring_state *state)
-{
- struct virtio_net *dev;
-
- dev = get_device(ctx);
- if (dev == NULL)
- return -1;
-
- /* State->index refers to the queue index. The TX queue is 1, RX queue is 0. */
- dev->virtqueue[state->index]->size = state->num;
-
- return 0;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_SET_VRING_ADDR
- * The virtio device sends us the desc, used and avail ring addresses. This function
- * then converts these to our address space.
- */
-static int
-set_vring_addr(struct vhost_device_ctx ctx, struct vhost_vring_addr *addr)
-{
- struct virtio_net *dev;
- struct vhost_virtqueue *vq;
-
- dev = get_device(ctx);
- if (dev == NULL)
- return -1;
-
- /* addr->index refers to the queue index. The TX queue is 1, RX queue is 0. */
- vq = dev->virtqueue[addr->index];
-
- /* The addresses are converted from QEMU virtual to Vhost virtual. */
- vq->desc = (struct vring_desc*)(uintptr_t)qva_to_vva(dev, addr->desc_user_addr);
- if (vq->desc == 0) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find descriptor ring address.\n", dev->device_fh);
- return -1;
- }
-
- vq->avail = (struct vring_avail*)(uintptr_t)qva_to_vva(dev, addr->avail_user_addr);
- if (vq->avail == 0) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find available ring address.\n", dev->device_fh);
- return -1;
- }
-
- vq->used = (struct vring_used*)(uintptr_t)qva_to_vva(dev, addr->used_user_addr);
- if (vq->used == 0) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find used ring address.\n", dev->device_fh);
- return -1;
- }
-
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") mapped address desc: %p\n", dev->device_fh, vq->desc);
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") mapped address avail: %p\n", dev->device_fh, vq->avail);
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") mapped address used: %p\n", dev->device_fh, vq->used);
-
- return 0;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_SET_VRING_BASE
- * The virtio device sends us the available ring last used index.
- */
-static int
-set_vring_base(struct vhost_device_ctx ctx, struct vhost_vring_state *state)
-{
- struct virtio_net *dev;
-
- dev = get_device(ctx);
- if (dev == NULL)
- return -1;
-
- /* State->index refers to the queue index. The TX queue is 1, RX queue is 0. */
- dev->virtqueue[state->index]->last_used_idx = state->num;
- dev->virtqueue[state->index]->last_used_idx_res = state->num;
-
- return 0;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_GET_VRING_BASE
- * We send the virtio device our available ring last used index.
- */
-static int
-get_vring_base(struct vhost_device_ctx ctx, uint32_t index, struct vhost_vring_state *state)
-{
- struct virtio_net *dev;
-
- dev = get_device(ctx);
- if (dev == NULL)
- return -1;
-
- state->index = index;
- /* State->index refers to the queue index. The TX queue is 1, RX queue is 0. */
- state->num = dev->virtqueue[state->index]->last_used_idx;
-
- return 0;
-}
-
-/*
- * This function uses the eventfd_link kernel module to copy an eventfd file descriptor
- * provided by QEMU in to our process space.
- */
-static int
-eventfd_copy(struct virtio_net *dev, struct eventfd_copy *eventfd_copy)
-{
- int eventfd_link, ret;
-
- /* Open the character device to the kernel module. */
- eventfd_link = open(eventfd_cdev, O_RDWR);
- if (eventfd_link < 0) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") eventfd_link module is not loaded\n", dev->device_fh);
- return -1;
- }
-
- /* Call the IOCTL to copy the eventfd. */
- ret = ioctl(eventfd_link, EVENTFD_COPY, eventfd_copy);
- close(eventfd_link);
-
- if (ret < 0) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") EVENTFD_COPY ioctl failed\n", dev->device_fh);
- return -1;
- }
-
-
- return 0;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_SET_VRING_CALL
- * The virtio device sends an eventfd to interrupt the guest. This fd gets copied in
- * to our process space.
- */
-static int
-set_vring_call(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
-{
- struct virtio_net *dev;
- struct eventfd_copy eventfd_kick;
- struct vhost_virtqueue *vq;
-
- dev = get_device(ctx);
- if (dev == NULL)
- return -1;
-
- /* file->index refers to the queue index. The TX queue is 1, RX queue is 0. */
- vq = dev->virtqueue[file->index];
-
- if (vq->kickfd)
- close((int)vq->kickfd);
-
- /* Populate the eventfd_copy structure and call eventfd_copy. */
- vq->kickfd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
- eventfd_kick.source_fd = vq->kickfd;
- eventfd_kick.target_fd = file->fd;
- eventfd_kick.target_pid = ctx.pid;
-
- if (eventfd_copy(dev, &eventfd_kick))
- return -1;
-
- return 0;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_SET_VRING_KICK
- * The virtio device sends an eventfd that it can use to notify us. This fd gets copied in
- * to our process space.
- */
-static int
-set_vring_kick(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
-{
- struct virtio_net *dev;
- struct eventfd_copy eventfd_call;
- struct vhost_virtqueue *vq;
-
- dev = get_device(ctx);
- if (dev == NULL)
- return -1;
-
- /* file->index refers to the queue index. The TX queue is 1, RX queue is 0. */
- vq = dev->virtqueue[file->index];
-
- if (vq->callfd)
- close((int)vq->callfd);
-
- /* Populate the eventfd_copy structure and call eventfd_copy. */
- vq->callfd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
- eventfd_call.source_fd = vq->callfd;
- eventfd_call.target_fd = file->fd;
- eventfd_call.target_pid = ctx.pid;
-
- if (eventfd_copy(dev, &eventfd_call))
- return -1;
-
- return 0;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_NET_SET_BACKEND
- * To complete device initialisation when the virtio driver is loaded we are provided with a
- * valid fd for a tap device (not used by us). If this happens then we can add the device to a
- * data core. When the virtio driver is removed we get fd=-1. At that point we remove the device
- * from the data core. The device will still exist in the device configuration linked list.
- */
-static int
-set_backend(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
-{
- struct virtio_net *dev;
-
- dev = get_device(ctx);
- if (dev == NULL) {
- return -1;
- }
-
- /* file->index refers to the queue index. The TX queue is 1, RX queue is 0. */
- dev->virtqueue[file->index]->backend = file->fd;
-
- /* If the device isn't already running and both backend fds are set we add the device. */
- if (!(dev->flags & VIRTIO_DEV_RUNNING)) {
- if (((int)dev->virtqueue[VIRTIO_TXQ]->backend != VIRTIO_DEV_STOPPED) &&
- ((int)dev->virtqueue[VIRTIO_RXQ]->backend != VIRTIO_DEV_STOPPED))
- return notify_ops->new_device(dev);
- /* Otherwise we remove it. */
- } else
- if (file->fd == VIRTIO_DEV_STOPPED) {
- notify_ops->destroy_device(dev);
- }
- return 0;
-}
-
-/*
- * Function pointers are set for the device operations to allow CUSE to call functions
- * when an IOCTL, device_add or device_release is received.
- */
-static const struct vhost_net_device_ops vhost_device_ops =
-{
- .new_device = new_device,
- .destroy_device = destroy_device,
-
- .get_features = get_features,
- .set_features = set_features,
-
- .set_mem_table = set_mem_table,
-
- .set_vring_num = set_vring_num,
- .set_vring_addr = set_vring_addr,
- .set_vring_base = set_vring_base,
- .get_vring_base = get_vring_base,
-
- .set_vring_kick = set_vring_kick,
- .set_vring_call = set_vring_call,
-
- .set_backend = set_backend,
-
- .set_owner = set_owner,
- .reset_owner = reset_owner,
-};
-
-/*
- * Called by main to setup callbacks when registering CUSE device.
- */
-struct vhost_net_device_ops const *
-get_virtio_net_callbacks(void)
-{
- return &vhost_device_ops;
-}
-
-/*
- * Register ops so that we can add/remove device to data core.
- */
-int
-init_virtio_net(struct virtio_net_device_ops const * const ops)
-{
- notify_ops = ops;
-
- return 0;
-}
-
-/*
- * Currently not used as we Ctrl+c to exit application.
- */
-int
-deinit_virtio_net(void)
-{
- return 0;
-}
diff --git a/examples/vhost/virtio-net.h b/examples/vhost/virtio-net.h
deleted file mode 100644
index 1a2f0dc..0000000
--- a/examples/vhost/virtio-net.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _VIRTIO_NET_H_
-#define _VIRTIO_NET_H_
-
-/* Used to indicate that the device is running on a data core */
-#define VIRTIO_DEV_RUNNING 1
-
-/* Backend value set by guest. */
-#define VIRTIO_DEV_STOPPED -1
-
-#define PAGE_SIZE 4096
-
-/* Enum for virtqueue management. */
-enum {VIRTIO_RXQ, VIRTIO_TXQ, VIRTIO_QNUM};
-
-#define BUF_VECTOR_MAX 256
-
-/*
- * Structure contains buffer address, length and descriptor index
- * from vring to do scatter RX.
-*/
-struct buf_vector {
-uint64_t buf_addr;
-uint32_t buf_len;
-uint32_t desc_idx;
-};
-
-/*
- * Structure contains variables relevant to TX/RX virtqueues.
- */
-struct vhost_virtqueue
-{
- struct vring_desc *desc; /* Virtqueue descriptor ring. */
- struct vring_avail *avail; /* Virtqueue available ring. */
- struct vring_used *used; /* Virtqueue used ring. */
- uint32_t size; /* Size of descriptor ring. */
- uint32_t backend; /* Backend value to determine if device should started/stopped. */
- uint16_t vhost_hlen; /* Vhost header length (varies depending on RX merge buffers. */
- volatile uint16_t last_used_idx; /* Last index used on the available ring */
- volatile uint16_t last_used_idx_res; /* Used for multiple devices reserving buffers. */
- eventfd_t callfd; /* Currently unused as polling mode is enabled. */
- eventfd_t kickfd; /* Used to notify the guest (trigger interrupt). */
- /* Used for scatter RX. */
- struct buf_vector buf_vec[BUF_VECTOR_MAX];
-} __rte_cache_aligned;
-
-/*
- * Device structure contains all configuration information relating to the device.
- */
-struct virtio_net
-{
- struct vhost_virtqueue *virtqueue[VIRTIO_QNUM]; /* Contains all virtqueue information. */
- struct virtio_memory *mem; /* QEMU memory and memory region information. */
- struct ether_addr mac_address; /* Device MAC address (Obtained on first TX packet). */
- uint64_t features; /* Negotiated feature set. */
- uint64_t device_fh; /* device identifier. */
- uint32_t vmdq_rx_q; /* RX VMDQ queue number. */
- uint32_t flags; /* Device flags. Only used to check if device is running on data core. */
- uint32_t vlan_tag; /* Vlan tag for device. Currently set to device_id (0-63). */
- uint16_t coreid; /* Data core that the device is added to. */
- volatile uint8_t ready; /* A device is set as ready if the MAC address has been set. */
- volatile uint8_t remove; /* Device is marked for removal from the data core. */
-} __rte_cache_aligned;
-
-/*
- * Device linked list structure for configuration.
- */
-struct virtio_net_config_ll
-{
- struct virtio_net dev; /* Virtio device. */
- struct virtio_net_config_ll *next; /* Next entry on linked list. */
-};
-
-/*
- * Information relating to memory regions including offsets to addresses in QEMUs memory file.
- */
-struct virtio_memory_regions {
- uint64_t guest_phys_address; /* Base guest physical address of region. */
- uint64_t guest_phys_address_end; /* End guest physical address of region. */
- uint64_t memory_size; /* Size of region. */
- uint64_t userspace_address; /* Base userspace address of region. */
- uint64_t address_offset; /* Offset of region for address translation. */
-};
-
-/*
- * Information relating to memory regions including offsets to
- * addresses in host physical space.
- */
-struct virtio_memory_regions_hpa {
- /* Base guest physical address of region. */
- uint64_t guest_phys_address;
- /* End guest physical address of region. */
- uint64_t guest_phys_address_end;
- /* Size of region. */
- uint64_t memory_size;
- /* Offset of region for gpa to hpa translation. */
- uint64_t host_phys_addr_offset;
-};
-
-/*
- * Memory structure includes region and mapping information.
- */
-struct virtio_memory {
- uint64_t base_address; /* Base QEMU userspace address of the memory file. */
- uint64_t mapped_address; /* Mapped address of memory file base in our applications memory space. */
- uint64_t mapped_size; /* Total size of memory file. */
- uint32_t nregions; /* Number of memory regions. */
- /* Number of memory regions for gpa to hpa translation. */
- uint32_t nregions_hpa;
- /* Memory region information for gpa to hpa translation. */
- struct virtio_memory_regions_hpa *regions_hpa;
- /* Memory region information. */
- struct virtio_memory_regions regions[0];
-};
-
-/*
- * Device operations to add/remove device.
- */
-struct virtio_net_device_ops {
- int (* new_device) (struct virtio_net *); /* Add device. */
- void (* destroy_device) (volatile struct virtio_net *); /* Remove device. */
-};
-
-int init_virtio_net(struct virtio_net_device_ops const * const);
-int deinit_virtio_net(void);
-
-struct vhost_net_device_ops const * get_virtio_net_callbacks(void);
-
-#endif /* _VIRTIO_NET_H_ */
diff --git a/lib/librte_vhost/Makefile b/lib/librte_vhost/Makefile
new file mode 100644
index 0000000..f45f83f
--- /dev/null
+++ b/lib/librte_vhost/Makefile
@@ -0,0 +1,60 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+ifneq ($(CONFIG_RTE_EXEC_ENV),"linuxapp")
+$(info This application can only operate in a linuxapp environment, \
+please change the definition of the RTE_TARGET environment variable)
+all:
+else
+
+# binary name
+APP = vhost-switch
+
+# all source are stored in SRCS-y
+#SRCS-y := cusedrv.c loopback-userspace.c
+SRCS-y := main.c virtio-net.c vhost-net-cdev.c
+
+CFLAGS += -O2 -I/usr/local/include -D_FILE_OFFSET_BITS=64 -Wno-unused-parameter
+CFLAGS += $(WERROR_FLAGS)
+LDFLAGS += -lfuse
+
+include $(RTE_SDK)/mk/rte.extapp.mk
+
+endif
diff --git a/lib/librte_vhost/eventfd_link/Makefile b/lib/librte_vhost/eventfd_link/Makefile
new file mode 100644
index 0000000..fc3927b
--- /dev/null
+++ b/lib/librte_vhost/eventfd_link/Makefile
@@ -0,0 +1,39 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+obj-m += eventfd_link.o
+
+
+all:
+ make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
+
+clean:
+ make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
diff --git a/lib/librte_vhost/eventfd_link/eventfd_link.c b/lib/librte_vhost/eventfd_link/eventfd_link.c
new file mode 100644
index 0000000..fc0653a
--- /dev/null
+++ b/lib/librte_vhost/eventfd_link/eventfd_link.c
@@ -0,0 +1,205 @@
+/*-
+ * * GPL LICENSE SUMMARY
+ * *
+ * * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * *
+ * * This program is free software; you can redistribute it and/or modify
+ * * it under the terms of version 2 of the GNU General Public License as
+ * * published by the Free Software Foundation.
+ * *
+ * * This program is distributed in the hope that it will be useful, but
+ * * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * * General Public License for more details.
+ * *
+ * * You should have received a copy of the GNU General Public License
+ * * along with this program; if not, write to the Free Software
+ * * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * * The full GNU General Public License is included in this distribution
+ * * in the file called LICENSE.GPL.
+ * *
+ * * Contact Information:
+ * * Intel Corporation
+ * */
+
+#include <linux/eventfd.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/rcupdate.h>
+#include <linux/file.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/mmu_context.h>
+#include <linux/sched.h>
+#include <asm/mmu_context.h>
+#include <linux/fdtable.h>
+
+#include "eventfd_link.h"
+
+
+/*
+ * get_files_struct is copied from fs/file.c
+ */
+struct files_struct *
+get_files_struct (struct task_struct *task)
+{
+ struct files_struct *files;
+
+ task_lock (task);
+ files = task->files;
+ if (files)
+ atomic_inc (&files->count);
+ task_unlock (task);
+
+ return files;
+}
+
+/*
+ * put_files_struct is extracted from fs/file.c
+ */
+void
+put_files_struct (struct files_struct *files)
+{
+ if (atomic_dec_and_test (&files->count))
+ {
+ BUG ();
+ }
+}
+
+
+static long
+eventfd_link_ioctl (struct file *f, unsigned int ioctl, unsigned long arg)
+{
+ void __user *argp = (void __user *) arg;
+ struct task_struct *task_target = NULL;
+ struct file *file;
+ struct files_struct *files;
+ struct fdtable *fdt;
+ struct eventfd_copy eventfd_copy;
+
+ switch (ioctl)
+ {
+ case EVENTFD_COPY:
+ if (copy_from_user (&eventfd_copy, argp, sizeof (struct eventfd_copy)))
+ return -EFAULT;
+
+ /*
+ * Find the task struct for the target pid
+ */
+ task_target =
+ pid_task (find_vpid (eventfd_copy.target_pid), PIDTYPE_PID);
+ if (task_target == NULL)
+ {
+ printk (KERN_DEBUG "Failed to get mem ctx for target pid\n");
+ return -EFAULT;
+ }
+
+ files = get_files_struct (current);
+ if (files == NULL)
+ {
+ printk (KERN_DEBUG "Failed to get files struct\n");
+ return -EFAULT;
+ }
+
+ rcu_read_lock ();
+ file = fcheck_files (files, eventfd_copy.source_fd);
+ if (file)
+ {
+ if (file->f_mode & FMODE_PATH
+ || !atomic_long_inc_not_zero (&file->f_count))
+ file = NULL;
+ }
+ rcu_read_unlock ();
+ put_files_struct (files);
+
+ if (file == NULL)
+ {
+ printk (KERN_DEBUG "Failed to get file from source pid\n");
+ return 0;
+ }
+
+ /*
+ * Release the existing eventfd in the source process
+ */
+ spin_lock (&files->file_lock);
+ filp_close (file, files);
+ fdt = files_fdtable (files);
+ fdt->fd[eventfd_copy.source_fd] = NULL;
+ spin_unlock (&files->file_lock);
+
+ /*
+ * Find the file struct associated with the target fd.
+ */
+
+ files = get_files_struct (task_target);
+ if (files == NULL)
+ {
+ printk (KERN_DEBUG "Failed to get files struct\n");
+ return -EFAULT;
+ }
+
+ rcu_read_lock ();
+ file = fcheck_files (files, eventfd_copy.target_fd);
+ if (file)
+ {
+ if (file->f_mode & FMODE_PATH
+ || !atomic_long_inc_not_zero (&file->f_count))
+ file = NULL;
+ }
+ rcu_read_unlock ();
+ put_files_struct (files);
+
+ if (file == NULL)
+ {
+ printk (KERN_DEBUG "Failed to get file from target pid\n");
+ return 0;
+ }
+
+
+ /*
+ * Install the file struct from the target process into the
+ * file desciptor of the source process,
+ */
+
+ fd_install (eventfd_copy.source_fd, file);
+
+ return 0;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+static const struct file_operations eventfd_link_fops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = eventfd_link_ioctl,
+};
+
+
+static struct miscdevice eventfd_link_misc = {
+ .name = "eventfd-link",
+ .fops = &eventfd_link_fops,
+};
+
+static int __init
+eventfd_link_init (void)
+{
+ return misc_register (&eventfd_link_misc);
+}
+
+module_init (eventfd_link_init);
+
+static void __exit
+eventfd_link_exit (void)
+{
+ misc_deregister (&eventfd_link_misc);
+}
+
+module_exit (eventfd_link_exit);
+
+MODULE_VERSION ("0.0.1");
+MODULE_LICENSE ("GPL v2");
+MODULE_AUTHOR ("Anthony Fee");
+MODULE_DESCRIPTION ("Link eventfd");
+MODULE_ALIAS ("devname:eventfd-link");
diff --git a/lib/librte_vhost/eventfd_link/eventfd_link.h b/lib/librte_vhost/eventfd_link/eventfd_link.h
new file mode 100644
index 0000000..a32a8dd
--- /dev/null
+++ b/lib/librte_vhost/eventfd_link/eventfd_link.h
@@ -0,0 +1,79 @@
+/*-
+ * * This file is provided under a dual BSD/GPLv2 license. When using or
+ * * redistributing this file, you may do so under either license.
+ * *
+ * * GPL LICENSE SUMMARY
+ * *
+ * * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * *
+ * * This program is free software; you can redistribute it and/or modify
+ * * it under the terms of version 2 of the GNU General Public License as
+ * * published by the Free Software Foundation.
+ * *
+ * * This program is distributed in the hope that it will be useful, but
+ * * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * * General Public License for more details.
+ * *
+ * * You should have received a copy of the GNU General Public License
+ * * along with this program; if not, write to the Free Software
+ * * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * * The full GNU General Public License is included in this distribution
+ * * in the file called LICENSE.GPL.
+ * *
+ * * Contact Information:
+ * * Intel Corporation
+ * *
+ * * BSD LICENSE
+ * *
+ * * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * * All rights reserved.
+ * *
+ * * Redistribution and use in source and binary forms, with or without
+ * * modification, are permitted provided that the following conditions
+ * * are met:
+ * *
+ * * * Redistributions of source code must retain the above copyright
+ * * notice, this list of conditions and the following disclaimer.
+ * * * Redistributions in binary form must reproduce the above copyright
+ * * notice, this list of conditions and the following disclaimer in
+ * * the documentation and/or other materials provided with the
+ * * distribution.
+ * * * Neither the name of Intel Corporation nor the names of its
+ * * contributors may be used to endorse or promote products derived
+ * * from this software without specific prior written permission.
+ * *
+ * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * *
+ * */
+
+#ifndef _EVENTFD_LINK_H_
+#define _EVENTFD_LINK_H_
+
+/*
+ * ioctl to copy an fd entry in calling process to an fd in a target process
+ */
+#define EVENTFD_COPY 1
+
+/*
+ * arguements for the EVENTFD_COPY ioctl
+ */
+struct eventfd_copy {
+ // fd in the target pid
+ unsigned target_fd;
+ // fd in the calling pid
+ unsigned source_fd;
+ // pid of the target pid
+ pid_t target_pid;
+};
+#endif /* _EVENTFD_LINK_H_ */
diff --git a/lib/librte_vhost/libvirt/qemu-wrap.py b/lib/librte_vhost/libvirt/qemu-wrap.py
new file mode 100755
index 0000000..e2d68a0
--- /dev/null
+++ b/lib/librte_vhost/libvirt/qemu-wrap.py
@@ -0,0 +1,367 @@
+#!/usr/bin/python
+#/*
+# * BSD LICENSE
+# *
+# * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# * All rights reserved.
+# *
+# * Redistribution and use in source and binary forms, with or without
+# * modification, are permitted provided that the following conditions
+# * are met:
+# *
+# * * Redistributions of source code must retain the above copyright
+# * notice, this list of conditions and the following disclaimer.
+# * * Redistributions in binary form must reproduce the above copyright
+# * notice, this list of conditions and the following disclaimer in
+# * the documentation and/or other materials provided with the
+# * distribution.
+# * * Neither the name of Intel Corporation nor the names of its
+# * contributors may be used to endorse or promote products derived
+# * from this software without specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# */
+
+#####################################################################
+# This script is designed to modify the call to the QEMU emulator
+# to support userspace vhost when starting a guest machine through
+# libvirt with vhost enabled. The steps to enable this are as follows
+# and should be run as root:
+#
+# 1. Place this script in a libvirtd's binary search PATH ($PATH)
+# A good location would be in the same directory that the QEMU
+# binary is located
+#
+# 2. Ensure that the script has the same owner/group and file
+# permissions as the QEMU binary
+#
+# 3. Update the VM xml file using "virsh edit VM.xml"
+#
+# 3.a) Set the VM to use the launch script
+#
+# Set the emulator path contained in the
+# <emulator><emulator/> tags
+#
+# e.g replace <emulator>/usr/bin/qemu-kvm<emulator/>
+# with <emulator>/usr/bin/qemu-wrap.py<emulator/>
+#
+# 3.b) Set the VM's device's to use vhost-net offload
+#
+# <interface type="network">
+# <model type="virtio"/>
+# <driver name="vhost"/>
+# <interface/>
+#
+# 4. Enable libvirt to access our userpace device file by adding it to
+# controllers cgroup for libvirtd using the following steps
+#
+# 4.a) In /etc/libvirt/qemu.conf add/edit the following lines:
+# 1) cgroup_controllers = [ ... "devices", ... ]
+# 2) clear_emulator_capabilities = 0
+# 3) user = "root"
+# 4) group = "root"
+# 5) cgroup_device_acl = [
+# "/dev/null", "/dev/full", "/dev/zero",
+# "/dev/random", "/dev/urandom",
+# "/dev/ptmx", "/dev/kvm", "/dev/kqemu",
+# "/dev/rtc", "/dev/hpet", "/dev/net/tun",
+# "/dev/<devbase-name>-<index>",
+# ]
+#
+# 4.b) Disable SELinux or set to permissive mode
+#
+# 4.c) Mount cgroup device controller
+# "mkdir /dev/cgroup"
+# "mount -t cgroup none /dev/cgroup -o devices"
+#
+# 4.d) Set hugetlbfs_mount variable - ( Optional )
+# VMs using userspace vhost must use hugepage backed
+# memory. This can be enabled in the libvirt XML
+# config by adding a memory backing section to the
+# XML config e.g.
+# <memoryBacking>
+# <hugepages/>
+# </memoryBacking>
+# This memory backing section should be added after the
+# <memory> and <currentMemory> sections. This will add
+# flags "-mem-prealloc -mem-path <path>" to the QEMU
+# command line. The hugetlbfs_mount variable can be used
+# to override the default <path> passed through by libvirt.
+#
+# if "-mem-prealloc" or "-mem-path <path>" are not passed
+# through and a vhost device is detected then these options will
+# be automatically added by this script. This script will detect
+# the system hugetlbfs mount point to be used for <path>. The
+# default <path> for this script can be overidden by the
+# hugetlbfs_dir variable in the configuration section of this script.
+#
+#
+# 4.e) Restart the libvirtd system process
+# e.g. on Fedora "systemctl restart libvirtd.service"
+#
+#
+# 4.f) Edit the Configuration Parameters section of this script
+# to point to the correct emulator location and set any
+# addition options
+#
+# The script modifies the libvirtd Qemu call by modifying/adding
+# options based on the configuration parameters below.
+# NOTE:
+# emul_path and us_vhost_path must be set
+# All other parameters are optional
+#####################################################################
+
+
+#############################################
+# Configuration Parameters
+#############################################
+#Path to QEMU binary
+emul_path = "/usr/local/bin/qemu-system-x86_64"
+
+#Path to userspace vhost device file
+# This filename should match the --dev-basename --dev-index parameters of
+# the command used to launch the userspace vhost sample application e.g.
+# if the sample app lauch command is:
+# ./build/vhost-switch ..... --dev-basename usvhost --dev-index 1
+# then this variable should be set to:
+# us_vhost_path = "/dev/usvhost-1"
+us_vhost_path = "/dev/usvhost-1"
+
+#List of additional user defined emulation options. These options will
+#be added to all Qemu calls
+emul_opts_user = []
+
+#List of additional user defined emulation options for vhost only.
+#These options will only be added to vhost enabled guests
+emul_opts_user_vhost = []
+
+#For all VHOST enabled VMs, the VM memory is preallocated from hugetlbfs
+# Set this variable to one to enable this option for all VMs
+use_huge_all = 0
+
+#Instead of autodetecting, override the hugetlbfs directory by setting
+#this variable
+hugetlbfs_dir = ""
+
+#############################################
+
+
+#############################################
+# ****** Do Not Modify Below this Line ******
+#############################################
+
+import sys, os, subprocess
+
+
+#List of open userspace vhost file descriptors
+fd_list = []
+
+#additional virtio device flags when using userspace vhost
+vhost_flags = [ "csum=off",
+ "gso=off",
+ "guest_tso4=off",
+ "guest_tso6=off",
+ "guest_ecn=off"
+ ]
+
+
+#############################################
+# Find the system hugefile mount point.
+# Note:
+# if multiple hugetlbfs mount points exist
+# then the first one found will be used
+#############################################
+def find_huge_mount():
+
+ if (len(hugetlbfs_dir)):
+ return hugetlbfs_dir
+
+ huge_mount = ""
+
+ if (os.access("/proc/mounts", os.F_OK)):
+ f = open("/proc/mounts", "r")
+ line = f.readline()
+ while line:
+ line_split = line.split(" ")
+ if line_split[2] == 'hugetlbfs':
+ huge_mount = line_split[1]
+ break
+ line = f.readline()
+ else:
+ print "/proc/mounts not found"
+ exit (1)
+
+ f.close
+ if len(huge_mount) == 0:
+ print "Failed to find hugetlbfs mount point"
+ exit (1)
+
+ return huge_mount
+
+
+#############################################
+# Get a userspace Vhost file descriptor
+#############################################
+def get_vhost_fd():
+
+ if (os.access(us_vhost_path, os.F_OK)):
+ fd = os.open( us_vhost_path, os.O_RDWR)
+ else:
+ print ("US-Vhost file %s not found" %us_vhost_path)
+ exit (1)
+
+ return fd
+
+
+#############################################
+# Check for vhostfd. if found then replace
+# with our own vhost fd and append any vhost
+# flags onto the end
+#############################################
+def modify_netdev_arg(arg):
+
+ global fd_list
+ vhost_in_use = 0
+ s = ''
+ new_opts = []
+ netdev_opts = arg.split(",")
+
+ for opt in netdev_opts:
+ #check if vhost is used
+ if "vhost" == opt[:5]:
+ vhost_in_use = 1
+ else:
+ new_opts.append(opt)
+
+ #if using vhost append vhost options
+ if vhost_in_use == 1:
+ #append vhost on option
+ new_opts.append('vhost=on')
+ #append vhostfd ption
+ new_fd = get_vhost_fd()
+ new_opts.append('vhostfd=' + str(new_fd))
+ fd_list.append(new_fd)
+
+ #concatenate all options
+ for opt in new_opts:
+ if len(s) > 0:
+ s+=','
+
+ s+=opt
+
+ return s
+
+
+#############################################
+# Main
+#############################################
+def main():
+
+ global fd_list
+ global vhost_in_use
+ new_args = []
+ num_cmd_args = len(sys.argv)
+ emul_call = ''
+ mem_prealloc_set = 0
+ mem_path_set = 0
+ num = 0;
+
+ #parse the parameters
+ while (num < num_cmd_args):
+ arg = sys.argv[num]
+
+ #Check netdev +1 parameter for vhostfd
+ if arg == '-netdev':
+ num_vhost_devs = len(fd_list)
+ new_args.append(arg)
+
+ num+=1
+ arg = sys.argv[num]
+ mod_arg = modify_netdev_arg(arg)
+ new_args.append(mod_arg)
+
+ #append vhost flags if this is a vhost device
+ # and -device is the next arg
+ # i.e -device -opt1,-opt2,...,-opt3,%vhost
+ if (num_vhost_devs < len(fd_list)):
+ num+=1
+ arg = sys.argv[num]
+ if arg == '-device':
+ new_args.append(arg)
+ num+=1
+ new_arg = sys.argv[num]
+ for flag in vhost_flags:
+ new_arg = ''.join([new_arg,',',flag])
+ new_args.append(new_arg)
+ else:
+ new_args.append(arg)
+ elif arg == '-mem-prealloc':
+ mem_prealloc_set = 1
+ new_args.append(arg)
+ elif arg == '-mem-path':
+ mem_path_set = 1
+ new_args.append(arg)
+
+ else:
+ new_args.append(arg)
+
+ num+=1
+
+ #Set Qemu binary location
+ emul_call+=emul_path
+ emul_call+=" "
+
+ #Add prealloc mem options if using vhost and not already added
+ if ((len(fd_list) > 0) and (mem_prealloc_set == 0)):
+ emul_call += "-mem-prealloc "
+
+ #Add mempath mem options if using vhost and not already added
+ if ((len(fd_list) > 0) and (mem_path_set == 0)):
+ #Detect and add hugetlbfs mount point
+ mp = find_huge_mount()
+ mp = "".join(["-mem-path ", mp])
+ emul_call += mp
+ emul_call += " "
+
+
+ #add user options
+ for opt in emul_opts_user:
+ emul_call += opt
+ emul_call += " "
+
+ #Add add user vhost only options
+ if len(fd_list) > 0:
+ for opt in emul_opts_user_vhost:
+ emul_call += opt
+ emul_call += " "
+
+ #Add updated libvirt options
+ iter_args = iter(new_args)
+ #skip 1st arg i.e. call to this script
+ next(iter_args)
+ for arg in iter_args:
+ emul_call+=str(arg)
+ emul_call+= " "
+
+ #Call QEMU
+ subprocess.call(emul_call, shell=True)
+
+
+ #Close usvhost files
+ for fd in fd_list:
+ os.close(fd)
+
+
+if __name__ == "__main__":
+ main()
+
diff --git a/lib/librte_vhost/main.c b/lib/librte_vhost/main.c
new file mode 100644
index 0000000..7d9e6a2
--- /dev/null
+++ b/lib/librte_vhost/main.c
@@ -0,0 +1,3722 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arpa/inet.h>
+#include <getopt.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/virtio_net.h>
+#include <linux/virtio_ring.h>
+#include <signal.h>
+#include <stdint.h>
+#include <sys/eventfd.h>
+#include <sys/param.h>
+#include <unistd.h>
+
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+#include <rte_ethdev.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+#include <rte_malloc.h>
+
+#include "main.h"
+#include "virtio-net.h"
+#include "vhost-net-cdev.h"
+
+#define MAX_QUEUES 128
+
+/* the maximum number of external ports supported */
+#define MAX_SUP_PORTS 1
+
+/*
+ * Calculate the number of buffers needed per port
+ */
+#define NUM_MBUFS_PER_PORT ((MAX_QUEUES*RTE_TEST_RX_DESC_DEFAULT) + \
+ (num_switching_cores*MAX_PKT_BURST) + \
+ (num_switching_cores*RTE_TEST_TX_DESC_DEFAULT) +\
+ (num_switching_cores*MBUF_CACHE_SIZE))
+
+#define MBUF_CACHE_SIZE 128
+#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+
+/*
+ * No frame data buffer allocated from host are required for zero copy
+ * implementation, guest will allocate the frame data buffer, and vhost
+ * directly use it.
+ */
+#define VIRTIO_DESCRIPTOR_LEN_ZCP 1518
+#define MBUF_SIZE_ZCP (VIRTIO_DESCRIPTOR_LEN_ZCP + sizeof(struct rte_mbuf) \
+ + RTE_PKTMBUF_HEADROOM)
+#define MBUF_CACHE_SIZE_ZCP 0
+
+/*
+ * RX and TX Prefetch, Host, and Write-back threshold values should be
+ * carefully set for optimal performance. Consult the network
+ * controller's datasheet and supporting DPDK documentation for guidance
+ * on how these parameters should be set.
+ */
+#define RX_PTHRESH 8 /* Default values of RX prefetch threshold reg. */
+#define RX_HTHRESH 8 /* Default values of RX host threshold reg. */
+#define RX_WTHRESH 4 /* Default values of RX write-back threshold reg. */
+
+/*
+ * These default values are optimized for use with the Intel(R) 82599 10 GbE
+ * Controller and the DPDK ixgbe PMD. Consider using other values for other
+ * network controllers and/or network drivers.
+ */
+#define TX_PTHRESH 36 /* Default values of TX prefetch threshold reg. */
+#define TX_HTHRESH 0 /* Default values of TX host threshold reg. */
+#define TX_WTHRESH 0 /* Default values of TX write-back threshold reg. */
+
+#define MAX_PKT_BURST 32 /* Max burst size for RX/TX */
+#define MAX_MRG_PKT_BURST 16 /* Max burst for merge buffers. Set to 1 due to performance issue. */
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
+
+#define BURST_RX_WAIT_US 15 /* Defines how long we wait between retries on RX */
+#define BURST_RX_RETRIES 4 /* Number of retries on RX. */
+
+#define JUMBO_FRAME_MAX_SIZE 0x2600
+
+/* State of virtio device. */
+#define DEVICE_MAC_LEARNING 0
+#define DEVICE_RX 1
+#define DEVICE_SAFE_REMOVE 2
+
+/* Config_core_flag status definitions. */
+#define REQUEST_DEV_REMOVAL 1
+#define ACK_DEV_REMOVAL 0
+
+/* Configurable number of RX/TX ring descriptors */
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 512
+
+/*
+ * Need refine these 2 macros for legacy and DPDK based front end:
+ * Max vring avail descriptor/entries from guest - MAX_PKT_BURST
+ * And then adjust power 2.
+ */
+/*
+ * For legacy front end, 128 descriptors,
+ * half for virtio header, another half for mbuf.
+ */
+#define RTE_TEST_RX_DESC_DEFAULT_ZCP 32 /* legacy: 32, DPDK virt FE: 128. */
+#define RTE_TEST_TX_DESC_DEFAULT_ZCP 64 /* legacy: 64, DPDK virt FE: 64. */
+
+/* Get first 4 bytes in mbuf headroom. */
+#define MBUF_HEADROOM_UINT32(mbuf) (*(uint32_t *)((uint8_t *)(mbuf) \
+ + sizeof(struct rte_mbuf)))
+
+/* true if x is a power of 2 */
+#define POWEROF2(x) ((((x)-1) & (x)) == 0)
+
+#define INVALID_PORT_ID 0xFF
+
+/* Max number of devices. Limited by vmdq. */
+#define MAX_DEVICES 64
+
+/* Size of buffers used for snprintfs. */
+#define MAX_PRINT_BUFF 6072
+
+/* Maximum character device basename size. */
+#define MAX_BASENAME_SZ 10
+
+/* Maximum long option length for option parsing. */
+#define MAX_LONG_OPT_SZ 64
+
+/* Used to compare MAC addresses. */
+#define MAC_ADDR_CMP 0xFFFFFFFFFFFFULL
+
+/* Number of descriptors per cacheline. */
+#define DESC_PER_CACHELINE (CACHE_LINE_SIZE / sizeof(struct vring_desc))
+
+/* mask of enabled ports */
+static uint32_t enabled_port_mask = 0;
+
+/*Number of switching cores enabled*/
+static uint32_t num_switching_cores = 0;
+
+/* number of devices/queues to support*/
+static uint32_t num_queues = 0;
+uint32_t num_devices = 0;
+
+/*
+ * Enable zero copy, pkts buffer will directly dma to hw descriptor,
+ * disabled on default.
+ */
+static uint32_t zero_copy;
+
+/* number of descriptors to apply*/
+static uint32_t num_rx_descriptor = RTE_TEST_RX_DESC_DEFAULT_ZCP;
+static uint32_t num_tx_descriptor = RTE_TEST_TX_DESC_DEFAULT_ZCP;
+
+/* max ring descriptor, ixgbe, i40e, e1000 all are 4096. */
+#define MAX_RING_DESC 4096
+
+struct vpool {
+ struct rte_mempool *pool;
+ struct rte_ring *ring;
+ uint32_t buf_size;
+} vpool_array[MAX_QUEUES+MAX_QUEUES];
+
+/* Enable VM2VM communications. If this is disabled then the MAC address compare is skipped. */
+typedef enum {
+ VM2VM_DISABLED = 0,
+ VM2VM_SOFTWARE = 1,
+ VM2VM_HARDWARE = 2,
+ VM2VM_LAST
+} vm2vm_type;
+static vm2vm_type vm2vm_mode = VM2VM_SOFTWARE;
+
+/* The type of host physical address translated from guest physical address. */
+typedef enum {
+ PHYS_ADDR_CONTINUOUS = 0,
+ PHYS_ADDR_CROSS_SUBREG = 1,
+ PHYS_ADDR_INVALID = 2,
+ PHYS_ADDR_LAST
+} hpa_type;
+
+/* Enable stats. */
+static uint32_t enable_stats = 0;
+/* Enable retries on RX. */
+static uint32_t enable_retry = 1;
+/* Specify timeout (in useconds) between retries on RX. */
+static uint32_t burst_rx_delay_time = BURST_RX_WAIT_US;
+/* Specify the number of retries on RX. */
+static uint32_t burst_rx_retry_num = BURST_RX_RETRIES;
+
+/* Character device basename. Can be set by user. */
+static char dev_basename[MAX_BASENAME_SZ] = "vhost-net";
+
+/* Charater device index. Can be set by user. */
+static uint32_t dev_index = 0;
+
+/* This can be set by the user so it is made available here. */
+extern uint64_t VHOST_FEATURES;
+
+/* Default configuration for rx and tx thresholds etc. */
+static struct rte_eth_rxconf rx_conf_default = {
+ .rx_thresh = {
+ .pthresh = RX_PTHRESH,
+ .hthresh = RX_HTHRESH,
+ .wthresh = RX_WTHRESH,
+ },
+ .rx_drop_en = 1,
+};
+
+/*
+ * These default values are optimized for use with the Intel(R) 82599 10 GbE
+ * Controller and the DPDK ixgbe/igb PMD. Consider using other values for other
+ * network controllers and/or network drivers.
+ */
+static struct rte_eth_txconf tx_conf_default = {
+ .tx_thresh = {
+ .pthresh = TX_PTHRESH,
+ .hthresh = TX_HTHRESH,
+ .wthresh = TX_WTHRESH,
+ },
+ .tx_free_thresh = 0, /* Use PMD default values */
+ .tx_rs_thresh = 0, /* Use PMD default values */
+};
+
+/* empty vmdq configuration structure. Filled in programatically */
+static struct rte_eth_conf vmdq_conf_default = {
+ .rxmode = {
+ .mq_mode = ETH_MQ_RX_VMDQ_ONLY,
+ .split_hdr_size = 0,
+ .header_split = 0, /**< Header Split disabled */
+ .hw_ip_checksum = 0, /**< IP checksum offload disabled */
+ .hw_vlan_filter = 0, /**< VLAN filtering disabled */
+ /*
+ * It is necessary for 1G NIC such as I350,
+ * this fixes bug of ipv4 forwarding in guest can't
+ * forward pakets from one virtio dev to another virtio dev.
