DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH v5 0/4] Add dual threading in QAT PMD
@ 2020-01-15 14:32 Arek Kusztal
  2020-01-15 14:32 ` [dpdk-dev] [PATCH v5 1/4] common/qat: remove tail write coalescing feature Arek Kusztal
                   ` (4 more replies)
  0 siblings, 5 replies; 6+ messages in thread
From: Arek Kusztal @ 2020-01-15 14:32 UTC (permalink / raw)
  To: dev; +Cc: akhil.goyal, fiona.trahe, declan.doherty, Arek Kusztal

Remove the limitation whereby enqueue and dequeue must be
done in same thread.
The inflight calculation is reworked to be thread-safe for 2
threads - note this is not general multi-thread support, i.e
all enqueues to a qp must still be done in one thread and
all dequeues must be done in one thread, but enqueues and
dequeues may be in separate threads.
As the tail-coalescing feature is not
threadsafe it is removed first.
Additional option added is to set minumum enqueue burst
threshold which may help to reduce MMIO write occurances.

v5:
- sent all patches in one patchset
v4:
- fixed checkpatch issues in 4th patch
v3:
- added minimum threshold option
v2:
- clarified wording in docs

Arek Kusztal (1):
  crypto/qat: add minimum enq threshold to qat pmd

Fiona Trahe (3):
  common/qat: remove tail write coalescing feature
  common/qat: move max inflights param into qp
  common/qat: add dual thread support

 doc/guides/compressdevs/qat_comp.rst |  5 +-
 doc/guides/cryptodevs/qat.rst        | 28 +++++++++-
 drivers/common/qat/qat_common.c      |  3 ++
 drivers/common/qat/qat_common.h      |  3 ++
 drivers/common/qat/qat_device.c      | 99 +++++++++++++++++++++++++++++++-----
 drivers/common/qat/qat_device.h      | 22 ++++++--
 drivers/common/qat/qat_qp.c          | 86 +++++++++++++++++--------------
 drivers/common/qat/qat_qp.h          | 14 +++--
 drivers/compress/qat/qat_comp_pmd.c  | 14 ++++-
 drivers/compress/qat/qat_comp_pmd.h  |  4 +-
 drivers/crypto/qat/qat_asym_pmd.c    | 14 ++++-
 drivers/crypto/qat/qat_asym_pmd.h    |  4 +-
 drivers/crypto/qat/qat_sym_pmd.c     | 14 ++++-
 drivers/crypto/qat/qat_sym_pmd.h     |  4 +-
 14 files changed, 243 insertions(+), 71 deletions(-)

-- 
2.1.0


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dpdk-dev] [PATCH v5 1/4] common/qat: remove tail write coalescing feature
  2020-01-15 14:32 [dpdk-dev] [PATCH v5 0/4] Add dual threading in QAT PMD Arek Kusztal
@ 2020-01-15 14:32 ` Arek Kusztal
  2020-01-15 14:32 ` [dpdk-dev] [PATCH v5 2/4] common/qat: move max inflights param into qp Arek Kusztal
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 6+ messages in thread
From: Arek Kusztal @ 2020-01-15 14:32 UTC (permalink / raw)
  To: dev; +Cc: akhil.goyal, fiona.trahe, declan.doherty, Arek Kusztal

From: Fiona Trahe <fiona.trahe@intel.com>

The feature Coalescing Tail Writes on Enqueue is removed
as it is not thread-safe and a dual-thread feature will be added shortly.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
---
 drivers/common/qat/qat_qp.c | 16 +++-------------
 drivers/common/qat/qat_qp.h |  6 ------
 2 files changed, 3 insertions(+), 19 deletions(-)

diff --git a/drivers/common/qat/qat_qp.c b/drivers/common/qat/qat_qp.c
index 03f11f8..01ddce0 100644
--- a/drivers/common/qat/qat_qp.c
+++ b/drivers/common/qat/qat_qp.c
@@ -538,7 +538,6 @@ static inline void
 txq_write_tail(struct qat_qp *qp, struct qat_queue *q) {
 	WRITE_CSR_RING_TAIL(qp->mmap_bar_addr, q->hw_bundle_number,
 			q->hw_queue_number, q->tail);
-	q->nb_pending_requests = 0;
 	q->csr_tail = q->tail;
 }
 
@@ -622,25 +621,20 @@ qat_enqueue_op_burst(void *qp, void **ops, uint16_t nb_ops)
 kick_tail:
 	queue->tail = tail;
 	tmp_qp->stats.enqueued_count += nb_ops_sent;
-	queue->nb_pending_requests += nb_ops_sent;
-	if (tmp_qp->inflights16 < QAT_CSR_TAIL_FORCE_WRITE_THRESH ||
-		    queue->nb_pending_requests > QAT_CSR_TAIL_WRITE_THRESH) {
-		txq_write_tail(tmp_qp, queue);
-	}
+	txq_write_tail(tmp_qp, queue);
 	return nb_ops_sent;
 }
 
 uint16_t
 qat_dequeue_op_burst(void *qp, void **ops, uint16_t nb_ops)
 {
-	struct qat_queue *rx_queue, *tx_queue;
+	struct qat_queue *rx_queue;
 	struct qat_qp *tmp_qp = (struct qat_qp *)qp;
 	uint32_t head;
 	uint32_t resp_counter = 0;
 	uint8_t *resp_msg;
 
 	rx_queue = &(tmp_qp->rx_q);
-	tx_queue = &(tmp_qp->tx_q);
 	head = rx_queue->head;
 	resp_msg = (uint8_t *)rx_queue->base_addr + rx_queue->head;
 
@@ -677,11 +671,7 @@ qat_dequeue_op_burst(void *qp, void **ops, uint16_t nb_ops)
 						QAT_CSR_HEAD_WRITE_THRESH)
 			rxq_free_desc(tmp_qp, rx_queue);
 	}
-	/* also check if tail needs to be advanced */
-	if (tmp_qp->inflights16 <= QAT_CSR_TAIL_FORCE_WRITE_THRESH &&
-		tx_queue->tail != tx_queue->csr_tail) {
-		txq_write_tail(tmp_qp, tx_queue);
-	}
+
 	return resp_counter;
 }
 
diff --git a/drivers/common/qat/qat_qp.h b/drivers/common/qat/qat_qp.h
index 980c2ba..9212ca4 100644
--- a/drivers/common/qat/qat_qp.h
+++ b/drivers/common/qat/qat_qp.h
@@ -11,10 +11,6 @@ struct qat_pci_device;
 
