DPDK patches and discussions
 help / color / mirror / Atom feed
From: "He, Shaopeng" <shaopeng.he@intel.com>
To: "Lu, Wenzhuo" <wenzhuo.lu@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v4 5/7] lib/librte_ether: support new l2 tunnel	operation
Date: Fri, 4 Mar 2016 01:47:22 +0000	[thread overview]
Message-ID: <FB82FCC69332B84596FE0CEC3C131094C23D58@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <1455763573-2867-6-git-send-email-wenzhuo.lu@intel.com>

Hi Wenzhuo,

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wenzhuo Lu
> Sent: Thursday, February 18, 2016 10:46 AM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v4 5/7] lib/librte_ether: support new l2 tunnel
> operation
> 
> Add functions to support the new l2 tunnel operation.
> 1, Insertion and stripping for l2 tunnel tag.
> 2, Forwarding the packets to a pool based on l2 tunnel tag.
> 
> Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
> ---
>  lib/librte_ether/rte_ethdev.c | 183
> ++++++++++++++++++++++++++++++++++++
>  lib/librte_ether/rte_ethdev.h | 214
> ++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 397 insertions(+)
> 
> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> index c5c12cb..6bc19d4 100644
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -3298,3 +3298,186 @@ rte_eth_dev_l2_tunnel_disable(uint8_t port_id,
>  				-ENOTSUP);
>  	return (*dev->dev_ops->l2_tunnel_disable)(dev, l2_tunnel_type);  }
> +
> +int
> +rte_eth_dev_l2_tunnel_insertion_enable(uint8_t port_id,
> +				       struct rte_eth_l2_tunnel *l2_tunnel,
> +				       uint16_t vf_id)
> +{
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +	if (l2_tunnel == NULL) {
> +		RTE_PMD_DEBUG_TRACE("Invalid l2_tunnel parameter\n");
> +		return -EINVAL;
> +	}
> +
> +	if (l2_tunnel->l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {

How about the value of RTE_L2_TUNNEL_TYPE_NONE here, is it an invalid type too?

> +		RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
> +		return -EINVAL;
> +	}
> +
> +	dev = &rte_eth_devices[port_id];
> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops-
> >l2_tunnel_insertion_enable,
> +				-ENOTSUP);
> +	return (*dev->dev_ops->l2_tunnel_insertion_enable)(dev,
> +							   l2_tunnel,
> +							   vf_id);
> +}
> +
> +int
> +rte_eth_dev_l2_tunnel_insertion_disable(uint8_t port_id,
> +					enum rte_eth_l2_tunnel_type
> +						l2_tunnel_type,
> +					uint16_t vf_id)
> +{
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> +	if (l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
> +		RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
> +		return -EINVAL;
> +	}
> +
> +	dev = &rte_eth_devices[port_id];
> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops-
> >l2_tunnel_insertion_disable,
> +				-ENOTSUP);
> +	return (*dev->dev_ops->l2_tunnel_insertion_disable)(dev,
> +							    l2_tunnel_type,
> +							    vf_id);
> +}
> +
> +int
> +rte_eth_dev_l2_tunnel_stripping_enable(uint8_t port_id,
> +				       enum rte_eth_l2_tunnel_type
> +					       l2_tunnel_type)
> +{
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> +	if (l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
> +		RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
> +		return -EINVAL;
> +	}
> +
> +	dev = &rte_eth_devices[port_id];
> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops-
> >l2_tunnel_stripping_enable,
> +				-ENOTSUP);
> +	return (*dev->dev_ops->l2_tunnel_stripping_enable)(dev,
