* [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names
@ 2019-03-06 16:22 Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 1/6] eal/bsdapp: rename to freebsd Bruce Richardson
` (7 more replies)
0 siblings, 8 replies; 17+ messages in thread
From: Bruce Richardson @ 2019-03-06 16:22 UTC (permalink / raw)
To: dev; +Cc: Bruce Richardson
The terms linuxapp and bsdapp are legacy names in DPDK that are equivalent
to the more usual names of "linux" and "freebsd". Therefore, we can
replace the instances of the "app" names with the more usual variants. The
only issue in maintaining backward compatibility which can be done by
preserving a) the build config filenames and b) the macros defined for
the build. In both cases, new configs/macros are added while keeping the
old for compatiblity.
The first 5 patches are relatively minor, internal changes, or changes for
the newer meson system. Patch 6 is larger in size as it changes the
make build system which has far greater use of the names linuxapp and
bsdapp.
Bruce Richardson (6):
eal/bsdapp: rename to freebsd
eal/linuxapp: rename to linux
build/linux: rename macro from LINUXAPP to LINUX
build/freebsd: rename macro from BSDPAPP to FREEBSD
build/meson: change linuxapp to linux in meson cross files
build: allow linux and freebsd in build configs
MAINTAINERS | 16 +--
app/test-bbdev/test-bbdev.py | 2 +-
app/test-bbdev/test_bbdev_vector.c | 2 +-
.../cperf_test_vector_parsing.c | 2 +-
app/test-pmd/testpmd.c | 2 +-
app/test/autotest.py | 2 +-
app/test/process.h | 4 +-
app/test/test.c | 2 +-
app/test/test_alarm.c | 2 +-
app/test/test_eal_flags.c | 34 +++---
app/test/test_eal_fs.c | 2 +-
app/test/test_errno.c | 2 +-
app/test/test_interrupts.c | 4 +-
app/test/test_kni.c | 2 +-
app/test/test_mempool.c | 2 +-
app/test/test_mp_secondary.c | 6 +-
app/test/test_pdump.c | 2 +-
app/test/test_timer_perf.c | 2 +-
app/test/test_timer_racecond.c | 2 +-
...mv8_linuxapp_gcc => arm64_armv8_linux_gcc} | 0
...aa2_linuxapp_gcc => arm64_dpaa2_linux_gcc} | 0
...dpaa_linuxapp_gcc => arm64_dpaa_linux_gcc} | 0
..._linuxapp_gcc => arm64_thunderx_linux_gcc} | 0
...on_armv8a_linuxapp => common_armv8a_linux} | 2 +-
config/{common_bsdapp => common_freebsd} | 2 +-
config/{common_linuxapp => common_linux} | 1 +
config/defconfig_arm-armv7a-linux-gcc | 1 +
config/defconfig_arm-armv7a-linuxapp-gcc | 2 +-
config/defconfig_arm64-armv8a-linux-clang | 1 +
config/defconfig_arm64-armv8a-linux-gcc | 1 +
config/defconfig_arm64-armv8a-linuxapp-clang | 2 +-
config/defconfig_arm64-armv8a-linuxapp-gcc | 2 +-
config/defconfig_arm64-bluefield-linux-gcc | 1 +
config/defconfig_arm64-bluefield-linuxapp-gcc | 2 +-
config/defconfig_arm64-dpaa-linux-gcc | 1 +
config/defconfig_arm64-dpaa-linuxapp-gcc | 2 +-
config/defconfig_arm64-dpaa2-linux-gcc | 1 +
config/defconfig_arm64-dpaa2-linuxapp-gcc | 2 +-
config/defconfig_arm64-stingray-linux-gcc | 1 +
config/defconfig_arm64-stingray-linuxapp-gcc | 2 +-
config/defconfig_arm64-thunderx-linux-gcc | 1 +
config/defconfig_arm64-thunderx-linuxapp-gcc | 2 +-
config/defconfig_arm64-xgene1-linux-gcc | 1 +
config/defconfig_arm64-xgene1-linuxapp-gcc | 2 +-
config/defconfig_i686-native-linux-gcc | 1 +
config/defconfig_i686-native-linux-icc | 1 +
config/defconfig_i686-native-linuxapp-gcc | 2 +-
config/defconfig_i686-native-linuxapp-icc | 2 +-
config/defconfig_ppc_64-power8-linux-gcc | 1 +
config/defconfig_ppc_64-power8-linuxapp-gcc | 2 +-
config/defconfig_x86_64-native-bsdapp-clang | 2 +-
config/defconfig_x86_64-native-bsdapp-gcc | 2 +-
config/defconfig_x86_64-native-freebsd-clang | 1 +
config/defconfig_x86_64-native-freebsd-gcc | 1 +
config/defconfig_x86_64-native-linux-clang | 1 +
config/defconfig_x86_64-native-linux-gcc | 1 +
config/defconfig_x86_64-native-linux-icc | 1 +
config/defconfig_x86_64-native-linuxapp-clang | 2 +-
config/defconfig_x86_64-native-linuxapp-gcc | 2 +-
config/defconfig_x86_64-native-linuxapp-icc | 2 +-
config/defconfig_x86_x32-native-linux-gcc | 1 +
config/defconfig_x86_x32-native-linuxapp-gcc | 2 +-
config/rte_config.h | 8 ++
devtools/build-tags.sh | 12 +--
devtools/test-build.sh | 2 +-
devtools/test-meson-builds.sh | 2 +-
devtools/validate-abi.sh | 2 +-
doc/build-sdk-meson.txt | 4 +-
doc/build-sdk-quick.txt | 2 +-
doc/guides/compressdevs/octeontx.rst | 4 +-
doc/guides/contributing/design.rst | 8 +-
doc/guides/contributing/patches.rst | 14 +--
doc/guides/contributing/versioning.rst | 6 +-
doc/guides/cryptodevs/armv8.rst | 2 +-
doc/guides/cryptodevs/caam_jr.rst | 6 +-
doc/guides/cryptodevs/dpaa2_sec.rst | 2 +-
doc/guides/cryptodevs/dpaa_sec.rst | 2 +-
doc/guides/cryptodevs/openssl.rst | 2 +-
doc/guides/cryptodevs/virtio.rst | 8 +-
doc/guides/cryptodevs/zuc.rst | 2 +-
doc/guides/eventdevs/dpaa.rst | 2 +-
doc/guides/eventdevs/dpaa2.rst | 2 +-
doc/guides/eventdevs/octeontx.rst | 2 +-
doc/guides/freebsd_gsg/build_dpdk.rst | 6 +-
doc/guides/freebsd_gsg/build_sample_apps.rst | 10 +-
doc/guides/freebsd_gsg/install_from_ports.rst | 4 +-
doc/guides/freebsd_gsg/intro.rst | 4 +-
doc/guides/howto/lm_bond_virtio_sriov.rst | 4 +-
doc/guides/howto/lm_virtio_vhost_user.rst | 4 +-
doc/guides/howto/pvp_reference_benchmark.rst | 4 +-
.../virtio_user_for_container_networking.rst | 4 +-
doc/guides/linux_gsg/build_dpdk.rst | 10 +-
doc/guides/linux_gsg/build_sample_apps.rst | 6 +-
.../linux_gsg/cross_build_dpdk_for_arm64.rst | 6 +-
doc/guides/linux_gsg/intro.rst | 4 +-
.../linux_gsg/nic_perf_intel_platform.rst | 2 +-
doc/guides/linux_gsg/quick_start.rst | 26 ++---
doc/guides/mempool/octeontx.rst | 2 +-
doc/guides/nics/build_and_test.rst | 34 +++---
doc/guides/nics/cxgbe.rst | 6 +-
doc/guides/nics/dpaa.rst | 2 +-
doc/guides/nics/enic.rst | 2 +-
doc/guides/nics/intel_vf.rst | 10 +-
doc/guides/nics/mlx5.rst | 2 +-
doc/guides/nics/mvneta.rst | 2 +-
doc/guides/nics/mvpp2.rst | 4 +-
doc/guides/nics/nfp.rst | 2 +-
doc/guides/nics/octeontx.rst | 4 +-
doc/guides/nics/softnic.rst | 4 +-
doc/guides/nics/tap.rst | 2 +-
doc/guides/nics/thunderx.rst | 4 +-
doc/guides/platform/octeontx.rst | 6 +-
doc/guides/prog_guide/build_app.rst | 4 +-
.../prog_guide/dev_kit_build_system.rst | 8 +-
.../prog_guide/dev_kit_root_make_help.rst | 6 +-
.../prog_guide/env_abstraction_layer.rst | 10 +-
.../prog_guide/ext_app_lib_make_help.rst | 4 +-
doc/guides/prog_guide/extend_dpdk.rst | 4 +-
doc/guides/prog_guide/glossary.rst | 2 +-
doc/guides/prog_guide/img/linuxapp_launch.svg | 4 +-
doc/guides/prog_guide/intro.rst | 2 +-
doc/guides/prog_guide/overview.rst | 2 +-
doc/guides/prog_guide/profile_app.rst | 2 +-
doc/guides/prog_guide/qos_framework.rst | 2 +-
doc/guides/rawdevs/dpaa2_cmdif.rst | 2 +-
doc/guides/rawdevs/dpaa2_qdma.rst | 2 +-
doc/guides/rel_notes/release_19_02.rst | 2 +-
doc/guides/rel_notes/release_2_1.rst | 2 +-
doc/guides/sample_app_ug/bbdev_app.rst | 6 +-
doc/guides/sample_app_ug/cmd_line.rst | 2 +-
doc/guides/sample_app_ug/dist_app.rst | 2 +-
doc/guides/sample_app_ug/fips_validation.rst | 4 +-
doc/guides/sample_app_ug/flow_classify.rst | 2 +-
doc/guides/sample_app_ug/flow_filtering.rst | 4 +-
doc/guides/sample_app_ug/hello_world.rst | 4 +-
doc/guides/sample_app_ug/ip_frag.rst | 4 +-
doc/guides/sample_app_ug/ip_reassembly.rst | 4 +-
doc/guides/sample_app_ug/keep_alive.rst | 2 +-
.../sample_app_ug/kernel_nic_interface.rst | 2 +-
doc/guides/sample_app_ug/l2_forward_cat.rst | 2 +-
.../sample_app_ug/l2_forward_crypto.rst | 2 +-
.../sample_app_ug/l2_forward_job_stats.rst | 2 +-
.../sample_app_ug/l2_forward_real_virtual.rst | 2 +-
doc/guides/sample_app_ug/link_status_intr.rst | 2 +-
.../sample_app_ug/netmap_compatibility.rst | 2 +-
.../sample_app_ug/performance_thread.rst | 2 +-
doc/guides/sample_app_ug/ptpclient.rst | 4 +-
doc/guides/sample_app_ug/qos_scheduler.rst | 2 +-
doc/guides/sample_app_ug/quota_watermark.rst | 4 +-
doc/guides/sample_app_ug/rxtx_callbacks.rst | 2 +-
doc/guides/sample_app_ug/service_cores.rst | 2 +-
doc/guides/sample_app_ug/skeleton.rst | 2 +-
doc/guides/sample_app_ug/tep_termination.rst | 2 +-
doc/guides/sample_app_ug/timer.rst | 2 +-
.../sample_app_ug/vmdq_dcb_forwarding.rst | 4 +-
doc/guides/testpmd_app_ug/build_app.rst | 2 +-
doc/guides/tools/testbbdev.rst | 8 +-
drivers/bus/dpaa/Makefile | 2 +-
drivers/bus/pci/Makefile | 4 +-
drivers/bus/vmbus/Makefile | 4 +-
drivers/crypto/caam_jr/Makefile | 2 +-
drivers/crypto/dpaa2_sec/Makefile | 2 +-
drivers/crypto/dpaa_sec/Makefile | 2 +-
drivers/crypto/virtio/virtio_pci.c | 2 +-
drivers/event/dpaa/Makefile | 2 +-
drivers/event/dpaa2/Makefile | 2 +-
drivers/mempool/dpaa2/Makefile | 2 +-
drivers/net/ark/Makefile | 2 +-
drivers/net/dpaa/Makefile | 2 +-
drivers/net/dpaa2/Makefile | 2 +-
drivers/net/failsafe/Makefile | 2 +-
drivers/net/failsafe/failsafe_private.h | 2 +-
drivers/net/pcap/rte_eth_pcap.c | 6 +-
drivers/net/sfc/sfc_intr.c | 2 +-
drivers/net/softnic/Makefile | 2 +-
drivers/net/softnic/rte_eth_softnic_tap.c | 4 +-
drivers/net/virtio/virtio_pci.c | 2 +-
drivers/raw/dpaa2_qdma/Makefile | 2 +-
examples/Makefile | 2 +-
examples/bbdev_app/Makefile | 2 +-
examples/bond/Makefile | 2 +-
examples/cmdline/Makefile | 2 +-
examples/distributor/Makefile | 2 +-
examples/ethtool/Makefile | 6 +-
examples/ethtool/ethtool-app/Makefile | 2 +-
examples/ethtool/lib/Makefile | 6 +-
examples/eventdev_pipeline/Makefile | 2 +-
examples/exception_path/Makefile | 2 +-
examples/exception_path/main.c | 4 +-
examples/fips_validation/Makefile | 2 +-
examples/flow_classify/Makefile | 2 +-
examples/flow_filtering/Makefile | 2 +-
examples/helloworld/Makefile | 2 +-
examples/ip_fragmentation/Makefile | 2 +-
examples/ip_pipeline/Makefile | 6 +-
examples/ip_pipeline/tap.c | 4 +-
examples/ip_reassembly/Makefile | 2 +-
examples/ipsec-secgw/Makefile | 2 +-
examples/ipsec-secgw/test/common_defs.sh | 2 +-
examples/ipv4_multicast/Makefile | 2 +-
examples/kni/Makefile | 6 +-
examples/l2fwd-cat/Makefile | 2 +-
examples/l2fwd-crypto/Makefile | 2 +-
examples/l2fwd-jobstats/Makefile | 2 +-
examples/l2fwd-keepalive/Makefile | 2 +-
examples/l2fwd-keepalive/ka-agent/Makefile | 2 +-
examples/l2fwd/Makefile | 2 +-
examples/l3fwd-acl/Makefile | 2 +-
examples/l3fwd-power/Makefile | 6 +-
examples/l3fwd-vf/Makefile | 2 +-
examples/l3fwd/Makefile | 2 +-
examples/link_status_interrupt/Makefile | 2 +-
examples/load_balancer/Makefile | 2 +-
examples/multi_process/Makefile | 10 +-
.../multi_process/client_server_mp/Makefile | 6 +-
.../client_server_mp/mp_server/Makefile | 6 +-
examples/multi_process/hotplug_mp/Makefile | 2 +-
examples/multi_process/simple_mp/Makefile | 2 +-
examples/multi_process/symmetric_mp/Makefile | 2 +-
examples/netmap_compat/Makefile | 2 +-
examples/netmap_compat/bridge/Makefile | 6 +-
examples/packet_ordering/Makefile | 2 +-
examples/performance-thread/Makefile | 2 +-
.../performance-thread/l3fwd-thread/Makefile | 2 +-
.../performance-thread/pthread_shim/Makefile | 2 +-
.../pthread_shim/pthread_shim.c | 2 +-
examples/ptpclient/Makefile | 2 +-
examples/qos_meter/Makefile | 2 +-
examples/qos_sched/Makefile | 6 +-
examples/quota_watermark/Makefile | 6 +-
examples/quota_watermark/qw/Makefile | 2 +-
examples/quota_watermark/qwctl/Makefile | 2 +-
examples/rxtx_callbacks/Makefile | 2 +-
examples/server_node_efd/Makefile | 6 +-
examples/server_node_efd/server/Makefile | 6 +-
examples/service_cores/Makefile | 2 +-
examples/skeleton/Makefile | 2 +-
examples/tep_termination/Makefile | 6 +-
examples/timer/Makefile | 2 +-
examples/vdpa/Makefile | 4 +-
examples/vhost/Makefile | 6 +-
examples/vhost_crypto/Makefile | 6 +-
examples/vhost_scsi/Makefile | 6 +-
examples/vm_power_manager/Makefile | 2 +-
examples/vm_power_manager/guest_cli/Makefile | 2 +-
examples/vmdq/Makefile | 2 +-
examples/vmdq_dcb/Makefile | 2 +-
kernel/Makefile | 4 +-
kernel/freebsd/Makefile | 4 +-
kernel/linux/kni/meson.build | 2 +-
lib/Makefile | 2 +-
lib/librte_eal/Makefile | 8 +-
lib/librte_eal/bsdapp/eal/Makefile | 94 ----------------
lib/librte_eal/common/arch/x86/rte_cycles.c | 2 +-
lib/librte_eal/common/eal_common_errno.c | 2 +-
.../common/include/generic/rte_byteorder.h | 2 +-
lib/librte_eal/common/include/rte_debug.h | 2 +-
lib/librte_eal/common/include/rte_eal.h | 2 +-
.../common/include/rte_string_fns.h | 4 +-
.../{bsdapp => freebsd}/BSDmakefile.meson | 0
lib/librte_eal/{bsdapp => freebsd}/Makefile | 2 +-
lib/librte_eal/freebsd/eal/Makefile | 94 ++++++++++++++++
lib/librte_eal/{bsdapp => freebsd}/eal/eal.c | 0
.../{bsdapp => freebsd}/eal/eal_alarm.c | 0
.../eal/eal_alarm_private.h | 0
.../{bsdapp => freebsd}/eal/eal_cpuflags.c | 0
.../{bsdapp => freebsd}/eal/eal_debug.c | 0
.../{bsdapp => freebsd}/eal/eal_dev.c | 0
.../eal/eal_hugepage_info.c | 0
.../{bsdapp => freebsd}/eal/eal_interrupts.c | 0
.../{bsdapp => freebsd}/eal/eal_lcore.c | 0
.../{bsdapp => freebsd}/eal/eal_memalloc.c | 0
.../{bsdapp => freebsd}/eal/eal_memory.c | 0
.../{bsdapp => freebsd}/eal/eal_thread.c | 0
.../{bsdapp => freebsd}/eal/eal_timer.c | 0
.../{bsdapp => freebsd}/eal/meson.build | 0
lib/librte_eal/{linuxapp => linux}/Makefile | 2 +-
lib/librte_eal/linux/eal/Makefile | 101 ++++++++++++++++++
lib/librte_eal/{linuxapp => linux}/eal/eal.c | 0
.../{linuxapp => linux}/eal/eal_alarm.c | 0
.../{linuxapp => linux}/eal/eal_cpuflags.c | 0
.../{linuxapp => linux}/eal/eal_debug.c | 0
.../{linuxapp => linux}/eal/eal_dev.c | 0
.../eal/eal_hugepage_info.c | 0
.../{linuxapp => linux}/eal/eal_interrupts.c | 0
.../{linuxapp => linux}/eal/eal_lcore.c | 0
.../{linuxapp => linux}/eal/eal_log.c | 0
.../{linuxapp => linux}/eal/eal_memalloc.c | 0
.../{linuxapp => linux}/eal/eal_memory.c | 0
.../{linuxapp => linux}/eal/eal_thread.c | 0
.../{linuxapp => linux}/eal/eal_timer.c | 0
.../{linuxapp => linux}/eal/eal_vfio.c | 0
.../{linuxapp => linux}/eal/eal_vfio.h | 0
.../eal/eal_vfio_mp_sync.c | 0
.../eal/include/exec-env/rte_kni_common.h | 0
.../{linuxapp => linux}/eal/meson.build | 0
lib/librte_eal/linuxapp/eal/Makefile | 101 ------------------
lib/librte_eal/meson.build | 8 +-
lib/librte_eventdev/Makefile | 2 +-
lib/librte_kni/rte_kni.c | 2 +-
mk/exec-env/bsdapp | 1 +
mk/exec-env/{bsdapp => freebsd}/rte.app.mk | 0
mk/exec-env/{bsdapp => freebsd}/rte.vars.mk | 2 +-
mk/exec-env/{linuxapp => linux}/rte.app.mk | 0
mk/exec-env/{linuxapp => linux}/rte.vars.mk | 2 +-
mk/exec-env/linuxapp | 1 +
mk/rte.app.mk | 4 +-
mk/rte.sdkconfig.mk | 9 +-
mk/rte.sdkinstall.mk | 3 +
mk/rte.sdkroot.mk | 2 +-
usertools/dpdk-setup.sh | 4 +-
311 files changed, 668 insertions(+), 635 deletions(-)
rename config/arm/{arm64_armv8_linuxapp_gcc => arm64_armv8_linux_gcc} (100%)
rename config/arm/{arm64_dpaa2_linuxapp_gcc => arm64_dpaa2_linux_gcc} (100%)
rename config/arm/{arm64_dpaa_linuxapp_gcc => arm64_dpaa_linux_gcc} (100%)
rename config/arm/{arm64_thunderx_linuxapp_gcc => arm64_thunderx_linux_gcc} (100%)
rename config/{common_armv8a_linuxapp => common_armv8a_linux} (97%)
rename config/{common_bsdapp => common_freebsd} (91%)
rename config/{common_linuxapp => common_linux} (98%)
create mode 120000 config/defconfig_arm-armv7a-linux-gcc
create mode 120000 config/defconfig_arm64-armv8a-linux-clang
create mode 120000 config/defconfig_arm64-armv8a-linux-gcc
create mode 120000 config/defconfig_arm64-bluefield-linux-gcc
create mode 120000 config/defconfig_arm64-dpaa-linux-gcc
create mode 120000 config/defconfig_arm64-dpaa2-linux-gcc
create mode 120000 config/defconfig_arm64-stingray-linux-gcc
create mode 120000 config/defconfig_arm64-thunderx-linux-gcc
create mode 120000 config/defconfig_arm64-xgene1-linux-gcc
create mode 120000 config/defconfig_i686-native-linux-gcc
create mode 120000 config/defconfig_i686-native-linux-icc
create mode 120000 config/defconfig_ppc_64-power8-linux-gcc
create mode 120000 config/defconfig_x86_64-native-freebsd-clang
create mode 120000 config/defconfig_x86_64-native-freebsd-gcc
create mode 120000 config/defconfig_x86_64-native-linux-clang
create mode 120000 config/defconfig_x86_64-native-linux-gcc
create mode 120000 config/defconfig_x86_64-native-linux-icc
create mode 120000 config/defconfig_x86_x32-native-linux-gcc
delete mode 100644 lib/librte_eal/bsdapp/eal/Makefile
rename lib/librte_eal/{bsdapp => freebsd}/BSDmakefile.meson (100%)
rename lib/librte_eal/{bsdapp => freebsd}/Makefile (78%)
create mode 100644 lib/librte_eal/freebsd/eal/Makefile
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_alarm.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_alarm_private.h (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_cpuflags.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_debug.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_dev.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_hugepage_info.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_interrupts.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_lcore.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_memalloc.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_memory.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_thread.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_timer.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/meson.build (100%)
rename lib/librte_eal/{linuxapp => linux}/Makefile (82%)
create mode 100644 lib/librte_eal/linux/eal/Makefile
rename lib/librte_eal/{linuxapp => linux}/eal/eal.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_alarm.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_cpuflags.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_debug.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_dev.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_hugepage_info.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_interrupts.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_lcore.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_log.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_memalloc.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_memory.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_thread.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_timer.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_vfio.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_vfio.h (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_vfio_mp_sync.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/include/exec-env/rte_kni_common.h (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/meson.build (100%)
delete mode 100644 lib/librte_eal/linuxapp/eal/Makefile
create mode 120000 mk/exec-env/bsdapp
rename mk/exec-env/{bsdapp => freebsd}/rte.app.mk (100%)
rename mk/exec-env/{bsdapp => freebsd}/rte.vars.mk (94%)
rename mk/exec-env/{linuxapp => linux}/rte.app.mk (100%)
rename mk/exec-env/{linuxapp => linux}/rte.vars.mk (95%)
create mode 120000 mk/exec-env/linuxapp
--
2.20.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [dpdk-dev] [PATCH 1/6] eal/bsdapp: rename to freebsd
2019-03-06 16:22 [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names Bruce Richardson
@ 2019-03-06 16:22 ` Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 2/6] eal/linuxapp: rename to linux Bruce Richardson
` (6 subsequent siblings)
7 siblings, 0 replies; 17+ messages in thread
From: Bruce Richardson @ 2019-03-06 16:22 UTC (permalink / raw)
To: dev; +Cc: Bruce Richardson
The term "bsdapp" is a legacy one, but just calling the subdirectory
"freebsd" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
MAINTAINERS | 8 ++++----
devtools/build-tags.sh | 2 +-
doc/guides/prog_guide/env_abstraction_layer.rst | 2 +-
lib/librte_eal/Makefile | 4 ++--
lib/librte_eal/{bsdapp => freebsd}/BSDmakefile.meson | 0
lib/librte_eal/{bsdapp => freebsd}/Makefile | 0
lib/librte_eal/{bsdapp => freebsd}/eal/Makefile | 0
lib/librte_eal/{bsdapp => freebsd}/eal/eal.c | 0
lib/librte_eal/{bsdapp => freebsd}/eal/eal_alarm.c | 0
.../{bsdapp => freebsd}/eal/eal_alarm_private.h | 0
lib/librte_eal/{bsdapp => freebsd}/eal/eal_cpuflags.c | 0
lib/librte_eal/{bsdapp => freebsd}/eal/eal_debug.c | 0
lib/librte_eal/{bsdapp => freebsd}/eal/eal_dev.c | 0
.../{bsdapp => freebsd}/eal/eal_hugepage_info.c | 0
lib/librte_eal/{bsdapp => freebsd}/eal/eal_interrupts.c | 0
lib/librte_eal/{bsdapp => freebsd}/eal/eal_lcore.c | 0
lib/librte_eal/{bsdapp => freebsd}/eal/eal_memalloc.c | 0
lib/librte_eal/{bsdapp => freebsd}/eal/eal_memory.c | 0
lib/librte_eal/{bsdapp => freebsd}/eal/eal_thread.c | 0
lib/librte_eal/{bsdapp => freebsd}/eal/eal_timer.c | 0
lib/librte_eal/{bsdapp => freebsd}/eal/meson.build | 0
lib/librte_eal/meson.build | 2 +-
22 files changed, 9 insertions(+), 9 deletions(-)
rename lib/librte_eal/{bsdapp => freebsd}/BSDmakefile.meson (100%)
rename lib/librte_eal/{bsdapp => freebsd}/Makefile (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/Makefile (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_alarm.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_alarm_private.h (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_cpuflags.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_debug.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_dev.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_hugepage_info.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_interrupts.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_lcore.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_memalloc.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_memory.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_thread.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/eal_timer.c (100%)
rename lib/librte_eal/{bsdapp => freebsd}/eal/meson.build (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index f96d87aba..631f6f62e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -113,7 +113,7 @@ F: doc/guides/prog_guide/ext_app_lib_make_help.rst
Meson build
M: Bruce Richardson <bruce.richardson@intel.com>
F: meson.build
-F: lib/librte_eal/bsdapp/BSDmakefile.meson
+F: lib/librte_eal/freebsd/BSDmakefile.meson
F: meson_options.txt
F: config/rte_config.h
F: buildtools/gen-pmdinfo-cfile.sh
@@ -174,7 +174,7 @@ F: lib/librte_eal/common/eal_common_fbarray.c
F: lib/librte_eal/common/eal_common_mem*
F: lib/librte_eal/common/eal_hugepages.h
F: lib/librte_eal/linuxapp/eal/eal_mem*
-F: lib/librte_eal/bsdapp/eal/eal_mem*
+F: lib/librte_eal/freebsd/eal/eal_mem*
F: doc/guides/prog_guide/env_abstraction_layer.rst
F: app/test/test_external_mem.c
F: app/test/test_func_reentrancy.c
@@ -260,8 +260,8 @@ F: drivers/bus/pci/linux/*vfio*
FreeBSD EAL (with overlaps)
M: Bruce Richardson <bruce.richardson@intel.com>
-F: lib/librte_eal/bsdapp/Makefile
-F: lib/librte_eal/bsdapp/eal/
+F: lib/librte_eal/freebsd/Makefile
+F: lib/librte_eal/freebsd/eal/
F: doc/guides/freebsd_gsg/
FreeBSD contigmem
diff --git a/devtools/build-tags.sh b/devtools/build-tags.sh
index 78001f048..caf9c5348 100755
--- a/devtools/build-tags.sh
+++ b/devtools/build-tags.sh
@@ -72,7 +72,7 @@ linux_sources()
bsd_sources()
{
- find_sources "lib/librte_eal/bsdapp" '*.[chS]'
+ find_sources "lib/librte_eal/freebsd" '*.[chS]'
}
arm_common()
diff --git a/doc/guides/prog_guide/env_abstraction_layer.rst b/doc/guides/prog_guide/env_abstraction_layer.rst
index 929d76dba..4f33c0c2d 100644
--- a/doc/guides/prog_guide/env_abstraction_layer.rst
+++ b/doc/guides/prog_guide/env_abstraction_layer.rst
@@ -349,7 +349,7 @@ EAL provides the event APIs for this event-driven thread mode.
Taking linuxapp as an example, the implementation relies on epoll. Each thread can monitor an epoll instance
in which all the wake-up events' file descriptors are added. The event file descriptors are created and mapped to
the interrupt vectors according to the UIO/VFIO spec.
-From bsdapp's perspective, kqueue is the alternative way, but not implemented yet.
+From FreeBSD's perspective, kqueue is the alternative way, but not implemented yet.