 #define QAT_CSR_HEAD_WRITE_THRESH 32U
 /* number of requests to accumulate before writing head CSR */
-#define QAT_CSR_TAIL_WRITE_THRESH 32U
-/* number of requests to accumulate before writing tail CSR */
-#define QAT_CSR_TAIL_FORCE_WRITE_THRESH 256U
-/* number of inflights below which no tail write coalescing should occur */
 
 typedef int (*build_request_t)(void *op,
 		uint8_t *req, void *op_cookie,
@@ -64,8 +60,6 @@ struct qat_queue {
 	uint32_t	csr_tail;		/* last written tail value */
 	uint16_t	nb_processed_responses;
 	/* number of responses processed since last CSR head write */
-	uint16_t	nb_pending_requests;
-	/* number of requests pending since last CSR tail write */
 };
 
 struct qat_qp {
-- 
2.1.0


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dpdk-dev] [PATCH v5 2/4] common/qat: move max inflights param into qp
  2020-01-15 14:32 [dpdk-dev] [PATCH v5 0/4] Add dual threading in QAT PMD Arek Kusztal
  2020-01-15 14:32 ` [dpdk-dev] [PATCH v5 1/4] common/qat: remove tail write coalescing feature Arek Kusztal
@ 2020-01-15 14:32 ` Arek Kusztal
  2020-01-15 14:32 ` [dpdk-dev] [PATCH v5 3/4] common/qat: add dual thread support Arek Kusztal
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 6+ messages in thread
From: Arek Kusztal @ 2020-01-15 14:32 UTC (permalink / raw)
  To: dev; +Cc: akhil.goyal, fiona.trahe, declan.doherty, Arek Kusztal

From: Fiona Trahe <fiona.trahe@intel.com>

The max_inflights parameter is moved from qat_queue to qat_qp as it's
a more appropriate location.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
---
 drivers/common/qat/qat_qp.c | 23 ++++++++++++-----------
 drivers/common/qat/qat_qp.h |  2 +-
 2 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/common/qat/qat_qp.c b/drivers/common/qat/qat_qp.c
index 01ddce0..8e4c74a 100644
--- a/drivers/common/qat/qat_qp.c
+++ b/drivers/common/qat/qat_qp.c
@@ -239,6 +239,15 @@ int qat_qp_setup(struct qat_pci_device *qat_dev,
 		goto create_err;
 	}
 
+	qp->max_inflights = ADF_MAX_INFLIGHTS(qp->tx_q.queue_size,
+				ADF_BYTES_TO_MSG_SIZE(qp->tx_q.msg_size));
+
+	if (qp->max_inflights < 2) {
+		QAT_LOG(ERR, "Invalid num inflights");
+		qat_queue_delete(&(qp->tx_q));
+		goto create_err;
+	}
+
 	if (qat_queue_create(qat_dev, &(qp->rx_q), qat_qp_conf,
 					ADF_RING_DIR_RX) != 0) {
 		QAT_LOG(ERR, "Rx queue create failed "
@@ -416,15 +425,7 @@ qat_queue_create(struct qat_pci_device *qat_dev, struct qat_queue *queue,
 		goto queue_create_err;
 	}
 
-	queue->max_inflights = ADF_MAX_INFLIGHTS(queue->queue_size,
-					ADF_BYTES_TO_MSG_SIZE(desc_size));
 	queue->modulo_mask = (1 << ADF_RING_SIZE_MODULO(queue->queue_size)) - 1;
-
-	if (queue->max_inflights < 2) {
-		QAT_LOG(ERR, "Invalid num inflights");
-		ret = -EINVAL;
-		goto queue_create_err;
-	}
 	queue->head = 0;
 	queue->tail = 0;
 	queue->msg_size = desc_size;
@@ -443,11 +444,11 @@ qat_queue_create(struct qat_pci_device *qat_dev, struct qat_queue *queue,
 			queue->hw_queue_number, queue_base);
 
 	QAT_LOG(DEBUG, "RING: Name:%s, size in CSR: %u, in bytes %u,"
-		" nb msgs %u, msg_size %u, max_inflights %u modulo mask %u",
+		" nb msgs %u, msg_size %u, modulo mask %u",
 			queue->memz_name,
 			queue->queue_size, queue_size_bytes,
 			qp_conf->nb_descriptors, desc_size,
-			queue->max_inflights, queue->modulo_mask);
+			queue->modulo_mask);
 
 	return 0;
 
@@ -590,7 +591,7 @@ qat_enqueue_op_burst(void *qp, void **ops, uint16_t nb_ops)
 
 	/* Find how many can actually fit on the ring */
 	tmp_qp->inflights16 += nb_ops;
-	overflow = tmp_qp->inflights16 - queue->max_inflights;
+	overflow = tmp_qp->inflights16 - tmp_qp->max_inflights;
 	if (overflow > 0) {
 		tmp_qp->inflights16 -= overflow;
 		nb_ops_possible = nb_ops - overflow;
diff --git a/drivers/common/qat/qat_qp.h b/drivers/common/qat/qat_qp.h
index 9212ca4..5066f06 100644
--- a/drivers/common/qat/qat_qp.h
+++ b/drivers/common/qat/qat_qp.h
@@ -51,7 +51,6 @@ struct qat_queue {
 	uint32_t	tail;			/* Shadow copy of the tail */
 	uint32_t	modulo_mask;
 	uint32_t	msg_size;
-	uint16_t	max_inflights;
 	uint32_t	queue_size;
 	uint8_t		hw_bundle_number;
 	uint8_t		hw_queue_number;
@@ -76,6 +75,7 @@ struct qat_qp {
 	enum qat_service_type service_type;
 	struct qat_pci_device *qat_dev;
 	/**< qat device this qp is on */
+	uint16_t max_inflights;
 } __rte_cache_aligned;
 
 extern const struct qat_qp_hw_data qat_gen1_qps[][ADF_MAX_QPS_ON_ANY_SERVICE];
-- 
2.1.0


