From: "Wu, Jingjing" <jingjing.wu@intel.com>
To: "Liu, Mingxia" <mingxia.liu@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Xing, Beilei" <beilei.xing@intel.com>
Subject: RE: [PATCH v3 5/6] common/idpf: add alarm to support handle vchnl message
Date: Thu, 2 Feb 2023 04:23:33 +0000 [thread overview]
Message-ID: <MW3PR11MB4587CFAE31859DF605242A92E3D69@MW3PR11MB4587.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20230118071440.902155-6-mingxia.liu@intel.com>
> @@ -83,12 +84,49 @@ static int
> idpf_dev_link_update(struct rte_eth_dev *dev,
> __rte_unused int wait_to_complete)
> {
> + struct idpf_vport *vport = dev->data->dev_private;
> struct rte_eth_link new_link;
>
> memset(&new_link, 0, sizeof(new_link));
>
> - new_link.link_speed = RTE_ETH_SPEED_NUM_NONE;
> + switch (vport->link_speed) {
> + case 10:
> + new_link.link_speed = RTE_ETH_SPEED_NUM_10M;
> + break;
> + case 100:
> + new_link.link_speed = RTE_ETH_SPEED_NUM_100M;
> + break;
> + case 1000:
> + new_link.link_speed = RTE_ETH_SPEED_NUM_1G;
> + break;
> + case 10000:
> + new_link.link_speed = RTE_ETH_SPEED_NUM_10G;
> + break;
> + case 20000:
> + new_link.link_speed = RTE_ETH_SPEED_NUM_20G;
> + break;
> + case 25000:
> + new_link.link_speed = RTE_ETH_SPEED_NUM_25G;
> + break;
> + case 40000:
> + new_link.link_speed = RTE_ETH_SPEED_NUM_40G;
> + break;
> + case 50000:
> + new_link.link_speed = RTE_ETH_SPEED_NUM_50G;
> + break;
> + case 100000:
> + new_link.link_speed = RTE_ETH_SPEED_NUM_100G;
> + break;
> + case 200000:
> + new_link.link_speed = RTE_ETH_SPEED_NUM_200G;
> + break;
> + default:
> + new_link.link_speed = RTE_ETH_SPEED_NUM_NONE;
> + }
> +
> new_link.link_duplex = RTE_ETH_LINK_FULL_DUPLEX;
> + new_link.link_status = vport->link_up ? RTE_ETH_LINK_UP :
> + RTE_ETH_LINK_DOWN;
> new_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
> RTE_ETH_LINK_SPEED_FIXED);
Better to use RTE_ETH_LINK_[AUTONEG/FIXED] instead.
>
> @@ -927,6 +965,127 @@ idpf_parse_devargs(struct rte_pci_device *pci_dev, struct
> idpf_adapter_ext *adap
> return ret;
> }
>
> +static struct idpf_vport *
> +idpf_find_vport(struct idpf_adapter_ext *adapter, uint32_t vport_id)
> +{
> + struct idpf_vport *vport = NULL;
> + int i;
> +
> + for (i = 0; i < adapter->cur_vport_nb; i++) {
> + vport = adapter->vports[i];
> + if (vport->vport_id != vport_id)
> + continue;
> + else
> + return vport;
> + }
> +
> + return vport;
> +}
> +
> +static void
> +idpf_handle_event_msg(struct idpf_vport *vport, uint8_t *msg, uint16_t msglen)
> +{
> + struct virtchnl2_event *vc_event = (struct virtchnl2_event *)msg;
> + struct rte_eth_dev *dev = (struct rte_eth_dev *)vport->dev;
> +
> + if (msglen < sizeof(struct virtchnl2_event)) {
> + PMD_DRV_LOG(ERR, "Error event");
> + return;
> + }
> +
> + switch (vc_event->event) {
> + case VIRTCHNL2_EVENT_LINK_CHANGE:
> + PMD_DRV_LOG(DEBUG, "VIRTCHNL2_EVENT_LINK_CHANGE");
> + vport->link_up = vc_event->link_status;
Any conversion between bool and uint8?
