From: "Zhang, Roy Fan" <roy.fan.zhang@intel.com>
To: "psatheesh@marvell.com" <psatheesh@marvell.com>,
"Nicolau, Radu" <radu.nicolau@intel.com>,
Akhil Goyal <gakhil@marvell.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: RE: [dpdk-dev] [PATCH v3] examples/ipsec-secgw: support more flow patterns and actions
Date: Fri, 17 Jun 2022 09:52:26 +0000 [thread overview]
Message-ID: <PH7PR11MB581737145FB5119C4DF1E14CB8AF9@PH7PR11MB5817.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20220603031650.3169872-1-psatheesh@marvell.com>
Hi,
> -----Original Message-----
> From: psatheesh@marvell.com <psatheesh@marvell.com>
> Sent: Friday, June 3, 2022 4:17 AM
> To: Nicolau, Radu <radu.nicolau@intel.com>; Akhil Goyal <gakhil@marvell.com>
> Cc: dev@dpdk.org; Satheesh Paul <psatheesh@marvell.com>
> Subject: [dpdk-dev] [PATCH v3] examples/ipsec-secgw: support more flow
> patterns and actions
>
> From: Satheesh Paul <psatheesh@marvell.com>
>
> Added support to create flow rules with count, mark and
> security actions and mark pattern.
>
> Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
> ---
<snip>
> .. code-block:: console
>
> - flow <ip_ver> <src_ip> <dst_ip> <port> <queue>
> -
> + flow <mark> <eth> <ip_ver> <src_ip> <dst_ip> <port> <queue> \
> + <count> <security> <set_mark>
>
> where each options means:
>
> +``<mark>``
> +
> + * Set RTE_FLOW_ITEM_TYPE_MARK pattern item with the given mark value.
> +
> + * Optional: Yes, this pattern is not set by default.
> +
> + * Syntax: *mark X*
> +
<snip>
> +
> +``<set_mark>``
> +
> + * Set RTE_FLOW_ACTION_TYPE_MARK action with the given mark value.
> +
> + * Optional: yes, this action is not set by default.
> +
> + * Syntax: *set_mark X*
> +
> Example flow rules:
I feel "mark" and "set_mark" are duplicated?
From the implementation below it looks there are slight difference in between
But we may need better description for both.
>
> .. code-block:: console
> @@ -948,6 +988,18 @@ Example flow rules:
>
> flow ipv6 dst 1111:1111:1111:1111:1111:1111:1111:5555/116 port 1
> queue 0
>
> + flow mark 123 ipv4 dst 192.168.0.0/16 port 0 queue 0 count
> +
> + flow eth ipv4 dst 192.168.0.0/16 port 0 queue 0 count
> +
> + flow ipv4 dst 192.168.0.0/16 port 0 queue 0 count
> +
> + flow ipv4 dst 192.168.0.0/16 port 0 queue 0
> +
> + flow port 0 security set_mark 123
> +
> + flow ipv4 dst 1.1.0.0/16 port 0 count set_mark 123 security
> +
>
> Neighbour rule syntax
> ^^^^^^^^^^^^^^^^^^^^^
> diff --git a/examples/ipsec-secgw/flow.c b/examples/ipsec-secgw/flow.c
> index 1a1ec7861c..2088876999 100644
> --- a/examples/ipsec-secgw/flow.c
> +++ b/examples/ipsec-secgw/flow.c
> @@ -15,7 +15,9 @@
> #define FLOW_RULES_MAX 128
>
> struct flow_rule_entry {
> + uint8_t is_eth;
> uint8_t is_ipv4;
> + uint8_t is_ipv6;
> RTE_STD_C11
> union {
> struct {
> @@ -27,8 +29,15 @@ struct flow_rule_entry {
> struct rte_flow_item_ipv6 mask;
> } ipv6;
> };
> + struct rte_flow_item_mark mark_val;
> uint16_t port;
> uint16_t queue;
> + bool is_queue_set;
> + bool enable_count;
> + bool enable_mark;