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dpdk-dev] [PATCH v5 3/4] common/qat: add dual thread support
  2020-01-15 14:32 [dpdk-dev] [PATCH v5 0/4] Add dual threading in QAT PMD Arek Kusztal
  2020-01-15 14:32 ` [dpdk-dev] [PATCH v5 1/4] common/qat: remove tail write coalescing feature Arek Kusztal
  2020-01-15 14:32 ` [dpdk-dev] [PATCH v5 2/4] common/qat: move max inflights param into qp Arek Kusztal
@ 2020-01-15 14:32 ` Arek Kusztal
  2020-01-15 14:32 ` [dpdk-dev] [PATCH v5 4/4] crypto/qat: add minimum enq threshold to qat pmd Arek Kusztal
  2020-01-15 15:48 ` [dpdk-dev] [PATCH v5 0/4] Add dual threading in QAT PMD Akhil Goyal
  4 siblings, 0 replies; 6+ messages in thread
From: Arek Kusztal @ 2020-01-15 14:32 UTC (permalink / raw)
  To: dev; +Cc: akhil.goyal, fiona.trahe, declan.doherty, Arek Kusztal

From: Fiona Trahe <fiona.trahe@intel.com>

Remove the limitation whereby enqueue and dequeue must be
done in same thread.
The inflight calculation is reworked to be thread-safe for 2
threads - note this is not general multi-thread support, i.e
all enqueues to a qp must still be done in one thread and
all dequeues must be done in one thread, but enqueues and
dequeues may be in separate threads.
Documentation updated.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
---
 doc/guides/compressdevs/qat_comp.rst |  5 ++++-
 doc/guides/cryptodevs/qat.rst        | 10 +++++++--
 drivers/common/qat/qat_qp.c          | 40 +++++++++++++++++++++---------------
 drivers/common/qat/qat_qp.h          |  3 ++-
 4 files changed, 38 insertions(+), 20 deletions(-)

diff --git a/doc/guides/compressdevs/qat_comp.rst b/doc/guides/compressdevs/qat_comp.rst
index 6421f76..757611a 100644
--- a/doc/guides/compressdevs/qat_comp.rst
+++ b/doc/guides/compressdevs/qat_comp.rst
@@ -37,7 +37,10 @@ Limitations
 -----------
 
