From: "Chautru, Nicolas" <nicolas.chautru@intel.com>
To: Maxime Coquelin <maxime.coquelin@redhat.com>,
"Vargas, Hernan" <hernan.vargas@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>,
"gakhil@marvell.com" <gakhil@marvell.com>,
"trix@redhat.com" <trix@redhat.com>
Cc: "Zhang, Qi Z" <qi.z.zhang@intel.com>
Subject: RE: [PATCH v2 02/10] baseband/acc: queue allocation refactor
Date: Fri, 4 Oct 2024 18:19:04 +0000 [thread overview]
Message-ID: <SJ0PR11MB66947F63429319BAFFD13ADDF8722@SJ0PR11MB6694.namprd11.prod.outlook.com> (raw)
In-Reply-To: <e9ce564d-7c4d-476e-ae6b-528adb39d477@redhat.com>
Hi Maxime,
> -----Original Message-----
> From: Maxime Coquelin <maxime.coquelin@redhat.com>
> Sent: Friday, October 4, 2024 5:08 AM
> To: Vargas, Hernan <hernan.vargas@intel.com>; dev@dpdk.org;
> gakhil@marvell.com; trix@redhat.com
> Cc: Chautru, Nicolas <nicolas.chautru@intel.com>; Zhang, Qi Z
> <qi.z.zhang@intel.com>
> Subject: Re: [PATCH v2 02/10] baseband/acc: queue allocation refactor
>
>
>
> On 10/3/24 22:49, Hernan Vargas wrote:
> > Refactor to manage queue memory per operation more flexibly for VRB
> > devices.
> >
> > Signed-off-by: Hernan Vargas <hernan.vargas@intel.com>
> > ---
> > drivers/baseband/acc/acc_common.h | 5 +
> > drivers/baseband/acc/rte_vrb_pmd.c | 214 ++++++++++++++++++++---------
> > 2 files changed, 157 insertions(+), 62 deletions(-)
> >
> > diff --git a/drivers/baseband/acc/acc_common.h
> > b/drivers/baseband/acc/acc_common.h
> > index b1f81e73e68d..adbac0dcca70 100644
> > --- a/drivers/baseband/acc/acc_common.h
> > +++ b/drivers/baseband/acc/acc_common.h
> > @@ -149,6 +149,8 @@
> > #define VRB2_VF_ID_SHIFT 6
> >
> > #define ACC_MAX_FFT_WIN 16
> > +#define ACC_MAX_RING_BUFFER 64
> > +#define VRB2_MAX_Q_PER_OP 256
> >
> > extern int acc_common_logtype;
> >
> > @@ -581,6 +583,9 @@ struct acc_device {
> > void *sw_rings_base; /* Base addr of un-aligned memory for sw rings
> */
> > void *sw_rings; /* 64MBs of 64MB aligned memory for sw rings */
> > rte_iova_t sw_rings_iova; /* IOVA address of sw_rings */
> > + void *sw_rings_array[ACC_MAX_RING_BUFFER]; /* Array of aligned
> memory for sw rings. */
> > + rte_iova_t sw_rings_iova_array[ACC_MAX_RING_BUFFER]; /* Array
> of sw_rings IOVA. */
> > + uint32_t queue_index[ACC_MAX_RING_BUFFER]; /* Tracking queue
> index
> > +per ring buffer. */
> > /* Virtual address of the info memory routed to the this function under
> > * operation, whether it is PF or VF.
