[dpdk-dev] [PATCH] app/testpmd:vlan filter fail

[dpdk-dev] [PATCH] app/testpmd:vlan filter fail

[Yanglong Wu]

Removing out port_conf.rxmode.hw_vlan_filter = 1
will let it equal to 0 and port_conf.rxmode.offloads
is assigned as 0 again if hw_vlan_filter = 1. So it
will always lead to fail for vlan filter setting

Fix:0074d02fc(convert to new Rx offloads API)
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
---
 app/test-pmd/testpmd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 5dc8ccac5..0751e573c 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -2328,7 +2328,7 @@ init_port_dcb_config(portid_t pid,
 	retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
 	if (retval < 0)
 		return retval;
-	port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
+	port_conf.rxmode.hw_vlan_filter = 1;
 
 	/**
 	 * Write the configuration into the device.
-- 
2.11.0

Re: [dpdk-dev] [PATCH] app/testpmd:vlan filter fail

[Shahaf Shuler]

Hi Wu,

Indeed there is an issue here, but this is not the right fix.

Friday, February 2, 2018 7:10 AM, Yanglong Wu:
> Subject: [PATCH] app/testpmd:vlan filter fail
> 
> Removing out port_conf.rxmode.hw_vlan_filter = 1 will let it equal to 0 and
> port_conf.rxmode.offloads is assigned as 0 again if hw_vlan_filter = 1. So it
> will always lead to fail for vlan filter setting
> 
> Fix:0074d02fc(convert to new Rx offloads API)
> Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
> ---
>  app/test-pmd/testpmd.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
> 5dc8ccac5..0751e573c 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -2328,7 +2328,7 @@ init_port_dcb_config(portid_t pid,
>  	retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs,
> pfc_en);
>  	if (retval < 0)
>  		return retval;
> -	port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
> +	port_conf.rxmode.hw_vlan_filter = 1;

The VLAN filter resets because the rxmode.ignore_offload_bitfield is not set. If it was set, the ethdev rxmode convert functions would have convert the new flag to the old API (rxmode.hw_vlan_filter).

Am not much familiar with this configuration but here is a suggested fix:

diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index d8ac43268..caf282386 100644                           
--- a/app/test-pmd/testpmd.c                                
+++ b/app/test-pmd/testpmd.c                                
@@ -2324,6 +2324,8 @@ init_port_dcb_config(portid_t pid,    
        rte_port = &ports[pid];                             
                                                            
        memset(&port_conf, 0, sizeof(struct rte_eth_conf)); 
+       port_conf.rxmode = rte_port->dev_conf.rxmode;       
+       port_conf.txmode = rte_port->dev_conf.txmode;       
        /* Enter DCB configuration status */                
        dcb_config = 1;                                     
                                                            

The port_conf for the dcb configuration will inherit the same configuration of the port (which has the ignore_offload_bitfield set).
Otherwise, at least the rxmode.ignore_offload_bitfield must be set. 
> 
>  	/**
>  	 * Write the configuration into the device.
> --
> 2.11.0

Re: [dpdk-dev] [PATCH] app/testpmd:vlan filter fail

[Wu, Yanglong]

Hi,
Thanks for your review. I got it!

Yanglong Wu
-----Original Message-----
From: Shahaf Shuler [mailto:shahafs@mellanox.com] 
Sent: Sunday, February 4, 2018 2:27 PM
To: Wu, Yanglong <yanglong.wu@intel.com>; dev@dpdk.org
Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>
Subject: RE: [PATCH] app/testpmd:vlan filter fail

Hi Wu,

Indeed there is an issue here, but this is not the right fix.

Friday, February 2, 2018 7:10 AM, Yanglong Wu:
> Subject: [PATCH] app/testpmd:vlan filter fail
> 
> Removing out port_conf.rxmode.hw_vlan_filter = 1 will let it equal to 
> 0 and port_conf.rxmode.offloads is assigned as 0 again if 
> hw_vlan_filter = 1. So it will always lead to fail for vlan filter 
> setting
> 
> Fix:0074d02fc(convert to new Rx offloads API)
> Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
> ---
>  app/test-pmd/testpmd.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index 
> 5dc8ccac5..0751e573c 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -2328,7 +2328,7 @@ init_port_dcb_config(portid_t pid,
>  	retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
>  	if (retval < 0)
>  		return retval;
> -	port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
> +	port_conf.rxmode.hw_vlan_filter = 1;

The VLAN filter resets because the rxmode.ignore_offload_bitfield is not set. If it was set, the ethdev rxmode convert functions would have convert the new flag to the old API (rxmode.hw_vlan_filter).