 * Compressdev level 0, no compression, is not supported.
-* Queue pairs are not thread-safe (that is, within a single queue pair, RX and TX from different lcores is not supported).
+* Queue-pairs are thread-safe on Intel CPUs but Queues are not (that is, within a single
+  queue-pair all enqueues to the TX queue must be done from one thread and all dequeues
+  from the RX queue must be done from one thread, but enqueues and dequeues may be done
+  in different threads.)
 * No BSD support as BSD QAT kernel driver not available.
 * When using Deflate dynamic huffman encoding for compression, the input size (op.src.length)
   must be < CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE from the config file,
diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
index 6197875..3a4a189 100644
--- a/doc/guides/cryptodevs/qat.rst
+++ b/doc/guides/cryptodevs/qat.rst
@@ -81,7 +81,10 @@ Limitations
 * No BSD support as BSD QAT kernel driver not available.
 * ZUC EEA3/EIA3 is not supported by dh895xcc devices
 * Maximum additional authenticated data (AAD) for GCM is 240 bytes long and must be passed to the device in a buffer rounded up to the nearest block-size multiple (x16) and padded with zeros.
-* Queue pairs are not thread-safe (that is, within a single queue pair, RX and TX from different lcores is not supported).
+* Queue-pairs are thread-safe on Intel CPUs but Queues are not (that is, within a single
+  queue-pair all enqueues to the TX queue must be done from one thread and all dequeues
+  from the RX queue must be done from one thread, but enqueues and dequeues may be done
+  in different threads.)
 * A GCM limitation exists, but only in the case where there are multiple
   generations of QAT devices on a single platform.
   To optimise performance, the GCM crypto session should be initialised for the
@@ -133,7 +136,10 @@ Limitations
 ~~~~~~~~~~~
 
 * Big integers longer than 4096 bits are not supported.
-* Queue pairs are not thread-safe (that is, within a single queue pair, RX and TX from different lcores is not supported).
+* Queue-pairs are thread-safe on Intel CPUs but Queues are not (that is, within a single
+  queue-pair all enqueues to the TX queue must be done from one thread and all dequeues
+  from the RX queue must be done from one thread, but enqueues and dequeues may be done
+  in different threads.)
 * RSA-2560, RSA-3584 are not supported
 
 .. _building_qat:
diff --git a/drivers/common/qat/qat_qp.c b/drivers/common/qat/qat_qp.c
index 8e4c74a..30cdc61 100644
--- a/drivers/common/qat/qat_qp.c
+++ b/drivers/common/qat/qat_qp.c
@@ -230,7 +230,7 @@ int qat_qp_setup(struct qat_pci_device *qat_dev,
 	}
 
 	qp->mmap_bar_addr = pci_dev->mem_resource[0].addr;
-	qp->inflights16 = 0;
+	qp->enqueued = qp->dequeued = 0;
 
 	if (qat_queue_create(qat_dev, &(qp->tx_q), qat_qp_conf,
 					ADF_RING_DIR_TX) != 0) {
@@ -321,7 +321,7 @@ int qat_qp_release(struct qat_qp **qp_addr)
 				qp->qat_dev->qat_dev_id);
 
 	/* Don't free memory if there are still responses to be processed */
-	if (qp->inflights16 == 0) {
+	if ((qp->enqueued - qp->dequeued) == 0) {
 		qat_queue_delete(&(qp->tx_q));
 		qat_queue_delete(&(qp->rx_q));
 	} else {
@@ -579,7 +579,6 @@ qat_enqueue_op_burst(void *qp, void **ops, uint16_t nb_ops)
 	uint16_t nb_ops_possible = nb_ops;
 	register uint8_t *base_addr;
 	register uint32_t tail;
-	int overflow;
 
 	if (unlikely(nb_ops == 0))
 		return 0;
@@ -590,13 +589,25 @@ qat_enqueue_op_burst(void *qp, void **ops, uint16_t nb_ops)
 	tail = queue->tail;
 
 	/* Find how many can actually fit on the ring */
-	tmp_qp->inflights16 += nb_ops;
-	overflow = tmp_qp->inflights16 - tmp_qp->max_inflights;
-	if (overflow > 0) {
-		tmp_qp->inflights16 -= overflow;
-		nb_ops_possible = nb_ops - overflow;
-		if (nb_ops_possible == 0)
-			return 0;
+	{
+		/* dequeued can only be written by one thread, but it may not
+		 * be this thread. As it's 4-byte aligned it will be read
+		 * atomically here by any Intel CPU.
+		 * enqueued can wrap before dequeued, but cannot
+		 * lap it as var size of enq/deq (uint32_t) > var size of
+		 * max_inflights (uint16_t). In reality inflights is never
+		 * even as big as max uint16_t, as it's <= ADF_MAX_DESC.
+		 * On wrapping, the calculation still returns the correct
+		 * positive value as all three vars are unsigned.
+		 */
+		uint32_t inflights =
+			tmp_qp->enqueued - tmp_qp->dequeued;
+
+		if ((inflights + nb_ops) > tmp_qp->max_inflights) {
+			nb_ops_possible = tmp_qp->max_inflights - inflights;
+			if (nb_ops_possible == 0)
+				return 0;
+		}
 	}
 
 	while (nb_ops_sent != nb_ops_possible) {
@@ -605,11 +616,7 @@ qat_enqueue_op_burst(void *qp, void **ops, uint16_t nb_ops)
 				tmp_qp->qat_dev_gen);
 		if (ret != 0) {
 			tmp_qp->stats.enqueue_err_count++;
-			/*
-			 * This message cannot be enqueued,
-			 * decrease number of ops that wasn't sent
-			 */
-			tmp_qp->inflights16 -= nb_ops_possible - nb_ops_sent;
+			/* This message cannot be enqueued */
 			if (nb_ops_sent == 0)
 				return 0;
 			goto kick_tail;
@@ -621,6 +628,7 @@ qat_enqueue_op_burst(void *qp, void **ops, uint16_t nb_ops)
 	}
 kick_tail:
 	queue->tail = tail;
+	tmp_qp->enqueued += nb_ops_sent;
 	tmp_qp->stats.enqueued_count += nb_ops_sent;
 	txq_write_tail(tmp_qp, queue);
 	return nb_ops_sent;
@@ -664,9 +672,9 @@ qat_dequeue_op_burst(void *qp, void **ops, uint16_t nb_ops)
 	}
 	if (resp_counter > 0) {
 		rx_queue->head = head;
+		tmp_qp->dequeued += resp_counter;
 		tmp_qp->stats.dequeued_count += resp_counter;
 		rx_queue->nb_processed_responses += resp_counter;
-		tmp_qp->inflights16 -= resp_counter;
 
 		if (rx_queue->nb_processed_responses >
 						QAT_CSR_HEAD_WRITE_THRESH)
diff --git a/drivers/common/qat/qat_qp.h b/drivers/common/qat/qat_qp.h
index 5066f06..8b9ab79 100644
--- a/drivers/common/qat/qat_qp.h
+++ b/drivers/common/qat/qat_qp.h
@@ -63,7 +63,6 @@ struct qat_queue {
 
 struct qat_qp {
 	void			*mmap_bar_addr;
-	uint16_t		inflights16;
 	struct qat_queue	tx_q;
 	struct qat_queue	rx_q;
 	struct qat_common_stats stats;
@@ -75,6 +74,8 @@ struct qat_qp {
 	enum qat_service_type service_type;
 	struct qat_pci_device *qat_dev;
 	/**< qat device this qp is on */
+	uint32_t enqueued;
+	uint32_t dequeued __rte_aligned(4);
 	uint16_t max_inflights;
 } __rte_cache_aligned;
 
-- 
2.1.0


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dpdk-dev] [PATCH v5 4/4] crypto/qat: add minimum enq threshold to qat pmd
  2020-01-15 14:32 [dpdk-dev] [PATCH v5 0/4] Add dual threading in QAT PMD Arek Kusztal
                   ` (2 preceding siblings ...)
  2020-01-15 14:32 ` [dpdk-dev] [PATCH v5 3/4] common/qat: add dual thread support Arek Kusztal
@ 2020-01-15 14:32 ` Arek Kusztal
  2020-01-15 15:48 ` [dpdk-dev] [PATCH v5 0/4] Add dual threading in QAT PMD Akhil Goyal
  4 siblings, 0 replies; 6+ messages in thread
From: Arek Kusztal @ 2020-01-15 14:32 UTC (permalink / raw)
  To: dev; +Cc: akhil.goyal, fiona.trahe, declan.doherty, Arek Kusztal

This patch adds minimum enqueue threshold to Intel
QuickAssist Technology PMD.
It is an optimisation, configured by a command line option,
which can be used to reduce MMIO write occurrences.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
---
 doc/guides/cryptodevs/qat.rst       | 18 +++++++
 drivers/common/qat/qat_common.c     |  3 ++
 drivers/common/qat/qat_common.h     |  3 ++
 drivers/common/qat/qat_device.c     | 99 ++++++++++++++++++++++++++++++++-----
 drivers/common/qat/qat_device.h     | 22 +++++++--
 drivers/common/qat/qat_qp.c         | 11 +++++
 drivers/common/qat/qat_qp.h         |  3 ++
 drivers/compress/qat/qat_comp_pmd.c | 14 +++++-
 drivers/compress/qat/qat_comp_pmd.h |  4 +-
 drivers/crypto/qat/qat_asym_pmd.c   | 14 +++++-
 drivers/crypto/qat/qat_asym_pmd.h   |  4 +-
 drivers/crypto/qat/qat_sym_pmd.c    | 14 +++++-
 drivers/crypto/qat/qat_sym_pmd.h    |  4 +-
 13 files changed, 191 insertions(+), 22 deletions(-)

diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
index 3a4a189..dc79b60 100644
--- a/doc/guides/cryptodevs/qat.rst
+++ b/doc/guides/cryptodevs/qat.rst
@@ -243,6 +243,24 @@ allocated while for GEN1 devices, 12 buffers are allocated, plus 1472 bytes over
 	larger than the input size).
 
 
+Running QAT PMD with minimum threshold for burst size
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+If only a small number or packets can be enqueued. Each enqueue causes an expensive MMIO write.
+These MMIO write occurrences can be optimised by setting any of the following parameters
+- qat_sym_enq_threshold
+- qat_asym_enq_threshold
+- qat_comp_enq_threshold
+When any of these parameters is set rte_cryptodev_enqueue_burst function will
+return 0 (thereby avoiding an MMIO) if the device is congested and number of packets
+possible to enqueue is smaller.
+To use this feature the user must set the parameter on process start as a device additional parameter:
+ .example: '-w 03:01.1,qat_sym_enq_threshold=32,qat_comp_enq_threshold=16'
+All parameters can be used with the same device regardless of order. Parameters are separated
+by comma. When the same parameter is used more than once first occurrence of the parameter
+is used.
+Maximum threshold that can be set is 32.
+
 Device and driver naming
 ~~~~~~~~~~~~~~~~~~~~~~~~
 