> +							   l2_tunnel_type);
> +}
> +
> +int
> +rte_eth_dev_l2_tunnel_stripping_disable(uint8_t port_id,
> +					 enum rte_eth_l2_tunnel_type
> +						 l2_tunnel_type)
> +{
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> +	if (l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
> +		RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
> +		return -EINVAL;
> +	}
> +
> +	dev = &rte_eth_devices[port_id];
> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops-
> >l2_tunnel_stripping_disable,
> +				-ENOTSUP);
> +	return (*dev->dev_ops->l2_tunnel_stripping_disable)(dev,
> +							    l2_tunnel_type);
> +}
> +
> +int
> +rte_eth_dev_l2_tunnel_forwarding_enable(uint8_t port_id,
> +					 enum rte_eth_l2_tunnel_type
> +						 l2_tunnel_type)
> +{
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> +	if (l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
> +		RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
> +		return -EINVAL;
> +	}
> +
> +	dev = &rte_eth_devices[port_id];
> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops-
> >l2_tunnel_forwarding_enable,
> +				-ENOTSUP);
> +	return (*dev->dev_ops->l2_tunnel_forwarding_enable)(dev,
> +							    l2_tunnel_type);
> +}
> +
> +int
> +rte_eth_dev_l2_tunnel_forwarding_disable(uint8_t port_id,
> +					 enum rte_eth_l2_tunnel_type
> +						 l2_tunnel_type)
> +{
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> +	if (l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
> +		RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
> +		return -EINVAL;
> +	}
> +
> +	dev = &rte_eth_devices[port_id];
> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops-
> >l2_tunnel_forwarding_disable,
> +				-ENOTSUP);
> +	return (*dev->dev_ops->l2_tunnel_forwarding_disable)(dev,
> +							     l2_tunnel_type);
> +}
> +
> +int
> +rte_eth_dev_l2_tunnel_filter_add(uint8_t port_id,
> +				 struct rte_eth_l2_tunnel *l2_tunnel,
> +				 uint32_t pool)
> +{
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +	if (l2_tunnel == NULL) {
> +		RTE_PMD_DEBUG_TRACE("Invalid l2_tunnel parameter\n");
> +		return -EINVAL;
> +	}
> +
> +	if (l2_tunnel->l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
> +		RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
> +		return -EINVAL;
> +	}
> +
> +	dev = &rte_eth_devices[port_id];
> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops-
> >l2_tunnel_filter_add,
> +				-ENOTSUP);
> +	return (*dev->dev_ops->l2_tunnel_filter_add)(dev,
> +						     l2_tunnel,
> +						     pool);
> +}
> +
> +int
> +rte_eth_dev_l2_tunnel_filter_del(uint8_t port_id,
> +				 struct rte_eth_l2_tunnel *l2_tunnel) {
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +	if (l2_tunnel == NULL) {
> +		RTE_PMD_DEBUG_TRACE("Invalid l2_tunnel parameter\n");
> +		return -EINVAL;
> +	}
> +
> +	if (l2_tunnel->l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
> +		RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
> +		return -EINVAL;
> +	}
> +
> +	dev = &rte_eth_devices[port_id];
> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->l2_tunnel_filter_del,
> +				-ENOTSUP);
> +	return (*dev->dev_ops->l2_tunnel_filter_del)(dev,
> +						     l2_tunnel);
> +}
> diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
> index 709485a..d482f8c 100644
> --- a/lib/librte_ether/rte_ethdev.h
> +++ b/lib/librte_ether/rte_ethdev.h
> @@ -963,6 +963,7 @@ TAILQ_HEAD(rte_eth_dev_cb_list,