EAL initializes the mapping between event file descriptors and interrupt vectors, while each device initializes the mapping
between interrupt vectors and queues. In this way, EAL actually is unaware of the interrupt cause on the specific vector.
diff --git a/lib/librte_eal/Makefile b/lib/librte_eal/Makefile
index ccd45cb84..39d64bb7a 100644
--- a/lib/librte_eal/Makefile
+++ b/lib/librte_eal/Makefile
@@ -6,7 +6,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
DIRS-y += common
DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += linuxapp
DEPDIRS-linuxapp := common
-DIRS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += bsdapp
-DEPDIRS-bsdapp := common
+DIRS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += freebsd
+DEPDIRS-freebsd := common
include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/lib/librte_eal/bsdapp/BSDmakefile.meson b/lib/librte_eal/freebsd/BSDmakefile.meson
similarity index 100%
rename from lib/librte_eal/bsdapp/BSDmakefile.meson
rename to lib/librte_eal/freebsd/BSDmakefile.meson
diff --git a/lib/librte_eal/bsdapp/Makefile b/lib/librte_eal/freebsd/Makefile
similarity index 100%
rename from lib/librte_eal/bsdapp/Makefile
rename to lib/librte_eal/freebsd/Makefile
diff --git a/lib/librte_eal/bsdapp/eal/Makefile b/lib/librte_eal/freebsd/eal/Makefile
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/Makefile
rename to lib/librte_eal/freebsd/eal/Makefile
diff --git a/lib/librte_eal/bsdapp/eal/eal.c b/lib/librte_eal/freebsd/eal/eal.c
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/eal.c
rename to lib/librte_eal/freebsd/eal/eal.c
diff --git a/lib/librte_eal/bsdapp/eal/eal_alarm.c b/lib/librte_eal/freebsd/eal/eal_alarm.c
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/eal_alarm.c
rename to lib/librte_eal/freebsd/eal/eal_alarm.c
diff --git a/lib/librte_eal/bsdapp/eal/eal_alarm_private.h b/lib/librte_eal/freebsd/eal/eal_alarm_private.h
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/eal_alarm_private.h
rename to lib/librte_eal/freebsd/eal/eal_alarm_private.h
diff --git a/lib/librte_eal/bsdapp/eal/eal_cpuflags.c b/lib/librte_eal/freebsd/eal/eal_cpuflags.c
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/eal_cpuflags.c
rename to lib/librte_eal/freebsd/eal/eal_cpuflags.c
diff --git a/lib/librte_eal/bsdapp/eal/eal_debug.c b/lib/librte_eal/freebsd/eal/eal_debug.c
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/eal_debug.c
rename to lib/librte_eal/freebsd/eal/eal_debug.c
diff --git a/lib/librte_eal/bsdapp/eal/eal_dev.c b/lib/librte_eal/freebsd/eal/eal_dev.c
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/eal_dev.c
rename to lib/librte_eal/freebsd/eal/eal_dev.c
diff --git a/lib/librte_eal/bsdapp/eal/eal_hugepage_info.c b/lib/librte_eal/freebsd/eal/eal_hugepage_info.c
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/eal_hugepage_info.c
rename to lib/librte_eal/freebsd/eal/eal_hugepage_info.c
diff --git a/lib/librte_eal/bsdapp/eal/eal_interrupts.c b/lib/librte_eal/freebsd/eal/eal_interrupts.c
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/eal_interrupts.c
rename to lib/librte_eal/freebsd/eal/eal_interrupts.c
diff --git a/lib/librte_eal/bsdapp/eal/eal_lcore.c b/lib/librte_eal/freebsd/eal/eal_lcore.c
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/eal_lcore.c
rename to lib/librte_eal/freebsd/eal/eal_lcore.c
diff --git a/lib/librte_eal/bsdapp/eal/eal_memalloc.c b/lib/librte_eal/freebsd/eal/eal_memalloc.c
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/eal_memalloc.c
rename to lib/librte_eal/freebsd/eal/eal_memalloc.c
diff --git a/lib/librte_eal/bsdapp/eal/eal_memory.c b/lib/librte_eal/freebsd/eal/eal_memory.c
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/eal_memory.c
rename to lib/librte_eal/freebsd/eal/eal_memory.c
diff --git a/lib/librte_eal/bsdapp/eal/eal_thread.c b/lib/librte_eal/freebsd/eal/eal_thread.c
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/eal_thread.c
rename to lib/librte_eal/freebsd/eal/eal_thread.c
diff --git a/lib/librte_eal/bsdapp/eal/eal_timer.c b/lib/librte_eal/freebsd/eal/eal_timer.c
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/eal_timer.c
rename to lib/librte_eal/freebsd/eal/eal_timer.c
diff --git a/lib/librte_eal/bsdapp/eal/meson.build b/lib/librte_eal/freebsd/eal/meson.build
similarity index 100%
rename from lib/librte_eal/bsdapp/eal/meson.build
rename to lib/librte_eal/freebsd/eal/meson.build
diff --git a/lib/librte_eal/meson.build b/lib/librte_eal/meson.build
index 98c1d1f31..4ae0efccb 100644
--- a/lib/librte_eal/meson.build
+++ b/lib/librte_eal/meson.build
@@ -15,7 +15,7 @@ if host_machine.system() == 'linux'
elif host_machine.system() == 'freebsd'
dpdk_conf.set('RTE_EXEC_ENV_BSDAPP', 1)
- subdir('bsdapp/eal')
+ subdir('freebsd/eal')
else
error('unsupported system type "@0@"'.format(host_machine.system()))
--
2.20.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [dpdk-dev] [PATCH 2/6] eal/linuxapp: rename to linux
2019-03-06 16:22 [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 1/6] eal/bsdapp: rename to freebsd Bruce Richardson
@ 2019-03-06 16:22 ` Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 3/6] build/linux: rename macro from LINUXAPP to LINUX Bruce Richardson
` (5 subsequent siblings)
7 siblings, 0 replies; 17+ messages in thread
From: Bruce Richardson @ 2019-03-06 16:22 UTC (permalink / raw)
To: dev; +Cc: Bruce Richardson
The term "linuxapp" is a legacy one, but just calling the subdirectory
"linux" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
MAINTAINERS | 8 ++++----
devtools/build-tags.sh | 2 +-
doc/guides/prog_guide/env_abstraction_layer.rst | 2 +-
drivers/bus/dpaa/Makefile | 2 +-
drivers/crypto/caam_jr/Makefile | 2 +-
drivers/crypto/dpaa2_sec/Makefile | 2 +-
drivers/crypto/dpaa_sec/Makefile | 2 +-
drivers/event/dpaa/Makefile | 2 +-
drivers/event/dpaa2/Makefile | 2 +-
drivers/mempool/dpaa2/Makefile | 2 +-
drivers/net/dpaa/Makefile | 2 +-
drivers/net/dpaa2/Makefile | 2 +-
drivers/raw/dpaa2_qdma/Makefile | 2 +-
kernel/linux/kni/meson.build | 2 +-
lib/librte_eal/Makefile | 4 ++--
lib/librte_eal/{linuxapp => linux}/Makefile | 0
lib/librte_eal/{linuxapp => linux}/eal/Makefile | 0
lib/librte_eal/{linuxapp => linux}/eal/eal.c | 0
lib/librte_eal/{linuxapp => linux}/eal/eal_alarm.c | 0
lib/librte_eal/{linuxapp => linux}/eal/eal_cpuflags.c | 0
lib/librte_eal/{linuxapp => linux}/eal/eal_debug.c | 0
lib/librte_eal/{linuxapp => linux}/eal/eal_dev.c | 0
.../{linuxapp => linux}/eal/eal_hugepage_info.c | 0
lib/librte_eal/{linuxapp => linux}/eal/eal_interrupts.c | 0
lib/librte_eal/{linuxapp => linux}/eal/eal_lcore.c | 0
lib/librte_eal/{linuxapp => linux}/eal/eal_log.c | 0
lib/librte_eal/{linuxapp => linux}/eal/eal_memalloc.c | 0
lib/librte_eal/{linuxapp => linux}/eal/eal_memory.c | 0
lib/librte_eal/{linuxapp => linux}/eal/eal_thread.c | 0
lib/librte_eal/{linuxapp => linux}/eal/eal_timer.c | 0
lib/librte_eal/{linuxapp => linux}/eal/eal_vfio.c | 0
lib/librte_eal/{linuxapp => linux}/eal/eal_vfio.h | 0
lib/librte_eal/{linuxapp => linux}/eal/eal_vfio_mp_sync.c | 0
.../eal/include/exec-env/rte_kni_common.h | 0
lib/librte_eal/{linuxapp => linux}/eal/meson.build | 0
lib/librte_eal/meson.build | 2 +-
36 files changed, 20 insertions(+), 20 deletions(-)
rename lib/librte_eal/{linuxapp => linux}/Makefile (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/Makefile (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_alarm.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_cpuflags.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_debug.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_dev.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_hugepage_info.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_interrupts.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_lcore.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_log.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_memalloc.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_memory.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_thread.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_timer.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_vfio.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_vfio.h (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/eal_vfio_mp_sync.c (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/include/exec-env/rte_kni_common.h (100%)
rename lib/librte_eal/{linuxapp => linux}/eal/meson.build (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 631f6f62e..01d0fe8c8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -173,7 +173,7 @@ F: lib/librte_eal/common/*malloc*
F: lib/librte_eal/common/eal_common_fbarray.c
F: lib/librte_eal/common/eal_common_mem*
F: lib/librte_eal/common/eal_hugepages.h
-F: lib/librte_eal/linuxapp/eal/eal_mem*
+F: lib/librte_eal/linux/eal/eal_mem*
F: lib/librte_eal/freebsd/eal/eal_mem*
F: doc/guides/prog_guide/env_abstraction_layer.rst
F: app/test/test_external_mem.c
@@ -244,8 +244,8 @@ F: lib/librte_eal/common/arch/x86/
F: lib/librte_eal/common/include/arch/x86/
Linux EAL (with overlaps)
-F: lib/librte_eal/linuxapp/Makefile
-F: lib/librte_eal/linuxapp/eal/
+F: lib/librte_eal/linux/Makefile
+F: lib/librte_eal/linux/eal/
F: doc/guides/linux_gsg/
Linux UIO
@@ -255,7 +255,7 @@ F: drivers/bus/pci/linux/*uio*
Linux VFIO
M: Anatoly Burakov <anatoly.burakov@intel.com>
-F: lib/librte_eal/linuxapp/eal/*vfio*
+F: lib/librte_eal/linux/eal/*vfio*
F: drivers/bus/pci/linux/*vfio*
FreeBSD EAL (with overlaps)
diff --git a/devtools/build-tags.sh b/devtools/build-tags.sh
index caf9c5348..67b12f65a 100755
--- a/devtools/build-tags.sh
+++ b/devtools/build-tags.sh
@@ -67,7 +67,7 @@ common_sources()
linux_sources()
{
- find_sources "lib/librte_eal/linuxapp" '*.[chS]'
+ find_sources "lib/librte_eal/linux" '*.[chS]'
}
bsd_sources()
diff --git a/doc/guides/prog_guide/env_abstraction_layer.rst b/doc/guides/prog_guide/env_abstraction_layer.rst
index 4f33c0c2d..8780928a6 100644
--- a/doc/guides/prog_guide/env_abstraction_layer.rst
+++ b/doc/guides/prog_guide/env_abstraction_layer.rst
@@ -346,7 +346,7 @@ To ease the idle polling with tiny throughput, it's useful to pause the polling
The RX interrupt is the first choice to be such kind of wake-up event, but probably won't be the only one.
EAL provides the event APIs for this event-driven thread mode.
-Taking linuxapp as an example, the implementation relies on epoll. Each thread can monitor an epoll instance
+Taking Linux as an example, the implementation relies on epoll. Each thread can monitor an epoll instance
in which all the wake-up events' file descriptors are added. The event file descriptors are created and mapped to
the interrupt vectors according to the UIO/VFIO spec.
From FreeBSD's perspective, kqueue is the alternative way, but not implemented yet.
diff --git a/drivers/bus/dpaa/Makefile b/drivers/bus/dpaa/Makefile
index 800e5cd20..248c024eb 100644
--- a/drivers/bus/dpaa/Makefile
+++ b/drivers/bus/dpaa/Makefile
@@ -17,7 +17,7 @@ CFLAGS += -Wno-cast-qual
CFLAGS += -I$(RTE_BUS_DPAA)/
CFLAGS += -I$(RTE_BUS_DPAA)/include
CFLAGS += -I$(RTE_BUS_DPAA)/base/qbman
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linux/eal
CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common/include
# versioning export map
diff --git a/drivers/crypto/caam_jr/Makefile b/drivers/crypto/caam_jr/Makefile
index 88cdf7410..b078453d7 100644
--- a/drivers/crypto/caam_jr/Makefile
+++ b/drivers/crypto/caam_jr/Makefile
@@ -21,7 +21,7 @@ CFLAGS += -I$(RTE_SDK)/drivers/crypto/caam_jr
#sharing the hw flib headers from dpaa2_sec pmd
CFLAGS += -I$(RTE_SDK)/drivers/crypto/dpaa2_sec/
CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common/include
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linux/eal
# versioning export map
EXPORT_MAP := rte_pmd_caam_jr_version.map
diff --git a/drivers/crypto/dpaa2_sec/Makefile b/drivers/crypto/dpaa2_sec/Makefile
index f537f76a6..63dbe8527 100644
--- a/drivers/crypto/dpaa2_sec/Makefile
+++ b/drivers/crypto/dpaa2_sec/Makefile
@@ -27,7 +27,7 @@ CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/mc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/portal
CFLAGS += -I$(RTE_SDK)/drivers/mempool/dpaa2/
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linux/eal
# versioning export map
EXPORT_MAP := rte_pmd_dpaa2_sec_version.map
diff --git a/drivers/crypto/dpaa_sec/Makefile b/drivers/crypto/dpaa_sec/Makefile
index 5ce95c23f..aa214c032 100644
--- a/drivers/crypto/dpaa_sec/Makefile
+++ b/drivers/crypto/dpaa_sec/Makefile
@@ -20,7 +20,7 @@ CFLAGS += -I$(RTE_SDK)/drivers/crypto/dpaa_sec/
#sharing the hw flib headers from dpaa2_sec pmd
CFLAGS += -I$(RTE_SDK)/drivers/crypto/dpaa2_sec/
CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common/include
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linux/eal
LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
LDLIBS += -lrte_cryptodev
diff --git a/drivers/event/dpaa/Makefile b/drivers/event/dpaa/Makefile
index 6f93e7f40..9b3d6bac4 100644
--- a/drivers/event/dpaa/Makefile
+++ b/drivers/event/dpaa/Makefile
@@ -20,7 +20,7 @@ CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa
CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa/include/
CFLAGS += -I$(RTE_SDK)/drivers/mempool/dpaa
CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common/include
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal/include
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linux/eal/include
EXPORT_MAP := rte_pmd_dpaa_event_version.map
diff --git a/drivers/event/dpaa2/Makefile b/drivers/event/dpaa2/Makefile
index e0134cc46..e245682cf 100644
--- a/drivers/event/dpaa2/Makefile
+++ b/drivers/event/dpaa2/Makefile
@@ -17,7 +17,7 @@ CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/mc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/portal
CFLAGS += -I$(RTE_SDK)/drivers/mempool/dpaa2
CFLAGS += -I$(RTE_SDK)/drivers/event/dpaa2
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linux/eal
LDLIBS += -lrte_eal -lrte_eventdev
LDLIBS += -lrte_bus_fslmc -lrte_mempool_dpaa2 -lrte_pmd_dpaa2
LDLIBS += -lrte_bus_vdev
diff --git a/drivers/mempool/dpaa2/Makefile b/drivers/mempool/dpaa2/Makefile
index 96c0f2b63..5f3e4eae9 100644
--- a/drivers/mempool/dpaa2/Makefile
+++ b/drivers/mempool/dpaa2/Makefile
@@ -13,7 +13,7 @@ CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linux/eal
# versioning export map
EXPORT_MAP := rte_mempool_dpaa2_version.map
diff --git a/drivers/net/dpaa/Makefile b/drivers/net/dpaa/Makefile
index 1c4f7d914..5b8e7f8da 100644
--- a/drivers/net/dpaa/Makefile
+++ b/drivers/net/dpaa/Makefile
@@ -21,7 +21,7 @@ CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa/base/qbman
CFLAGS += -I$(RTE_SDK)/drivers/mempool/dpaa
CFLAGS += -I$(RTE_SDK)/drivers/event/dpaa
CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common/include
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal/include
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linux/eal/include
EXPORT_MAP := rte_pmd_dpaa_version.map
diff --git a/drivers/net/dpaa2/Makefile b/drivers/net/dpaa2/Makefile
index 562551175..553731a04 100644
--- a/drivers/net/dpaa2/Makefile
+++ b/drivers/net/dpaa2/Makefile
@@ -19,7 +19,7 @@ CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/mc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/portal
CFLAGS += -I$(RTE_SDK)/drivers/mempool/dpaa2
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linux/eal
# versioning export map
EXPORT_MAP := rte_pmd_dpaa2_version.map
diff --git a/drivers/raw/dpaa2_qdma/Makefile b/drivers/raw/dpaa2_qdma/Makefile
index bdd99c976..5c75f5fa0 100644
--- a/drivers/raw/dpaa2_qdma/Makefile
+++ b/drivers/raw/dpaa2_qdma/Makefile
@@ -12,7 +12,7 @@ CFLAGS += -DALLOW_EXPERIMENTAL_API
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linux/eal
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include
diff --git a/kernel/linux/kni/meson.build b/kernel/linux/kni/meson.build
index a09af5aa5..877ff5c47 100644
--- a/kernel/linux/kni/meson.build
+++ b/kernel/linux/kni/meson.build
@@ -21,7 +21,7 @@ custom_target('rte_kni',
'src=' + meson.current_source_dir(),
'MODULE_CFLAGS=-include ' + meson.source_root() + '/config/rte_config.h' +
' -I' + meson.source_root() + '/lib/librte_eal/common/include' +
- ' -I' + meson.source_root() + '/lib/librte_eal/linuxapp/eal/include' +
+ ' -I' + meson.source_root() + '/lib/librte_eal/linux/eal/include' +
' -I' + meson.build_root() +
' -I' + meson.current_source_dir() +
' -I' + meson.current_source_dir() + '/ethtool/ixgbe' +
diff --git a/lib/librte_eal/Makefile b/lib/librte_eal/Makefile
index 39d64bb7a..c6bd39f02 100644
--- a/lib/librte_eal/Makefile
+++ b/lib/librte_eal/Makefile
@@ -4,8 +4,8 @@
include $(RTE_SDK)/mk/rte.vars.mk
DIRS-y += common
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += linuxapp
-DEPDIRS-linuxapp := common
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += linux
+DEPDIRS-linux := common
DIRS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += freebsd
DEPDIRS-freebsd := common
diff --git a/lib/librte_eal/linuxapp/Makefile b/lib/librte_eal/linux/Makefile
similarity index 100%
rename from lib/librte_eal/linuxapp/Makefile
rename to lib/librte_eal/linux/Makefile
diff --git a/lib/librte_eal/linuxapp/eal/Makefile b/lib/librte_eal/linux/eal/Makefile
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/Makefile
rename to lib/librte_eal/linux/eal/Makefile
diff --git a/lib/librte_eal/linuxapp/eal/eal.c b/lib/librte_eal/linux/eal/eal.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal.c
rename to lib/librte_eal/linux/eal/eal.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_alarm.c b/lib/librte_eal/linux/eal/eal_alarm.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_alarm.c
rename to lib/librte_eal/linux/eal/eal_alarm.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_cpuflags.c b/lib/librte_eal/linux/eal/eal_cpuflags.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_cpuflags.c
rename to lib/librte_eal/linux/eal/eal_cpuflags.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_debug.c b/lib/librte_eal/linux/eal/eal_debug.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_debug.c
rename to lib/librte_eal/linux/eal/eal_debug.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_dev.c b/lib/librte_eal/linux/eal/eal_dev.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_dev.c
rename to lib/librte_eal/linux/eal/eal_dev.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_hugepage_info.c b/lib/librte_eal/linux/eal/eal_hugepage_info.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_hugepage_info.c
rename to lib/librte_eal/linux/eal/eal_hugepage_info.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_interrupts.c b/lib/librte_eal/linux/eal/eal_interrupts.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_interrupts.c
rename to lib/librte_eal/linux/eal/eal_interrupts.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_lcore.c b/lib/librte_eal/linux/eal/eal_lcore.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_lcore.c
rename to lib/librte_eal/linux/eal/eal_lcore.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_log.c b/lib/librte_eal/linux/eal/eal_log.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_log.c
rename to lib/librte_eal/linux/eal/eal_log.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_memalloc.c b/lib/librte_eal/linux/eal/eal_memalloc.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_memalloc.c
rename to lib/librte_eal/linux/eal/eal_memalloc.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_memory.c b/lib/librte_eal/linux/eal/eal_memory.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_memory.c
rename to lib/librte_eal/linux/eal/eal_memory.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_thread.c b/lib/librte_eal/linux/eal/eal_thread.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_thread.c
rename to lib/librte_eal/linux/eal/eal_thread.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_timer.c b/lib/librte_eal/linux/eal/eal_timer.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_timer.c
rename to lib/librte_eal/linux/eal/eal_timer.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.c b/lib/librte_eal/linux/eal/eal_vfio.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_vfio.c
rename to lib/librte_eal/linux/eal/eal_vfio.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.h b/lib/librte_eal/linux/eal/eal_vfio.h
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_vfio.h
rename to lib/librte_eal/linux/eal/eal_vfio.h
diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c b/lib/librte_eal/linux/eal/eal_vfio_mp_sync.c
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c
rename to lib/librte_eal/linux/eal/eal_vfio_mp_sync.c
diff --git a/lib/librte_eal/linuxapp/eal/include/exec-env/rte_kni_common.h b/lib/librte_eal/linux/eal/include/exec-env/rte_kni_common.h
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/include/exec-env/rte_kni_common.h
rename to lib/librte_eal/linux/eal/include/exec-env/rte_kni_common.h
diff --git a/lib/librte_eal/linuxapp/eal/meson.build b/lib/librte_eal/linux/eal/meson.build
similarity index 100%
rename from lib/librte_eal/linuxapp/eal/meson.build
rename to lib/librte_eal/linux/eal/meson.build
diff --git a/lib/librte_eal/meson.build b/lib/librte_eal/meson.build
index 4ae0efccb..cb8d1094f 100644
--- a/lib/librte_eal/meson.build
+++ b/lib/librte_eal/meson.build
@@ -11,7 +11,7 @@ subdir('common') # defines common_sources, common_objs, etc.
# The <exec-env>/eal/meson.build file should define env_sources, etc.
if host_machine.system() == 'linux'
dpdk_conf.set('RTE_EXEC_ENV_LINUXAPP', 1)
- subdir('linuxapp/eal')
+ subdir('linux/eal')
elif host_machine.system() == 'freebsd'
dpdk_conf.set('RTE_EXEC_ENV_BSDAPP', 1)
--
2.20.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [dpdk-dev] [PATCH 3/6] build/linux: rename macro from LINUXAPP to LINUX
2019-03-06 16:22 [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 1/6] eal/bsdapp: rename to freebsd Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 2/6] eal/linuxapp: rename to linux Bruce Richardson
@ 2019-03-06 16:22 ` Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 4/6] build/freebsd: rename macro from BSDPAPP to FREEBSD Bruce Richardson
` (4 subsequent siblings)
7 siblings, 0 replies; 17+ messages in thread
From: Bruce Richardson @ 2019-03-06 16:22 UTC (permalink / raw)
To: dev; +Cc: Bruce Richardson
Rename the macro to make things shorter and more comprehensible. For
both meson and make builds, keep the old macro around for backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
app/test/process.h | 2 +-
app/test/test_eal_flags.c | 2 +-
app/test/test_interrupts.c | 4 +-
app/test/test_kni.c | 2 +-
app/test/test_mp_secondary.c | 6 +-
app/test/test_pdump.c | 2 +-
app/test/test_timer_perf.c | 2 +-
app/test/test_timer_racecond.c | 2 +-
config/common_linuxapp | 1 +
config/rte_config.h | 5 +
doc/guides/contributing/design.rst | 2 +-
drivers/bus/pci/Makefile | 2 +-
drivers/bus/vmbus/Makefile | 2 +-
drivers/crypto/virtio/virtio_pci.c | 2 +-
drivers/net/ark/Makefile | 2 +-
drivers/net/failsafe/Makefile | 2 +-
drivers/net/pcap/rte_eth_pcap.c | 2 +-
drivers/net/sfc/sfc_intr.c | 2 +-
drivers/net/softnic/rte_eth_softnic_tap.c | 4 +-
drivers/net/virtio/virtio_pci.c | 2 +-
examples/ethtool/Makefile | 2 +-
examples/ethtool/lib/Makefile | 2 +-
examples/exception_path/main.c | 4 +-
examples/ip_pipeline/Makefile | 2 +-
examples/ip_pipeline/tap.c | 4 +-
examples/kni/Makefile | 2 +-
examples/l3fwd-power/Makefile | 2 +-
examples/multi_process/Makefile | 8 +-
.../multi_process/client_server_mp/Makefile | 4 +-
.../client_server_mp/mp_server/Makefile | 2 +-
examples/netmap_compat/bridge/Makefile | 2 +-
.../pthread_shim/pthread_shim.c | 2 +-
examples/qos_sched/Makefile | 2 +-
examples/quota_watermark/Makefile | 4 +-
examples/server_node_efd/Makefile | 4 +-
examples/server_node_efd/server/Makefile | 2 +-
examples/tep_termination/Makefile | 2 +-
examples/vhost/Makefile | 2 +-
examples/vhost_crypto/Makefile | 2 +-
examples/vhost_scsi/Makefile | 2 +-
kernel/Makefile | 2 +-
lib/Makefile | 2 +-
lib/librte_eal/Makefile | 2 +-
lib/librte_eal/common/arch/x86/rte_cycles.c | 2 +-
lib/librte_eal/linux/Makefile | 2 +-
lib/librte_eal/linux/eal/Makefile | 98 +++++++++----------
lib/librte_eal/meson.build | 2 +-
lib/librte_eventdev/Makefile | 2 +-
lib/librte_kni/rte_kni.c | 2 +-
mk/rte.app.mk | 4 +-
50 files changed, 115 insertions(+), 109 deletions(-)
diff --git a/app/test/process.h b/app/test/process.h
index 7f62f644f..998d65316 100644
--- a/app/test/process.h
+++ b/app/test/process.h
@@ -82,7 +82,7 @@ process_dup(const char *const argv[], int numargs, const char *env_value)
/* FreeBSD doesn't support file prefixes, so force compile failures for any
* tests attempting to use this function on FreeBSD.
*/
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
static char *
get_current_prefix(char *prefix, int size)
{
diff --git a/app/test/test_eal_flags.c b/app/test/test_eal_flags.c
index 81e345b87..e2864107c 100644
--- a/app/test/test_eal_flags.c
+++ b/app/test/test_eal_flags.c
@@ -190,7 +190,7 @@ process_hugefiles(const char * prefix, enum hugepage_action action)
return result;
}
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
/*
* count the number of "node*" files in /sys/devices/system/node/
*/
diff --git a/app/test/test_interrupts.c b/app/test/test_interrupts.c
index 4e82e9a22..d8c2d8124 100644
--- a/app/test/test_interrupts.c
+++ b/app/test/test_interrupts.c
@@ -31,7 +31,7 @@ static struct rte_intr_handle intr_handles[TEST_INTERRUPT_HANDLE_MAX];
static enum test_interrupt_handle_type test_intr_type =
TEST_INTERRUPT_HANDLE_MAX;
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
union intr_pipefds{
struct {
int pipefd[2];
@@ -169,7 +169,7 @@ test_interrupt_handle_compare(struct rte_intr_handle *intr_handle_l,
return 0;
}
-#endif /* RTE_EXEC_ENV_LINUXAPP */
+#endif /* RTE_EXEC_ENV_LINUX */
/**
* Callback for the test interrupt.
diff --git a/app/test/test_kni.c b/app/test/test_kni.c
index c92c09054..7a65de179 100644
--- a/app/test/test_kni.c
+++ b/app/test/test_kni.c
@@ -11,7 +11,7 @@
#include "test.h"
-#if !defined(RTE_EXEC_ENV_LINUXAPP) || !defined(RTE_LIBRTE_KNI)
+#if !defined(RTE_EXEC_ENV_LINUX) || !defined(RTE_LIBRTE_KNI)
static int
test_kni(void)
diff --git a/app/test/test_mp_secondary.c b/app/test/test_mp_secondary.c
index b597dfcdf..2ac33f781 100644
--- a/app/test/test_mp_secondary.c
+++ b/app/test/test_mp_secondary.c
@@ -60,7 +60,7 @@ run_secondary_instances(void)
int ret = 0;
char coremask[10];
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
char tmp[PATH_MAX] = {0};
char prefix[PATH_MAX] = {0};
@@ -86,7 +86,7 @@ run_secondary_instances(void)
prgname, "-c", coremask, "--proc-type=ERROR",
prefix
};
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
/* bad case, using invalid file prefix */
const char *argv4[] = {
prgname, "-c", coremask, "--proc-type=secondary",
@@ -101,7 +101,7 @@ run_secondary_instances(void)
ret |= launch_proc(argv2);
ret |= !(launch_proc(argv3));
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
ret |= !(launch_proc(argv4));
#endif
diff --git a/app/test/test_pdump.c b/app/test/test_pdump.c
index 4a894c0e1..af206968b 100644
--- a/app/test/test_pdump.c
+++ b/app/test/test_pdump.c
@@ -172,7 +172,7 @@ run_pdump_server_tests(void)
int ret = 0;
char coremask[10];
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
char tmp[PATH_MAX] = { 0 };
char prefix[PATH_MAX] = { 0 };
diff --git a/app/test/test_timer_perf.c b/app/test/test_timer_perf.c
index 0fe2b74cd..0ede4b3e4 100644
--- a/app/test/test_timer_perf.c
+++ b/app/test/test_timer_perf.c
@@ -27,7 +27,7 @@ timer_cb(struct rte_timer *t __rte_unused, void *param __rte_unused)
#define DELAY_SECONDS 1
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
#define do_delay() usleep(10)
#else
#define do_delay() rte_pause()
diff --git a/app/test/test_timer_racecond.c b/app/test/test_timer_racecond.c
index d29048eaf..1edb44444 100644
--- a/app/test/test_timer_racecond.c
+++ b/app/test/test_timer_racecond.c
@@ -46,7 +46,7 @@
#undef TEST_TIMER_RACECOND_VERBOSE
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
#define usec_delay(us) usleep(us)
#else
#define usec_delay(us) rte_delay_us(us)
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 6c1c8d0f4..75334273d 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -4,6 +4,7 @@
#include "common_base"
CONFIG_RTE_EXEC_ENV="linuxapp"
+CONFIG_RTE_EXEC_ENV_LINUX=y
CONFIG_RTE_EXEC_ENV_LINUXAPP=y
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=y
diff --git a/config/rte_config.h b/config/rte_config.h
index 7606f5d7b..9b2e813f0 100644
--- a/config/rte_config.h
+++ b/config/rte_config.h
@@ -18,6 +18,11 @@
#include <rte_build_config.h>
+/* legacy defines */
+#ifdef RTE_EXEC_ENV_LINUX
+#define RTE_EXEC_ENV_LINUXAPP 1
+#endif
+
/****** library defines ********/
/* compat defines */
diff --git a/doc/guides/contributing/design.rst b/doc/guides/contributing/design.rst
index 651fd224f..8779c4bc0 100644
--- a/doc/guides/contributing/design.rst
+++ b/doc/guides/contributing/design.rst
@@ -55,7 +55,7 @@ Per Execution Environment Sources
The following config options can be used:
* ``CONFIG_RTE_EXEC_ENV`` is a string that contains the name of the executive environment.
-* ``CONFIG_RTE_EXEC_ENV_BSDAPP`` or ``CONFIG_RTE_EXEC_ENV_LINUXAPP`` are defined only if we are building for this execution environment.
+* ``CONFIG_RTE_EXEC_ENV_BSDAPP`` or ``CONFIG_RTE_EXEC_ENV_LINUX`` are defined only if we are building for this execution environment.
Library Statistics
------------------
diff --git a/drivers/bus/pci/Makefile b/drivers/bus/pci/Makefile
index f33e0120f..88154b4de 100644
--- a/drivers/bus/pci/Makefile
+++ b/drivers/bus/pci/Makefile
@@ -11,7 +11,7 @@ CFLAGS := -I$(SRCDIR) $(CFLAGS)
CFLAGS += -O3 $(WERROR_FLAGS)
CFLAGS += -DALLOW_EXPERIMENTAL_API
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),)
SYSTEM := linux
endif
ifneq ($(CONFIG_RTE_EXEC_ENV_BSDAPP),)
diff --git a/drivers/bus/vmbus/Makefile b/drivers/bus/vmbus/Makefile
index e54c557c6..3a344fc9c 100644
--- a/drivers/bus/vmbus/Makefile
+++ b/drivers/bus/vmbus/Makefile
@@ -10,7 +10,7 @@ CFLAGS += -I$(SRCDIR)
CFLAGS += -O3 $(WERROR_FLAGS)
CFLAGS += -DALLOW_EXPERIMENTAL_API
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),)
SYSTEM := linux
endif
ifneq ($(CONFIG_RTE_EXEC_ENV_BSDAPP),)
diff --git a/drivers/crypto/virtio/virtio_pci.c b/drivers/crypto/virtio/virtio_pci.c
index 832c465bc..0c0c64471 100644
--- a/drivers/crypto/virtio/virtio_pci.c
+++ b/drivers/crypto/virtio/virtio_pci.c
@@ -4,7 +4,7 @@
#include <stdint.h>
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
#include <dirent.h>
#include <fcntl.h>
#endif
diff --git a/drivers/net/ark/Makefile b/drivers/net/ark/Makefile
index 2e232be85..34d341c23 100644
--- a/drivers/net/ark/Makefile
+++ b/drivers/net/ark/Makefile
@@ -31,7 +31,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_ARK_PMD) += ark_udm.c
# this lib depends upon:
LDLIBS += -lpthread
-ifdef CONFIG_RTE_EXEC_ENV_LINUXAPP
+ifdef CONFIG_RTE_EXEC_ENV_LINUX
LDLIBS += -ldl
endif
LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index 81802d092..0d840a272 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -20,7 +20,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_flow.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_intr.c
-ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifeq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
CFLAGS += -DLINUX
else
CFLAGS += -DBSD
diff --git a/drivers/net/pcap/rte_eth_pcap.c b/drivers/net/pcap/rte_eth_pcap.c
index 65bbd7e2f..518d9e34a 100644
--- a/drivers/net/pcap/rte_eth_pcap.c
+++ b/drivers/net/pcap/rte_eth_pcap.c
@@ -979,7 +979,7 @@ static int
eth_pcap_update_mac(const char *if_name, struct rte_eth_dev *eth_dev,
const unsigned int numa_node)
{
-#if defined(RTE_EXEC_ENV_LINUXAPP)
+#if defined(RTE_EXEC_ENV_LINUX)
void *mac_addrs;
struct ifreq ifr;
int if_fd = socket(AF_INET, SOCK_DGRAM, 0);
diff --git a/drivers/net/sfc/sfc_intr.c b/drivers/net/sfc/sfc_intr.c
index fbdc7eea1..0fbcd61af 100644
--- a/drivers/net/sfc/sfc_intr.c
+++ b/drivers/net/sfc/sfc_intr.c
@@ -292,7 +292,7 @@ sfc_intr_attach(struct sfc_adapter *sa)
sfc_log_init(sa, "entry");
switch (pci_dev->intr_handle.type) {
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
case RTE_INTR_HANDLE_UIO_INTX:
case RTE_INTR_HANDLE_VFIO_LEGACY:
intr->type = EFX_INTR_LINE;
diff --git a/drivers/net/softnic/rte_eth_softnic_tap.c b/drivers/net/softnic/rte_eth_softnic_tap.c
index bcc23a9f0..0cac876ed 100644
--- a/drivers/net/softnic/rte_eth_softnic_tap.c
+++ b/drivers/net/softnic/rte_eth_softnic_tap.c
@@ -3,7 +3,7 @@
*/
#include <netinet/in.h>
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
#include <linux/if.h>
#include <linux/if_tun.h>
#endif
@@ -60,7 +60,7 @@ softnic_tap_find(struct pmd_internals *p,
return NULL;
}
-#ifndef RTE_EXEC_ENV_LINUXAPP
+#ifndef RTE_EXEC_ENV_LINUX
struct softnic_tap *
softnic_tap_create(struct pmd_internals *p __rte_unused,
diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
index c8883c32e..adc02f96a 100644
--- a/drivers/net/virtio/virtio_pci.c
+++ b/drivers/net/virtio/virtio_pci.c
@@ -3,7 +3,7 @@
*/
#include <stdint.h>
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
#include <dirent.h>
#include <fcntl.h>
#endif
diff --git a/examples/ethtool/Makefile b/examples/ethtool/Makefile
index 3d9d4f06e..70a4f5dc9 100644
--- a/examples/ethtool/Makefile
+++ b/examples/ethtool/Makefile
@@ -10,7 +10,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
$(info This application can only operate in a linuxapp environment, \
please change the definition of the RTE_TARGET environment variable)
else
diff --git a/examples/ethtool/lib/Makefile b/examples/ethtool/lib/Makefile
index 6eaa640bc..ee83b8769 100644
--- a/examples/ethtool/lib/Makefile
+++ b/examples/ethtool/lib/Makefile
@@ -10,7 +10,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
$(error This application can only operate in a linuxapp environment, \
please change the definition of the RTE_TARGET environment variable)
endif
diff --git a/examples/exception_path/main.c b/examples/exception_path/main.c
index 4180a8689..8f37f5fbf 100644
--- a/examples/exception_path/main.c
+++ b/examples/exception_path/main.c
@@ -14,7 +14,7 @@
#include <netinet/in.h>
#include <net/if.h>
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
#include <linux/if_tun.h>
#endif
#include <fcntl.h>
@@ -156,7 +156,7 @@ signal_handler(int signum)
}
}
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
/*
* Create a tap network interface, or use existing one with same name.
