* [dpdk-dev] [PATCH 0/2] Introduces armada target @ 2019-05-17 21:27 lironh 2019-05-17 21:27 ` [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a lironh 2019-05-17 21:27 ` [dpdk-dev] [PATCH 2/2] meson: " lironh 0 siblings, 2 replies; 14+ messages in thread From: lironh @ 2019-05-17 21:27 UTC (permalink / raw) To: thomas; +Cc: dev, Liron Himi From: Liron Himi <lironh@marvell.com> Introduces armada target to address difference in number of cores, no numa support Liron Himi (2): mk: add Marvell ARMADA architecture based on armv8-a meson: add Marvell ARMADA architecture based on armv8-a config/arm/arm64_armada_linux_gcc | 16 ++++++++++++++++ config/arm/meson.build | 8 +++++++- config/defconfig_arm64-armada-linux-gcc | 24 ++++++++++++++++++++++++ config/defconfig_arm64-armada-linuxapp-gcc | 24 ++++++++++++++++++++++++ 4 files changed, 71 insertions(+), 1 deletion(-) create mode 100644 config/arm/arm64_armada_linux_gcc create mode 100644 config/defconfig_arm64-armada-linux-gcc create mode 100644 config/defconfig_arm64-armada-linuxapp-gcc -- 2.7.4 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a 2019-05-17 21:27 [dpdk-dev] [PATCH 0/2] Introduces armada target lironh @ 2019-05-17 21:27 ` lironh 2019-05-22 9:11 ` Ruifeng Wang (Arm Technology China) 2019-05-23 10:11 ` Ruifeng Wang (Arm Technology China) 2019-05-17 21:27 ` [dpdk-dev] [PATCH 2/2] meson: " lironh 1 sibling, 2 replies; 14+ messages in thread From: lironh @ 2019-05-17 21:27 UTC (permalink / raw) To: thomas; +Cc: dev, Liron Himi From: Liron Himi <lironh@marvell.com> This patch introduces armada target to address difference in number of cores, no numa support Change-Id: Ieaabe77b165000fe1280f98105329a0e63833b92 Signed-off-by: Liron Himi <lironh@marvell.com> Reviewed-by: Alan Winkowski Tested-by: Liron Himi --- config/defconfig_arm64-armada-linux-gcc | 24 ++++++++++++++++++++++++ config/defconfig_arm64-armada-linuxapp-gcc | 24 ++++++++++++++++++++++++ 2 files changed, 48 insertions(+) create mode 100644 config/defconfig_arm64-armada-linux-gcc create mode 100644 config/defconfig_arm64-armada-linuxapp-gcc diff --git a/config/defconfig_arm64-armada-linux-gcc b/config/defconfig_arm64-armada-linux-gcc new file mode 100644 index 0000000..573b278 --- /dev/null +++ b/config/defconfig_arm64-armada-linux-gcc @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2018 Marvell International Ltd +# + +#include "defconfig_arm64-armv8a-linux-gcc" + +CONFIG_RTE_LIBRTE_MVEP_COMMON=y +CONFIG_RTE_LIBRTE_MVPP2_PMD=y +CONFIG_RTE_LIBRTE_MVNETA_PMD=y +CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=y + +# +# Compile Environment Abstraction Layer +# +CONFIG_RTE_MAX_LCORE=16 +CONFIG_RTE_MAX_NUMA_NODES=1 +CONFIG_RTE_CACHE_LINE_SIZE=64 + +# Disable NXP as it is conflict with MUSDK +CONFIG_RTE_LIBRTE_DPAA_BUS=n + +# Doesn't support NUMA +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n +CONFIG_RTE_LIBRTE_VHOST_NUMA=n diff --git a/config/defconfig_arm64-armada-linuxapp-gcc b/config/defconfig_arm64-armada-linuxapp-gcc new file mode 100644 index 0000000..573b278 --- /dev/null +++ b/config/defconfig_arm64-armada-linuxapp-gcc @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2018 Marvell International Ltd +# + +#include "defconfig_arm64-armv8a-linux-gcc" + +CONFIG_RTE_LIBRTE_MVEP_COMMON=y +CONFIG_RTE_LIBRTE_MVPP2_PMD=y +CONFIG_RTE_LIBRTE_MVNETA_PMD=y +CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=y + +# +# Compile Environment Abstraction Layer +# +CONFIG_RTE_MAX_LCORE=16 +CONFIG_RTE_MAX_NUMA_NODES=1 +CONFIG_RTE_CACHE_LINE_SIZE=64 + +# Disable NXP as it is conflict with MUSDK +CONFIG_RTE_LIBRTE_DPAA_BUS=n + +# Doesn't support NUMA +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n +CONFIG_RTE_LIBRTE_VHOST_NUMA=n -- 2.7.4 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a 2019-05-17 21:27 ` [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a lironh @ 2019-05-22 9:11 ` Ruifeng Wang (Arm Technology China) 2019-05-22 9:12 ` Liron Himi 2019-05-23 10:11 ` Ruifeng Wang (Arm Technology China) 1 sibling, 1 reply; 14+ messages in thread From: Ruifeng Wang (Arm Technology China) @ 2019-05-22 9:11 UTC (permalink / raw) To: lironh, thomas; +Cc: dev, nd, nd Hi, > -----Original Message----- > From: dev <dev-bounces@dpdk.org> On Behalf Of lironh@marvell.com > Sent: Saturday, May 18, 2019 05:27 > To: thomas@monjalon.net > Cc: dev@dpdk.org; Liron Himi <lironh@marvell.com> > Subject: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture > based on armv8-a > > From: Liron Himi <lironh@marvell.com> > > This patch introduces armada target to address difference in number of cores, > no numa support > > Change-Id: Ieaabe77b165000fe1280f98105329a0e63833b92 > Signed-off-by: Liron Himi <lironh@marvell.com> > Reviewed-by: Alan Winkowski > Tested-by: Liron Himi > --- > config/defconfig_arm64-armada-linux-gcc | 24 > ++++++++++++++++++++++++ > config/defconfig_arm64-armada-linuxapp-gcc | 24 > ++++++++++++++++++++++++ > 2 files changed, 48 insertions(+) > create mode 100644 config/defconfig_arm64-armada-linux-gcc > create mode 100644 config/defconfig_arm64-armada-linuxapp-gcc > > diff --git a/config/defconfig_arm64-armada-linux-gcc > b/config/defconfig_arm64-armada-linux-gcc > new file mode 100644 > index 0000000..573b278 > --- /dev/null > +++ b/config/defconfig_arm64-armada-linux-gcc > @@ -0,0 +1,24 @@ > +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Marvell > +International Ltd # > + > +#include "defconfig_arm64-armv8a-linux-gcc" > + > +CONFIG_RTE_LIBRTE_MVEP_COMMON=y > +CONFIG_RTE_LIBRTE_MVPP2_PMD=y > +CONFIG_RTE_LIBRTE_MVNETA_PMD=y > +CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=y > + > +# > +# Compile Environment Abstraction Layer # > +CONFIG_RTE_MAX_LCORE=16 > +CONFIG_RTE_MAX_NUMA_NODES=1 > +CONFIG_RTE_CACHE_LINE_SIZE=64 > + > +# Disable NXP as it is conflict with MUSDK > CONFIG_RTE_LIBRTE_DPAA_BUS=n > + > +# Doesn't support NUMA > +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n > +CONFIG_RTE_LIBRTE_VHOST_NUMA=n > diff --git a/config/defconfig_arm64-armada-linuxapp-gcc > b/config/defconfig_arm64-armada-linuxapp-gcc > new file mode 100644 > index 0000000..573b278 > --- /dev/null > +++ b/config/defconfig_arm64-armada-linuxapp-gcc > @@ -0,0 +1,24 @@ > +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Marvell > +International Ltd # > + > +#include "defconfig_arm64-armv8a-linux-gcc" > + > +CONFIG_RTE_LIBRTE_MVEP_COMMON=y > +CONFIG_RTE_LIBRTE_MVPP2_PMD=y > +CONFIG_RTE_LIBRTE_MVNETA_PMD=y There is a note in MVPP2 PMD guide, " When MVPP2 PMD is enabled CONFIG_RTE_LIBRTE_MVNETA_PMD must be disabled ". I think this configuration conflicts with the guide. Does the guide need to be updated? > +CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=y > + > +# > +# Compile Environment Abstraction Layer # > +CONFIG_RTE_MAX_LCORE=16 > +CONFIG_RTE_MAX_NUMA_NODES=1 > +CONFIG_RTE_CACHE_LINE_SIZE=64 > + > +# Disable NXP as it is conflict with MUSDK > CONFIG_RTE_LIBRTE_DPAA_BUS=n > + > +# Doesn't support NUMA > +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n > +CONFIG_RTE_LIBRTE_VHOST_NUMA=n > -- > 2.7.4 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a 2019-05-22 9:11 ` Ruifeng Wang (Arm Technology China) @ 2019-05-22 9:12 ` Liron Himi 0 siblings, 0 replies; 14+ messages in thread From: Liron Himi @ 2019-05-22 9:12 UTC (permalink / raw) To: Ruifeng Wang (Arm Technology China), thomas; +Cc: dev, nd, nd, Liron Himi Hi, Regards, Liron -----Original Message----- From: Ruifeng Wang (Arm Technology China) <Ruifeng.Wang@arm.com> Sent: Wednesday, May 22, 2019 12:11 To: Liron Himi <lironh@marvell.com>; thomas@monjalon.net Cc: dev@dpdk.org; nd <nd@arm.com>; nd <nd@arm.com> Subject: [EXT] RE: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a External Email ---------------------------------------------------------------------- Hi, > -----Original Message----- > From: dev <dev-bounces@dpdk.org> On Behalf Of lironh@marvell.com > Sent: Saturday, May 18, 2019 05:27 > To: thomas@monjalon.net > Cc: dev@dpdk.org; Liron Himi <lironh@marvell.com> > Subject: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture > based on armv8-a > > From: Liron Himi <lironh@marvell.com> > > This patch introduces armada target to address difference in number of > cores, no numa support > > Change-Id: Ieaabe77b165000fe1280f98105329a0e63833b92 > Signed-off-by: Liron Himi <lironh@marvell.com> > Reviewed-by: Alan Winkowski > Tested-by: Liron Himi > --- > config/defconfig_arm64-armada-linux-gcc | 24 > ++++++++++++++++++++++++ > config/defconfig_arm64-armada-linuxapp-gcc | 24 > ++++++++++++++++++++++++ > 2 files changed, 48 insertions(+) > create mode 100644 config/defconfig_arm64-armada-linux-gcc > create mode 100644 config/defconfig_arm64-armada-linuxapp-gcc > > diff --git a/config/defconfig_arm64-armada-linux-gcc > b/config/defconfig_arm64-armada-linux-gcc > new file mode 100644 > index 0000000..573b278 > --- /dev/null > +++ b/config/defconfig_arm64-armada-linux-gcc > @@ -0,0 +1,24 @@ > +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Marvell > +International Ltd # > + > +#include "defconfig_arm64-armv8a-linux-gcc" > + > +CONFIG_RTE_LIBRTE_MVEP_COMMON=y > +CONFIG_RTE_LIBRTE_MVPP2_PMD=y > +CONFIG_RTE_LIBRTE_MVNETA_PMD=y > +CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=y > + > +# > +# Compile Environment Abstraction Layer # > +CONFIG_RTE_MAX_LCORE=16 > +CONFIG_RTE_MAX_NUMA_NODES=1 > +CONFIG_RTE_CACHE_LINE_SIZE=64 > + > +# Disable NXP as it is conflict with MUSDK > CONFIG_RTE_LIBRTE_DPAA_BUS=n > + > +# Doesn't support NUMA > +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n > +CONFIG_RTE_LIBRTE_VHOST_NUMA=n > diff --git a/config/defconfig_arm64-armada-linuxapp-gcc > b/config/defconfig_arm64-armada-linuxapp-gcc > new file mode 100644 > index 0000000..573b278 > --- /dev/null > +++ b/config/defconfig_arm64-armada-linuxapp-gcc > @@ -0,0 +1,24 @@ > +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Marvell > +International Ltd # > + > +#include "defconfig_arm64-armv8a-linux-gcc" > + > +CONFIG_RTE_LIBRTE_MVEP_COMMON=y > +CONFIG_RTE_LIBRTE_MVPP2_PMD=y > +CONFIG_RTE_LIBRTE_MVNETA_PMD=y There is a note in MVPP2 PMD guide, " When MVPP2 PMD is enabled CONFIG_RTE_LIBRTE_MVNETA_PMD must be disabled ". I think this configuration conflicts with the guide. Does the guide need to be updated? [L.H.] yes, I will submit another patch with documentation updates. > +CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=y > + > +# > +# Compile Environment Abstraction Layer # > +CONFIG_RTE_MAX_LCORE=16 > +CONFIG_RTE_MAX_NUMA_NODES=1 > +CONFIG_RTE_CACHE_LINE_SIZE=64 > + > +# Disable NXP as it is conflict with MUSDK > CONFIG_RTE_LIBRTE_DPAA_BUS=n > + > +# Doesn't support NUMA > +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n > +CONFIG_RTE_LIBRTE_VHOST_NUMA=n > -- > 2.7.4 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a 2019-05-17 21:27 ` [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a lironh 2019-05-22 9:11 ` Ruifeng Wang (Arm Technology China) @ 2019-05-23 10:11 ` Ruifeng Wang (Arm Technology China) 2019-05-23 10:51 ` Liron Himi 1 sibling, 1 reply; 14+ messages in thread From: Ruifeng Wang (Arm Technology China) @ 2019-05-23 10:11 UTC (permalink / raw) To: lironh, thomas; +Cc: dev, nd Hi Liron, > -----Original Message----- > From: dev <dev-bounces@dpdk.org> On Behalf Of lironh@marvell.com > Sent: Saturday, May 18, 2019 05:27 > To: thomas@monjalon.net > Cc: dev@dpdk.org; Liron Himi <lironh@marvell.com> > Subject: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture > based on armv8-a > > From: Liron Himi <lironh@marvell.com> > > This patch introduces armada target to address difference in number of cores, > no numa support > > Change-Id: Ieaabe77b165000fe1280f98105329a0e63833b92 > Signed-off-by: Liron Himi <lironh@marvell.com> > Reviewed-by: Alan Winkowski > Tested-by: Liron Himi > --- My local compilation on MacchiatoBin failed with the target. I have musdk-armada-18.09 checked out from https://github.com/MarvellEmbeddedProcessors/musdk-marvell.git LIBMUSDK_PATH was set before compiling. Hit errors as below: == Build drivers/net/mvneta CC mvneta_ethdev.o In file included from /home/arm/dpdk/drivers/net/mvneta/mvneta_rxtx.h:10:0, from /home/arm/dpdk/drivers/net/mvneta/mvneta_ethdev.c:25: /home/arm/dpdk/drivers/net/mvneta/mvneta_ethdev.h:24:29: fatal error: drivers/mv_neta.h: No such file or directory compilation terminated. /home/arm/dpdk/mk/internal/rte.compile-pre.mk:114: recipe for target 'mvneta_ethdev.o' failed I tried to copy the files from musdk to LIBMUSDK_PATH, but still cannot finish compiling. CC test_ipsec.o LD test /home/arm/dpdk/arm64-armada-linuxapp-gcc/lib/librte_pmd_mvneta.a(mvneta_ethdev.o): In function `mvneta_stats_get': mvneta_ethdev.c:(.text+0x1c4): undefined reference to `neta_ppio_get_statistics' /home/arm/dpdk/arm64-armada-linuxapp-gcc/lib/librte_pmd_mvneta.a(mvneta_ethdev.o): In function `mvneta_mtu_set': mvneta_ethdev.c:(.text+0x368): undefined reference to `neta_ppio_set_mru' mvneta_ethdev.c:(.text+0x37c): undefined reference to `neta_ppio_set_mtu' /home/arm/dpdk/arm64-armada-linuxapp-gcc/lib/librte_pmd_mvneta.a(mvneta_ethdev.o): In function `mvneta_promiscuous_disable': mvneta_ethdev.c:(.text+0x4e4): undefined reference to `neta_ppio_get_promisc' mvneta_ethdev.c:(.text+0x4f8): undefined reference to `neta_ppio_set_promisc' ...... My musdk repo is updated. Is anything else needed? Regards, /Ruifeng ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a 2019-05-23 10:11 ` Ruifeng Wang (Arm Technology China) @ 2019-05-23 10:51 ` Liron Himi 2019-05-24 1:10 ` Ruifeng Wang (Arm Technology China) 0 siblings, 1 reply; 14+ messages in thread From: Liron Himi @ 2019-05-23 10:51 UTC (permalink / raw) To: Ruifeng Wang (Arm Technology China), thomas; +Cc: dev, nd, Liron Himi Hi, This patch can only work with MUSDK newer than 18.09. Do you have access to a newer version? Regards, Liron -----Original Message----- From: Ruifeng Wang (Arm Technology China) <Ruifeng.Wang@arm.com> Sent: Thursday, May 23, 2019 13:11 To: Liron Himi <lironh@marvell.com>; thomas@monjalon.net Cc: dev@dpdk.org; nd <nd@arm.com> Subject: [EXT] RE: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a External Email ---------------------------------------------------------------------- Hi Liron, > -----Original Message----- > From: dev <dev-bounces@dpdk.org> On Behalf Of lironh@marvell.com > Sent: Saturday, May 18, 2019 05:27 > To: thomas@monjalon.net > Cc: dev@dpdk.org; Liron Himi <lironh@marvell.com> > Subject: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture > based on armv8-a > > From: Liron Himi <lironh@marvell.com> > > This patch introduces armada target to address difference in number of > cores, no numa support > > Change-Id: Ieaabe77b165000fe1280f98105329a0e63833b92 > Signed-off-by: Liron Himi <lironh@marvell.com> > Reviewed-by: Alan Winkowski > Tested-by: Liron Himi > --- My local compilation on MacchiatoBin failed with the target. I have musdk-armada-18.09 checked out from https://github.com/MarvellEmbeddedProcessors/musdk-marvell.git LIBMUSDK_PATH was set before compiling. Hit errors as below: == Build drivers/net/mvneta CC mvneta_ethdev.o In file included from /home/arm/dpdk/drivers/net/mvneta/mvneta_rxtx.h:10:0, from /home/arm/dpdk/drivers/net/mvneta/mvneta_ethdev.c:25: /home/arm/dpdk/drivers/net/mvneta/mvneta_ethdev.h:24:29: fatal error: drivers/mv_neta.h: No such file or directory compilation terminated. /home/arm/dpdk/mk/internal/rte.compile-pre.mk:114: recipe for target 'mvneta_ethdev.o' failed I tried to copy the files from musdk to LIBMUSDK_PATH, but still cannot finish compiling. CC test_ipsec.o LD test /home/arm/dpdk/arm64-armada-linuxapp-gcc/lib/librte_pmd_mvneta.a(mvneta_ethdev.o): In function `mvneta_stats_get': mvneta_ethdev.c:(.text+0x1c4): undefined reference to `neta_ppio_get_statistics' /home/arm/dpdk/arm64-armada-linuxapp-gcc/lib/librte_pmd_mvneta.a(mvneta_ethdev.o): In function `mvneta_mtu_set': mvneta_ethdev.c:(.text+0x368): undefined reference to `neta_ppio_set_mru' mvneta_ethdev.c:(.text+0x37c): undefined reference to `neta_ppio_set_mtu' /home/arm/dpdk/arm64-armada-linuxapp-gcc/lib/librte_pmd_mvneta.a(mvneta_ethdev.o): In function `mvneta_promiscuous_disable': mvneta_ethdev.c:(.text+0x4e4): undefined reference to `neta_ppio_get_promisc' mvneta_ethdev.c:(.text+0x4f8): undefined reference to `neta_ppio_set_promisc' ...... My musdk repo is updated. Is anything else needed? Regards, /Ruifeng ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a 2019-05-23 10:51 ` Liron Himi @ 2019-05-24 1:10 ` Ruifeng Wang (Arm Technology China) 2019-05-24 13:06 ` Ferruh Yigit 0 siblings, 1 reply; 14+ messages in thread From: Ruifeng Wang (Arm Technology China) @ 2019-05-24 1:10 UTC (permalink / raw) To: Liron Himi, thomas; +Cc: dev, nd, Gavin Hu (Arm Technology China), nd Hi, > -----Original Message----- > From: Liron Himi <lironh@marvell.com> > Sent: Thursday, May 23, 2019 18:51 > To: Ruifeng Wang (Arm Technology China) <Ruifeng.Wang@arm.com>; > thomas@monjalon.net > Cc: dev@dpdk.org; nd <nd@arm.com>; Liron Himi <lironh@marvell.com> > Subject: RE: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture > based on armv8-a > > Hi, > > This patch can only work with MUSDK newer than 18.09. > Do you have access to a newer version? Will newer MUSDK version available on github? I have no access to Marvell Extranet. > > Regards, > Liron > > -----Original Message----- > From: Ruifeng Wang (Arm Technology China) <Ruifeng.Wang@arm.com> > Sent: Thursday, May 23, 2019 13:11 > To: Liron Himi <lironh@marvell.com>; thomas@monjalon.net > Cc: dev@dpdk.org; nd <nd@arm.com> > Subject: [EXT] RE: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA > architecture based on armv8-a > > External Email > > ---------------------------------------------------------------------- > Hi Liron, > > > -----Original Message----- > > From: dev <dev-bounces@dpdk.org> On Behalf Of lironh@marvell.com > > Sent: Saturday, May 18, 2019 05:27 > > To: thomas@monjalon.net > > Cc: dev@dpdk.org; Liron Himi <lironh@marvell.com> > > Subject: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture > > based on armv8-a > > > > From: Liron Himi <lironh@marvell.com> > > > > This patch introduces armada target to address difference in number of > > cores, no numa support > > > > Change-Id: Ieaabe77b165000fe1280f98105329a0e63833b92 > > Signed-off-by: Liron Himi <lironh@marvell.com> > > Reviewed-by: Alan Winkowski > > Tested-by: Liron Himi > > --- > > My local compilation on MacchiatoBin failed with the target. > I have musdk-armada-18.09 checked out from > https://github.com/MarvellEmbeddedProcessors/musdk-marvell.git > LIBMUSDK_PATH was set before compiling. > Hit errors as below: > == Build drivers/net/mvneta > CC mvneta_ethdev.o > In file included from > /home/arm/dpdk/drivers/net/mvneta/mvneta_rxtx.h:10:0, > from > /home/arm/dpdk/drivers/net/mvneta/mvneta_ethdev.c:25: > /home/arm/dpdk/drivers/net/mvneta/mvneta_ethdev.h:24:29: > fatal error: drivers/mv_neta.h: No such file or directory > compilation terminated. > /home/arm/dpdk/mk/internal/rte.compile-pre.mk:114: recipe for > target 'mvneta_ethdev.o' failed > > I tried to copy the files from musdk to LIBMUSDK_PATH, but still cannot > finish compiling. > CC test_ipsec.o > LD test > /home/arm/dpdk/arm64-armada-linuxapp- > gcc/lib/librte_pmd_mvneta.a(mvneta_ethdev.o): In function > `mvneta_stats_get': > mvneta_ethdev.c:(.text+0x1c4): undefined reference to > `neta_ppio_get_statistics' > /home/arm/dpdk/arm64-armada-linuxapp- > gcc/lib/librte_pmd_mvneta.a(mvneta_ethdev.o): In function > `mvneta_mtu_set': > mvneta_ethdev.c:(.text+0x368): undefined reference to > `neta_ppio_set_mru' > mvneta_ethdev.c:(.text+0x37c): undefined reference to > `neta_ppio_set_mtu' > /home/arm/dpdk/arm64-armada-linuxapp- > gcc/lib/librte_pmd_mvneta.a(mvneta_ethdev.o): In function > `mvneta_promiscuous_disable': > mvneta_ethdev.c:(.text+0x4e4): undefined reference to > `neta_ppio_get_promisc' > mvneta_ethdev.c:(.text+0x4f8): undefined reference to > `neta_ppio_set_promisc' > ...... > > My musdk repo is updated. Is anything else needed? > > Regards, > /Ruifeng ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a 2019-05-24 1:10 ` Ruifeng Wang (Arm Technology China) @ 2019-05-24 13:06 ` Ferruh Yigit 2019-05-27 1:42 ` Ruifeng Wang (Arm Technology China) 0 siblings, 1 reply; 14+ messages in thread From: Ferruh Yigit @ 2019-05-24 13:06 UTC (permalink / raw) To: Ruifeng Wang (Arm Technology China), Liron Himi, thomas Cc: dev, nd, Gavin Hu (Arm Technology China) On 5/24/2019 2:10 AM, Ruifeng Wang (Arm Technology China) wrote: > Hi, > >> -----Original Message----- >> From: Liron Himi <lironh@marvell.com> >> Sent: Thursday, May 23, 2019 18:51 >> To: Ruifeng Wang (Arm Technology China) <Ruifeng.Wang@arm.com>; >> thomas@monjalon.net >> Cc: dev@dpdk.org; nd <nd@arm.com>; Liron Himi <lironh@marvell.com> >> Subject: RE: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture >> based on armv8-a >> >> Hi, >> >> This patch can only work with MUSDK newer than 18.09. >> Do you have access to a newer version? > > Will newer MUSDK version available