> > * HW may DMA information data at this location asynchronously diff
> > --git a/drivers/baseband/acc/rte_vrb_pmd.c
> > b/drivers/baseband/acc/rte_vrb_pmd.c
> > index bae01e563826..2c62a5b3e329 100644
> > --- a/drivers/baseband/acc/rte_vrb_pmd.c
> > +++ b/drivers/baseband/acc/rte_vrb_pmd.c
> > @@ -281,7 +281,7 @@ fetch_acc_config(struct rte_bbdev *dev)
> > /* Check the depth of the AQs. */
> > reg_len0 = acc_reg_read(d, d->reg_addr->depth_log0_offset);
> > reg_len1 = acc_reg_read(d, d->reg_addr->depth_log1_offset);
> > - for (acc = 0; acc < NUM_ACC; acc++) {
> > + for (acc = 0; acc < VRB1_NUM_ACCS; acc++) {
> > qtopFromAcc(&q_top, acc, acc_conf);
> > if (q_top->first_qgroup_index <
> ACC_NUM_QGRPS_PER_WORD)
> > q_top->aq_depth_log2 =
> > @@ -290,7 +290,7 @@ fetch_acc_config(struct rte_bbdev *dev)
> > q_top->aq_depth_log2 = (reg_len1 >> ((q_top-
> >first_qgroup_index -
> >
> ACC_NUM_QGRPS_PER_WORD) * 4)) & 0xF;
> > }
> > - } else {
> > + } else if (d->device_variant == VRB2_VARIANT) {
> > reg0 = acc_reg_read(d, d->reg_addr->qman_group_func);
> > reg1 = acc_reg_read(d, d->reg_addr->qman_group_func + 4);
> > reg2 = acc_reg_read(d, d->reg_addr->qman_group_func + 8);
> @@
> > -308,7 +308,7 @@ fetch_acc_config(struct rte_bbdev *dev)
> > idx = (reg2 >> ((qg %
> ACC_NUM_QGRPS_PER_WORD) * 4)) & 0x7;
> > else
> > idx = (reg3 >> ((qg %
> ACC_NUM_QGRPS_PER_WORD) * 4)) & 0x7;
> > - if (idx < VRB_NUM_ACCS) {
> > + if (idx < VRB2_NUM_ACCS) {
> > acc = qman_func_id[idx];
> > updateQtop(acc, qg, acc_conf, d);
> > }
> > @@ -321,7 +321,7 @@ fetch_acc_config(struct rte_bbdev *dev)
> > reg_len2 = acc_reg_read(d, d->reg_addr->depth_log0_offset +
> 8);
> > reg_len3 = acc_reg_read(d, d->reg_addr->depth_log0_offset +
> 12);
> >
> > - for (acc = 0; acc < NUM_ACC; acc++) {
> > + for (acc = 0; acc < VRB2_NUM_ACCS; acc++) {
> > qtopFromAcc(&q_top, acc, acc_conf);
> > if (q_top->first_qgroup_index /
> ACC_NUM_QGRPS_PER_WORD == 0)
> > q_top->aq_depth_log2 = (reg_len0 >> ((q_top-
> >first_qgroup_index
> > %
>
> This function could be much heavily refactored.
> If we look at was is actuallt performed, VRB1 and VRB2 logic is the same, just a
> couple of value differs (they could be set at probe time).
>
> I might propose something in the future.
>
> > @@ -543,6 +543,7 @@ vrb_setup_queues(struct rte_bbdev *dev, uint16_t
> num_queues, int socket_id)
> > {
> > uint32_t phys_low, phys_high, value;
> > struct acc_device *d = dev->data->dev_private;
> > + uint16_t queues_per_op, i;
> > int ret;
> >
> > if (d->pf_device && !d->acc_conf.pf_mode_en) { @@ -564,27 +565,37
> > @@ vrb_setup_queues(struct rte_bbdev *dev, uint16_t num_queues, int
> socket_id)
> > return -ENODEV;
> > }
> >
> > - alloc_sw_rings_min_mem(dev, d, num_queues, socket_id);
> > + if (d->device_variant == VRB1_VARIANT) {
> > + alloc_sw_rings_min_mem(dev, d, num_queues, socket_id);
> >
> > - /* If minimal memory space approach failed, then allocate
> > - * the 2 * 64MB block for the sw rings.
> > - */
> > - if (d->sw_rings == NULL)
> > - alloc_2x64mb_sw_rings_mem(dev, d, socket_id);
> > + /* If minimal memory space approach failed, then allocate
> > + * the 2 * 64MB block for the sw rings.