* If name[0]='\0' then a name is automatically assigned and returned in name.
diff --git a/examples/ip_pipeline/Makefile b/examples/ip_pipeline/Makefile
index 41ba7df2c..8b1744d0d 100644
--- a/examples/ip_pipeline/Makefile
+++ b/examples/ip_pipeline/Makefile
@@ -68,7 +68,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
$(info This application can only operate in a linuxapp environment, \
please change the definition of the RTE_TARGET environment variable)
all:
diff --git a/examples/ip_pipeline/tap.c b/examples/ip_pipeline/tap.c
index 11e4ad20e..ea979bdf8 100644
--- a/examples/ip_pipeline/tap.c
+++ b/examples/ip_pipeline/tap.c
@@ -3,7 +3,7 @@
*/
#include <netinet/in.h>
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
#include <linux/if.h>
#include <linux/if_tun.h>
#endif
@@ -46,7 +46,7 @@ tap_find(const char *name)
return NULL;
}
-#ifndef RTE_EXEC_ENV_LINUXAPP
+#ifndef RTE_EXEC_ENV_LINUX
struct tap *
tap_create(const char *name __rte_unused)
diff --git a/examples/kni/Makefile b/examples/kni/Makefile
index dd90d7d73..096ec4d97 100644
--- a/examples/kni/Makefile
+++ b/examples/kni/Makefile
@@ -49,7 +49,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
$(error This application can only operate in a linuxapp environment, \
please change the definition of the RTE_TARGET environment variable)
endif
diff --git a/examples/l3fwd-power/Makefile b/examples/l3fwd-power/Makefile
index 772ec7ba5..61f151c12 100644
--- a/examples/l3fwd-power/Makefile
+++ b/examples/l3fwd-power/Makefile
@@ -50,7 +50,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
$(info This application can only operate in a linuxapp environment, \
please change the definition of the RTE_TARGET environment variable)
all:
diff --git a/examples/multi_process/Makefile b/examples/multi_process/Makefile
index b76b02fcb..4514014a0 100644
--- a/examples/multi_process/Makefile
+++ b/examples/multi_process/Makefile
@@ -10,9 +10,9 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += client_server_mp
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += simple_mp
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += symmetric_mp
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += hotplug_mp
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += client_server_mp
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += simple_mp
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += symmetric_mp
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += hotplug_mp
include $(RTE_SDK)/mk/rte.extsubdir.mk
diff --git a/examples/multi_process/client_server_mp/Makefile b/examples/multi_process/client_server_mp/Makefile
index 6f6c45228..76f895175 100644
--- a/examples/multi_process/client_server_mp/Makefile
+++ b/examples/multi_process/client_server_mp/Makefile
@@ -10,7 +10,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += mp_client
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += mp_server
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += mp_client
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += mp_server
include $(RTE_SDK)/mk/rte.extsubdir.mk
diff --git a/examples/multi_process/client_server_mp/mp_server/Makefile b/examples/multi_process/client_server_mp/mp_server/Makefile
index 9c1caae79..09ee270c0 100644
--- a/examples/multi_process/client_server_mp/mp_server/Makefile
+++ b/examples/multi_process/client_server_mp/mp_server/Makefile
@@ -10,7 +10,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
$(error This application can only operate in a linuxapp environment, \
please change the definition of the RTE_TARGET environment variable)
endif
diff --git a/examples/netmap_compat/bridge/Makefile b/examples/netmap_compat/bridge/Makefile
index 856c847bd..4c8981acb 100644
--- a/examples/netmap_compat/bridge/Makefile
+++ b/examples/netmap_compat/bridge/Makefile
@@ -10,7 +10,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
$(info This application can only operate in a linuxapp environment, \
please change the definition of the RTE_TARGET environment variable)
all:
diff --git a/examples/performance-thread/pthread_shim/pthread_shim.c b/examples/performance-thread/pthread_shim/pthread_shim.c
index a02de0677..93e8dca3f 100644
--- a/examples/performance-thread/pthread_shim/pthread_shim.c
+++ b/examples/performance-thread/pthread_shim/pthread_shim.c
@@ -558,7 +558,7 @@ int pthread_rwlock_wrlock(pthread_rwlock_t *a)
return _sys_pthread_funcs.f_pthread_rwlock_wrlock(a);
}
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
int
pthread_yield(void)
{
diff --git a/examples/qos_sched/Makefile b/examples/qos_sched/Makefile
index 45b0a9eb6..e0d298345 100644
--- a/examples/qos_sched/Makefile
+++ b/examples/qos_sched/Makefile
@@ -48,7 +48,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
$(info This application can only operate in a linuxapp environment, \
please change the definition of the RTE_TARGET environment variable)
all:
diff --git a/examples/quota_watermark/Makefile b/examples/quota_watermark/Makefile
index a37b8662f..ec7d989ae 100644
--- a/examples/quota_watermark/Makefile
+++ b/examples/quota_watermark/Makefile
@@ -10,7 +10,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += qw
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += qwctl
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += qw
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += qwctl
include $(RTE_SDK)/mk/rte.extsubdir.mk
diff --git a/examples/server_node_efd/Makefile b/examples/server_node_efd/Makefile
index d23aba350..de90253fe 100644
--- a/examples/server_node_efd/Makefile
+++ b/examples/server_node_efd/Makefile
@@ -10,7 +10,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += server
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += node
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += server
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += node
include $(RTE_SDK)/mk/rte.extsubdir.mk
diff --git a/examples/server_node_efd/server/Makefile b/examples/server_node_efd/server/Makefile
index df6614c60..1ca958abb 100644
--- a/examples/server_node_efd/server/Makefile
+++ b/examples/server_node_efd/server/Makefile
@@ -10,7 +10,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
$(error This application can only operate in a linuxapp environment, \
please change the definition of the RTE_TARGET environment variable)
endif
diff --git a/examples/tep_termination/Makefile b/examples/tep_termination/Makefile
index 4c1564325..44af6ca52 100644
--- a/examples/tep_termination/Makefile
+++ b/examples/tep_termination/Makefile
@@ -52,7 +52,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
$(error This application can only operate in a linuxapp environment, \
please change the definition of the RTE_TARGET environment variable)
endif
diff --git a/examples/vhost/Makefile b/examples/vhost/Makefile
index c6964381b..540ccaaee 100644
--- a/examples/vhost/Makefile
+++ b/examples/vhost/Makefile
@@ -52,7 +52,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
$(info This application can only operate in a linuxapp environment, \
please change the definition of the RTE_TARGET environment variable)
all:
diff --git a/examples/vhost_crypto/Makefile b/examples/vhost_crypto/Makefile
index a620abf49..719cc5595 100644
--- a/examples/vhost_crypto/Makefile
+++ b/examples/vhost_crypto/Makefile
@@ -10,7 +10,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
$(info This application can only operate in a linuxapp environment, \
please change the definition of the RTE_TARGET environment variable)
all:
diff --git a/examples/vhost_scsi/Makefile b/examples/vhost_scsi/Makefile
index 523aee0bf..3392d24b2 100644
--- a/examples/vhost_scsi/Makefile
+++ b/examples/vhost_scsi/Makefile
@@ -51,7 +51,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
include $(RTE_SDK)/mk/rte.vars.mk
-ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
$(info This application can only operate in a linuxapp environment, \
please change the definition of the RTE_TARGET environment variable)
all:
diff --git a/kernel/Makefile b/kernel/Makefile
index 8948d0425..6716b566c 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -3,7 +3,7 @@
include $(RTE_SDK)/mk/rte.vars.mk
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += linux
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += linux
DIRS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += freebsd
include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/lib/Makefile b/lib/Makefile
index ffbfd0d94..a358f1c19 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -110,7 +110,7 @@ DEPDIRS-librte_ipsec := librte_eal librte_mbuf librte_cryptodev librte_security
DIRS-$(CONFIG_RTE_LIBRTE_TELEMETRY) += librte_telemetry
DEPDIRS-librte_telemetry := librte_eal librte_metrics librte_ethdev
-ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifeq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
DIRS-$(CONFIG_RTE_LIBRTE_KNI) += librte_kni
endif
DEPDIRS-librte_kni := librte_eal librte_mempool librte_mbuf librte_ethdev
diff --git a/lib/librte_eal/Makefile b/lib/librte_eal/Makefile
index c6bd39f02..8b773da70 100644
--- a/lib/librte_eal/Makefile
+++ b/lib/librte_eal/Makefile
@@ -4,7 +4,7 @@
include $(RTE_SDK)/mk/rte.vars.mk
DIRS-y += common
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += linux
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += linux
DEPDIRS-linux := common
DIRS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += freebsd
DEPDIRS-freebsd := common
diff --git a/lib/librte_eal/common/arch/x86/rte_cycles.c b/lib/librte_eal/common/arch/x86/rte_cycles.c
index 23c67d24c..edd9621ab 100644
--- a/lib/librte_eal/common/arch/x86/rte_cycles.c
+++ b/lib/librte_eal/common/arch/x86/rte_cycles.c
@@ -29,7 +29,7 @@ rte_cpu_get_model(uint32_t fam_mod_step)
static int32_t
rdmsr(int msr, uint64_t *val)
{
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
int fd;
int ret;
diff --git a/lib/librte_eal/linux/Makefile b/lib/librte_eal/linux/Makefile
index a0fffa98e..4c68bd61b 100644
--- a/lib/librte_eal/linux/Makefile
+++ b/lib/librte_eal/linux/Makefile
@@ -3,7 +3,7 @@
include $(RTE_SDK)/mk/rte.vars.mk
-DIRS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal
+DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal
DEPDIRS-kni := eal
CFLAGS += -DALLOW_EXPERIMENTAL_API
diff --git a/lib/librte_eal/linux/eal/Makefile b/lib/librte_eal/linux/eal/Makefile
index 51deb5797..9e32f1174 100644
--- a/lib/librte_eal/linux/eal/Makefile
+++ b/lib/librte_eal/linux/eal/Makefile
@@ -30,58 +30,58 @@ LDLIBS += -lnuma
endif
# specific to linuxapp exec-env
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) := eal.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_cpuflags.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_hugepage_info.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_memory.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_thread.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_log.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_vfio.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_vfio_mp_sync.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_memalloc.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_debug.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_lcore.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_timer.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_interrupts.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_alarm.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_dev.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) := eal.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_cpuflags.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_hugepage_info.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_memory.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_thread.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_log.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_vfio.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_vfio_mp_sync.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_memalloc.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_debug.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_lcore.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_timer.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_interrupts.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_alarm.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_dev.c
# from common dir
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_lcore.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_timer.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_memzone.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_log.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_launch.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_memalloc.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_memory.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_tailqs.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_errno.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_cpuflags.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_hypervisor.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_string_fns.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_hexdump.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_devargs.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_class.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_bus.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_dev.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_options.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_thread.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_proc.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_fbarray.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_uuid.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += rte_malloc.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += hotplug_mp.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += malloc_elem.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += malloc_heap.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += malloc_mp.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += rte_keepalive.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += rte_option.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += rte_service.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += rte_reciprocal.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_lcore.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_timer.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_memzone.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_log.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_launch.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_memalloc.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_memory.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_tailqs.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_errno.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_cpuflags.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_hypervisor.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_string_fns.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_hexdump.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_devargs.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_class.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_bus.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_dev.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_options.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_thread.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_proc.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_fbarray.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_common_uuid.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += rte_malloc.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += hotplug_mp.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += malloc_elem.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += malloc_heap.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += malloc_mp.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += rte_keepalive.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += rte_option.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += rte_service.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += rte_reciprocal.c
# from arch dir
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += rte_cpuflags.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += rte_hypervisor.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += rte_cpuflags.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += rte_hypervisor.c
SRCS-$(CONFIG_RTE_ARCH_X86) += rte_spinlock.c
SRCS-y += rte_cycles.c
@@ -95,7 +95,7 @@ endif
INC := rte_kni_common.h
-SYMLINK-$(CONFIG_RTE_EXEC_ENV_LINUXAPP)-include/exec-env := \
+SYMLINK-$(CONFIG_RTE_EXEC_ENV_LINUX)-include/exec-env := \
$(addprefix include/exec-env/,$(INC))
include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_eal/meson.build b/lib/librte_eal/meson.build
index cb8d1094f..61b1016af 100644
--- a/lib/librte_eal/meson.build
+++ b/lib/librte_eal/meson.build
@@ -10,7 +10,7 @@ subdir('common') # defines common_sources, common_objs, etc.
# Now do OS/exec-env specific settings, including building kernel modules
# The <exec-env>/eal/meson.build file should define env_sources, etc.
if host_machine.system() == 'linux'
- dpdk_conf.set('RTE_EXEC_ENV_LINUXAPP', 1)
+ dpdk_conf.set('RTE_EXEC_ENV_LINUX', 1)
subdir('linux/eal')
elif host_machine.system() == 'freebsd'
diff --git a/lib/librte_eventdev/Makefile b/lib/librte_eventdev/Makefile
index 949618700..53079f4c2 100644
--- a/lib/librte_eventdev/Makefile
+++ b/lib/librte_eventdev/Makefile
@@ -14,7 +14,7 @@ LIBABIVER := 6
CFLAGS += -DALLOW_EXPERIMENTAL_API
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
-ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifeq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
CFLAGS += -DLINUX
else
CFLAGS += -DBSD
diff --git a/lib/librte_kni/rte_kni.c b/lib/librte_kni/rte_kni.c
index 73aeccccf..492e207a3 100644
--- a/lib/librte_kni/rte_kni.c
+++ b/lib/librte_kni/rte_kni.c
@@ -2,7 +2,7 @@
* Copyright(c) 2010-2014 Intel Corporation
*/
-#ifndef RTE_EXEC_ENV_LINUXAPP
+#ifndef RTE_EXEC_ENV_LINUX
#error "KNI is not supported"
#endif
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index d0ab942d5..e2712047a 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -97,7 +97,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE) += -lrte_cmdline
_LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER) += -lrte_reorder
_LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lrte_sched
-ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+ifeq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_KNI) += -lrte_kni
endif
@@ -306,7 +306,7 @@ ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
# The static libraries do not know their dependencies.
# So linking with static library requires explicit dependencies.
_LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lrt
-ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP)$(CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES),yy)
+ifeq ($(CONFIG_RTE_EXEC_ENV_LINUX)$(CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES),yy)
_LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lnuma
endif
_LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lm
--
2.20.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [dpdk-dev] [PATCH 4/6] build/freebsd: rename macro from BSDPAPP to FREEBSD
2019-03-06 16:22 [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names Bruce Richardson
` (2 preceding siblings ...)
2019-03-06 16:22 ` [dpdk-dev] [PATCH 3/6] build/linux: rename macro from LINUXAPP to LINUX Bruce Richardson
@ 2019-03-06 16:22 ` Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 5/6] build/meson: change linuxapp to linux in meson cross files Bruce Richardson
` (3 subsequent siblings)
7 siblings, 0 replies; 17+ messages in thread
From: Bruce Richardson @ 2019-03-06 16:22 UTC (permalink / raw)
To: dev; +Cc: Bruce Richardson
Rename the macro and all instances in DPDK code, but keep a copy of
the old macro defined for legacy code linking against DPDK
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
app/test-bbdev/test_bbdev_vector.c | 2 +-
.../cperf_test_vector_parsing.c | 2 +-
app/test-pmd/testpmd.c | 2 +-
app/test/process.h | 2 +-
app/test/test_alarm.c | 2 +-
app/test/test_eal_flags.c | 32 +++----
app/test/test_eal_fs.c | 2 +-
app/test/test_errno.c | 2 +-
app/test/test_mempool.c | 2 +-
config/common_bsdapp | 2 +-
config/rte_config.h | 3 +
doc/guides/contributing/design.rst | 2 +-
drivers/bus/pci/Makefile | 2 +-
drivers/bus/vmbus/Makefile | 2 +-
drivers/net/failsafe/failsafe_private.h | 2 +-
drivers/net/pcap/rte_eth_pcap.c | 4 +-
kernel/Makefile | 2 +-
kernel/freebsd/Makefile | 4 +-
lib/librte_eal/Makefile | 2 +-
lib/librte_eal/common/eal_common_errno.c | 2 +-
.../common/include/generic/rte_byteorder.h | 2 +-
.../common/include/rte_string_fns.h | 4 +-
lib/librte_eal/freebsd/Makefile | 2 +-
lib/librte_eal/freebsd/eal/Makefile | 92 +++++++++----------
lib/librte_eal/meson.build | 2 +-
25 files changed, 90 insertions(+), 87 deletions(-)
diff --git a/app/test-bbdev/test_bbdev_vector.c b/app/test-bbdev/test_bbdev_vector.c
index 45fe999c5..e4f68e2a6 100644
--- a/app/test-bbdev/test_bbdev_vector.c
+++ b/app/test-bbdev/test_bbdev_vector.c
@@ -2,7 +2,7 @@
* Copyright(c) 2017 Intel Corporation
*/
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
#define _WITH_GETLINE
#endif
#include <stdio.h>
diff --git a/app/test-crypto-perf/cperf_test_vector_parsing.c b/app/test-crypto-perf/cperf_test_vector_parsing.c
index 92932a230..1e9dfcfff 100644
--- a/app/test-crypto-perf/cperf_test_vector_parsing.c
+++ b/app/test-crypto-perf/cperf_test_vector_parsing.c
@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2016-2017 Intel Corporation
*/
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
#define _WITH_GETLINE
#endif
#include <stdio.h>
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 98c1baa8b..d9d0c16d4 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -3125,7 +3125,7 @@ main(int argc, char** argv)
#endif
/* on FreeBSD, mlockall() is disabled by default */
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
do_mlockall = 0;
#else
do_mlockall = 1;
diff --git a/app/test/process.h b/app/test/process.h
index 998d65316..2701127a2 100644
--- a/app/test/process.h
+++ b/app/test/process.h
@@ -11,7 +11,7 @@
#include <unistd.h> /* readlink */
#include <sys/wait.h>
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
#define self "curproc"
#define exe "file"
#else
diff --git a/app/test/test_alarm.c b/app/test/test_alarm.c
index d1284b379..951b7f07b 100644
--- a/app/test/test_alarm.c
+++ b/app/test/test_alarm.c
@@ -178,7 +178,7 @@ static int
test_alarm(void)
{
int count = 0;
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
printf("The alarm API is not supported on FreeBSD\n");
return 0;
#endif
diff --git a/app/test/test_eal_flags.c b/app/test/test_eal_flags.c
index e2864107c..1a64b0900 100644
--- a/app/test/test_eal_flags.c
+++ b/app/test/test_eal_flags.c
@@ -231,7 +231,7 @@ static int
test_whitelist_flag(void)
{
unsigned i;
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char * prefix = "";
#else
@@ -297,7 +297,7 @@ test_whitelist_flag(void)
static int
test_invalid_b_flag(void)
{
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char * prefix = "";
#else
@@ -344,7 +344,7 @@ test_invalid_b_flag(void)
static int
test_invalid_vdev_flag(void)
{
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point, and we also need to
* run another primary process here */
const char * prefix = no_shconf;
@@ -398,7 +398,7 @@ test_invalid_vdev_flag(void)
static int
test_invalid_r_flag(void)
{
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char * prefix = "";
#else
@@ -442,7 +442,7 @@ test_invalid_r_flag(void)
static int
test_missing_c_flag(void)
{
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char * prefix = "";
#else
@@ -592,7 +592,7 @@ test_missing_c_flag(void)
static int
test_master_lcore_flag(void)
{
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char *prefix = "";
#else
@@ -640,7 +640,7 @@ test_master_lcore_flag(void)
static int
test_invalid_n_flag(void)
{
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char * prefix = "";
#else
@@ -690,7 +690,7 @@ test_no_hpet_flag(void)
{
char prefix[PATH_MAX] = "";
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
return 0;
#else
char tmp[PATH_MAX];
@@ -724,7 +724,7 @@ test_no_hpet_flag(void)
static int
test_no_huge_flag(void)
{
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point, and we also need to
* run another primary process here */
const char * prefix = no_shconf;
@@ -752,7 +752,7 @@ test_no_huge_flag(void)
printf("Error - process did not run ok with --no-huge and -m flags\n");
return -1;
}
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target does not support NUMA, hence no --socket-mem tests */
return 0;
#endif
@@ -774,7 +774,7 @@ static int
test_misc_flags(void)
{
char hugepath[PATH_MAX] = {0};
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char * prefix = "";
const char * nosh_prefix = "";
@@ -898,7 +898,7 @@ test_misc_flags(void)
return -1;
}
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* no more tests to be done on FreeBSD */
return 0;
#endif
@@ -978,7 +978,7 @@ test_file_prefix(void)
*/
char prefix[PATH_MAX] = "";
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
return 0;
#else
if (get_current_prefix(prefix, sizeof(prefix)) == NULL) {
@@ -1138,7 +1138,7 @@ test_file_prefix(void)
static int
test_memory_flags(void)
{
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char * prefix = "";
#else
@@ -1191,7 +1191,7 @@ test_memory_flags(void)
char invalid_socket_mem[SOCKET_MEM_STRLEN];
char buf[SOCKET_MEM_STRLEN]; /* to avoid copying string onto itself */
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
int i, num_sockets = 1;
#else
int i, num_sockets = RTE_MIN(get_number_of_sockets(),
@@ -1247,7 +1247,7 @@ test_memory_flags(void)
return -1;
}
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* no other tests are applicable to BSD */
return 0;
#endif
diff --git a/app/test/test_eal_fs.c b/app/test/test_eal_fs.c
index 7ca216410..cae624f82 100644
--- a/app/test/test_eal_fs.c
+++ b/app/test/test_eal_fs.c
@@ -22,7 +22,7 @@ test_parse_sysfs_value(void)
unsigned valid_number;
unsigned long retval = 0;
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD doesn't have /proc/pid/fd */
return 0;
#endif
diff --git a/app/test/test_errno.c b/app/test/test_errno.c
index 920a2cf89..7df8192d5 100644
--- a/app/test/test_errno.c
+++ b/app/test/test_errno.c
@@ -18,7 +18,7 @@ test_errno(void)
{
const char *rte_retval;
const char *libc_retval;
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD has a colon in the string, unlike linux */
const char unknown_code_result[] = "Unknown error: %d";
#else
diff --git a/app/test/test_mempool.c b/app/test/test_mempool.c
index eebb1f24d..7738c73db 100644
--- a/app/test/test_mempool.c
+++ b/app/test/test_mempool.c
@@ -116,7 +116,7 @@ test_mempool_basic(struct rte_mempool *mp, int use_external_cache)
MEMPOOL_HEADER_SIZE(mp, mp->cache_size))
GOTO_ERR(ret, out);
-#ifndef RTE_EXEC_ENV_BSDAPP /* rte_mem_virt2iova() not supported on bsd */
+#ifndef RTE_EXEC_ENV_FREEBSD /* rte_mem_virt2iova() not supported on bsd */
printf("get physical address of an object\n");
if (rte_mempool_virt2iova(obj) != rte_mem_virt2iova(obj))
GOTO_ERR(ret, out);
diff --git a/config/common_bsdapp b/config/common_bsdapp
index 3399246ea..e6841f72e 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -4,7 +4,8 @@
#include "common_base"
CONFIG_RTE_EXEC_ENV="bsdapp"
CONFIG_RTE_EXEC_ENV_BSDAPP=y
+CONFIG_RTE_EXEC_ENV_FREEBSD=y
#
# FreeBSD contiguous memory driver settings
diff --git a/config/rte_config.h b/config/rte_config.h
index 9b2e813f0..1690f4d98 100644
--- a/config/rte_config.h
+++ b/config/rte_config.h
@@ -22,6 +22,9 @@
#ifdef RTE_EXEC_ENV_LINUX
#define RTE_EXEC_ENV_LINUXAPP 1
#endif
+#ifdef RTE_EXEC_ENV_FREEBSD
+#define RTE_EXEC_ENV_BSDAPP 1
+#endif
/****** library defines ********/
diff --git a/doc/guides/contributing/design.rst b/doc/guides/contributing/design.rst
index 8779c4bc0..7b18de409 100644
--- a/doc/guides/contributing/design.rst
+++ b/doc/guides/contributing/design.rst
@@ -55,7 +55,7 @@ Per Execution Environment Sources
The following config options can be used:
* ``CONFIG_RTE_EXEC_ENV`` is a string that contains the name of the executive environment.
-* ``CONFIG_RTE_EXEC_ENV_BSDAPP`` or ``CONFIG_RTE_EXEC_ENV_LINUX`` are defined only if we are building for this execution environment.
+* ``CONFIG_RTE_EXEC_ENV_FREEBSD`` or ``CONFIG_RTE_EXEC_ENV_LINUX`` are defined only if we are building for this execution environment.
Library Statistics
------------------
diff --git a/drivers/bus/pci/Makefile b/drivers/bus/pci/Makefile
index 88154b4de..de53ce1bf 100644
--- a/drivers/bus/pci/Makefile
+++ b/drivers/bus/pci/Makefile
@@ -14,7 +14,7 @@ CFLAGS += -DALLOW_EXPERIMENTAL_API
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),)
SYSTEM := linux
endif
-ifneq ($(CONFIG_RTE_EXEC_ENV_BSDAPP),)
+ifneq ($(CONFIG_RTE_EXEC_ENV_FREEBSD),)
SYSTEM := bsd
endif
diff --git a/drivers/bus/vmbus/Makefile b/drivers/bus/vmbus/Makefile
index 3a344fc9c..0d99e715b 100644
--- a/drivers/bus/vmbus/Makefile
+++ b/drivers/bus/vmbus/Makefile
@@ -13,7 +13,7 @@ CFLAGS += -DALLOW_EXPERIMENTAL_API
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),)
SYSTEM := linux
endif
-ifneq ($(CONFIG_RTE_EXEC_ENV_BSDAPP),)
+ifneq ($(CONFIG_RTE_EXEC_ENV_FREEBSD),)
$(error "VMBUS not implemented for BSD yet")
endif
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 0dfea65c2..ca2442aba 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -331,7 +331,7 @@ extern int failsafe_mac_from_arg;
&((struct txq *)((s)->fs_dev->data->tx_queues[i]))->refcnt[(s)->sid] \
)
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
#define FS_THREADID_TYPE void*
#define FS_THREADID_FMT "p"
#else
diff --git a/drivers/net/pcap/rte_eth_pcap.c b/drivers/net/pcap/rte_eth_pcap.c
index 518d9e34a..22aa49c9f 100644
--- a/drivers/net/pcap/rte_eth_pcap.c
+++ b/drivers/net/pcap/rte_eth_pcap.c
@@ -11,7 +11,7 @@
#include <sys/ioctl.h>
#include <unistd.h>
-#if defined(RTE_EXEC_ENV_BSDAPP)
+#if defined(RTE_EXEC_ENV_FREEBSD)
#include <sys/sysctl.h>
#include <net/if_dl.h>
#endif
@@ -1008,7 +1008,7 @@ eth_pcap_update_mac(const char *if_name, struct rte_eth_dev *eth_dev,
return 0;
-#elif defined(RTE_EXEC_ENV_BSDAPP)
+#elif defined(RTE_EXEC_ENV_FREEBSD)
void *mac_addrs;
struct if_msghdr *ifm;
struct sockaddr_dl *sdl;
diff --git a/kernel/Makefile b/kernel/Makefile
index 6716b566c..5d51fd94b 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -4,6 +4,6 @@
include $(RTE_SDK)/mk/rte.vars.mk
DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += linux
-DIRS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += freebsd
+DIRS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += freebsd
include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/kernel/freebsd/Makefile b/kernel/freebsd/Makefile
index c93d7a624..522d3f68f 100644
--- a/kernel/freebsd/Makefile
+++ b/kernel/freebsd/Makefile
@@ -3,7 +3,7 @@
include $(RTE_SDK)/mk/rte.vars.mk
-DIRS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += contigmem
-DIRS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += nic_uio
+DIRS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += contigmem
+DIRS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += nic_uio
include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/lib/librte_eal/Makefile b/lib/librte_eal/Makefile
index 8b773da70..86434f5b3 100644
--- a/lib/librte_eal/Makefile
+++ b/lib/librte_eal/Makefile
@@ -6,7 +6,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
DIRS-y += common
DIRS-$(CONFIG_RTE_EXEC_ENV_LINUX) += linux
DEPDIRS-linux := common
-DIRS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += freebsd
+DIRS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += freebsd
DEPDIRS-freebsd := common
include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/lib/librte_eal/common/eal_common_errno.c b/lib/librte_eal/common/eal_common_errno.c
index c63a943b3..2a10fb823 100644
--- a/lib/librte_eal/common/eal_common_errno.c
+++ b/lib/librte_eal/common/eal_common_errno.c
@@ -21,7 +21,7 @@ const char *
rte_strerror(int errnum)
{
/* BSD puts a colon in the "unknown error" messages, Linux doesn't */
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
static const char *sep = ":";
#else
static const char *sep = "";
diff --git a/lib/librte_eal/common/include/generic/rte_byteorder.h b/lib/librte_eal/common/include/generic/rte_byteorder.h
index 7d9a1463c..38e8cfd32 100644
--- a/lib/librte_eal/common/include/generic/rte_byteorder.h
+++ b/lib/librte_eal/common/include/generic/rte_byteorder.h
@@ -15,7 +15,7 @@
*/
#include <stdint.h>
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
#include <sys/endian.h>
#else
#include <endian.h>
diff --git a/lib/librte_eal/common/include/rte_string_fns.h b/lib/librte_eal/common/include/rte_string_fns.h
index 35c6b003c..85bfe6c9a 100644
--- a/lib/librte_eal/common/include/rte_string_fns.h
+++ b/lib/librte_eal/common/include/rte_string_fns.h
@@ -74,7 +74,7 @@ rte_strlcat(char *dst, const char *src, size_t size)
}
/* pull in a strlcpy function */
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
#ifndef __BSD_VISIBLE /* non-standard functions are hidden */
#define strlcpy(dst, src, size) rte_strlcpy(dst, src, size)
#define strlcat(dst, src, size) rte_strlcat(dst, src, size)
@@ -89,7 +89,7 @@ rte_strlcat(char *dst, const char *src, size_t size)
#define strlcat(dst, src, size) rte_strlcat(dst, src, size)
#endif /* RTE_USE_LIBBSD */
-#endif /* BSDAPP */
+#endif /* FREEBSD */
/**
* Copy string src to buffer dst of size dsize.
diff --git a/lib/librte_eal/freebsd/Makefile b/lib/librte_eal/freebsd/Makefile
index 5b06b216a..fc42058b6 100644
--- a/lib/librte_eal/freebsd/Makefile
+++ b/lib/librte_eal/freebsd/Makefile
@@ -3,6 +3,6 @@
include $(RTE_SDK)/mk/rte.vars.mk
-DIRS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal
+DIRS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal
include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/lib/librte_eal/freebsd/eal/Makefile b/lib/librte_eal/freebsd/eal/Makefile
index bfeddaadc..aa4b9ef8e 100644
--- a/lib/librte_eal/freebsd/eal/Makefile
+++ b/lib/librte_eal/freebsd/eal/Makefile
@@ -25,55 +25,55 @@ EXPORT_MAP := ../../rte_eal_version.map
LIBABIVER := 9
# specific to bsdapp exec-env
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) := eal.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_cpuflags.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_memory.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_hugepage_info.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_thread.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_debug.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_memalloc.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_lcore.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_timer.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_interrupts.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_alarm.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_dev.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) := eal.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_cpuflags.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_memory.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_hugepage_info.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_thread.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_debug.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_memalloc.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_lcore.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_timer.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_interrupts.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_alarm.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_dev.c
# from common dir
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_lcore.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_timer.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_memzone.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_log.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_launch.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_memalloc.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_memory.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_tailqs.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_errno.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_cpuflags.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_hypervisor.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_string_fns.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_hexdump.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_devargs.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_class.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_bus.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_dev.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_options.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_thread.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_proc.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_fbarray.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_uuid.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += rte_malloc.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += hotplug_mp.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += malloc_elem.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += malloc_heap.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += malloc_mp.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += rte_keepalive.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += rte_option.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += rte_service.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += rte_reciprocal.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_lcore.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_timer.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_memzone.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_log.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_launch.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_memalloc.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_memory.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_tailqs.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_errno.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_cpuflags.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_hypervisor.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_string_fns.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_hexdump.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_devargs.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_class.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_bus.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_dev.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_options.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_thread.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_proc.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_fbarray.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_common_uuid.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += rte_malloc.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += hotplug_mp.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += malloc_elem.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += malloc_heap.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += malloc_mp.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += rte_keepalive.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += rte_option.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += rte_service.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += rte_reciprocal.c
# from arch dir
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += rte_cpuflags.c
-SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += rte_hypervisor.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += rte_cpuflags.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += rte_hypervisor.c
SRCS-$(CONFIG_RTE_ARCH_X86) += rte_spinlock.c
SRCS-y += rte_cycles.c
@@ -88,7 +88,7 @@ endif
INC := # no bsdapp specific headers
-SYMLINK-$(CONFIG_RTE_EXEC_ENV_BSDAPP)-include/exec-env := \
+SYMLINK-$(CONFIG_RTE_EXEC_ENV_FREEBSD)-include/exec-env := \
$(addprefix include/exec-env/,$(INC))
include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_eal/meson.build b/lib/librte_eal/meson.build
index 61b1016af..c592c6747 100644
--- a/lib/librte_eal/meson.build
+++ b/lib/librte_eal/meson.build
@@ -14,7 +14,7 @@ if host_machine.system() == 'linux'
subdir('linux/eal')
elif host_machine.system() == 'freebsd'
- dpdk_conf.set('RTE_EXEC_ENV_BSDAPP', 1)
+ dpdk_conf.set('RTE_EXEC_ENV_FREEBSD', 1)
subdir('freebsd/eal')
else
--
2.20.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [dpdk-dev] [PATCH 5/6] build/meson: change linuxapp to linux in meson cross files
2019-03-06 16:22 [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names Bruce Richardson
` (3 preceding siblings ...)