+ */
+ .hw_vlan_strip = 1, /**< VLAN strip enabled. */
+ .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
+ .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ },
+
+ .txmode = {
+ .mq_mode = ETH_MQ_TX_NONE,
+ },
+ .rx_adv_conf = {
+ /*
+ * should be overridden separately in code with
+ * appropriate values
+ */
+ .vmdq_rx_conf = {
+ .nb_queue_pools = ETH_8_POOLS,
+ .enable_default_pool = 0,
+ .default_pool = 0,
+ .nb_pool_maps = 0,
+ .pool_map = {{0, 0},},
+ },
+ },
+};
+
+static unsigned lcore_ids[RTE_MAX_LCORE];
+static uint8_t ports[RTE_MAX_ETHPORTS];
+static unsigned num_ports = 0; /**< The number of ports specified in command line */
+
+static const uint16_t external_pkt_default_vlan_tag = 2000;
+const uint16_t vlan_tags[] = {
+ 1000, 1001, 1002, 1003, 1004, 1005, 1006, 1007,
+ 1008, 1009, 1010, 1011, 1012, 1013, 1014, 1015,
+ 1016, 1017, 1018, 1019, 1020, 1021, 1022, 1023,
+ 1024, 1025, 1026, 1027, 1028, 1029, 1030, 1031,
+ 1032, 1033, 1034, 1035, 1036, 1037, 1038, 1039,
+ 1040, 1041, 1042, 1043, 1044, 1045, 1046, 1047,
+ 1048, 1049, 1050, 1051, 1052, 1053, 1054, 1055,
+ 1056, 1057, 1058, 1059, 1060, 1061, 1062, 1063,
+};
+
+/* ethernet addresses of ports */
+static struct ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
+
+/* heads for the main used and free linked lists for the data path. */
+static struct virtio_net_data_ll *ll_root_used = NULL;
+static struct virtio_net_data_ll *ll_root_free = NULL;
+
+/* Array of data core structures containing information on individual core linked lists. */
+static struct lcore_info lcore_info[RTE_MAX_LCORE];
+
+/* Used for queueing bursts of TX packets. */
+struct mbuf_table {
+ unsigned len;
+ unsigned txq_id;
+ struct rte_mbuf *m_table[MAX_PKT_BURST];
+};
+
+/* TX queue for each data core. */
+struct mbuf_table lcore_tx_queue[RTE_MAX_LCORE];
+
+/* TX queue fori each virtio device for zero copy. */
+struct mbuf_table tx_queue_zcp[MAX_QUEUES];
+
+/* Vlan header struct used to insert vlan tags on TX. */
+struct vlan_ethhdr {
+ unsigned char h_dest[ETH_ALEN];
+ unsigned char h_source[ETH_ALEN];
+ __be16 h_vlan_proto;
+ __be16 h_vlan_TCI;
+ __be16 h_vlan_encapsulated_proto;
+};
+
+/* IPv4 Header */
+struct ipv4_hdr {
+ uint8_t version_ihl; /**< version and header length */
+ uint8_t type_of_service; /**< type of service */
+ uint16_t total_length; /**< length of packet */
+ uint16_t packet_id; /**< packet ID */
+ uint16_t fragment_offset; /**< fragmentation offset */
+ uint8_t time_to_live; /**< time to live */
+ uint8_t next_proto_id; /**< protocol ID */
+ uint16_t hdr_checksum; /**< header checksum */
+ uint32_t src_addr; /**< source address */
+ uint32_t dst_addr; /**< destination address */
+} __attribute__((__packed__));
+
+/* Header lengths. */
+#define VLAN_HLEN 4
+#define VLAN_ETH_HLEN 18
+
+/* Per-device statistics struct */
+struct device_statistics {
+ uint64_t tx_total;
+ rte_atomic64_t rx_total_atomic;
+ uint64_t rx_total;
+ uint64_t tx;
+ rte_atomic64_t rx_atomic;
+ uint64_t rx;
+} __rte_cache_aligned;
+struct device_statistics dev_statistics[MAX_DEVICES];
+
+/*
+ * Builds up the correct configuration for VMDQ VLAN pool map
+ * according to the pool & queue limits.
+ */
+static inline int
+get_eth_conf(struct rte_eth_conf *eth_conf, uint32_t num_devices)
+{
+ struct rte_eth_vmdq_rx_conf conf;
+ unsigned i;
+
+ memset(&conf, 0, sizeof(conf));
+ conf.nb_queue_pools = (enum rte_eth_nb_pools)num_devices;
+ conf.nb_pool_maps = num_devices;
+ conf.enable_loop_back =
+ vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back;
+
+ for (i = 0; i < conf.nb_pool_maps; i++) {
+ conf.pool_map[i].vlan_id = vlan_tags[ i ];
+ conf.pool_map[i].pools = (1UL << i);
+ }
+
+ (void)(rte_memcpy(eth_conf, &vmdq_conf_default, sizeof(*eth_conf)));
+ (void)(rte_memcpy(ð_conf->rx_adv_conf.vmdq_rx_conf, &conf,
+ sizeof(eth_conf->rx_adv_conf.vmdq_rx_conf)));
+ return 0;
+}
+
+/*
+ * Validate the device number according to the max pool number gotten form
+ * dev_info. If the device number is invalid, give the error message and
+ * return -1. Each device must have its own pool.
+ */
+static inline int
+validate_num_devices(uint32_t max_nb_devices)
+{
+ if (num_devices > max_nb_devices) {
+ RTE_LOG(ERR, VHOST_PORT, "invalid number of devices\n");
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Initialises a given port using global settings and with the rx buffers
+ * coming from the mbuf_pool passed as parameter
+ */
+static inline int
+port_init(uint8_t port)
+{
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_conf port_conf;
+ uint16_t rx_rings, tx_rings;
+ uint16_t rx_ring_size, tx_ring_size;
+ int retval;
+ uint16_t q;
+
+ /* The max pool number from dev_info will be used to validate the pool number specified in cmd line */
+ rte_eth_dev_info_get (port, &dev_info);
+
+ /*configure the number of supported virtio devices based on VMDQ limits */
+ num_devices = dev_info.max_vmdq_pools;
+ num_queues = dev_info.max_rx_queues;
+
+ if (zero_copy) {
+ rx_ring_size = num_rx_descriptor;
+ tx_ring_size = num_tx_descriptor;
+ tx_rings = dev_info.max_tx_queues;
+ } else {
+ rx_ring_size = RTE_TEST_RX_DESC_DEFAULT;
+ tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
+ tx_rings = (uint16_t)rte_lcore_count();
+ }
+
+ retval = validate_num_devices(MAX_DEVICES);
+ if (retval < 0)
+ return retval;
+
+ /* Get port configuration. */
+ retval = get_eth_conf(&port_conf, num_devices);
+ if (retval < 0)
+ return retval;
+
+ if (port >= rte_eth_dev_count()) return -1;
+
+ rx_rings = (uint16_t)num_queues,
+ /* Configure ethernet device. */
+ retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
+ if (retval != 0)
+ return retval;
+
+ /* Setup the queues. */
+ for (q = 0; q < rx_rings; q ++) {
+ retval = rte_eth_rx_queue_setup(port, q, rx_ring_size,
+ rte_eth_dev_socket_id(port), &rx_conf_default,
+ vpool_array[q].pool);
+ if (retval < 0)
+ return retval;
+ }
+ for (q = 0; q < tx_rings; q ++) {
+ retval = rte_eth_tx_queue_setup(port, q, tx_ring_size,
+ rte_eth_dev_socket_id(port), &tx_conf_default);
+ if (retval < 0)
+ return retval;
+ }
+
+ /* Start the device. */
+ retval = rte_eth_dev_start(port);
+ if (retval < 0) {
+ RTE_LOG(ERR, VHOST_DATA, "Failed to start the device.\n");
+ return retval;
+ }
+
+ rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
+ RTE_LOG(INFO, VHOST_PORT, "Max virtio devices supported: %u\n", num_devices);
+ RTE_LOG(INFO, VHOST_PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+ " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
+ (unsigned)port,
+ vmdq_ports_eth_addr[port].addr_bytes[0],
+ vmdq_ports_eth_addr[port].addr_bytes[1],
+ vmdq_ports_eth_addr[port].addr_bytes[2],
+ vmdq_ports_eth_addr[port].addr_bytes[3],
+ vmdq_ports_eth_addr[port].addr_bytes[4],
+ vmdq_ports_eth_addr[port].addr_bytes[5]);
+
+ return 0;
+}
+
+/*
+ * Set character device basename.
+ */
+static int
+us_vhost_parse_basename(const char *q_arg)
+{
+ /* parse number string */
+
+ if (strnlen(q_arg, MAX_BASENAME_SZ) > MAX_BASENAME_SZ)
+ return -1;
+ else
+ snprintf((char*)&dev_basename, MAX_BASENAME_SZ, "%s", q_arg);
+
+ return 0;
+}
+
+/*
+ * Parse the portmask provided at run time.
+ */
+static int
+parse_portmask(const char *portmask)
+{
+ char *end = NULL;
+ unsigned long pm;
+
+ errno = 0;
+
+ /* parse hexadecimal string */
+ pm = strtoul(portmask, &end, 16);
+ if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
+ return -1;
+
+ if (pm == 0)
+ return -1;
+
+ return pm;
+
+}
+
+/*
+ * Parse num options at run time.
+ */
+static int
+parse_num_opt(const char *q_arg, uint32_t max_valid_value)
+{
+ char *end = NULL;
+ unsigned long num;
+
+ errno = 0;
+
+ /* parse unsigned int string */
+ num = strtoul(q_arg, &end, 10);
+ if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
+ return -1;
+
+ if (num > max_valid_value)
+ return -1;
+
+ return num;
+
+}
+
+/*
+ * Display usage
+ */
+static void
+us_vhost_usage(const char *prgname)
+{
+ RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
+ " --vm2vm [0|1|2]\n"
+ " --rx_retry [0|1] --mergeable [0|1] --stats [0-N]\n"
+ " --dev-basename <name> --dev-index [0-N]\n"
+ " --nb-devices ND\n"
+ " -p PORTMASK: Set mask for ports to be used by application\n"
+ " --vm2vm [0|1|2]: disable/software(default)/hardware vm2vm comms\n"
+ " --rx-retry [0|1]: disable/enable(default) retries on rx. Enable retry if destintation queue is full\n"
+ " --rx-retry-delay [0-N]: timeout(in usecond) between retries on RX. This makes effect only if retries on rx enabled\n"
+ " --rx-retry-num [0-N]: the number of retries on rx. This makes effect only if retries on rx enabled\n"
+ " --mergeable [0|1]: disable(default)/enable RX mergeable buffers\n"
+ " --stats [0-N]: 0: Disable stats, N: Time in seconds to print stats\n"
+ " --dev-basename: The basename to be used for the character device.\n"
+ " --dev-index [0-N]: Defaults to zero if not used. Index is appended to basename.\n"
+ " --zero-copy [0|1]: disable(default)/enable rx/tx "
+ "zero copy\n"
+ " --rx-desc-num [0-N]: the number of descriptors on rx, "
+ "used only when zero copy is enabled.\n"
+ " --tx-desc-num [0-N]: the number of descriptors on tx, "
+ "used only when zero copy is enabled.\n",
+ prgname);
+}
+
+/*
+ * Parse the arguments given in the command line of the application.
+ */
+static int
+us_vhost_parse_args(int argc, char **argv)
+{
+ int opt, ret;
+ int option_index;
+ unsigned i;
+ const char *prgname = argv[0];
+ static struct option long_option[] = {
+ {"vm2vm", required_argument, NULL, 0},
+ {"rx-retry", required_argument, NULL, 0},
+ {"rx-retry-delay", required_argument, NULL, 0},
+ {"rx-retry-num", required_argument, NULL, 0},
+ {"mergeable", required_argument, NULL, 0},
+ {"stats", required_argument, NULL, 0},
+ {"dev-basename", required_argument, NULL, 0},
+ {"dev-index", required_argument, NULL, 0},
+ {"zero-copy", required_argument, NULL, 0},
+ {"rx-desc-num", required_argument, NULL, 0},
+ {"tx-desc-num", required_argument, NULL, 0},
+ {NULL, 0, 0, 0},
+ };
+
+ /* Parse command line */
+ while ((opt = getopt_long(argc, argv, "p:",long_option, &option_index)) != EOF) {
+ switch (opt) {
+ /* Portmask */
+ case 'p':
+ enabled_port_mask = parse_portmask(optarg);
+ if (enabled_port_mask == 0) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid portmask\n");
+ us_vhost_usage(prgname);
+ return -1;
+ }
+ break;
+
+ case 0:
+ /* Enable/disable vm2vm comms. */
+ if (!strncmp(long_option[option_index].name, "vm2vm",
+ MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, (VM2VM_LAST - 1));
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "Invalid argument for "
+ "vm2vm [0|1|2]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ vm2vm_mode = (vm2vm_type)ret;
+ }
+ }
+
+ /* Enable/disable retries on RX. */
+ if (!strncmp(long_option[option_index].name, "rx-retry", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 1);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry [0|1]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ enable_retry = ret;
+ }
+ }
+
+ /* Specify the retries delay time (in useconds) on RX. */
+ if (!strncmp(long_option[option_index].name, "rx-retry-delay", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, INT32_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry-delay [0-N]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ burst_rx_delay_time = ret;
+ }
+ }
+
+ /* Specify the retries number on RX. */
+ if (!strncmp(long_option[option_index].name, "rx-retry-num", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, INT32_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry-num [0-N]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ burst_rx_retry_num = ret;
+ }
+ }
+
+ /* Enable/disable RX mergeable buffers. */
+ if (!strncmp(long_option[option_index].name, "mergeable", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 1);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for mergeable [0|1]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ if (ret) {
+ vmdq_conf_default.rxmode.jumbo_frame = 1;
+ vmdq_conf_default.rxmode.max_rx_pkt_len
+ = JUMBO_FRAME_MAX_SIZE;
+ VHOST_FEATURES = (1ULL << VIRTIO_NET_F_MRG_RXBUF);
+ }
+ }
+ }
+
+ /* Enable/disable stats. */
+ if (!strncmp(long_option[option_index].name, "stats", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, INT32_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for stats [0..N]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ enable_stats = ret;
+ }
+ }
+
+ /* Set character device basename. */
+ if (!strncmp(long_option[option_index].name, "dev-basename", MAX_LONG_OPT_SZ)) {
+ if (us_vhost_parse_basename(optarg) == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device basename (Max %d characters)\n", MAX_BASENAME_SZ);
+ us_vhost_usage(prgname);
+ return -1;
+ }
+ }
+
+ /* Set character device index. */
+ if (!strncmp(long_option[option_index].name, "dev-index", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, INT32_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device index [0..N]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else
+ dev_index = ret;
+ }
+
+ /* Enable/disable rx/tx zero copy. */
+ if (!strncmp(long_option[option_index].name,
+ "zero-copy", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 1);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "Invalid argument"
+ " for zero-copy [0|1]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else
+ zero_copy = ret;
+
+ if (zero_copy) {
+#ifdef RTE_MBUF_SCATTER_GATHER
+ RTE_LOG(ERR, VHOST_CONFIG, "Before running "
+ "zero copy vhost APP, please "
+ "disable RTE_MBUF_SCATTER_GATHER\n"
+ "in config file and then rebuild DPDK "
+ "core lib!\n"
+ "Otherwise please disable zero copy "
+ "flag in command line!\n");
+ return -1;
+#endif
+ }
+ }
+
+ /* Specify the descriptor number on RX. */
+ if (!strncmp(long_option[option_index].name,
+ "rx-desc-num", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, MAX_RING_DESC);
+ if ((ret == -1) || (!POWEROF2(ret))) {
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "Invalid argument for rx-desc-num[0-N],"
+ "power of 2 required.\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ num_rx_descriptor = ret;
+ }
+ }
+
+ /* Specify the descriptor number on TX. */
+ if (!strncmp(long_option[option_index].name,
+ "tx-desc-num", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, MAX_RING_DESC);
+ if ((ret == -1) || (!POWEROF2(ret))) {
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "Invalid argument for tx-desc-num [0-N],"
+ "power of 2 required.\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ num_tx_descriptor = ret;
+ }
+ }
+
+ break;
+
+ /* Invalid option - print options. */
+ default:
+ us_vhost_usage(prgname);
+ return -1;
+ }
+ }
+
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
+ if (enabled_port_mask & (1 << i))
+ ports[num_ports++] = (uint8_t)i;
+ }
+
+ if ((num_ports == 0) || (num_ports > MAX_SUP_PORTS)) {
+ RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
+ "but only %u port can be enabled\n",num_ports, MAX_SUP_PORTS);
+ return -1;
+ }
+
+ if ((zero_copy == 1) && (vm2vm_mode == VM2VM_SOFTWARE)) {
+ RTE_LOG(INFO, VHOST_PORT,
+ "Vhost zero copy doesn't support software vm2vm,"
+ "please specify 'vm2vm 2' to use hardware vm2vm.\n");
+ return -1;
+ }
+
+ if ((zero_copy == 1) && (vmdq_conf_default.rxmode.jumbo_frame == 1)) {
+ RTE_LOG(INFO, VHOST_PORT,
+ "Vhost zero copy doesn't support jumbo frame,"
+ "please specify '--mergeable 0' to disable the "
+ "mergeable feature.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Update the global var NUM_PORTS and array PORTS according to system ports number
+ * and return valid ports number
+ */
+static unsigned check_ports_num(unsigned nb_ports)
+{
+ unsigned valid_num_ports = num_ports;
+ unsigned portid;
+
+ if (num_ports > nb_ports) {
+ RTE_LOG(INFO, VHOST_PORT, "\nSpecified port number(%u) exceeds total system port number(%u)\n",
+ num_ports, nb_ports);
+ num_ports = nb_ports;
+ }
+
+ for (portid = 0; portid < num_ports; portid ++) {
+ if (ports[portid] >= nb_ports) {
+ RTE_LOG(INFO, VHOST_PORT, "\nSpecified port ID(%u) exceeds max system port ID(%u)\n",
+ ports[portid], (nb_ports - 1));
+ ports[portid] = INVALID_PORT_ID;
+ valid_num_ports--;
+ }
+ }
+ return valid_num_ports;
+}
+
+/*
+ * Macro to print out packet contents. Wrapped in debug define so that the
+ * data path is not effected when debug is disabled.
+ */
+#ifdef DEBUG
+#define PRINT_PACKET(device, addr, size, header) do { \
+ char *pkt_addr = (char*)(addr); \
+ unsigned int index; \
+ char packet[MAX_PRINT_BUFF]; \
+ \
+ if ((header)) \
+ snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Header size %d: ", (device->device_fh), (size)); \
+ else \
+ snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Packet size %d: ", (device->device_fh), (size)); \
+ for (index = 0; index < (size); index++) { \
+ snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), \
+ "%02hhx ", pkt_addr[index]); \
+ } \
+ snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), "\n"); \
+ \
+ LOG_DEBUG(VHOST_DATA, "%s", packet); \
+} while(0)
+#else
+#define PRINT_PACKET(device, addr, size, header) do{} while(0)
+#endif
+
+/*
+ * Function to convert guest physical addresses to vhost virtual addresses. This
+ * is used to convert virtio buffer addresses.
+ */
+static inline uint64_t __attribute__((always_inline))
+gpa_to_vva(struct virtio_net *dev, uint64_t guest_pa)
+{
+ struct virtio_memory_regions *region;
+ uint32_t regionidx;
+ uint64_t vhost_va = 0;
+
+ for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
+ region = &dev->mem->regions[regionidx];
+ if ((guest_pa >= region->guest_phys_address) &&
+ (guest_pa <= region->guest_phys_address_end)) {
+ vhost_va = region->address_offset + guest_pa;
+ break;
+ }
+ }
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| VVA %p\n",
+ dev->device_fh, (void*)(uintptr_t)guest_pa, (void*)(uintptr_t)vhost_va);
+
+ return vhost_va;
+}
+
+/*
+ * Function to convert guest physical addresses to vhost physical addresses.
+ * This is used to convert virtio buffer addresses.
+ */
+static inline uint64_t __attribute__((always_inline))
+gpa_to_hpa(struct virtio_net *dev, uint64_t guest_pa,
+ uint32_t buf_len, hpa_type *addr_type)
+{
+ struct virtio_memory_regions_hpa *region;
+ uint32_t regionidx;
+ uint64_t vhost_pa = 0;
+
+ *addr_type = PHYS_ADDR_INVALID;
+
+ for (regionidx = 0; regionidx < dev->mem->nregions_hpa; regionidx++) {
+ region = &dev->mem->regions_hpa[regionidx];
+ if ((guest_pa >= region->guest_phys_address) &&
+ (guest_pa <= region->guest_phys_address_end)) {
+ vhost_pa = region->host_phys_addr_offset + guest_pa;
+ if (likely((guest_pa + buf_len - 1)
+ <= region->guest_phys_address_end))
+ *addr_type = PHYS_ADDR_CONTINUOUS;
+ else
+ *addr_type = PHYS_ADDR_CROSS_SUBREG;
+ break;
+ }
+ }
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| HPA %p\n",
+ dev->device_fh, (void *)(uintptr_t)guest_pa,
+ (void *)(uintptr_t)vhost_pa);
+
+ return vhost_pa;
+}
+
+/*
+ * This function adds buffers to the virtio devices RX virtqueue. Buffers can
+ * be received from the physical port or from another virtio device. A packet
+ * count is returned to indicate the number of packets that were succesfully
+ * added to the RX queue. This function works when mergeable is disabled.
+ */
+static inline uint32_t __attribute__((always_inline))
+virtio_dev_rx(struct virtio_net *dev, struct rte_mbuf **pkts, uint32_t count)
+{
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ struct rte_mbuf *buff;
+ /* The virtio_hdr is initialised to 0. */
+ struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {{0,0,0,0,0,0},0};
+ uint64_t buff_addr = 0;
+ uint64_t buff_hdr_addr = 0;
+ uint32_t head[MAX_PKT_BURST], packet_len = 0;
+ uint32_t head_idx, packet_success = 0;
+ uint32_t retry = 0;
+ uint16_t avail_idx, res_cur_idx;
+ uint16_t res_base_idx, res_end_idx;
+ uint16_t free_entries;
+ uint8_t success = 0;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
+ vq = dev->virtqueue[VIRTIO_RXQ];
+ count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
+
+ /* As many data cores may want access to available buffers, they need to be reserved. */
+ do {
+ res_base_idx = vq->last_used_idx_res;
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ free_entries = (avail_idx - res_base_idx);
+ /* If retry is enabled and the queue is full then we wait and retry to avoid packet loss. */
+ if (enable_retry && unlikely(count > free_entries)) {
+ for (retry = 0; retry < burst_rx_retry_num; retry++) {
+ rte_delay_us(burst_rx_delay_time);
+ avail_idx =
+ *((volatile uint16_t *)&vq->avail->idx);
+ free_entries = (avail_idx - res_base_idx);
+ if (count <= free_entries)
+ break;
+ }
+ }
+
+ /*check that we have enough buffers*/
+ if (unlikely(count > free_entries))
+ count = free_entries;
+
+ if (count == 0)
+ return 0;
+
+ res_end_idx = res_base_idx + count;
+ /* vq->last_used_idx_res is atomically updated. */
+ success = rte_atomic16_cmpset(&vq->last_used_idx_res, res_base_idx,
+ res_end_idx);
+ } while (unlikely(success == 0));
+ res_cur_idx = res_base_idx;
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n", dev->device_fh, res_cur_idx, res_end_idx);
+
+ /* Prefetch available ring to retrieve indexes. */
+ rte_prefetch0(&vq->avail->ring[res_cur_idx & (vq->size - 1)]);
+
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (head_idx = 0; head_idx < count; head_idx++)
+ head[head_idx] = vq->avail->ring[(res_cur_idx + head_idx) & (vq->size - 1)];
+
+ /*Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+
+ while (res_cur_idx != res_end_idx) {
+ /* Get descriptor from available ring */
+ desc = &vq->desc[head[packet_success]];
+
+ buff = pkts[packet_success];
+
+ /* Convert from gpa to vva (guest physical addr -> vhost virtual addr) */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ /* Prefetch buffer address. */
+ rte_prefetch0((void*)(uintptr_t)buff_addr);
+
+ /* Copy virtio_hdr to packet and increment buffer address */
+ buff_hdr_addr = buff_addr;
+ packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
+
+ /*
+ * If the descriptors are chained the header and data are
+ * placed in separate buffers.
+ */
+ if (desc->flags & VRING_DESC_F_NEXT) {
+ desc->len = vq->vhost_hlen;
+ desc = &vq->desc[desc->next];
+ /* Buffer address translation. */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ desc->len = rte_pktmbuf_data_len(buff);
+ } else {
+ buff_addr += vq->vhost_hlen;
+ desc->len = packet_len;
+ }
+
+ /* Update used ring with desc information */
+ vq->used->ring[res_cur_idx & (vq->size - 1)].id = head[packet_success];
+ vq->used->ring[res_cur_idx & (vq->size - 1)].len = packet_len;
+
+ /* Copy mbuf data to buffer */
+ rte_memcpy((void *)(uintptr_t)buff_addr,
+ (const void *)buff->pkt.data,
+ rte_pktmbuf_data_len(buff));
+ PRINT_PACKET(dev, (uintptr_t)buff_addr,
+ rte_pktmbuf_data_len(buff), 0);
+
+ res_cur_idx++;
+ packet_success++;
+
+ rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
+ (const void *)&virtio_hdr, vq->vhost_hlen);
+
+ PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
+
+ if (res_cur_idx < res_end_idx) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ }
+ }
+
+ rte_compiler_barrier();
+
+ /* Wait until it's our turn to add our buffer to the used ring. */
+ while (unlikely(vq->last_used_idx != res_base_idx))
+ rte_pause();
+
+ *(volatile uint16_t *)&vq->used->idx += count;
+ vq->last_used_idx = res_end_idx;
+
+ /* Kick the guest if necessary. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+ return count;
+}
+
+static inline uint32_t __attribute__((always_inline))
+copy_from_mbuf_to_vring(struct virtio_net *dev,
+ uint16_t res_base_idx, uint16_t res_end_idx,
+ struct rte_mbuf *pkt)
+{
+ uint32_t vec_idx = 0;
+ uint32_t entry_success = 0;
+ struct vhost_virtqueue *vq;
+ /* The virtio_hdr is initialised to 0. */
+ struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {
+ {0, 0, 0, 0, 0, 0}, 0};
+ uint16_t cur_idx = res_base_idx;
+ uint64_t vb_addr = 0;
+ uint64_t vb_hdr_addr = 0;
+ uint32_t seg_offset = 0;
+ uint32_t vb_offset = 0;
+ uint32_t seg_avail;
+ uint32_t vb_avail;
+ uint32_t cpy_len, entry_len;
+
+ if (pkt == NULL)
+ return 0;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| "
+ "End Index %d\n",
+ dev->device_fh, cur_idx, res_end_idx);
+
+ /*
+ * Convert from gpa to vva
+ * (guest physical addr -> vhost virtual addr)
+ */
+ vq = dev->virtqueue[VIRTIO_RXQ];
+ vb_addr =
+ gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
+ vb_hdr_addr = vb_addr;
+
+ /* Prefetch buffer address. */
+ rte_prefetch0((void *)(uintptr_t)vb_addr);
+
+ virtio_hdr.num_buffers = res_end_idx - res_base_idx;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") RX: Num merge buffers %d\n",
+ dev->device_fh, virtio_hdr.num_buffers);
+
+ rte_memcpy((void *)(uintptr_t)vb_hdr_addr,
+ (const void *)&virtio_hdr, vq->vhost_hlen);
+
+ PRINT_PACKET(dev, (uintptr_t)vb_hdr_addr, vq->vhost_hlen, 1);
+
+ seg_avail = rte_pktmbuf_data_len(pkt);
+ vb_offset = vq->vhost_hlen;
+ vb_avail =
+ vq->buf_vec[vec_idx].buf_len - vq->vhost_hlen;
+
+ entry_len = vq->vhost_hlen;
+
+ if (vb_avail == 0) {
+ uint32_t desc_idx =
+ vq->buf_vec[vec_idx].desc_idx;
+ vq->desc[desc_idx].len = vq->vhost_hlen;
+
+ if ((vq->desc[desc_idx].flags
+ & VRING_DESC_F_NEXT) == 0) {
+ /* Update used ring with desc information */
+ vq->used->ring[cur_idx & (vq->size - 1)].id
+ = vq->buf_vec[vec_idx].desc_idx;
+ vq->used->ring[cur_idx & (vq->size - 1)].len
+ = entry_len;
+
+ entry_len = 0;
+ cur_idx++;
+ entry_success++;
+ }
+
+ vec_idx++;
+ vb_addr =
+ gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
+
+ /* Prefetch buffer address. */
+ rte_prefetch0((void *)(uintptr_t)vb_addr);
+ vb_offset = 0;
+ vb_avail = vq->buf_vec[vec_idx].buf_len;
+ }
+
+ cpy_len = RTE_MIN(vb_avail, seg_avail);
+
+ while (cpy_len > 0) {
+ /* Copy mbuf data to vring buffer */
+ rte_memcpy((void *)(uintptr_t)(vb_addr + vb_offset),
+ (const void *)(rte_pktmbuf_mtod(pkt, char*) + seg_offset),
+ cpy_len);
+
+ PRINT_PACKET(dev,
+ (uintptr_t)(vb_addr + vb_offset),
+ cpy_len, 0);
+
+ seg_offset += cpy_len;
+ vb_offset += cpy_len;
+ seg_avail -= cpy_len;
+ vb_avail -= cpy_len;
+ entry_len += cpy_len;
+
+ if (seg_avail != 0) {
+ /*
+ * The virtio buffer in this vring
+ * entry reach to its end.
+ * But the segment doesn't complete.
+ */
+ if ((vq->desc[vq->buf_vec[vec_idx].desc_idx].flags &
+ VRING_DESC_F_NEXT) == 0) {
+ /* Update used ring with desc information */
+ vq->used->ring[cur_idx & (vq->size - 1)].id
+ = vq->buf_vec[vec_idx].desc_idx;
+ vq->used->ring[cur_idx & (vq->size - 1)].len
+ = entry_len;
+ entry_len = 0;
+ cur_idx++;
+ entry_success++;
+ }
+
+ vec_idx++;
+ vb_addr = gpa_to_vva(dev,
+ vq->buf_vec[vec_idx].buf_addr);
+ vb_offset = 0;
+ vb_avail = vq->buf_vec[vec_idx].buf_len;
+ cpy_len = RTE_MIN(vb_avail, seg_avail);
+ } else {
+ /*
+ * This current segment complete, need continue to
+ * check if the whole packet complete or not.
+ */
+ pkt = pkt->pkt.next;
+ if (pkt != NULL) {
+ /*
+ * There are more segments.
+ */
+ if (vb_avail == 0) {
+ /*
+ * This current buffer from vring is
+ * used up, need fetch next buffer
+ * from buf_vec.
+ */
+ uint32_t desc_idx =
+ vq->buf_vec[vec_idx].desc_idx;
+ vq->desc[desc_idx].len = vb_offset;
+
+ if ((vq->desc[desc_idx].flags &
+ VRING_DESC_F_NEXT) == 0) {
+ uint16_t wrapped_idx =
+ cur_idx & (vq->size - 1);
+ /*
+ * Update used ring with the
+ * descriptor information
+ */
+ vq->used->ring[wrapped_idx].id
+ = desc_idx;
+ vq->used->ring[wrapped_idx].len
+ = entry_len;
+ entry_success++;
+ entry_len = 0;
+ cur_idx++;
+ }
+
+ /* Get next buffer from buf_vec. */
+ vec_idx++;
+ vb_addr = gpa_to_vva(dev,
+ vq->buf_vec[vec_idx].buf_addr);
+ vb_avail =
+ vq->buf_vec[vec_idx].buf_len;
+ vb_offset = 0;
+ }
+
+ seg_offset = 0;
+ seg_avail = rte_pktmbuf_data_len(pkt);
+ cpy_len = RTE_MIN(vb_avail, seg_avail);
+ } else {
+ /*
+ * This whole packet completes.
+ */
+ uint32_t desc_idx =
+ vq->buf_vec[vec_idx].desc_idx;
+ vq->desc[desc_idx].len = vb_offset;
+
+ while (vq->desc[desc_idx].flags &
+ VRING_DESC_F_NEXT) {
+ desc_idx = vq->desc[desc_idx].next;
+ vq->desc[desc_idx].len = 0;
+ }
+
+ /* Update used ring with desc information */
+ vq->used->ring[cur_idx & (vq->size - 1)].id
+ = vq->buf_vec[vec_idx].desc_idx;
+ vq->used->ring[cur_idx & (vq->size - 1)].len
+ = entry_len;
+ entry_len = 0;
+ cur_idx++;
+ entry_success++;
+ seg_avail = 0;
+ cpy_len = RTE_MIN(vb_avail, seg_avail);
+ }
+ }
+ }
+
+ return entry_success;
+}
+
+/*
+ * This function adds buffers to the virtio devices RX virtqueue. Buffers can
+ * be received from the physical port or from another virtio device. A packet
+ * count is returned to indicate the number of packets that were succesfully
+ * added to the RX queue. This function works for mergeable RX.
+ */
+static inline uint32_t __attribute__((always_inline))
+virtio_dev_merge_rx(struct virtio_net *dev, struct rte_mbuf **pkts,
+ uint32_t count)
+{
+ struct vhost_virtqueue *vq;
+ uint32_t pkt_idx = 0, entry_success = 0;
+ uint32_t retry = 0;
+ uint16_t avail_idx, res_cur_idx;
+ uint16_t res_base_idx, res_end_idx;
+ uint8_t success = 0;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_rx()\n",
+ dev->device_fh);
+ vq = dev->virtqueue[VIRTIO_RXQ];
+ count = RTE_MIN((uint32_t)MAX_PKT_BURST, count);
+
+ if (count == 0)
+ return 0;
+
+ for (pkt_idx = 0; pkt_idx < count; pkt_idx++) {
+ uint32_t secure_len = 0;
+ uint16_t need_cnt;
+ uint32_t vec_idx = 0;
+ uint32_t pkt_len = pkts[pkt_idx]->pkt.pkt_len + vq->vhost_hlen;
+ uint16_t i, id;
+
+ do {
+ /*
+ * As many data cores may want access to available
+ * buffers, they need to be reserved.
+ */
+ res_base_idx = vq->last_used_idx_res;
+ res_cur_idx = res_base_idx;
+
+ do {
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+ if (unlikely(res_cur_idx == avail_idx)) {
+ /*
+ * If retry is enabled and the queue is
+ * full then we wait and retry to avoid
+ * packet loss.
+ */
+ if (enable_retry) {
+ uint8_t cont = 0;
+ for (retry = 0; retry < burst_rx_retry_num; retry++) {
+ rte_delay_us(burst_rx_delay_time);
+ avail_idx =
+ *((volatile uint16_t *)&vq->avail->idx);
+ if (likely(res_cur_idx != avail_idx)) {
+ cont = 1;
+ break;
+ }
+ }
+ if (cont == 1)
+ continue;
+ }
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") Failed "
+ "to get enough desc from "
+ "vring\n",
+ dev->device_fh);
+ return pkt_idx;
+ } else {
+ uint16_t wrapped_idx =
+ (res_cur_idx) & (vq->size - 1);
+ uint32_t idx =
+ vq->avail->ring[wrapped_idx];
+ uint8_t next_desc;
+
+ do {
+ next_desc = 0;
+ secure_len += vq->desc[idx].len;
+ if (vq->desc[idx].flags &
+ VRING_DESC_F_NEXT) {
+ idx = vq->desc[idx].next;
+ next_desc = 1;
+ }
+ } while (next_desc);
+
+ res_cur_idx++;
+ }
+ } while (pkt_len > secure_len);
+
+ /* vq->last_used_idx_res is atomically updated. */
+ success = rte_atomic16_cmpset(&vq->last_used_idx_res,
+ res_base_idx,
+ res_cur_idx);
+ } while (success == 0);
+
+ id = res_base_idx;
+ need_cnt = res_cur_idx - res_base_idx;
+
+ for (i = 0; i < need_cnt; i++, id++) {
+ uint16_t wrapped_idx = id & (vq->size - 1);
+ uint32_t idx = vq->avail->ring[wrapped_idx];
+ uint8_t next_desc;
+ do {
+ next_desc = 0;
+ vq->buf_vec[vec_idx].buf_addr =
+ vq->desc[idx].addr;
+ vq->buf_vec[vec_idx].buf_len =
+ vq->desc[idx].len;
+ vq->buf_vec[vec_idx].desc_idx = idx;
+ vec_idx++;
+
+ if (vq->desc[idx].flags & VRING_DESC_F_NEXT) {
+ idx = vq->desc[idx].next;
+ next_desc = 1;
+ }
+ } while (next_desc);
+ }
+
+ res_end_idx = res_cur_idx;
+
+ entry_success = copy_from_mbuf_to_vring(dev, res_base_idx,
+ res_end_idx, pkts[pkt_idx]);
+
+ rte_compiler_barrier();
+
+ /*
+ * Wait until it's our turn to add our buffer
+ * to the used ring.
+ */
+ while (unlikely(vq->last_used_idx != res_base_idx))
+ rte_pause();
+
+ *(volatile uint16_t *)&vq->used->idx += entry_success;
+ vq->last_used_idx = res_end_idx;
+
+ /* Kick the guest if necessary. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+ }
+
+ return count;
+}
+
+/*
+ * Compares a packet destination MAC address to a device MAC address.
+ */
+static inline int __attribute__((always_inline))
+ether_addr_cmp(struct ether_addr *ea, struct ether_addr *eb)
+{
+ return (((*(uint64_t *)ea ^ *(uint64_t *)eb) & MAC_ADDR_CMP) == 0);
+}
+
+/*
+ * This function learns the MAC address of the device and registers this along with a
+ * vlan tag to a VMDQ.
+ */
+static int
+link_vmdq(struct virtio_net *dev, struct rte_mbuf *m)
+{
+ struct ether_hdr *pkt_hdr;
+ struct virtio_net_data_ll *dev_ll;
+ int i, ret;
+
+ /* Learn MAC address of guest device from packet */
+ pkt_hdr = (struct ether_hdr *)m->pkt.data;
+
+ dev_ll = ll_root_used;
+
+ while (dev_ll != NULL) {
+ if (ether_addr_cmp(&(pkt_hdr->s_addr), &dev_ll->dev->mac_address)) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") WARNING: This device is using an existing MAC address and has not been registered.\n", dev->device_fh);
+ return -1;
+ }
+ dev_ll = dev_ll->next;
+ }
+
+ for (i = 0; i < ETHER_ADDR_LEN; i++)
+ dev->mac_address.addr_bytes[i] = pkt_hdr->s_addr.addr_bytes[i];
+
+ /* vlan_tag currently uses the device_id. */
+ dev->vlan_tag = vlan_tags[dev->device_fh];
+
+ /* Print out VMDQ registration info. */
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") MAC_ADDRESS %02x:%02x:%02x:%02x:%02x:%02x and VLAN_TAG %d registered\n",
+ dev->device_fh,
+ dev->mac_address.addr_bytes[0], dev->mac_address.addr_bytes[1],
+ dev->mac_address.addr_bytes[2], dev->mac_address.addr_bytes[3],
+ dev->mac_address.addr_bytes[4], dev->mac_address.addr_bytes[5],
+ dev->vlan_tag);
+
+ /* Register the MAC address. */
+ ret = rte_eth_dev_mac_addr_add(ports[0], &dev->mac_address, (uint32_t)dev->device_fh);
+ if (ret)
+ RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Failed to add device MAC address to VMDQ\n",
+ dev->device_fh);
+
+ /* Enable stripping of the vlan tag as we handle routing. */
+ rte_eth_dev_set_vlan_strip_on_queue(ports[0], (uint16_t)dev->vmdq_rx_q, 1);
+
+ /* Set device as ready for RX. */
+ dev->ready = DEVICE_RX;
+
+ return 0;
+}
+
+/*
+ * Removes MAC address and vlan tag from VMDQ. Ensures that nothing is adding buffers to the RX
+ * queue before disabling RX on the device.
+ */
+static inline void
+unlink_vmdq(struct virtio_net *dev)
+{
+ unsigned i = 0;
+ unsigned rx_count;
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+
+ if (dev->ready == DEVICE_RX) {
+ /*clear MAC and VLAN settings*/
+ rte_eth_dev_mac_addr_remove(ports[0], &dev->mac_address);
+ for (i = 0; i < 6; i++)
+ dev->mac_address.addr_bytes[i] = 0;
+
+ dev->vlan_tag = 0;
+
+ /*Clear out the receive buffers*/
+ rx_count = rte_eth_rx_burst(ports[0],
+ (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+
+ while (rx_count) {
+ for (i = 0; i < rx_count; i++)
+ rte_pktmbuf_free(pkts_burst[i]);
+
+ rx_count = rte_eth_rx_burst(ports[0],
+ (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+ }
+
+ dev->ready = DEVICE_MAC_LEARNING;
+ }
+}
+
+/*
+ * Check if the packet destination MAC address is for a local device. If so then put
+ * the packet on that devices RX queue. If not then return.
+ */
+static inline unsigned __attribute__((always_inline))
+virtio_tx_local(struct virtio_net *dev, struct rte_mbuf *m)
+{
+ struct virtio_net_data_ll *dev_ll;
+ struct ether_hdr *pkt_hdr;
+ uint64_t ret = 0;
+
+ pkt_hdr = (struct ether_hdr *)m->pkt.data;
+
+ /*get the used devices list*/
+ dev_ll = ll_root_used;
+
+ while (dev_ll != NULL) {
+ if ((dev_ll->dev->ready == DEVICE_RX) && ether_addr_cmp(&(pkt_hdr->d_addr),
+ &dev_ll->dev->mac_address)) {
+
+ /* Drop the packet if the TX packet is destined for the TX device. */
+ if (dev_ll->dev->device_fh == dev->device_fh) {
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: Source and destination MAC addresses are the same. Dropping packet.\n",
+ dev_ll->dev->device_fh);
+ return 0;
+ }
+
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is local\n", dev_ll->dev->device_fh);
+
+ if (dev_ll->dev->remove) {
+ /*drop the packet if the device is marked for removal*/
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Device is marked for removal\n", dev_ll->dev->device_fh);
+ } else {
+ uint32_t mergeable =
+ dev_ll->dev->features &
+ (1 << VIRTIO_NET_F_MRG_RXBUF);
+
+ /*send the packet to the local virtio device*/
+ if (likely(mergeable == 0))
+ ret = virtio_dev_rx(dev_ll->dev, &m, 1);
+ else
+ ret = virtio_dev_merge_rx(dev_ll->dev,
+ &m, 1);
+
+ if (enable_stats) {
+ rte_atomic64_add(
+ &dev_statistics[dev_ll->dev->device_fh].rx_total_atomic,
+ 1);
+ rte_atomic64_add(
+ &dev_statistics[dev_ll->dev->device_fh].rx_atomic,
+ ret);
+ dev_statistics[dev->device_fh].tx_total++;
+ dev_statistics[dev->device_fh].tx += ret;
+ }
+ }
+
+ return 0;
+ }
+ dev_ll = dev_ll->next;
+ }
+
+ return -1;
+}
+
+/*
+ * This function routes the TX packet to the correct interface. This may be a local device
+ * or the physical port.
+ */
+static inline void __attribute__((always_inline))
+virtio_tx_route(struct virtio_net* dev, struct rte_mbuf *m, struct rte_mempool *mbuf_pool, uint16_t vlan_tag)
+{
+ struct mbuf_table *tx_q;
+ struct vlan_ethhdr *vlan_hdr;
+ struct rte_mbuf **m_table;
+ struct rte_mbuf *mbuf, *prev;
+ unsigned len, ret, offset = 0;
+ const uint16_t lcore_id = rte_lcore_id();
+ struct virtio_net_data_ll *dev_ll = ll_root_used;
+ struct ether_hdr *pkt_hdr = (struct ether_hdr *)m->pkt.data;
+
+ /*check if destination is local VM*/
+ if ((vm2vm_mode == VM2VM_SOFTWARE) && (virtio_tx_local(dev, m) == 0))
+ return;
+
+ if (vm2vm_mode == VM2VM_HARDWARE) {
+ while (dev_ll != NULL) {
+ if ((dev_ll->dev->ready == DEVICE_RX)
+ && ether_addr_cmp(&(pkt_hdr->d_addr),
+ &dev_ll->dev->mac_address)) {
+ /*
+ * Drop the packet if the TX packet is
+ * destined for the TX device.