> > + */
> > + if (d->sw_rings == NULL)
> > + alloc_2x64mb_sw_rings_mem(dev, d, socket_id);
> >
> > - if (d->sw_rings == NULL) {
> > - rte_bbdev_log(NOTICE,
> > - "Failure allocating sw_rings memory");
> > - return -ENOMEM;
> > + if (d->sw_rings == NULL) {
> > + rte_bbdev_log(NOTICE, "Failure allocating sw_rings
> memory");
> > + return -ENOMEM;
> > + }
> > + } else if (d->device_variant == VRB2_VARIANT) {
> > + queues_per_op = RTE_MIN(VRB2_MAX_Q_PER_OP,
> num_queues);
> > + for (i = 0; i <= RTE_BBDEV_OP_MLDTS; i++) {
> > + alloc_sw_rings_min_mem(dev, d, queues_per_op,
> socket_id);
> > + if (d->sw_rings == NULL) {
> > + rte_bbdev_log(NOTICE, "Failure allocating
> sw_rings memory %d", i);
> > + return -ENOMEM;
> > + }
> > + /* Moves the pointer to the relevant array. */
> > + d->sw_rings_array[i] = d->sw_rings;
> > + d->sw_rings_iova_array[i] = d->sw_rings_iova;
> > + d->sw_rings = NULL;
> > + d->sw_rings_base = NULL;
> > + d->sw_rings_iova = 0;
> > + d->queue_index[i] = 0;
> > + }
> > }
> >
> > - /* Configure device with the base address for DMA descriptor rings.
> > - * Same descriptor rings used for UL and DL DMA Engines.
> > - * Note : Assuming only VF0 bundle is used for PF mode.
> > - */
> > - phys_high = (uint32_t)(d->sw_rings_iova >> 32);
> > - phys_low = (uint32_t)(d->sw_rings_iova & ~(ACC_SIZE_64MBYTE-1));
> > -
> > /* Read the populated cfg from device registers. */
> > fetch_acc_config(dev);
> >
> > @@ -599,20 +610,60 @@ vrb_setup_queues(struct rte_bbdev *dev,
> uint16_t num_queues, int socket_id)
> > if (d->pf_device)
> > acc_reg_write(d, VRB1_PfDmaAxiControl, 1);
> >
> > - acc_reg_write(d, d->reg_addr->dma_ring_ul5g_hi, phys_high);
> > - acc_reg_write(d, d->reg_addr->dma_ring_ul5g_lo, phys_low);
> > - acc_reg_write(d, d->reg_addr->dma_ring_dl5g_hi, phys_high);
> > - acc_reg_write(d, d->reg_addr->dma_ring_dl5g_lo, phys_low);
> > - acc_reg_write(d, d->reg_addr->dma_ring_ul4g_hi, phys_high);
> > - acc_reg_write(d, d->reg_addr->dma_ring_ul4g_lo, phys_low);
> > - acc_reg_write(d, d->reg_addr->dma_ring_dl4g_hi, phys_high);
> > - acc_reg_write(d, d->reg_addr->dma_ring_dl4g_lo, phys_low);
> > - acc_reg_write(d, d->reg_addr->dma_ring_fft_hi, phys_high);
> > - acc_reg_write(d, d->reg_addr->dma_ring_fft_lo, phys_low);
> > - if (d->device_variant == VRB2_VARIANT) {
> > - acc_reg_write(d, d->reg_addr->dma_ring_mld_hi, phys_high);
> > - acc_reg_write(d, d->reg_addr->dma_ring_mld_lo, phys_low);
> > + if (d->device_variant == VRB1_VARIANT) {
> > + /* Configure device with the base address for DMA descriptor
> rings.
> > + * Same descriptor rings used for UL and DL DMA Engines.
> > + * Note : Assuming only VF0 bundle is used for PF mode.
