[dpdk-dev] [PATCH] bonding: fix lacp negotiation failed

[dpdk-dev] [PATCH] bonding: fix lacp negotiation failed

[Liang Zhang]

When monitor(port-mirroring) traffic from other lacp port-channel,
rx_machine_update may recieving other lacp negotiation packets.
Thus bond mode 4 will negotiation failed.

Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
---
 drivers/net/bonding/rte_eth_bond_8023ad.c         | 9 +++++++--
 drivers/net/bonding/rte_eth_bond_8023ad_private.h | 1 +
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index dd847c6..e518956 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -784,13 +784,17 @@ static void
 rx_machine_update(struct bond_dev_private *internals, uint8_t slave_id,
 		struct rte_mbuf *lacp_pkt) {
 	struct lacpdu_header *lacp;
+	struct lacpdu_actor_partner_params *partner;
 
 	if (lacp_pkt != NULL) {
 		lacp = rte_pktmbuf_mtod(lacp_pkt, struct lacpdu_header *);
 		RTE_ASSERT(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
 
-		/* This is LACP frame so pass it to rx_machine */
-		rx_machine(internals, slave_id, &lacp->lacpdu);
+		partner = &lacp->lacpdu.partner;
+		if (is_same_ether_addr(&partner->port_params.system, &internals->mode4.mac_addr)) {
+			/* This is LACP frame to the bonding port so pass it to rx_machine */
+			rx_machine(internals, slave_id, &lacp->lacpdu);
+		}
 		rte_pktmbuf_free(lacp_pkt);
 	} else
 		rx_machine(internals, slave_id, NULL);
@@ -1140,6 +1144,7 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
 	bond_mode_8023ad_conf_assign(mode4, conf);
 	mode4->slowrx_cb = conf->slowrx_cb;
 	mode4->agg_selection = AGG_STABLE;
+	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 
 	if (dev->data->dev_started)
 		bond_mode_8023ad_start(dev);
diff --git a/drivers/net/bonding/rte_eth_bond_8023ad_private.h b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
index c51426b..f91902e 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad_private.h
+++ b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
@@ -150,6 +150,7 @@ struct mode8023ad_private {
 	uint64_t update_timeout_us;
 	rte_eth_bond_8023ad_ext_slowrx_fn slowrx_cb;
 	uint8_t external_sm;
+	struct ether_addr mac_addr;
 
 	struct rte_eth_link slave_link;
 	/***< slave link properties */
-- 
2.7.4

Re: [dpdk-dev] [PATCH] bonding: fix lacp negotiation failed

[Chas Williams]

At a minimum you need to address the long lines in your patch. See

http://mails.dpdk.org/archives/test-report/2019-March/076663.html

otherwise this looks fine to me.

On 3/13/19 9:23 AM, Liang Zhang wrote:
> When monitor(port-mirroring) traffic from other lacp port-channel,
> rx_machine_update may recieving other lacp negotiation packets.
> Thus bond mode 4 will negotiation failed.
> 
> Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
> ---
>   drivers/net/bonding/rte_eth_bond_8023ad.c         | 9 +++++++--
>   drivers/net/bonding/rte_eth_bond_8023ad_private.h | 1 +
>   2 files changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
> index dd847c6..e518956 100644
> --- a/drivers/net/bonding/rte_eth_bond_8023ad.c
> +++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
> @@ -784,13 +784,17 @@ static void
>   rx_machine_update(struct bond_dev_private *internals, uint8_t slave_id,
>   		struct rte_mbuf *lacp_pkt) {
>   	struct lacpdu_header *lacp;
> +	struct lacpdu_actor_partner_params *partner;
>   
>   	if (lacp_pkt != NULL) {
>   		lacp = rte_pktmbuf_mtod(lacp_pkt, struct lacpdu_header *);
>   		RTE_ASSERT(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
>   
> -		/* This is LACP frame so pass it to rx_machine */
> -		rx_machine(internals, slave_id, &lacp->lacpdu);
> +		partner = &lacp->lacpdu.partner;
> +		if (is_same_ether_addr(&partner->port_params.system, &internals->mode4.mac_addr)) {
> +			/* This is LACP frame to the bonding port so pass it to rx_machine */
> +			rx_machine(internals, slave_id, &lacp->lacpdu);
> +		}
>   		rte_pktmbuf_free(lacp_pkt);
>   	} else
>   		rx_machine(internals, slave_id, NULL);
> @@ -1140,6 +1144,7 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
>   	bond_mode_8023ad_conf_assign(mode4, conf);
>   	mode4->slowrx_cb = conf->slowrx_cb;
>   	mode4->agg_selection = AGG_STABLE;
> +	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
>   
>   	if (dev->data->dev_started)
>   		bond_mode_8023ad_start(dev);
> diff --git a/drivers/net/bonding/rte_eth_bond_8023ad_private.h b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
> index c51426b..f91902e 100644
> --- a/drivers/net/bonding/rte_eth_bond_8023ad_private.h
> +++ b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
> @@ -150,6 +150,7 @@ struct mode8023ad_private {
>   	uint64_t update_timeout_us;
>   	rte_eth_bond_8023ad_ext_slowrx_fn slowrx_cb;
>   	uint8_t external_sm;
> +	struct ether_addr mac_addr;
>   
>   	struct rte_eth_link slave_link;
>   	/***< slave link properties */
> 