+ */
+ if (dev_ll->dev->device_fh == dev->device_fh) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") TX: Source and destination"
+ " MAC addresses are the same. Dropping "
+ "packet.\n",
+ dev_ll->dev->device_fh);
+ return;
+ }
+ offset = 4;
+ vlan_tag =
+ (uint16_t)
+ vlan_tags[(uint16_t)dev_ll->dev->device_fh];
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") TX: pkt to local VM device id:"
+ "(%"PRIu64") vlan tag: %d.\n",
+ dev->device_fh, dev_ll->dev->device_fh,
+ vlan_tag);
+
+ break;
+ }
+ dev_ll = dev_ll->next;
+ }
+ }
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is external\n", dev->device_fh);
+
+ /*Add packet to the port tx queue*/
+ tx_q = &lcore_tx_queue[lcore_id];
+ len = tx_q->len;
+
+ /* Allocate an mbuf and populate the structure. */
+ mbuf = rte_pktmbuf_alloc(mbuf_pool);
+ if (unlikely(mbuf == NULL)) {
+ RTE_LOG(ERR, VHOST_DATA,
+ "Failed to allocate memory for mbuf.\n");
+ return;
+ }
+
+ mbuf->pkt.data_len = m->pkt.data_len + VLAN_HLEN + offset;
+ mbuf->pkt.pkt_len = m->pkt.pkt_len + VLAN_HLEN + offset;
+ mbuf->pkt.nb_segs = m->pkt.nb_segs;
+
+ /* Copy ethernet header to mbuf. */
+ rte_memcpy((void*)mbuf->pkt.data, (const void*)m->pkt.data, ETH_HLEN);
+
+
+ /* Setup vlan header. Bytes need to be re-ordered for network with htons()*/
+ vlan_hdr = (struct vlan_ethhdr *) mbuf->pkt.data;
+ vlan_hdr->h_vlan_encapsulated_proto = vlan_hdr->h_vlan_proto;
+ vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q);
+ vlan_hdr->h_vlan_TCI = htons(vlan_tag);
+
+ /* Copy the remaining packet contents to the mbuf. */
+ rte_memcpy((void*) ((uint8_t*)mbuf->pkt.data + VLAN_ETH_HLEN),
+ (const void*) ((uint8_t*)m->pkt.data + ETH_HLEN), (m->pkt.data_len - ETH_HLEN));
+
+ /* Copy the remaining segments for the whole packet. */
+ prev = mbuf;
+ while (m->pkt.next) {
+ /* Allocate an mbuf and populate the structure. */
+ struct rte_mbuf *next_mbuf = rte_pktmbuf_alloc(mbuf_pool);
+ if (unlikely(next_mbuf == NULL)) {
+ rte_pktmbuf_free(mbuf);
+ RTE_LOG(ERR, VHOST_DATA,
+ "Failed to allocate memory for mbuf.\n");
+ return;
+ }
+
+ m = m->pkt.next;
+ prev->pkt.next = next_mbuf;
+ prev = next_mbuf;
+ next_mbuf->pkt.data_len = m->pkt.data_len;
+
+ /* Copy data to next mbuf. */
+ rte_memcpy(rte_pktmbuf_mtod(next_mbuf, void *),
+ rte_pktmbuf_mtod(m, const void *), m->pkt.data_len);
+ }
+
+ tx_q->m_table[len] = mbuf;
+ len++;
+ if (enable_stats) {
+ dev_statistics[dev->device_fh].tx_total++;
+ dev_statistics[dev->device_fh].tx++;
+ }
+
+ if (unlikely(len == MAX_PKT_BURST)) {
+ m_table = (struct rte_mbuf **)tx_q->m_table;
+ ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id, m_table, (uint16_t) len);
+ /* Free any buffers not handled by TX and update the port stats. */
+ if (unlikely(ret < len)) {
+ do {
+ rte_pktmbuf_free(m_table[ret]);
+ } while (++ret < len);
+ }
+
+ len = 0;
+ }
+
+ tx_q->len = len;
+ return;
+}
+
+static inline void __attribute__((always_inline))
+virtio_dev_tx(struct virtio_net* dev, struct rte_mempool *mbuf_pool)
+{
+ struct rte_mbuf m;
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ uint64_t buff_addr = 0;
+ uint32_t head[MAX_PKT_BURST];
+ uint32_t used_idx;
+ uint32_t i;
+ uint16_t free_entries, packet_success = 0;
+ uint16_t avail_idx;
+
+ vq = dev->virtqueue[VIRTIO_TXQ];
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ /* If there are no available buffers then return. */
+ if (vq->last_used_idx == avail_idx)
+ return;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
+
+ /* Prefetch available ring to retrieve head indexes. */
+ rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ /*get the number of free entries in the ring*/
+ free_entries = (avail_idx - vq->last_used_idx);
+
+ /* Limit to MAX_PKT_BURST. */
+ if (free_entries > MAX_PKT_BURST)
+ free_entries = MAX_PKT_BURST;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n", dev->device_fh, free_entries);
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (i = 0; i < free_entries; i++)
+ head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)];
+
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ while (packet_success < free_entries) {
+ desc = &vq->desc[head[packet_success]];
+
+ /* Discard first buffer as it is the virtio header */
+ desc = &vq->desc[desc->next];
+
+ /* Buffer address translation. */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ /* Prefetch buffer address. */
+ rte_prefetch0((void*)(uintptr_t)buff_addr);
+
+ used_idx = vq->last_used_idx & (vq->size - 1);
+
+ if (packet_success < (free_entries - 1)) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success+1]]);
+ rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]);
+ }
+
+ /* Update used index buffer information. */
+ vq->used->ring[used_idx].id = head[packet_success];
+ vq->used->ring[used_idx].len = 0;
+
+ /* Setup dummy mbuf. This is copied to a real mbuf if transmitted out the physical port. */
+ m.pkt.data_len = desc->len;
+ m.pkt.pkt_len = desc->len;
+ m.pkt.data = (void*)(uintptr_t)buff_addr;
+
+ PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
+
+ /* If this is the first received packet we need to learn the MAC and setup VMDQ */
+ if (dev->ready == DEVICE_MAC_LEARNING) {
+ if (dev->remove || (link_vmdq(dev, &m) == -1)) {
+ /*discard frame if device is scheduled for removal or a duplicate MAC address is found. */
+ packet_success += free_entries;
+ vq->last_used_idx += packet_success;
+ break;
+ }
+ }
+ virtio_tx_route(dev, &m, mbuf_pool, (uint16_t)dev->device_fh);
+
+ vq->last_used_idx++;
+ packet_success++;
+ }
+
+ rte_compiler_barrier();
+ vq->used->idx += packet_success;
+ /* Kick guest if required. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+}
+
+/* This function works for TX packets with mergeable feature enabled. */
+static inline void __attribute__((always_inline))
+virtio_dev_merge_tx(struct virtio_net *dev, struct rte_mempool *mbuf_pool)
+{
+ struct rte_mbuf *m, *prev;
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ uint64_t vb_addr = 0;
+ uint32_t head[MAX_PKT_BURST];
+ uint32_t used_idx;
+ uint32_t i;
+ uint16_t free_entries, entry_success = 0;
+ uint16_t avail_idx;
+ uint32_t buf_size = MBUF_SIZE - (sizeof(struct rte_mbuf)
+ + RTE_PKTMBUF_HEADROOM);
+
+ vq = dev->virtqueue[VIRTIO_TXQ];
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ /* If there are no available buffers then return. */
+ if (vq->last_used_idx == avail_idx)
+ return;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_tx()\n",
+ dev->device_fh);
+
+ /* Prefetch available ring to retrieve head indexes. */
+ rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ /*get the number of free entries in the ring*/
+ free_entries = (avail_idx - vq->last_used_idx);
+
+ /* Limit to MAX_PKT_BURST. */
+ free_entries = RTE_MIN(free_entries, MAX_PKT_BURST);
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n",
+ dev->device_fh, free_entries);
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (i = 0; i < free_entries; i++)
+ head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)];
+
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[entry_success]]);
+ rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ while (entry_success < free_entries) {
+ uint32_t vb_avail, vb_offset;
+ uint32_t seg_avail, seg_offset;
+ uint32_t cpy_len;
+ uint32_t seg_num = 0;
+ struct rte_mbuf *cur;
+ uint8_t alloc_err = 0;
+
+ desc = &vq->desc[head[entry_success]];
+
+ /* Discard first buffer as it is the virtio header */
+ desc = &vq->desc[desc->next];
+
+ /* Buffer address translation. */
+ vb_addr = gpa_to_vva(dev, desc->addr);
+ /* Prefetch buffer address. */
+ rte_prefetch0((void *)(uintptr_t)vb_addr);
+
+ used_idx = vq->last_used_idx & (vq->size - 1);
+
+ if (entry_success < (free_entries - 1)) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[entry_success+1]]);
+ rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]);
+ }
+
+ /* Update used index buffer information. */
+ vq->used->ring[used_idx].id = head[entry_success];
+ vq->used->ring[used_idx].len = 0;
+
+ vb_offset = 0;
+ vb_avail = desc->len;
+ seg_offset = 0;
+ seg_avail = buf_size;
+ cpy_len = RTE_MIN(vb_avail, seg_avail);
+
+ PRINT_PACKET(dev, (uintptr_t)vb_addr, desc->len, 0);
+
+ /* Allocate an mbuf and populate the structure. */
+ m = rte_pktmbuf_alloc(mbuf_pool);
+ if (unlikely(m == NULL)) {
+ RTE_LOG(ERR, VHOST_DATA,
+ "Failed to allocate memory for mbuf.\n");
+ return;
+ }
+
+ seg_num++;
+ cur = m;
+ prev = m;
+ while (cpy_len != 0) {
+ rte_memcpy((void *)(rte_pktmbuf_mtod(cur, char *) + seg_offset),
+ (void *)((uintptr_t)(vb_addr + vb_offset)),
+ cpy_len);
+
+ seg_offset += cpy_len;
+ vb_offset += cpy_len;
+ vb_avail -= cpy_len;
+ seg_avail -= cpy_len;
+
+ if (vb_avail != 0) {
+ /*
+ * The segment reachs to its end,
+ * while the virtio buffer in TX vring has
+ * more data to be copied.
+ */
+ cur->pkt.data_len = seg_offset;
+ m->pkt.pkt_len += seg_offset;
+ /* Allocate mbuf and populate the structure. */
+ cur = rte_pktmbuf_alloc(mbuf_pool);
+ if (unlikely(cur == NULL)) {
+ RTE_LOG(ERR, VHOST_DATA, "Failed to "
+ "allocate memory for mbuf.\n");
+ rte_pktmbuf_free(m);
+ alloc_err = 1;
+ break;
+ }
+
+ seg_num++;
+ prev->pkt.next = cur;
+ prev = cur;
+ seg_offset = 0;
+ seg_avail = buf_size;
+ } else {
+ if (desc->flags & VRING_DESC_F_NEXT) {
+ /*
+ * There are more virtio buffers in
+ * same vring entry need to be copied.
+ */
+ if (seg_avail == 0) {
+ /*
+ * The current segment hasn't
+ * room to accomodate more
+ * data.
+ */
+ cur->pkt.data_len = seg_offset;
+ m->pkt.pkt_len += seg_offset;
+ /*
+ * Allocate an mbuf and
+ * populate the structure.
+ */
+ cur = rte_pktmbuf_alloc(mbuf_pool);
+ if (unlikely(cur == NULL)) {
+ RTE_LOG(ERR,
+ VHOST_DATA,
+ "Failed to "
+ "allocate memory "
+ "for mbuf\n");
+ rte_pktmbuf_free(m);
+ alloc_err = 1;
+ break;
+ }
+ seg_num++;
+ prev->pkt.next = cur;
+ prev = cur;
+ seg_offset = 0;
+ seg_avail = buf_size;
+ }
+
+ desc = &vq->desc[desc->next];
+
+ /* Buffer address translation. */
+ vb_addr = gpa_to_vva(dev, desc->addr);
+ /* Prefetch buffer address. */
+ rte_prefetch0((void *)(uintptr_t)vb_addr);
+ vb_offset = 0;
+ vb_avail = desc->len;
+
+ PRINT_PACKET(dev, (uintptr_t)vb_addr,
+ desc->len, 0);
+ } else {
+ /* The whole packet completes. */
+ cur->pkt.data_len = seg_offset;
+ m->pkt.pkt_len += seg_offset;
+ vb_avail = 0;
+ }
+ }
+
+ cpy_len = RTE_MIN(vb_avail, seg_avail);
+ }
+
+ if (unlikely(alloc_err == 1))
+ break;
+
+ m->pkt.nb_segs = seg_num;
+
+ /*
+ * If this is the first received packet we need to learn
+ * the MAC and setup VMDQ
+ */
+ if (dev->ready == DEVICE_MAC_LEARNING) {
+ if (dev->remove || (link_vmdq(dev, m) == -1)) {
+ /*
+ * Discard frame if device is scheduled for
+ * removal or a duplicate MAC address is found.
+ */
+ entry_success = free_entries;
+ vq->last_used_idx += entry_success;
+ rte_pktmbuf_free(m);
+ break;
+ }
+ }
+
+ virtio_tx_route(dev, m, mbuf_pool, (uint16_t)dev->device_fh);
+ vq->last_used_idx++;
+ entry_success++;
+ rte_pktmbuf_free(m);
+ }
+
+ rte_compiler_barrier();
+ vq->used->idx += entry_success;
+ /* Kick guest if required. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+
+}
+
+/*
+ * This function is called by each data core. It handles all RX/TX registered with the
+ * core. For TX the specific lcore linked list is used. For RX, MAC addresses are compared
+ * with all devices in the main linked list.
+ */
+static int
+switch_worker(__attribute__((unused)) void *arg)
+{
+ struct rte_mempool *mbuf_pool = arg;
+ struct virtio_net *dev = NULL;
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct virtio_net_data_ll *dev_ll;
+ struct mbuf_table *tx_q;
+ volatile struct lcore_ll_info *lcore_ll;
+ const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
+ uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
+ unsigned ret, i;
+ const uint16_t lcore_id = rte_lcore_id();
+ const uint16_t num_cores = (uint16_t)rte_lcore_count();
+ uint16_t rx_count = 0;
+ uint32_t mergeable = 0;
+
+ RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
+ lcore_ll = lcore_info[lcore_id].lcore_ll;
+ prev_tsc = 0;
+
+ tx_q = &lcore_tx_queue[lcore_id];
+ for (i = 0; i < num_cores; i ++) {
+ if (lcore_ids[i] == lcore_id) {
+ tx_q->txq_id = i;
+ break;
+ }
+ }
+
+ while(1) {
+ cur_tsc = rte_rdtsc();
+ /*
+ * TX burst queue drain
+ */
+ diff_tsc = cur_tsc - prev_tsc;
+ if (unlikely(diff_tsc > drain_tsc)) {
+
+ if (tx_q->len) {
+ LOG_DEBUG(VHOST_DATA, "TX queue drained after timeout with burst size %u \n", tx_q->len);
+
+ /*Tx any packets in the queue*/
+ ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id,
+ (struct rte_mbuf **)tx_q->m_table,
+ (uint16_t)tx_q->len);
+ if (unlikely(ret < tx_q->len)) {
+ do {
+ rte_pktmbuf_free(tx_q->m_table[ret]);
+ } while (++ret < tx_q->len);
+ }
+
+ tx_q->len = 0;
+ }
+
+ prev_tsc = cur_tsc;
+
+ }
+
+ rte_prefetch0(lcore_ll->ll_root_used);
+ /*
+ * Inform the configuration core that we have exited the linked list and that no devices are
+ * in use if requested.
+ */
+ if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
+ lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
+
+ /*
+ * Process devices
+ */
+ dev_ll = lcore_ll->ll_root_used;
+
+ while (dev_ll != NULL) {
+ /*get virtio device ID*/
+ dev = dev_ll->dev;
+ mergeable =
+ dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF);
+
+ if (dev->remove) {
+ dev_ll = dev_ll->next;
+ unlink_vmdq(dev);
+ dev->ready = DEVICE_SAFE_REMOVE;
+ continue;
+ }
+ if (likely(dev->ready == DEVICE_RX)) {
+ /*Handle guest RX*/
+ rx_count = rte_eth_rx_burst(ports[0],
+ (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+
+ if (rx_count) {
+ if (likely(mergeable == 0))
+ ret_count =
+ virtio_dev_rx(dev,
+ pkts_burst, rx_count);
+ else
+ ret_count =
+ virtio_dev_merge_rx(dev,
+ pkts_burst, rx_count);
+
+ if (enable_stats) {
+ rte_atomic64_add(
+ &dev_statistics[dev_ll->dev->device_fh].rx_total_atomic,
+ rx_count);
+ rte_atomic64_add(
+ &dev_statistics[dev_ll->dev->device_fh].rx_atomic, ret_count);
+ }
+ while (likely(rx_count)) {
+ rx_count--;
+ rte_pktmbuf_free(pkts_burst[rx_count]);
+ }
+
+ }
+ }
+
+ if (!dev->remove) {
+ /*Handle guest TX*/
+ if (likely(mergeable == 0))
+ virtio_dev_tx(dev, mbuf_pool);
+ else
+ virtio_dev_merge_tx(dev, mbuf_pool);
+ }
+
+ /*move to the next device in the list*/
+ dev_ll = dev_ll->next;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * This function gets available ring number for zero copy rx.
+ * Only one thread will call this funciton for a paticular virtio device,
+ * so, it is designed as non-thread-safe function.
+ */
+static inline uint32_t __attribute__((always_inline))
+get_available_ring_num_zcp(struct virtio_net *dev)
+{
+ struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ];
+ uint16_t avail_idx;
+
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+ return (uint32_t)(avail_idx - vq->last_used_idx_res);
+}
+
+/*
+ * This function gets available ring index for zero copy rx,
+ * it will retry 'burst_rx_retry_num' times till it get enough ring index.
+ * Only one thread will call this funciton for a paticular virtio device,
+ * so, it is designed as non-thread-safe function.
+ */
+static inline uint32_t __attribute__((always_inline))
+get_available_ring_index_zcp(struct virtio_net *dev,
+ uint16_t *res_base_idx, uint32_t count)
+{
+ struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ];
+ uint16_t avail_idx;
+ uint32_t retry = 0;
+ uint16_t free_entries;
+
+ *res_base_idx = vq->last_used_idx_res;
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+ free_entries = (avail_idx - *res_base_idx);
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") in get_available_ring_index_zcp: "
+ "avail idx: %d, "
+ "res base idx:%d, free entries:%d\n",
+ dev->device_fh, avail_idx, *res_base_idx,
+ free_entries);
+
+ /*
+ * If retry is enabled and the queue is full then we wait
+ * and retry to avoid packet loss.
+ */
+ if (enable_retry && unlikely(count > free_entries)) {
+ for (retry = 0; retry < burst_rx_retry_num; retry++) {
+ rte_delay_us(burst_rx_delay_time);
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+ free_entries = (avail_idx - *res_base_idx);
+ if (count <= free_entries)
+ break;
+ }
+ }
+
+ /*check that we have enough buffers*/
+ if (unlikely(count > free_entries))
+ count = free_entries;
+
+ if (unlikely(count == 0)) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") Fail in get_available_ring_index_zcp: "
+ "avail idx: %d, res base idx:%d, free entries:%d\n",
+ dev->device_fh, avail_idx,
+ *res_base_idx, free_entries);
+ return 0;
+ }
+
+ vq->last_used_idx_res = *res_base_idx + count;
+
+ return count;
+}
+
+/*
+ * This function put descriptor back to used list.
+ */
+static inline void __attribute__((always_inline))
+put_desc_to_used_list_zcp(struct vhost_virtqueue *vq, uint16_t desc_idx)
+{
+ uint16_t res_cur_idx = vq->last_used_idx;
+ vq->used->ring[res_cur_idx & (vq->size - 1)].id = (uint32_t)desc_idx;
+ vq->used->ring[res_cur_idx & (vq->size - 1)].len = 0;
+ rte_compiler_barrier();
+ *(volatile uint16_t *)&vq->used->idx += 1;
+ vq->last_used_idx += 1;
+
+ /* Kick the guest if necessary. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+}
+
+/*
+ * This function get available descriptor from vitio vring and un-attached mbuf
+ * from vpool->ring, and then attach them together. It needs adjust the offset
+ * for buff_addr and phys_addr accroding to PMD implementation, otherwise the
+ * frame data may be put to wrong location in mbuf.
+ */
+static inline void __attribute__((always_inline))
+attach_rxmbuf_zcp(struct virtio_net *dev)
+{
+ uint16_t res_base_idx, desc_idx;
+ uint64_t buff_addr, phys_addr;
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ struct rte_mbuf *mbuf = NULL;
+ struct vpool *vpool;
+ hpa_type addr_type;
+
+ vpool = &vpool_array[dev->vmdq_rx_q];
+ vq = dev->virtqueue[VIRTIO_RXQ];
+
+ do {
+ if (unlikely(get_available_ring_index_zcp(dev, &res_base_idx,
+ 1) != 1))
+ return;
+ desc_idx = vq->avail->ring[(res_base_idx) & (vq->size - 1)];
+
+ desc = &vq->desc[desc_idx];
+ if (desc->flags & VRING_DESC_F_NEXT) {
+ desc = &vq->desc[desc->next];
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ phys_addr = gpa_to_hpa(dev, desc->addr, desc->len,
+ &addr_type);
+ } else {
+ buff_addr = gpa_to_vva(dev,
+ desc->addr + vq->vhost_hlen);
+ phys_addr = gpa_to_hpa(dev,
+ desc->addr + vq->vhost_hlen,
+ desc->len, &addr_type);
+ }
+
+ if (unlikely(addr_type == PHYS_ADDR_INVALID)) {
+ RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Invalid frame buffer"
+ " address found when attaching RX frame buffer"
+ " address!\n", dev->device_fh);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ continue;
+ }
+
+ /*
+ * Check if the frame buffer address from guest crosses
+ * sub-region or not.
+ */
+ if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) {
+ RTE_LOG(ERR, VHOST_DATA,
+ "(%"PRIu64") Frame buffer address cross "
+ "sub-regioin found when attaching RX frame "
+ "buffer address!\n",
+ dev->device_fh);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ continue;
+ }
+ } while (unlikely(phys_addr == 0));
+
+ rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf);
+ if (unlikely(mbuf == NULL)) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in attach_rxmbuf_zcp: "
+ "ring_sc_dequeue fail.\n",
+ dev->device_fh);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ return;
+ }
+
+ if (unlikely(vpool->buf_size > desc->len)) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in attach_rxmbuf_zcp: frame buffer "
+ "length(%d) of descriptor idx: %d less than room "
+ "size required: %d\n",
+ dev->device_fh, desc->len, desc_idx, vpool->buf_size);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ rte_ring_sp_enqueue(vpool->ring, (void *)mbuf);
+ return;
+ }
+
+ mbuf->buf_addr = (void *)(uintptr_t)(buff_addr - RTE_PKTMBUF_HEADROOM);
+ mbuf->pkt.data = (void *)(uintptr_t)(buff_addr);
+ mbuf->buf_physaddr = phys_addr - RTE_PKTMBUF_HEADROOM;
+ mbuf->pkt.data_len = desc->len;
+ MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in attach_rxmbuf_zcp: res base idx:%d, "
+ "descriptor idx:%d\n",
+ dev->device_fh, res_base_idx, desc_idx);
+
+ __rte_mbuf_raw_free(mbuf);
+
+ return;
+}
+
+/*
+ * Detach an attched packet mbuf -
+ * - restore original mbuf address and length values.
+ * - reset pktmbuf data and data_len to their default values.
+ * All other fields of the given packet mbuf will be left intact.
+ *
+ * @param m
+ * The attached packet mbuf.
+ */
+static inline void pktmbuf_detach_zcp(struct rte_mbuf *m)
+{
+ const struct rte_mempool *mp = m->pool;
+ void *buf = RTE_MBUF_TO_BADDR(m);
+ uint32_t buf_ofs;
+ uint32_t buf_len = mp->elt_size - sizeof(*m);
+ m->buf_physaddr = rte_mempool_virt2phy(mp, m) + sizeof(*m);
+
+ m->buf_addr = buf;
+ m->buf_len = (uint16_t)buf_len;
+
+ buf_ofs = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
+ RTE_PKTMBUF_HEADROOM : m->buf_len;
+ m->pkt.data = (char *) m->buf_addr + buf_ofs;
+
+ m->pkt.data_len = 0;
+}
+
+/*
+ * This function is called after packets have been transimited. It fetchs mbuf
+ * from vpool->pool, detached it and put into vpool->ring. It also update the
+ * used index and kick the guest if necessary.
+ */
+static inline uint32_t __attribute__((always_inline))
+txmbuf_clean_zcp(struct virtio_net *dev, struct vpool *vpool)
+{
+ struct rte_mbuf *mbuf;
+ struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
+ uint32_t used_idx = vq->last_used_idx & (vq->size - 1);
+ uint32_t index = 0;
+ uint32_t mbuf_count = rte_mempool_count(vpool->pool);
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool before "
+ "clean is: %d\n",
+ dev->device_fh, mbuf_count);
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring before "
+ "clean is : %d\n",
+ dev->device_fh, rte_ring_count(vpool->ring));
+
+ for (index = 0; index < mbuf_count; index++) {
+ mbuf = __rte_mbuf_raw_alloc(vpool->pool);
+ if (likely(RTE_MBUF_INDIRECT(mbuf)))
+ pktmbuf_detach_zcp(mbuf);
+ rte_ring_sp_enqueue(vpool->ring, mbuf);
+
+ /* Update used index buffer information. */
+ vq->used->ring[used_idx].id = MBUF_HEADROOM_UINT32(mbuf);
+ vq->used->ring[used_idx].len = 0;
+
+ used_idx = (used_idx + 1) & (vq->size - 1);
+ }
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool after "
+ "clean is: %d\n",
+ dev->device_fh, rte_mempool_count(vpool->pool));
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring after "
+ "clean is : %d\n",
+ dev->device_fh, rte_ring_count(vpool->ring));
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: before updated "
+ "vq->last_used_idx:%d\n",
+ dev->device_fh, vq->last_used_idx);
+
+ vq->last_used_idx += mbuf_count;
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: after updated "
+ "vq->last_used_idx:%d\n",
+ dev->device_fh, vq->last_used_idx);
+
+ rte_compiler_barrier();
+
+ *(volatile uint16_t *)&vq->used->idx += mbuf_count;
+
+ /* Kick guest if required. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+
+ return 0;
+}
+
+/*
+ * This function is called when a virtio device is destroy.
+ * It fetchs mbuf from vpool->pool, and detached it, and put into vpool->ring.
+ */
+static void mbuf_destroy_zcp(struct vpool *vpool)
+{
+ struct rte_mbuf *mbuf = NULL;
+ uint32_t index, mbuf_count = rte_mempool_count(vpool->pool);
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "in mbuf_destroy_zcp: mbuf count in mempool before "
+ "mbuf_destroy_zcp is: %d\n",
+ mbuf_count);
+ LOG_DEBUG(VHOST_CONFIG,
+ "in mbuf_destroy_zcp: mbuf count in ring before "
+ "mbuf_destroy_zcp is : %d\n",
+ rte_ring_count(vpool->ring));
+
+ for (index = 0; index < mbuf_count; index++) {
+ mbuf = __rte_mbuf_raw_alloc(vpool->pool);
+ if (likely(mbuf != NULL)) {
+ if (likely(RTE_MBUF_INDIRECT(mbuf)))
+ pktmbuf_detach_zcp(mbuf);
+ rte_ring_sp_enqueue(vpool->ring, (void *)mbuf);
+ }
+ }
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "in mbuf_destroy_zcp: mbuf count in mempool after "
+ "mbuf_destroy_zcp is: %d\n",
+ rte_mempool_count(vpool->pool));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in mbuf_destroy_zcp: mbuf count in ring after "
+ "mbuf_destroy_zcp is : %d\n",
+ rte_ring_count(vpool->ring));
+}
+
+/*
+ * This function update the use flag and counter.
+ */
+static inline uint32_t __attribute__((always_inline))
+virtio_dev_rx_zcp(struct virtio_net *dev, struct rte_mbuf **pkts,
+ uint32_t count)
+{
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ struct rte_mbuf *buff;
+ /* The virtio_hdr is initialised to 0. */
+ struct virtio_net_hdr_mrg_rxbuf virtio_hdr
+ = {{0, 0, 0, 0, 0, 0}, 0};
+ uint64_t buff_hdr_addr = 0;
+ uint32_t head[MAX_PKT_BURST], packet_len = 0;
+ uint32_t head_idx, packet_success = 0;
+ uint16_t res_cur_idx;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
+
+ if (count == 0)
+ return 0;
+
+ vq = dev->virtqueue[VIRTIO_RXQ];
+ count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
+
+ res_cur_idx = vq->last_used_idx;
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n",
+ dev->device_fh, res_cur_idx, res_cur_idx + count);
+
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (head_idx = 0; head_idx < count; head_idx++)
+ head[head_idx] = MBUF_HEADROOM_UINT32(pkts[head_idx]);
+
+ /*Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+
+ while (packet_success != count) {
+ /* Get descriptor from available ring */
+ desc = &vq->desc[head[packet_success]];
+
+ buff = pkts[packet_success];
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in dev_rx_zcp: update the used idx for "
+ "pkt[%d] descriptor idx: %d\n",
+ dev->device_fh, packet_success,
+ MBUF_HEADROOM_UINT32(buff));
+
+ PRINT_PACKET(dev,
+ (uintptr_t)(((uint64_t)(uintptr_t)buff->buf_addr)
+ + RTE_PKTMBUF_HEADROOM),
+ rte_pktmbuf_data_len(buff), 0);
+
+ /* Buffer address translation for virtio header. */
+ buff_hdr_addr = gpa_to_vva(dev, desc->addr);
+ packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
+
+ /*
+ * If the descriptors are chained the header and data are
+ * placed in separate buffers.
+ */
+ if (desc->flags & VRING_DESC_F_NEXT) {
+ desc->len = vq->vhost_hlen;
+ desc = &vq->desc[desc->next];
+ desc->len = rte_pktmbuf_data_len(buff);
+ } else {
+ desc->len = packet_len;
+ }
+
+ /* Update used ring with desc information */
+ vq->used->ring[res_cur_idx & (vq->size - 1)].id
+ = head[packet_success];
+ vq->used->ring[res_cur_idx & (vq->size - 1)].len
+ = packet_len;
+ res_cur_idx++;
+ packet_success++;
+
+ /* A header is required per buffer. */
+ rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
+ (const void *)&virtio_hdr, vq->vhost_hlen);
+
+ PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
+
+ if (likely(packet_success < count)) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ }
+ }
+
+ rte_compiler_barrier();
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in dev_rx_zcp: before update used idx: "
+ "vq.last_used_idx: %d, vq->used->idx: %d\n",
+ dev->device_fh, vq->last_used_idx, vq->used->idx);
+
+ *(volatile uint16_t *)&vq->used->idx += count;
+ vq->last_used_idx += count;
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in dev_rx_zcp: after update used idx: "
+ "vq.last_used_idx: %d, vq->used->idx: %d\n",
+ dev->device_fh, vq->last_used_idx, vq->used->idx);
+
+ /* Kick the guest if necessary. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+
+ return count;
+}
+
+/*
+ * This function routes the TX packet to the correct interface.
+ * This may be a local device or the physical port.
+ */
+static inline void __attribute__((always_inline))
+virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m,
+ uint32_t desc_idx, uint8_t need_copy)
+{
+ struct mbuf_table *tx_q;
+ struct rte_mbuf **m_table;
+ struct rte_mbuf *mbuf = NULL;
+ unsigned len, ret, offset = 0;
+ struct vpool *vpool;
+ struct virtio_net_data_ll *dev_ll = ll_root_used;
+ struct ether_hdr *pkt_hdr = (struct ether_hdr *)m->pkt.data;
+ uint16_t vlan_tag = (uint16_t)vlan_tags[(uint16_t)dev->device_fh];
+
+ /*Add packet to the port tx queue*/
+ tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
+ len = tx_q->len;
+
+ /* Allocate an mbuf and populate the structure. */
+ vpool = &vpool_array[MAX_QUEUES + (uint16_t)dev->vmdq_rx_q];
+ rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf);
+ if (unlikely(mbuf == NULL)) {
+ struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
+ RTE_LOG(ERR, VHOST_DATA,
+ "(%"PRIu64") Failed to allocate memory for mbuf.\n",
+ dev->device_fh);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ return;
+ }
+
+ if (vm2vm_mode == VM2VM_HARDWARE) {
+ /* Avoid using a vlan tag from any vm for external pkt, such as
+ * vlan_tags[dev->device_fh], oterwise, it conflicts when pool
+ * selection, MAC address determines it as an external pkt
+ * which should go to network, while vlan tag determine it as
+ * a vm2vm pkt should forward to another vm. Hardware confuse
+ * such a ambiguous situation, so pkt will lost.
+ */
+ vlan_tag = external_pkt_default_vlan_tag;
+ while (dev_ll != NULL) {
+ if (likely(dev_ll->dev->ready == DEVICE_RX) &&
+ ether_addr_cmp(&(pkt_hdr->d_addr),
+ &dev_ll->dev->mac_address)) {
+
+ /*
+ * Drop the packet if the TX packet is destined
+ * for the TX device.
+ */
+ if (unlikely(dev_ll->dev->device_fh
+ == dev->device_fh)) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") TX: Source and destination"
+ "MAC addresses are the same. Dropping "
+ "packet.\n",
+ dev_ll->dev->device_fh);
+ MBUF_HEADROOM_UINT32(mbuf)
+ = (uint32_t)desc_idx;
+ __rte_mbuf_raw_free(mbuf);
+ return;
+ }
+
+ /*
+ * Packet length offset 4 bytes for HW vlan
+ * strip when L2 switch back.
+ */
+ offset = 4;
+ vlan_tag =
+ (uint16_t)
+ vlan_tags[(uint16_t)dev_ll->dev->device_fh];
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") TX: pkt to local VM device id:"
+ "(%"PRIu64") vlan tag: %d.\n",
+ dev->device_fh, dev_ll->dev->device_fh,
+ vlan_tag);
+
+ break;
+ }
+ dev_ll = dev_ll->next;
+ }
+ }
+
+ mbuf->pkt.nb_segs = m->pkt.nb_segs;
+ mbuf->pkt.next = m->pkt.next;
+ mbuf->pkt.data_len = m->pkt.data_len + offset;
+ mbuf->pkt.pkt_len = mbuf->pkt.data_len;
+ if (unlikely(need_copy)) {
+ /* Copy the packet contents to the mbuf. */
+ rte_memcpy((void *)((uint8_t *)mbuf->pkt.data),
+ (const void *) ((uint8_t *)m->pkt.data),
+ m->pkt.data_len);
+ } else {
+ mbuf->pkt.data = m->pkt.data;
+ mbuf->buf_physaddr = m->buf_physaddr;
+ mbuf->buf_addr = m->buf_addr;
+ }
+ mbuf->ol_flags = PKT_TX_VLAN_PKT;
+ mbuf->pkt.vlan_macip.f.vlan_tci = vlan_tag;
+ mbuf->pkt.vlan_macip.f.l2_len = sizeof(struct ether_hdr);
+ mbuf->pkt.vlan_macip.f.l3_len = sizeof(struct ipv4_hdr);
+ MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
+
+ tx_q->m_table[len] = mbuf;
+ len++;
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in tx_route_zcp: pkt: nb_seg: %d, next:%s\n",
+ dev->device_fh,
+ mbuf->pkt.nb_segs,
+ (mbuf->pkt.next == NULL) ? "null" : "non-null");
+
+ if (enable_stats) {
+ dev_statistics[dev->device_fh].tx_total++;
+ dev_statistics[dev->device_fh].tx++;
+ }
+
+ if (unlikely(len == MAX_PKT_BURST)) {
+ m_table = (struct rte_mbuf **)tx_q->m_table;
+ ret = rte_eth_tx_burst(ports[0],
+ (uint16_t)tx_q->txq_id, m_table, (uint16_t) len);
+
+ /*
+ * Free any buffers not handled by TX and update
+ * the port stats.
+ */
+ if (unlikely(ret < len)) {
+ do {
+ rte_pktmbuf_free(m_table[ret]);
+ } while (++ret < len);
+ }
+
+ len = 0;
+ txmbuf_clean_zcp(dev, vpool);
+ }
+
+ tx_q->len = len;
+
+ return;
+}
+
+/*
+ * This function TX all available packets in virtio TX queue for one
+ * virtio-net device. If it is first packet, it learns MAC address and
+ * setup VMDQ.
+ */
+static inline void __attribute__((always_inline))
+virtio_dev_tx_zcp(struct virtio_net *dev)
+{
+ struct rte_mbuf m;
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ uint64_t buff_addr = 0, phys_addr;
+ uint32_t head[MAX_PKT_BURST];
+ uint32_t i;
+ uint16_t free_entries, packet_success = 0;
+ uint16_t avail_idx;
+ uint8_t need_copy = 0;
+ hpa_type addr_type;
+
+ vq = dev->virtqueue[VIRTIO_TXQ];
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ /* If there are no available buffers then return. */
+ if (vq->last_used_idx_res == avail_idx)
+ return;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
+
+ /* Prefetch available ring to retrieve head indexes. */
+ rte_prefetch0(&vq->avail->ring[vq->last_used_idx_res & (vq->size - 1)]);
+
+ /* Get the number of free entries in the ring */
+ free_entries = (avail_idx - vq->last_used_idx_res);
+
+ /* Limit to MAX_PKT_BURST. */
+ free_entries
+ = (free_entries > MAX_PKT_BURST) ? MAX_PKT_BURST : free_entries;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n",
+ dev->device_fh, free_entries);
+
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (i = 0; i < free_entries; i++)
+ head[i]
+ = vq->avail->ring[(vq->last_used_idx_res + i)
+ & (vq->size - 1)];
+
+ vq->last_used_idx_res += free_entries;
+
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ while (packet_success < free_entries) {
+ desc = &vq->desc[head[packet_success]];
+
+ /* Discard first buffer as it is the virtio header */
+ desc = &vq->desc[desc->next];
+
+ /* Buffer address translation. */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ phys_addr = gpa_to_hpa(dev, desc->addr, desc->len, &addr_type);
+
+ if (likely(packet_success < (free_entries - 1)))
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success + 1]]);
+
+ if (unlikely(addr_type == PHYS_ADDR_INVALID)) {
+ RTE_LOG(ERR, VHOST_DATA,
+ "(%"PRIu64") Invalid frame buffer address found"
+ "when TX packets!\n",
+ dev->device_fh);
+ packet_success++;
+ continue;
+ }
+
+ /* Prefetch buffer address. */
+ rte_prefetch0((void *)(uintptr_t)buff_addr);
+
+ /*
+ * Setup dummy mbuf. This is copied to a real mbuf if
+ * transmitted out the physical port.
+ */
+ m.pkt.data_len = desc->len;
+ m.pkt.nb_segs = 1;
+ m.pkt.next = NULL;
+ m.pkt.data = (void *)(uintptr_t)buff_addr;
+ m.buf_addr = m.pkt.data;
+ m.buf_physaddr = phys_addr;
+
+ /*
+ * Check if the frame buffer address from guest crosses
+ * sub-region or not.
+ */
+ if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) {
+ RTE_LOG(ERR, VHOST_DATA,
+ "(%"PRIu64") Frame buffer address cross "
+ "sub-regioin found when attaching TX frame "
+ "buffer address!\n",
+ dev->device_fh);
+ need_copy = 1;
+ } else
+ need_copy = 0;
+
+ PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
+
+ /*
+ * If this is the first received packet we need to learn
+ * the MAC and setup VMDQ
+ */
+ if (unlikely(dev->ready == DEVICE_MAC_LEARNING)) {
+ if (dev->remove || (link_vmdq(dev, &m) == -1)) {
+ /*
+ * Discard frame if device is scheduled for
+ * removal or a duplicate MAC address is found.
+ */
+ packet_success += free_entries;
+ vq->last_used_idx += packet_success;
+ break;
+ }
+ }
+
+ virtio_tx_route_zcp(dev, &m, head[packet_success], need_copy);
+ packet_success++;
+ }
+}
+
+/*
+ * This function is called by each data core. It handles all RX/TX registered
+ * with the core. For TX the specific lcore linked list is used. For RX, MAC
+ * addresses are compared with all devices in the main linked list.
+ */
+static int
+switch_worker_zcp(__attribute__((unused)) void *arg)
+{
+ struct virtio_net *dev = NULL;
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct virtio_net_data_ll *dev_ll;
+ struct mbuf_table *tx_q;
+ volatile struct lcore_ll_info *lcore_ll;
+ const uint64_t drain_tsc
+ = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S
+ * BURST_TX_DRAIN_US;
+ uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
+ unsigned ret;
+ const uint16_t lcore_id = rte_lcore_id();
+ uint16_t count_in_ring, rx_count = 0;
+
+ RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
+
+ lcore_ll = lcore_info[lcore_id].lcore_ll;
+ prev_tsc = 0;
+
+ while (1) {
+ cur_tsc = rte_rdtsc();
+
+ /* TX burst queue drain */
+ diff_tsc = cur_tsc - prev_tsc;
+ if (unlikely(diff_tsc > drain_tsc)) {
+ /*
+ * Get mbuf from vpool.pool and detach mbuf and
+ * put back into vpool.ring.
+ */
+ dev_ll = lcore_ll->ll_root_used;
+ while ((dev_ll != NULL) && (dev_ll->dev != NULL)) {
+ /* Get virtio device ID */
+ dev = dev_ll->dev;
+
+ if (likely(!dev->remove)) {
+ tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
+ if (tx_q->len) {
+ LOG_DEBUG(VHOST_DATA,
+ "TX queue drained after timeout"
+ " with burst size %u\n",
+ tx_q->len);
+
+ /*
+ * Tx any packets in the queue
+ */
+ ret = rte_eth_tx_burst(
+ ports[0],
+ (uint16_t)tx_q->txq_id,
+ (struct rte_mbuf **)
+ tx_q->m_table,
+ (uint16_t)tx_q->len);
+ if (unlikely(ret < tx_q->len)) {
+ do {
+ rte_pktmbuf_free(
+ tx_q->m_table[ret]);
+ } while (++ret < tx_q->len);
+ }
+ tx_q->len = 0;
+
+ txmbuf_clean_zcp(dev,
+ &vpool_array[MAX_QUEUES+dev->vmdq_rx_q]);
+ }
+ }
+ dev_ll = dev_ll->next;
+ }
+ prev_tsc = cur_tsc;
+ }
+
+ rte_prefetch0(lcore_ll->ll_root_used);
+
+ /*
+ * Inform the configuration core that we have exited the linked
+ * list and that no devices are in use if requested.
+ */
+ if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
+ lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
+
+ /* Process devices */
+ dev_ll = lcore_ll->ll_root_used;
+
+ while ((dev_ll != NULL) && (dev_ll->dev != NULL)) {
+ dev = dev_ll->dev;
+ if (unlikely(dev->remove)) {
+ dev_ll = dev_ll->next;
+ unlink_vmdq(dev);
+ dev->ready = DEVICE_SAFE_REMOVE;
+ continue;
+ }
+
+ if (likely(dev->ready == DEVICE_RX)) {
+ uint32_t index = dev->vmdq_rx_q;
+ uint16_t i;
+ count_in_ring
+ = rte_ring_count(vpool_array[index].ring);
+ uint16_t free_entries
+ = (uint16_t)get_available_ring_num_zcp(dev);
+
+ /*
+ * Attach all mbufs in vpool.ring and put back
+ * into vpool.pool.
+ */
+ for (i = 0;
+ i < RTE_MIN(free_entries,
+ RTE_MIN(count_in_ring, MAX_PKT_BURST));
+ i++)
+ attach_rxmbuf_zcp(dev);
+
+ /* Handle guest RX */
+ rx_count = rte_eth_rx_burst(ports[0],
+ (uint16_t)dev->vmdq_rx_q, pkts_burst,
+ MAX_PKT_BURST);
+
+ if (rx_count) {
+ ret_count = virtio_dev_rx_zcp(dev,
+ pkts_burst, rx_count);
+ if (enable_stats) {
+ dev_statistics[dev->device_fh].rx_total
+ += rx_count;
+ dev_statistics[dev->device_fh].rx
+ += ret_count;
+ }
+ while (likely(rx_count)) {
+ rx_count--;
+ pktmbuf_detach_zcp(
+ pkts_burst[rx_count]);
+ rte_ring_sp_enqueue(
+ vpool_array[index].ring,
+ (void *)pkts_burst[rx_count]);
+ }
+ }
+ }
+
+ if (likely(!dev->remove))
+ /* Handle guest TX */
+ virtio_dev_tx_zcp(dev);
+
+ /* Move to the next device in the list */
+ dev_ll = dev_ll->next;
+ }
+ }
+
+ return 0;
+}
+
+
+/*
+ * Add an entry to a used linked list. A free entry must first be found
+ * in the free linked list using get_data_ll_free_entry();
+ */
+static void
+add_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
+ struct virtio_net_data_ll *ll_dev)
+{
+ struct virtio_net_data_ll *ll = *ll_root_addr;
+
+ /* Set next as NULL and use a compiler barrier to avoid reordering. */
+ ll_dev->next = NULL;
+ rte_compiler_barrier();
+
+ /* If ll == NULL then this is the first device. */
+ if (ll) {
+ /* Increment to the tail of the linked list. */
+ while ((ll->next != NULL) )
+ ll = ll->next;
+
+ ll->next = ll_dev;
+ } else {
+ *ll_root_addr = ll_dev;
+ }
+}
+
+/*
+ * Remove an entry from a used linked list. The entry must then be added to
+ * the free linked list using put_data_ll_free_entry().