diff --git a/drivers/common/qat/qat_common.c b/drivers/common/qat/qat_common.c
index 4753866..5343a14 100644
--- a/drivers/common/qat/qat_common.c
+++ b/drivers/common/qat/qat_common.c
@@ -94,6 +94,9 @@ void qat_stats_get(struct qat_pci_device *dev,
 		stats->dequeued_count += qp[i]->stats.dequeued_count;
 		stats->enqueue_err_count += qp[i]->stats.enqueue_err_count;
 		stats->dequeue_err_count += qp[i]->stats.dequeue_err_count;
+		stats->threshold_hit_count += qp[i]->stats.threshold_hit_count;
+		QAT_LOG(DEBUG, "Threshold was used for qp %d %"PRIu64" times",
+				i, stats->threshold_hit_count);
 	}
 }
 
diff --git a/drivers/common/qat/qat_common.h b/drivers/common/qat/qat_common.h
index de9a3ba..cf840fe 100644
--- a/drivers/common/qat/qat_common.h
+++ b/drivers/common/qat/qat_common.h
@@ -61,6 +61,9 @@ struct qat_common_stats {
 	/**< Total error count on operations enqueued */
 	uint64_t dequeue_err_count;
 	/**< Total error count on operations dequeued */
+	uint64_t threshold_hit_count;
+	/**< Total number of times min qp threshold condition was fulfilled */
+
 };
 
 struct qat_pci_device;
diff --git a/drivers/common/qat/qat_device.c b/drivers/common/qat/qat_device.c
index 2a1cf3e..2b41d9a 100644
--- a/drivers/common/qat/qat_device.c
+++ b/drivers/common/qat/qat_device.c
@@ -3,6 +3,8 @@
  */
 
 #include <rte_string_fns.h>
+#include <rte_devargs.h>
+#include <ctype.h>
 
 #include "qat_device.h"
 #include "adf_transport_access_macros.h"
@@ -105,12 +107,71 @@ qat_get_qat_dev_from_pci_dev(struct rte_pci_device *pci_dev)
 	return qat_pci_get_named_dev(name);
 }
 
+static void qat_dev_parse_cmd(const char *str, struct qat_dev_cmd_param
+		*qat_dev_cmd_param)
+{
+	int i = 0;
+	const char *param;
+
+	while (1) {
+		char value_str[4] = { };
+
+		param = qat_dev_cmd_param[i].name;
+		if (param == NULL)
+			return;
+		long value = 0;
+		const char *arg = strstr(str, param);
+		const char *arg2 = NULL;
+
+		if (arg) {
+			arg2 = arg + strlen(param);
+			if (*arg2 != '=') {
+				QAT_LOG(DEBUG, "parsing error '=' sign"
+						" should immediately follow %s",
+						param);
+				arg2 = NULL;
+			} else
+				arg2++;
+		} else {
+			QAT_LOG(DEBUG, "%s not provided", param);
+		}
+		if (arg2) {
+			int iter = 0;
+			while (iter < 2) {
+				if (!isdigit(*(arg2 + iter)))
+					break;
+				iter++;
+			}
+			if (!iter) {
+				QAT_LOG(DEBUG, "parsing error %s"
+					       " no number provided",
+					       param);
+			} else {
+				memcpy(value_str, arg2, iter);
+				value = strtol(value_str, NULL, 10);
+				if (value > MAX_QP_THRESHOLD_SIZE) {
+					QAT_LOG(DEBUG, "Exceeded max size of"
+						" threshold, setting to %d",
+						MAX_QP_THRESHOLD_SIZE);
+					value = MAX_QP_THRESHOLD_SIZE;
+				}
+				QAT_LOG(DEBUG, "parsing %s = %ld",
+						param, value);
+			}
+		}
+		qat_dev_cmd_param[i].val = value;
+		i++;
+	}
+}
+
 struct qat_pci_device *
-qat_pci_device_allocate(struct rte_pci_device *pci_dev)
+qat_pci_device_allocate(struct rte_pci_device *pci_dev,
+		struct qat_dev_cmd_param *qat_dev_cmd_param)
 {
 	struct qat_pci_device *qat_dev;
 	uint8_t qat_dev_id;
 	char name[QAT_DEV_NAME_MAX_LEN];
+	struct rte_devargs *devargs = pci_dev->device.devargs;
 
 	rte_pci_device_name(&pci_dev->addr, name, sizeof(name));
 	snprintf(name+strlen(name), QAT_DEV_NAME_MAX_LEN-strlen(name), "_qat");
@@ -148,6 +209,9 @@ qat_pci_device_allocate(struct rte_pci_device *pci_dev)
 		return NULL;
 	}
 
+	if (devargs && devargs->drv_str)
+		qat_dev_parse_cmd(devargs->drv_str, qat_dev_cmd_param);
+
 	rte_spinlock_init(&qat_dev->arb_csr_lock);
 
 	qat_dev->attached = QAT_ATTACHED;
@@ -199,37 +263,45 @@ qat_pci_dev_destroy(struct qat_pci_device *qat_pci_dev,
 static int qat_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
 		struct rte_pci_device *pci_dev)
 {
-	int ret = 0;
+	int sym_ret = 0, asym_ret = 0, comp_ret = 0;
 	int num_pmds_created = 0;
 	struct qat_pci_device *qat_pci_dev;
+	struct qat_dev_cmd_param qat_dev_cmd_param[] = {
+			{ SYM_ENQ_THRESHOLD_NAME, 0 },
+			{ ASYM_ENQ_THRESHOLD_NAME, 0 },
+			{ COMP_ENQ_THRESHOLD_NAME, 0 },
+			{ NULL, 0 },
+	};
 
 	QAT_LOG(DEBUG, "Found QAT device at %02x:%02x.%x",
 			pci_dev->addr.bus,
 			pci_dev->addr.devid,
 			pci_dev->addr.function);
 
-	qat_pci_dev = qat_pci_device_allocate(pci_dev);
+	qat_pci_dev = qat_pci_device_allocate(pci_dev, qat_dev_cmd_param);
 	if (qat_pci_dev == NULL)
 		return -ENODEV;
 
-	ret = qat_sym_dev_create(qat_pci_dev);
-	if (ret == 0)
+	sym_ret = qat_sym_dev_create(qat_pci_dev, qat_dev_cmd_param);
+	if (sym_ret == 0) {
 		num_pmds_created++;
+
+	}
 	else
 		QAT_LOG(WARNING,
 				"Failed to create QAT SYM PMD on device %s",
 				qat_pci_dev->name);
 