> + bool set_security_action;
> + bool set_mark_action;
> + uint32_t mark_action_val;
> struct rte_flow *flow;
> } flow_rule_tbl[FLOW_RULES_MAX];
>
> @@ -64,8 +73,9 @@ ipv4_addr_cpy(rte_be32_t *spec, rte_be32_t *mask, char
> *token,
> memcpy(mask, &rte_flow_item_ipv4_mask.hdr.src_addr, sizeof(ip));
>
> *spec = ip.s_addr;
> +
> if (depth < 32)
> - *mask = *mask << (32-depth);
> + *mask = htonl(*mask << (32 - depth));
>
> return 0;
> }
> @@ -124,7 +134,7 @@ parse_flow_tokens(char **tokens, uint32_t n_tokens,
> struct parse_status *status)
> {
> struct flow_rule_entry *rule;
> - uint32_t ti;
> + uint32_t ti = 0;
>
> if (nb_flow_rule >= FLOW_RULES_MAX) {
> printf("Too many flow rules\n");
> @@ -134,49 +144,73 @@ parse_flow_tokens(char **tokens, uint32_t
> n_tokens,
> rule = &flow_rule_tbl[nb_flow_rule];
> memset(rule, 0, sizeof(*rule));
>
> - if (strcmp(tokens[0], "ipv4") == 0) {
> - rule->is_ipv4 = 1;
> - } else if (strcmp(tokens[0], "ipv6") == 0) {
> - rule->is_ipv4 = 0;
> - } else {
> - APP_CHECK(0, status, "unrecognized input \"%s\"", tokens[0]);
> - return;
> - }
> -
> - for (ti = 1; ti < n_tokens; ti++) {
> - if (strcmp(tokens[ti], "src") == 0) {
> + for (ti = 0; ti < n_tokens; ti++) {
> + if (strcmp(tokens[ti], "mark") == 0) {
> INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
> + if (status->status < 0)
> + return;
> + APP_CHECK_TOKEN_IS_NUM(tokens, ti, status);
> if (status->status < 0)
> return;
>
> - if (rule->is_ipv4) {
> + rule->mark_val.id = atoi(tokens[ti]);
> + rule->enable_mark = true;
> + continue;
> + }
> + if (strcmp(tokens[ti], "eth") == 0) {
> + rule->is_eth = true;
> + continue;
> + }
> +
> + if (strcmp(tokens[ti], "ipv4") == 0) {
> + rule->is_ipv4 = true;
> + INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
> + if (status->status < 0)
> + return;
> + if (strcmp(tokens[ti], "src") == 0) {
> + INCREMENT_TOKEN_INDEX(ti, n_tokens,
> status);
> + if (status->status < 0)
> + return;
> if (ipv4_addr_cpy(&rule-
> >ipv4.spec.hdr.src_addr,
> &rule-
> >ipv4.mask.hdr.src_addr,
> tokens[ti], status))
> return;
> - } else {
> - if (ipv6_addr_cpy(rule->ipv6.spec.hdr.src_addr,
> - rule->ipv6.mask.hdr.src_addr,
> + }
> + if (strcmp(tokens[ti], "dst") == 0) {
> + INCREMENT_TOKEN_INDEX(ti, n_tokens,
> status);
> + if (status->status < 0)
> + return;
> + if (ipv4_addr_cpy(&rule-
> >ipv4.spec.hdr.dst_addr,
> + &rule-
> >ipv4.mask.hdr.dst_addr,
> tokens[ti], status))
> return;
> }
> + continue;
> }
> - if (strcmp(tokens[ti], "dst") == 0) {
> + if (strcmp(tokens[ti], "ipv6") == 0) {
> + rule->is_ipv6 = true;
> INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
> if (status->status < 0)
> return;
> -
> - if (rule->is_ipv4) {
> - if (ipv4_addr_cpy(&rule-
> >ipv4.spec.hdr.dst_addr,
> - &rule-
> >ipv4.mask.hdr.dst_addr,
> + if (strcmp(tokens[ti], "src") == 0) {
> + INCREMENT_TOKEN_INDEX(ti, n_tokens,
> status);
> + if (status->status < 0)
> + return;
> + if (ipv6_addr_cpy(rule->ipv6.spec.hdr.src_addr,
> + rule->ipv6.mask.hdr.src_addr,
> tokens[ti], status))
> return;