[dpdk-dev] [PATCH v2] bonding: change mac_addr filled position

[Liang Zhang]

When mac_address update in bond_mode_8023ad_mac_address_update,
bonding port's mac_addr should update also.

Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
---
 drivers/net/bonding/rte_eth_bond_8023ad.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index e518956..dac23ac 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -791,8 +791,11 @@ rx_machine_update(struct bond_dev_private *internals, uint8_t slave_id,
 		RTE_ASSERT(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
 
 		partner = &lacp->lacpdu.partner;
-		if (is_same_ether_addr(&partner->port_params.system, &internals->mode4.mac_addr)) {
-			/* This is LACP frame to the bonding port so pass it to rx_machine */
+		if (is_same_ether_addr(&partner->port_params.system,
+			&internals->mode4.mac_addr)) {
+			/* This LACP frame is sending to the bonding port
+			 * so pass it to rx_machine.
+			 */
 			rx_machine(internals, slave_id, &lacp->lacpdu);
 		}
 		rte_pktmbuf_free(lacp_pkt);
@@ -1144,7 +1147,6 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
 	bond_mode_8023ad_conf_assign(mode4, conf);
 	mode4->slowrx_cb = conf->slowrx_cb;
 	mode4->agg_selection = AGG_STABLE;
-	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 
 	if (dev->data->dev_started)
 		bond_mode_8023ad_start(dev);
@@ -1170,6 +1172,7 @@ bond_mode_8023ad_start(struct rte_eth_dev *bond_dev)
 	struct mode8023ad_private *mode4 = &internals->mode4;
 	static const uint64_t us = BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000;
 
+	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 	if (mode4->slowrx_cb)
 		return rte_eal_alarm_set(us, &bond_mode_8023ad_ext_periodic_cb,
 					 bond_dev);
-- 
2.7.4

[dpdk-dev] [PATCH v2] bonding: change mac_addr filled position

[Liang Zhang]

When mac_address update in bond_mode_8023ad_mac_address_update,
bonding port's mac_addr should update also.

Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
---
 drivers/net/bonding/rte_eth_bond_8023ad.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index e518956..dac23ac 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -791,8 +791,11 @@ rx_machine_update(struct bond_dev_private *internals, uint8_t slave_id,
 		RTE_ASSERT(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
 
 		partner = &lacp->lacpdu.partner;
-		if (is_same_ether_addr(&partner->port_params.system, &internals->mode4.mac_addr)) {
-			/* This is LACP frame to the bonding port so pass it to rx_machine */
+		if (is_same_ether_addr(&partner->port_params.system,
+			&internals->mode4.mac_addr)) {
+			/* This LACP frame is sending to the bonding port
+			 * so pass it to rx_machine.
+			 */
 			rx_machine(internals, slave_id, &lacp->lacpdu);
 		}
 		rte_pktmbuf_free(lacp_pkt);
@@ -1144,7 +1147,6 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
 	bond_mode_8023ad_conf_assign(mode4, conf);
 	mode4->slowrx_cb = conf->slowrx_cb;
 	mode4->agg_selection = AGG_STABLE;
-	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 
 	if (dev->data->dev_started)
 		bond_mode_8023ad_start(dev);
@@ -1170,6 +1172,7 @@ bond_mode_8023ad_start(struct rte_eth_dev *bond_dev)
 	struct mode8023ad_private *mode4 = &internals->mode4;
 	static const uint64_t us = BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000;
 