2019-03-06 16:22 ` [dpdk-dev] [PATCH 4/6] build/freebsd: rename macro from BSDPAPP to FREEBSD Bruce Richardson
@ 2019-03-06 16:22 ` Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 6/6] build: allow linux and freebsd in build configs Bruce Richardson
` (2 subsequent siblings)
7 siblings, 0 replies; 17+ messages in thread
From: Bruce Richardson @ 2019-03-06 16:22 UTC (permalink / raw)
To: dev; +Cc: Bruce Richardson
Rename the cross files for meson compilation from having linuxapp
in the name to just linux in the name.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
.../arm/{arm64_armv8_linuxapp_gcc => arm64_armv8_linux_gcc} | 0
.../arm/{arm64_dpaa2_linuxapp_gcc => arm64_dpaa2_linux_gcc} | 0
config/arm/{arm64_dpaa_linuxapp_gcc => arm64_dpaa_linux_gcc} | 0
.../{arm64_thunderx_linuxapp_gcc => arm64_thunderx_linux_gcc} | 0
devtools/test-meson-builds.sh | 2 +-
doc/build-sdk-meson.txt | 4 ++--
6 files changed, 3 insertions(+), 3 deletions(-)
rename config/arm/{arm64_armv8_linuxapp_gcc => arm64_armv8_linux_gcc} (100%)
rename config/arm/{arm64_dpaa2_linuxapp_gcc => arm64_dpaa2_linux_gcc} (100%)
rename config/arm/{arm64_dpaa_linuxapp_gcc => arm64_dpaa_linux_gcc} (100%)
rename config/arm/{arm64_thunderx_linuxapp_gcc => arm64_thunderx_linux_gcc} (100%)
diff --git a/config/arm/arm64_armv8_linuxapp_gcc b/config/arm/arm64_armv8_linux_gcc
similarity index 100%
rename from config/arm/arm64_armv8_linuxapp_gcc
rename to config/arm/arm64_armv8_linux_gcc
diff --git a/config/arm/arm64_dpaa2_linuxapp_gcc b/config/arm/arm64_dpaa2_linux_gcc
similarity index 100%
rename from config/arm/arm64_dpaa2_linuxapp_gcc
rename to config/arm/arm64_dpaa2_linux_gcc
diff --git a/config/arm/arm64_dpaa_linuxapp_gcc b/config/arm/arm64_dpaa_linux_gcc
similarity index 100%
rename from config/arm/arm64_dpaa_linuxapp_gcc
rename to config/arm/arm64_dpaa_linux_gcc
diff --git a/config/arm/arm64_thunderx_linuxapp_gcc b/config/arm/arm64_thunderx_linux_gcc
similarity index 100%
rename from config/arm/arm64_thunderx_linuxapp_gcc
rename to config/arm/arm64_thunderx_linux_gcc
diff --git a/devtools/test-meson-builds.sh b/devtools/test-meson-builds.sh
index e59474d53..f81a71434 100755
--- a/devtools/test-meson-builds.sh
+++ b/devtools/test-meson-builds.sh
@@ -51,7 +51,7 @@ if command -v $c >/dev/null 2>&1 ; then
# compile the general v8a also for clang to increase coverage
export CC="ccache clang"
build build-arm64-host-clang $use_shared \
- --cross-file config/arm/arm64_armv8_linuxapp_gcc
+ --cross-file config/arm/arm64_armv8_linux_gcc
for f in config/arm/arm*gcc ; do
export CC="ccache gcc"
diff --git a/doc/build-sdk-meson.txt b/doc/build-sdk-meson.txt
index 0a3316386..912cb3a8c 100644
--- a/doc/build-sdk-meson.txt
+++ b/doc/build-sdk-meson.txt
@@ -157,9 +157,9 @@ command::
For example if the target machine is arm64 we can use the following
command::
- meson arm-build --cross-file config/arm/arm64_armv8_linuxapp_gcc
+ meson arm-build --cross-file config/arm/arm64_armv8_linux_gcc
-where config/arm/arm64_armv8_linuxapp_gcc contains the following
+where config/arm/arm64_armv8_linux_gcc contains the following
parameters::
[binaries]
--
2.20.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [dpdk-dev] [PATCH 6/6] build: allow linux and freebsd in build configs
2019-03-06 16:22 [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names Bruce Richardson
` (4 preceding siblings ...)
2019-03-06 16:22 ` [dpdk-dev] [PATCH 5/6] build/meson: change linuxapp to linux in meson cross files Bruce Richardson
@ 2019-03-06 16:22 ` Bruce Richardson
2019-03-09 0:57 ` [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names Thomas Monjalon
2019-03-12 22:13 ` Thomas Monjalon
7 siblings, 0 replies; 17+ messages in thread
From: Bruce Richardson @ 2019-03-06 16:22 UTC (permalink / raw)
To: dev; +Cc: Bruce Richardson
Rather than using linuxapp and bsdapp everywhere, we can change things to
use the, more readable, terms "linux" and "freebsd" in our build configs.
Rather than renaming the configs we can just duplicate the existing ones
with the new names using symlinks, and use the new names exclusively
internally. ["make showconfigs" also only shows the new names to keep the
list short] The result is that backward compatibility is kept fully but any
new builds or development can be done using the newer names, i.e. both
"make config T=x86_64-native-linuxapp-gcc" and "T=x86_64-native-linux-gcc"
work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
app/test-bbdev/test-bbdev.py | 2 +-
app/test/autotest.py | 2 +-
app/test/test.c | 2 +-
...on_armv8a_linuxapp => common_armv8a_linux} | 2 +-
config/{common_bsdapp => common_freebsd} | 0
config/{common_linuxapp => common_linux} | 0
config/defconfig_arm-armv7a-linux-gcc | 1 +
config/defconfig_arm-armv7a-linuxapp-gcc | 2 +-
config/defconfig_arm64-armv8a-linux-clang | 1 +
config/defconfig_arm64-armv8a-linux-gcc | 1 +
config/defconfig_arm64-armv8a-linuxapp-clang | 2 +-
config/defconfig_arm64-armv8a-linuxapp-gcc | 2 +-
config/defconfig_arm64-bluefield-linux-gcc | 1 +
config/defconfig_arm64-bluefield-linuxapp-gcc | 2 +-
config/defconfig_arm64-dpaa-linux-gcc | 1 +
config/defconfig_arm64-dpaa-linuxapp-gcc | 2 +-
config/defconfig_arm64-dpaa2-linux-gcc | 1 +
config/defconfig_arm64-dpaa2-linuxapp-gcc | 2 +-
config/defconfig_arm64-stingray-linux-gcc | 1 +
config/defconfig_arm64-stingray-linuxapp-gcc | 2 +-
config/defconfig_arm64-thunderx-linux-gcc | 1 +
config/defconfig_arm64-thunderx-linuxapp-gcc | 2 +-
config/defconfig_arm64-xgene1-linux-gcc | 1 +
config/defconfig_arm64-xgene1-linuxapp-gcc | 2 +-
config/defconfig_i686-native-linux-gcc | 1 +
config/defconfig_i686-native-linux-icc | 1 +
config/defconfig_i686-native-linuxapp-gcc | 2 +-
config/defconfig_i686-native-linuxapp-icc | 2 +-
config/defconfig_ppc_64-power8-linux-gcc | 1 +
config/defconfig_ppc_64-power8-linuxapp-gcc | 2 +-
config/defconfig_x86_64-native-bsdapp-clang | 2 +-
config/defconfig_x86_64-native-bsdapp-gcc | 2 +-
config/defconfig_x86_64-native-freebsd-clang | 1 +
config/defconfig_x86_64-native-freebsd-gcc | 1 +
config/defconfig_x86_64-native-linux-clang | 1 +
config/defconfig_x86_64-native-linux-gcc | 1 +
config/defconfig_x86_64-native-linux-icc | 1 +
config/defconfig_x86_64-native-linuxapp-clang | 2 +-
config/defconfig_x86_64-native-linuxapp-gcc | 2 +-
config/defconfig_x86_64-native-linuxapp-icc | 2 +-
config/defconfig_x86_x32-native-linux-gcc | 1 +
config/defconfig_x86_x32-native-linuxapp-gcc | 2 +-
devtools/build-tags.sh | 8 ++---
devtools/test-build.sh | 2 +-
devtools/validate-abi.sh | 2 +-
doc/build-sdk-quick.txt | 2 +-
doc/guides/compressdevs/octeontx.rst | 4 +--
doc/guides/contributing/design.rst | 6 ++--
doc/guides/contributing/patches.rst | 14 ++++----
doc/guides/contributing/versioning.rst | 6 ++--
doc/guides/cryptodevs/armv8.rst | 2 +-
doc/guides/cryptodevs/caam_jr.rst | 6 ++--
doc/guides/cryptodevs/dpaa2_sec.rst | 2 +-
doc/guides/cryptodevs/dpaa_sec.rst | 2 +-
doc/guides/cryptodevs/openssl.rst | 2 +-
doc/guides/cryptodevs/virtio.rst | 8 ++---
doc/guides/cryptodevs/zuc.rst | 2 +-
doc/guides/eventdevs/dpaa.rst | 2 +-
doc/guides/eventdevs/dpaa2.rst | 2 +-
doc/guides/eventdevs/octeontx.rst | 2 +-
doc/guides/freebsd_gsg/build_dpdk.rst | 6 ++--
doc/guides/freebsd_gsg/build_sample_apps.rst | 10 +++---
doc/guides/freebsd_gsg/install_from_ports.rst | 4 +--
doc/guides/freebsd_gsg/intro.rst | 4 +--
doc/guides/howto/lm_bond_virtio_sriov.rst | 4 +--
doc/guides/howto/lm_virtio_vhost_user.rst | 4 +--
doc/guides/howto/pvp_reference_benchmark.rst | 4 +--
.../virtio_user_for_container_networking.rst | 4 +--
doc/guides/linux_gsg/build_dpdk.rst | 10 +++---
doc/guides/linux_gsg/build_sample_apps.rst | 6 ++--
.../linux_gsg/cross_build_dpdk_for_arm64.rst | 6 ++--
doc/guides/linux_gsg/intro.rst | 4 +--
.../linux_gsg/nic_perf_intel_platform.rst | 2 +-
doc/guides/linux_gsg/quick_start.rst | 26 +++++++-------
doc/guides/mempool/octeontx.rst | 2 +-
doc/guides/nics/build_and_test.rst | 34 +++++++++----------
doc/guides/nics/cxgbe.rst | 6 ++--
doc/guides/nics/dpaa.rst | 2 +-
doc/guides/nics/enic.rst | 2 +-
doc/guides/nics/intel_vf.rst | 10 +++---
doc/guides/nics/mlx5.rst | 2 +-
doc/guides/nics/mvneta.rst | 2 +-
doc/guides/nics/mvpp2.rst | 4 +--
doc/guides/nics/nfp.rst | 2 +-
doc/guides/nics/octeontx.rst | 4 +--
doc/guides/nics/softnic.rst | 4 +--
doc/guides/nics/tap.rst | 2 +-
doc/guides/nics/thunderx.rst | 4 +--
doc/guides/platform/octeontx.rst | 6 ++--
doc/guides/prog_guide/build_app.rst | 4 +--
.../prog_guide/dev_kit_build_system.rst | 8 ++---
.../prog_guide/dev_kit_root_make_help.rst | 6 ++--
.../prog_guide/env_abstraction_layer.rst | 6 ++--
.../prog_guide/ext_app_lib_make_help.rst | 4 +--
doc/guides/prog_guide/extend_dpdk.rst | 4 +--
doc/guides/prog_guide/glossary.rst | 2 +-
doc/guides/prog_guide/img/linuxapp_launch.svg | 4 +--
doc/guides/prog_guide/intro.rst | 2 +-
doc/guides/prog_guide/overview.rst | 2 +-
doc/guides/prog_guide/profile_app.rst | 2 +-
doc/guides/prog_guide/qos_framework.rst | 2 +-
doc/guides/rawdevs/dpaa2_cmdif.rst | 2 +-
doc/guides/rawdevs/dpaa2_qdma.rst | 2 +-
doc/guides/rel_notes/release_19_02.rst | 2 +-
doc/guides/rel_notes/release_2_1.rst | 2 +-
doc/guides/sample_app_ug/bbdev_app.rst | 6 ++--
doc/guides/sample_app_ug/cmd_line.rst | 2 +-
doc/guides/sample_app_ug/dist_app.rst | 2 +-
doc/guides/sample_app_ug/fips_validation.rst | 4 +--
doc/guides/sample_app_ug/flow_classify.rst | 2 +-
doc/guides/sample_app_ug/flow_filtering.rst | 4 +--
doc/guides/sample_app_ug/hello_world.rst | 4 +--
doc/guides/sample_app_ug/ip_frag.rst | 4 +--
doc/guides/sample_app_ug/ip_reassembly.rst | 4 +--
doc/guides/sample_app_ug/keep_alive.rst | 2 +-
.../sample_app_ug/kernel_nic_interface.rst | 2 +-
doc/guides/sample_app_ug/l2_forward_cat.rst | 2 +-
.../sample_app_ug/l2_forward_crypto.rst | 2 +-
.../sample_app_ug/l2_forward_job_stats.rst | 2 +-
.../sample_app_ug/l2_forward_real_virtual.rst | 2 +-
doc/guides/sample_app_ug/link_status_intr.rst | 2 +-
.../sample_app_ug/netmap_compatibility.rst | 2 +-
.../sample_app_ug/performance_thread.rst | 2 +-
doc/guides/sample_app_ug/ptpclient.rst | 4 +--
doc/guides/sample_app_ug/qos_scheduler.rst | 2 +-
doc/guides/sample_app_ug/quota_watermark.rst | 4 +--
doc/guides/sample_app_ug/rxtx_callbacks.rst | 2 +-
doc/guides/sample_app_ug/service_cores.rst | 2 +-
doc/guides/sample_app_ug/skeleton.rst | 2 +-
doc/guides/sample_app_ug/tep_termination.rst | 2 +-
doc/guides/sample_app_ug/timer.rst | 2 +-
.../sample_app_ug/vmdq_dcb_forwarding.rst | 4 +--
doc/guides/testpmd_app_ug/build_app.rst | 2 +-
doc/guides/tools/testbbdev.rst | 8 ++---
drivers/net/softnic/Makefile | 2 +-
examples/Makefile | 2 +-
examples/bbdev_app/Makefile | 2 +-
examples/bond/Makefile | 2 +-
examples/cmdline/Makefile | 2 +-
examples/distributor/Makefile | 2 +-
examples/ethtool/Makefile | 4 +--
examples/ethtool/ethtool-app/Makefile | 2 +-
examples/ethtool/lib/Makefile | 4 +--
examples/eventdev_pipeline/Makefile | 2 +-
examples/exception_path/Makefile | 2 +-
examples/fips_validation/Makefile | 2 +-
examples/flow_classify/Makefile | 2 +-
examples/flow_filtering/Makefile | 2 +-
examples/helloworld/Makefile | 2 +-
examples/ip_fragmentation/Makefile | 2 +-
examples/ip_pipeline/Makefile | 4 +--
examples/ip_reassembly/Makefile | 2 +-
examples/ipsec-secgw/Makefile | 2 +-
examples/ipsec-secgw/test/common_defs.sh | 2 +-
examples/ipv4_multicast/Makefile | 2 +-
examples/kni/Makefile | 4 +--
examples/l2fwd-cat/Makefile | 2 +-
examples/l2fwd-crypto/Makefile | 2 +-
examples/l2fwd-jobstats/Makefile | 2 +-
examples/l2fwd-keepalive/Makefile | 2 +-
examples/l2fwd-keepalive/ka-agent/Makefile | 2 +-
examples/l2fwd/Makefile | 2 +-
examples/l3fwd-acl/Makefile | 2 +-
examples/l3fwd-power/Makefile | 4 +--
examples/l3fwd-vf/Makefile | 2 +-
examples/l3fwd/Makefile | 2 +-
examples/link_status_interrupt/Makefile | 2 +-
examples/load_balancer/Makefile | 2 +-
examples/multi_process/Makefile | 2 +-
.../multi_process/client_server_mp/Makefile | 2 +-
.../client_server_mp/mp_server/Makefile | 4 +--
examples/multi_process/hotplug_mp/Makefile | 2 +-
examples/multi_process/simple_mp/Makefile | 2 +-
examples/multi_process/symmetric_mp/Makefile | 2 +-
examples/netmap_compat/Makefile | 2 +-
examples/netmap_compat/bridge/Makefile | 4 +--
examples/packet_ordering/Makefile | 2 +-
examples/performance-thread/Makefile | 2 +-
.../performance-thread/l3fwd-thread/Makefile | 2 +-
.../performance-thread/pthread_shim/Makefile | 2 +-
examples/ptpclient/Makefile | 2 +-
examples/qos_meter/Makefile | 2 +-
examples/qos_sched/Makefile | 4 +--
examples/quota_watermark/Makefile | 2 +-
examples/quota_watermark/qw/Makefile | 2 +-
examples/quota_watermark/qwctl/Makefile | 2 +-
examples/rxtx_callbacks/Makefile | 2 +-
examples/server_node_efd/Makefile | 2 +-
examples/server_node_efd/server/Makefile | 4 +--
examples/service_cores/Makefile | 2 +-
examples/skeleton/Makefile | 2 +-
examples/tep_termination/Makefile | 4 +--
examples/timer/Makefile | 2 +-
examples/vdpa/Makefile | 4 +--
examples/vhost/Makefile | 4 +--
examples/vhost_crypto/Makefile | 4 +--
examples/vhost_scsi/Makefile | 4 +--
examples/vm_power_manager/Makefile | 2 +-
examples/vm_power_manager/guest_cli/Makefile | 2 +-
examples/vmdq/Makefile | 2 +-
examples/vmdq_dcb/Makefile | 2 +-
lib/librte_eal/common/include/rte_debug.h | 2 +-
lib/librte_eal/common/include/rte_eal.h | 2 +-
lib/librte_eal/freebsd/eal/Makefile | 4 +--
lib/librte_eal/linux/eal/Makefile | 2 +-
mk/exec-env/bsdapp | 1 +
mk/exec-env/{bsdapp => freebsd}/rte.app.mk | 0
mk/exec-env/{bsdapp => freebsd}/rte.vars.mk | 2 +-
mk/exec-env/{linuxapp => linux}/rte.app.mk | 0
mk/exec-env/{linuxapp => linux}/rte.vars.mk | 2 +-
mk/exec-env/linuxapp | 1 +
mk/rte.sdkconfig.mk | 9 ++---
mk/rte.sdkinstall.mk | 3 ++
mk/rte.sdkroot.mk | 2 +-
usertools/dpdk-setup.sh | 4 +--
215 files changed, 337 insertions(+), 313 deletions(-)
rename config/{common_armv8a_linuxapp => common_armv8a_linux} (97%)
rename config/{common_bsdapp => common_freebsd} (100%)
rename config/{common_linuxapp => common_linux} (100%)
create mode 120000 config/defconfig_arm-armv7a-linux-gcc
create mode 120000 config/defconfig_arm64-armv8a-linux-clang
create mode 120000 config/defconfig_arm64-armv8a-linux-gcc
create mode 120000 config/defconfig_arm64-bluefield-linux-gcc
create mode 120000 config/defconfig_arm64-dpaa-linux-gcc
create mode 120000 config/defconfig_arm64-dpaa2-linux-gcc
create mode 120000 config/defconfig_arm64-stingray-linux-gcc
create mode 120000 config/defconfig_arm64-thunderx-linux-gcc
create mode 120000 config/defconfig_arm64-xgene1-linux-gcc
create mode 120000 config/defconfig_i686-native-linux-gcc
create mode 120000 config/defconfig_i686-native-linux-icc
create mode 120000 config/defconfig_ppc_64-power8-linux-gcc
create mode 120000 config/defconfig_x86_64-native-freebsd-clang
create mode 120000 config/defconfig_x86_64-native-freebsd-gcc
create mode 120000 config/defconfig_x86_64-native-linux-clang
create mode 120000 config/defconfig_x86_64-native-linux-gcc
create mode 120000 config/defconfig_x86_64-native-linux-icc
create mode 120000 config/defconfig_x86_x32-native-linux-gcc
create mode 120000 mk/exec-env/bsdapp
rename mk/exec-env/{bsdapp => freebsd}/rte.app.mk (100%)
rename mk/exec-env/{bsdapp => freebsd}/rte.vars.mk (94%)
rename mk/exec-env/{linuxapp => linux}/rte.app.mk (100%)
rename mk/exec-env/{linuxapp => linux}/rte.vars.mk (95%)
create mode 120000 mk/exec-env/linuxapp
diff --git a/app/test-bbdev/test-bbdev.py b/app/test-bbdev/test-bbdev.py
index acab9eb16..25340ec8e 100755
--- a/app/test-bbdev/test-bbdev.py
+++ b/app/test-bbdev/test-bbdev.py
@@ -23,7 +23,7 @@ def kill(process):
if "RTE_TARGET" in os.environ:
dpdk_target = os.environ["RTE_TARGET"]
else:
- dpdk_target = "x86_64-native-linuxapp-gcc"
+ dpdk_target = "x86_64-native-linux-gcc"
parser = argparse.ArgumentParser(
description='BBdev Unit Test Application',
diff --git a/app/test/autotest.py b/app/test/autotest.py
index 12997fdf0..46c469eee 100644
--- a/app/test/autotest.py
+++ b/app/test/autotest.py
@@ -38,7 +38,7 @@ def usage():
# how many workers to run tests with. FreeBSD doesn't support multiple primary
# processes, so make it 1, otherwise make it 4. ignored for non-parallel tests
-n_processes = 1 if "bsdapp" in target else 4
+n_processes = 1 if "bsd" in target else 4
runner = autotest_runner.AutotestRunner(cmdline, target, test_blacklist,
test_whitelist, n_processes)
diff --git a/app/test/test.c b/app/test/test.c
index 351c7f275..d646f5160 100644
--- a/app/test/test.c
+++ b/app/test/test.c
@@ -36,7 +36,7 @@ extern cmdline_parse_ctx_t main_ctx[];
const char *prgname; /* to be set to argv[0] */
-static const char *recursive_call; /* used in linuxapp for MP and other tests */
+static const char *recursive_call; /* used in linux for MP and other tests */
static int
no_action(void){ return 0; }
diff --git a/config/common_armv8a_linuxapp b/config/common_armv8a_linux
similarity index 97%
rename from config/common_armv8a_linuxapp
rename to config/common_armv8a_linux
index ad88a37b1..72091de1c 100644
--- a/config/common_armv8a_linuxapp
+++ b/config/common_armv8a_linux
@@ -2,7 +2,7 @@
# Copyright(c) 2017 Cavium, Inc
#
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="armv8a"
diff --git a/config/common_bsdapp b/config/common_freebsd
similarity index 100%
rename from config/common_bsdapp
rename to config/common_freebsd
diff --git a/config/common_linuxapp b/config/common_linux
similarity index 100%
rename from config/common_linuxapp
rename to config/common_linux
diff --git a/config/defconfig_arm-armv7a-linux-gcc b/config/defconfig_arm-armv7a-linux-gcc
new file mode 120000
index 000000000..84619de43
--- /dev/null
+++ b/config/defconfig_arm-armv7a-linux-gcc
@@ -0,0 +1 @@
+defconfig_arm-armv7a-linuxapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
index 63f3a507b..c9509b274 100644
--- a/config/defconfig_arm-armv7a-linuxapp-gcc
+++ b/config/defconfig_arm-armv7a-linuxapp-gcc
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright (C) 2015 RehiveTech. All right reserved.
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="armv7a"
diff --git a/config/defconfig_arm64-armv8a-linux-clang b/config/defconfig_arm64-armv8a-linux-clang
new file mode 120000
index 000000000..196808b98
--- /dev/null
+++ b/config/defconfig_arm64-armv8a-linux-clang
@@ -0,0 +1 @@
+defconfig_arm64-armv8a-linuxapp-clang
\ No newline at end of file
diff --git a/config/defconfig_arm64-armv8a-linux-gcc b/config/defconfig_arm64-armv8a-linux-gcc
new file mode 120000
index 000000000..094951956
--- /dev/null
+++ b/config/defconfig_arm64-armv8a-linux-gcc
@@ -0,0 +1 @@
+defconfig_arm64-armv8a-linuxapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_arm64-armv8a-linuxapp-clang b/config/defconfig_arm64-armv8a-linuxapp-clang
index 487714ea0..d3b4dad53 100644
--- a/config/defconfig_arm64-armv8a-linuxapp-clang
+++ b/config/defconfig_arm64-armv8a-linuxapp-clang
@@ -2,7 +2,7 @@
# Copyright(c) 2017 Cavium, Inc
#
-#include "common_armv8a_linuxapp"
+#include "common_armv8a_linux"
CONFIG_RTE_TOOLCHAIN="clang"
CONFIG_RTE_TOOLCHAIN_CLANG=y
diff --git a/config/defconfig_arm64-armv8a-linuxapp-gcc b/config/defconfig_arm64-armv8a-linuxapp-gcc
index a6ed90c51..58c4a4029 100644
--- a/config/defconfig_arm64-armv8a-linuxapp-gcc
+++ b/config/defconfig_arm64-armv8a-linuxapp-gcc
@@ -2,7 +2,7 @@
# Copyright(c) 2015 Cavium, Inc
#
-#include "common_armv8a_linuxapp"
+#include "common_armv8a_linux"
CONFIG_RTE_TOOLCHAIN="gcc"
CONFIG_RTE_TOOLCHAIN_GCC=y
diff --git a/config/defconfig_arm64-bluefield-linux-gcc b/config/defconfig_arm64-bluefield-linux-gcc
new file mode 120000
index 000000000..dad37d5e7
--- /dev/null
+++ b/config/defconfig_arm64-bluefield-linux-gcc
@@ -0,0 +1 @@
+defconfig_arm64-bluefield-linuxapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_arm64-bluefield-linuxapp-gcc b/config/defconfig_arm64-bluefield-linuxapp-gcc
index dd252c0e4..b49653881 100644
--- a/config/defconfig_arm64-bluefield-linuxapp-gcc
+++ b/config/defconfig_arm64-bluefield-linuxapp-gcc
@@ -2,7 +2,7 @@
# Copyright 2019 Mellanox Technologies, Ltd
#
-#include "defconfig_arm64-armv8a-linuxapp-gcc"
+#include "defconfig_arm64-armv8a-linux-gcc"
# Mellanox BlueField
CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72"
diff --git a/config/defconfig_arm64-dpaa-linux-gcc b/config/defconfig_arm64-dpaa-linux-gcc
new file mode 120000
index 000000000..dc05caacf
--- /dev/null
+++ b/config/defconfig_arm64-dpaa-linux-gcc
@@ -0,0 +1 @@
+defconfig_arm64-dpaa-linuxapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_arm64-dpaa-linuxapp-gcc b/config/defconfig_arm64-dpaa-linuxapp-gcc
index 544b6770d..b408d4f48 100644
--- a/config/defconfig_arm64-dpaa-linuxapp-gcc
+++ b/config/defconfig_arm64-dpaa-linuxapp-gcc
@@ -2,7 +2,7 @@
# Copyright 2016 Freescale Semiconductor, Inc.
# Copyright 2017 NXP
-#include "defconfig_arm64-armv8a-linuxapp-gcc"
+#include "defconfig_arm64-armv8a-linux-gcc"
# NXP (Freescale) - Soc Architecture with FMAN, QMAN & BMAN support
CONFIG_RTE_MACHINE="dpaa"
diff --git a/config/defconfig_arm64-dpaa2-linux-gcc b/config/defconfig_arm64-dpaa2-linux-gcc
new file mode 120000
index 000000000..9a6c6c4cb
--- /dev/null
+++ b/config/defconfig_arm64-dpaa2-linux-gcc
@@ -0,0 +1 @@
+defconfig_arm64-dpaa2-linuxapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc b/config/defconfig_arm64-dpaa2-linuxapp-gcc
index 96f478a06..8b545f5f7 100644
--- a/config/defconfig_arm64-dpaa2-linuxapp-gcc
+++ b/config/defconfig_arm64-dpaa2-linuxapp-gcc
@@ -3,7 +3,7 @@
# Copyright 2016 NXP
#
-#include "defconfig_arm64-armv8a-linuxapp-gcc"
+#include "defconfig_arm64-armv8a-linux-gcc"
# NXP (Freescale) - Soc Architecture with WRIOP and QBMAN support
CONFIG_RTE_MACHINE="dpaa2"
diff --git a/config/defconfig_arm64-stingray-linux-gcc b/config/defconfig_arm64-stingray-linux-gcc
new file mode 120000
index 000000000..829dd65f0
--- /dev/null
+++ b/config/defconfig_arm64-stingray-linux-gcc
@@ -0,0 +1 @@
+defconfig_arm64-stingray-linuxapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_arm64-stingray-linuxapp-gcc b/config/defconfig_arm64-stingray-linuxapp-gcc