-	ret = qat_comp_dev_create(qat_pci_dev);
-	if (ret == 0)
+	comp_ret = qat_comp_dev_create(qat_pci_dev, qat_dev_cmd_param);
+	if (comp_ret == 0)
 		num_pmds_created++;
 	else
 		QAT_LOG(WARNING,
 				"Failed to create QAT COMP PMD on device %s",
 				qat_pci_dev->name);
 
-	ret = qat_asym_dev_create(qat_pci_dev);
-	if (ret == 0)
+	asym_ret = qat_asym_dev_create(qat_pci_dev, qat_dev_cmd_param);
+	if (asym_ret == 0)
 		num_pmds_created++;
 	else
 		QAT_LOG(WARNING,
@@ -264,13 +336,15 @@ static struct rte_pci_driver rte_qat_pmd = {
 };
 
 __rte_weak int
-qat_sym_dev_create(struct qat_pci_device *qat_pci_dev __rte_unused)
+qat_sym_dev_create(struct qat_pci_device *qat_pci_dev __rte_unused,
+		struct qat_dev_cmd_param *qat_dev_cmd_param __rte_unused)
 {
 	return 0;
 }
 
 __rte_weak int
-qat_asym_dev_create(struct qat_pci_device *qat_pci_dev __rte_unused)
+qat_asym_dev_create(struct qat_pci_device *qat_pci_dev __rte_unused,
+		struct qat_dev_cmd_param *qat_dev_cmd_param __rte_unused)
 {
 	return 0;
 }
@@ -288,7 +362,8 @@ qat_asym_dev_destroy(struct qat_pci_device *qat_pci_dev __rte_unused)
 }
 
 __rte_weak int
-qat_comp_dev_create(struct qat_pci_device *qat_pci_dev __rte_unused)
+qat_comp_dev_create(struct qat_pci_device *qat_pci_dev __rte_unused,
+		struct qat_dev_cmd_param *qat_dev_cmd_param __rte_unused)
 {
 	return 0;
 }
diff --git a/drivers/common/qat/qat_device.h b/drivers/common/qat/qat_device.h
index 131375e..09a4c55 100644
--- a/drivers/common/qat/qat_device.h
+++ b/drivers/common/qat/qat_device.h
@@ -16,6 +16,16 @@
 
 #define QAT_DEV_NAME_MAX_LEN	64
 
+#define SYM_ENQ_THRESHOLD_NAME "qat_sym_enq_threshold"
+#define ASYM_ENQ_THRESHOLD_NAME "qat_asym_enq_threshold"
+#define COMP_ENQ_THRESHOLD_NAME "qat_comp_enq_threshold"
+#define MAX_QP_THRESHOLD_SIZE	32
+
+struct qat_dev_cmd_param {
+	const char *name;
+	uint16_t val;
+};
+
 enum qat_comp_num_im_buffers {
 	QAT_NUM_INTERM_BUFS_GEN1 = 12,
 	QAT_NUM_INTERM_BUFS_GEN2 = 20,
@@ -94,7 +104,8 @@ struct qat_gen_hw_data {
 extern struct qat_gen_hw_data qat_gen_config[];
 
 struct qat_pci_device *
-qat_pci_device_allocate(struct rte_pci_device *pci_dev);
+qat_pci_device_allocate(struct rte_pci_device *pci_dev,
+		struct qat_dev_cmd_param *qat_dev_cmd_param);
 
 int
 qat_pci_device_release(struct rte_pci_device *pci_dev);
@@ -104,10 +115,12 @@ qat_get_qat_dev_from_pci_dev(struct rte_pci_device *pci_dev);
 
 /* declaration needed for weak functions */
 int
-qat_sym_dev_create(struct qat_pci_device *qat_pci_dev __rte_unused);
+qat_sym_dev_create(struct qat_pci_device *qat_pci_dev __rte_unused,
+		struct qat_dev_cmd_param *qat_dev_cmd_param);
 
 int
-qat_asym_dev_create(struct qat_pci_device *qat_pci_dev __rte_unused);
+qat_asym_dev_create(struct qat_pci_device *qat_pci_dev __rte_unused,
+		struct qat_dev_cmd_param *qat_dev_cmd_param);
 
 int
 qat_sym_dev_destroy(struct qat_pci_device *qat_pci_dev __rte_unused);
@@ -116,7 +129,8 @@ int
 qat_asym_dev_destroy(struct qat_pci_device *qat_pci_dev __rte_unused);
 
 int
-qat_comp_dev_create(struct qat_pci_device *qat_pci_dev __rte_unused);
+qat_comp_dev_create(struct qat_pci_device *qat_pci_dev __rte_unused,
+		struct qat_dev_cmd_param *qat_dev_cmd_param);
 
 int
 qat_comp_dev_destroy(struct qat_pci_device *qat_pci_dev __rte_unused);
diff --git a/drivers/common/qat/qat_qp.c b/drivers/common/qat/qat_qp.c
index 30cdc61..9958789 100644
--- a/drivers/common/qat/qat_qp.c
+++ b/drivers/common/qat/qat_qp.c
@@ -608,8 +608,19 @@ qat_enqueue_op_burst(void *qp, void **ops, uint16_t nb_ops)
 			if (nb_ops_possible == 0)
 				return 0;
 		}
+		/* QAT has plenty of work queued already, so don't waste cycles
+		 * enqueueing, wait til the application has gathered a bigger
+		 * burst or some completed ops have been dequeued
+		 */
+		if (tmp_qp->min_enq_burst_threshold && inflights >
+				QAT_QP_MIN_INFL_THRESHOLD && nb_ops_possible <
+				tmp_qp->min_enq_burst_threshold) {
+			tmp_qp->stats.threshold_hit_count++;
+			return 0;
+		}
 	}
 
+
 	while (nb_ops_sent != nb_ops_possible) {
 		ret = tmp_qp->build_request(*ops, base_addr + tail,
 				tmp_qp->op_cookies[tail / queue->msg_size],
diff --git a/drivers/common/qat/qat_qp.h b/drivers/common/qat/qat_qp.h
index 8b9ab79..0b95ea3 100644
--- a/drivers/common/qat/qat_qp.h
+++ b/drivers/common/qat/qat_qp.h
@@ -12,6 +12,8 @@ struct qat_pci_device;
 #define QAT_CSR_HEAD_WRITE_THRESH 32U
 /* number of requests to accumulate before writing head CSR */
 
