DPDK patches and discussions
 help / color / mirror / Atom feed
From: Laurent Hardy <laurent.hardy@6wind.com>
To: "Zhang, Qi Z" <qi.z.zhang@intel.com>,
	Zijie Pan <zijie.pan@6wind.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Xing, Beilei" <beilei.xing@intel.com>
Subject: Re: [dpdk-dev] [PATCH] net/i40e: add a specific API to control the LLDP agent
Date: Tue, 22 May 2018 11:47:53 +0200	[thread overview]
Message-ID: <a87889a0-7223-c9bc-5d45-a653a3aa7762@6wind.com> (raw)
In-Reply-To: <039ED4275CED7440929022BC67E70611531B55D5@SHSMSX103.ccr.corp.intel.com>

Hi Qi,


On 05/21/2018 03:11 PM, Zhang, Qi Z wrote:
> Hi Zijie:
>
>> -----Original Message-----
>> From: Zijie Pan [mailto:zijie.pan@6wind.com]
>> Sent: Friday, May 18, 2018 6:14 PM
>> To: dev@dpdk.org
>> Cc: Xing, Beilei <beilei.xing@intel.com>; Zhang, Qi Z <qi.z.zhang@intel.com>;
>> Laurent Hardy <laurent.hardy@6wind.com>
>> Subject: [PATCH] net/i40e: add a specific API to control the LLDP agent
>>
>> Add a new API rte_pmd_i40e_set_lldp_cmd to control LLDP agent for i40e.
>> It supports the following i40e debug lldp commands:
> I'm not very sure if it is necessary to expose more APIs just for debug?
> As you know we have the patch Fixes: 4861cde46116 ("i40e: new poll mode driver") for the knowing issue.
> Now, if new firmware fix this, we properly can add LLDP disable back with properly firmware check branch (of cause with enough test first)
There is actually a real need (from customers) to have some control on 
the LLDP agent.
In kernel driver, this feature exists as it is currently possible to 
control the LLDP agent through a sysfs entry 
(/sys/kernel/debug/i40e/[INTERFACE]/cmd).
The purpose of this debug API is to provide same level of support via dpdk.