> > + */
> > + phys_high = (uint32_t)(d->sw_rings_iova >> 32);
> > + phys_low = (uint32_t)(d->sw_rings_iova &
> ~(ACC_SIZE_64MBYTE-1));
> > + acc_reg_write(d, d->reg_addr->dma_ring_ul5g_hi, phys_high);
> > + acc_reg_write(d, d->reg_addr->dma_ring_ul5g_lo, phys_low);
> > + acc_reg_write(d, d->reg_addr->dma_ring_dl5g_hi, phys_high);
> > + acc_reg_write(d, d->reg_addr->dma_ring_dl5g_lo, phys_low);
> > + acc_reg_write(d, d->reg_addr->dma_ring_ul4g_hi, phys_high);
> > + acc_reg_write(d, d->reg_addr->dma_ring_ul4g_lo, phys_low);
> > + acc_reg_write(d, d->reg_addr->dma_ring_dl4g_hi, phys_high);
> > + acc_reg_write(d, d->reg_addr->dma_ring_dl4g_lo, phys_low);
> > + acc_reg_write(d, d->reg_addr->dma_ring_fft_hi, phys_high);
> > + acc_reg_write(d, d->reg_addr->dma_ring_fft_lo, phys_low);
> > + } else if (d->device_variant == VRB2_VARIANT) {
> > + /* Configure device with the base address for DMA descriptor
> rings.
> > + * Different ring buffer used for each operation type.
> > + * Note : Assuming only VF0 bundle is used for PF mode.
> > + */
> > + acc_reg_write(d, d->reg_addr->dma_ring_ul5g_hi,
> > + (uint32_t)(d-
> >sw_rings_iova_array[RTE_BBDEV_OP_LDPC_DEC] >> 32));
> > + acc_reg_write(d, d->reg_addr->dma_ring_ul5g_lo,
> > + (uint32_t)(d-
> >sw_rings_iova_array[RTE_BBDEV_OP_LDPC_DEC]
> > + & ~(ACC_SIZE_64MBYTE - 1)));
> > + acc_reg_write(d, d->reg_addr->dma_ring_dl5g_hi,
> > + (uint32_t)(d-
> >sw_rings_iova_array[RTE_BBDEV_OP_LDPC_ENC] >> 32));
> > + acc_reg_write(d, d->reg_addr->dma_ring_dl5g_lo,
> > + (uint32_t)(d-
> >sw_rings_iova_array[RTE_BBDEV_OP_LDPC_ENC]
> > + & ~(ACC_SIZE_64MBYTE - 1)));
> > + acc_reg_write(d, d->reg_addr->dma_ring_ul4g_hi,
> > + (uint32_t)(d-
> >sw_rings_iova_array[RTE_BBDEV_OP_TURBO_DEC] >> 32));
> > + acc_reg_write(d, d->reg_addr->dma_ring_ul4g_lo,
> > + (uint32_t)(d-
> >sw_rings_iova_array[RTE_BBDEV_OP_TURBO_DEC]
> > + & ~(ACC_SIZE_64MBYTE - 1)));
> > + acc_reg_write(d, d->reg_addr->dma_ring_dl4g_hi,
> > + (uint32_t)(d-
> >sw_rings_iova_array[RTE_BBDEV_OP_TURBO_ENC] >> 32));
> > + acc_reg_write(d, d->reg_addr->dma_ring_dl4g_lo,
> > + (uint32_t)(d-
> >sw_rings_iova_array[RTE_BBDEV_OP_TURBO_ENC]
> > + & ~(ACC_SIZE_64MBYTE - 1)));
> > + acc_reg_write(d, d->reg_addr->dma_ring_fft_hi,
> > + (uint32_t)(d-
> >sw_rings_iova_array[RTE_BBDEV_OP_FFT] >> 32));
> > + acc_reg_write(d, d->reg_addr->dma_ring_fft_lo,
> > + (uint32_t)(d-
> >sw_rings_iova_array[RTE_BBDEV_OP_FFT]
> > + & ~(ACC_SIZE_64MBYTE - 1)));
> > + acc_reg_write(d, d->reg_addr->dma_ring_mld_hi,
> > + (uint32_t)(d-
> >sw_rings_iova_array[RTE_BBDEV_OP_MLDTS] >> 32));
> > + acc_reg_write(d, d->reg_addr->dma_ring_mld_lo,
> > + (uint32_t)(d-
> >sw_rings_iova_array[RTE_BBDEV_OP_MLDTS]
> > + & ~(ACC_SIZE_64MBYTE - 1)));
> > }
> > +
> > /*
> > * Configure Ring Size to the max queue ring size
> > * (used for wrapping purpose).