> - } else {
> + }
> + if (strcmp(tokens[ti], "dst") == 0) {
> + INCREMENT_TOKEN_INDEX(ti, n_tokens,
> status);
> + if (status->status < 0)
> + return;
> if (ipv6_addr_cpy(rule->ipv6.spec.hdr.dst_addr,
> rule->ipv6.mask.hdr.dst_addr,
> tokens[ti], status))
> return;
> }
> + continue;
> }
>
> if (strcmp(tokens[ti], "port") == 0) {
> @@ -188,6 +222,7 @@ parse_flow_tokens(char **tokens, uint32_t n_tokens,
> return;
>
> rule->port = atoi(tokens[ti]);
> + continue;
> }
>
> if (strcmp(tokens[ti], "queue") == 0) {
> @@ -199,50 +234,129 @@ parse_flow_tokens(char **tokens, uint32_t
> n_tokens,
> return;
>
> rule->queue = atoi(tokens[ti]);
> + rule->is_queue_set = true;
> + continue;
> + }
> +
> + if (strcmp(tokens[ti], "count") == 0) {
> + rule->enable_count = true;
> + continue;
> + }
> +
> + if (strcmp(tokens[ti], "security") == 0) {
> + rule->set_security_action = true;
> + continue;
> }
> +
> + if (strcmp(tokens[ti], "set_mark") == 0) {
> + INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
> + if (status->status < 0)
> + return;
> + APP_CHECK_TOKEN_IS_NUM(tokens, ti, status);
> + if (status->status < 0)
> + return;
> +
> + rule->set_mark_action = true;
> + rule->mark_action_val = atoi(tokens[ti]);
> + continue;
> + }
> +
> + sprintf(status->parse_msg, "Unrecognized input:%s\n",
> tokens[ti]);
> + status->status = -1;
> + return;
> }
> + printf("\n");
>
> nb_flow_rule++;
> }
>
> -#define MAX_RTE_FLOW_PATTERN (3)
> -#define MAX_RTE_FLOW_ACTIONS (2)
> +#define MAX_RTE_FLOW_PATTERN (4)
> +#define MAX_RTE_FLOW_ACTIONS (5)
>
> static void
> flow_init_single(struct flow_rule_entry *rule)
> {
> - struct rte_flow_item pattern[MAX_RTE_FLOW_PATTERN] = {};
> struct rte_flow_action action[MAX_RTE_FLOW_ACTIONS] = {};
> + struct rte_flow_item pattern[MAX_RTE_FLOW_PATTERN] = {};
> + struct rte_flow_action_queue queue_action;
> + struct rte_flow_action_mark mark_action;
> + int ret, pattern_idx = 0, act_idx = 0;
> + struct rte_flow_item_mark mark_mask;
> struct rte_flow_attr attr = {};
> - struct rte_flow_error err;
> - int ret;
> + struct rte_flow_error err = {};
>
> attr.egress = 0;
> attr.ingress = 1;
>
> - action[0].type = RTE_FLOW_ACTION_TYPE_QUEUE;
> - action[0].conf = &(struct rte_flow_action_queue) {
> - .index = rule->queue,
> - };
> - action[1].type = RTE_FLOW_ACTION_TYPE_END;
> + if (rule->is_queue_set) {
> + queue_action.index = rule->queue;
> + action[act_idx].type = RTE_FLOW_ACTION_TYPE_QUEUE;
> + action[act_idx].conf = &queue_action;
> + act_idx++;
> + }
> +
> + if (rule->enable_count) {
> + action[act_idx].type = RTE_FLOW_ACTION_TYPE_COUNT;
> + act_idx++;
> + }
> +
> + if (rule->set_security_action) {
> + action[act_idx].type = RTE_FLOW_ACTION_TYPE_SECURITY;
> + action[act_idx].conf = NULL;
> + act_idx++;
> + }
> +
> + if (rule->set_mark_action) {
> + mark_action.id = rule->mark_action_val;
> + action[act_idx].type = RTE_FLOW_ACTION_TYPE_MARK;
> + action[act_idx].conf = &mark_action;
> + act_idx++;
> + }
>
> - pattern[0].type = RTE_FLOW_ITEM_TYPE_ETH;
> + action[act_idx].type = RTE_FLOW_ACTION_TYPE_END;