+	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 	if (mode4->slowrx_cb)
 		return rte_eal_alarm_set(us, &bond_mode_8023ad_ext_periodic_cb,
 					 bond_dev);
-- 
2.7.4

[dpdk-dev] [PATCH v3 1/2] bonding: fix lacp negotiation failed

[Liang Zhang]

When monitor(port-mirroring) traffic from other lacp port-channel,
rx_machine_update may recieving other lacp negotiation packets.
Thus bond mode 4 will negotiation failed.

Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
---
 drivers/net/bonding/rte_eth_bond_8023ad.c         | 9 +++++++--
 drivers/net/bonding/rte_eth_bond_8023ad_private.h | 1 +
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index dd847c6..e518956 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -784,13 +784,17 @@ static void
 rx_machine_update(struct bond_dev_private *internals, uint8_t slave_id,
 		struct rte_mbuf *lacp_pkt) {
 	struct lacpdu_header *lacp;
+	struct lacpdu_actor_partner_params *partner;
 
 	if (lacp_pkt != NULL) {
 		lacp = rte_pktmbuf_mtod(lacp_pkt, struct lacpdu_header *);
 		RTE_ASSERT(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
 
-		/* This is LACP frame so pass it to rx_machine */
-		rx_machine(internals, slave_id, &lacp->lacpdu);
+		partner = &lacp->lacpdu.partner;
+		if (is_same_ether_addr(&partner->port_params.system, &internals->mode4.mac_addr)) {
+			/* This is LACP frame to the bonding port so pass it to rx_machine */
+			rx_machine(internals, slave_id, &lacp->lacpdu);
+		}
 		rte_pktmbuf_free(lacp_pkt);
 	} else
 		rx_machine(internals, slave_id, NULL);
@@ -1140,6 +1144,7 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
 	bond_mode_8023ad_conf_assign(mode4, conf);
 	mode4->slowrx_cb = conf->slowrx_cb;
 	mode4->agg_selection = AGG_STABLE;
+	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 
 	if (dev->data->dev_started)
 		bond_mode_8023ad_start(dev);
diff --git a/drivers/net/bonding/rte_eth_bond_8023ad_private.h b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
index c51426b..f91902e 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad_private.h
+++ b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
@@ -150,6 +150,7 @@ struct mode8023ad_private {
 	uint64_t update_timeout_us;
 	rte_eth_bond_8023ad_ext_slowrx_fn slowrx_cb;
 	uint8_t external_sm;
+	struct ether_addr mac_addr;
 
 	struct rte_eth_link slave_link;
 	/***< slave link properties */
-- 
2.7.4

[dpdk-dev] [PATCH v3 1/2] bonding: fix lacp negotiation failed

[Liang Zhang]

When monitor(port-mirroring) traffic from other lacp port-channel,
rx_machine_update may recieving other lacp negotiation packets.
Thus bond mode 4 will negotiation failed.

Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
---
 drivers/net/bonding/rte_eth_bond_8023ad.c         | 9 +++++++--
 drivers/net/bonding/rte_eth_bond_8023ad_private.h | 1 +
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index dd847c6..e518956 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -784,13 +784,17 @@ static void
 rx_machine_update(struct bond_dev_private *internals, uint8_t slave_id,
 		struct rte_mbuf *lacp_pkt) {
 	struct lacpdu_header *lacp;
+	struct lacpdu_actor_partner_params *partner;
 
 	if (lacp_pkt != NULL) {
 		lacp = rte_pktmbuf_mtod(lacp_pkt, struct lacpdu_header *);
 		RTE_ASSERT(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
 