+ */
+static void
+rm_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
+ struct virtio_net_data_ll *ll_dev,
+ struct virtio_net_data_ll *ll_dev_last)
+{
+ struct virtio_net_data_ll *ll = *ll_root_addr;
+
+ if (unlikely((ll == NULL) || (ll_dev == NULL)))
+ return;
+
+ if (ll_dev == ll)
+ *ll_root_addr = ll_dev->next;
+ else
+ if (likely(ll_dev_last != NULL))
+ ll_dev_last->next = ll_dev->next;
+ else
+ RTE_LOG(ERR, VHOST_CONFIG, "Remove entry form ll failed.\n");
+}
+
+/*
+ * Find and return an entry from the free linked list.
+ */
+static struct virtio_net_data_ll *
+get_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr)
+{
+ struct virtio_net_data_ll *ll_free = *ll_root_addr;
+ struct virtio_net_data_ll *ll_dev;
+
+ if (ll_free == NULL)
+ return NULL;
+
+ ll_dev = ll_free;
+ *ll_root_addr = ll_free->next;
+
+ return ll_dev;
+}
+
+/*
+ * Place an entry back on to the free linked list.
+ */
+static void
+put_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr,
+ struct virtio_net_data_ll *ll_dev)
+{
+ struct virtio_net_data_ll *ll_free = *ll_root_addr;
+
+ if (ll_dev == NULL)
+ return;
+
+ ll_dev->next = ll_free;
+ *ll_root_addr = ll_dev;
+}
+
+/*
+ * Creates a linked list of a given size.
+ */
+static struct virtio_net_data_ll *
+alloc_data_ll(uint32_t size)
+{
+ struct virtio_net_data_ll *ll_new;
+ uint32_t i;
+
+ /* Malloc and then chain the linked list. */
+ ll_new = malloc(size * sizeof(struct virtio_net_data_ll));
+ if (ll_new == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for ll_new.\n");
+ return NULL;
+ }
+
+ for (i = 0; i < size - 1; i++) {
+ ll_new[i].dev = NULL;
+ ll_new[i].next = &ll_new[i+1];
+ }
+ ll_new[i].next = NULL;
+
+ return (ll_new);
+}
+
+/*
+ * Create the main linked list along with each individual cores linked list. A used and a free list
+ * are created to manage entries.
+ */
+static int
+init_data_ll (void)
+{
+ int lcore;
+
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ lcore_info[lcore].lcore_ll = malloc(sizeof(struct lcore_ll_info));
+ if (lcore_info[lcore].lcore_ll == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for lcore_ll.\n");
+ return -1;
+ }
+
+ lcore_info[lcore].lcore_ll->device_num = 0;
+ lcore_info[lcore].lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
+ lcore_info[lcore].lcore_ll->ll_root_used = NULL;
+ if (num_devices % num_switching_cores)
+ lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll((num_devices / num_switching_cores) + 1);
+ else
+ lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll(num_devices / num_switching_cores);
+ }
+
+ /* Allocate devices up to a maximum of MAX_DEVICES. */
+ ll_root_free = alloc_data_ll(MIN((num_devices), MAX_DEVICES));
+
+ return 0;
+}
+
+/*
+ * Set virtqueue flags so that we do not receive interrupts.
+ */
+static void
+set_irq_status (struct virtio_net *dev)
+{
+ dev->virtqueue[VIRTIO_RXQ]->used->flags = VRING_USED_F_NO_NOTIFY;
+ dev->virtqueue[VIRTIO_TXQ]->used->flags = VRING_USED_F_NO_NOTIFY;
+}
+
+/*
+ * Remove a device from the specific data core linked list and from the main linked list. Synchonization
+ * occurs through the use of the lcore dev_removal_flag. Device is made volatile here to avoid re-ordering
+ * of dev->remove=1 which can cause an infinite loop in the rte_pause loop.
+ */
+static void
+destroy_device (volatile struct virtio_net *dev)
+{
+ struct virtio_net_data_ll *ll_lcore_dev_cur;
+ struct virtio_net_data_ll *ll_main_dev_cur;
+ struct virtio_net_data_ll *ll_lcore_dev_last = NULL;
+ struct virtio_net_data_ll *ll_main_dev_last = NULL;
+ int lcore;
+
+ dev->flags &= ~VIRTIO_DEV_RUNNING;
+
+ /*set the remove flag. */
+ dev->remove = 1;
+
+ while(dev->ready != DEVICE_SAFE_REMOVE) {
+ rte_pause();
+ }
+
+ /* Search for entry to be removed from lcore ll */
+ ll_lcore_dev_cur = lcore_info[dev->coreid].lcore_ll->ll_root_used;
+ while (ll_lcore_dev_cur != NULL) {
+ if (ll_lcore_dev_cur->dev == dev) {
+ break;
+ } else {
+ ll_lcore_dev_last = ll_lcore_dev_cur;
+ ll_lcore_dev_cur = ll_lcore_dev_cur->next;
+ }
+ }
+
+ if (ll_lcore_dev_cur == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to find the dev to be destroy.\n",
+ dev->device_fh);
+ return;
+ }
+
+ /* Search for entry to be removed from main ll */
+ ll_main_dev_cur = ll_root_used;
+ ll_main_dev_last = NULL;
+ while (ll_main_dev_cur != NULL) {
+ if (ll_main_dev_cur->dev == dev) {
+ break;
+ } else {
+ ll_main_dev_last = ll_main_dev_cur;
+ ll_main_dev_cur = ll_main_dev_cur->next;
+ }
+ }
+
+ /* Remove entries from the lcore and main ll. */
+ rm_data_ll_entry(&lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->ll_root_used, ll_lcore_dev_cur, ll_lcore_dev_last);
+ rm_data_ll_entry(&ll_root_used, ll_main_dev_cur, ll_main_dev_last);
+
+ /* Set the dev_removal_flag on each lcore. */
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ lcore_info[lcore].lcore_ll->dev_removal_flag = REQUEST_DEV_REMOVAL;
+ }
+
+ /*
+ * Once each core has set the dev_removal_flag to ACK_DEV_REMOVAL we can be sure that
+ * they can no longer access the device removed from the linked lists and that the devices
+ * are no longer in use.
+ */
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ while (lcore_info[lcore].lcore_ll->dev_removal_flag != ACK_DEV_REMOVAL) {
+ rte_pause();
+ }
+ }
+
+ /* Add the entries back to the lcore and main free ll.*/
+ put_data_ll_free_entry(&lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->ll_root_free, ll_lcore_dev_cur);
+ put_data_ll_free_entry(&ll_root_free, ll_main_dev_cur);
+
+ /* Decrement number of device on the lcore. */
+ lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->device_num--;
+
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been removed from data core\n", dev->device_fh);
+
+ if (zero_copy) {
+ struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
+
+ /* Stop the RX queue. */
+ if (rte_eth_dev_rx_queue_stop(ports[0], dev->vmdq_rx_q) != 0) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In destroy_device: Failed to stop "
+ "rx queue:%d\n",
+ dev->device_fh,
+ dev->vmdq_rx_q);
+ }
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") in destroy_device: Start put mbuf in "
+ "mempool back to ring for RX queue: %d\n",
+ dev->device_fh, dev->vmdq_rx_q);
+
+ mbuf_destroy_zcp(vpool);
+
+ /* Stop the TX queue. */
+ if (rte_eth_dev_tx_queue_stop(ports[0], dev->vmdq_rx_q) != 0) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In destroy_device: Failed to "
+ "stop tx queue:%d\n",
+ dev->device_fh, dev->vmdq_rx_q);
+ }
+
+ vpool = &vpool_array[dev->vmdq_rx_q + MAX_QUEUES];
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") destroy_device: Start put mbuf in mempool "
+ "back to ring for TX queue: %d, dev:(%"PRIu64")\n",
+ dev->device_fh, (dev->vmdq_rx_q + MAX_QUEUES),
+ dev->device_fh);
+
+ mbuf_destroy_zcp(vpool);
+ }
+
+}
+
+/*
+ * A new device is added to a data core. First the device is added to the main linked list
+ * and the allocated to a specific data core.
+ */
+static int
+new_device (struct virtio_net *dev)
+{
+ struct virtio_net_data_ll *ll_dev;
+ int lcore, core_add = 0;
+ uint32_t device_num_min = num_devices;
+
+ /* Add device to main ll */
+ ll_dev = get_data_ll_free_entry(&ll_root_free);
+ if (ll_dev == NULL) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") No free entry found in linked list. Device limit "
+ "of %d devices per core has been reached\n",
+ dev->device_fh, num_devices);
+ return -1;
+ }
+ ll_dev->dev = dev;
+ add_data_ll_entry(&ll_root_used, ll_dev);
+ ll_dev->dev->vmdq_rx_q
+ = ll_dev->dev->device_fh * (num_queues / num_devices);
+
+ if (zero_copy) {
+ uint32_t index = ll_dev->dev->vmdq_rx_q;
+ uint32_t count_in_ring, i;
+ struct mbuf_table *tx_q;
+
+ count_in_ring = rte_ring_count(vpool_array[index].ring);
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") in new_device: mbuf count in mempool "
+ "before attach is: %d\n",
+ dev->device_fh,
+ rte_mempool_count(vpool_array[index].pool));
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") in new_device: mbuf count in ring "
+ "before attach is : %d\n",
+ dev->device_fh, count_in_ring);
+
+ /*
+ * Attach all mbufs in vpool.ring and put back intovpool.pool.
+ */
+ for (i = 0; i < count_in_ring; i++)
+ attach_rxmbuf_zcp(dev);
+
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in "
+ "mempool after attach is: %d\n",
+ dev->device_fh,
+ rte_mempool_count(vpool_array[index].pool));
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in "
+ "ring after attach is : %d\n",
+ dev->device_fh,
+ rte_ring_count(vpool_array[index].ring));
+
+ tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
+ tx_q->txq_id = dev->vmdq_rx_q;
+
+ if (rte_eth_dev_tx_queue_start(ports[0], dev->vmdq_rx_q) != 0) {
+ struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In new_device: Failed to start "
+ "tx queue:%d\n",
+ dev->device_fh, dev->vmdq_rx_q);
+
+ mbuf_destroy_zcp(vpool);
+ return -1;
+ }
+
+ if (rte_eth_dev_rx_queue_start(ports[0], dev->vmdq_rx_q) != 0) {
+ struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In new_device: Failed to start "
+ "rx queue:%d\n",
+ dev->device_fh, dev->vmdq_rx_q);
+
+ /* Stop the TX queue. */
+ if (rte_eth_dev_tx_queue_stop(ports[0],
+ dev->vmdq_rx_q) != 0) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In new_device: Failed to "
+ "stop tx queue:%d\n",
+ dev->device_fh, dev->vmdq_rx_q);
+ }
+
+ mbuf_destroy_zcp(vpool);
+ return -1;
+ }
+
+ }
+
+ /*reset ready flag*/
+ dev->ready = DEVICE_MAC_LEARNING;
+ dev->remove = 0;
+
+ /* Find a suitable lcore to add the device. */
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ if (lcore_info[lcore].lcore_ll->device_num < device_num_min) {
+ device_num_min = lcore_info[lcore].lcore_ll->device_num;
+ core_add = lcore;
+ }
+ }
+ /* Add device to lcore ll */
+ ll_dev->dev->coreid = core_add;
+ ll_dev = get_data_ll_free_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_free);
+ if (ll_dev == NULL) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Failed to add device to data core\n", dev->device_fh);
+ dev->ready = DEVICE_SAFE_REMOVE;
+ destroy_device(dev);
+ return -1;
+ }
+ ll_dev->dev = dev;
+ add_data_ll_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_used, ll_dev);
+
+ /* Initialize device stats */
+ memset(&dev_statistics[dev->device_fh], 0, sizeof(struct device_statistics));
+
+ /* Disable notifications. */
+ set_irq_status(dev);
+ lcore_info[ll_dev->dev->coreid].lcore_ll->device_num++;
+ dev->flags |= VIRTIO_DEV_RUNNING;
+
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d\n", dev->device_fh, dev->coreid);
+
+ return 0;
+}
+
+/*
+ * These callback allow devices to be added to the data core when configuration
+ * has been fully complete.
+ */
+static const struct virtio_net_device_ops virtio_net_device_ops =
+{
+ .new_device = new_device,
+ .destroy_device = destroy_device,
+};
+
+/*
+ * This is a thread will wake up after a period to print stats if the user has
+ * enabled them.
+ */
+static void
+print_stats(void)
+{
+ struct virtio_net_data_ll *dev_ll;
+ uint64_t tx_dropped, rx_dropped;
+ uint64_t tx, tx_total, rx, rx_total;
+ uint32_t device_fh;
+ const char clr[] = { 27, '[', '2', 'J', '\0' };
+ const char top_left[] = { 27, '[', '1', ';', '1', 'H','\0' };
+
+ while(1) {
+ sleep(enable_stats);
+
+ /* Clear screen and move to top left */
+ printf("%s%s", clr, top_left);
+
+ printf("\nDevice statistics ====================================");
+
+ dev_ll = ll_root_used;
+ while (dev_ll != NULL) {
+ device_fh = (uint32_t)dev_ll->dev->device_fh;
+ tx_total = dev_statistics[device_fh].tx_total;
+ tx = dev_statistics[device_fh].tx;
+ tx_dropped = tx_total - tx;
+ if (zero_copy == 0) {
+ rx_total = rte_atomic64_read(
+ &dev_statistics[device_fh].rx_total_atomic);
+ rx = rte_atomic64_read(
+ &dev_statistics[device_fh].rx_atomic);
+ } else {
+ rx_total = dev_statistics[device_fh].rx_total;
+ rx = dev_statistics[device_fh].rx;
+ }
+ rx_dropped = rx_total - rx;
+
+ printf("\nStatistics for device %"PRIu32" ------------------------------"
+ "\nTX total: %"PRIu64""
+ "\nTX dropped: %"PRIu64""
+ "\nTX successful: %"PRIu64""
+ "\nRX total: %"PRIu64""
+ "\nRX dropped: %"PRIu64""
+ "\nRX successful: %"PRIu64"",
+ device_fh,
+ tx_total,
+ tx_dropped,
+ tx,
+ rx_total,
+ rx_dropped,
+ rx);
+
+ dev_ll = dev_ll->next;
+ }
+ printf("\n======================================================\n");
+ }
+}
+
+static void
+setup_mempool_tbl(int socket, uint32_t index, char *pool_name,
+ char *ring_name, uint32_t nb_mbuf)
+{
+ uint16_t roomsize = VIRTIO_DESCRIPTOR_LEN_ZCP + RTE_PKTMBUF_HEADROOM;
+ vpool_array[index].pool
+ = rte_mempool_create(pool_name, nb_mbuf, MBUF_SIZE_ZCP,
+ MBUF_CACHE_SIZE_ZCP, sizeof(struct rte_pktmbuf_pool_private),
+ rte_pktmbuf_pool_init, (void *)(uintptr_t)roomsize,
+ rte_pktmbuf_init, NULL, socket, 0);
+ if (vpool_array[index].pool != NULL) {
+ vpool_array[index].ring
+ = rte_ring_create(ring_name,
+ rte_align32pow2(nb_mbuf + 1),
+ socket, RING_F_SP_ENQ | RING_F_SC_DEQ);
+ if (likely(vpool_array[index].ring != NULL)) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "in setup_mempool_tbl: mbuf count in "
+ "mempool is: %d\n",
+ rte_mempool_count(vpool_array[index].pool));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in setup_mempool_tbl: mbuf count in "
+ "ring is: %d\n",
+ rte_ring_count(vpool_array[index].ring));
+ } else {
+ rte_exit(EXIT_FAILURE, "ring_create(%s) failed",
+ ring_name);
+ }
+
+ /* Need consider head room. */
+ vpool_array[index].buf_size = roomsize - RTE_PKTMBUF_HEADROOM;
+ } else {
+ rte_exit(EXIT_FAILURE, "mempool_create(%s) failed", pool_name);
+ }
+}
+
+
+/*
+ * Main function, does initialisation and calls the per-lcore functions. The CUSE
+ * device is also registered here to handle the IOCTLs.
+ */
+int
+MAIN(int argc, char *argv[])
+{
+ struct rte_mempool *mbuf_pool = NULL;
+ unsigned lcore_id, core_id = 0;
+ unsigned nb_ports, valid_num_ports;
+ int ret;
+ uint8_t portid, queue_id = 0;
+ static pthread_t tid;
+
+ /* init EAL */
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+ argc -= ret;
+ argv += ret;
+
+ /* parse app arguments */
+ ret = us_vhost_parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid argument\n");
+
+ if (rte_eal_pci_probe() != 0)
+ rte_exit(EXIT_FAILURE, "Error with NIC driver initialization\n");
+
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id ++)
+ if (rte_lcore_is_enabled(lcore_id))
+ lcore_ids[core_id ++] = lcore_id;
+
+ if (rte_lcore_count() > RTE_MAX_LCORE)
+ rte_exit(EXIT_FAILURE,"Not enough cores\n");
+
+ /*set the number of swithcing cores available*/
+ num_switching_cores = rte_lcore_count()-1;
+
+ /* Get the number of physical ports. */
+ nb_ports = rte_eth_dev_count();
+ if (nb_ports > RTE_MAX_ETHPORTS)
+ nb_ports = RTE_MAX_ETHPORTS;
+
+ /*
+ * Update the global var NUM_PORTS and global array PORTS
+ * and get value of var VALID_NUM_PORTS according to system ports number
+ */
+ valid_num_ports = check_ports_num(nb_ports);
+
+ if ((valid_num_ports == 0) || (valid_num_ports > MAX_SUP_PORTS)) {
+ RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
+ "but only %u port can be enabled\n",num_ports, MAX_SUP_PORTS);
+ return -1;
+ }
+
+ if (zero_copy == 0) {
+ /* Create the mbuf pool. */
+ mbuf_pool = rte_mempool_create(
+ "MBUF_POOL",
+ NUM_MBUFS_PER_PORT
+ * valid_num_ports,
+ MBUF_SIZE, MBUF_CACHE_SIZE,
+ sizeof(struct rte_pktmbuf_pool_private),
+ rte_pktmbuf_pool_init, NULL,
+ rte_pktmbuf_init, NULL,
+ rte_socket_id(), 0);
+ if (mbuf_pool == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+ for (queue_id = 0; queue_id < MAX_QUEUES + 1; queue_id++)
+ vpool_array[queue_id].pool = mbuf_pool;
+
+ if (vm2vm_mode == VM2VM_HARDWARE) {
+ /* Enable VT loop back to let L2 switch to do it. */
+ vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1;
+ LOG_DEBUG(VHOST_CONFIG,
+ "Enable loop back for L2 switch in vmdq.\n");
+ }
+ } else {
+ uint32_t nb_mbuf;
+ char pool_name[RTE_MEMPOOL_NAMESIZE];
+ char ring_name[RTE_MEMPOOL_NAMESIZE];
+
+ rx_conf_default.start_rx_per_q = (uint8_t)zero_copy;
+ rx_conf_default.rx_drop_en = 0;
+ tx_conf_default.start_tx_per_q = (uint8_t)zero_copy;
+ nb_mbuf = num_rx_descriptor
+ + num_switching_cores * MBUF_CACHE_SIZE_ZCP
+ + num_switching_cores * MAX_PKT_BURST;
+
+ for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) {
+ snprintf(pool_name, sizeof(pool_name),
+ "rxmbuf_pool_%u", queue_id);
+ snprintf(ring_name, sizeof(ring_name),
+ "rxmbuf_ring_%u", queue_id);
+ setup_mempool_tbl(rte_socket_id(), queue_id,
+ pool_name, ring_name, nb_mbuf);
+ }
+
+ nb_mbuf = num_tx_descriptor
+ + num_switching_cores * MBUF_CACHE_SIZE_ZCP
+ + num_switching_cores * MAX_PKT_BURST;
+
+ for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) {
+ snprintf(pool_name, sizeof(pool_name),
+ "txmbuf_pool_%u", queue_id);
+ snprintf(ring_name, sizeof(ring_name),
+ "txmbuf_ring_%u", queue_id);
+ setup_mempool_tbl(rte_socket_id(),
+ (queue_id + MAX_QUEUES),
+ pool_name, ring_name, nb_mbuf);
+ }
+
+ if (vm2vm_mode == VM2VM_HARDWARE) {
+ /* Enable VT loop back to let L2 switch to do it. */
+ vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1;
+ LOG_DEBUG(VHOST_CONFIG,
+ "Enable loop back for L2 switch in vmdq.\n");
+ }
+ }
+ /* Set log level. */
+ rte_set_log_level(LOG_LEVEL);
+
+ /* initialize all ports */
+ for (portid = 0; portid < nb_ports; portid++) {
+ /* skip ports that are not enabled */
+ if ((enabled_port_mask & (1 << portid)) == 0) {
+ RTE_LOG(INFO, VHOST_PORT,
+ "Skipping disabled port %d\n", portid);
+ continue;
+ }
+ if (port_init(portid) != 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot initialize network ports\n");
+ }
+
+ /* Initialise all linked lists. */
+ if (init_data_ll() == -1)
+ rte_exit(EXIT_FAILURE, "Failed to initialize linked list\n");
+
+ /* Initialize device stats */
+ memset(&dev_statistics, 0, sizeof(dev_statistics));
+
+ /* Enable stats if the user option is set. */
+ if (enable_stats)
+ pthread_create(&tid, NULL, (void*)print_stats, NULL );
+
+ /* Launch all data cores. */
+ if (zero_copy == 0) {
+ RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+ rte_eal_remote_launch(switch_worker,
+ mbuf_pool, lcore_id);
+ }
+ } else {
+ uint32_t count_in_mempool, index, i;
+ for (index = 0; index < 2*MAX_QUEUES; index++) {
+ /* For all RX and TX queues. */
+ count_in_mempool
+ = rte_mempool_count(vpool_array[index].pool);
+
+ /*
+ * Transfer all un-attached mbufs from vpool.pool
+ * to vpoo.ring.
+ */
+ for (i = 0; i < count_in_mempool; i++) {
+ struct rte_mbuf *mbuf
+ = __rte_mbuf_raw_alloc(
+ vpool_array[index].pool);
+ rte_ring_sp_enqueue(vpool_array[index].ring,
+ (void *)mbuf);
+ }
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "in MAIN: mbuf count in mempool at initial "
+ "is: %d\n", count_in_mempool);
+ LOG_DEBUG(VHOST_CONFIG,
+ "in MAIN: mbuf count in ring at initial is :"
+ " %d\n",
+ rte_ring_count(vpool_array[index].ring));
+ }
+
+ RTE_LCORE_FOREACH_SLAVE(lcore_id)
+ rte_eal_remote_launch(switch_worker_zcp, NULL,
+ lcore_id);
+ }
+
+ /* Register CUSE device to handle IOCTLs. */
+ ret = register_cuse_device((char*)&dev_basename, dev_index, get_virtio_net_callbacks());
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,"CUSE device setup failure.\n");
+
+ init_virtio_net(&virtio_net_device_ops);
+
+ /* Start CUSE session. */
+ start_cuse_session_loop();
+ return 0;
+
+}
+
diff --git a/lib/librte_vhost/main.h b/lib/librte_vhost/main.h
new file mode 100644
index 0000000..c15d938
--- /dev/null
+++ b/lib/librte_vhost/main.h
@@ -0,0 +1,86 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+//#define DEBUG
+
+#ifdef DEBUG
+#define LOG_LEVEL RTE_LOG_DEBUG
+#define LOG_DEBUG(log_type, fmt, args...) do { \
+ RTE_LOG(DEBUG, log_type, fmt, ##args); \
+} while (0)
+#else
+#define LOG_LEVEL RTE_LOG_INFO
+#define LOG_DEBUG(log_type, fmt, args...) do{} while(0)
+#endif
+
+/* Macros for printing using RTE_LOG */
+#define RTE_LOGTYPE_VHOST_CONFIG RTE_LOGTYPE_USER1
+#define RTE_LOGTYPE_VHOST_DATA RTE_LOGTYPE_USER2
+#define RTE_LOGTYPE_VHOST_PORT RTE_LOGTYPE_USER3
+
+/*
+ * Device linked list structure for data path.
+ */
+struct virtio_net_data_ll
+{
+ struct virtio_net *dev; /* Pointer to device created by configuration core. */
+ struct virtio_net_data_ll *next; /* Pointer to next device in linked list. */
+};
+
+/*
+ * Structure containing data core specific information.
+ */
+struct lcore_ll_info
+{
+ struct virtio_net_data_ll *ll_root_free; /* Pointer to head in free linked list. */
+ struct virtio_net_data_ll *ll_root_used; /* Pointer to head of used linked list. */
+ uint32_t device_num; /* Number of devices on lcore. */
+ volatile uint8_t dev_removal_flag; /* Flag to synchronize device removal. */
+};
+
+struct lcore_info
+{
+ struct lcore_ll_info *lcore_ll; /* Pointer to data core specific lcore_ll_info struct */
+};
+
+int MAIN(int argc, char **argv);
+#endif /* _MAIN_H_ */
diff --git a/lib/librte_vhost/vhost-net-cdev.c b/lib/librte_vhost/vhost-net-cdev.c
new file mode 100644
index 0000000..8cf806a
--- /dev/null
+++ b/lib/librte_vhost/vhost-net-cdev.c
@@ -0,0 +1,367 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <errno.h>
+#include <fuse/cuse_lowlevel.h>
+#include <linux/limits.h>
+#include <linux/vhost.h>
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <rte_ethdev.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+
+#include "main.h"
+#include "vhost-net-cdev.h"
+
+#define FUSE_OPT_DUMMY "\0\0"
+#define FUSE_OPT_FORE "-f\0\0"
+#define FUSE_OPT_NOMULTI "-s\0\0"
+
+const uint32_t default_major = 231;
+const uint32_t default_minor = 1;
+const char cuse_device_name[] = "/dev/cuse";
+const char default_cdev[] = "vhost-net";
+
+static struct fuse_session *session;
+static struct vhost_net_device_ops const *ops;
+
+/*
+ * Returns vhost_device_ctx from given fuse_req_t. The index is populated later when
+ * the device is added to the device linked list.
+ */
+static struct vhost_device_ctx
+fuse_req_to_vhost_ctx(fuse_req_t req, struct fuse_file_info *fi)
+{
+ struct vhost_device_ctx ctx;
+ struct fuse_ctx const *const req_ctx = fuse_req_ctx(req);
+
+ ctx.pid = req_ctx->pid;
+ ctx.fh = fi->fh;
+
+ return ctx;
+}
+
+/*
+ * When the device is created in QEMU it gets initialised here and added to the device linked list.
+ */
+static void
+vhost_net_open(fuse_req_t req, struct fuse_file_info *fi)
+{
+ struct vhost_device_ctx ctx = fuse_req_to_vhost_ctx(req, fi);
+ int err = 0;
+
+ err = ops->new_device(ctx);
+ if (err == -1) {
+ fuse_reply_err(req, EPERM);
+ return;
+ }
+
+ fi->fh = err;
+
+ RTE_LOG(INFO, VHOST_CONFIG, "(%"PRIu64") Device configuration started\n", fi->fh);
+ fuse_reply_open(req, fi);
+}
+
+/*
+ * When QEMU is shutdown or killed the device gets released.
+ */
+static void
+vhost_net_release(fuse_req_t req, struct fuse_file_info *fi)
+{
+ int err = 0;
+ struct vhost_device_ctx ctx = fuse_req_to_vhost_ctx(req, fi);
+
+ ops->destroy_device(ctx);
+ RTE_LOG(INFO, VHOST_CONFIG, "(%"PRIu64") Device released\n", ctx.fh);
+ fuse_reply_err(req, err);
+}
+
+/*
+ * Boilerplate code for CUSE IOCTL
+ * Implicit arguments: ctx, req, result.
+ */
+#define VHOST_IOCTL(func) do { \
+ result = (func)(ctx); \
+ fuse_reply_ioctl(req, result, NULL, 0); \
+} while(0) \
+
+/*
+ * Boilerplate IOCTL RETRY
+ * Implicit arguments: req.
+ */
+#define VHOST_IOCTL_RETRY(size_r, size_w) do { \
+ struct iovec iov_r = { arg, (size_r) }; \
+ struct iovec iov_w = { arg, (size_w) }; \
+ fuse_reply_ioctl_retry(req, &iov_r, (size_r)?1:0, &iov_w, (size_w)?1:0); \
+} while(0) \
+
+/*
+ * Boilerplate code for CUSE Read IOCTL
+ * Implicit arguments: ctx, req, result, in_bufsz, in_buf.
+ */
+#define VHOST_IOCTL_R(type, var, func) do { \
+ if (!in_bufsz) { \
+ VHOST_IOCTL_RETRY(sizeof(type), 0); \
+ } else { \
+ (var) = *(const type * ) in_buf; \
+ result = func(ctx, &(var)); \
+ fuse_reply_ioctl(req, result, NULL, 0); \
+ } \
+} while(0) \
+
+/*
+ * Boilerplate code for CUSE Write IOCTL
+ * Implicit arguments: ctx, req, result, out_bufsz.
+ */
+#define VHOST_IOCTL_W(type, var, func) do { \
+ if (!out_bufsz) { \
+ VHOST_IOCTL_RETRY(0, sizeof(type)); \
+ } else { \
+ result = (func)(ctx, &(var)); \
+ fuse_reply_ioctl(req, result, &(var), sizeof(type)); \
+ } \
+} while(0) \
+
+/*
+ * Boilerplate code for CUSE Read/Write IOCTL
+ * Implicit arguments: ctx, req, result, in_bufsz, in_buf.
+ */
+#define VHOST_IOCTL_RW(type1, var1, type2, var2, func) do { \
+ if (!in_bufsz) { \
+ VHOST_IOCTL_RETRY(sizeof(type1), sizeof(type2)); \
+ } else { \
+ (var1) = *(const type1* ) (in_buf); \
+ result = (func)(ctx, (var1), &(var2)); \
+ fuse_reply_ioctl(req, result, &(var2), sizeof(type2)); \
+ } \
+} while(0) \
+
+/*
+ * The IOCTLs are handled using CUSE/FUSE in userspace. Depending on
+ * the type of IOCTL a buffer is requested to read or to write. This
+ * request is handled by FUSE and the buffer is then given to CUSE.
+ */
+static void
+vhost_net_ioctl(fuse_req_t req, int cmd, void *arg,
+ struct fuse_file_info *fi, __rte_unused unsigned flags,
+ const void *in_buf, size_t in_bufsz, size_t out_bufsz)
+{
+ struct vhost_device_ctx ctx = fuse_req_to_vhost_ctx(req, fi);
+ struct vhost_vring_file file;
+ struct vhost_vring_state state;
+ struct vhost_vring_addr addr;
+ uint64_t features;
+ uint32_t index;
+ int result = 0;
+
+ switch(cmd)
+ {
+ case VHOST_NET_SET_BACKEND:
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_NET_SET_BACKEND\n", ctx.fh);
+ VHOST_IOCTL_R(struct vhost_vring_file, file, ops->set_backend);
+ break;
+
+ case VHOST_GET_FEATURES:
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_GET_FEATURES\n", ctx.fh);
+ VHOST_IOCTL_W(uint64_t, features, ops->get_features);
+ break;
+
+ case VHOST_SET_FEATURES:
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_FEATURES\n", ctx.fh);
+ VHOST_IOCTL_R(uint64_t, features, ops->set_features);
+ break;
+
+ case VHOST_RESET_OWNER:
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_RESET_OWNER\n", ctx.fh);
+ VHOST_IOCTL(ops->reset_owner);
+ break;
+
+ case VHOST_SET_OWNER:
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_OWNER\n", ctx.fh);
+ VHOST_IOCTL(ops->set_owner);
+ break;
+
+ case VHOST_SET_MEM_TABLE:
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_MEM_TABLE\n", ctx.fh);
+ static struct vhost_memory mem_temp;
+
+ switch(in_bufsz){
+ case 0:
+ VHOST_IOCTL_RETRY(sizeof(struct vhost_memory), 0);
+ break;
+
+ case sizeof(struct vhost_memory):
+ mem_temp = *(const struct vhost_memory *) in_buf;
+
+ if (mem_temp.nregions > 0) {
+ VHOST_IOCTL_RETRY(sizeof(struct vhost_memory) + (sizeof(struct vhost_memory_region) * mem_temp.nregions), 0);
+ } else {
+ result = -1;
+ fuse_reply_ioctl(req, result, NULL, 0);
+ }
+ break;
+
+ default:
+ result = ops->set_mem_table(ctx, in_buf, mem_temp.nregions);
+ if (result)
+ fuse_reply_err(req, EINVAL);
+ else
+ fuse_reply_ioctl(req, result, NULL, 0);
+
+ }
+
+ break;
+
+ case VHOST_SET_VRING_NUM:
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_VRING_NUM\n", ctx.fh);
+ VHOST_IOCTL_R(struct vhost_vring_state, state, ops->set_vring_num);
+ break;
+
+ case VHOST_SET_VRING_BASE:
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_VRING_BASE\n", ctx.fh);
+ VHOST_IOCTL_R(struct vhost_vring_state, state, ops->set_vring_base);
+ break;
+
+ case VHOST_GET_VRING_BASE:
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_GET_VRING_BASE\n", ctx.fh);
+ VHOST_IOCTL_RW(uint32_t, index, struct vhost_vring_state, state, ops->get_vring_base);
+ break;
+
+ case VHOST_SET_VRING_ADDR:
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_VRING_ADDR\n", ctx.fh);
+ VHOST_IOCTL_R(struct vhost_vring_addr, addr, ops->set_vring_addr);
+ break;
+
+ case VHOST_SET_VRING_KICK:
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_VRING_KICK\n", ctx.fh);
+ VHOST_IOCTL_R(struct vhost_vring_file, file, ops->set_vring_kick);
+ break;
+
+ case VHOST_SET_VRING_CALL:
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: VHOST_SET_VRING_CALL\n", ctx.fh);
+ VHOST_IOCTL_R(struct vhost_vring_file, file, ops->set_vring_call);
+ break;
+
+ default:
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") IOCTL: DOESN NOT EXIST\n", ctx.fh);
+ result = -1;
+ fuse_reply_ioctl(req, result, NULL, 0);
+ }
+
+ if (result < 0) {
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: FAIL\n", ctx.fh);
+ } else {
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: SUCCESS\n", ctx.fh);
+ }
+}
+
+/*
+ * Structure handling open, release and ioctl function pointers is populated.
+ */
+static const struct cuse_lowlevel_ops vhost_net_ops = {
+ .open = vhost_net_open,
+ .release = vhost_net_release,
+ .ioctl = vhost_net_ioctl,
+};
+
+/*
+ * cuse_info is populated and used to register the cuse device. vhost_net_device_ops are
+ * also passed when the device is registered in main.c.
+ */
+int
+register_cuse_device(const char *base_name, int index, struct vhost_net_device_ops const * const pops)
+{
+ struct cuse_info cuse_info;
+ char device_name[PATH_MAX] = "";
+ char char_device_name[PATH_MAX] = "";
+ const char *device_argv[] = { device_name };
+
+ char fuse_opt_dummy[] = FUSE_OPT_DUMMY;
+ char fuse_opt_fore[] = FUSE_OPT_FORE;
+ char fuse_opt_nomulti[] = FUSE_OPT_NOMULTI;
+ char *fuse_argv[] = {fuse_opt_dummy, fuse_opt_fore, fuse_opt_nomulti};
+
+ if (access(cuse_device_name, R_OK | W_OK) < 0) {
+ RTE_LOG(ERR, VHOST_CONFIG, "Character device %s can't be accessed, maybe not exist\n", cuse_device_name);
+ return -1;
+ }
+
+ /*
+ * The device name is created. This is passed to QEMU so that it can register
+ * the device with our application. The index allows us to have multiple instances
+ * of userspace vhost which we can then add devices to separately.
+ */
+ if (strncmp(base_name, default_cdev, PATH_MAX)!=0) {
+ snprintf(device_name, PATH_MAX, "DEVNAME=%s-%d", base_name, index);
+ snprintf(char_device_name, PATH_MAX, "/dev/%s-%d", base_name, index);
+ } else {
+ snprintf(device_name, PATH_MAX, "DEVNAME=%s", base_name);
+ snprintf(char_device_name, PATH_MAX, "/dev/%s", base_name);
+ }
+
+ /* Check if device already exists. */
+ if (access(char_device_name, F_OK) != -1) {
+ RTE_LOG(ERR, VHOST_CONFIG, "Character device %s already exists\n", char_device_name);
+ return -1;
+ }
+
+ memset(&cuse_info, 0, sizeof(cuse_info));
+ cuse_info.dev_major = default_major;
+ cuse_info.dev_minor = default_minor + index;
+ cuse_info.dev_info_argc = 1;
+ cuse_info.dev_info_argv = device_argv;
+ cuse_info.flags = CUSE_UNRESTRICTED_IOCTL;
+
+ ops = pops;
+
+ session = cuse_lowlevel_setup(3, fuse_argv,
+ &cuse_info, &vhost_net_ops, 0, NULL);
+ if (session == NULL)
+ return -1;
+
+ return 0;
+}
+
+/*
+ * The CUSE session is launched allowing the application to receive open, release and ioctl calls.
+ */
+int
+start_cuse_session_loop(void)
+{
+ fuse_session_loop(session);
+
+ return 0;
+}
diff --git a/lib/librte_vhost/vhost-net-cdev.h b/lib/librte_vhost/vhost-net-cdev.h
new file mode 100644
index 0000000..575daa9
--- /dev/null
+++ b/lib/librte_vhost/vhost-net-cdev.h
@@ -0,0 +1,83 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _VHOST_NET_CDEV_H_
+#define _VHOST_NET_CDEV_H_
+
+#include <linux/vhost.h>
+
+struct vhost_memory;
+struct vhost_vring_state;
+struct vhost_vring_addr;
+struct vhost_vring_file;
+
+/*
+ * Structure used to identify device context.
+ */
+struct vhost_device_ctx
+{
+ pid_t pid; /* PID of process calling the IOCTL. */
+ uint64_t fh; /* Populated with fi->fh to track the device index. */
+};
+
+/*
+ * Structure contains function pointers to be defined in virtio-net.c. These
+ * functions are called in CUSE context and are used to configure devices.
+ */
+struct vhost_net_device_ops {
+ int (* new_device) (struct vhost_device_ctx);
+ void (* destroy_device) (struct vhost_device_ctx);
+
+ int (* get_features) (struct vhost_device_ctx, uint64_t *);
+ int (* set_features) (struct vhost_device_ctx, uint64_t *);
+
+ int (* set_mem_table) (struct vhost_device_ctx, const void *, uint32_t);
+
+ int (* set_vring_num) (struct vhost_device_ctx, struct vhost_vring_state *);
+ int (* set_vring_addr) (struct vhost_device_ctx, struct vhost_vring_addr *);
+ int (* set_vring_base) (struct vhost_device_ctx, struct vhost_vring_state *);
+ int (* get_vring_base) (struct vhost_device_ctx, uint32_t, struct vhost_vring_state *);
+
+ int (* set_vring_kick) (struct vhost_device_ctx, struct vhost_vring_file *);
+ int (* set_vring_call) (struct vhost_device_ctx, struct vhost_vring_file *);
+
+ int (* set_backend) (struct vhost_device_ctx, struct vhost_vring_file *);
+
+ int (* set_owner) (struct vhost_device_ctx);
+ int (* reset_owner) (struct vhost_device_ctx);
+};
+
+int register_cuse_device(const char *base_name, int index, struct vhost_net_device_ops const * const);
+int start_cuse_session_loop(void);
+
+#endif /* _VHOST_NET_CDEV_H_ */
diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
new file mode 100644
index 0000000..5e659c7
--- /dev/null
+++ b/lib/librte_vhost/virtio-net.c
@@ -0,0 +1,1165 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dirent.h>
+#include <fuse/cuse_lowlevel.h>
+#include <linux/vhost.h>
+#include <linux/virtio_net.h>
+#include <stddef.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <sys/eventfd.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <unistd.h>
+
+#include <rte_ethdev.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+#include <rte_memory.h>
+
+#include "main.h"
+#include "virtio-net.h"
+#include "vhost-net-cdev.h"
+#include "eventfd_link/eventfd_link.h"
+
+const char eventfd_cdev[] = "/dev/eventfd-link";
+
+extern uint32_t num_devices;
+static uint32_t num_cur_devices = 0;
+
+/* device ops to add/remove device to data core. */
+static struct virtio_net_device_ops const * notify_ops;
+/* Root address of the linked list in the configuration core. */
+static struct virtio_net_config_ll *ll_root = NULL;
+
+/* Features supported by this application. RX merge buffers are disabled by default. */
+uint64_t VHOST_FEATURES = (0ULL << VIRTIO_NET_F_MRG_RXBUF);
+
+/* Line size for reading maps file. */
+const uint32_t BUFSIZE = PATH_MAX;
+
+/* Size of prot char array in procmap. */
+#define PROT_SZ 5
+
+/* Number of elements in procmap struct. */
+#define PROCMAP_SZ 8
+
+/* Structure containing information gathered from maps file. */
+struct procmap
+{
+ uint64_t va_start; /* Start virtual address in file. */
+ uint64_t len; /* Size of file. */
+ uint64_t pgoff; /* Not used. */
+ uint32_t maj; /* Not used. */
+ uint32_t min; /* Not used. */
+ uint32_t ino; /* Not used. */
+ char prot[PROT_SZ]; /* Not used. */
+ char fname[PATH_MAX]; /* File name. */
+};
+
+/*
+ * Converts QEMU virtual address to Vhost virtual address. This function is used
+ * to convert the ring addresses to our address space.
+ */
+static uint64_t
+qva_to_vva(struct virtio_net *dev, uint64_t qemu_va)
+{
+ struct virtio_memory_regions *region;
+ uint64_t vhost_va = 0;
+ uint32_t regionidx = 0;
+
+ /* Find the region where the address lives. */
+ for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
+ region = &dev->mem->regions[regionidx];
+ if ((qemu_va >= region->userspace_address) &&
+ (qemu_va <= region->userspace_address +
+ region->memory_size)) {
+ vhost_va = dev->mem->mapped_address + qemu_va - dev->mem->base_address;
+ break;
+ }
+ }
+ return vhost_va;
+}
+
+/*
+ * Locate the file containing QEMU's memory space and map it to our address space.