> + action[act_idx].conf = NULL;
> +
> + if (rule->enable_mark) {
> + mark_mask.id = UINT32_MAX;
> + pattern[pattern_idx].type = RTE_FLOW_ITEM_TYPE_MARK;
> + pattern[pattern_idx].spec = &rule->mark_val;
> + pattern[pattern_idx].mask = &mark_mask;
> + pattern_idx++;
> + }
> +
> + if (rule->is_eth) {
> + pattern[pattern_idx].type = RTE_FLOW_ITEM_TYPE_ETH;
> + pattern_idx++;
> + }
>
> if (rule->is_ipv4) {
> - pattern[1].type = RTE_FLOW_ITEM_TYPE_IPV4;
> - pattern[1].spec = &rule->ipv4.spec;
> - pattern[1].mask = &rule->ipv4.mask;
> - } else {
> - pattern[1].type = RTE_FLOW_ITEM_TYPE_IPV6;
> - pattern[1].spec = &rule->ipv6.spec;
> - pattern[1].mask = &rule->ipv6.mask;
> + pattern[pattern_idx].type = RTE_FLOW_ITEM_TYPE_IPV4;
> + pattern[pattern_idx].spec = &rule->ipv4.spec;
> + pattern[pattern_idx].mask = &rule->ipv4.mask;
> + pattern_idx++;
> + }
> +
> + if (rule->is_ipv6) {
> + pattern[pattern_idx].type = RTE_FLOW_ITEM_TYPE_IPV6;
> + pattern[pattern_idx].spec = &rule->ipv6.spec;
> + pattern[pattern_idx].mask = &rule->ipv6.mask;
> + pattern_idx++;
> + }
> +
> + if (rule->set_security_action) {
> + pattern[pattern_idx].type = RTE_FLOW_ITEM_TYPE_ESP;
> + pattern[pattern_idx].spec = NULL;
> + pattern[pattern_idx].mask = NULL;
> + pattern[pattern_idx].last = NULL;
> + pattern_idx++;
> }
>
> - pattern[2].type = RTE_FLOW_ITEM_TYPE_END;
> + pattern[pattern_idx].type = RTE_FLOW_ITEM_TYPE_END;
>
> ret = rte_flow_validate(rule->port, &attr, pattern, action, &err);
> if (ret < 0) {
> RTE_LOG(ERR, IPSEC, "Flow validation failed %s\n",
> err.message);
> + rule->flow = 0;
> return;
> }
>
> @@ -251,6 +365,56 @@ flow_init_single(struct flow_rule_entry *rule)
> RTE_LOG(ERR, IPSEC, "Flow creation return %s\n",
> err.message);
> }
>
> +void
> +flow_print_counters(void)
> +{
> + struct rte_flow_query_count count_query;
> + struct rte_flow_action action;
> + struct flow_rule_entry *rule;
> + struct rte_flow_error error;
> + int i = 0, ret = 0;
> +
> + action.type = RTE_FLOW_ACTION_TYPE_COUNT;
> +
> + for (i = 0; i < nb_flow_rule; i++) {
> + rule = &flow_rule_tbl[i];
> + if (!rule->flow || !rule->enable_count)
> + continue;
> +
> + /* Poisoning to make sure PMDs update it in case of error. */
> + memset(&error, 0x55, sizeof(error));
> + memset(&count_query, 0, sizeof(count_query));
> + ret = rte_flow_query(rule->port, rule->flow, &action,
> + &count_query, &error);
> + if (ret)
> + RTE_LOG(ERR, IPSEC,
> + "Failed to get flow counter "
> + " for port %u, err msg: %s\n",
> + rule->port, error.message);
> +
> + printf("Flow #%3d:", i);
> + if (rule->is_ipv4) {
> + printf(" spec ipv4 ");
> + ipv4_hdr_print(&rule->ipv4.spec.hdr);
> + }
> + if (rule->is_ipv6) {
> + printf(" spec ipv6 ");
> + ipv6_hdr_print(&rule->ipv6.spec.hdr);
> + }
> +
> + if (rule->set_security_action)
> + printf(" Security action set,");
> +
> + if (rule->enable_mark)
> + printf(" Mark Enabled");
> +
> + printf(" Port: %d,", rule->port);
> + if (rule->is_queue_set)
> + printf(" Queue: %d", rule->queue);
> + printf(" Hits: %"PRIu64"\n", count_query.hits);