-		/* This is LACP frame so pass it to rx_machine */
-		rx_machine(internals, slave_id, &lacp->lacpdu);
+		partner = &lacp->lacpdu.partner;
+		if (is_same_ether_addr(&partner->port_params.system, &internals->mode4.mac_addr)) {
+			/* This is LACP frame to the bonding port so pass it to rx_machine */
+			rx_machine(internals, slave_id, &lacp->lacpdu);
+		}
 		rte_pktmbuf_free(lacp_pkt);
 	} else
 		rx_machine(internals, slave_id, NULL);
@@ -1140,6 +1144,7 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
 	bond_mode_8023ad_conf_assign(mode4, conf);
 	mode4->slowrx_cb = conf->slowrx_cb;
 	mode4->agg_selection = AGG_STABLE;
+	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 
 	if (dev->data->dev_started)
 		bond_mode_8023ad_start(dev);
diff --git a/drivers/net/bonding/rte_eth_bond_8023ad_private.h b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
index c51426b..f91902e 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad_private.h
+++ b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
@@ -150,6 +150,7 @@ struct mode8023ad_private {
 	uint64_t update_timeout_us;
 	rte_eth_bond_8023ad_ext_slowrx_fn slowrx_cb;
 	uint8_t external_sm;
+	struct ether_addr mac_addr;
 
 	struct rte_eth_link slave_link;
 	/***< slave link properties */
-- 
2.7.4

[dpdk-dev] [PATCH v3 2/2] bonding: change mac_addr filled position

[Liang Zhang]

When mac_address update in bond_mode_8023ad_mac_address_update,
bonding port's mac_addr should update also.

Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
---
 drivers/net/bonding/rte_eth_bond_8023ad.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index e518956..dac23ac 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -791,8 +791,11 @@ rx_machine_update(struct bond_dev_private *internals, uint8_t slave_id,
 		RTE_ASSERT(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
 
 		partner = &lacp->lacpdu.partner;
-		if (is_same_ether_addr(&partner->port_params.system, &internals->mode4.mac_addr)) {
-			/* This is LACP frame to the bonding port so pass it to rx_machine */
+		if (is_same_ether_addr(&partner->port_params.system,
+			&internals->mode4.mac_addr)) {
+			/* This LACP frame is sending to the bonding port
+			 * so pass it to rx_machine.
+			 */
 			rx_machine(internals, slave_id, &lacp->lacpdu);
 		}
 		rte_pktmbuf_free(lacp_pkt);
@@ -1144,7 +1147,6 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
 	bond_mode_8023ad_conf_assign(mode4, conf);
 	mode4->slowrx_cb = conf->slowrx_cb;
 	mode4->agg_selection = AGG_STABLE;
-	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 
 	if (dev->data->dev_started)
 		bond_mode_8023ad_start(dev);
@@ -1170,6 +1172,7 @@ bond_mode_8023ad_start(struct rte_eth_dev *bond_dev)
 	struct mode8023ad_private *mode4 = &internals->mode4;
 	static const uint64_t us = BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000;
 
+	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 	if (mode4->slowrx_cb)
 		return rte_eal_alarm_set(us, &bond_mode_8023ad_ext_periodic_cb,
 					 bond_dev);
-- 
2.7.4

[dpdk-dev] [PATCH v3 2/2] bonding: change mac_addr filled position

[Liang Zhang]

When mac_address update in bond_mode_8023ad_mac_address_update,
bonding port's mac_addr should update also.

Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
---
 drivers/net/bonding/rte_eth_bond_8023ad.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index e518956..dac23ac 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -791,8 +791,11 @@ rx_machine_update(struct bond_dev_private *internals, uint8_t slave_id,
 		RTE_ASSERT(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
 
 		partner = &lacp->lacpdu.partner;
-		if (is_same_ether_addr(&partner->port_params.system, &internals->mode4.mac_addr)) {
-			/* This is LACP frame to the bonding port so pass it to rx_machine */
+		if (is_same_ether_addr(&partner->port_params.system,
+			&internals->mode4.mac_addr)) {
+			/* This LACP frame is sending to the bonding port
+			 * so pass it to rx_machine.
+			 */
 			rx_machine(internals, slave_id, &lacp->lacpdu);
 		}
 		rte_pktmbuf_free(lacp_pkt);
@@ -1144,7 +1147,6 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
 	bond_mode_8023ad_conf_assign(mode4, conf);
 	mode4->slowrx_cb = conf->slowrx_cb;
 	mode4->agg_selection = AGG_STABLE;
-	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 
 	if (dev->data->dev_started)
 		bond_mode_8023ad_start(dev);
@@ -1170,6 +1172,7 @@ bond_mode_8023ad_start(struct rte_eth_dev *bond_dev)
 	struct mode8023ad_private *mode4 = &internals->mode4;
 	static const uint64_t us = BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000;
 