Am not much familiar with this configuration but here is a suggested fix:

diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index d8ac43268..caf282386 100644                           
--- a/app/test-pmd/testpmd.c                                
+++ b/app/test-pmd/testpmd.c                                
@@ -2324,6 +2324,8 @@ init_port_dcb_config(portid_t pid,    
        rte_port = &ports[pid];                             
                                                            
        memset(&port_conf, 0, sizeof(struct rte_eth_conf)); 
+       port_conf.rxmode = rte_port->dev_conf.rxmode;       
+       port_conf.txmode = rte_port->dev_conf.txmode;       
        /* Enter DCB configuration status */                
        dcb_config = 1;                                     
                                                            

The port_conf for the dcb configuration will inherit the same configuration of the port (which has the ignore_offload_bitfield set).
Otherwise, at least the rxmode.ignore_offload_bitfield must be set. 
> 
>  	/**
>  	 * Write the configuration into the device.
> --
> 2.11.0

[dpdk-dev] [PATCH v2] app/testpmd:vlan filter fail

[Yanglong Wu]

This bug is caused by miss port configuration.
The port_conf for the DCB configuration should
inherit the same configuration of the port.

Fix:0074d02fc(convert to new Rx offloads API)
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
---
v2:
changing patch accoding to the review
---
 app/test-pmd/testpmd.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 5dc8ccac5..da1d9bd3a 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -2324,6 +2324,9 @@ init_port_dcb_config(portid_t pid,
 	/* Enter DCB configuration status */
 	dcb_config = 1;

+	port_conf.rxmode = rte_port->dev_conf.rxmode;
+	port_conf.txmode = rte_port->dev_conf.txmode;
+
 	/*set configuration of DCB in vt mode and DCB in non-vt mode*/
 	retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
 	if (retval < 0)
-- 
2.11.0

Re: [dpdk-dev] [PATCH v2] app/testpmd:vlan filter fail

[Shahaf Shuler]

Hi Wu,

Few small comment. 

Monday, February 5, 2018 4:34 AM, Yanglong Wu:
> Subject: [PATCH v2] app/testpmd:vlan filter fail

The commit title can better describe the patch, something like: "app/testpmd: fix port DCB configuration"

> 
> This bug is caused by miss port configuration.

The above line is not needed. 

> The port_conf for the DCB configuration should inherit the same
> configuration of the port.
> 
> Fix:0074d02fc(convert to new Rx offloads API)

It needs to be :

Fixes: 0074d02fca21 ("app/testpmd: convert to new Rx offloads API")

> Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
> ---
> v2:
> changing patch accoding to the review
> ---
>  app/test-pmd/testpmd.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
> 5dc8ccac5..da1d9bd3a 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -2324,6 +2324,9 @@ init_port_dcb_config(portid_t pid,
>  	/* Enter DCB configuration status */
>  	dcb_config = 1;
> 
> +	port_conf.rxmode = rte_port->dev_conf.rxmode;
> +	port_conf.txmode = rte_port->dev_conf.txmode;
> +
>  	/*set configuration of DCB in vt mode and DCB in non-vt mode*/
>  	retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs,
> pfc_en);
>  	if (retval < 0)
> --

Otherwise  - Acked-by: Shahaf Shuler <shahafs@mellanox.com>

> 2.11.0

Re: [dpdk-dev] [PATCH v2] app/testpmd:vlan filter fail

[Wu, Yanglong]

Thx! I will change it right now

-----Original Message-----
From: Shahaf Shuler [mailto:shahafs@mellanox.com] 
Sent: Monday, February 5, 2018 2:14 PM
To: Wu, Yanglong <yanglong.wu@intel.com>; dev@dpdk.org
Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>
Subject: RE: [PATCH v2] app/testpmd:vlan filter fail

Hi Wu,

Few small comment. 

Monday, February 5, 2018 4:34 AM, Yanglong Wu:
> Subject: [PATCH v2] app/testpmd:vlan filter fail

The commit title can better describe the patch, something like: "app/testpmd: fix port DCB configuration"

> 
> This bug is caused by miss port configuration.

The above line is not needed. 