on github? > I have no access to Marvell Extranet. +1, in github [1] latest branch I can see is 18.09 [1]: https://github.com/MarvellEmbeddedProcessors/musdk-marvell.git > >> >> Regards, >> Liron >> >> -----Original Message----- >> From: Ruifeng Wang (Arm Technology China) <Ruifeng.Wang@arm.com> >> Sent: Thursday, May 23, 2019 13:11 >> To: Liron Himi <lironh@marvell.com>; thomas@monjalon.net >> Cc: dev@dpdk.org; nd <nd@arm.com> >> Subject: [EXT] RE: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA >> architecture based on armv8-a >> >> External Email >> >> ---------------------------------------------------------------------- >> Hi Liron, >> >>> -----Original Message----- >>> From: dev <dev-bounces@dpdk.org> On Behalf Of lironh@marvell.com >>> Sent: Saturday, May 18, 2019 05:27 >>> To: thomas@monjalon.net >>> Cc: dev@dpdk.org; Liron Himi <lironh@marvell.com> >>> Subject: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture >>> based on armv8-a >>> >>> From: Liron Himi <lironh@marvell.com> >>> >>> This patch introduces armada target to address difference in number of >>> cores, no numa support >>> >>> Change-Id: Ieaabe77b165000fe1280f98105329a0e63833b92 >>> Signed-off-by: Liron Himi <lironh@marvell.com> >>> Reviewed-by: Alan Winkowski >>> Tested-by: Liron Himi >>> --- >> >> My local compilation on MacchiatoBin failed with the target. >> I have musdk-armada-18.09 checked out from >> https://github.com/MarvellEmbeddedProcessors/musdk-marvell.git >> LIBMUSDK_PATH was set before compiling. >> Hit errors as below: >> == Build drivers/net/mvneta >> CC mvneta_ethdev.o >> In file included from >> /home/arm/dpdk/drivers/net/mvneta/mvneta_rxtx.h:10:0, >> from >> /home/arm/dpdk/drivers/net/mvneta/mvneta_ethdev.c:25: >> /home/arm/dpdk/drivers/net/mvneta/mvneta_ethdev.h:24:29: >> fatal error: drivers/mv_neta.h: No such file or directory >> compilation terminated. >> /home/arm/dpdk/mk/internal/rte.compile-pre.mk:114: recipe for >> target 'mvneta_ethdev.o' failed >> >> I tried to copy the files from musdk to LIBMUSDK_PATH, but still cannot >> finish compiling. >> CC test_ipsec.o >> LD test >> /home/arm/dpdk/arm64-armada-linuxapp- >> gcc/lib/librte_pmd_mvneta.a(mvneta_ethdev.o): In function >> `mvneta_stats_get': >> mvneta_ethdev.c:(.text+0x1c4): undefined reference to >> `neta_ppio_get_statistics' >> /home/arm/dpdk/arm64-armada-linuxapp- >> gcc/lib/librte_pmd_mvneta.a(mvneta_ethdev.o): In function >> `mvneta_mtu_set': >> mvneta_ethdev.c:(.text+0x368): undefined reference to >> `neta_ppio_set_mru' >> mvneta_ethdev.c:(.text+0x37c): undefined reference to >> `neta_ppio_set_mtu' >> /home/arm/dpdk/arm64-armada-linuxapp- >> gcc/lib/librte_pmd_mvneta.a(mvneta_ethdev.o): In function >> `mvneta_promiscuous_disable': >> mvneta_ethdev.c:(.text+0x4e4): undefined reference to >> `neta_ppio_get_promisc' >> mvneta_ethdev.c:(.text+0x4f8): undefined reference to >> `neta_ppio_set_promisc' >> ...... >> >> My musdk repo is updated. Is anything else needed? >> >> Regards, >> /Ruifeng ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a 2019-05-24 13:06 ` Ferruh Yigit @ 2019-05-27 1:42 ` Ruifeng Wang (Arm Technology China) 0 siblings, 0 replies; 14+ messages in thread From: Ruifeng Wang (Arm Technology China) @ 2019-05-27 1:42 UTC (permalink / raw) To: Ferruh Yigit, Liron Himi, thomas Cc: dev, nd, Gavin Hu (Arm Technology China), nd > -----Original Message----- > From: Ferruh Yigit <ferruh.yigit@intel.com> > Sent: Friday, May 24, 2019 21:07 > To: Ruifeng Wang (Arm Technology China) <Ruifeng.Wang@arm.com>; Liron > Himi <lironh@marvell.com>; thomas@monjalon.net > Cc: dev@dpdk.org; nd <nd@arm.com>; Gavin Hu (Arm Technology China) > <Gavin.Hu@arm.com> > Subject: Re: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture > based on armv8-a > > On 5/24/2019 2:10 AM, Ruifeng Wang (Arm Technology China) wrote: > > Hi, > > > >> -----Original Message----- > >> From: Liron Himi <lironh@marvell.com> > >> Sent: Thursday, May 23, 2019 18:51 > >> To: Ruifeng Wang (Arm Technology China) <Ruifeng.Wang@arm.com>; > >> thomas@monjalon.net > >> Cc: dev@dpdk.org; nd <nd@arm.com>; Liron Himi <lironh@marvell.com> > >> Subject: RE: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA > >> architecture based on armv8-a > >> > >> Hi, > >> > >> This patch can only work with MUSDK newer than 18.09. > >> Do you have access to a newer version? > > > > Will newer MUSDK version available on github? > > I have no access to Marvell Extranet. > > +1, in github [1] latest branch I can see is 18.09 > > [1]: https://github.com/MarvellEmbeddedProcessors/musdk-marvell.git > With guide from Liron, I can build ARMADA target with MUSDK version 18.09 (after properly configured). Acked-by: Ruifeng Wang <ruifeng.wang@arm.com> ^ permalink raw reply [flat|nested] 14+ messages in thread