+	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 	if (mode4->slowrx_cb)
 		return rte_eal_alarm_set(us, &bond_mode_8023ad_ext_periodic_cb,
 					 bond_dev);
-- 
2.7.4

[dpdk-dev] [PATCH v2] bonding: change mac_addr filled position

[Liang Zhang]

When mac_address update in bond_mode_8023ad_mac_address_update,
bonding port's mac_addr should update also.

Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
---
 drivers/net/bonding/rte_eth_bond_8023ad.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index e518956..eefc7a2 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -791,8 +791,12 @@ rx_machine_update(struct bond_dev_private *internals, uint8_t slave_id,
 		RTE_ASSERT(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
 
 		partner = &lacp->lacpdu.partner;
-		if (is_same_ether_addr(&partner->port_params.system, &internals->mode4.mac_addr)) {
-			/* This is LACP frame to the bonding port so pass it to rx_machine */
+		if (is_same_ether_addr(&partner->port_params.system,
+			&internals->mode4.mac_addr)) {
+
+			/* This LACP frame is sending to the bonding port
+			 * so pass it to rx_machine.
+			 */
 			rx_machine(internals, slave_id, &lacp->lacpdu);
 		}
 		rte_pktmbuf_free(lacp_pkt);
@@ -1144,7 +1148,6 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
 	bond_mode_8023ad_conf_assign(mode4, conf);
 	mode4->slowrx_cb = conf->slowrx_cb;
 	mode4->agg_selection = AGG_STABLE;
-	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 
 	if (dev->data->dev_started)
 		bond_mode_8023ad_start(dev);
@@ -1170,6 +1173,7 @@ bond_mode_8023ad_start(struct rte_eth_dev *bond_dev)
 	struct mode8023ad_private *mode4 = &internals->mode4;
 	static const uint64_t us = BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000;
 
+	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 	if (mode4->slowrx_cb)
 		return rte_eal_alarm_set(us, &bond_mode_8023ad_ext_periodic_cb,
 					 bond_dev);
-- 
2.7.4

[dpdk-dev] [PATCH v2] bonding: change mac_addr filled position

[Liang Zhang]

When mac_address update in bond_mode_8023ad_mac_address_update,
bonding port's mac_addr should update also.

Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
---
 drivers/net/bonding/rte_eth_bond_8023ad.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index e518956..eefc7a2 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -791,8 +791,12 @@ rx_machine_update(struct bond_dev_private *internals, uint8_t slave_id,
 		RTE_ASSERT(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
 
 		partner = &lacp->lacpdu.partner;
-		if (is_same_ether_addr(&partner->port_params.system, &internals->mode4.mac_addr)) {
-			/* This is LACP frame to the bonding port so pass it to rx_machine */
+		if (is_same_ether_addr(&partner->port_params.system,
+			&internals->mode4.mac_addr)) {
+
+			/* This LACP frame is sending to the bonding port
+			 * so pass it to rx_machine.
+			 */
 			rx_machine(internals, slave_id, &lacp->lacpdu);
 		}
 		rte_pktmbuf_free(lacp_pkt);
@@ -1144,7 +1148,6 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
 	bond_mode_8023ad_conf_assign(mode4, conf);
 	mode4->slowrx_cb = conf->slowrx_cb;
 	mode4->agg_selection = AGG_STABLE;
-	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 
 	if (dev->data->dev_started)
 		bond_mode_8023ad_start(dev);
@@ -1170,6 +1173,7 @@ bond_mode_8023ad_start(struct rte_eth_dev *bond_dev)
 	struct mode8023ad_private *mode4 = &internals->mode4;
 	static const uint64_t us = BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000;
 
+	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 	if (mode4->slowrx_cb)
 		return rte_eal_alarm_set(us, &bond_mode_8023ad_ext_periodic_cb,
 					 bond_dev);
-- 
2.7.4

[dpdk-dev] [PATCH] bonding: fix lacp negotiation failed

[Liang Zhang]

When monitor(port-mirroring) traffic from other lacp port-channel,
rx_machine_update may recieving other lacp negotiation packets.
Thus bond mode 4 will negotiation failed.

Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
---
 drivers/net/bonding/rte_eth_bond_8023ad.c         | 12 ++++++++++--
 drivers/net/bonding/rte_eth_bond_8023ad_private.h |  1 +
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index dd847c6..dac23ac 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -784,13 +784,20 @@ static void
 rx_machine_update(struct bond_dev_private *internals, uint8_t slave_id,
 		struct rte_mbuf *lacp_pkt) {
 	struct lacpdu_header *lacp;
+	struct lacpdu_actor_partner_params *partner;
 
 	if (lacp_pkt != NULL) {
 		lacp = rte_pktmbuf_mtod(lacp_pkt, struct lacpdu_header *);
 		RTE_ASSERT(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
 
-		/* This is LACP frame so pass it to rx_machine */
-		rx_machine(internals, slave_id, &lacp->lacpdu);
+		partner = &lacp->lacpdu.partner;
+		if (is_same_ether_addr(&partner->port_params.system,
+			&internals->mode4.mac_addr)) {
+			/* This LACP frame is sending to the bonding port
+			 * so pass it to rx_machine.
+			 */
+			rx_machine(internals, slave_id, &lacp->lacpdu);
+		}
 		rte_pktmbuf_free(lacp_pkt);
 	} else
 		rx_machine(internals, slave_id, NULL);
@@ -1165,6 +1172,7 @@ bond_mode_8023ad_start(struct rte_eth_dev *bond_dev)
 	struct mode8023ad_private *mode4 = &internals->mode4;
 	static const uint64_t us = BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000;
 
+	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 	if (mode4->slowrx_cb)
 		return rte_eal_alarm_set(us, &bond_mode_8023ad_ext_periodic_cb,
 					 bond_dev);
diff --git a/drivers/net/bonding/rte_eth_bond_8023ad_private.h b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
index c51426b..f91902e 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad_private.h
+++ b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
@@ -150,6 +150,7 @@ struct mode8023ad_private {
 	uint64_t update_timeout_us;
 	rte_eth_bond_8023ad_ext_slowrx_fn slowrx_cb;
 	uint8_t external_sm;
+	struct ether_addr mac_addr;
 
 	struct rte_eth_link slave_link;
 	/***< slave link properties */
-- 
2.7.4

[dpdk-dev] [PATCH] bonding: fix lacp negotiation failed

[Liang Zhang]

When monitor(port-mirroring) traffic from other lacp port-channel,
rx_machine_update may recieving other lacp negotiation packets.
Thus bond mode 4 will negotiation failed.

Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
---
 drivers/net/bonding/rte_eth_bond_8023ad.c         | 12 ++++++++++--
 drivers/net/bonding/rte_eth_bond_8023ad_private.h |  1 +
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index dd847c6..dac23ac 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -784,13 +784,20 @@ static void
 rx_machine_update(struct bond_dev_private *internals, uint8_t slave_id,
 		struct rte_mbuf *lacp_pkt) {
 	struct lacpdu_header *lacp;
+	struct lacpdu_actor_partner_params *partner;
 
 	if (lacp_pkt != NULL) {
 		lacp = rte_pktmbuf_mtod(lacp_pkt, struct lacpdu_header *);
 		RTE_ASSERT(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
 