> The port_conf for the DCB configuration should inherit the same 
> configuration of the port.
> 
> Fix:0074d02fc(convert to new Rx offloads API)

It needs to be :

Fixes: 0074d02fca21 ("app/testpmd: convert to new Rx offloads API")

> Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
> ---
> v2:
> changing patch accoding to the review
> ---
>  app/test-pmd/testpmd.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index 
> 5dc8ccac5..da1d9bd3a 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -2324,6 +2324,9 @@ init_port_dcb_config(portid_t pid,
>  	/* Enter DCB configuration status */
>  	dcb_config = 1;
> 
> +	port_conf.rxmode = rte_port->dev_conf.rxmode;
> +	port_conf.txmode = rte_port->dev_conf.txmode;
> +
>  	/*set configuration of DCB in vt mode and DCB in non-vt mode*/
>  	retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
>  	if (retval < 0)
> --

Otherwise  - Acked-by: Shahaf Shuler <shahafs@mellanox.com>

> 2.11.0

[dpdk-dev] [PATCH v3] app/testpmd: fix port_id alloction issue

[Yanglong Wu]

In the feature of increasing port_id range from 8 bits to 16 bits,
vlan port_id allocation function was forget to substitute UINT8 with
UINT16, so the vlan port_id was allocated as a inccrete number.

Fixes:28caa76aea71 ("app/testpmd: fix port id type")

Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Reviewed-by: Zhiyong Yang <zhiyong.yang@intel.com>
---
v2:
modified commit message
---
v3:
add review tag
---
 app/test-pmd/cmdline.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index f71d96301..8990ebf6b 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -3352,7 +3352,7 @@ cmdline_parse_token_num_t cmd_vlan_tpid_tpid =
 			      tp_id, UINT16);
 cmdline_parse_token_num_t cmd_vlan_tpid_portid =
 	TOKEN_NUM_INITIALIZER(struct cmd_vlan_tpid_result,
-			      port_id, UINT8);
+			      port_id, UINT16);
 
 cmdline_parse_inst_t cmd_vlan_tpid = {
 	.f = cmd_vlan_tpid_parsed,
-- 
2.11.0

Re: [dpdk-dev] [PATCH v3] app/testpmd: fix port_id alloction issue

[Yang, Zhiyong]

It seems that the patch has been applied by Thomas. Please check mail list.

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Yanglong Wu
> Sent: Monday, February 5, 2018 3:53 PM
> To: dev@dpdk.org
> Cc: shahafs@mellanox.com; Lu, Wenzhuo <wenzhuo.lu@intel.com>; Wu,
> Yanglong <yanglong.wu@intel.com>
> Subject: [dpdk-dev] [PATCH v3] app/testpmd: fix port_id alloction issue
> 
> In the feature of increasing port_id range from 8 bits to 16 bits, vlan port_id
> allocation function was forget to substitute UINT8 with UINT16, so the vlan
> port_id was allocated as a inccrete number.
> 
> Fixes:28caa76aea71 ("app/testpmd: fix port id type")
> 
> Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
> Reviewed-by: Zhiyong Yang <zhiyong.yang@intel.com>
> ---

[dpdk-dev] [PATCH v3] app/testpmd: fix port DCB configuration

[Yanglong Wu]

The port_conf for the DCB configuration should
inherit the same configuration of the port.

Fix:0074d02fc("app/testpmd: convert to new Rx offloads API")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
---
v2:
changing patch accoding to review
---
v3:
changing patch accoding to comments
---
 app/test-pmd/testpmd.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 5dc8ccac5..da1d9bd3a 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -2324,6 +2324,9 @@ init_port_dcb_config(portid_t pid,
 	/* Enter DCB configuration status */
 	dcb_config = 1;
 
+	port_conf.rxmode = rte_port->dev_conf.rxmode;
+	port_conf.txmode = rte_port->dev_conf.txmode;
+
 	/*set configuration of DCB in vt mode and DCB in non-vt mode*/
 	retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
 	if (retval < 0)
-- 
2.11.0

Re: [dpdk-dev] [PATCH v3] app/testpmd: fix port DCB configuration

[Shahaf Shuler]

Monday, February 5, 2018 10:48 AM, Yanglong Wu:
> Fix:0074d02fc("app/testpmd: convert to new Rx offloads API")

The fix line is still wrong. Use the one I suggested.

> Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
> ---
> v2:
> changing patch accoding to review
> ---
> v3:
> changing patch accoding to comments
> ---
>  app/test-pmd/testpmd.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
> 5dc8ccac5..da1d9bd3a 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -2324,6 +2324,9 @@ init_port_dcb_config(portid_t pid,
>  	/* Enter DCB configuration status */
>  	dcb_config = 1;
> 
> +	port_conf.rxmode = rte_port->dev_conf.rxmode;
> +	port_conf.txmode = rte_port->dev_conf.txmode;
> +
>  	/*set configuration of DCB in vt mode and DCB in non-vt mode*/
>  	retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs,
> pfc_en);
>  	if (retval < 0)
> --
> 2.11.0

Acked-by: Shahaf Shuler <shahafs@mellanox.com> (please include this on the next version if any). 