+ */
+static int
+host_memory_map (struct virtio_net *dev, struct virtio_memory *mem, pid_t pid, uint64_t addr)
+{
+ struct dirent *dptr = NULL;
+ struct procmap procmap;
+ DIR *dp = NULL;
+ int fd;
+ int i;
+ char memfile[PATH_MAX];
+ char mapfile[PATH_MAX];
+ char procdir[PATH_MAX];
+ char resolved_path[PATH_MAX];
+ FILE *fmap;
+ void *map;
+ uint8_t found = 0;
+ char line[BUFSIZE];
+ char dlm[] = "- : ";
+ char *str, *sp, *in[PROCMAP_SZ];
+ char *end = NULL;
+
+ /* Path where mem files are located. */
+ snprintf (procdir, PATH_MAX, "/proc/%u/fd/", pid);
+ /* Maps file used to locate mem file. */
+ snprintf (mapfile, PATH_MAX, "/proc/%u/maps", pid);
+
+ fmap = fopen(mapfile, "r");
+ if (fmap == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to open maps file for pid %d\n", dev->device_fh, pid);
+ return -1;
+ }
+
+ /* Read through maps file until we find out base_address. */
+ while (fgets(line, BUFSIZE, fmap) != 0) {
+ str = line;
+ errno = 0;
+ /* Split line in to fields. */
+ for (i = 0; i < PROCMAP_SZ; i++) {
+ if (((in[i] = strtok_r(str, &dlm[i], &sp)) == NULL) || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+ str = NULL;
+ }
+
+ /* Convert/Copy each field as needed. */
+ procmap.va_start = strtoull(in[0], &end, 16);
+ if ((in[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.len = strtoull(in[1], &end, 16);
+ if ((in[1] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.pgoff = strtoull(in[3], &end, 16);
+ if ((in[3] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.maj = strtoul(in[4], &end, 16);
+ if ((in[4] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.min = strtoul(in[5], &end, 16);
+ if ((in[5] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.ino = strtoul(in[6], &end, 16);
+ if ((in[6] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ memcpy(&procmap.prot, in[2], PROT_SZ);
+ memcpy(&procmap.fname, in[7], PATH_MAX);
+
+ if (procmap.va_start == addr) {
+ procmap.len = procmap.len - procmap.va_start;
+ found = 1;
+ break;
+ }
+ }
+ fclose(fmap);
+
+ if (!found) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find memory file in pid %d maps file\n", dev->device_fh, pid);
+ return -1;
+ }
+
+ /* Find the guest memory file among the process fds. */
+ dp = opendir(procdir);
+ if (dp == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Cannot open pid %d process directory \n", dev->device_fh, pid);
+ return -1;
+
+ }
+
+ found = 0;
+
+ /* Read the fd directory contents. */
+ while (NULL != (dptr = readdir(dp))) {
+ snprintf (memfile, PATH_MAX, "/proc/%u/fd/%s", pid, dptr->d_name);
+ realpath(memfile, resolved_path);
+ if (resolved_path == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to resolve fd directory\n", dev->device_fh);
+ closedir(dp);
+ return -1;
+ }
+ if (strncmp(resolved_path, procmap.fname,
+ strnlen(procmap.fname, PATH_MAX)) == 0) {
+ found = 1;
+ break;
+ }
+ }
+
+ closedir(dp);
+
+ if (found == 0) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find memory file for pid %d\n", dev->device_fh, pid);
+ return -1;
+ }
+ /* Open the shared memory file and map the memory into this process. */
+ fd = open(memfile, O_RDWR);
+
+ if (fd == -1) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to open %s for pid %d\n", dev->device_fh, memfile, pid);
+ return -1;
+ }
+
+ map = mmap(0, (size_t)procmap.len, PROT_READ|PROT_WRITE , MAP_POPULATE|MAP_SHARED, fd, 0);
+ close (fd);
+
+ if (map == MAP_FAILED) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Error mapping the file %s for pid %d\n", dev->device_fh, memfile, pid);
+ return -1;
+ }
+
+ /* Store the memory address and size in the device data structure */
+ mem->mapped_address = (uint64_t)(uintptr_t)map;
+ mem->mapped_size = procmap.len;
+
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") Mem File: %s->%s - Size: %llu - VA: %p\n", dev->device_fh,
+ memfile, resolved_path, (long long unsigned)mem->mapped_size, map);
+
+ return 0;
+}
+
+/*
+ * Retrieves an entry from the devices configuration linked list.
+ */
+static struct virtio_net_config_ll *
+get_config_ll_entry(struct vhost_device_ctx ctx)
+{
+ struct virtio_net_config_ll *ll_dev = ll_root;
+
+ /* Loop through linked list until the device_fh is found. */
+ while (ll_dev != NULL) {
+ if (ll_dev->dev.device_fh == ctx.fh)
+ return ll_dev;
+ ll_dev = ll_dev->next;
+ }
+
+ return NULL;
+}
+
+/*
+ * Searches the configuration core linked list and retrieves the device if it exists.
+ */
+static struct virtio_net *
+get_device(struct vhost_device_ctx ctx)
+{
+ struct virtio_net_config_ll *ll_dev;
+
+ ll_dev = get_config_ll_entry(ctx);
+
+ /* If a matching entry is found in the linked list, return the device in that entry. */
+ if (ll_dev) {
+ return &ll_dev->dev;
+ }
+
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Device not found in linked list.\n", ctx.fh);
+ return NULL;
+}
+
+/*
+ * Add entry containing a device to the device configuration linked list.
+ */
+static void
+add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
+{
+ struct virtio_net_config_ll *ll_dev = ll_root;
+
+ /* If ll_dev == NULL then this is the first device so go to else */
+ if (ll_dev) {
+ /* If the 1st device_fh != 0 then we insert our device here. */
+ if (ll_dev->dev.device_fh != 0) {
+ new_ll_dev->dev.device_fh = 0;
+ new_ll_dev->next = ll_dev;
+ ll_root = new_ll_dev;
+ } else {
+ /* Increment through the ll until we find un unused device_fh. Insert the device at that entry*/
+ while ((ll_dev->next != NULL) && (ll_dev->dev.device_fh == (ll_dev->next->dev.device_fh - 1)))
+ ll_dev = ll_dev->next;
+
+ new_ll_dev->dev.device_fh = ll_dev->dev.device_fh + 1;
+ new_ll_dev->next = ll_dev->next;
+ ll_dev->next = new_ll_dev;
+ }
+ } else {
+ ll_root = new_ll_dev;
+ ll_root->dev.device_fh = 0;
+ }
+
+}
+
+/*
+ * Unmap any memory, close any file descriptors and free any memory owned by a device.
+ */
+static void
+cleanup_device(struct virtio_net *dev)
+{
+ /* Unmap QEMU memory file if mapped. */
+ if (dev->mem) {
+ munmap((void*)(uintptr_t)dev->mem->mapped_address, (size_t)dev->mem->mapped_size);
+ if (dev->mem->regions_hpa)
+ free(dev->mem->regions_hpa);
+ free(dev->mem);
+ }
+
+ /* Close any event notifiers opened by device. */
+ if (dev->virtqueue[VIRTIO_RXQ]->callfd)
+ close((int)dev->virtqueue[VIRTIO_RXQ]->callfd);
+ if (dev->virtqueue[VIRTIO_RXQ]->kickfd)
+ close((int)dev->virtqueue[VIRTIO_RXQ]->kickfd);
+ if (dev->virtqueue[VIRTIO_TXQ]->callfd)
+ close((int)dev->virtqueue[VIRTIO_TXQ]->callfd);
+ if (dev->virtqueue[VIRTIO_TXQ]->kickfd)
+ close((int)dev->virtqueue[VIRTIO_TXQ]->kickfd);
+}
+
+/*
+ * Release virtqueues and device memory.
+ */
+static void
+free_device(struct virtio_net_config_ll *ll_dev)
+{
+ /* Free any malloc'd memory */
+ free(ll_dev->dev.virtqueue[VIRTIO_RXQ]);
+ free(ll_dev->dev.virtqueue[VIRTIO_TXQ]);
+ free(ll_dev);
+}
+/*
+ * Remove an entry from the device configuration linked list.
+ */
+static struct virtio_net_config_ll *
+rm_config_ll_entry(struct virtio_net_config_ll *ll_dev, struct virtio_net_config_ll *ll_dev_last)
+{
+ /* First remove the device and then clean it up. */
+ if (ll_dev == ll_root) {
+ ll_root = ll_dev->next;
+ cleanup_device(&ll_dev->dev);
+ free_device(ll_dev);
+ return ll_root;
+ } else {
+ if (likely(ll_dev_last != NULL)) {
+ ll_dev_last->next = ll_dev->next;
+ cleanup_device(&ll_dev->dev);
+ free_device(ll_dev);
+ return ll_dev_last->next;
+ } else {
+ cleanup_device(&ll_dev->dev);
+ free_device(ll_dev);
+ RTE_LOG(ERR, VHOST_CONFIG, "Remove entry from config_ll failed\n");
+ return NULL;
+ }
+ }
+}
+
+/*
+ * Initialise all variables in device structure.
+ */
+static void
+init_device(struct virtio_net *dev)
+{
+ uint64_t vq_offset;
+
+ /* Virtqueues have already been malloced so we don't want to set them to NULL. */
+ vq_offset = offsetof(struct virtio_net, mem);
+
+ /* Set everything to 0. */
+ memset((void*)(uintptr_t)((uint64_t)(uintptr_t)dev + vq_offset), 0,
+ (sizeof(struct virtio_net) - (size_t)vq_offset));
+ memset(dev->virtqueue[VIRTIO_RXQ], 0, sizeof(struct vhost_virtqueue));
+ memset(dev->virtqueue[VIRTIO_TXQ], 0, sizeof(struct vhost_virtqueue));
+
+ /* Backends are set to -1 indicating an inactive device. */
+ dev->virtqueue[VIRTIO_RXQ]->backend = VIRTIO_DEV_STOPPED;
+ dev->virtqueue[VIRTIO_TXQ]->backend = VIRTIO_DEV_STOPPED;
+}
+
+/*
+ * Function is called from the CUSE open function. The device structure is
+ * initialised and a new entry is added to the device configuration linked
+ * list.
+ */
+static int
+new_device(struct vhost_device_ctx ctx)
+{
+ struct virtio_net_config_ll *new_ll_dev;
+ struct vhost_virtqueue *virtqueue_rx, *virtqueue_tx;
+
+ /*check the number of devices in the system*/
+ if (num_cur_devices == num_devices) {
+ RTE_LOG(ERR, VHOST_CONFIG, "() Max num devices (%u) exceeded\n", num_devices);
+ return -1;
+ }
+
+ /* Setup device and virtqueues. */
+ new_ll_dev = malloc(sizeof(struct virtio_net_config_ll));
+ if (new_ll_dev == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to allocate memory for dev.\n", ctx.fh);
+ return -1;
+ }
+
+ virtqueue_rx = malloc(sizeof(struct vhost_virtqueue));
+ if (virtqueue_rx == NULL) {
+ free(new_ll_dev);
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to allocate memory for virtqueue_rx.\n", ctx.fh);
+ return -1;
+ }
+
+ virtqueue_tx = malloc(sizeof(struct vhost_virtqueue));
+ if (virtqueue_tx == NULL) {
+ free(virtqueue_rx);
+ free(new_ll_dev);
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to allocate memory for virtqueue_tx.\n", ctx.fh);
+ return -1;
+ }
+
+ new_ll_dev->dev.virtqueue[VIRTIO_RXQ] = virtqueue_rx;
+ new_ll_dev->dev.virtqueue[VIRTIO_TXQ] = virtqueue_tx;
+
+ /* Initialise device and virtqueues. */
+ init_device(&new_ll_dev->dev);
+
+ new_ll_dev->next = NULL;
+
+ /* Add entry to device configuration linked list. */
+ add_config_ll_entry(new_ll_dev);
+
+ /*increment the number of devices in the system*/
+ num_cur_devices++;
+
+ return new_ll_dev->dev.device_fh;
+}
+
+/*
+ * Function is called from the CUSE release function. This function will cleanup
+ * the device and remove it from device configuration linked list.
+ */
+static void
+destroy_device(struct vhost_device_ctx ctx)
+{
+ struct virtio_net_config_ll *ll_dev_cur_ctx, *ll_dev_last = NULL;
+ struct virtio_net_config_ll *ll_dev_cur = ll_root;
+
+ /* Find the linked list entry for the device to be removed. */
+ ll_dev_cur_ctx = get_config_ll_entry(ctx);
+ while (ll_dev_cur != NULL) {
+ /* If the device is found or a device that doesn't exist is found then it is removed. */
+ if (ll_dev_cur == ll_dev_cur_ctx) {
+ /*
+ * If the device is running on a data core then call the function to remove it from
+ * the data core.
+ */
+ if ((ll_dev_cur->dev.flags & VIRTIO_DEV_RUNNING))
+ notify_ops->destroy_device(&(ll_dev_cur->dev));
+ ll_dev_cur = rm_config_ll_entry(ll_dev_cur, ll_dev_last);
+ } else {
+ ll_dev_last = ll_dev_cur;
+ ll_dev_cur = ll_dev_cur->next;
+ }
+ }
+
+ /*decrement the number of devices in the system*/
+ num_cur_devices--;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_SET_OWNER
+ * This function just returns success at the moment unless the device hasn't been initialised.
+ */
+static int
+set_owner(struct vhost_device_ctx ctx)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ return 0;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_RESET_OWNER
+ */
+static int
+reset_owner(struct vhost_device_ctx ctx)
+{
+ struct virtio_net_config_ll *ll_dev;
+
+ ll_dev = get_config_ll_entry(ctx);
+
+ cleanup_device(&ll_dev->dev);
+ init_device(&ll_dev->dev);
+
+ return 0;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_GET_FEATURES
+ * The features that we support are requested.
+ */
+static int
+get_features(struct vhost_device_ctx ctx, uint64_t *pu)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ /* Send our supported features. */
+ *pu = VHOST_FEATURES;
+ return 0;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_SET_FEATURES
+ * We receive the negotiated set of features supported by us and the virtio device.
+ */
+static int
+set_features(struct vhost_device_ctx ctx, uint64_t *pu)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+ if (*pu & ~VHOST_FEATURES)
+ return -1;
+
+ /* Store the negotiated feature list for the device. */
+ dev->features = *pu;
+
+ /* Set the vhost_hlen depending on if VIRTIO_NET_F_MRG_RXBUF is set. */
+ if (dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF)) {
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") Mergeable RX buffers enabled\n", dev->device_fh);
+ dev->virtqueue[VIRTIO_RXQ]->vhost_hlen = sizeof(struct virtio_net_hdr_mrg_rxbuf);
+ dev->virtqueue[VIRTIO_TXQ]->vhost_hlen = sizeof(struct virtio_net_hdr_mrg_rxbuf);
+ } else {
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") Mergeable RX buffers disabled\n", dev->device_fh);
+ dev->virtqueue[VIRTIO_RXQ]->vhost_hlen = sizeof(struct virtio_net_hdr);
+ dev->virtqueue[VIRTIO_TXQ]->vhost_hlen = sizeof(struct virtio_net_hdr);
+ }
+ return 0;
+}
+
+/*
+ * Calculate the region count of physical continous regions for one particular
+ * region of whose vhost virtual address is continous. The particular region
+ * start from vva_start, with size of 'size' in argument.
+ */
+static uint32_t check_hpa_regions(uint64_t vva_start, uint64_t size)
+{
+ uint32_t i, nregions = 0, page_size = PAGE_SIZE;
+ uint64_t cur_phys_addr = 0, next_phys_addr = 0;
+ if (vva_start % page_size) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "in check_countinous: vva start(%p) mod page_size(%d) "
+ "has remainder\n",
+ (void *)(uintptr_t)vva_start, page_size);
+ return 0;
+ }
+ if (size % page_size) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "in check_countinous: "
+ "size((%"PRIu64")) mod page_size(%d) has remainder\n",
+ size, page_size);
+ return 0;
+ }
+ for (i = 0; i < size - page_size; i = i + page_size) {
+ cur_phys_addr
+ = rte_mem_virt2phy((void *)(uintptr_t)(vva_start + i));
+ next_phys_addr = rte_mem_virt2phy(
+ (void *)(uintptr_t)(vva_start + i + page_size));
+ if ((cur_phys_addr + page_size) != next_phys_addr) {
+ ++nregions;
+ LOG_DEBUG(VHOST_CONFIG,
+ "in check_continuous: hva addr:(%p) is not "
+ "continuous with hva addr:(%p), diff:%d\n",
+ (void *)(uintptr_t)(vva_start + (uint64_t)i),
+ (void *)(uintptr_t)(vva_start + (uint64_t)i
+ + page_size), page_size);
+ LOG_DEBUG(VHOST_CONFIG,
+ "in check_continuous: hpa addr:(%p) is not "
+ "continuous with hpa addr:(%p), "
+ "diff:(%"PRIu64")\n",
+ (void *)(uintptr_t)cur_phys_addr,
+ (void *)(uintptr_t)next_phys_addr,
+ (next_phys_addr-cur_phys_addr));
+ }
+ }
+ return nregions;
+}
+
+/*
+ * Divide each region whose vhost virtual address is continous into a few
+ * sub-regions, make sure the physical address within each sub-region are
+ * continous. And fill offset(to GPA) and size etc. information of each
+ * sub-region into regions_hpa.
+ */
+static uint32_t fill_hpa_memory_regions(void *memory)
+{
+ uint32_t regionidx, regionidx_hpa = 0, i, k, page_size = PAGE_SIZE;
+ uint64_t cur_phys_addr = 0, next_phys_addr = 0, vva_start;
+ struct virtio_memory *virtio_memory = (struct virtio_memory *)memory;
+ struct virtio_memory_regions_hpa *mem_region_hpa
+ = virtio_memory->regions_hpa;
+
+ if (mem_region_hpa == NULL)
+ return 0;
+
+ for (regionidx = 0; regionidx < virtio_memory->nregions; regionidx++) {
+ vva_start = virtio_memory->regions[regionidx].guest_phys_address
+ + virtio_memory->regions[regionidx].address_offset;
+ mem_region_hpa[regionidx_hpa].guest_phys_address
+ = virtio_memory->regions[regionidx].guest_phys_address;
+ mem_region_hpa[regionidx_hpa].host_phys_addr_offset =
+ rte_mem_virt2phy((void *)(uintptr_t)(vva_start))
+ - mem_region_hpa[regionidx_hpa].guest_phys_address;
+ LOG_DEBUG(VHOST_CONFIG,
+ "in fill_hpa_regions: guest phys addr start[%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].guest_phys_address));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in fill_hpa_regions: host phys addr start[%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].host_phys_addr_offset));
+ for (i = 0, k = 0;
+ i < virtio_memory->regions[regionidx].memory_size
+ - page_size;
+ i += page_size) {
+ cur_phys_addr = rte_mem_virt2phy(
+ (void *)(uintptr_t)(vva_start + i));
+ next_phys_addr = rte_mem_virt2phy(
+ (void *)(uintptr_t)(vva_start
+ + i + page_size));
+ if ((cur_phys_addr + page_size) != next_phys_addr) {
+ mem_region_hpa[regionidx_hpa].guest_phys_address_end =
+ mem_region_hpa[regionidx_hpa].guest_phys_address
+ + k + page_size;
+ mem_region_hpa[regionidx_hpa].memory_size
+ = k + page_size;
+ LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest "
+ "phys addr end [%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].guest_phys_address_end));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in fill_hpa_regions: guest phys addr "
+ "size [%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].memory_size));
+ mem_region_hpa[regionidx_hpa + 1].guest_phys_address
+ = mem_region_hpa[regionidx_hpa].guest_phys_address_end;
+ ++regionidx_hpa;
+ mem_region_hpa[regionidx_hpa].host_phys_addr_offset =
+ next_phys_addr
+ - mem_region_hpa[regionidx_hpa].guest_phys_address;
+ LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest"
+ " phys addr start[%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].guest_phys_address));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in fill_hpa_regions: host phys addr "
+ "start[%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].host_phys_addr_offset));
+ k = 0;
+ } else {
+ k += page_size;
+ }
+ }
+ mem_region_hpa[regionidx_hpa].guest_phys_address_end
+ = mem_region_hpa[regionidx_hpa].guest_phys_address
+ + k + page_size;
+ mem_region_hpa[regionidx_hpa].memory_size = k + page_size;
+ LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest phys addr end "
+ "[%d]:(%p)\n", regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].guest_phys_address_end));
+ LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest phys addr size "
+ "[%d]:(%p)\n", regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].memory_size));
+ ++regionidx_hpa;
+ }
+ return regionidx_hpa;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_SET_MEM_TABLE
+ * This function creates and populates the memory structure for the device. This includes
+ * storing offsets used to translate buffer addresses.
+ */
+static int
+set_mem_table(struct vhost_device_ctx ctx, const void *mem_regions_addr, uint32_t nregions)
+{
+ struct virtio_net *dev;
+ struct vhost_memory_region *mem_regions;
+ struct virtio_memory *mem;
+ uint64_t size = offsetof(struct vhost_memory, regions);
+ uint32_t regionidx, valid_regions;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ if (dev->mem) {
+ munmap((void*)(uintptr_t)dev->mem->mapped_address, (size_t)dev->mem->mapped_size);
+ free(dev->mem);
+ }
+
+ /* Malloc the memory structure depending on the number of regions. */
+ mem = calloc(1, sizeof(struct virtio_memory) + (sizeof(struct virtio_memory_regions) * nregions));
+ if (mem == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to allocate memory for dev->mem.\n", dev->device_fh);
+ return -1;
+ }
+
+ mem->nregions = nregions;
+
+ mem_regions = (void*)(uintptr_t)((uint64_t)(uintptr_t)mem_regions_addr + size);
+
+ for (regionidx = 0; regionidx < mem->nregions; regionidx++) {
+ /* Populate the region structure for each region. */
+ mem->regions[regionidx].guest_phys_address = mem_regions[regionidx].guest_phys_addr;
+ mem->regions[regionidx].guest_phys_address_end = mem->regions[regionidx].guest_phys_address +
+ mem_regions[regionidx].memory_size;
+ mem->regions[regionidx].memory_size = mem_regions[regionidx].memory_size;
+ mem->regions[regionidx].userspace_address = mem_regions[regionidx].userspace_addr;
+
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") REGION: %u - GPA: %p - QEMU VA: %p - SIZE (%"PRIu64")\n", dev->device_fh,
+ regionidx, (void*)(uintptr_t)mem->regions[regionidx].guest_phys_address,
+ (void*)(uintptr_t)mem->regions[regionidx].userspace_address,
+ mem->regions[regionidx].memory_size);
+
+ /*set the base address mapping*/
+ if (mem->regions[regionidx].guest_phys_address == 0x0) {
+ mem->base_address = mem->regions[regionidx].userspace_address;
+ /* Map VM memory file */
+ if (host_memory_map(dev, mem, ctx.pid, mem->base_address) != 0) {
+ free(mem);
+ return -1;
+ }
+ }
+ }
+
+ /* Check that we have a valid base address. */
+ if (mem->base_address == 0) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find base address of qemu memory file.\n", dev->device_fh);
+ free(mem);
+ return -1;
+ }
+
+ /* Check if all of our regions have valid mappings. Usually one does not exist in the QEMU memory file. */
+ valid_regions = mem->nregions;
+ for (regionidx = 0; regionidx < mem->nregions; regionidx++) {
+ if ((mem->regions[regionidx].userspace_address < mem->base_address) ||
+ (mem->regions[regionidx].userspace_address > (mem->base_address + mem->mapped_size)))
+ valid_regions--;
+ }
+
+ /* If a region does not have a valid mapping we rebuild our memory struct to contain only valid entries. */
+ if (valid_regions != mem->nregions) {
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") Not all memory regions exist in the QEMU mem file. Re-populating mem structure\n",
+ dev->device_fh);
+
+ /* Re-populate the memory structure with only valid regions. Invalid regions are over-written with memmove. */
+ valid_regions = 0;
+
+ for (regionidx = mem->nregions; 0 != regionidx--;) {
+ if ((mem->regions[regionidx].userspace_address < mem->base_address) ||
+ (mem->regions[regionidx].userspace_address > (mem->base_address + mem->mapped_size))) {
+ memmove(&mem->regions[regionidx], &mem->regions[regionidx + 1],
+ sizeof(struct virtio_memory_regions) * valid_regions);
+ } else {
+ valid_regions++;
+ }
+ }
+ }
+ mem->nregions = valid_regions;
+ mem->nregions_hpa = mem->nregions;
+ dev->mem = mem;
+
+ /*
+ * Calculate the address offset for each region. This offset is used to identify the vhost virtual address
+ * corresponding to a QEMU guest physical address.
+ */
+ for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
+ dev->mem->regions[regionidx].address_offset = dev->mem->regions[regionidx].userspace_address - dev->mem->base_address
+ + dev->mem->mapped_address - dev->mem->regions[regionidx].guest_phys_address;
+
+ dev->mem->nregions_hpa
+ += check_hpa_regions(
+ dev->mem->regions[regionidx].guest_phys_address
+ + dev->mem->regions[regionidx].address_offset,
+ dev->mem->regions[regionidx].memory_size);
+ }
+ if (dev->mem->regions_hpa != NULL) {
+ free(dev->mem->regions_hpa);
+ dev->mem->regions_hpa = NULL;
+ }
+
+ dev->mem->regions_hpa = (struct virtio_memory_regions_hpa *) calloc(1,
+ (sizeof(struct virtio_memory_regions_hpa)
+ * dev->mem->nregions_hpa));
+ if (dev->mem->regions_hpa == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to allocate memory for "
+ "dev->mem->regions_hpa.\n", dev->device_fh);
+ return -1;
+ }
+ if (fill_hpa_memory_regions(
+ (void *)dev->mem) != dev->mem->nregions_hpa) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "in set_mem_table: hpa memory regions number mismatch: "
+ "[%d]\n", dev->mem->nregions_hpa);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_SET_VRING_NUM
+ * The virtio device sends us the size of the descriptor ring.
+ */
+static int
+set_vring_num(struct vhost_device_ctx ctx, struct vhost_vring_state *state)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ /* State->index refers to the queue index. The TX queue is 1, RX queue is 0. */
+ dev->virtqueue[state->index]->size = state->num;
+
+ return 0;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_SET_VRING_ADDR
+ * The virtio device sends us the desc, used and avail ring addresses. This function
+ * then converts these to our address space.
+ */
+static int
+set_vring_addr(struct vhost_device_ctx ctx, struct vhost_vring_addr *addr)
+{
+ struct virtio_net *dev;
+ struct vhost_virtqueue *vq;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ /* addr->index refers to the queue index. The TX queue is 1, RX queue is 0. */
+ vq = dev->virtqueue[addr->index];
+
+ /* The addresses are converted from QEMU virtual to Vhost virtual. */
+ vq->desc = (struct vring_desc*)(uintptr_t)qva_to_vva(dev, addr->desc_user_addr);
+ if (vq->desc == 0) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find descriptor ring address.\n", dev->device_fh);
+ return -1;
+ }
+
+ vq->avail = (struct vring_avail*)(uintptr_t)qva_to_vva(dev, addr->avail_user_addr);
+ if (vq->avail == 0) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find available ring address.\n", dev->device_fh);
+ return -1;
+ }
+
+ vq->used = (struct vring_used*)(uintptr_t)qva_to_vva(dev, addr->used_user_addr);
+ if (vq->used == 0) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find used ring address.\n", dev->device_fh);
+ return -1;
+ }
+
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") mapped address desc: %p\n", dev->device_fh, vq->desc);
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") mapped address avail: %p\n", dev->device_fh, vq->avail);
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") mapped address used: %p\n", dev->device_fh, vq->used);
+
+ return 0;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_SET_VRING_BASE
+ * The virtio device sends us the available ring last used index.
+ */
+static int
+set_vring_base(struct vhost_device_ctx ctx, struct vhost_vring_state *state)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ /* State->index refers to the queue index. The TX queue is 1, RX queue is 0. */
+ dev->virtqueue[state->index]->last_used_idx = state->num;
+ dev->virtqueue[state->index]->last_used_idx_res = state->num;
+
+ return 0;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_GET_VRING_BASE
+ * We send the virtio device our available ring last used index.
+ */
+static int
+get_vring_base(struct vhost_device_ctx ctx, uint32_t index, struct vhost_vring_state *state)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ state->index = index;
+ /* State->index refers to the queue index. The TX queue is 1, RX queue is 0. */
+ state->num = dev->virtqueue[state->index]->last_used_idx;
+
+ return 0;
+}
+
+/*
+ * This function uses the eventfd_link kernel module to copy an eventfd file descriptor
+ * provided by QEMU in to our process space.
+ */
+static int
+eventfd_copy(struct virtio_net *dev, struct eventfd_copy *eventfd_copy)
+{
+ int eventfd_link, ret;
+
+ /* Open the character device to the kernel module. */
+ eventfd_link = open(eventfd_cdev, O_RDWR);
+ if (eventfd_link < 0) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") eventfd_link module is not loaded\n", dev->device_fh);
+ return -1;
+ }
+
+ /* Call the IOCTL to copy the eventfd. */
+ ret = ioctl(eventfd_link, EVENTFD_COPY, eventfd_copy);
+ close(eventfd_link);
+
+ if (ret < 0) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") EVENTFD_COPY ioctl failed\n", dev->device_fh);
+ return -1;
+ }
+
+
+ return 0;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_SET_VRING_CALL
+ * The virtio device sends an eventfd to interrupt the guest. This fd gets copied in
+ * to our process space.
+ */
+static int
+set_vring_call(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
+{
+ struct virtio_net *dev;
+ struct eventfd_copy eventfd_kick;
+ struct vhost_virtqueue *vq;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ /* file->index refers to the queue index. The TX queue is 1, RX queue is 0. */
+ vq = dev->virtqueue[file->index];
+
+ if (vq->kickfd)
+ close((int)vq->kickfd);
+
+ /* Populate the eventfd_copy structure and call eventfd_copy. */
+ vq->kickfd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
+ eventfd_kick.source_fd = vq->kickfd;
+ eventfd_kick.target_fd = file->fd;
+ eventfd_kick.target_pid = ctx.pid;
+
+ if (eventfd_copy(dev, &eventfd_kick))
+ return -1;
+
+ return 0;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_SET_VRING_KICK
+ * The virtio device sends an eventfd that it can use to notify us. This fd gets copied in
+ * to our process space.
+ */
+static int
+set_vring_kick(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
+{
+ struct virtio_net *dev;
+ struct eventfd_copy eventfd_call;
+ struct vhost_virtqueue *vq;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ /* file->index refers to the queue index. The TX queue is 1, RX queue is 0. */
+ vq = dev->virtqueue[file->index];
+
+ if (vq->callfd)
+ close((int)vq->callfd);
+
+ /* Populate the eventfd_copy structure and call eventfd_copy. */
+ vq->callfd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
+ eventfd_call.source_fd = vq->callfd;
+ eventfd_call.target_fd = file->fd;
+ eventfd_call.target_pid = ctx.pid;
+
+ if (eventfd_copy(dev, &eventfd_call))
+ return -1;
+
+ return 0;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_NET_SET_BACKEND
+ * To complete device initialisation when the virtio driver is loaded we are provided with a
+ * valid fd for a tap device (not used by us). If this happens then we can add the device to a
+ * data core. When the virtio driver is removed we get fd=-1. At that point we remove the device
+ * from the data core. The device will still exist in the device configuration linked list.
+ */
+static int
+set_backend(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL) {
+ return -1;
+ }
+
+ /* file->index refers to the queue index. The TX queue is 1, RX queue is 0. */
+ dev->virtqueue[file->index]->backend = file->fd;
+
+ /* If the device isn't already running and both backend fds are set we add the device. */
+ if (!(dev->flags & VIRTIO_DEV_RUNNING)) {
+ if (((int)dev->virtqueue[VIRTIO_TXQ]->backend != VIRTIO_DEV_STOPPED) &&
+ ((int)dev->virtqueue[VIRTIO_RXQ]->backend != VIRTIO_DEV_STOPPED))
+ return notify_ops->new_device(dev);
+ /* Otherwise we remove it. */
+ } else
+ if (file->fd == VIRTIO_DEV_STOPPED) {
+ notify_ops->destroy_device(dev);
+ }
+ return 0;
+}
+
+/*
+ * Function pointers are set for the device operations to allow CUSE to call functions
+ * when an IOCTL, device_add or device_release is received.
+ */
+static const struct vhost_net_device_ops vhost_device_ops =
+{
+ .new_device = new_device,
+ .destroy_device = destroy_device,
+
+ .get_features = get_features,
+ .set_features = set_features,
+
+ .set_mem_table = set_mem_table,
+
+ .set_vring_num = set_vring_num,
+ .set_vring_addr = set_vring_addr,
+ .set_vring_base = set_vring_base,
+ .get_vring_base = get_vring_base,
+
+ .set_vring_kick = set_vring_kick,
+ .set_vring_call = set_vring_call,
+
+ .set_backend = set_backend,
+
+ .set_owner = set_owner,
+ .reset_owner = reset_owner,
+};
+
+/*
+ * Called by main to setup callbacks when registering CUSE device.
+ */
+struct vhost_net_device_ops const *
+get_virtio_net_callbacks(void)
+{
+ return &vhost_device_ops;
+}
+
+/*
+ * Register ops so that we can add/remove device to data core.
+ */
+int
+init_virtio_net(struct virtio_net_device_ops const * const ops)
+{
+ notify_ops = ops;
+
+ return 0;
+}
+
+/*
+ * Currently not used as we Ctrl+c to exit application.
+ */
+int
+deinit_virtio_net(void)
+{
+ return 0;
+}
diff --git a/lib/librte_vhost/virtio-net.h b/lib/librte_vhost/virtio-net.h
new file mode 100644
index 0000000..1a2f0dc
--- /dev/null
+++ b/lib/librte_vhost/virtio-net.h
@@ -0,0 +1,161 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _VIRTIO_NET_H_
+#define _VIRTIO_NET_H_
+
+/* Used to indicate that the device is running on a data core */
+#define VIRTIO_DEV_RUNNING 1
+
+/* Backend value set by guest. */
+#define VIRTIO_DEV_STOPPED -1
+
+#define PAGE_SIZE 4096
+
+/* Enum for virtqueue management. */
+enum {VIRTIO_RXQ, VIRTIO_TXQ, VIRTIO_QNUM};
+
+#define BUF_VECTOR_MAX 256
+
+/*
+ * Structure contains buffer address, length and descriptor index
+ * from vring to do scatter RX.
+*/
+struct buf_vector {
+uint64_t buf_addr;
+uint32_t buf_len;
+uint32_t desc_idx;
+};
+
+/*
+ * Structure contains variables relevant to TX/RX virtqueues.
+ */
+struct vhost_virtqueue
+{
+ struct vring_desc *desc; /* Virtqueue descriptor ring. */
+ struct vring_avail *avail; /* Virtqueue available ring. */
+ struct vring_used *used; /* Virtqueue used ring. */
+ uint32_t size; /* Size of descriptor ring. */
+ uint32_t backend; /* Backend value to determine if device should started/stopped. */
+ uint16_t vhost_hlen; /* Vhost header length (varies depending on RX merge buffers. */
+ volatile uint16_t last_used_idx; /* Last index used on the available ring */
+ volatile uint16_t last_used_idx_res; /* Used for multiple devices reserving buffers. */
+ eventfd_t callfd; /* Currently unused as polling mode is enabled. */
+ eventfd_t kickfd; /* Used to notify the guest (trigger interrupt). */
+ /* Used for scatter RX. */
+ struct buf_vector buf_vec[BUF_VECTOR_MAX];
+} __rte_cache_aligned;
+
+/*
+ * Device structure contains all configuration information relating to the device.
+ */
+struct virtio_net
+{
+ struct vhost_virtqueue *virtqueue[VIRTIO_QNUM]; /* Contains all virtqueue information. */
+ struct virtio_memory *mem; /* QEMU memory and memory region information. */
+ struct ether_addr mac_address; /* Device MAC address (Obtained on first TX packet). */
+ uint64_t features; /* Negotiated feature set. */
+ uint64_t device_fh; /* device identifier. */
+ uint32_t vmdq_rx_q; /* RX VMDQ queue number. */
+ uint32_t flags; /* Device flags. Only used to check if device is running on data core. */
+ uint32_t vlan_tag; /* Vlan tag for device. Currently set to device_id (0-63). */
+ uint16_t coreid; /* Data core that the device is added to. */
+ volatile uint8_t ready; /* A device is set as ready if the MAC address has been set. */
+ volatile uint8_t remove; /* Device is marked for removal from the data core. */
+} __rte_cache_aligned;
+
+/*
+ * Device linked list structure for configuration.
+ */
+struct virtio_net_config_ll
+{
+ struct virtio_net dev; /* Virtio device. */
+ struct virtio_net_config_ll *next; /* Next entry on linked list. */
+};
+
+/*
+ * Information relating to memory regions including offsets to addresses in QEMUs memory file.
+ */
+struct virtio_memory_regions {
+ uint64_t guest_phys_address; /* Base guest physical address of region. */
+ uint64_t guest_phys_address_end; /* End guest physical address of region. */
+ uint64_t memory_size; /* Size of region. */
+ uint64_t userspace_address; /* Base userspace address of region. */
+ uint64_t address_offset; /* Offset of region for address translation. */
+};
+
+/*
+ * Information relating to memory regions including offsets to
+ * addresses in host physical space.
+ */
+struct virtio_memory_regions_hpa {
+ /* Base guest physical address of region. */
+ uint64_t guest_phys_address;
+ /* End guest physical address of region. */
+ uint64_t guest_phys_address_end;
+ /* Size of region. */
+ uint64_t memory_size;
+ /* Offset of region for gpa to hpa translation. */
+ uint64_t host_phys_addr_offset;
+};
+
+/*
+ * Memory structure includes region and mapping information.
+ */
+struct virtio_memory {
+ uint64_t base_address; /* Base QEMU userspace address of the memory file. */
+ uint64_t mapped_address; /* Mapped address of memory file base in our applications memory space. */
+ uint64_t mapped_size; /* Total size of memory file. */
+ uint32_t nregions; /* Number of memory regions. */
+ /* Number of memory regions for gpa to hpa translation. */
+ uint32_t nregions_hpa;
+ /* Memory region information for gpa to hpa translation. */
+ struct virtio_memory_regions_hpa *regions_hpa;
+ /* Memory region information. */
+ struct virtio_memory_regions regions[0];
+};
+
+/*
+ * Device operations to add/remove device.
+ */
+struct virtio_net_device_ops {
+ int (* new_device) (struct virtio_net *); /* Add device. */
+ void (* destroy_device) (volatile struct virtio_net *); /* Remove device. */
+};
+
+int init_virtio_net(struct virtio_net_device_ops const * const);
+int deinit_virtio_net(void);
+
+struct vhost_net_device_ops const * get_virtio_net_callbacks(void);
+
+#endif /* _VIRTIO_NET_H_ */
--
1.8.1.4
^ permalink raw reply [flat|nested] 14+ messages in thread* [dpdk-dev] [PATCH v4 2/5] lib/librte_vhost: re-factor vhost lib for subsequent transform
2014-09-12 10:54 [dpdk-dev] [PATCH v4 0/5] lib/librte_vhost: user space vhost cuse driver library Huawei Xie
2014-09-12 10:55 ` [dpdk-dev] [PATCH v4 1/5] lib/librte_vhost: mv vhost example to vhost lib directory for further code re-factoring Huawei Xie
@ 2014-09-12 10:55 ` Huawei Xie
2014-09-12 10:55 ` [dpdk-dev] [PATCH v4 3/5] lib/librte_vhost: vhost lib refactor Huawei Xie
` (5 subsequent siblings)
7 siblings, 0 replies; 14+ messages in thread
From: Huawei Xie @ 2014-09-12 10:55 UTC (permalink / raw)
To: dev
This patch does simple split of the original vhost example source files.
vhost rx/tx functions virtio_dev_rx/tx are copied from main.c to new file
vhost_rxtx.c.
main.c and main.h are removed. A new vhost example patchset will be submitted
later based on these two files.
Makefile for old example is removed.
virtio-net.h is renamed to rte_virtio_net.h as API header file.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Tommy Long <thomas.long@intel.com>
---
lib/librte_vhost/Makefile | 60 -
lib/librte_vhost/main.c | 3722 -------------------------------------
lib/librte_vhost/main.h | 86 -
lib/librte_vhost/rte_virtio_net.h | 161 ++
lib/librte_vhost/vhost_rxtx.c | 281 +++
lib/librte_vhost/virtio-net.h | 161 --
6 files changed, 442 insertions(+), 4029 deletions(-)
delete mode 100644 lib/librte_vhost/Makefile
delete mode 100644 lib/librte_vhost/main.c
delete mode 100644 lib/librte_vhost/main.h
create mode 100644 lib/librte_vhost/rte_virtio_net.h
create mode 100644 lib/librte_vhost/vhost_rxtx.c
delete mode 100644 lib/librte_vhost/virtio-net.h
diff --git a/lib/librte_vhost/Makefile b/lib/librte_vhost/Makefile
deleted file mode 100644
index f45f83f..0000000
--- a/lib/librte_vhost/Makefile
+++ /dev/null
@@ -1,60 +0,0 @@
-# BSD LICENSE
-#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-ifeq ($(RTE_SDK),)
-$(error "Please define RTE_SDK environment variable")
-endif
-
-# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(CONFIG_RTE_EXEC_ENV),"linuxapp")
-$(info This application can only operate in a linuxapp environment, \
-please change the definition of the RTE_TARGET environment variable)
-all:
-else
-
-# binary name
-APP = vhost-switch
-
-# all source are stored in SRCS-y
-#SRCS-y := cusedrv.c loopback-userspace.c
-SRCS-y := main.c virtio-net.c vhost-net-cdev.c
-
-CFLAGS += -O2 -I/usr/local/include -D_FILE_OFFSET_BITS=64 -Wno-unused-parameter
-CFLAGS += $(WERROR_FLAGS)
-LDFLAGS += -lfuse
-
-include $(RTE_SDK)/mk/rte.extapp.mk
-
-endif
diff --git a/lib/librte_vhost/main.c b/lib/librte_vhost/main.c
deleted file mode 100644
index 7d9e6a2..0000000
--- a/lib/librte_vhost/main.c
+++ /dev/null
@@ -1,3722 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <arpa/inet.h>
-#include <getopt.h>
-#include <linux/if_ether.h>
-#include <linux/if_vlan.h>
-#include <linux/virtio_net.h>
-#include <linux/virtio_ring.h>
-#include <signal.h>
-#include <stdint.h>
-#include <sys/eventfd.h>
-#include <sys/param.h>
-#include <unistd.h>
-
-#include <rte_atomic.h>
-#include <rte_cycles.h>
-#include <rte_ethdev.h>
-#include <rte_log.h>
-#include <rte_string_fns.h>
-#include <rte_malloc.h>
-
-#include "main.h"
-#include "virtio-net.h"
-#include "vhost-net-cdev.h"
-
-#define MAX_QUEUES 128
-
-/* the maximum number of external ports supported */
-#define MAX_SUP_PORTS 1
-
-/*
- * Calculate the number of buffers needed per port
- */
-#define NUM_MBUFS_PER_PORT ((MAX_QUEUES*RTE_TEST_RX_DESC_DEFAULT) + \
- (num_switching_cores*MAX_PKT_BURST) + \
- (num_switching_cores*RTE_TEST_TX_DESC_DEFAULT) +\
- (num_switching_cores*MBUF_CACHE_SIZE))
-
-#define MBUF_CACHE_SIZE 128
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
-
-/*
- * No frame data buffer allocated from host are required for zero copy
- * implementation, guest will allocate the frame data buffer, and vhost
- * directly use it.
- */
-#define VIRTIO_DESCRIPTOR_LEN_ZCP 1518
-#define MBUF_SIZE_ZCP (VIRTIO_DESCRIPTOR_LEN_ZCP + sizeof(struct rte_mbuf) \
- + RTE_PKTMBUF_HEADROOM)
-#define MBUF_CACHE_SIZE_ZCP 0
-
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-#define RX_PTHRESH 8 /* Default values of RX prefetch threshold reg. */
-#define RX_HTHRESH 8 /* Default values of RX host threshold reg. */
-#define RX_WTHRESH 4 /* Default values of RX write-back threshold reg. */
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-#define TX_PTHRESH 36 /* Default values of TX prefetch threshold reg. */
-#define TX_HTHRESH 0 /* Default values of TX host threshold reg. */
-#define TX_WTHRESH 0 /* Default values of TX write-back threshold reg. */
-
-#define MAX_PKT_BURST 32 /* Max burst size for RX/TX */
-#define MAX_MRG_PKT_BURST 16 /* Max burst for merge buffers. Set to 1 due to performance issue. */
-#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
-
-#define BURST_RX_WAIT_US 15 /* Defines how long we wait between retries on RX */
-#define BURST_RX_RETRIES 4 /* Number of retries on RX. */
-
-#define JUMBO_FRAME_MAX_SIZE 0x2600
-
-/* State of virtio device. */
-#define DEVICE_MAC_LEARNING 0
-#define DEVICE_RX 1
-#define DEVICE_SAFE_REMOVE 2
-
-/* Config_core_flag status definitions. */
-#define REQUEST_DEV_REMOVAL 1
-#define ACK_DEV_REMOVAL 0
-
-/* Configurable number of RX/TX ring descriptors */
-#define RTE_TEST_RX_DESC_DEFAULT 1024
-#define RTE_TEST_TX_DESC_DEFAULT 512
-
-/*
- * Need refine these 2 macros for legacy and DPDK based front end:
- * Max vring avail descriptor/entries from guest - MAX_PKT_BURST
- * And then adjust power 2.