> > @@ -636,19 +687,21 @@ vrb_setup_queues(struct rte_bbdev *dev,
> uint16_t
> > num_queues, int socket_id)
> >
> > phys_high = (uint32_t)(d->tail_ptr_iova >> 32);
> > phys_low = (uint32_t)(d->tail_ptr_iova);
> > - acc_reg_write(d, d->reg_addr->tail_ptrs_ul5g_hi, phys_high);
> > - acc_reg_write(d, d->reg_addr->tail_ptrs_ul5g_lo, phys_low);
> > - acc_reg_write(d, d->reg_addr->tail_ptrs_dl5g_hi, phys_high);
> > - acc_reg_write(d, d->reg_addr->tail_ptrs_dl5g_lo, phys_low);
> > - acc_reg_write(d, d->reg_addr->tail_ptrs_ul4g_hi, phys_high);
> > - acc_reg_write(d, d->reg_addr->tail_ptrs_ul4g_lo, phys_low);
> > - acc_reg_write(d, d->reg_addr->tail_ptrs_dl4g_hi, phys_high);
> > - acc_reg_write(d, d->reg_addr->tail_ptrs_dl4g_lo, phys_low);
> > - acc_reg_write(d, d->reg_addr->tail_ptrs_fft_hi, phys_high);
> > - acc_reg_write(d, d->reg_addr->tail_ptrs_fft_lo, phys_low);
> > - if (d->device_variant == VRB2_VARIANT) {
> > - acc_reg_write(d, d->reg_addr->tail_ptrs_mld_hi, phys_high);
> > - acc_reg_write(d, d->reg_addr->tail_ptrs_mld_lo, phys_low);
> > + {
> > + acc_reg_write(d, d->reg_addr->tail_ptrs_ul5g_hi, phys_high);
> > + acc_reg_write(d, d->reg_addr->tail_ptrs_ul5g_lo, phys_low);
> > + acc_reg_write(d, d->reg_addr->tail_ptrs_dl5g_hi, phys_high);
> > + acc_reg_write(d, d->reg_addr->tail_ptrs_dl5g_lo, phys_low);
> > + acc_reg_write(d, d->reg_addr->tail_ptrs_ul4g_hi, phys_high);
> > + acc_reg_write(d, d->reg_addr->tail_ptrs_ul4g_lo, phys_low);
> > + acc_reg_write(d, d->reg_addr->tail_ptrs_dl4g_hi, phys_high);
> > + acc_reg_write(d, d->reg_addr->tail_ptrs_dl4g_lo, phys_low);
> > + acc_reg_write(d, d->reg_addr->tail_ptrs_fft_hi, phys_high);
> > + acc_reg_write(d, d->reg_addr->tail_ptrs_fft_lo, phys_low);
> > + if (d->device_variant == VRB2_VARIANT) {
> > + acc_reg_write(d, d->reg_addr->tail_ptrs_mld_hi,
> phys_high);
> > + acc_reg_write(d, d->reg_addr->tail_ptrs_mld_lo,
> phys_low);
> > + }
> > }
> >
> > ret = allocate_info_ring(dev);
> > @@ -684,8 +737,13 @@ vrb_setup_queues(struct rte_bbdev *dev, uint16_t
> num_queues, int socket_id)
> > rte_free(d->tail_ptrs);
> > d->tail_ptrs = NULL;
> > free_sw_rings:
> > - rte_free(d->sw_rings_base);
> > - d->sw_rings = NULL;
> > + if (d->device_variant == VRB1_VARIANT) {
> > + rte_free(d->sw_rings_base);
> > + d->sw_rings = NULL;
>
> It was not caught initially, but it looks akward to free sw_rings_base, and then
> set sw_rings to NULL.
> sw_rings_based should also be set to NULL.