best regards,
Laurent
> Regards
> Qi
>
>
>>      - start/stop of the LLDP agent.
>>      - get local/remote of the LLDP MIB (Management Information Base).
>>
>> Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
>> Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
>> ---
>>   drivers/net/i40e/i40e_ethdev.h            |   19 +++++++++
>>   drivers/net/i40e/rte_pmd_i40e.c           |   64
>> +++++++++++++++++++++++++++++
>>   drivers/net/i40e/rte_pmd_i40e.h           |   22 ++++++++++
>>   drivers/net/i40e/rte_pmd_i40e_version.map |    8 +++-
>>   4 files changed, 112 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
>> index 55c8875..459b3ff 100644
>> --- a/drivers/net/i40e/i40e_ethdev.h
>> +++ b/drivers/net/i40e/i40e_ethdev.h
>> @@ -267,6 +267,25 @@ enum i40e_flxpld_layer_idx {  struct i40e_adapter;
>>
>>   /**
>> + * LLDP command type
>> + */
>> +enum i40_lldp_cmd_type {
>> +	I40E_LLDP_CMD_START = 0,
>> +	I40E_LLDP_CMD_STOP,
>> +	I40E_LLDP_CMD_GET_LOCAL,
>> +	I40E_LLDP_CMD_GET_REMOTE,
>> +	I40E_LLDP_CMD_UNKNOWN,
>> +};
>> +
>> +/**
>> + * LLDP command structure
>> + */
>> +struct i40e_lldp_cmd {
>> +	const char *name;
>> +	enum i40_lldp_cmd_type cmd;
>> +};
>> +
>> +/**
>>    * MAC filter structure
>>    */
>>   struct i40e_mac_filter_info {
>> diff --git a/drivers/net/i40e/rte_pmd_i40e.c
>> b/drivers/net/i40e/rte_pmd_i40e.c index 7aa1a75..307c597 100644
>> --- a/drivers/net/i40e/rte_pmd_i40e.c
>> +++ b/drivers/net/i40e/rte_pmd_i40e.c
>> @@ -12,6 +12,14 @@
>>   #include "i40e_rxtx.h"
>>   #include "rte_pmd_i40e.h"
>>
>> +static const struct i40e_lldp_cmd lldp_cmds_table[] = {
>> +	{"start", I40E_LLDP_CMD_START},
>> +	{"stop", I40E_LLDP_CMD_STOP},
>> +	{"get local", I40E_LLDP_CMD_GET_LOCAL},
>> +	{"get remote", I40E_LLDP_CMD_GET_REMOTE},
>> +	{"", I40E_LLDP_CMD_UNKNOWN},
>> +};
>> +
>>   int
>>   rte_pmd_i40e_ping_vfs(uint16_t port, uint16_t vf)  { @@ -3192,3 +3200,59
>> @@ int rte_pmd_i40e_flow_add_del_packet_template(
>>   	I40E_WRITE_FLUSH(hw);
>>   	return 0;
>>   }
>> +
>> +int __rte_experimental
>> +rte_pmd_i40e_set_lldp_cmd(uint16_t port, const char *cmd, void
>> +*lldpmib) {
>> +	struct rte_eth_dev *dev;
>> +	struct i40e_hw *hw;
>> +	uint8_t br_type;
>> +	int i, ret;
>> +
>> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
>> +
>> +	dev = &rte_eth_devices[port];
>> +
>> +	if (!is_i40e_supported(dev))
>> +		return -ENOTSUP;
>> +
>> +	hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
>> +
>> +	for (i = 0; i < I40E_LLDP_CMD_UNKNOWN; i++) {
>> +		if (!strcmp(cmd, lldp_cmds_table[i].name))
>> +			break;
>> +	}
>> +
>> +	if (lldp_cmds_table[i].cmd == I40E_LLDP_CMD_UNKNOWN) {
>> +		PMD_DRV_LOG(ERR, "Unknown LLDP command\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	switch (lldp_cmds_table[i].cmd) {
>> +	case I40E_LLDP_CMD_START:
>> +		ret = i40e_aq_start_lldp(hw, NULL);
>> +		break;
>> +	case I40E_LLDP_CMD_STOP:
>> +		ret = i40e_aq_stop_lldp(hw, true, NULL);
>> +		break;
>> +	case I40E_LLDP_CMD_GET_LOCAL:
>> +		ret = i40e_aq_get_lldp_mib(hw, 0,
>> +					   I40E_AQ_LLDP_MIB_LOCAL,
>> +					   lldpmib, I40E_LLDPDU_SIZE,
>> +					   NULL, NULL, NULL);
>> +		break;
>> +	case I40E_LLDP_CMD_GET_REMOTE:
>> +		br_type = I40E_AQ_LLDP_BRIDGE_TYPE_NEAREST_BRIDGE;
>> +		ret = i40e_aq_get_lldp_mib(hw, br_type,
>> +					   I40E_AQ_LLDP_MIB_REMOTE,
>> +					   lldpmib, I40E_LLDPDU_SIZE,
>> +					   NULL, NULL, NULL);
>> +		break;
>> +	default:
>> +		PMD_DRV_LOG(ERR, "Unknown LLDP command\n");
>> +		ret = -EINVAL;
>> +		break;
>> +	}
>> +
>> +	return ret;
>> +}
>> diff --git a/drivers/net/i40e/rte_pmd_i40e.h
>> b/drivers/net/i40e/rte_pmd_i40e.h index be4a602..59b2eee 100644
>> --- a/drivers/net/i40e/rte_pmd_i40e.h
>> +++ b/drivers/net/i40e/rte_pmd_i40e.h
>> @@ -1061,4 +1061,26 @@ int rte_pmd_i40e_inset_set(uint16_t port, uint8_t
>> pctype,
>>   	return 0;
>>   }
>>
>> +/**
>> + * @warning
>> + * @b EXPERIMENTAL: this API may change without prior notice.
>> + *
>> + * Process the LLDP commands, including "lldp start", "lldp stop",
>> + * "lldp get local" and "lldp get remote".
>> + *
>> + * @param port
>> + *    The port identifier of the Ethernet device.
>> + * @param cmd
>> + *    The LLDP command.
>> + * @param lldpmib
>> + *    The pointer to return the LLDP MIB.
>> + * @return
>> + *   - (0) if successful.
>> + *   - (-ENODEV) if *port* invalid.
>> + *   - (-EINVAL) if *cmd* invalid.
>> + *   - (-ENOTSUP) not supported by firmware.
>> + */
>> +int __rte_experimental
>> +rte_pmd_i40e_set_lldp_cmd(uint16_t port, const char *cmd, void
>> +*lldpmib);
>> +
>>   #endif /* _PMD_I40E_H_ */
>> diff --git a/drivers/net/i40e/rte_pmd_i40e_version.map
>> b/drivers/net/i40e/rte_pmd_i40e_version.map
>> index cccd576..1ffa02a 100644
>> --- a/drivers/net/i40e/rte_pmd_i40e_version.map
>> +++ b/drivers/net/i40e/rte_pmd_i40e_version.map
>> @@ -64,4 +64,10 @@ DPDK_18.02 {
>>
>>   	rte_pmd_i40e_inset_get;
>>   	rte_pmd_i40e_inset_set;
>> -} DPDK_17.11;
>> \ No newline at end of file
>> +} DPDK_17.11;
>> +
>> +EXPERIMENTAL {
>> +	global:
>> +
>> +	rte_pmd_i40e_set_lldp_cmd;
>> +};
>> --
>> 1.7.10.4

  reply	other threads:[~2018-05-22  9:48 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-18 10:14 Zijie Pan
2018-05-18 10:27 ` Thomas Monjalon
2018-05-21  3:35   ` Zijie Pan
2018-05-21  8:39     ` Thomas Monjalon
2018-05-21  8:58       ` Laurent Hardy
2018-05-21 10:10         ` Thomas Monjalon
2018-05-21 13:11 ` Zhang, Qi Z
2018-05-22  9:47   ` Laurent Hardy [this message]
2018-05-22 13:00 ` Zhang, Qi Z
2018-05-24  1:32 ` [dpdk-dev] [PATCH v2] " Zijie Pan
2018-05-29  5:54   ` Zhang, Helin
2018-06-14 15:58   ` Ferruh Yigit
2018-05-24  1:45 [dpdk-dev] [PATCH] " Zijie Pan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a87889a0-7223-c9bc-5d45-a653a3aa7762@6wind.com \
    --to=laurent.hardy@6wind.com \
    --cc=beilei.xing@intel.com \
    --cc=dev@dpdk.org \
    --cc=qi.z.zhang@intel.com \
    --cc=zijie.pan@6wind.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).