- */
-/*
- * For legacy front end, 128 descriptors,
- * half for virtio header, another half for mbuf.
- */
-#define RTE_TEST_RX_DESC_DEFAULT_ZCP 32 /* legacy: 32, DPDK virt FE: 128. */
-#define RTE_TEST_TX_DESC_DEFAULT_ZCP 64 /* legacy: 64, DPDK virt FE: 64. */
-
-/* Get first 4 bytes in mbuf headroom. */
-#define MBUF_HEADROOM_UINT32(mbuf) (*(uint32_t *)((uint8_t *)(mbuf) \
- + sizeof(struct rte_mbuf)))
-
-/* true if x is a power of 2 */
-#define POWEROF2(x) ((((x)-1) & (x)) == 0)
-
-#define INVALID_PORT_ID 0xFF
-
-/* Max number of devices. Limited by vmdq. */
-#define MAX_DEVICES 64
-
-/* Size of buffers used for snprintfs. */
-#define MAX_PRINT_BUFF 6072
-
-/* Maximum character device basename size. */
-#define MAX_BASENAME_SZ 10
-
-/* Maximum long option length for option parsing. */
-#define MAX_LONG_OPT_SZ 64
-
-/* Used to compare MAC addresses. */
-#define MAC_ADDR_CMP 0xFFFFFFFFFFFFULL
-
-/* Number of descriptors per cacheline. */
-#define DESC_PER_CACHELINE (CACHE_LINE_SIZE / sizeof(struct vring_desc))
-
-/* mask of enabled ports */
-static uint32_t enabled_port_mask = 0;
-
-/*Number of switching cores enabled*/
-static uint32_t num_switching_cores = 0;
-
-/* number of devices/queues to support*/
-static uint32_t num_queues = 0;
-uint32_t num_devices = 0;
-
-/*
- * Enable zero copy, pkts buffer will directly dma to hw descriptor,
- * disabled on default.
- */
-static uint32_t zero_copy;
-
-/* number of descriptors to apply*/
-static uint32_t num_rx_descriptor = RTE_TEST_RX_DESC_DEFAULT_ZCP;
-static uint32_t num_tx_descriptor = RTE_TEST_TX_DESC_DEFAULT_ZCP;
-
-/* max ring descriptor, ixgbe, i40e, e1000 all are 4096. */
-#define MAX_RING_DESC 4096
-
-struct vpool {
- struct rte_mempool *pool;
- struct rte_ring *ring;
- uint32_t buf_size;
-} vpool_array[MAX_QUEUES+MAX_QUEUES];
-
-/* Enable VM2VM communications. If this is disabled then the MAC address compare is skipped. */
-typedef enum {
- VM2VM_DISABLED = 0,
- VM2VM_SOFTWARE = 1,
- VM2VM_HARDWARE = 2,
- VM2VM_LAST
-} vm2vm_type;
-static vm2vm_type vm2vm_mode = VM2VM_SOFTWARE;
-
-/* The type of host physical address translated from guest physical address. */
-typedef enum {
- PHYS_ADDR_CONTINUOUS = 0,
- PHYS_ADDR_CROSS_SUBREG = 1,
- PHYS_ADDR_INVALID = 2,
- PHYS_ADDR_LAST
-} hpa_type;
-
-/* Enable stats. */
-static uint32_t enable_stats = 0;
-/* Enable retries on RX. */
-static uint32_t enable_retry = 1;
-/* Specify timeout (in useconds) between retries on RX. */
-static uint32_t burst_rx_delay_time = BURST_RX_WAIT_US;
-/* Specify the number of retries on RX. */
-static uint32_t burst_rx_retry_num = BURST_RX_RETRIES;
-
-/* Character device basename. Can be set by user. */
-static char dev_basename[MAX_BASENAME_SZ] = "vhost-net";
-
-/* Charater device index. Can be set by user. */
-static uint32_t dev_index = 0;
-
-/* This can be set by the user so it is made available here. */
-extern uint64_t VHOST_FEATURES;
-
-/* Default configuration for rx and tx thresholds etc. */
-static struct rte_eth_rxconf rx_conf_default = {
- .rx_thresh = {
- .pthresh = RX_PTHRESH,
- .hthresh = RX_HTHRESH,
- .wthresh = RX_WTHRESH,
- },
- .rx_drop_en = 1,
-};
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe/igb PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-static struct rte_eth_txconf tx_conf_default = {
- .tx_thresh = {
- .pthresh = TX_PTHRESH,
- .hthresh = TX_HTHRESH,
- .wthresh = TX_WTHRESH,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
-};
-
-/* empty vmdq configuration structure. Filled in programatically */
-static struct rte_eth_conf vmdq_conf_default = {
- .rxmode = {
- .mq_mode = ETH_MQ_RX_VMDQ_ONLY,
- .split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- /*
- * It is necessary for 1G NIC such as I350,
- * this fixes bug of ipv4 forwarding in guest can't
- * forward pakets from one virtio dev to another virtio dev.
- */
- .hw_vlan_strip = 1, /**< VLAN strip enabled. */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
- },
-
- .txmode = {
- .mq_mode = ETH_MQ_TX_NONE,
- },
- .rx_adv_conf = {
- /*
- * should be overridden separately in code with
- * appropriate values
- */
- .vmdq_rx_conf = {
- .nb_queue_pools = ETH_8_POOLS,
- .enable_default_pool = 0,
- .default_pool = 0,
- .nb_pool_maps = 0,
- .pool_map = {{0, 0},},
- },
- },
-};
-
-static unsigned lcore_ids[RTE_MAX_LCORE];
-static uint8_t ports[RTE_MAX_ETHPORTS];
-static unsigned num_ports = 0; /**< The number of ports specified in command line */
-
-static const uint16_t external_pkt_default_vlan_tag = 2000;
-const uint16_t vlan_tags[] = {
- 1000, 1001, 1002, 1003, 1004, 1005, 1006, 1007,
- 1008, 1009, 1010, 1011, 1012, 1013, 1014, 1015,
- 1016, 1017, 1018, 1019, 1020, 1021, 1022, 1023,
- 1024, 1025, 1026, 1027, 1028, 1029, 1030, 1031,
- 1032, 1033, 1034, 1035, 1036, 1037, 1038, 1039,
- 1040, 1041, 1042, 1043, 1044, 1045, 1046, 1047,
- 1048, 1049, 1050, 1051, 1052, 1053, 1054, 1055,
- 1056, 1057, 1058, 1059, 1060, 1061, 1062, 1063,
-};
-
-/* ethernet addresses of ports */
-static struct ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
-
-/* heads for the main used and free linked lists for the data path. */
-static struct virtio_net_data_ll *ll_root_used = NULL;
-static struct virtio_net_data_ll *ll_root_free = NULL;
-
-/* Array of data core structures containing information on individual core linked lists. */
-static struct lcore_info lcore_info[RTE_MAX_LCORE];
-
-/* Used for queueing bursts of TX packets. */
-struct mbuf_table {
- unsigned len;
- unsigned txq_id;
- struct rte_mbuf *m_table[MAX_PKT_BURST];
-};
-
-/* TX queue for each data core. */
-struct mbuf_table lcore_tx_queue[RTE_MAX_LCORE];
-
-/* TX queue fori each virtio device for zero copy. */
-struct mbuf_table tx_queue_zcp[MAX_QUEUES];
-
-/* Vlan header struct used to insert vlan tags on TX. */
-struct vlan_ethhdr {
- unsigned char h_dest[ETH_ALEN];
- unsigned char h_source[ETH_ALEN];
- __be16 h_vlan_proto;
- __be16 h_vlan_TCI;
- __be16 h_vlan_encapsulated_proto;
-};
-
-/* IPv4 Header */
-struct ipv4_hdr {
- uint8_t version_ihl; /**< version and header length */
- uint8_t type_of_service; /**< type of service */
- uint16_t total_length; /**< length of packet */
- uint16_t packet_id; /**< packet ID */
- uint16_t fragment_offset; /**< fragmentation offset */
- uint8_t time_to_live; /**< time to live */
- uint8_t next_proto_id; /**< protocol ID */
- uint16_t hdr_checksum; /**< header checksum */
- uint32_t src_addr; /**< source address */
- uint32_t dst_addr; /**< destination address */
-} __attribute__((__packed__));
-
-/* Header lengths. */
-#define VLAN_HLEN 4
-#define VLAN_ETH_HLEN 18
-
-/* Per-device statistics struct */
-struct device_statistics {
- uint64_t tx_total;
- rte_atomic64_t rx_total_atomic;
- uint64_t rx_total;
- uint64_t tx;
- rte_atomic64_t rx_atomic;
- uint64_t rx;
-} __rte_cache_aligned;
-struct device_statistics dev_statistics[MAX_DEVICES];
-
-/*
- * Builds up the correct configuration for VMDQ VLAN pool map
- * according to the pool & queue limits.
- */
-static inline int
-get_eth_conf(struct rte_eth_conf *eth_conf, uint32_t num_devices)
-{
- struct rte_eth_vmdq_rx_conf conf;
- unsigned i;
-
- memset(&conf, 0, sizeof(conf));
- conf.nb_queue_pools = (enum rte_eth_nb_pools)num_devices;
- conf.nb_pool_maps = num_devices;
- conf.enable_loop_back =
- vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back;
-
- for (i = 0; i < conf.nb_pool_maps; i++) {
- conf.pool_map[i].vlan_id = vlan_tags[ i ];
- conf.pool_map[i].pools = (1UL << i);
- }
-
- (void)(rte_memcpy(eth_conf, &vmdq_conf_default, sizeof(*eth_conf)));
- (void)(rte_memcpy(ð_conf->rx_adv_conf.vmdq_rx_conf, &conf,
- sizeof(eth_conf->rx_adv_conf.vmdq_rx_conf)));
- return 0;
-}
-
-/*
- * Validate the device number according to the max pool number gotten form
- * dev_info. If the device number is invalid, give the error message and
- * return -1. Each device must have its own pool.
- */
-static inline int
-validate_num_devices(uint32_t max_nb_devices)
-{
- if (num_devices > max_nb_devices) {
- RTE_LOG(ERR, VHOST_PORT, "invalid number of devices\n");
- return -1;
- }
- return 0;
-}
-
-/*
- * Initialises a given port using global settings and with the rx buffers
- * coming from the mbuf_pool passed as parameter
- */
-static inline int
-port_init(uint8_t port)
-{
- struct rte_eth_dev_info dev_info;
- struct rte_eth_conf port_conf;
- uint16_t rx_rings, tx_rings;
- uint16_t rx_ring_size, tx_ring_size;
- int retval;
- uint16_t q;
-
- /* The max pool number from dev_info will be used to validate the pool number specified in cmd line */
- rte_eth_dev_info_get (port, &dev_info);
-
- /*configure the number of supported virtio devices based on VMDQ limits */
- num_devices = dev_info.max_vmdq_pools;
- num_queues = dev_info.max_rx_queues;
-
- if (zero_copy) {
- rx_ring_size = num_rx_descriptor;
- tx_ring_size = num_tx_descriptor;
- tx_rings = dev_info.max_tx_queues;
- } else {
- rx_ring_size = RTE_TEST_RX_DESC_DEFAULT;
- tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
- tx_rings = (uint16_t)rte_lcore_count();
- }
-
- retval = validate_num_devices(MAX_DEVICES);
- if (retval < 0)
- return retval;
-
- /* Get port configuration. */
- retval = get_eth_conf(&port_conf, num_devices);
- if (retval < 0)
- return retval;
-
- if (port >= rte_eth_dev_count()) return -1;
-
- rx_rings = (uint16_t)num_queues,
- /* Configure ethernet device. */
- retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
- if (retval != 0)
- return retval;
-
- /* Setup the queues. */
- for (q = 0; q < rx_rings; q ++) {
- retval = rte_eth_rx_queue_setup(port, q, rx_ring_size,
- rte_eth_dev_socket_id(port), &rx_conf_default,
- vpool_array[q].pool);
- if (retval < 0)
- return retval;
- }
- for (q = 0; q < tx_rings; q ++) {
- retval = rte_eth_tx_queue_setup(port, q, tx_ring_size,
- rte_eth_dev_socket_id(port), &tx_conf_default);
- if (retval < 0)
- return retval;
- }
-
- /* Start the device. */
- retval = rte_eth_dev_start(port);
- if (retval < 0) {
- RTE_LOG(ERR, VHOST_DATA, "Failed to start the device.\n");
- return retval;
- }
-
- rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
- RTE_LOG(INFO, VHOST_PORT, "Max virtio devices supported: %u\n", num_devices);
- RTE_LOG(INFO, VHOST_PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
- " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
- (unsigned)port,
- vmdq_ports_eth_addr[port].addr_bytes[0],
- vmdq_ports_eth_addr[port].addr_bytes[1],
- vmdq_ports_eth_addr[port].addr_bytes[2],
- vmdq_ports_eth_addr[port].addr_bytes[3],
- vmdq_ports_eth_addr[port].addr_bytes[4],
- vmdq_ports_eth_addr[port].addr_bytes[5]);
-
- return 0;
-}
-
-/*
- * Set character device basename.
- */
-static int
-us_vhost_parse_basename(const char *q_arg)
-{
- /* parse number string */
-
- if (strnlen(q_arg, MAX_BASENAME_SZ) > MAX_BASENAME_SZ)
- return -1;
- else
- snprintf((char*)&dev_basename, MAX_BASENAME_SZ, "%s", q_arg);
-
- return 0;
-}
-
-/*
- * Parse the portmask provided at run time.
- */
-static int
-parse_portmask(const char *portmask)
-{
- char *end = NULL;
- unsigned long pm;
-
- errno = 0;
-
- /* parse hexadecimal string */
- pm = strtoul(portmask, &end, 16);
- if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
- return -1;
-
- if (pm == 0)
- return -1;
-
- return pm;
-
-}
-
-/*
- * Parse num options at run time.
- */
-static int
-parse_num_opt(const char *q_arg, uint32_t max_valid_value)
-{
- char *end = NULL;
- unsigned long num;
-
- errno = 0;
-
- /* parse unsigned int string */
- num = strtoul(q_arg, &end, 10);
- if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
- return -1;
-
- if (num > max_valid_value)
- return -1;
-
- return num;
-
-}
-
-/*
- * Display usage
- */
-static void
-us_vhost_usage(const char *prgname)
-{
- RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
- " --vm2vm [0|1|2]\n"
- " --rx_retry [0|1] --mergeable [0|1] --stats [0-N]\n"
- " --dev-basename <name> --dev-index [0-N]\n"
- " --nb-devices ND\n"
- " -p PORTMASK: Set mask for ports to be used by application\n"
- " --vm2vm [0|1|2]: disable/software(default)/hardware vm2vm comms\n"
- " --rx-retry [0|1]: disable/enable(default) retries on rx. Enable retry if destintation queue is full\n"
- " --rx-retry-delay [0-N]: timeout(in usecond) between retries on RX. This makes effect only if retries on rx enabled\n"
- " --rx-retry-num [0-N]: the number of retries on rx. This makes effect only if retries on rx enabled\n"
- " --mergeable [0|1]: disable(default)/enable RX mergeable buffers\n"
- " --stats [0-N]: 0: Disable stats, N: Time in seconds to print stats\n"
- " --dev-basename: The basename to be used for the character device.\n"
- " --dev-index [0-N]: Defaults to zero if not used. Index is appended to basename.\n"
- " --zero-copy [0|1]: disable(default)/enable rx/tx "
- "zero copy\n"
- " --rx-desc-num [0-N]: the number of descriptors on rx, "
- "used only when zero copy is enabled.\n"
- " --tx-desc-num [0-N]: the number of descriptors on tx, "
- "used only when zero copy is enabled.\n",
- prgname);
-}
-
-/*
- * Parse the arguments given in the command line of the application.
- */
-static int
-us_vhost_parse_args(int argc, char **argv)
-{
- int opt, ret;
- int option_index;
- unsigned i;
- const char *prgname = argv[0];
- static struct option long_option[] = {
- {"vm2vm", required_argument, NULL, 0},
- {"rx-retry", required_argument, NULL, 0},
- {"rx-retry-delay", required_argument, NULL, 0},
- {"rx-retry-num", required_argument, NULL, 0},
- {"mergeable", required_argument, NULL, 0},
- {"stats", required_argument, NULL, 0},
- {"dev-basename", required_argument, NULL, 0},
- {"dev-index", required_argument, NULL, 0},
- {"zero-copy", required_argument, NULL, 0},
- {"rx-desc-num", required_argument, NULL, 0},
- {"tx-desc-num", required_argument, NULL, 0},
- {NULL, 0, 0, 0},
- };
-
- /* Parse command line */
- while ((opt = getopt_long(argc, argv, "p:",long_option, &option_index)) != EOF) {
- switch (opt) {
- /* Portmask */
- case 'p':
- enabled_port_mask = parse_portmask(optarg);
- if (enabled_port_mask == 0) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid portmask\n");
- us_vhost_usage(prgname);
- return -1;
- }
- break;
-
- case 0:
- /* Enable/disable vm2vm comms. */
- if (!strncmp(long_option[option_index].name, "vm2vm",
- MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, (VM2VM_LAST - 1));
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG,
- "Invalid argument for "
- "vm2vm [0|1|2]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- vm2vm_mode = (vm2vm_type)ret;
- }
- }
-
- /* Enable/disable retries on RX. */
- if (!strncmp(long_option[option_index].name, "rx-retry", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, 1);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry [0|1]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- enable_retry = ret;
- }
- }
-
- /* Specify the retries delay time (in useconds) on RX. */
- if (!strncmp(long_option[option_index].name, "rx-retry-delay", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, INT32_MAX);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry-delay [0-N]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- burst_rx_delay_time = ret;
- }
- }
-
- /* Specify the retries number on RX. */
- if (!strncmp(long_option[option_index].name, "rx-retry-num", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, INT32_MAX);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry-num [0-N]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- burst_rx_retry_num = ret;
- }
- }
-
- /* Enable/disable RX mergeable buffers. */
- if (!strncmp(long_option[option_index].name, "mergeable", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, 1);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for mergeable [0|1]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- if (ret) {
- vmdq_conf_default.rxmode.jumbo_frame = 1;
- vmdq_conf_default.rxmode.max_rx_pkt_len
- = JUMBO_FRAME_MAX_SIZE;
- VHOST_FEATURES = (1ULL << VIRTIO_NET_F_MRG_RXBUF);
- }
- }
- }
-
- /* Enable/disable stats. */
- if (!strncmp(long_option[option_index].name, "stats", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, INT32_MAX);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for stats [0..N]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- enable_stats = ret;
- }
- }
-
- /* Set character device basename. */
- if (!strncmp(long_option[option_index].name, "dev-basename", MAX_LONG_OPT_SZ)) {
- if (us_vhost_parse_basename(optarg) == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device basename (Max %d characters)\n", MAX_BASENAME_SZ);
- us_vhost_usage(prgname);
- return -1;
- }
- }
-
- /* Set character device index. */
- if (!strncmp(long_option[option_index].name, "dev-index", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, INT32_MAX);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device index [0..N]\n");
- us_vhost_usage(prgname);
- return -1;
- } else
- dev_index = ret;
- }
-
- /* Enable/disable rx/tx zero copy. */
- if (!strncmp(long_option[option_index].name,
- "zero-copy", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, 1);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG,
- "Invalid argument"
- " for zero-copy [0|1]\n");
- us_vhost_usage(prgname);
- return -1;
- } else
- zero_copy = ret;
-
- if (zero_copy) {
-#ifdef RTE_MBUF_SCATTER_GATHER
- RTE_LOG(ERR, VHOST_CONFIG, "Before running "
- "zero copy vhost APP, please "
- "disable RTE_MBUF_SCATTER_GATHER\n"
- "in config file and then rebuild DPDK "
- "core lib!\n"
- "Otherwise please disable zero copy "
- "flag in command line!\n");
- return -1;
-#endif
- }
- }
-
- /* Specify the descriptor number on RX. */
- if (!strncmp(long_option[option_index].name,
- "rx-desc-num", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, MAX_RING_DESC);
- if ((ret == -1) || (!POWEROF2(ret))) {
- RTE_LOG(INFO, VHOST_CONFIG,
- "Invalid argument for rx-desc-num[0-N],"
- "power of 2 required.\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- num_rx_descriptor = ret;
- }
- }
-
- /* Specify the descriptor number on TX. */
- if (!strncmp(long_option[option_index].name,
- "tx-desc-num", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, MAX_RING_DESC);
- if ((ret == -1) || (!POWEROF2(ret))) {
- RTE_LOG(INFO, VHOST_CONFIG,
- "Invalid argument for tx-desc-num [0-N],"
- "power of 2 required.\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- num_tx_descriptor = ret;
- }
- }
-
- break;
-
- /* Invalid option - print options. */
- default:
- us_vhost_usage(prgname);
- return -1;
- }
- }
-
- for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
- if (enabled_port_mask & (1 << i))
- ports[num_ports++] = (uint8_t)i;
- }
-
- if ((num_ports == 0) || (num_ports > MAX_SUP_PORTS)) {
- RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
- "but only %u port can be enabled\n",num_ports, MAX_SUP_PORTS);
- return -1;
- }
-
- if ((zero_copy == 1) && (vm2vm_mode == VM2VM_SOFTWARE)) {
- RTE_LOG(INFO, VHOST_PORT,
- "Vhost zero copy doesn't support software vm2vm,"
- "please specify 'vm2vm 2' to use hardware vm2vm.\n");
- return -1;
- }
-
- if ((zero_copy == 1) && (vmdq_conf_default.rxmode.jumbo_frame == 1)) {
- RTE_LOG(INFO, VHOST_PORT,
- "Vhost zero copy doesn't support jumbo frame,"
- "please specify '--mergeable 0' to disable the "
- "mergeable feature.\n");
- return -1;
- }
-
- return 0;
-}
-
-/*
- * Update the global var NUM_PORTS and array PORTS according to system ports number
- * and return valid ports number
- */
-static unsigned check_ports_num(unsigned nb_ports)
-{
- unsigned valid_num_ports = num_ports;
- unsigned portid;
-
- if (num_ports > nb_ports) {
- RTE_LOG(INFO, VHOST_PORT, "\nSpecified port number(%u) exceeds total system port number(%u)\n",
- num_ports, nb_ports);
- num_ports = nb_ports;
- }
-
- for (portid = 0; portid < num_ports; portid ++) {
- if (ports[portid] >= nb_ports) {
- RTE_LOG(INFO, VHOST_PORT, "\nSpecified port ID(%u) exceeds max system port ID(%u)\n",
- ports[portid], (nb_ports - 1));
- ports[portid] = INVALID_PORT_ID;
- valid_num_ports--;
- }
- }
- return valid_num_ports;
-}
-
-/*
- * Macro to print out packet contents. Wrapped in debug define so that the
- * data path is not effected when debug is disabled.
- */
-#ifdef DEBUG
-#define PRINT_PACKET(device, addr, size, header) do { \
- char *pkt_addr = (char*)(addr); \
- unsigned int index; \
- char packet[MAX_PRINT_BUFF]; \
- \
- if ((header)) \
- snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Header size %d: ", (device->device_fh), (size)); \
- else \
- snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Packet size %d: ", (device->device_fh), (size)); \
- for (index = 0; index < (size); index++) { \
- snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), \
- "%02hhx ", pkt_addr[index]); \
- } \
- snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), "\n"); \
- \
- LOG_DEBUG(VHOST_DATA, "%s", packet); \
-} while(0)
-#else
-#define PRINT_PACKET(device, addr, size, header) do{} while(0)
-#endif
-
-/*
- * Function to convert guest physical addresses to vhost virtual addresses. This
- * is used to convert virtio buffer addresses.
- */
-static inline uint64_t __attribute__((always_inline))
-gpa_to_vva(struct virtio_net *dev, uint64_t guest_pa)
-{
- struct virtio_memory_regions *region;
- uint32_t regionidx;
- uint64_t vhost_va = 0;
-
- for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
- region = &dev->mem->regions[regionidx];
- if ((guest_pa >= region->guest_phys_address) &&
- (guest_pa <= region->guest_phys_address_end)) {
- vhost_va = region->address_offset + guest_pa;
- break;
- }
- }
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| VVA %p\n",
- dev->device_fh, (void*)(uintptr_t)guest_pa, (void*)(uintptr_t)vhost_va);
-
- return vhost_va;
-}
-
-/*
- * Function to convert guest physical addresses to vhost physical addresses.
- * This is used to convert virtio buffer addresses.
- */
-static inline uint64_t __attribute__((always_inline))
-gpa_to_hpa(struct virtio_net *dev, uint64_t guest_pa,
- uint32_t buf_len, hpa_type *addr_type)
-{
- struct virtio_memory_regions_hpa *region;
- uint32_t regionidx;
- uint64_t vhost_pa = 0;
-
- *addr_type = PHYS_ADDR_INVALID;
-
- for (regionidx = 0; regionidx < dev->mem->nregions_hpa; regionidx++) {
- region = &dev->mem->regions_hpa[regionidx];
- if ((guest_pa >= region->guest_phys_address) &&
- (guest_pa <= region->guest_phys_address_end)) {
- vhost_pa = region->host_phys_addr_offset + guest_pa;
- if (likely((guest_pa + buf_len - 1)
- <= region->guest_phys_address_end))
- *addr_type = PHYS_ADDR_CONTINUOUS;
- else
- *addr_type = PHYS_ADDR_CROSS_SUBREG;
- break;
- }
- }
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| HPA %p\n",
- dev->device_fh, (void *)(uintptr_t)guest_pa,
- (void *)(uintptr_t)vhost_pa);
-
- return vhost_pa;
-}
-
-/*
- * This function adds buffers to the virtio devices RX virtqueue. Buffers can
- * be received from the physical port or from another virtio device. A packet
- * count is returned to indicate the number of packets that were succesfully
- * added to the RX queue. This function works when mergeable is disabled.
- */
-static inline uint32_t __attribute__((always_inline))
-virtio_dev_rx(struct virtio_net *dev, struct rte_mbuf **pkts, uint32_t count)
-{
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- struct rte_mbuf *buff;
- /* The virtio_hdr is initialised to 0. */
- struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {{0,0,0,0,0,0},0};
- uint64_t buff_addr = 0;
- uint64_t buff_hdr_addr = 0;
- uint32_t head[MAX_PKT_BURST], packet_len = 0;
- uint32_t head_idx, packet_success = 0;
- uint32_t retry = 0;
- uint16_t avail_idx, res_cur_idx;
- uint16_t res_base_idx, res_end_idx;
- uint16_t free_entries;
- uint8_t success = 0;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
- vq = dev->virtqueue[VIRTIO_RXQ];
- count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
-
- /* As many data cores may want access to available buffers, they need to be reserved. */
- do {
- res_base_idx = vq->last_used_idx_res;
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- free_entries = (avail_idx - res_base_idx);
- /* If retry is enabled and the queue is full then we wait and retry to avoid packet loss. */
- if (enable_retry && unlikely(count > free_entries)) {
- for (retry = 0; retry < burst_rx_retry_num; retry++) {
- rte_delay_us(burst_rx_delay_time);
- avail_idx =
- *((volatile uint16_t *)&vq->avail->idx);
- free_entries = (avail_idx - res_base_idx);
- if (count <= free_entries)
- break;
- }
- }
-
- /*check that we have enough buffers*/
- if (unlikely(count > free_entries))
- count = free_entries;
-
- if (count == 0)
- return 0;
-
- res_end_idx = res_base_idx + count;
- /* vq->last_used_idx_res is atomically updated. */
- success = rte_atomic16_cmpset(&vq->last_used_idx_res, res_base_idx,
- res_end_idx);
- } while (unlikely(success == 0));
- res_cur_idx = res_base_idx;
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n", dev->device_fh, res_cur_idx, res_end_idx);
-
- /* Prefetch available ring to retrieve indexes. */
- rte_prefetch0(&vq->avail->ring[res_cur_idx & (vq->size - 1)]);
-
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (head_idx = 0; head_idx < count; head_idx++)
- head[head_idx] = vq->avail->ring[(res_cur_idx + head_idx) & (vq->size - 1)];
-
- /*Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
-
- while (res_cur_idx != res_end_idx) {
- /* Get descriptor from available ring */
- desc = &vq->desc[head[packet_success]];
-
- buff = pkts[packet_success];
-
- /* Convert from gpa to vva (guest physical addr -> vhost virtual addr) */
- buff_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void*)(uintptr_t)buff_addr);
-
- /* Copy virtio_hdr to packet and increment buffer address */
- buff_hdr_addr = buff_addr;
- packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
-
- /*
- * If the descriptors are chained the header and data are
- * placed in separate buffers.
- */
- if (desc->flags & VRING_DESC_F_NEXT) {
- desc->len = vq->vhost_hlen;
- desc = &vq->desc[desc->next];
- /* Buffer address translation. */
- buff_addr = gpa_to_vva(dev, desc->addr);
- desc->len = rte_pktmbuf_data_len(buff);
- } else {
- buff_addr += vq->vhost_hlen;
- desc->len = packet_len;
- }
-
- /* Update used ring with desc information */
- vq->used->ring[res_cur_idx & (vq->size - 1)].id = head[packet_success];
- vq->used->ring[res_cur_idx & (vq->size - 1)].len = packet_len;
-
- /* Copy mbuf data to buffer */
- rte_memcpy((void *)(uintptr_t)buff_addr,
- (const void *)buff->pkt.data,
- rte_pktmbuf_data_len(buff));
- PRINT_PACKET(dev, (uintptr_t)buff_addr,
- rte_pktmbuf_data_len(buff), 0);
-
- res_cur_idx++;
- packet_success++;
-
- rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
- (const void *)&virtio_hdr, vq->vhost_hlen);
-
- PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
-
- if (res_cur_idx < res_end_idx) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- }
- }
-
- rte_compiler_barrier();
-
- /* Wait until it's our turn to add our buffer to the used ring. */
- while (unlikely(vq->last_used_idx != res_base_idx))
- rte_pause();
-
- *(volatile uint16_t *)&vq->used->idx += count;
- vq->last_used_idx = res_end_idx;
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
- return count;
-}
-
-static inline uint32_t __attribute__((always_inline))
-copy_from_mbuf_to_vring(struct virtio_net *dev,
- uint16_t res_base_idx, uint16_t res_end_idx,
- struct rte_mbuf *pkt)
-{
- uint32_t vec_idx = 0;
- uint32_t entry_success = 0;
- struct vhost_virtqueue *vq;
- /* The virtio_hdr is initialised to 0. */
- struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {
- {0, 0, 0, 0, 0, 0}, 0};
- uint16_t cur_idx = res_base_idx;
- uint64_t vb_addr = 0;
- uint64_t vb_hdr_addr = 0;
- uint32_t seg_offset = 0;
- uint32_t vb_offset = 0;
- uint32_t seg_avail;
- uint32_t vb_avail;
- uint32_t cpy_len, entry_len;
-
- if (pkt == NULL)
- return 0;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| "
- "End Index %d\n",
- dev->device_fh, cur_idx, res_end_idx);
-
- /*
- * Convert from gpa to vva
- * (guest physical addr -> vhost virtual addr)
- */
- vq = dev->virtqueue[VIRTIO_RXQ];
- vb_addr =
- gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
- vb_hdr_addr = vb_addr;
-
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
-
- virtio_hdr.num_buffers = res_end_idx - res_base_idx;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") RX: Num merge buffers %d\n",
- dev->device_fh, virtio_hdr.num_buffers);
-
- rte_memcpy((void *)(uintptr_t)vb_hdr_addr,
- (const void *)&virtio_hdr, vq->vhost_hlen);
-
- PRINT_PACKET(dev, (uintptr_t)vb_hdr_addr, vq->vhost_hlen, 1);
-
- seg_avail = rte_pktmbuf_data_len(pkt);
- vb_offset = vq->vhost_hlen;
- vb_avail =
- vq->buf_vec[vec_idx].buf_len - vq->vhost_hlen;
-
- entry_len = vq->vhost_hlen;
-
- if (vb_avail == 0) {
- uint32_t desc_idx =
- vq->buf_vec[vec_idx].desc_idx;
- vq->desc[desc_idx].len = vq->vhost_hlen;
-
- if ((vq->desc[desc_idx].flags
- & VRING_DESC_F_NEXT) == 0) {
- /* Update used ring with desc information */
- vq->used->ring[cur_idx & (vq->size - 1)].id
- = vq->buf_vec[vec_idx].desc_idx;
- vq->used->ring[cur_idx & (vq->size - 1)].len
- = entry_len;
-
- entry_len = 0;
- cur_idx++;
- entry_success++;
- }
-
- vec_idx++;
- vb_addr =
- gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
-
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
- vb_offset = 0;
- vb_avail = vq->buf_vec[vec_idx].buf_len;
- }
-
- cpy_len = RTE_MIN(vb_avail, seg_avail);
-
- while (cpy_len > 0) {
- /* Copy mbuf data to vring buffer */
- rte_memcpy((void *)(uintptr_t)(vb_addr + vb_offset),
- (const void *)(rte_pktmbuf_mtod(pkt, char*) + seg_offset),
- cpy_len);
-
- PRINT_PACKET(dev,
- (uintptr_t)(vb_addr + vb_offset),
- cpy_len, 0);
-
- seg_offset += cpy_len;
- vb_offset += cpy_len;
- seg_avail -= cpy_len;
- vb_avail -= cpy_len;
- entry_len += cpy_len;
-
- if (seg_avail != 0) {
- /*
- * The virtio buffer in this vring
- * entry reach to its end.
- * But the segment doesn't complete.
- */
- if ((vq->desc[vq->buf_vec[vec_idx].desc_idx].flags &
- VRING_DESC_F_NEXT) == 0) {
- /* Update used ring with desc information */
- vq->used->ring[cur_idx & (vq->size - 1)].id
- = vq->buf_vec[vec_idx].desc_idx;
- vq->used->ring[cur_idx & (vq->size - 1)].len
- = entry_len;
- entry_len = 0;
- cur_idx++;
- entry_success++;
- }
-
- vec_idx++;
- vb_addr = gpa_to_vva(dev,
- vq->buf_vec[vec_idx].buf_addr);
- vb_offset = 0;
- vb_avail = vq->buf_vec[vec_idx].buf_len;
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- } else {
- /*
- * This current segment complete, need continue to
- * check if the whole packet complete or not.
- */
- pkt = pkt->pkt.next;
- if (pkt != NULL) {
- /*
- * There are more segments.
- */
- if (vb_avail == 0) {
- /*
- * This current buffer from vring is
- * used up, need fetch next buffer
- * from buf_vec.
- */
- uint32_t desc_idx =
- vq->buf_vec[vec_idx].desc_idx;
- vq->desc[desc_idx].len = vb_offset;
-
- if ((vq->desc[desc_idx].flags &
- VRING_DESC_F_NEXT) == 0) {
- uint16_t wrapped_idx =
- cur_idx & (vq->size - 1);
- /*
- * Update used ring with the
- * descriptor information
- */
- vq->used->ring[wrapped_idx].id
- = desc_idx;
- vq->used->ring[wrapped_idx].len
- = entry_len;
- entry_success++;
- entry_len = 0;
- cur_idx++;
- }
-
- /* Get next buffer from buf_vec. */
- vec_idx++;
- vb_addr = gpa_to_vva(dev,
- vq->buf_vec[vec_idx].buf_addr);
- vb_avail =
- vq->buf_vec[vec_idx].buf_len;
- vb_offset = 0;
- }
-
- seg_offset = 0;
- seg_avail = rte_pktmbuf_data_len(pkt);
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- } else {
- /*
- * This whole packet completes.
- */
- uint32_t desc_idx =
- vq->buf_vec[vec_idx].desc_idx;
- vq->desc[desc_idx].len = vb_offset;
-
- while (vq->desc[desc_idx].flags &
- VRING_DESC_F_NEXT) {
- desc_idx = vq->desc[desc_idx].next;
- vq->desc[desc_idx].len = 0;
- }
-
- /* Update used ring with desc information */
- vq->used->ring[cur_idx & (vq->size - 1)].id
- = vq->buf_vec[vec_idx].desc_idx;
- vq->used->ring[cur_idx & (vq->size - 1)].len
- = entry_len;
- entry_len = 0;
- cur_idx++;
- entry_success++;
- seg_avail = 0;
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- }
- }
- }
-
- return entry_success;
-}
-
-/*
- * This function adds buffers to the virtio devices RX virtqueue. Buffers can
- * be received from the physical port or from another virtio device. A packet
- * count is returned to indicate the number of packets that were succesfully
- * added to the RX queue. This function works for mergeable RX.
- */
-static inline uint32_t __attribute__((always_inline))
-virtio_dev_merge_rx(struct virtio_net *dev, struct rte_mbuf **pkts,
- uint32_t count)
-{
- struct vhost_virtqueue *vq;
- uint32_t pkt_idx = 0, entry_success = 0;
- uint32_t retry = 0;
- uint16_t avail_idx, res_cur_idx;
- uint16_t res_base_idx, res_end_idx;
- uint8_t success = 0;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_rx()\n",
- dev->device_fh);
- vq = dev->virtqueue[VIRTIO_RXQ];
- count = RTE_MIN((uint32_t)MAX_PKT_BURST, count);
-
- if (count == 0)
- return 0;
-
- for (pkt_idx = 0; pkt_idx < count; pkt_idx++) {
- uint32_t secure_len = 0;
- uint16_t need_cnt;
- uint32_t vec_idx = 0;
- uint32_t pkt_len = pkts[pkt_idx]->pkt.pkt_len + vq->vhost_hlen;
- uint16_t i, id;
-
- do {
- /*
- * As many data cores may want access to available
- * buffers, they need to be reserved.
- */
- res_base_idx = vq->last_used_idx_res;
- res_cur_idx = res_base_idx;
-
- do {
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- if (unlikely(res_cur_idx == avail_idx)) {
- /*
- * If retry is enabled and the queue is
- * full then we wait and retry to avoid
- * packet loss.
- */
- if (enable_retry) {
- uint8_t cont = 0;
- for (retry = 0; retry < burst_rx_retry_num; retry++) {
- rte_delay_us(burst_rx_delay_time);
- avail_idx =
- *((volatile uint16_t *)&vq->avail->idx);
- if (likely(res_cur_idx != avail_idx)) {
- cont = 1;
- break;
- }
- }
- if (cont == 1)
- continue;
- }
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") Failed "
- "to get enough desc from "
- "vring\n",
- dev->device_fh);
- return pkt_idx;
- } else {
- uint16_t wrapped_idx =
- (res_cur_idx) & (vq->size - 1);
- uint32_t idx =
- vq->avail->ring[wrapped_idx];
- uint8_t next_desc;
-
- do {
- next_desc = 0;
- secure_len += vq->desc[idx].len;
- if (vq->desc[idx].flags &
- VRING_DESC_F_NEXT) {
- idx = vq->desc[idx].next;
- next_desc = 1;
- }
- } while (next_desc);
-
- res_cur_idx++;
- }
- } while (pkt_len > secure_len);
-
- /* vq->last_used_idx_res is atomically updated. */
- success = rte_atomic16_cmpset(&vq->last_used_idx_res,
- res_base_idx,
- res_cur_idx);
- } while (success == 0);
-
- id = res_base_idx;
- need_cnt = res_cur_idx - res_base_idx;
-
- for (i = 0; i < need_cnt; i++, id++) {
- uint16_t wrapped_idx = id & (vq->size - 1);
- uint32_t idx = vq->avail->ring[wrapped_idx];
- uint8_t next_desc;
- do {
- next_desc = 0;
- vq->buf_vec[vec_idx].buf_addr =
- vq->desc[idx].addr;
- vq->buf_vec[vec_idx].buf_len =
- vq->desc[idx].len;
- vq->buf_vec[vec_idx].desc_idx = idx;
- vec_idx++;
-
- if (vq->desc[idx].flags & VRING_DESC_F_NEXT) {
- idx = vq->desc[idx].next;
- next_desc = 1;
- }
- } while (next_desc);
- }
-
- res_end_idx = res_cur_idx;
-
- entry_success = copy_from_mbuf_to_vring(dev, res_base_idx,
- res_end_idx, pkts[pkt_idx]);
-
- rte_compiler_barrier();
-
- /*
- * Wait until it's our turn to add our buffer
- * to the used ring.
- */
- while (unlikely(vq->last_used_idx != res_base_idx))
- rte_pause();
-
- *(volatile uint16_t *)&vq->used->idx += entry_success;
- vq->last_used_idx = res_end_idx;
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
- }
-
- return count;
-}
-
-/*
- * Compares a packet destination MAC address to a device MAC address.
- */
-static inline int __attribute__((always_inline))
-ether_addr_cmp(struct ether_addr *ea, struct ether_addr *eb)
-{
- return (((*(uint64_t *)ea ^ *(uint64_t *)eb) & MAC_ADDR_CMP) == 0);
-}
-
-/*
- * This function learns the MAC address of the device and registers this along with a
- * vlan tag to a VMDQ.
- */
-static int
-link_vmdq(struct virtio_net *dev, struct rte_mbuf *m)
-{
- struct ether_hdr *pkt_hdr;
- struct virtio_net_data_ll *dev_ll;
- int i, ret;
-
- /* Learn MAC address of guest device from packet */
- pkt_hdr = (struct ether_hdr *)m->pkt.data;
-
- dev_ll = ll_root_used;
-
- while (dev_ll != NULL) {
- if (ether_addr_cmp(&(pkt_hdr->s_addr), &dev_ll->dev->mac_address)) {
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") WARNING: This device is using an existing MAC address and has not been registered.\n", dev->device_fh);
- return -1;
- }
- dev_ll = dev_ll->next;
- }
-
- for (i = 0; i < ETHER_ADDR_LEN; i++)
- dev->mac_address.addr_bytes[i] = pkt_hdr->s_addr.addr_bytes[i];
-
- /* vlan_tag currently uses the device_id. */
- dev->vlan_tag = vlan_tags[dev->device_fh];
-
- /* Print out VMDQ registration info. */
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") MAC_ADDRESS %02x:%02x:%02x:%02x:%02x:%02x and VLAN_TAG %d registered\n",
- dev->device_fh,
- dev->mac_address.addr_bytes[0], dev->mac_address.addr_bytes[1],
- dev->mac_address.addr_bytes[2], dev->mac_address.addr_bytes[3],
- dev->mac_address.addr_bytes[4], dev->mac_address.addr_bytes[5],
- dev->vlan_tag);
-
- /* Register the MAC address. */
- ret = rte_eth_dev_mac_addr_add(ports[0], &dev->mac_address, (uint32_t)dev->device_fh);
- if (ret)
- RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Failed to add device MAC address to VMDQ\n",
- dev->device_fh);
-
- /* Enable stripping of the vlan tag as we handle routing. */
- rte_eth_dev_set_vlan_strip_on_queue(ports[0], (uint16_t)dev->vmdq_rx_q, 1);
-
- /* Set device as ready for RX. */
- dev->ready = DEVICE_RX;
-
- return 0;
-}
-
-/*
- * Removes MAC address and vlan tag from VMDQ. Ensures that nothing is adding buffers to the RX
- * queue before disabling RX on the device.
