Dear DPDK Dev . This is PM from Advantech ENPD. We are working on Intel Amston Lake CPU's SGMII <> GPY215 PHY for DPDK test but fail. We consulted with Intel support team and they suggested we should consult DPDK community and it should have the patch or code change for Amston Lake <> GYP215 available for DPDK. Could you kindly suggest us the direction of it? I also keep my Engineering team in this mail loop for further discussion. Thank you so much The error message while we testing DPDK SoC 2.5G LAN (BIOS set to 1G) with dpdk 24.03.0. It can run testpmd test, and error message as follows : root@fwa-1214-efi:~/dpdk/dpdk-24.03/build/app# ./dpdk-testpmd -c 0xf -n 1 -a 00:1e.4 --socket-mem=2048,0 -- -i --mbcache=512 --numa --port-numa-config=0,0 --socket-num=0 --coremask=0x2 --nb-cores=1 --rxq=1 --txq=1 --portmask=0x1 --rxd=2048 --rxfreet=64 --rxpt=64 --rxht=8 --rxwt=0 --txd=2048 --txfreet=64 --txpt=64 --txht=0 --txwt=0 --burst=64 --txrst=64 --rss-ip -a EAL: Detected CPU lcores: 4 EAL: Detected NUMA nodes: 1 EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'PA' TELEMETRY: No legacy callbacks, legacy socket not created testpmd: No probed ethernet devices Interactive-mode selected Fail: input rxq (1) can't be greater than max_rx_queues (0) of port 0 EAL: Error - exiting with code: 1 Cause: rxq 1 invalid - must be >= 0 && <= 0 Thanks and Best Regards Jack Chen Tel: 886-2-2792-7818 Ext.1601 Jack.Chen@advantech.com Advantech Co., Ltd. Enterprise Networking Platform Division