DPDK patches and discussions
 help / color / mirror / Atom feed
From: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
To: dev@dpdk.org
Cc: Adrien Mazarguil <adrien.mazarguil@6wind.com>,
	Yongseok Koh <yskoh@mellanox.com>,
	shahafs@mellanox.com, stable@dpdk.org
Subject: [dpdk-dev] [PATCH v2 3/3] net/mlx5: fix link status to use wait to complete
Date: Mon, 12 Mar 2018 14:43:19 +0100	[thread overview]
Message-ID: <afba5a9e6bb1b2368c9f6eb88f794977afa84c4f.1520862100.git.nelio.laranjeiro@6wind.com> (raw)
In-Reply-To: <cover.1520862100.git.nelio.laranjeiro@6wind.com>
In-Reply-To: <cover.1520862100.git.nelio.laranjeiro@6wind.com>

Wait to complete is present to let the application get a correct status
when it requires it, it should not be ignored.

Fixes: e313ef4c2fe8 ("net/mlx5: fix link state on device start")
Fixes: cb8faed7dde8 ("mlx5: support link status update")
Cc: shahafs@mellanox.com
Cc: adrien.mazarguil@6wind.com
Cc: stable@dpdk.org

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
---
 drivers/net/mlx5/mlx5.h        |   1 -
 drivers/net/mlx5/mlx5_defs.h   |   4 +-
 drivers/net/mlx5/mlx5_ethdev.c | 147 ++++++++++++++++-------------------------
 3 files changed, 58 insertions(+), 94 deletions(-)

diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 86310404a..faacfd9d6 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -124,7 +124,6 @@ struct priv {
 	/* Device properties. */
 	uint16_t mtu; /* Configured MTU. */
 	uint8_t port; /* Physical port number. */
-	unsigned int pending_alarm:1; /* An alarm is pending. */
 	unsigned int isolated:1; /* Whether isolated mode is enabled. */
 	/* RX/TX queues. */
 	unsigned int rxqs_n; /* RX queues array size. */
diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h
index c3334ca30..6401588ee 100644
--- a/drivers/net/mlx5/mlx5_defs.h
+++ b/drivers/net/mlx5/mlx5_defs.h
@@ -82,8 +82,8 @@
 /* Supported RSS */
 #define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP))
 
-/* Maximum number of attempts to query link status before giving up. */
-#define MLX5_MAX_LINK_QUERY_ATTEMPTS 5
+/* Timeout in seconds to get a valid link status. */
+#define MLX5_LINK_STATUS_TIMEOUT 10
 
 /* Reserved address space for UAR mapping. */
 #define MLX5_UAR_SIZE (1ULL << 32)
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index 10ba27c79..f219f2ccd 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -24,6 +24,7 @@
 #include <fcntl.h>
 #include <stdalign.h>
 #include <sys/un.h>
+#include <time.h>
 
 #include <rte_atomic.h>
 #include <rte_ethdev_driver.h>
@@ -31,7 +32,6 @@
 #include <rte_mbuf.h>
 #include <rte_common.h>
 #include <rte_interrupts.h>
-#include <rte_alarm.h>
 #include <rte_malloc.h>
 
 #include "mlx5.h"
@@ -473,12 +473,15 @@ mlx5_dev_supported_ptypes_get(struct rte_eth_dev *dev)
  *
  * @param dev
  *   Pointer to Ethernet device structure.
+ * @param[out] link
+ *   Storage for current link status.
  *
  * @return
  *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
 static int
-mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev)
+mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev,
+			       struct rte_eth_link *link)
 {
 	struct priv *priv = dev->data->dev_private;
 	struct ethtool_cmd edata = {
@@ -528,14 +531,13 @@ mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev)
 				ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
 	dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
 			ETH_LINK_SPEED_FIXED);
-	if (memcmp(&dev_link, &dev->data->dev_link, sizeof(dev_link))) {
-		/* Link status changed. */
-		dev->data->dev_link = dev_link;
-		return 0;
+	if ((dev_link.link_speed && !dev_link.link_status) ||
+	    (!dev_link.link_speed && dev_link.link_status)) {
+		rte_errno = EAGAIN;
+		return -rte_errno;
 	}
-	/* Link status is still the same. */
-	rte_errno = EAGAIN;
-	return -rte_errno;
+	*link = dev_link;
+	return 0;
 }
 