* [dpdk-dev] [PATCH 2/2] meson: add Marvell ARMADA architecture based on armv8-a 2019-05-17 21:27 [dpdk-dev] [PATCH 0/2] Introduces armada target lironh 2019-05-17 21:27 ` [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a lironh @ 2019-05-17 21:27 ` lironh 1 sibling, 0 replies; 14+ messages in thread From: lironh @ 2019-05-17 21:27 UTC (permalink / raw) To: thomas; +Cc: dev, Liron Himi From: Liron Himi <lironh@marvell.com> Change-Id: If210dbfeed447df3beffd53339a40e4a9069b6dc Signed-off-by: Liron Himi <lironh@marvell.com> Reviewed-by: Jerin Jacob Kollanukkaran <Jerin.Jacob@cavium.com> --- config/arm/arm64_armada_linux_gcc | 16 ++++++++++++++++ config/arm/meson.build | 8 +++++++- 2 files changed, 23 insertions(+), 1 deletion(-) create mode 100644 config/arm/arm64_armada_linux_gcc diff --git a/config/arm/arm64_armada_linux_gcc b/config/arm/arm64_armada_linux_gcc new file mode 100644 index 0000000..6e6d56f --- /dev/null +++ b/config/arm/arm64_armada_linux_gcc @@ -0,0 +1,16 @@ +[binaries] +c = 'aarch64-linux-gnu-gcc' +cpp = 'aarch64-linux-gnu-cpp' +ar = 'aarch64-linux-gnu-ar' +as = 'aarch64-linux-gnu-as' +strip = 'aarch64-linux-gnu-strip' +pcap-config = '' + +[host_machine] +system = 'linux' +cpu_family = 'aarch64' +cpu = 'armv8-a' +endian = 'little' + +[properties] +implementor_id = '0x56' diff --git a/config/arm/meson.build b/config/arm/meson.build index 7fa6ed3..32decba 100644 --- a/config/arm/meson.build +++ b/config/arm/meson.build @@ -56,6 +56,12 @@ flags_dpaa2 = [ ['RTE_MAX_NUMA_NODES', 1], ['RTE_MAX_LCORE', 16], ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false]] +flags_armada = [ + ['RTE_MACHINE', '"armv8a"'], + ['RTE_CACHE_LINE_SIZE', 64], + ['RTE_MAX_NUMA_NODES', 1], + ['RTE_MAX_LCORE', 16]] + flags_default_extra = [] flags_thunderx_extra = [ ['RTE_MACHINE', '"thunderx"'], @@ -104,7 +110,7 @@ impl_0x4e = ['NVIDIA', flags_generic, machine_args_generic] impl_0x50 = ['AppliedMicro', flags_generic, machine_args_generic] impl_0x51 = ['Qualcomm', flags_generic, machine_args_generic] impl_0x53 = ['Samsung', flags_generic, machine_args_generic] -impl_0x56 = ['Marvell', flags_generic, machine_args_generic] +impl_0x56 = ['Marvell ARMADA', flags_armada, machine_args_generic] impl_0x69 = ['Intel', flags_generic, machine_args_generic] impl_dpaa = ['NXP DPAA', flags_dpaa, machine_args_generic] impl_dpaa2 = ['NXP DPAA2', flags_dpaa2, machine_args_generic] -- 2.7.4 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [dpdk-dev] [PATCH 0/2] Introduces armada target @ 2019-05-17 21:34 lironh 2019-05-17 21:34 ` [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a lironh 0 siblings, 1 reply; 14+ messages in thread From: lironh @ 2019-05-17 21:34 UTC (permalink / raw) To: thomas; +Cc: dev, Liron Himi From: Liron Himi <lironh@marvell.com> Introduces armada target to address difference in number of cores, no numa support Liron Himi (2): mk: add Marvell ARMADA architecture based on armv8-a meson: add Marvell ARMADA architecture based on armv8-a config/arm/arm64_armada_linux_gcc | 16 ++++++++++++++++ config/arm/meson.build | 8 +++++++- config/defconfig_arm64-armada-linux-gcc | 24 ++++++++++++++++++++++++ config/defconfig_arm64-armada-linuxapp-gcc | 24 ++++++++++++++++++++++++ 4 files changed, 71 insertions(+), 1 deletion(-) create mode 100644 config/arm/arm64_armada_linux_gcc create mode 100644 config/defconfig_arm64-armada-linux-gcc create mode 100644 config/defconfig_arm64-armada-linuxapp-gcc -- 2.7.4 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a 2019-05-17 21:34 [dpdk-dev] [PATCH 0/2] Introduces armada target lironh @ 2019-05-17 21:34 ` lironh 2019-05-18 10:59 ` Jerin Jacob Kollanukkaran 2019-05-24 7:50 ` Ruifeng Wang (Arm Technology China) 0 siblings, 2 replies; 14+ messages in thread From: lironh @ 2019-05-17 21:34 UTC (permalink / raw) To: thomas; +Cc: dev, Liron Himi From: Liron Himi <lironh@marvell.com> This patch introduces armada target to address difference in number of cores, no numa support Signed-off-by: Liron Himi <lironh@marvell.com> Reviewed-by: Alan Winkowski <walan@marvell.com> Tested-by: Liron Himi <lironh@marvell.com> --- config/defconfig_arm64-armada-linux-gcc | 24 ++++++++++++++++++++++++ config/defconfig_arm64-armada-linuxapp-gcc | 24 ++++++++++++++++++++++++ 2 files changed, 48 insertions(+) create mode 100644 config/defconfig_arm64-armada-linux-gcc create mode 100644 config/defconfig_arm64-armada-linuxapp-gcc diff --git a/config/defconfig_arm64-armada-linux-gcc b/config/defconfig_arm64-armada-linux-gcc new file mode 100644 index 0000000..573b278 --- /dev/null +++ b/config/defconfig_arm64-armada-linux-gcc @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2018 Marvell International Ltd +# + +#include "defconfig_arm64-armv8a-linux-gcc" + +CONFIG_RTE_LIBRTE_MVEP_COMMON=y +CONFIG_RTE_LIBRTE_MVPP2_PMD=y +CONFIG_RTE_LIBRTE_MVNETA_PMD=y +CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=y + +# +# Compile Environment Abstraction Layer +# +CONFIG_RTE_MAX_LCORE=16 +CONFIG_RTE_MAX_NUMA_NODES=1 +CONFIG_RTE_CACHE_LINE_SIZE=64 + +# Disable NXP as it is conflict with MUSDK +CONFIG_RTE_LIBRTE_DPAA_BUS=n + +# Doesn't support NUMA +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n +CONFIG_RTE_LIBRTE_VHOST_NUMA=n diff --git a/config/defconfig_arm64-armada-linuxapp-gcc b/config/defconfig_arm64-armada-linuxapp-gcc new file mode 100644 index 0000000..573b278 --- /dev/null +++ b/config/defconfig_arm64-armada-linuxapp-gcc @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2018 Marvell International Ltd +# + +#include "defconfig_arm64-armv8a-linux-gcc" + +CONFIG_RTE_LIBRTE_MVEP_COMMON=y +CONFIG_RTE_LIBRTE_MVPP2_PMD=y +CONFIG_RTE_LIBRTE_MVNETA_PMD=y +CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=y + +# +# Compile Environment Abstraction