> rte_eth_dev_callback);  struct rte_eth_l2_tunnel {
>  	enum rte_eth_l2_tunnel_type l2_tunnel_type;
>  	uint16_t ether_type;
> +	uint32_t tunnel_id; /* port tag id for e-tag */
>  };
> 
>  /*
> @@ -1283,6 +1284,45 @@ typedef int (*eth_l2_tunnel_disable_t)
>  	 enum rte_eth_l2_tunnel_type l2_tunnel_type);  /**< @internal
> disable a type of l2 tunnel */
> 
> +typedef int (*eth_l2_tunnel_insertion_enable_t)
> +	(struct rte_eth_dev *dev,
> +	 struct rte_eth_l2_tunnel *l2_tunnel,
> +	 uint16_t vf_id);
> +/**< @internal enable insertion of l2 tunnel tag */
> +
> +typedef int (*eth_l2_tunnel_insertion_disable_t)
> +	(struct rte_eth_dev *dev,
> +	 enum rte_eth_l2_tunnel_type l2_tunnel_type,
> +	 uint16_t vf_id);
> +/**< @internal disable insertion of l2 tunnel tag */
> +
> +typedef int (*eth_l2_tunnel_stripping_enable_t)
> +	(struct rte_eth_dev *dev, enum rte_eth_l2_tunnel_type
> l2_tunnel_type);
> +/**< @internal enable stripping of l2 tunnel tag */
> +
> +typedef int (*eth_l2_tunnel_stripping_disable_t)
> +	(struct rte_eth_dev *dev, enum rte_eth_l2_tunnel_type
> l2_tunnel_type);
> +/**< @internal disable stripping of l2 tunnel tag */
> +
> +typedef int (*eth_l2_tunnel_forwarding_enable_t)
> +	(struct rte_eth_dev *dev,
> +	 enum rte_eth_l2_tunnel_type l2_tunnel_type); /**< @internal
> enable
> +forwarding of l2 tunnel packets */
> +
> +typedef int (*eth_l2_tunnel_forwarding_disable_t)
> +	(struct rte_eth_dev *dev,
> +	 enum rte_eth_l2_tunnel_type l2_tunnel_type); /**< @internal
> disable
> +forwarding of l2 tunnel packets */
> +
> +typedef int (*eth_l2_tunnel_filter_add_t)(struct rte_eth_dev *dev,
> +					  struct rte_eth_l2_tunnel *l2_tunnel,
> +					  uint32_t pool);
> +/**< @internal add filter of l2 tunnel packets */
> +
> +typedef int (*eth_l2_tunnel_filter_del_t)(struct rte_eth_dev *dev,
> +					  struct rte_eth_l2_tunnel
> *l2_tunnel); /**< @internal delete
> +filter of l2 tunnel packets */
> +
>  #ifdef RTE_NIC_BYPASS
> 
>  enum {
> @@ -1471,6 +1511,22 @@ struct eth_dev_ops {
>  	eth_l2_tunnel_enable_t l2_tunnel_enable;
>  	/** Disable a type of l2 tunnel */
>  	eth_l2_tunnel_disable_t l2_tunnel_disable;
> +	/** Enable insertion of l2 tunnel tag */
> +	eth_l2_tunnel_insertion_enable_t l2_tunnel_insertion_enable;
> +	/** Disable insertion of l2 tunnel tag */
> +	eth_l2_tunnel_insertion_disable_t l2_tunnel_insertion_disable;
> +	/** Enable stripping of l2 tunnel tag */
> +	eth_l2_tunnel_stripping_enable_t l2_tunnel_stripping_enable;
> +	/** Disable stripping of l2 tunnel tag */
> +	eth_l2_tunnel_stripping_disable_t l2_tunnel_stripping_disable;
> +	/** Enable forwarding of l2 tunnel packets */
> +	eth_l2_tunnel_forwarding_enable_t l2_tunnel_forwarding_enable;
> +	/** Disable forwarding of l2 tunnel packets */
> +	eth_l2_tunnel_forwarding_disable_t l2_tunnel_forwarding_disable;
> +	/** Add filter of l2 tunnel packets */
> +	eth_l2_tunnel_filter_add_t l2_tunnel_filter_add;
> +	/** Delete filter of l2 tunnel packets */
> +	eth_l2_tunnel_filter_del_t l2_tunnel_filter_del;
>  };
> 
>  /**
> @@ -3964,6 +4020,164 @@ int
>  rte_eth_dev_l2_tunnel_disable(uint8_t port_id,
>  			      enum rte_eth_l2_tunnel_type l2_tunnel_type);
> 
> + /**
> + * Enable l2 tunnel tag insertion of an Ethernet device for specific
> + * tunnel packets by ether type.
> + *
> + * @param port_id
> + *   The port identifier of the Ethernet device.
> + * @param l2_tunnel
> + *   l2 tunnel configuration.