 /**
@@ -543,12 +545,16 @@ mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev)
  *
  * @param dev
  *   Pointer to Ethernet device structure.
+ * @param[out] link
+ *   Storage for current link status.
  *
  * @return
  *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
 static int
-mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev)
+mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev,
+			     struct rte_eth_link *link)
+
 {
 	struct priv *priv = dev->data->dev_private;
 	struct ethtool_link_settings gcmd = { .cmd = ETHTOOL_GLINKSETTINGS };
@@ -634,14 +640,13 @@ mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev)
 				ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
 	dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
 				  ETH_LINK_SPEED_FIXED);
-	if (memcmp(&dev_link, &dev->data->dev_link, sizeof(dev_link))) {
-		/* Link status changed. */
-		dev->data->dev_link = dev_link;
-		return 0;
+	if ((dev_link.link_speed && !dev_link.link_status) ||
+	    (!dev_link.link_speed && dev_link.link_status)) {
+		rte_errno = EAGAIN;
+		return -rte_errno;
 	}
-	/* Link status is still the same. */
-	rte_errno = EAGAIN;
-	return -rte_errno;
+	*link = dev_link;
+	return 0;
 }
 
 /**
@@ -650,20 +655,43 @@ mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev)
  * @param dev
  *   Pointer to Ethernet device structure.
  * @param wait_to_complete
- *   Wait for request completion (ignored).
+ *   Wait for request completion.
  *
  * @return
- *   0 on success, a negative errno value otherwise and rte_errno is set.
+ *   0 if link status was not updated, positive if it was, a negative errno
+ *   value otherwise and rte_errno is set.*
  */
 int
-mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete __rte_unused)
+mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
 {
 	int ret;
+	struct rte_eth_link dev_link;
+	time_t start_time = time(NULL);
 
-	ret = mlx5_link_update_unlocked_gset(dev);
-	if (ret)
-		ret = mlx5_link_update_unlocked_gs(dev);
-	return 0;
+	do {
+		ret = mlx5_link_update_unlocked_gset(dev, &dev_link);
+		if (ret)
+			ret = mlx5_link_update_unlocked_gs(dev, &dev_link);
+		if (ret == 0)
+			break;
+		/* Handle wait to complete situation. */
+		if (wait_to_complete && ret == -EAGAIN) {
+			if (abs((int)difftime(time(NULL), start_time)) <
+			    MLX5_LINK_STATUS_TIMEOUT) {
+				usleep(0);
+				continue;
+			} else {
+				rte_errno = EBUSY;
+				return -rte_errno;
+			}
+		} else if (ret < 0) {
+			return ret;
+		}
+	} while (wait_to_complete);
+	ret = !!memcmp(&dev->data->dev_link, &dev_link,
+		       sizeof(struct rte_eth_link));
+	dev->data->dev_link = dev_link;
+	return ret;
 }
 
 /**
@@ -842,47 +870,6 @@ mlx5_ibv_device_to_pci_addr(const struct ibv_device *device,
 }
 
 /**
- * Update the link status.
- *
- * @param dev
- *   Pointer to Ethernet device.
- *
- * @return
- *   Zero if the callback process can be called immediately, negative errno
- *   value otherwise and rte_errno is set.
- */
-static int
-mlx5_link_status_update(struct rte_eth_dev *dev)
-{
-	struct priv *priv = dev->data->dev_private;
-	struct rte_eth_link *link = &dev->data->dev_link;
-	int ret;
-
-	ret = mlx5_link_update(dev, 0);
-	if (ret)
-		return ret;
-	if (((link->link_speed == 0) && link->link_status) ||
-		((link->link_speed != 0) && !link->link_status)) {
-		/*
-		 * Inconsistent status. Event likely occurred before the
-		 * kernel netdevice exposes the new status.
-		 */
-		if (!priv->pending_alarm) {
-			priv->pending_alarm = 1;
-			rte_eal_alarm_set(MLX5_ALARM_TIMEOUT_US,
-					  mlx5_dev_link_status_handler,
-					  priv->dev);
-		}
-		return 1;
-	} else if (unlikely(priv->pending_alarm)) {
-		/* Link interrupt occurred while alarm is already scheduled. */
-		priv->pending_alarm = 0;
-		rte_eal_alarm_cancel(mlx5_dev_link_status_handler, priv->dev);
-	}
-	return 0;
-}
-
-/**
  * Device status handler.
  *
  * @param dev
@@ -900,6 +887,10 @@ mlx5_dev_status_handler(struct rte_eth_dev *dev)
 	struct ibv_async_event event;
 	uint32_t ret = 0;
 