index 999250723..7b33aa7af 100644
--- a/config/defconfig_arm64-stingray-linuxapp-gcc
+++ b/config/defconfig_arm64-stingray-linuxapp-gcc
@@ -2,7 +2,7 @@
# Copyright (C) Broadcom 2017-2018. All rights reserved.
#
-#include "defconfig_arm64-armv8a-linuxapp-gcc"
+#include "defconfig_arm64-armv8a-linux-gcc"
# Broadcom - Stingray
CONFIG_RTE_MACHINE="armv8a"
diff --git a/config/defconfig_arm64-thunderx-linux-gcc b/config/defconfig_arm64-thunderx-linux-gcc
new file mode 120000
index 000000000..1b9c4ad21
--- /dev/null
+++ b/config/defconfig_arm64-thunderx-linux-gcc
@@ -0,0 +1 @@
+defconfig_arm64-thunderx-linuxapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_arm64-thunderx-linuxapp-gcc b/config/defconfig_arm64-thunderx-linuxapp-gcc
index fd160aa04..a52f06651 100644
--- a/config/defconfig_arm64-thunderx-linuxapp-gcc
+++ b/config/defconfig_arm64-thunderx-linuxapp-gcc
@@ -2,7 +2,7 @@
# Copyright(c) 2015 Cavium, Inc
#
-#include "defconfig_arm64-armv8a-linuxapp-gcc"
+#include "defconfig_arm64-armv8a-linux-gcc"
CONFIG_RTE_MACHINE="thunderx"
diff --git a/config/defconfig_arm64-xgene1-linux-gcc b/config/defconfig_arm64-xgene1-linux-gcc
new file mode 120000
index 000000000..d5e8b5e55
--- /dev/null
+++ b/config/defconfig_arm64-xgene1-linux-gcc
@@ -0,0 +1 @@
+defconfig_arm64-xgene1-linuxapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_arm64-xgene1-linuxapp-gcc b/config/defconfig_arm64-xgene1-linuxapp-gcc
index a2dd465b7..fbf576c4a 100644
--- a/config/defconfig_arm64-xgene1-linuxapp-gcc
+++ b/config/defconfig_arm64-xgene1-linuxapp-gcc
@@ -2,7 +2,7 @@
# Copyright(c) 2015 Cavium, Inc
#
-#include "defconfig_arm64-armv8a-linuxapp-gcc"
+#include "defconfig_arm64-armv8a-linux-gcc"
CONFIG_RTE_MACHINE="xgene1"
CONFIG_RTE_CACHE_LINE_SIZE=64
diff --git a/config/defconfig_i686-native-linux-gcc b/config/defconfig_i686-native-linux-gcc
new file mode 120000
index 000000000..927141d5d
--- /dev/null
+++ b/config/defconfig_i686-native-linux-gcc
@@ -0,0 +1 @@
+defconfig_i686-native-linuxapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_i686-native-linux-icc b/config/defconfig_i686-native-linux-icc
new file mode 120000
index 000000000..e6a466b3e
--- /dev/null
+++ b/config/defconfig_i686-native-linux-icc
@@ -0,0 +1 @@
+defconfig_i686-native-linuxapp-icc
\ No newline at end of file
diff --git a/config/defconfig_i686-native-linuxapp-gcc b/config/defconfig_i686-native-linuxapp-gcc
index 9b7086859..0340c84cf 100644
--- a/config/defconfig_i686-native-linuxapp-gcc
+++ b/config/defconfig_i686-native-linuxapp-gcc
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="native"
diff --git a/config/defconfig_i686-native-linuxapp-icc b/config/defconfig_i686-native-linuxapp-icc
index 17defd803..34a55fd18 100644
--- a/config/defconfig_i686-native-linuxapp-icc
+++ b/config/defconfig_i686-native-linuxapp-icc
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="native"
diff --git a/config/defconfig_ppc_64-power8-linux-gcc b/config/defconfig_ppc_64-power8-linux-gcc
new file mode 120000
index 000000000..580c92e12
--- /dev/null
+++ b/config/defconfig_ppc_64-power8-linux-gcc
@@ -0,0 +1 @@
+defconfig_ppc_64-power8-linuxapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_ppc_64-power8-linuxapp-gcc b/config/defconfig_ppc_64-power8-linuxapp-gcc
index 8cbf7ed50..7e248b755 100644
--- a/config/defconfig_ppc_64-power8-linuxapp-gcc
+++ b/config/defconfig_ppc_64-power8-linuxapp-gcc
@@ -28,7 +28,7 @@
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="power8"
diff --git a/config/defconfig_x86_64-native-bsdapp-clang b/config/defconfig_x86_64-native-bsdapp-clang
index 8d2d10b48..7204738e1 100644
--- a/config/defconfig_x86_64-native-bsdapp-clang
+++ b/config/defconfig_x86_64-native-bsdapp-clang
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_bsdapp"
+#include "common_freebsd"
CONFIG_RTE_MACHINE="native"
diff --git a/config/defconfig_x86_64-native-bsdapp-gcc b/config/defconfig_x86_64-native-bsdapp-gcc
index 174a74b0e..b24e2e6d5 100644
--- a/config/defconfig_x86_64-native-bsdapp-gcc
+++ b/config/defconfig_x86_64-native-bsdapp-gcc
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_bsdapp"
+#include "common_freebsd"
CONFIG_RTE_MACHINE="native"
diff --git a/config/defconfig_x86_64-native-freebsd-clang b/config/defconfig_x86_64-native-freebsd-clang
new file mode 120000
index 000000000..76115fd5a
--- /dev/null
+++ b/config/defconfig_x86_64-native-freebsd-clang
@@ -0,0 +1 @@
+defconfig_x86_64-native-bsdapp-clang
\ No newline at end of file
diff --git a/config/defconfig_x86_64-native-freebsd-gcc b/config/defconfig_x86_64-native-freebsd-gcc
new file mode 120000
index 000000000..72dd4b44b
--- /dev/null
+++ b/config/defconfig_x86_64-native-freebsd-gcc
@@ -0,0 +1 @@
+defconfig_x86_64-native-bsdapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_x86_64-native-linux-clang b/config/defconfig_x86_64-native-linux-clang
new file mode 120000
index 000000000..3bcf89d6a
--- /dev/null
+++ b/config/defconfig_x86_64-native-linux-clang
@@ -0,0 +1 @@
+defconfig_x86_64-native-linuxapp-clang
\ No newline at end of file
diff --git a/config/defconfig_x86_64-native-linux-gcc b/config/defconfig_x86_64-native-linux-gcc
new file mode 120000
index 000000000..d70796594
--- /dev/null
+++ b/config/defconfig_x86_64-native-linux-gcc
@@ -0,0 +1 @@
+defconfig_x86_64-native-linuxapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_x86_64-native-linux-icc b/config/defconfig_x86_64-native-linux-icc
new file mode 120000
index 000000000..a36b47131
--- /dev/null
+++ b/config/defconfig_x86_64-native-linux-icc
@@ -0,0 +1 @@
+defconfig_x86_64-native-linuxapp-icc
\ No newline at end of file
diff --git a/config/defconfig_x86_64-native-linuxapp-clang b/config/defconfig_x86_64-native-linuxapp-clang
index 52d0d22fc..7508c0f2d 100644
--- a/config/defconfig_x86_64-native-linuxapp-clang
+++ b/config/defconfig_x86_64-native-linuxapp-clang
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="native"
diff --git a/config/defconfig_x86_64-native-linuxapp-gcc b/config/defconfig_x86_64-native-linuxapp-gcc
index afa5d478e..db67066a5 100644
--- a/config/defconfig_x86_64-native-linuxapp-gcc
+++ b/config/defconfig_x86_64-native-linuxapp-gcc
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="native"
diff --git a/config/defconfig_x86_64-native-linuxapp-icc b/config/defconfig_x86_64-native-linuxapp-icc
index 59783111c..d3ecae475 100644
--- a/config/defconfig_x86_64-native-linuxapp-icc
+++ b/config/defconfig_x86_64-native-linuxapp-icc
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="native"
diff --git a/config/defconfig_x86_x32-native-linux-gcc b/config/defconfig_x86_x32-native-linux-gcc
new file mode 120000
index 000000000..7ea00cecb
--- /dev/null
+++ b/config/defconfig_x86_x32-native-linux-gcc
@@ -0,0 +1 @@
+defconfig_x86_x32-native-linuxapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_x86_x32-native-linuxapp-gcc b/config/defconfig_x86_x32-native-linuxapp-gcc
index 2c8419f14..14445abaa 100644
--- a/config/defconfig_x86_x32-native-linuxapp-gcc
+++ b/config/defconfig_x86_x32-native-linuxapp-gcc
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="native"
diff --git a/devtools/build-tags.sh b/devtools/build-tags.sh
index 67b12f65a..dfd66c2d4 100755
--- a/devtools/build-tags.sh
+++ b/devtools/build-tags.sh
@@ -40,8 +40,8 @@ ignore="( -name .svn -o -name CVS -o -name .hg -o -name .git ) -prune -o"
source_dirs="app buildtools drivers examples lib"
-skip_bsd="( -name bsdapp ) -prune -o"
-skip_linux="( -name linuxapp ) -prune -o"
+skip_bsd="( -name freebsd ) -prune -o"
+skip_linux="( -name linux ) -prune -o"
skip_arch="( -name arch ) -prune -o"
skip_sse="( -name *_sse*.[chS] ) -prune -o"
skip_avx="( -name *_avx*.[chS] ) -prune -o"
@@ -146,8 +146,8 @@ check_valid_target()
if [ -n "$2" ]; then
check_valid_target $2
- echo $2 | grep -q "linuxapp-" || linux=false
- echo $2 | grep -q "bsdapp-" || bsd=false
+ echo $2 | grep -q "linux" || linux=false
+ echo $2 | grep -q "bsd" || bsd=false
echo $2 | grep -q "x86_64-" || x86_64=false
echo $2 | grep -q "arm-" || arm_32=false
echo $2 | grep -q "arm64-" || arm_64=false
diff --git a/devtools/test-build.sh b/devtools/test-build.sh
index 19ff759ed..70e91da52 100755
--- a/devtools/test-build.sh
+++ b/devtools/test-build.sh
@@ -46,7 +46,7 @@ print_help () {
-v verbose build
config: defconfig[[~][+]option1[[~][+]option2...]]
- Example: x86_64-native-linuxapp-gcc+debug~RXTX_CALLBACKS
+ Example: x86_64-native-linux-gcc+debug~RXTX_CALLBACKS
The lowercase options are defined inside $(basename $0).
The uppercase options can be the end of a defconfig option
to enable if prefixed with '+' or to disable if prefixed with '~'.
diff --git a/devtools/validate-abi.sh b/devtools/validate-abi.sh
index 138436d93..54df2e476 100755
--- a/devtools/validate-abi.sh
+++ b/devtools/validate-abi.sh
@@ -9,7 +9,7 @@ set -e
abicheck=abi-compliance-checker
abidump=abi-dumper
default_dst=abi-check
-default_target=x86_64-native-linuxapp-gcc
+default_target=x86_64-native-linux-gcc
# trap on error
err_report() {
diff --git a/doc/build-sdk-quick.txt b/doc/build-sdk-quick.txt
index ff297806a..bcfa7d6fe 100644
--- a/doc/build-sdk-quick.txt
+++ b/doc/build-sdk-quick.txt
@@ -1,7 +1,7 @@
Basic build
make defconfig && make
or
- make config T=x86_64-native-linuxapp-gcc && make
+ make config T=x86_64-native-linux-gcc && make
Build commands
config get configuration from target template (T=)
defconfig auto-select target template based on arch, OS, etc.
diff --git a/doc/guides/compressdevs/octeontx.rst b/doc/guides/compressdevs/octeontx.rst
index c57d03a8e..5924ad1fa 100644
--- a/doc/guides/compressdevs/octeontx.rst
+++ b/doc/guides/compressdevs/octeontx.rst
@@ -68,7 +68,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-thunderx-linuxapp-gcc install
+ make config T=arm64-thunderx-linux-gcc install
Initialization
@@ -97,7 +97,7 @@ probed. To use the PMD in an application, user must:
reserve enough huge pages
cd to the top-level DPDK directory
- export RTE_TARGET=arm64-thunderx-linuxapp-gcc
+ export RTE_TARGET=arm64-thunderx-linux-gcc
export RTE_SDK=`pwd`
cd to app/test
type the command "make" to compile
diff --git a/doc/guides/contributing/design.rst b/doc/guides/contributing/design.rst
index 7b18de409..d3dd694b6 100644
--- a/doc/guides/contributing/design.rst
+++ b/doc/guides/contributing/design.rst
@@ -7,12 +7,12 @@ Design
Environment or Architecture-specific Sources
--------------------------------------------
-In DPDK and DPDK applications, some code is specific to an architecture (i686, x86_64) or to an executive environment (bsdapp or linuxapp) and so on.
+In DPDK and DPDK applications, some code is specific to an architecture (i686, x86_64) or to an executive environment (freebsd or linux) and so on.
As far as is possible, all such instances of architecture or env-specific code should be provided via standard APIs in the EAL.
By convention, a file is common if it is not located in a directory indicating that it is specific.
For instance, a file located in a subdir of "x86_64" directory is specific to this architecture.
-A file located in a subdir of "linuxapp" is specific to this execution environment.
+A file located in a subdir of "linux" is specific to this execution environment.
.. note::
@@ -81,7 +81,7 @@ are collected for any instance of any object type provided by the library:
.. code-block:: console
- # DPDK file config/common_linuxapp, config/common_bsdapp, etc.
+ # DPDK file config/common_linux, config/common_freebsd, etc.
CONFIG_RTE_<LIBRARY_NAME>_STATS_COLLECT=y/n
The default value for this DPDK configuration file variable (either "yes" or
diff --git a/doc/guides/contributing/patches.rst b/doc/guides/contributing/patches.rst
index 211a5cdc7..90927a52d 100644
--- a/doc/guides/contributing/patches.rst
+++ b/doc/guides/contributing/patches.rst
@@ -437,7 +437,7 @@ Makefile System
Compilation of patches and changes should be tested using the ``test-build.sh`` script in the ``devtools``
directory of the DPDK repo::
- devtools/test-build.sh x86_64-native-linuxapp-gcc+next+shared
+ devtools/test-build.sh x86_64-native-linux-gcc+next+shared
The script usage is::
@@ -452,9 +452,9 @@ Where:
Examples of configs are::
- x86_64-native-linuxapp-gcc
- x86_64-native-linuxapp-gcc+next+shared
- x86_64-native-linuxapp-clang+shared
+ x86_64-native-linux-gcc
+ x86_64-native-linux-gcc+next+shared
+ x86_64-native-linux-clang+shared
The builds can be modified via the following environmental variables:
@@ -468,9 +468,9 @@ These can be set from the command line or in the config files shown above in the
The recommended configurations and options to test compilation prior to submitting patches are::
- x86_64-native-linuxapp-gcc+shared+next
- x86_64-native-linuxapp-clang+shared
- i686-native-linuxapp-gcc
+ x86_64-native-linux-gcc+shared+next
+ x86_64-native-linux-clang+shared
+ i686-native-linux-gcc
export DPDK_DEP_ZLIB=y
export DPDK_DEP_PCAP=y
diff --git a/doc/guides/contributing/versioning.rst b/doc/guides/contributing/versioning.rst
index 18b031998..e7b326b5d 100644
--- a/doc/guides/contributing/versioning.rst
+++ b/doc/guides/contributing/versioning.rst
@@ -557,13 +557,13 @@ on the local repo and target is the usual DPDK compilation target.
For example::
# Check between the previous and latest commit:
- ./devtools/validate-abi.sh HEAD~1 HEAD x86_64-native-linuxapp-gcc
+ ./devtools/validate-abi.sh HEAD~1 HEAD x86_64-native-linux-gcc
# Check between two tags:
- ./devtools/validate-abi.sh v2.0.0 v2.1.0 x86_64-native-linuxapp-gcc
+ ./devtools/validate-abi.sh v2.0.0 v2.1.0 x86_64-native-linux-gcc
# Check between git master and local topic-branch "vhost-hacking":
- ./devtools/validate-abi.sh master vhost-hacking x86_64-native-linuxapp-gcc
+ ./devtools/validate-abi.sh master vhost-hacking x86_64-native-linux-gcc
After the validation script completes (it can take a while since it need to
compile both tags) it will create compatibility reports in the
diff --git a/doc/guides/cryptodevs/armv8.rst b/doc/guides/cryptodevs/armv8.rst
index 725398daf..e60af8400 100644
--- a/doc/guides/cryptodevs/armv8.rst
+++ b/doc/guides/cryptodevs/armv8.rst
@@ -42,7 +42,7 @@ In order to enable this virtual crypto PMD, user must:
make -C $ARMV8_CRYPTO_LIB_PATH/
* Set CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=y in
- config/defconfig_arm64-armv8a-linuxapp-gcc
+ config/defconfig_arm64-armv8a-linux-gcc
The corresponding device can be created only if the following features
are supported by the CPU:
diff --git a/doc/guides/cryptodevs/caam_jr.rst b/doc/guides/cryptodevs/caam_jr.rst
index e87ff0915..6622b79c7 100644
--- a/doc/guides/cryptodevs/caam_jr.rst
+++ b/doc/guides/cryptodevs/caam_jr.rst
@@ -121,14 +121,14 @@ to enable caam_jr PMD.
Please note that enabling debugging options may affect system performance.
* ``CONFIG_RTE_LIBRTE_PMD_CAAM_JR`` (default ``n``)
- By default it is only enabled in common_linuxapp config.
+ By default it is only enabled in common_linux config.
Toggle compilation of the ``librte_pmd_caam_jr`` driver.
* ``CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE`` (default ``n``)
By default it is disabled.
It can be used when the underlying hardware supports the CAAM in BE mode.
e.g. LS1043A, LS1046A supports CAAM in BE mode.
- BE mode is enabled by default in defconfig-arm64-dpaa-linuxapp-gcc.
+ BE mode is enabled by default in defconfig-arm64-dpaa-linux-gcc.
Installations
-------------
@@ -138,7 +138,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-armv8a-linuxapp-gcc install
+ make config T=arm64-armv8a-linux-gcc install
Enabling logs
-------------
diff --git a/doc/guides/cryptodevs/dpaa2_sec.rst b/doc/guides/cryptodevs/dpaa2_sec.rst
index aee79ab44..21cb00360 100644
--- a/doc/guides/cryptodevs/dpaa2_sec.rst
+++ b/doc/guides/cryptodevs/dpaa2_sec.rst
@@ -191,7 +191,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-dpaa2-linuxapp-gcc install
+ make config T=arm64-dpaa2-linux-gcc install
Enabling logs
-------------
diff --git a/doc/guides/cryptodevs/dpaa_sec.rst b/doc/guides/cryptodevs/dpaa_sec.rst
index 897a4fe80..0a2600634 100644
--- a/doc/guides/cryptodevs/dpaa_sec.rst
+++ b/doc/guides/cryptodevs/dpaa_sec.rst
@@ -131,7 +131,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-dpaa-linuxapp-gcc install
+ make config T=arm64-dpaa-linux-gcc install
Enabling logs
-------------
diff --git a/doc/guides/cryptodevs/openssl.rst b/doc/guides/cryptodevs/openssl.rst
index bdc30f66f..89aa5bac4 100644
--- a/doc/guides/cryptodevs/openssl.rst
+++ b/doc/guides/cryptodevs/openssl.rst
@@ -67,7 +67,7 @@ For Ubuntu 14.04 LTS these packages have to be installed in the build system:
.. code-block:: console
sudo apt-get install openssl
- sudo apt-get install libc6-dev-i386 # for i686-native-linuxapp-gcc target
+ sudo apt-get install libc6-dev-i386 # for i686-native-linux-gcc target
This code was also verified on Fedora 24.
This code has NOT been verified on FreeBSD yet.
diff --git a/doc/guides/cryptodevs/virtio.rst b/doc/guides/cryptodevs/virtio.rst
index cfc6d57d7..1496ec920 100644
--- a/doc/guides/cryptodevs/virtio.rst
+++ b/doc/guides/cryptodevs/virtio.rst
@@ -79,8 +79,8 @@ Finally the front-end virtio crypto PMD driver can be installed:
cd to the top-level DPDK directory
sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO\)=n,\1=y,' config/common_base
- make config T=x86_64-native-linuxapp-gcc
- make install T=x86_64-native-linuxapp-gcc
+ make config T=x86_64-native-linux-gcc
+ make install T=x86_64-native-linux-gcc
Tests
-----
@@ -91,7 +91,7 @@ The unit test cases can be tested as below:
reserve enough huge pages
cd to the top-level DPDK directory
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
export RTE_SDK=`pwd`
cd to app/test
type the command "make" to compile
@@ -104,7 +104,7 @@ The performance can be tested as below:
reserve enough huge pages
cd to the top-level DPDK directory
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
export RTE_SDK=`pwd`
cd to app/test-crypto-perf
type the command "make" to compile
diff --git a/doc/guides/cryptodevs/zuc.rst b/doc/guides/cryptodevs/zuc.rst
index e38989968..69a5218b1 100644
--- a/doc/guides/cryptodevs/zuc.rst
+++ b/doc/guides/cryptodevs/zuc.rst
@@ -62,7 +62,7 @@ In order to enable this virtual crypto PMD, user must:
.. code-block:: console
- make config T=x86_64-native-linuxapp-gcc
+ make config T=x86_64-native-linux-gcc
sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_ZUC\)=n,\1=y,' build/.config
make
diff --git a/doc/guides/eventdevs/dpaa.rst b/doc/guides/eventdevs/dpaa.rst
index cfc40347a..be68c6da6 100644
--- a/doc/guides/eventdevs/dpaa.rst
+++ b/doc/guides/eventdevs/dpaa.rst
@@ -62,7 +62,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-dpaa-linuxapp-gcc install
+ make config T=arm64-dpaa-linux-gcc install
Initialization
--------------
diff --git a/doc/guides/eventdevs/dpaa2.rst b/doc/guides/eventdevs/dpaa2.rst
index 2b1700a5d..332b1a31c 100644
--- a/doc/guides/eventdevs/dpaa2.rst
+++ b/doc/guides/eventdevs/dpaa2.rst
@@ -71,7 +71,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-dpaa2-linuxapp-gcc install
+ make config T=arm64-dpaa2-linux-gcc install
Initialization
--------------
diff --git a/doc/guides/eventdevs/octeontx.rst b/doc/guides/eventdevs/octeontx.rst
index e276fd440..ab36a36e0 100644
--- a/doc/guides/eventdevs/octeontx.rst
+++ b/doc/guides/eventdevs/octeontx.rst
@@ -63,7 +63,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-thunderx-linuxapp-gcc install
+ make config T=arm64-thunderx-linux-gcc install
Initialization
diff --git a/doc/guides/freebsd_gsg/build_dpdk.rst b/doc/guides/freebsd_gsg/build_dpdk.rst
index 102ce1413..7abd85aa5 100644
--- a/doc/guides/freebsd_gsg/build_dpdk.rst
+++ b/doc/guides/freebsd_gsg/build_dpdk.rst
@@ -107,7 +107,7 @@ Where:
* ``MACHINE`` is: ``native``
-* ``EXECENV`` is: ``bsdapp``
+* ``EXECENV`` is: ``freebsd``
* ``TOOLCHAIN`` is: ``gcc`` | ``clang``
@@ -130,7 +130,7 @@ For example to compile for FreeBSD use:
.. code-block:: console
- gmake install T=x86_64-native-bsdapp-clang
+ gmake install T=x86_64-native-freebsd-clang
.. note::
@@ -208,7 +208,7 @@ An error such as:
.. code-block:: console
- kldload: can't load ./x86_64-native-bsdapp-gcc/kmod/contigmem.ko:
+ kldload: can't load ./x86_64-native-freebsd-gcc/kmod/contigmem.ko:
Exec format error
is generally attributed to not having enough contiguous memory
diff --git a/doc/guides/freebsd_gsg/build_sample_apps.rst b/doc/guides/freebsd_gsg/build_sample_apps.rst
index a085b6187..0c1b9cb79 100644
--- a/doc/guides/freebsd_gsg/build_sample_apps.rst
+++ b/doc/guides/freebsd_gsg/build_sample_apps.rst
@@ -13,7 +13,7 @@ Compiling a Sample Application
------------------------------
Once a DPDK target environment directory has been created (such as
-``x86_64-native-bsdapp-clang``), it contains all libraries and header files required
+``x86_64-native-freebsd-clang``), it contains all libraries and header files required
to build an application.
When compiling an application in the FreeBSD environment on the DPDK,
@@ -22,8 +22,8 @@ the following variables must be exported:
* ``RTE_SDK`` - Points to the DPDK installation directory.
* ``RTE_TARGET`` - Points to the DPDK target environment directory.
- For FreeBSD, this is the ``x86_64-native-bsdapp-clang`` or
- ``x86_64-native-bsdapp-gcc`` directory.
+ For FreeBSD, this is the ``x86_64-native-freebsd-clang`` or
+ ``x86_64-native-freebsd-gcc`` directory.
The following is an example of creating the ``helloworld`` application, which runs
in the DPDK FreeBSD environment. While the example demonstrates compiling
@@ -43,7 +43,7 @@ in the build directory.
cd $(RTE_SDK)
cd examples/helloworld/
setenv RTE_SDK $HOME/DPDK
- setenv RTE_TARGET x86_64-native-bsdapp-gcc
+ setenv RTE_TARGET x86_64-native-freebsd-gcc
gmake CC=gcc49
CC main.o
@@ -67,7 +67,7 @@ in the build directory.
setenv RTE_SDK /home/user/DPDK
cp -r $(RTE_SDK)/examples/helloworld my_rte_app
cd my_rte_app/
- setenv RTE_TARGET x86_64-native-bsdapp-gcc
+ setenv RTE_TARGET x86_64-native-freebsd-gcc
gmake CC=gcc49
CC main.o
diff --git a/doc/guides/freebsd_gsg/install_from_ports.rst b/doc/guides/freebsd_gsg/install_from_ports.rst
index 253328eb1..633699e9d 100644
--- a/doc/guides/freebsd_gsg/install_from_ports.rst
+++ b/doc/guides/freebsd_gsg/install_from_ports.rst
@@ -57,7 +57,7 @@ environmental variables should be set as below:
* ``RTE_SDK=/usr/local/share/dpdk``
-* ``RTE_TARGET=x86_64-native-bsdapp-clang``
+* ``RTE_TARGET=x86_64-native-freebsd-clang``
.. note::
@@ -72,7 +72,7 @@ compiled and run as below:
export RTE_SDK=/usr/local/share/dpdk
- export RTE_TARGET=x86_64-native-bsdapp-clang
+ export RTE_TARGET=x86_64-native-freebsd-clang
cp -r /usr/local/share/dpdk/examples/helloworld .
diff --git a/doc/guides/freebsd_gsg/intro.rst b/doc/guides/freebsd_gsg/intro.rst
index 115f428f9..e5611bca6 100644
--- a/doc/guides/freebsd_gsg/intro.rst
+++ b/doc/guides/freebsd_gsg/intro.rst
@@ -7,7 +7,7 @@ Introduction
This document contains instructions for installing and configuring the
Data Plane Development Kit (DPDK) software. It is designed to get customers
up and running quickly and describes how to compile and run a
-DPDK application in a FreeBSD application (bsdapp) environment, without going
+DPDK application in a FreeBSD application (freebsd) environment, without going
deeply into detail.
For a comprehensive guide to installing and using FreeBSD, the following
@@ -37,7 +37,7 @@ The following is a list of DPDK documents in the suggested reading order:
* **Programmer's Guide**: Describes:
* The software architecture and how to use it (through examples),
- specifically in a Linux* application (linuxapp) environment
+ specifically in a Linux* application (linux) environment
* The content of the DPDK, the build system (including the commands
that can be used in the root DPDK Makefile to build the development
diff --git a/doc/guides/howto/lm_bond_virtio_sriov.rst b/doc/guides/howto/lm_bond_virtio_sriov.rst
index a47d6dbf8..ee8ccdaf5 100644
--- a/doc/guides/howto/lm_bond_virtio_sriov.rst
+++ b/doc/guides/howto/lm_bond_virtio_sriov.rst
@@ -591,7 +591,7 @@ Set up DPDK in the Virtual Machine
rmmod virtio-pci ixgbevf
modprobe uio
- insmod /root/dpdk/x86_64-default-linuxapp-gcc/kmod/igb_uio.ko
+ insmod /root/dpdk/x86_64-default-linux-gcc/kmod/igb_uio.ko
/root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:03.0
/root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:04.0
@@ -613,7 +613,7 @@ Run testpmd in the Virtual Machine.
# use for bonding of virtio and vf tests in VM
- /root/dpdk/x86_64-default-linuxapp-gcc/app/testpmd \
+ /root/dpdk/x86_64-default-linux-gcc/app/testpmd \
-l 0-3 -n 4 --socket-mem 350 -- --i --port-topology=chained
.. _lm_bond_virtio_sriov_switch_conf:
diff --git a/doc/guides/howto/lm_virtio_vhost_user.rst b/doc/guides/howto/lm_virtio_vhost_user.rst
index 3f5ebd58a..6ebc10f71 100644
--- a/doc/guides/howto/lm_virtio_vhost_user.rst
+++ b/doc/guides/howto/lm_virtio_vhost_user.rst
@@ -421,7 +421,7 @@ setup_dpdk_virtio_in_vm.sh
rmmod virtio-pci
modprobe uio
- insmod /root/dpdk/x86_64-default-linuxapp-gcc/kmod/igb_uio.ko
+ insmod /root/dpdk/x86_64-default-linux-gcc/kmod/igb_uio.ko
/root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:03.0
/root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:04.0
@@ -437,5 +437,5 @@ run_testpmd_in_vm.sh
# Run testpmd for use with vhost_user sample app.
# test system has 8 cpus (0-7), use cpus 2-7 for VM
- /root/dpdk/x86_64-default-linuxapp-gcc/app/testpmd \
+ /root/dpdk/x86_64-default-linux-gcc/app/testpmd \
-l 0-5 -n 4 --socket-mem 350 -- --burst=64 --i
diff --git a/doc/guides/howto/pvp_reference_benchmark.rst b/doc/guides/howto/pvp_reference_benchmark.rst
index 67fa232ec..b90c63457 100644
--- a/doc/guides/howto/pvp_reference_benchmark.rst
+++ b/doc/guides/howto/pvp_reference_benchmark.rst
@@ -132,7 +132,7 @@ Build DPDK:
git clone git://dpdk.org/dpdk
cd dpdk
export RTE_SDK=$PWD
- make install T=x86_64-native-linuxapp-gcc DESTDIR=install
+ make install T=x86_64-native-linux-gcc DESTDIR=install
Testpmd launch
@@ -346,7 +346,7 @@ Build DPDK:
git clone git://dpdk.org/dpdk
cd dpdk
export RTE_SDK=$PWD
- make install T=x86_64-native-linuxapp-gcc DESTDIR=install
+ make install T=x86_64-native-linux-gcc DESTDIR=install
Testpmd launch
diff --git a/doc/guides/howto/virtio_user_for_container_networking.rst b/doc/guides/howto/virtio_user_for_container_networking.rst
index 2313dc794..f31d918bc 100644
--- a/doc/guides/howto/virtio_user_for_container_networking.rst
+++ b/doc/guides/howto/virtio_user_for_container_networking.rst
@@ -60,7 +60,7 @@ some minor changes.
.. code-block:: console
- make install RTE_SDK=`pwd` T=x86_64-native-linuxapp-gcc
+ make install RTE_SDK=`pwd` T=x86_64-native-linux-gcc
#. Write a Dockerfile like below.
@@ -70,7 +70,7 @@ some minor changes.
FROM ubuntu:latest
WORKDIR /usr/src/dpdk
COPY . /usr/src/dpdk
- ENV PATH "$PATH:/usr/src/dpdk/x86_64-native-linuxapp-gcc/app/"
+ ENV PATH "$PATH:/usr/src/dpdk/x86_64-native-linux-gcc/app/"
EOT
#. Build a Docker image.
diff --git a/doc/guides/linux_gsg/build_dpdk.rst b/doc/guides/linux_gsg/build_dpdk.rst
index d02fd7848..7c0329fcc 100644
--- a/doc/guides/linux_gsg/build_dpdk.rst
+++ b/doc/guides/linux_gsg/build_dpdk.rst
@@ -46,7 +46,7 @@ where:
* ``MACHINE`` can be: ``native``, ``power8``, ``armv8a``
-* ``EXECENV`` can be: ``linuxapp``, ``bsdapp``
+* ``EXECENV`` can be: ``linux``, ``freebsd``
* ``TOOLCHAIN`` can be: ``gcc``, ``icc``
@@ -76,20 +76,20 @@ For example, to compile a 64-bit target using icc, run:
.. code-block:: console
- make install T=x86_64-native-linuxapp-icc
+ make install T=x86_64-native-linux-icc
To compile a 32-bit build using gcc, the make command should be:
.. code-block:: console
- make install T=i686-native-linuxapp-gcc
+ make install T=i686-native-linux-gcc
To prepare a target without building it, for example, if the configuration changes need to be made before compilation,
use the ``make config T=<target>`` command:
.. code-block:: console
- make config T=x86_64-native-linuxapp-gcc
+ make config T=x86_64-native-linux-gcc
.. warning::
@@ -104,7 +104,7 @@ The user may also make modifications to the compile-time DPDK configuration by e
.. code-block:: console
- cd x86_64-native-linuxapp-gcc
+ cd x86_64-native-linux-gcc
vi .config
make
diff --git a/doc/guides/linux_gsg/build_sample_apps.rst b/doc/guides/linux_gsg/build_sample_apps.rst
index 332424e05..2f606535c 100644
--- a/doc/guides/linux_gsg/build_sample_apps.rst
+++ b/doc/guides/linux_gsg/build_sample_apps.rst
@@ -15,7 +15,7 @@ It also provides a pointer to where sample applications are stored.