next prev parent reply other threads:[~2023-02-02 4:23 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-16 9:36 [PATCH 0/7] add idpf pmd enhancement features Mingxia Liu
2022-12-16 9:37 ` [PATCH 1/7] common/idpf: add hw statistics Mingxia Liu
2022-12-16 9:37 ` [PATCH 2/7] common/idpf: add RSS set/get ops Mingxia Liu
2022-12-16 9:37 ` [PATCH 3/7] common/idpf: support single q scatter RX datapath Mingxia Liu
2022-12-16 9:37 ` [PATCH 4/7] common/idpf: add rss_offload hash in singleq rx Mingxia Liu
2022-12-16 9:37 ` [PATCH 5/7] common/idpf: add alarm to support handle vchnl message Mingxia Liu
2022-12-16 9:37 ` [PATCH 6/7] common/idpf: add xstats ops Mingxia Liu
2022-12-16 9:37 ` [PATCH 7/7] common/idpf: update mbuf_alloc_failed multi-thread process Mingxia Liu
2023-01-11 7:15 ` [PATCH 0/6] add idpf pmd enhancement features Mingxia Liu
2023-01-11 7:15 ` [PATCH v2 1/6] common/idpf: add hw statistics Mingxia Liu
2023-01-11 7:15 ` [PATCH v2 2/6] common/idpf: add RSS set/get ops Mingxia Liu
2023-01-11 7:15 ` [PATCH v2 3/6] common/idpf: support single q scatter RX datapath Mingxia Liu
2023-01-11 7:15 ` [PATCH v2 4/6] common/idpf: add rss_offload hash in singleq rx Mingxia Liu
2023-01-11 7:15 ` [PATCH v2 5/6] common/idpf: add alarm to support handle vchnl message Mingxia Liu
2023-01-11 7:15 ` [PATCH v2 6/6] common/idpf: add xstats ops Mingxia Liu
2023-01-18 7:14 ` [PATCH v3 0/6] add idpf pmd enhancement features Mingxia Liu
2023-01-18 7:14 ` [PATCH v3 1/6] common/idpf: add hw statistics Mingxia Liu
2023-02-01 8:48 ` Wu, Jingjing
2023-02-01 12:34 ` Liu, Mingxia
2023-01-18 7:14 ` [PATCH v3 2/6] common/idpf: add RSS set/get ops Mingxia Liu
2023-02-02 3:28 ` Wu, Jingjing
2023-02-07 3:10 ` Liu, Mingxia
2023-01-18 7:14 ` [PATCH v3 3/6] common/idpf: support single q scatter RX datapath Mingxia Liu
2023-02-02 3:45 ` Wu, Jingjing
2023-02-02 7:19 ` Liu, Mingxia
2023-01-18 7:14 ` [PATCH v3 4/6] common/idpf: add rss_offload hash in singleq rx Mingxia Liu
2023-01-18 7:14 ` [PATCH v3 5/6] common/idpf: add alarm to support handle vchnl message Mingxia Liu
2023-02-02 4:23 ` Wu, Jingjing [this message]
2023-02-02 7:39 ` Liu, Mingxia
2023-02-02 8:46 ` Wu, Jingjing
2023-01-18 7:14 ` [PATCH v3 6/6] common/idpf: add xstats ops Mingxia Liu
2023-02-07 9:56 ` [PATCH v4 0/6] add idpf pmd enhancement features Mingxia Liu
2023-02-07 9:56 ` [PATCH v4 1/6] common/idpf: add hw statistics Mingxia Liu
2023-02-07 9:56 ` [PATCH v4 2/6] common/idpf: add RSS set/get ops Mingxia Liu
2023-02-07 9:56 ` [PATCH v4 3/6] common/idpf: support single q scatter RX datapath Mingxia Liu
2023-02-07 9:56 ` [PATCH v4 4/6] common/idpf: add rss_offload hash in singleq rx Mingxia Liu
2023-02-07 9:57 ` [PATCH v4 5/6] common/idpf: add alarm to support handle vchnl message Mingxia Liu
2023-02-07 9:57 ` [PATCH v4 6/6] common/idpf: add xstats ops Mingxia Liu
2023-02-07 10:08 ` [PATCH v4 0/6] add idpf pmd enhancement features Mingxia Liu
2023-02-07 10:08 ` [PATCH v5 1/6] common/idpf: add hw statistics Mingxia Liu
2023-02-07 10:16 ` [PATCH v6 0/6] add idpf pmd enhancement features Mingxia Liu
2023-02-07 10:16 ` [PATCH v6 1/6] common/idpf: add hw statistics Mingxia Liu
2023-02-08 2:00 ` Zhang, Qi Z
2023-02-08 8:28 ` Liu, Mingxia
2023-02-07 10:16 ` [PATCH v6 2/6] common/idpf: add RSS set/get ops Mingxia Liu
2023-02-07 10:16 ` [PATCH v6 3/6] common/idpf: support single q scatter RX datapath Mingxia Liu
2023-02-07 10:16 ` [PATCH v6 4/6] common/idpf: add rss_offload hash in singleq rx Mingxia Liu
2023-02-07 10:16 ` [PATCH v6 5/6] common/idpf: add alarm to support handle vchnl message Mingxia Liu
2023-02-07 10:16 ` [PATCH v6 6/6] common/idpf: add xstats ops Mingxia Liu
2023-02-08 0:28 ` [PATCH v6 0/6] add idpf pmd enhancement features Wu, Jingjing
2023-02-08 7:33 ` [PATCH v7 " Mingxia Liu
2023-02-08 7:33 ` [PATCH v7 1/6] net/idpf: add hw statistics Mingxia Liu
2023-02-08 7:33 ` [PATCH v7 2/6] net/idpf: add RSS set/get ops Mingxia Liu
2023-02-08 7:33 ` [PATCH v7 3/6] net/idpf: support single q scatter RX datapath Mingxia Liu
2023-02-08 7:33 ` [PATCH v7 4/6] net/idpf: add rss_offload hash in singleq rx Mingxia Liu
2023-02-08 7:34 ` [PATCH v7 5/6] net/idpf: add alarm to support handle vchnl message Mingxia Liu
2023-02-08 7:34 ` [PATCH v7 6/6] net/idpf: add xstats ops Mingxia Liu
2023-02-08 9:32 ` [PATCH v7 0/6] add idpf pmd enhancement features Zhang, Qi Z
2023-02-07 10:08 ` [PATCH v5 2/6] common/idpf: add RSS set/get ops Mingxia Liu
2023-02-07 10:08 ` [PATCH v5 3/6] common/idpf: support single q scatter RX datapath Mingxia Liu
2023-02-07 10:08 ` [PATCH v5 4/6] common/idpf: add rss_offload hash in singleq rx Mingxia Liu
2023-02-07 10:08 ` [PATCH v5 5/6] common/idpf: add alarm to support handle vchnl message Mingxia Liu
2023-02-07 10:08 ` [PATCH v5 6/6] common/idpf: add xstats ops Mingxia Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MW3PR11MB4587CFAE31859DF605242A92E3D69@MW3PR11MB4587.namprd11.prod.outlook.com \
--to=jingjing.wu@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=mingxia.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).