- */
-static inline void
-unlink_vmdq(struct virtio_net *dev)
-{
- unsigned i = 0;
- unsigned rx_count;
- struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
-
- if (dev->ready == DEVICE_RX) {
- /*clear MAC and VLAN settings*/
- rte_eth_dev_mac_addr_remove(ports[0], &dev->mac_address);
- for (i = 0; i < 6; i++)
- dev->mac_address.addr_bytes[i] = 0;
-
- dev->vlan_tag = 0;
-
- /*Clear out the receive buffers*/
- rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
-
- while (rx_count) {
- for (i = 0; i < rx_count; i++)
- rte_pktmbuf_free(pkts_burst[i]);
-
- rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
- }
-
- dev->ready = DEVICE_MAC_LEARNING;
- }
-}
-
-/*
- * Check if the packet destination MAC address is for a local device. If so then put
- * the packet on that devices RX queue. If not then return.
- */
-static inline unsigned __attribute__((always_inline))
-virtio_tx_local(struct virtio_net *dev, struct rte_mbuf *m)
-{
- struct virtio_net_data_ll *dev_ll;
- struct ether_hdr *pkt_hdr;
- uint64_t ret = 0;
-
- pkt_hdr = (struct ether_hdr *)m->pkt.data;
-
- /*get the used devices list*/
- dev_ll = ll_root_used;
-
- while (dev_ll != NULL) {
- if ((dev_ll->dev->ready == DEVICE_RX) && ether_addr_cmp(&(pkt_hdr->d_addr),
- &dev_ll->dev->mac_address)) {
-
- /* Drop the packet if the TX packet is destined for the TX device. */
- if (dev_ll->dev->device_fh == dev->device_fh) {
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: Source and destination MAC addresses are the same. Dropping packet.\n",
- dev_ll->dev->device_fh);
- return 0;
- }
-
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is local\n", dev_ll->dev->device_fh);
-
- if (dev_ll->dev->remove) {
- /*drop the packet if the device is marked for removal*/
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Device is marked for removal\n", dev_ll->dev->device_fh);
- } else {
- uint32_t mergeable =
- dev_ll->dev->features &
- (1 << VIRTIO_NET_F_MRG_RXBUF);
-
- /*send the packet to the local virtio device*/
- if (likely(mergeable == 0))
- ret = virtio_dev_rx(dev_ll->dev, &m, 1);
- else
- ret = virtio_dev_merge_rx(dev_ll->dev,
- &m, 1);
-
- if (enable_stats) {
- rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_total_atomic,
- 1);
- rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_atomic,
- ret);
- dev_statistics[dev->device_fh].tx_total++;
- dev_statistics[dev->device_fh].tx += ret;
- }
- }
-
- return 0;
- }
- dev_ll = dev_ll->next;
- }
-
- return -1;
-}
-
-/*
- * This function routes the TX packet to the correct interface. This may be a local device
- * or the physical port.
- */
-static inline void __attribute__((always_inline))
-virtio_tx_route(struct virtio_net* dev, struct rte_mbuf *m, struct rte_mempool *mbuf_pool, uint16_t vlan_tag)
-{
- struct mbuf_table *tx_q;
- struct vlan_ethhdr *vlan_hdr;
- struct rte_mbuf **m_table;
- struct rte_mbuf *mbuf, *prev;
- unsigned len, ret, offset = 0;
- const uint16_t lcore_id = rte_lcore_id();
- struct virtio_net_data_ll *dev_ll = ll_root_used;
- struct ether_hdr *pkt_hdr = (struct ether_hdr *)m->pkt.data;
-
- /*check if destination is local VM*/
- if ((vm2vm_mode == VM2VM_SOFTWARE) && (virtio_tx_local(dev, m) == 0))
- return;
-
- if (vm2vm_mode == VM2VM_HARDWARE) {
- while (dev_ll != NULL) {
- if ((dev_ll->dev->ready == DEVICE_RX)
- && ether_addr_cmp(&(pkt_hdr->d_addr),
- &dev_ll->dev->mac_address)) {
- /*
- * Drop the packet if the TX packet is
- * destined for the TX device.
- */
- if (dev_ll->dev->device_fh == dev->device_fh) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") TX: Source and destination"
- " MAC addresses are the same. Dropping "
- "packet.\n",
- dev_ll->dev->device_fh);
- return;
- }
- offset = 4;
- vlan_tag =
- (uint16_t)
- vlan_tags[(uint16_t)dev_ll->dev->device_fh];
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") TX: pkt to local VM device id:"
- "(%"PRIu64") vlan tag: %d.\n",
- dev->device_fh, dev_ll->dev->device_fh,
- vlan_tag);
-
- break;
- }
- dev_ll = dev_ll->next;
- }
- }
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is external\n", dev->device_fh);
-
- /*Add packet to the port tx queue*/
- tx_q = &lcore_tx_queue[lcore_id];
- len = tx_q->len;
-
- /* Allocate an mbuf and populate the structure. */
- mbuf = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(mbuf == NULL)) {
- RTE_LOG(ERR, VHOST_DATA,
- "Failed to allocate memory for mbuf.\n");
- return;
- }
-
- mbuf->pkt.data_len = m->pkt.data_len + VLAN_HLEN + offset;
- mbuf->pkt.pkt_len = m->pkt.pkt_len + VLAN_HLEN + offset;
- mbuf->pkt.nb_segs = m->pkt.nb_segs;
-
- /* Copy ethernet header to mbuf. */
- rte_memcpy((void*)mbuf->pkt.data, (const void*)m->pkt.data, ETH_HLEN);
-
-
- /* Setup vlan header. Bytes need to be re-ordered for network with htons()*/
- vlan_hdr = (struct vlan_ethhdr *) mbuf->pkt.data;
- vlan_hdr->h_vlan_encapsulated_proto = vlan_hdr->h_vlan_proto;
- vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q);
- vlan_hdr->h_vlan_TCI = htons(vlan_tag);
-
- /* Copy the remaining packet contents to the mbuf. */
- rte_memcpy((void*) ((uint8_t*)mbuf->pkt.data + VLAN_ETH_HLEN),
- (const void*) ((uint8_t*)m->pkt.data + ETH_HLEN), (m->pkt.data_len - ETH_HLEN));
-
- /* Copy the remaining segments for the whole packet. */
- prev = mbuf;
- while (m->pkt.next) {
- /* Allocate an mbuf and populate the structure. */
- struct rte_mbuf *next_mbuf = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(next_mbuf == NULL)) {
- rte_pktmbuf_free(mbuf);
- RTE_LOG(ERR, VHOST_DATA,
- "Failed to allocate memory for mbuf.\n");
- return;
- }
-
- m = m->pkt.next;
- prev->pkt.next = next_mbuf;
- prev = next_mbuf;
- next_mbuf->pkt.data_len = m->pkt.data_len;
-
- /* Copy data to next mbuf. */
- rte_memcpy(rte_pktmbuf_mtod(next_mbuf, void *),
- rte_pktmbuf_mtod(m, const void *), m->pkt.data_len);
- }
-
- tx_q->m_table[len] = mbuf;
- len++;
- if (enable_stats) {
- dev_statistics[dev->device_fh].tx_total++;
- dev_statistics[dev->device_fh].tx++;
- }
-
- if (unlikely(len == MAX_PKT_BURST)) {
- m_table = (struct rte_mbuf **)tx_q->m_table;
- ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id, m_table, (uint16_t) len);
- /* Free any buffers not handled by TX and update the port stats. */
- if (unlikely(ret < len)) {
- do {
- rte_pktmbuf_free(m_table[ret]);
- } while (++ret < len);
- }
-
- len = 0;
- }
-
- tx_q->len = len;
- return;
-}
-
-static inline void __attribute__((always_inline))
-virtio_dev_tx(struct virtio_net* dev, struct rte_mempool *mbuf_pool)
-{
- struct rte_mbuf m;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- uint64_t buff_addr = 0;
- uint32_t head[MAX_PKT_BURST];
- uint32_t used_idx;
- uint32_t i;
- uint16_t free_entries, packet_success = 0;
- uint16_t avail_idx;
-
- vq = dev->virtqueue[VIRTIO_TXQ];
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- /* If there are no available buffers then return. */
- if (vq->last_used_idx == avail_idx)
- return;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
-
- /* Prefetch available ring to retrieve head indexes. */
- rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
-
- /*get the number of free entries in the ring*/
- free_entries = (avail_idx - vq->last_used_idx);
-
- /* Limit to MAX_PKT_BURST. */
- if (free_entries > MAX_PKT_BURST)
- free_entries = MAX_PKT_BURST;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n", dev->device_fh, free_entries);
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (i = 0; i < free_entries; i++)
- head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)];
-
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
-
- while (packet_success < free_entries) {
- desc = &vq->desc[head[packet_success]];
-
- /* Discard first buffer as it is the virtio header */
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- buff_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void*)(uintptr_t)buff_addr);
-
- used_idx = vq->last_used_idx & (vq->size - 1);
-
- if (packet_success < (free_entries - 1)) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success+1]]);
- rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]);
- }
-
- /* Update used index buffer information. */
- vq->used->ring[used_idx].id = head[packet_success];
- vq->used->ring[used_idx].len = 0;
-
- /* Setup dummy mbuf. This is copied to a real mbuf if transmitted out the physical port. */
- m.pkt.data_len = desc->len;
- m.pkt.pkt_len = desc->len;
- m.pkt.data = (void*)(uintptr_t)buff_addr;
-
- PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
-
- /* If this is the first received packet we need to learn the MAC and setup VMDQ */
- if (dev->ready == DEVICE_MAC_LEARNING) {
- if (dev->remove || (link_vmdq(dev, &m) == -1)) {
- /*discard frame if device is scheduled for removal or a duplicate MAC address is found. */
- packet_success += free_entries;
- vq->last_used_idx += packet_success;
- break;
- }
- }
- virtio_tx_route(dev, &m, mbuf_pool, (uint16_t)dev->device_fh);
-
- vq->last_used_idx++;
- packet_success++;
- }
-
- rte_compiler_barrier();
- vq->used->idx += packet_success;
- /* Kick guest if required. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-}
-
-/* This function works for TX packets with mergeable feature enabled. */
-static inline void __attribute__((always_inline))
-virtio_dev_merge_tx(struct virtio_net *dev, struct rte_mempool *mbuf_pool)
-{
- struct rte_mbuf *m, *prev;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- uint64_t vb_addr = 0;
- uint32_t head[MAX_PKT_BURST];
- uint32_t used_idx;
- uint32_t i;
- uint16_t free_entries, entry_success = 0;
- uint16_t avail_idx;
- uint32_t buf_size = MBUF_SIZE - (sizeof(struct rte_mbuf)
- + RTE_PKTMBUF_HEADROOM);
-
- vq = dev->virtqueue[VIRTIO_TXQ];
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- /* If there are no available buffers then return. */
- if (vq->last_used_idx == avail_idx)
- return;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_tx()\n",
- dev->device_fh);
-
- /* Prefetch available ring to retrieve head indexes. */
- rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
-
- /*get the number of free entries in the ring*/
- free_entries = (avail_idx - vq->last_used_idx);
-
- /* Limit to MAX_PKT_BURST. */
- free_entries = RTE_MIN(free_entries, MAX_PKT_BURST);
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n",
- dev->device_fh, free_entries);
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (i = 0; i < free_entries; i++)
- head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)];
-
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[entry_success]]);
- rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
-
- while (entry_success < free_entries) {
- uint32_t vb_avail, vb_offset;
- uint32_t seg_avail, seg_offset;
- uint32_t cpy_len;
- uint32_t seg_num = 0;
- struct rte_mbuf *cur;
- uint8_t alloc_err = 0;
-
- desc = &vq->desc[head[entry_success]];
-
- /* Discard first buffer as it is the virtio header */
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- vb_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
-
- used_idx = vq->last_used_idx & (vq->size - 1);
-
- if (entry_success < (free_entries - 1)) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[entry_success+1]]);
- rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]);
- }
-
- /* Update used index buffer information. */
- vq->used->ring[used_idx].id = head[entry_success];
- vq->used->ring[used_idx].len = 0;
-
- vb_offset = 0;
- vb_avail = desc->len;
- seg_offset = 0;
- seg_avail = buf_size;
- cpy_len = RTE_MIN(vb_avail, seg_avail);
-
- PRINT_PACKET(dev, (uintptr_t)vb_addr, desc->len, 0);
-
- /* Allocate an mbuf and populate the structure. */
- m = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(m == NULL)) {
- RTE_LOG(ERR, VHOST_DATA,
- "Failed to allocate memory for mbuf.\n");
- return;
- }
-
- seg_num++;
- cur = m;
- prev = m;
- while (cpy_len != 0) {
- rte_memcpy((void *)(rte_pktmbuf_mtod(cur, char *) + seg_offset),
- (void *)((uintptr_t)(vb_addr + vb_offset)),
- cpy_len);
-
- seg_offset += cpy_len;
- vb_offset += cpy_len;
- vb_avail -= cpy_len;
- seg_avail -= cpy_len;
-
- if (vb_avail != 0) {
- /*
- * The segment reachs to its end,
- * while the virtio buffer in TX vring has
- * more data to be copied.
- */
- cur->pkt.data_len = seg_offset;
- m->pkt.pkt_len += seg_offset;
- /* Allocate mbuf and populate the structure. */
- cur = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(cur == NULL)) {
- RTE_LOG(ERR, VHOST_DATA, "Failed to "
- "allocate memory for mbuf.\n");
- rte_pktmbuf_free(m);
- alloc_err = 1;
- break;
- }
-
- seg_num++;
- prev->pkt.next = cur;
- prev = cur;
- seg_offset = 0;
- seg_avail = buf_size;
- } else {
- if (desc->flags & VRING_DESC_F_NEXT) {
- /*
- * There are more virtio buffers in
- * same vring entry need to be copied.
- */
- if (seg_avail == 0) {
- /*
- * The current segment hasn't
- * room to accomodate more
- * data.
- */
- cur->pkt.data_len = seg_offset;
- m->pkt.pkt_len += seg_offset;
- /*
- * Allocate an mbuf and
- * populate the structure.
- */
- cur = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(cur == NULL)) {
- RTE_LOG(ERR,
- VHOST_DATA,
- "Failed to "
- "allocate memory "
- "for mbuf\n");
- rte_pktmbuf_free(m);
- alloc_err = 1;
- break;
- }
- seg_num++;
- prev->pkt.next = cur;
- prev = cur;
- seg_offset = 0;
- seg_avail = buf_size;
- }
-
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- vb_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
- vb_offset = 0;
- vb_avail = desc->len;
-
- PRINT_PACKET(dev, (uintptr_t)vb_addr,
- desc->len, 0);
- } else {
- /* The whole packet completes. */
- cur->pkt.data_len = seg_offset;
- m->pkt.pkt_len += seg_offset;
- vb_avail = 0;
- }
- }
-
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- }
-
- if (unlikely(alloc_err == 1))
- break;
-
- m->pkt.nb_segs = seg_num;
-
- /*
- * If this is the first received packet we need to learn
- * the MAC and setup VMDQ
- */
- if (dev->ready == DEVICE_MAC_LEARNING) {
- if (dev->remove || (link_vmdq(dev, m) == -1)) {
- /*
- * Discard frame if device is scheduled for
- * removal or a duplicate MAC address is found.
- */
- entry_success = free_entries;
- vq->last_used_idx += entry_success;
- rte_pktmbuf_free(m);
- break;
- }
- }
-
- virtio_tx_route(dev, m, mbuf_pool, (uint16_t)dev->device_fh);
- vq->last_used_idx++;
- entry_success++;
- rte_pktmbuf_free(m);
- }
-
- rte_compiler_barrier();
- vq->used->idx += entry_success;
- /* Kick guest if required. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-
-}
-
-/*
- * This function is called by each data core. It handles all RX/TX registered with the
- * core. For TX the specific lcore linked list is used. For RX, MAC addresses are compared
- * with all devices in the main linked list.
- */
-static int
-switch_worker(__attribute__((unused)) void *arg)
-{
- struct rte_mempool *mbuf_pool = arg;
- struct virtio_net *dev = NULL;
- struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
- struct virtio_net_data_ll *dev_ll;
- struct mbuf_table *tx_q;
- volatile struct lcore_ll_info *lcore_ll;
- const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
- uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
- unsigned ret, i;
- const uint16_t lcore_id = rte_lcore_id();
- const uint16_t num_cores = (uint16_t)rte_lcore_count();
- uint16_t rx_count = 0;
- uint32_t mergeable = 0;
-
- RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
- lcore_ll = lcore_info[lcore_id].lcore_ll;
- prev_tsc = 0;
-
- tx_q = &lcore_tx_queue[lcore_id];
- for (i = 0; i < num_cores; i ++) {
- if (lcore_ids[i] == lcore_id) {
- tx_q->txq_id = i;
- break;
- }
- }
-
- while(1) {
- cur_tsc = rte_rdtsc();
- /*
- * TX burst queue drain
- */
- diff_tsc = cur_tsc - prev_tsc;
- if (unlikely(diff_tsc > drain_tsc)) {
-
- if (tx_q->len) {
- LOG_DEBUG(VHOST_DATA, "TX queue drained after timeout with burst size %u \n", tx_q->len);
-
- /*Tx any packets in the queue*/
- ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id,
- (struct rte_mbuf **)tx_q->m_table,
- (uint16_t)tx_q->len);
- if (unlikely(ret < tx_q->len)) {
- do {
- rte_pktmbuf_free(tx_q->m_table[ret]);
- } while (++ret < tx_q->len);
- }
-
- tx_q->len = 0;
- }
-
- prev_tsc = cur_tsc;
-
- }
-
- rte_prefetch0(lcore_ll->ll_root_used);
- /*
- * Inform the configuration core that we have exited the linked list and that no devices are
- * in use if requested.
- */
- if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
- lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
-
- /*
- * Process devices
- */
- dev_ll = lcore_ll->ll_root_used;
-
- while (dev_ll != NULL) {
- /*get virtio device ID*/
- dev = dev_ll->dev;
- mergeable =
- dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF);
-
- if (dev->remove) {
- dev_ll = dev_ll->next;
- unlink_vmdq(dev);
- dev->ready = DEVICE_SAFE_REMOVE;
- continue;
- }
- if (likely(dev->ready == DEVICE_RX)) {
- /*Handle guest RX*/
- rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
-
- if (rx_count) {
- if (likely(mergeable == 0))
- ret_count =
- virtio_dev_rx(dev,
- pkts_burst, rx_count);
- else
- ret_count =
- virtio_dev_merge_rx(dev,
- pkts_burst, rx_count);
-
- if (enable_stats) {
- rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_total_atomic,
- rx_count);
- rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_atomic, ret_count);
- }
- while (likely(rx_count)) {
- rx_count--;
- rte_pktmbuf_free(pkts_burst[rx_count]);
- }
-
- }
- }
-
- if (!dev->remove) {
- /*Handle guest TX*/
- if (likely(mergeable == 0))
- virtio_dev_tx(dev, mbuf_pool);
- else
- virtio_dev_merge_tx(dev, mbuf_pool);
- }
-
- /*move to the next device in the list*/
- dev_ll = dev_ll->next;
- }
- }
-
- return 0;
-}
-
-/*
- * This function gets available ring number for zero copy rx.
- * Only one thread will call this funciton for a paticular virtio device,
- * so, it is designed as non-thread-safe function.
- */
-static inline uint32_t __attribute__((always_inline))
-get_available_ring_num_zcp(struct virtio_net *dev)
-{
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ];
- uint16_t avail_idx;
-
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- return (uint32_t)(avail_idx - vq->last_used_idx_res);
-}
-
-/*
- * This function gets available ring index for zero copy rx,
- * it will retry 'burst_rx_retry_num' times till it get enough ring index.
- * Only one thread will call this funciton for a paticular virtio device,
- * so, it is designed as non-thread-safe function.
- */
-static inline uint32_t __attribute__((always_inline))
-get_available_ring_index_zcp(struct virtio_net *dev,
- uint16_t *res_base_idx, uint32_t count)
-{
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ];
- uint16_t avail_idx;
- uint32_t retry = 0;
- uint16_t free_entries;
-
- *res_base_idx = vq->last_used_idx_res;
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- free_entries = (avail_idx - *res_base_idx);
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") in get_available_ring_index_zcp: "
- "avail idx: %d, "
- "res base idx:%d, free entries:%d\n",
- dev->device_fh, avail_idx, *res_base_idx,
- free_entries);
-
- /*
- * If retry is enabled and the queue is full then we wait
- * and retry to avoid packet loss.
- */
- if (enable_retry && unlikely(count > free_entries)) {
- for (retry = 0; retry < burst_rx_retry_num; retry++) {
- rte_delay_us(burst_rx_delay_time);
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- free_entries = (avail_idx - *res_base_idx);
- if (count <= free_entries)
- break;
- }
- }
-
- /*check that we have enough buffers*/
- if (unlikely(count > free_entries))
- count = free_entries;
-
- if (unlikely(count == 0)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") Fail in get_available_ring_index_zcp: "
- "avail idx: %d, res base idx:%d, free entries:%d\n",
- dev->device_fh, avail_idx,
- *res_base_idx, free_entries);
- return 0;
- }
-
- vq->last_used_idx_res = *res_base_idx + count;
-
- return count;
-}
-
-/*
- * This function put descriptor back to used list.
- */
-static inline void __attribute__((always_inline))
-put_desc_to_used_list_zcp(struct vhost_virtqueue *vq, uint16_t desc_idx)
-{
- uint16_t res_cur_idx = vq->last_used_idx;
- vq->used->ring[res_cur_idx & (vq->size - 1)].id = (uint32_t)desc_idx;
- vq->used->ring[res_cur_idx & (vq->size - 1)].len = 0;
- rte_compiler_barrier();
- *(volatile uint16_t *)&vq->used->idx += 1;
- vq->last_used_idx += 1;
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-}
-
-/*
- * This function get available descriptor from vitio vring and un-attached mbuf
- * from vpool->ring, and then attach them together. It needs adjust the offset
- * for buff_addr and phys_addr accroding to PMD implementation, otherwise the
- * frame data may be put to wrong location in mbuf.
- */
-static inline void __attribute__((always_inline))
-attach_rxmbuf_zcp(struct virtio_net *dev)
-{
- uint16_t res_base_idx, desc_idx;
- uint64_t buff_addr, phys_addr;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- struct rte_mbuf *mbuf = NULL;
- struct vpool *vpool;
- hpa_type addr_type;
-
- vpool = &vpool_array[dev->vmdq_rx_q];
- vq = dev->virtqueue[VIRTIO_RXQ];
-
- do {
- if (unlikely(get_available_ring_index_zcp(dev, &res_base_idx,
- 1) != 1))
- return;
- desc_idx = vq->avail->ring[(res_base_idx) & (vq->size - 1)];
-
- desc = &vq->desc[desc_idx];
- if (desc->flags & VRING_DESC_F_NEXT) {
- desc = &vq->desc[desc->next];
- buff_addr = gpa_to_vva(dev, desc->addr);
- phys_addr = gpa_to_hpa(dev, desc->addr, desc->len,
- &addr_type);
- } else {
- buff_addr = gpa_to_vva(dev,
- desc->addr + vq->vhost_hlen);
- phys_addr = gpa_to_hpa(dev,
- desc->addr + vq->vhost_hlen,
- desc->len, &addr_type);
- }
-
- if (unlikely(addr_type == PHYS_ADDR_INVALID)) {
- RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Invalid frame buffer"
- " address found when attaching RX frame buffer"
- " address!\n", dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- continue;
- }
-
- /*
- * Check if the frame buffer address from guest crosses
- * sub-region or not.
- */
- if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) {
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Frame buffer address cross "
- "sub-regioin found when attaching RX frame "
- "buffer address!\n",
- dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- continue;
- }
- } while (unlikely(phys_addr == 0));
-
- rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf);
- if (unlikely(mbuf == NULL)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in attach_rxmbuf_zcp: "
- "ring_sc_dequeue fail.\n",
- dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- return;
- }
-
- if (unlikely(vpool->buf_size > desc->len)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in attach_rxmbuf_zcp: frame buffer "
- "length(%d) of descriptor idx: %d less than room "
- "size required: %d\n",
- dev->device_fh, desc->len, desc_idx, vpool->buf_size);
- put_desc_to_used_list_zcp(vq, desc_idx);
- rte_ring_sp_enqueue(vpool->ring, (void *)mbuf);
- return;
- }
-
- mbuf->buf_addr = (void *)(uintptr_t)(buff_addr - RTE_PKTMBUF_HEADROOM);
- mbuf->pkt.data = (void *)(uintptr_t)(buff_addr);
- mbuf->buf_physaddr = phys_addr - RTE_PKTMBUF_HEADROOM;
- mbuf->pkt.data_len = desc->len;
- MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in attach_rxmbuf_zcp: res base idx:%d, "
- "descriptor idx:%d\n",
- dev->device_fh, res_base_idx, desc_idx);
-
- __rte_mbuf_raw_free(mbuf);
-
- return;
-}
-
-/*
- * Detach an attched packet mbuf -
- * - restore original mbuf address and length values.
- * - reset pktmbuf data and data_len to their default values.
- * All other fields of the given packet mbuf will be left intact.
- *
- * @param m
- * The attached packet mbuf.
- */
-static inline void pktmbuf_detach_zcp(struct rte_mbuf *m)
-{
- const struct rte_mempool *mp = m->pool;
- void *buf = RTE_MBUF_TO_BADDR(m);
- uint32_t buf_ofs;
- uint32_t buf_len = mp->elt_size - sizeof(*m);
- m->buf_physaddr = rte_mempool_virt2phy(mp, m) + sizeof(*m);
-
- m->buf_addr = buf;
- m->buf_len = (uint16_t)buf_len;
-
- buf_ofs = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
- RTE_PKTMBUF_HEADROOM : m->buf_len;
- m->pkt.data = (char *) m->buf_addr + buf_ofs;
-
- m->pkt.data_len = 0;
-}
-
-/*
- * This function is called after packets have been transimited. It fetchs mbuf
- * from vpool->pool, detached it and put into vpool->ring. It also update the
- * used index and kick the guest if necessary.
- */
-static inline uint32_t __attribute__((always_inline))
-txmbuf_clean_zcp(struct virtio_net *dev, struct vpool *vpool)
-{
- struct rte_mbuf *mbuf;
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
- uint32_t used_idx = vq->last_used_idx & (vq->size - 1);
- uint32_t index = 0;
- uint32_t mbuf_count = rte_mempool_count(vpool->pool);
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool before "
- "clean is: %d\n",
- dev->device_fh, mbuf_count);
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring before "
- "clean is : %d\n",
- dev->device_fh, rte_ring_count(vpool->ring));
-
- for (index = 0; index < mbuf_count; index++) {
- mbuf = __rte_mbuf_raw_alloc(vpool->pool);
- if (likely(RTE_MBUF_INDIRECT(mbuf)))
- pktmbuf_detach_zcp(mbuf);
- rte_ring_sp_enqueue(vpool->ring, mbuf);
-
- /* Update used index buffer information. */
- vq->used->ring[used_idx].id = MBUF_HEADROOM_UINT32(mbuf);
- vq->used->ring[used_idx].len = 0;
-
- used_idx = (used_idx + 1) & (vq->size - 1);
- }
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool after "
- "clean is: %d\n",
- dev->device_fh, rte_mempool_count(vpool->pool));
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring after "
- "clean is : %d\n",
- dev->device_fh, rte_ring_count(vpool->ring));
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: before updated "
- "vq->last_used_idx:%d\n",
- dev->device_fh, vq->last_used_idx);
-
- vq->last_used_idx += mbuf_count;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: after updated "
- "vq->last_used_idx:%d\n",
- dev->device_fh, vq->last_used_idx);
-
- rte_compiler_barrier();
-
- *(volatile uint16_t *)&vq->used->idx += mbuf_count;
-
- /* Kick guest if required. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-
- return 0;
-}
-
-/*
- * This function is called when a virtio device is destroy.
- * It fetchs mbuf from vpool->pool, and detached it, and put into vpool->ring.
- */
-static void mbuf_destroy_zcp(struct vpool *vpool)
-{
- struct rte_mbuf *mbuf = NULL;
- uint32_t index, mbuf_count = rte_mempool_count(vpool->pool);
-
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in mempool before "
- "mbuf_destroy_zcp is: %d\n",
- mbuf_count);
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in ring before "
- "mbuf_destroy_zcp is : %d\n",
- rte_ring_count(vpool->ring));
-
- for (index = 0; index < mbuf_count; index++) {
- mbuf = __rte_mbuf_raw_alloc(vpool->pool);
- if (likely(mbuf != NULL)) {
- if (likely(RTE_MBUF_INDIRECT(mbuf)))
- pktmbuf_detach_zcp(mbuf);
- rte_ring_sp_enqueue(vpool->ring, (void *)mbuf);
- }
- }
-
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in mempool after "
- "mbuf_destroy_zcp is: %d\n",
- rte_mempool_count(vpool->pool));
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in ring after "
- "mbuf_destroy_zcp is : %d\n",
- rte_ring_count(vpool->ring));
-}
-
-/*
- * This function update the use flag and counter.
- */
-static inline uint32_t __attribute__((always_inline))
-virtio_dev_rx_zcp(struct virtio_net *dev, struct rte_mbuf **pkts,
- uint32_t count)
-{
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- struct rte_mbuf *buff;
- /* The virtio_hdr is initialised to 0. */
- struct virtio_net_hdr_mrg_rxbuf virtio_hdr
- = {{0, 0, 0, 0, 0, 0}, 0};
- uint64_t buff_hdr_addr = 0;
- uint32_t head[MAX_PKT_BURST], packet_len = 0;
- uint32_t head_idx, packet_success = 0;
- uint16_t res_cur_idx;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
-
- if (count == 0)
- return 0;
-
- vq = dev->virtqueue[VIRTIO_RXQ];
- count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
-
- res_cur_idx = vq->last_used_idx;
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n",
- dev->device_fh, res_cur_idx, res_cur_idx + count);
-
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (head_idx = 0; head_idx < count; head_idx++)
- head[head_idx] = MBUF_HEADROOM_UINT32(pkts[head_idx]);
-
- /*Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
-
- while (packet_success != count) {
- /* Get descriptor from available ring */
- desc = &vq->desc[head[packet_success]];
-
- buff = pkts[packet_success];
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in dev_rx_zcp: update the used idx for "
- "pkt[%d] descriptor idx: %d\n",
- dev->device_fh, packet_success,
- MBUF_HEADROOM_UINT32(buff));
-
- PRINT_PACKET(dev,
- (uintptr_t)(((uint64_t)(uintptr_t)buff->buf_addr)
- + RTE_PKTMBUF_HEADROOM),
- rte_pktmbuf_data_len(buff), 0);
-
- /* Buffer address translation for virtio header. */
- buff_hdr_addr = gpa_to_vva(dev, desc->addr);
- packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
-
- /*
- * If the descriptors are chained the header and data are
- * placed in separate buffers.
- */
- if (desc->flags & VRING_DESC_F_NEXT) {
- desc->len = vq->vhost_hlen;
- desc = &vq->desc[desc->next];
- desc->len = rte_pktmbuf_data_len(buff);
- } else {
- desc->len = packet_len;
- }
-
- /* Update used ring with desc information */
- vq->used->ring[res_cur_idx & (vq->size - 1)].id
- = head[packet_success];
- vq->used->ring[res_cur_idx & (vq->size - 1)].len
- = packet_len;
- res_cur_idx++;
- packet_success++;
-
- /* A header is required per buffer. */
- rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
- (const void *)&virtio_hdr, vq->vhost_hlen);
-
- PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
-
- if (likely(packet_success < count)) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- }
- }
-
- rte_compiler_barrier();
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in dev_rx_zcp: before update used idx: "
- "vq.last_used_idx: %d, vq->used->idx: %d\n",
- dev->device_fh, vq->last_used_idx, vq->used->idx);
-
- *(volatile uint16_t *)&vq->used->idx += count;
- vq->last_used_idx += count;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in dev_rx_zcp: after update used idx: "
- "vq.last_used_idx: %d, vq->used->idx: %d\n",
- dev->device_fh, vq->last_used_idx, vq->used->idx);
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-
- return count;
-}
-
-/*
- * This function routes the TX packet to the correct interface.
- * This may be a local device or the physical port.
- */
-static inline void __attribute__((always_inline))
-virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m,
- uint32_t desc_idx, uint8_t need_copy)
-{
- struct mbuf_table *tx_q;
- struct rte_mbuf **m_table;
- struct rte_mbuf *mbuf = NULL;
- unsigned len, ret, offset = 0;
- struct vpool *vpool;
- struct virtio_net_data_ll *dev_ll = ll_root_used;
- struct ether_hdr *pkt_hdr = (struct ether_hdr *)m->pkt.data;
- uint16_t vlan_tag = (uint16_t)vlan_tags[(uint16_t)dev->device_fh];
-
- /*Add packet to the port tx queue*/
- tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
- len = tx_q->len;
-
- /* Allocate an mbuf and populate the structure. */
- vpool = &vpool_array[MAX_QUEUES + (uint16_t)dev->vmdq_rx_q];
- rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf);
- if (unlikely(mbuf == NULL)) {
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Failed to allocate memory for mbuf.\n",
- dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- return;
- }
-
- if (vm2vm_mode == VM2VM_HARDWARE) {
- /* Avoid using a vlan tag from any vm for external pkt, such as
- * vlan_tags[dev->device_fh], oterwise, it conflicts when pool
- * selection, MAC address determines it as an external pkt
- * which should go to network, while vlan tag determine it as
- * a vm2vm pkt should forward to another vm. Hardware confuse
- * such a ambiguous situation, so pkt will lost.
- */
- vlan_tag = external_pkt_default_vlan_tag;
- while (dev_ll != NULL) {
- if (likely(dev_ll->dev->ready == DEVICE_RX) &&
- ether_addr_cmp(&(pkt_hdr->d_addr),
- &dev_ll->dev->mac_address)) {
-
- /*
- * Drop the packet if the TX packet is destined
- * for the TX device.
- */
- if (unlikely(dev_ll->dev->device_fh
- == dev->device_fh)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") TX: Source and destination"
- "MAC addresses are the same. Dropping "
- "packet.\n",
- dev_ll->dev->device_fh);
- MBUF_HEADROOM_UINT32(mbuf)
- = (uint32_t)desc_idx;
- __rte_mbuf_raw_free(mbuf);
- return;
- }
-
- /*
- * Packet length offset 4 bytes for HW vlan
- * strip when L2 switch back.
- */
- offset = 4;
- vlan_tag =
- (uint16_t)
- vlan_tags[(uint16_t)dev_ll->dev->device_fh];
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") TX: pkt to local VM device id:"
- "(%"PRIu64") vlan tag: %d.\n",
- dev->device_fh, dev_ll->dev->device_fh,
- vlan_tag);
-
- break;
- }
- dev_ll = dev_ll->next;
- }
- }
-
- mbuf->pkt.nb_segs = m->pkt.nb_segs;
- mbuf->pkt.next = m->pkt.next;
- mbuf->pkt.data_len = m->pkt.data_len + offset;
- mbuf->pkt.pkt_len = mbuf->pkt.data_len;
- if (unlikely(need_copy)) {
- /* Copy the packet contents to the mbuf. */
- rte_memcpy((void *)((uint8_t *)mbuf->pkt.data),
- (const void *) ((uint8_t *)m->pkt.data),
- m->pkt.data_len);
- } else {
- mbuf->pkt.data = m->pkt.data;
- mbuf->buf_physaddr = m->buf_physaddr;
- mbuf->buf_addr = m->buf_addr;
- }
- mbuf->ol_flags = PKT_TX_VLAN_PKT;
- mbuf->pkt.vlan_macip.f.vlan_tci = vlan_tag;
- mbuf->pkt.vlan_macip.f.l2_len = sizeof(struct ether_hdr);
- mbuf->pkt.vlan_macip.f.l3_len = sizeof(struct ipv4_hdr);
- MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
-
- tx_q->m_table[len] = mbuf;
- len++;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in tx_route_zcp: pkt: nb_seg: %d, next:%s\n",
- dev->device_fh,
- mbuf->pkt.nb_segs,
- (mbuf->pkt.next == NULL) ? "null" : "non-null");
-
- if (enable_stats) {
- dev_statistics[dev->device_fh].tx_total++;
- dev_statistics[dev->device_fh].tx++;
- }
-
- if (unlikely(len == MAX_PKT_BURST)) {
- m_table = (struct rte_mbuf **)tx_q->m_table;
- ret = rte_eth_tx_burst(ports[0],
- (uint16_t)tx_q->txq_id, m_table, (uint16_t) len);
-
- /*
- * Free any buffers not handled by TX and update
- * the port stats.
- */
- if (unlikely(ret < len)) {
- do {
- rte_pktmbuf_free(m_table[ret]);
- } while (++ret < len);
- }
-
- len = 0;
- txmbuf_clean_zcp(dev, vpool);
- }
-
- tx_q->len = len;
-
- return;
-}
-
-/*
- * This function TX all available packets in virtio TX queue for one
- * virtio-net device. If it is first packet, it learns MAC address and
- * setup VMDQ.
- */
-static inline void __attribute__((always_inline))
-virtio_dev_tx_zcp(struct virtio_net *dev)
-{
- struct rte_mbuf m;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- uint64_t buff_addr = 0, phys_addr;
- uint32_t head[MAX_PKT_BURST];
- uint32_t i;
- uint16_t free_entries, packet_success = 0;
- uint16_t avail_idx;
- uint8_t need_copy = 0;
- hpa_type addr_type;
-
- vq = dev->virtqueue[VIRTIO_TXQ];
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- /* If there are no available buffers then return. */
- if (vq->last_used_idx_res == avail_idx)
- return;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
-
- /* Prefetch available ring to retrieve head indexes. */
- rte_prefetch0(&vq->avail->ring[vq->last_used_idx_res & (vq->size - 1)]);
-
- /* Get the number of free entries in the ring */
- free_entries = (avail_idx - vq->last_used_idx_res);
-
- /* Limit to MAX_PKT_BURST. */
- free_entries
- = (free_entries > MAX_PKT_BURST) ? MAX_PKT_BURST : free_entries;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n",
- dev->device_fh, free_entries);
-
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (i = 0; i < free_entries; i++)
- head[i]
- = vq->avail->ring[(vq->last_used_idx_res + i)
- & (vq->size - 1)];
-
- vq->last_used_idx_res += free_entries;
-
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
-
- while (packet_success < free_entries) {
- desc = &vq->desc[head[packet_success]];
-
- /* Discard first buffer as it is the virtio header */
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- buff_addr = gpa_to_vva(dev, desc->addr);
- phys_addr = gpa_to_hpa(dev, desc->addr, desc->len, &addr_type);
-
- if (likely(packet_success < (free_entries - 1)))
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success + 1]]);
-
- if (unlikely(addr_type == PHYS_ADDR_INVALID)) {
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Invalid frame buffer address found"
- "when TX packets!\n",
- dev->device_fh);
- packet_success++;
- continue;
- }
-
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)buff_addr);
-
- /*
- * Setup dummy mbuf. This is copied to a real mbuf if
- * transmitted out the physical port.
- */
- m.pkt.data_len = desc->len;
- m.pkt.nb_segs = 1;
- m.pkt.next = NULL;
- m.pkt.data = (void *)(uintptr_t)buff_addr;
- m.buf_addr = m.pkt.data;
- m.buf_physaddr = phys_addr;
-
- /*
- * Check if the frame buffer address from guest crosses
- * sub-region or not.
- */
- if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) {
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Frame buffer address cross "
- "sub-regioin found when attaching TX frame "
- "buffer address!\n",
- dev->device_fh);
- need_copy = 1;
- } else
- need_copy = 0;
-
- PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
-
- /*
- * If this is the first received packet we need to learn
- * the MAC and setup VMDQ
- */
- if (unlikely(dev->ready == DEVICE_MAC_LEARNING)) {
- if (dev->remove || (link_vmdq(dev, &m) == -1)) {
- /*
- * Discard frame if device is scheduled for
- * removal or a duplicate MAC address is found.
- */
- packet_success += free_entries;
- vq->last_used_idx += packet_success;
- break;
- }
- }
-
- virtio_tx_route_zcp(dev, &m, head[packet_success], need_copy);
- packet_success++;
- }
-}
-
-/*
- * This function is called by each data core. It handles all RX/TX registered
- * with the core. For TX the specific lcore linked list is used. For RX, MAC
- * addresses are compared with all devices in the main linked list.
- */
-static int
-switch_worker_zcp(__attribute__((unused)) void *arg)
-{
- struct virtio_net *dev = NULL;
- struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
- struct virtio_net_data_ll *dev_ll;
- struct mbuf_table *tx_q;
- volatile struct lcore_ll_info *lcore_ll;
- const uint64_t drain_tsc
- = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S
- * BURST_TX_DRAIN_US;
- uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
- unsigned ret;
- const uint16_t lcore_id = rte_lcore_id();
- uint16_t count_in_ring, rx_count = 0;
-
- RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
-
- lcore_ll = lcore_info[lcore_id].lcore_ll;
- prev_tsc = 0;
-
- while (1) {
- cur_tsc = rte_rdtsc();
-
- /* TX burst queue drain */
- diff_tsc = cur_tsc - prev_tsc;
- if (unlikely(diff_tsc > drain_tsc)) {
- /*
- * Get mbuf from vpool.pool and detach mbuf and
- * put back into vpool.ring.
- */
- dev_ll = lcore_ll->ll_root_used;
- while ((dev_ll != NULL) && (dev_ll->dev != NULL)) {
- /* Get virtio device ID */
- dev = dev_ll->dev;
-
- if (likely(!dev->remove)) {
- tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
- if (tx_q->len) {
- LOG_DEBUG(VHOST_DATA,
- "TX queue drained after timeout"
- " with burst size %u\n",
- tx_q->len);
-
- /*
- * Tx any packets in the queue
- */
- ret = rte_eth_tx_burst(
- ports[0],
- (uint16_t)tx_q->txq_id,
- (struct rte_mbuf **)
- tx_q->m_table,
- (uint16_t)tx_q->len);
- if (unlikely(ret < tx_q->len)) {
- do {
- rte_pktmbuf_free(
- tx_q->m_table[ret]);
- } while (++ret < tx_q->len);
- }
- tx_q->len = 0;
-
- txmbuf_clean_zcp(dev,
- &vpool_array[MAX_QUEUES+dev->vmdq_rx_q]);
- }
- }
- dev_ll = dev_ll->next;
- }
- prev_tsc = cur_tsc;
- }
-
- rte_prefetch0(lcore_ll->ll_root_used);
-
- /*
- * Inform the configuration core that we have exited the linked
- * list and that no devices are in use if requested.
- */
- if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
- lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
-
- /* Process devices */
- dev_ll = lcore_ll->ll_root_used;
-
- while ((dev_ll != NULL) && (dev_ll->dev != NULL)) {
- dev = dev_ll->dev;
- if (unlikely(dev->remove)) {
- dev_ll = dev_ll->next;
- unlink_vmdq(dev);
- dev->ready = DEVICE_SAFE_REMOVE;
- continue;
- }
-
- if (likely(dev->ready == DEVICE_RX)) {
- uint32_t index = dev->vmdq_rx_q;
- uint16_t i;
- count_in_ring
- = rte_ring_count(vpool_array[index].ring);
- uint16_t free_entries
- = (uint16_t)get_available_ring_num_zcp(dev);
-
- /*
- * Attach all mbufs in vpool.ring and put back
- * into vpool.pool.