+	if (mlx5_link_update(dev, 0) == -EAGAIN) {
+		usleep(0);
+		return 0;
+	}
 	/* Read all message and acknowledge them. */
 	for (;;) {
 		if (mlx5_glue->get_async_event(priv->ctx, &event))
@@ -917,32 +908,10 @@ mlx5_dev_status_handler(struct rte_eth_dev *dev)
 				dev->data->port_id, event.event_type);
 		mlx5_glue->ack_async_event(&event);
 	}
-	if (ret & (1 << RTE_ETH_EVENT_INTR_LSC))
-		if (mlx5_link_status_update(dev))
-			ret &= ~(1 << RTE_ETH_EVENT_INTR_LSC);
 	return ret;
 }
 
 /**
- * Handle delayed link status event.
- *
- * @param arg
- *   Registered argument.
- */
-void
-mlx5_dev_link_status_handler(void *arg)
-{
-	struct rte_eth_dev *dev = arg;
-	struct priv *priv = dev->data->dev_private;
-	int ret;
-
-	priv->pending_alarm = 0;
-	ret = mlx5_link_status_update(dev);
-	if (!ret)
-		_rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
-}
-
-/**
  * Handle interrupts from the NIC.
  *
  * @param[in] intr_handle
@@ -995,10 +964,6 @@ mlx5_dev_interrupt_handler_uninstall(struct rte_eth_dev *dev)
 	if (priv->primary_socket)
 		rte_intr_callback_unregister(&priv->intr_handle_socket,
 					     mlx5_dev_handler_socket, dev);
-	if (priv->pending_alarm) {
-		priv->pending_alarm = 0;
-		rte_eal_alarm_cancel(mlx5_dev_link_status_handler, dev);
-	}
 	priv->intr_handle.fd = 0;
 	priv->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
 	priv->intr_handle_socket.fd = 0;
-- 
2.11.0

      parent reply	other threads:[~2018-03-12 13:44 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-15  8:47 [dpdk-dev] [PATCH 1/2] net/mlx5: add kernel version function Nelio Laranjeiro
2018-02-15  8:47 ` [dpdk-dev] [PATCH 2/2] net/mlx5: fix link status to use wait to complete Nelio Laranjeiro
2018-02-16 10:49   ` Adrien Mazarguil
2018-02-16 12:08     ` Nélio Laranjeiro
2018-02-16 10:48 ` [dpdk-dev] [PATCH 1/2] net/mlx5: add kernel version function Adrien Mazarguil
2018-02-16 18:03 ` Stephen Hemminger
2018-02-19  7:42   ` Nélio Laranjeiro
2018-03-12 13:43 ` [dpdk-dev] [PATCH v2 0/3] net/mlx5: cleanup link status Nelio Laranjeiro
2018-03-19 19:15   ` Shahaf Shuler
2018-03-12 13:43 ` [dpdk-dev] [PATCH v2 1/3] net/mlx5: remove kernel version check Nelio Laranjeiro
2018-03-12 13:43 ` [dpdk-dev] [PATCH v2 2/3] net/mlx5: fix link status behavior Nelio Laranjeiro
2018-03-13 21:54   ` Yongseok Koh
2018-03-14 12:18     ` Adrien Mazarguil
2018-03-14 17:40       ` Yongseok Koh
2018-03-14 19:00         ` Adrien Mazarguil
2018-03-14 12:22     ` Nélio Laranjeiro
2018-03-15 18:08   ` Yongseok Koh
2018-03-12 13:43 ` Nelio Laranjeiro [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=afba5a9e6bb1b2368c9f6eb88f794977afa84c4f.1520862100.git.nelio.laranjeiro@6wind.com \
    --to=nelio.laranjeiro@6wind.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=shahafs@mellanox.com \
    --cc=stable@dpdk.org \
    --cc=yskoh@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).