> + * @param vf_id
> + *   vf id.
> + *
> + * @return
> + *   - (0) if successful.
> + *   - (-ENODEV) if port identifier is invalid.
> + *   - (-ENOTSUP) if hardware doesn't support tunnel type.
> + */
> +int
> +rte_eth_dev_l2_tunnel_insertion_enable(uint8_t port_id,
> +				       struct rte_eth_l2_tunnel *l2_tunnel,
> +				       uint16_t vf_id);
> +
> + /**
> + * Disable l2 tunnel tag insertion of an Ethernet device for specific
> + * tunnel packets by ether type.
> + *
> + * @param port_id
> + *   The port identifier of the Ethernet device.
> + * @param l2_tunnel_type
> + *   l2 tunnel type.
> + * @param vf_id
> + *   vf id.
> + *
> + * @return
> + *   - (0) if successful.
> + *   - (-ENODEV) if port identifier is invalid.
> + *   - (-ENOTSUP) if hardware doesn't support tunnel type.
> + */
> +int
> +rte_eth_dev_l2_tunnel_insertion_disable
> +	(uint8_t port_id,
> +	 enum rte_eth_l2_tunnel_type l2_tunnel_type,
> +	 uint16_t vf_id);
> +
> + /**
> + * Enable l2 tunnel tag stripping of an Ethernet device for specific
> + * tunnel packets by ether type.
> + *
> + * @param port_id
> + *   The port identifier of the Ethernet device.
> + * @param l2_tunnel_type
> + *   l2 tunnel type.
> + *
> + * @return
> + *   - (0) if successful.
> + *   - (-ENODEV) if port identifier is invalid.
> + *   - (-ENOTSUP) if hardware doesn't support tunnel type.
> + */
> +int
> +rte_eth_dev_l2_tunnel_stripping_enable
> +	(uint8_t port_id,
> +	 enum rte_eth_l2_tunnel_type l2_tunnel_type);
> +
> + /**
> + * Disable l2 tunnel tag stripping of an Ethernet device for specific
> + * tunnel packets by ether type.
> + *
> + * @param port_id
> + *   The port identifier of the Ethernet device.
> + * @param l2_tunnel_type
> + *   l2 tunnel type.
> + *
> + * @return
> + *   - (0) if successful.
> + *   - (-ENODEV) if port identifier is invalid.
> + *   - (-ENOTSUP) if hardware doesn't support tunnel type.
> + */
> +int
> +rte_eth_dev_l2_tunnel_stripping_disable
> +	(uint8_t port_id,
> +	 enum rte_eth_l2_tunnel_type l2_tunnel_type);
> +
> + /**
> + * Enable l2 tunnel tag forwarding of an Ethernet device for specific
> + * tunnel packets by ether type.
> + *
> + * @param port_id
> + *   The port identifier of the Ethernet device.
> + * @param l2_tunnel_type
> + *   l2 tunnel type.
> + *
> + * @return
> + *   - (0) if successful.
> + *   - (-ENODEV) if port identifier is invalid.
> + *   - (-ENOTSUP) if hardware doesn't support tunnel type.
> + */
> +int
> +rte_eth_dev_l2_tunnel_forwarding_enable
> +	(uint8_t port_id,
> +	 enum rte_eth_l2_tunnel_type l2_tunnel_type);
> +
> + /**
> + * Disable l2 tunnel tag forwarding of an Ethernet device for specific
> + * tunnel packets by ether type.
> + *
> + * @param port_id
> + *   The port identifier of the Ethernet device.
> + * @param l2_tunnel_type
> + *   l2 tunnel type.
> + *
> + * @return
> + *   - (0) if successful.
> + *   - (-ENODEV) if port identifier is invalid.
> + *   - (-ENOTSUP) if hardware doesn't support tunnel type.
> + */
> +int
> +rte_eth_dev_l2_tunnel_forwarding_disable
> +	(uint8_t port_id,
> +	 enum rte_eth_l2_tunnel_type l2_tunnel_type);
> +
> + /**
> + * Add a filter for packet forwarding based on l2 tunnel tag of an
> +Ethernet
> + * device for specific tunnel packets.