>
> > + } else if (d->device_variant == VRB2_VARIANT) {
> > + for (i = 0; i <= RTE_BBDEV_OP_MLDTS; i++)
> > + rte_free(d->sw_rings_array[i]);
>
> Same here, you should set sw_rings_array[i] to NULL to avoid double free
> later.
I believe this is more historical and orthogonal to that commit.
I would prefer to clean that through another serie and apply same BKM consistently, and would not want to rush it.
OK with you?
>
> > + }
> >
> > return ret;
> > }
> > @@ -809,17 +867,34 @@ vrb_intr_enable(struct rte_bbdev *dev)
> > static int
> > vrb_dev_close(struct rte_bbdev *dev)
> > {
> > + int i;
> > struct acc_device *d = dev->data->dev_private;
> > +
> > vrb_check_ir(d);
> > - if (d->sw_rings_base != NULL) {
> > - rte_free(d->tail_ptrs);
> > - rte_free(d->info_ring);
> > - rte_free(d->sw_rings_base);
> > - rte_free(d->harq_layout);
> > - d->tail_ptrs = NULL;
> > - d->info_ring = NULL;
> > - d->sw_rings_base = NULL;
> > - d->harq_layout = NULL;
> > + if (d->device_variant == VRB1_VARIANT) {
> > + if (d->sw_rings_base != NULL) {
> > + rte_free(d->tail_ptrs);
> > + rte_free(d->info_ring);
> > + rte_free(d->sw_rings_base);
> > + rte_free(d->harq_layout);
> > + d->tail_ptrs = NULL;
> > + d->info_ring = NULL;
> > + d->sw_rings_base = NULL;
> > + d->harq_layout = NULL;
> > + }
>
> Actually, it would be cleanner to perform the free operations systematically, no
> need to check whether sw_rings_base is NULL.
Noted as above.
>
> > + } else if (d->device_variant == VRB2_VARIANT) {
> > + if (d->sw_rings_array[1] != NULL) {
>
> Why 1 and not 0? And as mentionned above this can be done unconditionnally.
Thanks. We can check to start from index zero indeed to match the allocation.
Arguably as an aside the queue zero is a special one but we can optimize this a bit in the future.
Thanks
>
> > + rte_free(d->tail_ptrs);
> > + rte_free(d->info_ring);
> > + rte_free(d->harq_layout);
> > + d->tail_ptrs = NULL;
> > + d->info_ring = NULL;
> > + d->harq_layout = NULL;
> > + for (i = 0; i <= RTE_BBDEV_OP_MLDTS; i++) {
> > + rte_free(d->sw_rings_array[i]);
> > + d->sw_rings_array[i] = NULL;
> > + }
> > + }
> > }
> > /* Ensure all in flight HW transactions are completed. */
> > usleep(ACC_LONG_WAIT);
> > @@ -890,8 +965,16 @@ vrb_queue_setup(struct rte_bbdev *dev, uint16_t
> queue_id,
> > }
> >
> > q->d = d;
> > - q->ring_addr = RTE_PTR_ADD(d->sw_rings, (d->sw_ring_size *
> queue_id));
> > - q->ring_addr_iova = d->sw_rings_iova + (d->sw_ring_size * queue_id);
> > + if (d->device_variant == VRB1_VARIANT) {
> > + q->ring_addr = RTE_PTR_ADD(d->sw_rings, (d->sw_ring_size *
> queue_id));
> > + q->ring_addr_iova = d->sw_rings_iova + (d->sw_ring_size *
> queue_id);
> > + } else if (d->device_variant == VRB2_VARIANT) {
> > + q->ring_addr = RTE_PTR_ADD(d->sw_rings_array[conf-
> >op_type],
> > + (d->sw_ring_size * d->queue_index[conf-
> >op_type]));
> > + q->ring_addr_iova = d->sw_rings_iova_array[conf->op_type] +
> > + (d->sw_ring_size * d->queue_index[conf-
> >op_type]);
> > + d->queue_index[conf->op_type]++;