Compiling a Sample Application
------------------------------
-Once an DPDK target environment directory has been created (such as ``x86_64-native-linuxapp-gcc``),
+Once an DPDK target environment directory has been created (such as ``x86_64-native-linux-gcc``),
it contains all libraries and header files required to build an application.
When compiling an application in the Linux* environment on the DPDK, the following variables must be exported:
@@ -36,7 +36,7 @@ By default, the binary is generated in the build directory.
cd examples/helloworld/
export RTE_SDK=$HOME/DPDK
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
make
CC main.o
@@ -58,7 +58,7 @@ By default, the binary is generated in the build directory.
export RTE_SDK=/home/user/DPDK
cp -r $(RTE_SDK)/examples/helloworld my_rte_app
cd my_rte_app/
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
make
CC main.o
diff --git a/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst b/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst
index 9d1f0fa00..270a60674 100644
--- a/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst
+++ b/doc/guides/linux_gsg/cross_build_dpdk_for_arm64.rst
@@ -76,11 +76,11 @@ Copy the NUMA header files and lib to the cross compiler's directories:
Configure and cross compile DPDK Build
--------------------------------------
-To configure a build, choose one of the target configurations, like arm64-dpaa2-linuxapp-gcc and arm64-thunderx-linuxapp-gcc.
+To configure a build, choose one of the target configurations, like arm64-dpaa2-linux-gcc and arm64-thunderx-linux-gcc.
.. code-block:: console
- make config T=arm64-armv8a-linuxapp-gcc
+ make config T=arm64-armv8a-linux-gcc
To cross-compile, without compiling the kernel modules, use the following command:
@@ -128,5 +128,5 @@ command::
For example if the target machine is arm64 we can use the following
command::
- meson arm64-build --cross-file config/arm/arm64_armv8_linuxapp_gcc
+ meson arm64-build --cross-file config/arm/arm64_armv8_linux_gcc
ninja -C arm64-build
diff --git a/doc/guides/linux_gsg/intro.rst b/doc/guides/linux_gsg/intro.rst
index 74a8bc9fd..94877f4ae 100644
--- a/doc/guides/linux_gsg/intro.rst
+++ b/doc/guides/linux_gsg/intro.rst
@@ -6,7 +6,7 @@ Introduction
This document contains instructions for installing and configuring the Data Plane Development Kit (DPDK) software.
It is designed to get customers up and running quickly.
-The document describes how to compile and run a DPDK application in a Linux application (linuxapp) environment,
+The document describes how to compile and run a DPDK application in a Linux application (linux) environment,
without going deeply into detail.
Documentation Roadmap
@@ -21,7 +21,7 @@ The following is a list of DPDK documents in the suggested reading order:
* Programmer's Guide: Describes:
- * The software architecture and how to use it (through examples), specifically in a Linux application (linuxapp) environment
+ * The software architecture and how to use it (through examples), specifically in a Linux application (linux) environment
* The content of the DPDK, the build system (including the commands that can be used in the root DPDK Makefile to build the development kit and
an application) and guidelines for porting an application
diff --git a/doc/guides/linux_gsg/nic_perf_intel_platform.rst b/doc/guides/linux_gsg/nic_perf_intel_platform.rst
index a556a4008..0c25ec03d 100644
--- a/doc/guides/linux_gsg/nic_perf_intel_platform.rst
+++ b/doc/guides/linux_gsg/nic_perf_intel_platform.rst
@@ -133,7 +133,7 @@ Configurations before running DPDK
# Build DPDK target.
cd dpdk_folder
- make install T=x86_64-native-linuxapp-gcc -j
+ make install T=x86_64-native-linux-gcc -j
# Get the hugepage size.
awk '/Hugepagesize/ {print $2}' /proc/meminfo
diff --git a/doc/guides/linux_gsg/quick_start.rst b/doc/guides/linux_gsg/quick_start.rst
index 43974df88..d7b04ae01 100644
--- a/doc/guides/linux_gsg/quick_start.rst
+++ b/doc/guides/linux_gsg/quick_start.rst
@@ -93,25 +93,25 @@ Some options in the script prompt the user for further data before proceeding.
------------------------------------------------------------------------
- [1] i686-native-linuxapp-gcc
+ [1] i686-native-linux-gcc
- [2] i686-native-linuxapp-icc
+ [2] i686-native-linux-icc
- [3] ppc_64-power8-linuxapp-gcc
+ [3] ppc_64-power8-linux-gcc
- [4] x86_64-native-bsdapp-clang
+ [4] x86_64-native-freebsd-clang
- [5] x86_64-native-bsdapp-gcc
+ [5] x86_64-native-freebsd-gcc
- [6] x86_64-native-linuxapp-clang
+ [6] x86_64-native-linux-clang
- [7] x86_64-native-linuxapp-gcc
+ [7] x86_64-native-linux-gcc
- [8] x86_64-native-linuxapp-icc
+ [8] x86_64-native-linux-icc
------------------------------------------------------------------------
- Step 2: Setup linuxapp environment
+ Step 2: Setup linux environment
------------------------------------------------------------------------
@@ -135,7 +135,7 @@ Some options in the script prompt the user for further data before proceeding.
------------------------------------------------------------------------
- Step 3: Run test application for linuxapp environment
+ Step 3: Run test application for linux environment
------------------------------------------------------------------------
@@ -173,19 +173,19 @@ Some options in the script prompt the user for further data before proceeding.
Option:
-The following selection demonstrates the creation of the ``x86_64-native-linuxapp-gcc`` DPDK library.
+The following selection demonstrates the creation of the ``x86_64-native-linux-gcc`` DPDK library.
.. code-block:: console
Option: 9
- ================== Installing x86_64-native-linuxapp-gcc
+ ================== Installing x86_64-native-linux-gcc
Configuration done
== Build lib
...
Build complete
- RTE_TARGET exported as x86_64-native-linuxapp-gcc
+ RTE_TARGET exported as x86_64-native-linux-gcc
The following selection demonstrates the starting of the DPDK UIO driver.
diff --git a/doc/guides/mempool/octeontx.rst b/doc/guides/mempool/octeontx.rst
index 3ade61fc2..dfa1993e1 100644
--- a/doc/guides/mempool/octeontx.rst
+++ b/doc/guides/mempool/octeontx.rst
@@ -56,7 +56,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-thunderx-linuxapp-gcc
+ make config T=arm64-thunderx-linux-gcc
Initialization
diff --git a/doc/guides/nics/build_and_test.rst b/doc/guides/nics/build_and_test.rst
index d9a78eef0..aae5c111d 100644
--- a/doc/guides/nics/build_and_test.rst
+++ b/doc/guides/nics/build_and_test.rst
@@ -33,26 +33,26 @@ Example output:
.. code-block:: console
- arm-armv7a-linuxapp-gcc
- arm64-armv8a-linuxapp-gcc
- arm64-dpaa2-linuxapp-gcc
- arm64-thunderx-linuxapp-gcc
- arm64-xgene1-linuxapp-gcc
- i686-native-linuxapp-gcc
- i686-native-linuxapp-icc
- ppc_64-power8-linuxapp-gcc
- x86_64-native-bsdapp-clang
- x86_64-native-bsdapp-gcc
- x86_64-native-linuxapp-clang
- x86_64-native-linuxapp-gcc
- x86_64-native-linuxapp-icc
- x86_x32-native-linuxapp-gcc
+ arm-armv7a-linux-gcc
+ arm64-armv8a-linux-gcc
+ arm64-dpaa2-linux-gcc
+ arm64-thunderx-linux-gcc
+ arm64-xgene1-linux-gcc
+ i686-native-linux-gcc
+ i686-native-linux-icc
+ ppc_64-power8-linux-gcc
+ x86_64-native-freebsd-clang
+ x86_64-native-freebsd-gcc
+ x86_64-native-linux-clang
+ x86_64-native-linux-gcc
+ x86_64-native-linux-icc
+ x86_x32-native-linux-gcc
To compile a PMD for Linux x86_64 gcc target, run the following "make" command:
.. code-block:: console
- make install T=x86_64-native-linuxapp-gcc
+ make install T=x86_64-native-linux-gcc
Use ARM (ThunderX, DPAA, X-Gene) or PowerPC target for respective platform.
@@ -102,7 +102,7 @@ This section demonstrates how to setup and run ``testpmd`` in Linux.
.. code-block:: console
modprobe uio
- insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
+ insmod ./x86_64-native-linux-gcc/kmod/igb_uio.ko
or
@@ -139,7 +139,7 @@ This section demonstrates how to setup and run ``testpmd`` in Linux.
.. code-block:: console
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 0-3 -n 4 -- -i
+ ./x86_64-native-linux-gcc/app/testpmd -l 0-3 -n 4 -- -i
Successful execution will show initialization messages from EAL, PMD and
testpmd application. A prompt will be displayed at the end for user commands
diff --git a/doc/guides/nics/cxgbe.rst b/doc/guides/nics/cxgbe.rst
index 58d88eef5..f3e611506 100644
--- a/doc/guides/nics/cxgbe.rst
+++ b/doc/guides/nics/cxgbe.rst
@@ -493,7 +493,7 @@ devices managed by librte_pmd_cxgbe in FreeBSD operating system.
.. code-block:: console
- cp x86_64-native-bsdapp-clang/kmod/contigmem.ko /boot/kernel/
+ cp x86_64-native-freebsd-clang/kmod/contigmem.ko /boot/kernel/
#. Add the following lines to /boot/loader.conf:
@@ -574,13 +574,13 @@ devices managed by librte_pmd_cxgbe in FreeBSD operating system.
.. code-block:: console
- kldload ./x86_64-native-bsdapp-clang/kmod/nic_uio.ko
+ kldload ./x86_64-native-freebsd-clang/kmod/nic_uio.ko
#. Start testpmd with basic parameters:
.. code-block:: console
- ./x86_64-native-bsdapp-clang/app/testpmd -l 0-3 -n 4 -w 0000:02:00.4 -- -i
+ ./x86_64-native-freebsd-clang/app/testpmd -l 0-3 -n 4 -w 0000:02:00.4 -- -i
Example output:
diff --git a/doc/guides/nics/dpaa.rst b/doc/guides/nics/dpaa.rst
index 2173673b9..fb7bc7d0c 100644
--- a/doc/guides/nics/dpaa.rst
+++ b/doc/guides/nics/dpaa.rst
@@ -271,7 +271,7 @@ for details.
.. code-block:: console
- ./arm64-dpaa-linuxapp-gcc/testpmd -c 0xff -n 1 \
+ ./arm64-dpaa-linux-gcc/testpmd -c 0xff -n 1 \
-- -i --portmask=0x3 --nb-cores=1 --no-flush-rx
.....
diff --git a/doc/guides/nics/enic.rst b/doc/guides/nics/enic.rst
index bc38f51aa..6dfe5d7ac 100644
--- a/doc/guides/nics/enic.rst
+++ b/doc/guides/nics/enic.rst
@@ -572,7 +572,7 @@ PMD. Typically, the limit has to be raised to higher than 2GB.
e.g., 2621440
The compilation of any unused drivers can be disabled using the
-configuration file in config/ directory (e.g., config/common_linuxapp).
+configuration file in config/ directory (e.g., config/common_linux).
This would help in bringing down the time taken for building the
libraries and the initialization time of the application.
diff --git a/doc/guides/nics/intel_vf.rst b/doc/guides/nics/intel_vf.rst
index 49a7085a9..3400fe189 100644
--- a/doc/guides/nics/intel_vf.rst
+++ b/doc/guides/nics/intel_vf.rst
@@ -521,19 +521,19 @@ The setup procedure is as follows:
.. code-block:: console
- make install T=x86_64-native-linuxapp-gcc
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 0-3 -n 4 -- -i
+ make install T=x86_64-native-linux-gcc
+ ./x86_64-native-linux-gcc/app/testpmd -l 0-3 -n 4 -- -i
#. Finally, access the Guest OS using vncviewer with the localhost:5900 port and check the lspci command output in the Guest OS.
The virtual functions will be listed as available for use.
-#. Configure and install the DPDK with an x86_64-native-linuxapp-gcc configuration on the Guest OS as normal,
+#. Configure and install the DPDK with an x86_64-native-linux-gcc configuration on the Guest OS as normal,
that is, there is no change to the normal installation procedure.
.. code-block:: console
- make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
- cd x86_64-native-linuxapp-gcc
+ make config T=x86_64-native-linux-gcc O=x86_64-native-linux-gcc
+ cd x86_64-native-linux-gcc
make
.. note::
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 0b6749654..020037300 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -223,7 +223,7 @@ These options can be modified in the ``.config`` file.
.. note::
- For Bluefield, target should be set to ``arm64-bluefield-linuxapp-gcc``. This
+ For Bluefield, target should be set to ``arm64-bluefield-linux-gcc``. This
will enable ``CONFIG_RTE_LIBRTE_MLX5_PMD`` and set ``RTE_CACHE_LINE_SIZE`` to
64. Default armv8a configuration of make build and meson build set it to 128
then brings performance degradation.
diff --git a/doc/guides/nics/mvneta.rst b/doc/guides/nics/mvneta.rst
index 2132a8197..c8b00ddf2 100644
--- a/doc/guides/nics/mvneta.rst
+++ b/doc/guides/nics/mvneta.rst
@@ -133,7 +133,7 @@ the path to the MUSDK installation directory needs to be exported.
export LIBMUSDK_PATH=<musdk>/usr/local
export CROSS=aarch64-linux-gnu-
- make config T=arm64-armv8a-linuxapp-gcc
+ make config T=arm64-armv8a-linux-gcc
sed -ri 's,(MVNETA_PMD=)n,\1y,' build/.config
make
diff --git a/doc/guides/nics/mvpp2.rst b/doc/guides/nics/mvpp2.rst
index 4101d2d89..09e2f2a56 100644
--- a/doc/guides/nics/mvpp2.rst
+++ b/doc/guides/nics/mvpp2.rst
@@ -180,9 +180,9 @@ For additional instructions regarding DPDK cross compilation please refer to :do
export LIBMUSDK_PATH=<musdk>/usr/local
export CROSS=<toolchain>/bin/aarch64-linux-gnu-
export RTE_KERNELDIR=<kernel-dir>
- export RTE_TARGET=arm64-armv8a-linuxapp-gcc
+ export RTE_TARGET=arm64-armv8a-linux-gcc
- make config T=arm64-armv8a-linuxapp-gcc
+ make config T=arm64-armv8a-linux-gcc
sed -i "s/MVNETA_PMD=y/MVNETA_PMD=n/" build/.config
sed -i "s/MVPP2_PMD=n/MVPP2_PMD=y/" build/.config
make
diff --git a/doc/guides/nics/nfp.rst b/doc/guides/nics/nfp.rst
index 3bfb0ef61..09a8529b9 100644
--- a/doc/guides/nics/nfp.rst
+++ b/doc/guides/nics/nfp.rst
@@ -75,7 +75,7 @@ compile it along with other DPDK PMDs even if no BSP was installed previously.
Of course, a DPDK app will require such a BSP installed for using the
NFP PMD, along with a specific NFP firmware application.
-Default PMD configuration is at the **common_linuxapp configuration** file:
+Default PMD configuration is at the **common_linux configuration** file:
- **CONFIG_RTE_LIBRTE_NFP_PMD=y**
diff --git a/doc/guides/nics/octeontx.rst b/doc/guides/nics/octeontx.rst
index f8111d3cc..012a3ec21 100644
--- a/doc/guides/nics/octeontx.rst
+++ b/doc/guides/nics/octeontx.rst
@@ -71,7 +71,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-thunderx-linuxapp-gcc install
+ make config T=arm64-thunderx-linux-gcc install
#. Running testpmd:
@@ -83,7 +83,7 @@ following ``make`` command:
.. code-block:: console
- ./arm64-thunderx-linuxapp-gcc/app/testpmd -c 700 \
+ ./arm64-thunderx-linux-gcc/app/testpmd -c 700 \
--base-virtaddr=0x100000000000 \
--mbuf-pool-ops-name="octeontx_fpavf" \
--vdev='event_octeontx' \
diff --git a/doc/guides/nics/softnic.rst b/doc/guides/nics/softnic.rst
index 32a9cf22f..c8962d90b 100644
--- a/doc/guides/nics/softnic.rst
+++ b/doc/guides/nics/softnic.rst
@@ -54,7 +54,7 @@ Release Notes*.
Build options
-------------
-The default PMD configuration available in the common_linuxapp configuration file:
+The default PMD configuration available in the common_linux configuration file:
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y
@@ -347,7 +347,7 @@ commands.
.. code-block:: console
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 23-25 -n 4 \
+ ./x86_64-native-linux-gcc/app/testpmd -l 23-25 -n 4 \
--vdev 'net_softnic0, \
firmware=./drivers/net/softnic/ \
firmware.cli, \
diff --git a/doc/guides/nics/tap.rst b/doc/guides/nics/tap.rst
index 9a3d7b348..063bd0be4 100644
--- a/doc/guides/nics/tap.rst
+++ b/doc/guides/nics/tap.rst
@@ -181,7 +181,7 @@ used to build the dpdk you pulled down.
Run pktgen from the pktgen directory in a terminal with a commandline like the
following::
- sudo ./app/app/x86_64-native-linuxapp-gcc/app/pktgen -l 1-5 -n 4 \
+ sudo ./app/app/x86_64-native-linux-gcc/app/pktgen -l 1-5 -n 4 \
--proc-type auto --log-level debug --socket-mem 512,512 --file-prefix pg \
--vdev=net_tap0 --vdev=net_tap1 -b 05:00.0 -b 05:00.1 \
-b 04:00.0 -b 04:00.1 -b 04:00.2 -b 04:00.3 \
diff --git a/doc/guides/nics/thunderx.rst b/doc/guides/nics/thunderx.rst
index e84eaafe5..53eaec72a 100644
--- a/doc/guides/nics/thunderx.rst
+++ b/doc/guides/nics/thunderx.rst
@@ -70,7 +70,7 @@ Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and
for details.
To compile the ThunderX NICVF PMD for Linux arm64 gcc,
-use arm64-thunderx-linuxapp-gcc as target.
+use arm64-thunderx-linux-gcc as target.
Linux
-----
@@ -177,7 +177,7 @@ This section provides instructions to configure SR-IOV with Linux OS.
.. code-block:: console
- ./arm64-thunderx-linuxapp-gcc/app/testpmd -l 0-3 -n 4 -w 0002:01:00.2 \
+ ./arm64-thunderx-linux-gcc/app/testpmd -l 0-3 -n 4 -w 0002:01:00.2 \
-- -i --no-flush-rx \
--port-topology=loop
diff --git a/doc/guides/platform/octeontx.rst b/doc/guides/platform/octeontx.rst
index 3bde91f9d..7d1cb647d 100644
--- a/doc/guides/platform/octeontx.rst
+++ b/doc/guides/platform/octeontx.rst
@@ -95,7 +95,7 @@ drivers can be compiled with the following steps,
.. code-block:: console
cd <dpdk directory>
- make config T=arm64-thunderx-linuxapp-gcc
+ make config T=arm64-thunderx-linux-gcc
make
The example applications can be compiled using the following:
@@ -144,7 +144,7 @@ to build applications for **OCTEON TX** :sup:`®` platforms.
cd <dpdk directory>
export RTE_SDK=$PWD
export RTE_KERNELDIR=$THUNDER_ROOT/linux/kernel/linux
- make config T=arm64-thunderx-linuxapp-gcc
+ make config T=arm64-thunderx-linux-gcc
make -j CROSS=aarch64-thunderx-linux-gnu- CONFIG_RTE_KNI_KMOD=n CONFIG_RTE_EAL_IGB_UIO=n EXTRA_CFLAGS="-isystem <numa_install_dir>/include" EXTRA_LDFLAGS="-L<numa_install_dir>/lib -lnuma"
If NUMA support is not required, it can be disabled as explained in
@@ -154,7 +154,7 @@ Following steps could be used in that case.
.. code-block:: console
- make config T=arm64-thunderx-linuxapp-gcc
+ make config T=arm64-thunderx-linux-gcc
make CROSS=aarch64-thunderx-linux-gnu-
diff --git a/doc/guides/prog_guide/build_app.rst b/doc/guides/prog_guide/build_app.rst
index fa6aa8a2f..bffa55bbe 100644
--- a/doc/guides/prog_guide/build_app.rst
+++ b/doc/guides/prog_guide/build_app.rst
@@ -16,7 +16,7 @@ RTE_SDK and RTE_TARGET.
~/DPDK$ cd examples/helloworld/
~/DPDK/examples/helloworld$ export RTE_SDK=/home/user/DPDK
- ~/DPDK/examples/helloworld$ export RTE_TARGET=x86_64-native-linuxapp-gcc
+ ~/DPDK/examples/helloworld$ export RTE_TARGET=x86_64-native-linux-gcc
~/DPDK/examples/helloworld$ make
CC main.o
LD helloworld
@@ -40,7 +40,7 @@ The sample application (Hello World) can be duplicated in a new directory as a s
~$ cp -r DPDK/examples/helloworld my_rte_app
~$ cd my_rte_app/
~/my_rte_app$ export RTE_SDK=/home/user/DPDK
- ~/my_rte_app$ export RTE_TARGET=x86_64-native-linuxapp-gcc
+ ~/my_rte_app$ export RTE_TARGET=x86_64-native-linux-gcc
~/my_rte_app$ make
CC main.o
LD helloworld
diff --git a/doc/guides/prog_guide/dev_kit_build_system.rst b/doc/guides/prog_guide/dev_kit_build_system.rst
index 855b5da53..a0c923096 100644
--- a/doc/guides/prog_guide/dev_kit_build_system.rst
+++ b/doc/guides/prog_guide/dev_kit_build_system.rst
@@ -31,13 +31,13 @@ Each build directory contains include files, libraries, and applications.
A build directory is specific to a configuration that includes architecture + execution environment + toolchain.
It is possible to have several build directories sharing the same sources with different configurations.
-For instance, to create a new build directory called my_sdk_build_dir using the default configuration template config/defconfig_x86_64-linuxapp,
+For instance, to create a new build directory called my_sdk_build_dir using the default configuration template config/defconfig_x86_64-linux,
we use:
.. code-block:: console
cd ${RTE_SDK}
- make config T=x86_64-native-linuxapp-gcc O=my_sdk_build_dir
+ make config T=x86_64-native-linux-gcc O=my_sdk_build_dir
This creates a new my_sdk_build_dir directory. After that, we can compile by doing:
@@ -65,7 +65,7 @@ To compile an application, the user must set the RTE_SDK and RTE_TARGET environm
.. code-block:: console
export RTE_SDK=/opt/DPDK
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
cd /path/to/my_app
For a new application, the user must create their own Makefile that includes some .mk files, such as
@@ -248,7 +248,7 @@ Useful Variables Provided by the Build System
* RTE_TOOLCHAIN: Defines the toolchain (gcc , icc).
It is the same value as CONFIG_RTE_TOOLCHAIN but without the double-quotes around the string.
-* RTE_EXEC_ENV: Defines the executive environment (linuxapp).
+* RTE_EXEC_ENV: Defines the executive environment (linux).
It is the same value as CONFIG_RTE_EXEC_ENV but without the double-quotes around the string.
* RTE_KERNELDIR: This variable contains the absolute path to the kernel sources that will be used to compile the kernel modules.
diff --git a/doc/guides/prog_guide/dev_kit_root_make_help.rst b/doc/guides/prog_guide/dev_kit_root_make_help.rst
index 633161f09..a30db7d5b 100644
--- a/doc/guides/prog_guide/dev_kit_root_make_help.rst
+++ b/doc/guides/prog_guide/dev_kit_root_make_help.rst
@@ -27,7 +27,7 @@ This is an optional parameter, the default output directory is build.
.. code-block:: console
- make config O=mybuild T=x86_64-native-linuxapp-gcc
+ make config O=mybuild T=x86_64-native-linux-gcc
Build Targets
-------------
@@ -163,7 +163,7 @@ For instance, the following command:
.. code-block:: console
cd $(RTE_SDK)
- make config O=mybuild T=x86_64-native-linuxapp-gcc
+ make config O=mybuild T=x86_64-native-linux-gcc
make O=mybuild
is equivalent to:
@@ -171,7 +171,7 @@ is equivalent to:
.. code-block:: console
cd $(RTE_SDK)
- make config O=mybuild T=x86_64-native-linuxapp-gcc
+ make config O=mybuild T=x86_64-native-linux-gcc
cd mybuild
# no need to specify O= now
diff --git a/doc/guides/prog_guide/env_abstraction_layer.rst b/doc/guides/prog_guide/env_abstraction_layer.rst
index 8780928a6..3d78b4ebe 100644
--- a/doc/guides/prog_guide/env_abstraction_layer.rst
+++ b/doc/guides/prog_guide/env_abstraction_layer.rst
@@ -54,9 +54,9 @@ A check is also performed at initialization time to ensure that the micro archit
Then, the main() function is called. The core initialization and launch is done in rte_eal_init() (see the API documentation).
It consist of calls to the pthread library (more specifically, pthread_self(), pthread_create(), and pthread_setaffinity_np()).
-.. _figure_linuxapp_launch:
+.. _figure_linux_launch:
.. figure:: img/linuxapp_launch.*
EAL Initialization in a Linux Application Environment
@@ -79,7 +79,7 @@ API documentation for details.
Multi-process Support
~~~~~~~~~~~~~~~~~~~~~
-The Linuxapp EAL allows a multi-process as well as a multi-threaded (pthread) deployment model.
+The Linux EAL allows a multi-process as well as a multi-threaded (pthread) deployment model.
See chapter
:ref:`Multi-process Support <Multi-process_Support>` for more details.
diff --git a/doc/guides/prog_guide/ext_app_lib_make_help.rst b/doc/guides/prog_guide/ext_app_lib_make_help.rst
index 7e8e9fd3a..4312778dc 100644
--- a/doc/guides/prog_guide/ext_app_lib_make_help.rst
+++ b/doc/guides/prog_guide/ext_app_lib_make_help.rst
@@ -22,7 +22,7 @@ The following variables must be defined:
* ${RTE_SDK}: Points to the root directory of the DPDK.
-* ${RTE_TARGET}: Reference the target to be used for compilation (for example, x86_64-native-linuxapp-gcc).
+* ${RTE_TARGET}: Reference the target to be used for compilation (for example, x86_64-native-linux-gcc).
Build Targets
-------------
@@ -94,5 +94,5 @@ It is possible to run the Makefile from another directory, by specifying the out
.. code-block:: console
export RTE_SDK=/path/to/DPDK
- export RTE_TARGET=x86_64-native-linuxapp-icc
+ export RTE_TARGET=x86_64-native-linux-icc
make -f /path/to/my_app/Makefile S=/path/to/my_app O=/path/to/build_dir
diff --git a/doc/guides/prog_guide/extend_dpdk.rst b/doc/guides/prog_guide/extend_dpdk.rst
index 725994ee0..a3b3d300b 100644
--- a/doc/guides/prog_guide/extend_dpdk.rst
+++ b/doc/guides/prog_guide/extend_dpdk.rst
@@ -73,7 +73,7 @@ To add a new library to the DPDK, proceed as follows:
.. code-block:: console
cd ${RTE_SDK}
- make config T=x86_64-native-linuxapp-gcc
+ make config T=x86_64-native-linux-gcc
make
@@ -105,5 +105,5 @@ Once you have added a library, a new test case should be added in the test appli
.. code-block:: console
cd ${RTE_SDK}
- make config T=x86_64-native-linuxapp-gcc
+ make config T=x86_64-native-linux-gcc
make
diff --git a/doc/guides/prog_guide/glossary.rst b/doc/guides/prog_guide/glossary.rst
index dda45bd18..21063a414 100644
--- a/doc/guides/prog_guide/glossary.rst
+++ b/doc/guides/prog_guide/glossary.rst
@@ -205,7 +205,7 @@ SW
Target
In the DPDK, the target is a combination of architecture, machine,
executive environment and toolchain. For example:
- i686-native-linuxapp-gcc.
+ i686-native-linux-gcc.
TCP
Transmission Control Protocol
diff --git a/doc/guides/prog_guide/img/linuxapp_launch.svg b/doc/guides/prog_guide/img/linuxapp_launch.svg
index af685897d..3af560554 100644
--- a/doc/guides/prog_guide/img/linuxapp_launch.svg
+++ b/doc/guides/prog_guide/img/linuxapp_launch.svg
@@ -17,9 +17,9 @@
id="svg2"
sodipodi:version="0.32"
inkscape:version="0.48.4 r9939"
- sodipodi:docname="linuxapp_launch.svg"
+ sodipodi:docname="linux_launch.svg"
inkscape:output_extension="org.inkscape.output.svg.inkscape"
- inkscape:export-filename="/home/matz/rapports/doc/intel/architecture_docs/linuxapp_launch.png"
+ inkscape:export-filename="/home/matz/rapports/doc/intel/architecture_docs/linux_launch.png"
inkscape:export-xdpi="90"
inkscape:export-ydpi="90"
version="1.1">
diff --git a/doc/guides/prog_guide/intro.rst b/doc/guides/prog_guide/intro.rst
index be556a742..5b319d36d 100644
--- a/doc/guides/prog_guide/intro.rst
+++ b/doc/guides/prog_guide/intro.rst
@@ -31,7 +31,7 @@ The following is a list of DPDK documents in the suggested reading order:
* **Programmer's Guide** (this document): Describes:
* The software architecture and how to use it (through examples),
- specifically in a Linux* application (linuxapp) environment
+ specifically in a Linux* application (linux) environment
* The content of the DPDK, the build system
(including the commands that can be used in the root DPDK Makefile to build the development kit and an application)
diff --git a/doc/guides/prog_guide/overview.rst b/doc/guides/prog_guide/overview.rst
index c01f37e3c..986c89690 100644
--- a/doc/guides/prog_guide/overview.rst
+++ b/doc/guides/prog_guide/overview.rst
@@ -52,7 +52,7 @@ The following are examples of how the variables can be set:
.. code-block:: console
export RTE_SDK=/home/user/DPDK
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
See the *DPDK Getting Started Guide* for information on setting up the development environment.
diff --git a/doc/guides/prog_guide/profile_app.rst b/doc/guides/prog_guide/profile_app.rst
index 02f05614a..5af795c0d 100644
--- a/doc/guides/prog_guide/profile_app.rst
+++ b/doc/guides/prog_guide/profile_app.rst
@@ -84,7 +84,7 @@ an armv8 machine.
make
sudo insmod pmu_el0_cycle_counter.ko
cd $DPDK_DIR
- make config T=arm64-armv8a-linuxapp-gcc
+ make config T=arm64-armv8a-linux-gcc
echo "CONFIG_RTE_ARM_EAL_RDTSC_USE_PMU=y" >> build/.config
make
diff --git a/doc/guides/prog_guide/qos_framework.rst b/doc/guides/prog_guide/qos_framework.rst
index 0ce3cd58d..a7527b21c 100644
--- a/doc/guides/prog_guide/qos_framework.rst
+++ b/doc/guides/prog_guide/qos_framework.rst
@@ -1511,7 +1511,7 @@ To enable it, use the DPDK configuration parameter:
This parameter must be set to y.
The parameter is found in the build configuration files in the DPDK/config directory,
-for example, DPDK/config/common_linuxapp.
+for example, DPDK/config/common_linux.
RED configuration parameters are specified in the rte_red_params structure within the rte_sched_port_params structure
that is passed to the scheduler on initialization.
RED parameters are specified separately for four traffic classes and three packet colors (green, yellow and red)
diff --git a/doc/guides/rawdevs/dpaa2_cmdif.rst b/doc/guides/rawdevs/dpaa2_cmdif.rst
index bebda8333..6db06777c 100644
--- a/doc/guides/rawdevs/dpaa2_cmdif.rst
+++ b/doc/guides/rawdevs/dpaa2_cmdif.rst
@@ -77,7 +77,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-dpaa2-linuxapp-gcc install
+ make config T=arm64-dpaa2-linux-gcc install
Initialization
--------------
diff --git a/doc/guides/rawdevs/dpaa2_qdma.rst b/doc/guides/rawdevs/dpaa2_qdma.rst
index 793a8513f..359e4c69f 100644
--- a/doc/guides/rawdevs/dpaa2_qdma.rst
+++ b/doc/guides/rawdevs/dpaa2_qdma.rst
@@ -81,7 +81,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-dpaa2-linuxapp-gcc install
+ make config T=arm64-dpaa2-linux-gcc install
Initialization
--------------
diff --git a/doc/guides/rel_notes/release_19_02.rst b/doc/guides/rel_notes/release_19_02.rst
index 6bacbdb8f..b353620b7 100644
--- a/doc/guides/rel_notes/release_19_02.rst
+++ b/doc/guides/rel_notes/release_19_02.rst
@@ -110,7 +110,7 @@ New Features
* Added static linkage of ``mlx`` dependency.