[dpdk-dev] [PATCH v4] app/testpmd: fix port DCB configuration

[Yanglong Wu]

The port_conf for the DCB configuration should
inherit the same configuration of the port.

Fixes: 0074d02fca21("app/testpmd: convert to new Rx offloads API")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
---
v2:
changing patch accoding to review
---
v3:
changing patch accoding to comments
---
v4:
changing patch accoding to comments
---
 app/test-pmd/testpmd.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 5dc8ccac5..da1d9bd3a 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -2324,6 +2324,9 @@ init_port_dcb_config(portid_t pid,
 	/* Enter DCB configuration status */
 	dcb_config = 1;
 
+	port_conf.rxmode = rte_port->dev_conf.rxmode;
+	port_conf.txmode = rte_port->dev_conf.txmode;
+
 	/*set configuration of DCB in vt mode and DCB in non-vt mode*/
 	retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
 	if (retval < 0)
-- 
2.11.0

[dpdk-dev] [PATCH v4] app/testpmd: fix port DCB configuration

[Yanglong Wu]

The port_conf for the DCB configuration should
inherit the same configuration of the port.

Fixes: 0074d02fca21("app/testpmd: convert to new Rx offloads API")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>

Acked-by: Shahaf Shuler <shahafs@mellanox.com>
---
v2:
changing patch accoding to review
---
v3:
changing patch accoding to comments
---
v4:
changing patch accoding to comments
---
 app/test-pmd/testpmd.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 5dc8ccac5..da1d9bd3a 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -2324,6 +2324,9 @@ init_port_dcb_config(portid_t pid,
 	/* Enter DCB configuration status */
 	dcb_config = 1;
 
+	port_conf.rxmode = rte_port->dev_conf.rxmode;
+	port_conf.txmode = rte_port->dev_conf.txmode;
+
 	/*set configuration of DCB in vt mode and DCB in non-vt mode*/
 	retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
 	if (retval < 0)
-- 
2.11.0

Re: [dpdk-dev] [PATCH v4] app/testpmd: fix port DCB configuration

[Zhang, Helin]

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Yanglong Wu
> Sent: Monday, February 5, 2018 5:56 PM
> To: dev@dpdk.org
> Cc: shahafs@mellanox.com; Lu, Wenzhuo; Wu, Yanglong
> Subject: [dpdk-dev] [PATCH v4] app/testpmd: fix port DCB configuration
> 
> The port_conf for the DCB configuration should inherit the same configuration
> of the port.
> 
> Fixes: 0074d02fca21("app/testpmd: convert to new Rx offloads API")
> Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
> 
> Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Applied to dpdk-next-net-intel, thanks!

/Helin

[dpdk-dev] [PATCH] app/testpmd:vlan filter fail

[Yanglong Wu]

And-operartion with a constant will
always lead to fail for vlan filter.

fix:0074d02fc(convert to new Rx offloads API)
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
---
 lib/librte_ether/rte_ethdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index f285ba278..d468bb4a1 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -2288,7 +2288,7 @@ rte_eth_dev_vlan_filter(uint16_t port_id, uint16_t vlan_id, int on)
 
 	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
 	dev = &rte_eth_devices[port_id];
-	if (!(dev->data->dev_conf.rxmode.offloads &
+	if (!(dev->data->dev_conf.rxmode.offloads ||
 	      DEV_RX_OFFLOAD_VLAN_FILTER)) {
 		RTE_PMD_DEBUG_TRACE("port %d: vlan-filtering disabled\n", port_id);
 		return -ENOSYS;
-- 
2.11.0

Re: [dpdk-dev] [PATCH] app/testpmd:vlan filter fail

[Thomas Monjalon]

01/02/2018 02:26, Yanglong Wu:
> And-operartion with a constant will
> always lead to fail for vlan filter.
> 
> fix:0074d02fc(convert to new Rx offloads API)
> Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
[...]
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -2288,7 +2288,7 @@ rte_eth_dev_vlan_filter(uint16_t port_id, uint16_t vlan_id, int on)
>  
>  	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>  	dev = &rte_eth_devices[port_id];
> -	if (!(dev->data->dev_conf.rxmode.offloads &
> +	if (!(dev->data->dev_conf.rxmode.offloads ||
>  	      DEV_RX_OFFLOAD_VLAN_FILTER)) {
>  		RTE_PMD_DEBUG_TRACE("port %d: vlan-filtering disabled\n", port_id);
>  		return -ENOSYS;

This patch is wrong.