> + *
> + * @param port_id
> + *   The port identifier of the Ethernet device.
> + * @param l2_tunnel
> + *   l2 tunnel configuration.
> + * @param pool
> + *   Destination pool.
> + *
> + * @return
> + *   - (0) if successful.
> + *   - (-ENODEV) if port identifier is invalid.
> + *   - (-ENOTSUP) if hardware doesn't support tunnel type.
> + */
> +int
> +rte_eth_dev_l2_tunnel_filter_add(uint8_t port_id,
> +				 struct rte_eth_l2_tunnel *l2_tunnel,
> +				 uint32_t pool);
> +
> + /**
> + * Delete a filter for packet forwarding based on l2 tunnel tag of an
> +Ethernet
> + * device for specific tunnel packets.
> + *
> + * @param port_id
> + *   The port identifier of the Ethernet device.
> + * @param l2_tunnel
> + *   l2 tunnel configuration.
> + *
> + * @return
> + *   - (0) if successful.
> + *   - (-ENODEV) if port identifier is invalid.
> + *   - (-ENOTSUP) if hardware doesn't support tunnel type.
> + */
> +int
> +rte_eth_dev_l2_tunnel_filter_del(uint8_t port_id,
> +				 struct rte_eth_l2_tunnel *l2_tunnel);
> +
>  #ifdef __cplusplus
>  }
>  #endif
> --
> 1.9.3

  reply	other threads:[~2016-03-04  1:47 UTC|newest]

Thread overview: 95+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-29  7:03 [dpdk-dev] [PATCH 0/8] support E-tag offloading and forwarding on Intel X550 NIC Wenzhuo Lu
2016-01-29  7:03 ` [dpdk-dev] [PATCH 1/8] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-01-29  7:03 ` [dpdk-dev] [PATCH 2/8] lib/librte_ether: support l2 tunnel config Wenzhuo Lu
2016-01-29  7:03 ` [dpdk-dev] [PATCH 3/8] ixgbe: " Wenzhuo Lu
2016-01-29  7:03 ` [dpdk-dev] [PATCH 4/8] app/testpmd: add CLIs for " Wenzhuo Lu
2016-01-29  7:03 ` [dpdk-dev] [PATCH 5/8] lib/librte_ether: support new l2 tunnel operation Wenzhuo Lu
2016-01-29  7:03 ` [dpdk-dev] [PATCH 6/8] ixgbe: support " Wenzhuo Lu
2016-01-29  7:03 ` [dpdk-dev] [PATCH 7/8] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-01-29  7:03 ` [dpdk-dev] [PATCH 8/8] doc: add release note for E-tag Wenzhuo Lu
2016-02-01 16:15   ` Mcnamara, John
2016-01-29  7:16 ` [dpdk-dev] [PATCH 0/8] support E-tag offloading and forwarding on Intel X550 NIC Qiu, Michael
2016-02-01  1:04   ` Lu, Wenzhuo
2016-02-01  1:39     ` Yuanhan Liu
2016-02-01  1:56       ` Lu, Wenzhuo
2016-02-01  2:06         ` Yuanhan Liu
2016-02-01  3:00           ` Lu, Wenzhuo
2016-02-01  8:31       ` Qiu, Michael
2016-02-02  1:24         ` Lu, Wenzhuo
2016-02-02  6:56 ` [dpdk-dev] [PATCH v2 0/7] " Wenzhuo Lu
2016-02-02  6:56   ` [dpdk-dev] [PATCH v2 1/7] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-02-02  6:57   ` [dpdk-dev] [PATCH v2 2/7] lib/librte_ether: support l2 tunnel config Wenzhuo Lu
2016-02-02 12:03     ` Bruce Richardson
2016-02-03  1:05       ` Lu, Wenzhuo
2016-02-03  3:36     ` Stephen Hemminger
2016-02-03  8:08       ` Lu, Wenzhuo
