From: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
To: dev@dpdk.org
Cc: Kumar Sanghvi <kumaras@chelsio.com>,
Felix Marti <felix@chelsio.com>,
Nirranjan Kirubaharan <nirranjan@chelsio.com>
Subject: [dpdk-dev] [PATCH 4/5] config: enable cxgbe PMD for compilation and linking.
Date: Fri, 22 May 2015 18:54:22 +0530 [thread overview]
Message-ID: <a62f238e4522f61c6dc03a8f0650a934cf62e06c.1432300701.git.rahul.lakkireddy@chelsio.com> (raw)
In-Reply-To: <cover.1432300701.git.rahul.lakkireddy@chelsio.com>
In-Reply-To: <cover.1432300701.git.rahul.lakkireddy@chelsio.com>
Changes to:
1. config/common_linuxapp to add macros for cxgbe pmd.
2. lib/Makefile to add cxgbe pmd to the compile list.
3. mk/rte.app.mk to add cxgbe pmd to link.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
config/common_linuxapp | 10 ++++++++++
lib/Makefile | 1 +
mk/rte.app.mk | 1 +
3 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 0078dc9..dfafd45 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -208,6 +208,16 @@ CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
#
+# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
+#
+CONFIG_RTE_LIBRTE_CXGBE_PMD=y
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
+
+#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
diff --git a/lib/Makefile b/lib/Makefile
index d94355d..19beb28 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -46,6 +46,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += librte_pmd_ixgbe
DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += librte_pmd_i40e
DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += librte_pmd_fm10k
DIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += librte_pmd_mlx4
+DIRS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += librte_pmd_cxgbe
DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += librte_pmd_enic
DIRS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += librte_pmd_bond
DIRS-$(CONFIG_RTE_LIBRTE_PMD_RING) += librte_pmd_ring
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 1a2043a..0ed9651 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -128,6 +128,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
_LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
_LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4
+_LDLIBS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += -lrte_pmd_cxgbe
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_RING) += -lrte_pmd_ring
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP) += -lrte_pmd_pcap
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET) += -lrte_pmd_af_packet
--
1.7.1
next prev parent reply other threads:[~2015-05-22 13:25 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-22 13:24 [dpdk-dev] [PATCH 0/5] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Rahul Lakkireddy
2015-05-22 13:24 ` [dpdk-dev] [PATCH 1/5] cxgbe: add hardware specific api for all supported Chelsio T5 series adapters Rahul Lakkireddy
2015-05-22 13:24 ` [dpdk-dev] [PATCH 2/5] cxgbe: add cxgbe poll mode driver Rahul Lakkireddy
2015-05-22 16:42 ` Stephen Hemminger
2015-05-23 5:57 ` Rahul Lakkireddy
2015-05-26 17:02 ` Rahul Lakkireddy
2015-05-26 17:24 ` Stephen Hemminger
2015-05-26 18:13 ` Rahul Lakkireddy
2015-05-22 16:43 ` Stephen Hemminger
2015-05-23 5:56 ` Rahul Lakkireddy
2015-05-22 16:46 ` Stephen Hemminger
2015-05-23 5:53 ` Rahul Lakkireddy
2015-05-27 5:49 ` Thomas Monjalon
2015-05-27 11:26 ` Rahul Lakkireddy
2015-05-22 13:24 ` [dpdk-dev] [PATCH 3/5] doc: add cxgbe PMD documentation under doc/guides/nics/cxgbe.rst Rahul Lakkireddy
2015-05-27 5:38 ` Thomas Monjalon
2015-05-27 11:24 ` Rahul Lakkireddy
2015-05-22 13:24 ` Rahul Lakkireddy [this message]
2015-05-22 13:24 ` [dpdk-dev] [PATCH 5/5] maintainers: claim responsibility for cxgbe PMD Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 00/11] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 01/11] cxgbe: add hardware specific api for all supported Chelsio T5 series adapters Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 02/11] cxgbe: add cxgbe poll mode driver Rahul Lakkireddy
2015-06-17 12:30 ` Thomas Monjalon
2015-06-18 7:06 ` Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 03/11] cxgbe: add device configuration and RX support for cxgbe PMD Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 04/11] cxgbe: add TX " Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 05/11] cxgbe: add device related operations " Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 06/11] cxgbe: add port statistics " Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 07/11] cxgbe: add link related functions " Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 08/11] cxgbe: add flow control " Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 09/11] doc: add cxgbe PMD documentation under doc/guides/nics/cxgbe.rst Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 10/11] config: enable cxgbe PMD for compilation and linking Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 11/11] maintainers: claim responsibility for cxgbe PMD Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 0/9] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 1/9] cxgbe: add hardware specific api for all supported Chelsio T5 series adapters Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 2/9] cxgbe: add cxgbe poll mode driver Rahul Lakkireddy
2015-06-28 19:32 ` Thomas Monjalon
2015-06-29 23:23 ` Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 3/9] cxgbe: add device configuration and RX support for cxgbe PMD Rahul Lakkireddy
2015-06-28 19:34 ` Thomas Monjalon
2015-06-29 23:18 ` Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 4/9] cxgbe: add TX " Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 5/9] cxgbe: add device related operations " Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 6/9] cxgbe: add port statistics " Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 7/9] cxgbe: add link related functions " Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 8/9] cxgbe: add flow control " Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 9/9] doc: add cxgbe PMD documentation under doc/guides/nics/cxgbe.rst Rahul Lakkireddy
2015-06-18 13:47 ` Mcnamara, John
2015-06-18 13:44 ` [dpdk-dev] [PATCH v3 0/9] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Mcnamara, John
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 " Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 1/9] cxgbe: add hardware specific api for all supported Chelsio T5 series adapters Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 2/9] cxgbe: add cxgbe poll mode driver Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 3/9] cxgbe: add device configuration and RX support for cxgbe PMD Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 4/9] cxgbe: add TX " Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 5/9] cxgbe: add device related operations " Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 6/9] cxgbe: add port statistics " Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 7/9] cxgbe: add link related functions " Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 8/9] cxgbe: add flow control " Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 9/9] doc: add cxgbe PMD documentation under doc/guides/nics/cxgbe.rst Rahul Lakkireddy
2015-06-30 21:01 ` [dpdk-dev] [PATCH v4 0/9] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Thomas Monjalon
2015-07-01 6:35 ` Rahul Lakkireddy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a62f238e4522f61c6dc03a8f0650a934cf62e06c.1432300701.git.rahul.lakkireddy@chelsio.com \
--to=rahul.lakkireddy@chelsio.com \
--cc=dev@dpdk.org \
--cc=felix@chelsio.com \
--cc=kumaras@chelsio.com \
--cc=nirranjan@chelsio.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).