Layer +# +CONFIG_RTE_MAX_LCORE=16 +CONFIG_RTE_MAX_NUMA_NODES=1 +CONFIG_RTE_CACHE_LINE_SIZE=64 + +# Disable NXP as it is conflict with MUSDK +CONFIG_RTE_LIBRTE_DPAA_BUS=n + +# Doesn't support NUMA +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n +CONFIG_RTE_LIBRTE_VHOST_NUMA=n -- 2.7.4 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a 2019-05-17 21:34 ` [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a lironh @ 2019-05-18 10:59 ` Jerin Jacob Kollanukkaran 2019-05-24 7:50 ` Ruifeng Wang (Arm Technology China) 1 sibling, 0 replies; 14+ messages in thread From: Jerin Jacob Kollanukkaran @ 2019-05-18 10:59 UTC (permalink / raw) To: Liron Himi, thomas; +Cc: dev, Liron Himi > -----Original Message----- > From: dev <dev-bounces@dpdk.org> On Behalf Of lironh@marvell.com > Sent: Saturday, May 18, 2019 3:04 AM > To: thomas@monjalon.net > Cc: dev@dpdk.org; Liron Himi <lironh@marvell.com> > Subject: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based > on armv8-a > > From: Liron Himi <lironh@marvell.com> > > This patch introduces armada target to address difference in number of cores, > no numa support > > Signed-off-by: Liron Himi <lironh@marvell.com> > Reviewed-by: Alan Winkowski <walan@marvell.com> > Tested-by: Liron Himi <lironh@marvell.com> > --- > config/defconfig_arm64-armada-linux-gcc | 24 ++++++++++++++++++++++++ > config/defconfig_arm64-armada-linuxapp-gcc | 24 ++++++++++++++++++++++++ Don't create a new file for linuxapp-gcc, instead make sym link like other armv8 config. > 2 files changed, 48 insertions(+) > create mode 100644 config/defconfig_arm64-armada-linux-gcc > create mode 100644 config/defconfig_arm64-armada-linuxapp-gcc > > diff --git a/config/defconfig_arm64-armada-linux-gcc > b/config/defconfig_arm64-armada-linux-gcc > new file mode 100644 > index 0000000..573b278 > --- /dev/null > +++ b/config/defconfig_arm64-armada-linux-gcc > @@ -0,0 +1,24 @@ > +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Marvell s/2018/2019 > +International Ltd # > + > +#include "defconfig_arm64-armv8a-linux-gcc" > + > +CONFIG_RTE_LIBRTE_MVEP_COMMON=y > +CONFIG_RTE_LIBRTE_MVPP2_PMD=y > +CONFIG_RTE_LIBRTE_MVNETA_PMD=y > +CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=y > + > +# > +# Compile Environment Abstraction Layer # > +CONFIG_RTE_MAX_LCORE=16e > +CONFIG_RTE_MAX_NUMA_NODES=1 > +CONFIG_RTE_CACHE_LINE_SIZE=64 Please move this section first, to have symmetry with other armv8 config file i.e # core changes # PMD changes With above changes: Acked-by: Jerin Jacob <jerinj@marvell.com> ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a 2019-05-17 21:34 ` [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a lironh 2019-05-18 10:59 ` Jerin Jacob Kollanukkaran @ 2019-05-24 7:50 ` Ruifeng Wang (Arm Technology China) 2019-05-26 5:33 ` Liron Himi 1 sibling, 1 reply; 14+ messages in thread From: Ruifeng Wang (Arm Technology China) @ 2019-05-24 7:50 UTC (permalink / raw) To: lironh, thomas; +Cc: dev, nd Hi, > -----Original Message----- > From: dev <dev-bounces@dpdk.org> On Behalf Of lironh@marvell.com > Sent: Saturday, May 18, 2019 05:34 > To: thomas@monjalon.net > Cc: dev@dpdk.org; Liron Himi <lironh@marvell.com> > Subject: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture > based on armv8-a > > From: Liron Himi <lironh@marvell.com> > > This patch introduces armada target to address difference in number of cores, > no numa support > > Signed-off-by: Liron Himi <lironh@marvell.com> > Reviewed-by: Alan Winkowski <walan@marvell.com> > Tested-by: Liron Himi <lironh@marvell.com> > --- > config/defconfig_arm64-armada-linux-gcc | 24 > ++++++++++++++++++++++++ > config/defconfig_arm64-armada-linuxapp-gcc | 24 > ++++++++++++++++++++++++ > 2 files changed, 48 insertions(+) > create mode 100644 config/defconfig_arm64-armada-linux-gcc > create mode 100644 config/defconfig_arm64-armada-linuxapp-gcc > > diff --git a/config/defconfig_arm64-armada-linux-gcc > b/config/defconfig_arm64-armada-linux-gcc > new file mode 100644 > index 0000000..573b278 > --- /dev/null > +++ b/config/defconfig_arm64-armada-linux-gcc > @@ -0,0 +1,24 @@ > +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Marvell > +International Ltd # > + > +#include "defconfig_arm64-armv8a-linux-gcc" > + > +CONFIG_RTE_LIBRTE_MVEP_COMMON=y > +CONFIG_RTE_LIBRTE_MVPP2_PMD=y > +CONFIG_RTE_LIBRTE_MVNETA_PMD=y > +CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=y > + > +# > +# Compile Environment Abstraction Layer # > +CONFIG_RTE_MAX_LCORE=16 > +CONFIG_RTE_MAX_NUMA_NODES=1 > +CONFIG_RTE_CACHE_LINE_SIZE=64 > + > +# Disable NXP as it is conflict with MUSDK > CONFIG_RTE_LIBRTE_DPAA_BUS=n > + > +# Doesn't support NUMA > +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n > +CONFIG_RTE_LIBRTE_VHOST_NUMA=n > diff --git a/config/defconfig_arm64-armada-linuxapp-gcc > b/config/defconfig_arm64-armada-linuxapp-gcc > new file mode 100644 > index 0000000..573b278 > --- /dev/null > +++ b/config/defconfig_arm64-armada-linuxapp-gcc > @@ -0,0 +1,24 @@ > +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Marvell > +International Ltd # > + > +#include "defconfig_arm64-armv8a-linux-gcc" > + Maybe CONFIG_RTE_MACHINE and CONFIG_RTE_ARCH_ARM_TUNE can be added as well. I referred to defconfig_arm64-dpaa2-linuxapp-gcc. > +CONFIG_RTE_LIBRTE_MVEP_COMMON=y > +CONFIG_RTE_LIBRTE_MVPP2_PMD=y > +CONFIG_RTE_LIBRTE_MVNETA_PMD=y > +CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=y > + > +# > +# Compile Environment Abstraction Layer # > +CONFIG_RTE_MAX_LCORE=16 > +CONFIG_RTE_MAX_NUMA_NODES=1 > +CONFIG_RTE_CACHE_LINE_SIZE=64 > + > +# Disable NXP as it is conflict with MUSDK > CONFIG_RTE_LIBRTE_DPAA_BUS=n > + > +# Doesn't support NUMA > +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n > +CONFIG_RTE_LIBRTE_VHOST_NUMA=n > -- > 2.7.4 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a 2019-05-24 7:50 ` Ruifeng Wang (Arm Technology China) @ 2019-05-26 5:33 ` Liron Himi 0 siblings, 0 replies; 14+ messages in thread From: Liron Himi @ 2019-05-26 5:33 UTC (permalink / raw) To: Ruifeng Wang (Arm Technology China), thomas; +Cc: dev, nd, Liron Himi Hi, Regards, Liron -----Original Message----- From: Ruifeng Wang (Arm Technology China) <Ruifeng.Wang@arm.com> Sent: Friday, May 24, 2019 10:51 To: Liron Himi <lironh@marvell.com>; thomas@monjalon.net Cc: dev@dpdk.org; nd <nd@arm.com> Subject: [EXT] RE: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a External Email ---------------------------------------------------------------------- Hi, > -----Original Message----- > From: dev <dev-bounces@dpdk.org> On Behalf Of lironh@marvell.com > Sent: Saturday, May 18, 2019 05:34 > To: thomas@monjalon.net > Cc: dev@dpdk.org; Liron Himi <lironh@marvell.com> > Subject: [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture > based on armv8-a > > From: Liron Himi <lironh@marvell.com> > > This patch introduces armada target to address difference in number of > cores, no numa support > > Signed-off-by: Liron Himi <lironh@marvell.com> > Reviewed-by: Alan Winkowski <walan@marvell.com> > Tested-by: Liron Himi <lironh@marvell.com> > --- > config/defconfig_arm64-armada-linux-gcc | 24 > ++++++++++++++++++++++++ > config/defconfig_arm64-armada-linuxapp-gcc | 24 > ++++++++++++++++++++++++ > 2 files changed, 48 insertions(+) > create mode 100644 config/defconfig_arm64-armada-linux-gcc > create mode 100644 config/defconfig_arm64-armada-linuxapp-gcc > > diff --git a/config/defconfig_arm64-armada-linux-gcc > b/config/defconfig_arm64-armada-linux-gcc > new file mode 100644 > index 0000000..573b278 > --- /dev/null > +++ b/config/defconfig_arm64-armada-linux-gcc > @@ -0,0 +1,24 @@ > +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Marvell > +International Ltd # > + > +#include "defconfig_arm64-armv8a-linux-gcc" > + > +CONFIG_RTE_LIBRTE_MVEP_COMMON=y > +CONFIG_RTE_LIBRTE_MVPP2_PMD=y > +CONFIG_RTE_LIBRTE_MVNETA_PMD=y > +CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=y > + > +# > +# Compile Environment Abstraction Layer # > +CONFIG_RTE_MAX_LCORE=16 > +CONFIG_RTE_MAX_NUMA_NODES=1 > +CONFIG_RTE_CACHE_LINE_SIZE=64 > + > +# Disable NXP as it is conflict with MUSDK > CONFIG_RTE_LIBRTE_DPAA_BUS=n > + > +# Doesn't support NUMA > +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n > +CONFIG_RTE_LIBRTE_VHOST_NUMA=n > diff --git a/config/defconfig_arm64-armada-linuxapp-gcc > b/config/defconfig_arm64-armada-linuxapp-gcc > new file mode 100644 > index 0000000..573b278 > --- /dev/null > +++ b/config/defconfig_arm64-armada-linuxapp-gcc > @@ -0,0 +1,24 @@ > +# SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Marvell > +International Ltd # > + > +#include "defconfig_arm64-armv8a-linux-gcc" > + Maybe CONFIG_RTE_MACHINE and CONFIG_RTE_ARCH_ARM_TUNE can be added as well. [L.H.] currently we are not using special machine flags, just the defaults ones. As for the TUNE, this config file support two platforms which have different arm cores, in this moment I don't want to split it to two config files just for this parameter. I referred to defconfig_arm64-dpaa2-linuxapp-gcc. > +CONFIG_RTE_LIBRTE_MVEP_COMMON=y > +CONFIG_RTE_LIBRTE_MVPP2_PMD=y > +CONFIG_RTE_LIBRTE_MVNETA_PMD=y > +CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=y > + > +# > +# Compile Environment Abstraction Layer # > +CONFIG_RTE_MAX_LCORE=16 > +CONFIG_RTE_MAX_NUMA_NODES=1 > +CONFIG_RTE_CACHE_LINE_SIZE=64 > + > +# Disable NXP as it is conflict with MUSDK > CONFIG_RTE_LIBRTE_DPAA_BUS=n > + > +# Doesn't support NUMA > +CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n > +CONFIG_RTE_LIBRTE_VHOST_NUMA=n > -- > 2.7.4 ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2019-05-27 1:42 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-05-17 21:27 [dpdk-dev] [PATCH 0/2] Introduces armada target lironh 2019-05-17 21:27 ` [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a lironh 2019-05-22 9:11 ` Ruifeng Wang (Arm Technology China) 2019-05-22 9:12 ` Liron Himi 2019-05-23 10:11 ` Ruifeng Wang (Arm Technology China) 2019-05-23 10:51 ` Liron Himi 2019-05-24 1:10 ` Ruifeng Wang (Arm Technology China) 2019-05-24 13:06 ` Ferruh Yigit 2019-05-27 1:42 ` Ruifeng Wang (Arm Technology China) 2019-05-17 21:27 ` [dpdk-dev] [PATCH 2/2] meson: " lironh 2019-05-17 21:34 [dpdk-dev] [PATCH 0/2] Introduces armada target lironh 2019-05-17 21:34 ` [dpdk-dev] [PATCH 1/2] mk: add Marvell ARMADA architecture based on armv8-a lironh 2019-05-18 10:59 ` Jerin Jacob Kollanukkaran 2019-05-24 7:50 ` Ruifeng Wang (Arm Technology China) 2019-05-26 5:33 ` Liron Himi
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).