* Improved stability of E-Switch flow driver.
* Added new make build configuration to set the cacheline size for Bluefield
- correctly - ``arm64-bluefield-linuxapp-gcc``.
+ correctly - ``arm64-bluefield-linux-gcc``.
* **Updated the enic driver.**
diff --git a/doc/guides/rel_notes/release_2_1.rst b/doc/guides/rel_notes/release_2_1.rst
index 0c27826f9..beadc51ba 100644
--- a/doc/guides/rel_notes/release_2_1.rst
+++ b/doc/guides/rel_notes/release_2_1.rst
@@ -70,7 +70,7 @@ New Features
* In UIO, the RX interrupt shares the same vector with other
interrupts. When the RX interrupt and LSC interrupt are both enabled, only
the former is available.
- * RX interrupt is only implemented for the linuxapp target.
+ * RX interrupt is only implemented for the linux target.
* The feature is only currently enabled for tow PMDs: ixgbe and igb.
diff --git a/doc/guides/sample_app_ug/bbdev_app.rst b/doc/guides/sample_app_ug/bbdev_app.rst
index 653f972f3..40a3264ab 100644
--- a/doc/guides/sample_app_ug/bbdev_app.rst
+++ b/doc/guides/sample_app_ug/bbdev_app.rst
@@ -46,7 +46,7 @@ Compiling the Application
.. code-block:: console
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
See the *DPDK Getting Started Guide* for possible RTE_TARGET values.
@@ -78,7 +78,7 @@ the specified baseband operation are available on application initialization.
This means that HW baseband device/s must be bound to a DPDK driver or
a SW baseband device/s (virtual BBdev) must be created (using --vdev).
-To run the application in linuxapp environment with the turbo_sw baseband device
+To run the application in linux environment with the turbo_sw baseband device
using the whitelisted port running on 1 encoding lcore and 1 decoding lcore
issue the command:
@@ -116,7 +116,7 @@ ports.
.. code-block:: console
- $ ./pktgen-3.4.0/app/x86_64-native-linuxapp-gcc/pktgen -c 0x3 \
+ $ ./pktgen-3.4.0/app/x86_64-native-linux-gcc/pktgen -c 0x3 \
--socket-mem=1,1 --file-prefix=pg -w <NIC1PCIADDR> -- -m 1.0 -P
where:
diff --git a/doc/guides/sample_app_ug/cmd_line.rst b/doc/guides/sample_app_ug/cmd_line.rst
index b38a5b335..828a607be 100644
--- a/doc/guides/sample_app_ug/cmd_line.rst
+++ b/doc/guides/sample_app_ug/cmd_line.rst
@@ -48,7 +48,7 @@ The application is located in the ``cmd_line`` sub-directory.
Running the Application
-----------------------
-To run the application in linuxapp environment, issue the following command:
+To run the application in linux environment, issue the following command:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/dist_app.rst b/doc/guides/sample_app_ug/dist_app.rst
index 1f68d081c..abfdd2c5e 100644
--- a/doc/guides/sample_app_ug/dist_app.rst
+++ b/doc/guides/sample_app_ug/dist_app.rst
@@ -46,7 +46,7 @@ Running the Application
* -p PORTMASK: Hexadecimal bitmask of ports to configure
-#. To run the application in linuxapp environment with 10 lcores, 4 ports,
+#. To run the application in linux environment with 10 lcores, 4 ports,
issue the command:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/fips_validation.rst b/doc/guides/sample_app_ug/fips_validation.rst
index aeacfacb7..2953fddeb 100644
--- a/doc/guides/sample_app_ug/fips_validation.rst
+++ b/doc/guides/sample_app_ug/fips_validation.rst
@@ -112,7 +112,7 @@ where,
are folder paths.
-To run the application in linuxapp environment to test one AES FIPS test data
+To run the application in linux environment to test one AES FIPS test data
file for crypto_aesni_mb PMD, issue the command:
.. code-block:: console
@@ -121,7 +121,7 @@ file for crypto_aesni_mb PMD, issue the command:
--req-file /PATH/TO/REQUEST/FILE.req --rsp-file ./PATH/TO/RESPONSE/FILE.rsp
--cryptodev crypto_aesni_mb
-To run the application in linuxapp environment to test all AES-GCM FIPS test
+To run the application in linux environment to test all AES-GCM FIPS test
data files in one folder for crypto_aesni_gcm PMD, issue the command:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/flow_classify.rst b/doc/guides/sample_app_ug/flow_classify.rst
index 003ed0356..a6383b3c7 100644
--- a/doc/guides/sample_app_ug/flow_classify.rst
+++ b/doc/guides/sample_app_ug/flow_classify.rst
@@ -24,7 +24,7 @@ The application is located in the ``flow_classify`` sub-directory.
Running the Application
-----------------------
-To run the example in a ``linuxapp`` environment:
+To run the example in a ``linux`` environment:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/flow_filtering.rst b/doc/guides/sample_app_ug/flow_filtering.rst
index 9dba85acf..be3d63f90 100644
--- a/doc/guides/sample_app_ug/flow_filtering.rst
+++ b/doc/guides/sample_app_ug/flow_filtering.rst
@@ -26,7 +26,7 @@ Set the target, for example:
.. code-block:: console
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
See the *DPDK Getting Started* Guide for possible ``RTE_TARGET`` values.
@@ -40,7 +40,7 @@ Build the application as follows:
Running the Application
-----------------------
-To run the example in a ``linuxapp`` environment:
+To run the example in a ``linux`` environment:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/hello_world.rst b/doc/guides/sample_app_ug/hello_world.rst
index a2051f799..c0e0a1549 100644
--- a/doc/guides/sample_app_ug/hello_world.rst
+++ b/doc/guides/sample_app_ug/hello_world.rst
@@ -17,7 +17,7 @@ The application is located in the ``helloworld`` sub-directory.
Running the Application
-----------------------
-To run the example in a linuxapp environment:
+To run the example in a linux environment:
.. code-block:: console
@@ -48,7 +48,7 @@ This is done in the main() function using the following code:
if (ret < 0)
rte_panic("Cannot init EAL\n");
-This call finishes the initialization process that was started before main() is called (in case of a Linuxapp environment).
+This call finishes the initialization process that was started before main() is called (in case of a Linux environment).
The argc and argv arguments are provided to the rte_eal_init() function.
The value returned is the number of parsed arguments.
diff --git a/doc/guides/sample_app_ug/ip_frag.rst b/doc/guides/sample_app_ug/ip_frag.rst
index 7914a977a..2583f0c3d 100644
--- a/doc/guides/sample_app_ug/ip_frag.rst
+++ b/doc/guides/sample_app_ug/ip_frag.rst
@@ -61,7 +61,7 @@ where:
* -q NQ is the number of queue (=ports) per lcore (the default is 1)
-To run the example in linuxapp environment with 2 lcores (2,4) over 2 ports(0,2) with 1 RX queue per lcore:
+To run the example in linux environment with 2 lcores (2,4) over 2 ports(0,2) with 1 RX queue per lcore:
.. code-block:: console
@@ -90,7 +90,7 @@ To run the example in linuxapp environment with 2 lcores (2,4) over 2 ports(0,2)
IP_FRAG: entering main loop on lcore 2
IP_FRAG: -- lcoreid=2 portid=0
-To run the example in linuxapp environment with 1 lcore (4) over 2 ports(0,2) with 2 RX queues per lcore:
+To run the example in linux environment with 1 lcore (4) over 2 ports(0,2) with 2 RX queues per lcore:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/ip_reassembly.rst b/doc/guides/sample_app_ug/ip_reassembly.rst
index e1b56d7be..a628b63cb 100644
--- a/doc/guides/sample_app_ug/ip_reassembly.rst
+++ b/doc/guides/sample_app_ug/ip_reassembly.rst
@@ -57,7 +57,7 @@ where:
then they are considered as invalid and will be dropped.
Valid range is 1ms - 3600s. Default value: 1s.
-To run the example in linuxapp environment with 2 lcores (2,4) over 2 ports(0,2) with 1 RX queue per lcore:
+To run the example in linux environment with 2 lcores (2,4) over 2 ports(0,2) with 1 RX queue per lcore:
.. code-block:: console
@@ -88,7 +88,7 @@ To run the example in linuxapp environment with 2 lcores (2,4) over 2 ports(0,2)
IP_RSMBL: entering main loop on lcore 2
IP_RSMBL: -- lcoreid=2 portid=0
-To run the example in linuxapp environment with 1 lcore (4) over 2 ports(0,2) with 2 RX queues per lcore:
+To run the example in linux environment with 1 lcore (4) over 2 ports(0,2) with 2 RX queues per lcore:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/keep_alive.rst b/doc/guides/sample_app_ug/keep_alive.rst
index 5ceaa442d..865ba69e5 100644
--- a/doc/guides/sample_app_ug/keep_alive.rst
+++ b/doc/guides/sample_app_ug/keep_alive.rst
@@ -63,7 +63,7 @@ where,
* ``T PERIOD``: statistics will be refreshed each PERIOD seconds (0 to
disable, 10 default, 86400 maximum).
-To run the application in linuxapp environment with 4 lcores, 16 ports
+To run the application in linux environment with 4 lcores, 16 ports
8 RX queues per lcore and a ping interval of 10ms, issue the command:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/kernel_nic_interface.rst b/doc/guides/sample_app_ug/kernel_nic_interface.rst
index 6acdf0fff..f8fe17bd0 100644
--- a/doc/guides/sample_app_ug/kernel_nic_interface.rst
+++ b/doc/guides/sample_app_ug/kernel_nic_interface.rst
@@ -87,7 +87,7 @@ The application is located in the ``examples/kni`` sub-directory.
.. note::
- This application is intended as a linuxapp only.
+ This application is intended as a linux only.
Running the kni Example Application
-----------------------------------
diff --git a/doc/guides/sample_app_ug/l2_forward_cat.rst b/doc/guides/sample_app_ug/l2_forward_cat.rst
index 4ee877b4d..0a813200b 100644
--- a/doc/guides/sample_app_ug/l2_forward_cat.rst
+++ b/doc/guides/sample_app_ug/l2_forward_cat.rst
@@ -66,7 +66,7 @@ The application is located in the ``l2fwd-cat`` sub-directory.
Running the Application
-----------------------
-To run the example in a ``linuxapp`` environment and enable CAT on cpus 0-2:
+To run the example in a ``linux`` environment and enable CAT on cpus 0-2:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/l2_forward_crypto.rst b/doc/guides/sample_app_ug/l2_forward_crypto.rst
index 855afd8fc..e8d52dad2 100644
--- a/doc/guides/sample_app_ug/l2_forward_crypto.rst
+++ b/doc/guides/sample_app_ug/l2_forward_crypto.rst
@@ -158,7 +158,7 @@ the specified crypto operation are available on application initialization.
This means that HW crypto device/s must be bound to a DPDK driver or
a SW crypto device/s (virtual crypto PMD) must be created (using --vdev).
-To run the application in linuxapp environment with 2 lcores, 2 ports and 2 crypto devices, issue the command:
+To run the application in linux environment with 2 lcores, 2 ports and 2 crypto devices, issue the command:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/l2_forward_job_stats.rst b/doc/guides/sample_app_ug/l2_forward_job_stats.rst
index ba73d8557..dfc1ed9ca 100644
--- a/doc/guides/sample_app_ug/l2_forward_job_stats.rst
+++ b/doc/guides/sample_app_ug/l2_forward_job_stats.rst
@@ -91,7 +91,7 @@ where,
* l: Use locale thousands separator when formatting big numbers.
-To run the application in linuxapp environment with 4 lcores, 16 ports, 8 RX queues per lcore and
+To run the application in linux environment with 4 lcores, 16 ports, 8 RX queues per lcore and
thousands separator printing, issue the command:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/l2_forward_real_virtual.rst b/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
index 2b2d5afa0..e5b28e425 100644
--- a/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
+++ b/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
@@ -101,7 +101,7 @@ where,
* --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default).
-To run the application in linuxapp environment with 4 lcores, 16 ports and 8 RX queues per lcore and MAC address
+To run the application in linux environment with 4 lcores, 16 ports and 8 RX queues per lcore and MAC address
updating enabled, issue the command:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/link_status_intr.rst b/doc/guides/sample_app_ug/link_status_intr.rst
index 695c088e8..571cd2d60 100644
--- a/doc/guides/sample_app_ug/link_status_intr.rst
+++ b/doc/guides/sample_app_ug/link_status_intr.rst
@@ -49,7 +49,7 @@ where,
* -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default)
-To run the application in a linuxapp environment with 4 lcores, 4 memory channels, 16 ports and 8 RX queues per lcore,
+To run the application in a linux environment with 4 lcores, 4 memory channels, 16 ports and 8 RX queues per lcore,
issue the command:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/netmap_compatibility.rst b/doc/guides/sample_app_ug/netmap_compatibility.rst
index 33b1cc214..219613e2a 100644
--- a/doc/guides/sample_app_ug/netmap_compatibility.rst
+++ b/doc/guides/sample_app_ug/netmap_compatibility.rst
@@ -117,7 +117,7 @@ where,
If two ``-i`` parameters are given, the two interfaces form a bridge,
where traffic received on one interface is replicated and sent to the other interface.
-For example, to run the application in a linuxapp environment using port 0 and 2:
+For example, to run the application in a linux environment using port 0 and 2:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/performance_thread.rst b/doc/guides/sample_app_ug/performance_thread.rst
index fbd30a5ea..e2c04efcc 100644
--- a/doc/guides/sample_app_ug/performance_thread.rst
+++ b/doc/guides/sample_app_ug/performance_thread.rst
@@ -1158,7 +1158,7 @@ To build and run the pthread shim example
.. code-block:: console
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
See the DPDK Getting Started Guide for possible RTE_TARGET values.
diff --git a/doc/guides/sample_app_ug/ptpclient.rst b/doc/guides/sample_app_ug/ptpclient.rst
index 53de50374..9d7446d5f 100644
--- a/doc/guides/sample_app_ug/ptpclient.rst
+++ b/doc/guides/sample_app_ug/ptpclient.rst
@@ -58,7 +58,7 @@ To compile the sample application see :doc:`compiling`.
The application is located in the ``ptpclient`` sub-directory.
.. note::
- To compile the application edit the ``config/common_linuxapp`` configuration file to enable IEEE1588
+ To compile the application edit the ``config/common_linux`` configuration file to enable IEEE1588
and then recompile DPDK:
.. code-block:: console
@@ -68,7 +68,7 @@ The application is located in the ``ptpclient`` sub-directory.
Running the Application
-----------------------
-To run the example in a ``linuxapp`` environment:
+To run the example in a ``linux`` environment:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/qos_scheduler.rst b/doc/guides/sample_app_ug/qos_scheduler.rst
index d6c3bc6c7..cdd29d90c 100644
--- a/doc/guides/sample_app_ug/qos_scheduler.rst
+++ b/doc/guides/sample_app_ug/qos_scheduler.rst
@@ -37,7 +37,7 @@ The application is located in the ``qos_sched`` sub-directory.
.. note::
- This application is intended as a linuxapp only.
+ This application is intended as a linux only.
.. note::
diff --git a/doc/guides/sample_app_ug/quota_watermark.rst b/doc/guides/sample_app_ug/quota_watermark.rst
index 67200e15d..125e6fb73 100644
--- a/doc/guides/sample_app_ug/quota_watermark.rst
+++ b/doc/guides/sample_app_ug/quota_watermark.rst
@@ -88,7 +88,7 @@ where,
-p PORTMASK: A hexadecimal bitmask of the ports to configure
-To run the application in a linuxapp environment with four logical cores and ports 0 and 2,
+To run the application in a linux environment with four logical cores and ports 0 and 2,
issue the following command:
.. code-block:: console
@@ -110,7 +110,7 @@ The control application requires a number of command line options:
The --proc-type=secondary option is necessary for the EAL to properly initialize the control application to
use the same huge pages as the core application and thus be able to access its rings.
-To run the application in a linuxapp environment on logical core 0, issue the following command:
+To run the application in a linux environment on logical core 0, issue the following command:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/rxtx_callbacks.rst b/doc/guides/sample_app_ug/rxtx_callbacks.rst
index 85d96d8a2..81463d28d 100644
--- a/doc/guides/sample_app_ug/rxtx_callbacks.rst
+++ b/doc/guides/sample_app_ug/rxtx_callbacks.rst
@@ -32,7 +32,7 @@ target. This is generally on by default:
Running the Application
-----------------------
-To run the example in a ``linuxapp`` environment:
+To run the example in a ``linux`` environment:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/service_cores.rst b/doc/guides/sample_app_ug/service_cores.rst
index b8339e70b..cd0f4717a 100644
--- a/doc/guides/sample_app_ug/service_cores.rst
+++ b/doc/guides/sample_app_ug/service_cores.rst
@@ -31,7 +31,7 @@ Compiling the Application
.. code-block:: console
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
See the *DPDK Getting Started* Guide for possible RTE_TARGET values.
diff --git a/doc/guides/sample_app_ug/skeleton.rst b/doc/guides/sample_app_ug/skeleton.rst
index 959561716..11ee521b3 100644
--- a/doc/guides/sample_app_ug/skeleton.rst
+++ b/doc/guides/sample_app_ug/skeleton.rst
@@ -21,7 +21,7 @@ The application is located in the ``skeleton`` sub-directory.
Running the Application
-----------------------
-To run the example in a ``linuxapp`` environment:
+To run the example in a ``linux`` environment:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/tep_termination.rst b/doc/guides/sample_app_ug/tep_termination.rst
index b3332977b..df159355d 100644
--- a/doc/guides/sample_app_ug/tep_termination.rst
+++ b/doc/guides/sample_app_ug/tep_termination.rst
@@ -94,7 +94,7 @@ Compiling the Sample Code
-------------------------
To enable vhost, turn on vhost library in the configure file
-``config/common_linuxapp``.
+``config/common_linux``.
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/timer.rst b/doc/guides/sample_app_ug/timer.rst
index d87a7abc1..87dfb4c1f 100644
--- a/doc/guides/sample_app_ug/timer.rst
+++ b/doc/guides/sample_app_ug/timer.rst
@@ -17,7 +17,7 @@ The application is located in the ``timer`` sub-directory.
Running the Application
-----------------------
-To run the example in linuxapp environment:
+To run the example in linux environment:
.. code-block:: console
diff --git a/doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst b/doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst
index 0e9da9707..707afe91a 100644
--- a/doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst
+++ b/doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst
@@ -68,7 +68,7 @@ The application is located in the ``vmdq_dcb`` sub-directory.
Running the Application
-----------------------
-To run the example in a linuxapp environment:
+To run the example in a linux environment:
.. code-block:: console
@@ -250,7 +250,7 @@ See :doc:`l2_forward_real_virtual` for more information.
Statistics Display
~~~~~~~~~~~~~~~~~~
-When run in a linuxapp environment,
+When run in a linux environment,
the VMDQ and DCB Forwarding sample application can display statistics showing the number of packets read from each RX queue.
This is provided by way of a signal handler for the SIGHUP signal,
which simply prints to standard output the packet counts in grid form.
diff --git a/doc/guides/testpmd_app_ug/build_app.rst b/doc/guides/testpmd_app_ug/build_app.rst
index 45a8395e0..d1ca9f3d1 100644
--- a/doc/guides/testpmd_app_ug/build_app.rst
+++ b/doc/guides/testpmd_app_ug/build_app.rst
@@ -19,7 +19,7 @@ The basic compilation steps are:
.. code-block:: console
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
#. Build the application:
diff --git a/doc/guides/tools/testbbdev.rst b/doc/guides/tools/testbbdev.rst
index 5caa90239..f3386472d 100644
--- a/doc/guides/tools/testbbdev.rst
+++ b/doc/guides/tools/testbbdev.rst
@@ -227,7 +227,7 @@ Running Tests
-------------
Shortened tree of isg_cid-wireless_dpdk_ae with dpdk compiled for
-x86_64-native-linuxapp-icc target:
+x86_64-native-linux-icc target:
::
@@ -256,7 +256,7 @@ x86_64-native-linuxapp-icc target:
|-- turbo_enc_c1_k40_r0_e1194_rm.data
|-- turbo_enc_c1_k6144_r0_e32256_crc24b_rm.data
- |-- x86_64-native-linuxapp-icc
+ |-- x86_64-native-linux-icc
|-- app
|-- testbbdev
@@ -265,7 +265,7 @@ All bbdev devices
.. code-block:: console
- ./test-bbdev.py -p ../../x86_64-native-linuxapp-icc/app/testbbdev
+ ./test-bbdev.py -p ../../x86_64-native-linux-icc/app/testbbdev
-v turbo_dec_default.data
It runs all available tests using the test vector filled based on
@@ -279,7 +279,7 @@ baseband turbo_sw device
.. code-block:: console
- ./test-bbdev.py -p ../../x86_64-native-linuxapp-icc/app/testbbdev
+ ./test-bbdev.py -p ../../x86_64-native-linux-icc/app/testbbdev
-e="--vdev=baseband_turbo_sw" -t 120 -c validation
-v ./test_vectors/turbo_* -n 64 -b 8 32
diff --git a/drivers/net/softnic/Makefile b/drivers/net/softnic/Makefile
index 484e76cd6..64885dd86 100644
--- a/drivers/net/softnic/Makefile
+++ b/drivers/net/softnic/Makefile
@@ -46,7 +46,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_SOFTNIC) += conn.c
SYMLINK-y-include += rte_eth_softnic.h
ifneq ($(CONFIG_RTE_EXEC_ENV),"linuxapp")
-$(info Softnic PMD can only operate in a linuxapp environment, \
+$(info Softnic PMD can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
clean:
diff --git a/examples/Makefile b/examples/Makefile
index 33fe0e586..c7a81f08d 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/bbdev_app/Makefile b/examples/bbdev_app/Makefile
index 18dd99db2..51abf82cf 100644
--- a/examples/bbdev_app/Makefile
+++ b/examples/bbdev_app/Makefile
@@ -46,7 +46,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/bond/Makefile b/examples/bond/Makefile
index d6e500aab..98a31d6b5 100644
--- a/examples/bond/Makefile
+++ b/examples/bond/Makefile
@@ -48,7 +48,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/cmdline/Makefile b/examples/cmdline/Makefile
index a617cce11..30a87626e 100644
--- a/examples/cmdline/Makefile
+++ b/examples/cmdline/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/distributor/Makefile b/examples/distributor/Makefile
index 05ea0bfec..0cda58a5b 100644
--- a/examples/distributor/Makefile
+++ b/examples/distributor/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/ethtool/Makefile b/examples/ethtool/Makefile
index 70a4f5dc9..27908bb63 100644
--- a/examples/ethtool/Makefile
+++ b/examples/ethtool/Makefile
@@ -6,12 +6,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overwritten by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
else
diff --git a/examples/ethtool/ethtool-app/Makefile b/examples/ethtool/ethtool-app/Makefile
index 9ecfc0b89..0dae20383 100644
--- a/examples/ethtool/ethtool-app/Makefile
+++ b/examples/ethtool/ethtool-app/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/ethtool/lib/Makefile b/examples/ethtool/lib/Makefile
index ee83b8769..70e00eee8 100644
--- a/examples/ethtool/lib/Makefile
+++ b/examples/ethtool/lib/Makefile
@@ -6,12 +6,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overwritten by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(error This application can only operate in a linuxapp environment, \
+$(error This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
endif
diff --git a/examples/eventdev_pipeline/Makefile b/examples/eventdev_pipeline/Makefile
index 1a789ccc3..238c41ea2 100644
--- a/examples/eventdev_pipeline/Makefile
+++ b/examples/eventdev_pipeline/Makefile
@@ -48,7 +48,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/exception_path/Makefile b/examples/exception_path/Makefile
index ae74781ec..1f08792ee 100644
--- a/examples/exception_path/Makefile
+++ b/examples/exception_path/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/fips_validation/Makefile b/examples/fips_validation/Makefile
index a7170d809..923d0be6e 100644
--- a/examples/fips_validation/Makefile
+++ b/examples/fips_validation/Makefile
@@ -52,7 +52,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
INC += $(sort $(wildcard *.h))
diff --git a/examples/flow_classify/Makefile b/examples/flow_classify/Makefile
index f1fa4df62..3a49f971c 100644
--- a/examples/flow_classify/Makefile
+++ b/examples/flow_classify/Makefile
@@ -46,7 +46,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/flow_filtering/Makefile b/examples/flow_filtering/Makefile
index 8f86b7b24..cc51ffdb8 100644
--- a/examples/flow_filtering/Makefile
+++ b/examples/flow_filtering/Makefile
@@ -42,7 +42,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/helloworld/Makefile b/examples/helloworld/Makefile
index d66b526b6..0b5374d03 100644
--- a/examples/helloworld/Makefile
+++ b/examples/helloworld/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/ip_fragmentation/Makefile b/examples/ip_fragmentation/Makefile
index 9e89e744c..fd186406c 100644
--- a/examples/ip_fragmentation/Makefile
+++ b/examples/ip_fragmentation/Makefile
@@ -45,7 +45,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/ip_pipeline/Makefile b/examples/ip_pipeline/Makefile
index 8b1744d0d..26d2c71b0 100644
--- a/examples/ip_pipeline/Makefile
+++ b/examples/ip_pipeline/Makefile
@@ -64,12 +64,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
clean:
diff --git a/examples/ip_reassembly/Makefile b/examples/ip_reassembly/Makefile
index 1e81315f2..672ffe384 100644
--- a/examples/ip_reassembly/Makefile
+++ b/examples/ip_reassembly/Makefile
@@ -45,7 +45,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/ipsec-secgw/Makefile b/examples/ipsec-secgw/Makefile
index 08f474da6..0236a74bf 100644
--- a/examples/ipsec-secgw/Makefile
+++ b/examples/ipsec-secgw/Makefile
@@ -57,7 +57,7 @@ ifeq ($(RTE_SDK),)
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/ipsec-secgw/test/common_defs.sh b/examples/ipsec-secgw/test/common_defs.sh
index 1ed31f89f..693c70cd1 100644
--- a/examples/ipsec-secgw/test/common_defs.sh
+++ b/examples/ipsec-secgw/test/common_defs.sh
@@ -45,7 +45,7 @@ REMOTE_IPV6=fd12:3456:789a:0031:0000:0000:0000:0014
LOCAL_IPV6=fd12:3456:789a:0031:0000:0000:0000:0092
DPDK_PATH=${RTE_SDK:-${PWD}}
-DPDK_BUILD=${RTE_TARGET:-x86_64-native-linuxapp-gcc}
+DPDK_BUILD=${RTE_TARGET:-x86_64-native-linux-gcc}
SGW_OUT_FILE=./ipsec-secgw.out1
diff --git a/examples/ipv4_multicast/Makefile b/examples/ipv4_multicast/Makefile
index a16c62333..ea7339aa9 100644
--- a/examples/ipv4_multicast/Makefile
+++ b/examples/ipv4_multicast/Makefile
@@ -45,7 +45,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/kni/Makefile b/examples/kni/Makefile
index 096ec4d97..e6d897f94 100644
--- a/examples/kni/Makefile
+++ b/examples/kni/Makefile
@@ -45,12 +45,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(error This application can only operate in a linuxapp environment, \
+$(error This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
endif
diff --git a/examples/l2fwd-cat/Makefile b/examples/l2fwd-cat/Makefile
index b6eeabde1..111247edb 100644
--- a/examples/l2fwd-cat/Makefile
+++ b/examples/l2fwd-cat/Makefile
@@ -50,7 +50,7 @@ $(error "Please define PQOS_INSTALL_PATH environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l2fwd-crypto/Makefile b/examples/l2fwd-crypto/Makefile
index 229fc2a89..84249a5cb 100644
--- a/examples/l2fwd-crypto/Makefile
+++ b/examples/l2fwd-crypto/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l2fwd-jobstats/Makefile b/examples/l2fwd-jobstats/Makefile
index 696a8b21a..cacec916e 100644
--- a/examples/l2fwd-jobstats/Makefile
+++ b/examples/l2fwd-jobstats/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l2fwd-keepalive/Makefile b/examples/l2fwd-keepalive/Makefile
index 4ab67db44..3d3f28e68 100644
--- a/examples/l2fwd-keepalive/Makefile
+++ b/examples/l2fwd-keepalive/Makefile
@@ -46,7 +46,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l2fwd-keepalive/ka-agent/Makefile b/examples/l2fwd-keepalive/ka-agent/Makefile
index ddb6e83f6..005b72c63 100644
--- a/examples/l2fwd-keepalive/ka-agent/Makefile
+++ b/examples/l2fwd-keepalive/ka-agent/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l2fwd/Makefile b/examples/l2fwd/Makefile
index a8a47ad4e..30866015b 100644
--- a/examples/l2fwd/Makefile
+++ b/examples/l2fwd/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l3fwd-acl/Makefile b/examples/l3fwd-acl/Makefile
index 285683f83..294c1f101 100644
--- a/examples/l3fwd-acl/Makefile
+++ b/examples/l3fwd-acl/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l3fwd-power/Makefile b/examples/l3fwd-power/Makefile
index 61f151c12..4c768380c 100644
--- a/examples/l3fwd-power/Makefile
+++ b/examples/l3fwd-power/Makefile
@@ -46,12 +46,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
else
diff --git a/examples/l3fwd-vf/Makefile b/examples/l3fwd-vf/Makefile
index dfb1d52d3..90f4f7fb3 100644
--- a/examples/l3fwd-vf/Makefile
+++ b/examples/l3fwd-vf/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/l3fwd/Makefile b/examples/l3fwd/Makefile
index cccdd9dfa..9fa7a448e 100644
--- a/examples/l3fwd/Makefile
+++ b/examples/l3fwd/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/link_status_interrupt/Makefile b/examples/link_status_interrupt/Makefile
index 160682123..65773f8c4 100644
--- a/examples/link_status_interrupt/Makefile
+++ b/examples/link_status_interrupt/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/load_balancer/Makefile b/examples/load_balancer/Makefile
index 197b019d5..280dfa97e 100644
--- a/examples/load_balancer/Makefile
+++ b/examples/load_balancer/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/Makefile b/examples/multi_process/Makefile
index 4514014a0..b0633df38 100644
--- a/examples/multi_process/Makefile
+++ b/examples/multi_process/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/client_server_mp/Makefile b/examples/multi_process/client_server_mp/Makefile
index 76f895175..f199faf1f 100644
--- a/examples/multi_process/client_server_mp/Makefile
+++ b/examples/multi_process/client_server_mp/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/client_server_mp/mp_server/Makefile b/examples/multi_process/client_server_mp/mp_server/Makefile
index 09ee270c0..ac18822b0 100644
--- a/examples/multi_process/client_server_mp/mp_server/Makefile
+++ b/examples/multi_process/client_server_mp/mp_server/Makefile
@@ -6,12 +6,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(error This application can only operate in a linuxapp environment, \
+$(error This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
endif
diff --git a/examples/multi_process/hotplug_mp/Makefile b/examples/multi_process/hotplug_mp/Makefile
index bc36aeaed..b5babf685 100644
--- a/examples/multi_process/hotplug_mp/Makefile
+++ b/examples/multi_process/hotplug_mp/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/simple_mp/Makefile b/examples/multi_process/simple_mp/Makefile
index fba9c8682..6657538a4 100644
--- a/examples/multi_process/simple_mp/Makefile
+++ b/examples/multi_process/simple_mp/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/multi_process/symmetric_mp/Makefile b/examples/multi_process/symmetric_mp/Makefile
index 6fb9cc366..9226690b1 100644
--- a/examples/multi_process/symmetric_mp/Makefile
+++ b/examples/multi_process/symmetric_mp/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/netmap_compat/Makefile b/examples/netmap_compat/Makefile
index dd87ac9bd..f2bf39e69 100644
--- a/examples/netmap_compat/Makefile
+++ b/examples/netmap_compat/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
unexport RTE_SRCDIR RTE_OUTPUT RTE_EXTMK
diff --git a/examples/netmap_compat/bridge/Makefile b/examples/netmap_compat/bridge/Makefile
index 4c8981acb..3e3ff0795 100644
--- a/examples/netmap_compat/bridge/Makefile
+++ b/examples/netmap_compat/bridge/Makefile
@@ -6,12 +6,12 @@ $(error "Please define the RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
clean:
diff --git a/examples/packet_ordering/Makefile b/examples/packet_ordering/Makefile
index 3cf1ee1dc..16781e762 100644
--- a/examples/packet_ordering/Makefile
+++ b/examples/packet_ordering/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/performance-thread/Makefile b/examples/performance-thread/Makefile
index 792ac661e..d63fcbbb9 100644
--- a/examples/performance-thread/Makefile
+++ b/examples/performance-thread/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/performance-thread/l3fwd-thread/Makefile b/examples/performance-thread/l3fwd-thread/Makefile
index 5558043f2..7bc0fef82 100644
--- a/examples/performance-thread/l3fwd-thread/Makefile
+++ b/examples/performance-thread/l3fwd-thread/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/performance-thread/pthread_shim/Makefile b/examples/performance-thread/pthread_shim/Makefile
index a6d276a49..731aef637 100644
--- a/examples/performance-thread/pthread_shim/Makefile
+++ b/examples/performance-thread/pthread_shim/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/ptpclient/Makefile b/examples/ptpclient/Makefile
index 989e2dd40..99c817ffd 100644
--- a/examples/ptpclient/Makefile
+++ b/examples/ptpclient/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriddegitn by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/qos_meter/Makefile b/examples/qos_meter/Makefile
index 46341b1a7..fe44e6418 100644
--- a/examples/qos_meter/Makefile
+++ b/examples/qos_meter/Makefile
@@ -46,7 +46,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/qos_sched/Makefile b/examples/qos_sched/Makefile
index e0d298345..44df68ab8 100644
--- a/examples/qos_sched/Makefile
+++ b/examples/qos_sched/Makefile
@@ -44,12 +44,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
clean:
diff --git a/examples/quota_watermark/Makefile b/examples/quota_watermark/Makefile
index ec7d989ae..6a20cba0c 100644
--- a/examples/quota_watermark/Makefile
+++ b/examples/quota_watermark/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/quota_watermark/qw/Makefile b/examples/quota_watermark/qw/Makefile
index 84299e594..9971acc41 100644
--- a/examples/quota_watermark/qw/Makefile
+++ b/examples/quota_watermark/qw/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/quota_watermark/qwctl/Makefile b/examples/quota_watermark/qwctl/Makefile
index b390128e7..b3640f7d4 100644
--- a/examples/quota_watermark/qwctl/Makefile
+++ b/examples/quota_watermark/qwctl/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/rxtx_callbacks/Makefile b/examples/rxtx_callbacks/Makefile
index e9d30d56f..5154089de 100644
--- a/examples/rxtx_callbacks/Makefile
+++ b/examples/rxtx_callbacks/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/server_node_efd/Makefile b/examples/server_node_efd/Makefile
index de90253fe..0e0896609 100644
--- a/examples/server_node_efd/Makefile
+++ b/examples/server_node_efd/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/server_node_efd/server/Makefile b/examples/server_node_efd/server/Makefile
index 1ca958abb..2906261dd 100644
--- a/examples/server_node_efd/server/Makefile
+++ b/examples/server_node_efd/server/Makefile
@@ -6,12 +6,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(error This application can only operate in a linuxapp environment, \
+$(error This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
endif
diff --git a/examples/service_cores/Makefile b/examples/service_cores/Makefile
index a4d6b7b44..d38acd53a 100644
--- a/examples/service_cores/Makefile
+++ b/examples/service_cores/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/skeleton/Makefile b/examples/skeleton/Makefile
index bd980ec9b..5e2742ec6 100644
--- a/examples/skeleton/Makefile
+++ b/examples/skeleton/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/tep_termination/Makefile b/examples/tep_termination/Makefile
index 44af6ca52..f5303bacb 100644
--- a/examples/tep_termination/Makefile
+++ b/examples/tep_termination/Makefile
@@ -48,12 +48,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(error This application can only operate in a linuxapp environment, \
+$(error This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
endif
diff --git a/examples/timer/Makefile b/examples/timer/Makefile
index 42b23f28e..daed94d29 100644
--- a/examples/timer/Makefile
+++ b/examples/timer/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/vdpa/Makefile b/examples/vdpa/Makefile
index 42672a2bc..b28378f0c 100644
--- a/examples/vdpa/Makefile
+++ b/examples/vdpa/Makefile
@@ -6,12 +6,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV),"linuxapp")
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
else
diff --git a/examples/vhost/Makefile b/examples/vhost/Makefile
index 540ccaaee..d58d002ba 100644
--- a/examples/vhost/Makefile
+++ b/examples/vhost/Makefile
@@ -48,12 +48,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
else
diff --git a/examples/vhost_crypto/Makefile b/examples/vhost_crypto/Makefile
index 719cc5595..80403a5e9 100644
--- a/examples/vhost_crypto/Makefile
+++ b/examples/vhost_crypto/Makefile
@@ -6,12 +6,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
else
diff --git a/examples/vhost_scsi/Makefile b/examples/vhost_scsi/Makefile
index 3392d24b2..58ff7a25c 100644
--- a/examples/vhost_scsi/Makefile
+++ b/examples/vhost_scsi/Makefile
@@ -47,12 +47,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
else
diff --git a/examples/vm_power_manager/Makefile b/examples/vm_power_manager/Makefile
index 50147c05d..e608bb61a 100644
--- a/examples/vm_power_manager/Makefile
+++ b/examples/vm_power_manager/Makefile
@@ -10,7 +10,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/vm_power_manager/guest_cli/Makefile b/examples/vm_power_manager/guest_cli/Makefile
index 8b1db861e..a5634eacf 100644
--- a/examples/vm_power_manager/guest_cli/Makefile
+++ b/examples/vm_power_manager/guest_cli/Makefile
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/vmdq/Makefile b/examples/vmdq/Makefile
index 87abeab93..09ff070a8 100644
--- a/examples/vmdq/Makefile
+++ b/examples/vmdq/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/examples/vmdq_dcb/Makefile b/examples/vmdq_dcb/Makefile
index bf161cb2b..436ccb9c1 100644
--- a/examples/vmdq_dcb/Makefile
+++ b/examples/vmdq_dcb/Makefile
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
diff --git a/lib/librte_eal/common/include/rte_debug.h b/lib/librte_eal/common/include/rte_debug.h
index 272df494c..748d32c80 100644
--- a/lib/librte_eal/common/include/rte_debug.h
+++ b/lib/librte_eal/common/include/rte_debug.h
@@ -39,7 +39,7 @@ void rte_dump_registers(void);
*
* Display the format string and its expanded arguments (printf-like).