2016-02-02  6:57   ` [dpdk-dev] [PATCH v2 3/7] ixgbe: " Wenzhuo Lu
2016-02-02  6:57   ` [dpdk-dev] [PATCH v2 4/7] app/testpmd: add CLIs for " Wenzhuo Lu
2016-02-02  6:57   ` [dpdk-dev] [PATCH v2 5/7] lib/librte_ether: support new l2 tunnel operation Wenzhuo Lu
2016-02-02  6:57   ` [dpdk-dev] [PATCH v2 6/7] ixgbe: support " Wenzhuo Lu
2016-02-02  6:57   ` [dpdk-dev] [PATCH v2 7/7] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-02-12 13:50   ` [dpdk-dev] [PATCH v2 0/7] support E-tag offloading and forwarding on Intel X550 NIC De Lara Guarch, Pablo
2016-02-15  1:21     ` Lu, Wenzhuo
2016-02-15  9:39       ` De Lara Guarch, Pablo
2016-02-16  8:20 ` [dpdk-dev] [PATCH v3 " Wenzhuo Lu
2016-02-16  8:20   ` [dpdk-dev] [PATCH v3 1/7] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-02-16  8:20   ` [dpdk-dev] [PATCH v3 2/7] lib/librte_ether: support l2 tunnel config Wenzhuo Lu
2016-02-16  8:20   ` [dpdk-dev] [PATCH v3 3/7] ixgbe: " Wenzhuo Lu
2016-02-16  8:20   ` [dpdk-dev] [PATCH v3 4/7] app/testpmd: add CLIs for " Wenzhuo Lu
2016-02-16  8:20   ` [dpdk-dev] [PATCH v3 5/7] lib/librte_ether: support new l2 tunnel operation Wenzhuo Lu
2016-02-16  8:20   ` [dpdk-dev] [PATCH v3 6/7] ixgbe: support " Wenzhuo Lu
2016-02-16  8:20   ` [dpdk-dev] [PATCH v3 7/7] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-02-18  2:46 ` [dpdk-dev] [PATCH v4 0/7] support E-tag offloading and forwarding on Intel X550 NIC Wenzhuo Lu
2016-02-18  2:46   ` [dpdk-dev] [PATCH v4 1/7] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-02-18  2:46   ` [dpdk-dev] [PATCH v4 2/7] lib/librte_ether: support l2 tunnel config Wenzhuo Lu
2016-02-18  2:46   ` [dpdk-dev] [PATCH v4 3/7] ixgbe: " Wenzhuo Lu
2016-03-04  1:47     ` He, Shaopeng
2016-03-04  3:17       ` Lu, Wenzhuo
2016-02-18  2:46   ` [dpdk-dev] [PATCH v4 4/7] app/testpmd: add CLIs for " Wenzhuo Lu
2016-02-18  2:46   ` [dpdk-dev] [PATCH v4 5/7] lib/librte_ether: support new l2 tunnel operation Wenzhuo Lu
2016-03-04  1:47     ` He, Shaopeng [this message]
2016-03-04  3:31       ` Lu, Wenzhuo
2016-03-07  2:04         ` He, Shaopeng
2016-02-18  2:46   ` [dpdk-dev] [PATCH v4 6/7] ixgbe: support " Wenzhuo Lu
2016-03-04  1:46     ` He, Shaopeng
2016-03-04  3:15       ` Lu, Wenzhuo
2016-02-18  2:46   ` [dpdk-dev] [PATCH v4 7/7] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-03-04  1:46     ` He, Shaopeng
2016-03-04  3:11       ` Lu, Wenzhuo
2016-03-04  9:23   ` [dpdk-dev] [PATCH v4 0/7] support E-tag offloading and forwarding on Intel X550 NIC Liu, Yong
2016-03-07  2:42 ` [dpdk-dev] [PATCH v5 0/7] support E-tag offloading and forwarding on X550 Wenzhuo Lu
2016-03-07  2:42   ` [dpdk-dev] [PATCH v5 1/7] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-03-07  2:42   ` [dpdk-dev] [PATCH v5 2/7] lib/librte_ether: support l2 tunnel config Wenzhuo Lu