> > + }
> >
> > /* Prepare the Ring with default descriptor format. */
> > union acc_dma_desc *desc = NULL;
> > @@ -1347,8 +1430,14 @@ vrb_dev_info_get(struct rte_bbdev *dev, struct
> rte_bbdev_driver_info *dev_info)
> > dev_info->queue_priority[RTE_BBDEV_OP_FFT] = d-
> >acc_conf.q_fft.num_qgroups;
> > dev_info->queue_priority[RTE_BBDEV_OP_MLDTS] = d-
> >acc_conf.q_mld.num_qgroups;
> > dev_info->max_num_queues = 0;
> > - for (i = RTE_BBDEV_OP_NONE; i <= RTE_BBDEV_OP_MLDTS; i++)
> > + for (i = RTE_BBDEV_OP_NONE; i <= RTE_BBDEV_OP_MLDTS; i++) {
> > + if (unlikely(dev_info->num_queues[i] >
> VRB2_MAX_Q_PER_OP)) {
> > + rte_bbdev_log(ERR, "Unexpected number of queues
> %d exposed for op %d",
> > + dev_info->num_queues[i], i);
> > + dev_info->num_queues[i] = VRB2_MAX_Q_PER_OP;
> > + }
> > dev_info->max_num_queues += dev_info->num_queues[i];
> > + }
> > dev_info->queue_size_lim = ACC_MAX_QUEUE_DEPTH;
> > dev_info->hardware_accelerated = true;
> > dev_info->max_dl_queue_priority =
> > @@ -4239,7 +4328,8 @@ vrb_bbdev_init(struct rte_bbdev *dev, struct
> rte_pci_driver *drv)
> > d->reg_addr = &vrb1_pf_reg_addr;
> > else
> > d->reg_addr = &vrb1_vf_reg_addr;
> > - } else {
> > + } else if ((pci_dev->id.device_id == RTE_VRB2_PF_DEVICE_ID) ||
> > + (pci_dev->id.device_id == RTE_VRB2_VF_DEVICE_ID)) {
> > d->device_variant = VRB2_VARIANT;
> > d->queue_offset = vrb2_queue_offset;
> > d->num_qgroups = VRB2_NUM_QGRPS;
next prev parent reply other threads:[~2024-10-04 18:19 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-03 20:49 [PATCH v2 00/10] acc baseband PMD fix and updates for 24.11 Hernan Vargas
2024-10-03 20:49 ` [PATCH v2 01/10] baseband/acc: fix access to deallocated mem Hernan Vargas
2024-10-03 20:49 ` [PATCH v2 02/10] baseband/acc: queue allocation refactor Hernan Vargas
2024-10-04 12:08 ` Maxime Coquelin
2024-10-04 18:19 ` Chautru, Nicolas [this message]
2024-10-03 20:49 ` [PATCH v2 03/10] baseband/acc: configure max queues per device Hernan Vargas
2024-10-03 20:49 ` [PATCH v2 04/10] baseband/acc: future proof structure comparison Hernan Vargas
2024-10-03 20:49 ` [PATCH v2 05/10] baseband/acc: enhance SW ring alignment Hernan Vargas
2024-10-03 20:49 ` [PATCH v2 06/10] baseband/acc: remove soft output bypass Hernan Vargas
2024-10-03 20:49 ` [PATCH v2 07/10] baseband/acc: algorithm tuning for LDPC decoder Hernan Vargas
2024-10-03 20:49 ` [PATCH v2 08/10] baseband/acc: remove check on HARQ memory Hernan Vargas
2024-10-03 20:49 ` [PATCH v2 09/10] baseband/acc: reset ring data valid bit Hernan Vargas
2024-10-03 20:49 ` [PATCH v2 10/10] baseband/acc: cosmetic changes Hernan Vargas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=SJ0PR11MB66947F63429319BAFFD13ADDF8722@SJ0PR11MB6694.namprd11.prod.outlook.com \
--to=nicolas.chautru@intel.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=hernan.vargas@intel.com \
--cc=maxime.coquelin@redhat.com \
--cc=qi.z.zhang@intel.com \
--cc=trix@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).