*
- * In a linuxapp environment, this function dumps the stack and calls
+ * In a linux environment, this function dumps the stack and calls
* abort() resulting in a core dump if enabled.
*
* The function never returns.
diff --git a/lib/librte_eal/common/include/rte_eal.h b/lib/librte_eal/common/include/rte_eal.h
index a0cedd573..833433229 100644
--- a/lib/librte_eal/common/include/rte_eal.h
+++ b/lib/librte_eal/common/include/rte_eal.h
@@ -41,7 +41,7 @@ enum rte_lcore_role_t {
};
/**
- * The type of process in a linuxapp, multi-process setup
+ * The type of process in a linux, multi-process setup
*/
enum rte_proc_type_t {
RTE_PROC_AUTO = -1, /* allow auto-detection of primary/secondary */
diff --git a/lib/librte_eal/freebsd/eal/Makefile b/lib/librte_eal/freebsd/eal/Makefile
index aa4b9ef8e..8e9450c26 100644
--- a/lib/librte_eal/freebsd/eal/Makefile
+++ b/lib/librte_eal/freebsd/eal/Makefile
@@ -24,7 +24,7 @@ EXPORT_MAP := ../../rte_eal_version.map
LIBABIVER := 9
-# specific to bsdapp exec-env
+# specific to freebsd exec-env
SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) := eal.c
SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_cpuflags.c
SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_memory.c
@@ -86,7 +86,7 @@ CFLAGS_eal_thread.o += -Wno-return-type
CFLAGS_eal_hpet.o += -Wno-return-type
endif
-INC := # no bsdapp specific headers
+INC := # no bsd specific headers
SYMLINK-$(CONFIG_RTE_EXEC_ENV_FREEBSD)-include/exec-env := \
$(addprefix include/exec-env/,$(INC))
diff --git a/lib/librte_eal/linux/eal/Makefile b/lib/librte_eal/linux/eal/Makefile
index 9e32f1174..e5e668cd0 100644
--- a/lib/librte_eal/linux/eal/Makefile
+++ b/lib/librte_eal/linux/eal/Makefile
@@ -29,7 +29,7 @@ ifeq ($(CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES),y)
LDLIBS += -lnuma
endif
-# specific to linuxapp exec-env
+# specific to linux exec-env
SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) := eal.c
SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_cpuflags.c
SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_hugepage_info.c
diff --git a/mk/exec-env/bsdapp b/mk/exec-env/bsdapp
new file mode 120000
index 000000000..69f5cba2c
--- /dev/null
+++ b/mk/exec-env/bsdapp
@@ -0,0 +1 @@
+freebsd/
\ No newline at end of file
diff --git a/mk/exec-env/bsdapp/rte.app.mk b/mk/exec-env/freebsd/rte.app.mk
similarity index 100%
rename from mk/exec-env/bsdapp/rte.app.mk
rename to mk/exec-env/freebsd/rte.app.mk
diff --git a/mk/exec-env/bsdapp/rte.vars.mk b/mk/exec-env/freebsd/rte.vars.mk
similarity index 94%
rename from mk/exec-env/bsdapp/rte.vars.mk
rename to mk/exec-env/freebsd/rte.vars.mk
index cec08840b..c6be560b3 100644
--- a/mk/exec-env/bsdapp/rte.vars.mk
+++ b/mk/exec-env/freebsd/rte.vars.mk
@@ -9,7 +9,7 @@
# - define EXECENV_ASFLAGS variable (overridden by cmdline)
# - may override any previously defined variable
#
-# examples for RTE_EXEC_ENV: linuxapp, bsdapp
+# examples for RTE_EXEC_ENV: linux, freebsd
#
ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),y)
EXECENV_CFLAGS = -pthread -fPIC
diff --git a/mk/exec-env/linuxapp/rte.app.mk b/mk/exec-env/linux/rte.app.mk
similarity index 100%
rename from mk/exec-env/linuxapp/rte.app.mk
rename to mk/exec-env/linux/rte.app.mk
diff --git a/mk/exec-env/linuxapp/rte.vars.mk b/mk/exec-env/linux/rte.vars.mk
similarity index 95%
rename from mk/exec-env/linuxapp/rte.vars.mk
rename to mk/exec-env/linux/rte.vars.mk
index 57ee82150..d04d0e29c 100644
--- a/mk/exec-env/linuxapp/rte.vars.mk
+++ b/mk/exec-env/linux/rte.vars.mk
@@ -9,7 +9,7 @@
# - define EXECENV_ASFLAGS variable (overridden by cmdline)
# - may override any previously defined variable
#
-# examples for RTE_EXEC_ENV: linuxapp, bsdapp
+# examples for RTE_EXEC_ENV: linux, freebsd
#
ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),y)
EXECENV_CFLAGS = -pthread -fPIC
diff --git a/mk/exec-env/linuxapp b/mk/exec-env/linuxapp
new file mode 120000
index 000000000..ce5e2c77b
--- /dev/null
+++ b/mk/exec-env/linuxapp
@@ -0,0 +1 @@
+linux/
\ No newline at end of file
diff --git a/mk/rte.sdkconfig.mk b/mk/rte.sdkconfig.mk
index fa77331cb..c79bec179 100644
--- a/mk/rte.sdkconfig.mk
+++ b/mk/rte.sdkconfig.mk
@@ -21,9 +21,10 @@ showversionum:
$(RTE_SRCDIR)/lib/librte_eal/common/include/rte_version.h); \
printf '%02d%02d\n' "$$1" "$$2"
-INSTALL_CONFIGS := $(sort $(filter-out %~,\
+INSTALL_CONFIGS := $(sort $(filter-out %app-icc,$(filter-out %app-clang,\
+ $(filter-out %app-gcc,$(filter-out %~,\
$(patsubst $(RTE_SRCDIR)/config/defconfig_%,%,\
- $(wildcard $(RTE_SRCDIR)/config/defconfig_*))))
+ $(wildcard $(RTE_SRCDIR)/config/defconfig_*)))))))
INSTALL_TARGETS := $(addsuffix _install,$(INSTALL_CONFIGS))
.PHONY: showconfigs
@@ -53,9 +54,9 @@ defconfig:
)-$(shell \
uname | awk '{ \
if ($$0 == "Linux") { \
- print "linuxapp"} \
+ print "linux"} \
else { \
- print "bsdapp"} }' \
+ print "freebsd"} }' \
)-$(shell \
${CC} --version | grep -o 'cc\|gcc\|icc\|clang' | awk \
'{ \
diff --git a/mk/rte.sdkinstall.mk b/mk/rte.sdkinstall.mk
index 2d34b4e5a..5c4215cd7 100644
--- a/mk/rte.sdkinstall.mk
+++ b/mk/rte.sdkinstall.mk
@@ -24,6 +24,9 @@ export prefix ?=
kerneldir ?= $(prefix)/kmod
else
ifeq ($(RTE_EXEC_ENV),linuxapp)
+RTE_EXEC_ENV=linux
+endif
+ifeq ($(RTE_EXEC_ENV),linux)
kerneldir ?= /lib/modules/$(shell uname -r)/extra/dpdk
else
kerneldir ?= /boot/modules
diff --git a/mk/rte.sdkroot.mk b/mk/rte.sdkroot.mk
index d91583a63..4043a9d4e 100644
--- a/mk/rte.sdkroot.mk
+++ b/mk/rte.sdkroot.mk
@@ -28,7 +28,7 @@ export BUILDING_RTE_SDK
#
# We can specify the configuration template when doing the "make
-# config". For instance: make config T=x86_64-native-linuxapp-gcc
+# config". For instance: make config T=x86_64-native-linux-gcc
#
RTE_CONFIG_TEMPLATE :=
ifdef T
diff --git a/usertools/dpdk-setup.sh b/usertools/dpdk-setup.sh
index 5eebbce87..d00807420 100755
--- a/usertools/dpdk-setup.sh
+++ b/usertools/dpdk-setup.sh
@@ -479,7 +479,7 @@ step1_func()
#
step2_func()
{
- TITLE="Setup linuxapp environment"
+ TITLE="Setup linux environment"
TEXT[1]="Insert IGB UIO module"
FUNC[1]="load_igb_uio_module"
@@ -514,7 +514,7 @@ step2_func()
#
step3_func()
{
- TITLE="Run test application for linuxapp environment"
+ TITLE="Run test application for linux environment"
TEXT[1]="Run test application (\$RTE_TARGET/app/test)"
FUNC[1]="run_test_app"
--
2.20.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names
2019-03-06 16:22 [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names Bruce Richardson
` (5 preceding siblings ...)
2019-03-06 16:22 ` [dpdk-dev] [PATCH 6/6] build: allow linux and freebsd in build configs Bruce Richardson
@ 2019-03-09 0:57 ` Thomas Monjalon
2019-03-12 22:13 ` Thomas Monjalon
7 siblings, 0 replies; 17+ messages in thread
From: Thomas Monjalon @ 2019-03-09 0:57 UTC (permalink / raw)
To: Bruce Richardson; +Cc: dev
06/03/2019 17:22, Bruce Richardson:
> The terms linuxapp and bsdapp are legacy names in DPDK that are equivalent
> to the more usual names of "linux" and "freebsd". Therefore, we can
> replace the instances of the "app" names with the more usual variants. The
> only issue in maintaining backward compatibility which can be done by
> preserving a) the build config filenames and b) the macros defined for
> the build. In both cases, new configs/macros are added while keeping the
> old for compatiblity.
>
> The first 5 patches are relatively minor, internal changes, or changes for
> the newer meson system. Patch 6 is larger in size as it changes the
> make build system which has far greater use of the names linuxapp and
> bsdapp.
>
> Bruce Richardson (6):
> eal/bsdapp: rename to freebsd
> eal/linuxapp: rename to linux
> build/linux: rename macro from LINUXAPP to LINUX
> build/freebsd: rename macro from BSDPAPP to FREEBSD
> build/meson: change linuxapp to linux in meson cross files
> build: allow linux and freebsd in build configs
I agree on the idea.
If no issue is found, I'll apply it shortly to avoid too many rebase issue.
If someone is against, please shout before Tuesday.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names
2019-03-06 16:22 [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names Bruce Richardson
` (6 preceding siblings ...)
2019-03-09 0:57 ` [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names Thomas Monjalon
@ 2019-03-12 22:13 ` Thomas Monjalon
2019-03-13 13:41 ` Ferruh Yigit
7 siblings, 1 reply; 17+ messages in thread
From: Thomas Monjalon @ 2019-03-12 22:13 UTC (permalink / raw)
To: Bruce Richardson; +Cc: dev
> Bruce Richardson (6):
> eal/bsdapp: rename to freebsd
> eal/linuxapp: rename to linux
> build/linux: rename macro from LINUXAPP to LINUX
> build/freebsd: rename macro from BSDPAPP to FREEBSD
> build/meson: change linuxapp to linux in meson cross files
> build: allow linux and freebsd in build configs
Applied, thanks
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names
2019-03-12 22:13 ` Thomas Monjalon
@ 2019-03-13 13:41 ` Ferruh Yigit
2019-03-13 13:59 ` Thomas Monjalon
0 siblings, 1 reply; 17+ messages in thread
From: Ferruh Yigit @ 2019-03-13 13:41 UTC (permalink / raw)
To: Thomas Monjalon, Bruce Richardson; +Cc: dev
On 3/12/2019 10:13 PM, Thomas Monjalon wrote:
>> Bruce Richardson (6):
>> eal/bsdapp: rename to freebsd
>> eal/linuxapp: rename to linux
>> build/linux: rename macro from LINUXAPP to LINUX
>> build/freebsd: rename macro from BSDPAPP to FREEBSD
>> build/meson: change linuxapp to linux in meson cross files
>> build: allow linux and freebsd in build configs
>
> Applied, thanks
This has potential to break some automation/scripts since changes the names of
the config files:
'make T=x86_64-native-linuxapp-gcc config' becomes
'make T=x86_64-native-linux-gcc config' etc...
I suggest highlighting this change in release notes!
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names
2019-03-13 13:41 ` Ferruh Yigit
@ 2019-03-13 13:59 ` Thomas Monjalon
2019-03-13 14:21 ` Ferruh Yigit
0 siblings, 1 reply; 17+ messages in thread
From: Thomas Monjalon @ 2019-03-13 13:59 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: Bruce Richardson, dev
13/03/2019 14:41, Ferruh Yigit:
> On 3/12/2019 10:13 PM, Thomas Monjalon wrote:
> >> Bruce Richardson (6):
> >> eal/bsdapp: rename to freebsd
> >> eal/linuxapp: rename to linux
> >> build/linux: rename macro from LINUXAPP to LINUX
> >> build/freebsd: rename macro from BSDPAPP to FREEBSD
> >> build/meson: change linuxapp to linux in meson cross files
> >> build: allow linux and freebsd in build configs
> >
> > Applied, thanks
>
> This has potential to break some automation/scripts since changes the names of
> the config files:
> 'make T=x86_64-native-linuxapp-gcc config' becomes
> 'make T=x86_64-native-linux-gcc config' etc...
>
> I suggest highlighting this change in release notes!
No, the old names should still work.
Otherwise, it would be an API breakage, which is very bad!
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names
2019-03-13 13:59 ` Thomas Monjalon
@ 2019-03-13 14:21 ` Ferruh Yigit
2019-03-13 14:43 ` Bruce Richardson
2019-03-13 15:02 ` Bruce Richardson
0 siblings, 2 replies; 17+ messages in thread
From: Ferruh Yigit @ 2019-03-13 14:21 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: Bruce Richardson, dev
On 3/13/2019 1:59 PM, Thomas Monjalon wrote:
> 13/03/2019 14:41, Ferruh Yigit:
>> On 3/12/2019 10:13 PM, Thomas Monjalon wrote:
>>>> Bruce Richardson (6):
>>>> eal/bsdapp: rename to freebsd
>>>> eal/linuxapp: rename to linux
>>>> build/linux: rename macro from LINUXAPP to LINUX
>>>> build/freebsd: rename macro from BSDPAPP to FREEBSD
>>>> build/meson: change linuxapp to linux in meson cross files
>>>> build: allow linux and freebsd in build configs
>>>
>>> Applied, thanks
>>
>> This has potential to break some automation/scripts since changes the names of
>> the config files:
>> 'make T=x86_64-native-linuxapp-gcc config' becomes
>> 'make T=x86_64-native-linux-gcc config' etc...
>>
>> I suggest highlighting this change in release notes!
>
> No, the old names should still work.
> Otherwise, it would be an API breakage, which is very bad!
>
Ah, right config is working, how I hit this is:
$ make T=x86_64-native-linuxapp-gcc cscope
Invalid config: x86_64-native-linuxapp-gcc
'cscope' (and friends) also should be covered ...
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names
2019-03-13 14:21 ` Ferruh Yigit
@ 2019-03-13 14:43 ` Bruce Richardson
2019-03-13 15:14 ` Ferruh Yigit
2019-03-13 15:02 ` Bruce Richardson
1 sibling, 1 reply; 17+ messages in thread
From: Bruce Richardson @ 2019-03-13 14:43 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: Thomas Monjalon, dev
On Wed, Mar 13, 2019 at 02:21:31PM +0000, Ferruh Yigit wrote:
> On 3/13/2019 1:59 PM, Thomas Monjalon wrote:
> > 13/03/2019 14:41, Ferruh Yigit:
> >> On 3/12/2019 10:13 PM, Thomas Monjalon wrote:
> >>>> Bruce Richardson (6):
> >>>> eal/bsdapp: rename to freebsd
> >>>> eal/linuxapp: rename to linux
> >>>> build/linux: rename macro from LINUXAPP to LINUX
> >>>> build/freebsd: rename macro from BSDPAPP to FREEBSD
> >>>> build/meson: change linuxapp to linux in meson cross files
> >>>> build: allow linux and freebsd in build configs
> >>>
> >>> Applied, thanks
> >>
> >> This has potential to break some automation/scripts since changes the names of
> >> the config files:
> >> 'make T=x86_64-native-linuxapp-gcc config' becomes
> >> 'make T=x86_64-native-linux-gcc config' etc...
> >>
> >> I suggest highlighting this change in release notes!
> >
> > No, the old names should still work.
> > Otherwise, it would be an API breakage, which is very bad!
> >
>
> Ah, right config is working, how I hit this is:
>
> $ make T=x86_64-native-linuxapp-gcc cscope
> Invalid config: x86_64-native-linuxapp-gcc
>
> 'cscope' (and friends) also should be covered ...
Strange, because the new configs are just symlinks to the old. I'll need to
investigate how cscope and friends use the config.
/Bruce
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names
2019-03-13 14:21 ` Ferruh Yigit
2019-03-13 14:43 ` Bruce Richardson
@ 2019-03-13 15:02 ` Bruce Richardson
2019-03-13 15:11 ` Bruce Richardson
1 sibling, 1 reply; 17+ messages in thread
From: Bruce Richardson @ 2019-03-13 15:02 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: Thomas Monjalon, dev
On Wed, Mar 13, 2019 at 02:21:31PM +0000, Ferruh Yigit wrote:
> On 3/13/2019 1:59 PM, Thomas Monjalon wrote:
> > 13/03/2019 14:41, Ferruh Yigit:
> >> On 3/12/2019 10:13 PM, Thomas Monjalon wrote:
> >>>> Bruce Richardson (6):
> >>>> eal/bsdapp: rename to freebsd
> >>>> eal/linuxapp: rename to linux
> >>>> build/linux: rename macro from LINUXAPP to LINUX
> >>>> build/freebsd: rename macro from BSDPAPP to FREEBSD
> >>>> build/meson: change linuxapp to linux in meson cross files
> >>>> build: allow linux and freebsd in build configs
> >>>
> >>> Applied, thanks
> >>
> >> This has potential to break some automation/scripts since changes the names of
> >> the config files:
> >> 'make T=x86_64-native-linuxapp-gcc config' becomes
> >> 'make T=x86_64-native-linux-gcc config' etc...
> >>
> >> I suggest highlighting this change in release notes!
> >
> > No, the old names should still work.
> > Otherwise, it would be an API breakage, which is very bad!
> >
>
> Ah, right config is working, how I hit this is:
>
> $ make T=x86_64-native-linuxapp-gcc cscope
> Invalid config: x86_64-native-linuxapp-gcc
>
> 'cscope' (and friends) also should be covered ...
Ok, the root cause of this is that even though the build-tags function does
not use the config, it checks if the config parameter passed in is a valid
one by running "make showconfig". This I changed to filter out the old
configs so they are not advertised any more - though they still work -
which causes build-tags to assume that the config is invalid.
I therefore suggest we fix this by changing the check for a valid config to
check if there is a defconfig_ file with the same name rather than asking
showconfig.
/Bruce
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names
2019-03-13 15:02 ` Bruce Richardson
@ 2019-03-13 15:11 ` Bruce Richardson
0 siblings, 0 replies; 17+ messages in thread
From: Bruce Richardson @ 2019-03-13 15:11 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: Thomas Monjalon, dev
On Wed, Mar 13, 2019 at 03:02:57PM +0000, Bruce Richardson wrote:
> On Wed, Mar 13, 2019 at 02:21:31PM +0000, Ferruh Yigit wrote:
> > On 3/13/2019 1:59 PM, Thomas Monjalon wrote:
> > > 13/03/2019 14:41, Ferruh Yigit:
> > >> On 3/12/2019 10:13 PM, Thomas Monjalon wrote:
> > >>>> Bruce Richardson (6):
> > >>>> eal/bsdapp: rename to freebsd
> > >>>> eal/linuxapp: rename to linux
> > >>>> build/linux: rename macro from LINUXAPP to LINUX
> > >>>> build/freebsd: rename macro from BSDPAPP to FREEBSD
> > >>>> build/meson: change linuxapp to linux in meson cross files
> > >>>> build: allow linux and freebsd in build configs
> > >>>
> > >>> Applied, thanks
> > >>
> > >> This has potential to break some automation/scripts since changes the names of
> > >> the config files:
> > >> 'make T=x86_64-native-linuxapp-gcc config' becomes
> > >> 'make T=x86_64-native-linux-gcc config' etc...
> > >>
> > >> I suggest highlighting this change in release notes!
> > >
> > > No, the old names should still work.
> > > Otherwise, it would be an API breakage, which is very bad!
> > >
> >
> > Ah, right config is working, how I hit this is:
> >
> > $ make T=x86_64-native-linuxapp-gcc cscope
> > Invalid config: x86_64-native-linuxapp-gcc
> >
> > 'cscope' (and friends) also should be covered ...
>
> Ok, the root cause of this is that even though the build-tags function does
> not use the config, it checks if the config parameter passed in is a valid
> one by running "make showconfig". This I changed to filter out the old
> configs so they are not advertised any more - though they still work -
> which causes build-tags to assume that the config is invalid.
>
> I therefore suggest we fix this by changing the check for a valid config to
> check if there is a defconfig_ file with the same name rather than asking
> showconfig.
>
http://patches.dpdk.org/patch/51155/
Please review.
Thanks,
/Bruce
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names
2019-03-13 14:43 ` Bruce Richardson
@ 2019-03-13 15:14 ` Ferruh Yigit
2019-03-13 15:20 ` Bruce Richardson
0 siblings, 1 reply; 17+ messages in thread
From: Ferruh Yigit @ 2019-03-13 15:14 UTC (permalink / raw)
To: Bruce Richardson; +Cc: Thomas Monjalon, dev
On 3/13/2019 2:43 PM, Bruce Richardson wrote:
> On Wed, Mar 13, 2019 at 02:21:31PM +0000, Ferruh Yigit wrote:
>> On 3/13/2019 1:59 PM, Thomas Monjalon wrote:
>>> 13/03/2019 14:41, Ferruh Yigit:
>>>> On 3/12/2019 10:13 PM, Thomas Monjalon wrote:
>>>>>> Bruce Richardson (6):
>>>>>> eal/bsdapp: rename to freebsd
>>>>>> eal/linuxapp: rename to linux
>>>>>> build/linux: rename macro from LINUXAPP to LINUX
>>>>>> build/freebsd: rename macro from BSDPAPP to FREEBSD
>>>>>> build/meson: change linuxapp to linux in meson cross files
>>>>>> build: allow linux and freebsd in build configs
>>>>>
>>>>> Applied, thanks
>>>>
>>>> This has potential to break some automation/scripts since changes the names of
>>>> the config files:
>>>> 'make T=x86_64-native-linuxapp-gcc config' becomes
>>>> 'make T=x86_64-native-linux-gcc config' etc...
>>>>
>>>> I suggest highlighting this change in release notes!
>>>
>>> No, the old names should still work.
>>> Otherwise, it would be an API breakage, which is very bad!
>>>
>>
>> Ah, right config is working, how I hit this is:
>>
>> $ make T=x86_64-native-linuxapp-gcc cscope
>> Invalid config: x86_64-native-linuxapp-gcc
>>
>> 'cscope' (and friends) also should be covered ...
>
> Strange, because the new configs are just symlinks to the old. I'll need to
> investigate how cscope and friends use the config.
Are we allowed to use symlinks J Will they play nice on windows?
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names
2019-03-13 15:14 ` Ferruh Yigit
@ 2019-03-13 15:20 ` Bruce Richardson
0 siblings, 0 replies; 17+ messages in thread
From: Bruce Richardson @ 2019-03-13 15:20 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: Thomas Monjalon, dev
On Wed, Mar 13, 2019 at 03:14:27PM +0000, Ferruh Yigit wrote:
> On 3/13/2019 2:43 PM, Bruce Richardson wrote:
> > On Wed, Mar 13, 2019 at 02:21:31PM +0000, Ferruh Yigit wrote:
> >> On 3/13/2019 1:59 PM, Thomas Monjalon wrote:
> >>> 13/03/2019 14:41, Ferruh Yigit:
> >>>> On 3/12/2019 10:13 PM, Thomas Monjalon wrote:
> >>>>>> Bruce Richardson (6):
> >>>>>> eal/bsdapp: rename to freebsd
> >>>>>> eal/linuxapp: rename to linux
> >>>>>> build/linux: rename macro from LINUXAPP to LINUX
> >>>>>> build/freebsd: rename macro from BSDPAPP to FREEBSD
> >>>>>> build/meson: change linuxapp to linux in meson cross files
> >>>>>> build: allow linux and freebsd in build configs
> >>>>>
> >>>>> Applied, thanks
> >>>>
> >>>> This has potential to break some automation/scripts since changes the names of
> >>>> the config files:
> >>>> 'make T=x86_64-native-linuxapp-gcc config' becomes
> >>>> 'make T=x86_64-native-linux-gcc config' etc...
> >>>>
> >>>> I suggest highlighting this change in release notes!
> >>>
> >>> No, the old names should still work.
> >>> Otherwise, it would be an API breakage, which is very bad!
> >>>
> >>
> >> Ah, right config is working, how I hit this is:
> >>
> >> $ make T=x86_64-native-linuxapp-gcc cscope
> >> Invalid config: x86_64-native-linuxapp-gcc
> >>
> >> 'cscope' (and friends) also should be covered ...
> >
> > Strange, because the new configs are just symlinks to the old. I'll need to
> > investigate how cscope and friends use the config.
>
> Are we allowed to use symlinks J Will they play nice on windows?
They'll work well enough. Plus it's only for the old build system, so will
go away in the future.
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2019-03-13 15:20 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-06 16:22 [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 1/6] eal/bsdapp: rename to freebsd Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 2/6] eal/linuxapp: rename to linux Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 3/6] build/linux: rename macro from LINUXAPP to LINUX Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 4/6] build/freebsd: rename macro from BSDPAPP to FREEBSD Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 5/6] build/meson: change linuxapp to linux in meson cross files Bruce Richardson
2019-03-06 16:22 ` [dpdk-dev] [PATCH 6/6] build: allow linux and freebsd in build configs Bruce Richardson
2019-03-09 0:57 ` [dpdk-dev] [RFC PATCH 0/6] change legacy linuxapp/bsdapp names Thomas Monjalon
2019-03-12 22:13 ` Thomas Monjalon
2019-03-13 13:41 ` Ferruh Yigit
2019-03-13 13:59 ` Thomas Monjalon
2019-03-13 14:21 ` Ferruh Yigit
2019-03-13 14:43 ` Bruce Richardson
2019-03-13 15:14 ` Ferruh Yigit
2019-03-13 15:20 ` Bruce Richardson
2019-03-13 15:02 ` Bruce Richardson
2019-03-13 15:11 ` Bruce Richardson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).