- */
- for (i = 0;
- i < RTE_MIN(free_entries,
- RTE_MIN(count_in_ring, MAX_PKT_BURST));
- i++)
- attach_rxmbuf_zcp(dev);
-
- /* Handle guest RX */
- rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst,
- MAX_PKT_BURST);
-
- if (rx_count) {
- ret_count = virtio_dev_rx_zcp(dev,
- pkts_burst, rx_count);
- if (enable_stats) {
- dev_statistics[dev->device_fh].rx_total
- += rx_count;
- dev_statistics[dev->device_fh].rx
- += ret_count;
- }
- while (likely(rx_count)) {
- rx_count--;
- pktmbuf_detach_zcp(
- pkts_burst[rx_count]);
- rte_ring_sp_enqueue(
- vpool_array[index].ring,
- (void *)pkts_burst[rx_count]);
- }
- }
- }
-
- if (likely(!dev->remove))
- /* Handle guest TX */
- virtio_dev_tx_zcp(dev);
-
- /* Move to the next device in the list */
- dev_ll = dev_ll->next;
- }
- }
-
- return 0;
-}
-
-
-/*
- * Add an entry to a used linked list. A free entry must first be found
- * in the free linked list using get_data_ll_free_entry();
- */
-static void
-add_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
- struct virtio_net_data_ll *ll_dev)
-{
- struct virtio_net_data_ll *ll = *ll_root_addr;
-
- /* Set next as NULL and use a compiler barrier to avoid reordering. */
- ll_dev->next = NULL;
- rte_compiler_barrier();
-
- /* If ll == NULL then this is the first device. */
- if (ll) {
- /* Increment to the tail of the linked list. */
- while ((ll->next != NULL) )
- ll = ll->next;
-
- ll->next = ll_dev;
- } else {
- *ll_root_addr = ll_dev;
- }
-}
-
-/*
- * Remove an entry from a used linked list. The entry must then be added to
- * the free linked list using put_data_ll_free_entry().
- */
-static void
-rm_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
- struct virtio_net_data_ll *ll_dev,
- struct virtio_net_data_ll *ll_dev_last)
-{
- struct virtio_net_data_ll *ll = *ll_root_addr;
-
- if (unlikely((ll == NULL) || (ll_dev == NULL)))
- return;
-
- if (ll_dev == ll)
- *ll_root_addr = ll_dev->next;
- else
- if (likely(ll_dev_last != NULL))
- ll_dev_last->next = ll_dev->next;
- else
- RTE_LOG(ERR, VHOST_CONFIG, "Remove entry form ll failed.\n");
-}
-
-/*
- * Find and return an entry from the free linked list.
- */
-static struct virtio_net_data_ll *
-get_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr)
-{
- struct virtio_net_data_ll *ll_free = *ll_root_addr;
- struct virtio_net_data_ll *ll_dev;
-
- if (ll_free == NULL)
- return NULL;
-
- ll_dev = ll_free;
- *ll_root_addr = ll_free->next;
-
- return ll_dev;
-}
-
-/*
- * Place an entry back on to the free linked list.
- */
-static void
-put_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr,
- struct virtio_net_data_ll *ll_dev)
-{
- struct virtio_net_data_ll *ll_free = *ll_root_addr;
-
- if (ll_dev == NULL)
- return;
-
- ll_dev->next = ll_free;
- *ll_root_addr = ll_dev;
-}
-
-/*
- * Creates a linked list of a given size.
- */
-static struct virtio_net_data_ll *
-alloc_data_ll(uint32_t size)
-{
- struct virtio_net_data_ll *ll_new;
- uint32_t i;
-
- /* Malloc and then chain the linked list. */
- ll_new = malloc(size * sizeof(struct virtio_net_data_ll));
- if (ll_new == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for ll_new.\n");
- return NULL;
- }
-
- for (i = 0; i < size - 1; i++) {
- ll_new[i].dev = NULL;
- ll_new[i].next = &ll_new[i+1];
- }
- ll_new[i].next = NULL;
-
- return (ll_new);
-}
-
-/*
- * Create the main linked list along with each individual cores linked list. A used and a free list
- * are created to manage entries.
- */
-static int
-init_data_ll (void)
-{
- int lcore;
-
- RTE_LCORE_FOREACH_SLAVE(lcore) {
- lcore_info[lcore].lcore_ll = malloc(sizeof(struct lcore_ll_info));
- if (lcore_info[lcore].lcore_ll == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for lcore_ll.\n");
- return -1;
- }
-
- lcore_info[lcore].lcore_ll->device_num = 0;
- lcore_info[lcore].lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
- lcore_info[lcore].lcore_ll->ll_root_used = NULL;
- if (num_devices % num_switching_cores)
- lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll((num_devices / num_switching_cores) + 1);
- else
- lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll(num_devices / num_switching_cores);
- }
-
- /* Allocate devices up to a maximum of MAX_DEVICES. */
- ll_root_free = alloc_data_ll(MIN((num_devices), MAX_DEVICES));
-
- return 0;
-}
-
-/*
- * Set virtqueue flags so that we do not receive interrupts.
- */
-static void
-set_irq_status (struct virtio_net *dev)
-{
- dev->virtqueue[VIRTIO_RXQ]->used->flags = VRING_USED_F_NO_NOTIFY;
- dev->virtqueue[VIRTIO_TXQ]->used->flags = VRING_USED_F_NO_NOTIFY;
-}
-
-/*
- * Remove a device from the specific data core linked list and from the main linked list. Synchonization
- * occurs through the use of the lcore dev_removal_flag. Device is made volatile here to avoid re-ordering
- * of dev->remove=1 which can cause an infinite loop in the rte_pause loop.
- */
-static void
-destroy_device (volatile struct virtio_net *dev)
-{
- struct virtio_net_data_ll *ll_lcore_dev_cur;
- struct virtio_net_data_ll *ll_main_dev_cur;
- struct virtio_net_data_ll *ll_lcore_dev_last = NULL;
- struct virtio_net_data_ll *ll_main_dev_last = NULL;
- int lcore;
-
- dev->flags &= ~VIRTIO_DEV_RUNNING;
-
- /*set the remove flag. */
- dev->remove = 1;
-
- while(dev->ready != DEVICE_SAFE_REMOVE) {
- rte_pause();
- }
-
- /* Search for entry to be removed from lcore ll */
- ll_lcore_dev_cur = lcore_info[dev->coreid].lcore_ll->ll_root_used;
- while (ll_lcore_dev_cur != NULL) {
- if (ll_lcore_dev_cur->dev == dev) {
- break;
- } else {
- ll_lcore_dev_last = ll_lcore_dev_cur;
- ll_lcore_dev_cur = ll_lcore_dev_cur->next;
- }
- }
-
- if (ll_lcore_dev_cur == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG,
- "(%"PRIu64") Failed to find the dev to be destroy.\n",
- dev->device_fh);
- return;
- }
-
- /* Search for entry to be removed from main ll */
- ll_main_dev_cur = ll_root_used;
- ll_main_dev_last = NULL;
- while (ll_main_dev_cur != NULL) {
- if (ll_main_dev_cur->dev == dev) {
- break;
- } else {
- ll_main_dev_last = ll_main_dev_cur;
- ll_main_dev_cur = ll_main_dev_cur->next;
- }
- }
-
- /* Remove entries from the lcore and main ll. */
- rm_data_ll_entry(&lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->ll_root_used, ll_lcore_dev_cur, ll_lcore_dev_last);
- rm_data_ll_entry(&ll_root_used, ll_main_dev_cur, ll_main_dev_last);
-
- /* Set the dev_removal_flag on each lcore. */
- RTE_LCORE_FOREACH_SLAVE(lcore) {
- lcore_info[lcore].lcore_ll->dev_removal_flag = REQUEST_DEV_REMOVAL;
- }
-
- /*
- * Once each core has set the dev_removal_flag to ACK_DEV_REMOVAL we can be sure that
- * they can no longer access the device removed from the linked lists and that the devices
- * are no longer in use.
- */
- RTE_LCORE_FOREACH_SLAVE(lcore) {
- while (lcore_info[lcore].lcore_ll->dev_removal_flag != ACK_DEV_REMOVAL) {
- rte_pause();
- }
- }
-
- /* Add the entries back to the lcore and main free ll.*/
- put_data_ll_free_entry(&lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->ll_root_free, ll_lcore_dev_cur);
- put_data_ll_free_entry(&ll_root_free, ll_main_dev_cur);
-
- /* Decrement number of device on the lcore. */
- lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->device_num--;
-
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been removed from data core\n", dev->device_fh);
-
- if (zero_copy) {
- struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
-
- /* Stop the RX queue. */
- if (rte_eth_dev_rx_queue_stop(ports[0], dev->vmdq_rx_q) != 0) {
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In destroy_device: Failed to stop "
- "rx queue:%d\n",
- dev->device_fh,
- dev->vmdq_rx_q);
- }
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") in destroy_device: Start put mbuf in "
- "mempool back to ring for RX queue: %d\n",
- dev->device_fh, dev->vmdq_rx_q);
-
- mbuf_destroy_zcp(vpool);
-
- /* Stop the TX queue. */
- if (rte_eth_dev_tx_queue_stop(ports[0], dev->vmdq_rx_q) != 0) {
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In destroy_device: Failed to "
- "stop tx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
- }
-
- vpool = &vpool_array[dev->vmdq_rx_q + MAX_QUEUES];
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") destroy_device: Start put mbuf in mempool "
- "back to ring for TX queue: %d, dev:(%"PRIu64")\n",
- dev->device_fh, (dev->vmdq_rx_q + MAX_QUEUES),
- dev->device_fh);
-
- mbuf_destroy_zcp(vpool);
- }
-
-}
-
-/*
- * A new device is added to a data core. First the device is added to the main linked list
- * and the allocated to a specific data core.
- */
-static int
-new_device (struct virtio_net *dev)
-{
- struct virtio_net_data_ll *ll_dev;
- int lcore, core_add = 0;
- uint32_t device_num_min = num_devices;
-
- /* Add device to main ll */
- ll_dev = get_data_ll_free_entry(&ll_root_free);
- if (ll_dev == NULL) {
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") No free entry found in linked list. Device limit "
- "of %d devices per core has been reached\n",
- dev->device_fh, num_devices);
- return -1;
- }
- ll_dev->dev = dev;
- add_data_ll_entry(&ll_root_used, ll_dev);
- ll_dev->dev->vmdq_rx_q
- = ll_dev->dev->device_fh * (num_queues / num_devices);
-
- if (zero_copy) {
- uint32_t index = ll_dev->dev->vmdq_rx_q;
- uint32_t count_in_ring, i;
- struct mbuf_table *tx_q;
-
- count_in_ring = rte_ring_count(vpool_array[index].ring);
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") in new_device: mbuf count in mempool "
- "before attach is: %d\n",
- dev->device_fh,
- rte_mempool_count(vpool_array[index].pool));
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") in new_device: mbuf count in ring "
- "before attach is : %d\n",
- dev->device_fh, count_in_ring);
-
- /*
- * Attach all mbufs in vpool.ring and put back intovpool.pool.
- */
- for (i = 0; i < count_in_ring; i++)
- attach_rxmbuf_zcp(dev);
-
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in "
- "mempool after attach is: %d\n",
- dev->device_fh,
- rte_mempool_count(vpool_array[index].pool));
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in "
- "ring after attach is : %d\n",
- dev->device_fh,
- rte_ring_count(vpool_array[index].ring));
-
- tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
- tx_q->txq_id = dev->vmdq_rx_q;
-
- if (rte_eth_dev_tx_queue_start(ports[0], dev->vmdq_rx_q) != 0) {
- struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In new_device: Failed to start "
- "tx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
-
- mbuf_destroy_zcp(vpool);
- return -1;
- }
-
- if (rte_eth_dev_rx_queue_start(ports[0], dev->vmdq_rx_q) != 0) {
- struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In new_device: Failed to start "
- "rx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
-
- /* Stop the TX queue. */
- if (rte_eth_dev_tx_queue_stop(ports[0],
- dev->vmdq_rx_q) != 0) {
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In new_device: Failed to "
- "stop tx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
- }
-
- mbuf_destroy_zcp(vpool);
- return -1;
- }
-
- }
-
- /*reset ready flag*/
- dev->ready = DEVICE_MAC_LEARNING;
- dev->remove = 0;
-
- /* Find a suitable lcore to add the device. */
- RTE_LCORE_FOREACH_SLAVE(lcore) {
- if (lcore_info[lcore].lcore_ll->device_num < device_num_min) {
- device_num_min = lcore_info[lcore].lcore_ll->device_num;
- core_add = lcore;
- }
- }
- /* Add device to lcore ll */
- ll_dev->dev->coreid = core_add;
- ll_dev = get_data_ll_free_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_free);
- if (ll_dev == NULL) {
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Failed to add device to data core\n", dev->device_fh);
- dev->ready = DEVICE_SAFE_REMOVE;
- destroy_device(dev);
- return -1;
- }
- ll_dev->dev = dev;
- add_data_ll_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_used, ll_dev);
-
- /* Initialize device stats */
- memset(&dev_statistics[dev->device_fh], 0, sizeof(struct device_statistics));
-
- /* Disable notifications. */
- set_irq_status(dev);
- lcore_info[ll_dev->dev->coreid].lcore_ll->device_num++;
- dev->flags |= VIRTIO_DEV_RUNNING;
-
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d\n", dev->device_fh, dev->coreid);
-
- return 0;
-}
-
-/*
- * These callback allow devices to be added to the data core when configuration
- * has been fully complete.
- */
-static const struct virtio_net_device_ops virtio_net_device_ops =
-{
- .new_device = new_device,
- .destroy_device = destroy_device,
-};
-
-/*
- * This is a thread will wake up after a period to print stats if the user has
- * enabled them.
- */
-static void
-print_stats(void)
-{
- struct virtio_net_data_ll *dev_ll;
- uint64_t tx_dropped, rx_dropped;
- uint64_t tx, tx_total, rx, rx_total;
- uint32_t device_fh;
- const char clr[] = { 27, '[', '2', 'J', '\0' };
- const char top_left[] = { 27, '[', '1', ';', '1', 'H','\0' };
-
- while(1) {
- sleep(enable_stats);
-
- /* Clear screen and move to top left */
- printf("%s%s", clr, top_left);
-
- printf("\nDevice statistics ====================================");
-
- dev_ll = ll_root_used;
- while (dev_ll != NULL) {
- device_fh = (uint32_t)dev_ll->dev->device_fh;
- tx_total = dev_statistics[device_fh].tx_total;
- tx = dev_statistics[device_fh].tx;
- tx_dropped = tx_total - tx;
- if (zero_copy == 0) {
- rx_total = rte_atomic64_read(
- &dev_statistics[device_fh].rx_total_atomic);
- rx = rte_atomic64_read(
- &dev_statistics[device_fh].rx_atomic);
- } else {
- rx_total = dev_statistics[device_fh].rx_total;
- rx = dev_statistics[device_fh].rx;
- }
- rx_dropped = rx_total - rx;
-
- printf("\nStatistics for device %"PRIu32" ------------------------------"
- "\nTX total: %"PRIu64""
- "\nTX dropped: %"PRIu64""
- "\nTX successful: %"PRIu64""
- "\nRX total: %"PRIu64""
- "\nRX dropped: %"PRIu64""
- "\nRX successful: %"PRIu64"",
- device_fh,
- tx_total,
- tx_dropped,
- tx,
- rx_total,
- rx_dropped,
- rx);
-
- dev_ll = dev_ll->next;
- }
- printf("\n======================================================\n");
- }
-}
-
-static void
-setup_mempool_tbl(int socket, uint32_t index, char *pool_name,
- char *ring_name, uint32_t nb_mbuf)
-{
- uint16_t roomsize = VIRTIO_DESCRIPTOR_LEN_ZCP + RTE_PKTMBUF_HEADROOM;
- vpool_array[index].pool
- = rte_mempool_create(pool_name, nb_mbuf, MBUF_SIZE_ZCP,
- MBUF_CACHE_SIZE_ZCP, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, (void *)(uintptr_t)roomsize,
- rte_pktmbuf_init, NULL, socket, 0);
- if (vpool_array[index].pool != NULL) {
- vpool_array[index].ring
- = rte_ring_create(ring_name,
- rte_align32pow2(nb_mbuf + 1),
- socket, RING_F_SP_ENQ | RING_F_SC_DEQ);
- if (likely(vpool_array[index].ring != NULL)) {
- LOG_DEBUG(VHOST_CONFIG,
- "in setup_mempool_tbl: mbuf count in "
- "mempool is: %d\n",
- rte_mempool_count(vpool_array[index].pool));
- LOG_DEBUG(VHOST_CONFIG,
- "in setup_mempool_tbl: mbuf count in "
- "ring is: %d\n",
- rte_ring_count(vpool_array[index].ring));
- } else {
- rte_exit(EXIT_FAILURE, "ring_create(%s) failed",
- ring_name);
- }
-
- /* Need consider head room. */
- vpool_array[index].buf_size = roomsize - RTE_PKTMBUF_HEADROOM;
- } else {
- rte_exit(EXIT_FAILURE, "mempool_create(%s) failed", pool_name);
- }
-}
-
-
-/*
- * Main function, does initialisation and calls the per-lcore functions. The CUSE
- * device is also registered here to handle the IOCTLs.
- */
-int
-MAIN(int argc, char *argv[])
-{
- struct rte_mempool *mbuf_pool = NULL;
- unsigned lcore_id, core_id = 0;
- unsigned nb_ports, valid_num_ports;
- int ret;
- uint8_t portid, queue_id = 0;
- static pthread_t tid;
-
- /* init EAL */
- ret = rte_eal_init(argc, argv);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
- argc -= ret;
- argv += ret;
-
- /* parse app arguments */
- ret = us_vhost_parse_args(argc, argv);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Invalid argument\n");
-
- if (rte_eal_pci_probe() != 0)
- rte_exit(EXIT_FAILURE, "Error with NIC driver initialization\n");
-
- for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id ++)
- if (rte_lcore_is_enabled(lcore_id))
- lcore_ids[core_id ++] = lcore_id;
-
- if (rte_lcore_count() > RTE_MAX_LCORE)
- rte_exit(EXIT_FAILURE,"Not enough cores\n");
-
- /*set the number of swithcing cores available*/
- num_switching_cores = rte_lcore_count()-1;
-
- /* Get the number of physical ports. */
- nb_ports = rte_eth_dev_count();
- if (nb_ports > RTE_MAX_ETHPORTS)
- nb_ports = RTE_MAX_ETHPORTS;
-
- /*
- * Update the global var NUM_PORTS and global array PORTS
- * and get value of var VALID_NUM_PORTS according to system ports number
- */
- valid_num_ports = check_ports_num(nb_ports);
-
- if ((valid_num_ports == 0) || (valid_num_ports > MAX_SUP_PORTS)) {
- RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
- "but only %u port can be enabled\n",num_ports, MAX_SUP_PORTS);
- return -1;
- }
-
- if (zero_copy == 0) {
- /* Create the mbuf pool. */
- mbuf_pool = rte_mempool_create(
- "MBUF_POOL",
- NUM_MBUFS_PER_PORT
- * valid_num_ports,
- MBUF_SIZE, MBUF_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
- if (mbuf_pool == NULL)
- rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
-
- for (queue_id = 0; queue_id < MAX_QUEUES + 1; queue_id++)
- vpool_array[queue_id].pool = mbuf_pool;
-
- if (vm2vm_mode == VM2VM_HARDWARE) {
- /* Enable VT loop back to let L2 switch to do it. */
- vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1;
- LOG_DEBUG(VHOST_CONFIG,
- "Enable loop back for L2 switch in vmdq.\n");
- }
- } else {
- uint32_t nb_mbuf;
- char pool_name[RTE_MEMPOOL_NAMESIZE];
- char ring_name[RTE_MEMPOOL_NAMESIZE];
-
- rx_conf_default.start_rx_per_q = (uint8_t)zero_copy;
- rx_conf_default.rx_drop_en = 0;
- tx_conf_default.start_tx_per_q = (uint8_t)zero_copy;
- nb_mbuf = num_rx_descriptor
- + num_switching_cores * MBUF_CACHE_SIZE_ZCP
- + num_switching_cores * MAX_PKT_BURST;
-
- for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) {
- snprintf(pool_name, sizeof(pool_name),
- "rxmbuf_pool_%u", queue_id);
- snprintf(ring_name, sizeof(ring_name),
- "rxmbuf_ring_%u", queue_id);
- setup_mempool_tbl(rte_socket_id(), queue_id,
- pool_name, ring_name, nb_mbuf);
- }
-
- nb_mbuf = num_tx_descriptor
- + num_switching_cores * MBUF_CACHE_SIZE_ZCP
- + num_switching_cores * MAX_PKT_BURST;
-
- for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) {
- snprintf(pool_name, sizeof(pool_name),
- "txmbuf_pool_%u", queue_id);
- snprintf(ring_name, sizeof(ring_name),
- "txmbuf_ring_%u", queue_id);
- setup_mempool_tbl(rte_socket_id(),
- (queue_id + MAX_QUEUES),
- pool_name, ring_name, nb_mbuf);
- }
-
- if (vm2vm_mode == VM2VM_HARDWARE) {
- /* Enable VT loop back to let L2 switch to do it. */
- vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1;
- LOG_DEBUG(VHOST_CONFIG,
- "Enable loop back for L2 switch in vmdq.\n");
- }
- }
- /* Set log level. */
- rte_set_log_level(LOG_LEVEL);
-
- /* initialize all ports */
- for (portid = 0; portid < nb_ports; portid++) {
- /* skip ports that are not enabled */
- if ((enabled_port_mask & (1 << portid)) == 0) {
- RTE_LOG(INFO, VHOST_PORT,
- "Skipping disabled port %d\n", portid);
- continue;
- }
- if (port_init(portid) != 0)
- rte_exit(EXIT_FAILURE,
- "Cannot initialize network ports\n");
- }
-
- /* Initialise all linked lists. */
- if (init_data_ll() == -1)
- rte_exit(EXIT_FAILURE, "Failed to initialize linked list\n");
-
- /* Initialize device stats */
- memset(&dev_statistics, 0, sizeof(dev_statistics));
-
- /* Enable stats if the user option is set. */
- if (enable_stats)
- pthread_create(&tid, NULL, (void*)print_stats, NULL );
-
- /* Launch all data cores. */
- if (zero_copy == 0) {
- RTE_LCORE_FOREACH_SLAVE(lcore_id) {
- rte_eal_remote_launch(switch_worker,
- mbuf_pool, lcore_id);
- }
- } else {
- uint32_t count_in_mempool, index, i;
- for (index = 0; index < 2*MAX_QUEUES; index++) {
- /* For all RX and TX queues. */
- count_in_mempool
- = rte_mempool_count(vpool_array[index].pool);
-
- /*
- * Transfer all un-attached mbufs from vpool.pool
- * to vpoo.ring.
- */
- for (i = 0; i < count_in_mempool; i++) {
- struct rte_mbuf *mbuf
- = __rte_mbuf_raw_alloc(
- vpool_array[index].pool);
- rte_ring_sp_enqueue(vpool_array[index].ring,
- (void *)mbuf);
- }
-
- LOG_DEBUG(VHOST_CONFIG,
- "in MAIN: mbuf count in mempool at initial "
- "is: %d\n", count_in_mempool);
- LOG_DEBUG(VHOST_CONFIG,
- "in MAIN: mbuf count in ring at initial is :"
- " %d\n",
- rte_ring_count(vpool_array[index].ring));
- }
-
- RTE_LCORE_FOREACH_SLAVE(lcore_id)
- rte_eal_remote_launch(switch_worker_zcp, NULL,
- lcore_id);
- }
-
- /* Register CUSE device to handle IOCTLs. */
- ret = register_cuse_device((char*)&dev_basename, dev_index, get_virtio_net_callbacks());
- if (ret != 0)
- rte_exit(EXIT_FAILURE,"CUSE device setup failure.\n");
-
- init_virtio_net(&virtio_net_device_ops);
-
- /* Start CUSE session. */
- start_cuse_session_loop();
- return 0;
-
-}
-
diff --git a/lib/librte_vhost/main.h b/lib/librte_vhost/main.h
deleted file mode 100644
index c15d938..0000000
--- a/lib/librte_vhost/main.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _MAIN_H_
-#define _MAIN_H_
-
-#ifdef RTE_EXEC_ENV_BAREMETAL
-#define MAIN _main
-#else
-#define MAIN main
-#endif
-
-//#define DEBUG
-
-#ifdef DEBUG
-#define LOG_LEVEL RTE_LOG_DEBUG
-#define LOG_DEBUG(log_type, fmt, args...) do { \
- RTE_LOG(DEBUG, log_type, fmt, ##args); \
-} while (0)
-#else
-#define LOG_LEVEL RTE_LOG_INFO
-#define LOG_DEBUG(log_type, fmt, args...) do{} while(0)
-#endif
-
-/* Macros for printing using RTE_LOG */
-#define RTE_LOGTYPE_VHOST_CONFIG RTE_LOGTYPE_USER1
-#define RTE_LOGTYPE_VHOST_DATA RTE_LOGTYPE_USER2
-#define RTE_LOGTYPE_VHOST_PORT RTE_LOGTYPE_USER3
-
-/*
- * Device linked list structure for data path.
- */
-struct virtio_net_data_ll
-{
- struct virtio_net *dev; /* Pointer to device created by configuration core. */
- struct virtio_net_data_ll *next; /* Pointer to next device in linked list. */
-};
-
-/*
- * Structure containing data core specific information.
- */
-struct lcore_ll_info
-{
- struct virtio_net_data_ll *ll_root_free; /* Pointer to head in free linked list. */
- struct virtio_net_data_ll *ll_root_used; /* Pointer to head of used linked list. */
- uint32_t device_num; /* Number of devices on lcore. */
- volatile uint8_t dev_removal_flag; /* Flag to synchronize device removal. */
-};
-
-struct lcore_info
-{
- struct lcore_ll_info *lcore_ll; /* Pointer to data core specific lcore_ll_info struct */
-};
-
-int MAIN(int argc, char **argv);
-#endif /* _MAIN_H_ */
diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h
new file mode 100644
index 0000000..1a2f0dc
--- /dev/null
+++ b/lib/librte_vhost/rte_virtio_net.h
@@ -0,0 +1,161 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _VIRTIO_NET_H_
+#define _VIRTIO_NET_H_
+
+/* Used to indicate that the device is running on a data core */
+#define VIRTIO_DEV_RUNNING 1
+
+/* Backend value set by guest. */
+#define VIRTIO_DEV_STOPPED -1
+
+#define PAGE_SIZE 4096
+
+/* Enum for virtqueue management. */
+enum {VIRTIO_RXQ, VIRTIO_TXQ, VIRTIO_QNUM};
+
+#define BUF_VECTOR_MAX 256
+
+/*
+ * Structure contains buffer address, length and descriptor index
+ * from vring to do scatter RX.
+*/
+struct buf_vector {
+uint64_t buf_addr;
+uint32_t buf_len;
+uint32_t desc_idx;
+};
+
+/*
+ * Structure contains variables relevant to TX/RX virtqueues.
+ */
+struct vhost_virtqueue
+{
+ struct vring_desc *desc; /* Virtqueue descriptor ring. */
+ struct vring_avail *avail; /* Virtqueue available ring. */
+ struct vring_used *used; /* Virtqueue used ring. */
+ uint32_t size; /* Size of descriptor ring. */
+ uint32_t backend; /* Backend value to determine if device should started/stopped. */
+ uint16_t vhost_hlen; /* Vhost header length (varies depending on RX merge buffers. */
+ volatile uint16_t last_used_idx; /* Last index used on the available ring */
+ volatile uint16_t last_used_idx_res; /* Used for multiple devices reserving buffers. */
+ eventfd_t callfd; /* Currently unused as polling mode is enabled. */
+ eventfd_t kickfd; /* Used to notify the guest (trigger interrupt). */
+ /* Used for scatter RX. */
+ struct buf_vector buf_vec[BUF_VECTOR_MAX];
+} __rte_cache_aligned;
+
+/*
+ * Device structure contains all configuration information relating to the device.
+ */
+struct virtio_net
+{
+ struct vhost_virtqueue *virtqueue[VIRTIO_QNUM]; /* Contains all virtqueue information. */
+ struct virtio_memory *mem; /* QEMU memory and memory region information. */
+ struct ether_addr mac_address; /* Device MAC address (Obtained on first TX packet). */
+ uint64_t features; /* Negotiated feature set. */
+ uint64_t device_fh; /* device identifier. */
+ uint32_t vmdq_rx_q; /* RX VMDQ queue number. */
+ uint32_t flags; /* Device flags. Only used to check if device is running on data core. */
+ uint32_t vlan_tag; /* Vlan tag for device. Currently set to device_id (0-63). */
+ uint16_t coreid; /* Data core that the device is added to. */
+ volatile uint8_t ready; /* A device is set as ready if the MAC address has been set. */
+ volatile uint8_t remove; /* Device is marked for removal from the data core. */
+} __rte_cache_aligned;
+
+/*
+ * Device linked list structure for configuration.
+ */
+struct virtio_net_config_ll
+{
+ struct virtio_net dev; /* Virtio device. */
+ struct virtio_net_config_ll *next; /* Next entry on linked list. */
+};
+
+/*
+ * Information relating to memory regions including offsets to addresses in QEMUs memory file.
+ */
+struct virtio_memory_regions {
+ uint64_t guest_phys_address; /* Base guest physical address of region. */
+ uint64_t guest_phys_address_end; /* End guest physical address of region. */
+ uint64_t memory_size; /* Size of region. */
+ uint64_t userspace_address; /* Base userspace address of region. */
+ uint64_t address_offset; /* Offset of region for address translation. */
+};
+
+/*
+ * Information relating to memory regions including offsets to
+ * addresses in host physical space.
+ */
+struct virtio_memory_regions_hpa {
+ /* Base guest physical address of region. */
+ uint64_t guest_phys_address;
+ /* End guest physical address of region. */
+ uint64_t guest_phys_address_end;
+ /* Size of region. */
+ uint64_t memory_size;
+ /* Offset of region for gpa to hpa translation. */
+ uint64_t host_phys_addr_offset;
+};
+
+/*
+ * Memory structure includes region and mapping information.
+ */
+struct virtio_memory {
+ uint64_t base_address; /* Base QEMU userspace address of the memory file. */
+ uint64_t mapped_address; /* Mapped address of memory file base in our applications memory space. */
+ uint64_t mapped_size; /* Total size of memory file. */
+ uint32_t nregions; /* Number of memory regions. */
+ /* Number of memory regions for gpa to hpa translation. */
+ uint32_t nregions_hpa;
+ /* Memory region information for gpa to hpa translation. */
+ struct virtio_memory_regions_hpa *regions_hpa;
+ /* Memory region information. */
+ struct virtio_memory_regions regions[0];
+};
+
+/*
+ * Device operations to add/remove device.
+ */
+struct virtio_net_device_ops {
+ int (* new_device) (struct virtio_net *); /* Add device. */
+ void (* destroy_device) (volatile struct virtio_net *); /* Remove device. */
+};
+
+int init_virtio_net(struct virtio_net_device_ops const * const);
+int deinit_virtio_net(void);
+
+struct vhost_net_device_ops const * get_virtio_net_callbacks(void);
+
+#endif /* _VIRTIO_NET_H_ */
diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
new file mode 100644
index 0000000..78fce0d
--- /dev/null
+++ b/lib/librte_vhost/vhost_rxtx.c
@@ -0,0 +1,281 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <linux/virtio_net.h>
+
+#include <rte_mbuf.h>
+#include <rte_memcpy.h>
+#include <rte_virtio_net.h>
+
+#include "vhost-net-cdev.h"
+
+#define MAX_PKT_BURST 64
+#define MAX_MRG_PKT_BURST 64
+
+/*
+ * This function adds buffers to the virtio devices RX virtqueue. Buffers can
+ * be received from the physical port or from another virtio device. A packet
+ * count is returned to indicate the number of packets that were succesfully
+ * added to the RX queue. This function works when mergeable is disabled.
+ */
+static inline uint32_t __attribute__((always_inline))
+virtio_dev_rx(struct virtio_net *dev, struct rte_mbuf **pkts, uint32_t count)
+{
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ struct rte_mbuf *buff;
+ /* The virtio_hdr is initialised to 0. */
+ struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {{0,0,0,0,0,0},0};
+ uint64_t buff_addr = 0;
+ uint64_t buff_hdr_addr = 0;
+ uint32_t head[MAX_PKT_BURST], packet_len = 0;
+ uint32_t head_idx, packet_success = 0;
+ uint32_t retry = 0;
+ uint16_t avail_idx, res_cur_idx;
+ uint16_t res_base_idx, res_end_idx;
+ uint16_t free_entries;
+ uint8_t success = 0;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
+ vq = dev->virtqueue[VIRTIO_RXQ];
+ count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
+
+ /* As many data cores may want access to available buffers, they need to be reserved. */
+ do {
+ res_base_idx = vq->last_used_idx_res;
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ free_entries = (avail_idx - res_base_idx);
+ /* If retry is enabled and the queue is full then we wait and retry to avoid packet loss. */
+ if (enable_retry && unlikely(count > free_entries)) {
+ for (retry = 0; retry < burst_rx_retry_num; retry++) {
+ rte_delay_us(burst_rx_delay_time);
+ avail_idx =
+ *((volatile uint16_t *)&vq->avail->idx);
+ free_entries = (avail_idx - res_base_idx);
+ if (count <= free_entries)
+ break;
+ }
+ }
+
+ /*check that we have enough buffers*/
+ if (unlikely(count > free_entries))
+ count = free_entries;
+
+ if (count == 0)
+ return 0;
+
+ res_end_idx = res_base_idx + count;
+ /* vq->last_used_idx_res is atomically updated. */
+ success = rte_atomic16_cmpset(&vq->last_used_idx_res, res_base_idx,
+ res_end_idx);
+ } while (unlikely(success == 0));
+ res_cur_idx = res_base_idx;
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n", dev->device_fh, res_cur_idx, res_end_idx);
+
+ /* Prefetch available ring to retrieve indexes. */
+ rte_prefetch0(&vq->avail->ring[res_cur_idx & (vq->size - 1)]);
+
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (head_idx = 0; head_idx < count; head_idx++)
+ head[head_idx] = vq->avail->ring[(res_cur_idx + head_idx) & (vq->size - 1)];
+
+ /*Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+
+ while (res_cur_idx != res_end_idx) {
+ /* Get descriptor from available ring */
+ desc = &vq->desc[head[packet_success]];
+
+ buff = pkts[packet_success];
+
+ /* Convert from gpa to vva (guest physical addr -> vhost virtual addr) */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ /* Prefetch buffer address. */
+ rte_prefetch0((void*)(uintptr_t)buff_addr);
+
+ /* Copy virtio_hdr to packet and increment buffer address */
+ buff_hdr_addr = buff_addr;
+ packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
+
+ /*
+ * If the descriptors are chained the header and data are
+ * placed in separate buffers.
+ */
+ if (desc->flags & VRING_DESC_F_NEXT) {
+ desc->len = vq->vhost_hlen;
+ desc = &vq->desc[desc->next];
+ /* Buffer address translation. */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ desc->len = rte_pktmbuf_data_len(buff);
+ } else {
+ buff_addr += vq->vhost_hlen;
+ desc->len = packet_len;
+ }
+
+ /* Update used ring with desc information */
+ vq->used->ring[res_cur_idx & (vq->size - 1)].id = head[packet_success];
+ vq->used->ring[res_cur_idx & (vq->size - 1)].len = packet_len;
+
+ /* Copy mbuf data to buffer */
+ rte_memcpy((void *)(uintptr_t)buff_addr,
+ (const void *)buff->pkt.data,
+ rte_pktmbuf_data_len(buff));
+ PRINT_PACKET(dev, (uintptr_t)buff_addr,
+ rte_pktmbuf_data_len(buff), 0);
+
+ res_cur_idx++;
+ packet_success++;
+
+ rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
+ (const void *)&virtio_hdr, vq->vhost_hlen);
+
+ PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
+
+ if (res_cur_idx < res_end_idx) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ }
+ }
+
+ rte_compiler_barrier();
+
+ /* Wait until it's our turn to add our buffer to the used ring. */
+ while (unlikely(vq->last_used_idx != res_base_idx))
+ rte_pause();
+
+ *(volatile uint16_t *)&vq->used->idx += count;
+ vq->last_used_idx = res_end_idx;
+
+ /* Kick the guest if necessary. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+ return count;
+}
+
+
+static inline void __attribute__((always_inline))
+virtio_dev_tx(struct virtio_net* dev, struct rte_mempool *mbuf_pool)
+{
+ struct rte_mbuf m;
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ uint64_t buff_addr = 0;
+ uint32_t head[MAX_PKT_BURST];
+ uint32_t used_idx;
+ uint32_t i;
+ uint16_t free_entries, packet_success = 0;
+ uint16_t avail_idx;
+
+ vq = dev->virtqueue[VIRTIO_TXQ];
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ /* If there are no available buffers then return. */
+ if (vq->last_used_idx == avail_idx)
+ return;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
+
+ /* Prefetch available ring to retrieve head indexes. */
+ rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ /*get the number of free entries in the ring*/
+ free_entries = (avail_idx - vq->last_used_idx);
+
+ /* Limit to MAX_PKT_BURST. */
+ if (free_entries > MAX_PKT_BURST)
+ free_entries = MAX_PKT_BURST;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n", dev->device_fh, free_entries);
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (i = 0; i < free_entries; i++)
+ head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)];
+
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ while (packet_success < free_entries) {
+ desc = &vq->desc[head[packet_success]];
+
+ /* Discard first buffer as it is the virtio header */
+ desc = &vq->desc[desc->next];
+
+ /* Buffer address translation. */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ /* Prefetch buffer address. */
+ rte_prefetch0((void*)(uintptr_t)buff_addr);
+
+ used_idx = vq->last_used_idx & (vq->size - 1);
+
+ if (packet_success < (free_entries - 1)) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success+1]]);
+ rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]);
+ }
+
+ /* Update used index buffer information. */
+ vq->used->ring[used_idx].id = head[packet_success];
+ vq->used->ring[used_idx].len = 0;
+
+ /* Setup dummy mbuf. This is copied to a real mbuf if transmitted out the physical port. */
+ m.pkt.data_len = desc->len;
+ m.pkt.pkt_len = desc->len;
+ m.pkt.data = (void*)(uintptr_t)buff_addr;
+
+ PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
+
+ /* If this is the first received packet we need to learn the MAC and setup VMDQ */
+ if (dev->ready == DEVICE_MAC_LEARNING) {
+ if (dev->remove || (link_vmdq(dev, &m) == -1)) {
+ /*discard frame if device is scheduled for removal or a duplicate MAC address is found. */
+ packet_success += free_entries;
+ vq->last_used_idx += packet_success;
+ break;
+ }
+ }
+ virtio_tx_route(dev, &m, mbuf_pool, (uint16_t)dev->device_fh);
+
+ vq->last_used_idx++;
+ packet_success++;
+ }
+
+ rte_compiler_barrier();
+ vq->used->idx += packet_success;
+ /* Kick guest if required. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+}
+
+
diff --git a/lib/librte_vhost/virtio-net.h b/lib/librte_vhost/virtio-net.h
deleted file mode 100644
index 1a2f0dc..0000000
--- a/lib/librte_vhost/virtio-net.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _VIRTIO_NET_H_
-#define _VIRTIO_NET_H_
-
-/* Used to indicate that the device is running on a data core */
-#define VIRTIO_DEV_RUNNING 1
-
-/* Backend value set by guest. */
-#define VIRTIO_DEV_STOPPED -1
-
-#define PAGE_SIZE 4096
-
-/* Enum for virtqueue management. */
-enum {VIRTIO_RXQ, VIRTIO_TXQ, VIRTIO_QNUM};
-
-#define BUF_VECTOR_MAX 256
-
-/*
- * Structure contains buffer address, length and descriptor index
- * from vring to do scatter RX.
-*/
-struct buf_vector {
-uint64_t buf_addr;
-uint32_t buf_len;
-uint32_t desc_idx;
-};
-
-/*
- * Structure contains variables relevant to TX/RX virtqueues.
- */
-struct vhost_virtqueue
-{
- struct vring_desc *desc; /* Virtqueue descriptor ring. */
- struct vring_avail *avail; /* Virtqueue available ring. */
- struct vring_used *used; /* Virtqueue used ring. */
- uint32_t size; /* Size of descriptor ring. */
- uint32_t backend; /* Backend value to determine if device should started/stopped. */
- uint16_t vhost_hlen; /* Vhost header length (varies depending on RX merge buffers. */
- volatile uint16_t last_used_idx; /* Last index used on the available ring */
- volatile uint16_t last_used_idx_res; /* Used for multiple devices reserving buffers. */
- eventfd_t callfd; /* Currently unused as polling mode is enabled. */
- eventfd_t kickfd; /* Used to notify the guest (trigger interrupt). */
- /* Used for scatter RX. */
- struct buf_vector buf_vec[BUF_VECTOR_MAX];
-} __rte_cache_aligned;
-
-/*
- * Device structure contains all configuration information relating to the device.
- */
-struct virtio_net
-{
- struct vhost_virtqueue *virtqueue[VIRTIO_QNUM]; /* Contains all virtqueue information. */
- struct virtio_memory *mem; /* QEMU memory and memory region information. */
- struct ether_addr mac_address; /* Device MAC address (Obtained on first TX packet). */
- uint64_t features; /* Negotiated feature set. */
- uint64_t device_fh; /* device identifier. */
- uint32_t vmdq_rx_q; /* RX VMDQ queue number. */
- uint32_t flags; /* Device flags. Only used to check if device is running on data core. */
- uint32_t vlan_tag; /* Vlan tag for device. Currently set to device_id (0-63). */
- uint16_t coreid; /* Data core that the device is added to. */
- volatile uint8_t ready; /* A device is set as ready if the MAC address has been set. */
- volatile uint8_t remove; /* Device is marked for removal from the data core. */
-} __rte_cache_aligned;
-
-/*
- * Device linked list structure for configuration.
- */
-struct virtio_net_config_ll
-{
- struct virtio_net dev; /* Virtio device. */
- struct virtio_net_config_ll *next; /* Next entry on linked list. */
-};
-
-/*
- * Information relating to memory regions including offsets to addresses in QEMUs memory file.
- */
-struct virtio_memory_regions {
- uint64_t guest_phys_address; /* Base guest physical address of region. */
- uint64_t guest_phys_address_end; /* End guest physical address of region. */
- uint64_t memory_size; /* Size of region. */
- uint64_t userspace_address; /* Base userspace address of region. */
- uint64_t address_offset; /* Offset of region for address translation. */
-};
-
-/*
- * Information relating to memory regions including offsets to
- * addresses in host physical space.
- */
-struct virtio_memory_regions_hpa {
- /* Base guest physical address of region. */
- uint64_t guest_phys_address;
- /* End guest physical address of region. */
- uint64_t guest_phys_address_end;
- /* Size of region. */
- uint64_t memory_size;
- /* Offset of region for gpa to hpa translation. */
- uint64_t host_phys_addr_offset;
-};
-
-/*
- * Memory structure includes region and mapping information.
- */
-struct virtio_memory {
- uint64_t base_address; /* Base QEMU userspace address of the memory file. */
- uint64_t mapped_address; /* Mapped address of memory file base in our applications memory space. */
- uint64_t mapped_size; /* Total size of memory file. */
- uint32_t nregions; /* Number of memory regions. */
- /* Number of memory regions for gpa to hpa translation. */
- uint32_t nregions_hpa;
- /* Memory region information for gpa to hpa translation. */
- struct virtio_memory_regions_hpa *regions_hpa;
- /* Memory region information. */
- struct virtio_memory_regions regions[0];
-};
-
-/*
- * Device operations to add/remove device.
- */
-struct virtio_net_device_ops {
- int (* new_device) (struct virtio_net *); /* Add device. */
- void (* destroy_device) (volatile struct virtio_net *); /* Remove device. */
-};
-
-int init_virtio_net(struct virtio_net_device_ops const * const);
-int deinit_virtio_net(void);
-
-struct vhost_net_device_ops const * get_virtio_net_callbacks(void);
-
-#endif /* _VIRTIO_NET_H_ */
--
1.8.1.4
^ permalink raw reply [flat|nested] 14+ messages in thread