If you are trying to use VLAN filtering with testpmd,
you must enable it with --enable-hw-vlan-filter.

Re: [dpdk-dev] [PATCH] app/testpmd:vlan filter fail

[Shahaf Shuler]

Thursday, February 1, 2018 3:27 AM, Yanglong Wu:
> And-operartion with a constant will
> always lead to fail for vlan filter.

It will work after  dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER , right?

I don't understand what this patch tries to fix. 

> 
> fix:0074d02fc(convert to new Rx offloads API)
> Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
> ---
>  lib/librte_ether/rte_ethdev.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> index f285ba278..d468bb4a1 100644
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -2288,7 +2288,7 @@ rte_eth_dev_vlan_filter(uint16_t port_id, uint16_t
> vlan_id, int on)
> 
>  	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>  	dev = &rte_eth_devices[port_id];
> -	if (!(dev->data->dev_conf.rxmode.offloads &
> +	if (!(dev->data->dev_conf.rxmode.offloads ||
>  	      DEV_RX_OFFLOAD_VLAN_FILTER)) {
>  		RTE_PMD_DEBUG_TRACE("port %d: vlan-filtering
> disabled\n", port_id);
>  		return -ENOSYS;
> --
> 2.11.0

Re: [dpdk-dev] [PATCH] app/testpmd:vlan filter fail

[Wu, Yanglong]

Hi,
This patch is wrong, but there is bug absolutely. 
The problem can be stated as following：
in your patch(0074d02fc),
@@ -2224,7 +2221,7 @@ init_port_dcb_config(portid_t pid,
        retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
        if (retval < 0)
                return retval;
-       port_conf.rxmode.hw_vlan_filter = 1;
+       port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
You remove out port_conf.rxmode.hw_vlan_filter = 1 and assign port_conf.rxmode.offloads directly, so here port_conf.rxmode.hw_vlan_filter will equal to 0 and port_conf.rxmode.offloads will equal to DEV_RX_OFFLOAD_VLAN_FILTER, right?
 
But next in the function rte_eth_dev_configure(pid, 0, 0, &port_conf)  --> rte_eth_convert_rx_offload_bitfield , it will assign port_conf.rxmode.offloads  according to value of port_conf.rxmode.hw_vlan_filter again. As you remove out port_conf.rxmode.hw_vlan_filter = 1 and it equal to 0 now,  port_conf.rxmode.offloads is assigned as 0 again. So it will always lead to fail for vlan filter setting.

So I think port_Conf.rxmode.hw_vlan_filter should equeal to 1 and removing out  port_conf.rxmode.hw_vlan_filter = 1 will leads it assigning as a wrong number and vlan filter failing. So port_conf.rxmode.hw_vlan_filter = 1 shouldn’t be removed out, do you think so? 
I will add this line and  sent patch again

Wu yanglong
-----Original Message-----
From: Shahaf Shuler [mailto:shahafs@mellanox.com] 
Sent: Thursday, February 1, 2018 1:58 PM
To: Wu, Yanglong <yanglong.wu@intel.com>; dev@dpdk.org
Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>
Subject: RE: [PATCH] app/testpmd:vlan filter fail

Thursday, February 1, 2018 3:27 AM, Yanglong Wu:
> And-operartion with a constant will
> always lead to fail for vlan filter.

It will work after  dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER , right?

I don't understand what this patch tries to fix. 

> 
> fix:0074d02fc(convert to new Rx offloads API)
> Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
> ---
>  lib/librte_ether/rte_ethdev.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/lib/librte_ether/rte_ethdev.c 
> b/lib/librte_ether/rte_ethdev.c index f285ba278..d468bb4a1 100644
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -2288,7 +2288,7 @@ rte_eth_dev_vlan_filter(uint16_t port_id, 
> uint16_t vlan_id, int on)
> 
>  	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>  	dev = &rte_eth_devices[port_id];
> -	if (!(dev->data->dev_conf.rxmode.offloads &
> +	if (!(dev->data->dev_conf.rxmode.offloads ||
>  	      DEV_RX_OFFLOAD_VLAN_FILTER)) {
>  		RTE_PMD_DEBUG_TRACE("port %d: vlan-filtering disabled\n", port_id);
>  		return -ENOSYS;
> --
> 2.11.0