> + }
> +}
> +
> void
> flow_init(void)
> {
> @@ -264,21 +428,37 @@ flow_init(void)
>
> for (i = 0; i < nb_flow_rule; i++) {
> rule = &flow_rule_tbl[i];
> + printf("Flow #%3d: ", i);
> if (rule->is_ipv4) {
> - printf("Flow #%3d: spec ipv4 ", i);
> + printf("spec ipv4 ");
> ipv4_hdr_print(&rule->ipv4.spec.hdr);
> printf("\n");
> - printf(" mask ipv4 ");
> + printf(" mask ipv4 ");
> ipv4_hdr_print(&rule->ipv4.mask.hdr);
> - } else {
> - printf("Flow #%3d: spec ipv6 ", i);
> + }
> + if (rule->is_ipv6) {
> + printf("spec ipv6 ");
> ipv6_hdr_print(&rule->ipv6.spec.hdr);
> printf("\n");
> - printf(" mask ipv6 ");
> + printf(" mask ipv6 ");
> ipv6_hdr_print(&rule->ipv6.mask.hdr);
> }
>
> - printf("\tPort: %d, Queue: %d", rule->port, rule->queue);
> + if (rule->enable_mark)
> + printf(", Mark enabled");
> +
> + printf("\tPort: %d,", rule->port);
> + if (rule->is_queue_set)
> + printf(" Queue: %d,", rule->queue);
> +
> + if (rule->set_security_action)
> + printf(" Security action set,");
> +
> + if (rule->set_mark_action)
> + printf(" Mark: %d,", rule->mark_action_val);
> +
> + if (rule->enable_count)
> + printf(" Counter enabled,");
>
> if (rule->flow == NULL)
> printf(" [UNSUPPORTED]");
> diff --git a/examples/ipsec-secgw/flow.h b/examples/ipsec-secgw/flow.h
> index 1b1b4774e4..9492d06346 100644
> --- a/examples/ipsec-secgw/flow.h
> +++ b/examples/ipsec-secgw/flow.h
> @@ -11,5 +11,6 @@ void parse_flow_tokens(char **tokens, uint32_t n_tokens,
> struct parse_status *status);
>
> void flow_init(void);
> +void flow_print_counters(void);
>
> #endif /* _FLOW_H_ */
> diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-
> secgw.c
> index 42b5081840..244453e06e 100644
> --- a/examples/ipsec-secgw/ipsec-secgw.c
> +++ b/examples/ipsec-secgw/ipsec-secgw.c
> @@ -3271,7 +3271,6 @@ ipsec_secgw_telemetry_init(void)
> "Optional Parameters: int <logical core id>");
> }
>
> -
> int32_t
> main(int32_t argc, char **argv)
> {
> @@ -3512,6 +3511,8 @@ main(int32_t argc, char **argv)
> printf(" Done\n");
> }
>
> + flow_print_counters();
> +
> RTE_ETH_FOREACH_DEV(portid) {
> if ((enabled_port_mask & (1 << portid)) == 0)
> continue;
> --
> 2.35.3
next prev parent reply other threads:[~2022-06-17 9:52 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-19 8:25 [dpdk-dev] [PATCH] " psatheesh
2022-05-24 5:32 ` [dpdk-dev] [PATCH v2] " psatheesh
2022-06-03 3:16 ` [dpdk-dev] [PATCH v3] " psatheesh
2022-06-17 9:52 ` Zhang, Roy Fan [this message]
2022-06-17 10:59 ` Satheesh Paul Antonysamy
2022-06-17 10:57 ` [dpdk-dev] [PATCH v4] " psatheesh
2022-06-21 12:53 ` Akhil Goyal
2022-06-21 17:25 ` Akhil Goyal
2022-06-22 1:22 ` [dpdk-dev] [PATCH v5] " psatheesh
2022-06-23 8:35 ` Zhang, Roy Fan
2022-06-28 8:22 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=PH7PR11MB581737145FB5119C4DF1E14CB8AF9@PH7PR11MB5817.namprd11.prod.outlook.com \
--to=roy.fan.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=psatheesh@marvell.com \
--cc=radu.nicolau@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).