+#define QAT_QP_MIN_INFL_THRESHOLD	256
+
 typedef int (*build_request_t)(void *op,
 		uint8_t *req, void *op_cookie,
 		enum qat_device_gen qat_dev_gen);
@@ -77,6 +79,7 @@ struct qat_qp {
 	uint32_t enqueued;
 	uint32_t dequeued __rte_aligned(4);
 	uint16_t max_inflights;
+	uint16_t min_enq_burst_threshold;
 } __rte_cache_aligned;
 
 extern const struct qat_qp_hw_data qat_gen1_qps[][ADF_MAX_QPS_ON_ANY_SERVICE];
diff --git a/drivers/compress/qat/qat_comp_pmd.c b/drivers/compress/qat/qat_comp_pmd.c
index 05b7dfe..7d4fdf1 100644
--- a/drivers/compress/qat/qat_comp_pmd.c
+++ b/drivers/compress/qat/qat_comp_pmd.c
@@ -139,6 +139,7 @@ qat_comp_qp_setup(struct rte_compressdev *dev, uint16_t qp_id,
 								= *qp_addr;
 
 	qp = (struct qat_qp *)*qp_addr;
+	qp->min_enq_burst_threshold = qat_private->min_enq_burst_threshold;
 
 	for (i = 0; i < qp->nb_descriptors; i++) {
 
@@ -660,8 +661,10 @@ static const struct rte_driver compdev_qat_driver = {
 	.alias = qat_comp_drv_name
 };
 int
-qat_comp_dev_create(struct qat_pci_device *qat_pci_dev)
+qat_comp_dev_create(struct qat_pci_device *qat_pci_dev,
+		struct qat_dev_cmd_param *qat_dev_cmd_param)
 {
+	int i = 0;
 	if (qat_pci_dev->qat_dev_gen == QAT_GEN3) {
 		QAT_LOG(ERR, "Compression PMD not supported on QAT c4xxx");
 		return 0;
@@ -719,6 +722,15 @@ qat_comp_dev_create(struct qat_pci_device *qat_pci_dev)
 		break;
 	}
 
+	while (1) {
+		if (qat_dev_cmd_param[i].name == NULL)
+			break;
+		if (!strcmp(qat_dev_cmd_param[i].name, COMP_ENQ_THRESHOLD_NAME))
+			comp_dev->min_enq_burst_threshold =
+					qat_dev_cmd_param[i].val;
+		i++;
+	}
+
 	QAT_LOG(DEBUG,
 		    "Created QAT COMP device %s as compressdev instance %d",
 			name, compressdev->data->dev_id);
diff --git a/drivers/compress/qat/qat_comp_pmd.h b/drivers/compress/qat/qat_comp_pmd.h
index 6979de1..5c7fa9f 100644
--- a/drivers/compress/qat/qat_comp_pmd.h
+++ b/drivers/compress/qat/qat_comp_pmd.h
@@ -32,10 +32,12 @@ struct qat_comp_dev_private {
 	/**< The device's pool for qat_comp_xforms */
 	struct rte_mempool *streampool;
 	/**< The device's pool for qat_comp_streams */
+	uint16_t min_enq_burst_threshold;
 };
 
 int
-qat_comp_dev_create(struct qat_pci_device *qat_pci_dev);
+qat_comp_dev_create(struct qat_pci_device *qat_pci_dev,
+		struct qat_dev_cmd_param *qat_dev_cmd_param);
 
 int
 qat_comp_dev_destroy(struct qat_pci_device *qat_pci_dev);
diff --git a/drivers/crypto/qat/qat_asym_pmd.c b/drivers/crypto/qat/qat_asym_pmd.c
index c8a52b6..cdf10de 100644
--- a/drivers/crypto/qat/qat_asym_pmd.c
+++ b/drivers/crypto/qat/qat_asym_pmd.c
@@ -160,6 +160,7 @@ static int qat_asym_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
 							= *qp_addr;
 
 	qp = (struct qat_qp *)*qp_addr;
+	qp->min_enq_burst_threshold = qat_private->min_enq_burst_threshold;
 
 	for (i = 0; i < qp->nb_descriptors; i++) {
 		int j;
@@ -235,8 +236,10 @@ static const struct rte_driver cryptodev_qat_asym_driver = {
 };
 
 int
-qat_asym_dev_create(struct qat_pci_device *qat_pci_dev)
+qat_asym_dev_create(struct qat_pci_device *qat_pci_dev,
+		struct qat_dev_cmd_param *qat_dev_cmd_param)
 {
+	int i = 0;
 	struct rte_cryptodev_pmd_init_params init_params = {
 			.name = "",
 			.socket_id = qat_pci_dev->pci_dev->device.numa_node,
@@ -281,6 +284,15 @@ qat_asym_dev_create(struct qat_pci_device *qat_pci_dev)
 	internals->asym_dev_id = cryptodev->data->dev_id;
 	internals->qat_dev_capabilities = qat_gen1_asym_capabilities;
 
+	while (1) {
+		if (qat_dev_cmd_param[i].name == NULL)
+			break;
+		if (!strcmp(qat_dev_cmd_param[i].name, ASYM_ENQ_THRESHOLD_NAME))
+			internals->min_enq_burst_threshold =
+					qat_dev_cmd_param[i].val;
+		i++;
+	}
+
 	QAT_LOG(DEBUG, "Created QAT ASYM device %s as cryptodev instance %d",
 			cryptodev->data->name, internals->asym_dev_id);
 	return 0;
diff --git a/drivers/crypto/qat/qat_asym_pmd.h b/drivers/crypto/qat/qat_asym_pmd.h
index 895d0f6..0535bc6 100644
--- a/drivers/crypto/qat/qat_asym_pmd.h
+++ b/drivers/crypto/qat/qat_asym_pmd.h
@@ -26,6 +26,7 @@ struct qat_asym_dev_private {
 	/**< Device instance for this rte_cryptodev */
 	const struct rte_cryptodev_capabilities *qat_dev_capabilities;
 	/* QAT device asymmetric crypto capabilities */
+	uint16_t min_enq_burst_threshold;
 };
 
 uint16_t
@@ -42,7 +43,8 @@ int qat_asym_session_configure(struct rte_cryptodev *dev,
 		struct rte_mempool *mempool);
 
 int
-qat_asym_dev_create(struct qat_pci_device *qat_pci_dev);
+qat_asym_dev_create(struct qat_pci_device *qat_pci_dev,
+		struct qat_dev_cmd_param *qat_dev_cmd_param);
 
