From: "Namburu, Chandu-babu" <chandu@amd.com>
To: "Sebastian, Selwin" <Selwin.Sebastian@amd.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: RE: [PATCH v1 6/6] net/axgbe: alter the port speed bit range
Date: Mon, 24 Jan 2022 16:40:11 +0000 [thread overview]
Message-ID: <MW2PR12MB253874BC032B6932B6227FB2C85E9@MW2PR12MB2538.namprd12.prod.outlook.com> (raw)
In-Reply-To: <20220110113509.553184-7-ssebasti@amd.com>
[Public]
Acked-by: Chandubabu Namburu <chandu@amd.com>
-----Original Message-----
From: ssebasti@amd.com <ssebasti@amd.com>
Sent: Monday, January 10, 2022 5:05 PM
To: dev@dpdk.org
Subject: [PATCH v1 6/6] net/axgbe: alter the port speed bit range
From: Selwin Sebastian <selwin.sebastian@amd.com>
Newer generation Hardware uses the slightly different port speed bit widths, so alter the existing port speed bit range to extend support to the newer generation hardware while maintaining the backward compatibility with older generation hardware.
The previously reserved bits are now being used which then requires the adjustment to the BIT values, e.g.:
Before:
PORT_PROPERTY_0[22:21] - Reserved
PORT_PROPERTY_0[26:23] - Supported Speeds
After:
PORT_PROPERTY_0[21] - Reserved
PORT_PROPERTY_0[26:22] - Supported Speeds
To make this backwards compatible, the existing BIT definitions for the port speeds are incremented by one to maintain the original position.
Signed-off-by: Selwin Sebastian <selwin.sebastian@amd.com>
---
drivers/net/axgbe/axgbe_common.h | 4 ++--
drivers/net/axgbe/axgbe_phy_impl.c | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/axgbe/axgbe_common.h b/drivers/net/axgbe/axgbe_common.h
index a5431dd998..5310ac54f5 100644
--- a/drivers/net/axgbe/axgbe_common.h
+++ b/drivers/net/axgbe/axgbe_common.h
@@ -1032,8 +1032,8 @@
#define XP_PROP_0_PORT_ID_WIDTH 8
#define XP_PROP_0_PORT_MODE_INDEX 8
#define XP_PROP_0_PORT_MODE_WIDTH 4
-#define XP_PROP_0_PORT_SPEEDS_INDEX 23
-#define XP_PROP_0_PORT_SPEEDS_WIDTH 4
+#define XP_PROP_0_PORT_SPEEDS_INDEX 22
+#define XP_PROP_0_PORT_SPEEDS_WIDTH 5
#define XP_PROP_1_MAX_RX_DMA_INDEX 24
#define XP_PROP_1_MAX_RX_DMA_WIDTH 5
#define XP_PROP_1_MAX_RX_QUEUES_INDEX 8
diff --git a/drivers/net/axgbe/axgbe_phy_impl.c b/drivers/net/axgbe/axgbe_phy_impl.c
index 2aad8babd2..776144696a 100644
--- a/drivers/net/axgbe/axgbe_phy_impl.c
+++ b/drivers/net/axgbe/axgbe_phy_impl.c
@@ -7,10 +7,10 @@
#include "axgbe_common.h"
#include "axgbe_phy.h"
-#define AXGBE_PHY_PORT_SPEED_100 BIT(0)
-#define AXGBE_PHY_PORT_SPEED_1000 BIT(1)
-#define AXGBE_PHY_PORT_SPEED_2500 BIT(2)
-#define AXGBE_PHY_PORT_SPEED_10000 BIT(3)
+#define AXGBE_PHY_PORT_SPEED_100 BIT(1)
+#define AXGBE_PHY_PORT_SPEED_1000 BIT(2)
+#define AXGBE_PHY_PORT_SPEED_2500 BIT(3)
+#define AXGBE_PHY_PORT_SPEED_10000 BIT(4)
#define AXGBE_MUTEX_RELEASE 0x80000000
--
2.25.1
next prev parent reply other threads:[~2022-01-24 16:40 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-10 11:35 axgbe PMD fixes and updates ssebasti
2022-01-10 11:35 ` [PATCH v1 1/6] net/axgbe: always attempt link training in KR mode ssebasti
2022-01-10 11:35 ` [PATCH v1 2/6] net/axgbe: toggle PLL settings during rate change ssebasti
2022-01-19 9:26 ` Namburu, Chandu-babu
2022-01-10 11:35 ` [PATCH v1 3/6] net/axgbe: simplify mailbox interface rate change code ssebasti
2022-01-24 16:39 ` Namburu, Chandu-babu
2022-01-10 11:35 ` [PATCH v1 4/6] net/axgbe: reset PHY Rx when mailbox command timeout ssebasti
2022-01-24 16:40 ` Namburu, Chandu-babu
2022-01-10 11:35 ` [PATCH v1 5/6] net/axgbe: add support for new port mode ssebasti
2022-01-24 16:40 ` Namburu, Chandu-babu
2022-01-10 11:35 ` [PATCH v1 6/6] net/axgbe: alter the port speed bit range ssebasti
2022-01-24 16:40 ` Namburu, Chandu-babu [this message]
2022-01-25 10:23 ` axgbe PMD fixes and updates Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MW2PR12MB253874BC032B6932B6227FB2C85E9@MW2PR12MB2538.namprd12.prod.outlook.com \
--to=chandu@amd.com \
--cc=Selwin.Sebastian@amd.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).