2016-03-07  2:42   ` [dpdk-dev] [PATCH v5 3/7] ixgbe: " Wenzhuo Lu
2016-03-07  2:42   ` [dpdk-dev] [PATCH v5 4/7] app/testpmd: add CLIs for " Wenzhuo Lu
2016-03-07  2:42   ` [dpdk-dev] [PATCH v5 5/7] lib/librte_ether: support new l2 tunnel operation Wenzhuo Lu
2016-03-07  3:29     ` Wu, Jingjing
2016-03-07  5:29       ` Lu, Wenzhuo
2016-03-07  2:42   ` [dpdk-dev] [PATCH v5 6/7] ixgbe: support " Wenzhuo Lu
2016-03-07  2:42   ` [dpdk-dev] [PATCH v5 7/7] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-03-08  6:53 ` [dpdk-dev] [PATCH v6 0/5] support E-tag offloading and forwarding on X550 Wenzhuo Lu
2016-03-08  6:53   ` [dpdk-dev] [PATCH v6 1/5] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-03-08  6:53   ` [dpdk-dev] [PATCH v6 2/5] lib/librte_ether: support l2 tunnel operations Wenzhuo Lu
2016-03-09  0:14     ` Thomas Monjalon
2016-03-09  1:15       ` Lu, Wenzhuo
2016-03-09  9:27         ` Thomas Monjalon
2016-03-10  0:54           ` Lu, Wenzhuo
2016-03-08  6:53   ` [dpdk-dev] [PATCH v6 3/5] ixgbe: " Wenzhuo Lu
2016-03-08  6:53   ` [dpdk-dev] [PATCH v6 4/5] app/testpmd: add CLIs for l2 tunnel config Wenzhuo Lu
2016-03-08  6:53   ` [dpdk-dev] [PATCH v6 5/5] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-03-08  8:08   ` [dpdk-dev] [PATCH v6 0/5] support E-tag offloading and forwarding on X550 Wu, Jingjing
2016-03-09  7:44 ` [dpdk-dev] [PATCH v7 " Wenzhuo Lu
2016-03-09  7:44   ` [dpdk-dev] [PATCH v7 1/5] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-03-09  7:44   ` [dpdk-dev] [PATCH v7 2/5] lib/librte_ether: support l2 tunnel operations Wenzhuo Lu
2016-03-09  7:44   ` [dpdk-dev] [PATCH v7 3/5] ixgbe: " Wenzhuo Lu
2016-03-09  7:44   ` [dpdk-dev] [PATCH v7 4/5] app/testpmd: add CLIs for l2 tunnel config Wenzhuo Lu
2016-03-09  7:44   ` [dpdk-dev] [PATCH v7 5/5] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-03-09 10:07   ` [dpdk-dev] [PATCH v7 0/5] support E-tag offloading and forwarding on X550 Thomas Monjalon
2016-03-10  0:44     ` Lu, Wenzhuo
2016-03-11  1:10 ` [dpdk-dev] [PATCH v8 " Wenzhuo Lu
2016-03-11  1:10   ` [dpdk-dev] [PATCH v8 1/5] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-03-11  1:10   ` [dpdk-dev] [PATCH v8 2/5] lib/librte_ether: support l2 tunnel operations Wenzhuo Lu
2016-03-11  1:10   ` [dpdk-dev] [PATCH v8 3/5] ixgbe: " Wenzhuo Lu
2016-03-11  1:10   ` [dpdk-dev] [PATCH v8 4/5] app/testpmd: add CLIs for l2 tunnel config Wenzhuo Lu
2016-03-11  1:10   ` [dpdk-dev] [PATCH v8 5/5] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-03-11 22:27   ` [dpdk-dev] [PATCH v8 0/5] support E-tag offloading and forwarding on X550 Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=FB82FCC69332B84596FE0CEC3C131094C23D58@shsmsx102.ccr.corp.intel.com \
    --to=shaopeng.he@intel.com \
    --cc=dev@dpdk.org \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).