-		/* This is LACP frame so pass it to rx_machine */
-		rx_machine(internals, slave_id, &lacp->lacpdu);
+		partner = &lacp->lacpdu.partner;
+		if (is_same_ether_addr(&partner->port_params.system,
+			&internals->mode4.mac_addr)) {
+			/* This LACP frame is sending to the bonding port
+			 * so pass it to rx_machine.
+			 */
+			rx_machine(internals, slave_id, &lacp->lacpdu);
+		}
 		rte_pktmbuf_free(lacp_pkt);
 	} else
 		rx_machine(internals, slave_id, NULL);
@@ -1165,6 +1172,7 @@ bond_mode_8023ad_start(struct rte_eth_dev *bond_dev)
 	struct mode8023ad_private *mode4 = &internals->mode4;
 	static const uint64_t us = BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000;
 
+	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
 	if (mode4->slowrx_cb)
 		return rte_eal_alarm_set(us, &bond_mode_8023ad_ext_periodic_cb,
 					 bond_dev);
diff --git a/drivers/net/bonding/rte_eth_bond_8023ad_private.h b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
index c51426b..f91902e 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad_private.h
+++ b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
@@ -150,6 +150,7 @@ struct mode8023ad_private {
 	uint64_t update_timeout_us;
 	rte_eth_bond_8023ad_ext_slowrx_fn slowrx_cb;
 	uint8_t external_sm;
+	struct ether_addr mac_addr;
 
 	struct rte_eth_link slave_link;
 	/***< slave link properties */
-- 
2.7.4

Re: [dpdk-dev] [PATCH] bonding: fix lacp negotiation failed

[Chas Williams]

On 3/15/19 5:06 AM, Liang Zhang wrote:
> When monitor(port-mirroring) traffic from other lacp port-channel,
> rx_machine_update may recieving other lacp negotiation packets.
> Thus bond mode 4 will negotiation failed.
> 
> Signed-off-by: Liang Zhang <zhangliang@bigo.sg>

Acked-by: Chas Williams <chas3@att.com>

> ---
>   drivers/net/bonding/rte_eth_bond_8023ad.c         | 12 ++++++++++--
>   drivers/net/bonding/rte_eth_bond_8023ad_private.h |  1 +
>   2 files changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
> index dd847c6..dac23ac 100644
> --- a/drivers/net/bonding/rte_eth_bond_8023ad.c
> +++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
> @@ -784,13 +784,20 @@ static void
>   rx_machine_update(struct bond_dev_private *internals, uint8_t slave_id,
>   		struct rte_mbuf *lacp_pkt) {
>   	struct lacpdu_header *lacp;
> +	struct lacpdu_actor_partner_params *partner;
>   
>   	if (lacp_pkt != NULL) {
>   		lacp = rte_pktmbuf_mtod(lacp_pkt, struct lacpdu_header *);
>   		RTE_ASSERT(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
>   
> -		/* This is LACP frame so pass it to rx_machine */
> -		rx_machine(internals, slave_id, &lacp->lacpdu);
> +		partner = &lacp->lacpdu.partner;
> +		if (is_same_ether_addr(&partner->port_params.system,
> +			&internals->mode4.mac_addr)) {
> +			/* This LACP frame is sending to the bonding port
> +			 * so pass it to rx_machine.
> +			 */
> +			rx_machine(internals, slave_id, &lacp->lacpdu);
> +		}
>   		rte_pktmbuf_free(lacp_pkt);
>   	} else
>   		rx_machine(internals, slave_id, NULL);
> @@ -1165,6 +1172,7 @@ bond_mode_8023ad_start(struct rte_eth_dev *bond_dev)
>   	struct mode8023ad_private *mode4 = &internals->mode4;
>   	static const uint64_t us = BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000;
>   
> +	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
>   	if (mode4->slowrx_cb)
>   		return rte_eal_alarm_set(us, &bond_mode_8023ad_ext_periodic_cb,
>   					 bond_dev);
> diff --git a/drivers/net/bonding/rte_eth_bond_8023ad_private.h b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
> index c51426b..f91902e 100644
> --- a/drivers/net/bonding/rte_eth_bond_8023ad_private.h
> +++ b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
> @@ -150,6 +150,7 @@ struct mode8023ad_private {
>   	uint64_t update_timeout_us;
>   	rte_eth_bond_8023ad_ext_slowrx_fn slowrx_cb;
>   	uint8_t external_sm;
> +	struct ether_addr mac_addr;
>   
>   	struct rte_eth_link slave_link;
>   	/***< slave link properties */
> 