 int
 qat_asym_dev_destroy(struct qat_pci_device *qat_pci_dev);
diff --git a/drivers/crypto/qat/qat_sym_pmd.c b/drivers/crypto/qat/qat_sym_pmd.c
index 71f21ce..666ede7 100644
--- a/drivers/crypto/qat/qat_sym_pmd.c
+++ b/drivers/crypto/qat/qat_sym_pmd.c
@@ -169,6 +169,7 @@ static int qat_sym_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
 							= *qp_addr;
 
 	qp = (struct qat_qp *)*qp_addr;
+	qp->min_enq_burst_threshold = qat_private->min_enq_burst_threshold;
 
 	for (i = 0; i < qp->nb_descriptors; i++) {
 
@@ -237,8 +238,10 @@ static const struct rte_driver cryptodev_qat_sym_driver = {
 };
 
 int
-qat_sym_dev_create(struct qat_pci_device *qat_pci_dev)
+qat_sym_dev_create(struct qat_pci_device *qat_pci_dev,
+		struct qat_dev_cmd_param *qat_dev_cmd_param __rte_unused)
 {
+	int i = 0;
 	struct rte_cryptodev_pmd_init_params init_params = {
 			.name = "",
 			.socket_id = qat_pci_dev->pci_dev->device.numa_node,
@@ -302,6 +305,15 @@ qat_sym_dev_create(struct qat_pci_device *qat_pci_dev)
 		break;
 	}
 
+	while (1) {
+		if (qat_dev_cmd_param[i].name == NULL)
+			break;
+		if (!strcmp(qat_dev_cmd_param[i].name, SYM_ENQ_THRESHOLD_NAME))
+			internals->min_enq_burst_threshold =
+					qat_dev_cmd_param[i].val;
+		i++;
+	}
+
 	QAT_LOG(DEBUG, "Created QAT SYM device %s as cryptodev instance %d",
 			cryptodev->data->name, internals->sym_dev_id);
 	return 0;
diff --git a/drivers/crypto/qat/qat_sym_pmd.h b/drivers/crypto/qat/qat_sym_pmd.h
index 7ddaf45..a32c25a 100644
--- a/drivers/crypto/qat/qat_sym_pmd.h
+++ b/drivers/crypto/qat/qat_sym_pmd.h
@@ -28,10 +28,12 @@ struct qat_sym_dev_private {
 	/**< Device instance for this rte_cryptodev */
 	const struct rte_cryptodev_capabilities *qat_dev_capabilities;
 	/* QAT device symmetric crypto capabilities */
+	uint16_t min_enq_burst_threshold;
 };
 
 int
-qat_sym_dev_create(struct qat_pci_device *qat_pci_dev);
+qat_sym_dev_create(struct qat_pci_device *qat_pci_dev,
+		struct qat_dev_cmd_param *qat_dev_cmd_param);
 
 int
 qat_sym_dev_destroy(struct qat_pci_device *qat_pci_dev);
-- 
2.1.0


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [dpdk-dev] [PATCH v5 0/4] Add dual threading in QAT PMD
  2020-01-15 14:32 [dpdk-dev] [PATCH v5 0/4] Add dual threading in QAT PMD Arek Kusztal
                   ` (3 preceding siblings ...)
  2020-01-15 14:32 ` [dpdk-dev] [PATCH v5 4/4] crypto/qat: add minimum enq threshold to qat pmd Arek Kusztal
@ 2020-01-15 15:48 ` Akhil Goyal
  4 siblings, 0 replies; 6+ messages in thread
From: Akhil Goyal @ 2020-01-15 15:48 UTC (permalink / raw)
  To: Arek Kusztal, dev; +Cc: fiona.trahe, declan.doherty

> 
> Remove the limitation whereby enqueue and dequeue must be
> done in same thread.
> The inflight calculation is reworked to be thread-safe for 2
> threads - note this is not general multi-thread support, i.e
> all enqueues to a qp must still be done in one thread and
> all dequeues must be done in one thread, but enqueues and
> dequeues may be in separate threads.
> As the tail-coalescing feature is not
> threadsafe it is removed first.
> Additional option added is to set minumum enqueue burst
> threshold which may help to reduce MMIO write occurances.
> 
> v5:
> - sent all patches in one patchset
> v4:
> - fixed checkpatch issues in 4th patch
> v3:
> - added minimum threshold option
> v2:
> - clarified wording in docs
> 
> Arek Kusztal (1):
>   crypto/qat: add minimum enq threshold to qat pmd
> 
> Fiona Trahe (3):
>   common/qat: remove tail write coalescing feature
>   common/qat: move max inflights param into qp
>   common/qat: add dual thread support
> 
>  doc/guides/compressdevs/qat_comp.rst |  5 +-
>  doc/guides/cryptodevs/qat.rst        | 28 +++++++++-
>  drivers/common/qat/qat_common.c      |  3 ++
>  drivers/common/qat/qat_common.h      |  3 ++
>  drivers/common/qat/qat_device.c      | 99
> +++++++++++++++++++++++++++++++-----
>  drivers/common/qat/qat_device.h      | 22 ++++++--
>  drivers/common/qat/qat_qp.c          | 86 +++++++++++++++++--------------
>  drivers/common/qat/qat_qp.h          | 14 +++--
>  drivers/compress/qat/qat_comp_pmd.c  | 14 ++++-
>  drivers/compress/qat/qat_comp_pmd.h  |  4 +-
>  drivers/crypto/qat/qat_asym_pmd.c    | 14 ++++-
>  drivers/crypto/qat/qat_asym_pmd.h    |  4 +-
>  drivers/crypto/qat/qat_sym_pmd.c     | 14 ++++-
>  drivers/crypto/qat/qat_sym_pmd.h     |  4 +-
>  14 files changed, 243 insertions(+), 71 deletions(-)
> 

Series Applied to dpdk-next-crypto

Thanks

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2020-01-15 15:48 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-15 14:32 [dpdk-dev] [PATCH v5 0/4] Add dual threading in QAT PMD Arek Kusztal
2020-01-15 14:32 ` [dpdk-dev] [PATCH v5 1/4] common/qat: remove tail write coalescing feature Arek Kusztal
2020-01-15 14:32 ` [dpdk-dev] [PATCH v5 2/4] common/qat: move max inflights param into qp Arek Kusztal
2020-01-15 14:32 ` [dpdk-dev] [PATCH v5 3/4] common/qat: add dual thread support Arek Kusztal
2020-01-15 14:32 ` [dpdk-dev] [PATCH v5 4/4] crypto/qat: add minimum enq threshold to qat pmd Arek Kusztal
2020-01-15 15:48 ` [dpdk-dev] [PATCH v5 0/4] Add dual threading in QAT PMD Akhil Goyal

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).