Re: [dpdk-dev] [PATCH] bonding: fix lacp negotiation failed

[Chas Williams]

On 3/15/19 5:06 AM, Liang Zhang wrote:
> When monitor(port-mirroring) traffic from other lacp port-channel,
> rx_machine_update may recieving other lacp negotiation packets.
> Thus bond mode 4 will negotiation failed.
> 
> Signed-off-by: Liang Zhang <zhangliang@bigo.sg>

Acked-by: Chas Williams <chas3@att.com>

> ---
>   drivers/net/bonding/rte_eth_bond_8023ad.c         | 12 ++++++++++--
>   drivers/net/bonding/rte_eth_bond_8023ad_private.h |  1 +
>   2 files changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
> index dd847c6..dac23ac 100644
> --- a/drivers/net/bonding/rte_eth_bond_8023ad.c
> +++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
> @@ -784,13 +784,20 @@ static void
>   rx_machine_update(struct bond_dev_private *internals, uint8_t slave_id,
>   		struct rte_mbuf *lacp_pkt) {
>   	struct lacpdu_header *lacp;
> +	struct lacpdu_actor_partner_params *partner;
>   
>   	if (lacp_pkt != NULL) {
>   		lacp = rte_pktmbuf_mtod(lacp_pkt, struct lacpdu_header *);
>   		RTE_ASSERT(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
>   
> -		/* This is LACP frame so pass it to rx_machine */
> -		rx_machine(internals, slave_id, &lacp->lacpdu);
> +		partner = &lacp->lacpdu.partner;
> +		if (is_same_ether_addr(&partner->port_params.system,
> +			&internals->mode4.mac_addr)) {
> +			/* This LACP frame is sending to the bonding port
> +			 * so pass it to rx_machine.
> +			 */
> +			rx_machine(internals, slave_id, &lacp->lacpdu);
> +		}
>   		rte_pktmbuf_free(lacp_pkt);
>   	} else
>   		rx_machine(internals, slave_id, NULL);
> @@ -1165,6 +1172,7 @@ bond_mode_8023ad_start(struct rte_eth_dev *bond_dev)
>   	struct mode8023ad_private *mode4 = &internals->mode4;
>   	static const uint64_t us = BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000;
>   
> +	rte_eth_macaddr_get(internals->port_id, &mode4->mac_addr);
>   	if (mode4->slowrx_cb)
>   		return rte_eal_alarm_set(us, &bond_mode_8023ad_ext_periodic_cb,
>   					 bond_dev);
> diff --git a/drivers/net/bonding/rte_eth_bond_8023ad_private.h b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
> index c51426b..f91902e 100644
> --- a/drivers/net/bonding/rte_eth_bond_8023ad_private.h
> +++ b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
> @@ -150,6 +150,7 @@ struct mode8023ad_private {
>   	uint64_t update_timeout_us;
>   	rte_eth_bond_8023ad_ext_slowrx_fn slowrx_cb;
>   	uint8_t external_sm;
> +	struct ether_addr mac_addr;
>   
>   	struct rte_eth_link slave_link;
>   	/***< slave link properties */
> 

Re: [dpdk-dev] [PATCH] bonding: fix lacp negotiation failed

[Kevin Traynor]

On 15/03/2019 09:06, Liang Zhang wrote:
> When monitor(port-mirroring) traffic from other lacp port-channel,
> rx_machine_update may recieving other lacp negotiation packets.
> Thus bond mode 4 will negotiation failed.
> 

Please add a 'Fixes:' tag, and if appropriate for backport to stable
branches, also a 'Cc: stable@dpdk.org' tag.

> Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
> ---

Re: [dpdk-dev] [PATCH] bonding: fix lacp negotiation failed

[Kevin Traynor]

On 15/03/2019 09:06, Liang Zhang wrote:
> When monitor(port-mirroring) traffic from other lacp port-channel,
> rx_machine_update may recieving other lacp negotiation packets.
> Thus bond mode 4 will negotiation failed.
> 

Please add a 'Fixes:' tag, and if appropriate for backport to stable
branches, also a 'Cc: stable@dpdk.org' tag.

> Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
> ---